remove RPM, since it's unused and unmaintained
diff --git a/Misc/README b/Misc/README
index b239cee..7de627a 100644
--- a/Misc/README
+++ b/Misc/README
@@ -20,7 +20,6 @@
python-wing*.wpr Wing IDE project file
README The file you're reading now
README.valgrind Information for Valgrind users, see valgrind-python.supp
-RPM (Old) tools to build RPMs
SpecialBuilds.txt Describes extra symbols you can set for debug builds
TextMate A TextMate bundle for Python development
valgrind-python.supp Valgrind suppression file, see README.valgrind
diff --git a/Misc/RPM/README b/Misc/RPM/README
deleted file mode 100644
index d883c95..0000000
--- a/Misc/RPM/README
+++ /dev/null
@@ -1,33 +0,0 @@
-This directory contains support file used to build RPM releases of
-Python. Its contents are maintained by Sean Reifschneider
-<jafo@tummy.com>.
-
-If you wish to build RPMs from the base Python release tar-file, note
-that you will have to download the
-"doc/<version>/html-<version>.tar.bz2"
-file from python.org and place it into your "SOURCES" directory for
-the build to complete. This is the same directory that you place the
-Python-2.3.1 release tar-file in. You can then use the ".spec" file in
-this directory to build RPMs.
-
-You may also wish to pursue RPMs provided by distribution makers to see if
-they have one suitable for your uses. If, for example, you just want a
-slightly newer version of Python than what the distro provides, you could
-pick up the closest SRPM your distro provides, and then modify it to
-the newer version, and build that. It may be as simple as just changing
-the "version" information in the spec file (or it may require fixing
-patches).
-
-NOTE: I am *NOT* recommending just using the binary RPM, and never do an
-install with "--force" or "--nodeps".
-
-Also worth pursuing may be newer versions provided by similar distros. For
-example, a Python 3 SRPM from Fedora may be a good baseline to try building
-on CentOS.
-
-Many newer SRPMs won't install on older distros because of format changes.
-You can manually extract these SRPMS with:
-
- mkdir foo
- cd foo
- rpm2cpio <../python3-*.src.rpm | cpio -ivd
diff --git a/Misc/RPM/python-3.2.spec b/Misc/RPM/python-3.2.spec
deleted file mode 100644
index e0f94c5..0000000
--- a/Misc/RPM/python-3.2.spec
+++ /dev/null
@@ -1,390 +0,0 @@
-##########################
-# User-modifiable configs
-##########################
-
-# Is the resulting package and the installed binary named "python" or
-# "python2"?
-#WARNING: Commenting out doesn't work. Last line is what's used.
-%define config_binsuffix none
-%define config_binsuffix 2.6
-
-# Build tkinter? "auto" enables it if /usr/bin/wish exists.
-#WARNING: Commenting out doesn't work. Last line is what's used.
-%define config_tkinter no
-%define config_tkinter yes
-%define config_tkinter auto
-
-# Use pymalloc? The last line (commented or not) determines wether
-# pymalloc is used.
-#WARNING: Commenting out doesn't work. Last line is what's used.
-%define config_pymalloc no
-%define config_pymalloc yes
-
-# Enable IPV6?
-#WARNING: Commenting out doesn't work. Last line is what's used.
-%define config_ipv6 yes
-%define config_ipv6 no
-
-# Build shared libraries or .a library?
-#WARNING: Commenting out doesn't work. Last line is what's used.
-%define config_sharedlib no
-%define config_sharedlib yes
-
-# Location of the HTML directory.
-%define config_htmldir /var/www/html/python
-
-#################################
-# End of user-modifiable configs
-#################################
-
-%define name python
-#--start constants--
-%define version 3.2.6
-%define libvers 3.2
-#--end constants--
-%define release 1pydotorg
-%define __prefix /usr
-
-# kludge to get around rpm <percent>define weirdness
-%define ipv6 %(if [ "%{config_ipv6}" = yes ]; then echo --enable-ipv6; else echo --disable-ipv6; fi)
-%define pymalloc %(if [ "%{config_pymalloc}" = yes ]; then echo --with-pymalloc; else echo --without-pymalloc; fi)
-%define binsuffix %(if [ "%{config_binsuffix}" = none ]; then echo ; else echo "%{config_binsuffix}"; fi)
-%define include_tkinter %(if [ \\( "%{config_tkinter}" = auto -a -f /usr/bin/wish \\) -o "%{config_tkinter}" = yes ]; then echo 1; else echo 0; fi)
-%define libdirname %(( uname -m | egrep -q '_64$' && [ -d /usr/lib64 ] && echo lib64 ) || echo lib)
-%define sharedlib %(if [ "%{config_sharedlib}" = yes ]; then echo --enable-shared; else echo ; fi)
-%define include_sharedlib %(if [ "%{config_sharedlib}" = yes ]; then echo 1; else echo 0; fi)
-
-# detect if documentation is available
-%define include_docs %(if [ -f "%{_sourcedir}/html-%{version}.tar.bz2" ]; then echo 1; else echo 0; fi)
-
-Summary: An interpreted, interactive, object-oriented programming language.
-Name: %{name}%{binsuffix}
-Version: %{version}
-Release: %{release}
-License: PSF
-Group: Development/Languages
-Source: Python-%{version}.tar.bz2
-%if %{include_docs}
-Source1: html-%{version}.tar.bz2
-%endif
-BuildRoot: %{_tmppath}/%{name}-%{version}-root
-BuildPrereq: expat-devel
-BuildPrereq: db4-devel
-BuildPrereq: gdbm-devel
-BuildPrereq: sqlite-devel
-Prefix: %{__prefix}
-Packager: Sean Reifschneider <jafo-rpms@tummy.com>
-
-%description
-Python is an interpreted, interactive, object-oriented programming
-language. It incorporates modules, exceptions, dynamic typing, very high
-level dynamic data types, and classes. Python combines remarkable power
-with very clear syntax. It has interfaces to many system calls and
-libraries, as well as to various window systems, and is extensible in C or
-C++. It is also usable as an extension language for applications that need
-a programmable interface. Finally, Python is portable: it runs on many
-brands of UNIX, on PCs under Windows, MS-DOS, and OS/2, and on the
-Mac.
-
-%package devel
-Summary: The libraries and header files needed for Python extension development.
-Prereq: python%{binsuffix} = %{PACKAGE_VERSION}
-Group: Development/Libraries
-
-%description devel
-The Python programming language's interpreter can be extended with
-dynamically loaded extensions and can be embedded in other programs.
-This package contains the header files and libraries needed to do
-these types of tasks.
-
-Install python-devel if you want to develop Python extensions. The
-python package will also need to be installed. You'll probably also
-want to install the python-docs package, which contains Python
-documentation.
-
-%if %{include_tkinter}
-%package tkinter
-Summary: A graphical user interface for the Python scripting language.
-Group: Development/Languages
-Prereq: python%{binsuffix} = %{PACKAGE_VERSION}-%{release}
-
-%description tkinter
-The Tkinter (Tk interface) program is an graphical user interface for
-the Python scripting language.
-
-You should install the tkinter package if you'd like to use a graphical
-user interface for Python programming.
-%endif
-
-%package tools
-Summary: A collection of development tools included with Python.
-Group: Development/Tools
-Prereq: python%{binsuffix} = %{PACKAGE_VERSION}-%{release}
-
-%description tools
-The Python package includes several development tools that are used
-to build python programs. This package contains a selection of those
-tools, including the IDLE Python IDE.
-
-Install python-tools if you want to use these tools to develop
-Python programs. You will also need to install the python and
-tkinter packages.
-
-%if %{include_docs}
-%package docs
-Summary: Python-related documentation.
-Group: Development/Documentation
-
-%description docs
-Documentation relating to the Python programming language in HTML and info
-formats.
-%endif
-
-%changelog
-* Mon Dec 20 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.4-2pydotorg]
-- Changing the idle wrapper so that it passes arguments to idle.
-
-* Tue Oct 19 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.4b1-1pydotorg]
-- Updating to 2.4.
-
-* Thu Jul 22 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.4-3pydotorg]
-- Paul Tiemann fixes for %{prefix}.
-- Adding permission changes for directory as suggested by reimeika.ca
-- Adding code to detect when it should be using lib64.
-- Adding a define for the location of /var/www/html for docs.
-
-* Thu May 27 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.4-2pydotorg]
-- Including changes from Ian Holsman to build under Red Hat 7.3.
-- Fixing some problems with the /usr/local path change.
-
-* Sat Mar 27 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.2-3pydotorg]
-- Being more agressive about finding the paths to fix for
- #!/usr/local/bin/python.
-
-* Sat Feb 07 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.3-2pydotorg]
-- Adding code to remove "#!/usr/local/bin/python" from particular files and
- causing the RPM build to terminate if there are any unexpected files
- which have that line in them.
-
-* Mon Oct 13 2003 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.2-1pydotorg]
-- Adding code to detect wether documentation is available to build.
-
-* Fri Sep 19 2003 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.1-1pydotorg]
-- Updating to the 2.3.1 release.
-
-* Mon Feb 24 2003 Sean Reifschneider <jafo-rpms@tummy.com> [2.3b1-1pydotorg]
-- Updating to 2.3b1 release.
-
-* Mon Feb 17 2003 Sean Reifschneider <jafo-rpms@tummy.com> [2.3a1-1]
-- Updating to 2.3 release.
-
-* Sun Dec 23 2001 Sean Reifschneider <jafo-rpms@tummy.com>
-[Release 2.2-2]
-- Added -docs package.
-- Added "auto" config_tkinter setting which only enables tk if
- /usr/bin/wish exists.
-
-* Sat Dec 22 2001 Sean Reifschneider <jafo-rpms@tummy.com>
-[Release 2.2-1]
-- Updated to 2.2.
-- Changed the extension to "2" from "2.2".
-
-* Tue Nov 18 2001 Sean Reifschneider <jafo-rpms@tummy.com>
-[Release 2.2c1-1]
-- Updated to 2.2c1.
-
-* Thu Nov 1 2001 Sean Reifschneider <jafo-rpms@tummy.com>
-[Release 2.2b1-3]
-- Changed the way the sed for fixing the #! in pydoc works.
-
-* Wed Oct 24 2001 Sean Reifschneider <jafo-rpms@tummy.com>
-[Release 2.2b1-2]
-- Fixed missing "email" package, thanks to anonymous report on sourceforge.
-- Fixed missing "compiler" package.
-
-* Mon Oct 22 2001 Sean Reifschneider <jafo-rpms@tummy.com>
-[Release 2.2b1-1]
-- Updated to 2.2b1.
-
-* Mon Oct 9 2001 Sean Reifschneider <jafo-rpms@tummy.com>
-[Release 2.2a4-4]
-- otto@balinor.mat.unimi.it mentioned that the license file is missing.
-
-* Sun Sep 30 2001 Sean Reifschneider <jafo-rpms@tummy.com>
-[Release 2.2a4-3]
-- Ignacio Vazquez-Abrams pointed out that I had a spruious double-quote in
- the spec files. Thanks.
-
-* Wed Jul 25 2001 Sean Reifschneider <jafo-rpms@tummy.com>
-[Release 2.2a1-1]
-- Updated to 2.2a1 release.
-- Changed idle and pydoc to use binsuffix macro
-
-#######
-# PREP
-#######
-%prep
-%setup -n Python-%{version}
-
-########
-# BUILD
-########
-%build
-echo "Setting for ipv6: %{ipv6}"
-echo "Setting for pymalloc: %{pymalloc}"
-echo "Setting for binsuffix: %{binsuffix}"
-echo "Setting for include_tkinter: %{include_tkinter}"
-echo "Setting for libdirname: %{libdirname}"
-echo "Setting for sharedlib: %{sharedlib}"
-echo "Setting for include_sharedlib: %{include_sharedlib}"
-./configure --enable-unicode=ucs4 %{sharedlib} %{ipv6} %{pymalloc} --prefix=%{__prefix}
-make
-
-##########
-# INSTALL
-##########
-%install
-# set the install path
-echo '[install_scripts]' >setup.cfg
-echo 'install_dir='"${RPM_BUILD_ROOT}%{__prefix}/bin" >>setup.cfg
-
-[ -d "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT%{__prefix}/%{libdirname}/python%{libvers}/lib-dynload
-make prefix=$RPM_BUILD_ROOT%{__prefix} install
-
-# REPLACE PATH IN PYDOC
-if [ ! -z "%{binsuffix}" ]
-then
- (
- cd $RPM_BUILD_ROOT%{__prefix}/bin
- mv pydoc pydoc.old
- sed 's|#!.*|#!%{__prefix}/bin/env python'%{binsuffix}'|' \
- pydoc.old >pydoc
- chmod 755 pydoc
- rm -f pydoc.old
- )
-fi
-
-# add the binsuffix
-if [ ! -z "%{binsuffix}" ]
-then
- rm -f $RPM_BUILD_ROOT%{__prefix}/bin/python[0-9a-zA-Z]*
- ( cd $RPM_BUILD_ROOT%{__prefix}/bin;
- for file in *; do mv "$file" "$file"%{binsuffix}; done )
- ( cd $RPM_BUILD_ROOT%{_mandir}/man1; mv python.1 python%{binsuffix}.1 )
-fi
-
-########
-# Tools
-echo '#!%{__prefix}/bin/env python%{binsuffix}' >${RPM_BUILD_ROOT}%{__prefix}/bin/idle%{binsuffix}
-echo 'import os, sys' >>${RPM_BUILD_ROOT}%{__prefix}/bin/idle%{binsuffix}
-echo 'os.execvp("%{__prefix}/bin/python%{binsuffix}", ["%{__prefix}/bin/python%{binsuffix}", "%{__prefix}/lib/python%{libvers}/idlelib/idle.py"] + sys.argv[1:])' >>${RPM_BUILD_ROOT}%{__prefix}/bin/idle%{binsuffix}
-echo 'print "Failed to exec Idle"' >>${RPM_BUILD_ROOT}%{__prefix}/bin/idle%{binsuffix}
-echo 'sys.exit(1)' >>${RPM_BUILD_ROOT}%{__prefix}/bin/idle%{binsuffix}
-chmod 755 $RPM_BUILD_ROOT%{__prefix}/bin/idle%{binsuffix}
-cp -a Tools $RPM_BUILD_ROOT%{__prefix}/%{libdirname}/python%{libvers}
-
-# MAKE FILE LISTS
-rm -f mainpkg.files
-find "$RPM_BUILD_ROOT""%{__prefix}"/%{libdirname}/python%{libvers} -type f |
- sed "s|^${RPM_BUILD_ROOT}|/|" |
- grep -v -e '/python%{libvers}/config$' -e '_tkinter.so$' >mainpkg.files
-find "$RPM_BUILD_ROOT""%{__prefix}"/bin -type f -o -type l |
- sed "s|^${RPM_BUILD_ROOT}|/|" |
- grep -v -e '/bin/2to3%{binsuffix}$' |
- grep -v -e '/bin/pydoc%{binsuffix}$' |
- grep -v -e '/bin/smtpd.py%{binsuffix}$' |
- grep -v -e '/bin/idle%{binsuffix}$' >>mainpkg.files
-
-rm -f tools.files
-find "$RPM_BUILD_ROOT""%{__prefix}"/%{libdirname}/python%{libvers}/idlelib \
- "$RPM_BUILD_ROOT""%{__prefix}"/%{libdirname}/python%{libvers}/Tools -type f |
- sed "s|^${RPM_BUILD_ROOT}|/|" >tools.files
-echo "%{__prefix}"/bin/2to3%{binsuffix} >>tools.files
-echo "%{__prefix}"/bin/pydoc%{binsuffix} >>tools.files
-echo "%{__prefix}"/bin/smtpd.py%{binsuffix} >>tools.files
-echo "%{__prefix}"/bin/idle%{binsuffix} >>tools.files
-
-######
-# Docs
-%if %{include_docs}
-mkdir -p "$RPM_BUILD_ROOT"%{config_htmldir}
-(
- cd "$RPM_BUILD_ROOT"%{config_htmldir}
- bunzip2 < %{SOURCE1} | tar x
-)
-%endif
-
-# fix the #! line in installed files
-find "$RPM_BUILD_ROOT" -type f -print0 |
- xargs -0 grep -l /usr/local/bin/python | while read file
-do
- FIXFILE="$file"
- sed 's|^#!.*python|#!%{__prefix}/bin/env python'"%{binsuffix}"'|' \
- "$FIXFILE" >/tmp/fix-python-path.$$
- cat /tmp/fix-python-path.$$ >"$FIXFILE"
- rm -f /tmp/fix-python-path.$$
-done
-
-# check to see if there are any straggling #! lines
-find "$RPM_BUILD_ROOT" -type f | xargs egrep -n '^#! */usr/local/bin/python' \
- | grep ':1:#!' >/tmp/python-rpm-files.$$ || true
-if [ -s /tmp/python-rpm-files.$$ ]
-then
- echo '*****************************************************'
- cat /tmp/python-rpm-files.$$
- cat <<@EOF
- *****************************************************
- There are still files referencing /usr/local/bin/python in the
- install directory. They are listed above. Please fix the .spec
- file and try again. If you are an end-user, you probably want
- to report this to jafo-rpms@tummy.com as well.
- *****************************************************
-@EOF
- rm -f /tmp/python-rpm-files.$$
- exit 1
-fi
-rm -f /tmp/python-rpm-files.$$
-
-########
-# CLEAN
-########
-%clean
-[ -n "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != / ] && rm -rf $RPM_BUILD_ROOT
-rm -f mainpkg.files tools.files
-
-########
-# FILES
-########
-%files -f mainpkg.files
-%defattr(-,root,root)
-%doc Misc/README Misc/cheatsheet Misc/Porting
-%doc LICENSE Misc/ACKS Misc/HISTORY Misc/NEWS
-%{_mandir}/man1/python%{binsuffix}.1*
-
-%attr(755,root,root) %dir %{__prefix}/include/python%{libvers}
-%attr(755,root,root) %dir %{__prefix}/%{libdirname}/python%{libvers}/
-%if %{include_sharedlib}
-%{__prefix}/%{libdirname}/libpython*
-%endif
-
-%files devel
-%defattr(-,root,root)
-%{__prefix}/include/python%{libvers}/*.h
-%{__prefix}/%{libdirname}/python%{libvers}/config
-
-%files -f tools.files tools
-%defattr(-,root,root)
-
-%if %{include_tkinter}
-%files tkinter
-%defattr(-,root,root)
-%{__prefix}/%{libdirname}/python%{libvers}/tkinter
-%{__prefix}/%{libdirname}/python%{libvers}/lib-dynload/_tkinter.so*
-%endif
-
-%if %{include_docs}
-%files docs
-%defattr(-,root,root)
-%{config_htmldir}/*
-%endif