Doc/perl/l2hinit.perl - platform/external/python/cpython3 - Gitiles

 #LaTeX2HTML Version 96.1 : dot.latex2html-init		-*- perl -*-
 #
 #  Significantly revised by Fred L. Drake, Jr. <fdrake@acm.org> for use
 #  with the Python documentation.
 #
 #  New name to avoid distributing "dot" files with the Python documentation.
 #

 package Override;

 use Cwd qw(getcwd);


 package main;

 $HTML_VERSION = 4.0;

 $MAX_LINK_DEPTH = 2;
 $ADDRESS = '';

 $NO_FOOTNODE = 1;
 $NUMBERED_FOOTNOTES = 1;

 # Python documentation uses section numbers to support references to match
 # in the printed and online versions.
 #
 $SHOW_SECTION_NUMBERS = 1;

 $ICONSERVER = '../icons';

 # Control where the navigation bars should show up:
 $TOP_NAVIGATION = 1;
 $BOTTOM_NAVIGATION = 1;
 $AUTO_NAVIGATION = 0;

 $BODYTEXT = 'bgcolor="#ffffff"';
 $CHILDLINE = "\n<p><hr>\n";
 $VERBOSITY = 0;

 # default # of columns for the indexes
 $INDEX_COLUMNS = 2;
 $MODULE_INDEX_COLUMNS = 4;


 # A little painful, but lets us clean up the top level directory a little,
 # and not be tied to the current directory (as far as I can tell).
 #
 use Cwd;
 use File::Basename;
 ($myname, $mydir, $myext) = fileparse(__FILE__, '\..*');
 chop $mydir;			# remove trailing '/'
 $mydir = getcwd() . "$dd$mydir"
   unless $mydir =~ s|^/|/|;
 $LATEX2HTMLSTYLES = "$mydir$envkey$LATEX2HTMLSTYLES";
 push (@INC, $mydir);

 ($myrootname, $myrootdir, $myext) = fileparse($mydir, '\..*');
 chop $myrootdir;


 # Hackish way to get the appropriate paper-*/ directory into $TEXINPUTS;
 # pass in the paper size (a4 or letter) as the environment variable PAPER
 # to add the right directory.  If not given, the current directory is
 # added instead for use with HOWTO processing.
 #
 if (defined $ENV{'PAPER'}) {
     $mytexinputs = "$myrootdir${dd}paper-$ENV{'PAPER'}$envkey";
 }
 else {
     $mytexinputs = getcwd() . $envkey;
 }
 $mytexinputs .= "$myrootdir${dd}texinputs";


 sub custom_driver_hook{
     #
     # This adds the directory of the main input file to $TEXINPUTS; it
     # seems to be sufficiently general that it should be fine for HOWTO
     # processing.
     #
     my $file = @_[0];
     my($jobname,$dir,$ext) = fileparse($file, '\..*');
     $dir = make_directory_absolute($dir);
     $dir =~ s/$dd$//;
     $TEXINPUTS = "$dir$envkey$mytexinputs";
     print "\nadding $dir to \$TEXINPUTS\n";
 }


 sub set_icon_size{
     my($name, $w, $h) = @_;
     $iconsizes{$name} = "width=$w height=$h";
 }

 foreach $name (split(/ /, 'up next previous contents index modules blank')) {
     set_icon_size($name, 32, 32);
 }
 # The '_motif' is really annoying, and makes the HTML larger with no value
 # added, so strip it off:
 foreach $name (keys %icons) {
     my $icon = $icons{$name};
     # Strip off the wasteful '_motif':
     $icon =~ s/_motif//;
     # Change the greyed-out icons to be blank:
     $icon =~ s/[a-z]*_gr/blank/;
     $icons{$name} = $icon;
 }
 $icons{'blank'} = 'blank.' . $IMAGE_TYPE;

 $CUSTOM_BUTTONS = '';
 $BLANK_ICON = "\n<td>" . img_tag('blank.' . $IMAGE_TYPE) . "</td>";
 $BLANK_ICON =~ s/alt="blank"/alt=""/;
 $NAV_BGCOLOR = " bgcolor=\"#99CCFF\"";

 sub make_nav_sectref{
     my($label,$title) = @_;
     if ($title) {
 	return ("<b class=navlabel>$label:</b> "
 		. "<span class=sectref>$title</span>\n");
     }
     return '';
 }

 sub make_nav_panel{
     my $s;
     $s = "<table align=center width=\"100%\" cellpadding=0 cellspacing=2>"
          . "\n<tr>"
 	 . "\n<td>$NEXT</td>"
 	 . "\n<td>$UP</td>"
 	 . "\n<td>$PREVIOUS</td>"
 	 . "\n<td align=center$NAV_BGCOLOR width=\"100%\">"
 	 . "\n <b class=title>$t_title</b></td>"
 	 . ($CONTENTS ? "\n<td>$CONTENTS</td>" : $BLANK_ICON)
 	 . "\n<td>$CUSTOM_BUTTONS</td>" # module index
 	 . ($INDEX ? "\n<td>$INDEX</td>" : $BLANK_ICON)
 	 . "\n</tr></table>"
 	 #. "<hr>"
 	 . make_nav_sectref("Next", $NEXT_TITLE)
 	 . make_nav_sectref("Up", $UP_TITLE)
 	 . make_nav_sectref("Previous", $PREVIOUS_TITLE);
     $s =~ s/ NAME="tex2html\d+"\n//g;
     return $s;
 }

 sub top_navigation_panel {
     "<div class=navigation>\n"
       . make_nav_panel()
       . '<br><hr></div>';
 }

 sub bot_navigation_panel {
     "<p>\n<div class=navigation><hr>"
       . make_nav_panel()
       . '</div>';
 }

 sub add_link {
     # Returns a pair (iconic link, textual link)
     my($icon, $current_file, @link) = @_;
     my($dummy, $file, $title) = split($delim,
 				      $section_info{join(' ',@link)});
     if ($title && ($file ne $current_file)) {
         $title = purify($title);
 	$title = get_first_words($title, $WORDS_IN_NAVIGATION_PANEL_TITLES);
 	return (make_href($file, $icon), make_href($file, "$title"))
 	}
     elsif ($icon eq $up_visible_mark && $EXTERNAL_UP_LINK) {
  	return (make_href($EXTERNAL_UP_LINK, $icon),
 		make_href($EXTERNAL_UP_LINK, "$EXTERNAL_UP_TITLE"))
 	}
     elsif (($icon eq $previous_visible_mark
 	    || $icon eq $previous_page_visible_mark)
 	   && $EXTERNAL_PREV_LINK && $EXTERNAL_PREV_TITLE) {
 	return (make_href($EXTERNAL_PREV_LINK, $icon),
 		make_href($EXTERNAL_PREV_LINK, "$EXTERNAL_PREV_TITLE"))
 	}
     elsif (($icon eq $next_visible_mark
 	    ||  $icon eq $next_page_visible_mark)
 	   && $EXTERNAL_DOWN_LINK && $EXTERNAL_DOWN_TITLE) {
 	return (make_href($EXTERNAL_DOWN_LINK, $icon),
 		make_href($EXTERNAL_DOWN_LINK, "$EXTERNAL_DOWN_TITLE"))
 	}
     (&inactive_img($icon), "");
 }

 sub add_special_link {
     my($icon, $file, $current_file) = @_;
     (($file && ($file ne $current_file)) ? make_href($file, $icon) : undef)
 }

 sub img_tag {
     local($icon) = @_;
     my $alt;
     my $align = " align=bottom ";

     # having this list hardcoded here is really bogus....
     $alt = join('|', 'up', 'next_group', 'previous_group'
 		, 'next', 'previous', 'change_begin_right', 'change_begin'
 		, 'change_end_right', 'change_end', 'change_delete_right'
 		, 'change_delete', 'contents', 'index', 'modules', 'blank');

     if ($icon =~ /(gif|png)$/) {
 	$used_icons{$icon} = 1;
 	if ($icon =~ /change_(begin|end|delete)_right/) { $align = ' ' };
 	my $nav_border = "$NAV_BORDER";
 	if ($icon =~ /($alt)/) {
 	    $alt = $1;
 	    $alt = ""
 	      if ($alt eq "blank");
 	}
 	else {
 	    $nav_border = '1';
 	    $alt = '[*]';
 	};
 	if ($LOCAL_ICONS) {
 	    return join('', '<img ', $iconsizes{$1}, $align
 			,'border=', $nav_border, ' alt="', $alt
 			,'" src="', $icon, '">' );
 	}
 	return join('', '<img ', $iconsizes{$1}, $align
 		    ,'border=', $nav_border, ' alt="', $alt, "\"\n"
 		    ,' src="', $ICONSERVER, "/$icon", '">' );
     }
     else {
 	return $icon;
     }
 }


 sub do_cmd_arabic {
     # get rid of that nasty <SPAN CLASS="arabic">...</SPAN>
     local($ctr, $val, $id, $_) = &read_counter_value(@_[0]);
     return ($val ? &farabic($val) : "0") . $_;
 }


 sub gen_index_id {
     # this is used to ensure common index key generation and a stable sort
     my($str,$extra) = @_;
     sprintf('%s###%s%010d', $str, $extra, ++$global{'max_id'});
 }

 sub make_index_entry {
     my($br_id,$str) = @_;
     # If TITLE is not yet available (i.e the \index command is in the title of the
     # current section), use $ref_before.
     $TITLE = $ref_before unless $TITLE;
     # Save the reference
     $str = gen_index_id($str, '');
     $index{$str} .= make_half_href("$CURRENT_FILE#$br_id");
     "<a name=\"$br_id\">$anchor_invisible_mark<\/a>";
 }


 sub insert_index{
     my($mark,$datafile,$columns,$letters,$prefix) = @_;
     my $prog = "$myrootdir/tools/buildindex.py";
     my $index;
     if ($letters) {
 	$index = `$prog --columns $columns --letters $datafile`;
     }
     else {
 	$index = `$prog --columns $columns $datafile`;
     }
     s/$mark/$prefix$index/;
 }

 sub add_idx{
     print "\nBuilding HTML for the index ...";
     close(IDXFILE);
     insert_index($idx_mark, 'index.dat', $INDEX_COLUMNS, 1, '');
 }


 $idx_module_mark = '<tex2html_idx_module_mark>';
 $idx_module_title = 'Module Index';

 sub add_module_idx{
     print "\nBuilding HTML for the module index ...";
     my $key;
     my $first = 1;
     my $prevplat = '';
     my $allthesame = 1;
     my $prefix = '';
     foreach $key (keys %Modules) {
 	$key =~ s/<tt>([a-zA-Z0-9._]*)<\/tt>/\1/;
 	my $plat = "$ModulePlatforms{$key}";
 	$plat = ''
 	  if ($plat eq $IGNORE_PLATFORM_ANNOTATION);
 	if (!$first) {
 	    $allthesame = 0
 	      if ($prevplat ne $plat);
 	}
 	else { $first = 0; }
 	$prevplat = $plat;
     }
     open(MODIDXFILE, '>modindex.dat') || die "\n$!\n";
     foreach $key (keys %Modules) {
 	# dump the line in the data file; just use a dummy seqno field
 	my $nkey = $1;
 	my $moditem = "$Modules{$key}";
 	my $plat = '';
 	$key =~ s/<tt>([a-zA-Z0-9._]*)<\/tt>/\1/;
 	if ($ModulePlatforms{$key} && !$allthesame) {
 	    $plat = (" <em>(<span class=platform>$ModulePlatforms{$key}"
 		     . '</span>)</em>');
 	}
 	print MODIDXFILE
 	  $moditem
 	    . $IDXFILE_FIELD_SEP
 	    . "<tt class=module>$key</tt>$plat###\n";
     }
     close(MODIDXFILE);
     if (!$allthesame) {
 	$prefix = <<PLAT_DISCUSS;


 <p> Some module names are followed by an annotation indicating what
 platform they are available on.</p>

 PLAT_DISCUSS
     }
     insert_index($idx_module_mark, 'modindex.dat', $MODULE_INDEX_COLUMNS, 0,
 		 $prefix);
 }

 # replace both indexes as needed:
 sub add_idx_hook{
     add_idx() if (/$idx_mark/);
     add_module_idx() if (/$idx_module_mark/);
     process_python_state();
 }


 # In addition to the standard stuff, add label to allow named node files.
 sub do_cmd_tableofcontents {
     local($_) = @_;
     $TITLE = $toc_title;
     $tocfile = $CURRENT_FILE;
     my($closures,$reopens) = preserve_open_tags();
     anchor_label('contents', $CURRENT_FILE, $_);	# this is added
     join('', "<BR>\n\\tableofchildlinks[off]", $closures
 	 , make_section_heading($toc_title, 'H2'), $toc_mark
 	 , $reopens, $_);
 }
 # In addition to the standard stuff, add label to allow named node files.
 sub do_cmd_listoffigures {
     local($_) = @_;
     $TITLE = $lof_title;
     $loffile = $CURRENT_FILE;
     my($closures,$reopens) = preserve_open_tags();
     anchor_label('lof', $CURRENT_FILE, $_);		# this is added
     join('', "<BR>\n", $closures
 	 , make_section_heading($lof_title, 'H2'), $lof_mark
 	 , $reopens, $_);
 }
 # In addition to the standard stuff, add label to allow named node files.
 sub do_cmd_listoftables {
     local($_) = @_;
     $TITLE = $lot_title;
     $lotfile = $CURRENT_FILE;
     my($closures,$reopens) = preserve_open_tags();
     anchor_label('lot', $CURRENT_FILE, $_);		# this is added
     join('', "<BR>\n", $closures
 	 , make_section_heading($lot_title, 'H2'), $lot_mark
 	 , $reopens, $_);
 }
 # In addition to the standard stuff, add label to allow named node files.
 sub do_cmd_textohtmlinfopage {
     local($_) = @_;
     if ($INFO) {					#
 	anchor_label("about",$CURRENT_FILE,$_);		# this is added
     }							#
     my $the_version = '';				# and the rest is
     if ($t_date) {					# mostly ours
 	$the_version = ",\n$t_date";
 	if ($PYTHON_VERSION) {
 	    $the_version .= ", Release $PYTHON_VERSION";
 	}
     }
     $_ = (($INFO == 1)
       ? join('', $close_all
 	, "<strong>$t_title</strong>$the_version\n"
 	, `cat $myrootdir${dd}html${dd}about.dat`
 	, $open_all, $_)
       : join('', $close_all, $INFO,"\n", $open_all, $_));
     $_;
 }

 # $idx_mark will be replaced with the real index at the end
 sub do_cmd_textohtmlindex {
     local($_) = @_;
     $TITLE = $idx_title;
     $idxfile = $CURRENT_FILE;
     if (%index_labels) { make_index_labels(); }
     if (($SHORT_INDEX) && (%index_segment)) { make_preindex(); }
     else { $preindex = ''; }
     my $heading = make_section_heading($idx_title, 'h2') . $idx_mark;
     my($pre,$post) = minimize_open_tags($heading);
     anchor_label('genindex',$CURRENT_FILE,$_);		# this is added
     '<br>\n' . $pre . $_;
 }

 # $idx_module_mark will be replaced with the real index at the end
 sub do_cmd_textohtmlmoduleindex {
     local($_) = @_;
     $TITLE = $idx_module_title;
     anchor_label("modindex",$CURRENT_FILE,$_);
     '<p>' . make_section_heading($idx_module_title, "h2")
       . $idx_module_mark . $_;
 }

 # The bibliography and the index should be treated as separate sections
 # in their own HTML files. The \bibliography{} command acts as a sectioning command
 # that has the desired effect. But when the bibliography is constructed
 # manually using the thebibliography environment, or when using the
 # theindex environment it is not possible to use the normal sectioning
 # mechanism. This subroutine inserts a \bibliography{} or a dummy
 # \textohtmlindex command just before the appropriate environments
 # to force sectioning.

 # XXX	This *assumes* that if there are two {theindex} environments, the
 #	first is the module index and the second is the standard index.  This
 #	is sufficient for the current Python documentation, but that's about
 #	it.

 sub add_bbl_and_idx_dummy_commands {
     my $id = $global{'max_id'};

     s/([\\]begin\s*$O\d+$C\s*thebibliography)/$bbl_cnt++; $1/eg;
     s/([\\]begin\s*$O\d+$C\s*thebibliography)/$id++; "\\bibliography$O$id$C$O$id$C $1"/geo
       #if ($bbl_cnt == 1)
     ;
     #}
     #----------------------------------------------------------------------
     # (FLD) This was added
     my(@parts) = split(/\\begin\s*$O\d+$C\s*theindex/);
     if (scalar(@parts) == 3) {
 	# Be careful to re-write the string in place, since $_ is *not*
 	# returned explicity;  *** nasty side-effect dependency! ***
 	print "\nadd_bbl_and_idx_dummy_commands ==> adding module index";
 	my $rx = "([\\\\]begin\\s*$O\\d+$C\\s*theindex[\\s\\S]*)"
 	         . "([\\\\]begin\\s*$O\\d+$C\\s*theindex)";
 	s/$rx/\\textohtmlmoduleindex \1 \\textohtmlindex \2/o;
 	# Add a button to the navigation areas:
 	$CUSTOM_BUTTONS .= ("<a\n href=\"modindex.html\">"
 			    . img_tag('modules.'.$IMAGE_TYPE) . "</a>");
     }
     else {
 	$CUSTOM_BUTTONS .= img_tag('blank.' . $IMAGE_TYPE);
 	$global{'max_id'} = $id; # not sure why....
 	s/([\\]begin\s*$O\d+$C\s*theindex)/\\textohtmlindex $1/o;
 	s/[\\]printindex/\\textohtmlindex /o;
     }
     #----------------------------------------------------------------------
     lib_add_bbl_and_idx_dummy_commands()
         if defined(&lib_add_bbl_and_idx_dummy_commands);
 }

 # The bibliographic references, the appendices, the lists of figures and tables
 # etc. must appear in the contents table at the same level as the outermost
 # sectioning command. This subroutine finds what is the outermost level and
 # sets the above to the same level;

 sub set_depth_levels {
     # Sets $outermost_level
     my $level;
     #RRM:  do not alter user-set value for  $MAX_SPLIT_DEPTH
     foreach $level ("part", "chapter", "section", "subsection",
 		    "subsubsection", "paragraph") {
 	last if (($outermost_level) = /\\($level)$delimiter_rx/);
     }
     $level = ($outermost_level ? $section_commands{$outermost_level} :
 	      do {$outermost_level = 'section'; 3;});

     #RRM:  but calculate value for $MAX_SPLIT_DEPTH when a $REL_DEPTH was given
     if ($REL_DEPTH && $MAX_SPLIT_DEPTH) {
 	$MAX_SPLIT_DEPTH = $level + $MAX_SPLIT_DEPTH;
     } elsif (!($MAX_SPLIT_DEPTH)) { $MAX_SPLIT_DEPTH = 1 };

     %unnumbered_section_commands = ('tableofcontents' => $level,
 				    'listoffigures' => $level,
 				    'listoftables' => $level,
 				    'bibliography' => $level,
 				    'textohtmlindex' => $level,
 				    'textohtmlmoduleindex' => $level);
     $section_headings{'textohtmlmoduleindex'} = 'h1';

     %section_commands = (%unnumbered_section_commands,
 			 %section_commands);

     make_sections_rx();
 }


 # Fix from Ross Moore for ']' in \item[...]; this can be removed once the next
 # patch to LaTeX2HTML is released and tested ... if the patch gets included.
 # Be very careful to keep this around, just in case things break again!
 #
 sub protect_useritems {
     local(*_) = @_;
     local($preitems,$thisitem);
     while (/\\item\s*\[/) {
         $preitems .= $`;
 	$_ = $';
         $thisitem = $&.'<<'.++$global{'max_id'}.'>>';
         s/^(((($O|$OP)\d+($C|$CP)).*\3|<[^<>]*>|[^\]<]+)*)\]/$thisitem.=$1;''/e;
         $preitems .= $thisitem . '<<' . $global{'max_id'} . '>>]';
 	s/^]//;
     }
     $_ = $preitems . $_;
 }

 # This changes the markup used for {verbatim} environments, and is the
 # best way I've found that ensures the <dl> goes on the outside of the
 # <pre>...</pre>.
 #
 # Note that this *must* be done in the init file, not the python.perl
 # style support file.  The %declarations must be set before initialize()
 # is called in the main script.
 #
 %declarations = ('preform' => '<dl><dd><pre class=verbatim></pre></dl>',
 		 %declarations);

 1;	# This must be the last line
	#LaTeX2HTML Version 96.1 : dot.latex2html-init -- perl --
	#
	# Significantly revised by Fred L. Drake, Jr. <fdrake@acm.org> for use
	# with the Python documentation.
	#
	# New name to avoid distributing "dot" files with the Python documentation.
	#

	package Override;

	use Cwd qw(getcwd);


	package main;

	$HTML_VERSION = 4.0;

	$MAX_LINK_DEPTH = 2;
	$ADDRESS = '';

	$NO_FOOTNODE = 1;
	$NUMBERED_FOOTNOTES = 1;

	# Python documentation uses section numbers to support references to match
	# in the printed and online versions.
	#
	$SHOW_SECTION_NUMBERS = 1;

	$ICONSERVER = '../icons';

	# Control where the navigation bars should show up:
	$TOP_NAVIGATION = 1;
	$BOTTOM_NAVIGATION = 1;
	$AUTO_NAVIGATION = 0;

	$BODYTEXT = 'bgcolor="#ffffff"';
	$CHILDLINE = "\n<p><hr>\n";
	$VERBOSITY = 0;

	# default # of columns for the indexes
	$INDEX_COLUMNS = 2;
	$MODULE_INDEX_COLUMNS = 4;


	# A little painful, but lets us clean up the top level directory a little,
	# and not be tied to the current directory (as far as I can tell).
	#
	use Cwd;
	use File::Basename;
	($myname, $mydir, $myext) = fileparse(__FILE__, '\..*');
	chop $mydir; # remove trailing '/'
	$mydir = getcwd() . "$dd$mydir"
	unless $mydir =~ s\|^/\|/\|;
	$LATEX2HTMLSTYLES = "$mydir$envkey$LATEX2HTMLSTYLES";
	push (@INC, $mydir);

	($myrootname, $myrootdir, $myext) = fileparse($mydir, '\..*');
	chop $myrootdir;


	# Hackish way to get the appropriate paper-*/ directory into $TEXINPUTS;
	# pass in the paper size (a4 or letter) as the environment variable PAPER
	# to add the right directory. If not given, the current directory is
	# added instead for use with HOWTO processing.
	#
	if (defined $ENV{'PAPER'}) {
	$mytexinputs = "$myrootdir${dd}paper-$ENV{'PAPER'}$envkey";
	}
	else {
	$mytexinputs = getcwd() . $envkey;
	}
	$mytexinputs .= "$myrootdir${dd}texinputs";


	sub custom_driver_hook{
	#
	# This adds the directory of the main input file to $TEXINPUTS; it
	# seems to be sufficiently general that it should be fine for HOWTO
	# processing.
	#
	my $file = @_[0];
	my($jobname,$dir,$ext) = fileparse($file, '\..*');
	$dir = make_directory_absolute($dir);
	$dir =~ s/$dd$//;
	$TEXINPUTS = "$dir$envkey$mytexinputs";
	print "\nadding $dir to \$TEXINPUTS\n";
	}


	sub set_icon_size{
	my($name, $w, $h) = @_;
	$iconsizes{$name} = "width=$w height=$h";
	}

	foreach $name (split(/ /, 'up next previous contents index modules blank')) {
	set_icon_size($name, 32, 32);
	}
	# The '_motif' is really annoying, and makes the HTML larger with no value
	# added, so strip it off:
	foreach $name (keys %icons) {
	my $icon = $icons{$name};
	# Strip off the wasteful '_motif':
	$icon =~ s/_motif//;
	# Change the greyed-out icons to be blank:
	$icon =~ s/[a-z]*_gr/blank/;
	$icons{$name} = $icon;
	}
	$icons{'blank'} = 'blank.' . $IMAGE_TYPE;

	$CUSTOM_BUTTONS = '';
	$BLANK_ICON = "\n<td>" . img_tag('blank.' . $IMAGE_TYPE) . "</td>";
	$BLANK_ICON =~ s/alt="blank"/alt=""/;
	$NAV_BGCOLOR = " bgcolor=\"#99CCFF\"";

	sub make_nav_sectref{
	my($label,$title) = @_;
	if ($title) {
	return ("<b class=navlabel>$label:</b> "
	. "<span class=sectref>$title</span>\n");
	}
	return '';
	}

	sub make_nav_panel{
	my $s;
	$s = "<table align=center width=\"100%\" cellpadding=0 cellspacing=2>"
	. "\n<tr>"
	. "\n<td>$NEXT</td>"
	. "\n<td>$UP</td>"
	. "\n<td>$PREVIOUS</td>"
	. "\n<td align=center$NAV_BGCOLOR width=\"100%\">"
	. "\n <b class=title>$t_title</b></td>"
	. ($CONTENTS ? "\n<td>$CONTENTS</td>" : $BLANK_ICON)
	. "\n<td>$CUSTOM_BUTTONS</td>" # module index
	. ($INDEX ? "\n<td>$INDEX</td>" : $BLANK_ICON)
	. "\n</tr></table>"
	#. "<hr>"
	. make_nav_sectref("Next", $NEXT_TITLE)
	. make_nav_sectref("Up", $UP_TITLE)
	. make_nav_sectref("Previous", $PREVIOUS_TITLE);
	$s =~ s/ NAME="tex2html\d+"\n//g;
	return $s;
	}

	sub top_navigation_panel {
	"<div class=navigation>\n"
	. make_nav_panel()
	. '<br><hr></div>';
	}

	sub bot_navigation_panel {
	"<p>\n<div class=navigation><hr>"
	. make_nav_panel()
	. '</div>';
	}

	sub add_link {
	# Returns a pair (iconic link, textual link)
	my($icon, $current_file, @link) = @_;
	my($dummy, $file, $title) = split($delim,
	$section_info{join(' ',@link)});
	if ($title && ($file ne $current_file)) {
	$title = purify($title);
	$title = get_first_words($title, $WORDS_IN_NAVIGATION_PANEL_TITLES);
	return (make_href($file, $icon), make_href($file, "$title"))
	}
	elsif ($icon eq $up_visible_mark && $EXTERNAL_UP_LINK) {
	return (make_href($EXTERNAL_UP_LINK, $icon),
	make_href($EXTERNAL_UP_LINK, "$EXTERNAL_UP_TITLE"))
	}
	elsif (($icon eq $previous_visible_mark
	\|\| $icon eq $previous_page_visible_mark)
	&& $EXTERNAL_PREV_LINK && $EXTERNAL_PREV_TITLE) {
	return (make_href($EXTERNAL_PREV_LINK, $icon),
	make_href($EXTERNAL_PREV_LINK, "$EXTERNAL_PREV_TITLE"))
	}
	elsif (($icon eq $next_visible_mark
	\|\| $icon eq $next_page_visible_mark)
	&& $EXTERNAL_DOWN_LINK && $EXTERNAL_DOWN_TITLE) {
	return (make_href($EXTERNAL_DOWN_LINK, $icon),
	make_href($EXTERNAL_DOWN_LINK, "$EXTERNAL_DOWN_TITLE"))
	}
	(&inactive_img($icon), "");
	}

	sub add_special_link {
	my($icon, $file, $current_file) = @_;
	(($file && ($file ne $current_file)) ? make_href($file, $icon) : undef)
	}

	sub img_tag {
	local($icon) = @_;
	my $alt;
	my $align = " align=bottom ";

	# having this list hardcoded here is really bogus....
	$alt = join('\|', 'up', 'next_group', 'previous_group'
	, 'next', 'previous', 'change_begin_right', 'change_begin'
	, 'change_end_right', 'change_end', 'change_delete_right'
	, 'change_delete', 'contents', 'index', 'modules', 'blank');

	if ($icon =~ /(gif\|png)$/) {
	$used_icons{$icon} = 1;
	if ($icon =~ /change_(begin\|end\|delete)_right/) { $align = ' ' };
	my $nav_border = "$NAV_BORDER";
	if ($icon =~ /($alt)/) {
	$alt = $1;
	$alt = ""
	if ($alt eq "blank");
	}
	else {
	$nav_border = '1';
	$alt = '[*]';
	};
	if ($LOCAL_ICONS) {
	return join('', '<img ', $iconsizes{$1}, $align
	,'border=', $nav_border, ' alt="', $alt
	,'" src="', $icon, '">' );
	}
	return join('', '<img ', $iconsizes{$1}, $align
	,'border=', $nav_border, ' alt="', $alt, "\"\n"
	,' src="', $ICONSERVER, "/$icon", '">' );
	}
	else {
	return $icon;
	}
	}


	sub do_cmd_arabic {
	# get rid of that nasty <SPAN CLASS="arabic">...</SPAN>
	local($ctr, $val, $id, $_) = &read_counter_value(@_[0]);
	return ($val ? &farabic($val) : "0") . $_;
	}


	sub gen_index_id {
	# this is used to ensure common index key generation and a stable sort
	my($str,$extra) = @_;
	sprintf('%s###%s%010d', $str, $extra, ++$global{'max_id'});
	}

	sub make_index_entry {
	my($br_id,$str) = @_;
	# If TITLE is not yet available (i.e the \index command is in the title of the
	# current section), use $ref_before.
	$TITLE = $ref_before unless $TITLE;
	# Save the reference
	$str = gen_index_id($str, '');
	$index{$str} .= make_half_href("$CURRENT_FILE#$br_id");
	"<a name=\"$br_id\">$anchor_invisible_mark<\/a>";
	}


	sub insert_index{
	my($mark,$datafile,$columns,$letters,$prefix) = @_;
	my $prog = "$myrootdir/tools/buildindex.py";
	my $index;
	if ($letters) {
	$index = `$prog --columns $columns --letters $datafile`;
	}
	else {
	$index = `$prog --columns $columns $datafile`;
	}
	s/$mark/$prefix$index/;
	}

	sub add_idx{
	print "\nBuilding HTML for the index ...";
	close(IDXFILE);
	insert_index($idx_mark, 'index.dat', $INDEX_COLUMNS, 1, '');
	}


	$idx_module_mark = '<tex2html_idx_module_mark>';
	$idx_module_title = 'Module Index';

	sub add_module_idx{
	print "\nBuilding HTML for the module index ...";
	my $key;
	my $first = 1;
	my $prevplat = '';
	my $allthesame = 1;
	my $prefix = '';
	foreach $key (keys %Modules) {
	$key =~ s/<tt>([a-zA-Z0-9._]*)<\/tt>/\1/;
	my $plat = "$ModulePlatforms{$key}";
	$plat = ''
	if ($plat eq $IGNORE_PLATFORM_ANNOTATION);
	if (!$first) {
	$allthesame = 0
	if ($prevplat ne $plat);
	}
	else { $first = 0; }
	$prevplat = $plat;
	}
	open(MODIDXFILE, '>modindex.dat') \|\| die "\n$!\n";
	foreach $key (keys %Modules) {
	# dump the line in the data file; just use a dummy seqno field
	my $nkey = $1;
	my $moditem = "$Modules{$key}";
	my $plat = '';
	$key =~ s/<tt>([a-zA-Z0-9._]*)<\/tt>/\1/;
	if ($ModulePlatforms{$key} && !$allthesame) {
	$plat = (" <em>(<span class=platform>$ModulePlatforms{$key}"
	. '</span>)</em>');
	}
	print MODIDXFILE
	$moditem
	. $IDXFILE_FIELD_SEP
	. "<tt class=module>$key</tt>$plat###\n";
	}
	close(MODIDXFILE);
	if (!$allthesame) {
	$prefix = <<PLAT_DISCUSS;


	<p> Some module names are followed by an annotation indicating what
	platform they are available on.</p>

	PLAT_DISCUSS
	}
	insert_index($idx_module_mark, 'modindex.dat', $MODULE_INDEX_COLUMNS, 0,
	$prefix);
	}

	# replace both indexes as needed:
	sub add_idx_hook{
	add_idx() if (/$idx_mark/);
	add_module_idx() if (/$idx_module_mark/);
	process_python_state();
	}


	# In addition to the standard stuff, add label to allow named node files.
	sub do_cmd_tableofcontents {
	local($_) = @_;
	$TITLE = $toc_title;
	$tocfile = $CURRENT_FILE;
	my($closures,$reopens) = preserve_open_tags();
	anchor_label('contents', $CURRENT_FILE, $_); # this is added
	join('', "<BR>\n\\tableofchildlinks[off]", $closures
	, make_section_heading($toc_title, 'H2'), $toc_mark
	, $reopens, $_);
	}
	# In addition to the standard stuff, add label to allow named node files.
	sub do_cmd_listoffigures {
	local($_) = @_;
	$TITLE = $lof_title;
	$loffile = $CURRENT_FILE;
	my($closures,$reopens) = preserve_open_tags();
	anchor_label('lof', $CURRENT_FILE, $_); # this is added
	join('', "<BR>\n", $closures
	, make_section_heading($lof_title, 'H2'), $lof_mark
	, $reopens, $_);
	}
	# In addition to the standard stuff, add label to allow named node files.
	sub do_cmd_listoftables {
	local($_) = @_;
	$TITLE = $lot_title;
	$lotfile = $CURRENT_FILE;
	my($closures,$reopens) = preserve_open_tags();
	anchor_label('lot', $CURRENT_FILE, $_); # this is added
	join('', "<BR>\n", $closures
	, make_section_heading($lot_title, 'H2'), $lot_mark
	, $reopens, $_);
	}
	# In addition to the standard stuff, add label to allow named node files.
	sub do_cmd_textohtmlinfopage {
	local($_) = @_;
	if ($INFO) { #
	anchor_label("about",$CURRENT_FILE,$_); # this is added
	} #
	my $the_version = ''; # and the rest is
	if ($t_date) { # mostly ours
	$the_version = ",\n$t_date";
	if ($PYTHON_VERSION) {
	$the_version .= ", Release $PYTHON_VERSION";
	}
	}
	$_ = (($INFO == 1)
	? join('', $close_all
	, "<strong>$t_title</strong>$the_version\n"
	, `cat $myrootdir${dd}html${dd}about.dat`
	, $open_all, $_)
	: join('', $close_all, $INFO,"\n", $open_all, $_));
	$_;
	}

	# $idx_mark will be replaced with the real index at the end
	sub do_cmd_textohtmlindex {
	local($_) = @_;
	$TITLE = $idx_title;
	$idxfile = $CURRENT_FILE;
	if (%index_labels) { make_index_labels(); }
	if (($SHORT_INDEX) && (%index_segment)) { make_preindex(); }
	else { $preindex = ''; }
	my $heading = make_section_heading($idx_title, 'h2') . $idx_mark;
	my($pre,$post) = minimize_open_tags($heading);
	anchor_label('genindex',$CURRENT_FILE,$_); # this is added
	'<br>\n' . $pre . $_;
	}

	# $idx_module_mark will be replaced with the real index at the end
	sub do_cmd_textohtmlmoduleindex {
	local($_) = @_;
	$TITLE = $idx_module_title;
	anchor_label("modindex",$CURRENT_FILE,$_);
	'<p>' . make_section_heading($idx_module_title, "h2")
	. $idx_module_mark . $_;
	}

	# The bibliography and the index should be treated as separate sections
	# in their own HTML files. The \bibliography{} command acts as a sectioning command
	# that has the desired effect. But when the bibliography is constructed
	# manually using the thebibliography environment, or when using the
	# theindex environment it is not possible to use the normal sectioning
	# mechanism. This subroutine inserts a \bibliography{} or a dummy
	# \textohtmlindex command just before the appropriate environments
	# to force sectioning.

	# XXX This assumes that if there are two {theindex} environments, the
	# first is the module index and the second is the standard index. This
	# is sufficient for the current Python documentation, but that's about
	# it.

	sub add_bbl_and_idx_dummy_commands {
	my $id = $global{'max_id'};

	s/([\\]begin\s$O\d+$C\sthebibliography)/$bbl_cnt++; $1/eg;
	s/([\\]begin\s$O\d+$C\sthebibliography)/$id++; "\\bibliography$O$id$C$O$id$C $1"/geo
	#if ($bbl_cnt == 1)
	;
	#}
	#----------------------------------------------------------------------
	# (FLD) This was added
	my(@parts) = split(/\\begin\s$O\d+$C\stheindex/);
	if (scalar(@parts) == 3) {
	# Be careful to re-write the string in place, since $_ is not
	# returned explicity; * nasty side-effect dependency! *
	print "\nadd_bbl_and_idx_dummy_commands ==> adding module index";
	my $rx = "([\\\\]begin\\s$O\\d+$C\\stheindex[\\s\\S]*)"
	. "([\\\\]begin\\s$O\\d+$C\\stheindex)";
	s/$rx/\\textohtmlmoduleindex \1 \\textohtmlindex \2/o;
	# Add a button to the navigation areas:
	$CUSTOM_BUTTONS .= ("<a\n href=\"modindex.html\">"
	. img_tag('modules.'.$IMAGE_TYPE) . "</a>");
	}
	else {
	$CUSTOM_BUTTONS .= img_tag('blank.' . $IMAGE_TYPE);
	$global{'max_id'} = $id; # not sure why....
	s/([\\]begin\s$O\d+$C\stheindex)/\\textohtmlindex $1/o;
	s/[\\]printindex/\\textohtmlindex /o;
	}
	#----------------------------------------------------------------------
	lib_add_bbl_and_idx_dummy_commands()
	if defined(&lib_add_bbl_and_idx_dummy_commands);
	}

	# The bibliographic references, the appendices, the lists of figures and tables
	# etc. must appear in the contents table at the same level as the outermost
	# sectioning command. This subroutine finds what is the outermost level and
	# sets the above to the same level;

	sub set_depth_levels {
	# Sets $outermost_level
	my $level;
	#RRM: do not alter user-set value for $MAX_SPLIT_DEPTH
	foreach $level ("part", "chapter", "section", "subsection",
	"subsubsection", "paragraph") {
	last if (($outermost_level) = /\\($level)$delimiter_rx/);
	}
	$level = ($outermost_level ? $section_commands{$outermost_level} :
	do {$outermost_level = 'section'; 3;});

	#RRM: but calculate value for $MAX_SPLIT_DEPTH when a $REL_DEPTH was given
	if ($REL_DEPTH && $MAX_SPLIT_DEPTH) {
	$MAX_SPLIT_DEPTH = $level + $MAX_SPLIT_DEPTH;
	} elsif (!($MAX_SPLIT_DEPTH)) { $MAX_SPLIT_DEPTH = 1 };

	%unnumbered_section_commands = ('tableofcontents' => $level,
	'listoffigures' => $level,
	'listoftables' => $level,
	'bibliography' => $level,
	'textohtmlindex' => $level,
	'textohtmlmoduleindex' => $level);
	$section_headings{'textohtmlmoduleindex'} = 'h1';

	%section_commands = (%unnumbered_section_commands,
	%section_commands);

	make_sections_rx();
	}


	# Fix from Ross Moore for ']' in \item[...]; this can be removed once the next
	# patch to LaTeX2HTML is released and tested ... if the patch gets included.
	# Be very careful to keep this around, just in case things break again!
	#
	sub protect_useritems {
	local(*_) = @_;
	local($preitems,$thisitem);
	while (/\\item\s*\[/) {
	$preitems .= $`;
	$_ = $';
	$thisitem = $&.'<<'.++$global{'max_id'}.'>>';
	s/^(((($O\|$OP)\d+($C\|$CP)).\3\|<[^<>]>\|[^\]<]+)*)\]/$thisitem.=$1;''/e;
	$preitems .= $thisitem . '<<' . $global{'max_id'} . '>>]';
	s/^]//;
	}
	$_ = $preitems . $_;
	}

	# This changes the markup used for {verbatim} environments, and is the
	# best way I've found that ensures the <dl> goes on the outside of the
	# <pre>...</pre>.
	#
	# Note that this must be done in the init file, not the python.perl
	# style support file. The %declarations must be set before initialize()
	# is called in the main script.
	#
	%declarations = ('preform' => '<dl><dd><pre class=verbatim></pre></dl>',
	%declarations);

	1; # This must be the last line