| # The file Setup is used by the makesetup script to construct the files |
| # Makefile and config.c, from Makefile.pre and config.c.in, |
| # respectively. The file Setup itself is initially copied from |
| # Setup.in; once it exists it will not be overwritten, so you can edit |
| # Setup to your heart's content. One possibility is to overwrite it |
| # with a copy of Setup.sgi or Setup.sunos[45] before you start editing. |
| # Note that Makefile.pre is created from Makefile.pre.in by the toplevel |
| # configure script. |
| |
| # (VPATH notes: Setup and Makefile.pre are in the build directory, as |
| # are Makefile and config.c; Setup.in and config.c.in are in the source |
| # directory.) |
| |
| # Each line in this file describes one or more optional modules. |
| # Comment out lines to suppress modules. |
| # Lines have the following structure: |
| # |
| # <module> ... [<objectfile> ...] [<cpparg> ...] [<library> ...] |
| # |
| # <objectfile> is anything ending in .o |
| # <cpparg> is anything starting with -I, -D, -U or -C |
| # <library> is anything ending in .a or beginning with -l or -L |
| # <module> is anything else but should be a valid Python |
| # identifier (letters, digits, underscores, beginning with non-digit) |
| # |
| # Lines can also have the form |
| # |
| # <name> = <value> |
| # |
| # which defines a Make variable definition inserted into Makefile.in |
| |
| # NOTE: As a standard policy, as many modules as can be supported by a |
| # platform should be present. The distribution comes with all modules |
| # enabled that are supported by most platforms and don't require you |
| # to ftp sources from elsewhere. To make this easier for SGI |
| # platforms, you can copy Setup.sgi to Setup (or edit Makefile.in.in |
| # to use Setup.sgi instead of Setup). |
| |
| |
| # Some special rules to define PYTHONPATH. |
| # Edit the definitions below to indicate which options you are using. |
| # Don't add any whitespace or comments! |
| |
| # Don't edit this (usually) |
| DESTLIB=$(prefix)/lib/python |
| |
| # Standard enabled (tests are always available) |
| TESTPATH=:$(DESTLIB)/test |
| |
| # Enable this for SGI systems |
| #ARCHPATH=:$(DESTLIB)/sgi |
| |
| # Enable this for Sun systems |
| #ARCHPATH=:$(DESTLIB)/sun4 |
| |
| # Enable this if stdwin installed |
| #STDWINPATH=:$(DESTLIB)/stdwin |
| |
| PYTHONPATH=.:$(DESTLIB)$(TESTPATH)$(ARCHPATH)$(STDWINPATH) |
| |
| |
| # Modules that should always be present (non UNIX dependent) |
| |
| array arraymodule.o # array objects |
| math mathmodule.o # math library functions, e.g. sin() |
| parser parsermodule.o # raw interface to the Python parser |
| posix posixmodule.o # posix (UNIX) system calls |
| regex regexmodule.o regexpr.o # Regular expressions, GNU Emacs style |
| strop stropmodule.o # fast string operations implemented in C |
| struct structmodule.o # binary structure packing/unpacking |
| time timemodule.o # time operations and variables |
| |
| |
| # Modules with some UNIX dependencies -- on by default. |
| # (If you have a really backward UNIX, select and socket may not be |
| # supported...) |
| |
| fcntl fcntlmodule.o # fcntl(2) and ioctl(2) |
| pwd pwdmodule.o # pwd(3) |
| grp grpmodule.o # grp(3) |
| crypt cryptmodule.o # crypt(3) |
| select selectmodule.o # select(2); not on ancient System V |
| socket socketmodule.o # socket(2); not on ancient System V |
| |
| |
| # Some more UNIX dependent modules -- off by default, since these |
| # are not supported by all UNIX systems. |
| |
| #dbm dbmmodule.o # dbm(3) may require -lndbm or similar |
| #nis nismodule.o # Sun yellow pages -- not everywhere |
| |
| |
| # Multimedia modules -- on by default. |
| # These represent audio samples or images as strings |
| |
| audioop audioop.o # Operations on audio samples |
| imageop imageop.o # Operations on images |
| rgbimg rgbimgmodule.o # Read SGI RGB image files (but coded portably) |
| |
| |
| # The stdwin module provides a simple, portable (between X11 and Mac) |
| # windowing interface. You need to ftp the STDWIN library, e.g. from |
| # ftp://ftp.cwi.nl/pub/stdwin. The STDWIN variable must point to the |
| # STDWIN toplevel directory. The ARCH variable must be set to the |
| # architecture identifier used to build STDWIN. NB if you combine this |
| # with the gl module on an SGI machine, you should replace "-lX11" with |
| # "-lX11_s". |
| |
| #STDWIN=/ufs/guido/src/stdwin |
| #ARCH=??? |
| #stdwin stdwinmodule.o -I$(STDWIN)/H $(STDWIN)/Build/$(ARCH)/x11/lib/lib.a -lX11 |
| |
| |
| # The md5 module implements the RSA Data Security, Inc. MD5 |
| # Message-Digest Algorithm, described in RFC 1321. The necessary files |
| # md5c.c and md5.h are included here. |
| |
| md5 md5module.o md5c.o |
| |
| |
| # The mpz module interfaces to the GNU Multiple Precision library. |
| # You need to ftp the GNU MP library. |
| # The GMP variable must point to the GMP source directory. |
| # This was originally written and tested against GMP 1.2. I have |
| # compiled it against GMP 1.3.2 (the latest I believe) and it seems to |
| # work OK, but I haven't tested it thoroughly (lacking knowledge about |
| # it). |
| |
| #GMP=/ufs/guido/src/gmp |
| #mpz mpzmodule.o -I$(GMP) $(GMP)/libgmp.a |
| |
| |
| # The rotor module (contributed by Lance Ellinghouse) implements a |
| # rotor-based encryption algorithm. It is self-contained. |
| |
| rotor rotormodule.o |
| |
| |
| # SGI IRIX specific modules -- off by default. |
| # Switch this on if you have an SGI machine. |
| # Note that some required libraries and header files aren't always |
| # installed; you may be better off switching on only 'fm' and 'gl' |
| # (Font Manager and Graphics Library). |
| |
| # # ADD THESE FOR IRIX5: |
| #al almodule.o -laudio |
| #cd cdmodule.o -lcdaudio -lds # -lmediad |
| #cl clmodule.o -lcl # -lawareaudio |
| #fm fmmodule.o -lfm_s -lgl_s |
| #gl glmodule.o -lgl_s -lX11_s |
| #imgfile imgfile.o -limage -lgutil |
| #sgi sgimodule.o |
| #sv svmodule.o yuvconvert.o -lsvideo -lXext -lX11_s |
| |
| # The FORMS library, by Mark Overmars, implements user interface |
| # components such as dialogs and buttons using SGI's GL and FM |
| # libraries. You must ftp the FORMS library separately from |
| # ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a. |
| # The FORMS variable must point to the FORMS subdirectory of the forms |
| # toplevel directory. |
| |
| #FORMS=/ufs/guido/src/forms/FORMS |
| #fl flmodule.o -I$(FORMS) $(FORMS)/libforms.a |
| |
| |
| # SunOS specific modules -- off by default |
| |
| # sunaudiodev sunaudiodev.o |
| |
| |
| # Thread module -- works on SGI IRIX and on SunOS 5.x (SOLARIS) only. |
| # Note that you must have configured (and built!) Python with the |
| # --with-thread option passed to the configure script for this to work. |
| |
| # thread threadmodule.o |
| |
| |
| # GNN's timing module |
| # timing timingmodule.o |
| |
| |
| # Lance Ellinghouse's signal module |
| # signal signalmodule.o |
| |
| |
| # Tommy Burnette's 'new' module (creates new empty objects of certain kinds) |
| # new newmodule.o |
| |
| |
| # John Redford's sybase module |
| # sybase sybasemodule.o |
| |
| |
| # Generic (SunOS / SVR4) dynamic loading module |
| # dl dlmodule.o |
| |
| |
| # Jack Jansen's imgformat module |
| # imgformat imgformat.o |
| |
| |
| # Lance Ellinghouse's syslog module |
| # syslog syslogmodule.o |
| |
| |
| # Example -- included for reference only |
| |
| # xx xxmodule.o |