| |
| /* Return the initial module search path. */ |
| /* Used by DOS, Windows 3.1, Windows 95/98, Windows NT. */ |
| |
| /* ---------------------------------------------------------------- |
| PATH RULES FOR WINDOWS: |
| This describes how sys.path is formed on Windows. It describes the |
| functionality, not the implementation (ie, the order in which these |
| are actually fetched is different). The presence of a python._pth or |
| pythonXY._pth file alongside the program overrides these rules - see |
| below. |
| |
| * Python always adds an empty entry at the start, which corresponds |
| to the current directory. |
| |
| * If the PYTHONPATH env. var. exists, its entries are added next. |
| |
| * We look in the registry for "application paths" - that is, sub-keys |
| under the main PythonPath registry key. These are added next (the |
| order of sub-key processing is undefined). |
| HKEY_CURRENT_USER is searched and added first. |
| HKEY_LOCAL_MACHINE is searched and added next. |
| (Note that all known installers only use HKLM, so HKCU is typically |
| empty) |
| |
| * We attempt to locate the "Python Home" - if the PYTHONHOME env var |
| is set, we believe it. Otherwise, we use the path of our host .EXE's |
| to try and locate one of our "landmarks" and deduce our home. |
| - If we DO have a Python Home: The relevant sub-directories (Lib, |
| DLLs, etc) are based on the Python Home |
| - If we DO NOT have a Python Home, the core Python Path is |
| loaded from the registry. This is the main PythonPath key, |
| and both HKLM and HKCU are combined to form the path) |
| |
| * Iff - we can not locate the Python Home, have not had a PYTHONPATH |
| specified, and can't locate any Registry entries (ie, we have _nothing_ |
| we can assume is a good path), a default path with relative entries is |
| used (eg. .\Lib;.\DLLs, etc) |
| |
| |
| If a '._pth' file exists adjacent to the executable with the same base name |
| (e.g. python._pth adjacent to python.exe) or adjacent to the shared library |
| (e.g. python36._pth adjacent to python36.dll), it is used in preference to |
| the above process. The shared library file takes precedence over the |
| executable. The path file must contain a list of paths to add to sys.path, |
| one per line. Each path is relative to the directory containing the file. |
| Blank lines and comments beginning with '#' are permitted. |
| |
| In the presence of this ._pth file, no other paths are added to the search |
| path, the registry finder is not enabled, site.py is not imported and |
| isolated mode is enabled. The site package can be enabled by including a |
| line reading "import site"; no other imports are recognized. Any invalid |
| entry (other than directories that do not exist) will result in immediate |
| termination of the program. |
| |
| |
| The end result of all this is: |
| * When running python.exe, or any other .exe in the main Python directory |
| (either an installed version, or directly from the PCbuild directory), |
| the core path is deduced, and the core paths in the registry are |
| ignored. Other "application paths" in the registry are always read. |
| |
| * When Python is hosted in another exe (different directory, embedded via |
| COM, etc), the Python Home will not be deduced, so the core path from |
| the registry is used. Other "application paths" in the registry are |
| always read. |
| |
| * If Python can't find its home and there is no registry (eg, frozen |
| exe, some very strange installation setup) you get a path with |
| some default, but relative, paths. |
| |
| * An embedding application can use Py_SetPath() to override all of |
| these automatic path computations. |
| |
| * An install of Python can fully specify the contents of sys.path using |
| either a 'EXENAME._pth' or 'DLLNAME._pth' file, optionally including |
| "import site" to enable the site module. |
| |
| ---------------------------------------------------------------- */ |
| |
| |
| #include "Python.h" |
| #include "internal/pystate.h" |
| #include "osdefs.h" |
| #include <wchar.h> |
| |
| #ifndef MS_WINDOWS |
| #error getpathp.c should only be built on Windows |
| #endif |
| |
| #include <windows.h> |
| #include <Shlwapi.h> |
| |
| #ifdef HAVE_SYS_TYPES_H |
| #include <sys/types.h> |
| #endif /* HAVE_SYS_TYPES_H */ |
| |
| #ifdef HAVE_SYS_STAT_H |
| #include <sys/stat.h> |
| #endif /* HAVE_SYS_STAT_H */ |
| |
| #include <string.h> |
| |
| /* Search in some common locations for the associated Python libraries. |
| * |
| * Py_GetPath() tries to return a sensible Python module search path. |
| * |
| * The approach is an adaptation for Windows of the strategy used in |
| * ../Modules/getpath.c; it uses the Windows Registry as one of its |
| * information sources. |
| * |
| * Py_SetPath() can be used to override this mechanism. Call Py_SetPath |
| * with a semicolon separated path prior to calling Py_Initialize. |
| */ |
| |
| #ifndef LANDMARK |
| #define LANDMARK L"lib\\os.py" |
| #endif |
| |
| typedef struct { |
| const wchar_t *path_env; /* PATH environment variable */ |
| const wchar_t *home; /* PYTHONHOME environment variable */ |
| |
| /* Registry key "Software\Python\PythonCore\PythonPath" */ |
| wchar_t *machine_path; /* from HKEY_LOCAL_MACHINE */ |
| wchar_t *user_path; /* from HKEY_CURRENT_USER */ |
| |
| wchar_t argv0_path[MAXPATHLEN+1]; |
| wchar_t zip_path[MAXPATHLEN+1]; |
| } PyCalculatePath; |
| |
| |
| /* determine if "ch" is a separator character */ |
| static int |
| is_sep(wchar_t ch) |
| { |
| #ifdef ALTSEP |
| return ch == SEP || ch == ALTSEP; |
| #else |
| return ch == SEP; |
| #endif |
| } |
| |
| |
| /* assumes 'dir' null terminated in bounds. Never writes |
| beyond existing terminator. */ |
| static void |
| reduce(wchar_t *dir) |
| { |
| size_t i = wcsnlen_s(dir, MAXPATHLEN+1); |
| if (i >= MAXPATHLEN+1) { |
| Py_FatalError("buffer overflow in getpathp.c's reduce()"); |
| } |
| |
| while (i > 0 && !is_sep(dir[i])) |
| --i; |
| dir[i] = '\0'; |
| } |
| |
| |
| static int |
| change_ext(wchar_t *dest, const wchar_t *src, const wchar_t *ext) |
| { |
| size_t src_len = wcsnlen_s(src, MAXPATHLEN+1); |
| size_t i = src_len; |
| if (i >= MAXPATHLEN+1) { |
| Py_FatalError("buffer overflow in getpathp.c's reduce()"); |
| } |
| |
| while (i > 0 && src[i] != '.' && !is_sep(src[i])) |
| --i; |
| |
| if (i == 0) { |
| dest[0] = '\0'; |
| return -1; |
| } |
| |
| if (is_sep(src[i])) { |
| i = src_len; |
| } |
| |
| if (wcsncpy_s(dest, MAXPATHLEN+1, src, i) || |
| wcscat_s(dest, MAXPATHLEN+1, ext)) |
| { |
| dest[0] = '\0'; |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int |
| exists(const wchar_t *filename) |
| { |
| return GetFileAttributesW(filename) != 0xFFFFFFFF; |
| } |
| |
| |
| /* Is module -- check for .pyc too. |
| Assumes 'filename' MAXPATHLEN+1 bytes long - |
| may extend 'filename' by one character. */ |
| static int |
| ismodule(wchar_t *filename, int update_filename) |
| { |
| size_t n; |
| |
| if (exists(filename)) { |
| return 1; |
| } |
| |
| /* Check for the compiled version of prefix. */ |
| n = wcsnlen_s(filename, MAXPATHLEN+1); |
| if (n < MAXPATHLEN) { |
| int exist = 0; |
| filename[n] = L'c'; |
| filename[n + 1] = L'\0'; |
| exist = exists(filename); |
| if (!update_filename) { |
| filename[n] = L'\0'; |
| } |
| return exist; |
| } |
| return 0; |
| } |
| |
| |
| /* Add a path component, by appending stuff to buffer. |
| buffer must have at least MAXPATHLEN + 1 bytes allocated, and contain a |
| NUL-terminated string with no more than MAXPATHLEN characters (not counting |
| the trailing NUL). It's a fatal error if it contains a string longer than |
| that (callers must be careful!). If these requirements are met, it's |
| guaranteed that buffer will still be a NUL-terminated string with no more |
| than MAXPATHLEN characters at exit. If stuff is too long, only as much of |
| stuff as fits will be appended. |
| */ |
| |
| static int _PathCchCombineEx_Initialized = 0; |
| typedef HRESULT(__stdcall *PPathCchCombineEx) (PWSTR pszPathOut, size_t cchPathOut, |
| PCWSTR pszPathIn, PCWSTR pszMore, |
| unsigned long dwFlags); |
| static PPathCchCombineEx _PathCchCombineEx; |
| |
| static void |
| join(wchar_t *buffer, const wchar_t *stuff) |
| { |
| if (_PathCchCombineEx_Initialized == 0) { |
| HMODULE pathapi = LoadLibraryW(L"api-ms-win-core-path-l1-1-0.dll"); |
| if (pathapi) { |
| _PathCchCombineEx = (PPathCchCombineEx)GetProcAddress(pathapi, "PathCchCombineEx"); |
| } |
| else { |
| _PathCchCombineEx = NULL; |
| } |
| _PathCchCombineEx_Initialized = 1; |
| } |
| |
| if (_PathCchCombineEx) { |
| if (FAILED(_PathCchCombineEx(buffer, MAXPATHLEN+1, buffer, stuff, 0))) { |
| Py_FatalError("buffer overflow in getpathp.c's join()"); |
| } |
| } else { |
| if (!PathCombineW(buffer, buffer, stuff)) { |
| Py_FatalError("buffer overflow in getpathp.c's join()"); |
| } |
| } |
| } |
| |
| |
| /* gotlandmark only called by search_for_prefix, which ensures |
| 'prefix' is null terminated in bounds. join() ensures |
| 'landmark' can not overflow prefix if too long. */ |
| static int |
| gotlandmark(wchar_t *prefix, const wchar_t *landmark) |
| { |
| int ok; |
| Py_ssize_t n = wcsnlen_s(prefix, MAXPATHLEN); |
| |
| join(prefix, landmark); |
| ok = ismodule(prefix, FALSE); |
| prefix[n] = '\0'; |
| return ok; |
| } |
| |
| |
| /* assumes argv0_path is MAXPATHLEN+1 bytes long, already \0 term'd. |
| assumption provided by only caller, calculate_path_impl() */ |
| static int |
| search_for_prefix(wchar_t *prefix, const wchar_t *argv0_path, const wchar_t *landmark) |
| { |
| /* Search from argv0_path, until landmark is found */ |
| wcscpy_s(prefix, MAXPATHLEN + 1, argv0_path); |
| do { |
| if (gotlandmark(prefix, landmark)) { |
| return 1; |
| } |
| reduce(prefix); |
| } while (prefix[0]); |
| return 0; |
| } |
| |
| |
| #ifdef Py_ENABLE_SHARED |
| |
| /* a string loaded from the DLL at startup.*/ |
| extern const char *PyWin_DLLVersionString; |
| |
| /* Load a PYTHONPATH value from the registry. |
| Load from either HKEY_LOCAL_MACHINE or HKEY_CURRENT_USER. |
| |
| Works in both Unicode and 8bit environments. Only uses the |
| Ex family of functions so it also works with Windows CE. |
| |
| Returns NULL, or a pointer that should be freed. |
| |
| XXX - this code is pretty strange, as it used to also |
| work on Win16, where the buffer sizes werent available |
| in advance. It could be simplied now Win16/Win32s is dead! |
| */ |
| static wchar_t * |
| getpythonregpath(HKEY keyBase, int skipcore) |
| { |
| HKEY newKey = 0; |
| DWORD dataSize = 0; |
| DWORD numKeys = 0; |
| LONG rc; |
| wchar_t *retval = NULL; |
| WCHAR *dataBuf = NULL; |
| static const WCHAR keyPrefix[] = L"Software\\Python\\PythonCore\\"; |
| static const WCHAR keySuffix[] = L"\\PythonPath"; |
| size_t versionLen, keyBufLen; |
| DWORD index; |
| WCHAR *keyBuf = NULL; |
| WCHAR *keyBufPtr; |
| WCHAR **ppPaths = NULL; |
| |
| /* Tried to use sysget("winver") but here is too early :-( */ |
| versionLen = strlen(PyWin_DLLVersionString); |
| /* Space for all the chars, plus one \0 */ |
| keyBufLen = sizeof(keyPrefix) + |
| sizeof(WCHAR)*(versionLen-1) + |
| sizeof(keySuffix); |
| keyBuf = keyBufPtr = PyMem_RawMalloc(keyBufLen); |
| if (keyBuf==NULL) { |
| goto done; |
| } |
| |
| memcpy_s(keyBufPtr, keyBufLen, keyPrefix, sizeof(keyPrefix)-sizeof(WCHAR)); |
| keyBufPtr += Py_ARRAY_LENGTH(keyPrefix) - 1; |
| mbstowcs(keyBufPtr, PyWin_DLLVersionString, versionLen); |
| keyBufPtr += versionLen; |
| /* NULL comes with this one! */ |
| memcpy(keyBufPtr, keySuffix, sizeof(keySuffix)); |
| /* Open the root Python key */ |
| rc=RegOpenKeyExW(keyBase, |
| keyBuf, /* subkey */ |
| 0, /* reserved */ |
| KEY_READ, |
| &newKey); |
| if (rc!=ERROR_SUCCESS) { |
| goto done; |
| } |
| /* Find out how big our core buffer is, and how many subkeys we have */ |
| rc = RegQueryInfoKey(newKey, NULL, NULL, NULL, &numKeys, NULL, NULL, |
| NULL, NULL, &dataSize, NULL, NULL); |
| if (rc!=ERROR_SUCCESS) { |
| goto done; |
| } |
| if (skipcore) { |
| dataSize = 0; /* Only count core ones if we want them! */ |
| } |
| /* Allocate a temp array of char buffers, so we only need to loop |
| reading the registry once |
| */ |
| ppPaths = PyMem_RawMalloc( sizeof(WCHAR *) * numKeys ); |
| if (ppPaths==NULL) { |
| goto done; |
| } |
| memset(ppPaths, 0, sizeof(WCHAR *) * numKeys); |
| /* Loop over all subkeys, allocating a temp sub-buffer. */ |
| for(index=0;index<numKeys;index++) { |
| WCHAR keyBuf[MAX_PATH+1]; |
| HKEY subKey = 0; |
| DWORD reqdSize = MAX_PATH+1; |
| /* Get the sub-key name */ |
| DWORD rc = RegEnumKeyExW(newKey, index, keyBuf, &reqdSize, |
| NULL, NULL, NULL, NULL ); |
| if (rc!=ERROR_SUCCESS) { |
| goto done; |
| } |
| /* Open the sub-key */ |
| rc=RegOpenKeyExW(newKey, |
| keyBuf, /* subkey */ |
| 0, /* reserved */ |
| KEY_READ, |
| &subKey); |
| if (rc!=ERROR_SUCCESS) { |
| goto done; |
| } |
| /* Find the value of the buffer size, malloc, then read it */ |
| RegQueryValueExW(subKey, NULL, 0, NULL, NULL, &reqdSize); |
| if (reqdSize) { |
| ppPaths[index] = PyMem_RawMalloc(reqdSize); |
| if (ppPaths[index]) { |
| RegQueryValueExW(subKey, NULL, 0, NULL, |
| (LPBYTE)ppPaths[index], |
| &reqdSize); |
| dataSize += reqdSize + 1; /* 1 for the ";" */ |
| } |
| } |
| RegCloseKey(subKey); |
| } |
| |
| /* return null if no path to return */ |
| if (dataSize == 0) { |
| goto done; |
| } |
| |
| /* original datasize from RegQueryInfo doesn't include the \0 */ |
| dataBuf = PyMem_RawMalloc((dataSize+1) * sizeof(WCHAR)); |
| if (dataBuf) { |
| WCHAR *szCur = dataBuf; |
| /* Copy our collected strings */ |
| for (index=0;index<numKeys;index++) { |
| if (index > 0) { |
| *(szCur++) = L';'; |
| dataSize--; |
| } |
| if (ppPaths[index]) { |
| Py_ssize_t len = wcslen(ppPaths[index]); |
| wcsncpy(szCur, ppPaths[index], len); |
| szCur += len; |
| assert(dataSize > (DWORD)len); |
| dataSize -= (DWORD)len; |
| } |
| } |
| if (skipcore) { |
| *szCur = '\0'; |
| } |
| else { |
| /* If we have no values, we don't need a ';' */ |
| if (numKeys) { |
| *(szCur++) = L';'; |
| dataSize--; |
| } |
| /* Now append the core path entries - |
| this will include the NULL |
| */ |
| rc = RegQueryValueExW(newKey, NULL, 0, NULL, |
| (LPBYTE)szCur, &dataSize); |
| if (rc != ERROR_SUCCESS) { |
| PyMem_RawFree(dataBuf); |
| goto done; |
| } |
| } |
| /* And set the result - caller must free */ |
| retval = dataBuf; |
| } |
| done: |
| /* Loop freeing my temp buffers */ |
| if (ppPaths) { |
| for(index=0; index<numKeys; index++) |
| PyMem_RawFree(ppPaths[index]); |
| PyMem_RawFree(ppPaths); |
| } |
| if (newKey) { |
| RegCloseKey(newKey); |
| } |
| PyMem_RawFree(keyBuf); |
| return retval; |
| } |
| #endif /* Py_ENABLE_SHARED */ |
| |
| |
| static _PyInitError |
| get_dll_path(PyCalculatePath *calculate, _PyPathConfig *config) |
| { |
| wchar_t dll_path[MAXPATHLEN+1]; |
| memset(dll_path, 0, sizeof(dll_path)); |
| |
| #ifdef Py_ENABLE_SHARED |
| extern HANDLE PyWin_DLLhModule; |
| if (PyWin_DLLhModule) { |
| if (!GetModuleFileNameW(PyWin_DLLhModule, dll_path, MAXPATHLEN)) { |
| dll_path[0] = 0; |
| } |
| } |
| #else |
| dll_path[0] = 0; |
| #endif |
| |
| config->dll_path = _PyMem_RawWcsdup(dll_path); |
| if (config->dll_path == NULL) { |
| return _Py_INIT_NO_MEMORY(); |
| } |
| return _Py_INIT_OK(); |
| } |
| |
| |
| static _PyInitError |
| get_program_full_path(const _PyCoreConfig *core_config, |
| PyCalculatePath *calculate, _PyPathConfig *config) |
| { |
| wchar_t program_full_path[MAXPATHLEN+1]; |
| memset(program_full_path, 0, sizeof(program_full_path)); |
| |
| if (GetModuleFileNameW(NULL, program_full_path, MAXPATHLEN)) { |
| goto done; |
| } |
| |
| /* If there is no slash in the argv0 path, then we have to |
| * assume python is on the user's $PATH, since there's no |
| * other way to find a directory to start the search from. If |
| * $PATH isn't exported, you lose. |
| */ |
| #ifdef ALTSEP |
| if (wcschr(core_config->program_name, SEP) || |
| wcschr(core_config->program_name, ALTSEP)) |
| #else |
| if (wcschr(core_config->program_name, SEP)) |
| #endif |
| { |
| wcsncpy(program_full_path, core_config->program_name, MAXPATHLEN); |
| } |
| else if (calculate->path_env) { |
| const wchar_t *path = calculate->path_env; |
| while (1) { |
| const wchar_t *delim = wcschr(path, DELIM); |
| |
| if (delim) { |
| size_t len = delim - path; |
| /* ensure we can't overwrite buffer */ |
| len = min(MAXPATHLEN,len); |
| wcsncpy(program_full_path, path, len); |
| program_full_path[len] = '\0'; |
| } |
| else { |
| wcsncpy(program_full_path, path, MAXPATHLEN); |
| } |
| |
| /* join() is safe for MAXPATHLEN+1 size buffer */ |
| join(program_full_path, core_config->program_name); |
| if (exists(program_full_path)) { |
| break; |
| } |
| |
| if (!delim) { |
| program_full_path[0] = '\0'; |
| break; |
| } |
| path = delim + 1; |
| } |
| } |
| else { |
| program_full_path[0] = '\0'; |
| } |
| |
| done: |
| config->program_full_path = _PyMem_RawWcsdup(program_full_path); |
| if (config->program_full_path == NULL) { |
| return _Py_INIT_NO_MEMORY(); |
| } |
| return _Py_INIT_OK(); |
| } |
| |
| |
| static int |
| read_pth_file(_PyPathConfig *config, wchar_t *prefix, const wchar_t *path, |
| int *isolated, int *nosite) |
| { |
| FILE *sp_file = _Py_wfopen(path, L"r"); |
| if (sp_file == NULL) { |
| return 0; |
| } |
| |
| wcscpy_s(prefix, MAXPATHLEN+1, path); |
| reduce(prefix); |
| *isolated = 1; |
| *nosite = 1; |
| |
| size_t bufsiz = MAXPATHLEN; |
| size_t prefixlen = wcslen(prefix); |
| |
| wchar_t *buf = (wchar_t*)PyMem_RawMalloc(bufsiz * sizeof(wchar_t)); |
| buf[0] = '\0'; |
| |
| while (!feof(sp_file)) { |
| char line[MAXPATHLEN + 1]; |
| char *p = fgets(line, MAXPATHLEN + 1, sp_file); |
| if (!p) { |
| break; |
| } |
| if (*p == '\0' || *p == '\r' || *p == '\n' || *p == '#') { |
| continue; |
| } |
| while (*++p) { |
| if (*p == '\r' || *p == '\n') { |
| *p = '\0'; |
| break; |
| } |
| } |
| |
| if (strcmp(line, "import site") == 0) { |
| *nosite = 0; |
| continue; |
| } else if (strncmp(line, "import ", 7) == 0) { |
| Py_FatalError("only 'import site' is supported in ._pth file"); |
| } |
| |
| DWORD wn = MultiByteToWideChar(CP_UTF8, 0, line, -1, NULL, 0); |
| wchar_t *wline = (wchar_t*)PyMem_RawMalloc((wn + 1) * sizeof(wchar_t)); |
| wn = MultiByteToWideChar(CP_UTF8, 0, line, -1, wline, wn + 1); |
| wline[wn] = '\0'; |
| |
| size_t usedsiz = wcslen(buf); |
| while (usedsiz + wn + prefixlen + 4 > bufsiz) { |
| bufsiz += MAXPATHLEN; |
| buf = (wchar_t*)PyMem_RawRealloc(buf, (bufsiz + 1) * sizeof(wchar_t)); |
| if (!buf) { |
| PyMem_RawFree(wline); |
| goto error; |
| } |
| } |
| |
| if (usedsiz) { |
| wcscat_s(buf, bufsiz, L";"); |
| usedsiz += 1; |
| } |
| |
| errno_t result; |
| _Py_BEGIN_SUPPRESS_IPH |
| result = wcscat_s(buf, bufsiz, prefix); |
| _Py_END_SUPPRESS_IPH |
| if (result == EINVAL) { |
| Py_FatalError("invalid argument during ._pth processing"); |
| } else if (result == ERANGE) { |
| Py_FatalError("buffer overflow during ._pth processing"); |
| } |
| wchar_t *b = &buf[usedsiz]; |
| join(b, wline); |
| |
| PyMem_RawFree(wline); |
| } |
| |
| fclose(sp_file); |
| config->module_search_path = buf; |
| return 1; |
| |
| error: |
| PyMem_RawFree(buf); |
| fclose(sp_file); |
| return 0; |
| } |
| |
| |
| static void |
| calculate_init(PyCalculatePath *calculate, |
| const _PyCoreConfig *core_config) |
| { |
| calculate->home = core_config->home; |
| calculate->path_env = _wgetenv(L"PATH"); |
| } |
| |
| |
| static int |
| get_pth_filename(wchar_t *spbuffer, _PyPathConfig *config) |
| { |
| if (config->dll_path[0]) { |
| if (!change_ext(spbuffer, config->dll_path, L"._pth") && |
| exists(spbuffer)) |
| { |
| return 1; |
| } |
| } |
| if (config->program_full_path[0]) { |
| if (!change_ext(spbuffer, config->program_full_path, L"._pth") && |
| exists(spbuffer)) |
| { |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| |
| static int |
| calculate_pth_file(_PyPathConfig *config, wchar_t *prefix) |
| { |
| wchar_t spbuffer[MAXPATHLEN+1]; |
| |
| if (!get_pth_filename(spbuffer, config)) { |
| return 0; |
| } |
| |
| /* FIXME, bpo-32030: Global configuration variables should not be modified |
| here, _PyPathConfig_Init() is called early in Python initialization: |
| see pymain_cmdline(). */ |
| return read_pth_file(config, prefix, spbuffer, |
| &Py_IsolatedFlag, &Py_NoSiteFlag); |
| } |
| |
| |
| /* Search for an environment configuration file, first in the |
| executable's directory and then in the parent directory. |
| If found, open it for use when searching for prefixes. |
| */ |
| static void |
| calculate_pyvenv_file(PyCalculatePath *calculate) |
| { |
| wchar_t envbuffer[MAXPATHLEN+1]; |
| const wchar_t *env_cfg = L"pyvenv.cfg"; |
| |
| wcscpy_s(envbuffer, MAXPATHLEN+1, calculate->argv0_path); |
| join(envbuffer, env_cfg); |
| |
| FILE *env_file = _Py_wfopen(envbuffer, L"r"); |
| if (env_file == NULL) { |
| errno = 0; |
| |
| reduce(envbuffer); |
| reduce(envbuffer); |
| join(envbuffer, env_cfg); |
| |
| env_file = _Py_wfopen(envbuffer, L"r"); |
| if (env_file == NULL) { |
| errno = 0; |
| } |
| } |
| |
| if (env_file == NULL) { |
| return; |
| } |
| |
| /* Look for a 'home' variable and set argv0_path to it, if found */ |
| wchar_t tmpbuffer[MAXPATHLEN+1]; |
| if (_Py_FindEnvConfigValue(env_file, L"home", tmpbuffer, MAXPATHLEN)) { |
| wcscpy_s(calculate->argv0_path, MAXPATHLEN+1, tmpbuffer); |
| } |
| fclose(env_file); |
| } |
| |
| |
| #define INIT_ERR_BUFFER_OVERFLOW() _Py_INIT_ERR("buffer overflow") |
| |
| |
| static void |
| calculate_home_prefix(PyCalculatePath *calculate, wchar_t *prefix) |
| { |
| if (calculate->home == NULL || *calculate->home == '\0') { |
| if (calculate->zip_path[0] && exists(calculate->zip_path)) { |
| wcscpy_s(prefix, MAXPATHLEN+1, calculate->zip_path); |
| reduce(prefix); |
| calculate->home = prefix; |
| } |
| else if (search_for_prefix(prefix, calculate->argv0_path, LANDMARK)) { |
| calculate->home = prefix; |
| } |
| else { |
| calculate->home = NULL; |
| } |
| } |
| else { |
| wcscpy_s(prefix, MAXPATHLEN+1, calculate->home); |
| } |
| } |
| |
| |
| static _PyInitError |
| calculate_module_search_path(const _PyCoreConfig *core_config, |
| PyCalculatePath *calculate, _PyPathConfig *config, |
| wchar_t *prefix) |
| { |
| int skiphome = calculate->home==NULL ? 0 : 1; |
| #ifdef Py_ENABLE_SHARED |
| calculate->machine_path = getpythonregpath(HKEY_LOCAL_MACHINE, skiphome); |
| calculate->user_path = getpythonregpath(HKEY_CURRENT_USER, skiphome); |
| #endif |
| /* We only use the default relative PYTHONPATH if we haven't |
| anything better to use! */ |
| int skipdefault = (core_config->module_search_path_env != NULL || |
| calculate->home != NULL || |
| calculate->machine_path != NULL || |
| calculate->user_path != NULL); |
| |
| /* We need to construct a path from the following parts. |
| (1) the PYTHONPATH environment variable, if set; |
| (2) for Win32, the zip archive file path; |
| (3) for Win32, the machine_path and user_path, if set; |
| (4) the PYTHONPATH config macro, with the leading "." |
| of each component replaced with home, if set; |
| (5) the directory containing the executable (argv0_path). |
| The length calculation calculates #4 first. |
| Extra rules: |
| - If PYTHONHOME is set (in any way) item (3) is ignored. |
| - If registry values are used, (4) and (5) are ignored. |
| */ |
| |
| /* Calculate size of return buffer */ |
| size_t bufsz = 0; |
| if (calculate->home != NULL) { |
| const wchar_t *p; |
| bufsz = 1; |
| for (p = PYTHONPATH; *p; p++) { |
| if (*p == DELIM) { |
| bufsz++; /* number of DELIM plus one */ |
| } |
| } |
| bufsz *= wcslen(calculate->home); |
| } |
| bufsz += wcslen(PYTHONPATH) + 1; |
| bufsz += wcslen(calculate->argv0_path) + 1; |
| if (calculate->user_path) { |
| bufsz += wcslen(calculate->user_path) + 1; |
| } |
| if (calculate->machine_path) { |
| bufsz += wcslen(calculate->machine_path) + 1; |
| } |
| bufsz += wcslen(calculate->zip_path) + 1; |
| if (core_config->module_search_path_env != NULL) { |
| bufsz += wcslen(core_config->module_search_path_env) + 1; |
| } |
| |
| wchar_t *buf, *start_buf; |
| buf = PyMem_RawMalloc(bufsz * sizeof(wchar_t)); |
| if (buf == NULL) { |
| /* We can't exit, so print a warning and limp along */ |
| fprintf(stderr, "Can't malloc dynamic PYTHONPATH.\n"); |
| if (core_config->module_search_path_env) { |
| fprintf(stderr, "Using environment $PYTHONPATH.\n"); |
| config->module_search_path = core_config->module_search_path_env; |
| } |
| else { |
| fprintf(stderr, "Using default static path.\n"); |
| config->module_search_path = PYTHONPATH; |
| } |
| return _Py_INIT_OK(); |
| } |
| start_buf = buf; |
| |
| if (core_config->module_search_path_env) { |
| if (wcscpy_s(buf, bufsz - (buf - start_buf), |
| core_config->module_search_path_env)) { |
| return INIT_ERR_BUFFER_OVERFLOW(); |
| } |
| buf = wcschr(buf, L'\0'); |
| *buf++ = DELIM; |
| } |
| if (calculate->zip_path[0]) { |
| if (wcscpy_s(buf, bufsz - (buf - start_buf), calculate->zip_path)) { |
| return INIT_ERR_BUFFER_OVERFLOW(); |
| } |
| buf = wcschr(buf, L'\0'); |
| *buf++ = DELIM; |
| } |
| if (calculate->user_path) { |
| if (wcscpy_s(buf, bufsz - (buf - start_buf), calculate->user_path)) { |
| return INIT_ERR_BUFFER_OVERFLOW(); |
| } |
| buf = wcschr(buf, L'\0'); |
| *buf++ = DELIM; |
| } |
| if (calculate->machine_path) { |
| if (wcscpy_s(buf, bufsz - (buf - start_buf), calculate->machine_path)) { |
| return INIT_ERR_BUFFER_OVERFLOW(); |
| } |
| buf = wcschr(buf, L'\0'); |
| *buf++ = DELIM; |
| } |
| if (calculate->home == NULL) { |
| if (!skipdefault) { |
| if (wcscpy_s(buf, bufsz - (buf - start_buf), PYTHONPATH)) { |
| return INIT_ERR_BUFFER_OVERFLOW(); |
| } |
| buf = wcschr(buf, L'\0'); |
| *buf++ = DELIM; |
| } |
| } else { |
| const wchar_t *p = PYTHONPATH; |
| const wchar_t *q; |
| size_t n; |
| for (;;) { |
| q = wcschr(p, DELIM); |
| if (q == NULL) { |
| n = wcslen(p); |
| } |
| else { |
| n = q-p; |
| } |
| if (p[0] == '.' && is_sep(p[1])) { |
| if (wcscpy_s(buf, bufsz - (buf - start_buf), calculate->home)) { |
| return INIT_ERR_BUFFER_OVERFLOW(); |
| } |
| buf = wcschr(buf, L'\0'); |
| p++; |
| n--; |
| } |
| wcsncpy(buf, p, n); |
| buf += n; |
| *buf++ = DELIM; |
| if (q == NULL) { |
| break; |
| } |
| p = q+1; |
| } |
| } |
| if (calculate->argv0_path) { |
| wcscpy(buf, calculate->argv0_path); |
| buf = wcschr(buf, L'\0'); |
| *buf++ = DELIM; |
| } |
| *(buf - 1) = L'\0'; |
| |
| /* Now to pull one last hack/trick. If sys.prefix is |
| empty, then try and find it somewhere on the paths |
| we calculated. We scan backwards, as our general policy |
| is that Python core directories are at the *end* of |
| sys.path. We assume that our "lib" directory is |
| on the path, and that our 'prefix' directory is |
| the parent of that. |
| */ |
| if (prefix[0] == L'\0') { |
| wchar_t lookBuf[MAXPATHLEN+1]; |
| const wchar_t *look = buf - 1; /* 'buf' is at the end of the buffer */ |
| while (1) { |
| Py_ssize_t nchars; |
| const wchar_t *lookEnd = look; |
| /* 'look' will end up one character before the |
| start of the path in question - even if this |
| is one character before the start of the buffer |
| */ |
| while (look >= start_buf && *look != DELIM) |
| look--; |
| nchars = lookEnd-look; |
| wcsncpy(lookBuf, look+1, nchars); |
| lookBuf[nchars] = L'\0'; |
| /* Up one level to the parent */ |
| reduce(lookBuf); |
| if (search_for_prefix(prefix, lookBuf, LANDMARK)) { |
| break; |
| } |
| /* If we are out of paths to search - give up */ |
| if (look < start_buf) { |
| break; |
| } |
| look--; |
| } |
| } |
| |
| config->module_search_path = start_buf; |
| return _Py_INIT_OK(); |
| } |
| |
| |
| static _PyInitError |
| calculate_path_impl(const _PyCoreConfig *core_config, |
| PyCalculatePath *calculate, _PyPathConfig *config) |
| { |
| _PyInitError err; |
| |
| err = get_dll_path(calculate, config); |
| if (_Py_INIT_FAILED(err)) { |
| return err; |
| } |
| |
| err = get_program_full_path(core_config, calculate, config); |
| if (_Py_INIT_FAILED(err)) { |
| return err; |
| } |
| |
| /* program_full_path guaranteed \0 terminated in MAXPATH+1 bytes. */ |
| wcscpy_s(calculate->argv0_path, MAXPATHLEN+1, config->program_full_path); |
| reduce(calculate->argv0_path); |
| |
| wchar_t prefix[MAXPATHLEN+1]; |
| memset(prefix, 0, sizeof(prefix)); |
| |
| /* Search for a sys.path file */ |
| if (calculate_pth_file(config, prefix)) { |
| goto done; |
| } |
| |
| calculate_pyvenv_file(calculate); |
| |
| /* Calculate zip archive path from DLL or exe path */ |
| change_ext(calculate->zip_path, |
| config->dll_path[0] ? config->dll_path : config->program_full_path, |
| L".zip"); |
| |
| calculate_home_prefix(calculate, prefix); |
| |
| err = calculate_module_search_path(core_config, calculate, config, prefix); |
| if (_Py_INIT_FAILED(err)) { |
| return err; |
| } |
| |
| done: |
| config->prefix = _PyMem_RawWcsdup(prefix); |
| if (config->prefix == NULL) { |
| return _Py_INIT_NO_MEMORY(); |
| } |
| |
| return _Py_INIT_OK(); |
| } |
| |
| |
| static void |
| calculate_free(PyCalculatePath *calculate) |
| { |
| PyMem_RawFree(calculate->machine_path); |
| PyMem_RawFree(calculate->user_path); |
| } |
| |
| |
| _PyInitError |
| _PyPathConfig_Calculate(_PyPathConfig *config, const _PyCoreConfig *core_config) |
| { |
| PyCalculatePath calculate; |
| memset(&calculate, 0, sizeof(calculate)); |
| |
| calculate_init(&calculate, core_config); |
| |
| _PyInitError err = calculate_path_impl(core_config, &calculate, config); |
| if (_Py_INIT_FAILED(err)) { |
| goto done; |
| } |
| |
| err = _Py_INIT_OK(); |
| |
| done: |
| calculate_free(&calculate); |
| return err; |
| } |
| |
| |
| /* Load python3.dll before loading any extension module that might refer |
| to it. That way, we can be sure that always the python3.dll corresponding |
| to this python DLL is loaded, not a python3.dll that might be on the path |
| by chance. |
| Return whether the DLL was found. |
| */ |
| static int python3_checked = 0; |
| static HANDLE hPython3; |
| int |
| _Py_CheckPython3(void) |
| { |
| wchar_t py3path[MAXPATHLEN+1]; |
| wchar_t *s; |
| if (python3_checked) { |
| return hPython3 != NULL; |
| } |
| python3_checked = 1; |
| |
| /* If there is a python3.dll next to the python3y.dll, |
| assume this is a build tree; use that DLL */ |
| wcscpy(py3path, _Py_path_config.dll_path); |
| s = wcsrchr(py3path, L'\\'); |
| if (!s) { |
| s = py3path; |
| } |
| wcscpy(s, L"\\python3.dll"); |
| hPython3 = LoadLibraryExW(py3path, NULL, LOAD_WITH_ALTERED_SEARCH_PATH); |
| if (hPython3 != NULL) { |
| return 1; |
| } |
| |
| /* Check sys.prefix\DLLs\python3.dll */ |
| wcscpy(py3path, Py_GetPrefix()); |
| wcscat(py3path, L"\\DLLs\\python3.dll"); |
| hPython3 = LoadLibraryExW(py3path, NULL, LOAD_WITH_ALTERED_SEARCH_PATH); |
| return hPython3 != NULL; |
| } |