diff --git a/Modules/binascii.c b/Modules/binascii.c
index db675f9..2d91b7f 100644
--- a/Modules/binascii.c
+++ b/Modules/binascii.c
@@ -3,40 +3,40 @@
 **
 ** This module currently supports the following encodings:
 ** uuencode:
-**     	each line encodes 45 bytes (except possibly the last)
-**	First char encodes (binary) length, rest data
-**	each char encodes 6 bits, as follows:
-**	binary: 01234567 abcdefgh ijklmnop
-**	ascii:  012345 67abcd efghij klmnop
-**	ASCII encoding method is "excess-space": 000000 is encoded as ' ', etc.
-**	short binary data is zero-extended (so the bits are always in the
-**	right place), this does *not* reflect in the length.
+**      each line encodes 45 bytes (except possibly the last)
+**      First char encodes (binary) length, rest data
+**      each char encodes 6 bits, as follows:
+**      binary: 01234567 abcdefgh ijklmnop
+**      ascii:  012345 67abcd efghij klmnop
+**      ASCII encoding method is "excess-space": 000000 is encoded as ' ', etc.
+**      short binary data is zero-extended (so the bits are always in the
+**      right place), this does *not* reflect in the length.
 ** base64:
 **      Line breaks are insignificant, but lines are at most 76 chars
 **      each char encodes 6 bits, in similar order as uucode/hqx. Encoding
 **      is done via a table.
 **      Short binary data is filled (in ASCII) with '='.
 ** hqx:
-**	File starts with introductory text, real data starts and ends
-**	with colons.
-**	Data consists of three similar parts: info, datafork, resourcefork.
-**	Each part is protected (at the end) with a 16-bit crc
-**	The binary data is run-length encoded, and then ascii-fied:
-**	binary: 01234567 abcdefgh ijklmnop
-**	ascii:  012345 67abcd efghij klmnop
-**	ASCII encoding is table-driven, see the code.
-**	Short binary data results in the runt ascii-byte being output with
-**	the bits in the right place.
+**      File starts with introductory text, real data starts and ends
+**      with colons.
+**      Data consists of three similar parts: info, datafork, resourcefork.
+**      Each part is protected (at the end) with a 16-bit crc
+**      The binary data is run-length encoded, and then ascii-fied:
+**      binary: 01234567 abcdefgh ijklmnop
+**      ascii:  012345 67abcd efghij klmnop
+**      ASCII encoding is table-driven, see the code.
+**      Short binary data results in the runt ascii-byte being output with
+**      the bits in the right place.
 **
 ** While I was reading dozens of programs that encode or decode the formats
 ** here (documentation? hihi:-) I have formulated Jansen's Observation:
 **
-**	Programs that encode binary data in ASCII are written in
-**	such a style that they are as unreadable as possible. Devices used
-**	include unnecessary global variables, burying important tables
-**	in unrelated sourcefiles, putting functions in include files,
-**	using seemingly-descriptive variable names for different purposes,
-**	calls to empty subroutines and a host of others.
+**      Programs that encode binary data in ASCII are written in
+**      such a style that they are as unreadable as possible. Devices used
+**      include unnecessary global variables, burying important tables
+**      in unrelated sourcefiles, putting functions in include files,
+**      using seemingly-descriptive variable names for different purposes,
+**      calls to empty subroutines and a host of others.
 **
 ** I have attempted to break with this tradition, but I guess that that
 ** does make the performance sub-optimal. Oh well, too bad...
@@ -75,67 +75,67 @@
 
 static unsigned char table_a2b_hqx[256] = {
 /*       ^@    ^A    ^B    ^C    ^D    ^E    ^F    ^G   */
-/* 0*/	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+/* 0*/  FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
 /*       \b    \t    \n    ^K    ^L    \r    ^N    ^O   */
-/* 1*/	FAIL, FAIL, SKIP, FAIL, FAIL, SKIP, FAIL, FAIL,
+/* 1*/  FAIL, FAIL, SKIP, FAIL, FAIL, SKIP, FAIL, FAIL,
 /*       ^P    ^Q    ^R    ^S    ^T    ^U    ^V    ^W   */
-/* 2*/	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+/* 2*/  FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
 /*       ^X    ^Y    ^Z    ^[    ^\    ^]    ^^    ^_   */
-/* 3*/	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+/* 3*/  FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
 /*              !     "     #     $     %     &     '   */
-/* 4*/	FAIL, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
+/* 4*/  FAIL, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
 /*        (     )     *     +     ,     -     .     /   */
-/* 5*/	0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, FAIL, FAIL,
+/* 5*/  0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, FAIL, FAIL,
 /*        0     1     2     3     4     5     6     7   */
-/* 6*/	0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13, FAIL,
+/* 6*/  0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13, FAIL,
 /*        8     9     :     ;     <     =     >     ?   */
-/* 7*/	0x14, 0x15, DONE, FAIL, FAIL, FAIL, FAIL, FAIL,
+/* 7*/  0x14, 0x15, DONE, FAIL, FAIL, FAIL, FAIL, FAIL,
 /*        @     A     B     C     D     E     F     G   */
-/* 8*/	0x16, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D,
+/* 8*/  0x16, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D,
 /*        H     I     J     K     L     M     N     O   */
-/* 9*/	0x1E, 0x1F, 0x20, 0x21, 0x22, 0x23, 0x24, FAIL,
+/* 9*/  0x1E, 0x1F, 0x20, 0x21, 0x22, 0x23, 0x24, FAIL,
 /*        P     Q     R     S     T     U     V     W   */
-/*10*/	0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, FAIL,
+/*10*/  0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, FAIL,
 /*        X     Y     Z     [     \     ]     ^     _   */
-/*11*/	0x2C, 0x2D, 0x2E, 0x2F, FAIL, FAIL, FAIL, FAIL,
+/*11*/  0x2C, 0x2D, 0x2E, 0x2F, FAIL, FAIL, FAIL, FAIL,
 /*        `     a     b     c     d     e     f     g   */
-/*12*/	0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, FAIL,
+/*12*/  0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, FAIL,
 /*        h     i     j     k     l     m     n     o   */
-/*13*/	0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, FAIL, FAIL,
+/*13*/  0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, FAIL, FAIL,
 /*        p     q     r     s     t     u     v     w   */
-/*14*/	0x3D, 0x3E, 0x3F, FAIL, FAIL, FAIL, FAIL, FAIL,
+/*14*/  0x3D, 0x3E, 0x3F, FAIL, FAIL, FAIL, FAIL, FAIL,
 /*        x     y     z     {     |     }     ~    ^?   */
-/*15*/	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-/*16*/	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
-	FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+/*15*/  FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+/*16*/  FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
+    FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL, FAIL,
 };
 
 static unsigned char table_b2a_hqx[] =
 "!\"#$%&'()*+,-012345689@ABCDEFGHIJKLMNPQRSTUVXYZ[`abcdefhijklmpqr";
 
 static char table_a2b_base64[] = {
-	-1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1,
-	-1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1,
-	-1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,62, -1,-1,-1,63,
-	52,53,54,55, 56,57,58,59, 60,61,-1,-1, -1, 0,-1,-1, /* Note PAD->0 */
-	-1, 0, 1, 2,  3, 4, 5, 6,  7, 8, 9,10, 11,12,13,14,
-	15,16,17,18, 19,20,21,22, 23,24,25,-1, -1,-1,-1,-1,
-	-1,26,27,28, 29,30,31,32, 33,34,35,36, 37,38,39,40,
-	41,42,43,44, 45,46,47,48, 49,50,51,-1, -1,-1,-1,-1
+    -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1,
+    -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1,
+    -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,62, -1,-1,-1,63,
+    52,53,54,55, 56,57,58,59, 60,61,-1,-1, -1, 0,-1,-1, /* Note PAD->0 */
+    -1, 0, 1, 2,  3, 4, 5, 6,  7, 8, 9,10, 11,12,13,14,
+    15,16,17,18, 19,20,21,22, 23,24,25,-1, -1,-1,-1,-1,
+    -1,26,27,28, 29,30,31,32, 33,34,35,36, 37,38,39,40,
+    41,42,43,44, 45,46,47,48, 49,50,51,-1, -1,-1,-1,-1
 };
 
 #define BASE64_PAD '='
@@ -149,38 +149,38 @@
 
 
 static unsigned short crctab_hqx[256] = {
-	0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
-	0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
-	0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
-	0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
-	0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
-	0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
-	0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
-	0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
-	0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
-	0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
-	0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
-	0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
-	0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
-	0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
-	0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
-	0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
-	0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
-	0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
-	0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
-	0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
-	0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
-	0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
-	0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
-	0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
-	0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
-	0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
-	0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
-	0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
-	0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
-	0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
-	0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
-	0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0,
+    0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
+    0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
+    0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
+    0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
+    0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
+    0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
+    0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
+    0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
+    0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
+    0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
+    0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
+    0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
+    0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
+    0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
+    0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
+    0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
+    0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
+    0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
+    0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
+    0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
+    0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
+    0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
+    0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
+    0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
+    0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
+    0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
+    0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
+    0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
+    0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
+    0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
+    0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
+    0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0,
 };
 
 PyDoc_STRVAR(doc_a2b_uu, "(ascii) -> bin. Decode a line of uuencoded data");
@@ -188,85 +188,85 @@
 static PyObject *
 binascii_a2b_uu(PyObject *self, PyObject *args)
 {
-	Py_buffer pascii;
-	unsigned char *ascii_data, *bin_data;
-	int leftbits = 0;
-	unsigned char this_ch;
-	unsigned int leftchar = 0;
-	PyObject *rv;
-	Py_ssize_t ascii_len, bin_len;
+    Py_buffer pascii;
+    unsigned char *ascii_data, *bin_data;
+    int leftbits = 0;
+    unsigned char this_ch;
+    unsigned int leftchar = 0;
+    PyObject *rv;
+    Py_ssize_t ascii_len, bin_len;
 
-	if ( !PyArg_ParseTuple(args, "s*:a2b_uu", &pascii) )
-		return NULL;
-	ascii_data = pascii.buf;
-	ascii_len = pascii.len;
+    if ( !PyArg_ParseTuple(args, "s*:a2b_uu", &pascii) )
+        return NULL;
+    ascii_data = pascii.buf;
+    ascii_len = pascii.len;
 
-	assert(ascii_len >= 0);
+    assert(ascii_len >= 0);
 
-	/* First byte: binary data length (in bytes) */
-	bin_len = (*ascii_data++ - ' ') & 077;
-	ascii_len--;
+    /* First byte: binary data length (in bytes) */
+    bin_len = (*ascii_data++ - ' ') & 077;
+    ascii_len--;
 
-	/* Allocate the buffer */
-	if ( (rv=PyString_FromStringAndSize(NULL, bin_len)) == NULL ) {
-		PyBuffer_Release(&pascii);
-		return NULL;
-	}
-	bin_data = (unsigned char *)PyString_AS_STRING(rv);
+    /* Allocate the buffer */
+    if ( (rv=PyString_FromStringAndSize(NULL, bin_len)) == NULL ) {
+        PyBuffer_Release(&pascii);
+        return NULL;
+    }
+    bin_data = (unsigned char *)PyString_AS_STRING(rv);
 
-	for( ; bin_len > 0 ; ascii_len--, ascii_data++ ) {
-		/* XXX is it really best to add NULs if there's no more data */
-		this_ch = (ascii_len > 0) ? *ascii_data : 0;
-		if ( this_ch == '\n' || this_ch == '\r' || ascii_len <= 0) {
-			/*
-			** Whitespace. Assume some spaces got eaten at
-			** end-of-line. (We check this later)
-			*/
-			this_ch = 0;
-	        } else {
-			/* Check the character for legality
-			** The 64 in stead of the expected 63 is because
-			** there are a few uuencodes out there that use
-			** '`' as zero instead of space.
-			*/
-			if ( this_ch < ' ' || this_ch > (' ' + 64)) {
-				PyErr_SetString(Error, "Illegal char");
-				PyBuffer_Release(&pascii);
-				Py_DECREF(rv);
-				return NULL;
-			}
-			this_ch = (this_ch - ' ') & 077;
-		}
-		/*
-		** Shift it in on the low end, and see if there's
-		** a byte ready for output.
-		*/
-		leftchar = (leftchar << 6) | (this_ch);
-		leftbits += 6;
-		if ( leftbits >= 8 ) {
-			leftbits -= 8;
-			*bin_data++ = (leftchar >> leftbits) & 0xff;
-			leftchar &= ((1 << leftbits) - 1);
-			bin_len--;
-		}
-	}
-	/*
-	** Finally, check that if there's anything left on the line
-	** that it's whitespace only.
-	*/
-	while( ascii_len-- > 0 ) {
-		this_ch = *ascii_data++;
-		/* Extra '`' may be written as padding in some cases */
-		if ( this_ch != ' ' && this_ch != ' '+64 &&
-		     this_ch != '\n' && this_ch != '\r' ) {
-			PyErr_SetString(Error, "Trailing garbage");
-			PyBuffer_Release(&pascii);
-			Py_DECREF(rv);
-			return NULL;
-		}
-	}
-	PyBuffer_Release(&pascii);
-	return rv;
+    for( ; bin_len > 0 ; ascii_len--, ascii_data++ ) {
+        /* XXX is it really best to add NULs if there's no more data */
+        this_ch = (ascii_len > 0) ? *ascii_data : 0;
+        if ( this_ch == '\n' || this_ch == '\r' || ascii_len <= 0) {
+            /*
+            ** Whitespace. Assume some spaces got eaten at
+            ** end-of-line. (We check this later)
+            */
+            this_ch = 0;
+        } else {
+            /* Check the character for legality
+            ** The 64 in stead of the expected 63 is because
+            ** there are a few uuencodes out there that use
+            ** '`' as zero instead of space.
+            */
+            if ( this_ch < ' ' || this_ch > (' ' + 64)) {
+                PyErr_SetString(Error, "Illegal char");
+                PyBuffer_Release(&pascii);
+                Py_DECREF(rv);
+                return NULL;
+            }
+            this_ch = (this_ch - ' ') & 077;
+        }
+        /*
+        ** Shift it in on the low end, and see if there's
+        ** a byte ready for output.
+        */
+        leftchar = (leftchar << 6) | (this_ch);
+        leftbits += 6;
+        if ( leftbits >= 8 ) {
+            leftbits -= 8;
+            *bin_data++ = (leftchar >> leftbits) & 0xff;
+            leftchar &= ((1 << leftbits) - 1);
+            bin_len--;
+        }
+    }
+    /*
+    ** Finally, check that if there's anything left on the line
+    ** that it's whitespace only.
+    */
+    while( ascii_len-- > 0 ) {
+        this_ch = *ascii_data++;
+        /* Extra '`' may be written as padding in some cases */
+        if ( this_ch != ' ' && this_ch != ' '+64 &&
+             this_ch != '\n' && this_ch != '\r' ) {
+            PyErr_SetString(Error, "Trailing garbage");
+            PyBuffer_Release(&pascii);
+            Py_DECREF(rv);
+            return NULL;
+        }
+    }
+    PyBuffer_Release(&pascii);
+    return rv;
 }
 
 PyDoc_STRVAR(doc_b2a_uu, "(bin) -> ascii. Uuencode line of data");
@@ -274,86 +274,86 @@
 static PyObject *
 binascii_b2a_uu(PyObject *self, PyObject *args)
 {
-	Py_buffer pbin;
-	unsigned char *ascii_data, *bin_data;
-	int leftbits = 0;
-	unsigned char this_ch;
-	unsigned int leftchar = 0;
-	PyObject *rv;
-	Py_ssize_t bin_len;
+    Py_buffer pbin;
+    unsigned char *ascii_data, *bin_data;
+    int leftbits = 0;
+    unsigned char this_ch;
+    unsigned int leftchar = 0;
+    PyObject *rv;
+    Py_ssize_t bin_len;
 
-	if ( !PyArg_ParseTuple(args, "s*:b2a_uu", &pbin) )
-		return NULL;
-	bin_data = pbin.buf;
-	bin_len = pbin.len;
-	if ( bin_len > 45 ) {
-		/* The 45 is a limit that appears in all uuencode's */
-		PyErr_SetString(Error, "At most 45 bytes at once");
-		PyBuffer_Release(&pbin);
-		return NULL;
-	}
+    if ( !PyArg_ParseTuple(args, "s*:b2a_uu", &pbin) )
+        return NULL;
+    bin_data = pbin.buf;
+    bin_len = pbin.len;
+    if ( bin_len > 45 ) {
+        /* The 45 is a limit that appears in all uuencode's */
+        PyErr_SetString(Error, "At most 45 bytes at once");
+        PyBuffer_Release(&pbin);
+        return NULL;
+    }
 
-	/* We're lazy and allocate to much (fixed up later) */
-	if ( (rv=PyString_FromStringAndSize(NULL, 2 + (bin_len+2)/3*4)) == NULL ) {
-		PyBuffer_Release(&pbin);
-		return NULL;
-	}
-	ascii_data = (unsigned char *)PyString_AS_STRING(rv);
+    /* We're lazy and allocate to much (fixed up later) */
+    if ( (rv=PyString_FromStringAndSize(NULL, 2 + (bin_len+2)/3*4)) == NULL ) {
+        PyBuffer_Release(&pbin);
+        return NULL;
+    }
+    ascii_data = (unsigned char *)PyString_AS_STRING(rv);
 
-	/* Store the length */
-	*ascii_data++ = ' ' + (bin_len & 077);
+    /* Store the length */
+    *ascii_data++ = ' ' + (bin_len & 077);
 
-	for( ; bin_len > 0 || leftbits != 0 ; bin_len--, bin_data++ ) {
-		/* Shift the data (or padding) into our buffer */
-		if ( bin_len > 0 )	/* Data */
-			leftchar = (leftchar << 8) | *bin_data;
-		else			/* Padding */
-			leftchar <<= 8;
-		leftbits += 8;
+    for( ; bin_len > 0 || leftbits != 0 ; bin_len--, bin_data++ ) {
+        /* Shift the data (or padding) into our buffer */
+        if ( bin_len > 0 )              /* Data */
+            leftchar = (leftchar << 8) | *bin_data;
+        else                            /* Padding */
+            leftchar <<= 8;
+        leftbits += 8;
 
-		/* See if there are 6-bit groups ready */
-		while ( leftbits >= 6 ) {
-			this_ch = (leftchar >> (leftbits-6)) & 0x3f;
-			leftbits -= 6;
-			*ascii_data++ = this_ch + ' ';
-		}
-	}
-	*ascii_data++ = '\n';	/* Append a courtesy newline */
+        /* See if there are 6-bit groups ready */
+        while ( leftbits >= 6 ) {
+            this_ch = (leftchar >> (leftbits-6)) & 0x3f;
+            leftbits -= 6;
+            *ascii_data++ = this_ch + ' ';
+        }
+    }
+    *ascii_data++ = '\n';       /* Append a courtesy newline */
 
-	if (_PyString_Resize(&rv,
-                           (ascii_data -
-                            (unsigned char *)PyString_AS_STRING(rv))) < 0) {
-		Py_DECREF(rv);
-		rv = NULL;
-	}
-	PyBuffer_Release(&pbin);
-	return rv;
+    if (_PyString_Resize(&rv,
+                       (ascii_data -
+                        (unsigned char *)PyString_AS_STRING(rv))) < 0) {
+        Py_DECREF(rv);
+        rv = NULL;
+    }
+    PyBuffer_Release(&pbin);
+    return rv;
 }
 
 
 static int
 binascii_find_valid(unsigned char *s, Py_ssize_t slen, int num)
 {
-	/* Finds & returns the (num+1)th
-	** valid character for base64, or -1 if none.
-	*/
+    /* Finds & returns the (num+1)th
+    ** valid character for base64, or -1 if none.
+    */
 
-	int ret = -1;
-	unsigned char c, b64val;
+    int ret = -1;
+    unsigned char c, b64val;
 
-	while ((slen > 0) && (ret == -1)) {
-		c = *s;
-		b64val = table_a2b_base64[c & 0x7f];
-		if ( ((c <= 0x7f) && (b64val != (unsigned char)-1)) ) {
-			if (num == 0)
-				ret = *s;
-			num--;
-		}
+    while ((slen > 0) && (ret == -1)) {
+        c = *s;
+        b64val = table_a2b_base64[c & 0x7f];
+        if ( ((c <= 0x7f) && (b64val != (unsigned char)-1)) ) {
+            if (num == 0)
+                ret = *s;
+            num--;
+        }
 
-		s++;
-		slen--;
-	}
-	return ret;
+        s++;
+        slen--;
+    }
+    return ret;
 }
 
 PyDoc_STRVAR(doc_a2b_base64, "(ascii) -> bin. Decode a line of base64 data");
@@ -361,108 +361,108 @@
 static PyObject *
 binascii_a2b_base64(PyObject *self, PyObject *args)
 {
-	Py_buffer pascii;
-	unsigned char *ascii_data, *bin_data;
-	int leftbits = 0;
-	unsigned char this_ch;
-	unsigned int leftchar = 0;
-	PyObject *rv;
-	Py_ssize_t ascii_len, bin_len;
-	int quad_pos = 0;
+    Py_buffer pascii;
+    unsigned char *ascii_data, *bin_data;
+    int leftbits = 0;
+    unsigned char this_ch;
+    unsigned int leftchar = 0;
+    PyObject *rv;
+    Py_ssize_t ascii_len, bin_len;
+    int quad_pos = 0;
 
-	if ( !PyArg_ParseTuple(args, "s*:a2b_base64", &pascii) )
-		return NULL;
-	ascii_data = pascii.buf;
-	ascii_len = pascii.len;
+    if ( !PyArg_ParseTuple(args, "s*:a2b_base64", &pascii) )
+        return NULL;
+    ascii_data = pascii.buf;
+    ascii_len = pascii.len;
 
-	assert(ascii_len >= 0);
+    assert(ascii_len >= 0);
 
-	if (ascii_len > PY_SSIZE_T_MAX - 3) {
-		PyBuffer_Release(&pascii);
-		return PyErr_NoMemory();
-	}
+    if (ascii_len > PY_SSIZE_T_MAX - 3) {
+        PyBuffer_Release(&pascii);
+        return PyErr_NoMemory();
+    }
 
-	bin_len = ((ascii_len+3)/4)*3; /* Upper bound, corrected later */
+    bin_len = ((ascii_len+3)/4)*3; /* Upper bound, corrected later */
 
-	/* Allocate the buffer */
-	if ( (rv=PyString_FromStringAndSize(NULL, bin_len)) == NULL ) {
-		PyBuffer_Release(&pascii);
-		return NULL;
-	}
-	bin_data = (unsigned char *)PyString_AS_STRING(rv);
-	bin_len = 0;
+    /* Allocate the buffer */
+    if ( (rv=PyString_FromStringAndSize(NULL, bin_len)) == NULL ) {
+        PyBuffer_Release(&pascii);
+        return NULL;
+    }
+    bin_data = (unsigned char *)PyString_AS_STRING(rv);
+    bin_len = 0;
 
-	for( ; ascii_len > 0; ascii_len--, ascii_data++) {
-		this_ch = *ascii_data;
+    for( ; ascii_len > 0; ascii_len--, ascii_data++) {
+        this_ch = *ascii_data;
 
-		if (this_ch > 0x7f ||
-		    this_ch == '\r' || this_ch == '\n' || this_ch == ' ')
-			continue;
+        if (this_ch > 0x7f ||
+            this_ch == '\r' || this_ch == '\n' || this_ch == ' ')
+            continue;
 
-		/* Check for pad sequences and ignore
-		** the invalid ones.
-		*/
-		if (this_ch == BASE64_PAD) {
-			if ( (quad_pos < 2) ||
-			     ((quad_pos == 2) &&
-			      (binascii_find_valid(ascii_data, ascii_len, 1)
-			       != BASE64_PAD)) )
-			{
-				continue;
-			}
-			else {
-				/* A pad sequence means no more input.
-				** We've already interpreted the data
-				** from the quad at this point.
-				*/
-				leftbits = 0;
-				break;
-			}
-		}
+        /* Check for pad sequences and ignore
+        ** the invalid ones.
+        */
+        if (this_ch == BASE64_PAD) {
+            if ( (quad_pos < 2) ||
+                 ((quad_pos == 2) &&
+                  (binascii_find_valid(ascii_data, ascii_len, 1)
+                   != BASE64_PAD)) )
+            {
+                continue;
+            }
+            else {
+                /* A pad sequence means no more input.
+                ** We've already interpreted the data
+                ** from the quad at this point.
+                */
+                leftbits = 0;
+                break;
+            }
+        }
 
-		this_ch = table_a2b_base64[*ascii_data];
-		if ( this_ch == (unsigned char) -1 )
-			continue;
+        this_ch = table_a2b_base64[*ascii_data];
+        if ( this_ch == (unsigned char) -1 )
+            continue;
 
-		/*
-		** Shift it in on the low end, and see if there's
-		** a byte ready for output.
-		*/
-		quad_pos = (quad_pos + 1) & 0x03;
-		leftchar = (leftchar << 6) | (this_ch);
-		leftbits += 6;
+        /*
+        ** Shift it in on the low end, and see if there's
+        ** a byte ready for output.
+        */
+        quad_pos = (quad_pos + 1) & 0x03;
+        leftchar = (leftchar << 6) | (this_ch);
+        leftbits += 6;
 
-		if ( leftbits >= 8 ) {
-			leftbits -= 8;
-			*bin_data++ = (leftchar >> leftbits) & 0xff;
-			bin_len++;
-			leftchar &= ((1 << leftbits) - 1);
-		}
- 	}
+        if ( leftbits >= 8 ) {
+            leftbits -= 8;
+            *bin_data++ = (leftchar >> leftbits) & 0xff;
+            bin_len++;
+            leftchar &= ((1 << leftbits) - 1);
+        }
+    }
 
-	if (leftbits != 0) {
-		PyBuffer_Release(&pascii);
-		PyErr_SetString(Error, "Incorrect padding");
-		Py_DECREF(rv);
-		return NULL;
-	}
+    if (leftbits != 0) {
+        PyBuffer_Release(&pascii);
+        PyErr_SetString(Error, "Incorrect padding");
+        Py_DECREF(rv);
+        return NULL;
+    }
 
-	/* And set string size correctly. If the result string is empty
-	** (because the input was all invalid) return the shared empty
-	** string instead; _PyString_Resize() won't do this for us.
-	*/
-	if (bin_len > 0) {
-		if (_PyString_Resize(&rv, bin_len) < 0) {
-			Py_DECREF(rv);
-			rv = NULL;
-		}
-	}
-	else {
-		Py_DECREF(rv);
-		rv = PyString_FromStringAndSize("", 0);
-	}
-	PyBuffer_Release(&pascii);
-	return rv;
+    /* And set string size correctly. If the result string is empty
+    ** (because the input was all invalid) return the shared empty
+    ** string instead; _PyString_Resize() won't do this for us.
+    */
+    if (bin_len > 0) {
+        if (_PyString_Resize(&rv, bin_len) < 0) {
+            Py_DECREF(rv);
+            rv = NULL;
+        }
+    }
+    else {
+        Py_DECREF(rv);
+        rv = PyString_FromStringAndSize("", 0);
+    }
+    PyBuffer_Release(&pascii);
+    return rv;
 }
 
 PyDoc_STRVAR(doc_b2a_base64, "(bin) -> ascii. Base64-code line of data");
@@ -470,66 +470,66 @@
 static PyObject *
 binascii_b2a_base64(PyObject *self, PyObject *args)
 {
-	Py_buffer pbuf;
-	unsigned char *ascii_data, *bin_data;
-	int leftbits = 0;
-	unsigned char this_ch;
-	unsigned int leftchar = 0;
-	PyObject *rv;
-	Py_ssize_t bin_len;
+    Py_buffer pbuf;
+    unsigned char *ascii_data, *bin_data;
+    int leftbits = 0;
+    unsigned char this_ch;
+    unsigned int leftchar = 0;
+    PyObject *rv;
+    Py_ssize_t bin_len;
 
-	if ( !PyArg_ParseTuple(args, "s*:b2a_base64", &pbuf) )
-		return NULL;
-	bin_data = pbuf.buf;
-	bin_len = pbuf.len;
+    if ( !PyArg_ParseTuple(args, "s*:b2a_base64", &pbuf) )
+        return NULL;
+    bin_data = pbuf.buf;
+    bin_len = pbuf.len;
 
-	assert(bin_len >= 0);
+    assert(bin_len >= 0);
 
-	if ( bin_len > BASE64_MAXBIN ) {
-		PyErr_SetString(Error, "Too much data for base64 line");
-		PyBuffer_Release(&pbuf);
-		return NULL;
-	}
+    if ( bin_len > BASE64_MAXBIN ) {
+        PyErr_SetString(Error, "Too much data for base64 line");
+        PyBuffer_Release(&pbuf);
+        return NULL;
+    }
 
-	/* We're lazy and allocate too much (fixed up later).
-	   "+3" leaves room for up to two pad characters and a trailing
-	   newline.  Note that 'b' gets encoded as 'Yg==\n' (1 in, 5 out). */
-	if ( (rv=PyString_FromStringAndSize(NULL, bin_len*2 + 3)) == NULL ) {
-		PyBuffer_Release(&pbuf);
-		return NULL;
-	}
-	ascii_data = (unsigned char *)PyString_AS_STRING(rv);
+    /* We're lazy and allocate too much (fixed up later).
+       "+3" leaves room for up to two pad characters and a trailing
+       newline.  Note that 'b' gets encoded as 'Yg==\n' (1 in, 5 out). */
+    if ( (rv=PyString_FromStringAndSize(NULL, bin_len*2 + 3)) == NULL ) {
+        PyBuffer_Release(&pbuf);
+        return NULL;
+    }
+    ascii_data = (unsigned char *)PyString_AS_STRING(rv);
 
-	for( ; bin_len > 0 ; bin_len--, bin_data++ ) {
-		/* Shift the data into our buffer */
-		leftchar = (leftchar << 8) | *bin_data;
-		leftbits += 8;
+    for( ; bin_len > 0 ; bin_len--, bin_data++ ) {
+        /* Shift the data into our buffer */
+        leftchar = (leftchar << 8) | *bin_data;
+        leftbits += 8;
 
-		/* See if there are 6-bit groups ready */
-		while ( leftbits >= 6 ) {
-			this_ch = (leftchar >> (leftbits-6)) & 0x3f;
-			leftbits -= 6;
-			*ascii_data++ = table_b2a_base64[this_ch];
-		}
-	}
-	if ( leftbits == 2 ) {
-		*ascii_data++ = table_b2a_base64[(leftchar&3) << 4];
-		*ascii_data++ = BASE64_PAD;
-		*ascii_data++ = BASE64_PAD;
-	} else if ( leftbits == 4 ) {
-		*ascii_data++ = table_b2a_base64[(leftchar&0xf) << 2];
-		*ascii_data++ = BASE64_PAD;
-	}
-	*ascii_data++ = '\n';	/* Append a courtesy newline */
+        /* See if there are 6-bit groups ready */
+        while ( leftbits >= 6 ) {
+            this_ch = (leftchar >> (leftbits-6)) & 0x3f;
+            leftbits -= 6;
+            *ascii_data++ = table_b2a_base64[this_ch];
+        }
+    }
+    if ( leftbits == 2 ) {
+        *ascii_data++ = table_b2a_base64[(leftchar&3) << 4];
+        *ascii_data++ = BASE64_PAD;
+        *ascii_data++ = BASE64_PAD;
+    } else if ( leftbits == 4 ) {
+        *ascii_data++ = table_b2a_base64[(leftchar&0xf) << 2];
+        *ascii_data++ = BASE64_PAD;
+    }
+    *ascii_data++ = '\n';       /* Append a courtesy newline */
 
-	if (_PyString_Resize(&rv,
-			   (ascii_data -
-			    (unsigned char *)PyString_AS_STRING(rv))) < 0) {
-		Py_DECREF(rv);
-		rv = NULL;
-	}
-	PyBuffer_Release(&pbuf);
-	return rv;
+    if (_PyString_Resize(&rv,
+                       (ascii_data -
+                        (unsigned char *)PyString_AS_STRING(rv))) < 0) {
+        Py_DECREF(rv);
+        rv = NULL;
+    }
+    PyBuffer_Release(&pbuf);
+    return rv;
 }
 
 PyDoc_STRVAR(doc_a2b_hqx, "ascii -> bin, done. Decode .hqx coding");
@@ -537,85 +537,85 @@
 static PyObject *
 binascii_a2b_hqx(PyObject *self, PyObject *args)
 {
-	Py_buffer pascii;
-	unsigned char *ascii_data, *bin_data;
-	int leftbits = 0;
-	unsigned char this_ch;
-	unsigned int leftchar = 0;
-	PyObject *rv;
-	Py_ssize_t len;
-	int done = 0;
+    Py_buffer pascii;
+    unsigned char *ascii_data, *bin_data;
+    int leftbits = 0;
+    unsigned char this_ch;
+    unsigned int leftchar = 0;
+    PyObject *rv;
+    Py_ssize_t len;
+    int done = 0;
 
-	if ( !PyArg_ParseTuple(args, "s*:a2b_hqx", &pascii) )
-		return NULL;
-	ascii_data = pascii.buf;
-	len = pascii.len;
+    if ( !PyArg_ParseTuple(args, "s*:a2b_hqx", &pascii) )
+        return NULL;
+    ascii_data = pascii.buf;
+    len = pascii.len;
 
-	assert(len >= 0);
+    assert(len >= 0);
 
-	if (len > PY_SSIZE_T_MAX - 2) {
-		PyBuffer_Release(&pascii);
-		return PyErr_NoMemory();
-	}
+    if (len > PY_SSIZE_T_MAX - 2) {
+        PyBuffer_Release(&pascii);
+        return PyErr_NoMemory();
+    }
 
-	/* Allocate a string that is too big (fixed later) 
-	   Add two to the initial length to prevent interning which
-	   would preclude subsequent resizing.  */
-	if ( (rv=PyString_FromStringAndSize(NULL, len+2)) == NULL ) {
-		PyBuffer_Release(&pascii);
-		return NULL;
-	}
-	bin_data = (unsigned char *)PyString_AS_STRING(rv);
+    /* Allocate a string that is too big (fixed later)
+       Add two to the initial length to prevent interning which
+       would preclude subsequent resizing.  */
+    if ( (rv=PyString_FromStringAndSize(NULL, len+2)) == NULL ) {
+        PyBuffer_Release(&pascii);
+        return NULL;
+    }
+    bin_data = (unsigned char *)PyString_AS_STRING(rv);
 
-	for( ; len > 0 ; len--, ascii_data++ ) {
-		/* Get the byte and look it up */
-		this_ch = table_a2b_hqx[*ascii_data];
-		if ( this_ch == SKIP )
-			continue;
-		if ( this_ch == FAIL ) {
-			PyErr_SetString(Error, "Illegal char");
-			PyBuffer_Release(&pascii);
-			Py_DECREF(rv);
-			return NULL;
-		}
-		if ( this_ch == DONE ) {
-			/* The terminating colon */
-			done = 1;
-			break;
-		}
+    for( ; len > 0 ; len--, ascii_data++ ) {
+        /* Get the byte and look it up */
+        this_ch = table_a2b_hqx[*ascii_data];
+        if ( this_ch == SKIP )
+            continue;
+        if ( this_ch == FAIL ) {
+            PyErr_SetString(Error, "Illegal char");
+            PyBuffer_Release(&pascii);
+            Py_DECREF(rv);
+            return NULL;
+        }
+        if ( this_ch == DONE ) {
+            /* The terminating colon */
+            done = 1;
+            break;
+        }
 
-		/* Shift it into the buffer and see if any bytes are ready */
-		leftchar = (leftchar << 6) | (this_ch);
-		leftbits += 6;
-		if ( leftbits >= 8 ) {
-			leftbits -= 8;
-			*bin_data++ = (leftchar >> leftbits) & 0xff;
-			leftchar &= ((1 << leftbits) - 1);
-		}
-	}
+        /* Shift it into the buffer and see if any bytes are ready */
+        leftchar = (leftchar << 6) | (this_ch);
+        leftbits += 6;
+        if ( leftbits >= 8 ) {
+            leftbits -= 8;
+            *bin_data++ = (leftchar >> leftbits) & 0xff;
+            leftchar &= ((1 << leftbits) - 1);
+        }
+    }
 
-	if ( leftbits && !done ) {
-		PyErr_SetString(Incomplete,
-				"String has incomplete number of bytes");
-		PyBuffer_Release(&pascii);
-		Py_DECREF(rv);
-		return NULL;
-	}
-	if (_PyString_Resize(&rv,
-			   (bin_data -
-			    (unsigned char *)PyString_AS_STRING(rv))) < 0) {
-		Py_DECREF(rv);
-		rv = NULL;
-	}
-	if (rv) {
-		PyObject *rrv = Py_BuildValue("Oi", rv, done);
-		PyBuffer_Release(&pascii);
-		Py_DECREF(rv);
-		return rrv;
-	}
+    if ( leftbits && !done ) {
+        PyErr_SetString(Incomplete,
+                        "String has incomplete number of bytes");
+        PyBuffer_Release(&pascii);
+        Py_DECREF(rv);
+        return NULL;
+    }
+    if (_PyString_Resize(&rv,
+                       (bin_data -
+                        (unsigned char *)PyString_AS_STRING(rv))) < 0) {
+        Py_DECREF(rv);
+        rv = NULL;
+    }
+    if (rv) {
+        PyObject *rrv = Py_BuildValue("Oi", rv, done);
+        PyBuffer_Release(&pascii);
+        Py_DECREF(rv);
+        return rrv;
+    }
 
-	PyBuffer_Release(&pascii);
-	return NULL;
+    PyBuffer_Release(&pascii);
+    return NULL;
 }
 
 PyDoc_STRVAR(doc_rlecode_hqx, "Binhex RLE-code binary data");
@@ -623,63 +623,63 @@
 static PyObject *
 binascii_rlecode_hqx(PyObject *self, PyObject *args)
 {
-	Py_buffer pbuf;
-	unsigned char *in_data, *out_data;
-	PyObject *rv;
-	unsigned char ch;
-	Py_ssize_t in, inend, len;
+    Py_buffer pbuf;
+    unsigned char *in_data, *out_data;
+    PyObject *rv;
+    unsigned char ch;
+    Py_ssize_t in, inend, len;
 
-	if ( !PyArg_ParseTuple(args, "s*:rlecode_hqx", &pbuf) )
-		return NULL;
-	in_data = pbuf.buf;
-	len = pbuf.len;
+    if ( !PyArg_ParseTuple(args, "s*:rlecode_hqx", &pbuf) )
+        return NULL;
+    in_data = pbuf.buf;
+    len = pbuf.len;
 
-	assert(len >= 0);
+    assert(len >= 0);
 
-	if (len > PY_SSIZE_T_MAX / 2 - 2) {
-		PyBuffer_Release(&pbuf);
-		return PyErr_NoMemory();
-	}
+    if (len > PY_SSIZE_T_MAX / 2 - 2) {
+        PyBuffer_Release(&pbuf);
+        return PyErr_NoMemory();
+    }
 
-	/* Worst case: output is twice as big as input (fixed later) */
-	if ( (rv=PyString_FromStringAndSize(NULL, len*2+2)) == NULL ) {
-		PyBuffer_Release(&pbuf);
-		return NULL;
-	}
-	out_data = (unsigned char *)PyString_AS_STRING(rv);
+    /* Worst case: output is twice as big as input (fixed later) */
+    if ( (rv=PyString_FromStringAndSize(NULL, len*2+2)) == NULL ) {
+        PyBuffer_Release(&pbuf);
+        return NULL;
+    }
+    out_data = (unsigned char *)PyString_AS_STRING(rv);
 
-	for( in=0; in<len; in++) {
-		ch = in_data[in];
-		if ( ch == RUNCHAR ) {
-			/* RUNCHAR. Escape it. */
-			*out_data++ = RUNCHAR;
-			*out_data++ = 0;
-		} else {
-			/* Check how many following are the same */
-			for(inend=in+1;
-			    inend<len && in_data[inend] == ch &&
-				    inend < in+255;
-			    inend++) ;
-			if ( inend - in > 3 ) {
-				/* More than 3 in a row. Output RLE. */
-				*out_data++ = ch;
-				*out_data++ = RUNCHAR;
-				*out_data++ = inend-in;
-				in = inend-1;
-			} else {
-				/* Less than 3. Output the byte itself */
-				*out_data++ = ch;
-			}
-		}
-	}
-	if (_PyString_Resize(&rv,
-			   (out_data -
-			    (unsigned char *)PyString_AS_STRING(rv))) < 0) {
-		Py_DECREF(rv);
-		rv = NULL;
-	}
-	PyBuffer_Release(&pbuf);
-	return rv;
+    for( in=0; in<len; in++) {
+        ch = in_data[in];
+        if ( ch == RUNCHAR ) {
+            /* RUNCHAR. Escape it. */
+            *out_data++ = RUNCHAR;
+            *out_data++ = 0;
+        } else {
+            /* Check how many following are the same */
+            for(inend=in+1;
+                inend<len && in_data[inend] == ch &&
+                    inend < in+255;
+                inend++) ;
+            if ( inend - in > 3 ) {
+                /* More than 3 in a row. Output RLE. */
+                *out_data++ = ch;
+                *out_data++ = RUNCHAR;
+                *out_data++ = inend-in;
+                in = inend-1;
+            } else {
+                /* Less than 3. Output the byte itself */
+                *out_data++ = ch;
+            }
+        }
+    }
+    if (_PyString_Resize(&rv,
+                       (out_data -
+                        (unsigned char *)PyString_AS_STRING(rv))) < 0) {
+        Py_DECREF(rv);
+        rv = NULL;
+    }
+    PyBuffer_Release(&pbuf);
+    return rv;
 }
 
 PyDoc_STRVAR(doc_b2a_hqx, "Encode .hqx data");
@@ -687,56 +687,56 @@
 static PyObject *
 binascii_b2a_hqx(PyObject *self, PyObject *args)
 {
-	Py_buffer pbin;
-	unsigned char *ascii_data, *bin_data;
-	int leftbits = 0;
-	unsigned char this_ch;
-	unsigned int leftchar = 0;
-	PyObject *rv;
-	Py_ssize_t len;
+    Py_buffer pbin;
+    unsigned char *ascii_data, *bin_data;
+    int leftbits = 0;
+    unsigned char this_ch;
+    unsigned int leftchar = 0;
+    PyObject *rv;
+    Py_ssize_t len;
 
-	if ( !PyArg_ParseTuple(args, "s*:b2a_hqx", &pbin) )
-		return NULL;
-	bin_data = pbin.buf;
-	len = pbin.len;
+    if ( !PyArg_ParseTuple(args, "s*:b2a_hqx", &pbin) )
+        return NULL;
+    bin_data = pbin.buf;
+    len = pbin.len;
 
-	assert(len >= 0);
+    assert(len >= 0);
 
-	if (len > PY_SSIZE_T_MAX / 2 - 2) {
-		PyBuffer_Release(&pbin);
-		return PyErr_NoMemory();
-	}
+    if (len > PY_SSIZE_T_MAX / 2 - 2) {
+        PyBuffer_Release(&pbin);
+        return PyErr_NoMemory();
+    }
 
-	/* Allocate a buffer that is at least large enough */
-	if ( (rv=PyString_FromStringAndSize(NULL, len*2+2)) == NULL ) {
-		PyBuffer_Release(&pbin);
-		return NULL;
-	}
-	ascii_data = (unsigned char *)PyString_AS_STRING(rv);
+    /* Allocate a buffer that is at least large enough */
+    if ( (rv=PyString_FromStringAndSize(NULL, len*2+2)) == NULL ) {
+        PyBuffer_Release(&pbin);
+        return NULL;
+    }
+    ascii_data = (unsigned char *)PyString_AS_STRING(rv);
 
-	for( ; len > 0 ; len--, bin_data++ ) {
-		/* Shift into our buffer, and output any 6bits ready */
-		leftchar = (leftchar << 8) | *bin_data;
-		leftbits += 8;
-		while ( leftbits >= 6 ) {
-			this_ch = (leftchar >> (leftbits-6)) & 0x3f;
-			leftbits -= 6;
-			*ascii_data++ = table_b2a_hqx[this_ch];
-		}
-	}
-	/* Output a possible runt byte */
-	if ( leftbits ) {
-		leftchar <<= (6-leftbits);
-		*ascii_data++ = table_b2a_hqx[leftchar & 0x3f];
-	}
-	if (_PyString_Resize(&rv,
-			   (ascii_data -
-			    (unsigned char *)PyString_AS_STRING(rv))) < 0) {
-		Py_DECREF(rv);
-		rv = NULL;
-	}
-	PyBuffer_Release(&pbin);
-	return rv;
+    for( ; len > 0 ; len--, bin_data++ ) {
+        /* Shift into our buffer, and output any 6bits ready */
+        leftchar = (leftchar << 8) | *bin_data;
+        leftbits += 8;
+        while ( leftbits >= 6 ) {
+            this_ch = (leftchar >> (leftbits-6)) & 0x3f;
+            leftbits -= 6;
+            *ascii_data++ = table_b2a_hqx[this_ch];
+        }
+    }
+    /* Output a possible runt byte */
+    if ( leftbits ) {
+        leftchar <<= (6-leftbits);
+        *ascii_data++ = table_b2a_hqx[leftchar & 0x3f];
+    }
+    if (_PyString_Resize(&rv,
+                       (ascii_data -
+                        (unsigned char *)PyString_AS_STRING(rv))) < 0) {
+        Py_DECREF(rv);
+        rv = NULL;
+    }
+    PyBuffer_Release(&pbin);
+    return rv;
 }
 
 PyDoc_STRVAR(doc_rledecode_hqx, "Decode hexbin RLE-coded string");
@@ -744,116 +744,116 @@
 static PyObject *
 binascii_rledecode_hqx(PyObject *self, PyObject *args)
 {
-	Py_buffer pin;
-	unsigned char *in_data, *out_data;
-	unsigned char in_byte, in_repeat;
-	PyObject *rv;
-	Py_ssize_t in_len, out_len, out_len_left;
+    Py_buffer pin;
+    unsigned char *in_data, *out_data;
+    unsigned char in_byte, in_repeat;
+    PyObject *rv;
+    Py_ssize_t in_len, out_len, out_len_left;
 
-	if ( !PyArg_ParseTuple(args, "s*:rledecode_hqx", &pin) )
-		return NULL;
-	in_data = pin.buf;
-	in_len = pin.len;
+    if ( !PyArg_ParseTuple(args, "s*:rledecode_hqx", &pin) )
+        return NULL;
+    in_data = pin.buf;
+    in_len = pin.len;
 
-	assert(in_len >= 0);
+    assert(in_len >= 0);
 
-	/* Empty string is a special case */
-	if ( in_len == 0 ) {
-		PyBuffer_Release(&pin);
-		return PyString_FromStringAndSize("", 0);
-	}
-	else if (in_len > PY_SSIZE_T_MAX / 2) {
-		PyBuffer_Release(&pin);
-		return PyErr_NoMemory();
-	}
+    /* Empty string is a special case */
+    if ( in_len == 0 ) {
+        PyBuffer_Release(&pin);
+        return PyString_FromStringAndSize("", 0);
+    }
+    else if (in_len > PY_SSIZE_T_MAX / 2) {
+        PyBuffer_Release(&pin);
+        return PyErr_NoMemory();
+    }
 
-	/* Allocate a buffer of reasonable size. Resized when needed */
-	out_len = in_len*2;
-	if ( (rv=PyString_FromStringAndSize(NULL, out_len)) == NULL ) {
-		PyBuffer_Release(&pin);
-		return NULL;
-	}
-	out_len_left = out_len;
-	out_data = (unsigned char *)PyString_AS_STRING(rv);
+    /* Allocate a buffer of reasonable size. Resized when needed */
+    out_len = in_len*2;
+    if ( (rv=PyString_FromStringAndSize(NULL, out_len)) == NULL ) {
+        PyBuffer_Release(&pin);
+        return NULL;
+    }
+    out_len_left = out_len;
+    out_data = (unsigned char *)PyString_AS_STRING(rv);
 
-	/*
-	** We need two macros here to get/put bytes and handle
-	** end-of-buffer for input and output strings.
-	*/
+    /*
+    ** We need two macros here to get/put bytes and handle
+    ** end-of-buffer for input and output strings.
+    */
 #define INBYTE(b) \
-	do { \
-	         if ( --in_len < 0 ) { \
-			   PyErr_SetString(Incomplete, ""); \
-			   Py_DECREF(rv); \
-			   PyBuffer_Release(&pin); \
-			   return NULL; \
-		 } \
-		 b = *in_data++; \
-	} while(0)
+    do { \
+             if ( --in_len < 0 ) { \
+                       PyErr_SetString(Incomplete, ""); \
+                       Py_DECREF(rv); \
+                       PyBuffer_Release(&pin); \
+                       return NULL; \
+             } \
+             b = *in_data++; \
+    } while(0)
 
 #define OUTBYTE(b) \
-	do { \
-		 if ( --out_len_left < 0 ) { \
-			  if ( out_len > PY_SSIZE_T_MAX / 2) return PyErr_NoMemory(); \
-			  if (_PyString_Resize(&rv, 2*out_len) < 0) \
-			    { Py_DECREF(rv); PyBuffer_Release(&pin); return NULL; } \
-			  out_data = (unsigned char *)PyString_AS_STRING(rv) \
-								 + out_len; \
-			  out_len_left = out_len-1; \
-			  out_len = out_len * 2; \
-		 } \
-		 *out_data++ = b; \
-	} while(0)
+    do { \
+             if ( --out_len_left < 0 ) { \
+                      if ( out_len > PY_SSIZE_T_MAX / 2) return PyErr_NoMemory(); \
+                      if (_PyString_Resize(&rv, 2*out_len) < 0) \
+                        { Py_DECREF(rv); PyBuffer_Release(&pin); return NULL; } \
+                      out_data = (unsigned char *)PyString_AS_STRING(rv) \
+                                                             + out_len; \
+                      out_len_left = out_len-1; \
+                      out_len = out_len * 2; \
+             } \
+             *out_data++ = b; \
+    } while(0)
 
-		/*
-		** Handle first byte separately (since we have to get angry
-		** in case of an orphaned RLE code).
-		*/
-		INBYTE(in_byte);
+        /*
+        ** Handle first byte separately (since we have to get angry
+        ** in case of an orphaned RLE code).
+        */
+        INBYTE(in_byte);
 
-	if (in_byte == RUNCHAR) {
-		INBYTE(in_repeat);
-		if (in_repeat != 0) {
-			/* Note Error, not Incomplete (which is at the end
-			** of the string only). This is a programmer error.
-			*/
-			PyErr_SetString(Error, "Orphaned RLE code at start");
-			PyBuffer_Release(&pin);
-			Py_DECREF(rv);
-			return NULL;
-		}
-		OUTBYTE(RUNCHAR);
-	} else {
-		OUTBYTE(in_byte);
-	}
+    if (in_byte == RUNCHAR) {
+        INBYTE(in_repeat);
+        if (in_repeat != 0) {
+            /* Note Error, not Incomplete (which is at the end
+            ** of the string only). This is a programmer error.
+            */
+            PyErr_SetString(Error, "Orphaned RLE code at start");
+            PyBuffer_Release(&pin);
+            Py_DECREF(rv);
+            return NULL;
+        }
+        OUTBYTE(RUNCHAR);
+    } else {
+        OUTBYTE(in_byte);
+    }
 
-	while( in_len > 0 ) {
-		INBYTE(in_byte);
+    while( in_len > 0 ) {
+        INBYTE(in_byte);
 
-		if (in_byte == RUNCHAR) {
-			INBYTE(in_repeat);
-			if ( in_repeat == 0 ) {
-				/* Just an escaped RUNCHAR value */
-				OUTBYTE(RUNCHAR);
-			} else {
-				/* Pick up value and output a sequence of it */
-				in_byte = out_data[-1];
-				while ( --in_repeat > 0 )
-					OUTBYTE(in_byte);
-			}
-		} else {
-			/* Normal byte */
-			OUTBYTE(in_byte);
-		}
-	}
-	if (_PyString_Resize(&rv,
-			   (out_data -
-			    (unsigned char *)PyString_AS_STRING(rv))) < 0) {
-		Py_DECREF(rv);
-		rv = NULL;
-	}
-	PyBuffer_Release(&pin);
-	return rv;
+        if (in_byte == RUNCHAR) {
+            INBYTE(in_repeat);
+            if ( in_repeat == 0 ) {
+                /* Just an escaped RUNCHAR value */
+                OUTBYTE(RUNCHAR);
+            } else {
+                /* Pick up value and output a sequence of it */
+                in_byte = out_data[-1];
+                while ( --in_repeat > 0 )
+                    OUTBYTE(in_byte);
+            }
+        } else {
+            /* Normal byte */
+            OUTBYTE(in_byte);
+        }
+    }
+    if (_PyString_Resize(&rv,
+                       (out_data -
+                        (unsigned char *)PyString_AS_STRING(rv))) < 0) {
+        Py_DECREF(rv);
+        rv = NULL;
+    }
+    PyBuffer_Release(&pin);
+    return rv;
 }
 
 PyDoc_STRVAR(doc_crc_hqx,
@@ -862,22 +862,22 @@
 static PyObject *
 binascii_crc_hqx(PyObject *self, PyObject *args)
 {
-	Py_buffer pin;
-	unsigned char *bin_data;
-	unsigned int crc;
-	Py_ssize_t len;
+    Py_buffer pin;
+    unsigned char *bin_data;
+    unsigned int crc;
+    Py_ssize_t len;
 
-	if ( !PyArg_ParseTuple(args, "s*i:crc_hqx", &pin, &crc) )
-		return NULL;
-	bin_data = pin.buf;
-	len = pin.len;
+    if ( !PyArg_ParseTuple(args, "s*i:crc_hqx", &pin, &crc) )
+        return NULL;
+    bin_data = pin.buf;
+    len = pin.len;
 
-	while(len-- > 0) {
-		crc=((crc<<8)&0xff00)^crctab_hqx[((crc>>8)&0xff)^*bin_data++];
-	}
+    while(len-- > 0) {
+        crc=((crc<<8)&0xff00)^crctab_hqx[((crc>>8)&0xff)^*bin_data++];
+    }
 
-	PyBuffer_Release(&pin);
-	return Py_BuildValue("i", crc);
+    PyBuffer_Release(&pin);
+    return Py_BuildValue("i", crc);
 }
 
 PyDoc_STRVAR(doc_crc32,
@@ -895,7 +895,7 @@
     int signed_val;
 
     if (!PyArg_ParseTuple(args, "s*|I:crc32", &pbuf, &crc32val))
-        return NULL;
+    return NULL;
     /* In Python 2.x we return a signed integer regardless of native platform
      * long size (the 32bit unsigned long is treated as 32-bit signed and sign
      * extended into a 64-bit long inside the integer object).  3.0 does the
@@ -1028,25 +1028,25 @@
 static PyObject *
 binascii_crc32(PyObject *self, PyObject *args)
 { /* By Jim Ahlstrom; All rights transferred to CNRI */
-	Py_buffer pbin;
-	unsigned char *bin_data;
-	unsigned int crc = 0U;	/* initial value of CRC */
-	Py_ssize_t len;
-	int result;
+    Py_buffer pbin;
+    unsigned char *bin_data;
+    unsigned int crc = 0U;      /* initial value of CRC */
+    Py_ssize_t len;
+    int result;
 
-	if ( !PyArg_ParseTuple(args, "s*|I:crc32", &pbin, &crc) )
-		return NULL;
-	bin_data = pbin.buf;
-	len = pbin.len;
+    if ( !PyArg_ParseTuple(args, "s*|I:crc32", &pbin, &crc) )
+        return NULL;
+    bin_data = pbin.buf;
+    len = pbin.len;
 
-	crc = ~ crc;
-	while (len-- > 0)
-		crc = crc_32_tab[(crc ^ *bin_data++) & 0xffU] ^ (crc >> 8);
-		/* Note:  (crc >> 8) MUST zero fill on left */
+    crc = ~ crc;
+    while (len-- > 0)
+        crc = crc_32_tab[(crc ^ *bin_data++) & 0xffU] ^ (crc >> 8);
+        /* Note:  (crc >> 8) MUST zero fill on left */
 
-	result = (int)(crc ^ 0xFFFFFFFFU);
-	PyBuffer_Release(&pbin);
-	return PyInt_FromLong(result);
+    result = (int)(crc ^ 0xFFFFFFFFU);
+    PyBuffer_Release(&pbin);
+    return PyInt_FromLong(result);
 }
 #endif  /* USE_ZLIB_CRC32 */
 
@@ -1054,43 +1054,43 @@
 static PyObject *
 binascii_hexlify(PyObject *self, PyObject *args)
 {
-	Py_buffer parg;
-	char* argbuf;
-	Py_ssize_t arglen;
-	PyObject *retval;
-	char* retbuf;
-	Py_ssize_t i, j;
+    Py_buffer parg;
+    char* argbuf;
+    Py_ssize_t arglen;
+    PyObject *retval;
+    char* retbuf;
+    Py_ssize_t i, j;
 
-	if (!PyArg_ParseTuple(args, "s*:b2a_hex", &parg))
-		return NULL;
-	argbuf = parg.buf;
-	arglen = parg.len;
+    if (!PyArg_ParseTuple(args, "s*:b2a_hex", &parg))
+        return NULL;
+    argbuf = parg.buf;
+    arglen = parg.len;
 
-	assert(arglen >= 0);
-	if (arglen > PY_SSIZE_T_MAX / 2) {
-		PyBuffer_Release(&parg);
-		return PyErr_NoMemory();
-	}
+    assert(arglen >= 0);
+    if (arglen > PY_SSIZE_T_MAX / 2) {
+        PyBuffer_Release(&parg);
+        return PyErr_NoMemory();
+    }
 
-	retval = PyString_FromStringAndSize(NULL, arglen*2);
-	if (!retval) {
-		PyBuffer_Release(&parg);
-		return NULL;
-	}
-	retbuf = PyString_AS_STRING(retval);
+    retval = PyString_FromStringAndSize(NULL, arglen*2);
+    if (!retval) {
+        PyBuffer_Release(&parg);
+        return NULL;
+    }
+    retbuf = PyString_AS_STRING(retval);
 
-	/* make hex version of string, taken from shamodule.c */
-	for (i=j=0; i < arglen; i++) {
-		char c;
-		c = (argbuf[i] >> 4) & 0xf;
-		c = (c>9) ? c+'a'-10 : c + '0';
-		retbuf[j++] = c;
-		c = argbuf[i] & 0xf;
-		c = (c>9) ? c+'a'-10 : c + '0';
-		retbuf[j++] = c;
-	}
-	PyBuffer_Release(&parg);
-	return retval;
+    /* make hex version of string, taken from shamodule.c */
+    for (i=j=0; i < arglen; i++) {
+        char c;
+        c = (argbuf[i] >> 4) & 0xf;
+        c = (c>9) ? c+'a'-10 : c + '0';
+        retbuf[j++] = c;
+        c = argbuf[i] & 0xf;
+        c = (c>9) ? c+'a'-10 : c + '0';
+        retbuf[j++] = c;
+    }
+    PyBuffer_Release(&parg);
+    return retval;
 }
 
 PyDoc_STRVAR(doc_hexlify,
@@ -1102,69 +1102,69 @@
 static int
 to_int(int c)
 {
-	if (isdigit(c))
-		return c - '0';
-	else {
-		if (isupper(c))
-			c = tolower(c);
-		if (c >= 'a' && c <= 'f')
-			return c - 'a' + 10;
-	}
-	return -1;
+    if (isdigit(c))
+        return c - '0';
+    else {
+        if (isupper(c))
+            c = tolower(c);
+        if (c >= 'a' && c <= 'f')
+            return c - 'a' + 10;
+    }
+    return -1;
 }
 
 
 static PyObject *
 binascii_unhexlify(PyObject *self, PyObject *args)
 {
-	Py_buffer parg;
-	char* argbuf;
-	Py_ssize_t arglen;
-	PyObject *retval;
-	char* retbuf;
-	Py_ssize_t i, j;
+    Py_buffer parg;
+    char* argbuf;
+    Py_ssize_t arglen;
+    PyObject *retval;
+    char* retbuf;
+    Py_ssize_t i, j;
 
-	if (!PyArg_ParseTuple(args, "s*:a2b_hex", &parg))
-		return NULL;
-	argbuf = parg.buf;
-	arglen = parg.len;
+    if (!PyArg_ParseTuple(args, "s*:a2b_hex", &parg))
+        return NULL;
+    argbuf = parg.buf;
+    arglen = parg.len;
 
-	assert(arglen >= 0);
+    assert(arglen >= 0);
 
-	/* XXX What should we do about strings with an odd length?  Should
-	 * we add an implicit leading zero, or a trailing zero?  For now,
-	 * raise an exception.
-	 */
-	if (arglen % 2) {
-		PyBuffer_Release(&parg);
-		PyErr_SetString(PyExc_TypeError, "Odd-length string");
-		return NULL;
-	}
+    /* XXX What should we do about strings with an odd length?  Should
+     * we add an implicit leading zero, or a trailing zero?  For now,
+     * raise an exception.
+     */
+    if (arglen % 2) {
+        PyBuffer_Release(&parg);
+        PyErr_SetString(PyExc_TypeError, "Odd-length string");
+        return NULL;
+    }
 
-	retval = PyString_FromStringAndSize(NULL, (arglen/2));
-	if (!retval) {
-		PyBuffer_Release(&parg);
-		return NULL;
-	}
-	retbuf = PyString_AS_STRING(retval);
+    retval = PyString_FromStringAndSize(NULL, (arglen/2));
+    if (!retval) {
+        PyBuffer_Release(&parg);
+        return NULL;
+    }
+    retbuf = PyString_AS_STRING(retval);
 
-	for (i=j=0; i < arglen; i += 2) {
-		int top = to_int(Py_CHARMASK(argbuf[i]));
-		int bot = to_int(Py_CHARMASK(argbuf[i+1]));
-		if (top == -1 || bot == -1) {
-			PyErr_SetString(PyExc_TypeError,
-					"Non-hexadecimal digit found");
-			goto finally;
-		}
-		retbuf[j++] = (top << 4) + bot;
-	}
-	PyBuffer_Release(&parg);
-	return retval;
+    for (i=j=0; i < arglen; i += 2) {
+        int top = to_int(Py_CHARMASK(argbuf[i]));
+        int bot = to_int(Py_CHARMASK(argbuf[i+1]));
+        if (top == -1 || bot == -1) {
+            PyErr_SetString(PyExc_TypeError,
+                            "Non-hexadecimal digit found");
+            goto finally;
+        }
+        retbuf[j++] = (top << 4) + bot;
+    }
+    PyBuffer_Release(&parg);
+    return retval;
 
   finally:
-	PyBuffer_Release(&parg);
-	Py_DECREF(retval);
-	return NULL;
+    PyBuffer_Release(&parg);
+    Py_DECREF(retval);
+    return NULL;
 }
 
 PyDoc_STRVAR(doc_unhexlify,
@@ -1193,96 +1193,96 @@
 static PyObject*
 binascii_a2b_qp(PyObject *self, PyObject *args, PyObject *kwargs)
 {
-	Py_ssize_t in, out;
-	char ch;
-	Py_buffer pdata;
-	unsigned char *data, *odata;
-	Py_ssize_t datalen = 0;
-	PyObject *rv;
-	static char *kwlist[] = {"data", "header", NULL};
-	int header = 0;
+    Py_ssize_t in, out;
+    char ch;
+    Py_buffer pdata;
+    unsigned char *data, *odata;
+    Py_ssize_t datalen = 0;
+    PyObject *rv;
+    static char *kwlist[] = {"data", "header", NULL};
+    int header = 0;
 
-	if (!PyArg_ParseTupleAndKeywords(args, kwargs, "s*|i", kwlist, &pdata,
-	      &header))
-		return NULL;
-	data = pdata.buf;
-	datalen = pdata.len;
+    if (!PyArg_ParseTupleAndKeywords(args, kwargs, "s*|i", kwlist, &pdata,
+          &header))
+        return NULL;
+    data = pdata.buf;
+    datalen = pdata.len;
 
-	/* We allocate the output same size as input, this is overkill.
-	 * The previous implementation used calloc() so we'll zero out the
-	 * memory here too, since PyMem_Malloc() does not guarantee that.
-	 */
-	odata = (unsigned char *) PyMem_Malloc(datalen);
-	if (odata == NULL) {
-		PyBuffer_Release(&pdata);
-		PyErr_NoMemory();
-		return NULL;
-	}
-	memset(odata, 0, datalen);
+    /* We allocate the output same size as input, this is overkill.
+     * The previous implementation used calloc() so we'll zero out the
+     * memory here too, since PyMem_Malloc() does not guarantee that.
+     */
+    odata = (unsigned char *) PyMem_Malloc(datalen);
+    if (odata == NULL) {
+        PyBuffer_Release(&pdata);
+        PyErr_NoMemory();
+        return NULL;
+    }
+    memset(odata, 0, datalen);
 
-	in = out = 0;
-	while (in < datalen) {
-		if (data[in] == '=') {
-			in++;
-			if (in >= datalen) break;
-			/* Soft line breaks */
-			if ((data[in] == '\n') || (data[in] == '\r')) {
-				if (data[in] != '\n') {
-					while (in < datalen && data[in] != '\n') in++;
-				}
-				if (in < datalen) in++;
-			}
-			else if (data[in] == '=') {
-				/* broken case from broken python qp */
-				odata[out++] = '=';
-				in++;
-			}
-			else if (((data[in] >= 'A' && data[in] <= 'F') ||
-			          (data[in] >= 'a' && data[in] <= 'f') ||
-				  (data[in] >= '0' && data[in] <= '9')) &&
-			         ((data[in+1] >= 'A' && data[in+1] <= 'F') ||
-				  (data[in+1] >= 'a' && data[in+1] <= 'f') ||
-				  (data[in+1] >= '0' && data[in+1] <= '9'))) {
-				/* hexval */
-				ch = hexval(data[in]) << 4;
-				in++;
-				ch |= hexval(data[in]);
-				in++;
-				odata[out++] = ch;
-			}
-			else {
-			  odata[out++] = '=';
-			}
-		}
-		else if (header && data[in] == '_') {
-			odata[out++] = ' ';
-			in++;
-		}
-		else {
-			odata[out] = data[in];
-			in++;
-			out++;
-		}
-	}
-	if ((rv = PyString_FromStringAndSize((char *)odata, out)) == NULL) {
-		PyBuffer_Release(&pdata);
-		PyMem_Free(odata);
-		return NULL;
-	}
-	PyBuffer_Release(&pdata);
-	PyMem_Free(odata);
-	return rv;
+    in = out = 0;
+    while (in < datalen) {
+        if (data[in] == '=') {
+            in++;
+            if (in >= datalen) break;
+            /* Soft line breaks */
+            if ((data[in] == '\n') || (data[in] == '\r')) {
+                if (data[in] != '\n') {
+                    while (in < datalen && data[in] != '\n') in++;
+                }
+                if (in < datalen) in++;
+            }
+            else if (data[in] == '=') {
+                /* broken case from broken python qp */
+                odata[out++] = '=';
+                in++;
+            }
+            else if (((data[in] >= 'A' && data[in] <= 'F') ||
+                      (data[in] >= 'a' && data[in] <= 'f') ||
+                      (data[in] >= '0' && data[in] <= '9')) &&
+                     ((data[in+1] >= 'A' && data[in+1] <= 'F') ||
+                      (data[in+1] >= 'a' && data[in+1] <= 'f') ||
+                      (data[in+1] >= '0' && data[in+1] <= '9'))) {
+                /* hexval */
+                ch = hexval(data[in]) << 4;
+                in++;
+                ch |= hexval(data[in]);
+                in++;
+                odata[out++] = ch;
+            }
+            else {
+              odata[out++] = '=';
+            }
+        }
+        else if (header && data[in] == '_') {
+            odata[out++] = ' ';
+            in++;
+        }
+        else {
+            odata[out] = data[in];
+            in++;
+            out++;
+        }
+    }
+    if ((rv = PyString_FromStringAndSize((char *)odata, out)) == NULL) {
+        PyBuffer_Release(&pdata);
+        PyMem_Free(odata);
+        return NULL;
+    }
+    PyBuffer_Release(&pdata);
+    PyMem_Free(odata);
+    return rv;
 }
 
 static int
 to_hex (unsigned char ch, unsigned char *s)
 {
-	unsigned int uvalue = ch;
+    unsigned int uvalue = ch;
 
-	s[1] = "0123456789ABCDEF"[uvalue % 16];
-	uvalue = (uvalue / 16);
-	s[0] = "0123456789ABCDEF"[uvalue % 16];
-	return 0;
+    s[1] = "0123456789ABCDEF"[uvalue % 16];
+    uvalue = (uvalue / 16);
+    s[0] = "0123456789ABCDEF"[uvalue % 16];
+    return 0;
 }
 
 PyDoc_STRVAR(doc_b2a_qp,
@@ -1299,210 +1299,210 @@
 static PyObject*
 binascii_b2a_qp (PyObject *self, PyObject *args, PyObject *kwargs)
 {
-	Py_ssize_t in, out;
-	Py_buffer pdata;
-	unsigned char *data, *odata;
-	Py_ssize_t datalen = 0, odatalen = 0;
-	PyObject *rv;
-	unsigned int linelen = 0;
-	static char *kwlist[] = {"data", "quotetabs", "istext",
-                                       "header", NULL};
-	int istext = 1;
-	int quotetabs = 0;
-	int header = 0;
-	unsigned char ch;
-	int crlf = 0;
-	unsigned char *p;
+    Py_ssize_t in, out;
+    Py_buffer pdata;
+    unsigned char *data, *odata;
+    Py_ssize_t datalen = 0, odatalen = 0;
+    PyObject *rv;
+    unsigned int linelen = 0;
+    static char *kwlist[] = {"data", "quotetabs", "istext",
+                                   "header", NULL};
+    int istext = 1;
+    int quotetabs = 0;
+    int header = 0;
+    unsigned char ch;
+    int crlf = 0;
+    unsigned char *p;
 
-	if (!PyArg_ParseTupleAndKeywords(args, kwargs, "s*|iii", kwlist, &pdata,
-	      &quotetabs, &istext, &header))
-		return NULL;
-	data = pdata.buf;
-	datalen = pdata.len;
+    if (!PyArg_ParseTupleAndKeywords(args, kwargs, "s*|iii", kwlist, &pdata,
+          &quotetabs, &istext, &header))
+        return NULL;
+    data = pdata.buf;
+    datalen = pdata.len;
 
-	/* See if this string is using CRLF line ends */
-	/* XXX: this function has the side effect of converting all of
-	 * the end of lines to be the same depending on this detection
-	 * here */
-	p = (unsigned char *) memchr(data, '\n', datalen);
-	if ((p != NULL) && (p > data) && (*(p-1) == '\r'))
-		crlf = 1;
+    /* See if this string is using CRLF line ends */
+    /* XXX: this function has the side effect of converting all of
+     * the end of lines to be the same depending on this detection
+     * here */
+    p = (unsigned char *) memchr(data, '\n', datalen);
+    if ((p != NULL) && (p > data) && (*(p-1) == '\r'))
+        crlf = 1;
 
-	/* First, scan to see how many characters need to be encoded */
-	in = 0;
-	while (in < datalen) {
-		if ((data[in] > 126) ||
-		    (data[in] == '=') ||
-		    (header && data[in] == '_') ||
-		    ((data[in] == '.') && (linelen == 0) &&
-		     (data[in+1] == '\n' || data[in+1] == '\r' || data[in+1] == 0)) ||
-		    (!istext && ((data[in] == '\r') || (data[in] == '\n'))) ||
-		    ((data[in] == '\t' || data[in] == ' ') && (in + 1 == datalen)) ||
-		    ((data[in] < 33) &&
-		     (data[in] != '\r') && (data[in] != '\n') &&
-		     (quotetabs ||
-		     	(!quotetabs && ((data[in] != '\t') && (data[in] != ' '))))))
-		{
-			if ((linelen + 3) >= MAXLINESIZE) {
-				linelen = 0;
-				if (crlf)
-					odatalen += 3;
-				else
-					odatalen += 2;
-			}
-			linelen += 3;
-			odatalen += 3;
-			in++;
-		}
-		else {
-		  	if (istext &&
-			    ((data[in] == '\n') ||
-			     ((in+1 < datalen) && (data[in] == '\r') &&
-			     (data[in+1] == '\n'))))
-			{
-			  	linelen = 0;
-				/* Protect against whitespace on end of line */
-				if (in && ((data[in-1] == ' ') || (data[in-1] == '\t')))
-					odatalen += 2;
-				if (crlf)
-					odatalen += 2;
-				else
-					odatalen += 1;
-				if (data[in] == '\r')
-					in += 2;
-				else
-					in++;
-			}
-			else {
-				if ((in + 1 != datalen) &&
-				    (data[in+1] != '\n') &&
-				    (linelen + 1) >= MAXLINESIZE) {
-					linelen = 0;
-					if (crlf)
-						odatalen += 3;
-					else
-						odatalen += 2;
-				}
-				linelen++;
-				odatalen++;
-				in++;
-			}
-		}
-	}
+    /* First, scan to see how many characters need to be encoded */
+    in = 0;
+    while (in < datalen) {
+        if ((data[in] > 126) ||
+            (data[in] == '=') ||
+            (header && data[in] == '_') ||
+            ((data[in] == '.') && (linelen == 0) &&
+             (data[in+1] == '\n' || data[in+1] == '\r' || data[in+1] == 0)) ||
+            (!istext && ((data[in] == '\r') || (data[in] == '\n'))) ||
+            ((data[in] == '\t' || data[in] == ' ') && (in + 1 == datalen)) ||
+            ((data[in] < 33) &&
+             (data[in] != '\r') && (data[in] != '\n') &&
+             (quotetabs ||
+            (!quotetabs && ((data[in] != '\t') && (data[in] != ' '))))))
+        {
+            if ((linelen + 3) >= MAXLINESIZE) {
+                linelen = 0;
+                if (crlf)
+                    odatalen += 3;
+                else
+                    odatalen += 2;
+            }
+            linelen += 3;
+            odatalen += 3;
+            in++;
+        }
+        else {
+            if (istext &&
+                ((data[in] == '\n') ||
+                 ((in+1 < datalen) && (data[in] == '\r') &&
+                 (data[in+1] == '\n'))))
+            {
+                linelen = 0;
+                /* Protect against whitespace on end of line */
+                if (in && ((data[in-1] == ' ') || (data[in-1] == '\t')))
+                    odatalen += 2;
+                if (crlf)
+                    odatalen += 2;
+                else
+                    odatalen += 1;
+                if (data[in] == '\r')
+                    in += 2;
+                else
+                    in++;
+            }
+            else {
+                if ((in + 1 != datalen) &&
+                    (data[in+1] != '\n') &&
+                    (linelen + 1) >= MAXLINESIZE) {
+                    linelen = 0;
+                    if (crlf)
+                        odatalen += 3;
+                    else
+                        odatalen += 2;
+                }
+                linelen++;
+                odatalen++;
+                in++;
+            }
+        }
+    }
 
-	/* We allocate the output same size as input, this is overkill.
-	 * The previous implementation used calloc() so we'll zero out the
-	 * memory here too, since PyMem_Malloc() does not guarantee that.
-	 */
-	odata = (unsigned char *) PyMem_Malloc(odatalen);
-	if (odata == NULL) {
-		PyBuffer_Release(&pdata);
-		PyErr_NoMemory();
-		return NULL;
-	}
-	memset(odata, 0, odatalen);
+    /* We allocate the output same size as input, this is overkill.
+     * The previous implementation used calloc() so we'll zero out the
+     * memory here too, since PyMem_Malloc() does not guarantee that.
+     */
+    odata = (unsigned char *) PyMem_Malloc(odatalen);
+    if (odata == NULL) {
+        PyBuffer_Release(&pdata);
+        PyErr_NoMemory();
+        return NULL;
+    }
+    memset(odata, 0, odatalen);
 
-	in = out = linelen = 0;
-	while (in < datalen) {
-		if ((data[in] > 126) ||
-		    (data[in] == '=') ||
-		    (header && data[in] == '_') ||
-		    ((data[in] == '.') && (linelen == 0) &&
-		     (data[in+1] == '\n' || data[in+1] == '\r' || data[in+1] == 0)) ||
-		    (!istext && ((data[in] == '\r') || (data[in] == '\n'))) ||
-		    ((data[in] == '\t' || data[in] == ' ') && (in + 1 == datalen)) ||
-		    ((data[in] < 33) &&
-		     (data[in] != '\r') && (data[in] != '\n') &&
-		     (quotetabs ||
-		     	(!quotetabs && ((data[in] != '\t') && (data[in] != ' '))))))
-		{
-			if ((linelen + 3 )>= MAXLINESIZE) {
-				odata[out++] = '=';
-				if (crlf) odata[out++] = '\r';
-				odata[out++] = '\n';
-				linelen = 0;
-			}
-			odata[out++] = '=';
-			to_hex(data[in], &odata[out]);
-			out += 2;
-			in++;
-			linelen += 3;
-		}
-		else {
-		  	if (istext &&
-			    ((data[in] == '\n') ||
-			     ((in+1 < datalen) && (data[in] == '\r') &&
-			     (data[in+1] == '\n'))))
-			{
-			  	linelen = 0;
-				/* Protect against whitespace on end of line */
-				if (out && ((odata[out-1] == ' ') || (odata[out-1] == '\t'))) {
-					ch = odata[out-1];
-					odata[out-1] = '=';
-					to_hex(ch, &odata[out]);
-					out += 2;
-				}
+    in = out = linelen = 0;
+    while (in < datalen) {
+        if ((data[in] > 126) ||
+            (data[in] == '=') ||
+            (header && data[in] == '_') ||
+            ((data[in] == '.') && (linelen == 0) &&
+             (data[in+1] == '\n' || data[in+1] == '\r' || data[in+1] == 0)) ||
+            (!istext && ((data[in] == '\r') || (data[in] == '\n'))) ||
+            ((data[in] == '\t' || data[in] == ' ') && (in + 1 == datalen)) ||
+            ((data[in] < 33) &&
+             (data[in] != '\r') && (data[in] != '\n') &&
+             (quotetabs ||
+            (!quotetabs && ((data[in] != '\t') && (data[in] != ' '))))))
+        {
+            if ((linelen + 3 )>= MAXLINESIZE) {
+                odata[out++] = '=';
+                if (crlf) odata[out++] = '\r';
+                odata[out++] = '\n';
+                linelen = 0;
+            }
+            odata[out++] = '=';
+            to_hex(data[in], &odata[out]);
+            out += 2;
+            in++;
+            linelen += 3;
+        }
+        else {
+            if (istext &&
+                ((data[in] == '\n') ||
+                 ((in+1 < datalen) && (data[in] == '\r') &&
+                 (data[in+1] == '\n'))))
+            {
+                linelen = 0;
+                /* Protect against whitespace on end of line */
+                if (out && ((odata[out-1] == ' ') || (odata[out-1] == '\t'))) {
+                    ch = odata[out-1];
+                    odata[out-1] = '=';
+                    to_hex(ch, &odata[out]);
+                    out += 2;
+                }
 
-				if (crlf) odata[out++] = '\r';
-				odata[out++] = '\n';
-				if (data[in] == '\r')
-					in += 2;
-				else
-					in++;
-			}
-			else {
-				if ((in + 1 != datalen) &&
-				    (data[in+1] != '\n') &&
-				    (linelen + 1) >= MAXLINESIZE) {
-					odata[out++] = '=';
-					if (crlf) odata[out++] = '\r';
-					odata[out++] = '\n';
-					linelen = 0;
-				}
-				linelen++;
-				if (header && data[in] == ' ') {
-					odata[out++] = '_';
-					in++;
-				}
-				else {
-					odata[out++] = data[in++];
-				}
-			}
-		}
-	}
-	if ((rv = PyString_FromStringAndSize((char *)odata, out)) == NULL) {
-		PyBuffer_Release(&pdata);
-		PyMem_Free(odata);
-		return NULL;
-	}
-	PyBuffer_Release(&pdata);
-	PyMem_Free(odata);
-	return rv;
+                if (crlf) odata[out++] = '\r';
+                odata[out++] = '\n';
+                if (data[in] == '\r')
+                    in += 2;
+                else
+                    in++;
+            }
+            else {
+                if ((in + 1 != datalen) &&
+                    (data[in+1] != '\n') &&
+                    (linelen + 1) >= MAXLINESIZE) {
+                    odata[out++] = '=';
+                    if (crlf) odata[out++] = '\r';
+                    odata[out++] = '\n';
+                    linelen = 0;
+                }
+                linelen++;
+                if (header && data[in] == ' ') {
+                    odata[out++] = '_';
+                    in++;
+                }
+                else {
+                    odata[out++] = data[in++];
+                }
+            }
+        }
+    }
+    if ((rv = PyString_FromStringAndSize((char *)odata, out)) == NULL) {
+        PyBuffer_Release(&pdata);
+        PyMem_Free(odata);
+        return NULL;
+    }
+    PyBuffer_Release(&pdata);
+    PyMem_Free(odata);
+    return rv;
 }
 
 /* List of functions defined in the module */
 
 static struct PyMethodDef binascii_module_methods[] = {
-	{"a2b_uu",     binascii_a2b_uu,     METH_VARARGS, doc_a2b_uu},
-	{"b2a_uu",     binascii_b2a_uu,     METH_VARARGS, doc_b2a_uu},
-	{"a2b_base64", binascii_a2b_base64, METH_VARARGS, doc_a2b_base64},
-	{"b2a_base64", binascii_b2a_base64, METH_VARARGS, doc_b2a_base64},
-	{"a2b_hqx",    binascii_a2b_hqx,    METH_VARARGS, doc_a2b_hqx},
-	{"b2a_hqx",    binascii_b2a_hqx,    METH_VARARGS, doc_b2a_hqx},
-	{"b2a_hex",    binascii_hexlify,    METH_VARARGS, doc_hexlify},
-	{"a2b_hex",    binascii_unhexlify,  METH_VARARGS, doc_unhexlify},
-	{"hexlify",    binascii_hexlify,    METH_VARARGS, doc_hexlify},
-	{"unhexlify",  binascii_unhexlify,  METH_VARARGS, doc_unhexlify},
-	{"rlecode_hqx",   binascii_rlecode_hqx, METH_VARARGS, doc_rlecode_hqx},
-	{"rledecode_hqx", binascii_rledecode_hqx, METH_VARARGS,
-	 doc_rledecode_hqx},
-	{"crc_hqx",    binascii_crc_hqx,    METH_VARARGS, doc_crc_hqx},
-	{"crc32",      binascii_crc32,      METH_VARARGS, doc_crc32},
-	{"a2b_qp", (PyCFunction)binascii_a2b_qp, METH_VARARGS | METH_KEYWORDS,
-	  doc_a2b_qp},
-	{"b2a_qp", (PyCFunction)binascii_b2a_qp, METH_VARARGS | METH_KEYWORDS,
-          doc_b2a_qp},
-	{NULL, NULL}			     /* sentinel */
+    {"a2b_uu",     binascii_a2b_uu,     METH_VARARGS, doc_a2b_uu},
+    {"b2a_uu",     binascii_b2a_uu,     METH_VARARGS, doc_b2a_uu},
+    {"a2b_base64", binascii_a2b_base64, METH_VARARGS, doc_a2b_base64},
+    {"b2a_base64", binascii_b2a_base64, METH_VARARGS, doc_b2a_base64},
+    {"a2b_hqx",    binascii_a2b_hqx,    METH_VARARGS, doc_a2b_hqx},
+    {"b2a_hqx",    binascii_b2a_hqx,    METH_VARARGS, doc_b2a_hqx},
+    {"b2a_hex",    binascii_hexlify,    METH_VARARGS, doc_hexlify},
+    {"a2b_hex",    binascii_unhexlify,  METH_VARARGS, doc_unhexlify},
+    {"hexlify",    binascii_hexlify,    METH_VARARGS, doc_hexlify},
+    {"unhexlify",  binascii_unhexlify,  METH_VARARGS, doc_unhexlify},
+    {"rlecode_hqx",   binascii_rlecode_hqx, METH_VARARGS, doc_rlecode_hqx},
+    {"rledecode_hqx", binascii_rledecode_hqx, METH_VARARGS,
+     doc_rledecode_hqx},
+    {"crc_hqx",    binascii_crc_hqx,    METH_VARARGS, doc_crc_hqx},
+    {"crc32",      binascii_crc32,      METH_VARARGS, doc_crc32},
+    {"a2b_qp", (PyCFunction)binascii_a2b_qp, METH_VARARGS | METH_KEYWORDS,
+      doc_a2b_qp},
+    {"b2a_qp", (PyCFunction)binascii_b2a_qp, METH_VARARGS | METH_KEYWORDS,
+      doc_b2a_qp},
+    {NULL, NULL}                             /* sentinel */
 };
 
 
@@ -1512,20 +1512,20 @@
 PyMODINIT_FUNC
 initbinascii(void)
 {
-	PyObject *m, *d, *x;
+    PyObject *m, *d, *x;
 
-	/* Create the module and add the functions */
-	m = Py_InitModule("binascii", binascii_module_methods);
-	if (m == NULL)
-		return;
+    /* Create the module and add the functions */
+    m = Py_InitModule("binascii", binascii_module_methods);
+    if (m == NULL)
+        return;
 
-	d = PyModule_GetDict(m);
-	x = PyString_FromString(doc_binascii);
-	PyDict_SetItemString(d, "__doc__", x);
-	Py_XDECREF(x);
+    d = PyModule_GetDict(m);
+    x = PyString_FromString(doc_binascii);
+    PyDict_SetItemString(d, "__doc__", x);
+    Py_XDECREF(x);
 
-	Error = PyErr_NewException("binascii.Error", NULL, NULL);
-	PyDict_SetItemString(d, "Error", Error);
-	Incomplete = PyErr_NewException("binascii.Incomplete", NULL, NULL);
-	PyDict_SetItemString(d, "Incomplete", Incomplete);
+    Error = PyErr_NewException("binascii.Error", NULL, NULL);
+    PyDict_SetItemString(d, "Error", Error);
+    Incomplete = PyErr_NewException("binascii.Incomplete", NULL, NULL);
+    PyDict_SetItemString(d, "Incomplete", Incomplete);
 }