Eric the half-a-wit, driven to berserk rage after repeatedly doing
builds during which he forgot to uncomment crucial library lines in
Setup, walks into Guido's East End nightclub with a tactical nuclear
weapon on his shoulder. Said nuclear weapon is promptly deployed
exactly where it will do the most good, right in the middle of
configure.in.
With this patch, the set of libraries autoconfigured in is extended to
include ndbm, gdbm, and crypt. This essentially eliminates any need to
tweak Setup for a normal Linux build.
"'E was a fair man. Cruel, but fair."
diff --git a/configure b/configure
index 605fa93..7e3d353 100755
--- a/configure
+++ b/configure
@@ -1,6 +1,6 @@
#! /bin/sh
-# From configure.in Revision: 1.188
+# From configure.in Revision: 1.189
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13
@@ -3160,10 +3160,14 @@
fi
-# This is used to generate Setup.config
+#
+# These are used to generate Setup.config. They autoconfigure several
+# features that are otherwise severe pains in the butt.
+#
+# ncurses
echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
-echo "configure:3167: checking for initscr in -lncurses" >&5
+echo "configure:3171: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -3171,7 +3175,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lncurses -ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3175 "configure"
+#line 3179 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -3182,7 +3186,7 @@
initscr()
; return 0; }
EOF
-if { (eval echo configure:3186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -3203,11 +3207,10 @@
USE_NCURSES_MODULE="#"
fi
-
-# This is used to generate Setup.config
+# GNU readline
echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
-echo "configure:3211: checking for readline in -lreadline" >&5
+echo "configure:3214: checking for readline in -lreadline" >&5
ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -3215,7 +3218,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lreadline -ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3219 "configure"
+#line 3222 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -3226,7 +3229,7 @@
readline()
; return 0; }
EOF
-if { (eval echo configure:3230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -3247,13 +3250,151 @@
USE_READLINE_MODULE="#"
fi
+# gdbm(3)
+
+
+echo $ac_n "checking for gdbm_open in -lgdbm""... $ac_c" 1>&6
+echo "configure:3258: checking for gdbm_open in -lgdbm" >&5
+ac_lib_var=`echo gdbm'_'gdbm_open | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lgdbm $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3266 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gdbm_open();
+
+int main() {
+gdbm_open()
+; return 0; }
+EOF
+if { (eval echo configure:3277: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ USE_GDBM_MODULE=""
+ HAVE_LIBGDBM=-lgdbm
+else
+ echo "$ac_t""no" 1>&6
+USE_GDBM_MODULE="#"
+ HAVE_LIBGDBM=""
+fi
+
+# ndbm(3)
+
+
+echo $ac_n "checking for ndbm_open in -lndbm""... $ac_c" 1>&6
+echo "configure:3304: checking for ndbm_open in -lndbm" >&5
+ac_lib_var=`echo ndbm'_'ndbm_open | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lndbm $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3312 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char ndbm_open();
+
+int main() {
+ndbm_open()
+; return 0; }
+EOF
+if { (eval echo configure:3323: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ USE_NDBM_MODULE=""
+ HAVE_LIBNDBM=-lndbm
+else
+ echo "$ac_t""no" 1>&6
+USE_NDBM_MODULE="#"
+ HAVE_LIBNDBM=""
+fi
+
+# crypt(3)
+
+
+echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
+echo "configure:3350: checking for crypt in -lcrypt" >&5
+ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lcrypt $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3358 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char crypt();
+
+int main() {
+crypt()
+; return 0; }
+EOF
+if { (eval echo configure:3369: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ USE_CRYPT_MODULE=""
+ HAVE_LIBCRYPT=-lcrypt
+else
+ echo "$ac_t""no" 1>&6
+USE_CRYPT_MODULE="#"
+ HAVE_LIBCRYPT=""
+fi
+
# This is used to generate Setup.config
USE_THREAD_MODULE=""
echo $ac_n "checking for --with-dec-threads""... $ac_c" 1>&6
-echo "configure:3257: checking for --with-dec-threads" >&5
+echo "configure:3398: checking for --with-dec-threads" >&5
# Check whether --with-dec-threads or --without-dec-threads was given.
if test "${with_dec_threads+set}" = set; then
@@ -3270,7 +3411,7 @@
echo $ac_n "checking for --with-threads""... $ac_c" 1>&6
-echo "configure:3274: checking for --with-threads" >&5
+echo "configure:3415: checking for --with-threads" >&5
# Check whether --with-threads or --without-threads was given.
if test "${with_threads+set}" = set; then
withval="$with_threads"
@@ -3308,17 +3449,17 @@
ac_safe=`echo "mach/cthreads.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for mach/cthreads.h""... $ac_c" 1>&6
-echo "configure:3312: checking for mach/cthreads.h" >&5
+echo "configure:3453: checking for mach/cthreads.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3317 "configure"
+#line 3458 "configure"
#include "confdefs.h"
#include <mach/cthreads.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3322: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3463: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -3347,7 +3488,7 @@
echo "$ac_t""no" 1>&6
echo $ac_n "checking for --with-pth""... $ac_c" 1>&6
-echo "configure:3351: checking for --with-pth" >&5
+echo "configure:3492: checking for --with-pth" >&5
# Check whether --with-pth or --without-pth was given.
if test "${with_pth+set}" = set; then
withval="$with_pth"
@@ -3367,7 +3508,7 @@
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:3371: checking for pthread_create in -lpthread" >&5
+echo "configure:3512: checking for pthread_create in -lpthread" >&5
ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -3375,7 +3516,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3379 "configure"
+#line 3520 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -3386,7 +3527,7 @@
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3531: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -3415,12 +3556,12 @@
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_detach""... $ac_c" 1>&6
-echo "configure:3419: checking for pthread_detach" >&5
+echo "configure:3560: checking for pthread_detach" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_detach'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3424 "configure"
+#line 3565 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_detach(); below. */
@@ -3443,7 +3584,7 @@
; return 0; }
EOF
-if { (eval echo configure:3447: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3588: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_pthread_detach=yes"
else
@@ -3474,17 +3615,17 @@
ac_safe=`echo "kernel/OS.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for kernel/OS.h""... $ac_c" 1>&6
-echo "configure:3478: checking for kernel/OS.h" >&5
+echo "configure:3619: checking for kernel/OS.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3483 "configure"
+#line 3624 "configure"
#include "confdefs.h"
#include <kernel/OS.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3488: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3629: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -3513,7 +3654,7 @@
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6
-echo "configure:3517: checking for pthread_create in -lpthreads" >&5
+echo "configure:3658: checking for pthread_create in -lpthreads" >&5
ac_lib_var=`echo pthreads'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -3521,7 +3662,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lpthreads $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3525 "configure"
+#line 3666 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -3532,7 +3673,7 @@
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3536: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3677: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -3561,7 +3702,7 @@
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:3565: checking for pthread_create in -lc_r" >&5
+echo "configure:3706: checking for pthread_create in -lc_r" >&5
ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -3569,7 +3710,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lc_r $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3573 "configure"
+#line 3714 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -3580,7 +3721,7 @@
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3725: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -3609,7 +3750,7 @@
echo "$ac_t""no" 1>&6
echo $ac_n "checking for __d6_pthread_create in -lthread""... $ac_c" 1>&6
-echo "configure:3613: checking for __d6_pthread_create in -lthread" >&5
+echo "configure:3754: checking for __d6_pthread_create in -lthread" >&5
ac_lib_var=`echo thread'_'__d6_pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -3617,7 +3758,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3621 "configure"
+#line 3762 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -3628,7 +3769,7 @@
__d6_pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -3657,7 +3798,7 @@
echo "$ac_t""no" 1>&6
echo $ac_n "checking for __pthread_create_system in -lpthread""... $ac_c" 1>&6
-echo "configure:3661: checking for __pthread_create_system in -lpthread" >&5
+echo "configure:3802: checking for __pthread_create_system in -lpthread" >&5
ac_lib_var=`echo pthread'_'__pthread_create_system | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -3665,7 +3806,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3669 "configure"
+#line 3810 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -3676,7 +3817,7 @@
__pthread_create_system()
; return 0; }
EOF
-if { (eval echo configure:3680: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3821: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -3705,7 +3846,7 @@
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lcma""... $ac_c" 1>&6
-echo "configure:3709: checking for pthread_create in -lcma" >&5
+echo "configure:3850: checking for pthread_create in -lcma" >&5
ac_lib_var=`echo cma'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -3713,7 +3854,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lcma $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3717 "configure"
+#line 3858 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -3724,7 +3865,7 @@
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3728: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3869: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -3776,7 +3917,7 @@
echo $ac_n "checking for usconfig in -lmpc""... $ac_c" 1>&6
-echo "configure:3780: checking for usconfig in -lmpc" >&5
+echo "configure:3921: checking for usconfig in -lmpc" >&5
ac_lib_var=`echo mpc'_'usconfig | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -3784,7 +3925,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lmpc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3788 "configure"
+#line 3929 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -3795,7 +3936,7 @@
usconfig()
; return 0; }
EOF
-if { (eval echo configure:3799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3940: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -3822,7 +3963,7 @@
fi
echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6
-echo "configure:3826: checking for thr_create in -lthread" >&5
+echo "configure:3967: checking for thr_create in -lthread" >&5
ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -3830,7 +3971,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3834 "configure"
+#line 3975 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -3841,7 +3982,7 @@
thr_create()
; return 0; }
EOF
-if { (eval echo configure:3845: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -3882,7 +4023,7 @@
USE_GC_MODULE=""
echo $ac_n "checking for --with-cycle-gc""... $ac_c" 1>&6
-echo "configure:3886: checking for --with-cycle-gc" >&5
+echo "configure:4027: checking for --with-cycle-gc" >&5
# Check whether --with-cycle-gc or --without-cycle-gc was given.
if test "${with_cycle_gc+set}" = set; then
withval="$with_cycle_gc"
@@ -3908,7 +4049,7 @@
USE_DBM_MODULE=""
echo $ac_n "checking for --with-dbm""... $ac_c" 1>&6
-echo "configure:3912: checking for --with-dbm" >&5
+echo "configure:4053: checking for --with-dbm" >&5
# Check whether --with-dbm or --without-dbm was given.
if test "${with_dbm+set}" = set; then
withval="$with_dbm"
@@ -3926,7 +4067,7 @@
# make sure user knows why dbm support wasn't enabled even though
# s/he requested it
if test "$with_dbm" = "yes"
- then echo $ac_n "(requested by no ndbm.h was found) $ac_c"
+ then echo $ac_n "(requested but no ndbm.h was found) $ac_c"
fi
with_dbm="no"
fi
@@ -3947,12 +4088,12 @@
# check for libndbm
echo $ac_n "checking for dbmopen""... $ac_c" 1>&6
-echo "configure:3951: checking for dbmopen" >&5
+echo "configure:4092: checking for dbmopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dbmopen'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3956 "configure"
+#line 4097 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbmopen(); below. */
@@ -3975,7 +4116,7 @@
; return 0; }
EOF
-if { (eval echo configure:3979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_dbmopen=yes"
else
@@ -4002,7 +4143,7 @@
USE_BSDDB_MODULE=""
echo $ac_n "checking for --with-libdb""... $ac_c" 1>&6
-echo "configure:4006: checking for --with-libdb" >&5
+echo "configure:4147: checking for --with-libdb" >&5
# Check whether --with-libdb or --without-libdb was given.
if test "${with_libdb+set}" = set; then
withval="$with_libdb"
@@ -4045,12 +4186,12 @@
# Instead, we just trust it is in libdb; linking will fail if it
# is not.
echo $ac_n "checking for dbopen""... $ac_c" 1>&6
-echo "configure:4049: checking for dbopen" >&5
+echo "configure:4190: checking for dbopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dbopen'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4054 "configure"
+#line 4195 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbopen(); below. */
@@ -4073,7 +4214,7 @@
; return 0; }
EOF
-if { (eval echo configure:4077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_dbopen=yes"
else
@@ -4097,7 +4238,7 @@
# Check for --with-wctype-functions
echo $ac_n "checking for --with-wctype-functions""... $ac_c" 1>&6
-echo "configure:4101: checking for --with-wctype-functions" >&5
+echo "configure:4242: checking for --with-wctype-functions" >&5
# Check whether --with-wctype-functions or --without-wctype-functions was given.
if test "${with_wctype_functions+set}" = set; then
withval="$with_wctype_functions"
@@ -4119,7 +4260,7 @@
DLINCLDIR=/
echo $ac_n "checking for --with-sgi-dl""... $ac_c" 1>&6
-echo "configure:4123: checking for --with-sgi-dl" >&5
+echo "configure:4264: checking for --with-sgi-dl" >&5
# Check whether --with-sgi-dl or --without-sgi-dl was given.
if test "${with_sgi_dl+set}" = set; then
withval="$with_sgi_dl"
@@ -4143,7 +4284,7 @@
echo $ac_n "checking for --with-dl-dld""... $ac_c" 1>&6
-echo "configure:4147: checking for --with-dl-dld" >&5
+echo "configure:4288: checking for --with-dl-dld" >&5
# Check whether --with-dl-dld or --without-dl-dld was given.
if test "${with_dl_dld+set}" = set; then
withval="$with_dl_dld"
@@ -4172,12 +4313,12 @@
for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4176: checking for $ac_func" >&5
+echo "configure:4317: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4181 "configure"
+#line 4322 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4200,7 +4341,7 @@
; return 0; }
EOF
-if { (eval echo configure:4204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4229,7 +4370,7 @@
# loading of modules.
echo $ac_n "checking DYNLOADFILE""... $ac_c" 1>&6
-echo "configure:4233: checking DYNLOADFILE" >&5
+echo "configure:4374: checking DYNLOADFILE" >&5
if test -z "$DYNLOADFILE"
then
case $ac_sys_system/$ac_sys_release in
@@ -4270,12 +4411,12 @@
truncate uname waitpid _getpty
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4274: checking for $ac_func" >&5
+echo "configure:4415: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4279 "configure"
+#line 4420 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4298,7 +4439,7 @@
; return 0; }
EOF
-if { (eval echo configure:4302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4443: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4328,12 +4469,12 @@
for ac_func in openpty
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4332: checking for $ac_func" >&5
+echo "configure:4473: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4337 "configure"
+#line 4478 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4356,7 +4497,7 @@
; return 0; }
EOF
-if { (eval echo configure:4360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4378,7 +4519,7 @@
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for openpty in -lutil""... $ac_c" 1>&6
-echo "configure:4382: checking for openpty in -lutil" >&5
+echo "configure:4523: checking for openpty in -lutil" >&5
ac_lib_var=`echo util'_'openpty | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -4386,7 +4527,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4390 "configure"
+#line 4531 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -4397,7 +4538,7 @@
openpty()
; return 0; }
EOF
-if { (eval echo configure:4401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4542: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -4426,12 +4567,12 @@
for ac_func in forkpty
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4430: checking for $ac_func" >&5
+echo "configure:4571: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4435 "configure"
+#line 4576 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4454,7 +4595,7 @@
; return 0; }
EOF
-if { (eval echo configure:4458: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4476,7 +4617,7 @@
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for forkpty in -lutil""... $ac_c" 1>&6
-echo "configure:4480: checking for forkpty in -lutil" >&5
+echo "configure:4621: checking for forkpty in -lutil" >&5
ac_lib_var=`echo util'_'forkpty | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -4484,7 +4625,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4488 "configure"
+#line 4629 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -4495,7 +4636,7 @@
forkpty()
; return 0; }
EOF
-if { (eval echo configure:4499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4640: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -4526,12 +4667,12 @@
for ac_func in fseek64 fseeko fstatvfs ftell64 ftello statvfs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4530: checking for $ac_func" >&5
+echo "configure:4671: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4535 "configure"
+#line 4676 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4554,7 +4695,7 @@
; return 0; }
EOF
-if { (eval echo configure:4558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4699: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4582,12 +4723,12 @@
for ac_func in dup2 getcwd strdup strerror memmove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4586: checking for $ac_func" >&5
+echo "configure:4727: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4591 "configure"
+#line 4732 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4610,7 +4751,7 @@
; return 0; }
EOF
-if { (eval echo configure:4614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4755: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4639,12 +4780,12 @@
for ac_func in getpgrp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4643: checking for $ac_func" >&5
+echo "configure:4784: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4648 "configure"
+#line 4789 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4667,7 +4808,7 @@
; return 0; }
EOF
-if { (eval echo configure:4671: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4812: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4686,14 +4827,14 @@
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
-#line 4690 "configure"
+#line 4831 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
getpgrp(0);
; return 0; }
EOF
-if { (eval echo configure:4697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4838: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define GETPGRP_HAVE_ARG 1
@@ -4712,12 +4853,12 @@
for ac_func in setpgrp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4716: checking for $ac_func" >&5
+echo "configure:4857: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4721 "configure"
+#line 4862 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4740,7 +4881,7 @@
; return 0; }
EOF
-if { (eval echo configure:4744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4759,14 +4900,14 @@
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
-#line 4763 "configure"
+#line 4904 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
setpgrp(0,0);
; return 0; }
EOF
-if { (eval echo configure:4770: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4911: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define SETPGRP_HAVE_ARG 1
@@ -4785,12 +4926,12 @@
for ac_func in gettimeofday
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4789: checking for $ac_func" >&5
+echo "configure:4930: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4794 "configure"
+#line 4935 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4813,7 +4954,7 @@
; return 0; }
EOF
-if { (eval echo configure:4817: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4832,14 +4973,14 @@
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
-#line 4836 "configure"
+#line 4977 "configure"
#include "confdefs.h"
#include <sys/time.h>
int main() {
gettimeofday((struct timeval*)0,(struct timezone*)0);
; return 0; }
EOF
-if { (eval echo configure:4843: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4984: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
@@ -4859,12 +5000,12 @@
# checks for structures
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4863: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:5004: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4868 "configure"
+#line 5009 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
@@ -4873,7 +5014,7 @@
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:4877: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5018: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
@@ -4894,12 +5035,12 @@
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:4898: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:5039: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4903 "configure"
+#line 5044 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
@@ -4907,7 +5048,7 @@
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
-if { (eval echo configure:4911: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5052: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
@@ -4928,12 +5069,12 @@
fi
echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6
-echo "configure:4932: checking for tm_zone in struct tm" >&5
+echo "configure:5073: checking for tm_zone in struct tm" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4937 "configure"
+#line 5078 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_cv_struct_tm>
@@ -4941,7 +5082,7 @@
struct tm tm; tm.tm_zone;
; return 0; }
EOF
-if { (eval echo configure:4945: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5086: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm_zone=yes
else
@@ -4961,12 +5102,12 @@
else
echo $ac_n "checking for tzname""... $ac_c" 1>&6
-echo "configure:4965: checking for tzname" >&5
+echo "configure:5106: checking for tzname" >&5
if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4970 "configure"
+#line 5111 "configure"
#include "confdefs.h"
#include <time.h>
#ifndef tzname /* For SGI. */
@@ -4976,7 +5117,7 @@
atoi(*tzname);
; return 0; }
EOF
-if { (eval echo configure:4980: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5121: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_var_tzname=yes
else
@@ -4999,19 +5140,19 @@
echo $ac_n "checking for time.h that defines altzone""... $ac_c" 1>&6
-echo "configure:5003: checking for time.h that defines altzone" >&5
+echo "configure:5144: checking for time.h that defines altzone" >&5
if eval "test \"`echo '$''{'ac_cv_header_time_altzone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5008 "configure"
+#line 5149 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
return altzone;
; return 0; }
EOF
-if { (eval echo configure:5015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5156: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time_altzone=yes
else
@@ -5033,9 +5174,9 @@
was_it_defined=no
echo $ac_n "checking whether sys/select.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:5037: checking whether sys/select.h and sys/time.h may both be included" >&5
+echo "configure:5178: checking whether sys/select.h and sys/time.h may both be included" >&5
cat > conftest.$ac_ext <<EOF
-#line 5039 "configure"
+#line 5180 "configure"
#include "confdefs.h"
#include <sys/types.h>
@@ -5046,7 +5187,7 @@
;
; return 0; }
EOF
-if { (eval echo configure:5050: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5191: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define SYS_SELECT_WITH_SYS_TIME 1
@@ -5062,14 +5203,14 @@
# checks for compiler characteristics
echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6
-echo "configure:5066: checking whether char is unsigned" >&5
+echo "configure:5207: checking whether char is unsigned" >&5
if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$GCC" = yes; then
# GCC predefines this symbol on systems where it applies.
cat > conftest.$ac_ext <<EOF
-#line 5073 "configure"
+#line 5214 "configure"
#include "confdefs.h"
#ifdef __CHAR_UNSIGNED__
yes
@@ -5091,7 +5232,7 @@
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5095 "configure"
+#line 5236 "configure"
#include "confdefs.h"
/* volatile prevents gcc2 from optimizing the test away on sparcs. */
#if !defined(__STDC__) || __STDC__ != 1
@@ -5101,7 +5242,7 @@
volatile char c = 255; exit(c < 0);
}
EOF
-if { (eval echo configure:5105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_char_unsigned=yes
else
@@ -5125,12 +5266,12 @@
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:5129: checking for working const" >&5
+echo "configure:5270: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5134 "configure"
+#line 5275 "configure"
#include "confdefs.h"
int main() {
@@ -5179,7 +5320,7 @@
; return 0; }
EOF
-if { (eval echo configure:5183: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5324: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
@@ -5202,16 +5343,16 @@
works=no
echo $ac_n "checking for working volatile""... $ac_c" 1>&6
-echo "configure:5206: checking for working volatile" >&5
+echo "configure:5347: checking for working volatile" >&5
cat > conftest.$ac_ext <<EOF
-#line 5208 "configure"
+#line 5349 "configure"
#include "confdefs.h"
int main() {
volatile int x; x = 0;
; return 0; }
EOF
-if { (eval echo configure:5215: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5356: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
works=yes
else
@@ -5228,16 +5369,16 @@
works=no
echo $ac_n "checking for working signed char""... $ac_c" 1>&6
-echo "configure:5232: checking for working signed char" >&5
+echo "configure:5373: checking for working signed char" >&5
cat > conftest.$ac_ext <<EOF
-#line 5234 "configure"
+#line 5375 "configure"
#include "confdefs.h"
int main() {
signed char c;
; return 0; }
EOF
-if { (eval echo configure:5241: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5382: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
works=yes
else
@@ -5254,16 +5395,16 @@
have_prototypes=no
echo $ac_n "checking for prototypes""... $ac_c" 1>&6
-echo "configure:5258: checking for prototypes" >&5
+echo "configure:5399: checking for prototypes" >&5
cat > conftest.$ac_ext <<EOF
-#line 5260 "configure"
+#line 5401 "configure"
#include "confdefs.h"
int foo(int x) { return 0; }
int main() {
return foo(10);
; return 0; }
EOF
-if { (eval echo configure:5267: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5408: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_PROTOTYPES 1
@@ -5278,9 +5419,9 @@
works=no
echo $ac_n "checking for variable length prototypes and stdarg.h""... $ac_c" 1>&6
-echo "configure:5282: checking for variable length prototypes and stdarg.h" >&5
+echo "configure:5423: checking for variable length prototypes and stdarg.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 5284 "configure"
+#line 5425 "configure"
#include "confdefs.h"
#include <stdarg.h>
@@ -5297,7 +5438,7 @@
return foo(10, "", 3.14);
; return 0; }
EOF
-if { (eval echo configure:5301: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5442: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_STDARG_PROTOTYPES 1
@@ -5313,16 +5454,16 @@
if test "$have_prototypes" = yes; then
bad_prototypes=no
echo $ac_n "checking for bad exec* prototypes""... $ac_c" 1>&6
-echo "configure:5317: checking for bad exec* prototypes" >&5
+echo "configure:5458: checking for bad exec* prototypes" >&5
cat > conftest.$ac_ext <<EOF
-#line 5319 "configure"
+#line 5460 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
char **t;execve("@",t,t);
; return 0; }
EOF
-if { (eval echo configure:5326: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5467: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
@@ -5339,12 +5480,12 @@
bad_forward=no
echo $ac_n "checking for bad static forward""... $ac_c" 1>&6
-echo "configure:5343: checking for bad static forward" >&5
+echo "configure:5484: checking for bad static forward" >&5
if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5348 "configure"
+#line 5489 "configure"
#include "confdefs.h"
struct s { int a; int b; };
@@ -5360,7 +5501,7 @@
}
EOF
-if { (eval echo configure:5364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5505: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
@@ -5379,9 +5520,9 @@
va_list_is_array=no
echo $ac_n "checking whether va_list is an array""... $ac_c" 1>&6
-echo "configure:5383: checking whether va_list is an array" >&5
+echo "configure:5524: checking whether va_list is an array" >&5
cat > conftest.$ac_ext <<EOF
-#line 5385 "configure"
+#line 5526 "configure"
#include "confdefs.h"
#ifdef HAVE_STDARG_PROTOTYPES
@@ -5394,7 +5535,7 @@
va_list list1, list2; list1 = list2;
; return 0; }
EOF
-if { (eval echo configure:5398: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5539: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
@@ -5410,12 +5551,12 @@
# sigh -- gethostbyname_r is a mess; it can have 3, 5 or 6 arguments :-(
echo $ac_n "checking for gethostbyname_r""... $ac_c" 1>&6
-echo "configure:5414: checking for gethostbyname_r" >&5
+echo "configure:5555: checking for gethostbyname_r" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname_r'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5419 "configure"
+#line 5560 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname_r(); below. */
@@ -5438,7 +5579,7 @@
; return 0; }
EOF
-if { (eval echo configure:5442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5583: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname_r=yes"
else
@@ -5458,11 +5599,11 @@
EOF
echo $ac_n "checking gethostbyname_r with 6 args""... $ac_c" 1>&6
-echo "configure:5462: checking gethostbyname_r with 6 args" >&5
+echo "configure:5603: checking gethostbyname_r with 6 args" >&5
OLD_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS $MY_CPPFLAGS $MY_THREAD_CPPFLAGS $MY_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 5466 "configure"
+#line 5607 "configure"
#include "confdefs.h"
# include <netdb.h>
@@ -5479,7 +5620,7 @@
; return 0; }
EOF
-if { (eval echo configure:5483: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5624: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
@@ -5499,9 +5640,9 @@
echo "$ac_t""no" 1>&6
echo $ac_n "checking gethostbyname_r with 5 args""... $ac_c" 1>&6
-echo "configure:5503: checking gethostbyname_r with 5 args" >&5
+echo "configure:5644: checking gethostbyname_r with 5 args" >&5
cat > conftest.$ac_ext <<EOF
-#line 5505 "configure"
+#line 5646 "configure"
#include "confdefs.h"
# include <netdb.h>
@@ -5518,7 +5659,7 @@
; return 0; }
EOF
-if { (eval echo configure:5522: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5663: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
@@ -5538,9 +5679,9 @@
echo "$ac_t""no" 1>&6
echo $ac_n "checking gethostbyname_r with 3 args""... $ac_c" 1>&6
-echo "configure:5542: checking gethostbyname_r with 3 args" >&5
+echo "configure:5683: checking gethostbyname_r with 3 args" >&5
cat > conftest.$ac_ext <<EOF
-#line 5544 "configure"
+#line 5685 "configure"
#include "confdefs.h"
# include <netdb.h>
@@ -5555,7 +5696,7 @@
; return 0; }
EOF
-if { (eval echo configure:5559: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5700: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
@@ -5591,12 +5732,12 @@
for ac_func in gethostbyname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5595: checking for $ac_func" >&5
+echo "configure:5736: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5600 "configure"
+#line 5741 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -5619,7 +5760,7 @@
; return 0; }
EOF
-if { (eval echo configure:5623: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5764: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -5657,12 +5798,12 @@
# Linux requires this for correct f.p. operations
echo $ac_n "checking for __fpu_control""... $ac_c" 1>&6
-echo "configure:5661: checking for __fpu_control" >&5
+echo "configure:5802: checking for __fpu_control" >&5
if eval "test \"`echo '$''{'ac_cv_func___fpu_control'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5666 "configure"
+#line 5807 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char __fpu_control(); below. */
@@ -5685,7 +5826,7 @@
; return 0; }
EOF
-if { (eval echo configure:5689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func___fpu_control=yes"
else
@@ -5703,7 +5844,7 @@
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for __fpu_control in -lieee""... $ac_c" 1>&6
-echo "configure:5707: checking for __fpu_control in -lieee" >&5
+echo "configure:5848: checking for __fpu_control in -lieee" >&5
ac_lib_var=`echo ieee'_'__fpu_control | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -5711,7 +5852,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lieee $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5715 "configure"
+#line 5856 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -5722,7 +5863,7 @@
__fpu_control()
; return 0; }
EOF
-if { (eval echo configure:5726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5867: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -5755,7 +5896,7 @@
# Check for --with-fpectl
echo $ac_n "checking for --with-fpectl""... $ac_c" 1>&6
-echo "configure:5759: checking for --with-fpectl" >&5
+echo "configure:5900: checking for --with-fpectl" >&5
# Check whether --with-fpectl or --without-fpectl was given.
if test "${with_fpectl+set}" = set; then
withval="$with_fpectl"
@@ -5781,7 +5922,7 @@
*) LIBM=-lm
esac
echo $ac_n "checking for --with-libm=STRING""... $ac_c" 1>&6
-echo "configure:5785: checking for --with-libm=STRING" >&5
+echo "configure:5926: checking for --with-libm=STRING" >&5
# Check whether --with-libm or --without-libm was given.
if test "${with_libm+set}" = set; then
withval="$with_libm"
@@ -5802,7 +5943,7 @@
# check for --with-libc=...
echo $ac_n "checking for --with-libc=STRING""... $ac_c" 1>&6
-echo "configure:5806: checking for --with-libc=STRING" >&5
+echo "configure:5947: checking for --with-libc=STRING" >&5
# Check whether --with-libc or --without-libc was given.
if test "${with_libc+set}" = set; then
withval="$with_libc"
@@ -5828,7 +5969,7 @@
fi
echo $ac_n "checking for --with-check-import-case""... $ac_c" 1>&6
-echo "configure:5832: checking for --with-check-import-case" >&5
+echo "configure:5973: checking for --with-check-import-case" >&5
if test "$with_check_import_case"
then
cat >> confdefs.h <<\EOF
@@ -5846,12 +5987,12 @@
for ac_func in hypot
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5850: checking for $ac_func" >&5
+echo "configure:5991: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5855 "configure"
+#line 5996 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -5874,7 +6015,7 @@
; return 0; }
EOF
-if { (eval echo configure:5878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6019: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -5904,7 +6045,7 @@
# check whether malloc(0) returns NULL or not
echo $ac_n "checking what malloc(0) returns""... $ac_c" 1>&6
-echo "configure:5908: checking what malloc(0) returns" >&5
+echo "configure:6049: checking what malloc(0) returns" >&5
if eval "test \"`echo '$''{'ac_cv_malloc_zero'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -5912,7 +6053,7 @@
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5916 "configure"
+#line 6057 "configure"
#include "confdefs.h"
#include <stdio.h>
#ifdef HAVE_STDLIB
@@ -5931,7 +6072,7 @@
exit(0);
}
EOF
-if { (eval echo configure:5935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6076: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_malloc_zero=nonnull
else
@@ -5957,17 +6098,17 @@
# check for wchar.h
ac_safe=`echo "wchar.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for wchar.h""... $ac_c" 1>&6
-echo "configure:5961: checking for wchar.h" >&5
+echo "configure:6102: checking for wchar.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5966 "configure"
+#line 6107 "configure"
#include "confdefs.h"
#include <wchar.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5971: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6112: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -5997,12 +6138,12 @@
# check for usable wchar_t
usable_wchar_t="unkown"
echo $ac_n "checking for usable wchar_t""... $ac_c" 1>&6
-echo "configure:6001: checking for usable wchar_t" >&5
+echo "configure:6142: checking for usable wchar_t" >&5
if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 6006 "configure"
+#line 6147 "configure"
#include "confdefs.h"
#include "wchar.h"
@@ -6016,7 +6157,7 @@
}
EOF
-if { (eval echo configure:6020: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
cat >> confdefs.h <<\EOF
#define HAVE_USABLE_WCHAR_T 1
@@ -6035,14 +6176,14 @@
# check for endianness
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:6039: checking whether byte ordering is bigendian" >&5
+echo "configure:6180: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 6046 "configure"
+#line 6187 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
@@ -6053,11 +6194,11 @@
#endif
; return 0; }
EOF
-if { (eval echo configure:6057: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6198: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 6061 "configure"
+#line 6202 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
@@ -6068,7 +6209,7 @@
#endif
; return 0; }
EOF
-if { (eval echo configure:6072: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6213: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
@@ -6088,7 +6229,7 @@
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 6092 "configure"
+#line 6233 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
@@ -6101,7 +6242,7 @@
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:6105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
@@ -6128,7 +6269,7 @@
# Check whether right shifting a negative integer extends the sign bit
# or fills with zeros (like the Cray J90, according to Tim Peters).
echo $ac_n "checking whether right shift extends the sign bit""... $ac_c" 1>&6
-echo "configure:6132: checking whether right shift extends the sign bit" >&5
+echo "configure:6273: checking whether right shift extends the sign bit" >&5
if eval "test \"`echo '$''{'ac_cv_rshift_extends_sign'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -6137,7 +6278,7 @@
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 6141 "configure"
+#line 6282 "configure"
#include "confdefs.h"
int main()
@@ -6146,7 +6287,7 @@
}
EOF
-if { (eval echo configure:6150: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_rshift_extends_sign=yes
else
@@ -6171,13 +6312,13 @@
# check for getc_unlocked and related locking functions
echo $ac_n "checking for getc_unlocked() and friends""... $ac_c" 1>&6
-echo "configure:6175: checking for getc_unlocked() and friends" >&5
+echo "configure:6316: checking for getc_unlocked() and friends" >&5
if eval "test \"`echo '$''{'ac_cv_have_getc_unlocked'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6181 "configure"
+#line 6322 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
@@ -6189,7 +6330,7 @@
; return 0; }
EOF
-if { (eval echo configure:6193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_have_getc_unlocked=yes
else
@@ -6218,12 +6359,12 @@
#endif
EOF
echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
-echo "configure:6222: checking for socklen_t" >&5
+echo "configure:6363: checking for socklen_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6227 "configure"
+#line 6368 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -6252,7 +6393,7 @@
echo $ac_n "checking for Modules/Setup""... $ac_c" 1>&6
-echo "configure:6256: checking for Modules/Setup" >&5
+echo "configure:6397: checking for Modules/Setup" >&5
if test ! -f Modules/Setup ; then
if test ! -d Modules ; then
mkdir Modules
@@ -6429,11 +6570,16 @@
s%@LINKFORSHARED@%$LINKFORSHARED%g
s%@USE_NCURSES_MODULE@%$USE_NCURSES_MODULE%g
s%@USE_READLINE_MODULE@%$USE_READLINE_MODULE%g
+s%@USE_GDBM_MODULE@%$USE_GDBM_MODULE%g
+s%@HAVE_LIBGDBM@%$HAVE_LIBGDBM%g
+s%@USE_NDBM_MODULE@%$USE_NDBM_MODULE%g
+s%@HAVE_LIBNDBM@%$HAVE_LIBNDBM%g
+s%@USE_CRYPT_MODULE@%$USE_CRYPT_MODULE%g
+s%@HAVE_LIBCRYPT@%$HAVE_LIBCRYPT%g
s%@USE_THREAD_MODULE@%$USE_THREAD_MODULE%g
s%@LDLAST@%$LDLAST%g
s%@USE_GC_MODULE@%$USE_GC_MODULE%g
s%@USE_DBM_MODULE@%$USE_DBM_MODULE%g
-s%@HAVE_LIBNDBM@%$HAVE_LIBNDBM%g
s%@USE_BSDDB_MODULE@%$USE_BSDDB_MODULE%g
s%@HAVE_LIBDB@%$HAVE_LIBDB%g
s%@DLINCLDIR@%$DLINCLDIR%g