blob: e62d5ed28bc994bfd64a4531ccc28522badeb332 [file] [log] [blame]
# META-NOTE: this note is different from the note in the other Makefiles!
# NOTE: Makefile.pre.in is converted into Makefile.pre by the configure
# script in the toplevel directory or by ../config.status.
# Makefile.pre is converted into Makefile by running the makesetup
# script in the source directory. Once Makefile exists, it can be
# brought up to date by running "make Makefile". (The makesetup also
# creates config.c from config.c.in in the source directory.)
# === Variables set by makesetup ===
MODOBJS= _MODOBJS_
MODLIBS= _MODLIBS_
# === Variables set by configure ===
VERSION= @VERSION@
srcdir= @srcdir@
VPATH= @srcdir@
CC= @CC@
RANLIB= @RANLIB@
AR= @AR@
OPT= @OPT@
LDFLAGS= @LDFLAGS@
LDLAST= @LDLAST@
DEFS= @DEFS@
LIBS= @LIBS@
LIBM= @LIBM@
LIBC= @LIBC@
# Machine-dependent subdirectories
MACHDEP= @MACHDEP@
# Install prefix for architecture-independent files
prefix= @prefix@
# Install prefix for architecture-dependent files
exec_prefix= @exec_prefix@
# Expanded directories
BINDIR= $(exec_prefix)/bin
LIBDIR= $(exec_prefix)/lib
MANDIR= $(prefix)/man
INCLUDEDIR= $(prefix)/include
SCRIPTDIR= $(prefix)/lib
# Detailed destination directories
BINLIBDEST= $(LIBDIR)/python$(VERSION)
LIBDEST= $(SCRIPTDIR)/python$(VERSION)
INCLUDEPY= $(INCLUDEDIR)/python$(VERSION)
LIBP= $(LIBDIR)/python$(VERSION)
# Symbols used for using shared libraries
SO= @SO@
LDSHARED= @LDSHARED@
CCSHARED= @CCSHARED@
LINKFORSHARED= @LINKFORSHARED@
DESTSHARED= $(BINLIBDEST)/sharedmodules
# Portable install script (configure doesn't always guess right)
INSTALL= @srcdir@/../install-sh -c
INSTALL_PROGRAM=${INSTALL} -m 755
INSTALL_DATA= ${INSTALL} -m 644
# Shared libraries must be installed with executable mode on some systems;
# rather than figuring out exactly which, we always give them executable mode.
# Also, making them read-only seems to be a good idea...
INSTALL_SHARED= ${INSTALL} -m 555
# === Variables that are customizable by hand or by inclusion in Setup ===
LINKCC= @LINKCC@
INCLDIR= $(srcdir)/../Include
CONFIGINCLDIR= ..
CFLAGS= $(OPT) -I$(INCLDIR) -I$(CONFIGINCLDIR) $(DEFS)
MKDEP= mkdep
SHELL= /bin/sh
MAKESETUP= $(srcdir)/makesetup
# (The makesetup script inserts all variable definitions found
# found in the Setup file just below the following line.
# This means that the Setup file can override any of the definitions
# given before this point, but not any given below.
# The script insert the definitions in reverse order,
# for the benefits of independent extensions.)
# === Definitions added by makesetup ===
# === Fixed definitions ===
FIXOBJS= config.o getpath.o main.o getbuildinfo.o
OBJS= $(MODOBJS) $(FIXOBJS)
MAINOBJ= python.o
SYSLIBS= $(LIBM) $(LIBC)
LIBRARY= ../libpython$(VERSION).a
# === Rules ===
all: $(OBJS)
# Targets for Jim Fulton's extension Makefiles -- are these still needed?
asharedmodule: $(ASHAREDMODULE)$(SO)
$(ASHAREDMODULE)$(SO): $(ASHAREDMODULESOBS)
$(LDSHARED) $(LDFLAGS) -o $(ASHAREDMODULE)$(SO) $(ASHAREDMODULESOBS) \
$(ASHAREDMODULESEXTRA)
# This target is used by the master Makefile to add the objects to the library.
# To deal with the conflict between signalmodule.o and
# sigcheck.o+intrcheck.o, we remove the latter two if we have the former.
add2lib: $(OBJS)
-for i in $(OBJS); do \
if test "$$i" = "signalmodule.o"; then \
ar d $(LIBRARY) sigcheck.o intrcheck.o 2>/dev/null; \
break; \
fi; \
done
$(AR) cr $(LIBRARY) $(OBJS)
touch add2lib
# Use ``EXE=.exe'' for Unix emulations on DOS/Windows
EXE=
# This target is used by the master Makefile to link the final binary.
link: $(MAINOBJ)
$(LINKCC) $(LDFLAGS) $(OPT) $(LINKFORSHARED) $(MAINOBJ) \
$(LIBRARY) $(MODLIBS) $(LIBS) $(SYSLIBS) -o python $(LDLAST)
mv python$(EXE) ../python$(EXE)
clean:
-rm -f *.o python core *~ [@,#]* *.old *.orig *.rej add2lib
clobber: clean
-rm -f *.a tags TAGS config.c glmodule.c Makefile.pre
-rm -f *.so *.sl so_locations
getpath.o: getpath.c Makefile
$(CC) -c $(CFLAGS) -DPYTHONPATH='"$(PYTHONPATH)"' \
-DPREFIX='"$(prefix)"' \
-DEXEC_PREFIX='"$(exec_prefix)"' \
-DVERSION='"$(VERSION)"' \
-DVPATH='"$(VPATH)"' \
$(srcdir)/getpath.c
# When the configuration changes, we remove the library, so that it
# gets remade from scratch; this ensures to remove modules that are no
# longer pertinent (but that were in a previous configuration).
config.c Makefile: Makefile.pre config.c.in $(MAKESETUP) Setup Setup.local
-rm -f $(LIBRARY)
$(SHELL) $(MAKESETUP) Setup.local Setup
Setup:
cp $(srcdir)/Setup.in Setup
Setup.local:
echo "# Edit this file for local setup changes" >Setup.local
Makefile.pre: Makefile.pre.in ../config.status
(cd ..; CONFIG_FILES=Modules/Makefile.pre CONFIG_HEADERS= \
$(SHELL) config.status)
depend:
$(MKDEP) $(CFLAGS) `echo $(OBJS) | tr ' ' '\012' | \
sed 's|\(.*\)\.o|$(srcdir)/\1.c|'`
.PRECIOUS: ../python
glmodule.c: $(srcdir)/cgen.py $(srcdir)/cstubs
python $(srcdir)/cgen.py <$(srcdir)/cstubs >glmodule.c
almodule.o: almodule.c
arraymodule.o: arraymodule.c
audioop.o: audioop.c
cdmodule.o: cdmodule.c
cgensupport.o: cgensupport.c
clmodule.o: clmodule.c
dbmmodule.o: dbmmodule.c
errnomodule.o: errnomodule.c
fcntlmodule.o: fcntlmodule.c
flmodule.o: flmodule.c
fmmodule.o: fmmodule.c
glmodule.o: glmodule.c
imageop.o: imageop.c
imgfile.o: imgfile.c
main.o: main.c
mathmodule.o: mathmodule.c
md5c.o: md5c.c
md5module.o: md5module.c
mpzmodule.o: mpzmodule.c
nismodule.o: nismodule.c
operator.o: operator.c
parsermodule.o: parsermodule.c
posixmodule.o: posixmodule.c
pwdmodule.o: pwdmodule.c
regexmodule.o: regexmodule.c
regexpr.o: regexpr.c
resource.o: resource.c
rgbimgmodule.o: rgbimgmodule.c
rotormodule.o: rotormodule.c
selectmodule.o: selectmodule.c
sgimodule.o: sgimodule.c
socketmodule.o: socketmodule.c
stdwinmodule.o: stdwinmodule.c
stropmodule.o: stropmodule.c
structmodule.o: structmodule.c
sunaudiodev.o: sunaudiodev.c
svmodule.o: svmodule.c
threadmodule.o: threadmodule.c
timemodule.o: timemodule.c
timingmodule.o: timingmodule.c
xxmodule.o: xxmodule.c
yuvconvert.o: yuvconvert.c
# Rules to build and install all shared modules
sharedmods: $(SHAREDMODS)
sharedinstall: $(DESTSHARED) $(SHAREDMODS)
-for i in X $(SHAREDMODS); do \
if test $$i != X; \
then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
fi; \
done
# Install a shared module from outside of setup
asharedinstall: $(DESTSHARED) $(ASHAREDMODULE)$(SO)
-for i in dummy $(ASHAREDMODULE)$(SO); do \
if test -f $$i; then mv $$i $(DESTSHARED)/$$i; fi; done
# This is handy when modules need to know where the destination directory is:
echodestshared: $(DESTSHARED)
echo $(DESTSHARED)
DESTDIRS= $(exec_prefix) $(LIBDIR) $(BINLIBDEST) $(DESTSHARED)
$(DESTSHARED):
@for i in $(DESTDIRS); \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod 755 $$i; \
else true; \
fi; \
done
# Stuff is appended here by makesetup and make depend