| # Defines classes that provide synchronization objects. Note that use of |
| # this module requires that your Python support threads. |
| # |
| # condition(lock=None) # a POSIX-like condition-variable object |
| # barrier(n) # an n-thread barrier |
| # event() # an event object |
| # semaphore(n=1) # a semaphore object, with initial count n |
| # mrsw() # a multiple-reader single-writer lock |
| # |
| # CONDITIONS |
| # |
| # A condition object is created via |
| # import this_module |
| # your_condition_object = this_module.condition(lock=None) |
| # |
| # As explained below, a condition object has a lock associated with it, |
| # used in the protocol to protect condition data. You can specify a |
| # lock to use in the constructor, else the constructor will allocate |
| # an anonymous lock for you. Specifying a lock explicitly can be useful |
| # when more than one condition keys off the same set of shared data. |
| # |
| # Methods: |
| # .acquire() |
| # acquire the lock associated with the condition |
| # .release() |
| # release the lock associated with the condition |
| # .wait() |
| # block the thread until such time as some other thread does a |
| # .signal or .broadcast on the same condition, and release the |
| # lock associated with the condition. The lock associated with |
| # the condition MUST be in the acquired state at the time |
| # .wait is invoked. |
| # .signal() |
| # wake up exactly one thread (if any) that previously did a .wait |
| # on the condition; that thread will awaken with the lock associated |
| # with the condition in the acquired state. If no threads are |
| # .wait'ing, this is a nop. If more than one thread is .wait'ing on |
| # the condition, any of them may be awakened. |
| # .broadcast() |
| # wake up all threads (if any) that are .wait'ing on the condition; |
| # the threads are woken up serially, each with the lock in the |
| # acquired state, so should .release() as soon as possible. If no |
| # threads are .wait'ing, this is a nop. |
| # |
| # Note that if a thread does a .wait *while* a signal/broadcast is |
| # in progress, it's guaranteeed to block until a subsequent |
| # signal/broadcast. |
| # |
| # Secret feature: `broadcast' actually takes an integer argument, |
| # and will wake up exactly that many waiting threads (or the total |
| # number waiting, if that's less). Use of this is dubious, though, |
| # and probably won't be supported if this form of condition is |
| # reimplemented in C. |
| # |
| # DIFFERENCES FROM POSIX |
| # |
| # + A separate mutex is not needed to guard condition data. Instead, a |
| # condition object can (must) be .acquire'ed and .release'ed directly. |
| # This eliminates a common error in using POSIX conditions. |
| # |
| # + Because of implementation difficulties, a POSIX `signal' wakes up |
| # _at least_ one .wait'ing thread. Race conditions make it difficult |
| # to stop that. This implementation guarantees to wake up only one, |
| # but you probably shouldn't rely on that. |
| # |
| # PROTOCOL |
| # |
| # Condition objects are used to block threads until "some condition" is |
| # true. E.g., a thread may wish to wait until a producer pumps out data |
| # for it to consume, or a server may wish to wait until someone requests |
| # its services, or perhaps a whole bunch of threads want to wait until a |
| # preceding pass over the data is complete. Early models for conditions |
| # relied on some other thread figuring out when a blocked thread's |
| # condition was true, and made the other thread responsible both for |
| # waking up the blocked thread and guaranteeing that it woke up with all |
| # data in a correct state. This proved to be very delicate in practice, |
| # and gave conditions a bad name in some circles. |
| # |
| # The POSIX model addresses these problems by making a thread responsible |
| # for ensuring that its own state is correct when it wakes, and relies |
| # on a rigid protocol to make this easy; so long as you stick to the |
| # protocol, POSIX conditions are easy to "get right": |
| # |
| # A) The thread that's waiting for some arbitrarily-complex condition |
| # (ACC) to become true does: |
| # |
| # condition.acquire() |
| # while not (code to evaluate the ACC): |
| # condition.wait() |
| # # That blocks the thread, *and* releases the lock. When a |
| # # condition.signal() happens, it will wake up some thread that |
| # # did a .wait, *and* acquire the lock again before .wait |
| # # returns. |
| # # |
| # # Because the lock is acquired at this point, the state used |
| # # in evaluating the ACC is frozen, so it's safe to go back & |
| # # reevaluate the ACC. |
| # |
| # # At this point, ACC is true, and the thread has the condition |
| # # locked. |
| # # So code here can safely muck with the shared state that |
| # # went into evaluating the ACC -- if it wants to. |
| # # When done mucking with the shared state, do |
| # condition.release() |
| # |
| # B) Threads that are mucking with shared state that may affect the |
| # ACC do: |
| # |
| # condition.acquire() |
| # # muck with shared state |
| # condition.release() |
| # if it's possible that ACC is true now: |
| # condition.signal() # or .broadcast() |
| # |
| # Note: You may prefer to put the "if" clause before the release(). |
| # That's fine, but do note that anyone waiting on the signal will |
| # stay blocked until the release() is done (since acquiring the |
| # condition is part of what .wait() does before it returns). |
| # |
| # TRICK OF THE TRADE |
| # |
| # With simpler forms of conditions, it can be impossible to know when |
| # a thread that's supposed to do a .wait has actually done it. But |
| # because this form of condition releases a lock as _part_ of doing a |
| # wait, the state of that lock can be used to guarantee it. |
| # |
| # E.g., suppose thread A spawns thread B and later wants to wait for B to |
| # complete: |
| # |
| # In A: In B: |
| # |
| # B_done = condition() ... do work ... |
| # B_done.acquire() B_done.acquire(); B_done.release() |
| # spawn B B_done.signal() |
| # ... some time later ... ... and B exits ... |
| # B_done.wait() |
| # |
| # Because B_done was in the acquire'd state at the time B was spawned, |
| # B's attempt to acquire B_done can't succeed until A has done its |
| # B_done.wait() (which releases B_done). So B's B_done.signal() is |
| # guaranteed to be seen by the .wait(). Without the lock trick, B |
| # may signal before A .waits, and then A would wait forever. |
| # |
| # BARRIERS |
| # |
| # A barrier object is created via |
| # import this_module |
| # your_barrier = this_module.barrier(num_threads) |
| # |
| # Methods: |
| # .enter() |
| # the thread blocks until num_threads threads in all have done |
| # .enter(). Then the num_threads threads that .enter'ed resume, |
| # and the barrier resets to capture the next num_threads threads |
| # that .enter it. |
| # |
| # EVENTS |
| # |
| # An event object is created via |
| # import this_module |
| # your_event = this_module.event() |
| # |
| # An event has two states, `posted' and `cleared'. An event is |
| # created in the cleared state. |
| # |
| # Methods: |
| # |
| # .post() |
| # Put the event in the posted state, and resume all threads |
| # .wait'ing on the event (if any). |
| # |
| # .clear() |
| # Put the event in the cleared state. |
| # |
| # .is_posted() |
| # Returns 0 if the event is in the cleared state, or 1 if the event |
| # is in the posted state. |
| # |
| # .wait() |
| # If the event is in the posted state, returns immediately. |
| # If the event is in the cleared state, blocks the calling thread |
| # until the event is .post'ed by another thread. |
| # |
| # Note that an event, once posted, remains posted until explicitly |
| # cleared. Relative to conditions, this is both the strength & weakness |
| # of events. It's a strength because the .post'ing thread doesn't have to |
| # worry about whether the threads it's trying to communicate with have |
| # already done a .wait (a condition .signal is seen only by threads that |
| # do a .wait _prior_ to the .signal; a .signal does not persist). But |
| # it's a weakness because .clear'ing an event is error-prone: it's easy |
| # to mistakenly .clear an event before all the threads you intended to |
| # see the event get around to .wait'ing on it. But so long as you don't |
| # need to .clear an event, events are easy to use safely. |
| # |
| # SEMAPHORES |
| # |
| # A semaphore object is created via |
| # import this_module |
| # your_semaphore = this_module.semaphore(count=1) |
| # |
| # A semaphore has an integer count associated with it. The initial value |
| # of the count is specified by the optional argument (which defaults to |
| # 1) passed to the semaphore constructor. |
| # |
| # Methods: |
| # |
| # .p() |
| # If the semaphore's count is greater than 0, decrements the count |
| # by 1 and returns. |
| # Else if the semaphore's count is 0, blocks the calling thread |
| # until a subsequent .v() increases the count. When that happens, |
| # the count will be decremented by 1 and the calling thread resumed. |
| # |
| # .v() |
| # Increments the semaphore's count by 1, and wakes up a thread (if |
| # any) blocked by a .p(). It's an (detected) error for a .v() to |
| # increase the semaphore's count to a value larger than the initial |
| # count. |
| # |
| # MULTIPLE-READER SINGLE-WRITER LOCKS |
| # |
| # A mrsw lock is created via |
| # import this_module |
| # your_mrsw_lock = this_module.mrsw() |
| # |
| # This kind of lock is often useful with complex shared data structures. |
| # The object lets any number of "readers" proceed, so long as no thread |
| # wishes to "write". When a (one or more) thread declares its intention |
| # to "write" (e.g., to update a shared structure), all current readers |
| # are allowed to finish, and then a writer gets exclusive access; all |
| # other readers & writers are blocked until the current writer completes. |
| # Finally, if some thread is waiting to write and another is waiting to |
| # read, the writer takes precedence. |
| # |
| # Methods: |
| # |
| # .read_in() |
| # If no thread is writing or waiting to write, returns immediately. |
| # Else blocks until no thread is writing or waiting to write. So |
| # long as some thread has completed a .read_in but not a .read_out, |
| # writers are blocked. |
| # |
| # .read_out() |
| # Use sometime after a .read_in to declare that the thread is done |
| # reading. When all threads complete reading, a writer can proceed. |
| # |
| # .write_in() |
| # If no thread is writing (has completed a .write_in, but hasn't yet |
| # done a .write_out) or reading (similarly), returns immediately. |
| # Else blocks the calling thread, and threads waiting to read, until |
| # the current writer completes writing or all the current readers |
| # complete reading; if then more than one thread is waiting to |
| # write, one of them is allowed to proceed, but which one is not |
| # specified. |
| # |
| # .write_out() |
| # Use sometime after a .write_in to declare that the thread is done |
| # writing. Then if some other thread is waiting to write, it's |
| # allowed to proceed. Else all threads (if any) waiting to read are |
| # allowed to proceed. |
| # |
| # .write_to_read() |
| # Use instead of a .write_in to declare that the thread is done |
| # writing but wants to continue reading without other writers |
| # intervening. If there are other threads waiting to write, they |
| # are allowed to proceed only if the current thread calls |
| # .read_out; threads waiting to read are only allowed to proceed |
| # if there are are no threads waiting to write. (This is a |
| # weakness of the interface!) |
| |
| import thread |
| |
| class condition: |
| def __init__(self, lock=None): |
| # the lock actually used by .acquire() and .release() |
| if lock is None: |
| self.mutex = thread.allocate_lock() |
| else: |
| if hasattr(lock, 'acquire') and \ |
| hasattr(lock, 'release'): |
| self.mutex = lock |
| else: |
| raise TypeError, 'condition constructor requires ' \ |
| 'a lock argument' |
| |
| # lock used to block threads until a signal |
| self.checkout = thread.allocate_lock() |
| self.checkout.acquire() |
| |
| # internal critical-section lock, & the data it protects |
| self.idlock = thread.allocate_lock() |
| self.id = 0 |
| self.waiting = 0 # num waiters subject to current release |
| self.pending = 0 # num waiters awaiting next signal |
| self.torelease = 0 # num waiters to release |
| self.releasing = 0 # 1 iff release is in progress |
| |
| def acquire(self): |
| self.mutex.acquire() |
| |
| def release(self): |
| self.mutex.release() |
| |
| def wait(self): |
| mutex, checkout, idlock = self.mutex, self.checkout, self.idlock |
| if not mutex.locked(): |
| raise ValueError, \ |
| "condition must be .acquire'd when .wait() invoked" |
| |
| idlock.acquire() |
| myid = self.id |
| self.pending = self.pending + 1 |
| idlock.release() |
| |
| mutex.release() |
| |
| while 1: |
| checkout.acquire(); idlock.acquire() |
| if myid < self.id: |
| break |
| checkout.release(); idlock.release() |
| |
| self.waiting = self.waiting - 1 |
| self.torelease = self.torelease - 1 |
| if self.torelease: |
| checkout.release() |
| else: |
| self.releasing = 0 |
| if self.waiting == self.pending == 0: |
| self.id = 0 |
| idlock.release() |
| mutex.acquire() |
| |
| def signal(self): |
| self.broadcast(1) |
| |
| def broadcast(self, num = -1): |
| if num < -1: |
| raise ValueError, '.broadcast called with num %r' % (num,) |
| if num == 0: |
| return |
| self.idlock.acquire() |
| if self.pending: |
| self.waiting = self.waiting + self.pending |
| self.pending = 0 |
| self.id = self.id + 1 |
| if num == -1: |
| self.torelease = self.waiting |
| else: |
| self.torelease = min( self.waiting, |
| self.torelease + num ) |
| if self.torelease and not self.releasing: |
| self.releasing = 1 |
| self.checkout.release() |
| self.idlock.release() |
| |
| class barrier: |
| def __init__(self, n): |
| self.n = n |
| self.togo = n |
| self.full = condition() |
| |
| def enter(self): |
| full = self.full |
| full.acquire() |
| self.togo = self.togo - 1 |
| if self.togo: |
| full.wait() |
| else: |
| self.togo = self.n |
| full.broadcast() |
| full.release() |
| |
| class event: |
| def __init__(self): |
| self.state = 0 |
| self.posted = condition() |
| |
| def post(self): |
| self.posted.acquire() |
| self.state = 1 |
| self.posted.broadcast() |
| self.posted.release() |
| |
| def clear(self): |
| self.posted.acquire() |
| self.state = 0 |
| self.posted.release() |
| |
| def is_posted(self): |
| self.posted.acquire() |
| answer = self.state |
| self.posted.release() |
| return answer |
| |
| def wait(self): |
| self.posted.acquire() |
| if not self.state: |
| self.posted.wait() |
| self.posted.release() |
| |
| class semaphore: |
| def __init__(self, count=1): |
| if count <= 0: |
| raise ValueError, 'semaphore count %d; must be >= 1' % count |
| self.count = count |
| self.maxcount = count |
| self.nonzero = condition() |
| |
| def p(self): |
| self.nonzero.acquire() |
| while self.count == 0: |
| self.nonzero.wait() |
| self.count = self.count - 1 |
| self.nonzero.release() |
| |
| def v(self): |
| self.nonzero.acquire() |
| if self.count == self.maxcount: |
| raise ValueError, '.v() tried to raise semaphore count above ' \ |
| 'initial value %r' % (maxcount,)) |
| self.count = self.count + 1 |
| self.nonzero.signal() |
| self.nonzero.release() |
| |
| class mrsw: |
| def __init__(self): |
| # critical-section lock & the data it protects |
| self.rwOK = thread.allocate_lock() |
| self.nr = 0 # number readers actively reading (not just waiting) |
| self.nw = 0 # number writers either waiting to write or writing |
| self.writing = 0 # 1 iff some thread is writing |
| |
| # conditions |
| self.readOK = condition(self.rwOK) # OK to unblock readers |
| self.writeOK = condition(self.rwOK) # OK to unblock writers |
| |
| def read_in(self): |
| self.rwOK.acquire() |
| while self.nw: |
| self.readOK.wait() |
| self.nr = self.nr + 1 |
| self.rwOK.release() |
| |
| def read_out(self): |
| self.rwOK.acquire() |
| if self.nr <= 0: |
| raise ValueError, \ |
| '.read_out() invoked without an active reader' |
| self.nr = self.nr - 1 |
| if self.nr == 0: |
| self.writeOK.signal() |
| self.rwOK.release() |
| |
| def write_in(self): |
| self.rwOK.acquire() |
| self.nw = self.nw + 1 |
| while self.writing or self.nr: |
| self.writeOK.wait() |
| self.writing = 1 |
| self.rwOK.release() |
| |
| def write_out(self): |
| self.rwOK.acquire() |
| if not self.writing: |
| raise ValueError, \ |
| '.write_out() invoked without an active writer' |
| self.writing = 0 |
| self.nw = self.nw - 1 |
| if self.nw: |
| self.writeOK.signal() |
| else: |
| self.readOK.broadcast() |
| self.rwOK.release() |
| |
| def write_to_read(self): |
| self.rwOK.acquire() |
| if not self.writing: |
| raise ValueError, \ |
| '.write_to_read() invoked without an active writer' |
| self.writing = 0 |
| self.nw = self.nw - 1 |
| self.nr = self.nr + 1 |
| if not self.nw: |
| self.readOK.broadcast() |
| self.rwOK.release() |
| |
| # The rest of the file is a test case, that runs a number of parallelized |
| # quicksorts in parallel. If it works, you'll get about 600 lines of |
| # tracing output, with a line like |
| # test passed! 209 threads created in all |
| # as the last line. The content and order of preceding lines will |
| # vary across runs. |
| |
| def _new_thread(func, *args): |
| global TID |
| tid.acquire(); id = TID = TID+1; tid.release() |
| io.acquire(); alive.append(id); \ |
| print 'starting thread', id, '--', len(alive), 'alive'; \ |
| io.release() |
| thread.start_new_thread( func, (id,) + args ) |
| |
| def _qsort(tid, a, l, r, finished): |
| # sort a[l:r]; post finished when done |
| io.acquire(); print 'thread', tid, 'qsort', l, r; io.release() |
| if r-l > 1: |
| pivot = a[l] |
| j = l+1 # make a[l:j] <= pivot, and a[j:r] > pivot |
| for i in range(j, r): |
| if a[i] <= pivot: |
| a[j], a[i] = a[i], a[j] |
| j = j + 1 |
| a[l], a[j-1] = a[j-1], pivot |
| |
| l_subarray_sorted = event() |
| r_subarray_sorted = event() |
| _new_thread(_qsort, a, l, j-1, l_subarray_sorted) |
| _new_thread(_qsort, a, j, r, r_subarray_sorted) |
| l_subarray_sorted.wait() |
| r_subarray_sorted.wait() |
| |
| io.acquire(); print 'thread', tid, 'qsort done'; \ |
| alive.remove(tid); io.release() |
| finished.post() |
| |
| def _randarray(tid, a, finished): |
| io.acquire(); print 'thread', tid, 'randomizing array'; \ |
| io.release() |
| for i in range(1, len(a)): |
| wh.acquire(); j = randint(0,i); wh.release() |
| a[i], a[j] = a[j], a[i] |
| io.acquire(); print 'thread', tid, 'randomizing done'; \ |
| alive.remove(tid); io.release() |
| finished.post() |
| |
| def _check_sort(a): |
| if a != range(len(a)): |
| raise ValueError, ('a not sorted', a) |
| |
| def _run_one_sort(tid, a, bar, done): |
| # randomize a, and quicksort it |
| # for variety, all the threads running this enter a barrier |
| # at the end, and post `done' after the barrier exits |
| io.acquire(); print 'thread', tid, 'randomizing', a; \ |
| io.release() |
| finished = event() |
| _new_thread(_randarray, a, finished) |
| finished.wait() |
| |
| io.acquire(); print 'thread', tid, 'sorting', a; io.release() |
| finished.clear() |
| _new_thread(_qsort, a, 0, len(a), finished) |
| finished.wait() |
| _check_sort(a) |
| |
| io.acquire(); print 'thread', tid, 'entering barrier'; \ |
| io.release() |
| bar.enter() |
| io.acquire(); print 'thread', tid, 'leaving barrier'; \ |
| io.release() |
| io.acquire(); alive.remove(tid); io.release() |
| bar.enter() # make sure they've all removed themselves from alive |
| ## before 'done' is posted |
| bar.enter() # just to be cruel |
| done.post() |
| |
| def test(): |
| global TID, tid, io, wh, randint, alive |
| import random |
| randint = random.randint |
| |
| TID = 0 # thread ID (1, 2, ...) |
| tid = thread.allocate_lock() # for changing TID |
| io = thread.allocate_lock() # for printing, and 'alive' |
| wh = thread.allocate_lock() # for calls to random |
| alive = [] # IDs of active threads |
| |
| NSORTS = 5 |
| arrays = [] |
| for i in range(NSORTS): |
| arrays.append( range( (i+1)*10 ) ) |
| |
| bar = barrier(NSORTS) |
| finished = event() |
| for i in range(NSORTS): |
| _new_thread(_run_one_sort, arrays[i], bar, finished) |
| finished.wait() |
| |
| print 'all threads done, and checking results ...' |
| if alive: |
| raise ValueError, ('threads still alive at end', alive) |
| for i in range(NSORTS): |
| a = arrays[i] |
| if len(a) != (i+1)*10: |
| raise ValueError, ('length of array', i, 'screwed up') |
| _check_sort(a) |
| |
| print 'test passed!', TID, 'threads created in all' |
| |
| if __name__ == '__main__': |
| test() |
| |
| # end of module |