| #! /usr/bin/env python |
| |
| # Released to the public domain, by Tim Peters, 03 October 2000. |
| |
| """reindent [-d][-r][-v] [ path ... ] |
| |
| -d (--dryrun) Dry run. Analyze, but don't make any changes to, files. |
| -r (--recurse) Recurse. Search for all .py files in subdirectories too. |
| -v (--verbose) Verbose. Print informative msgs; else no output. |
| -h (--help) Help. Print this usage information and exit. |
| |
| Change Python (.py) files to use 4-space indents and no hard tab characters. |
| Also trim excess spaces and tabs from ends of lines, and remove empty lines |
| at the end of files. Also ensure the last line ends with a newline. |
| |
| If no paths are given on the command line, reindent operates as a filter, |
| reading a single source file from standard input and writing the transformed |
| source to standard output. In this case, the -d, -r and -v flags are |
| ignored. |
| |
| You can pass one or more file and/or directory paths. When a directory |
| path, all .py files within the directory will be examined, and, if the -r |
| option is given, likewise recursively for subdirectories. |
| |
| If output is not to standard output, reindent overwrites files in place, |
| renaming the originals with a .bak extension. If it finds nothing to |
| change, the file is left alone. If reindent does change a file, the changed |
| file is a fixed-point for future runs (i.e., running reindent on the |
| resulting .py file won't change it again). |
| |
| The hard part of reindenting is figuring out what to do with comment |
| lines. So long as the input files get a clean bill of health from |
| tabnanny.py, reindent should do a good job. |
| """ |
| |
| __version__ = "1" |
| |
| import tokenize |
| import os |
| import sys |
| |
| verbose = 0 |
| recurse = 0 |
| dryrun = 0 |
| |
| def usage(msg=None): |
| if msg is not None: |
| print >> sys.stderr, msg |
| print >> sys.stderr, __doc__ |
| |
| def errprint(*args): |
| sep = "" |
| for arg in args: |
| sys.stderr.write(sep + str(arg)) |
| sep = " " |
| sys.stderr.write("\n") |
| |
| def main(): |
| import getopt |
| global verbose, recurse, dryrun |
| try: |
| opts, args = getopt.getopt(sys.argv[1:], "drvh", |
| ["dryrun", "recurse", "verbose", "help"]) |
| except getopt.error as msg: |
| usage(msg) |
| return |
| for o, a in opts: |
| if o in ('-d', '--dryrun'): |
| dryrun += 1 |
| elif o in ('-r', '--recurse'): |
| recurse += 1 |
| elif o in ('-v', '--verbose'): |
| verbose += 1 |
| elif o in ('-h', '--help'): |
| usage() |
| return |
| if not args: |
| r = Reindenter(sys.stdin) |
| r.run() |
| r.write(sys.stdout) |
| return |
| for arg in args: |
| check(arg) |
| |
| def check(file): |
| if os.path.isdir(file) and not os.path.islink(file): |
| if verbose: |
| print "listing directory", file |
| names = os.listdir(file) |
| for name in names: |
| fullname = os.path.join(file, name) |
| if ((recurse and os.path.isdir(fullname) and |
| not os.path.islink(fullname)) |
| or name.lower().endswith(".py")): |
| check(fullname) |
| return |
| |
| if verbose: |
| print "checking", file, "...", |
| try: |
| f = open(file) |
| except IOError as msg: |
| errprint("%s: I/O Error: %s" % (file, str(msg))) |
| return |
| |
| r = Reindenter(f) |
| f.close() |
| if r.run(): |
| if verbose: |
| print "changed." |
| if dryrun: |
| print "But this is a dry run, so leaving it alone." |
| if not dryrun: |
| bak = file + ".bak" |
| if os.path.exists(bak): |
| os.remove(bak) |
| os.rename(file, bak) |
| if verbose: |
| print "renamed", file, "to", bak |
| f = open(file, "w") |
| r.write(f) |
| f.close() |
| if verbose: |
| print "wrote new", file |
| else: |
| if verbose: |
| print "unchanged." |
| |
| def _rstrip(line, JUNK='\n \t'): |
| """Return line stripped of trailing spaces, tabs, newlines. |
| |
| Note that line.rstrip() instead also strips sundry control characters, |
| but at least one known Emacs user expects to keep junk like that, not |
| mentioning Barry by name or anything <wink>. |
| """ |
| |
| i = len(line) |
| while i > 0 and line[i-1] in JUNK: |
| i -= 1 |
| return line[:i] |
| |
| class Reindenter: |
| |
| def __init__(self, f): |
| self.find_stmt = 1 # next token begins a fresh stmt? |
| self.level = 0 # current indent level |
| |
| # Raw file lines. |
| self.raw = f.readlines() |
| |
| # File lines, rstripped & tab-expanded. Dummy at start is so |
| # that we can use tokenize's 1-based line numbering easily. |
| # Note that a line is all-blank iff it's "\n". |
| self.lines = [_rstrip(line).expandtabs() + "\n" |
| for line in self.raw] |
| self.lines.insert(0, None) |
| self.index = 1 # index into self.lines of next line |
| |
| # List of (lineno, indentlevel) pairs, one for each stmt and |
| # comment line. indentlevel is -1 for comment lines, as a |
| # signal that tokenize doesn't know what to do about them; |
| # indeed, they're our headache! |
| self.stats = [] |
| |
| def run(self): |
| tokenize.tokenize(self.getline, self.tokeneater) |
| # Remove trailing empty lines. |
| lines = self.lines |
| while lines and lines[-1] == "\n": |
| lines.pop() |
| # Sentinel. |
| stats = self.stats |
| stats.append((len(lines), 0)) |
| # Map count of leading spaces to # we want. |
| have2want = {} |
| # Program after transformation. |
| after = self.after = [] |
| # Copy over initial empty lines -- there's nothing to do until |
| # we see a line with *something* on it. |
| i = stats[0][0] |
| after.extend(lines[1:i]) |
| for i in range(len(stats)-1): |
| thisstmt, thislevel = stats[i] |
| nextstmt = stats[i+1][0] |
| have = getlspace(lines[thisstmt]) |
| want = thislevel * 4 |
| if want < 0: |
| # A comment line. |
| if have: |
| # An indented comment line. If we saw the same |
| # indentation before, reuse what it most recently |
| # mapped to. |
| want = have2want.get(have, -1) |
| if want < 0: |
| # Then it probably belongs to the next real stmt. |
| for j in xrange(i+1, len(stats)-1): |
| jline, jlevel = stats[j] |
| if jlevel >= 0: |
| if have == getlspace(lines[jline]): |
| want = jlevel * 4 |
| break |
| if want < 0: # Maybe it's a hanging |
| # comment like this one, |
| # in which case we should shift it like its base |
| # line got shifted. |
| for j in xrange(i-1, -1, -1): |
| jline, jlevel = stats[j] |
| if jlevel >= 0: |
| want = have + getlspace(after[jline-1]) - \ |
| getlspace(lines[jline]) |
| break |
| if want < 0: |
| # Still no luck -- leave it alone. |
| want = have |
| else: |
| want = 0 |
| assert want >= 0 |
| have2want[have] = want |
| diff = want - have |
| if diff == 0 or have == 0: |
| after.extend(lines[thisstmt:nextstmt]) |
| else: |
| for line in lines[thisstmt:nextstmt]: |
| if diff > 0: |
| if line == "\n": |
| after.append(line) |
| else: |
| after.append(" " * diff + line) |
| else: |
| remove = min(getlspace(line), -diff) |
| after.append(line[remove:]) |
| return self.raw != self.after |
| |
| def write(self, f): |
| f.writelines(self.after) |
| |
| # Line-getter for tokenize. |
| def getline(self): |
| if self.index >= len(self.lines): |
| line = "" |
| else: |
| line = self.lines[self.index] |
| self.index += 1 |
| return line |
| |
| # Line-eater for tokenize. |
| def tokeneater(self, type, token, (sline, scol), end, line, |
| INDENT=tokenize.INDENT, |
| DEDENT=tokenize.DEDENT, |
| NEWLINE=tokenize.NEWLINE, |
| COMMENT=tokenize.COMMENT, |
| NL=tokenize.NL): |
| |
| if type == NEWLINE: |
| # A program statement, or ENDMARKER, will eventually follow, |
| # after some (possibly empty) run of tokens of the form |
| # (NL | COMMENT)* (INDENT | DEDENT+)? |
| self.find_stmt = 1 |
| |
| elif type == INDENT: |
| self.find_stmt = 1 |
| self.level += 1 |
| |
| elif type == DEDENT: |
| self.find_stmt = 1 |
| self.level -= 1 |
| |
| elif type == COMMENT: |
| if self.find_stmt: |
| self.stats.append((sline, -1)) |
| # but we're still looking for a new stmt, so leave |
| # find_stmt alone |
| |
| elif type == NL: |
| pass |
| |
| elif self.find_stmt: |
| # This is the first "real token" following a NEWLINE, so it |
| # must be the first token of the next program statement, or an |
| # ENDMARKER. |
| self.find_stmt = 0 |
| if line: # not endmarker |
| self.stats.append((sline, self.level)) |
| |
| # Count number of leading blanks. |
| def getlspace(line): |
| i, n = 0, len(line) |
| while i < n and line[i] == " ": |
| i += 1 |
| return i |
| |
| if __name__ == '__main__': |
| main() |