| /* Long (arbitrary precision) integer object implementation */ |
| |
| /* XXX The functional organization of this file is terrible */ |
| |
| #include "Python.h" |
| #include "longintrepr.h" |
| |
| #include "formatter_unicode.h" |
| |
| #include <ctype.h> |
| |
| #ifndef NSMALLPOSINTS |
| #define NSMALLPOSINTS 257 |
| #endif |
| #ifndef NSMALLNEGINTS |
| #define NSMALLNEGINTS 5 |
| #endif |
| #if NSMALLNEGINTS + NSMALLPOSINTS > 0 |
| /* Small integers are preallocated in this array so that they |
| can be shared. |
| The integers that are preallocated are those in the range |
| -NSMALLNEGINTS (inclusive) to NSMALLPOSINTS (not inclusive). |
| */ |
| static PyLongObject small_ints[NSMALLNEGINTS + NSMALLPOSINTS]; |
| #ifdef COUNT_ALLOCS |
| int quick_int_allocs, quick_neg_int_allocs; |
| #endif |
| |
| static PyObject * |
| get_small_int(int ival) |
| { |
| PyObject *v = (PyObject*)(small_ints + ival + NSMALLNEGINTS); |
| Py_INCREF(v); |
| #ifdef COUNT_ALLOCS |
| if (ival >= 0) |
| quick_int_allocs++; |
| else |
| quick_neg_int_allocs++; |
| #endif |
| return v; |
| } |
| #define CHECK_SMALL_INT(ival) \ |
| do if (-NSMALLNEGINTS <= ival && ival < NSMALLPOSINTS) { \ |
| return get_small_int(ival); \ |
| } while(0) |
| |
| #else |
| #define CHECK_SMALL_INT(ival) |
| #endif |
| |
| #define MEDIUM_VALUE(x) (Py_SIZE(x) < 0 ? -(x)->ob_digit[0] : (Py_SIZE(x) == 0 ? 0 : (x)->ob_digit[0])) |
| /* If a freshly-allocated long is already shared, it must |
| be a small integer, so negating it must go to PyLong_FromLong */ |
| #define NEGATE(x) \ |
| do if (Py_REFCNT(x) == 1) Py_SIZE(x) = -Py_SIZE(x); \ |
| else { PyObject* tmp=PyLong_FromLong(-MEDIUM_VALUE(x)); \ |
| Py_DECREF(x); (x) = (PyLongObject*)tmp; } \ |
| while(0) |
| /* For long multiplication, use the O(N**2) school algorithm unless |
| * both operands contain more than KARATSUBA_CUTOFF digits (this |
| * being an internal Python long digit, in base BASE). |
| */ |
| #define KARATSUBA_CUTOFF 70 |
| #define KARATSUBA_SQUARE_CUTOFF (2 * KARATSUBA_CUTOFF) |
| |
| /* For exponentiation, use the binary left-to-right algorithm |
| * unless the exponent contains more than FIVEARY_CUTOFF digits. |
| * In that case, do 5 bits at a time. The potential drawback is that |
| * a table of 2**5 intermediate results is computed. |
| */ |
| #define FIVEARY_CUTOFF 8 |
| |
| #define ABS(x) ((x) < 0 ? -(x) : (x)) |
| |
| #undef MIN |
| #undef MAX |
| #define MAX(x, y) ((x) < (y) ? (y) : (x)) |
| #define MIN(x, y) ((x) > (y) ? (y) : (x)) |
| |
| /* Forward */ |
| static PyLongObject *long_normalize(PyLongObject *); |
| static PyLongObject *mul1(PyLongObject *, wdigit); |
| static PyLongObject *muladd1(PyLongObject *, wdigit, wdigit); |
| static PyLongObject *divrem1(PyLongObject *, digit, digit *); |
| |
| #define SIGCHECK(PyTryBlock) \ |
| if (--_Py_Ticker < 0) { \ |
| _Py_Ticker = _Py_CheckInterval; \ |
| if (PyErr_CheckSignals()) PyTryBlock \ |
| } |
| |
| /* Normalize (remove leading zeros from) a long int object. |
| Doesn't attempt to free the storage--in most cases, due to the nature |
| of the algorithms used, this could save at most be one word anyway. */ |
| |
| static PyLongObject * |
| long_normalize(register PyLongObject *v) |
| { |
| Py_ssize_t j = ABS(Py_SIZE(v)); |
| Py_ssize_t i = j; |
| |
| while (i > 0 && v->ob_digit[i-1] == 0) |
| --i; |
| if (i != j) |
| Py_SIZE(v) = (Py_SIZE(v) < 0) ? -(i) : i; |
| return v; |
| } |
| |
| /* Allocate a new long int object with size digits. |
| Return NULL and set exception if we run out of memory. */ |
| |
| PyLongObject * |
| _PyLong_New(Py_ssize_t size) |
| { |
| PyLongObject *result; |
| /* Can't use sizeof(PyLongObject) here, since the |
| compiler takes padding at the end into account. |
| As the consequence, this would waste 2 bytes on |
| a 32-bit system, and 6 bytes on a 64-bit system. |
| This computation would be incorrect on systems |
| which have padding before the digits; with 16-bit |
| digits this should not happen. */ |
| result = PyObject_MALLOC(sizeof(PyVarObject) + |
| size*sizeof(digit)); |
| if (!result) { |
| PyErr_NoMemory(); |
| return NULL; |
| } |
| return (PyLongObject*)PyObject_INIT_VAR(result, &PyLong_Type, size); |
| } |
| |
| PyObject * |
| _PyLong_Copy(PyLongObject *src) |
| { |
| PyLongObject *result; |
| Py_ssize_t i; |
| |
| assert(src != NULL); |
| i = Py_SIZE(src); |
| if (i < 0) |
| i = -(i); |
| if (i < 2) { |
| int ival = src->ob_digit[0]; |
| if (Py_SIZE(src) < 0) |
| ival = -ival; |
| CHECK_SMALL_INT(ival); |
| } |
| result = _PyLong_New(i); |
| if (result != NULL) { |
| Py_SIZE(result) = Py_SIZE(src); |
| while (--i >= 0) |
| result->ob_digit[i] = src->ob_digit[i]; |
| } |
| return (PyObject *)result; |
| } |
| |
| /* Create a new long int object from a C long int */ |
| |
| PyObject * |
| PyLong_FromLong(long ival) |
| { |
| PyLongObject *v; |
| unsigned long t; /* unsigned so >> doesn't propagate sign bit */ |
| int ndigits = 0; |
| int sign = 1; |
| |
| CHECK_SMALL_INT(ival); |
| |
| if (ival < 0) { |
| ival = -ival; |
| sign = -1; |
| } |
| |
| /* Fast path for single-digits ints */ |
| if (!(ival>>PyLong_SHIFT)) { |
| v = _PyLong_New(1); |
| if (v) { |
| Py_SIZE(v) = sign; |
| v->ob_digit[0] = ival; |
| } |
| return (PyObject*)v; |
| } |
| |
| /* 2 digits */ |
| if (!(ival >> 2*PyLong_SHIFT)) { |
| v = _PyLong_New(2); |
| if (v) { |
| Py_SIZE(v) = 2*sign; |
| v->ob_digit[0] = (digit)ival & PyLong_MASK; |
| v->ob_digit[1] = ival >> PyLong_SHIFT; |
| } |
| return (PyObject*)v; |
| } |
| |
| /* Larger numbers: loop to determine number of digits */ |
| t = (unsigned long)ival; |
| while (t) { |
| ++ndigits; |
| t >>= PyLong_SHIFT; |
| } |
| v = _PyLong_New(ndigits); |
| if (v != NULL) { |
| digit *p = v->ob_digit; |
| Py_SIZE(v) = ndigits*sign; |
| t = (unsigned long)ival; |
| while (t) { |
| *p++ = (digit)(t & PyLong_MASK); |
| t >>= PyLong_SHIFT; |
| } |
| } |
| return (PyObject *)v; |
| } |
| |
| /* Create a new long int object from a C unsigned long int */ |
| |
| PyObject * |
| PyLong_FromUnsignedLong(unsigned long ival) |
| { |
| PyLongObject *v; |
| unsigned long t; |
| int ndigits = 0; |
| |
| if (ival < PyLong_BASE) |
| return PyLong_FromLong(ival); |
| /* Count the number of Python digits. */ |
| t = (unsigned long)ival; |
| while (t) { |
| ++ndigits; |
| t >>= PyLong_SHIFT; |
| } |
| v = _PyLong_New(ndigits); |
| if (v != NULL) { |
| digit *p = v->ob_digit; |
| Py_SIZE(v) = ndigits; |
| while (ival) { |
| *p++ = (digit)(ival & PyLong_MASK); |
| ival >>= PyLong_SHIFT; |
| } |
| } |
| return (PyObject *)v; |
| } |
| |
| /* Create a new long int object from a C double */ |
| |
| PyObject * |
| PyLong_FromDouble(double dval) |
| { |
| PyLongObject *v; |
| double frac; |
| int i, ndig, expo, neg; |
| neg = 0; |
| if (Py_IS_INFINITY(dval)) { |
| PyErr_SetString(PyExc_OverflowError, |
| "cannot convert float infinity to int"); |
| return NULL; |
| } |
| if (Py_IS_NAN(dval)) { |
| return PyLong_FromLong(0L); |
| } |
| if (dval < 0.0) { |
| neg = 1; |
| dval = -dval; |
| } |
| frac = frexp(dval, &expo); /* dval = frac*2**expo; 0.0 <= frac < 1.0 */ |
| if (expo <= 0) |
| return PyLong_FromLong(0L); |
| ndig = (expo-1) / PyLong_SHIFT + 1; /* Number of 'digits' in result */ |
| v = _PyLong_New(ndig); |
| if (v == NULL) |
| return NULL; |
| frac = ldexp(frac, (expo-1) % PyLong_SHIFT + 1); |
| for (i = ndig; --i >= 0; ) { |
| long bits = (long)frac; |
| v->ob_digit[i] = (digit) bits; |
| frac = frac - (double)bits; |
| frac = ldexp(frac, PyLong_SHIFT); |
| } |
| if (neg) |
| Py_SIZE(v) = -(Py_SIZE(v)); |
| return (PyObject *)v; |
| } |
| |
| /* Checking for overflow in PyLong_AsLong is a PITA since C doesn't define |
| * anything about what happens when a signed integer operation overflows, |
| * and some compilers think they're doing you a favor by being "clever" |
| * then. The bit pattern for the largest postive signed long is |
| * (unsigned long)LONG_MAX, and for the smallest negative signed long |
| * it is abs(LONG_MIN), which we could write -(unsigned long)LONG_MIN. |
| * However, some other compilers warn about applying unary minus to an |
| * unsigned operand. Hence the weird "0-". |
| */ |
| #define PY_ABS_LONG_MIN (0-(unsigned long)LONG_MIN) |
| #define PY_ABS_SSIZE_T_MIN (0-(size_t)PY_SSIZE_T_MIN) |
| |
| /* Get a C long int from a long int object. |
| Returns -1 and sets an error condition if overflow occurs. */ |
| |
| long |
| PyLong_AsLongAndOverflow(PyObject *vv, int *overflow) |
| { |
| /* This version by Tim Peters */ |
| register PyLongObject *v; |
| unsigned long x, prev; |
| long res; |
| Py_ssize_t i; |
| int sign; |
| int do_decref = 0; /* if nb_int was called */ |
| |
| *overflow = 0; |
| if (vv == NULL) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| |
| if (!PyLong_Check(vv)) { |
| PyNumberMethods *nb; |
| if ((nb = vv->ob_type->tp_as_number) == NULL || |
| nb->nb_int == NULL) { |
| PyErr_SetString(PyExc_TypeError, "an integer is required"); |
| return -1; |
| } |
| vv = (*nb->nb_int) (vv); |
| if (vv == NULL) |
| return -1; |
| do_decref = 1; |
| if (!PyLong_Check(vv)) { |
| Py_DECREF(vv); |
| PyErr_SetString(PyExc_TypeError, |
| "nb_int should return int object"); |
| return -1; |
| } |
| } |
| |
| res = -1; |
| v = (PyLongObject *)vv; |
| i = Py_SIZE(v); |
| |
| switch (i) { |
| case -1: |
| res = -v->ob_digit[0]; |
| break; |
| case 0: |
| res = 0; |
| break; |
| case 1: |
| res = v->ob_digit[0]; |
| break; |
| default: |
| sign = 1; |
| x = 0; |
| if (i < 0) { |
| sign = -1; |
| i = -(i); |
| } |
| while (--i >= 0) { |
| prev = x; |
| x = (x << PyLong_SHIFT) + v->ob_digit[i]; |
| if ((x >> PyLong_SHIFT) != prev) { |
| *overflow = Py_SIZE(v) > 0 ? 1 : -1; |
| goto exit; |
| } |
| } |
| /* Haven't lost any bits, but casting to long requires extra care |
| * (see comment above). |
| */ |
| if (x <= (unsigned long)LONG_MAX) { |
| res = (long)x * sign; |
| } |
| else if (sign < 0 && x == PY_ABS_LONG_MIN) { |
| res = LONG_MIN; |
| } |
| else { |
| *overflow = Py_SIZE(v) > 0 ? 1 : -1; |
| /* res is already set to -1 */ |
| } |
| } |
| exit: |
| if (do_decref) { |
| Py_DECREF(vv); |
| } |
| return res; |
| } |
| |
| long |
| PyLong_AsLong(PyObject *obj) |
| { |
| int overflow; |
| long result = PyLong_AsLongAndOverflow(obj, &overflow); |
| if (overflow) { |
| /* XXX: could be cute and give a different |
| message for overflow == -1 */ |
| PyErr_SetString(PyExc_OverflowError, |
| "Python int too large to convert to C long"); |
| } |
| return result; |
| } |
| |
| /* Get a Py_ssize_t from a long int object. |
| Returns -1 and sets an error condition if overflow occurs. */ |
| |
| Py_ssize_t |
| PyLong_AsSsize_t(PyObject *vv) { |
| register PyLongObject *v; |
| size_t x, prev; |
| Py_ssize_t i; |
| int sign; |
| |
| if (vv == NULL || !PyLong_Check(vv)) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| v = (PyLongObject *)vv; |
| i = Py_SIZE(v); |
| switch (i) { |
| case -1: return -v->ob_digit[0]; |
| case 0: return 0; |
| case 1: return v->ob_digit[0]; |
| } |
| sign = 1; |
| x = 0; |
| if (i < 0) { |
| sign = -1; |
| i = -(i); |
| } |
| while (--i >= 0) { |
| prev = x; |
| x = (x << PyLong_SHIFT) + v->ob_digit[i]; |
| if ((x >> PyLong_SHIFT) != prev) |
| goto overflow; |
| } |
| /* Haven't lost any bits, but casting to a signed type requires |
| * extra care (see comment above). |
| */ |
| if (x <= (size_t)PY_SSIZE_T_MAX) { |
| return (Py_ssize_t)x * sign; |
| } |
| else if (sign < 0 && x == PY_ABS_SSIZE_T_MIN) { |
| return PY_SSIZE_T_MIN; |
| } |
| /* else overflow */ |
| |
| overflow: |
| PyErr_SetString(PyExc_OverflowError, |
| "Python int too large to convert to C ssize_t"); |
| return -1; |
| } |
| |
| /* Get a C unsigned long int from a long int object. |
| Returns -1 and sets an error condition if overflow occurs. */ |
| |
| unsigned long |
| PyLong_AsUnsignedLong(PyObject *vv) |
| { |
| register PyLongObject *v; |
| unsigned long x, prev; |
| Py_ssize_t i; |
| |
| if (vv == NULL || !PyLong_Check(vv)) { |
| PyErr_BadInternalCall(); |
| return (unsigned long) -1; |
| } |
| v = (PyLongObject *)vv; |
| i = Py_SIZE(v); |
| x = 0; |
| if (i < 0) { |
| PyErr_SetString(PyExc_OverflowError, |
| "can't convert negative value to unsigned int"); |
| return (unsigned long) -1; |
| } |
| switch (i) { |
| case 0: return 0; |
| case 1: return v->ob_digit[0]; |
| } |
| while (--i >= 0) { |
| prev = x; |
| x = (x << PyLong_SHIFT) + v->ob_digit[i]; |
| if ((x >> PyLong_SHIFT) != prev) { |
| PyErr_SetString(PyExc_OverflowError, |
| "python int too large to convert to C unsigned long"); |
| return (unsigned long) -1; |
| } |
| } |
| return x; |
| } |
| |
| /* Get a C unsigned long int from a long int object. |
| Returns -1 and sets an error condition if overflow occurs. */ |
| |
| size_t |
| PyLong_AsSize_t(PyObject *vv) |
| { |
| register PyLongObject *v; |
| size_t x, prev; |
| Py_ssize_t i; |
| |
| if (vv == NULL || !PyLong_Check(vv)) { |
| PyErr_BadInternalCall(); |
| return (unsigned long) -1; |
| } |
| v = (PyLongObject *)vv; |
| i = Py_SIZE(v); |
| x = 0; |
| if (i < 0) { |
| PyErr_SetString(PyExc_OverflowError, |
| "can't convert negative value to size_t"); |
| return (size_t) -1; |
| } |
| switch (i) { |
| case 0: return 0; |
| case 1: return v->ob_digit[0]; |
| } |
| while (--i >= 0) { |
| prev = x; |
| x = (x << PyLong_SHIFT) + v->ob_digit[i]; |
| if ((x >> PyLong_SHIFT) != prev) { |
| PyErr_SetString(PyExc_OverflowError, |
| "Python int too large to convert to C size_t"); |
| return (unsigned long) -1; |
| } |
| } |
| return x; |
| } |
| |
| /* Get a C unsigned long int from a long int object, ignoring the high bits. |
| Returns -1 and sets an error condition if an error occurs. */ |
| |
| static unsigned long |
| _PyLong_AsUnsignedLongMask(PyObject *vv) |
| { |
| register PyLongObject *v; |
| unsigned long x; |
| Py_ssize_t i; |
| int sign; |
| |
| if (vv == NULL || !PyLong_Check(vv)) { |
| PyErr_BadInternalCall(); |
| return (unsigned long) -1; |
| } |
| v = (PyLongObject *)vv; |
| i = Py_SIZE(v); |
| switch (i) { |
| case 0: return 0; |
| case 1: return v->ob_digit[0]; |
| } |
| sign = 1; |
| x = 0; |
| if (i < 0) { |
| sign = -1; |
| i = -i; |
| } |
| while (--i >= 0) { |
| x = (x << PyLong_SHIFT) + v->ob_digit[i]; |
| } |
| return x * sign; |
| } |
| |
| unsigned long |
| PyLong_AsUnsignedLongMask(register PyObject *op) |
| { |
| PyNumberMethods *nb; |
| PyLongObject *lo; |
| unsigned long val; |
| |
| if (op && PyLong_Check(op)) |
| return _PyLong_AsUnsignedLongMask(op); |
| |
| if (op == NULL || (nb = op->ob_type->tp_as_number) == NULL || |
| nb->nb_int == NULL) { |
| PyErr_SetString(PyExc_TypeError, "an integer is required"); |
| return (unsigned long)-1; |
| } |
| |
| lo = (PyLongObject*) (*nb->nb_int) (op); |
| if (lo == NULL) |
| return (unsigned long)-1; |
| if (PyLong_Check(lo)) { |
| val = _PyLong_AsUnsignedLongMask((PyObject *)lo); |
| Py_DECREF(lo); |
| if (PyErr_Occurred()) |
| return (unsigned long)-1; |
| return val; |
| } |
| else |
| { |
| Py_DECREF(lo); |
| PyErr_SetString(PyExc_TypeError, |
| "nb_int should return int object"); |
| return (unsigned long)-1; |
| } |
| } |
| |
| int |
| _PyLong_Sign(PyObject *vv) |
| { |
| PyLongObject *v = (PyLongObject *)vv; |
| |
| assert(v != NULL); |
| assert(PyLong_Check(v)); |
| |
| return Py_SIZE(v) == 0 ? 0 : (Py_SIZE(v) < 0 ? -1 : 1); |
| } |
| |
| size_t |
| _PyLong_NumBits(PyObject *vv) |
| { |
| PyLongObject *v = (PyLongObject *)vv; |
| size_t result = 0; |
| Py_ssize_t ndigits; |
| |
| assert(v != NULL); |
| assert(PyLong_Check(v)); |
| ndigits = ABS(Py_SIZE(v)); |
| assert(ndigits == 0 || v->ob_digit[ndigits - 1] != 0); |
| if (ndigits > 0) { |
| digit msd = v->ob_digit[ndigits - 1]; |
| |
| result = (ndigits - 1) * PyLong_SHIFT; |
| if (result / PyLong_SHIFT != (size_t)(ndigits - 1)) |
| goto Overflow; |
| do { |
| ++result; |
| if (result == 0) |
| goto Overflow; |
| msd >>= 1; |
| } while (msd); |
| } |
| return result; |
| |
| Overflow: |
| PyErr_SetString(PyExc_OverflowError, "int has too many bits " |
| "to express in a platform size_t"); |
| return (size_t)-1; |
| } |
| |
| PyObject * |
| _PyLong_FromByteArray(const unsigned char* bytes, size_t n, |
| int little_endian, int is_signed) |
| { |
| const unsigned char* pstartbyte;/* LSB of bytes */ |
| int incr; /* direction to move pstartbyte */ |
| const unsigned char* pendbyte; /* MSB of bytes */ |
| size_t numsignificantbytes; /* number of bytes that matter */ |
| size_t ndigits; /* number of Python long digits */ |
| PyLongObject* v; /* result */ |
| int idigit = 0; /* next free index in v->ob_digit */ |
| |
| if (n == 0) |
| return PyLong_FromLong(0L); |
| |
| if (little_endian) { |
| pstartbyte = bytes; |
| pendbyte = bytes + n - 1; |
| incr = 1; |
| } |
| else { |
| pstartbyte = bytes + n - 1; |
| pendbyte = bytes; |
| incr = -1; |
| } |
| |
| if (is_signed) |
| is_signed = *pendbyte >= 0x80; |
| |
| /* Compute numsignificantbytes. This consists of finding the most |
| significant byte. Leading 0 bytes are insignficant if the number |
| is positive, and leading 0xff bytes if negative. */ |
| { |
| size_t i; |
| const unsigned char* p = pendbyte; |
| const int pincr = -incr; /* search MSB to LSB */ |
| const unsigned char insignficant = is_signed ? 0xff : 0x00; |
| |
| for (i = 0; i < n; ++i, p += pincr) { |
| if (*p != insignficant) |
| break; |
| } |
| numsignificantbytes = n - i; |
| /* 2's-comp is a bit tricky here, e.g. 0xff00 == -0x0100, so |
| actually has 2 significant bytes. OTOH, 0xff0001 == |
| -0x00ffff, so we wouldn't *need* to bump it there; but we |
| do for 0xffff = -0x0001. To be safe without bothering to |
| check every case, bump it regardless. */ |
| if (is_signed && numsignificantbytes < n) |
| ++numsignificantbytes; |
| } |
| |
| /* How many Python long digits do we need? We have |
| 8*numsignificantbytes bits, and each Python long digit has PyLong_SHIFT |
| bits, so it's the ceiling of the quotient. */ |
| ndigits = (numsignificantbytes * 8 + PyLong_SHIFT - 1) / PyLong_SHIFT; |
| if (ndigits > (size_t)INT_MAX) |
| return PyErr_NoMemory(); |
| v = _PyLong_New((int)ndigits); |
| if (v == NULL) |
| return NULL; |
| |
| /* Copy the bits over. The tricky parts are computing 2's-comp on |
| the fly for signed numbers, and dealing with the mismatch between |
| 8-bit bytes and (probably) 15-bit Python digits.*/ |
| { |
| size_t i; |
| twodigits carry = 1; /* for 2's-comp calculation */ |
| twodigits accum = 0; /* sliding register */ |
| unsigned int accumbits = 0; /* number of bits in accum */ |
| const unsigned char* p = pstartbyte; |
| |
| for (i = 0; i < numsignificantbytes; ++i, p += incr) { |
| twodigits thisbyte = *p; |
| /* Compute correction for 2's comp, if needed. */ |
| if (is_signed) { |
| thisbyte = (0xff ^ thisbyte) + carry; |
| carry = thisbyte >> 8; |
| thisbyte &= 0xff; |
| } |
| /* Because we're going LSB to MSB, thisbyte is |
| more significant than what's already in accum, |
| so needs to be prepended to accum. */ |
| accum |= thisbyte << accumbits; |
| accumbits += 8; |
| if (accumbits >= PyLong_SHIFT) { |
| /* There's enough to fill a Python digit. */ |
| assert(idigit < (int)ndigits); |
| v->ob_digit[idigit] = (digit)(accum & PyLong_MASK); |
| ++idigit; |
| accum >>= PyLong_SHIFT; |
| accumbits -= PyLong_SHIFT; |
| assert(accumbits < PyLong_SHIFT); |
| } |
| } |
| assert(accumbits < PyLong_SHIFT); |
| if (accumbits) { |
| assert(idigit < (int)ndigits); |
| v->ob_digit[idigit] = (digit)accum; |
| ++idigit; |
| } |
| } |
| |
| Py_SIZE(v) = is_signed ? -idigit : idigit; |
| return (PyObject *)long_normalize(v); |
| } |
| |
| int |
| _PyLong_AsByteArray(PyLongObject* v, |
| unsigned char* bytes, size_t n, |
| int little_endian, int is_signed) |
| { |
| int i; /* index into v->ob_digit */ |
| Py_ssize_t ndigits; /* |v->ob_size| */ |
| twodigits accum; /* sliding register */ |
| unsigned int accumbits; /* # bits in accum */ |
| int do_twos_comp; /* store 2's-comp? is_signed and v < 0 */ |
| twodigits carry; /* for computing 2's-comp */ |
| size_t j; /* # bytes filled */ |
| unsigned char* p; /* pointer to next byte in bytes */ |
| int pincr; /* direction to move p */ |
| |
| assert(v != NULL && PyLong_Check(v)); |
| |
| if (Py_SIZE(v) < 0) { |
| ndigits = -(Py_SIZE(v)); |
| if (!is_signed) { |
| PyErr_SetString(PyExc_TypeError, |
| "can't convert negative int to unsigned"); |
| return -1; |
| } |
| do_twos_comp = 1; |
| } |
| else { |
| ndigits = Py_SIZE(v); |
| do_twos_comp = 0; |
| } |
| |
| if (little_endian) { |
| p = bytes; |
| pincr = 1; |
| } |
| else { |
| p = bytes + n - 1; |
| pincr = -1; |
| } |
| |
| /* Copy over all the Python digits. |
| It's crucial that every Python digit except for the MSD contribute |
| exactly PyLong_SHIFT bits to the total, so first assert that the long is |
| normalized. */ |
| assert(ndigits == 0 || v->ob_digit[ndigits - 1] != 0); |
| j = 0; |
| accum = 0; |
| accumbits = 0; |
| carry = do_twos_comp ? 1 : 0; |
| for (i = 0; i < ndigits; ++i) { |
| twodigits thisdigit = v->ob_digit[i]; |
| if (do_twos_comp) { |
| thisdigit = (thisdigit ^ PyLong_MASK) + carry; |
| carry = thisdigit >> PyLong_SHIFT; |
| thisdigit &= PyLong_MASK; |
| } |
| /* Because we're going LSB to MSB, thisdigit is more |
| significant than what's already in accum, so needs to be |
| prepended to accum. */ |
| accum |= thisdigit << accumbits; |
| accumbits += PyLong_SHIFT; |
| |
| /* The most-significant digit may be (probably is) at least |
| partly empty. */ |
| if (i == ndigits - 1) { |
| /* Count # of sign bits -- they needn't be stored, |
| * although for signed conversion we need later to |
| * make sure at least one sign bit gets stored. |
| * First shift conceptual sign bit to real sign bit. |
| */ |
| stwodigits s = (stwodigits)(thisdigit << |
| (8*sizeof(stwodigits) - PyLong_SHIFT)); |
| unsigned int nsignbits = 0; |
| while ((s < 0) == do_twos_comp && nsignbits < PyLong_SHIFT) { |
| ++nsignbits; |
| s <<= 1; |
| } |
| accumbits -= nsignbits; |
| } |
| |
| /* Store as many bytes as possible. */ |
| while (accumbits >= 8) { |
| if (j >= n) |
| goto Overflow; |
| ++j; |
| *p = (unsigned char)(accum & 0xff); |
| p += pincr; |
| accumbits -= 8; |
| accum >>= 8; |
| } |
| } |
| |
| /* Store the straggler (if any). */ |
| assert(accumbits < 8); |
| assert(carry == 0); /* else do_twos_comp and *every* digit was 0 */ |
| if (accumbits > 0) { |
| if (j >= n) |
| goto Overflow; |
| ++j; |
| if (do_twos_comp) { |
| /* Fill leading bits of the byte with sign bits |
| (appropriately pretending that the long had an |
| infinite supply of sign bits). */ |
| accum |= (~(twodigits)0) << accumbits; |
| } |
| *p = (unsigned char)(accum & 0xff); |
| p += pincr; |
| } |
| else if (j == n && n > 0 && is_signed) { |
| /* The main loop filled the byte array exactly, so the code |
| just above didn't get to ensure there's a sign bit, and the |
| loop below wouldn't add one either. Make sure a sign bit |
| exists. */ |
| unsigned char msb = *(p - pincr); |
| int sign_bit_set = msb >= 0x80; |
| assert(accumbits == 0); |
| if (sign_bit_set == do_twos_comp) |
| return 0; |
| else |
| goto Overflow; |
| } |
| |
| /* Fill remaining bytes with copies of the sign bit. */ |
| { |
| unsigned char signbyte = do_twos_comp ? 0xffU : 0U; |
| for ( ; j < n; ++j, p += pincr) |
| *p = signbyte; |
| } |
| |
| return 0; |
| |
| Overflow: |
| PyErr_SetString(PyExc_OverflowError, "int too big to convert"); |
| return -1; |
| |
| } |
| |
| double |
| _PyLong_AsScaledDouble(PyObject *vv, int *exponent) |
| { |
| /* NBITS_WANTED should be > the number of bits in a double's precision, |
| but small enough so that 2**NBITS_WANTED is within the normal double |
| range. nbitsneeded is set to 1 less than that because the most-significant |
| Python digit contains at least 1 significant bit, but we don't want to |
| bother counting them (catering to the worst case cheaply). |
| |
| 57 is one more than VAX-D double precision; I (Tim) don't know of a double |
| format with more precision than that; it's 1 larger so that we add in at |
| least one round bit to stand in for the ignored least-significant bits. |
| */ |
| #define NBITS_WANTED 57 |
| PyLongObject *v; |
| double x; |
| const double multiplier = (double)(1L << PyLong_SHIFT); |
| Py_ssize_t i; |
| int sign; |
| int nbitsneeded; |
| |
| if (vv == NULL || !PyLong_Check(vv)) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| v = (PyLongObject *)vv; |
| i = Py_SIZE(v); |
| sign = 1; |
| if (i < 0) { |
| sign = -1; |
| i = -(i); |
| } |
| else if (i == 0) { |
| *exponent = 0; |
| return 0.0; |
| } |
| --i; |
| x = (double)v->ob_digit[i]; |
| nbitsneeded = NBITS_WANTED - 1; |
| /* Invariant: i Python digits remain unaccounted for. */ |
| while (i > 0 && nbitsneeded > 0) { |
| --i; |
| x = x * multiplier + (double)v->ob_digit[i]; |
| nbitsneeded -= PyLong_SHIFT; |
| } |
| /* There are i digits we didn't shift in. Pretending they're all |
| zeroes, the true value is x * 2**(i*PyLong_SHIFT). */ |
| *exponent = i; |
| assert(x > 0.0); |
| return x * sign; |
| #undef NBITS_WANTED |
| } |
| |
| /* Get a C double from a long int object. */ |
| |
| double |
| PyLong_AsDouble(PyObject *vv) |
| { |
| int e = -1; |
| double x; |
| |
| if (vv == NULL || !PyLong_Check(vv)) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| x = _PyLong_AsScaledDouble(vv, &e); |
| if (x == -1.0 && PyErr_Occurred()) |
| return -1.0; |
| /* 'e' initialized to -1 to silence gcc-4.0.x, but it should be |
| set correctly after a successful _PyLong_AsScaledDouble() call */ |
| assert(e >= 0); |
| if (e > INT_MAX / PyLong_SHIFT) |
| goto overflow; |
| errno = 0; |
| x = ldexp(x, e * PyLong_SHIFT); |
| if (Py_OVERFLOWED(x)) |
| goto overflow; |
| return x; |
| |
| overflow: |
| PyErr_SetString(PyExc_OverflowError, |
| "Python int too large to convert to C double"); |
| return -1.0; |
| } |
| |
| /* Create a new long (or int) object from a C pointer */ |
| |
| PyObject * |
| PyLong_FromVoidPtr(void *p) |
| { |
| #ifndef HAVE_LONG_LONG |
| # error "PyLong_FromVoidPtr: sizeof(void*) > sizeof(long), but no long long" |
| #endif |
| #if SIZEOF_LONG_LONG < SIZEOF_VOID_P |
| # error "PyLong_FromVoidPtr: sizeof(PY_LONG_LONG) < sizeof(void*)" |
| #endif |
| /* special-case null pointer */ |
| if (!p) |
| return PyLong_FromLong(0); |
| return PyLong_FromUnsignedLongLong((unsigned PY_LONG_LONG)(Py_uintptr_t)p); |
| |
| } |
| |
| /* Get a C pointer from a long object (or an int object in some cases) */ |
| |
| void * |
| PyLong_AsVoidPtr(PyObject *vv) |
| { |
| /* This function will allow int or long objects. If vv is neither, |
| then the PyLong_AsLong*() functions will raise the exception: |
| PyExc_SystemError, "bad argument to internal function" |
| */ |
| #if SIZEOF_VOID_P <= SIZEOF_LONG |
| long x; |
| |
| if (PyLong_Check(vv) && _PyLong_Sign(vv) < 0) |
| x = PyLong_AsLong(vv); |
| else |
| x = PyLong_AsUnsignedLong(vv); |
| #else |
| |
| #ifndef HAVE_LONG_LONG |
| # error "PyLong_AsVoidPtr: sizeof(void*) > sizeof(long), but no long long" |
| #endif |
| #if SIZEOF_LONG_LONG < SIZEOF_VOID_P |
| # error "PyLong_AsVoidPtr: sizeof(PY_LONG_LONG) < sizeof(void*)" |
| #endif |
| PY_LONG_LONG x; |
| |
| if (PyLong_Check(vv) && _PyLong_Sign(vv) < 0) |
| x = PyLong_AsLongLong(vv); |
| else |
| x = PyLong_AsUnsignedLongLong(vv); |
| |
| #endif /* SIZEOF_VOID_P <= SIZEOF_LONG */ |
| |
| if (x == -1 && PyErr_Occurred()) |
| return NULL; |
| return (void *)x; |
| } |
| |
| #ifdef HAVE_LONG_LONG |
| |
| /* Initial PY_LONG_LONG support by Chris Herborth (chrish@qnx.com), later |
| * rewritten to use the newer PyLong_{As,From}ByteArray API. |
| */ |
| |
| #define IS_LITTLE_ENDIAN (int)*(unsigned char*)&one |
| |
| /* Create a new long int object from a C PY_LONG_LONG int. */ |
| |
| PyObject * |
| PyLong_FromLongLong(PY_LONG_LONG ival) |
| { |
| PyLongObject *v; |
| unsigned PY_LONG_LONG t; /* unsigned so >> doesn't propagate sign bit */ |
| int ndigits = 0; |
| int negative = 0; |
| |
| CHECK_SMALL_INT(ival); |
| if (ival < 0) { |
| ival = -ival; |
| negative = 1; |
| } |
| |
| /* Count the number of Python digits. |
| We used to pick 5 ("big enough for anything"), but that's a |
| waste of time and space given that 5*15 = 75 bits are rarely |
| needed. */ |
| t = (unsigned PY_LONG_LONG)ival; |
| while (t) { |
| ++ndigits; |
| t >>= PyLong_SHIFT; |
| } |
| v = _PyLong_New(ndigits); |
| if (v != NULL) { |
| digit *p = v->ob_digit; |
| Py_SIZE(v) = negative ? -ndigits : ndigits; |
| t = (unsigned PY_LONG_LONG)ival; |
| while (t) { |
| *p++ = (digit)(t & PyLong_MASK); |
| t >>= PyLong_SHIFT; |
| } |
| } |
| return (PyObject *)v; |
| } |
| |
| /* Create a new long int object from a C unsigned PY_LONG_LONG int. */ |
| |
| PyObject * |
| PyLong_FromUnsignedLongLong(unsigned PY_LONG_LONG ival) |
| { |
| PyLongObject *v; |
| unsigned PY_LONG_LONG t; |
| int ndigits = 0; |
| |
| if (ival < PyLong_BASE) |
| return PyLong_FromLong(ival); |
| /* Count the number of Python digits. */ |
| t = (unsigned PY_LONG_LONG)ival; |
| while (t) { |
| ++ndigits; |
| t >>= PyLong_SHIFT; |
| } |
| v = _PyLong_New(ndigits); |
| if (v != NULL) { |
| digit *p = v->ob_digit; |
| Py_SIZE(v) = ndigits; |
| while (ival) { |
| *p++ = (digit)(ival & PyLong_MASK); |
| ival >>= PyLong_SHIFT; |
| } |
| } |
| return (PyObject *)v; |
| } |
| |
| /* Create a new long int object from a C Py_ssize_t. */ |
| |
| PyObject * |
| PyLong_FromSsize_t(Py_ssize_t ival) |
| { |
| Py_ssize_t bytes = ival; |
| int one = 1; |
| if (ival < PyLong_BASE) |
| return PyLong_FromLong(ival); |
| return _PyLong_FromByteArray( |
| (unsigned char *)&bytes, |
| SIZEOF_SIZE_T, IS_LITTLE_ENDIAN, 1); |
| } |
| |
| /* Create a new long int object from a C size_t. */ |
| |
| PyObject * |
| PyLong_FromSize_t(size_t ival) |
| { |
| size_t bytes = ival; |
| int one = 1; |
| if (ival < PyLong_BASE) |
| return PyLong_FromLong(ival); |
| return _PyLong_FromByteArray( |
| (unsigned char *)&bytes, |
| SIZEOF_SIZE_T, IS_LITTLE_ENDIAN, 0); |
| } |
| |
| /* Get a C PY_LONG_LONG int from a long int object. |
| Return -1 and set an error if overflow occurs. */ |
| |
| PY_LONG_LONG |
| PyLong_AsLongLong(PyObject *vv) |
| { |
| PyLongObject *v; |
| PY_LONG_LONG bytes; |
| int one = 1; |
| int res; |
| |
| if (vv == NULL) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| if (!PyLong_Check(vv)) { |
| PyNumberMethods *nb; |
| PyObject *io; |
| if ((nb = vv->ob_type->tp_as_number) == NULL || |
| nb->nb_int == NULL) { |
| PyErr_SetString(PyExc_TypeError, "an integer is required"); |
| return -1; |
| } |
| io = (*nb->nb_int) (vv); |
| if (io == NULL) |
| return -1; |
| if (PyLong_Check(io)) { |
| bytes = PyLong_AsLongLong(io); |
| Py_DECREF(io); |
| return bytes; |
| } |
| Py_DECREF(io); |
| PyErr_SetString(PyExc_TypeError, "integer conversion failed"); |
| return -1; |
| } |
| |
| v = (PyLongObject*)vv; |
| switch(Py_SIZE(v)) { |
| case -1: return -v->ob_digit[0]; |
| case 0: return 0; |
| case 1: return v->ob_digit[0]; |
| } |
| res = _PyLong_AsByteArray( |
| (PyLongObject *)vv, (unsigned char *)&bytes, |
| SIZEOF_LONG_LONG, IS_LITTLE_ENDIAN, 1); |
| |
| /* Plan 9 can't handle PY_LONG_LONG in ? : expressions */ |
| if (res < 0) |
| return (PY_LONG_LONG)-1; |
| else |
| return bytes; |
| } |
| |
| /* Get a C unsigned PY_LONG_LONG int from a long int object. |
| Return -1 and set an error if overflow occurs. */ |
| |
| unsigned PY_LONG_LONG |
| PyLong_AsUnsignedLongLong(PyObject *vv) |
| { |
| PyLongObject *v; |
| unsigned PY_LONG_LONG bytes; |
| int one = 1; |
| int res; |
| |
| if (vv == NULL || !PyLong_Check(vv)) { |
| PyErr_BadInternalCall(); |
| return (unsigned PY_LONG_LONG)-1; |
| } |
| |
| v = (PyLongObject*)vv; |
| switch(Py_SIZE(v)) { |
| case 0: return 0; |
| case 1: return v->ob_digit[0]; |
| } |
| |
| res = _PyLong_AsByteArray( |
| (PyLongObject *)vv, (unsigned char *)&bytes, |
| SIZEOF_LONG_LONG, IS_LITTLE_ENDIAN, 0); |
| |
| /* Plan 9 can't handle PY_LONG_LONG in ? : expressions */ |
| if (res < 0) |
| return (unsigned PY_LONG_LONG)res; |
| else |
| return bytes; |
| } |
| |
| /* Get a C unsigned long int from a long int object, ignoring the high bits. |
| Returns -1 and sets an error condition if an error occurs. */ |
| |
| static unsigned PY_LONG_LONG |
| _PyLong_AsUnsignedLongLongMask(PyObject *vv) |
| { |
| register PyLongObject *v; |
| unsigned PY_LONG_LONG x; |
| Py_ssize_t i; |
| int sign; |
| |
| if (vv == NULL || !PyLong_Check(vv)) { |
| PyErr_BadInternalCall(); |
| return (unsigned long) -1; |
| } |
| v = (PyLongObject *)vv; |
| switch(Py_SIZE(v)) { |
| case 0: return 0; |
| case 1: return v->ob_digit[0]; |
| } |
| i = Py_SIZE(v); |
| sign = 1; |
| x = 0; |
| if (i < 0) { |
| sign = -1; |
| i = -i; |
| } |
| while (--i >= 0) { |
| x = (x << PyLong_SHIFT) + v->ob_digit[i]; |
| } |
| return x * sign; |
| } |
| |
| unsigned PY_LONG_LONG |
| PyLong_AsUnsignedLongLongMask(register PyObject *op) |
| { |
| PyNumberMethods *nb; |
| PyLongObject *lo; |
| unsigned PY_LONG_LONG val; |
| |
| if (op && PyLong_Check(op)) |
| return _PyLong_AsUnsignedLongLongMask(op); |
| |
| if (op == NULL || (nb = op->ob_type->tp_as_number) == NULL || |
| nb->nb_int == NULL) { |
| PyErr_SetString(PyExc_TypeError, "an integer is required"); |
| return (unsigned PY_LONG_LONG)-1; |
| } |
| |
| lo = (PyLongObject*) (*nb->nb_int) (op); |
| if (lo == NULL) |
| return (unsigned PY_LONG_LONG)-1; |
| if (PyLong_Check(lo)) { |
| val = _PyLong_AsUnsignedLongLongMask((PyObject *)lo); |
| Py_DECREF(lo); |
| if (PyErr_Occurred()) |
| return (unsigned PY_LONG_LONG)-1; |
| return val; |
| } |
| else |
| { |
| Py_DECREF(lo); |
| PyErr_SetString(PyExc_TypeError, |
| "nb_int should return int object"); |
| return (unsigned PY_LONG_LONG)-1; |
| } |
| } |
| #undef IS_LITTLE_ENDIAN |
| |
| #endif /* HAVE_LONG_LONG */ |
| |
| #define CHECK_BINOP(v,w) \ |
| if (!PyLong_Check(v) || !PyLong_Check(w)) { \ |
| Py_INCREF(Py_NotImplemented); \ |
| return Py_NotImplemented; \ |
| } |
| |
| /* x[0:m] and y[0:n] are digit vectors, LSD first, m >= n required. x[0:n] |
| * is modified in place, by adding y to it. Carries are propagated as far as |
| * x[m-1], and the remaining carry (0 or 1) is returned. |
| */ |
| static digit |
| v_iadd(digit *x, Py_ssize_t m, digit *y, Py_ssize_t n) |
| { |
| int i; |
| digit carry = 0; |
| |
| assert(m >= n); |
| for (i = 0; i < n; ++i) { |
| carry += x[i] + y[i]; |
| x[i] = carry & PyLong_MASK; |
| carry >>= PyLong_SHIFT; |
| assert((carry & 1) == carry); |
| } |
| for (; carry && i < m; ++i) { |
| carry += x[i]; |
| x[i] = carry & PyLong_MASK; |
| carry >>= PyLong_SHIFT; |
| assert((carry & 1) == carry); |
| } |
| return carry; |
| } |
| |
| /* x[0:m] and y[0:n] are digit vectors, LSD first, m >= n required. x[0:n] |
| * is modified in place, by subtracting y from it. Borrows are propagated as |
| * far as x[m-1], and the remaining borrow (0 or 1) is returned. |
| */ |
| static digit |
| v_isub(digit *x, Py_ssize_t m, digit *y, Py_ssize_t n) |
| { |
| int i; |
| digit borrow = 0; |
| |
| assert(m >= n); |
| for (i = 0; i < n; ++i) { |
| borrow = x[i] - y[i] - borrow; |
| x[i] = borrow & PyLong_MASK; |
| borrow >>= PyLong_SHIFT; |
| borrow &= 1; /* keep only 1 sign bit */ |
| } |
| for (; borrow && i < m; ++i) { |
| borrow = x[i] - borrow; |
| x[i] = borrow & PyLong_MASK; |
| borrow >>= PyLong_SHIFT; |
| borrow &= 1; |
| } |
| return borrow; |
| } |
| |
| /* Multiply by a single digit, ignoring the sign. */ |
| |
| static PyLongObject * |
| mul1(PyLongObject *a, wdigit n) |
| { |
| return muladd1(a, n, (digit)0); |
| } |
| |
| /* Multiply by a single digit and add a single digit, ignoring the sign. */ |
| |
| static PyLongObject * |
| muladd1(PyLongObject *a, wdigit n, wdigit extra) |
| { |
| Py_ssize_t size_a = ABS(Py_SIZE(a)); |
| PyLongObject *z = _PyLong_New(size_a+1); |
| twodigits carry = extra; |
| Py_ssize_t i; |
| |
| if (z == NULL) |
| return NULL; |
| for (i = 0; i < size_a; ++i) { |
| carry += (twodigits)a->ob_digit[i] * n; |
| z->ob_digit[i] = (digit) (carry & PyLong_MASK); |
| carry >>= PyLong_SHIFT; |
| } |
| z->ob_digit[i] = (digit) carry; |
| return long_normalize(z); |
| } |
| |
| /* Divide long pin, w/ size digits, by non-zero digit n, storing quotient |
| in pout, and returning the remainder. pin and pout point at the LSD. |
| It's OK for pin == pout on entry, which saves oodles of mallocs/frees in |
| _PyLong_Format, but that should be done with great care since longs are |
| immutable. */ |
| |
| static digit |
| inplace_divrem1(digit *pout, digit *pin, Py_ssize_t size, digit n) |
| { |
| twodigits rem = 0; |
| |
| assert(n > 0 && n <= PyLong_MASK); |
| pin += size; |
| pout += size; |
| while (--size >= 0) { |
| digit hi; |
| rem = (rem << PyLong_SHIFT) + *--pin; |
| *--pout = hi = (digit)(rem / n); |
| rem -= hi * n; |
| } |
| return (digit)rem; |
| } |
| |
| /* Divide a long integer by a digit, returning both the quotient |
| (as function result) and the remainder (through *prem). |
| The sign of a is ignored; n should not be zero. */ |
| |
| static PyLongObject * |
| divrem1(PyLongObject *a, digit n, digit *prem) |
| { |
| const Py_ssize_t size = ABS(Py_SIZE(a)); |
| PyLongObject *z; |
| |
| assert(n > 0 && n <= PyLong_MASK); |
| z = _PyLong_New(size); |
| if (z == NULL) |
| return NULL; |
| *prem = inplace_divrem1(z->ob_digit, a->ob_digit, size, n); |
| return long_normalize(z); |
| } |
| |
| /* Convert a long int object to a string, using a given conversion base. |
| Return a string object. |
| If base is 2, 8 or 16, add the proper prefix '0b', '0o' or '0x'. */ |
| |
| PyObject * |
| _PyLong_Format(PyObject *aa, int base) |
| { |
| register PyLongObject *a = (PyLongObject *)aa; |
| PyObject *str; |
| Py_ssize_t i, j, sz; |
| Py_ssize_t size_a; |
| Py_UNICODE *p; |
| int bits; |
| char sign = '\0'; |
| |
| if (a == NULL || !PyLong_Check(a)) { |
| PyErr_BadInternalCall(); |
| return NULL; |
| } |
| assert(base >= 2 && base <= 36); |
| size_a = ABS(Py_SIZE(a)); |
| |
| /* Compute a rough upper bound for the length of the string */ |
| i = base; |
| bits = 0; |
| while (i > 1) { |
| ++bits; |
| i >>= 1; |
| } |
| i = 5; |
| j = size_a*PyLong_SHIFT + bits-1; |
| sz = i + j / bits; |
| if (j / PyLong_SHIFT < size_a || sz < i) { |
| PyErr_SetString(PyExc_OverflowError, |
| "int is too large to format"); |
| return NULL; |
| } |
| str = PyUnicode_FromUnicode(NULL, sz); |
| if (str == NULL) |
| return NULL; |
| p = PyUnicode_AS_UNICODE(str) + sz; |
| *p = '\0'; |
| if (Py_SIZE(a) < 0) |
| sign = '-'; |
| |
| if (Py_SIZE(a) == 0) { |
| *--p = '0'; |
| } |
| else if ((base & (base - 1)) == 0) { |
| /* JRH: special case for power-of-2 bases */ |
| twodigits accum = 0; |
| int accumbits = 0; /* # of bits in accum */ |
| int basebits = 1; /* # of bits in base-1 */ |
| i = base; |
| while ((i >>= 1) > 1) |
| ++basebits; |
| |
| for (i = 0; i < size_a; ++i) { |
| accum |= (twodigits)a->ob_digit[i] << accumbits; |
| accumbits += PyLong_SHIFT; |
| assert(accumbits >= basebits); |
| do { |
| char cdigit = (char)(accum & (base - 1)); |
| cdigit += (cdigit < 10) ? '0' : 'a'-10; |
| assert(p > PyUnicode_AS_UNICODE(str)); |
| *--p = cdigit; |
| accumbits -= basebits; |
| accum >>= basebits; |
| } while (i < size_a-1 ? accumbits >= basebits : |
| accum > 0); |
| } |
| } |
| else { |
| /* Not 0, and base not a power of 2. Divide repeatedly by |
| base, but for speed use the highest power of base that |
| fits in a digit. */ |
| Py_ssize_t size = size_a; |
| digit *pin = a->ob_digit; |
| PyLongObject *scratch; |
| /* powbasw <- largest power of base that fits in a digit. */ |
| digit powbase = base; /* powbase == base ** power */ |
| int power = 1; |
| for (;;) { |
| unsigned long newpow = powbase * (unsigned long)base; |
| if (newpow >> PyLong_SHIFT) /* doesn't fit in a digit */ |
| break; |
| powbase = (digit)newpow; |
| ++power; |
| } |
| |
| /* Get a scratch area for repeated division. */ |
| scratch = _PyLong_New(size); |
| if (scratch == NULL) { |
| Py_DECREF(str); |
| return NULL; |
| } |
| |
| /* Repeatedly divide by powbase. */ |
| do { |
| int ntostore = power; |
| digit rem = inplace_divrem1(scratch->ob_digit, |
| pin, size, powbase); |
| pin = scratch->ob_digit; /* no need to use a again */ |
| if (pin[size - 1] == 0) |
| --size; |
| SIGCHECK({ |
| Py_DECREF(scratch); |
| Py_DECREF(str); |
| return NULL; |
| }) |
| |
| /* Break rem into digits. */ |
| assert(ntostore > 0); |
| do { |
| digit nextrem = (digit)(rem / base); |
| char c = (char)(rem - nextrem * base); |
| assert(p > PyUnicode_AS_UNICODE(str)); |
| c += (c < 10) ? '0' : 'a'-10; |
| *--p = c; |
| rem = nextrem; |
| --ntostore; |
| /* Termination is a bit delicate: must not |
| store leading zeroes, so must get out if |
| remaining quotient and rem are both 0. */ |
| } while (ntostore && (size || rem)); |
| } while (size != 0); |
| Py_DECREF(scratch); |
| } |
| |
| if (base == 16) { |
| *--p = 'x'; |
| *--p = '0'; |
| } |
| else if (base == 8) { |
| *--p = 'o'; |
| *--p = '0'; |
| } |
| else if (base == 2) { |
| *--p = 'b'; |
| *--p = '0'; |
| } |
| else if (base != 10) { |
| *--p = '#'; |
| *--p = '0' + base%10; |
| if (base > 10) |
| *--p = '0' + base/10; |
| } |
| if (sign) |
| *--p = sign; |
| if (p != PyUnicode_AS_UNICODE(str)) { |
| Py_UNICODE *q = PyUnicode_AS_UNICODE(str); |
| assert(p > q); |
| do { |
| } while ((*q++ = *p++) != '\0'); |
| q--; |
| if (PyUnicode_Resize(&str, (Py_ssize_t) (q - PyUnicode_AS_UNICODE(str)))) { |
| Py_DECREF(str); |
| return NULL; |
| } |
| } |
| return (PyObject *)str; |
| } |
| |
| /* Table of digit values for 8-bit string -> integer conversion. |
| * '0' maps to 0, ..., '9' maps to 9. |
| * 'a' and 'A' map to 10, ..., 'z' and 'Z' map to 35. |
| * All other indices map to 37. |
| * Note that when converting a base B string, a char c is a legitimate |
| * base B digit iff _PyLong_DigitValue[Py_CHARPyLong_MASK(c)] < B. |
| */ |
| int _PyLong_DigitValue[256] = { |
| 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, |
| 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, |
| 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, |
| 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 37, 37, 37, 37, 37, 37, |
| 37, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, |
| 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 37, 37, 37, 37, 37, |
| 37, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, |
| 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 37, 37, 37, 37, 37, |
| 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, |
| 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, |
| 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, |
| 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, |
| 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, |
| 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, |
| 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, |
| 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, |
| }; |
| |
| /* *str points to the first digit in a string of base `base` digits. base |
| * is a power of 2 (2, 4, 8, 16, or 32). *str is set to point to the first |
| * non-digit (which may be *str!). A normalized long is returned. |
| * The point to this routine is that it takes time linear in the number of |
| * string characters. |
| */ |
| static PyLongObject * |
| long_from_binary_base(char **str, int base) |
| { |
| char *p = *str; |
| char *start = p; |
| int bits_per_char; |
| Py_ssize_t n; |
| PyLongObject *z; |
| twodigits accum; |
| int bits_in_accum; |
| digit *pdigit; |
| |
| assert(base >= 2 && base <= 32 && (base & (base - 1)) == 0); |
| n = base; |
| for (bits_per_char = -1; n; ++bits_per_char) |
| n >>= 1; |
| /* n <- total # of bits needed, while setting p to end-of-string */ |
| n = 0; |
| while (_PyLong_DigitValue[Py_CHARMASK(*p)] < base) |
| ++p; |
| *str = p; |
| /* n <- # of Python digits needed, = ceiling(n/PyLong_SHIFT). */ |
| n = (p - start) * bits_per_char + PyLong_SHIFT - 1; |
| if (n / bits_per_char < p - start) { |
| PyErr_SetString(PyExc_ValueError, |
| "int string too large to convert"); |
| return NULL; |
| } |
| n = n / PyLong_SHIFT; |
| z = _PyLong_New(n); |
| if (z == NULL) |
| return NULL; |
| /* Read string from right, and fill in long from left; i.e., |
| * from least to most significant in both. |
| */ |
| accum = 0; |
| bits_in_accum = 0; |
| pdigit = z->ob_digit; |
| while (--p >= start) { |
| int k = _PyLong_DigitValue[Py_CHARMASK(*p)]; |
| assert(k >= 0 && k < base); |
| accum |= (twodigits)(k << bits_in_accum); |
| bits_in_accum += bits_per_char; |
| if (bits_in_accum >= PyLong_SHIFT) { |
| *pdigit++ = (digit)(accum & PyLong_MASK); |
| assert(pdigit - z->ob_digit <= (int)n); |
| accum >>= PyLong_SHIFT; |
| bits_in_accum -= PyLong_SHIFT; |
| assert(bits_in_accum < PyLong_SHIFT); |
| } |
| } |
| if (bits_in_accum) { |
| assert(bits_in_accum <= PyLong_SHIFT); |
| *pdigit++ = (digit)accum; |
| assert(pdigit - z->ob_digit <= (int)n); |
| } |
| while (pdigit - z->ob_digit < n) |
| *pdigit++ = 0; |
| return long_normalize(z); |
| } |
| |
| PyObject * |
| PyLong_FromString(char *str, char **pend, int base) |
| { |
| int sign = 1, error_if_nonzero = 0; |
| char *start, *orig_str = str; |
| PyLongObject *z = NULL; |
| PyObject *strobj; |
| Py_ssize_t slen; |
| |
| if ((base != 0 && base < 2) || base > 36) { |
| PyErr_SetString(PyExc_ValueError, |
| "int() arg 2 must be >= 2 and <= 36"); |
| return NULL; |
| } |
| while (*str != '\0' && isspace(Py_CHARMASK(*str))) |
| str++; |
| if (*str == '+') |
| ++str; |
| else if (*str == '-') { |
| ++str; |
| sign = -1; |
| } |
| while (*str != '\0' && isspace(Py_CHARMASK(*str))) |
| str++; |
| if (base == 0) { |
| if (str[0] != '0') |
| base = 10; |
| else if (str[1] == 'x' || str[1] == 'X') |
| base = 16; |
| else if (str[1] == 'o' || str[1] == 'O') |
| base = 8; |
| else if (str[1] == 'b' || str[1] == 'B') |
| base = 2; |
| else { |
| /* "old" (C-style) octal literal, now invalid. |
| it might still be zero though */ |
| error_if_nonzero = 1; |
| base = 10; |
| } |
| } |
| if (str[0] == '0' && |
| ((base == 16 && (str[1] == 'x' || str[1] == 'X')) || |
| (base == 8 && (str[1] == 'o' || str[1] == 'O')) || |
| (base == 2 && (str[1] == 'b' || str[1] == 'B')))) |
| str += 2; |
| |
| start = str; |
| if ((base & (base - 1)) == 0) |
| z = long_from_binary_base(&str, base); |
| else { |
| /*** |
| Binary bases can be converted in time linear in the number of digits, because |
| Python's representation base is binary. Other bases (including decimal!) use |
| the simple quadratic-time algorithm below, complicated by some speed tricks. |
| |
| First some math: the largest integer that can be expressed in N base-B digits |
| is B**N-1. Consequently, if we have an N-digit input in base B, the worst- |
| case number of Python digits needed to hold it is the smallest integer n s.t. |
| |
| BASE**n-1 >= B**N-1 [or, adding 1 to both sides] |
| BASE**n >= B**N [taking logs to base BASE] |
| n >= log(B**N)/log(BASE) = N * log(B)/log(BASE) |
| |
| The static array log_base_BASE[base] == log(base)/log(BASE) so we can compute |
| this quickly. A Python long with that much space is reserved near the start, |
| and the result is computed into it. |
| |
| The input string is actually treated as being in base base**i (i.e., i digits |
| are processed at a time), where two more static arrays hold: |
| |
| convwidth_base[base] = the largest integer i such that base**i <= BASE |
| convmultmax_base[base] = base ** convwidth_base[base] |
| |
| The first of these is the largest i such that i consecutive input digits |
| must fit in a single Python digit. The second is effectively the input |
| base we're really using. |
| |
| Viewing the input as a sequence <c0, c1, ..., c_n-1> of digits in base |
| convmultmax_base[base], the result is "simply" |
| |
| (((c0*B + c1)*B + c2)*B + c3)*B + ... ))) + c_n-1 |
| |
| where B = convmultmax_base[base]. |
| |
| Error analysis: as above, the number of Python digits `n` needed is worst- |
| case |
| |
| n >= N * log(B)/log(BASE) |
| |
| where `N` is the number of input digits in base `B`. This is computed via |
| |
| size_z = (Py_ssize_t)((scan - str) * log_base_BASE[base]) + 1; |
| |
| below. Two numeric concerns are how much space this can waste, and whether |
| the computed result can be too small. To be concrete, assume BASE = 2**15, |
| which is the default (and it's unlikely anyone changes that). |
| |
| Waste isn't a problem: provided the first input digit isn't 0, the difference |
| between the worst-case input with N digits and the smallest input with N |
| digits is about a factor of B, but B is small compared to BASE so at most |
| one allocated Python digit can remain unused on that count. If |
| N*log(B)/log(BASE) is mathematically an exact integer, then truncating that |
| and adding 1 returns a result 1 larger than necessary. However, that can't |
| happen: whenever B is a power of 2, long_from_binary_base() is called |
| instead, and it's impossible for B**i to be an integer power of 2**15 when |
| B is not a power of 2 (i.e., it's impossible for N*log(B)/log(BASE) to be |
| an exact integer when B is not a power of 2, since B**i has a prime factor |
| other than 2 in that case, but (2**15)**j's only prime factor is 2). |
| |
| The computed result can be too small if the true value of N*log(B)/log(BASE) |
| is a little bit larger than an exact integer, but due to roundoff errors (in |
| computing log(B), log(BASE), their quotient, and/or multiplying that by N) |
| yields a numeric result a little less than that integer. Unfortunately, "how |
| close can a transcendental function get to an integer over some range?" |
| questions are generally theoretically intractable. Computer analysis via |
| continued fractions is practical: expand log(B)/log(BASE) via continued |
| fractions, giving a sequence i/j of "the best" rational approximations. Then |
| j*log(B)/log(BASE) is approximately equal to (the integer) i. This shows that |
| we can get very close to being in trouble, but very rarely. For example, |
| 76573 is a denominator in one of the continued-fraction approximations to |
| log(10)/log(2**15), and indeed: |
| |
| >>> log(10)/log(2**15)*76573 |
| 16958.000000654003 |
| |
| is very close to an integer. If we were working with IEEE single-precision, |
| rounding errors could kill us. Finding worst cases in IEEE double-precision |
| requires better-than-double-precision log() functions, and Tim didn't bother. |
| Instead the code checks to see whether the allocated space is enough as each |
| new Python digit is added, and copies the whole thing to a larger long if not. |
| This should happen extremely rarely, and in fact I don't have a test case |
| that triggers it(!). Instead the code was tested by artificially allocating |
| just 1 digit at the start, so that the copying code was exercised for every |
| digit beyond the first. |
| ***/ |
| register twodigits c; /* current input character */ |
| Py_ssize_t size_z; |
| int i; |
| int convwidth; |
| twodigits convmultmax, convmult; |
| digit *pz, *pzstop; |
| char* scan; |
| |
| static double log_base_BASE[37] = {0.0e0,}; |
| static int convwidth_base[37] = {0,}; |
| static twodigits convmultmax_base[37] = {0,}; |
| |
| if (log_base_BASE[base] == 0.0) { |
| twodigits convmax = base; |
| int i = 1; |
| |
| log_base_BASE[base] = log((double)base) / |
| log((double)PyLong_BASE); |
| for (;;) { |
| twodigits next = convmax * base; |
| if (next > PyLong_BASE) |
| break; |
| convmax = next; |
| ++i; |
| } |
| convmultmax_base[base] = convmax; |
| assert(i > 0); |
| convwidth_base[base] = i; |
| } |
| |
| /* Find length of the string of numeric characters. */ |
| scan = str; |
| while (_PyLong_DigitValue[Py_CHARMASK(*scan)] < base) |
| ++scan; |
| |
| /* Create a long object that can contain the largest possible |
| * integer with this base and length. Note that there's no |
| * need to initialize z->ob_digit -- no slot is read up before |
| * being stored into. |
| */ |
| size_z = (Py_ssize_t)((scan - str) * log_base_BASE[base]) + 1; |
| /* Uncomment next line to test exceedingly rare copy code */ |
| /* size_z = 1; */ |
| assert(size_z > 0); |
| z = _PyLong_New(size_z); |
| if (z == NULL) |
| return NULL; |
| Py_SIZE(z) = 0; |
| |
| /* `convwidth` consecutive input digits are treated as a single |
| * digit in base `convmultmax`. |
| */ |
| convwidth = convwidth_base[base]; |
| convmultmax = convmultmax_base[base]; |
| |
| /* Work ;-) */ |
| while (str < scan) { |
| /* grab up to convwidth digits from the input string */ |
| c = (digit)_PyLong_DigitValue[Py_CHARMASK(*str++)]; |
| for (i = 1; i < convwidth && str != scan; ++i, ++str) { |
| c = (twodigits)(c * base + |
| _PyLong_DigitValue[Py_CHARMASK(*str)]); |
| assert(c < PyLong_BASE); |
| } |
| |
| convmult = convmultmax; |
| /* Calculate the shift only if we couldn't get |
| * convwidth digits. |
| */ |
| if (i != convwidth) { |
| convmult = base; |
| for ( ; i > 1; --i) |
| convmult *= base; |
| } |
| |
| /* Multiply z by convmult, and add c. */ |
| pz = z->ob_digit; |
| pzstop = pz + Py_SIZE(z); |
| for (; pz < pzstop; ++pz) { |
| c += (twodigits)*pz * convmult; |
| *pz = (digit)(c & PyLong_MASK); |
| c >>= PyLong_SHIFT; |
| } |
| /* carry off the current end? */ |
| if (c) { |
| assert(c < PyLong_BASE); |
| if (Py_SIZE(z) < size_z) { |
| *pz = (digit)c; |
| ++Py_SIZE(z); |
| } |
| else { |
| PyLongObject *tmp; |
| /* Extremely rare. Get more space. */ |
| assert(Py_SIZE(z) == size_z); |
| tmp = _PyLong_New(size_z + 1); |
| if (tmp == NULL) { |
| Py_DECREF(z); |
| return NULL; |
| } |
| memcpy(tmp->ob_digit, |
| z->ob_digit, |
| sizeof(digit) * size_z); |
| Py_DECREF(z); |
| z = tmp; |
| z->ob_digit[size_z] = (digit)c; |
| ++size_z; |
| } |
| } |
| } |
| } |
| if (z == NULL) |
| return NULL; |
| if (error_if_nonzero) { |
| /* reset the base to 0, else the exception message |
| doesn't make too much sense */ |
| base = 0; |
| if (Py_SIZE(z) != 0) |
| goto onError; |
| /* there might still be other problems, therefore base |
| remains zero here for the same reason */ |
| } |
| if (str == start) |
| goto onError; |
| if (sign < 0) |
| Py_SIZE(z) = -(Py_SIZE(z)); |
| if (*str == 'L' || *str == 'l') |
| str++; |
| while (*str && isspace(Py_CHARMASK(*str))) |
| str++; |
| if (*str != '\0') |
| goto onError; |
| if (pend) |
| *pend = str; |
| return (PyObject *) z; |
| |
| onError: |
| Py_XDECREF(z); |
| slen = strlen(orig_str) < 200 ? strlen(orig_str) : 200; |
| strobj = PyUnicode_FromStringAndSize(orig_str, slen); |
| if (strobj == NULL) |
| return NULL; |
| PyErr_Format(PyExc_ValueError, |
| "invalid literal for int() with base %d: %R", |
| base, strobj); |
| Py_DECREF(strobj); |
| return NULL; |
| } |
| |
| PyObject * |
| PyLong_FromUnicode(Py_UNICODE *u, Py_ssize_t length, int base) |
| { |
| PyObject *result; |
| char *buffer = (char *)PyMem_MALLOC(length+1); |
| |
| if (buffer == NULL) |
| return NULL; |
| |
| if (PyUnicode_EncodeDecimal(u, length, buffer, NULL)) { |
| PyMem_FREE(buffer); |
| return NULL; |
| } |
| result = PyLong_FromString(buffer, NULL, base); |
| PyMem_FREE(buffer); |
| return result; |
| } |
| |
| /* forward */ |
| static PyLongObject *x_divrem |
| (PyLongObject *, PyLongObject *, PyLongObject **); |
| static PyObject *long_long(PyObject *v); |
| static int long_divrem(PyLongObject *, PyLongObject *, |
| PyLongObject **, PyLongObject **); |
| |
| /* Long division with remainder, top-level routine */ |
| |
| static int |
| long_divrem(PyLongObject *a, PyLongObject *b, |
| PyLongObject **pdiv, PyLongObject **prem) |
| { |
| Py_ssize_t size_a = ABS(Py_SIZE(a)), size_b = ABS(Py_SIZE(b)); |
| PyLongObject *z; |
| |
| if (size_b == 0) { |
| PyErr_SetString(PyExc_ZeroDivisionError, |
| "integer division or modulo by zero"); |
| return -1; |
| } |
| if (size_a < size_b || |
| (size_a == size_b && |
| a->ob_digit[size_a-1] < b->ob_digit[size_b-1])) { |
| /* |a| < |b|. */ |
| *pdiv = (PyLongObject*)PyLong_FromLong(0); |
| if (*pdiv == NULL) |
| return -1; |
| Py_INCREF(a); |
| *prem = (PyLongObject *) a; |
| return 0; |
| } |
| if (size_b == 1) { |
| digit rem = 0; |
| z = divrem1(a, b->ob_digit[0], &rem); |
| if (z == NULL) |
| return -1; |
| *prem = (PyLongObject *) PyLong_FromLong((long)rem); |
| if (*prem == NULL) { |
| Py_DECREF(z); |
| return -1; |
| } |
| } |
| else { |
| z = x_divrem(a, b, prem); |
| if (z == NULL) |
| return -1; |
| } |
| /* Set the signs. |
| The quotient z has the sign of a*b; |
| the remainder r has the sign of a, |
| so a = b*z + r. */ |
| if ((Py_SIZE(a) < 0) != (Py_SIZE(b) < 0)) |
| NEGATE(z); |
| if (Py_SIZE(a) < 0 && Py_SIZE(*prem) != 0) |
| NEGATE(*prem); |
| *pdiv = z; |
| return 0; |
| } |
| |
| /* Unsigned long division with remainder -- the algorithm */ |
| |
| static PyLongObject * |
| x_divrem(PyLongObject *v1, PyLongObject *w1, PyLongObject **prem) |
| { |
| Py_ssize_t size_v = ABS(Py_SIZE(v1)), size_w = ABS(Py_SIZE(w1)); |
| digit d = (digit) ((twodigits)PyLong_BASE / (w1->ob_digit[size_w-1] + 1)); |
| PyLongObject *v = mul1(v1, d); |
| PyLongObject *w = mul1(w1, d); |
| PyLongObject *a; |
| Py_ssize_t j, k; |
| |
| if (v == NULL || w == NULL) { |
| Py_XDECREF(v); |
| Py_XDECREF(w); |
| return NULL; |
| } |
| |
| assert(size_v >= size_w && size_w > 1); /* Assert checks by div() */ |
| assert(Py_REFCNT(v) == 1); /* Since v will be used as accumulator! */ |
| assert(size_w == ABS(Py_SIZE(w))); /* That's how d was calculated */ |
| |
| size_v = ABS(Py_SIZE(v)); |
| k = size_v - size_w; |
| a = _PyLong_New(k + 1); |
| |
| for (j = size_v; a != NULL && k >= 0; --j, --k) { |
| digit vj = (j >= size_v) ? 0 : v->ob_digit[j]; |
| twodigits q; |
| stwodigits carry = 0; |
| int i; |
| |
| SIGCHECK({ |
| Py_DECREF(a); |
| a = NULL; |
| break; |
| }) |
| if (vj == w->ob_digit[size_w-1]) |
| q = PyLong_MASK; |
| else |
| q = (((twodigits)vj << PyLong_SHIFT) + v->ob_digit[j-1]) / |
| w->ob_digit[size_w-1]; |
| |
| while (w->ob_digit[size_w-2]*q > |
| (( |
| ((twodigits)vj << PyLong_SHIFT) |
| + v->ob_digit[j-1] |
| - q*w->ob_digit[size_w-1] |
| ) << PyLong_SHIFT) |
| + v->ob_digit[j-2]) |
| --q; |
| |
| for (i = 0; i < size_w && i+k < size_v; ++i) { |
| twodigits z = w->ob_digit[i] * q; |
| digit zz = (digit) (z >> PyLong_SHIFT); |
| carry += v->ob_digit[i+k] - z |
| + ((twodigits)zz << PyLong_SHIFT); |
| v->ob_digit[i+k] = (digit)(carry & PyLong_MASK); |
| carry = Py_ARITHMETIC_RIGHT_SHIFT(BASE_TWODIGITS_TYPE, |
| carry, PyLong_SHIFT); |
| carry -= zz; |
| } |
| |
| if (i+k < size_v) { |
| carry += v->ob_digit[i+k]; |
| v->ob_digit[i+k] = 0; |
| } |
| |
| if (carry == 0) |
| a->ob_digit[k] = (digit) q; |
| else { |
| assert(carry == -1); |
| a->ob_digit[k] = (digit) q-1; |
| carry = 0; |
| for (i = 0; i < size_w && i+k < size_v; ++i) { |
| carry += v->ob_digit[i+k] + w->ob_digit[i]; |
| v->ob_digit[i+k] = (digit)(carry & PyLong_MASK); |
| carry = Py_ARITHMETIC_RIGHT_SHIFT( |
| BASE_TWODIGITS_TYPE, |
| carry, PyLong_SHIFT); |
| } |
| } |
| } /* for j, k */ |
| |
| if (a == NULL) |
| *prem = NULL; |
| else { |
| a = long_normalize(a); |
| *prem = divrem1(v, d, &d); |
| /* d receives the (unused) remainder */ |
| if (*prem == NULL) { |
| Py_DECREF(a); |
| a = NULL; |
| } |
| } |
| Py_DECREF(v); |
| Py_DECREF(w); |
| return a; |
| } |
| |
| /* Methods */ |
| |
| static void |
| long_dealloc(PyObject *v) |
| { |
| Py_TYPE(v)->tp_free(v); |
| } |
| |
| static PyObject * |
| long_repr(PyObject *v) |
| { |
| return _PyLong_Format(v, 10); |
| } |
| |
| static int |
| long_compare(PyLongObject *a, PyLongObject *b) |
| { |
| Py_ssize_t sign; |
| |
| if (Py_SIZE(a) != Py_SIZE(b)) { |
| if (ABS(Py_SIZE(a)) == 0 && ABS(Py_SIZE(b)) == 0) |
| sign = 0; |
| else |
| sign = Py_SIZE(a) - Py_SIZE(b); |
| } |
| else { |
| Py_ssize_t i = ABS(Py_SIZE(a)); |
| while (--i >= 0 && a->ob_digit[i] == b->ob_digit[i]) |
| ; |
| if (i < 0) |
| sign = 0; |
| else { |
| sign = (int)a->ob_digit[i] - (int)b->ob_digit[i]; |
| if (Py_SIZE(a) < 0) |
| sign = -sign; |
| } |
| } |
| return sign < 0 ? -1 : sign > 0 ? 1 : 0; |
| } |
| |
| static PyObject * |
| long_richcompare(PyObject *self, PyObject *other, int op) |
| { |
| PyObject *result; |
| CHECK_BINOP(self, other); |
| result = Py_CmpToRich(op, long_compare((PyLongObject*)self, |
| (PyLongObject*)other)); |
| return result; |
| } |
| |
| static long |
| long_hash(PyLongObject *v) |
| { |
| long x; |
| Py_ssize_t i; |
| int sign; |
| |
| /* This is designed so that Python ints and longs with the |
| same value hash to the same value, otherwise comparisons |
| of mapping keys will turn out weird */ |
| i = Py_SIZE(v); |
| switch(i) { |
| case -1: return v->ob_digit[0]==1 ? -2 : -v->ob_digit[0]; |
| case 0: return 0; |
| case 1: return v->ob_digit[0]; |
| } |
| sign = 1; |
| x = 0; |
| if (i < 0) { |
| sign = -1; |
| i = -(i); |
| } |
| #define LONG_BIT_PyLong_SHIFT (8*sizeof(long) - PyLong_SHIFT) |
| /* The following loop produces a C long x such that (unsigned long)x |
| is congruent to the absolute value of v modulo ULONG_MAX. The |
| resulting x is nonzero if and only if v is. */ |
| while (--i >= 0) { |
| /* Force a native long #-bits (32 or 64) circular shift */ |
| x = ((x << PyLong_SHIFT) & ~PyLong_MASK) | ((x >> LONG_BIT_PyLong_SHIFT) & PyLong_MASK); |
| x += v->ob_digit[i]; |
| /* If the addition above overflowed (thinking of x as |
| unsigned), we compensate by incrementing. This preserves |
| the value modulo ULONG_MAX. */ |
| if ((unsigned long)x < v->ob_digit[i]) |
| x++; |
| } |
| #undef LONG_BIT_PyLong_SHIFT |
| x = x * sign; |
| if (x == -1) |
| x = -2; |
| return x; |
| } |
| |
| |
| /* Add the absolute values of two long integers. */ |
| |
| static PyLongObject * |
| x_add(PyLongObject *a, PyLongObject *b) |
| { |
| Py_ssize_t size_a = ABS(Py_SIZE(a)), size_b = ABS(Py_SIZE(b)); |
| PyLongObject *z; |
| int i; |
| digit carry = 0; |
| |
| /* Ensure a is the larger of the two: */ |
| if (size_a < size_b) { |
| { PyLongObject *temp = a; a = b; b = temp; } |
| { Py_ssize_t size_temp = size_a; |
| size_a = size_b; |
| size_b = size_temp; } |
| } |
| z = _PyLong_New(size_a+1); |
| if (z == NULL) |
| return NULL; |
| for (i = 0; i < size_b; ++i) { |
| carry += a->ob_digit[i] + b->ob_digit[i]; |
| z->ob_digit[i] = carry & PyLong_MASK; |
| carry >>= PyLong_SHIFT; |
| } |
| for (; i < size_a; ++i) { |
| carry += a->ob_digit[i]; |
| z->ob_digit[i] = carry & PyLong_MASK; |
| carry >>= PyLong_SHIFT; |
| } |
| z->ob_digit[i] = carry; |
| return long_normalize(z); |
| } |
| |
| /* Subtract the absolute values of two integers. */ |
| |
| static PyLongObject * |
| x_sub(PyLongObject *a, PyLongObject *b) |
| { |
| Py_ssize_t size_a = ABS(Py_SIZE(a)), size_b = ABS(Py_SIZE(b)); |
| PyLongObject *z; |
| Py_ssize_t i; |
| int sign = 1; |
| digit borrow = 0; |
| |
| /* Ensure a is the larger of the two: */ |
| if (size_a < size_b) { |
| sign = -1; |
| { PyLongObject *temp = a; a = b; b = temp; } |
| { Py_ssize_t size_temp = size_a; |
| size_a = size_b; |
| size_b = size_temp; } |
| } |
| else if (size_a == size_b) { |
| /* Find highest digit where a and b differ: */ |
| i = size_a; |
| while (--i >= 0 && a->ob_digit[i] == b->ob_digit[i]) |
| ; |
| if (i < 0) |
| return _PyLong_New(0); |
| if (a->ob_digit[i] < b->ob_digit[i]) { |
| sign = -1; |
| { PyLongObject *temp = a; a = b; b = temp; } |
| } |
| size_a = size_b = i+1; |
| } |
| z = _PyLong_New(size_a); |
| if (z == NULL) |
| return NULL; |
| for (i = 0; i < size_b; ++i) { |
| /* The following assumes unsigned arithmetic |
| works module 2**N for some N>PyLong_SHIFT. */ |
| borrow = a->ob_digit[i] - b->ob_digit[i] - borrow; |
| z->ob_digit[i] = borrow & PyLong_MASK; |
| borrow >>= PyLong_SHIFT; |
| borrow &= 1; /* Keep only one sign bit */ |
| } |
| for (; i < size_a; ++i) { |
| borrow = a->ob_digit[i] - borrow; |
| z->ob_digit[i] = borrow & PyLong_MASK; |
| borrow >>= PyLong_SHIFT; |
| borrow &= 1; /* Keep only one sign bit */ |
| } |
| assert(borrow == 0); |
| if (sign < 0) |
| NEGATE(z); |
| return long_normalize(z); |
| } |
| |
| static PyObject * |
| long_add(PyLongObject *a, PyLongObject *b) |
| { |
| PyLongObject *z; |
| |
| CHECK_BINOP(a, b); |
| |
| if (ABS(Py_SIZE(a)) <= 1 && ABS(Py_SIZE(b)) <= 1) { |
| PyObject *result = PyLong_FromLong(MEDIUM_VALUE(a) + |
| MEDIUM_VALUE(b)); |
| return result; |
| } |
| if (Py_SIZE(a) < 0) { |
| if (Py_SIZE(b) < 0) { |
| z = x_add(a, b); |
| if (z != NULL && Py_SIZE(z) != 0) |
| Py_SIZE(z) = -(Py_SIZE(z)); |
| } |
| else |
| z = x_sub(b, a); |
| } |
| else { |
| if (Py_SIZE(b) < 0) |
| z = x_sub(a, b); |
| else |
| z = x_add(a, b); |
| } |
| return (PyObject *)z; |
| } |
| |
| static PyObject * |
| long_sub(PyLongObject *a, PyLongObject *b) |
| { |
| PyLongObject *z; |
| |
| CHECK_BINOP(a, b); |
| |
| if (ABS(Py_SIZE(a)) <= 1 && ABS(Py_SIZE(b)) <= 1) { |
| PyObject* r; |
| r = PyLong_FromLong(MEDIUM_VALUE(a)-MEDIUM_VALUE(b)); |
| return r; |
| } |
| if (Py_SIZE(a) < 0) { |
| if (Py_SIZE(b) < 0) |
| z = x_sub(a, b); |
| else |
| z = x_add(a, b); |
| if (z != NULL && Py_SIZE(z) != 0) |
| Py_SIZE(z) = -(Py_SIZE(z)); |
| } |
| else { |
| if (Py_SIZE(b) < 0) |
| z = x_add(a, b); |
| else |
| z = x_sub(a, b); |
| } |
| return (PyObject *)z; |
| } |
| |
| /* Grade school multiplication, ignoring the signs. |
| * Returns the absolute value of the product, or NULL if error. |
| */ |
| static PyLongObject * |
| x_mul(PyLongObject *a, PyLongObject *b) |
| { |
| PyLongObject *z; |
| Py_ssize_t size_a = ABS(Py_SIZE(a)); |
| Py_ssize_t size_b = ABS(Py_SIZE(b)); |
| Py_ssize_t i; |
| |
| z = _PyLong_New(size_a + size_b); |
| if (z == NULL) |
| return NULL; |
| |
| memset(z->ob_digit, 0, Py_SIZE(z) * sizeof(digit)); |
| if (a == b) { |
| /* Efficient squaring per HAC, Algorithm 14.16: |
| * http://www.cacr.math.uwaterloo.ca/hac/about/chap14.pdf |
| * Gives slightly less than a 2x speedup when a == b, |
| * via exploiting that each entry in the multiplication |
| * pyramid appears twice (except for the size_a squares). |
| */ |
| for (i = 0; i < size_a; ++i) { |
| twodigits carry; |
| twodigits f = a->ob_digit[i]; |
| digit *pz = z->ob_digit + (i << 1); |
| digit *pa = a->ob_digit + i + 1; |
| digit *paend = a->ob_digit + size_a; |
| |
| SIGCHECK({ |
| Py_DECREF(z); |
| return NULL; |
| }) |
| |
| carry = *pz + f * f; |
| *pz++ = (digit)(carry & PyLong_MASK); |
| carry >>= PyLong_SHIFT; |
| assert(carry <= PyLong_MASK); |
| |
| /* Now f is added in twice in each column of the |
| * pyramid it appears. Same as adding f<<1 once. |
| */ |
| f <<= 1; |
| while (pa < paend) { |
| carry += *pz + *pa++ * f; |
| *pz++ = (digit)(carry & PyLong_MASK); |
| carry >>= PyLong_SHIFT; |
| assert(carry <= (PyLong_MASK << 1)); |
| } |
| if (carry) { |
| carry += *pz; |
| *pz++ = (digit)(carry & PyLong_MASK); |
| carry >>= PyLong_SHIFT; |
| } |
| if (carry) |
| *pz += (digit)(carry & PyLong_MASK); |
| assert((carry >> PyLong_SHIFT) == 0); |
| } |
| } |
| else { /* a is not the same as b -- gradeschool long mult */ |
| for (i = 0; i < size_a; ++i) { |
| twodigits carry = 0; |
| twodigits f = a->ob_digit[i]; |
| digit *pz = z->ob_digit + i; |
| digit *pb = b->ob_digit; |
| digit *pbend = b->ob_digit + size_b; |
| |
| SIGCHECK({ |
| Py_DECREF(z); |
| return NULL; |
| }) |
| |
| while (pb < pbend) { |
| carry += *pz + *pb++ * f; |
| *pz++ = (digit)(carry & PyLong_MASK); |
| carry >>= PyLong_SHIFT; |
| assert(carry <= PyLong_MASK); |
| } |
| if (carry) |
| *pz += (digit)(carry & PyLong_MASK); |
| assert((carry >> PyLong_SHIFT) == 0); |
| } |
| } |
| return long_normalize(z); |
| } |
| |
| /* A helper for Karatsuba multiplication (k_mul). |
| Takes a long "n" and an integer "size" representing the place to |
| split, and sets low and high such that abs(n) == (high << size) + low, |
| viewing the shift as being by digits. The sign bit is ignored, and |
| the return values are >= 0. |
| Returns 0 on success, -1 on failure. |
| */ |
| static int |
| kmul_split(PyLongObject *n, Py_ssize_t size, PyLongObject **high, PyLongObject **low) |
| { |
| PyLongObject *hi, *lo; |
| Py_ssize_t size_lo, size_hi; |
| const Py_ssize_t size_n = ABS(Py_SIZE(n)); |
| |
| size_lo = MIN(size_n, size); |
| size_hi = size_n - size_lo; |
| |
| if ((hi = _PyLong_New(size_hi)) == NULL) |
| return -1; |
| if ((lo = _PyLong_New(size_lo)) == NULL) { |
| Py_DECREF(hi); |
| return -1; |
| } |
| |
| memcpy(lo->ob_digit, n->ob_digit, size_lo * sizeof(digit)); |
| memcpy(hi->ob_digit, n->ob_digit + size_lo, size_hi * sizeof(digit)); |
| |
| *high = long_normalize(hi); |
| *low = long_normalize(lo); |
| return 0; |
| } |
| |
| static PyLongObject *k_lopsided_mul(PyLongObject *a, PyLongObject *b); |
| |
| /* Karatsuba multiplication. Ignores the input signs, and returns the |
| * absolute value of the product (or NULL if error). |
| * See Knuth Vol. 2 Chapter 4.3.3 (Pp. 294-295). |
| */ |
| static PyLongObject * |
| k_mul(PyLongObject *a, PyLongObject *b) |
| { |
| Py_ssize_t asize = ABS(Py_SIZE(a)); |
| Py_ssize_t bsize = ABS(Py_SIZE(b)); |
| PyLongObject *ah = NULL; |
| PyLongObject *al = NULL; |
| PyLongObject *bh = NULL; |
| PyLongObject *bl = NULL; |
| PyLongObject *ret = NULL; |
| PyLongObject *t1, *t2, *t3; |
| Py_ssize_t shift; /* the number of digits we split off */ |
| Py_ssize_t i; |
| |
| /* (ah*X+al)(bh*X+bl) = ah*bh*X*X + (ah*bl + al*bh)*X + al*bl |
| * Let k = (ah+al)*(bh+bl) = ah*bl + al*bh + ah*bh + al*bl |
| * Then the original product is |
| * ah*bh*X*X + (k - ah*bh - al*bl)*X + al*bl |
| * By picking X to be a power of 2, "*X" is just shifting, and it's |
| * been reduced to 3 multiplies on numbers half the size. |
| */ |
| |
| /* We want to split based on the larger number; fiddle so that b |
| * is largest. |
| */ |
| if (asize > bsize) { |
| t1 = a; |
| a = b; |
| b = t1; |
| |
| i = asize; |
| asize = bsize; |
| bsize = i; |
| } |
| |
| /* Use gradeschool math when either number is too small. */ |
| i = a == b ? KARATSUBA_SQUARE_CUTOFF : KARATSUBA_CUTOFF; |
| if (asize <= i) { |
| if (asize == 0) |
| return _PyLong_New(0); |
| else |
| return x_mul(a, b); |
| } |
| |
| /* If a is small compared to b, splitting on b gives a degenerate |
| * case with ah==0, and Karatsuba may be (even much) less efficient |
| * than "grade school" then. However, we can still win, by viewing |
| * b as a string of "big digits", each of width a->ob_size. That |
| * leads to a sequence of balanced calls to k_mul. |
| */ |
| if (2 * asize <= bsize) |
| return k_lopsided_mul(a, b); |
| |
| /* Split a & b into hi & lo pieces. */ |
| shift = bsize >> 1; |
| if (kmul_split(a, shift, &ah, &al) < 0) goto fail; |
| assert(Py_SIZE(ah) > 0); /* the split isn't degenerate */ |
| |
| if (a == b) { |
| bh = ah; |
| bl = al; |
| Py_INCREF(bh); |
| Py_INCREF(bl); |
| } |
| else if (kmul_split(b, shift, &bh, &bl) < 0) goto fail; |
| |
| /* The plan: |
| * 1. Allocate result space (asize + bsize digits: that's always |
| * enough). |
| * 2. Compute ah*bh, and copy into result at 2*shift. |
| * 3. Compute al*bl, and copy into result at 0. Note that this |
| * can't overlap with #2. |
| * 4. Subtract al*bl from the result, starting at shift. This may |
| * underflow (borrow out of the high digit), but we don't care: |
| * we're effectively doing unsigned arithmetic mod |
| * BASE**(sizea + sizeb), and so long as the *final* result fits, |
| * borrows and carries out of the high digit can be ignored. |
| * 5. Subtract ah*bh from the result, starting at shift. |
| * 6. Compute (ah+al)*(bh+bl), and add it into the result starting |
| * at shift. |
| */ |
| |
| /* 1. Allocate result space. */ |
| ret = _PyLong_New(asize + bsize); |
| if (ret == NULL) goto fail; |
| #ifdef Py_DEBUG |
| /* Fill with trash, to catch reference to uninitialized digits. */ |
| memset(ret->ob_digit, 0xDF, Py_SIZE(ret) * sizeof(digit)); |
| #endif |
| |
| /* 2. t1 <- ah*bh, and copy into high digits of result. */ |
| if ((t1 = k_mul(ah, bh)) == NULL) goto fail; |
| assert(Py_SIZE(t1) >= 0); |
| assert(2*shift + Py_SIZE(t1) <= Py_SIZE(ret)); |
| memcpy(ret->ob_digit + 2*shift, t1->ob_digit, |
| Py_SIZE(t1) * sizeof(digit)); |
| |
| /* Zero-out the digits higher than the ah*bh copy. */ |
| i = Py_SIZE(ret) - 2*shift - Py_SIZE(t1); |
| if (i) |
| memset(ret->ob_digit + 2*shift + Py_SIZE(t1), 0, |
| i * sizeof(digit)); |
| |
| /* 3. t2 <- al*bl, and copy into the low digits. */ |
| if ((t2 = k_mul(al, bl)) == NULL) { |
| Py_DECREF(t1); |
| goto fail; |
| } |
| assert(Py_SIZE(t2) >= 0); |
| assert(Py_SIZE(t2) <= 2*shift); /* no overlap with high digits */ |
| memcpy(ret->ob_digit, t2->ob_digit, Py_SIZE(t2) * sizeof(digit)); |
| |
| /* Zero out remaining digits. */ |
| i = 2*shift - Py_SIZE(t2); /* number of uninitialized digits */ |
| if (i) |
| memset(ret->ob_digit + Py_SIZE(t2), 0, i * sizeof(digit)); |
| |
| /* 4 & 5. Subtract ah*bh (t1) and al*bl (t2). We do al*bl first |
| * because it's fresher in cache. |
| */ |
| i = Py_SIZE(ret) - shift; /* # digits after shift */ |
| (void)v_isub(ret->ob_digit + shift, i, t2->ob_digit, Py_SIZE(t2)); |
| Py_DECREF(t2); |
| |
| (void)v_isub(ret->ob_digit + shift, i, t1->ob_digit, Py_SIZE(t1)); |
| Py_DECREF(t1); |
| |
| /* 6. t3 <- (ah+al)(bh+bl), and add into result. */ |
| if ((t1 = x_add(ah, al)) == NULL) goto fail; |
| Py_DECREF(ah); |
| Py_DECREF(al); |
| ah = al = NULL; |
| |
| if (a == b) { |
| t2 = t1; |
| Py_INCREF(t2); |
| } |
| else if ((t2 = x_add(bh, bl)) == NULL) { |
| Py_DECREF(t1); |
| goto fail; |
| } |
| Py_DECREF(bh); |
| Py_DECREF(bl); |
| bh = bl = NULL; |
| |
| t3 = k_mul(t1, t2); |
| Py_DECREF(t1); |
| Py_DECREF(t2); |
| if (t3 == NULL) goto fail; |
| assert(Py_SIZE(t3) >= 0); |
| |
| /* Add t3. It's not obvious why we can't run out of room here. |
| * See the (*) comment after this function. |
| */ |
| (void)v_iadd(ret->ob_digit + shift, i, t3->ob_digit, Py_SIZE(t3)); |
| Py_DECREF(t3); |
| |
| return long_normalize(ret); |
| |
| fail: |
| Py_XDECREF(ret); |
| Py_XDECREF(ah); |
| Py_XDECREF(al); |
| Py_XDECREF(bh); |
| Py_XDECREF(bl); |
| return NULL; |
| } |
| |
| /* (*) Why adding t3 can't "run out of room" above. |
| |
| Let f(x) mean the floor of x and c(x) mean the ceiling of x. Some facts |
| to start with: |
| |
| 1. For any integer i, i = c(i/2) + f(i/2). In particular, |
| bsize = c(bsize/2) + f(bsize/2). |
| 2. shift = f(bsize/2) |
| 3. asize <= bsize |
| 4. Since we call k_lopsided_mul if asize*2 <= bsize, asize*2 > bsize in this |
| routine, so asize > bsize/2 >= f(bsize/2) in this routine. |
| |
| We allocated asize + bsize result digits, and add t3 into them at an offset |
| of shift. This leaves asize+bsize-shift allocated digit positions for t3 |
| to fit into, = (by #1 and #2) asize + f(bsize/2) + c(bsize/2) - f(bsize/2) = |
| asize + c(bsize/2) available digit positions. |
| |
| bh has c(bsize/2) digits, and bl at most f(size/2) digits. So bh+hl has |
| at most c(bsize/2) digits + 1 bit. |
| |
| If asize == bsize, ah has c(bsize/2) digits, else ah has at most f(bsize/2) |
| digits, and al has at most f(bsize/2) digits in any case. So ah+al has at |
| most (asize == bsize ? c(bsize/2) : f(bsize/2)) digits + 1 bit. |
| |
| The product (ah+al)*(bh+bl) therefore has at most |
| |
| c(bsize/2) + (asize == bsize ? c(bsize/2) : f(bsize/2)) digits + 2 bits |
| |
| and we have asize + c(bsize/2) available digit positions. We need to show |
| this is always enough. An instance of c(bsize/2) cancels out in both, so |
| the question reduces to whether asize digits is enough to hold |
| (asize == bsize ? c(bsize/2) : f(bsize/2)) digits + 2 bits. If asize < bsize, |
| then we're asking whether asize digits >= f(bsize/2) digits + 2 bits. By #4, |
| asize is at least f(bsize/2)+1 digits, so this in turn reduces to whether 1 |
| digit is enough to hold 2 bits. This is so since PyLong_SHIFT=15 >= 2. If |
| asize == bsize, then we're asking whether bsize digits is enough to hold |
| c(bsize/2) digits + 2 bits, or equivalently (by #1) whether f(bsize/2) digits |
| is enough to hold 2 bits. This is so if bsize >= 2, which holds because |
| bsize >= KARATSUBA_CUTOFF >= 2. |
| |
| Note that since there's always enough room for (ah+al)*(bh+bl), and that's |
| clearly >= each of ah*bh and al*bl, there's always enough room to subtract |
| ah*bh and al*bl too. |
| */ |
| |
| /* b has at least twice the digits of a, and a is big enough that Karatsuba |
| * would pay off *if* the inputs had balanced sizes. View b as a sequence |
| * of slices, each with a->ob_size digits, and multiply the slices by a, |
| * one at a time. This gives k_mul balanced inputs to work with, and is |
| * also cache-friendly (we compute one double-width slice of the result |
| * at a time, then move on, never bactracking except for the helpful |
| * single-width slice overlap between successive partial sums). |
| */ |
| static PyLongObject * |
| k_lopsided_mul(PyLongObject *a, PyLongObject *b) |
| { |
| const Py_ssize_t asize = ABS(Py_SIZE(a)); |
| Py_ssize_t bsize = ABS(Py_SIZE(b)); |
| Py_ssize_t nbdone; /* # of b digits already multiplied */ |
| PyLongObject *ret; |
| PyLongObject *bslice = NULL; |
| |
| assert(asize > KARATSUBA_CUTOFF); |
| assert(2 * asize <= bsize); |
| |
| /* Allocate result space, and zero it out. */ |
| ret = _PyLong_New(asize + bsize); |
| if (ret == NULL) |
| return NULL; |
| memset(ret->ob_digit, 0, Py_SIZE(ret) * sizeof(digit)); |
| |
| /* Successive slices of b are copied into bslice. */ |
| bslice = _PyLong_New(asize); |
| if (bslice == NULL) |
| goto fail; |
| |
| nbdone = 0; |
| while (bsize > 0) { |
| PyLongObject *product; |
| const Py_ssize_t nbtouse = MIN(bsize, asize); |
| |
| /* Multiply the next slice of b by a. */ |
| memcpy(bslice->ob_digit, b->ob_digit + nbdone, |
| nbtouse * sizeof(digit)); |
| Py_SIZE(bslice) = nbtouse; |
| product = k_mul(a, bslice); |
| if (product == NULL) |
| goto fail; |
| |
| /* Add into result. */ |
| (void)v_iadd(ret->ob_digit + nbdone, Py_SIZE(ret) - nbdone, |
| product->ob_digit, Py_SIZE(product)); |
| Py_DECREF(product); |
| |
| bsize -= nbtouse; |
| nbdone += nbtouse; |
| } |
| |
| Py_DECREF(bslice); |
| return long_normalize(ret); |
| |
| fail: |
| Py_DECREF(ret); |
| Py_XDECREF(bslice); |
| return NULL; |
| } |
| |
| static PyObject * |
| long_mul(PyLongObject *a, PyLongObject *b) |
| { |
| PyLongObject *z; |
| |
| CHECK_BINOP(a, b); |
| |
| if (ABS(Py_SIZE(a)) <= 1 && ABS(Py_SIZE(b)) <= 1) { |
| PyObject *r; |
| r = PyLong_FromLong(MEDIUM_VALUE(a)*MEDIUM_VALUE(b)); |
| return r; |
| } |
| |
| z = k_mul(a, b); |
| /* Negate if exactly one of the inputs is negative. */ |
| if (((Py_SIZE(a) ^ Py_SIZE(b)) < 0) && z) |
| NEGATE(z); |
| return (PyObject *)z; |
| } |
| |
| /* The / and % operators are now defined in terms of divmod(). |
| The expression a mod b has the value a - b*floor(a/b). |
| The long_divrem function gives the remainder after division of |
| |a| by |b|, with the sign of a. This is also expressed |
| as a - b*trunc(a/b), if trunc truncates towards zero. |
| Some examples: |
| a b a rem b a mod b |
| 13 10 3 3 |
| -13 10 -3 7 |
| 13 -10 3 -7 |
| -13 -10 -3 -3 |
| So, to get from rem to mod, we have to add b if a and b |
| have different signs. We then subtract one from the 'div' |
| part of the outcome to keep the invariant intact. */ |
| |
| /* Compute |
| * *pdiv, *pmod = divmod(v, w) |
| * NULL can be passed for pdiv or pmod, in which case that part of |
| * the result is simply thrown away. The caller owns a reference to |
| * each of these it requests (does not pass NULL for). |
| */ |
| static int |
| l_divmod(PyLongObject *v, PyLongObject *w, |
| PyLongObject **pdiv, PyLongObject **pmod) |
| { |
| PyLongObject *div, *mod; |
| |
| if (long_divrem(v, w, &div, &mod) < 0) |
| return -1; |
| if ((Py_SIZE(mod) < 0 && Py_SIZE(w) > 0) || |
| (Py_SIZE(mod) > 0 && Py_SIZE(w) < 0)) { |
| PyLongObject *temp; |
| PyLongObject *one; |
| temp = (PyLongObject *) long_add(mod, w); |
| Py_DECREF(mod); |
| mod = temp; |
| if (mod == NULL) { |
| Py_DECREF(div); |
| return -1; |
| } |
| one = (PyLongObject *) PyLong_FromLong(1L); |
| if (one == NULL || |
| (temp = (PyLongObject *) long_sub(div, one)) == NULL) { |
| Py_DECREF(mod); |
| Py_DECREF(div); |
| Py_XDECREF(one); |
| return -1; |
| } |
| Py_DECREF(one); |
| Py_DECREF(div); |
| div = temp; |
| } |
| if (pdiv != NULL) |
| *pdiv = div; |
| else |
| Py_DECREF(div); |
| |
| if (pmod != NULL) |
| *pmod = mod; |
| else |
| Py_DECREF(mod); |
| |
| return 0; |
| } |
| |
| static PyObject * |
| long_div(PyObject *a, PyObject *b) |
| { |
| PyLongObject *div; |
| |
| CHECK_BINOP(a, b); |
| if (l_divmod((PyLongObject*)a, (PyLongObject*)b, &div, NULL) < 0) |
| div = NULL; |
| return (PyObject *)div; |
| } |
| |
| static PyObject * |
| long_true_divide(PyObject *a, PyObject *b) |
| { |
| double ad, bd; |
| int failed, aexp = -1, bexp = -1; |
| |
| CHECK_BINOP(a, b); |
| ad = _PyLong_AsScaledDouble((PyObject *)a, &aexp); |
| bd = _PyLong_AsScaledDouble((PyObject *)b, &bexp); |
| failed = (ad == -1.0 || bd == -1.0) && PyErr_Occurred(); |
| if (failed) |
| return NULL; |
| /* 'aexp' and 'bexp' were initialized to -1 to silence gcc-4.0.x, |
| but should really be set correctly after sucessful calls to |
| _PyLong_AsScaledDouble() */ |
| assert(aexp >= 0 && bexp >= 0); |
| |
| if (bd == 0.0) { |
| PyErr_SetString(PyExc_ZeroDivisionError, |
| "int division or modulo by zero"); |
| return NULL; |
| } |
| |
| /* True value is very close to ad/bd * 2**(PyLong_SHIFT*(aexp-bexp)) */ |
| ad /= bd; /* overflow/underflow impossible here */ |
| aexp -= bexp; |
| if (aexp > INT_MAX / PyLong_SHIFT) |
| goto overflow; |
| else if (aexp < -(INT_MAX / PyLong_SHIFT)) |
| return PyFloat_FromDouble(0.0); /* underflow to 0 */ |
| errno = 0; |
| ad = ldexp(ad, aexp * PyLong_SHIFT); |
| if (Py_OVERFLOWED(ad)) /* ignore underflow to 0.0 */ |
| goto overflow; |
| return PyFloat_FromDouble(ad); |
| |
| overflow: |
| PyErr_SetString(PyExc_OverflowError, |
| "int/int too large for a float"); |
| return NULL; |
| |
| } |
| |
| static PyObject * |
| long_mod(PyObject *a, PyObject *b) |
| { |
| PyLongObject *mod; |
| |
| CHECK_BINOP(a, b); |
| |
| if (l_divmod((PyLongObject*)a, (PyLongObject*)b, NULL, &mod) < 0) |
| mod = NULL; |
| return (PyObject *)mod; |
| } |
| |
| static PyObject * |
| long_divmod(PyObject *a, PyObject *b) |
| { |
| PyLongObject *div, *mod; |
| PyObject *z; |
| |
| CHECK_BINOP(a, b); |
| |
| if (l_divmod((PyLongObject*)a, (PyLongObject*)b, &div, &mod) < 0) { |
| return NULL; |
| } |
| z = PyTuple_New(2); |
| if (z != NULL) { |
| PyTuple_SetItem(z, 0, (PyObject *) div); |
| PyTuple_SetItem(z, 1, (PyObject *) mod); |
| } |
| else { |
| Py_DECREF(div); |
| Py_DECREF(mod); |
| } |
| return z; |
| } |
| |
| /* pow(v, w, x) */ |
| static PyObject * |
| long_pow(PyObject *v, PyObject *w, PyObject *x) |
| { |
| PyLongObject *a, *b, *c; /* a,b,c = v,w,x */ |
| int negativeOutput = 0; /* if x<0 return negative output */ |
| |
| PyLongObject *z = NULL; /* accumulated result */ |
| Py_ssize_t i, j, k; /* counters */ |
| PyLongObject *temp = NULL; |
| |
| /* 5-ary values. If the exponent is large enough, table is |
| * precomputed so that table[i] == a**i % c for i in range(32). |
| */ |
| PyLongObject *table[32] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, |
| 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; |
| |
| /* a, b, c = v, w, x */ |
| CHECK_BINOP(v, w); |
| a = (PyLongObject*)v; Py_INCREF(a); |
| b = (PyLongObject*)w; Py_INCREF(b); |
| if (PyLong_Check(x)) { |
| c = (PyLongObject *)x; |
| Py_INCREF(x); |
| } |
| else if (x == Py_None) |
| c = NULL; |
| else { |
| Py_DECREF(a); |
| Py_DECREF(b); |
| Py_INCREF(Py_NotImplemented); |
| return Py_NotImplemented; |
| } |
| |
| if (Py_SIZE(b) < 0) { /* if exponent is negative */ |
| if (c) { |
| PyErr_SetString(PyExc_TypeError, "pow() 2nd argument " |
| "cannot be negative when 3rd argument specified"); |
| goto Error; |
| } |
| else { |
| /* else return a float. This works because we know |
| that this calls float_pow() which converts its |
| arguments to double. */ |
| Py_DECREF(a); |
| Py_DECREF(b); |
| return PyFloat_Type.tp_as_number->nb_power(v, w, x); |
| } |
| } |
| |
| if (c) { |
| /* if modulus == 0: |
| raise ValueError() */ |
| if (Py_SIZE(c) == 0) { |
| PyErr_SetString(PyExc_ValueError, |
| "pow() 3rd argument cannot be 0"); |
| goto Error; |
| } |
| |
| /* if modulus < 0: |
| negativeOutput = True |
| modulus = -modulus */ |
| if (Py_SIZE(c) < 0) { |
| negativeOutput = 1; |
| temp = (PyLongObject *)_PyLong_Copy(c); |
| if (temp == NULL) |
| goto Error; |
| Py_DECREF(c); |
| c = temp; |
| temp = NULL; |
| NEGATE(c); |
| } |
| |
| /* if modulus == 1: |
| return 0 */ |
| if ((Py_SIZE(c) == 1) && (c->ob_digit[0] == 1)) { |
| z = (PyLongObject *)PyLong_FromLong(0L); |
| goto Done; |
| } |
| |
| /* if base < 0: |
| base = base % modulus |
| Having the base positive just makes things easier. */ |
| if (Py_SIZE(a) < 0) { |
| if (l_divmod(a, c, NULL, &temp) < 0) |
| goto Error; |
| Py_DECREF(a); |
| a = temp; |
| temp = NULL; |
| } |
| } |
| |
| /* At this point a, b, and c are guaranteed non-negative UNLESS |
| c is NULL, in which case a may be negative. */ |
| |
| z = (PyLongObject *)PyLong_FromLong(1L); |
| if (z == NULL) |
| goto Error; |
| |
| /* Perform a modular reduction, X = X % c, but leave X alone if c |
| * is NULL. |
| */ |
| #define REDUCE(X) \ |
| if (c != NULL) { \ |
| if (l_divmod(X, c, NULL, &temp) < 0) \ |
| goto Error; \ |
| Py_XDECREF(X); \ |
| X = temp; \ |
| temp = NULL; \ |
| } |
| |
| /* Multiply two values, then reduce the result: |
| result = X*Y % c. If c is NULL, skip the mod. */ |
| #define MULT(X, Y, result) \ |
| { \ |
| temp = (PyLongObject *)long_mul(X, Y); \ |
| if (temp == NULL) \ |
| goto Error; \ |
| Py_XDECREF(result); \ |
| result = temp; \ |
| temp = NULL; \ |
| REDUCE(result) \ |
| } |
| |
| if (Py_SIZE(b) <= FIVEARY_CUTOFF) { |
| /* Left-to-right binary exponentiation (HAC Algorithm 14.79) */ |
| /* http://www.cacr.math.uwaterloo.ca/hac/about/chap14.pdf */ |
| for (i = Py_SIZE(b) - 1; i >= 0; --i) { |
| digit bi = b->ob_digit[i]; |
| |
| for (j = 1 << (PyLong_SHIFT-1); j != 0; j >>= 1) { |
| MULT(z, z, z) |
| if (bi & j) |
| MULT(z, a, z) |
| } |
| } |
| } |
| else { |
| /* Left-to-right 5-ary exponentiation (HAC Algorithm 14.82) */ |
| Py_INCREF(z); /* still holds 1L */ |
| table[0] = z; |
| for (i = 1; i < 32; ++i) |
| MULT(table[i-1], a, table[i]) |
| |
| for (i = Py_SIZE(b) - 1; i >= 0; --i) { |
| const digit bi = b->ob_digit[i]; |
| |
| for (j = PyLong_SHIFT - 5; j >= 0; j -= 5) { |
| const int index = (bi >> j) & 0x1f; |
| for (k = 0; k < 5; ++k) |
| MULT(z, z, z) |
| if (index) |
| MULT(z, table[index], z) |
| } |
| } |
| } |
| |
| if (negativeOutput && (Py_SIZE(z) != 0)) { |
| temp = (PyLongObject *)long_sub(z, c); |
| if (temp == NULL) |
| goto Error; |
| Py_DECREF(z); |
| z = temp; |
| temp = NULL; |
| } |
| goto Done; |
| |
| Error: |
| if (z != NULL) { |
| Py_DECREF(z); |
| z = NULL; |
| } |
| /* fall through */ |
| Done: |
| if (Py_SIZE(b) > FIVEARY_CUTOFF) { |
| for (i = 0; i < 32; ++i) |
| Py_XDECREF(table[i]); |
| } |
| Py_DECREF(a); |
| Py_DECREF(b); |
| Py_XDECREF(c); |
| Py_XDECREF(temp); |
| return (PyObject *)z; |
| } |
| |
| static PyObject * |
| long_invert(PyLongObject *v) |
| { |
| /* Implement ~x as -(x+1) */ |
| PyLongObject *x; |
| PyLongObject *w; |
| if (ABS(Py_SIZE(v)) <=1) |
| return PyLong_FromLong(-(MEDIUM_VALUE(v)+1)); |
| w = (PyLongObject *)PyLong_FromLong(1L); |
| if (w == NULL) |
| return NULL; |
| x = (PyLongObject *) long_add(v, w); |
| Py_DECREF(w); |
| if (x == NULL) |
| return NULL; |
| Py_SIZE(x) = -(Py_SIZE(x)); |
| return (PyObject *)x; |
| } |
| |
| static PyObject * |
| long_neg(PyLongObject *v) |
| { |
| PyLongObject *z; |
| if (ABS(Py_SIZE(v)) <= 1) |
| return PyLong_FromLong(-MEDIUM_VALUE(v)); |
| z = (PyLongObject *)_PyLong_Copy(v); |
| if (z != NULL) |
| Py_SIZE(z) = -(Py_SIZE(v)); |
| return (PyObject *)z; |
| } |
| |
| static PyObject * |
| long_abs(PyLongObject *v) |
| { |
| if (Py_SIZE(v) < 0) |
| return long_neg(v); |
| else |
| return long_long((PyObject *)v); |
| } |
| |
| static int |
| long_bool(PyLongObject *v) |
| { |
| return ABS(Py_SIZE(v)) != 0; |
| } |
| |
| static PyObject * |
| long_rshift(PyLongObject *a, PyLongObject *b) |
| { |
| PyLongObject *z = NULL; |
| long shiftby; |
| Py_ssize_t newsize, wordshift, loshift, hishift, i, j; |
| digit lomask, himask; |
| |
| CHECK_BINOP(a, b); |
| |
| if (Py_SIZE(a) < 0) { |
| /* Right shifting negative numbers is harder */ |
| PyLongObject *a1, *a2; |
| a1 = (PyLongObject *) long_invert(a); |
| if (a1 == NULL) |
| goto rshift_error; |
| a2 = (PyLongObject *) long_rshift(a1, b); |
| Py_DECREF(a1); |
| if (a2 == NULL) |
| goto rshift_error; |
| z = (PyLongObject *) long_invert(a2); |
| Py_DECREF(a2); |
| } |
| else { |
| |
| shiftby = PyLong_AsLong((PyObject *)b); |
| if (shiftby == -1L && PyErr_Occurred()) |
| goto rshift_error; |
| if (shiftby < 0) { |
| PyErr_SetString(PyExc_ValueError, |
| "negative shift count"); |
| goto rshift_error; |
| } |
| wordshift = shiftby / PyLong_SHIFT; |
| newsize = ABS(Py_SIZE(a)) - wordshift; |
| if (newsize <= 0) { |
| z = _PyLong_New(0); |
| return (PyObject *)z; |
| } |
| loshift = shiftby % PyLong_SHIFT; |
| hishift = PyLong_SHIFT - loshift; |
| lomask = ((digit)1 << hishift) - 1; |
| himask = PyLong_MASK ^ lomask; |
| z = _PyLong_New(newsize); |
| if (z == NULL) |
| goto rshift_error; |
| if (Py_SIZE(a) < 0) |
| Py_SIZE(z) = -(Py_SIZE(z)); |
| for (i = 0, j = wordshift; i < newsize; i++, j++) { |
| z->ob_digit[i] = (a->ob_digit[j] >> loshift) & lomask; |
| if (i+1 < newsize) |
| z->ob_digit[i] |= |
| (a->ob_digit[j+1] << hishift) & himask; |
| } |
| z = long_normalize(z); |
| } |
| rshift_error: |
| return (PyObject *) z; |
| |
| } |
| |
| static PyObject * |
| long_lshift(PyObject *v, PyObject *w) |
| { |
| /* This version due to Tim Peters */ |
| PyLongObject *a = (PyLongObject*)v; |
| PyLongObject *b = (PyLongObject*)w; |
| PyLongObject *z = NULL; |
| long shiftby; |
| Py_ssize_t oldsize, newsize, wordshift, remshift, i, j; |
| twodigits accum; |
| |
| CHECK_BINOP(a, b); |
| |
| shiftby = PyLong_AsLong((PyObject *)b); |
| if (shiftby == -1L && PyErr_Occurred()) |
| goto lshift_error; |
| if (shiftby < 0) { |
| PyErr_SetString(PyExc_ValueError, "negative shift count"); |
| goto lshift_error; |
| } |
| if ((long)(int)shiftby != shiftby) { |
| PyErr_SetString(PyExc_ValueError, |
| "outrageous left shift count"); |
| goto lshift_error; |
| } |
| /* wordshift, remshift = divmod(shiftby, PyLong_SHIFT) */ |
| wordshift = (int)shiftby / PyLong_SHIFT; |
| remshift = (int)shiftby - wordshift * PyLong_SHIFT; |
| |
| oldsize = ABS(Py_SIZE(a)); |
| newsize = oldsize + wordshift; |
| if (remshift) |
| ++newsize; |
| z = _PyLong_New(newsize); |
| if (z == NULL) |
| goto lshift_error; |
| if (Py_SIZE(a) < 0) |
| NEGATE(z); |
| for (i = 0; i < wordshift; i++) |
| z->ob_digit[i] = 0; |
| accum = 0; |
| for (i = wordshift, j = 0; j < oldsize; i++, j++) { |
| accum |= (twodigits)a->ob_digit[j] << remshift; |
| z->ob_digit[i] = (digit)(accum & PyLong_MASK); |
| accum >>= PyLong_SHIFT; |
| } |
| if (remshift) |
| z->ob_digit[newsize-1] = (digit)accum; |
| else |
| assert(!accum); |
| z = long_normalize(z); |
| lshift_error: |
| return (PyObject *) z; |
| } |
| |
| |
| /* Bitwise and/xor/or operations */ |
| |
| static PyObject * |
| long_bitwise(PyLongObject *a, |
| int op, /* '&', '|', '^' */ |
| PyLongObject *b) |
| { |
| digit maska, maskb; /* 0 or PyLong_MASK */ |
| int negz; |
| Py_ssize_t size_a, size_b, size_z; |
| PyLongObject *z; |
| int i; |
| digit diga, digb; |
| PyObject *v; |
| |
| if (Py_SIZE(a) < 0) { |
| a = (PyLongObject *) long_invert(a); |
| if (a == NULL) |
| return NULL; |
| maska = PyLong_MASK; |
| } |
| else { |
| Py_INCREF(a); |
| maska = 0; |
| } |
| if (Py_SIZE(b) < 0) { |
| b = (PyLongObject *) long_invert(b); |
| if (b == NULL) { |
| Py_DECREF(a); |
| return NULL; |
| } |
| maskb = PyLong_MASK; |
| } |
| else { |
| Py_INCREF(b); |
| maskb = 0; |
| } |
| |
| negz = 0; |
| switch (op) { |
| case '^': |
| if (maska != maskb) { |
| maska ^= PyLong_MASK; |
| negz = -1; |
| } |
| break; |
| case '&': |
| if (maska && maskb) { |
| op = '|'; |
| maska ^= PyLong_MASK; |
| maskb ^= PyLong_MASK; |
| negz = -1; |
| } |
| break; |
| case '|': |
| if (maska || maskb) { |
| op = '&'; |
| maska ^= PyLong_MASK; |
| maskb ^= PyLong_MASK; |
| negz = -1; |
| } |
| break; |
| } |
| |
| /* JRH: The original logic here was to allocate the result value (z) |
| as the longer of the two operands. However, there are some cases |
| where the result is guaranteed to be shorter than that: AND of two |
| positives, OR of two negatives: use the shorter number. AND with |
| mixed signs: use the positive number. OR with mixed signs: use the |
| negative number. After the transformations above, op will be '&' |
| iff one of these cases applies, and mask will be non-0 for operands |
| whose length should be ignored. |
| */ |
| |
| size_a = Py_SIZE(a); |
| size_b = Py_SIZE(b); |
| size_z = op == '&' |
| ? (maska |
| ? size_b |
| : (maskb ? size_a : MIN(size_a, size_b))) |
| : MAX(size_a, size_b); |
| z = _PyLong_New(size_z); |
| if (z == NULL) { |
| Py_DECREF(a); |
| Py_DECREF(b); |
| return NULL; |
| } |
| |
| for (i = 0; i < size_z; ++i) { |
| diga = (i < size_a ? a->ob_digit[i] : 0) ^ maska; |
| digb = (i < size_b ? b->ob_digit[i] : 0) ^ maskb; |
| switch (op) { |
| case '&': z->ob_digit[i] = diga & digb; break; |
| case '|': z->ob_digit[i] = diga | digb; break; |
| case '^': z->ob_digit[i] = diga ^ digb; break; |
| } |
| } |
| |
| Py_DECREF(a); |
| Py_DECREF(b); |
| z = long_normalize(z); |
| if (negz == 0) |
| return (PyObject *) z; |
| v = long_invert(z); |
| Py_DECREF(z); |
| return v; |
| } |
| |
| static PyObject * |
| long_and(PyObject *a, PyObject *b) |
| { |
| PyObject *c; |
| CHECK_BINOP(a, b); |
| c = long_bitwise((PyLongObject*)a, '&', (PyLongObject*)b); |
| return c; |
| } |
| |
| static PyObject * |
| long_xor(PyObject *a, PyObject *b) |
| { |
| PyObject *c; |
| CHECK_BINOP(a, b); |
| c = long_bitwise((PyLongObject*)a, '^', (PyLongObject*)b); |
| return c; |
| } |
| |
| static PyObject * |
| long_or(PyObject *a, PyObject *b) |
| { |
| PyObject *c; |
| CHECK_BINOP(a, b); |
| c = long_bitwise((PyLongObject*)a, '|', (PyLongObject*)b); |
| return c; |
| } |
| |
| static PyObject * |
| long_long(PyObject *v) |
| { |
| if (PyLong_CheckExact(v)) |
| Py_INCREF(v); |
| else |
| v = _PyLong_Copy((PyLongObject *)v); |
| return v; |
| } |
| |
| static PyObject * |
| long_float(PyObject *v) |
| { |
| double result; |
| result = PyLong_AsDouble(v); |
| if (result == -1.0 && PyErr_Occurred()) |
| return NULL; |
| return PyFloat_FromDouble(result); |
| } |
| |
| static PyObject * |
| long_subtype_new(PyTypeObject *type, PyObject *args, PyObject *kwds); |
| |
| static PyObject * |
| long_new(PyTypeObject *type, PyObject *args, PyObject *kwds) |
| { |
| PyObject *x = NULL; |
| int base = -909; /* unlikely! */ |
| static char *kwlist[] = {"x", "base", 0}; |
| |
| if (type != &PyLong_Type) |
| return long_subtype_new(type, args, kwds); /* Wimp out */ |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, "|Oi:int", kwlist, |
| &x, &base)) |
| return NULL; |
| if (x == NULL) |
| return PyLong_FromLong(0L); |
| if (base == -909) |
| return PyNumber_Long(x); |
| else if (PyUnicode_Check(x)) |
| return PyLong_FromUnicode(PyUnicode_AS_UNICODE(x), |
| PyUnicode_GET_SIZE(x), |
| base); |
| else if (PyBytes_Check(x) || PyString_Check(x)) { |
| /* Since PyLong_FromString doesn't have a length parameter, |
| * check here for possible NULs in the string. */ |
| char *string; |
| int size = Py_SIZE(x); |
| if (PyBytes_Check(x)) |
| string = PyBytes_AS_STRING(x); |
| else |
| string = PyString_AS_STRING(x); |
| if (strlen(string) != size) { |
| /* We only see this if there's a null byte in x, |
| x is a bytes or buffer, *and* a base is given. */ |
| PyErr_Format(PyExc_ValueError, |
| "invalid literal for int() with base %d: %R", |
| base, x); |
| return NULL; |
| } |
| return PyLong_FromString(string, NULL, base); |
| } |
| else { |
| PyErr_SetString(PyExc_TypeError, |
| "int() can't convert non-string with explicit base"); |
| return NULL; |
| } |
| } |
| |
| /* Wimpy, slow approach to tp_new calls for subtypes of long: |
| first create a regular long from whatever arguments we got, |
| then allocate a subtype instance and initialize it from |
| the regular long. The regular long is then thrown away. |
| */ |
| static PyObject * |
| long_subtype_new(PyTypeObject *type, PyObject *args, PyObject *kwds) |
| { |
| PyLongObject *tmp, *newobj; |
| Py_ssize_t i, n; |
| |
| assert(PyType_IsSubtype(type, &PyLong_Type)); |
| tmp = (PyLongObject *)long_new(&PyLong_Type, args, kwds); |
| if (tmp == NULL) |
| return NULL; |
| assert(PyLong_CheckExact(tmp)); |
| n = Py_SIZE(tmp); |
| if (n < 0) |
| n = -n; |
| newobj = (PyLongObject *)type->tp_alloc(type, n); |
| if (newobj == NULL) { |
| Py_DECREF(tmp); |
| return NULL; |
| } |
| assert(PyLong_Check(newobj)); |
| Py_SIZE(newobj) = Py_SIZE(tmp); |
| for (i = 0; i < n; i++) |
| newobj->ob_digit[i] = tmp->ob_digit[i]; |
| Py_DECREF(tmp); |
| return (PyObject *)newobj; |
| } |
| |
| static PyObject * |
| long_getnewargs(PyLongObject *v) |
| { |
| return Py_BuildValue("(N)", _PyLong_Copy(v)); |
| } |
| |
| static PyObject * |
| long_getN(PyLongObject *v, void *context) { |
| return PyLong_FromLong((Py_intptr_t)context); |
| } |
| |
| static PyObject * |
| long__format__(PyObject *self, PyObject *args) |
| { |
| /* when back porting this to 2.6, check type of the format_spec |
| and call either unicode_long__format__ or |
| string_long__format__ */ |
| return unicode_long__format__(self, args); |
| } |
| |
| |
| static PyObject * |
| long_round(PyObject *self, PyObject *args) |
| { |
| #define UNDEF_NDIGITS (-0x7fffffff) /* Unlikely ndigits value */ |
| int ndigits = UNDEF_NDIGITS; |
| double x; |
| PyObject *res; |
| |
| if (!PyArg_ParseTuple(args, "|i", &ndigits)) |
| return NULL; |
| |
| if (ndigits == UNDEF_NDIGITS) |
| return long_long(self); |
| |
| /* If called with two args, defer to float.__round__(). */ |
| x = PyLong_AsDouble(self); |
| if (x == -1.0 && PyErr_Occurred()) |
| return NULL; |
| self = PyFloat_FromDouble(x); |
| if (self == NULL) |
| return NULL; |
| res = PyObject_CallMethod(self, "__round__", "i", ndigits); |
| Py_DECREF(self); |
| return res; |
| #undef UNDEF_NDIGITS |
| } |
| |
| static PyMethodDef long_methods[] = { |
| {"conjugate", (PyCFunction)long_long, METH_NOARGS, |
| "Returns self, the complex conjugate of any int."}, |
| {"__trunc__", (PyCFunction)long_long, METH_NOARGS, |
| "Truncating an Integral returns itself."}, |
| {"__floor__", (PyCFunction)long_long, METH_NOARGS, |
| "Flooring an Integral returns itself."}, |
| {"__ceil__", (PyCFunction)long_long, METH_NOARGS, |
| "Ceiling of an Integral returns itself."}, |
| {"__round__", (PyCFunction)long_round, METH_VARARGS, |
| "Rounding an Integral returns itself.\n" |
| "Rounding with an ndigits arguments defers to float.__round__."}, |
| {"__getnewargs__", (PyCFunction)long_getnewargs, METH_NOARGS}, |
| {"__format__", (PyCFunction)long__format__, METH_VARARGS}, |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| static PyGetSetDef long_getset[] = { |
| {"real", |
| (getter)long_long, (setter)NULL, |
| "the real part of a complex number", |
| NULL}, |
| {"imag", |
| (getter)long_getN, (setter)NULL, |
| "the imaginary part of a complex number", |
| (void*)0}, |
| {"numerator", |
| (getter)long_long, (setter)NULL, |
| "the numerator of a rational number in lowest terms", |
| NULL}, |
| {"denominator", |
| (getter)long_getN, (setter)NULL, |
| "the denominator of a rational number in lowest terms", |
| (void*)1}, |
| {NULL} /* Sentinel */ |
| }; |
| |
| PyDoc_STRVAR(long_doc, |
| "int(x[, base]) -> integer\n\ |
| \n\ |
| Convert a string or number to an integer, if possible. A floating\n\ |
| point argument will be truncated towards zero (this does not include a\n\ |
| string representation of a floating point number!) When converting a\n\ |
| string, use the optional base. It is an error to supply a base when\n\ |
| converting a non-string."); |
| |
| static PyNumberMethods long_as_number = { |
| (binaryfunc) long_add, /*nb_add*/ |
| (binaryfunc) long_sub, /*nb_subtract*/ |
| (binaryfunc) long_mul, /*nb_multiply*/ |
| long_mod, /*nb_remainder*/ |
| long_divmod, /*nb_divmod*/ |
| long_pow, /*nb_power*/ |
| (unaryfunc) long_neg, /*nb_negative*/ |
| (unaryfunc) long_long, /*tp_positive*/ |
| (unaryfunc) long_abs, /*tp_absolute*/ |
| (inquiry) long_bool, /*tp_bool*/ |
| (unaryfunc) long_invert, /*nb_invert*/ |
| long_lshift, /*nb_lshift*/ |
| (binaryfunc) long_rshift, /*nb_rshift*/ |
| long_and, /*nb_and*/ |
| long_xor, /*nb_xor*/ |
| long_or, /*nb_or*/ |
| 0, /*nb_reserved*/ |
| long_long, /*nb_int*/ |
| long_long, /*nb_long*/ |
| long_float, /*nb_float*/ |
| 0, /*nb_oct*/ /* not used */ |
| 0, /*nb_hex*/ /* not used */ |
| 0, /* nb_inplace_add */ |
| 0, /* nb_inplace_subtract */ |
| 0, /* nb_inplace_multiply */ |
| 0, /* nb_inplace_remainder */ |
| 0, /* nb_inplace_power */ |
| 0, /* nb_inplace_lshift */ |
| 0, /* nb_inplace_rshift */ |
| 0, /* nb_inplace_and */ |
| 0, /* nb_inplace_xor */ |
| 0, /* nb_inplace_or */ |
| long_div, /* nb_floor_divide */ |
| long_true_divide, /* nb_true_divide */ |
| 0, /* nb_inplace_floor_divide */ |
| 0, /* nb_inplace_true_divide */ |
| long_long, /* nb_index */ |
| }; |
| |
| PyTypeObject PyLong_Type = { |
| PyVarObject_HEAD_INIT(&PyType_Type, 0) |
| "int", /* tp_name */ |
| /* See _PyLong_New for why this isn't |
| sizeof(PyLongObject) - sizeof(digit) */ |
| sizeof(PyVarObject), /* tp_basicsize */ |
| sizeof(digit), /* tp_itemsize */ |
| long_dealloc, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_compare */ |
| long_repr, /* tp_repr */ |
| &long_as_number, /* tp_as_number */ |
| 0, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| (hashfunc)long_hash, /* tp_hash */ |
| 0, /* tp_call */ |
| long_repr, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | |
| Py_TPFLAGS_LONG_SUBCLASS, /* tp_flags */ |
| long_doc, /* tp_doc */ |
| 0, /* tp_traverse */ |
| 0, /* tp_clear */ |
| long_richcompare, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset */ |
| 0, /* tp_iter */ |
| 0, /* tp_iternext */ |
| long_methods, /* tp_methods */ |
| 0, /* tp_members */ |
| long_getset, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| 0, /* tp_dictoffset */ |
| 0, /* tp_init */ |
| 0, /* tp_alloc */ |
| long_new, /* tp_new */ |
| PyObject_Del, /* tp_free */ |
| }; |
| |
| int |
| _PyLong_Init(void) |
| { |
| #if NSMALLNEGINTS + NSMALLPOSINTS > 0 |
| int ival; |
| PyLongObject *v = small_ints; |
| for (ival = -NSMALLNEGINTS; ival < 0; ival++, v++) { |
| PyObject_INIT(v, &PyLong_Type); |
| Py_SIZE(v) = -1; |
| v->ob_digit[0] = -ival; |
| } |
| for (; ival < NSMALLPOSINTS; ival++, v++) { |
| PyObject_INIT(v, &PyLong_Type); |
| Py_SIZE(v) = ival ? 1 : 0; |
| v->ob_digit[0] = ival; |
| } |
| #endif |
| return 1; |
| } |
| |
| void |
| PyLong_Fini(void) |
| { |
| #if 0 |
| int i; |
| /* This is currently not needed; the small integers |
| are statically allocated */ |
| #if NSMALLNEGINTS + NSMALLPOSINTS > 0 |
| PyIntObject **q; |
| |
| i = NSMALLNEGINTS + NSMALLPOSINTS; |
| q = small_ints; |
| while (--i >= 0) { |
| Py_XDECREF(*q); |
| *q++ = NULL; |
| } |
| #endif |
| #endif |
| } |