| #! /usr/bin/env python3 |
| |
| """ |
| Usage: |
| |
| python -m test [options] [test_name1 [test_name2 ...]] |
| python path/to/Lib/test/regrtest.py [options] [test_name1 [test_name2 ...]] |
| |
| |
| If no arguments or options are provided, finds all files matching |
| the pattern "test_*" in the Lib/test subdirectory and runs |
| them in alphabetical order (but see -M and -u, below, for exceptions). |
| |
| For more rigorous testing, it is useful to use the following |
| command line: |
| |
| python -E -Wd -m test [options] [test_name1 ...] |
| |
| |
| Options: |
| |
| -h/--help -- print this text and exit |
| --timeout TIMEOUT |
| -- dump the traceback and exit if a test takes more |
| than TIMEOUT seconds (default: 30 minutes); disable |
| the timeout if TIMEOUT is zero |
| --wait -- wait for user input, e.g., allow a debugger to be attached |
| |
| Verbosity |
| |
| -v/--verbose -- run tests in verbose mode with output to stdout |
| -w/--verbose2 -- re-run failed tests in verbose mode |
| -W/--verbose3 -- re-run failed tests in verbose mode immediately |
| -d/--debug -- print traceback for failed tests |
| -q/--quiet -- no output unless one or more tests fail |
| -S/--slow -- print the slowest 10 tests |
| --header -- print header with interpreter info |
| |
| Selecting tests |
| |
| -r/--random -- randomize test execution order (see below) |
| --randseed -- pass a random seed to reproduce a previous random run |
| -f/--fromfile -- read names of tests to run from a file (see below) |
| -x/--exclude -- arguments are tests to *exclude* |
| -s/--single -- single step through a set of tests (see below) |
| -u/--use RES1,RES2,... |
| -- specify which special resource intensive tests to run |
| -M/--memlimit LIMIT |
| -- run very large memory-consuming tests |
| --testdir DIR |
| -- execute test files in the specified directory (instead |
| of the Python stdlib test suite) |
| |
| Special runs |
| |
| -l/--findleaks -- if GC is available detect tests that leak memory |
| -L/--runleaks -- run the leaks(1) command just before exit |
| -R/--huntrleaks RUNCOUNTS |
| -- search for reference leaks (needs debug build, v. slow) |
| -j/--multiprocess PROCESSES |
| -- run PROCESSES processes at once |
| -T/--coverage -- turn on code coverage tracing using the trace module |
| -D/--coverdir DIRECTORY |
| -- Directory where coverage files are put |
| -N/--nocoverdir -- Put coverage files alongside modules |
| -t/--threshold THRESHOLD |
| -- call gc.set_threshold(THRESHOLD) |
| -n/--nowindows -- suppress error message boxes on Windows |
| -F/--forever -- run the specified tests in a loop, until an error happens |
| |
| |
| Additional Option Details: |
| |
| -r randomizes test execution order. You can use --randseed=int to provide a |
| int seed value for the randomizer; this is useful for reproducing troublesome |
| test orders. |
| |
| -s On the first invocation of regrtest using -s, the first test file found |
| or the first test file given on the command line is run, and the name of |
| the next test is recorded in a file named pynexttest. If run from the |
| Python build directory, pynexttest is located in the 'build' subdirectory, |
| otherwise it is located in tempfile.gettempdir(). On subsequent runs, |
| the test in pynexttest is run, and the next test is written to pynexttest. |
| When the last test has been run, pynexttest is deleted. In this way it |
| is possible to single step through the test files. This is useful when |
| doing memory analysis on the Python interpreter, which process tends to |
| consume too many resources to run the full regression test non-stop. |
| |
| -S is used to continue running tests after an aborted run. It will |
| maintain the order a standard run (ie, this assumes -r is not used). |
| This is useful after the tests have prematurely stopped for some external |
| reason and you want to start running from where you left off rather |
| than starting from the beginning. |
| |
| -f reads the names of tests from the file given as f's argument, one |
| or more test names per line. Whitespace is ignored. Blank lines and |
| lines beginning with '#' are ignored. This is especially useful for |
| whittling down failures involving interactions among tests. |
| |
| -L causes the leaks(1) command to be run just before exit if it exists. |
| leaks(1) is available on Mac OS X and presumably on some other |
| FreeBSD-derived systems. |
| |
| -R runs each test several times and examines sys.gettotalrefcount() to |
| see if the test appears to be leaking references. The argument should |
| be of the form stab:run:fname where 'stab' is the number of times the |
| test is run to let gettotalrefcount settle down, 'run' is the number |
| of times further it is run and 'fname' is the name of the file the |
| reports are written to. These parameters all have defaults (5, 4 and |
| "reflog.txt" respectively), and the minimal invocation is '-R :'. |
| |
| -M runs tests that require an exorbitant amount of memory. These tests |
| typically try to ascertain containers keep working when containing more than |
| 2 billion objects, which only works on 64-bit systems. There are also some |
| tests that try to exhaust the address space of the process, which only makes |
| sense on 32-bit systems with at least 2Gb of memory. The passed-in memlimit, |
| which is a string in the form of '2.5Gb', determines howmuch memory the |
| tests will limit themselves to (but they may go slightly over.) The number |
| shouldn't be more memory than the machine has (including swap memory). You |
| should also keep in mind that swap memory is generally much, much slower |
| than RAM, and setting memlimit to all available RAM or higher will heavily |
| tax the machine. On the other hand, it is no use running these tests with a |
| limit of less than 2.5Gb, and many require more than 20Gb. Tests that expect |
| to use more than memlimit memory will be skipped. The big-memory tests |
| generally run very, very long. |
| |
| -u is used to specify which special resource intensive tests to run, |
| such as those requiring large file support or network connectivity. |
| The argument is a comma-separated list of words indicating the |
| resources to test. Currently only the following are defined: |
| |
| all - Enable all special resources. |
| |
| audio - Tests that use the audio device. (There are known |
| cases of broken audio drivers that can crash Python or |
| even the Linux kernel.) |
| |
| curses - Tests that use curses and will modify the terminal's |
| state and output modes. |
| |
| largefile - It is okay to run some test that may create huge |
| files. These tests can take a long time and may |
| consume >2GB of disk space temporarily. |
| |
| network - It is okay to run tests that use external network |
| resource, e.g. testing SSL support for sockets. |
| |
| decimal - Test the decimal module against a large suite that |
| verifies compliance with standards. |
| |
| cpu - Used for certain CPU-heavy tests. |
| |
| subprocess Run all tests for the subprocess module. |
| |
| urlfetch - It is okay to download files required on testing. |
| |
| gui - Run tests that require a running GUI. |
| |
| To enable all resources except one, use '-uall,-<resource>'. For |
| example, to run all the tests except for the gui tests, give the |
| option '-uall,-gui'. |
| """ |
| |
| import builtins |
| import faulthandler |
| import getopt |
| import json |
| import os |
| import random |
| import re |
| import io |
| import sys |
| import time |
| import errno |
| import traceback |
| import warnings |
| import unittest |
| from inspect import isabstract |
| import tempfile |
| import platform |
| import sysconfig |
| import logging |
| |
| |
| # Some times __path__ and __file__ are not absolute (e.g. while running from |
| # Lib/) and, if we change the CWD to run the tests in a temporary dir, some |
| # imports might fail. This affects only the modules imported before os.chdir(). |
| # These modules are searched first in sys.path[0] (so '' -- the CWD) and if |
| # they are found in the CWD their __file__ and __path__ will be relative (this |
| # happens before the chdir). All the modules imported after the chdir, are |
| # not found in the CWD, and since the other paths in sys.path[1:] are absolute |
| # (site.py absolutize them), the __file__ and __path__ will be absolute too. |
| # Therefore it is necessary to absolutize manually the __file__ and __path__ of |
| # the packages to prevent later imports to fail when the CWD is different. |
| for module in sys.modules.values(): |
| if hasattr(module, '__path__'): |
| module.__path__ = [os.path.abspath(path) for path in module.__path__] |
| if hasattr(module, '__file__'): |
| module.__file__ = os.path.abspath(module.__file__) |
| |
| |
| # MacOSX (a.k.a. Darwin) has a default stack size that is too small |
| # for deeply recursive regular expressions. We see this as crashes in |
| # the Python test suite when running test_re.py and test_sre.py. The |
| # fix is to set the stack limit to 2048. |
| # This approach may also be useful for other Unixy platforms that |
| # suffer from small default stack limits. |
| if sys.platform == 'darwin': |
| try: |
| import resource |
| except ImportError: |
| pass |
| else: |
| soft, hard = resource.getrlimit(resource.RLIMIT_STACK) |
| newsoft = min(hard, max(soft, 1024*2048)) |
| resource.setrlimit(resource.RLIMIT_STACK, (newsoft, hard)) |
| |
| # Test result constants. |
| PASSED = 1 |
| FAILED = 0 |
| ENV_CHANGED = -1 |
| SKIPPED = -2 |
| RESOURCE_DENIED = -3 |
| INTERRUPTED = -4 |
| CHILD_ERROR = -5 # error in a child process |
| |
| from test import support |
| |
| RESOURCE_NAMES = ('audio', 'curses', 'largefile', 'network', |
| 'decimal', 'cpu', 'subprocess', 'urlfetch', 'gui') |
| |
| TEMPDIR = os.path.abspath(tempfile.gettempdir()) |
| |
| def usage(msg): |
| print(msg, file=sys.stderr) |
| print("Use --help for usage", file=sys.stderr) |
| sys.exit(2) |
| |
| |
| def main(tests=None, testdir=None, verbose=0, quiet=False, |
| exclude=False, single=False, randomize=False, fromfile=None, |
| findleaks=False, use_resources=None, trace=False, coverdir='coverage', |
| runleaks=False, huntrleaks=False, verbose2=False, print_slow=False, |
| random_seed=None, use_mp=None, verbose3=False, forever=False, |
| header=False): |
| """Execute a test suite. |
| |
| This also parses command-line options and modifies its behavior |
| accordingly. |
| |
| tests -- a list of strings containing test names (optional) |
| testdir -- the directory in which to look for tests (optional) |
| |
| Users other than the Python test suite will certainly want to |
| specify testdir; if it's omitted, the directory containing the |
| Python test suite is searched for. |
| |
| If the tests argument is omitted, the tests listed on the |
| command-line will be used. If that's empty, too, then all *.py |
| files beginning with test_ will be used. |
| |
| The other default arguments (verbose, quiet, exclude, |
| single, randomize, findleaks, use_resources, trace, coverdir, |
| print_slow, and random_seed) allow programmers calling main() |
| directly to set the values that would normally be set by flags |
| on the command line. |
| """ |
| |
| # Display the Python traceback fatal errors (e.g. segfault) |
| faulthandler.enable(all_threads=True) |
| |
| if hasattr(faulthandler, 'dump_tracebacks_later'): |
| timeout = 60*60 |
| else: |
| timeout = None |
| |
| replace_stdout() |
| |
| support.record_original_stdout(sys.stdout) |
| try: |
| opts, args = getopt.getopt(sys.argv[1:], 'hvqxsSrf:lu:t:TD:NLR:FwWM:nj:', |
| ['help', 'verbose', 'verbose2', 'verbose3', 'quiet', |
| 'exclude', 'single', 'slow', 'random', 'fromfile', 'findleaks', |
| 'use=', 'threshold=', 'trace', 'coverdir=', 'nocoverdir', |
| 'runleaks', 'huntrleaks=', 'memlimit=', 'randseed=', |
| 'multiprocess=', 'coverage', 'slaveargs=', 'forever', 'debug', |
| 'start=', 'nowindows', 'header', 'testdir=', 'timeout=', 'wait']) |
| except getopt.error as msg: |
| usage(msg) |
| |
| # Defaults |
| if random_seed is None: |
| random_seed = random.randrange(10000000) |
| if use_resources is None: |
| use_resources = [] |
| debug = False |
| start = None |
| for o, a in opts: |
| if o in ('-h', '--help'): |
| print(__doc__) |
| return |
| elif o in ('-v', '--verbose'): |
| verbose += 1 |
| elif o in ('-w', '--verbose2'): |
| verbose2 = True |
| elif o in ('-d', '--debug'): |
| debug = True |
| elif o in ('-W', '--verbose3'): |
| verbose3 = True |
| elif o in ('-q', '--quiet'): |
| quiet = True; |
| verbose = 0 |
| elif o in ('-x', '--exclude'): |
| exclude = True |
| elif o in ('-S', '--start'): |
| start = a |
| elif o in ('-s', '--single'): |
| single = True |
| elif o in ('-S', '--slow'): |
| print_slow = True |
| elif o in ('-r', '--randomize'): |
| randomize = True |
| elif o == '--randseed': |
| random_seed = int(a) |
| elif o in ('-f', '--fromfile'): |
| fromfile = a |
| elif o in ('-l', '--findleaks'): |
| findleaks = True |
| elif o in ('-L', '--runleaks'): |
| runleaks = True |
| elif o in ('-t', '--threshold'): |
| import gc |
| gc.set_threshold(int(a)) |
| elif o in ('-T', '--coverage'): |
| trace = True |
| elif o in ('-D', '--coverdir'): |
| # CWD is replaced with a temporary dir before calling main(), so we |
| # need join it with the saved CWD so it goes where the user expects. |
| coverdir = os.path.join(support.SAVEDCWD, a) |
| elif o in ('-N', '--nocoverdir'): |
| coverdir = None |
| elif o in ('-R', '--huntrleaks'): |
| huntrleaks = a.split(':') |
| if len(huntrleaks) not in (2, 3): |
| print(a, huntrleaks) |
| usage('-R takes 2 or 3 colon-separated arguments') |
| if not huntrleaks[0]: |
| huntrleaks[0] = 5 |
| else: |
| huntrleaks[0] = int(huntrleaks[0]) |
| if not huntrleaks[1]: |
| huntrleaks[1] = 4 |
| else: |
| huntrleaks[1] = int(huntrleaks[1]) |
| if len(huntrleaks) == 2 or not huntrleaks[2]: |
| huntrleaks[2:] = ["reflog.txt"] |
| # Avoid false positives due to the character cache in |
| # stringobject.c filling slowly with random data |
| warm_char_cache() |
| elif o in ('-M', '--memlimit'): |
| support.set_memlimit(a) |
| elif o in ('-u', '--use'): |
| u = [x.lower() for x in a.split(',')] |
| for r in u: |
| if r == 'all': |
| use_resources[:] = RESOURCE_NAMES |
| continue |
| remove = False |
| if r[0] == '-': |
| remove = True |
| r = r[1:] |
| if r not in RESOURCE_NAMES: |
| usage('Invalid -u/--use option: ' + a) |
| if remove: |
| if r in use_resources: |
| use_resources.remove(r) |
| elif r not in use_resources: |
| use_resources.append(r) |
| elif o in ('-n', '--nowindows'): |
| import msvcrt |
| msvcrt.SetErrorMode(msvcrt.SEM_FAILCRITICALERRORS| |
| msvcrt.SEM_NOALIGNMENTFAULTEXCEPT| |
| msvcrt.SEM_NOGPFAULTERRORBOX| |
| msvcrt.SEM_NOOPENFILEERRORBOX) |
| try: |
| msvcrt.CrtSetReportMode |
| except AttributeError: |
| # release build |
| pass |
| else: |
| for m in [msvcrt.CRT_WARN, msvcrt.CRT_ERROR, msvcrt.CRT_ASSERT]: |
| msvcrt.CrtSetReportMode(m, msvcrt.CRTDBG_MODE_FILE) |
| msvcrt.CrtSetReportFile(m, msvcrt.CRTDBG_FILE_STDERR) |
| elif o in ('-F', '--forever'): |
| forever = True |
| elif o in ('-j', '--multiprocess'): |
| use_mp = int(a) |
| if use_mp <= 0: |
| try: |
| import multiprocessing |
| # Use all cores + extras for tests that like to sleep |
| use_mp = 2 + multiprocessing.cpu_count() |
| except (ImportError, NotImplementedError): |
| use_mp = 3 |
| elif o == '--header': |
| header = True |
| elif o == '--slaveargs': |
| args, kwargs = json.loads(a) |
| try: |
| result = runtest(*args, **kwargs) |
| except BaseException as e: |
| result = INTERRUPTED, e.__class__.__name__ |
| sys.stdout.flush() |
| print() # Force a newline (just in case) |
| print(json.dumps(result)) |
| sys.exit(0) |
| elif o == '--testdir': |
| # CWD is replaced with a temporary dir before calling main(), so we |
| # join it with the saved CWD so it ends up where the user expects. |
| testdir = os.path.join(support.SAVEDCWD, a) |
| elif o == '--timeout': |
| if not hasattr(faulthandler, 'dump_tracebacks_later'): |
| print("--timeout option requires " |
| "faulthandler.dump_tracebacks_later", file=sys.stderr) |
| sys.exit(1) |
| timeout = float(a) |
| elif o == '--wait': |
| input("Press any key to continue...") |
| else: |
| print(("No handler for option {}. Please report this as a bug " |
| "at http://bugs.python.org.").format(o), file=sys.stderr) |
| sys.exit(1) |
| if single and fromfile: |
| usage("-s and -f don't go together!") |
| if use_mp and trace: |
| usage("-T and -j don't go together!") |
| if use_mp and findleaks: |
| usage("-l and -j don't go together!") |
| |
| good = [] |
| bad = [] |
| skipped = [] |
| resource_denieds = [] |
| environment_changed = [] |
| interrupted = False |
| |
| if findleaks: |
| try: |
| import gc |
| except ImportError: |
| print('No GC available, disabling findleaks.') |
| findleaks = False |
| else: |
| # Uncomment the line below to report garbage that is not |
| # freeable by reference counting alone. By default only |
| # garbage that is not collectable by the GC is reported. |
| #gc.set_debug(gc.DEBUG_SAVEALL) |
| found_garbage = [] |
| |
| if single: |
| filename = os.path.join(TEMPDIR, 'pynexttest') |
| try: |
| fp = open(filename, 'r') |
| next_test = fp.read().strip() |
| tests = [next_test] |
| fp.close() |
| except IOError: |
| pass |
| |
| if fromfile: |
| tests = [] |
| fp = open(os.path.join(support.SAVEDCWD, fromfile)) |
| count_pat = re.compile(r'\[\s*\d+/\s*\d+\]') |
| for line in fp: |
| line = count_pat.sub('', line) |
| guts = line.split() # assuming no test has whitespace in its name |
| if guts and not guts[0].startswith('#'): |
| tests.extend(guts) |
| fp.close() |
| |
| # Strip .py extensions. |
| removepy(args) |
| removepy(tests) |
| |
| stdtests = STDTESTS[:] |
| nottests = NOTTESTS.copy() |
| if exclude: |
| for arg in args: |
| if arg in stdtests: |
| stdtests.remove(arg) |
| nottests.add(arg) |
| args = [] |
| |
| # For a partial run, we do not need to clutter the output. |
| if verbose or header or not (quiet or single or tests or args): |
| # Print basic platform information |
| print("==", platform.python_implementation(), *sys.version.split()) |
| print("== ", platform.platform(aliased=True), |
| "%s-endian" % sys.byteorder) |
| print("== ", os.getcwd()) |
| print("Testing with flags:", sys.flags) |
| |
| # if testdir is set, then we are not running the python tests suite, so |
| # don't add default tests to be executed or skipped (pass empty values) |
| if testdir: |
| alltests = findtests(testdir, list(), set()) |
| else: |
| alltests = findtests(testdir, stdtests, nottests) |
| |
| selected = tests or args or alltests |
| if single: |
| selected = selected[:1] |
| try: |
| next_single_test = alltests[alltests.index(selected[0])+1] |
| except IndexError: |
| next_single_test = None |
| # Remove all the tests that precede start if it's set. |
| if start: |
| try: |
| del tests[:tests.index(start)] |
| except ValueError: |
| print("Couldn't find starting test (%s), using all tests" % start) |
| if randomize: |
| random.seed(random_seed) |
| print("Using random seed", random_seed) |
| random.shuffle(selected) |
| if trace: |
| import trace, tempfile |
| tracer = trace.Trace(ignoredirs=[sys.prefix, sys.exec_prefix, |
| tempfile.gettempdir()], |
| trace=False, count=True) |
| |
| test_times = [] |
| support.verbose = verbose # Tell tests to be moderately quiet |
| support.use_resources = use_resources |
| save_modules = sys.modules.keys() |
| |
| def accumulate_result(test, result): |
| ok, test_time = result |
| test_times.append((test_time, test)) |
| if ok == PASSED: |
| good.append(test) |
| elif ok == FAILED: |
| bad.append(test) |
| elif ok == ENV_CHANGED: |
| bad.append(test) |
| environment_changed.append(test) |
| elif ok == SKIPPED: |
| skipped.append(test) |
| elif ok == RESOURCE_DENIED: |
| skipped.append(test) |
| resource_denieds.append(test) |
| |
| if forever: |
| def test_forever(tests=list(selected)): |
| while True: |
| for test in tests: |
| yield test |
| if bad: |
| return |
| tests = test_forever() |
| test_count = '' |
| test_count_width = 3 |
| else: |
| tests = iter(selected) |
| test_count = '/{}'.format(len(selected)) |
| test_count_width = len(test_count) - 1 |
| |
| if use_mp: |
| try: |
| from threading import Thread |
| except ImportError: |
| print("Multiprocess option requires thread support") |
| sys.exit(2) |
| from queue import Queue |
| from subprocess import Popen, PIPE |
| debug_output_pat = re.compile(r"\[\d+ refs\]$") |
| output = Queue() |
| def tests_and_args(): |
| for test in tests: |
| args_tuple = ( |
| (test, verbose, quiet), |
| dict(huntrleaks=huntrleaks, use_resources=use_resources, |
| debug=debug, rerun_failed=verbose3, timeout=timeout) |
| ) |
| yield (test, args_tuple) |
| pending = tests_and_args() |
| opt_args = support.args_from_interpreter_flags() |
| base_cmd = [sys.executable] + opt_args + ['-m', 'test.regrtest'] |
| def work(): |
| # A worker thread. |
| try: |
| while True: |
| try: |
| test, args_tuple = next(pending) |
| except StopIteration: |
| output.put((None, None, None, None)) |
| return |
| # -E is needed by some tests, e.g. test_import |
| popen = Popen(base_cmd + ['--slaveargs', json.dumps(args_tuple)], |
| stdout=PIPE, stderr=PIPE, |
| universal_newlines=True, |
| close_fds=(os.name != 'nt')) |
| stdout, stderr = popen.communicate() |
| retcode = popen.wait() |
| # Strip last refcount output line if it exists, since it |
| # comes from the shutdown of the interpreter in the subcommand. |
| stderr = debug_output_pat.sub("", stderr) |
| stdout, _, result = stdout.strip().rpartition("\n") |
| if retcode != 0: |
| result = (CHILD_ERROR, "Exit code %s" % retcode) |
| output.put((test, stdout.rstrip(), stderr.rstrip(), result)) |
| return |
| if not result: |
| output.put((None, None, None, None)) |
| return |
| result = json.loads(result) |
| output.put((test, stdout.rstrip(), stderr.rstrip(), result)) |
| except BaseException: |
| output.put((None, None, None, None)) |
| raise |
| workers = [Thread(target=work) for i in range(use_mp)] |
| for worker in workers: |
| worker.start() |
| finished = 0 |
| test_index = 1 |
| try: |
| while finished < use_mp: |
| test, stdout, stderr, result = output.get() |
| if test is None: |
| finished += 1 |
| continue |
| accumulate_result(test, result) |
| if not quiet: |
| fmt = "[{1:{0}}{2}/{3}] {4}" if bad else "[{1:{0}}{2}] {4}" |
| print(fmt.format( |
| test_count_width, test_index, test_count, |
| len(bad), test)) |
| if stdout: |
| print(stdout) |
| if stderr: |
| print(stderr, file=sys.stderr) |
| if result[0] == INTERRUPTED: |
| assert result[1] == 'KeyboardInterrupt' |
| raise KeyboardInterrupt # What else? |
| if result[0] == CHILD_ERROR: |
| raise Exception("Child error on {}: {}".format(test, result[1])) |
| test_index += 1 |
| except KeyboardInterrupt: |
| interrupted = True |
| pending.close() |
| for worker in workers: |
| worker.join() |
| else: |
| for test_index, test in enumerate(tests, 1): |
| if not quiet: |
| fmt = "[{1:{0}}{2}/{3}] {4}" if bad else "[{1:{0}}{2}] {4}" |
| print(fmt.format( |
| test_count_width, test_index, test_count, len(bad), test)) |
| sys.stdout.flush() |
| if trace: |
| # If we're tracing code coverage, then we don't exit with status |
| # if on a false return value from main. |
| tracer.runctx('runtest(test, verbose, quiet, timeout=timeout)', |
| globals=globals(), locals=vars()) |
| else: |
| try: |
| result = runtest(test, verbose, quiet, huntrleaks, debug, |
| rerun_failed=verbose3, timeout=timeout) |
| accumulate_result(test, result) |
| except KeyboardInterrupt: |
| interrupted = True |
| break |
| except: |
| raise |
| if findleaks: |
| gc.collect() |
| if gc.garbage: |
| print("Warning: test created", len(gc.garbage), end=' ') |
| print("uncollectable object(s).") |
| # move the uncollectable objects somewhere so we don't see |
| # them again |
| found_garbage.extend(gc.garbage) |
| del gc.garbage[:] |
| # Unload the newly imported modules (best effort finalization) |
| for module in sys.modules.keys(): |
| if module not in save_modules and module.startswith("test."): |
| support.unload(module) |
| |
| if interrupted: |
| # print a newline after ^C |
| print() |
| print("Test suite interrupted by signal SIGINT.") |
| omitted = set(selected) - set(good) - set(bad) - set(skipped) |
| print(count(len(omitted), "test"), "omitted:") |
| printlist(omitted) |
| if good and not quiet: |
| if not bad and not skipped and not interrupted and len(good) > 1: |
| print("All", end=' ') |
| print(count(len(good), "test"), "OK.") |
| if print_slow: |
| test_times.sort(reverse=True) |
| print("10 slowest tests:") |
| for time, test in test_times[:10]: |
| print("%s: %.1fs" % (test, time)) |
| if bad: |
| bad = sorted(set(bad) - set(environment_changed)) |
| if bad: |
| print(count(len(bad), "test"), "failed:") |
| printlist(bad) |
| if environment_changed: |
| print("{} altered the execution environment:".format( |
| count(len(environment_changed), "test"))) |
| printlist(environment_changed) |
| if skipped and not quiet: |
| print(count(len(skipped), "test"), "skipped:") |
| printlist(skipped) |
| |
| e = _ExpectedSkips() |
| plat = sys.platform |
| if e.isvalid(): |
| surprise = set(skipped) - e.getexpected() - set(resource_denieds) |
| if surprise: |
| print(count(len(surprise), "skip"), \ |
| "unexpected on", plat + ":") |
| printlist(surprise) |
| else: |
| print("Those skips are all expected on", plat + ".") |
| else: |
| print("Ask someone to teach regrtest.py about which tests are") |
| print("expected to get skipped on", plat + ".") |
| |
| if verbose2 and bad: |
| print("Re-running failed tests in verbose mode") |
| for test in bad: |
| print("Re-running test %r in verbose mode" % test) |
| sys.stdout.flush() |
| try: |
| verbose = True |
| ok = runtest(test, True, quiet, huntrleaks, debug, timeout=timeout) |
| except KeyboardInterrupt: |
| # print a newline separate from the ^C |
| print() |
| break |
| except: |
| raise |
| |
| if single: |
| if next_single_test: |
| with open(filename, 'w') as fp: |
| fp.write(next_single_test + '\n') |
| else: |
| os.unlink(filename) |
| |
| if trace: |
| r = tracer.results() |
| r.write_results(show_missing=True, summary=True, coverdir=coverdir) |
| |
| if runleaks: |
| os.system("leaks %d" % os.getpid()) |
| |
| sys.exit(len(bad) > 0 or interrupted) |
| |
| |
| # small set of tests to determine if we have a basically functioning interpreter |
| # (i.e. if any of these fail, then anything else is likely to follow) |
| STDTESTS = [ |
| 'test_grammar', |
| 'test_opcodes', |
| 'test_dict', |
| 'test_builtin', |
| 'test_exceptions', |
| 'test_types', |
| 'test_unittest', |
| 'test_doctest', |
| 'test_doctest2', |
| ] |
| |
| # set of tests that we don't want to be executed when using regrtest |
| NOTTESTS = set() |
| |
| def findtests(testdir=None, stdtests=STDTESTS, nottests=NOTTESTS): |
| """Return a list of all applicable test modules.""" |
| testdir = findtestdir(testdir) |
| names = os.listdir(testdir) |
| tests = [] |
| others = set(stdtests) | nottests |
| for name in names: |
| mod, ext = os.path.splitext(name) |
| if mod[:5] == "test_" and ext in (".py", "") and mod not in others: |
| tests.append(mod) |
| return stdtests + sorted(tests) |
| |
| def replace_stdout(): |
| """Set stdout encoder error handler to backslashreplace (as stderr error |
| handler) to avoid UnicodeEncodeError when printing a traceback""" |
| import atexit |
| |
| stdout = sys.stdout |
| sys.stdout = open(stdout.fileno(), 'w', |
| encoding=stdout.encoding, |
| errors="backslashreplace", |
| closefd=False, |
| newline='\n') |
| |
| def restore_stdout(): |
| sys.stdout.close() |
| sys.stdout = stdout |
| atexit.register(restore_stdout) |
| |
| def runtest(test, verbose, quiet, |
| huntrleaks=False, debug=False, use_resources=None, |
| rerun_failed=False, timeout=None): |
| """Run a single test. |
| |
| test -- the name of the test |
| verbose -- if true, print more messages |
| quiet -- if true, don't print 'skipped' messages (probably redundant) |
| test_times -- a list of (time, test_name) pairs |
| huntrleaks -- run multiple times to test for leaks; requires a debug |
| build; a triple corresponding to -R's three arguments |
| rerun_failed -- if true, re-run in verbose mode when failed |
| timeout -- dump the traceback and exit if a test takes more than |
| timeout seconds |
| |
| Returns one of the test result constants: |
| INTERRUPTED KeyboardInterrupt when run under -j |
| RESOURCE_DENIED test skipped because resource denied |
| SKIPPED test skipped for some other reason |
| ENV_CHANGED test failed because it changed the execution environment |
| FAILED test failed |
| PASSED test passed |
| """ |
| |
| support.verbose = verbose # Tell tests to be moderately quiet |
| if use_resources is not None: |
| support.use_resources = use_resources |
| use_timeout = (timeout is not None and timeout > 0) |
| if use_timeout: |
| faulthandler.dump_tracebacks_later(timeout, exit=True) |
| try: |
| result = runtest_inner(test, verbose, quiet, huntrleaks, debug) |
| if result[0] == FAILED and rerun_failed: |
| cleanup_test_droppings(test, verbose) |
| sys.stdout.flush() |
| sys.stderr.flush() |
| print("Re-running test {} in verbose mode".format(test)) |
| runtest(test, True, quiet, huntrleaks, debug, timeout=timeout) |
| return result |
| finally: |
| if use_timeout: |
| faulthandler.cancel_dump_tracebacks_later() |
| cleanup_test_droppings(test, verbose) |
| |
| # Unit tests are supposed to leave the execution environment unchanged |
| # once they complete. But sometimes tests have bugs, especially when |
| # tests fail, and the changes to environment go on to mess up other |
| # tests. This can cause issues with buildbot stability, since tests |
| # are run in random order and so problems may appear to come and go. |
| # There are a few things we can save and restore to mitigate this, and |
| # the following context manager handles this task. |
| |
| class saved_test_environment: |
| """Save bits of the test environment and restore them at block exit. |
| |
| with saved_test_environment(testname, verbose, quiet): |
| #stuff |
| |
| Unless quiet is True, a warning is printed to stderr if any of |
| the saved items was changed by the test. The attribute 'changed' |
| is initially False, but is set to True if a change is detected. |
| |
| If verbose is more than 1, the before and after state of changed |
| items is also printed. |
| """ |
| |
| changed = False |
| |
| def __init__(self, testname, verbose=0, quiet=False): |
| self.testname = testname |
| self.verbose = verbose |
| self.quiet = quiet |
| |
| # To add things to save and restore, add a name XXX to the resources list |
| # and add corresponding get_XXX/restore_XXX functions. get_XXX should |
| # return the value to be saved and compared against a second call to the |
| # get function when test execution completes. restore_XXX should accept |
| # the saved value and restore the resource using it. It will be called if |
| # and only if a change in the value is detected. |
| # |
| # Note: XXX will have any '.' replaced with '_' characters when determining |
| # the corresponding method names. |
| |
| resources = ('sys.argv', 'cwd', 'sys.stdin', 'sys.stdout', 'sys.stderr', |
| 'os.environ', 'sys.path', 'sys.path_hooks', '__import__', |
| 'warnings.filters', 'asyncore.socket_map', |
| 'logging._handlers', 'logging._handlerList', 'sys.gettrace', |
| 'sys.warnoptions') |
| |
| def get_sys_argv(self): |
| return id(sys.argv), sys.argv, sys.argv[:] |
| def restore_sys_argv(self, saved_argv): |
| sys.argv = saved_argv[1] |
| sys.argv[:] = saved_argv[2] |
| |
| def get_cwd(self): |
| return os.getcwd() |
| def restore_cwd(self, saved_cwd): |
| os.chdir(saved_cwd) |
| |
| def get_sys_stdout(self): |
| return sys.stdout |
| def restore_sys_stdout(self, saved_stdout): |
| sys.stdout = saved_stdout |
| |
| def get_sys_stderr(self): |
| return sys.stderr |
| def restore_sys_stderr(self, saved_stderr): |
| sys.stderr = saved_stderr |
| |
| def get_sys_stdin(self): |
| return sys.stdin |
| def restore_sys_stdin(self, saved_stdin): |
| sys.stdin = saved_stdin |
| |
| def get_os_environ(self): |
| return id(os.environ), os.environ, dict(os.environ) |
| def restore_os_environ(self, saved_environ): |
| os.environ = saved_environ[1] |
| os.environ.clear() |
| os.environ.update(saved_environ[2]) |
| |
| def get_sys_path(self): |
| return id(sys.path), sys.path, sys.path[:] |
| def restore_sys_path(self, saved_path): |
| sys.path = saved_path[1] |
| sys.path[:] = saved_path[2] |
| |
| def get_sys_path_hooks(self): |
| return id(sys.path_hooks), sys.path_hooks, sys.path_hooks[:] |
| def restore_sys_path_hooks(self, saved_hooks): |
| sys.path_hooks = saved_hooks[1] |
| sys.path_hooks[:] = saved_hooks[2] |
| |
| def get_sys_gettrace(self): |
| return sys.gettrace() |
| def restore_sys_gettrace(self, trace_fxn): |
| sys.settrace(trace_fxn) |
| |
| def get___import__(self): |
| return builtins.__import__ |
| def restore___import__(self, import_): |
| builtins.__import__ = import_ |
| |
| def get_warnings_filters(self): |
| return id(warnings.filters), warnings.filters, warnings.filters[:] |
| def restore_warnings_filters(self, saved_filters): |
| warnings.filters = saved_filters[1] |
| warnings.filters[:] = saved_filters[2] |
| |
| def get_asyncore_socket_map(self): |
| asyncore = sys.modules.get('asyncore') |
| # XXX Making a copy keeps objects alive until __exit__ gets called. |
| return asyncore and asyncore.socket_map.copy() or {} |
| def restore_asyncore_socket_map(self, saved_map): |
| asyncore = sys.modules.get('asyncore') |
| if asyncore is not None: |
| asyncore.close_all(ignore_all=True) |
| asyncore.socket_map.update(saved_map) |
| |
| def get_logging__handlers(self): |
| # _handlers is a WeakValueDictionary |
| return id(logging._handlers), logging._handlers, logging._handlers.copy() |
| def restore_logging__handlers(self, saved_handlers): |
| # Can't easily revert the logging state |
| pass |
| |
| def get_logging__handlerList(self): |
| # _handlerList is a list of weakrefs to handlers |
| return id(logging._handlerList), logging._handlerList, logging._handlerList[:] |
| def restore_logging__handlerList(self, saved_handlerList): |
| # Can't easily revert the logging state |
| pass |
| |
| def get_sys_warnoptions(self): |
| return id(sys.warnoptions), sys.warnoptions, sys.warnoptions[:] |
| def restore_sys_warnoptions(self, saved_options): |
| sys.warnoptions = saved_options[1] |
| sys.warnoptions[:] = saved_options[2] |
| |
| def resource_info(self): |
| for name in self.resources: |
| method_suffix = name.replace('.', '_') |
| get_name = 'get_' + method_suffix |
| restore_name = 'restore_' + method_suffix |
| yield name, getattr(self, get_name), getattr(self, restore_name) |
| |
| def __enter__(self): |
| self.saved_values = dict((name, get()) for name, get, restore |
| in self.resource_info()) |
| return self |
| |
| def __exit__(self, exc_type, exc_val, exc_tb): |
| saved_values = self.saved_values |
| del self.saved_values |
| for name, get, restore in self.resource_info(): |
| current = get() |
| original = saved_values.pop(name) |
| # Check for changes to the resource's value |
| if current != original: |
| self.changed = True |
| restore(original) |
| if not self.quiet: |
| print("Warning -- {} was modified by {}".format( |
| name, self.testname), |
| file=sys.stderr) |
| if self.verbose > 1: |
| print(" Before: {}\n After: {} ".format( |
| original, current), |
| file=sys.stderr) |
| return False |
| |
| |
| def runtest_inner(test, verbose, quiet, huntrleaks=False, debug=False): |
| support.unload(test) |
| |
| test_time = 0.0 |
| refleak = False # True if the test leaked references. |
| try: |
| if test.startswith('test.'): |
| abstest = test |
| else: |
| # Always import it from the test package |
| abstest = 'test.' + test |
| with saved_test_environment(test, verbose, quiet) as environment: |
| start_time = time.time() |
| the_package = __import__(abstest, globals(), locals(), []) |
| the_module = getattr(the_package, test) |
| # Old tests run to completion simply as a side-effect of |
| # being imported. For tests based on unittest or doctest, |
| # explicitly invoke their test_main() function (if it exists). |
| indirect_test = getattr(the_module, "test_main", None) |
| if indirect_test is not None: |
| indirect_test() |
| if huntrleaks: |
| refleak = dash_R(the_module, test, indirect_test, |
| huntrleaks) |
| test_time = time.time() - start_time |
| except support.ResourceDenied as msg: |
| if not quiet: |
| print(test, "skipped --", msg) |
| sys.stdout.flush() |
| return RESOURCE_DENIED, test_time |
| except unittest.SkipTest as msg: |
| if not quiet: |
| print(test, "skipped --", msg) |
| sys.stdout.flush() |
| return SKIPPED, test_time |
| except KeyboardInterrupt: |
| raise |
| except support.TestFailed as msg: |
| print("test", test, "failed --", msg, file=sys.stderr) |
| sys.stderr.flush() |
| return FAILED, test_time |
| except: |
| msg = traceback.format_exc() |
| print("test", test, "crashed --", msg, file=sys.stderr) |
| sys.stderr.flush() |
| return FAILED, test_time |
| else: |
| if refleak: |
| return FAILED, test_time |
| if environment.changed: |
| return ENV_CHANGED, test_time |
| return PASSED, test_time |
| |
| def cleanup_test_droppings(testname, verbose): |
| import shutil |
| import stat |
| import gc |
| |
| # First kill any dangling references to open files etc. |
| # This can also issue some ResourceWarnings which would otherwise get |
| # triggered during the following test run, and possibly produce failures. |
| gc.collect() |
| |
| # Try to clean up junk commonly left behind. While tests shouldn't leave |
| # any files or directories behind, when a test fails that can be tedious |
| # for it to arrange. The consequences can be especially nasty on Windows, |
| # since if a test leaves a file open, it cannot be deleted by name (while |
| # there's nothing we can do about that here either, we can display the |
| # name of the offending test, which is a real help). |
| for name in (support.TESTFN, |
| "db_home", |
| ): |
| if not os.path.exists(name): |
| continue |
| |
| if os.path.isdir(name): |
| kind, nuker = "directory", shutil.rmtree |
| elif os.path.isfile(name): |
| kind, nuker = "file", os.unlink |
| else: |
| raise SystemError("os.path says %r exists but is neither " |
| "directory nor file" % name) |
| |
| if verbose: |
| print("%r left behind %s %r" % (testname, kind, name)) |
| try: |
| # if we have chmod, fix possible permissions problems |
| # that might prevent cleanup |
| if (hasattr(os, 'chmod')): |
| os.chmod(name, stat.S_IRWXU | stat.S_IRWXG | stat.S_IRWXO) |
| nuker(name) |
| except Exception as msg: |
| print(("%r left behind %s %r and it couldn't be " |
| "removed: %s" % (testname, kind, name, msg)), file=sys.stderr) |
| |
| def dash_R(the_module, test, indirect_test, huntrleaks): |
| """Run a test multiple times, looking for reference leaks. |
| |
| Returns: |
| False if the test didn't leak references; True if we detected refleaks. |
| """ |
| # This code is hackish and inelegant, but it seems to do the job. |
| import copyreg |
| import collections.abc |
| |
| if not hasattr(sys, 'gettotalrefcount'): |
| raise Exception("Tracking reference leaks requires a debug build " |
| "of Python") |
| |
| # Save current values for dash_R_cleanup() to restore. |
| fs = warnings.filters[:] |
| ps = copyreg.dispatch_table.copy() |
| pic = sys.path_importer_cache.copy() |
| try: |
| import zipimport |
| except ImportError: |
| zdc = None # Run unmodified on platforms without zipimport support |
| else: |
| zdc = zipimport._zip_directory_cache.copy() |
| abcs = {} |
| for abc in [getattr(collections.abc, a) for a in collections.abc.__all__]: |
| if not isabstract(abc): |
| continue |
| for obj in abc.__subclasses__() + [abc]: |
| abcs[obj] = obj._abc_registry.copy() |
| |
| if indirect_test: |
| def run_the_test(): |
| indirect_test() |
| else: |
| def run_the_test(): |
| del sys.modules[the_module.__name__] |
| exec('import ' + the_module.__name__) |
| |
| deltas = [] |
| nwarmup, ntracked, fname = huntrleaks |
| fname = os.path.join(support.SAVEDCWD, fname) |
| repcount = nwarmup + ntracked |
| print("beginning", repcount, "repetitions", file=sys.stderr) |
| print(("1234567890"*(repcount//10 + 1))[:repcount], file=sys.stderr) |
| sys.stderr.flush() |
| dash_R_cleanup(fs, ps, pic, zdc, abcs) |
| for i in range(repcount): |
| rc_before = sys.gettotalrefcount() |
| run_the_test() |
| sys.stderr.write('.') |
| sys.stderr.flush() |
| dash_R_cleanup(fs, ps, pic, zdc, abcs) |
| rc_after = sys.gettotalrefcount() |
| if i >= nwarmup: |
| deltas.append(rc_after - rc_before) |
| print(file=sys.stderr) |
| if any(deltas): |
| msg = '%s leaked %s references, sum=%s' % (test, deltas, sum(deltas)) |
| print(msg, file=sys.stderr) |
| sys.stderr.flush() |
| with open(fname, "a") as refrep: |
| print(msg, file=refrep) |
| refrep.flush() |
| return True |
| return False |
| |
| def dash_R_cleanup(fs, ps, pic, zdc, abcs): |
| import gc, copyreg |
| import _strptime, linecache |
| import urllib.parse, urllib.request, mimetypes, doctest |
| import struct, filecmp, collections.abc |
| from distutils.dir_util import _path_created |
| from weakref import WeakSet |
| |
| # Clear the warnings registry, so they can be displayed again |
| for mod in sys.modules.values(): |
| if hasattr(mod, '__warningregistry__'): |
| del mod.__warningregistry__ |
| |
| # Restore some original values. |
| warnings.filters[:] = fs |
| copyreg.dispatch_table.clear() |
| copyreg.dispatch_table.update(ps) |
| sys.path_importer_cache.clear() |
| sys.path_importer_cache.update(pic) |
| try: |
| import zipimport |
| except ImportError: |
| pass # Run unmodified on platforms without zipimport support |
| else: |
| zipimport._zip_directory_cache.clear() |
| zipimport._zip_directory_cache.update(zdc) |
| |
| # clear type cache |
| sys._clear_type_cache() |
| |
| # Clear ABC registries, restoring previously saved ABC registries. |
| for abc in [getattr(collections.abc, a) for a in collections.abc.__all__]: |
| if not isabstract(abc): |
| continue |
| for obj in abc.__subclasses__() + [abc]: |
| obj._abc_registry = abcs.get(obj, WeakSet()).copy() |
| obj._abc_cache.clear() |
| obj._abc_negative_cache.clear() |
| |
| # Flush standard output, so that buffered data is sent to the OS and |
| # associated Python objects are reclaimed. |
| for stream in (sys.stdout, sys.stderr, sys.__stdout__, sys.__stderr__): |
| if stream is not None: |
| stream.flush() |
| |
| # Clear assorted module caches. |
| _path_created.clear() |
| re.purge() |
| _strptime._regex_cache.clear() |
| urllib.parse.clear_cache() |
| urllib.request.urlcleanup() |
| linecache.clearcache() |
| mimetypes._default_mime_types() |
| filecmp._cache.clear() |
| struct._clearcache() |
| doctest.master = None |
| |
| # Collect cyclic trash. |
| gc.collect() |
| |
| def warm_char_cache(): |
| s = bytes(range(256)) |
| for i in range(256): |
| s[i:i+1] |
| |
| def findtestdir(path=None): |
| return path or os.path.dirname(__file__) or os.curdir |
| |
| def removepy(names): |
| if not names: |
| return |
| for idx, name in enumerate(names): |
| basename, ext = os.path.splitext(name) |
| if ext == '.py': |
| names[idx] = basename |
| |
| def count(n, word): |
| if n == 1: |
| return "%d %s" % (n, word) |
| else: |
| return "%d %ss" % (n, word) |
| |
| def printlist(x, width=70, indent=4): |
| """Print the elements of iterable x to stdout. |
| |
| Optional arg width (default 70) is the maximum line length. |
| Optional arg indent (default 4) is the number of blanks with which to |
| begin each line. |
| """ |
| |
| from textwrap import fill |
| blanks = ' ' * indent |
| # Print the sorted list: 'x' may be a '--random' list or a set() |
| print(fill(' '.join(str(elt) for elt in sorted(x)), width, |
| initial_indent=blanks, subsequent_indent=blanks)) |
| |
| # Map sys.platform to a string containing the basenames of tests |
| # expected to be skipped on that platform. |
| # |
| # Special cases: |
| # test_pep277 |
| # The _ExpectedSkips constructor adds this to the set of expected |
| # skips if not os.path.supports_unicode_filenames. |
| # test_timeout |
| # Controlled by test_timeout.skip_expected. Requires the network |
| # resource and a socket module. |
| # |
| # Tests that are expected to be skipped everywhere except on one platform |
| # are also handled separately. |
| |
| _expectations = { |
| 'win32': |
| """ |
| test__locale |
| test_crypt |
| test_curses |
| test_dbm |
| test_fcntl |
| test_fork1 |
| test_epoll |
| test_dbm_gnu |
| test_dbm_ndbm |
| test_grp |
| test_ioctl |
| test_largefile |
| test_kqueue |
| test_openpty |
| test_ossaudiodev |
| test_pipes |
| test_poll |
| test_posix |
| test_pty |
| test_pwd |
| test_resource |
| test_signal |
| test_syslog |
| test_threadsignals |
| test_wait3 |
| test_wait4 |
| """, |
| 'linux2': |
| """ |
| test_curses |
| test_largefile |
| test_kqueue |
| test_ossaudiodev |
| """, |
| 'unixware7': |
| """ |
| test_epoll |
| test_largefile |
| test_kqueue |
| test_minidom |
| test_openpty |
| test_pyexpat |
| test_sax |
| test_sundry |
| """, |
| 'openunix8': |
| """ |
| test_epoll |
| test_largefile |
| test_kqueue |
| test_minidom |
| test_openpty |
| test_pyexpat |
| test_sax |
| test_sundry |
| """, |
| 'sco_sv3': |
| """ |
| test_asynchat |
| test_fork1 |
| test_epoll |
| test_gettext |
| test_largefile |
| test_locale |
| test_kqueue |
| test_minidom |
| test_openpty |
| test_pyexpat |
| test_queue |
| test_sax |
| test_sundry |
| test_thread |
| test_threaded_import |
| test_threadedtempfile |
| test_threading |
| """, |
| 'darwin': |
| """ |
| test__locale |
| test_curses |
| test_epoll |
| test_dbm_gnu |
| test_gdb |
| test_largefile |
| test_locale |
| test_minidom |
| test_ossaudiodev |
| test_poll |
| """, |
| 'sunos5': |
| """ |
| test_curses |
| test_dbm |
| test_epoll |
| test_kqueue |
| test_dbm_gnu |
| test_gzip |
| test_openpty |
| test_zipfile |
| test_zlib |
| """, |
| 'hp-ux11': |
| """ |
| test_curses |
| test_epoll |
| test_dbm_gnu |
| test_gzip |
| test_largefile |
| test_locale |
| test_kqueue |
| test_minidom |
| test_openpty |
| test_pyexpat |
| test_sax |
| test_zipfile |
| test_zlib |
| """, |
| 'cygwin': |
| """ |
| test_curses |
| test_dbm |
| test_epoll |
| test_ioctl |
| test_kqueue |
| test_largefile |
| test_locale |
| test_ossaudiodev |
| test_socketserver |
| """, |
| 'os2emx': |
| """ |
| test_audioop |
| test_curses |
| test_epoll |
| test_kqueue |
| test_largefile |
| test_mmap |
| test_openpty |
| test_ossaudiodev |
| test_pty |
| test_resource |
| test_signal |
| """, |
| 'freebsd4': |
| """ |
| test_epoll |
| test_dbm_gnu |
| test_locale |
| test_ossaudiodev |
| test_pep277 |
| test_pty |
| test_socketserver |
| test_tcl |
| test_tk |
| test_ttk_guionly |
| test_ttk_textonly |
| test_timeout |
| test_urllibnet |
| test_multiprocessing |
| """, |
| 'aix5': |
| """ |
| test_bz2 |
| test_epoll |
| test_dbm_gnu |
| test_gzip |
| test_kqueue |
| test_ossaudiodev |
| test_tcl |
| test_tk |
| test_ttk_guionly |
| test_ttk_textonly |
| test_zipimport |
| test_zlib |
| """, |
| 'openbsd3': |
| """ |
| test_ctypes |
| test_epoll |
| test_dbm_gnu |
| test_locale |
| test_normalization |
| test_ossaudiodev |
| test_pep277 |
| test_tcl |
| test_tk |
| test_ttk_guionly |
| test_ttk_textonly |
| test_multiprocessing |
| """, |
| 'netbsd3': |
| """ |
| test_ctypes |
| test_curses |
| test_epoll |
| test_dbm_gnu |
| test_locale |
| test_ossaudiodev |
| test_pep277 |
| test_tcl |
| test_tk |
| test_ttk_guionly |
| test_ttk_textonly |
| test_multiprocessing |
| """, |
| } |
| _expectations['freebsd5'] = _expectations['freebsd4'] |
| _expectations['freebsd6'] = _expectations['freebsd4'] |
| _expectations['freebsd7'] = _expectations['freebsd4'] |
| _expectations['freebsd8'] = _expectations['freebsd4'] |
| |
| class _ExpectedSkips: |
| def __init__(self): |
| import os.path |
| from test import test_timeout |
| |
| self.valid = False |
| if sys.platform in _expectations: |
| s = _expectations[sys.platform] |
| self.expected = set(s.split()) |
| |
| # These are broken tests, for now skipped on every platform. |
| # XXX Fix these! |
| self.expected.add('test_nis') |
| |
| # expected to be skipped on every platform, even Linux |
| if not os.path.supports_unicode_filenames: |
| self.expected.add('test_pep277') |
| |
| # doctest, profile and cProfile tests fail when the codec for the |
| # fs encoding isn't built in because PyUnicode_Decode() adds two |
| # calls into Python. |
| encs = ("utf-8", "latin-1", "ascii", "mbcs", "utf-16", "utf-32") |
| if sys.getfilesystemencoding().lower() not in encs: |
| self.expected.add('test_profile') |
| self.expected.add('test_cProfile') |
| self.expected.add('test_doctest') |
| |
| if test_timeout.skip_expected: |
| self.expected.add('test_timeout') |
| |
| if sys.platform != "win32": |
| # test_sqlite is only reliable on Windows where the library |
| # is distributed with Python |
| WIN_ONLY = {"test_unicode_file", "test_winreg", |
| "test_winsound", "test_startfile", |
| "test_sqlite", "test_msilib"} |
| self.expected |= WIN_ONLY |
| |
| if sys.platform != 'sunos5': |
| self.expected.add('test_nis') |
| |
| if support.python_is_optimized(): |
| self.expected.add("test_gdb") |
| |
| self.valid = True |
| |
| def isvalid(self): |
| "Return true iff _ExpectedSkips knows about the current platform." |
| return self.valid |
| |
| def getexpected(self): |
| """Return set of test names we expect to skip on current platform. |
| |
| self.isvalid() must be true. |
| """ |
| |
| assert self.isvalid() |
| return self.expected |
| |
| def _make_temp_dir_for_build(TEMPDIR): |
| # When tests are run from the Python build directory, it is best practice |
| # to keep the test files in a subfolder. It eases the cleanup of leftover |
| # files using command "make distclean". |
| if sysconfig.is_python_build(): |
| TEMPDIR = os.path.join(sysconfig.get_config_var('srcdir'), 'build') |
| TEMPDIR = os.path.abspath(TEMPDIR) |
| try: |
| os.mkdir(TEMPDIR) |
| except OSError as e: |
| if e.errno != errno.EEXIST: |
| raise |
| |
| # Define a writable temp dir that will be used as cwd while running |
| # the tests. The name of the dir includes the pid to allow parallel |
| # testing (see the -j option). |
| TESTCWD = 'test_python_{}'.format(os.getpid()) |
| |
| TESTCWD = os.path.join(TEMPDIR, TESTCWD) |
| return TEMPDIR, TESTCWD |
| |
| if __name__ == '__main__': |
| # Remove regrtest.py's own directory from the module search path. Despite |
| # the elimination of implicit relative imports, this is still needed to |
| # ensure that submodules of the test package do not inappropriately appear |
| # as top-level modules even when people (or buildbots!) invoke regrtest.py |
| # directly instead of using the -m switch |
| mydir = os.path.abspath(os.path.normpath(os.path.dirname(sys.argv[0]))) |
| i = len(sys.path) |
| while i >= 0: |
| i -= 1 |
| if os.path.abspath(os.path.normpath(sys.path[i])) == mydir: |
| del sys.path[i] |
| |
| # findtestdir() gets the dirname out of __file__, so we have to make it |
| # absolute before changing the working directory. |
| # For example __file__ may be relative when running trace or profile. |
| # See issue #9323. |
| __file__ = os.path.abspath(__file__) |
| |
| # sanity check |
| assert __file__ == os.path.abspath(sys.argv[0]) |
| |
| TEMPDIR, TESTCWD = _make_temp_dir_for_build(TEMPDIR) |
| |
| # Run the tests in a context manager that temporary changes the CWD to a |
| # temporary and writable directory. If it's not possible to create or |
| # change the CWD, the original CWD will be used. The original CWD is |
| # available from support.SAVEDCWD. |
| with support.temp_cwd(TESTCWD, quiet=True): |
| main() |