diff --git a/Doc/lib/libformatter.tex b/Doc/lib/libformatter.tex
index 5d06995..4440815 100644
--- a/Doc/lib/libformatter.tex
+++ b/Doc/lib/libformatter.tex
@@ -37,6 +37,7 @@
 
 One data element is defined at the module level:
 
+
 \begin{datadesc}{AS_IS}
 Value which can be used in the font specification passed to the
 \code{push_font()} method described below, or as the new value to any
@@ -47,33 +48,30 @@
 
 The following attributes are defined for formatter instance objects:
 
-\setindexsubitem{(formatter attribute)}
 
-\begin{datadesc}{writer}
+\begin{memberdesc}[formatter]{writer}
 The writer instance with which the formatter interacts.
-\end{datadesc}
+\end{memberdesc}
 
 
-\setindexsubitem{(formatter method)}
-
-\begin{funcdesc}{end_paragraph}{blanklines}
+\begin{methoddesc}[formatter]{end_paragraph}{blanklines}
 Close any open paragraphs and insert at least \var{blanklines}
 before the next paragraph.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{add_line_break}{}
+\begin{methoddesc}[formatter]{add_line_break}{}
 Add a hard line break if one does not already exist.  This does not
 break the logical paragraph.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{add_hor_rule}{*args, **kw}
+\begin{methoddesc}[formatter]{add_hor_rule}{*args, **kw}
 Insert a horizontal rule in the output.  A hard break is inserted if
 there is data in the current paragraph, but the logical paragraph is
 not broken.  The arguments and keywords are passed on to the writer's
 \method{send_line_break()} method.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{add_flowing_data}{data}
+\begin{methoddesc}[formatter]{add_flowing_data}{data}
 Provide data which should be formatted with collapsed whitespaces.
 Whitespace from preceeding and successive calls to
 \method{add_flowing_data()} is considered as well when the whitespace
@@ -81,15 +79,15 @@
 expected to be word-wrapped by the output device.  Note that any
 word-wrapping still must be performed by the writer object due to the
 need to rely on device and font information.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{add_literal_data}{data}
+\begin{methoddesc}[formatter]{add_literal_data}{data}
 Provide data which should be passed to the writer unchanged.
 Whitespace, including newline and tab characters, are considered legal
 in the value of \var{data}.  
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{add_label_data}{format, counter}
+\begin{methoddesc}[formatter]{add_label_data}{format, counter}
 Insert a label which should be placed to the left of the current left
 margin.  This should be used for constructing bulleted or numbered
 lists.  If the \var{format} value is a string, it is interpreted as a
@@ -111,74 +109,74 @@
 represent the counter value in Roman numerals, in upper and lower
 case.  Note that the alphabetic and roman transforms require that the
 counter value be greater than zero.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{flush_softspace}{}
+\begin{methoddesc}[formatter]{flush_softspace}{}
 Send any pending whitespace buffered from a previous call to
 \method{add_flowing_data()} to the associated writer object.  This
 should be called before any direct manipulation of the writer object.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{push_alignment}{align}
+\begin{methoddesc}[formatter]{push_alignment}{align}
 Push a new alignment setting onto the alignment stack.  This may be
 \constant{AS_IS} if no change is desired.  If the alignment value is
 changed from the previous setting, the writer's \method{new_alignment()}
 method is called with the \var{align} value.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{pop_alignment}{}
+\begin{methoddesc}[formatter]{pop_alignment}{}
 Restore the previous alignment.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{push_font}{\code{(}size, italic, bold, teletype\code{)}}
+\begin{methoddesc}[formatter]{push_font}{\code{(}size, italic, bold, teletype\code{)}}
 Change some or all font properties of the writer object.  Properties
 which are not set to \constant{AS_IS} are set to the values passed in
 while others are maintained at their current settings.  The writer's
 \method{new_font()} method is called with the fully resolved font
 specification.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{pop_font}{}
+\begin{methoddesc}[formatter]{pop_font}{}
 Restore the previous font.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{push_margin}{margin}
+\begin{methoddesc}[formatter]{push_margin}{margin}
 Increase the number of left margin indentations by one, associating
 the logical tag \var{margin} with the new indentation.  The initial
 margin level is \code{0}.  Changed values of the logical tag must be
 true values; false values other than \constant{AS_IS} are not
 sufficient to change the margin.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{pop_margin}{}
+\begin{methoddesc}[formatter]{pop_margin}{}
 Restore the previous margin.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{push_style}{*styles}
+\begin{methoddesc}[formatter]{push_style}{*styles}
 Push any number of arbitrary style specifications.  All styles are
 pushed onto the styles stack in order.  A tuple representing the
 entire stack, including \constant{AS_IS} values, is passed to the
 writer's \method{new_styles()} method.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{pop_style}{\optional{n\code{ = 1}}}
+\begin{methoddesc}[formatter]{pop_style}{\optional{n\code{ = 1}}}
 Pop the last \var{n} style specifications passed to
 \method{push_style()}.  A tuple representing the revised stack,
 including \constant{AS_IS} values, is passed to the writer's
 \method{new_styles()} method.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{set_spacing}{spacing}
+\begin{methoddesc}[formatter]{set_spacing}{spacing}
 Set the spacing style for the writer.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{assert_line_data}{\optional{flag\code{ = 1}}}
+\begin{methoddesc}[formatter]{assert_line_data}{\optional{flag\code{ = 1}}}
 Inform the formatter that data has been added to the current paragraph
 out-of-band.  This should be used when the writer has been manipulated
 directly.  The optional \var{flag} argument can be set to false if
 the writer manipulations produced a hard line break at the end of the
 output.
-\end{funcdesc}
+\end{methoddesc}
 
 
 \subsection{Formatter Implementations}
@@ -213,21 +211,20 @@
 \class{AbstractFormatter} class as a formatter, the writer must
 typically be provided by the application.
 
-\setindexsubitem{(writer method)}
 
-\begin{funcdesc}{flush}{}
+\begin{methoddesc}[writer]{flush}{}
 Flush any buffered output or device control events.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{new_alignment}{align}
+\begin{methoddesc}[writer]{new_alignment}{align}
 Set the alignment style.  The \var{align} value can be any object,
 but by convention is a string or \code{None}, where \code{None}
 indicates that the writer's ``preferred'' alignment should be used.
 Conventional \var{align} values are \code{'left'}, \code{'center'},
 \code{'right'}, and \code{'justify'}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{new_font}{font}
+\begin{methoddesc}[writer]{new_font}{font}
 Set the font style.  The value of \var{font} will be \code{None},
 indicating that the device's default font should be used, or a tuple
 of the form \code{(}\var{size}, \var{italic}, \var{bold},
@@ -236,67 +233,67 @@
 must be defined by the application.  The \var{italic}, \var{bold}, and
 \var{teletype} values are boolean indicators specifying which of those
 font attributes should be used.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{new_margin}{margin, level}
+\begin{methoddesc}[writer]{new_margin}{margin, level}
 Set the margin level to the integer \var{level} and the logical tag
 to \var{margin}.  Interpretation of the logical tag is at the
 writer's discretion; the only restriction on the value of the logical
 tag is that it not be a false value for non-zero values of
 \var{level}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{new_spacing}{spacing}
+\begin{methoddesc}[writer]{new_spacing}{spacing}
 Set the spacing style to \var{spacing}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{new_styles}{styles}
+\begin{methoddesc}[writer]{new_styles}{styles}
 Set additional styles.  The \var{styles} value is a tuple of
 arbitrary values; the value \constant{AS_IS} should be ignored.  The
 \var{styles} tuple may be interpreted either as a set or as a stack
 depending on the requirements of the application and writer
 implementation.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_line_break}{}
+\begin{methoddesc}[writer]{send_line_break}{}
 Break the current line.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_paragraph}{blankline}
+\begin{methoddesc}[writer]{send_paragraph}{blankline}
 Produce a paragraph separation of at least \var{blankline} blank
 lines, or the equivelent.  The \var{blankline} value will be an
 integer.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_hor_rule}{*args, **kw}
+\begin{methoddesc}[writer]{send_hor_rule}{*args, **kw}
 Display a horizontal rule on the output device.  The arguments to this
 method are entirely application- and writer-specific, and should be
 interpreted with care.  The method implementation may assume that a
 line break has already been issued via \method{send_line_break()}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_flowing_data}{data}
+\begin{methoddesc}[writer]{send_flowing_data}{data}
 Output character data which may be word-wrapped and re-flowed as
 needed.  Within any sequence of calls to this method, the writer may
 assume that spans of multiple whitespace characters have been
 collapsed to single space characters.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_literal_data}{data}
+\begin{methoddesc}[writer]{send_literal_data}{data}
 Output character data which has already been formatted
 for display.  Generally, this should be interpreted to mean that line
 breaks indicated by newline characters should be preserved and no new
 line breaks should be introduced.  The data may contain embedded
 newline and tab characters, unlike data provided to the
 \method{send_formatted_data()} interface.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_label_data}{data}
+\begin{methoddesc}[writer]{send_label_data}{data}
 Set \var{data} to the left of the current left margin, if possible.
 The value of \var{data} is not restricted; treatment of non-string
 values is entirely application- and writer-dependent.  This method
 will only be called at the beginning of a line.
-\end{funcdesc}
+\end{methoddesc}
 
 
 \subsection{Writer Implementations}
diff --git a/Doc/lib/libhtmllib.tex b/Doc/lib/libhtmllib.tex
index dff837c..7737845 100644
--- a/Doc/lib/libhtmllib.tex
+++ b/Doc/lib/libhtmllib.tex
@@ -70,53 +70,50 @@
 In addition to tag methods, the \class{HTMLParser} class provides some
 additional methods and instance variables for use within tag methods.
 
-\setindexsubitem{(HTMLParser attribute)}
-
-\begin{datadesc}{formatter}
+\begin{memberdesc}{formatter}
 This is the formatter instance associated with the parser.
-\end{datadesc}
+\end{memberdesc}
 
-\begin{datadesc}{nofill}
+\begin{memberdesc}{nofill}
 Boolean flag which should be true when whitespace should not be
 collapsed, or false when it should be.  In general, this should only
 be true when character data is to be treated as ``preformatted'' text,
 as within a \code{<PRE>} element.  The default value is false.  This
 affects the operation of \method{handle_data()} and \method{save_end()}.
-\end{datadesc}
+\end{memberdesc}
 
-\setindexsubitem{(HTMLParser method)}
 
-\begin{funcdesc}{anchor_bgn}{href, name, type}
+\begin{methoddesc}{anchor_bgn}{href, name, type}
 This method is called at the start of an anchor region.  The arguments
 correspond to the attributes of the \code{<A>} tag with the same
 names.  The default implementation maintains a list of hyperlinks
 (defined by the \code{href} attribute) within the document.  The list
 of hyperlinks is available as the data attribute \code{anchorlist}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{anchor_end}{}
+\begin{methoddesc}{anchor_end}{}
 This method is called at the end of an anchor region.  The default
 implementation adds a textual footnote marker using an index into the
 list of hyperlinks created by \method{anchor_bgn()}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_image}{source, alt\optional{, ismap\optional{, align\optional{, width\optional{, height}}}}}
+\begin{methoddesc}{handle_image}{source, alt\optional{, ismap\optional{, align\optional{, width\optional{, height}}}}}
 This method is called to handle images.  The default implementation
 simply passes the \var{alt} value to the \method{handle_data()}
 method.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{save_bgn}{}
+\begin{methoddesc}{save_bgn}{}
 Begins saving character data in a buffer instead of sending it to the
 formatter object.  Retrieve the stored data via \method{save_end()}.
 Use of the \method{save_bgn()} / \method{save_end()} pair may not be
 nested.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{save_end}{}
+\begin{methoddesc}{save_end}{}
 Ends buffering character data and returns all data saved since the
 preceeding call to \method{save_bgn()}.  If the \code{nofill} flag is
 false, whitespace is collapsed to single spaces.  A call to this
 method without a preceeding call to \method{save_bgn()} will raise a
 \exception{TypeError} exception.
-\end{funcdesc}
+\end{methoddesc}
diff --git a/Doc/lib/libpprint.tex b/Doc/lib/libpprint.tex
index 6f03431..8062576 100644
--- a/Doc/lib/libpprint.tex
+++ b/Doc/lib/libpprint.tex
@@ -142,32 +142,31 @@
 
 \class{PrettyPrinter} instances have the following methods:
 
-\setindexsubitem{(PrettyPrinter method)}
 
-\begin{funcdesc}{pformat}{object}
+\begin{methoddesc}{pformat}{object}
 Return the formatted representation of \var{object}.  This takes into
-account the options passed to the \class{PrettyPrinter} constructor.
-\end{funcdesc}
+Account the options passed to the \class{PrettyPrinter} constructor.
+\end{methoddesc}
 
-\begin{funcdesc}{pprint}{object}
+\begin{methoddesc}{pprint}{object}
 Print the formatted representation of \var{object} on the configured
 stream, followed by a newline.
-\end{funcdesc}
+\end{methoddesc}
 
 The following methods provide the implementations for the
 corresponding functions of the same names.  Using these methods on an
 instance is slightly more efficient since new \class{PrettyPrinter}
 objects don't need to be created.
 
-\begin{funcdesc}{isreadable}{object}
+\begin{methoddesc}{isreadable}{object}
 Determine if the formatted representation of the object is
 ``readable,'' or can be used to reconstruct the value using
 \function{eval()}\bifuncindex{eval}.  Note that this returns false for
 recursive objects.  If the \var{depth} parameter of the
 \class{PrettyPrinter} is set and the object is deeper than allowed,
 this returns false.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{isrecursive}{object}
+\begin{methoddesc}{isrecursive}{object}
 Determine if the object requires a recursive representation.
-\end{funcdesc}
+\end{methoddesc}
diff --git a/Doc/lib/libprofile.tex b/Doc/lib/libprofile.tex
index cdf8c4e..b7a1c1e 100644
--- a/Doc/lib/libprofile.tex
+++ b/Doc/lib/libprofile.tex
@@ -1,7 +1,5 @@
 \chapter{The Python Profiler}
 \label{profile}
-\stmodindex{profile}
-\stmodindex{pstats}
 
 Copyright \copyright{} 1994, by InfoSeek Corporation, all rights reserved.
 
@@ -256,8 +254,9 @@
 
 
 \section{Reference Manual}
+\stmodindex{profile}
+\label{module-profile}
 
-\setindexsubitem{(in module profile)}
 
 The primary entry point for the profiler is the global function
 \function{profile.run()}.  It is typically used to create any profile
@@ -269,7 +268,7 @@
 ``better'' profilers from the classes presented, or reading the source
 code for these modules.
 
-\begin{funcdesc}{profile.run}{string\optional{, filename\optional{, ...}}}
+\begin{funcdesc}{run}{string\optional{, filename\optional{, ...}}}
 
 This function takes a single argument that has can be passed to the
 \keyword{exec} statement, and an optional file name.  In all cases this
@@ -336,7 +335,8 @@
 Analysis of the profiler data is done using this class from the
 \module{pstats} module:
 
-\setindexsubitem{(in module pstats)}
+% now switch modules....
+\stmodindex{pstats}
 
 \begin{classdesc}{Stats}{filename\optional{, ...}}
 This class constructor creates an instance of a ``statistics object''
@@ -361,7 +361,7 @@
 
 \setindexsubitem{(Stats method)}
 
-\begin{funcdesc}{strip_dirs}{}
+\begin{methoddesc}{strip_dirs}{}
 This method for the \class{Stats} class removes all leading path
 information from file names.  It is very useful in reducing the size
 of the printout to fit within (close to) 80 columns.  This method
@@ -372,19 +372,19 @@
 function names to be indistinguishable (i.e., they are on the same
 line of the same filename, and have the same function name), then the
 statistics for these two entries are accumulated into a single entry.
-\end{funcdesc}
+\end{methoddesc}
 
 
-\begin{funcdesc}{add}{filename\optional{, ...}}
+\begin{methoddesc}{add}{filename\optional{, ...}}
 This method of the \class{Stats} class accumulates additional
 profiling information into the current profiling object.  Its
 arguments should refer to filenames created by the corresponding
 version of \function{profile.run()}.  Statistics for identically named
 (re: file, line, name) functions are automatically accumulated into
 single function statistics.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{sort_stats}{key\optional{, ...}}
+\begin{methoddesc}{sort_stats}{key\optional{, ...}}
 This method modifies the \class{Stats} object by sorting it according
 to the supplied criteria.  The argument is typically a string
 identifying the basis of a sort (example: \code{"time"} or
@@ -430,18 +430,18 @@
 \code{"cumulative"} respectively.  If this old style format (numeric)
 is used, only one sort key (the numeric key) will be used, and
 additional arguments will be silently ignored.
-\end{funcdesc}
+\end{methoddesc}
 
 
-\begin{funcdesc}{reverse_order}{}
+\begin{methoddesc}{reverse_order}{}
 This method for the \class{Stats} class reverses the ordering of the basic
 list within the object.  This method is provided primarily for
 compatibility with the old profiler.  Its utility is questionable
 now that ascending vs descending order is properly selected based on
 the sort key of choice.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{print_stats}{restriction\optional{, ...}}
+\begin{methoddesc}{print_stats}{restriction\optional{, ...}}
 This method for the \class{Stats} class prints out a report as described
 in the \function{profile.run()} definition.
 
@@ -473,10 +473,10 @@
 
 would limit the list to all functions having file names \samp{.*foo:},
 and then proceed to only print the first 10\% of them.
-\end{funcdesc}
+\end{methoddesc}
 
 
-\begin{funcdesc}{print_callers}{restrictions\optional{, ...}}
+\begin{methoddesc}{print_callers}{restrictions\optional{, ...}}
 This method for the \class{Stats} class prints a list of all functions
 that called each function in the profiled database.  The ordering is
 identical to that provided by \method{print_stats()}, and the definition
@@ -484,16 +484,16 @@
 number is shown in parentheses after each caller to show how many
 times this specific call was made.  A second non-parenthesized number
 is the cumulative time spent in the function at the right.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{print_callees}{restrictions\optional{, ...}}
+\begin{methoddesc}{print_callees}{restrictions\optional{, ...}}
 This method for the \class{Stats} class prints a list of all function
 that were called by the indicated function.  Aside from this reversal
 of direction of calls (re: called vs was called by), the arguments and
 ordering are identical to the \method{print_callers()} method.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{ignore}{}
+\begin{methoddesc}{ignore}{}
 This method of the \class{Stats} class is used to dispose of the value
 returned by earlier methods.  All standard methods in this class
 return the instance that is being processed, so that the commands can
@@ -503,7 +503,7 @@
 pstats.Stats('foofile').strip_dirs().sort_stats('cum') \
                        .print_stats().ignore()
 \end{verbatim}
-%
+
 would perform all the indicated functions, but it would not return
 the final reference to the \class{Stats} instance.%
 \footnote{
@@ -511,7 +511,7 @@
 result that was not \code{None}.  The method is still defined for
 backward compatibility.
 }
-\end{funcdesc}
+\end{methoddesc}
 
 
 \section{Limitations}
diff --git a/Doc/lib/libqueue.tex b/Doc/lib/libqueue.tex
index 562623a..db6cabc 100644
--- a/Doc/lib/libqueue.tex
+++ b/Doc/lib/libqueue.tex
@@ -37,34 +37,32 @@
 is not described here.  See the source code for details.  The public
 methods are:
 
-\setindexsubitem{(Queue method)}
-
-\begin{funcdesc}{qsize}{}
+\begin{methoddesc}{qsize}{}
 Returns the approximate size of the queue.  Because of multithreading
 semantics, this number is not reliable.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{empty}{}
+\begin{methoddesc}{empty}{}
 Returns \code{1} if the queue is empty, \code{0} otherwise.  Because
 of multithreading semantics, this is not reliable.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{full}{}
+\begin{methoddesc}{full}{}
 Returns \code{1} if the queue is full, \code{0} otherwise.  Because of
 multithreading semantics, this is not reliable.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{put}{item}
+\begin{methoddesc}{put}{item}
 Puts \var{item} into the queue.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{get}{}
+\begin{methoddesc}{get}{}
 Gets and returns an item from the queue, blocking if necessary until
 one is available.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{get_nowait}{}
+\begin{methoddesc}{get_nowait}{}
 Gets and returns an item from the queue if one is immediately
 available.  Raises an \exception{Empty} exception if the queue is
 empty or if the queue's emptiness cannot be determined.
-\end{funcdesc}
+\end{methoddesc}
diff --git a/Doc/lib/libsgmllib.tex b/Doc/lib/libsgmllib.tex
index f93095b..f86e729 100644
--- a/Doc/lib/libsgmllib.tex
+++ b/Doc/lib/libsgmllib.tex
@@ -38,37 +38,36 @@
 
 \class{SGMLParser} instances have the following interface methods:
 
-\setindexsubitem{(SGMLParser method)}
 
-\begin{funcdesc}{reset}{}
+\begin{methoddesc}{reset}{}
 Reset the instance.  Loses all unprocessed data.  This is called
 implicitly at instantiation time.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{setnomoretags}{}
+\begin{methoddesc}{setnomoretags}{}
 Stop processing tags.  Treat all following input as literal input
 (CDATA).  (This is only provided so the HTML tag \code{<PLAINTEXT>}
 can be implemented.)
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{setliteral}{}
+\begin{methoddesc}{setliteral}{}
 Enter literal mode (CDATA mode).
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{feed}{data}
+\begin{methoddesc}{feed}{data}
 Feed some text to the parser.  It is processed insofar as it consists
 of complete elements; incomplete data is buffered until more data is
 fed or \method{close()} is called.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{close}{}
+\begin{methoddesc}{close}{}
 Force processing of all buffered data as if it were followed by an
 end-of-file mark.  This method may be redefined by a derived class to
 define additional processing at the end of the input, but the
 redefined version should always call \method{close()}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_starttag}{tag, method, attributes}
+\begin{methoddesc}{handle_starttag}{tag, method, attributes}
 This method is called to handle start tags for which either a
 \code{start_\var{tag}()} or \code{do_\var{tag}()} method has been
 defined.  The \var{tag} argument is the name of the tag converted to
@@ -82,9 +81,9 @@
 method would be called as \samp{unknown_starttag('a', [('href',
 'http://www.cwi.nl/')])}.  The base implementation simply calls
 \var{method} with \var{attributes} as the only argument.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_endtag}{tag, method}
+\begin{methoddesc}{handle_endtag}{tag, method}
 This method is called to handle endtags for which an
 \code{end_\var{tag}()} method has been defined.  The \var{tag}
 argument is the name of the tag converted to lower case, and the
@@ -93,15 +92,15 @@
 \code{end_\var{tag}()} method is defined for the closing element,
 this handler is not called.  The base implementation simply calls
 \var{method}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_data}{data}
+\begin{methoddesc}{handle_data}{data}
 This method is called to process arbitrary data.  It is intended to be
 overridden by a derived class; the base class implementation does
 nothing.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_charref}{ref}
+\begin{methoddesc}{handle_charref}{ref}
 This method is called to process a character reference of the form
 \samp{\&\#\var{ref};}.  In the base implementation, \var{ref} must
 be a decimal number in the
@@ -111,9 +110,9 @@
 \code{unknown_charref(\var{ref})} is called to handle the error.  A
 subclass must override this method to provide support for named
 character entities.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_entityref}{ref}
+\begin{methoddesc}{handle_entityref}{ref}
 This method is called to process a general entity reference of the
 form \samp{\&\var{ref};} where \var{ref} is an general entity
 reference.  It looks for \var{ref} in the instance (or class)
@@ -124,46 +123,46 @@
 \code{unknown_entityref(\var{ref})}.  The default \member{entitydefs}
 defines translations for \code{\&amp;}, \code{\&apos}, \code{\&gt;},
 \code{\&lt;}, and \code{\&quot;}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_comment}{comment}
+\begin{methoddesc}{handle_comment}{comment}
 This method is called when a comment is encountered.  The
 \var{comment} argument is a string containing the text between the
 \samp{<!--} and \samp{-->} delimiters, but not the delimiters
 themselves.  For example, the comment \samp{<!--text-->} will
 cause this method to be called with the argument \code{'text'}.  The
 default method does nothing.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{report_unbalanced}{tag}
+\begin{methoddesc}{report_unbalanced}{tag}
 This method is called when an end tag is found which does not
 correspond to any open element.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{unknown_starttag}{tag, attributes}
+\begin{methoddesc}{unknown_starttag}{tag, attributes}
 This method is called to process an unknown start tag.  It is intended
 to be overridden by a derived class; the base class implementation
 does nothing.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{unknown_endtag}{tag}
+\begin{methoddesc}{unknown_endtag}{tag}
 This method is called to process an unknown end tag.  It is intended
 to be overridden by a derived class; the base class implementation
 does nothing.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{unknown_charref}{ref}
+\begin{methoddesc}{unknown_charref}{ref}
 This method is called to process unresolvable numeric character
 references.  Refer to \method{handle_charref()} to determine what is
 handled by default.  It is intended to be overridden by a derived
 class; the base class implementation does nothing.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{unknown_entityref}{ref}
+\begin{methoddesc}{unknown_entityref}{ref}
 This method is called to process an unknown entity reference.  It is
 intended to be overridden by a derived class; the base class
 implementation does nothing.
-\end{funcdesc}
+\end{methoddesc}
 
 Apart from overriding or extending the methods listed above, derived
 classes may also define methods of the following form to define
@@ -171,22 +170,22 @@
 independent; the \var{tag} occurring in method names must be in lower
 case:
 
-\begin{funcdescni}{start_\var{tag}}{attributes}
+\begin{methoddescni}{start_\var{tag}}{attributes}
 This method is called to process an opening tag \var{tag}.  It has
 preference over \code{do_\var{tag}()}.  The \var{attributes}
 argument has the same meaning as described for
 \method{handle_starttag()} above.
-\end{funcdescni}
+\end{methoddescni}
 
-\begin{funcdescni}{do_\var{tag}}{attributes}
+\begin{methoddescni}{do_\var{tag}}{attributes}
 This method is called to process an opening tag \var{tag} that does
 not come with a matching closing tag.  The \var{attributes} argument
 has the same meaning as described for \method{handle_starttag()} above.
-\end{funcdescni}
+\end{methoddescni}
 
-\begin{funcdescni}{end_\var{tag}}{}
+\begin{methoddescni}{end_\var{tag}}{}
 This method is called to process a closing tag \var{tag}.
-\end{funcdescni}
+\end{methoddescni}
 
 Note that the parser maintains a stack of open elements for which no
 end tag has been found yet.  Only tags processed by
diff --git a/Doc/lib/libstrio.tex b/Doc/lib/libstrio.tex
index 26fdda1..cf96dbb 100644
--- a/Doc/lib/libstrio.tex
+++ b/Doc/lib/libstrio.tex
@@ -3,15 +3,21 @@
 
 \stmodindex{StringIO}
 
-This module implements a file-like class, \code{StringIO},
+This module implements a file-like class, \class{StringIO},
 that reads and writes a string buffer (also known as \emph{memory
 files}). See the description on file objects for operations.
 
-When a \code{StringIO} object is created, it can be initialized
+\begin{classdesc}{StringIO}{\optional{buffer}}
+When a \class{StringIO} object is created, it can be initialized
 to an existing string by passing the string to the constructor.
-If no string is given, the \code{StringIO} will start empty.
+If no string is given, the \class{StringIO} will start empty.
+\end{classdesc}
 
-The method \code{getvalue()} can be called to retrieve the entire
-contents of the ``file'' at any time before the \code{StringIO}
-object's \code{close()} method is called.  Calling \code{close()} will
-free the memory buffer.
+\begin{methoddesc}{getvalue}{}
+Retrieve the entire contents of the ``file'' at any time before the
+\class{StringIO} object's \method{close()} method is called.
+\end{methoddesc}
+
+\begin{methoddesc}{close}{}
+Free the memory buffer.
+\end{methoddesc}
diff --git a/Doc/lib/libtypes.tex b/Doc/lib/libtypes.tex
index 70f970e..e8f7cad 100644
--- a/Doc/lib/libtypes.tex
+++ b/Doc/lib/libtypes.tex
@@ -707,30 +707,28 @@
 Files have the following methods:
 
 
-\setindexsubitem{(file method)}
-
-\begin{funcdesc}{close}{}
+\begin{methoddesc}[file]{close}{}
   Close the file.  A closed file cannot be read or written anymore.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{flush}{}
+\begin{methoddesc}[file]{flush}{}
   Flush the internal buffer, like \code{stdio}'s \code{fflush()}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{isatty}{}
+\begin{methoddesc}[file]{isatty}{}
   Return \code{1} if the file is connected to a tty(-like) device, else
   \code{0}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{fileno}{}
+\begin{methoddesc}[file]{fileno}{}
 Return the integer ``file descriptor'' that is used by the underlying
 implementation to request I/O operations from the operating system.
 This can be useful for other, lower level interfaces that use file
 descriptors, e.g. module \code{fcntl} or \code{os.read()} and friends.
 \refbimodindex{fcntl}
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{read}{\optional{size}}
+\begin{methoddesc}[file]{read}{\optional{size}}
   Read at most \var{size} bytes from the file (less if the read hits
   \EOF{} or no more data is immediately available on a pipe, tty or
   similar device).  If the \var{size} argument is negative or omitted,
@@ -738,9 +736,9 @@
   object.  An empty string is returned when \EOF{} is encountered
   immediately.  (For certain files, like ttys, it makes sense to
   continue reading after an \EOF{} is hit.)
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{readline}{\optional{size}}
+\begin{methoddesc}[file]{readline}{\optional{size}}
   Read one entire line from the file.  A trailing newline character is
   kept in the string%
 \footnote{The advantage of leaving the newline on is that an empty string 
@@ -757,71 +755,71 @@
   immediately.  Note: unlike \code{stdio}'s \code{fgets()}, the returned
   string contains null characters (\code{'\e 0'}) if they occurred in the
   input.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{readlines}{\optional{sizehint}}
+\begin{methoddesc}[file]{readlines}{\optional{sizehint}}
   Read until \EOF{} using \code{readline()} and return a list containing
   the lines thus read.  If the optional \var{sizehint} argument is
   present, instead of reading up to \EOF{}, whole lines totalling
   approximately \var{sizehint} bytes (possibly after rounding up to an
   internal buffer size) are read.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{seek}{offset, whence}
+\begin{methoddesc}[file]{seek}{offset, whence}
   Set the file's current position, like \code{stdio}'s \code{fseek()}.
   The \var{whence} argument is optional and defaults to \code{0}
   (absolute file positioning); other values are \code{1} (seek
   relative to the current position) and \code{2} (seek relative to the
   file's end).  There is no return value.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{tell}{}
+\begin{methoddesc}[file]{tell}{}
   Return the file's current position, like \code{stdio}'s \code{ftell()}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{truncate}{\optional{size}}
+\begin{methoddesc}[file]{truncate}{\optional{size}}
 Truncate the file's size.  If the optional size argument present, the
 file is truncated to (at most) that size.  The size defaults to the
 current position.  Availability of this function depends on the
 operating system version (e.g., not all \UNIX{} versions support this
 operation).
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{write}{str}
+\begin{methoddesc}[file]{write}{str}
 Write a string to the file.  There is no return value.  Note: due to
 buffering, the string may not actually show up in the file until
 the \code{flush()} or \code{close()} method is called.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{writelines}{list}
+\begin{methoddesc}[file]{writelines}{list}
 Write a list of strings to the file.  There is no return value.
 (The name is intended to match \code{readlines}; \code{writelines}
 does not add line separators.)
-\end{funcdesc}
+\end{methoddesc}
 
 File objects also offer the following attributes:
 
 \setindexsubitem{(file attribute)}
 
-\begin{datadesc}{closed}
+\begin{memberdesc}[file]{closed}
 Boolean indicating the current state of the file object.  This is a
 read-only attribute; the \method{close()} method changes the value.
-\end{datadesc}
+\end{memberdesc}
 
-\begin{datadesc}{mode}
+\begin{memberdesc}[file]{mode}
 The I/O mode for the file.  If the file was created using the
 \function{open()} built-in function, this will be the value of the
 \var{mode} parameter.  This is a read-only attribute.
-\end{datadesc}
+\end{memberdesc}
 
-\begin{datadesc}{name}
+\begin{memberdesc}[file]{name}
 If the file object was created using \function{open()}, the name of
 the file.  Otherwise, some string that indicates the source of the
 file object, of the form \samp{<\mbox{\ldots}>}.  This is a read-only
 attribute.
-\end{datadesc}
+\end{memberdesc}
 
-\begin{datadesc}{softspace}
+\begin{memberdesc}[file]{softspace}
 Boolean that indicates whether a space character needs to be printed
 before another value when using the \keyword{print} statement.
 Classes that are trying to simulate a file object should also have a
@@ -829,7 +827,7 @@
 zero.  This will be automatic for classes implemented in Python; types
 implemented in \C{} will have to provide a writable \code{softspace}
 attribute.
-\end{datadesc}
+\end{memberdesc}
 
 \subsubsection{Internal Objects}
 
diff --git a/Doc/libformatter.tex b/Doc/libformatter.tex
index 5d06995..4440815 100644
--- a/Doc/libformatter.tex
+++ b/Doc/libformatter.tex
@@ -37,6 +37,7 @@
 
 One data element is defined at the module level:
 
+
 \begin{datadesc}{AS_IS}
 Value which can be used in the font specification passed to the
 \code{push_font()} method described below, or as the new value to any
@@ -47,33 +48,30 @@
 
 The following attributes are defined for formatter instance objects:
 
-\setindexsubitem{(formatter attribute)}
 
-\begin{datadesc}{writer}
+\begin{memberdesc}[formatter]{writer}
 The writer instance with which the formatter interacts.
-\end{datadesc}
+\end{memberdesc}
 
 
-\setindexsubitem{(formatter method)}
-
-\begin{funcdesc}{end_paragraph}{blanklines}
+\begin{methoddesc}[formatter]{end_paragraph}{blanklines}
 Close any open paragraphs and insert at least \var{blanklines}
 before the next paragraph.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{add_line_break}{}
+\begin{methoddesc}[formatter]{add_line_break}{}
 Add a hard line break if one does not already exist.  This does not
 break the logical paragraph.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{add_hor_rule}{*args, **kw}
+\begin{methoddesc}[formatter]{add_hor_rule}{*args, **kw}
 Insert a horizontal rule in the output.  A hard break is inserted if
 there is data in the current paragraph, but the logical paragraph is
 not broken.  The arguments and keywords are passed on to the writer's
 \method{send_line_break()} method.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{add_flowing_data}{data}
+\begin{methoddesc}[formatter]{add_flowing_data}{data}
 Provide data which should be formatted with collapsed whitespaces.
 Whitespace from preceeding and successive calls to
 \method{add_flowing_data()} is considered as well when the whitespace
@@ -81,15 +79,15 @@
 expected to be word-wrapped by the output device.  Note that any
 word-wrapping still must be performed by the writer object due to the
 need to rely on device and font information.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{add_literal_data}{data}
+\begin{methoddesc}[formatter]{add_literal_data}{data}
 Provide data which should be passed to the writer unchanged.
 Whitespace, including newline and tab characters, are considered legal
 in the value of \var{data}.  
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{add_label_data}{format, counter}
+\begin{methoddesc}[formatter]{add_label_data}{format, counter}
 Insert a label which should be placed to the left of the current left
 margin.  This should be used for constructing bulleted or numbered
 lists.  If the \var{format} value is a string, it is interpreted as a
@@ -111,74 +109,74 @@
 represent the counter value in Roman numerals, in upper and lower
 case.  Note that the alphabetic and roman transforms require that the
 counter value be greater than zero.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{flush_softspace}{}
+\begin{methoddesc}[formatter]{flush_softspace}{}
 Send any pending whitespace buffered from a previous call to
 \method{add_flowing_data()} to the associated writer object.  This
 should be called before any direct manipulation of the writer object.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{push_alignment}{align}
+\begin{methoddesc}[formatter]{push_alignment}{align}
 Push a new alignment setting onto the alignment stack.  This may be
 \constant{AS_IS} if no change is desired.  If the alignment value is
 changed from the previous setting, the writer's \method{new_alignment()}
 method is called with the \var{align} value.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{pop_alignment}{}
+\begin{methoddesc}[formatter]{pop_alignment}{}
 Restore the previous alignment.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{push_font}{\code{(}size, italic, bold, teletype\code{)}}
+\begin{methoddesc}[formatter]{push_font}{\code{(}size, italic, bold, teletype\code{)}}
 Change some or all font properties of the writer object.  Properties
 which are not set to \constant{AS_IS} are set to the values passed in
 while others are maintained at their current settings.  The writer's
 \method{new_font()} method is called with the fully resolved font
 specification.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{pop_font}{}
+\begin{methoddesc}[formatter]{pop_font}{}
 Restore the previous font.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{push_margin}{margin}
+\begin{methoddesc}[formatter]{push_margin}{margin}
 Increase the number of left margin indentations by one, associating
 the logical tag \var{margin} with the new indentation.  The initial
 margin level is \code{0}.  Changed values of the logical tag must be
 true values; false values other than \constant{AS_IS} are not
 sufficient to change the margin.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{pop_margin}{}
+\begin{methoddesc}[formatter]{pop_margin}{}
 Restore the previous margin.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{push_style}{*styles}
+\begin{methoddesc}[formatter]{push_style}{*styles}
 Push any number of arbitrary style specifications.  All styles are
 pushed onto the styles stack in order.  A tuple representing the
 entire stack, including \constant{AS_IS} values, is passed to the
 writer's \method{new_styles()} method.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{pop_style}{\optional{n\code{ = 1}}}
+\begin{methoddesc}[formatter]{pop_style}{\optional{n\code{ = 1}}}
 Pop the last \var{n} style specifications passed to
 \method{push_style()}.  A tuple representing the revised stack,
 including \constant{AS_IS} values, is passed to the writer's
 \method{new_styles()} method.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{set_spacing}{spacing}
+\begin{methoddesc}[formatter]{set_spacing}{spacing}
 Set the spacing style for the writer.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{assert_line_data}{\optional{flag\code{ = 1}}}
+\begin{methoddesc}[formatter]{assert_line_data}{\optional{flag\code{ = 1}}}
 Inform the formatter that data has been added to the current paragraph
 out-of-band.  This should be used when the writer has been manipulated
 directly.  The optional \var{flag} argument can be set to false if
 the writer manipulations produced a hard line break at the end of the
 output.
-\end{funcdesc}
+\end{methoddesc}
 
 
 \subsection{Formatter Implementations}
@@ -213,21 +211,20 @@
 \class{AbstractFormatter} class as a formatter, the writer must
 typically be provided by the application.
 
-\setindexsubitem{(writer method)}
 
-\begin{funcdesc}{flush}{}
+\begin{methoddesc}[writer]{flush}{}
 Flush any buffered output or device control events.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{new_alignment}{align}
+\begin{methoddesc}[writer]{new_alignment}{align}
 Set the alignment style.  The \var{align} value can be any object,
 but by convention is a string or \code{None}, where \code{None}
 indicates that the writer's ``preferred'' alignment should be used.
 Conventional \var{align} values are \code{'left'}, \code{'center'},
 \code{'right'}, and \code{'justify'}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{new_font}{font}
+\begin{methoddesc}[writer]{new_font}{font}
 Set the font style.  The value of \var{font} will be \code{None},
 indicating that the device's default font should be used, or a tuple
 of the form \code{(}\var{size}, \var{italic}, \var{bold},
@@ -236,67 +233,67 @@
 must be defined by the application.  The \var{italic}, \var{bold}, and
 \var{teletype} values are boolean indicators specifying which of those
 font attributes should be used.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{new_margin}{margin, level}
+\begin{methoddesc}[writer]{new_margin}{margin, level}
 Set the margin level to the integer \var{level} and the logical tag
 to \var{margin}.  Interpretation of the logical tag is at the
 writer's discretion; the only restriction on the value of the logical
 tag is that it not be a false value for non-zero values of
 \var{level}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{new_spacing}{spacing}
+\begin{methoddesc}[writer]{new_spacing}{spacing}
 Set the spacing style to \var{spacing}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{new_styles}{styles}
+\begin{methoddesc}[writer]{new_styles}{styles}
 Set additional styles.  The \var{styles} value is a tuple of
 arbitrary values; the value \constant{AS_IS} should be ignored.  The
 \var{styles} tuple may be interpreted either as a set or as a stack
 depending on the requirements of the application and writer
 implementation.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_line_break}{}
+\begin{methoddesc}[writer]{send_line_break}{}
 Break the current line.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_paragraph}{blankline}
+\begin{methoddesc}[writer]{send_paragraph}{blankline}
 Produce a paragraph separation of at least \var{blankline} blank
 lines, or the equivelent.  The \var{blankline} value will be an
 integer.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_hor_rule}{*args, **kw}
+\begin{methoddesc}[writer]{send_hor_rule}{*args, **kw}
 Display a horizontal rule on the output device.  The arguments to this
 method are entirely application- and writer-specific, and should be
 interpreted with care.  The method implementation may assume that a
 line break has already been issued via \method{send_line_break()}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_flowing_data}{data}
+\begin{methoddesc}[writer]{send_flowing_data}{data}
 Output character data which may be word-wrapped and re-flowed as
 needed.  Within any sequence of calls to this method, the writer may
 assume that spans of multiple whitespace characters have been
 collapsed to single space characters.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_literal_data}{data}
+\begin{methoddesc}[writer]{send_literal_data}{data}
 Output character data which has already been formatted
 for display.  Generally, this should be interpreted to mean that line
 breaks indicated by newline characters should be preserved and no new
 line breaks should be introduced.  The data may contain embedded
 newline and tab characters, unlike data provided to the
 \method{send_formatted_data()} interface.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{send_label_data}{data}
+\begin{methoddesc}[writer]{send_label_data}{data}
 Set \var{data} to the left of the current left margin, if possible.
 The value of \var{data} is not restricted; treatment of non-string
 values is entirely application- and writer-dependent.  This method
 will only be called at the beginning of a line.
-\end{funcdesc}
+\end{methoddesc}
 
 
 \subsection{Writer Implementations}
diff --git a/Doc/libhtmllib.tex b/Doc/libhtmllib.tex
index dff837c..7737845 100644
--- a/Doc/libhtmllib.tex
+++ b/Doc/libhtmllib.tex
@@ -70,53 +70,50 @@
 In addition to tag methods, the \class{HTMLParser} class provides some
 additional methods and instance variables for use within tag methods.
 
-\setindexsubitem{(HTMLParser attribute)}
-
-\begin{datadesc}{formatter}
+\begin{memberdesc}{formatter}
 This is the formatter instance associated with the parser.
-\end{datadesc}
+\end{memberdesc}
 
-\begin{datadesc}{nofill}
+\begin{memberdesc}{nofill}
 Boolean flag which should be true when whitespace should not be
 collapsed, or false when it should be.  In general, this should only
 be true when character data is to be treated as ``preformatted'' text,
 as within a \code{<PRE>} element.  The default value is false.  This
 affects the operation of \method{handle_data()} and \method{save_end()}.
-\end{datadesc}
+\end{memberdesc}
 
-\setindexsubitem{(HTMLParser method)}
 
-\begin{funcdesc}{anchor_bgn}{href, name, type}
+\begin{methoddesc}{anchor_bgn}{href, name, type}
 This method is called at the start of an anchor region.  The arguments
 correspond to the attributes of the \code{<A>} tag with the same
 names.  The default implementation maintains a list of hyperlinks
 (defined by the \code{href} attribute) within the document.  The list
 of hyperlinks is available as the data attribute \code{anchorlist}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{anchor_end}{}
+\begin{methoddesc}{anchor_end}{}
 This method is called at the end of an anchor region.  The default
 implementation adds a textual footnote marker using an index into the
 list of hyperlinks created by \method{anchor_bgn()}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_image}{source, alt\optional{, ismap\optional{, align\optional{, width\optional{, height}}}}}
+\begin{methoddesc}{handle_image}{source, alt\optional{, ismap\optional{, align\optional{, width\optional{, height}}}}}
 This method is called to handle images.  The default implementation
 simply passes the \var{alt} value to the \method{handle_data()}
 method.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{save_bgn}{}
+\begin{methoddesc}{save_bgn}{}
 Begins saving character data in a buffer instead of sending it to the
 formatter object.  Retrieve the stored data via \method{save_end()}.
 Use of the \method{save_bgn()} / \method{save_end()} pair may not be
 nested.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{save_end}{}
+\begin{methoddesc}{save_end}{}
 Ends buffering character data and returns all data saved since the
 preceeding call to \method{save_bgn()}.  If the \code{nofill} flag is
 false, whitespace is collapsed to single spaces.  A call to this
 method without a preceeding call to \method{save_bgn()} will raise a
 \exception{TypeError} exception.
-\end{funcdesc}
+\end{methoddesc}
diff --git a/Doc/libpprint.tex b/Doc/libpprint.tex
index 6f03431..8062576 100644
--- a/Doc/libpprint.tex
+++ b/Doc/libpprint.tex
@@ -142,32 +142,31 @@
 
 \class{PrettyPrinter} instances have the following methods:
 
-\setindexsubitem{(PrettyPrinter method)}
 
-\begin{funcdesc}{pformat}{object}
+\begin{methoddesc}{pformat}{object}
 Return the formatted representation of \var{object}.  This takes into
-account the options passed to the \class{PrettyPrinter} constructor.
-\end{funcdesc}
+Account the options passed to the \class{PrettyPrinter} constructor.
+\end{methoddesc}
 
-\begin{funcdesc}{pprint}{object}
+\begin{methoddesc}{pprint}{object}
 Print the formatted representation of \var{object} on the configured
 stream, followed by a newline.
-\end{funcdesc}
+\end{methoddesc}
 
 The following methods provide the implementations for the
 corresponding functions of the same names.  Using these methods on an
 instance is slightly more efficient since new \class{PrettyPrinter}
 objects don't need to be created.
 
-\begin{funcdesc}{isreadable}{object}
+\begin{methoddesc}{isreadable}{object}
 Determine if the formatted representation of the object is
 ``readable,'' or can be used to reconstruct the value using
 \function{eval()}\bifuncindex{eval}.  Note that this returns false for
 recursive objects.  If the \var{depth} parameter of the
 \class{PrettyPrinter} is set and the object is deeper than allowed,
 this returns false.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{isrecursive}{object}
+\begin{methoddesc}{isrecursive}{object}
 Determine if the object requires a recursive representation.
-\end{funcdesc}
+\end{methoddesc}
diff --git a/Doc/libprofile.tex b/Doc/libprofile.tex
index cdf8c4e..b7a1c1e 100644
--- a/Doc/libprofile.tex
+++ b/Doc/libprofile.tex
@@ -1,7 +1,5 @@
 \chapter{The Python Profiler}
 \label{profile}
-\stmodindex{profile}
-\stmodindex{pstats}
 
 Copyright \copyright{} 1994, by InfoSeek Corporation, all rights reserved.
 
@@ -256,8 +254,9 @@
 
 
 \section{Reference Manual}
+\stmodindex{profile}
+\label{module-profile}
 
-\setindexsubitem{(in module profile)}
 
 The primary entry point for the profiler is the global function
 \function{profile.run()}.  It is typically used to create any profile
@@ -269,7 +268,7 @@
 ``better'' profilers from the classes presented, or reading the source
 code for these modules.
 
-\begin{funcdesc}{profile.run}{string\optional{, filename\optional{, ...}}}
+\begin{funcdesc}{run}{string\optional{, filename\optional{, ...}}}
 
 This function takes a single argument that has can be passed to the
 \keyword{exec} statement, and an optional file name.  In all cases this
@@ -336,7 +335,8 @@
 Analysis of the profiler data is done using this class from the
 \module{pstats} module:
 
-\setindexsubitem{(in module pstats)}
+% now switch modules....
+\stmodindex{pstats}
 
 \begin{classdesc}{Stats}{filename\optional{, ...}}
 This class constructor creates an instance of a ``statistics object''
@@ -361,7 +361,7 @@
 
 \setindexsubitem{(Stats method)}
 
-\begin{funcdesc}{strip_dirs}{}
+\begin{methoddesc}{strip_dirs}{}
 This method for the \class{Stats} class removes all leading path
 information from file names.  It is very useful in reducing the size
 of the printout to fit within (close to) 80 columns.  This method
@@ -372,19 +372,19 @@
 function names to be indistinguishable (i.e., they are on the same
 line of the same filename, and have the same function name), then the
 statistics for these two entries are accumulated into a single entry.
-\end{funcdesc}
+\end{methoddesc}
 
 
-\begin{funcdesc}{add}{filename\optional{, ...}}
+\begin{methoddesc}{add}{filename\optional{, ...}}
 This method of the \class{Stats} class accumulates additional
 profiling information into the current profiling object.  Its
 arguments should refer to filenames created by the corresponding
 version of \function{profile.run()}.  Statistics for identically named
 (re: file, line, name) functions are automatically accumulated into
 single function statistics.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{sort_stats}{key\optional{, ...}}
+\begin{methoddesc}{sort_stats}{key\optional{, ...}}
 This method modifies the \class{Stats} object by sorting it according
 to the supplied criteria.  The argument is typically a string
 identifying the basis of a sort (example: \code{"time"} or
@@ -430,18 +430,18 @@
 \code{"cumulative"} respectively.  If this old style format (numeric)
 is used, only one sort key (the numeric key) will be used, and
 additional arguments will be silently ignored.
-\end{funcdesc}
+\end{methoddesc}
 
 
-\begin{funcdesc}{reverse_order}{}
+\begin{methoddesc}{reverse_order}{}
 This method for the \class{Stats} class reverses the ordering of the basic
 list within the object.  This method is provided primarily for
 compatibility with the old profiler.  Its utility is questionable
 now that ascending vs descending order is properly selected based on
 the sort key of choice.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{print_stats}{restriction\optional{, ...}}
+\begin{methoddesc}{print_stats}{restriction\optional{, ...}}
 This method for the \class{Stats} class prints out a report as described
 in the \function{profile.run()} definition.
 
@@ -473,10 +473,10 @@
 
 would limit the list to all functions having file names \samp{.*foo:},
 and then proceed to only print the first 10\% of them.
-\end{funcdesc}
+\end{methoddesc}
 
 
-\begin{funcdesc}{print_callers}{restrictions\optional{, ...}}
+\begin{methoddesc}{print_callers}{restrictions\optional{, ...}}
 This method for the \class{Stats} class prints a list of all functions
 that called each function in the profiled database.  The ordering is
 identical to that provided by \method{print_stats()}, and the definition
@@ -484,16 +484,16 @@
 number is shown in parentheses after each caller to show how many
 times this specific call was made.  A second non-parenthesized number
 is the cumulative time spent in the function at the right.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{print_callees}{restrictions\optional{, ...}}
+\begin{methoddesc}{print_callees}{restrictions\optional{, ...}}
 This method for the \class{Stats} class prints a list of all function
 that were called by the indicated function.  Aside from this reversal
 of direction of calls (re: called vs was called by), the arguments and
 ordering are identical to the \method{print_callers()} method.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{ignore}{}
+\begin{methoddesc}{ignore}{}
 This method of the \class{Stats} class is used to dispose of the value
 returned by earlier methods.  All standard methods in this class
 return the instance that is being processed, so that the commands can
@@ -503,7 +503,7 @@
 pstats.Stats('foofile').strip_dirs().sort_stats('cum') \
                        .print_stats().ignore()
 \end{verbatim}
-%
+
 would perform all the indicated functions, but it would not return
 the final reference to the \class{Stats} instance.%
 \footnote{
@@ -511,7 +511,7 @@
 result that was not \code{None}.  The method is still defined for
 backward compatibility.
 }
-\end{funcdesc}
+\end{methoddesc}
 
 
 \section{Limitations}
diff --git a/Doc/libqueue.tex b/Doc/libqueue.tex
index 562623a..db6cabc 100644
--- a/Doc/libqueue.tex
+++ b/Doc/libqueue.tex
@@ -37,34 +37,32 @@
 is not described here.  See the source code for details.  The public
 methods are:
 
-\setindexsubitem{(Queue method)}
-
-\begin{funcdesc}{qsize}{}
+\begin{methoddesc}{qsize}{}
 Returns the approximate size of the queue.  Because of multithreading
 semantics, this number is not reliable.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{empty}{}
+\begin{methoddesc}{empty}{}
 Returns \code{1} if the queue is empty, \code{0} otherwise.  Because
 of multithreading semantics, this is not reliable.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{full}{}
+\begin{methoddesc}{full}{}
 Returns \code{1} if the queue is full, \code{0} otherwise.  Because of
 multithreading semantics, this is not reliable.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{put}{item}
+\begin{methoddesc}{put}{item}
 Puts \var{item} into the queue.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{get}{}
+\begin{methoddesc}{get}{}
 Gets and returns an item from the queue, blocking if necessary until
 one is available.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{get_nowait}{}
+\begin{methoddesc}{get_nowait}{}
 Gets and returns an item from the queue if one is immediately
 available.  Raises an \exception{Empty} exception if the queue is
 empty or if the queue's emptiness cannot be determined.
-\end{funcdesc}
+\end{methoddesc}
diff --git a/Doc/libsgmllib.tex b/Doc/libsgmllib.tex
index f93095b..f86e729 100644
--- a/Doc/libsgmllib.tex
+++ b/Doc/libsgmllib.tex
@@ -38,37 +38,36 @@
 
 \class{SGMLParser} instances have the following interface methods:
 
-\setindexsubitem{(SGMLParser method)}
 
-\begin{funcdesc}{reset}{}
+\begin{methoddesc}{reset}{}
 Reset the instance.  Loses all unprocessed data.  This is called
 implicitly at instantiation time.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{setnomoretags}{}
+\begin{methoddesc}{setnomoretags}{}
 Stop processing tags.  Treat all following input as literal input
 (CDATA).  (This is only provided so the HTML tag \code{<PLAINTEXT>}
 can be implemented.)
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{setliteral}{}
+\begin{methoddesc}{setliteral}{}
 Enter literal mode (CDATA mode).
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{feed}{data}
+\begin{methoddesc}{feed}{data}
 Feed some text to the parser.  It is processed insofar as it consists
 of complete elements; incomplete data is buffered until more data is
 fed or \method{close()} is called.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{close}{}
+\begin{methoddesc}{close}{}
 Force processing of all buffered data as if it were followed by an
 end-of-file mark.  This method may be redefined by a derived class to
 define additional processing at the end of the input, but the
 redefined version should always call \method{close()}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_starttag}{tag, method, attributes}
+\begin{methoddesc}{handle_starttag}{tag, method, attributes}
 This method is called to handle start tags for which either a
 \code{start_\var{tag}()} or \code{do_\var{tag}()} method has been
 defined.  The \var{tag} argument is the name of the tag converted to
@@ -82,9 +81,9 @@
 method would be called as \samp{unknown_starttag('a', [('href',
 'http://www.cwi.nl/')])}.  The base implementation simply calls
 \var{method} with \var{attributes} as the only argument.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_endtag}{tag, method}
+\begin{methoddesc}{handle_endtag}{tag, method}
 This method is called to handle endtags for which an
 \code{end_\var{tag}()} method has been defined.  The \var{tag}
 argument is the name of the tag converted to lower case, and the
@@ -93,15 +92,15 @@
 \code{end_\var{tag}()} method is defined for the closing element,
 this handler is not called.  The base implementation simply calls
 \var{method}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_data}{data}
+\begin{methoddesc}{handle_data}{data}
 This method is called to process arbitrary data.  It is intended to be
 overridden by a derived class; the base class implementation does
 nothing.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_charref}{ref}
+\begin{methoddesc}{handle_charref}{ref}
 This method is called to process a character reference of the form
 \samp{\&\#\var{ref};}.  In the base implementation, \var{ref} must
 be a decimal number in the
@@ -111,9 +110,9 @@
 \code{unknown_charref(\var{ref})} is called to handle the error.  A
 subclass must override this method to provide support for named
 character entities.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_entityref}{ref}
+\begin{methoddesc}{handle_entityref}{ref}
 This method is called to process a general entity reference of the
 form \samp{\&\var{ref};} where \var{ref} is an general entity
 reference.  It looks for \var{ref} in the instance (or class)
@@ -124,46 +123,46 @@
 \code{unknown_entityref(\var{ref})}.  The default \member{entitydefs}
 defines translations for \code{\&amp;}, \code{\&apos}, \code{\&gt;},
 \code{\&lt;}, and \code{\&quot;}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{handle_comment}{comment}
+\begin{methoddesc}{handle_comment}{comment}
 This method is called when a comment is encountered.  The
 \var{comment} argument is a string containing the text between the
 \samp{<!--} and \samp{-->} delimiters, but not the delimiters
 themselves.  For example, the comment \samp{<!--text-->} will
 cause this method to be called with the argument \code{'text'}.  The
 default method does nothing.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{report_unbalanced}{tag}
+\begin{methoddesc}{report_unbalanced}{tag}
 This method is called when an end tag is found which does not
 correspond to any open element.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{unknown_starttag}{tag, attributes}
+\begin{methoddesc}{unknown_starttag}{tag, attributes}
 This method is called to process an unknown start tag.  It is intended
 to be overridden by a derived class; the base class implementation
 does nothing.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{unknown_endtag}{tag}
+\begin{methoddesc}{unknown_endtag}{tag}
 This method is called to process an unknown end tag.  It is intended
 to be overridden by a derived class; the base class implementation
 does nothing.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{unknown_charref}{ref}
+\begin{methoddesc}{unknown_charref}{ref}
 This method is called to process unresolvable numeric character
 references.  Refer to \method{handle_charref()} to determine what is
 handled by default.  It is intended to be overridden by a derived
 class; the base class implementation does nothing.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{unknown_entityref}{ref}
+\begin{methoddesc}{unknown_entityref}{ref}
 This method is called to process an unknown entity reference.  It is
 intended to be overridden by a derived class; the base class
 implementation does nothing.
-\end{funcdesc}
+\end{methoddesc}
 
 Apart from overriding or extending the methods listed above, derived
 classes may also define methods of the following form to define
@@ -171,22 +170,22 @@
 independent; the \var{tag} occurring in method names must be in lower
 case:
 
-\begin{funcdescni}{start_\var{tag}}{attributes}
+\begin{methoddescni}{start_\var{tag}}{attributes}
 This method is called to process an opening tag \var{tag}.  It has
 preference over \code{do_\var{tag}()}.  The \var{attributes}
 argument has the same meaning as described for
 \method{handle_starttag()} above.
-\end{funcdescni}
+\end{methoddescni}
 
-\begin{funcdescni}{do_\var{tag}}{attributes}
+\begin{methoddescni}{do_\var{tag}}{attributes}
 This method is called to process an opening tag \var{tag} that does
 not come with a matching closing tag.  The \var{attributes} argument
 has the same meaning as described for \method{handle_starttag()} above.
-\end{funcdescni}
+\end{methoddescni}
 
-\begin{funcdescni}{end_\var{tag}}{}
+\begin{methoddescni}{end_\var{tag}}{}
 This method is called to process a closing tag \var{tag}.
-\end{funcdescni}
+\end{methoddescni}
 
 Note that the parser maintains a stack of open elements for which no
 end tag has been found yet.  Only tags processed by
diff --git a/Doc/libstrio.tex b/Doc/libstrio.tex
index 26fdda1..cf96dbb 100644
--- a/Doc/libstrio.tex
+++ b/Doc/libstrio.tex
@@ -3,15 +3,21 @@
 
 \stmodindex{StringIO}
 
-This module implements a file-like class, \code{StringIO},
+This module implements a file-like class, \class{StringIO},
 that reads and writes a string buffer (also known as \emph{memory
 files}). See the description on file objects for operations.
 
-When a \code{StringIO} object is created, it can be initialized
+\begin{classdesc}{StringIO}{\optional{buffer}}
+When a \class{StringIO} object is created, it can be initialized
 to an existing string by passing the string to the constructor.
-If no string is given, the \code{StringIO} will start empty.
+If no string is given, the \class{StringIO} will start empty.
+\end{classdesc}
 
-The method \code{getvalue()} can be called to retrieve the entire
-contents of the ``file'' at any time before the \code{StringIO}
-object's \code{close()} method is called.  Calling \code{close()} will
-free the memory buffer.
+\begin{methoddesc}{getvalue}{}
+Retrieve the entire contents of the ``file'' at any time before the
+\class{StringIO} object's \method{close()} method is called.
+\end{methoddesc}
+
+\begin{methoddesc}{close}{}
+Free the memory buffer.
+\end{methoddesc}
diff --git a/Doc/libtypes.tex b/Doc/libtypes.tex
index 70f970e..e8f7cad 100644
--- a/Doc/libtypes.tex
+++ b/Doc/libtypes.tex
@@ -707,30 +707,28 @@
 Files have the following methods:
 
 
-\setindexsubitem{(file method)}
-
-\begin{funcdesc}{close}{}
+\begin{methoddesc}[file]{close}{}
   Close the file.  A closed file cannot be read or written anymore.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{flush}{}
+\begin{methoddesc}[file]{flush}{}
   Flush the internal buffer, like \code{stdio}'s \code{fflush()}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{isatty}{}
+\begin{methoddesc}[file]{isatty}{}
   Return \code{1} if the file is connected to a tty(-like) device, else
   \code{0}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{fileno}{}
+\begin{methoddesc}[file]{fileno}{}
 Return the integer ``file descriptor'' that is used by the underlying
 implementation to request I/O operations from the operating system.
 This can be useful for other, lower level interfaces that use file
 descriptors, e.g. module \code{fcntl} or \code{os.read()} and friends.
 \refbimodindex{fcntl}
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{read}{\optional{size}}
+\begin{methoddesc}[file]{read}{\optional{size}}
   Read at most \var{size} bytes from the file (less if the read hits
   \EOF{} or no more data is immediately available on a pipe, tty or
   similar device).  If the \var{size} argument is negative or omitted,
@@ -738,9 +736,9 @@
   object.  An empty string is returned when \EOF{} is encountered
   immediately.  (For certain files, like ttys, it makes sense to
   continue reading after an \EOF{} is hit.)
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{readline}{\optional{size}}
+\begin{methoddesc}[file]{readline}{\optional{size}}
   Read one entire line from the file.  A trailing newline character is
   kept in the string%
 \footnote{The advantage of leaving the newline on is that an empty string 
@@ -757,71 +755,71 @@
   immediately.  Note: unlike \code{stdio}'s \code{fgets()}, the returned
   string contains null characters (\code{'\e 0'}) if they occurred in the
   input.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{readlines}{\optional{sizehint}}
+\begin{methoddesc}[file]{readlines}{\optional{sizehint}}
   Read until \EOF{} using \code{readline()} and return a list containing
   the lines thus read.  If the optional \var{sizehint} argument is
   present, instead of reading up to \EOF{}, whole lines totalling
   approximately \var{sizehint} bytes (possibly after rounding up to an
   internal buffer size) are read.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{seek}{offset, whence}
+\begin{methoddesc}[file]{seek}{offset, whence}
   Set the file's current position, like \code{stdio}'s \code{fseek()}.
   The \var{whence} argument is optional and defaults to \code{0}
   (absolute file positioning); other values are \code{1} (seek
   relative to the current position) and \code{2} (seek relative to the
   file's end).  There is no return value.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{tell}{}
+\begin{methoddesc}[file]{tell}{}
   Return the file's current position, like \code{stdio}'s \code{ftell()}.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{truncate}{\optional{size}}
+\begin{methoddesc}[file]{truncate}{\optional{size}}
 Truncate the file's size.  If the optional size argument present, the
 file is truncated to (at most) that size.  The size defaults to the
 current position.  Availability of this function depends on the
 operating system version (e.g., not all \UNIX{} versions support this
 operation).
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{write}{str}
+\begin{methoddesc}[file]{write}{str}
 Write a string to the file.  There is no return value.  Note: due to
 buffering, the string may not actually show up in the file until
 the \code{flush()} or \code{close()} method is called.
-\end{funcdesc}
+\end{methoddesc}
 
-\begin{funcdesc}{writelines}{list}
+\begin{methoddesc}[file]{writelines}{list}
 Write a list of strings to the file.  There is no return value.
 (The name is intended to match \code{readlines}; \code{writelines}
 does not add line separators.)
-\end{funcdesc}
+\end{methoddesc}
 
 File objects also offer the following attributes:
 
 \setindexsubitem{(file attribute)}
 
-\begin{datadesc}{closed}
+\begin{memberdesc}[file]{closed}
 Boolean indicating the current state of the file object.  This is a
 read-only attribute; the \method{close()} method changes the value.
-\end{datadesc}
+\end{memberdesc}
 
-\begin{datadesc}{mode}
+\begin{memberdesc}[file]{mode}
 The I/O mode for the file.  If the file was created using the
 \function{open()} built-in function, this will be the value of the
 \var{mode} parameter.  This is a read-only attribute.
-\end{datadesc}
+\end{memberdesc}
 
-\begin{datadesc}{name}
+\begin{memberdesc}[file]{name}
 If the file object was created using \function{open()}, the name of
 the file.  Otherwise, some string that indicates the source of the
 file object, of the form \samp{<\mbox{\ldots}>}.  This is a read-only
 attribute.
-\end{datadesc}
+\end{memberdesc}
 
-\begin{datadesc}{softspace}
+\begin{memberdesc}[file]{softspace}
 Boolean that indicates whether a space character needs to be printed
 before another value when using the \keyword{print} statement.
 Classes that are trying to simulate a file object should also have a
@@ -829,7 +827,7 @@
 zero.  This will be automatic for classes implemented in Python; types
 implemented in \C{} will have to provide a writable \code{softspace}
 attribute.
-\end{datadesc}
+\end{memberdesc}
 
 \subsubsection{Internal Objects}