|  | 
 | /* Write Python objects to files and read them back. | 
 |    This is primarily intended for writing and reading compiled Python code, | 
 |    even though dicts, lists, sets and frozensets, not commonly seen in | 
 |    code objects, are supported. | 
 |    Version 3 of this protocol properly supports circular links | 
 |    and sharing. */ | 
 |  | 
 | #define PY_SSIZE_T_CLEAN | 
 |  | 
 | #include "Python.h" | 
 | #include "longintrepr.h" | 
 | #include "code.h" | 
 | #include "marshal.h" | 
 | #include "../Modules/hashtable.h" | 
 |  | 
 | /* High water mark to determine when the marshalled object is dangerously deep | 
 |  * and risks coring the interpreter.  When the object stack gets this deep, | 
 |  * raise an exception instead of continuing. | 
 |  * On Windows debug builds, reduce this value. | 
 |  */ | 
 | #if defined(MS_WINDOWS) && defined(_DEBUG) | 
 | #define MAX_MARSHAL_STACK_DEPTH 1000 | 
 | #else | 
 | #define MAX_MARSHAL_STACK_DEPTH 2000 | 
 | #endif | 
 |  | 
 | #define TYPE_NULL               '0' | 
 | #define TYPE_NONE               'N' | 
 | #define TYPE_FALSE              'F' | 
 | #define TYPE_TRUE               'T' | 
 | #define TYPE_STOPITER           'S' | 
 | #define TYPE_ELLIPSIS           '.' | 
 | #define TYPE_INT                'i' | 
 | #define TYPE_FLOAT              'f' | 
 | #define TYPE_BINARY_FLOAT       'g' | 
 | #define TYPE_COMPLEX            'x' | 
 | #define TYPE_BINARY_COMPLEX     'y' | 
 | #define TYPE_LONG               'l' | 
 | #define TYPE_STRING             's' | 
 | #define TYPE_INTERNED           't' | 
 | #define TYPE_REF                'r' | 
 | #define TYPE_TUPLE              '(' | 
 | #define TYPE_LIST               '[' | 
 | #define TYPE_DICT               '{' | 
 | #define TYPE_CODE               'c' | 
 | #define TYPE_UNICODE            'u' | 
 | #define TYPE_UNKNOWN            '?' | 
 | #define TYPE_SET                '<' | 
 | #define TYPE_FROZENSET          '>' | 
 | #define FLAG_REF                '\x80' /* with a type, add obj to index */ | 
 |  | 
 | #define TYPE_ASCII              'a' | 
 | #define TYPE_ASCII_INTERNED     'A' | 
 | #define TYPE_SMALL_TUPLE        ')' | 
 | #define TYPE_SHORT_ASCII        'z' | 
 | #define TYPE_SHORT_ASCII_INTERNED 'Z' | 
 |  | 
 | #define WFERR_OK 0 | 
 | #define WFERR_UNMARSHALLABLE 1 | 
 | #define WFERR_NESTEDTOODEEP 2 | 
 | #define WFERR_NOMEMORY 3 | 
 |  | 
 | typedef struct { | 
 |     FILE *fp; | 
 |     int error;  /* see WFERR_* values */ | 
 |     int depth; | 
 |     PyObject *str; | 
 |     char *ptr; | 
 |     char *end; | 
 |     char *buf; | 
 |     _Py_hashtable_t *hashtable; | 
 |     int version; | 
 | } WFILE; | 
 |  | 
 | #define w_byte(c, p) do {                               \ | 
 |         if ((p)->ptr != (p)->end || w_reserve((p), 1))  \ | 
 |             *(p)->ptr++ = (c);                          \ | 
 |     } while(0) | 
 |  | 
 | static void | 
 | w_flush(WFILE *p) | 
 | { | 
 |     assert(p->fp != NULL); | 
 |     fwrite(p->buf, 1, p->ptr - p->buf, p->fp); | 
 |     p->ptr = p->buf; | 
 | } | 
 |  | 
 | static int | 
 | w_reserve(WFILE *p, Py_ssize_t needed) | 
 | { | 
 |     Py_ssize_t pos, size, delta; | 
 |     if (p->ptr == NULL) | 
 |         return 0; /* An error already occurred */ | 
 |     if (p->fp != NULL) { | 
 |         w_flush(p); | 
 |         return needed <= p->end - p->ptr; | 
 |     } | 
 |     assert(p->str != NULL); | 
 |     pos = p->ptr - p->buf; | 
 |     size = PyBytes_Size(p->str); | 
 |     if (size > 16*1024*1024) | 
 |         delta = (size >> 3);            /* 12.5% overallocation */ | 
 |     else | 
 |         delta = size + 1024; | 
 |     delta = Py_MAX(delta, needed); | 
 |     if (delta > PY_SSIZE_T_MAX - size) { | 
 |         p->error = WFERR_NOMEMORY; | 
 |         return 0; | 
 |     } | 
 |     size += delta; | 
 |     if (_PyBytes_Resize(&p->str, size) != 0) { | 
 |         p->ptr = p->buf = p->end = NULL; | 
 |         return 0; | 
 |     } | 
 |     else { | 
 |         p->buf = PyBytes_AS_STRING(p->str); | 
 |         p->ptr = p->buf + pos; | 
 |         p->end = p->buf + size; | 
 |         return 1; | 
 |     } | 
 | } | 
 |  | 
 | static void | 
 | w_string(const char *s, Py_ssize_t n, WFILE *p) | 
 | { | 
 |     Py_ssize_t m; | 
 |     if (!n || p->ptr == NULL) | 
 |         return; | 
 |     m = p->end - p->ptr; | 
 |     if (p->fp != NULL) { | 
 |         if (n <= m) { | 
 |             Py_MEMCPY(p->ptr, s, n); | 
 |             p->ptr += n; | 
 |         } | 
 |         else { | 
 |             w_flush(p); | 
 |             fwrite(s, 1, n, p->fp); | 
 |         } | 
 |     } | 
 |     else { | 
 |         if (n <= m || w_reserve(p, n - m)) { | 
 |             Py_MEMCPY(p->ptr, s, n); | 
 |             p->ptr += n; | 
 |         } | 
 |     } | 
 | } | 
 |  | 
 | static void | 
 | w_short(int x, WFILE *p) | 
 | { | 
 |     w_byte((char)( x      & 0xff), p); | 
 |     w_byte((char)((x>> 8) & 0xff), p); | 
 | } | 
 |  | 
 | static void | 
 | w_long(long x, WFILE *p) | 
 | { | 
 |     w_byte((char)( x      & 0xff), p); | 
 |     w_byte((char)((x>> 8) & 0xff), p); | 
 |     w_byte((char)((x>>16) & 0xff), p); | 
 |     w_byte((char)((x>>24) & 0xff), p); | 
 | } | 
 |  | 
 | #define SIZE32_MAX  0x7FFFFFFF | 
 |  | 
 | #if SIZEOF_SIZE_T > 4 | 
 | # define W_SIZE(n, p)  do {                     \ | 
 |         if ((n) > SIZE32_MAX) {                 \ | 
 |             (p)->depth--;                       \ | 
 |             (p)->error = WFERR_UNMARSHALLABLE;  \ | 
 |             return;                             \ | 
 |         }                                       \ | 
 |         w_long((long)(n), p);                   \ | 
 |     } while(0) | 
 | #else | 
 | # define W_SIZE  w_long | 
 | #endif | 
 |  | 
 | static void | 
 | w_pstring(const char *s, Py_ssize_t n, WFILE *p) | 
 | { | 
 |         W_SIZE(n, p); | 
 |         w_string(s, n, p); | 
 | } | 
 |  | 
 | static void | 
 | w_short_pstring(const char *s, Py_ssize_t n, WFILE *p) | 
 | { | 
 |     w_byte(Py_SAFE_DOWNCAST(n, Py_ssize_t, unsigned char), p); | 
 |     w_string(s, n, p); | 
 | } | 
 |  | 
 | /* We assume that Python ints are stored internally in base some power of | 
 |    2**15; for the sake of portability we'll always read and write them in base | 
 |    exactly 2**15. */ | 
 |  | 
 | #define PyLong_MARSHAL_SHIFT 15 | 
 | #define PyLong_MARSHAL_BASE ((short)1 << PyLong_MARSHAL_SHIFT) | 
 | #define PyLong_MARSHAL_MASK (PyLong_MARSHAL_BASE - 1) | 
 | #if PyLong_SHIFT % PyLong_MARSHAL_SHIFT != 0 | 
 | #error "PyLong_SHIFT must be a multiple of PyLong_MARSHAL_SHIFT" | 
 | #endif | 
 | #define PyLong_MARSHAL_RATIO (PyLong_SHIFT / PyLong_MARSHAL_SHIFT) | 
 |  | 
 | #define W_TYPE(t, p) do { \ | 
 |     w_byte((t) | flag, (p)); \ | 
 | } while(0) | 
 |  | 
 | static void | 
 | w_PyLong(const PyLongObject *ob, char flag, WFILE *p) | 
 | { | 
 |     Py_ssize_t i, j, n, l; | 
 |     digit d; | 
 |  | 
 |     W_TYPE(TYPE_LONG, p); | 
 |     if (Py_SIZE(ob) == 0) { | 
 |         w_long((long)0, p); | 
 |         return; | 
 |     } | 
 |  | 
 |     /* set l to number of base PyLong_MARSHAL_BASE digits */ | 
 |     n = Py_ABS(Py_SIZE(ob)); | 
 |     l = (n-1) * PyLong_MARSHAL_RATIO; | 
 |     d = ob->ob_digit[n-1]; | 
 |     assert(d != 0); /* a PyLong is always normalized */ | 
 |     do { | 
 |         d >>= PyLong_MARSHAL_SHIFT; | 
 |         l++; | 
 |     } while (d != 0); | 
 |     if (l > SIZE32_MAX) { | 
 |         p->depth--; | 
 |         p->error = WFERR_UNMARSHALLABLE; | 
 |         return; | 
 |     } | 
 |     w_long((long)(Py_SIZE(ob) > 0 ? l : -l), p); | 
 |  | 
 |     for (i=0; i < n-1; i++) { | 
 |         d = ob->ob_digit[i]; | 
 |         for (j=0; j < PyLong_MARSHAL_RATIO; j++) { | 
 |             w_short(d & PyLong_MARSHAL_MASK, p); | 
 |             d >>= PyLong_MARSHAL_SHIFT; | 
 |         } | 
 |         assert (d == 0); | 
 |     } | 
 |     d = ob->ob_digit[n-1]; | 
 |     do { | 
 |         w_short(d & PyLong_MARSHAL_MASK, p); | 
 |         d >>= PyLong_MARSHAL_SHIFT; | 
 |     } while (d != 0); | 
 | } | 
 |  | 
 | static int | 
 | w_ref(PyObject *v, char *flag, WFILE *p) | 
 | { | 
 |     _Py_hashtable_entry_t *entry; | 
 |     int w; | 
 |  | 
 |     if (p->version < 3 || p->hashtable == NULL) | 
 |         return 0; /* not writing object references */ | 
 |  | 
 |     /* if it has only one reference, it definitely isn't shared */ | 
 |     if (Py_REFCNT(v) == 1) | 
 |         return 0; | 
 |  | 
 |     entry = _Py_hashtable_get_entry(p->hashtable, v); | 
 |     if (entry != NULL) { | 
 |         /* write the reference index to the stream */ | 
 |         _Py_HASHTABLE_ENTRY_READ_DATA(p->hashtable, &w, sizeof(w), entry); | 
 |         /* we don't store "long" indices in the dict */ | 
 |         assert(0 <= w && w <= 0x7fffffff); | 
 |         w_byte(TYPE_REF, p); | 
 |         w_long(w, p); | 
 |         return 1; | 
 |     } else { | 
 |         size_t s = p->hashtable->entries; | 
 |         /* we don't support long indices */ | 
 |         if (s >= 0x7fffffff) { | 
 |             PyErr_SetString(PyExc_ValueError, "too many objects"); | 
 |             goto err; | 
 |         } | 
 |         w = (int)s; | 
 |         Py_INCREF(v); | 
 |         if (_Py_HASHTABLE_SET(p->hashtable, v, w) < 0) { | 
 |             Py_DECREF(v); | 
 |             goto err; | 
 |         } | 
 |         *flag |= FLAG_REF; | 
 |         return 0; | 
 |     } | 
 | err: | 
 |     p->error = WFERR_UNMARSHALLABLE; | 
 |     return 1; | 
 | } | 
 |  | 
 | static void | 
 | w_complex_object(PyObject *v, char flag, WFILE *p); | 
 |  | 
 | static void | 
 | w_object(PyObject *v, WFILE *p) | 
 | { | 
 |     char flag = '\0'; | 
 |  | 
 |     p->depth++; | 
 |  | 
 |     if (p->depth > MAX_MARSHAL_STACK_DEPTH) { | 
 |         p->error = WFERR_NESTEDTOODEEP; | 
 |     } | 
 |     else if (v == NULL) { | 
 |         w_byte(TYPE_NULL, p); | 
 |     } | 
 |     else if (v == Py_None) { | 
 |         w_byte(TYPE_NONE, p); | 
 |     } | 
 |     else if (v == PyExc_StopIteration) { | 
 |         w_byte(TYPE_STOPITER, p); | 
 |     } | 
 |     else if (v == Py_Ellipsis) { | 
 |         w_byte(TYPE_ELLIPSIS, p); | 
 |     } | 
 |     else if (v == Py_False) { | 
 |         w_byte(TYPE_FALSE, p); | 
 |     } | 
 |     else if (v == Py_True) { | 
 |         w_byte(TYPE_TRUE, p); | 
 |     } | 
 |     else if (!w_ref(v, &flag, p)) | 
 |         w_complex_object(v, flag, p); | 
 |  | 
 |     p->depth--; | 
 | } | 
 |  | 
 | static void | 
 | w_complex_object(PyObject *v, char flag, WFILE *p) | 
 | { | 
 |     Py_ssize_t i, n; | 
 |  | 
 |     if (PyLong_CheckExact(v)) { | 
 |         long x = PyLong_AsLong(v); | 
 |         if ((x == -1)  && PyErr_Occurred()) { | 
 |             PyLongObject *ob = (PyLongObject *)v; | 
 |             PyErr_Clear(); | 
 |             w_PyLong(ob, flag, p); | 
 |         } | 
 |         else { | 
 | #if SIZEOF_LONG > 4 | 
 |             long y = Py_ARITHMETIC_RIGHT_SHIFT(long, x, 31); | 
 |             if (y && y != -1) { | 
 |                 /* Too large for TYPE_INT */ | 
 |                 w_PyLong((PyLongObject*)v, flag, p); | 
 |             } | 
 |             else | 
 | #endif | 
 |             { | 
 |                 W_TYPE(TYPE_INT, p); | 
 |                 w_long(x, p); | 
 |             } | 
 |         } | 
 |     } | 
 |     else if (PyFloat_CheckExact(v)) { | 
 |         if (p->version > 1) { | 
 |             unsigned char buf[8]; | 
 |             if (_PyFloat_Pack8(PyFloat_AsDouble(v), | 
 |                                buf, 1) < 0) { | 
 |                 p->error = WFERR_UNMARSHALLABLE; | 
 |                 return; | 
 |             } | 
 |             W_TYPE(TYPE_BINARY_FLOAT, p); | 
 |             w_string((char*)buf, 8, p); | 
 |         } | 
 |         else { | 
 |             char *buf = PyOS_double_to_string(PyFloat_AS_DOUBLE(v), | 
 |                                               'g', 17, 0, NULL); | 
 |             if (!buf) { | 
 |                 p->error = WFERR_NOMEMORY; | 
 |                 return; | 
 |             } | 
 |             n = strlen(buf); | 
 |             W_TYPE(TYPE_FLOAT, p); | 
 |             w_byte((int)n, p); | 
 |             w_string(buf, n, p); | 
 |             PyMem_Free(buf); | 
 |         } | 
 |     } | 
 |     else if (PyComplex_CheckExact(v)) { | 
 |         if (p->version > 1) { | 
 |             unsigned char buf[8]; | 
 |             if (_PyFloat_Pack8(PyComplex_RealAsDouble(v), | 
 |                                buf, 1) < 0) { | 
 |                 p->error = WFERR_UNMARSHALLABLE; | 
 |                 return; | 
 |             } | 
 |             W_TYPE(TYPE_BINARY_COMPLEX, p); | 
 |             w_string((char*)buf, 8, p); | 
 |             if (_PyFloat_Pack8(PyComplex_ImagAsDouble(v), | 
 |                                buf, 1) < 0) { | 
 |                 p->error = WFERR_UNMARSHALLABLE; | 
 |                 return; | 
 |             } | 
 |             w_string((char*)buf, 8, p); | 
 |         } | 
 |         else { | 
 |             char *buf; | 
 |             W_TYPE(TYPE_COMPLEX, p); | 
 |             buf = PyOS_double_to_string(PyComplex_RealAsDouble(v), | 
 |                                         'g', 17, 0, NULL); | 
 |             if (!buf) { | 
 |                 p->error = WFERR_NOMEMORY; | 
 |                 return; | 
 |             } | 
 |             n = strlen(buf); | 
 |             w_byte((int)n, p); | 
 |             w_string(buf, n, p); | 
 |             PyMem_Free(buf); | 
 |             buf = PyOS_double_to_string(PyComplex_ImagAsDouble(v), | 
 |                                         'g', 17, 0, NULL); | 
 |             if (!buf) { | 
 |                 p->error = WFERR_NOMEMORY; | 
 |                 return; | 
 |             } | 
 |             n = strlen(buf); | 
 |             w_byte((int)n, p); | 
 |             w_string(buf, n, p); | 
 |             PyMem_Free(buf); | 
 |         } | 
 |     } | 
 |     else if (PyBytes_CheckExact(v)) { | 
 |         W_TYPE(TYPE_STRING, p); | 
 |         w_pstring(PyBytes_AS_STRING(v), PyBytes_GET_SIZE(v), p); | 
 |     } | 
 |     else if (PyUnicode_CheckExact(v)) { | 
 |         if (p->version >= 4 && PyUnicode_IS_ASCII(v)) { | 
 |             int is_short = PyUnicode_GET_LENGTH(v) < 256; | 
 |             if (is_short) { | 
 |                 if (PyUnicode_CHECK_INTERNED(v)) | 
 |                     W_TYPE(TYPE_SHORT_ASCII_INTERNED, p); | 
 |                 else | 
 |                     W_TYPE(TYPE_SHORT_ASCII, p); | 
 |                 w_short_pstring((char *) PyUnicode_1BYTE_DATA(v), | 
 |                                 PyUnicode_GET_LENGTH(v), p); | 
 |             } | 
 |             else { | 
 |                 if (PyUnicode_CHECK_INTERNED(v)) | 
 |                     W_TYPE(TYPE_ASCII_INTERNED, p); | 
 |                 else | 
 |                     W_TYPE(TYPE_ASCII, p); | 
 |                 w_pstring((char *) PyUnicode_1BYTE_DATA(v), | 
 |                           PyUnicode_GET_LENGTH(v), p); | 
 |             } | 
 |         } | 
 |         else { | 
 |             PyObject *utf8; | 
 |             utf8 = PyUnicode_AsEncodedString(v, "utf8", "surrogatepass"); | 
 |             if (utf8 == NULL) { | 
 |                 p->depth--; | 
 |                 p->error = WFERR_UNMARSHALLABLE; | 
 |                 return; | 
 |             } | 
 |             if (p->version >= 3 &&  PyUnicode_CHECK_INTERNED(v)) | 
 |                 W_TYPE(TYPE_INTERNED, p); | 
 |             else | 
 |                 W_TYPE(TYPE_UNICODE, p); | 
 |             w_pstring(PyBytes_AS_STRING(utf8), PyBytes_GET_SIZE(utf8), p); | 
 |             Py_DECREF(utf8); | 
 |         } | 
 |     } | 
 |     else if (PyTuple_CheckExact(v)) { | 
 |         n = PyTuple_Size(v); | 
 |         if (p->version >= 4 && n < 256) { | 
 |             W_TYPE(TYPE_SMALL_TUPLE, p); | 
 |             w_byte((unsigned char)n, p); | 
 |         } | 
 |         else { | 
 |             W_TYPE(TYPE_TUPLE, p); | 
 |             W_SIZE(n, p); | 
 |         } | 
 |         for (i = 0; i < n; i++) { | 
 |             w_object(PyTuple_GET_ITEM(v, i), p); | 
 |         } | 
 |     } | 
 |     else if (PyList_CheckExact(v)) { | 
 |         W_TYPE(TYPE_LIST, p); | 
 |         n = PyList_GET_SIZE(v); | 
 |         W_SIZE(n, p); | 
 |         for (i = 0; i < n; i++) { | 
 |             w_object(PyList_GET_ITEM(v, i), p); | 
 |         } | 
 |     } | 
 |     else if (PyDict_CheckExact(v)) { | 
 |         Py_ssize_t pos; | 
 |         PyObject *key, *value; | 
 |         W_TYPE(TYPE_DICT, p); | 
 |         /* This one is NULL object terminated! */ | 
 |         pos = 0; | 
 |         while (PyDict_Next(v, &pos, &key, &value)) { | 
 |             w_object(key, p); | 
 |             w_object(value, p); | 
 |         } | 
 |         w_object((PyObject *)NULL, p); | 
 |     } | 
 |     else if (PyAnySet_CheckExact(v)) { | 
 |         PyObject *value, *it; | 
 |  | 
 |         if (PyObject_TypeCheck(v, &PySet_Type)) | 
 |             W_TYPE(TYPE_SET, p); | 
 |         else | 
 |             W_TYPE(TYPE_FROZENSET, p); | 
 |         n = PyObject_Size(v); | 
 |         if (n == -1) { | 
 |             p->depth--; | 
 |             p->error = WFERR_UNMARSHALLABLE; | 
 |             return; | 
 |         } | 
 |         W_SIZE(n, p); | 
 |         it = PyObject_GetIter(v); | 
 |         if (it == NULL) { | 
 |             p->depth--; | 
 |             p->error = WFERR_UNMARSHALLABLE; | 
 |             return; | 
 |         } | 
 |         while ((value = PyIter_Next(it)) != NULL) { | 
 |             w_object(value, p); | 
 |             Py_DECREF(value); | 
 |         } | 
 |         Py_DECREF(it); | 
 |         if (PyErr_Occurred()) { | 
 |             p->depth--; | 
 |             p->error = WFERR_UNMARSHALLABLE; | 
 |             return; | 
 |         } | 
 |     } | 
 |     else if (PyCode_Check(v)) { | 
 |         PyCodeObject *co = (PyCodeObject *)v; | 
 |         W_TYPE(TYPE_CODE, p); | 
 |         w_long(co->co_argcount, p); | 
 |         w_long(co->co_kwonlyargcount, p); | 
 |         w_long(co->co_nlocals, p); | 
 |         w_long(co->co_stacksize, p); | 
 |         w_long(co->co_flags, p); | 
 |         w_object(co->co_code, p); | 
 |         w_object(co->co_consts, p); | 
 |         w_object(co->co_names, p); | 
 |         w_object(co->co_varnames, p); | 
 |         w_object(co->co_freevars, p); | 
 |         w_object(co->co_cellvars, p); | 
 |         w_object(co->co_filename, p); | 
 |         w_object(co->co_name, p); | 
 |         w_long(co->co_firstlineno, p); | 
 |         w_object(co->co_lnotab, p); | 
 |     } | 
 |     else if (PyObject_CheckBuffer(v)) { | 
 |         /* Write unknown bytes-like objects as a byte string */ | 
 |         Py_buffer view; | 
 |         if (PyObject_GetBuffer(v, &view, PyBUF_SIMPLE) != 0) { | 
 |             w_byte(TYPE_UNKNOWN, p); | 
 |             p->depth--; | 
 |             p->error = WFERR_UNMARSHALLABLE; | 
 |             return; | 
 |         } | 
 |         W_TYPE(TYPE_STRING, p); | 
 |         w_pstring(view.buf, view.len, p); | 
 |         PyBuffer_Release(&view); | 
 |     } | 
 |     else { | 
 |         W_TYPE(TYPE_UNKNOWN, p); | 
 |         p->error = WFERR_UNMARSHALLABLE; | 
 |     } | 
 | } | 
 |  | 
 | static int | 
 | w_init_refs(WFILE *wf, int version) | 
 | { | 
 |     if (version >= 3) { | 
 |         wf->hashtable = _Py_hashtable_new(sizeof(int), _Py_hashtable_hash_ptr, | 
 |                                           _Py_hashtable_compare_direct); | 
 |         if (wf->hashtable == NULL) { | 
 |             PyErr_NoMemory(); | 
 |             return -1; | 
 |         } | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | w_decref_entry(_Py_hashtable_entry_t *entry, void *Py_UNUSED(data)) | 
 | { | 
 |     Py_XDECREF(entry->key); | 
 |     return 0; | 
 | } | 
 |  | 
 | static void | 
 | w_clear_refs(WFILE *wf) | 
 | { | 
 |     if (wf->hashtable != NULL) { | 
 |         _Py_hashtable_foreach(wf->hashtable, w_decref_entry, NULL); | 
 |         _Py_hashtable_destroy(wf->hashtable); | 
 |     } | 
 | } | 
 |  | 
 | /* version currently has no effect for writing ints. */ | 
 | void | 
 | PyMarshal_WriteLongToFile(long x, FILE *fp, int version) | 
 | { | 
 |     char buf[4]; | 
 |     WFILE wf; | 
 |     memset(&wf, 0, sizeof(wf)); | 
 |     wf.fp = fp; | 
 |     wf.ptr = wf.buf = buf; | 
 |     wf.end = wf.ptr + sizeof(buf); | 
 |     wf.error = WFERR_OK; | 
 |     wf.version = version; | 
 |     w_long(x, &wf); | 
 |     w_flush(&wf); | 
 | } | 
 |  | 
 | void | 
 | PyMarshal_WriteObjectToFile(PyObject *x, FILE *fp, int version) | 
 | { | 
 |     char buf[BUFSIZ]; | 
 |     WFILE wf; | 
 |     memset(&wf, 0, sizeof(wf)); | 
 |     wf.fp = fp; | 
 |     wf.ptr = wf.buf = buf; | 
 |     wf.end = wf.ptr + sizeof(buf); | 
 |     wf.error = WFERR_OK; | 
 |     wf.version = version; | 
 |     if (w_init_refs(&wf, version)) | 
 |         return; /* caller mush check PyErr_Occurred() */ | 
 |     w_object(x, &wf); | 
 |     w_clear_refs(&wf); | 
 |     w_flush(&wf); | 
 | } | 
 |  | 
 | typedef struct { | 
 |     FILE *fp; | 
 |     int depth; | 
 |     PyObject *readable;  /* Stream-like object being read from */ | 
 |     PyObject *current_filename; | 
 |     char *ptr; | 
 |     char *end; | 
 |     char *buf; | 
 |     Py_ssize_t buf_size; | 
 |     PyObject *refs;  /* a list */ | 
 | } RFILE; | 
 |  | 
 | static char * | 
 | r_string(Py_ssize_t n, RFILE *p) | 
 | { | 
 |     Py_ssize_t read = -1; | 
 |  | 
 |     if (p->ptr != NULL) { | 
 |         /* Fast path for loads() */ | 
 |         char *res = p->ptr; | 
 |         Py_ssize_t left = p->end - p->ptr; | 
 |         if (left < n) { | 
 |             PyErr_SetString(PyExc_EOFError, | 
 |                             "marshal data too short"); | 
 |             return NULL; | 
 |         } | 
 |         p->ptr += n; | 
 |         return res; | 
 |     } | 
 |     if (p->buf == NULL) { | 
 |         p->buf = PyMem_MALLOC(n); | 
 |         if (p->buf == NULL) { | 
 |             PyErr_NoMemory(); | 
 |             return NULL; | 
 |         } | 
 |         p->buf_size = n; | 
 |     } | 
 |     else if (p->buf_size < n) { | 
 |         p->buf = PyMem_REALLOC(p->buf, n); | 
 |         if (p->buf == NULL) { | 
 |             PyErr_NoMemory(); | 
 |             return NULL; | 
 |         } | 
 |         p->buf_size = n; | 
 |     } | 
 |  | 
 |     if (!p->readable) { | 
 |         assert(p->fp != NULL); | 
 |         read = fread(p->buf, 1, n, p->fp); | 
 |     } | 
 |     else { | 
 |         _Py_IDENTIFIER(readinto); | 
 |         PyObject *res, *mview; | 
 |         Py_buffer buf; | 
 |  | 
 |         if (PyBuffer_FillInfo(&buf, NULL, p->buf, n, 0, PyBUF_CONTIG) == -1) | 
 |             return NULL; | 
 |         mview = PyMemoryView_FromBuffer(&buf); | 
 |         if (mview == NULL) | 
 |             return NULL; | 
 |  | 
 |         res = _PyObject_CallMethodId(p->readable, &PyId_readinto, "N", mview); | 
 |         if (res != NULL) { | 
 |             read = PyNumber_AsSsize_t(res, PyExc_ValueError); | 
 |             Py_DECREF(res); | 
 |         } | 
 |     } | 
 |     if (read != n) { | 
 |         if (!PyErr_Occurred()) { | 
 |             if (read > n) | 
 |                 PyErr_Format(PyExc_ValueError, | 
 |                              "read() returned too much data: " | 
 |                              "%zd bytes requested, %zd returned", | 
 |                              n, read); | 
 |             else | 
 |                 PyErr_SetString(PyExc_EOFError, | 
 |                                 "EOF read where not expected"); | 
 |         } | 
 |         return NULL; | 
 |     } | 
 |     return p->buf; | 
 | } | 
 |  | 
 | static int | 
 | r_byte(RFILE *p) | 
 | { | 
 |     int c = EOF; | 
 |  | 
 |     if (p->ptr != NULL) { | 
 |         if (p->ptr < p->end) | 
 |             c = (unsigned char) *p->ptr++; | 
 |         return c; | 
 |     } | 
 |     if (!p->readable) { | 
 |         assert(p->fp); | 
 |         c = getc(p->fp); | 
 |     } | 
 |     else { | 
 |         char *ptr = r_string(1, p); | 
 |         if (ptr != NULL) | 
 |             c = *(unsigned char *) ptr; | 
 |     } | 
 |     return c; | 
 | } | 
 |  | 
 | static int | 
 | r_short(RFILE *p) | 
 | { | 
 |     short x = -1; | 
 |     unsigned char *buffer; | 
 |  | 
 |     buffer = (unsigned char *) r_string(2, p); | 
 |     if (buffer != NULL) { | 
 |         x = buffer[0]; | 
 |         x |= buffer[1] << 8; | 
 |         /* Sign-extension, in case short greater than 16 bits */ | 
 |         x |= -(x & 0x8000); | 
 |     } | 
 |     return x; | 
 | } | 
 |  | 
 | static long | 
 | r_long(RFILE *p) | 
 | { | 
 |     long x = -1; | 
 |     unsigned char *buffer; | 
 |  | 
 |     buffer = (unsigned char *) r_string(4, p); | 
 |     if (buffer != NULL) { | 
 |         x = buffer[0]; | 
 |         x |= (long)buffer[1] << 8; | 
 |         x |= (long)buffer[2] << 16; | 
 |         x |= (long)buffer[3] << 24; | 
 | #if SIZEOF_LONG > 4 | 
 |         /* Sign extension for 64-bit machines */ | 
 |         x |= -(x & 0x80000000L); | 
 | #endif | 
 |     } | 
 |     return x; | 
 | } | 
 |  | 
 | static PyObject * | 
 | r_PyLong(RFILE *p) | 
 | { | 
 |     PyLongObject *ob; | 
 |     long n, size, i; | 
 |     int j, md, shorts_in_top_digit; | 
 |     digit d; | 
 |  | 
 |     n = r_long(p); | 
 |     if (PyErr_Occurred()) | 
 |         return NULL; | 
 |     if (n == 0) | 
 |         return (PyObject *)_PyLong_New(0); | 
 |     if (n < -SIZE32_MAX || n > SIZE32_MAX) { | 
 |         PyErr_SetString(PyExc_ValueError, | 
 |                        "bad marshal data (long size out of range)"); | 
 |         return NULL; | 
 |     } | 
 |  | 
 |     size = 1 + (Py_ABS(n) - 1) / PyLong_MARSHAL_RATIO; | 
 |     shorts_in_top_digit = 1 + (Py_ABS(n) - 1) % PyLong_MARSHAL_RATIO; | 
 |     ob = _PyLong_New(size); | 
 |     if (ob == NULL) | 
 |         return NULL; | 
 |  | 
 |     Py_SIZE(ob) = n > 0 ? size : -size; | 
 |  | 
 |     for (i = 0; i < size-1; i++) { | 
 |         d = 0; | 
 |         for (j=0; j < PyLong_MARSHAL_RATIO; j++) { | 
 |             md = r_short(p); | 
 |             if (PyErr_Occurred()) { | 
 |                 Py_DECREF(ob); | 
 |                 return NULL; | 
 |             } | 
 |             if (md < 0 || md > PyLong_MARSHAL_BASE) | 
 |                 goto bad_digit; | 
 |             d += (digit)md << j*PyLong_MARSHAL_SHIFT; | 
 |         } | 
 |         ob->ob_digit[i] = d; | 
 |     } | 
 |  | 
 |     d = 0; | 
 |     for (j=0; j < shorts_in_top_digit; j++) { | 
 |         md = r_short(p); | 
 |         if (PyErr_Occurred()) { | 
 |             Py_DECREF(ob); | 
 |             return NULL; | 
 |         } | 
 |         if (md < 0 || md > PyLong_MARSHAL_BASE) | 
 |             goto bad_digit; | 
 |         /* topmost marshal digit should be nonzero */ | 
 |         if (md == 0 && j == shorts_in_top_digit - 1) { | 
 |             Py_DECREF(ob); | 
 |             PyErr_SetString(PyExc_ValueError, | 
 |                 "bad marshal data (unnormalized long data)"); | 
 |             return NULL; | 
 |         } | 
 |         d += (digit)md << j*PyLong_MARSHAL_SHIFT; | 
 |     } | 
 |     if (PyErr_Occurred()) { | 
 |         Py_DECREF(ob); | 
 |         return NULL; | 
 |     } | 
 |     /* top digit should be nonzero, else the resulting PyLong won't be | 
 |        normalized */ | 
 |     ob->ob_digit[size-1] = d; | 
 |     return (PyObject *)ob; | 
 |   bad_digit: | 
 |     Py_DECREF(ob); | 
 |     PyErr_SetString(PyExc_ValueError, | 
 |                     "bad marshal data (digit out of range in long)"); | 
 |     return NULL; | 
 | } | 
 |  | 
 | /* allocate the reflist index for a new object. Return -1 on failure */ | 
 | static Py_ssize_t | 
 | r_ref_reserve(int flag, RFILE *p) | 
 | { | 
 |     if (flag) { /* currently only FLAG_REF is defined */ | 
 |         Py_ssize_t idx = PyList_GET_SIZE(p->refs); | 
 |         if (idx >= 0x7ffffffe) { | 
 |             PyErr_SetString(PyExc_ValueError, "bad marshal data (index list too large)"); | 
 |             return -1; | 
 |         } | 
 |         if (PyList_Append(p->refs, Py_None) < 0) | 
 |             return -1; | 
 |         return idx; | 
 |     } else | 
 |         return 0; | 
 | } | 
 |  | 
 | /* insert the new object 'o' to the reflist at previously | 
 |  * allocated index 'idx'. | 
 |  * 'o' can be NULL, in which case nothing is done. | 
 |  * if 'o' was non-NULL, and the function succeeds, 'o' is returned. | 
 |  * if 'o' was non-NULL, and the function fails, 'o' is released and | 
 |  * NULL returned. This simplifies error checking at the call site since | 
 |  * a single test for NULL for the function result is enough. | 
 |  */ | 
 | static PyObject * | 
 | r_ref_insert(PyObject *o, Py_ssize_t idx, int flag, RFILE *p) | 
 | { | 
 |     if (o != NULL && flag) { /* currently only FLAG_REF is defined */ | 
 |         PyObject *tmp = PyList_GET_ITEM(p->refs, idx); | 
 |         Py_INCREF(o); | 
 |         PyList_SET_ITEM(p->refs, idx, o); | 
 |         Py_DECREF(tmp); | 
 |     } | 
 |     return o; | 
 | } | 
 |  | 
 | /* combination of both above, used when an object can be | 
 |  * created whenever it is seen in the file, as opposed to | 
 |  * after having loaded its sub-objects. | 
 |  */ | 
 | static PyObject * | 
 | r_ref(PyObject *o, int flag, RFILE *p) | 
 | { | 
 |     assert(flag & FLAG_REF); | 
 |     if (o == NULL) | 
 |         return NULL; | 
 |     if (PyList_Append(p->refs, o) < 0) { | 
 |         Py_DECREF(o); /* release the new object */ | 
 |         return NULL; | 
 |     } | 
 |     return o; | 
 | } | 
 |  | 
 | static PyObject * | 
 | r_object(RFILE *p) | 
 | { | 
 |     /* NULL is a valid return value, it does not necessarily means that | 
 |        an exception is set. */ | 
 |     PyObject *v, *v2; | 
 |     Py_ssize_t idx = 0; | 
 |     long i, n; | 
 |     int type, code = r_byte(p); | 
 |     int flag, is_interned = 0; | 
 |     PyObject *retval = NULL; | 
 |  | 
 |     if (code == EOF) { | 
 |         PyErr_SetString(PyExc_EOFError, | 
 |                         "EOF read where object expected"); | 
 |         return NULL; | 
 |     } | 
 |  | 
 |     p->depth++; | 
 |  | 
 |     if (p->depth > MAX_MARSHAL_STACK_DEPTH) { | 
 |         p->depth--; | 
 |         PyErr_SetString(PyExc_ValueError, "recursion limit exceeded"); | 
 |         return NULL; | 
 |     } | 
 |  | 
 |     flag = code & FLAG_REF; | 
 |     type = code & ~FLAG_REF; | 
 |  | 
 | #define R_REF(O) do{\ | 
 |     if (flag) \ | 
 |         O = r_ref(O, flag, p);\ | 
 | } while (0) | 
 |  | 
 |     switch (type) { | 
 |  | 
 |     case TYPE_NULL: | 
 |         break; | 
 |  | 
 |     case TYPE_NONE: | 
 |         Py_INCREF(Py_None); | 
 |         retval = Py_None; | 
 |         break; | 
 |  | 
 |     case TYPE_STOPITER: | 
 |         Py_INCREF(PyExc_StopIteration); | 
 |         retval = PyExc_StopIteration; | 
 |         break; | 
 |  | 
 |     case TYPE_ELLIPSIS: | 
 |         Py_INCREF(Py_Ellipsis); | 
 |         retval = Py_Ellipsis; | 
 |         break; | 
 |  | 
 |     case TYPE_FALSE: | 
 |         Py_INCREF(Py_False); | 
 |         retval = Py_False; | 
 |         break; | 
 |  | 
 |     case TYPE_TRUE: | 
 |         Py_INCREF(Py_True); | 
 |         retval = Py_True; | 
 |         break; | 
 |  | 
 |     case TYPE_INT: | 
 |         n = r_long(p); | 
 |         retval = PyErr_Occurred() ? NULL : PyLong_FromLong(n); | 
 |         R_REF(retval); | 
 |         break; | 
 |  | 
 |     case TYPE_LONG: | 
 |         retval = r_PyLong(p); | 
 |         R_REF(retval); | 
 |         break; | 
 |  | 
 |     case TYPE_FLOAT: | 
 |         { | 
 |             char buf[256], *ptr; | 
 |             double dx; | 
 |             n = r_byte(p); | 
 |             if (n == EOF) { | 
 |                 PyErr_SetString(PyExc_EOFError, | 
 |                     "EOF read where object expected"); | 
 |                 break; | 
 |             } | 
 |             ptr = r_string(n, p); | 
 |             if (ptr == NULL) | 
 |                 break; | 
 |             memcpy(buf, ptr, n); | 
 |             buf[n] = '\0'; | 
 |             dx = PyOS_string_to_double(buf, NULL, NULL); | 
 |             if (dx == -1.0 && PyErr_Occurred()) | 
 |                 break; | 
 |             retval = PyFloat_FromDouble(dx); | 
 |             R_REF(retval); | 
 |             break; | 
 |         } | 
 |  | 
 |     case TYPE_BINARY_FLOAT: | 
 |         { | 
 |             unsigned char *buf; | 
 |             double x; | 
 |             buf = (unsigned char *) r_string(8, p); | 
 |             if (buf == NULL) | 
 |                 break; | 
 |             x = _PyFloat_Unpack8(buf, 1); | 
 |             if (x == -1.0 && PyErr_Occurred()) | 
 |                 break; | 
 |             retval = PyFloat_FromDouble(x); | 
 |             R_REF(retval); | 
 |             break; | 
 |         } | 
 |  | 
 |     case TYPE_COMPLEX: | 
 |         { | 
 |             char buf[256], *ptr; | 
 |             Py_complex c; | 
 |             n = r_byte(p); | 
 |             if (n == EOF) { | 
 |                 PyErr_SetString(PyExc_EOFError, | 
 |                     "EOF read where object expected"); | 
 |                 break; | 
 |             } | 
 |             ptr = r_string(n, p); | 
 |             if (ptr == NULL) | 
 |                 break; | 
 |             memcpy(buf, ptr, n); | 
 |             buf[n] = '\0'; | 
 |             c.real = PyOS_string_to_double(buf, NULL, NULL); | 
 |             if (c.real == -1.0 && PyErr_Occurred()) | 
 |                 break; | 
 |             n = r_byte(p); | 
 |             if (n == EOF) { | 
 |                 PyErr_SetString(PyExc_EOFError, | 
 |                     "EOF read where object expected"); | 
 |                 break; | 
 |             } | 
 |             ptr = r_string(n, p); | 
 |             if (ptr == NULL) | 
 |                 break; | 
 |             memcpy(buf, ptr, n); | 
 |             buf[n] = '\0'; | 
 |             c.imag = PyOS_string_to_double(buf, NULL, NULL); | 
 |             if (c.imag == -1.0 && PyErr_Occurred()) | 
 |                 break; | 
 |             retval = PyComplex_FromCComplex(c); | 
 |             R_REF(retval); | 
 |             break; | 
 |         } | 
 |  | 
 |     case TYPE_BINARY_COMPLEX: | 
 |         { | 
 |             unsigned char *buf; | 
 |             Py_complex c; | 
 |             buf = (unsigned char *) r_string(8, p); | 
 |             if (buf == NULL) | 
 |                 break; | 
 |             c.real = _PyFloat_Unpack8(buf, 1); | 
 |             if (c.real == -1.0 && PyErr_Occurred()) | 
 |                 break; | 
 |             buf = (unsigned char *) r_string(8, p); | 
 |             if (buf == NULL) | 
 |                 break; | 
 |             c.imag = _PyFloat_Unpack8(buf, 1); | 
 |             if (c.imag == -1.0 && PyErr_Occurred()) | 
 |                 break; | 
 |             retval = PyComplex_FromCComplex(c); | 
 |             R_REF(retval); | 
 |             break; | 
 |         } | 
 |  | 
 |     case TYPE_STRING: | 
 |         { | 
 |             char *ptr; | 
 |             n = r_long(p); | 
 |             if (PyErr_Occurred()) | 
 |                 break; | 
 |             if (n < 0 || n > SIZE32_MAX) { | 
 |                 PyErr_SetString(PyExc_ValueError, "bad marshal data (string size out of range)"); | 
 |                 break; | 
 |             } | 
 |             v = PyBytes_FromStringAndSize((char *)NULL, n); | 
 |             if (v == NULL) | 
 |                 break; | 
 |             ptr = r_string(n, p); | 
 |             if (ptr == NULL) { | 
 |                 Py_DECREF(v); | 
 |                 break; | 
 |             } | 
 |             memcpy(PyBytes_AS_STRING(v), ptr, n); | 
 |             retval = v; | 
 |             R_REF(retval); | 
 |             break; | 
 |         } | 
 |  | 
 |     case TYPE_ASCII_INTERNED: | 
 |         is_interned = 1; | 
 |     case TYPE_ASCII: | 
 |         n = r_long(p); | 
 |         if (PyErr_Occurred()) | 
 |             break; | 
 |         if (n < 0 || n > SIZE32_MAX) { | 
 |             PyErr_SetString(PyExc_ValueError, "bad marshal data (unicode size out of range)"); | 
 |             break; | 
 |         } | 
 |         goto _read_ascii; | 
 |  | 
 |     case TYPE_SHORT_ASCII_INTERNED: | 
 |         is_interned = 1; | 
 |     case TYPE_SHORT_ASCII: | 
 |         n = r_byte(p); | 
 |         if (n == EOF) { | 
 |             PyErr_SetString(PyExc_EOFError, | 
 |                 "EOF read where object expected"); | 
 |             break; | 
 |         } | 
 |     _read_ascii: | 
 |         { | 
 |             char *ptr; | 
 |             ptr = r_string(n, p); | 
 |             if (ptr == NULL) | 
 |                 break; | 
 |             v = PyUnicode_FromKindAndData(PyUnicode_1BYTE_KIND, ptr, n); | 
 |             if (v == NULL) | 
 |                 break; | 
 |             if (is_interned) | 
 |                 PyUnicode_InternInPlace(&v); | 
 |             retval = v; | 
 |             R_REF(retval); | 
 |             break; | 
 |         } | 
 |  | 
 |     case TYPE_INTERNED: | 
 |         is_interned = 1; | 
 |     case TYPE_UNICODE: | 
 |         { | 
 |         char *buffer; | 
 |  | 
 |         n = r_long(p); | 
 |         if (PyErr_Occurred()) | 
 |             break; | 
 |         if (n < 0 || n > SIZE32_MAX) { | 
 |             PyErr_SetString(PyExc_ValueError, "bad marshal data (unicode size out of range)"); | 
 |             break; | 
 |         } | 
 |         if (n != 0) { | 
 |             buffer = r_string(n, p); | 
 |             if (buffer == NULL) | 
 |                 break; | 
 |             v = PyUnicode_DecodeUTF8(buffer, n, "surrogatepass"); | 
 |         } | 
 |         else { | 
 |             v = PyUnicode_New(0, 0); | 
 |         } | 
 |         if (v == NULL) | 
 |             break; | 
 |         if (is_interned) | 
 |             PyUnicode_InternInPlace(&v); | 
 |         retval = v; | 
 |         R_REF(retval); | 
 |         break; | 
 |         } | 
 |  | 
 |     case TYPE_SMALL_TUPLE: | 
 |         n = (unsigned char) r_byte(p); | 
 |         if (PyErr_Occurred()) | 
 |             break; | 
 |         goto _read_tuple; | 
 |     case TYPE_TUPLE: | 
 |         n = r_long(p); | 
 |         if (PyErr_Occurred()) | 
 |             break; | 
 |         if (n < 0 || n > SIZE32_MAX) { | 
 |             PyErr_SetString(PyExc_ValueError, "bad marshal data (tuple size out of range)"); | 
 |             break; | 
 |         } | 
 |     _read_tuple: | 
 |         v = PyTuple_New(n); | 
 |         R_REF(v); | 
 |         if (v == NULL) | 
 |             break; | 
 |  | 
 |         for (i = 0; i < n; i++) { | 
 |             v2 = r_object(p); | 
 |             if ( v2 == NULL ) { | 
 |                 if (!PyErr_Occurred()) | 
 |                     PyErr_SetString(PyExc_TypeError, | 
 |                         "NULL object in marshal data for tuple"); | 
 |                 Py_DECREF(v); | 
 |                 v = NULL; | 
 |                 break; | 
 |             } | 
 |             PyTuple_SET_ITEM(v, i, v2); | 
 |         } | 
 |         retval = v; | 
 |         break; | 
 |  | 
 |     case TYPE_LIST: | 
 |         n = r_long(p); | 
 |         if (PyErr_Occurred()) | 
 |             break; | 
 |         if (n < 0 || n > SIZE32_MAX) { | 
 |             PyErr_SetString(PyExc_ValueError, "bad marshal data (list size out of range)"); | 
 |             break; | 
 |         } | 
 |         v = PyList_New(n); | 
 |         R_REF(v); | 
 |         if (v == NULL) | 
 |             break; | 
 |         for (i = 0; i < n; i++) { | 
 |             v2 = r_object(p); | 
 |             if ( v2 == NULL ) { | 
 |                 if (!PyErr_Occurred()) | 
 |                     PyErr_SetString(PyExc_TypeError, | 
 |                         "NULL object in marshal data for list"); | 
 |                 Py_DECREF(v); | 
 |                 v = NULL; | 
 |                 break; | 
 |             } | 
 |             PyList_SET_ITEM(v, i, v2); | 
 |         } | 
 |         retval = v; | 
 |         break; | 
 |  | 
 |     case TYPE_DICT: | 
 |         v = PyDict_New(); | 
 |         R_REF(v); | 
 |         if (v == NULL) | 
 |             break; | 
 |         for (;;) { | 
 |             PyObject *key, *val; | 
 |             key = r_object(p); | 
 |             if (key == NULL) | 
 |                 break; | 
 |             val = r_object(p); | 
 |             if (val == NULL) { | 
 |                 Py_DECREF(key); | 
 |                 break; | 
 |             } | 
 |             if (PyDict_SetItem(v, key, val) < 0) { | 
 |                 Py_DECREF(key); | 
 |                 Py_DECREF(val); | 
 |                 break; | 
 |             } | 
 |             Py_DECREF(key); | 
 |             Py_DECREF(val); | 
 |         } | 
 |         if (PyErr_Occurred()) { | 
 |             Py_DECREF(v); | 
 |             v = NULL; | 
 |         } | 
 |         retval = v; | 
 |         break; | 
 |  | 
 |     case TYPE_SET: | 
 |     case TYPE_FROZENSET: | 
 |         n = r_long(p); | 
 |         if (PyErr_Occurred()) | 
 |             break; | 
 |         if (n < 0 || n > SIZE32_MAX) { | 
 |             PyErr_SetString(PyExc_ValueError, "bad marshal data (set size out of range)"); | 
 |             break; | 
 |         } | 
 |         v = (type == TYPE_SET) ? PySet_New(NULL) : PyFrozenSet_New(NULL); | 
 |         if (type == TYPE_SET) { | 
 |             R_REF(v); | 
 |         } else { | 
 |             /* must use delayed registration of frozensets because they must | 
 |              * be init with a refcount of 1 | 
 |              */ | 
 |             idx = r_ref_reserve(flag, p); | 
 |             if (idx < 0) | 
 |                 Py_CLEAR(v); /* signal error */ | 
 |         } | 
 |         if (v == NULL) | 
 |             break; | 
 |  | 
 |         for (i = 0; i < n; i++) { | 
 |             v2 = r_object(p); | 
 |             if ( v2 == NULL ) { | 
 |                 if (!PyErr_Occurred()) | 
 |                     PyErr_SetString(PyExc_TypeError, | 
 |                         "NULL object in marshal data for set"); | 
 |                 Py_DECREF(v); | 
 |                 v = NULL; | 
 |                 break; | 
 |             } | 
 |             if (PySet_Add(v, v2) == -1) { | 
 |                 Py_DECREF(v); | 
 |                 Py_DECREF(v2); | 
 |                 v = NULL; | 
 |                 break; | 
 |             } | 
 |             Py_DECREF(v2); | 
 |         } | 
 |         if (type != TYPE_SET) | 
 |             v = r_ref_insert(v, idx, flag, p); | 
 |         retval = v; | 
 |         break; | 
 |  | 
 |     case TYPE_CODE: | 
 |         { | 
 |             int argcount; | 
 |             int kwonlyargcount; | 
 |             int nlocals; | 
 |             int stacksize; | 
 |             int flags; | 
 |             PyObject *code = NULL; | 
 |             PyObject *consts = NULL; | 
 |             PyObject *names = NULL; | 
 |             PyObject *varnames = NULL; | 
 |             PyObject *freevars = NULL; | 
 |             PyObject *cellvars = NULL; | 
 |             PyObject *filename = NULL; | 
 |             PyObject *name = NULL; | 
 |             int firstlineno; | 
 |             PyObject *lnotab = NULL; | 
 |  | 
 |             idx = r_ref_reserve(flag, p); | 
 |             if (idx < 0) | 
 |                 break; | 
 |  | 
 |             v = NULL; | 
 |  | 
 |             /* XXX ignore long->int overflows for now */ | 
 |             argcount = (int)r_long(p); | 
 |             if (PyErr_Occurred()) | 
 |                 goto code_error; | 
 |             kwonlyargcount = (int)r_long(p); | 
 |             if (PyErr_Occurred()) | 
 |                 goto code_error; | 
 |             nlocals = (int)r_long(p); | 
 |             if (PyErr_Occurred()) | 
 |                 goto code_error; | 
 |             stacksize = (int)r_long(p); | 
 |             if (PyErr_Occurred()) | 
 |                 goto code_error; | 
 |             flags = (int)r_long(p); | 
 |             if (PyErr_Occurred()) | 
 |                 goto code_error; | 
 |             code = r_object(p); | 
 |             if (code == NULL) | 
 |                 goto code_error; | 
 |             consts = r_object(p); | 
 |             if (consts == NULL) | 
 |                 goto code_error; | 
 |             names = r_object(p); | 
 |             if (names == NULL) | 
 |                 goto code_error; | 
 |             varnames = r_object(p); | 
 |             if (varnames == NULL) | 
 |                 goto code_error; | 
 |             freevars = r_object(p); | 
 |             if (freevars == NULL) | 
 |                 goto code_error; | 
 |             cellvars = r_object(p); | 
 |             if (cellvars == NULL) | 
 |                 goto code_error; | 
 |             filename = r_object(p); | 
 |             if (filename == NULL) | 
 |                 goto code_error; | 
 |             if (PyUnicode_CheckExact(filename)) { | 
 |                 if (p->current_filename != NULL) { | 
 |                     if (!PyUnicode_Compare(filename, p->current_filename)) { | 
 |                         Py_DECREF(filename); | 
 |                         Py_INCREF(p->current_filename); | 
 |                         filename = p->current_filename; | 
 |                     } | 
 |                 } | 
 |                 else { | 
 |                     p->current_filename = filename; | 
 |                 } | 
 |             } | 
 |             name = r_object(p); | 
 |             if (name == NULL) | 
 |                 goto code_error; | 
 |             firstlineno = (int)r_long(p); | 
 |             if (firstlineno == -1 && PyErr_Occurred()) | 
 |                 break; | 
 |             lnotab = r_object(p); | 
 |             if (lnotab == NULL) | 
 |                 goto code_error; | 
 |  | 
 |             v = (PyObject *) PyCode_New( | 
 |                             argcount, kwonlyargcount, | 
 |                             nlocals, stacksize, flags, | 
 |                             code, consts, names, varnames, | 
 |                             freevars, cellvars, filename, name, | 
 |                             firstlineno, lnotab); | 
 |             v = r_ref_insert(v, idx, flag, p); | 
 |  | 
 |           code_error: | 
 |             Py_XDECREF(code); | 
 |             Py_XDECREF(consts); | 
 |             Py_XDECREF(names); | 
 |             Py_XDECREF(varnames); | 
 |             Py_XDECREF(freevars); | 
 |             Py_XDECREF(cellvars); | 
 |             Py_XDECREF(filename); | 
 |             Py_XDECREF(name); | 
 |             Py_XDECREF(lnotab); | 
 |         } | 
 |         retval = v; | 
 |         break; | 
 |  | 
 |     case TYPE_REF: | 
 |         n = r_long(p); | 
 |         if (n < 0 || n >= PyList_GET_SIZE(p->refs)) { | 
 |             if (n == -1 && PyErr_Occurred()) | 
 |                 break; | 
 |             PyErr_SetString(PyExc_ValueError, "bad marshal data (invalid reference)"); | 
 |             break; | 
 |         } | 
 |         v = PyList_GET_ITEM(p->refs, n); | 
 |         if (v == Py_None) { | 
 |             PyErr_SetString(PyExc_ValueError, "bad marshal data (invalid reference)"); | 
 |             break; | 
 |         } | 
 |         Py_INCREF(v); | 
 |         retval = v; | 
 |         break; | 
 |  | 
 |     default: | 
 |         /* Bogus data got written, which isn't ideal. | 
 |            This will let you keep working and recover. */ | 
 |         PyErr_SetString(PyExc_ValueError, "bad marshal data (unknown type code)"); | 
 |         break; | 
 |  | 
 |     } | 
 |     p->depth--; | 
 |     return retval; | 
 | } | 
 |  | 
 | static PyObject * | 
 | read_object(RFILE *p) | 
 | { | 
 |     PyObject *v; | 
 |     if (PyErr_Occurred()) { | 
 |         fprintf(stderr, "XXX readobject called with exception set\n"); | 
 |         return NULL; | 
 |     } | 
 |     v = r_object(p); | 
 |     if (v == NULL && !PyErr_Occurred()) | 
 |         PyErr_SetString(PyExc_TypeError, "NULL object in marshal data for object"); | 
 |     return v; | 
 | } | 
 |  | 
 | int | 
 | PyMarshal_ReadShortFromFile(FILE *fp) | 
 | { | 
 |     RFILE rf; | 
 |     int res; | 
 |     assert(fp); | 
 |     rf.readable = NULL; | 
 |     rf.fp = fp; | 
 |     rf.current_filename = NULL; | 
 |     rf.end = rf.ptr = NULL; | 
 |     rf.buf = NULL; | 
 |     res = r_short(&rf); | 
 |     if (rf.buf != NULL) | 
 |         PyMem_FREE(rf.buf); | 
 |     return res; | 
 | } | 
 |  | 
 | long | 
 | PyMarshal_ReadLongFromFile(FILE *fp) | 
 | { | 
 |     RFILE rf; | 
 |     long res; | 
 |     rf.fp = fp; | 
 |     rf.readable = NULL; | 
 |     rf.current_filename = NULL; | 
 |     rf.ptr = rf.end = NULL; | 
 |     rf.buf = NULL; | 
 |     res = r_long(&rf); | 
 |     if (rf.buf != NULL) | 
 |         PyMem_FREE(rf.buf); | 
 |     return res; | 
 | } | 
 |  | 
 | /* Return size of file in bytes; < 0 if unknown or INT_MAX if too big */ | 
 | static off_t | 
 | getfilesize(FILE *fp) | 
 | { | 
 |     struct _Py_stat_struct st; | 
 |     if (_Py_fstat(fileno(fp), &st) != 0) | 
 |         return -1; | 
 | #if SIZEOF_OFF_T == 4 | 
 |     else if (st.st_size >= INT_MAX) | 
 |         return (off_t)INT_MAX; | 
 | #endif | 
 |     else | 
 |         return (off_t)st.st_size; | 
 | } | 
 |  | 
 | /* If we can get the size of the file up-front, and it's reasonably small, | 
 |  * read it in one gulp and delegate to ...FromString() instead.  Much quicker | 
 |  * than reading a byte at a time from file; speeds .pyc imports. | 
 |  * CAUTION:  since this may read the entire remainder of the file, don't | 
 |  * call it unless you know you're done with the file. | 
 |  */ | 
 | PyObject * | 
 | PyMarshal_ReadLastObjectFromFile(FILE *fp) | 
 | { | 
 | /* REASONABLE_FILE_LIMIT is by defn something big enough for Tkinter.pyc. */ | 
 | #define REASONABLE_FILE_LIMIT (1L << 18) | 
 |     off_t filesize; | 
 |     filesize = getfilesize(fp); | 
 |     if (filesize > 0 && filesize <= REASONABLE_FILE_LIMIT) { | 
 |         char* pBuf = (char *)PyMem_MALLOC(filesize); | 
 |         if (pBuf != NULL) { | 
 |             size_t n = fread(pBuf, 1, (size_t)filesize, fp); | 
 |             PyObject* v = PyMarshal_ReadObjectFromString(pBuf, n); | 
 |             PyMem_FREE(pBuf); | 
 |             return v; | 
 |         } | 
 |  | 
 |     } | 
 |     /* We don't have fstat, or we do but the file is larger than | 
 |      * REASONABLE_FILE_LIMIT or malloc failed -- read a byte at a time. | 
 |      */ | 
 |     return PyMarshal_ReadObjectFromFile(fp); | 
 |  | 
 | #undef REASONABLE_FILE_LIMIT | 
 | } | 
 |  | 
 | PyObject * | 
 | PyMarshal_ReadObjectFromFile(FILE *fp) | 
 | { | 
 |     RFILE rf; | 
 |     PyObject *result; | 
 |     rf.fp = fp; | 
 |     rf.readable = NULL; | 
 |     rf.current_filename = NULL; | 
 |     rf.depth = 0; | 
 |     rf.ptr = rf.end = NULL; | 
 |     rf.buf = NULL; | 
 |     rf.refs = PyList_New(0); | 
 |     if (rf.refs == NULL) | 
 |         return NULL; | 
 |     result = r_object(&rf); | 
 |     Py_DECREF(rf.refs); | 
 |     if (rf.buf != NULL) | 
 |         PyMem_FREE(rf.buf); | 
 |     return result; | 
 | } | 
 |  | 
 | PyObject * | 
 | PyMarshal_ReadObjectFromString(const char *str, Py_ssize_t len) | 
 | { | 
 |     RFILE rf; | 
 |     PyObject *result; | 
 |     rf.fp = NULL; | 
 |     rf.readable = NULL; | 
 |     rf.current_filename = NULL; | 
 |     rf.ptr = (char *)str; | 
 |     rf.end = (char *)str + len; | 
 |     rf.buf = NULL; | 
 |     rf.depth = 0; | 
 |     rf.refs = PyList_New(0); | 
 |     if (rf.refs == NULL) | 
 |         return NULL; | 
 |     result = r_object(&rf); | 
 |     Py_DECREF(rf.refs); | 
 |     if (rf.buf != NULL) | 
 |         PyMem_FREE(rf.buf); | 
 |     return result; | 
 | } | 
 |  | 
 | PyObject * | 
 | PyMarshal_WriteObjectToString(PyObject *x, int version) | 
 | { | 
 |     WFILE wf; | 
 |  | 
 |     memset(&wf, 0, sizeof(wf)); | 
 |     wf.str = PyBytes_FromStringAndSize((char *)NULL, 50); | 
 |     if (wf.str == NULL) | 
 |         return NULL; | 
 |     wf.ptr = wf.buf = PyBytes_AS_STRING((PyBytesObject *)wf.str); | 
 |     wf.end = wf.ptr + PyBytes_Size(wf.str); | 
 |     wf.error = WFERR_OK; | 
 |     wf.version = version; | 
 |     if (w_init_refs(&wf, version)) { | 
 |         Py_DECREF(wf.str); | 
 |         return NULL; | 
 |     } | 
 |     w_object(x, &wf); | 
 |     w_clear_refs(&wf); | 
 |     if (wf.str != NULL) { | 
 |         char *base = PyBytes_AS_STRING((PyBytesObject *)wf.str); | 
 |         if (wf.ptr - base > PY_SSIZE_T_MAX) { | 
 |             Py_DECREF(wf.str); | 
 |             PyErr_SetString(PyExc_OverflowError, | 
 |                             "too much marshal data for a string"); | 
 |             return NULL; | 
 |         } | 
 |         if (_PyBytes_Resize(&wf.str, (Py_ssize_t)(wf.ptr - base)) < 0) | 
 |             return NULL; | 
 |     } | 
 |     if (wf.error != WFERR_OK) { | 
 |         Py_XDECREF(wf.str); | 
 |         if (wf.error == WFERR_NOMEMORY) | 
 |             PyErr_NoMemory(); | 
 |         else | 
 |             PyErr_SetString(PyExc_ValueError, | 
 |               (wf.error==WFERR_UNMARSHALLABLE)?"unmarshallable object" | 
 |                :"object too deeply nested to marshal"); | 
 |         return NULL; | 
 |     } | 
 |     return wf.str; | 
 | } | 
 |  | 
 | /* And an interface for Python programs... */ | 
 |  | 
 | static PyObject * | 
 | marshal_dump(PyObject *self, PyObject *args) | 
 | { | 
 |     /* XXX Quick hack -- need to do this differently */ | 
 |     PyObject *x; | 
 |     PyObject *f; | 
 |     int version = Py_MARSHAL_VERSION; | 
 |     PyObject *s; | 
 |     PyObject *res; | 
 |     _Py_IDENTIFIER(write); | 
 |  | 
 |     if (!PyArg_ParseTuple(args, "OO|i:dump", &x, &f, &version)) | 
 |         return NULL; | 
 |     s = PyMarshal_WriteObjectToString(x, version); | 
 |     if (s == NULL) | 
 |         return NULL; | 
 |     res = _PyObject_CallMethodId(f, &PyId_write, "O", s); | 
 |     Py_DECREF(s); | 
 |     return res; | 
 | } | 
 |  | 
 | PyDoc_STRVAR(dump_doc, | 
 | "dump(value, file[, version])\n\ | 
 | \n\ | 
 | Write the value on the open file. The value must be a supported type.\n\ | 
 | The file must be an open file object such as sys.stdout or returned by\n\ | 
 | open() or os.popen(). It must be opened in binary mode ('wb' or 'w+b').\n\ | 
 | \n\ | 
 | If the value has (or contains an object that has) an unsupported type, a\n\ | 
 | ValueError exception is raised — but garbage data will also be written\n\ | 
 | to the file. The object will not be properly read back by load()\n\ | 
 | \n\ | 
 | The version argument indicates the data format that dump should use."); | 
 |  | 
 | static PyObject * | 
 | marshal_load(PyObject *self, PyObject *f) | 
 | { | 
 |     PyObject *data, *result; | 
 |     _Py_IDENTIFIER(read); | 
 |     RFILE rf; | 
 |  | 
 |     /* | 
 |      * Make a call to the read method, but read zero bytes. | 
 |      * This is to ensure that the object passed in at least | 
 |      * has a read method which returns bytes. | 
 |      * This can be removed if we guarantee good error handling | 
 |      * for r_string() | 
 |      */ | 
 |     data = _PyObject_CallMethodId(f, &PyId_read, "i", 0); | 
 |     if (data == NULL) | 
 |         return NULL; | 
 |     if (!PyBytes_Check(data)) { | 
 |         PyErr_Format(PyExc_TypeError, | 
 |                      "f.read() returned not bytes but %.100s", | 
 |                      data->ob_type->tp_name); | 
 |         result = NULL; | 
 |     } | 
 |     else { | 
 |         rf.depth = 0; | 
 |         rf.fp = NULL; | 
 |         rf.readable = f; | 
 |         rf.current_filename = NULL; | 
 |         rf.ptr = rf.end = NULL; | 
 |         rf.buf = NULL; | 
 |         if ((rf.refs = PyList_New(0)) != NULL) { | 
 |             result = read_object(&rf); | 
 |             Py_DECREF(rf.refs); | 
 |             if (rf.buf != NULL) | 
 |                 PyMem_FREE(rf.buf); | 
 |         } else | 
 |             result = NULL; | 
 |     } | 
 |     Py_DECREF(data); | 
 |     return result; | 
 | } | 
 |  | 
 | PyDoc_STRVAR(load_doc, | 
 | "load(file)\n\ | 
 | \n\ | 
 | Read one value from the open file and return it. If no valid value is\n\ | 
 | read (e.g. because the data has a different Python version’s\n\ | 
 | incompatible marshal format), raise EOFError, ValueError or TypeError.\n\ | 
 | The file must be an open file object opened in binary mode ('rb' or\n\ | 
 | 'r+b').\n\ | 
 | \n\ | 
 | Note: If an object containing an unsupported type was marshalled with\n\ | 
 | dump(), load() will substitute None for the unmarshallable type."); | 
 |  | 
 |  | 
 | static PyObject * | 
 | marshal_dumps(PyObject *self, PyObject *args) | 
 | { | 
 |     PyObject *x; | 
 |     int version = Py_MARSHAL_VERSION; | 
 |     if (!PyArg_ParseTuple(args, "O|i:dumps", &x, &version)) | 
 |         return NULL; | 
 |     return PyMarshal_WriteObjectToString(x, version); | 
 | } | 
 |  | 
 | PyDoc_STRVAR(dumps_doc, | 
 | "dumps(value[, version])\n\ | 
 | \n\ | 
 | Return the string that would be written to a file by dump(value, file).\n\ | 
 | The value must be a supported type. Raise a ValueError exception if\n\ | 
 | value has (or contains an object that has) an unsupported type.\n\ | 
 | \n\ | 
 | The version argument indicates the data format that dumps should use."); | 
 |  | 
 |  | 
 | static PyObject * | 
 | marshal_loads(PyObject *self, PyObject *args) | 
 | { | 
 |     RFILE rf; | 
 |     Py_buffer p; | 
 |     char *s; | 
 |     Py_ssize_t n; | 
 |     PyObject* result; | 
 |     if (!PyArg_ParseTuple(args, "y*:loads", &p)) | 
 |         return NULL; | 
 |     s = p.buf; | 
 |     n = p.len; | 
 |     rf.fp = NULL; | 
 |     rf.readable = NULL; | 
 |     rf.current_filename = NULL; | 
 |     rf.ptr = s; | 
 |     rf.end = s + n; | 
 |     rf.depth = 0; | 
 |     if ((rf.refs = PyList_New(0)) == NULL) | 
 |         return NULL; | 
 |     result = read_object(&rf); | 
 |     PyBuffer_Release(&p); | 
 |     Py_DECREF(rf.refs); | 
 |     return result; | 
 | } | 
 |  | 
 | PyDoc_STRVAR(loads_doc, | 
 | "loads(bytes)\n\ | 
 | \n\ | 
 | Convert the bytes object to a value. If no valid value is found, raise\n\ | 
 | EOFError, ValueError or TypeError. Extra characters in the input are\n\ | 
 | ignored."); | 
 |  | 
 | static PyMethodDef marshal_methods[] = { | 
 |     {"dump",            marshal_dump,   METH_VARARGS,   dump_doc}, | 
 |     {"load",            marshal_load,   METH_O,         load_doc}, | 
 |     {"dumps",           marshal_dumps,  METH_VARARGS,   dumps_doc}, | 
 |     {"loads",           marshal_loads,  METH_VARARGS,   loads_doc}, | 
 |     {NULL,              NULL}           /* sentinel */ | 
 | }; | 
 |  | 
 |  | 
 | PyDoc_STRVAR(module_doc, | 
 | "This module contains functions that can read and write Python values in\n\ | 
 | a binary format. The format is specific to Python, but independent of\n\ | 
 | machine architecture issues.\n\ | 
 | \n\ | 
 | Not all Python object types are supported; in general, only objects\n\ | 
 | whose value is independent from a particular invocation of Python can be\n\ | 
 | written and read by this module. The following types are supported:\n\ | 
 | None, integers, floating point numbers, strings, bytes, bytearrays,\n\ | 
 | tuples, lists, sets, dictionaries, and code objects, where it\n\ | 
 | should be understood that tuples, lists and dictionaries are only\n\ | 
 | supported as long as the values contained therein are themselves\n\ | 
 | supported; and recursive lists and dictionaries should not be written\n\ | 
 | (they will cause infinite loops).\n\ | 
 | \n\ | 
 | Variables:\n\ | 
 | \n\ | 
 | version -- indicates the format that the module uses. Version 0 is the\n\ | 
 |     historical format, version 1 shares interned strings and version 2\n\ | 
 |     uses a binary format for floating point numbers.\n\ | 
 |     Version 3 shares common object references (New in version 3.4).\n\ | 
 | \n\ | 
 | Functions:\n\ | 
 | \n\ | 
 | dump() -- write value to a file\n\ | 
 | load() -- read value from a file\n\ | 
 | dumps() -- write value to a string\n\ | 
 | loads() -- read value from a string"); | 
 |  | 
 |  | 
 |  | 
 | static struct PyModuleDef marshalmodule = { | 
 |     PyModuleDef_HEAD_INIT, | 
 |     "marshal", | 
 |     module_doc, | 
 |     0, | 
 |     marshal_methods, | 
 |     NULL, | 
 |     NULL, | 
 |     NULL, | 
 |     NULL | 
 | }; | 
 |  | 
 | PyMODINIT_FUNC | 
 | PyMarshal_Init(void) | 
 | { | 
 |     PyObject *mod = PyModule_Create(&marshalmodule); | 
 |     if (mod == NULL) | 
 |         return NULL; | 
 |     PyModule_AddIntConstant(mod, "version", Py_MARSHAL_VERSION); | 
 |     return mod; | 
 | } |