diff --git a/Doc/library/codecs.rst b/Doc/library/codecs.rst
index a6c0df1..71bf25a 100644
--- a/Doc/library/codecs.rst
+++ b/Doc/library/codecs.rst
@@ -760,7 +760,7 @@
 
 Unicode strings are stored internally as sequences of codepoints (to be precise
 as :ctype:`Py_UNICODE` arrays). Depending on the way Python is compiled (either
-via :option:`--enable-unicode=ucs2` or :option:`--enable-unicode=ucs4`, with the
+via ``--enable-unicode=ucs2`` or ``--enable-unicode=ucs4``, with the
 former being the default) :ctype:`Py_UNICODE` is either a 16-bit or 32-bit data
 type. Once a Unicode object is used outside of CPU and memory, CPU endianness
 and how these arrays are stored as bytes become an issue.  Transforming a
diff --git a/Doc/library/compileall.rst b/Doc/library/compileall.rst
index 86f60fb..ac0feb7 100644
--- a/Doc/library/compileall.rst
+++ b/Doc/library/compileall.rst
@@ -11,14 +11,51 @@
 allowing users without permission to write to the libraries to take advantage of
 cached byte-code files.
 
-This module may also be used as a script (using the :option:`-m` Python flag) to
-compile Python sources.  Directories to recursively traverse (passing
-:option:`-l` stops the recursive behavior) for sources are listed on the command
-line.  If no arguments are given, the invocation is equivalent to ``-l
-sys.path``.  Printing lists of the files compiled can be disabled with the
-:option:`-q` flag.  In addition, the :option:`-x` option takes a regular
-expression argument.  All files that match the expression will be skipped.
 
+Command-line use
+----------------
+
+This module can work as a script (using :program:`python -m compileall`) to
+compile Python sources.
+
+.. program:: compileall
+
+.. cmdoption:: [directory|file]...
+
+   Positional arguments are files to compile or directories that contain
+   source files, traversed recursively.  If no argument is given, behave as if
+   the command line was ``-l <directories from sys.path>``.
+
+.. cmdoption:: -l
+
+   Do not recurse.
+
+.. cmdoption:: -f
+
+   Force rebuild even if timestamps are up-to-date.
+
+.. cmdoption:: -q
+
+   Do not print the list of files compiled.
+
+.. cmdoption:: -d destdir
+
+   Purported directory name for error messages.
+
+.. cmdoption:: -x regex
+
+   Skip files with a full path that matches given regular expression.
+
+.. cmdoption:: -i list
+
+   Expand list with its content (file and directory names).
+
+.. versionadded:: 2.7
+   The ``-i``  option.
+
+
+Public functions
+----------------
 
 .. function:: compile_dir(dir[, maxlevels[, ddir[, force[,  rx[, quiet]]]]])
 
@@ -35,7 +72,6 @@
    If *quiet* is true, nothing is printed to the standard output in normal
    operation.
 
-
 .. function:: compile_path([skip_curdir[, maxlevels[, force]]])
 
    Byte-compile all the :file:`.py` files found along ``sys.path``. If
@@ -59,4 +95,3 @@
 
    Module :mod:`py_compile`
       Byte-compile a single source file.
-
diff --git a/Doc/library/doctest.rst b/Doc/library/doctest.rst
index 5ca38c4..00012ea 100644
--- a/Doc/library/doctest.rst
+++ b/Doc/library/doctest.rst
@@ -95,7 +95,7 @@
    $
 
 There's no output!  That's normal, and it means all the examples worked.  Pass
-:option:`-v` to the script, and :mod:`doctest` prints a detailed log of what
+``-v`` to the script, and :mod:`doctest` prints a detailed log of what
 it's trying, and prints a summary at the end::
 
    $ python example.py -v
@@ -163,7 +163,7 @@
 final line of output is ``***Test Failed*** N failures.``, where *N* is the
 number of examples that failed.
 
-Run it with the :option:`-v` switch instead::
+Run it with the ``-v`` switch instead::
 
    python M.py -v
 
@@ -172,7 +172,7 @@
 
 You can force verbose mode by passing ``verbose=True`` to :func:`testmod`, or
 prohibit it by passing ``verbose=False``.  In either of those cases,
-``sys.argv`` is not examined by :func:`testmod` (so passing :option:`-v` or not
+``sys.argv`` is not examined by :func:`testmod` (so passing ``-v`` or not
 has no effect).
 
 Since Python 2.6, there is also a command line shortcut for running
@@ -242,7 +242,7 @@
 that can be used to tell it to look for files in other locations.
 
 Like :func:`testmod`, :func:`testfile`'s verbosity can be set with the
-:option:`-v` command-line switch or with the optional keyword argument
+``-v`` command-line switch or with the optional keyword argument
 *verbose*.
 
 Since Python 2.6, there is also a command line shortcut for running
@@ -1453,7 +1453,7 @@
    verbosity.  If *verbose* is ``True``, then information is printed about each
    example, as it is run.  If *verbose* is ``False``, then only failures are
    printed.  If *verbose* is unspecified, or ``None``, then verbose output is used
-   iff the command-line switch :option:`-v` is used.
+   iff the command-line switch ``-v`` is used.
 
    The optional keyword argument *optionflags* can be used to control how the test
    runner compares expected output to actual output, and how it displays failures.
diff --git a/Doc/library/exceptions.rst b/Doc/library/exceptions.rst
index 2f07d29..7e94c0c 100644
--- a/Doc/library/exceptions.rst
+++ b/Doc/library/exceptions.rst
@@ -141,7 +141,7 @@
 
    Raised when a floating point operation fails.  This exception is always defined,
    but can only be raised when Python is configured with the
-   :option:`--with-fpectl` option, or the :const:`WANT_SIGFPE_HANDLER` symbol is
+   ``--with-fpectl`` option, or the :const:`WANT_SIGFPE_HANDLER` symbol is
    defined in the :file:`pyconfig.h` file.
 
 
diff --git a/Doc/library/getopt.rst b/Doc/library/getopt.rst
index 3114a82..4d65c79 100644
--- a/Doc/library/getopt.rst
+++ b/Doc/library/getopt.rst
@@ -41,14 +41,14 @@
       non-GNU Unix systems work.
 
    *long_options*, if specified, must be a list of strings with the names of the
-   long options which should be supported.  The leading ``'-``\ ``-'``
+   long options which should be supported.  The leading ``'--'``
    characters should not be included in the option name.  Long options which
    require an argument should be followed by an equal sign (``'='``).  Optional
    arguments are not supported.  To accept only long options, *options* should
    be an empty string.  Long options on the command line can be recognized so
    long as they provide a prefix of the option name that matches exactly one of
    the accepted options.  For example, if *long_options* is ``['foo', 'frob']``,
-   the option :option:`--fo` will match as :option:`--foo`, but :option:`--f`
+   the option ``--fo`` will match as ``--foo``, but ``--f``
    will not match uniquely, so :exc:`GetoptError` will be raised.
 
    The return value consists of two elements: the first is a list of ``(option,
@@ -56,7 +56,7 @@
    option list was stripped (this is a trailing slice of *args*).  Each
    option-and-value pair returned has the option as its first element, prefixed
    with a hyphen for short options (e.g., ``'-x'``) or two hyphens for long
-   options (e.g., ``'-``\ ``-long-option'``), and the option argument as its
+   options (e.g., ``'--long-option'``), and the option argument as its
    second element, or an empty string if the option has no argument.  The
    options occur in the list in the same order in which they were found, thus
    allowing multiple occurrences.  Long and short options may be mixed.
@@ -69,7 +69,7 @@
    intermixed. The :func:`getopt` function stops processing options as soon as a
    non-option argument is encountered.
 
-   If the first character of the option string is '+', or if the environment
+   If the first character of the option string is ``'+'``, or if the environment
    variable :envvar:`POSIXLY_CORRECT` is set, then option processing stops as
    soon as a non-option argument is encountered.
 
diff --git a/Doc/library/idle.rst b/Doc/library/idle.rst
index 1b78fb9..6bd1898 100644
--- a/Doc/library/idle.rst
+++ b/Doc/library/idle.rst
@@ -286,13 +286,13 @@
 
 If there are arguments:
 
-#. If :option:`-e` is used, arguments are files opened for editing and
+#. If ``-e`` is used, arguments are files opened for editing and
    ``sys.argv`` reflects the arguments passed to IDLE itself.
 
-#. Otherwise, if :option:`-c` is used, all arguments are placed in
+#. Otherwise, if ``-c`` is used, all arguments are placed in
    ``sys.argv[1:...]``, with ``sys.argv[0]`` set to ``'-c'``.
 
-#. Otherwise, if neither :option:`-e` nor :option:`-c` is used, the first
+#. Otherwise, if neither ``-e`` nor ``-c`` is used, the first
    argument is a script which is executed with the remaining arguments in
    ``sys.argv[1:...]``  and ``sys.argv[0]`` set to the script name.  If the script
    name is '-', no script is executed but an interactive Python session is started;
diff --git a/Doc/library/optparse.rst b/Doc/library/optparse.rst
index 2824a26..d2f7b83 100644
--- a/Doc/library/optparse.rst
+++ b/Doc/library/optparse.rst
@@ -107,26 +107,26 @@
    an argument used to supply extra information to guide or customize the
    execution of a program.  There are many different syntaxes for options; the
    traditional Unix syntax is a hyphen ("-") followed by a single letter,
-   e.g. ``"-x"`` or ``"-F"``.  Also, traditional Unix syntax allows multiple
-   options to be merged into a single argument, e.g.  ``"-x -F"`` is equivalent
-   to ``"-xF"``.  The GNU project introduced ``"--"`` followed by a series of
-   hyphen-separated words, e.g.  ``"--file"`` or ``"--dry-run"``.  These are the
+   e.g. ``-x`` or ``-F``.  Also, traditional Unix syntax allows multiple
+   options to be merged into a single argument, e.g. ``-x -F`` is equivalent
+   to ``-xF``.  The GNU project introduced ``--`` followed by a series of
+   hyphen-separated words, e.g. ``--file`` or ``--dry-run``.  These are the
    only two option syntaxes provided by :mod:`optparse`.
 
    Some other option syntaxes that the world has seen include:
 
-   * a hyphen followed by a few letters, e.g. ``"-pf"`` (this is *not* the same
+   * a hyphen followed by a few letters, e.g. ``-pf`` (this is *not* the same
      as multiple options merged into a single argument)
 
-   * a hyphen followed by a whole word, e.g. ``"-file"`` (this is technically
+   * a hyphen followed by a whole word, e.g. ``-file`` (this is technically
      equivalent to the previous syntax, but they aren't usually seen in the same
      program)
 
    * a plus sign followed by a single letter, or a few letters, or a word, e.g.
-     ``"+f"``, ``"+rgb"``
+     ``+f``, ``+rgb``
 
-   * a slash followed by a letter, or a few letters, or a word, e.g. ``"/f"``,
-     ``"/file"``
+   * a slash followed by a letter, or a few letters, or a word, e.g. ``/f``,
+     ``/file``
 
    These option syntaxes are not supported by :mod:`optparse`, and they never
    will be.  This is deliberate: the first three are non-standard on any
@@ -154,9 +154,9 @@
    Typically, a given option either takes an argument or it doesn't. Lots of
    people want an "optional option arguments" feature, meaning that some options
    will take an argument if they see it, and won't if they don't.  This is
-   somewhat controversial, because it makes parsing ambiguous: if ``"-a"`` takes
-   an optional argument and ``"-b"`` is another option entirely, how do we
-   interpret ``"-ab"``?  Because of this ambiguity, :mod:`optparse` does not
+   somewhat controversial, because it makes parsing ambiguous: if ``-a`` takes
+   an optional argument and ``-b`` is another option entirely, how do we
+   interpret ``-ab``?  Because of this ambiguity, :mod:`optparse` does not
    support this feature.
 
 positional argument
@@ -174,9 +174,9 @@
 
    prog -v --report /tmp/report.txt foo bar
 
-``"-v"`` and ``"--report"`` are both options.  Assuming that :option:`--report`
-takes one argument, ``"/tmp/report.txt"`` is an option argument.  ``"foo"`` and
-``"bar"`` are positional arguments.
+``-v`` and ``--report`` are both options.  Assuming that ``--report``
+takes one argument, ``/tmp/report.txt`` is an option argument.  ``foo`` and
+``bar`` are positional arguments.
 
 
 .. _optparse-what-options-for:
@@ -261,7 +261,7 @@
    parser.add_option(opt_str, ...,
                      attr=value, ...)
 
-Each option has one or more option strings, such as ``"-f"`` or ``"--file"``,
+Each option has one or more option strings, such as ``-f`` or ``--file``,
 and several option attributes that tell :mod:`optparse` what to expect and what
 to do when it encounters that option on the command line.
 
@@ -290,7 +290,7 @@
 :meth:`parse_args` returns two values:
 
 * ``options``, an object containing values for all of your options---e.g. if
-  ``"--file"`` takes a single string argument, then ``options.file`` will be the
+  ``--file`` takes a single string argument, then ``options.file`` will be the
   filename supplied by the user, or ``None`` if the user did not supply that
   option
 
@@ -336,8 +336,8 @@
    args = ["-f", "foo.txt"]
    (options, args) = parser.parse_args(args)
 
-When :mod:`optparse` sees the option string ``"-f"``, it consumes the next
-argument, ``"foo.txt"``, and stores it in ``options.filename``.  So, after this
+When :mod:`optparse` sees the option string ``-f``, it consumes the next
+argument, ``foo.txt``, and stores it in ``options.filename``.  So, after this
 call to :meth:`parse_args`, ``options.filename`` is ``"foo.txt"``.
 
 Some other option types supported by :mod:`optparse` are ``int`` and ``float``.
@@ -349,13 +349,13 @@
 Also, there's no explicit action, since the default is ``store``.
 
 Let's parse another fake command-line.  This time, we'll jam the option argument
-right up against the option: since ``"-n42"`` (one argument) is equivalent to
-``"-n 42"`` (two arguments), the code ::
+right up against the option: since ``-n42`` (one argument) is equivalent to
+``-n 42`` (two arguments), the code ::
 
    (options, args) = parser.parse_args(["-n42"])
    print options.num
 
-will print ``"42"``.
+will print ``42``.
 
 If you don't specify a type, :mod:`optparse` assumes ``string``.  Combined with
 the fact that the default action is ``store``, that means our first example can
@@ -365,9 +365,9 @@
 
 If you don't supply a destination, :mod:`optparse` figures out a sensible
 default from the option strings: if the first long option string is
-``"--foo-bar"``, then the default destination is ``foo_bar``.  If there are no
+``--foo-bar``, then the default destination is ``foo_bar``.  If there are no
 long option strings, :mod:`optparse` looks at the first short option string: the
-default destination for ``"-f"`` is ``f``.
+default destination for ``-f`` is ``f``.
 
 :mod:`optparse` also includes built-in ``long`` and ``complex`` types.  Adding
 types is covered in section :ref:`optparse-extending-optparse`.
@@ -381,7 +381,7 @@
 Flag options---set a variable to true or false when a particular option is seen
 ---are quite common.  :mod:`optparse` supports them with two separate actions,
 ``store_true`` and ``store_false``.  For example, you might have a ``verbose``
-flag that is turned on with ``"-v"`` and off with ``"-q"``::
+flag that is turned on with ``-v`` and off with ``-q``::
 
    parser.add_option("-v", action="store_true", dest="verbose")
    parser.add_option("-q", action="store_false", dest="verbose")
@@ -390,8 +390,8 @@
 OK.  (It just means you have to be a bit careful when setting default values---
 see below.)
 
-When :mod:`optparse` encounters ``"-v"`` on the command line, it sets
-``options.verbose`` to ``True``; when it encounters ``"-q"``,
+When :mod:`optparse` encounters ``-v`` on the command line, it sets
+``options.verbose`` to ``True``; when it encounters ``-q``,
 ``options.verbose`` is set to ``False``.
 
 
@@ -431,7 +431,7 @@
 command line is parsed.
 
 First, consider the verbose/quiet example.  If we want :mod:`optparse` to set
-``verbose`` to ``True`` unless ``"-q"`` is seen, then we can do this::
+``verbose`` to ``True`` unless ``-q`` is seen, then we can do this::
 
    parser.add_option("-v", action="store_true", dest="verbose", default=True)
    parser.add_option("-q", action="store_false", dest="verbose")
@@ -489,7 +489,7 @@
                      help="interaction mode: novice, intermediate, "
                           "or expert [default: %default]")
 
-If :mod:`optparse` encounters either ``"-h"`` or ``"--help"`` on the
+If :mod:`optparse` encounters either ``-h`` or ``--help`` on the
 command-line, or if you just call :meth:`parser.print_help`, it prints the
 following to standard output:
 
@@ -516,7 +516,7 @@
 
      usage = "usage: %prog [options] arg1 arg2"
 
-  :mod:`optparse` expands ``"%prog"`` in the usage string to the name of the
+  :mod:`optparse` expands ``%prog`` in the usage string to the name of the
   current program, i.e. ``os.path.basename(sys.argv[0])``.  The expanded string
   is then printed before the detailed option help.
 
@@ -534,17 +534,17 @@
      -m MODE, --mode=MODE
 
   Here, "MODE" is called the meta-variable: it stands for the argument that the
-  user is expected to supply to :option:`-m`/:option:`--mode`.  By default,
+  user is expected to supply to ``-m``/``--mode``.  By default,
   :mod:`optparse` converts the destination variable name to uppercase and uses
   that for the meta-variable.  Sometimes, that's not what you want---for
-  example, the :option:`--filename` option explicitly sets ``metavar="FILE"``,
+  example, the ``--filename`` option explicitly sets ``metavar="FILE"``,
   resulting in this automatically-generated option description::
 
      -f FILE, --filename=FILE
 
   This is important for more than just saving space, though: the manually
-  written help text uses the meta-variable "FILE" to clue the user in that
-  there's a connection between the semi-formal syntax "-f FILE" and the informal
+  written help text uses the meta-variable ``FILE`` to clue the user in that
+  there's a connection between the semi-formal syntax ``-f FILE`` and the informal
   semantic description "write output to FILE". This is a simple but effective
   way to make your help text a lot clearer and more useful for end users.
 
@@ -597,11 +597,11 @@
 
    parser = OptionParser(usage="%prog [-f] [-q]", version="%prog 1.0")
 
-``"%prog"`` is expanded just like it is in ``usage``.  Apart from that,
+``%prog`` is expanded just like it is in ``usage``.  Apart from that,
 ``version`` can contain anything you like.  When you supply it, :mod:`optparse`
-automatically adds a ``"--version"`` option to your parser. If it encounters
+automatically adds a ``--version`` option to your parser. If it encounters
 this option on the command line, it expands your ``version`` string (by
-replacing ``"%prog"``), prints it to stdout, and exits.
+replacing ``%prog``), prints it to stdout, and exits.
 
 For example, if your script is called ``/usr/bin/foo``::
 
@@ -614,7 +614,7 @@
 
    Print the version message for the current program (``self.version``) to
    *file* (default stdout).  As with :meth:`print_usage`, any occurrence
-   of ``"%prog"`` in ``self.version`` is replaced with the name of the current
+   of ``%prog`` in ``self.version`` is replaced with the name of the current
    program.  Does nothing if ``self.version`` is empty or undefined.
 
 .. method:: OptionParser.get_version()
@@ -637,9 +637,9 @@
 
 Handling user errors is much more important, since they are guaranteed to happen
 no matter how stable your code is.  :mod:`optparse` can automatically detect
-some user errors, such as bad option arguments (passing ``"-n 4x"`` where
-:option:`-n` takes an integer argument), missing arguments (``"-n"`` at the end
-of the command line, where :option:`-n` takes an argument of any type).  Also,
+some user errors, such as bad option arguments (passing ``-n 4x`` where
+``-n`` takes an integer argument), missing arguments (``-n`` at the end
+of the command line, where ``-n`` takes an argument of any type).  Also,
 you can call :func:`OptionParser.error` to signal an application-defined error
 condition::
 
@@ -652,7 +652,7 @@
 program's usage message and an error message to standard error and exits with
 error status 2.
 
-Consider the first example above, where the user passes ``"4x"`` to an option
+Consider the first example above, where the user passes ``4x`` to an option
 that takes an integer::
 
    $ /usr/bin/foo -n 4x
@@ -745,8 +745,8 @@
    ``version`` (default: ``None``)
       A version string to print when the user supplies a version option. If you
       supply a true value for ``version``, :mod:`optparse` automatically adds a
-      version option with the single option string ``"--version"``.  The
-      substring ``"%prog"`` is expanded the same as for ``usage``.
+      version option with the single option string ``--version``.  The
+      substring ``%prog`` is expanded the same as for ``usage``.
 
    ``conflict_handler`` (default: ``"error"``)
       Specifies what to do when options with conflicting option strings are
@@ -765,11 +765,11 @@
       IndentedHelpFormatter and TitledHelpFormatter.
 
    ``add_help_option`` (default: ``True``)
-      If true, :mod:`optparse` will add a help option (with option strings ``"-h"``
-      and ``"--help"``) to the parser.
+      If true, :mod:`optparse` will add a help option (with option strings ``-h``
+      and ``--help``) to the parser.
 
    ``prog``
-      The string to use when expanding ``"%prog"`` in ``usage`` and ``version``
+      The string to use when expanding ``%prog`` in ``usage`` and ``version``
       instead of ``os.path.basename(sys.argv[0])``.
 
    ``epilog`` (default: ``None``)
@@ -813,7 +813,7 @@
 ^^^^^^^^^^^^^^^^
 
 Each Option instance represents a set of synonymous command-line option strings,
-e.g. :option:`-f` and :option:`--file`.  You can specify any number of short or
+e.g. ``-f`` and ``--file``.  You can specify any number of short or
 long option strings, but you must specify at least one overall option string.
 
 The canonical way to create an :class:`Option` instance is with the
@@ -976,7 +976,7 @@
 .. attribute:: Option.help
 
    Help text to print for this option when listing all available options after
-   the user supplies a :attr:`~Option.help` option (such as ``"--help"``).  If
+   the user supplies a :attr:`~Option.help` option (such as ``--help``).  If
    no help text is supplied, the option will be listed without help text.  To
    hide this option, use the special value :data:`optparse.SUPPRESS_HELP`.
 
@@ -1014,9 +1014,9 @@
   If :attr:`~Option.type` is not supplied, it defaults to ``"string"``.
 
   If :attr:`~Option.dest` is not supplied, :mod:`optparse` derives a destination
-  from the first long option string (e.g., ``"--foo-bar"`` implies
+  from the first long option string (e.g., ``--foo-bar`` implies
   ``foo_bar``). If there are no long option strings, :mod:`optparse` derives a
-  destination from the first short option string (e.g., ``"-f"`` implies ``f``).
+  destination from the first short option string (e.g., ``-f`` implies ``f``).
 
   Example::
 
@@ -1047,7 +1047,7 @@
      parser.add_option("--noisy",
                        action="store_const", const=2, dest="verbose")
 
-  If ``"--noisy"`` is seen, :mod:`optparse` will set  ::
+  If ``--noisy`` is seen, :mod:`optparse` will set  ::
 
      options.verbose = 2
 
@@ -1082,13 +1082,13 @@
 
      parser.add_option("-t", "--tracks", action="append", type="int")
 
-  If ``"-t3"`` is seen on the command-line, :mod:`optparse` does the equivalent
+  If ``-t3`` is seen on the command-line, :mod:`optparse` does the equivalent
   of::
 
      options.tracks = []
      options.tracks.append(int("3"))
 
-  If, a little later on, ``"--tracks=4"`` is seen, it does::
+  If, a little later on, ``--tracks=4`` is seen, it does::
 
      options.tracks.append(int("4"))
 
@@ -1110,13 +1110,13 @@
 
      parser.add_option("-v", action="count", dest="verbosity")
 
-  The first time ``"-v"`` is seen on the command line, :mod:`optparse` does the
+  The first time ``-v`` is seen on the command line, :mod:`optparse` does the
   equivalent of::
 
      options.verbosity = 0
      options.verbosity += 1
 
-  Every subsequent occurrence of ``"-v"`` results in  ::
+  Every subsequent occurrence of ``-v`` results in  ::
 
      options.verbosity += 1
 
@@ -1159,7 +1159,7 @@
                        help="Input file to read data from")
      parser.add_option("--secret", help=SUPPRESS_HELP)
 
-  If :mod:`optparse` sees either ``"-h"`` or ``"--help"`` on the command line,
+  If :mod:`optparse` sees either ``-h`` or ``--help`` on the command line,
   it will print something like the following help message to stdout (assuming
   ``sys.argv[0]`` is ``"foo.py"``):
 
@@ -1273,8 +1273,8 @@
 
 .. method:: OptionParser.disable_interspersed_args()
 
-   Set parsing to stop on the first non-option.  For example, if ``"-a"`` and
-   ``"-b"`` are both simple options that take no arguments, :mod:`optparse`
+   Set parsing to stop on the first non-option.  For example, if ``-a`` and
+   ``-b`` are both simple options that take no arguments, :mod:`optparse`
    normally accepts this syntax::
 
       prog -a arg1 -b arg2
@@ -1304,7 +1304,7 @@
 .. method:: OptionParser.has_option(opt_str)
 
    Return true if the OptionParser has an option with option string *opt_str*
-   (e.g., ``"-q"`` or ``"--verbose"``).
+   (e.g., ``-q`` or ``--verbose``).
 
 .. method:: OptionParser.remove_option(opt_str)
 
@@ -1357,9 +1357,9 @@
    parser.add_option("-n", "--noisy", ..., help="be noisy")
 
 At this point, :mod:`optparse` detects that a previously-added option is already
-using the ``"-n"`` option string.  Since ``conflict_handler`` is ``"resolve"``,
-it resolves the situation by removing ``"-n"`` from the earlier option's list of
-option strings.  Now ``"--dry-run"`` is the only way for the user to activate
+using the ``-n`` option string.  Since ``conflict_handler`` is ``"resolve"``,
+it resolves the situation by removing ``-n`` from the earlier option's list of
+option strings.  Now ``--dry-run`` is the only way for the user to activate
 that option.  If the user asks for help, the help message will reflect that::
 
    options:
@@ -1375,7 +1375,7 @@
 
    parser.add_option("--dry-run", ..., help="new dry-run option")
 
-At this point, the original :option:`-n/--dry-run` option is no longer
+At this point, the original ``-n``/``--dry-run`` option is no longer
 accessible, so :mod:`optparse` removes it, leaving this help text::
 
    options:
@@ -1413,7 +1413,7 @@
 .. method:: OptionParser.print_usage(file=None)
 
    Print the usage message for the current program (``self.usage``) to *file*
-   (default stdout).  Any occurrence of the string ``"%prog"`` in ``self.usage``
+   (default stdout).  Any occurrence of the string ``%prog`` in ``self.usage``
    is replaced with the name of the current program.  Does nothing if
    ``self.usage`` is empty or not defined.
 
@@ -1477,9 +1477,9 @@
 
 ``callback`` is a function (or other callable object), so you must have already
 defined ``my_callback()`` when you create this callback option. In this simple
-case, :mod:`optparse` doesn't even know if :option:`-c` takes any arguments,
+case, :mod:`optparse` doesn't even know if ``-c`` takes any arguments,
 which usually means that the option takes no arguments---the mere presence of
-:option:`-c` on the command-line is all it needs to know.  In some
+``-c`` on the command-line is all it needs to know.  In some
 circumstances, though, you might want your callback to consume an arbitrary
 number of command-line arguments.  This is where writing callbacks gets tricky;
 it's covered later in this section.
@@ -1532,8 +1532,8 @@
 ``opt_str``
    is the option string seen on the command-line that's triggering the callback.
    (If an abbreviated long option was used, ``opt_str`` will be the full,
-   canonical option string---e.g. if the user puts ``"--foo"`` on the
-   command-line as an abbreviation for ``"--foobar"``, then ``opt_str`` will be
+   canonical option string---e.g. if the user puts ``--foo`` on the
+   command-line as an abbreviation for ``--foobar``, then ``opt_str`` will be
    ``"--foobar"``.)
 
 ``value``
@@ -1608,8 +1608,8 @@
 Callback example 2: check option order
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-Here's a slightly more interesting example: record the fact that ``"-a"`` is
-seen, but blow up if it comes after ``"-b"`` in the command-line.  ::
+Here's a slightly more interesting example: record the fact that ``-a`` is
+seen, but blow up if it comes after ``-b`` in the command-line.  ::
 
    def check_order(option, opt_str, value, parser):
        if parser.values.b:
@@ -1626,7 +1626,7 @@
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 If you want to re-use this callback for several similar options (set a flag, but
-blow up if ``"-b"`` has already been seen), it needs a bit of work: the error
+blow up if ``-b`` has already been seen), it needs a bit of work: the error
 message and the flag that it sets must be generalized.  ::
 
    def check_order(option, opt_str, value, parser):
@@ -1696,15 +1696,15 @@
 built-in capabilities for it.  And you have to deal with certain intricacies of
 conventional Unix command-line parsing that :mod:`optparse` normally handles for
 you.  In particular, callbacks should implement the conventional rules for bare
-``"--"`` and ``"-"`` arguments:
+``--`` and ``-`` arguments:
 
-* either ``"--"`` or ``"-"`` can be option arguments
+* either ``--`` or ``-`` can be option arguments
 
-* bare ``"--"`` (if not the argument to some option): halt command-line
-  processing and discard the ``"--"``
+* bare ``--`` (if not the argument to some option): halt command-line
+  processing and discard the ``--``
 
-* bare ``"-"`` (if not the argument to some option): halt command-line
-  processing but keep the ``"-"`` (append it to ``parser.largs``)
+* bare ``-`` (if not the argument to some option): halt command-line
+  processing but keep the ``-`` (append it to ``parser.largs``)
 
 If you want an option that takes a variable number of arguments, there are
 several subtle, tricky issues to worry about.  The exact implementation you
@@ -1775,7 +1775,7 @@
       def check_mytype(option, opt, value)
 
    where ``option`` is an :class:`Option` instance, ``opt`` is an option string
-   (e.g., ``"-f"``), and ``value`` is the string from the command line that must
+   (e.g., ``-f``), and ``value`` is the string from the command line that must
    be checked and converted to your desired type.  ``check_mytype()`` should
    return an object of the hypothetical type ``mytype``.  The value returned by
    a type-checking function will wind up in the OptionValues instance returned
@@ -1887,7 +1887,7 @@
 ``"append"`` action, but instead of taking a single value from the command-line
 and appending it to an existing list, ``"extend"`` will take multiple values in
 a single comma-delimited string, and extend an existing list with them.  That
-is, if ``"--names"`` is an ``"extend"`` option of type ``"string"``, the command
+is, if ``--names`` is an ``"extend"`` option of type ``"string"``, the command
 line ::
 
    --names=foo,bar --names blah --names ding,dong
diff --git a/Doc/library/pydoc.rst b/Doc/library/pydoc.rst
index 3784515..e5f8fe2 100644
--- a/Doc/library/pydoc.rst
+++ b/Doc/library/pydoc.rst
@@ -43,25 +43,25 @@
    executed on that occasion.  Use an ``if __name__ == '__main__':`` guard to
    only execute code when a file is invoked as a script and not just imported.
 
-Specifying a :option:`-w` flag before the argument will cause HTML documentation
+Specifying a ``-w`` flag before the argument will cause HTML documentation
 to be written out to a file in the current directory, instead of displaying text
 on the console.
 
-Specifying a :option:`-k` flag before the argument will search the synopsis
+Specifying a ``-k`` flag before the argument will search the synopsis
 lines of all available modules for the keyword given as the argument, again in a
 manner similar to the Unix :program:`man` command.  The synopsis line of a
 module is the first line of its documentation string.
 
 You can also use :program:`pydoc` to start an HTTP server on the local machine
-that will serve documentation to visiting Web browsers. :program:`pydoc`
-:option:`-p 1234` will start a HTTP server on port 1234, allowing you to browse
+that will serve documentation to visiting Web browsers. :program:`pydoc -p 1234`
+will start a HTTP server on port 1234, allowing you to browse
 the documentation at ``http://localhost:1234/`` in your preferred Web browser.
-:program:`pydoc` :option:`-g` will start the server and additionally bring up a
+:program:`pydoc -g` will start the server and additionally bring up a
 small :mod:`Tkinter`\ -based graphical interface to help you search for
 documentation pages.
 
 When :program:`pydoc` generates documentation, it uses the current environment
-and path to locate modules.  Thus, invoking :program:`pydoc` :option:`spam`
+and path to locate modules.  Thus, invoking :program:`pydoc spam`
 documents precisely the version of the module you would get if you started the
 Python interpreter and typed ``import spam``.
 
diff --git a/Doc/library/sys.rst b/Doc/library/sys.rst
index e812b85..ba2ae5c 100644
--- a/Doc/library/sys.rst
+++ b/Doc/library/sys.rst
@@ -208,7 +208,7 @@
 
    A string giving the site-specific directory prefix where the platform-dependent
    Python files are installed; by default, this is also ``'/usr/local'``.  This can
-   be set at build time with the :option:`--exec-prefix` argument to the
+   be set at build time with the ``--exec-prefix`` argument to the
    :program:`configure` script.  Specifically, all configuration files (e.g. the
    :file:`pyconfig.h` header file) are installed in the directory ``exec_prefix +
    '/lib/pythonversion/config'``, and shared library modules are installed in
@@ -735,7 +735,7 @@
 
    A string giving the site-specific directory prefix where the platform
    independent Python files are installed; by default, this is the string
-   ``'/usr/local'``.  This can be set at build time with the :option:`--prefix`
+   ``'/usr/local'``.  This can be set at build time with the ``--prefix``
    argument to the :program:`configure` script.  The main collection of Python
    library modules is installed in the directory ``prefix + '/lib/pythonversion'``
    while the platform independent header files (all except :file:`pyconfig.h`) are
@@ -923,7 +923,7 @@
 
    Activate dumping of VM measurements using the Pentium timestamp counter, if
    *on_flag* is true. Deactivate these dumps if *on_flag* is off. The function is
-   available only if Python was compiled with :option:`--with-tsc`. To understand
+   available only if Python was compiled with ``--with-tsc``. To understand
    the output of this dump, read :file:`Python/ceval.c` in the Python sources.
 
    .. versionadded:: 2.4
diff --git a/Doc/library/test.rst b/Doc/library/test.rst
index 88f0397..3a0b5cb 100644
--- a/Doc/library/test.rst
+++ b/Doc/library/test.rst
@@ -155,35 +155,35 @@
 
 .. _regrtest:
 
-Running tests using :mod:`test.regrtest`
-----------------------------------------
+Running tests using the command-line interface
+----------------------------------------------
 
-:mod:`test.regrtest` can be used as a script to drive Python's regression test
-suite. Running the script by itself automatically starts running all regression
+The :mod:`test.regrtest` module can be run as a script to drive Python's regression
+test suite, thanks to the :option:`-m` option: :program:`python -m test.regrtest`.
+Running the script by itself automatically starts running all regression
 tests in the :mod:`test` package. It does this by finding all modules in the
 package whose name starts with ``test_``, importing them, and executing the
 function :func:`test_main` if present. The names of tests to execute may also
 be passed to the script. Specifying a single regression test (:program:`python
-regrtest.py` :option:`test_spam.py`) will minimize output and only print
-whether the test passed or failed and thus minimize output.
+-m test.regrtest test_spam`) will minimize output and only print whether
+the test passed or failed and thus minimize output.
 
 Running :mod:`test.regrtest` directly allows what resources are available for
 tests to use to be set. You do this by using the :option:`-u` command-line
-option. Run :program:`python regrtest.py` :option:`-uall` to turn on all
-resources; specifying :option:`all` as an option for :option:`-u` enables all
+option. Run :program:`python -m test.regrtest -uall` to turn on all
+resources; specifying ``all`` as an option for ``-u`` enables all
 possible resources. If all but one resource is desired (a more common case), a
 comma-separated list of resources that are not desired may be listed after
-:option:`all`. The command :program:`python regrtest.py`
-:option:`-uall,-audio,-largefile` will run :mod:`test.regrtest` with all
-resources except the :option:`audio` and :option:`largefile` resources. For a
-list of all resources and more command-line options, run :program:`python
-regrtest.py` :option:`-h`.
+``all``. The command :program:`python -m test.regrtest -uall,-audio,-largefile`
+will run :mod:`test.regrtest` with all resources except the ``audio`` and
+``largefile`` resources. For a list of all resources and more command-line
+options, run :program:`python -m test.regrtest -h`.
 
 Some other ways to execute the regression tests depend on what platform the
-tests are being executed on. On Unix, you can run :program:`make`
-:option:`test` at the top-level directory where Python was built. On Windows,
-executing :program:`rt.bat` from your :file:`PCBuild` directory will run all
-regression tests.
+tests are being executed on. On Unix, you can run :program:`make test` at the
+top-level directory where Python was built. On Windows, executing
+:program:`rt.bat` from your :file:`PCBuild` directory will run all regression
+tests.
 
 
 :mod:`test.test_support` --- Utility functions for tests
diff --git a/Doc/library/timeit.rst b/Doc/library/timeit.rst
index 4f930b3..29a941c 100644
--- a/Doc/library/timeit.rst
+++ b/Doc/library/timeit.rst
@@ -125,27 +125,36 @@
 
    python -m timeit [-n N] [-r N] [-s S] [-t] [-c] [-h] [statement ...]
 
-where the following options are understood:
+Where the following options are understood:
 
--n N/:option:`--number=N`
+.. program:: timeit
+
+.. cmdoption:: -n N, --number=N
+
    how many times to execute 'statement'
 
--r N/:option:`--repeat=N`
+.. cmdoption:: -r N, --repeat=N
+
    how many times to repeat the timer (default 3)
 
--s S/:option:`--setup=S`
-   statement to be executed once initially (default ``'pass'``)
+.. cmdoption:: -s S, --setup=S
 
--t/:option:`--time`
+   statement to be executed once initially (default ``pass``)
+
+.. cmdoption:: -t, --time
+
    use :func:`time.time` (default on all platforms but Windows)
 
--c/:option:`--clock`
+.. cmdoption:: -c, --clock
+
    use :func:`time.clock` (default on Windows)
 
--v/:option:`--verbose`
+.. cmdoption:: -v, --verbose
+
    print raw timing results; repeat for more digits precision
 
--h/:option:`--help`
+.. cmdoption:: -h, --help
+
    print a short usage message and exit
 
 A multi-line statement may be given by specifying each line as a separate
diff --git a/Doc/library/unittest.rst b/Doc/library/unittest.rst
index 6fc49eb..657cab2 100644
--- a/Doc/library/unittest.rst
+++ b/Doc/library/unittest.rst
@@ -157,7 +157,7 @@
 test.
 
 The final block shows a simple way to run the tests. :func:`unittest.main`
-provides a command line interface to the test script.  When run from the command
+provides a command-line interface to the test script.  When run from the command
 line, the above script produces an output that looks like this::
 
    ...
@@ -192,7 +192,7 @@
 
 .. _unittest-command-line-interface:
 
-Command Line Interface
+Command-Line Interface
 ----------------------
 
 The unittest module can be used from the command line to run tests from
@@ -209,7 +209,7 @@
 
    python -m unittest -v test_module
 
-For a list of all the command line options::
+For a list of all the command-line options::
 
    python -m unittest -h
 
@@ -218,31 +218,33 @@
    not modules or classes.
 
 
-failfast, catch and buffer command line options
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Command-line options
+~~~~~~~~~~~~~~~~~~~~
 
-unittest supports three command options.
+:program:`unittest` supports these command-line options:
 
-* :option:`-b` / :option:`--buffer`
+.. program:: unittest
 
-  The standard output and standard error streams are buffered during the test
-  run. Output during a passing test is discarded. Output is echoed normally
-  on test fail or error and is added to the failure messages.
+.. cmdoption:: -b, --buffer
 
-* :option:`-c` / :option:`--catch`
+   The standard output and standard error streams are buffered during the test
+   run. Output during a passing test is discarded. Output is echoed normally
+   on test fail or error and is added to the failure messages.
 
-  Control-C during the test run waits for the current test to end and then
-  reports all the results so far. A second control-C raises the normal
-  :exc:`KeyboardInterrupt` exception.
+.. cmdoption:: -c, --catch
 
-  See `Signal Handling`_ for the functions that provide this functionality.
+   Control-C during the test run waits for the current test to end and then
+   reports all the results so far. A second control-C raises the normal
+   :exc:`KeyboardInterrupt` exception.
 
-* :option:`-f` / :option:`--failfast`
+   See `Signal Handling`_ for the functions that provide this functionality.
 
-  Stop the test run on the first error or failure.
+.. cmdoption:: -f, --failfast
 
-..  versionadded:: 2.7
-   The command line options ``-c``, ``-b`` and ``-f`` were added.
+   Stop the test run on the first error or failure.
+
+.. versionadded:: 2.7
+   The command-line options ``-b``, ``-c`` and ``-f`` were added.
 
 The command line can also be used for test discovery, for running all of the
 tests in a project or just a subset.
@@ -260,18 +262,30 @@
 directory of the project (in other words, they must all be in Python packages).
 
 Test discovery is implemented in :meth:`TestLoader.discover`, but can also be
-used from the command line. The basic command line usage is::
+used from the command line. The basic command-line usage is::
 
    cd project_directory
    python -m unittest discover
 
 The ``discover`` sub-command has the following options:
 
-   -v, --verbose    Verbose output
-   -s directory     Directory to start discovery ('.' default)
-   -p pattern       Pattern to match test files ('test*.py' default)
-   -t directory     Top level directory of project (default to
-                    start directory)
+.. program:: unittest discover
+
+.. cmdoption:: -v, --verbose
+
+   Verbose output
+
+.. cmdoption:: -s directory
+
+   Directory to start discovery ('.' default)
+
+.. cmdoption:: -p pattern
+
+   Pattern to match test files ('test*.py' default)
+
+.. cmdoption:: -t directory
+
+   Top level directory of project (defaults to start directory)
 
 The :option:`-s`, :option:`-p`, and :option:`-t` options can be passed in
 as positional arguments in that order. The following two command lines
@@ -1725,7 +1739,7 @@
       >>> main(module='test_module', exit=False)
 
    The ``failfast``, ``catchbreak`` and ``buffer`` parameters have the same
-   effect as the `failfast, catch and buffer command line options`_.
+   effect as the same-name `command-line options`_.
 
    Calling ``main`` actually returns an instance of the ``TestProgram`` class.
    This stores the result of the tests run as the ``result`` attribute.
@@ -1888,12 +1902,12 @@
 Signal Handling
 ---------------
 
-The :option:`-c`/:option:`--catch` command line option to unittest, along with the ``catchbreak``
-parameter to :func:`unittest.main()`, provide more friendly handling of
-control-C during a test run. With catch break behavior enabled control-C will
-allow the currently running test to complete, and the test run will then end
-and report all the results so far. A second control-c will raise a
-:exc:`KeyboardInterrupt` in the usual way.
+The :option:`-c/--catch <unittest -c>` command-line option to unittest,
+along with the ``catchbreak`` parameter to :func:`unittest.main()`, provide
+more friendly handling of control-C during a test run. With catch break
+behavior enabled control-C will allow the currently running test to complete,
+and the test run will then end and report all the results so far. A second
+control-c will raise a :exc:`KeyboardInterrupt` in the usual way.
 
 The control-c handling signal handler attempts to remain compatible with code or
 tests that install their own :const:`signal.SIGINT` handler. If the ``unittest``
diff --git a/Doc/library/webbrowser.rst b/Doc/library/webbrowser.rst
index 20f6231..74e12a2 100644
--- a/Doc/library/webbrowser.rst
+++ b/Doc/library/webbrowser.rst
@@ -32,8 +32,8 @@
 
 The script :program:`webbrowser` can be used as a command-line interface for the
 module. It accepts an URL as the argument. It accepts the following optional
-parameters: :option:`-n` opens the URL in a new browser window, if possible;
-:option:`-t` opens the URL in a new browser page ("tab"). The options are,
+parameters: ``-n`` opens the URL in a new browser window, if possible;
+``-t`` opens the URL in a new browser page ("tab"). The options are,
 naturally, mutually exclusive.
 
 The following exception is defined:
@@ -68,7 +68,6 @@
    Open *url* in a new window of the default browser, if possible, otherwise, open
    *url* in the only browser window.
 
-
 .. function:: open_new_tab(url)
 
    Open *url* in a new page ("tab") of the default browser, if possible, otherwise