blob: afdbc4de8f42a2d537aa7b9a99ca4428669a8119 [file] [log] [blame]
-32768 svTempDisable Temporarily disable card but run primary init.
-32640 svDisabled Reserve range -32640 to -32768 for Apple temp disables.
-32615 fontNotOutlineErr bitmap font passed to routine that does outlines only
-20002 invalidIndexErr The recordIndex parameter is not valid.
-20001 recordDataTooBigErr The record data is bigger than buffer size (1024 bytes).
-20000 unknownInsertModeErr There is no such an insert mode.
-13005 pmRecvEndErr during receive, pmgr did not finish hs configured for this connection
-13004 pmRecvStartErr during receive, pmgr did not start hs
-13003 pmSendEndErr during send, pmgr did not finish hs
-13002 pmSendStartErr during send, pmgr did not start hs
-13001 pmReplyTOErr Timed out waiting for reply
-13000 pmBusyErr Power Mgr never ready to start handshake
-11005 pictureDataErr the picture data was invalid
-11004 colorsRequestedErr the number of colors requested was illegal
-11003 cantLoadPickMethodErr unable to load the custom pick proc
-11002 pictInfoVerbErr the passed verb was invalid
-11001 pictInfoIDErr the internal consistancy check for the PictInfoID is wrong
-11000 pictInfoVersionErr wrong version of the PictInfo structure
-10116 telNotEnoughdspBW not enough real-time for allocation
-10115 telBadSampleRate incompatible sample rate
-10114 telBadSWErr Software not installed properly
-10113 telDetAlreadyOn detection is already turned on
-10112 telAutoAnsNotOn autoAnswer in not turned on
-10111 telValidateFailed telValidate failed
-10110 telBadProcID invalid procID
-10109 telDeviceNotFound device not found
-10108 telBadCodeResource code resource not found
-10107 telInitFailed initialization failed
-10106 telNoCommFolder Communications/Extensions Ÿ not found
-10103 telUnknownErr unable to set config
-10102 telNoSuchTool unable to find tool with name specified
-10091 telBadFunction bad msgCode specified
-10090 telPBErr parameter block error, bad format
-10082 telCANotDeflectable CA not "deflectable"
-10081 telCANotRejectable CA not "rejectable"
-10080 telCANotAcceptable CA not "acceptable"
-10072 telTermNotOpen terminal not opened via TELOpenTerm
-10071 telStillNeeded terminal driver still needed by someone else
-10070 telAlreadyOpen terminal already open
-10064 telNoCallbackRef no call back reference was specified, but is required
-10063 telDisplayModeNotSupp display mode not supported by tool
-10062 telBadDisplayMode bad display mode specified
-10061 telFwdTypeNotSupp forward type not supported by tool
-10060 telDNTypeNotSupp DN type not supported by tool
-10059 telBadRate bad rate specified
-10058 telBadBearerType bad bearerType specified
-10057 telBadSelect unable to select or deselect DN
-10056 telBadParkID bad park id specified
-10055 telBadPickupGroupID bad pickup group ID specified
-10054 telBadFwdType bad fwdType specified
-10053 telBadFeatureID bad feature ID specified
-10052 telBadIntercomID bad intercom ID specified
-10051 telBadPageID bad page ID specified
-10050 telBadDNType DN type invalid
-10047 telConfLimitExceeded attempt to exceed switch conference limits
-10046 telCBErr call back feature not set previously
-10045 telTransferRej transfer request rejected
-10044 telTransferErr transfer not prepared
-10043 telConfRej conference request was rejected
-10042 telConfErr conference was not prepared
-10041 telConfNoLimit no limit was specified but required
-10040 telConfLimitErr limit specified is too high for this configuration
-10033 telFeatNotSupp feature program call not supported by this tool
-10032 telFeatActive feature already active
-10031 telFeatNotAvail feature subscribed but not available
-10030 telFeatNotSub feature not subscribed
-10024 telDNDTypeNotSupp DND type is not supported by this tool
-10023 telBadDNDType bad DND type specified
-10022 telIntExtNotSupp internal external type not supported by this tool
-10021 telBadIntExt bad internal external error
-10020 telStateNotSupp device state not supported by tool
-10019 telBadStateErr bad device state specified
-10018 telIndexNotSupp index not supported by this tool
-10017 telBadIndex bad index specified
-10016 telAPattNotSupp alerting pattern not supported by tool
-10015 telBadAPattErr bad alerting pattern specified
-10014 telVTypeNotSupp volume type not supported by this tool
-10013 telBadVTypeErr bad volume type error
-10012 telBadLevelErr bad volume level setting
-10011 telHTypeNotSupp hook type not supported by this tool
-10010 telBadHTypeErr bad hook type specified
-10008 telNoOpenErr unable to open terminal
-10007 telNoMemErr no memory to allocate handle
-10006 telCAUnavail a CA is not available
-10005 telBadProcErr bad msgProc specified
-10004 telBadHandErr bad handle specified
-10003 telBadCAErr TELCAHandle not found or invalid
-10002 telBadDNErr TELDNHandle not found or invalid
-10001 telBadTermErr invalid TELHandle or handle not found
-6231 kDMMainDisplayCannotMoveErr Trying to move main display (or a display mirrored to it)
-6230 kDMDisplayAlreadyInstalledErr Attempt to add an already installed display.
-6229 kDMDisplayNotFoundErr Could not find item (will someday remove).
-6228 kDMDriverNotDisplayMgrAwareErr Video Driver does not support display manager.
-6227 kDMSWNotInitializedErr Required software not initialized (eg windowmanager or display mgr).
-6226 kSysSWTooOld Missing critical pieces of System Software.
-6225 kDMMirroringNotOn Returned by all calls that need mirroring to be on to do their thing.
-6224 kDMCantBlock Mirroring is already on, can¹t Block now (call DMUnMirror() first).
-6223 kDMMirroringBlocked DMBlockMirroring() has been called.
-6222 kDMWrongNumberOfDisplays Can only handle 2 displays for now.
-6221 kDMMirroringOnAlready Returned by all calls that need mirroring to be off to do their thing.
-6220 kDMGenErr Unexpected Error
-5553 gestaltLocationErr gestalt function ptr wasn't in sysheap
-5552 gestaltDupSelectorErr tried to add an entry that already existed
-5551 gestaltUndefSelectorErr undefined selector was passed to Gestalt
-5550 gestaltUnknownErr value returned if Gestalt doesn't know the answer
-5502 envVersTooBig Version bigger than call can handle
-5501 envBadVers Version non-positive
-5500 envNotPresent returned by glue.
-5044 afpInsideTrashErr the folder being shared is inside the trash folder OR the shared folder is being moved into the trash folder OR the folder is being moved to the trash and it contains a shared folder
-5043 afpInsideSharedErr the folder being shared is inside a shared folder OR the folder contains a shared folder and is being moved into a shared folder OR the folder contains a shared folder and is being moved into the descendent of a shared folder.
-5042 afpPwdExpiredErr the password being used is too old: this requires the user to change the password before log-in can continue
-5041 afpPwdTooShortErr the password being set is too short: there is a minimum length that must be met or exceeded
-5040 afpPwdSameErr someone tried to change their password to the same password on a mantadory password change
-5033 afpContainsSharedErr the folder being shared contains a shared folder
-5032 afpObjectLocked Object is M/R/D/W inhibited
-5031 afpVolLocked Volume is Read-Only
-3026 couldNotParseSourceFileErr Source document does not contain source type
-3025 invalidTranslationPathErr Source type to destination type not a valid path
-2899 fragLastErrCode last reserved error code number
-2824 fragInvalidFragmentUsage an application fragment or accellerated resource has no entry point or termination routine
-2823 fragArchError fragment targeted for an unacceptable architecture
-2822 fragAppNotFound no application found in cfrg (for Process Manager)
-2821 fragUserInitProcErr user intialization routine did not return noErr
-2820 fragCorruptErr fragment container corrupted (known format)
-2819 fragConstErr internal inconstistancy
-2818 fragMgrInitErr error in initailization of this manager
-2817 fragLibConnErr error connecting to library (error occured in sub prepare)
-2816 fragInitRtnUsageErr boot library has initialization routine
-2815 fragInitLoop circularity detected in mandatory initialization order
-2814 fragImportTooNew import library was too new and therefore incompatible
-2813 fragImportTooOld import library was too old and therefore incompatible
-2812 fragObjectInitSeqErr order error during user initialization function invocation
-2811 fragNoContextIDs no more context id¹s
-2810 fragNoAddrSpace out of memory in user's address space for loadable section
-2809 fragNoMem out of memory for interal bookkeeping
-2808 fragUnused1 unused
-2807 fragHadUnresolveds loaded fragment had "hard" unresolved imports
-2806 fragFormatUnknown fragment container format unknown
-2805 fragDupRegLibName registered name already in use
-2804 fragLibNotFound library name not found in Frag registry
-2803 fragSectionNotFound section was not found
-2802 fragSymbolNotFound symbol was not found in connection
-2801 fragConnectionIDNotFound connecionID was not valid
-2800 fragContextNotFound contextID was not valid
-2551 nrPathBufferTooSmall buffer for path is too small
-2550 nrPathNotFound a path component lookup failed
-2519 tsmUnknownErr any other errors
-2518 tsmUnsupportedTypeErr unSupported interface type error
-2517 tsmScriptHasNoIMErr script has no imput method or is using old IM
-2516 tsmInputMethodIsOldErr returned by GetDefaultInputMethod
-2515 tsmComponentAlreadyOpenErr text service already opened for the document
-2514 tsmTSNotOpenErr text service is not open
-2513 tsmTSHasNoMenuErr the text service has no menu
-2512 tsmUseInputWindowErr not TSM aware because we are using input window
-2511 tsmDocumentOpenErr there are open documents
-2510 tsmTextServiceNotFoundErr no text service found
-2509 tsmCantOpenComponentErr can¹t open the component
-2508 tsmNoOpenTSErr no open text service
-2507 tsmDocNotActiveErr document is NOT active
-2506 tsmTSMDocBusyErr document is still active
-2505 tsmInvalidDocIDErr invalid TSM documentation id
-2504 tsmNeverRegisteredErr app never registered error (not TSM aware)
-2503 tsmAlreadyRegisteredErr want to register again error
-2502 tsmNotAnAppErr not an application error
-2209 badCallOrderErr Usually due to a status call being called prior to being setup first
-2208 noDMAErr Can¹t do DMA digitizing (i.e. can't go to requested dest
-2207 badDepthErr Can¹t digitize into this depth
-2206 notExactSizeErr Can¹t do exact size requested
-2205 noMoreKeyColorsErr all key indexes in use
-2204 notExactMatrixErr warning of bad matrix, digitizer did its best
-2203 matrixErr bad matrix, digitizer did nothing
-2202 qtParamErr bad input parameter (out of range, etc)
-2201 digiUnimpErr feature unimplemented
-2056 soundSupportNotAvailableErr QT for Windows error
-2055 noSoundTrackInMovieErr QT for Windows error
-2054 noVideoTrackInMovieErr QT for Windows error
-2022 cantCreateSingleForkFile happens when file already exists
-1857 dragNotAcceptedErr drag was not accepted by receiver
-1856 handlerNotFoundErr handler not found
-1855 duplicateHandlerErr handler already exists
-1854 cantGetFlavorErr error while trying to get flavor data
-1853 duplicateFlavorErr flavor type already exists
-1852 badDragFlavorErr unknown flavor type
-1851 badDragItemErr unknown drag item reference
-1850 badDragRefErr unknown drag reference
-1762 errOSACantOpenComponent Can't connect to scripting system with that ID
-1761 errOSAComponentMismatch Parameters are from 2 different components
-1732 errAERecordingIsAlreadyOn available only in version 1.0.1 or greater
-1731 errAEUnknownObjectType available only in version 1.0.1 or greater
-1730 errAEEmptyListContainer Attempt to pass empty list as container to accessor
-1729 errAENegativeCount CountProc returned negative value
-1728 errAENoSuchObject e.g.,: specifier asked for the 3rd, but there are only 2. Basically, this indicates a run-time resolution error.
-1727 errAENotAnObjSpec Param to AEResolve not of type 'obj '
-1726 errAEBadTestKey Test is neither typeLogicalDescriptor nor typeCompDescriptor
-1725 errAENoSuchLogical Something other than AND, OR, or NOT
-1723 errAEAccessorNotFound Accessor proc matching wantClass and containerType or wildcards not found
-1721 errAEWrongNumberArgs Logical op kAENOT used with other than 1 term
-1720 errAEImpossibleRange A range like 3rd to 2nd, or 1st to all.
-1719 errAEIllegalIndex index is out of range in a put operation
-1718 errAEReplyNotArrived the contents of the reply you are accessing have not arrived yet
-1717 errAEHandlerNotFound no handler in the dispatch tables fits the parameters to AEGetEventHandler or AEGetCoercionHandler
-1716 errAEUnknownAddressType the target address type is not known
-1715 errAEParamMissed a required parameter was not accessed
-1714 errAENotASpecialFunction there is no special function for/with this keyword
-1713 errAENoUserInteraction no user interaction is allowed
-1712 errAETimeout the AppleEvent timed out
-1711 errAEWaitCanceled in AESend, the user cancelled out of wait loop for reply or receipt
-1710 errAEUnknownSendMode mode wasn't NoReply, WaitReply, or QueueReply or Interaction level is unknown
-1709 errAEReplyNotValid AEResetTimer was passed an invalid reply parameter
-1708 errAEEventNotHandled the AppleEvent was not handled by any handler
-1707 errAENotAppleEvent the event is not in AppleEvent format
-1706 errAENewerVersion need newer version of the AppleEvent manager
-1705 errAEBadListItem the specified list item does not exist
-1700 errAECoercionFail bad parameter data or unable to coerce the data supplied
-1310 fsDataTooBigErr file or volume is too big for system
-1309 fileBoundsErr file's EOF, offset, mark or size is too big
-1308 notARemountErr when _Mount allows only remounts and doesn't get one
-1307 badFidErr file id is dangling or doesn't match with the file number
-1306 sameFileErr can't exchange a file with itself
-1305 desktopDamagedErr desktop database files are corrupted
-1304 catChangedErr the catalog has been modified
-1303 diffVolErr files on different volumes
-1302 notAFileErr directory specified
-1301 fidExists file id already exists
-1300 fidNotFound no file thread exists.
-1280 errRefNum bad connection refNum
-1279 errAborted control call was aborted
-1278 errState bad connection state for this operation
-1277 errOpening open connection request failed
-1276 errAttention attention message too long
-1275 errFwdReset read terminated by forward reset
-1274 errDSPQueueSize DSP Read/Write Queue Too small
-1273 errOpenDenied open connection request was denied
-1075 aspNoAck No ack on attention request (server err)
-1074 aspTooMany Too many clients (server error)
-1073 aspSizeErr Command block too big
-1072 aspSessClosed Session closed
-1071 aspServerBusy Server cannot open another session
-1070 aspParamErr Parameter error
-1069 aspNoServers No servers at that address
-1068 aspNoMoreSess No more sessions on server
-1067 aspBufTooSmall Buffer too small
-1066 aspBadVersNum Server cannot support this ASP version
-1029 nbpNISErr Error trying to open the NIS
-1028 nbpNotFound Name not found on remove
-1027 nbpDuplicate Duplicate name exists already
-1026 nbpConfDiff Name confirmed at different socket
-1024 nbpBuffOvr Buffer overflow in LookupName
-1000 noMaskFoundErr Icon Utilties Error
-932 guestNotAllowedErr destination port requires authentication
-931 badLocNameErr location name malformed
-930 badServiceMethodErr illegal service type, or not supported
-928 noUserRecErr Invalid user reference number
-927 authFailErr unable to authenticate user at destination
-926 noInformErr PPCStart failed because destination did not have inform pending
-925 networkErr An error has occured in the network, not too likely
-924 noUserRefErr unable to create a new userRefNum
-923 notLoggedInErr The default userRefNum does not yet exist
-922 noDefaultUserErr user hasn't typed in owners name in Network Setup Control Pannel
-919 badPortNameErr PPCPortRec malformed
-917 sessClosedErr session was closed
-916 portClosedErr port was closed
-915 noResponseErr unable to contact destination
-914 noToolboxNameErr A system resource is missing, not too likely
-913 noMachineNameErr user hasn't named his Macintosh in the Network Setup Control Panel
-912 userRejectErr Destination rejected the session request
-911 noUserNameErr user name unknown on destination machine
-910 portNameExistsErr port is already open (perhaps in another app)
-909 badReqErr bad parameter or invalid state for operation
-908 noSessionErr Invalid session reference number
-907 sessTableErr Out of session tables, try again later
-906 destPortErr Port does not exist at destination
-905 localOnlyErr Network activity is currently disabled
-904 noGlobalsErr The system is hosed, better re-boot
-903 noPortErr Unable to open port or bad portRefNum
-902 nameTypeErr Invalid or inappropriate locationKindSelector in locationName
-900 notInitErr PPCToolBox not initialized
-863 hmCloseViewActive Returned from HMRemoveBalloon if CloseView was active
-862 hmNoBalloonUp Returned from HMRemoveBalloon if no balloon was visible when call was made
-861 hmOperationUnsupported Returned from HMShowBalloon call if bad method passed to routine
-859 hmUnknownHelpType Returned if help msg record contained a bad type
-858 hmWrongVersion Returned if help mgr resource was the wrong version
-857 hmSkippedBalloon Returned from calls if helpmsg specified a skip balloon
-855 hmHelpManagerNotInited Returned from HMGetHelpMenuHandle if help menu not setup
-854 hmSameAsLastBalloon Returned from HMShowMenuBalloon if menu & item is same as last time
-853 hmBalloonAborted Returned if mouse was moving or mouse wasn't in window port rect
-850 hmHelpDisabled Show Balloons mode was off, call to routine ignored
-813 rcDBPackNotInited attempt to call other routine before InitDBPack
-812 rcDBWrongVersion incompatible versions
-811 rcDBNoHandler no app handler for specified data type
-810 rcDBBadAsyncPB tried to kill a bad pb
-809 rcDBAsyncNotSupp ddev does not support async calls
-808 rcDBBadDDEV bad ddev specified on DBInit
-807 rcDBBadSessNum bad session number for DBGetConnInfo
-626 noMMUErr no MMU present
-625 cannotDeferErr unable to defer additional functions
-624 interruptsMaskedErr don¹t call with interrupts masked
-623 notLockedErr specified range of memory is not locked
-622 cannotMakeContiguousErr cannot make specified range contiguous
-621 notHeldErr specified range of memory is not held
-620 notEnoughMemoryErr insufficient physical memory
-610 noUserInteractionAllowed no user interaction allowed
-607 bufferIsSmall error returns from Post and Accept
-606 appIsDaemon app is BG-only, and launch flags disallow this
-605 appMemFullErr application SIZE not big enough for launch
-604 hardwareConfigErr hardware configuration not correct for call
-603 protocolErr app made module calls in improper order
-602 appModeErr memory mode is 32-bit, but app not 32-bit clean
-601 memFragErr not enough room to launch app w/special requirements
-600 procNotFound no eligible process with specified descriptor
-502 hwParamErr bad selector for _HWPriv
-501 teScrapSizeErr scrap item too big for text edit record
-492 exUserBreak user debugger break; execute debugger commands on stack
-491 strUserBreak user debugger break; display string on stack
-490 userBreak user debugger break
-463 notThePublisherWrn not the first registered publisher for that container
-462 containerAlreadyOpenWrn container already opened by this section
-461 containerNotFoundWrn could not find editionContainer at this time
-460 multiplePublisherWrn A Publisher is already registered for that container
-454 badSubPartErr can not use sub parts in this release
-453 badEditionFileErr edition file is corrupt
-452 notRegisteredSectionErr not a registered SectionRecord
-451 badSectionErr not a valid SectionRecord
-450 editionMgrInitErr edition manager not inited by this app
-417 btKeyAttrErr There is no such a key attribute.
-416 btKeyLenErr Maximum key length is too long or equal to zero.
-415 btRecNotFnd Record cannot be found.
-414 btDupRecErr Record already exists.
-413 btNoSpace Can't allocate disk space.
-410 notBTree The file is not a dictionary.
-400 gcrOnMFMErr gcr format on high density media error
-360 slotNumErr invalid slot # error
-351 smRecNotFnd Record not found in the SRT.
-350 smSRTOvrFlErr SRT over flow.
-349 smNoGoodOpens No opens were successfull in the loop.
-348 smOffsetErr Offset was too big (temporary error
-347 smByteLanesErr NumByteLanes was determined to be zero.
-346 smBadsPtrErr Bad pointer was passed to sCalcsPointer
-345 smsGetDrvrErr Error occurred during _sGetDriver.
-344 smNoMoresRsrcs No more sResources
-343 smDisDrvrNamErr Error occured during _sDisDrvrName.
-342 smGetDrvrNamErr Error occured during _sGetDrvrName.
-341 smCkStatusErr Status of slot = fail.
-340 smBlkMoveErr _BlockMove error
-339 smNewPErr _NewPtr error
-338 smSelOOBErr Selector out of bounds error
-337 smSlotOOBErr Slot out of bounds error
-336 smNilsBlockErr Nil sBlock error (Dont allocate and try to use a nil sBlock)
-335 smsPointerNil LPointer is nil From sOffsetData. If this error occurs; check sInfo rec for more information.
-334 smCPUErr Code revision is wrong
-333 smCodeRevErr Code revision is wrong
-332 smReservedErr Reserved field not zero
-331 smBadsList Bad sList: Id1 < Id2 < Id3 ...format is not followed.
-330 smBadRefId Reference Id not found in List
-320 smBusErrTO BusError time out.
-319 smBadBoardId BoardId was wrong; re-init the PRAM record.
-318 smNoJmpTbl SDM jump table could not be created.
-317 smInitTblVErr An error occured while trying to initialize the Slot Resource Table.
-316 smInitStatVErr The InitStatusV field was negative after primary or secondary init.
-315 smNoBoardId No Board Id.
-314 smGetPRErr Error occured during _sGetPRAMRec (See SIMStatus).
-313 smNoBoardSRsrc No Board sResource.
-312 smDisposePErr _DisposePointer error
-311 smFHBlkDispErr Error occured during _sDisposePtr (Dispose of FHeader block).
-310 smFHBlockRdErr Error occured during _sGetFHeader.
-309 smBLFieldBad ByteLanes field was bad.
-308 smUnExBusErr Unexpected BusError
-307 smResrvErr Fatal reserved error. Resreved field <> 0.
-306 smNosInfoArray No sInfoArray. Memory Mgr error.
-305 smDisabledSlot This slot is disabled (-305 use to be smLWTstBad)
-304 smNoDir Directory offset is Nil
-303 smRevisionErr Wrong revison level
-302 smFormatErr FHeader Format is not Apple's
-301 smCRCFail CRC check failed for declaration data
-300 smEmptySlot No card in slot
-299 nmTypErr wrong queue type
-293 smPriInitErr Error; Cards could not be initialized.
-292 smPRAMInitErr Error; Slot Resource Table could not be initialized.
-291 smSRTInitErr Error; Slot Resource Table could not be initialized.
-290 smSDMInitErr Error; SDM could not be initialized.
-261 midiInvalidCmdErr command not supported for port type
-260 midiDupIDErr duplicate client ID
-259 midiNameLenErr name supplied is longer than 31 characters
-258 midiWriteErr MIDIWritePacket couldn't write to all connected ports
-257 midiNoConErr no connection exists between specified ports
-256 midiVConnectRmvd pending virtual connection removed
-255 midiVConnectMade pending virtual connection resolved
-254 midiVConnectErr pending virtual connection created
-253 midiTooManyConsErr too many connections made
-252 midiTooManyPortsErr too many ports already installed in the system
-251 midiNoPortErr no port with that ID found
-250 midiNoClientErr no client with that ID found
-232 siUnknownQuality invalid quality selector (returned by driver)
-231 siUnknownInfoType invalid info type selector (returned by driver)
-230 siInputDeviceErr input device hardware failure
-229 siBadRefNum invalid input device reference number
-228 siBadDeviceName input device could not be opened
-227 siDeviceBusyErr input device already in use
-226 siInvalidSampleSize invalid sample size
-225 siInvalidSampleRate invalid sample rate
-224 siHardDriveTooSlow hard drive too slow to record to disk
-223 siInvalidCompression invalid compression type
-222 siNoBufferSpecified returned by synchronous SPBRecord if nil buffer passed
-221 siBadSoundInDevice invalid index passed to SoundInGetIndexedDevice
-220 siNoSoundInHardware no Sound Input hardware
-212 noMoreRealTime not enough CPU cycles left to add another task
-210 buffersTooSmall can not operate in the memory allowed
-209 channelBusy the Channel is being used for a PFD already
-208 badFileFormat was not type AIFF or was of bad format,corrupt
-207 notEnoughBufferSpace could not allocate enough memory
-206 badFormat Sound Manager Error Returns
-205 badChannel Sound Manager Error Returns
-204 resProblem Sound Manager Error Returns
-203 queueFull Sound Manager Error Returns
-201 notEnoughHardwareErr Sound Manager Error Returns
-200 noHardwareErr Sound Manager Error Returns
-199 mapReadErr map inconsistent with operation
-198 resAttrErr attribute inconsistent with operation
-197 rmvRefFailed RmveReference failed
-196 rmvResFailed RmveResource failed
-195 addRefFailed AddReference failed
-194 addResFailed AddResource failed
-193 resFNotFound Resource file not found
-192 resNotFound Resource not found
-190 inputOutOfBounds Offset of Count out of bounds
-189 writingPastEnd Writing past end of file
-188 resourceInMemory Resource already in memory
-186 CantDecompress resource bent ("the bends") - can't decompress a compressed resource
-185 badExtResource extended resource has a bad format.
-157 cDepthErr invalid pixel depth
-156 cResErr invalid resolution for MakeITable
-155 cDevErr invalid type of graphics device
-154 cProtectErr colorTable entry protection violation
-153 cRangeErr range error on colorTable request
-152 cNoMemErr failed to allocate memory for structure
-151 cTempMemErr failed to allocate memory for temporary structures
-150 cMatchErr Color2Index failed to find an index
-127 hMenuFindErr could not find HMenu's parent in MenuKey
-126 mBarNFnd system error code for MBDF not found
-125 updPixMemErr insufficient memory to update a pixmap
-124 volGoneErr Server volume has been disconnected.
-123 wrgVolTypErr Wrong volume type error [operation not supported for MFS]
-122 badMovErr Move into offspring error
-121 tmwdoErr No free WDCB available
-120 dirNFErr Directory not found
-117 memLockedErr trying to move a locked block (MoveHHi)
-116 memSCErr Size Check failed
-115 memBCErr Block Check failed
-114 memPCErr Pointer Check failed
-113 memAZErr Address in zone check failed
-112 memPurErr trying to purge a locked or non-purgeable block
-111 memWZErr WhichZone failed (applied to free block)
-110 memAdrErr address was odd; or out of range
-109 nilHandleErr Master Pointer was NIL in HandleZone or other
-108 memFullErr Not enough room in heap zone
-102 noTypeErr No object of that type in scrap
-100 noScrapErr No scrap exists error
-99 memROZWarn soft error in ROZ
-98 portNotCf driver Open error code (parameter RAM not configured for this connection)
-97 portInUse driver Open error code (port is in use)
-96 portNotPwr serial port not currently powered
-95 excessCollsns excessive collisions on write
-94 lapProtErr error in attaching/detaching protocol
-93 noBridgeErr no network bridge for non-local send
-92 ddpLenErr data length too big
-91 ddpSktErr error in soket number
-90 breakRecd Break received (SCC)
-89 rcvrErr SCC receiver error (framing; parity; OR)
-88 prInitErr InitUtil found the parameter ram uninitialized
-87 prWrErr parameter ram written didn't read-verify
-86 clkWrErr time written did not verify
-85 clkRdErr unable to read same clock value twice
-84 firstDskErr I/O System Errors
-83 fmt2Err can't get enough sync
-82 fmt1Err can't find sector 0 after track format
-81 sectNFErr sector number never found on a track
-80 seekErr track number wrong on address mark
-79 spdAdjErr unable to correctly adjust disk speed
-78 twoSideErr tried to read 2nd side on a 1-sided drive
-77 initIWMErr unable to initialize IWM
-76 tk0BadErr track 0 detect doesn't change
-75 cantStepErr step handshake failed
-74 wrUnderrun write underrun occurred
-73 badDBtSlp bad data mark bit slip nibbles
-72 badDCksum bad data mark checksum
-71 noDtaMkErr couldn't find a data mark header
-70 badBtSlpErr bad addr mark bit slip nibbles
-69 badCksmErr addr mark checksum didn't check
-68 dataVerErr read verify compare failed
-67 noAdrMkErr couldn't find valid addr mark
-66 fontSubErr font substitution occured
-65 fontNotDeclared font not declared
-64 fontDecError error during font declaration
-61 wrPermErr write permissions error
-60 badMDBErr bad master directory block
-59 fsRnErr file system internal error:during rename the old entry was deleted but could not be restored.
-58 extFSErr volume in question belongs to an external fs
-57 noMacDskErr not a mac diskette (sig bytes are wrong)
-56 nsDrvErr no such drive (tried to mount a bad drive num)
-55 volOnLinErr drive volume already on-line at MountVol
-54 permErr permissions error (on file open)
-53 volOffLinErr volume not on line error (was Ejected)
-52 gfpErr get file position error
-51 rfNumErr refnum error
-50 paramErr error in user parameter list
-49 opWrErr file already open with with write permission
-48 dupFNErr duplicate filename (rename)
-47 fBsyErr File is busy (delete)
-46 vLckdErr volume is locked
-45 fLckdErr file is locked
-44 wPrErr diskette is write protected.
-43 fnfErr File not found
-42 tmfoErr too many files open
-41 mFulErr memory full (open) or file won't fit (load)
-40 posErr tried to position to before start of file (r/w)
-39 eofErr End of file
-38 fnOpnErr File not open
-37 bdNamErr there may be no bad names in the final system!
-36 ioErr I/O error (bummers)
-35 nsvErr no such volume
-34 dskFulErr disk full
-33 dirFulErr Directory full
-30 dceExtErr dce extension error
-29 unitTblFullErr unit table has no more entries
-28 notOpenErr Couldn't rd/wr/ctl/sts cause driver not opened
-27 abortErr IO call aborted by KillIO
-26 dInstErr DrvrInstall couldn't find driver in resources
-25 dRemovErr tried to remove an open driver
-24 closErr I/O System Errors
-23 openErr I/O System Errors
-22 unitEmptyErr I/O System Errors
-21 badUnitErr I/O System Errors
-20 writErr I/O System Errors
-19 readErr I/O System Errors
-18 statusErr I/O System Errors
-17 controlErr I/O System Errors
-13 dsExtensionsDisabled say ³Extensions Disabled²
-12 dsHD20Installed say ³HD20 Startup²
-11 dsDisassemblerInstalled say ³Disassembler Installed²
-10 dsMacsBugInstalled say ³MacsBug Installed²
-8 seNoDB no debugger installed to handle debugger command
-5 SlpTypeErr invalid queue element
-4 unimpErr unimplemented core routine
-3 corErr core routine number out of range
-2 vTypErr invalid queue element
-1 qErr queue element not found during deletion
0 tsmComponentNoErr component result = no error
1 EPERM Operation not permitted
2 ENOENT No such file or directory
3 ESRCH No such process
4 EINTR Interrupted system call
5 EIO Input/output error
6 ENXIO Device not configured
7 E2BIG Argument list too long
8 ENOEXEC Exec format error
9 EBADF Bad file descriptor
10 ECHILD No child processes
11 EDEADLK Resource deadlock avoided
12 ENOMEM Cannot allocate memory
13 EACCES Permission denied
14 EFAULT Bad address
15 ENOTBLK Block device required
16 EBUSY Device busy
17 EEXIST File exists
18 EXDEV Cross-device link
19 ENODEV Operation not supported by device
20 ENOTDIR Not a directory
21 EISDIR Is a directory
22 EINVAL Invalid argument
23 ENFILE Too many open files in system
24 EMFILE Too many open files
25 ENOTTY Inappropriate ioctl for device
26 ETXTBSY Text file busy
27 EFBIG File too large
28 ENOSPC No space left on device
29 ESPIPE Illegal seek
30 EROFS Read-only file system
31 EMLINK Too many links
32 EPIPE Broken pipe
33 EDOM Numerical argument out of domain
34 ERANGE Result too large
35 EAGAIN Resource temporarily unavailable
36 EINPROGRESS Operation now in progress
37 EALREADY Operation already in progress
38 ENOTSOCK Socket operation on non-socket
39 EDESTADDRREQ Destination address required
40 EMSGSIZE Message too long
41 EPROTOTYPE Protocol wrong type for socket
42 ENOPROTOOPT Protocol not available
43 EPROTONOSUPPORT Protocol not supported
44 ESOCKTNOSUPPORT Socket type not supported
45 EOPNOTSUPP Operation not supported on socket
46 EPFNOSUPPORT Protocol family not supported
47 EAFNOSUPPORT Address family not supported by protocol family
48 EADDRINUSE Address already in use
49 EADDRNOTAVAIL Can't assign requested address
50 ENETDOWN Network is down
51 ENETUNREACH Network is unreachable
52 ENETRESET Network dropped connection on reset
53 ECONNABORTED Software caused connection abort
54 ECONNRESET Connection reset by peer
55 ENOBUFS No buffer space available
56 EISCONN Socket is already connected
57 ENOTCONN Socket is not connected
58 ESHUTDOWN Can't send after socket shutdown
59 ETOOMANYREFS Too many references: can't splice
60 ETIMEDOUT Connection timed out
61 ECONNREFUSED Connection refused
62 ELOOP Too many levels of symbolic links
63 ENAMETOOLONG File name too long
64 EHOSTDOWN Host is down
65 EHOSTUNREACH No route to host
66 ENOTEMPTY Directory not empty
67 EPROCLIM Too many processes
68 EUSERS Too many users
69 EDQUOT Disc quota exceeded
70 ESTALE Stale NFS file handle
71 EREMOTE Too many levels of remote in path
72 EBADRPC RPC struct is bad
73 ERPCMISMATCH RPC version wrong
74 EPROGUNAVAIL RPC prog. not avail
75 EPROGMISMATCH Program version wrong
76 EPROCUNAVAIL Bad procedure for program
77 ENOLCK No locks available
78 ENOSYS Function not implemented
79 EFTYPE Inappropriate file type or format