Doc/whatsnew/3.8.rst

****************************
  What's New In Python 3.8
****************************

.. Rules for maintenance:

   * Anyone can add text to this document.  Do not spend very much time
   on the wording of your changes, because your text will probably
   get rewritten to some degree.

   * The maintainer will go through Misc/NEWS periodically and add
   changes; it's therefore more important to add your changes to
   Misc/NEWS than to this file.

   * This is not a complete list of every single change; completeness
   is the purpose of Misc/NEWS.  Some changes I consider too small
   or esoteric to include.  If such a change is added to the text,
   I'll just remove it.  (This is another reason you shouldn't spend
   too much time on writing your addition.)

   * If you want to draw your new text to the attention of the
   maintainer, add 'XXX' to the beginning of the paragraph or
   section.

   * It's OK to just add a fragmentary note about a change.  For
   example: "XXX Describe the transmogrify() function added to the
   socket module."  The maintainer will research the change and
   write the necessary text.

   * You can comment out your additions if you like, but it's not
   necessary (especially when a final release is some months away).

   * Credit the author of a patch or bugfix.   Just the name is
   sufficient; the e-mail address isn't necessary.

   * It's helpful to add the bug/patch number as a comment:

   XXX Describe the transmogrify() function added to the socket
   module.
   (Contributed by P.Y. Developer in :issue:`12345`.)

   This saves the maintainer the effort of going through the Mercurial log
   when researching a change.

This article explains the new features in Python 3.8, compared to 3.7.

For full details, see the :ref:`changelog <changelog>`.

.. note::

   Prerelease users should be aware that this document is currently in draft
   form. It will be updated substantially as Python 3.8 moves towards release,
   so it's worth checking back even after reading earlier versions.


Summary -- Release highlights
=============================

.. This section singles out the most important changes in Python 3.8.
   Brevity is key.


.. PEP-sized items next.



New Features
============

Assignment expressions
----------------------

There is new syntax (the "walrus operator", ``:=``) to assign values
to variables as part of an expression.  Example::

  if (n := len(a)) > 10:
      print(f"List is too long ({n} elements, expected <= 10)")

See :pep:`572` for a full description.

(Contributed by Emily Morehouse in :issue:`35224`.)

.. TODO: Emily will sprint on docs at PyCon US 2019.


Positional-only parameters
--------------------------

There is new syntax (``/``) to indicate that some function parameters
must be specified positionally (i.e., cannot be used as keyword
arguments).  This is the same notation as shown by ``help()`` for
functions implemented in C (produced by Larry Hastings' "Argument
Clinic" tool).  Example::

  def pow(x, y, z=None, /):
      r = x**y
      if z is not None:
          r %= z
      return r

Now ``pow(2, 10)`` and ``pow(2, 10, 17)`` are valid calls, but
``pow(x=2, y=10)`` and ``pow(2, 10, z=17)`` are invalid.

See :pep:`570` for a full description.

(Contributed by Pablo Galindo in :issue:`36540`.)

.. TODO: Pablo will sprint on docs at PyCon US 2019.


Parallel filesystem cache for compiled bytecode files
-----------------------------------------------------

The new :envvar:`PYTHONPYCACHEPREFIX` setting (also available as
:option:`-X` ``pycache_prefix``) configures the implicit bytecode
cache to use a separate parallel filesystem tree, rather than
the default ``__pycache__`` subdirectories within each source
directory.

The location of the cache is reported in :data:`sys.pycache_prefix`
(:const:`None` indicates the default location in ``__pycache__``
subdirectories).

(Contributed by Carl Meyer in :issue:`33499`.)

Debug build uses the same ABI as release build
-----------------------------------------------

Python now uses the same ABI whether it built in release or debug mode. On
Unix, when Python is built in debug mode, it is now possible to load C
extensions built in release mode and C extensions built using the stable ABI.

Release builds and debug builds are now ABI compatible: defining the
``Py_DEBUG`` macro no longer implies the ``Py_TRACE_REFS`` macro, which
introduces the only ABI incompatibility. The ``Py_TRACE_REFS`` macro, which
adds the :func:`sys.getobjects` function and the :envvar:`PYTHONDUMPREFS`
environment variable, can be set using the new ``./configure --with-trace-refs``
build option.
(Contributed by Victor Stinner in :issue:`36465`.)

On Unix, C extensions are no longer linked to libpython except on Android
and Cygwin.
It is now possible
for a statically linked Python to load a C extension built using a shared
library Python.
(Contributed by Victor Stinner in :issue:`21536`.)

On Unix, when Python is built in debug mode, import now also looks for C
extensions compiled in release mode and for C extensions compiled with the
stable ABI.
(Contributed by Victor Stinner in :issue:`36722`.)

To embed Python into an application, a new ``--embed`` option must be passed to
``python3-config --libs --embed`` to get ``-lpython3.8`` (link the application
to libpython). To support both 3.8 and older, try ``python3-config --libs
--embed`` first and fallback to ``python3-config --libs`` (without ``--embed``)
if the previous command fails.

Add a pkg-config ``python-3.8-embed`` module to embed Python into an
application: ``pkg-config python-3.8-embed --libs`` includes ``-lpython3.8``.
To support both 3.8 and older, try ``pkg-config python-X.Y-embed --libs`` first
and fallback to ``pkg-config python-X.Y --libs`` (without ``--embed``) if the
previous command fails (replace ``X.Y`` with the Python version).

On the other hand, ``pkg-config python3.8 --libs`` no longer contains
``-lpython3.8``. C extensions must not be linked to libpython (except on
Android and Cygwin, whose cases are handled by the script);
this change is backward incompatible on purpose.
(Contributed by Victor Stinner in :issue:`36721`.)

f-strings now support =  for quick and easy debugging
-----------------------------------------------------

Add ``=`` specifier to f-strings. ``f'{expr=}'`` expands
to the text of the expression, an equal sign, then the repr of the
evaluated expression.  So::

  x = 3
  print(f'{x*9 + 15=}')

Would print ``x*9 + 15=42``.

(Contributed by Eric V. Smith and Larry Hastings in :issue:`36817`.)

PEP 587: Python Initialization Configuration
--------------------------------------------

The :pep:`587` adds a new C API to configure the Python Initialization
providing finer control on the whole configuration and better error reporting.

New structures:

* :c:type:`PyConfig`
* :c:type:`PyPreConfig`
* :c:type:`PyStatus`
* :c:type:`PyWideStringList`

New functions:

* :c:func:`PyConfig_Clear`
* :c:func:`PyConfig_InitIsolatedConfig`
* :c:func:`PyConfig_InitPythonConfig`
* :c:func:`PyConfig_Read`
* :c:func:`PyConfig_SetArgv`
* :c:func:`PyConfig_SetBytesArgv`
* :c:func:`PyConfig_SetBytesString`
* :c:func:`PyConfig_SetString`
* :c:func:`PyPreConfig_InitIsolatedConfig`
* :c:func:`PyPreConfig_InitPythonConfig`
* :c:func:`PyStatus_Error`
* :c:func:`PyStatus_Exception`
* :c:func:`PyStatus_Exit`
* :c:func:`PyStatus_IsError`
* :c:func:`PyStatus_IsExit`
* :c:func:`PyStatus_NoMemory`
* :c:func:`PyStatus_Ok`
* :c:func:`PyWideStringList_Append`
* :c:func:`PyWideStringList_Insert`
* :c:func:`Py_BytesMain`
* :c:func:`Py_ExitStatusException`
* :c:func:`Py_InitializeFromConfig`
* :c:func:`Py_PreInitialize`
* :c:func:`Py_PreInitializeFromArgs`
* :c:func:`Py_PreInitializeFromBytesArgs`
* :c:func:`Py_RunMain`

This PEP also adds ``_PyRuntimeState.preconfig`` (:c:type:`PyPreConfig` type)
and ``PyInterpreterState.config`` (:c:type:`PyConfig` type) fields to these
internal structures. ``PyInterpreterState.config`` becomes the new
reference configuration, replacing global configuration variables and
other private variables.

See :ref:`Python Initialization Configuration <init-config>` for the
documentation.

See :pep:`587` for a full description.

(Contributed by Victor Stinner in :issue:`36763`.)


Other Language Changes
======================

* A :keyword:`continue` statement was illegal in the :keyword:`finally` clause
  due to a problem with the implementation.  In Python 3.8 this restriction
  was lifted.
  (Contributed by Serhiy Storchaka in :issue:`32489`.)

* The :class:`int` type now has a new :meth:`~int.as_integer_ratio` method
  compatible with the existing :meth:`float.as_integer_ratio` method.
  (Contributed by Lisa Roach in :issue:`33073`.)

* Added support of ``\N{name}`` escapes in :mod:`regular expressions <re>`.
  (Contributed by Jonathan Eunice and Serhiy Storchaka in :issue:`30688`.)

* Dict and dictviews are now iterable in reversed insertion order using
  :func:`reversed`. (Contributed by Rémi Lapeyre in :issue:`33462`.)

* The syntax allowed for keyword names in function calls was further
  restricted. In particular, ``f((keyword)=arg)`` is no longer allowed. It was
  never intended to permit more than a bare name on the left-hand side of a
  keyword argument assignment term. See :issue:`34641`.

* Iterable unpacking is now allowed without parentheses in :keyword:`yield`
  and :keyword:`return` statements.
  (Contributed by David Cuthbert and Jordan Chapman in :issue:`32117`.)

* A backslash-character pair that is not a valid escape sequence generates
  a :exc:`DeprecationWarning` since Python 3.6. In Python 3.8 it generates
  a :exc:`SyntaxWarning` instead.
  (Contributed by Serhiy Storchaka in :issue:`32912`.)

* The compiler now produces a :exc:`SyntaxWarning` in some cases when a comma
  is missed before tuple or list.  For example::

     data = [
         (1, 2, 3) # oops, missing comma!
         (4, 5, 6)
     ]

  (Contributed by Serhiy Storchaka in :issue:`15248`.)

* Arithmetic operations between subclasses of :class:`datetime.date` or
  :class:`datetime.datetime` and :class:`datetime.timedelta` objects now return
  an instance of the subclass, rather than the base class. This also affects
  the return type of operations whose implementation (directly or indirectly)
  uses :class:`datetime.timedelta` arithmetic, such as
  :meth:`datetime.datetime.astimezone`.
  (Contributed by Paul Ganssle in :issue:`32417`.)

* When the Python interpreter is interrupted by Ctrl-C (SIGINT) and the
  resulting :exc:`KeyboardInterrupt` exception is not caught, the Python process
  now exits via a SIGINT signal or with the correct exit code such that the
  calling process can detect that it died due to a Ctrl-C.  Shells on POSIX
  and Windows use this to properly terminate scripts in interactive sessions.
  (Contributed by Google via Gregory P. Smith in :issue:`1054041`.)

* Added new ``replace()`` method to the code type (:class:`types.CodeType`).
  (Contributed by Victor Stinner in :issue:`37032`.)


New Modules
===========

* None yet.


Improved Modules
================


asyncio
-------

On Windows, the default event loop is now :class:`~asyncio.ProactorEventLoop`.

builtins
--------

The :func:`compile` built-in has been improved to accept the
``ast.PyCF_ALLOW_TOP_LEVEL_AWAIT`` flag. With this new flag passed,
:func:`compile` will allow top-level ``await``, ``async for`` and ``async with``
constructs that are usually considered invalid syntax. Asynchronous code object
marked with the ``CO_COROUTINE`` flag may then be returned.

(Contributed by Matthias Bussonnier in :issue:`34616`)

collections
-----------

The :meth:`_asdict()` method for :func:`collections.namedtuple` now returns
a :class:`dict` instead of a :class:`collections.OrderedDict`. This works because
regular dicts have guaranteed ordering since Python 3.7. If the extra
features of :class:`OrderedDict` are required, the suggested remediation is
to cast the result to the desired type: ``OrderedDict(nt._asdict())``.
(Contributed by Raymond Hettinger in :issue:`35864`.)


ctypes
------

On Windows, :class:`~ctypes.CDLL` and subclasses now accept a *winmode* parameter
to specify flags for the underlying ``LoadLibraryEx`` call. The default flags are
set to only load DLL dependencies from trusted locations, including the path
where the DLL is stored (if a full or partial path is used to load the initial
DLL) and paths added by :func:`~os.add_dll_directory`.


functools
---------

:func:`functools.lru_cache` can now be used as a straight decorator rather
than as a function returning a decorator.  So both of these are now supported::

    @lru_cache
    def f(x):
        ...

    @lru_cache(maxsize=256)
    def f(x):
        ...

(Contributed by Raymond Hettinger in :issue:`36772`.)


datetime
--------

Added new alternate constructors :meth:`datetime.date.fromisocalendar` and
:meth:`datetime.datetime.fromisocalendar`, which construct :class:`date` and
:class:`datetime` objects respectively from ISO year, week number and weekday;
these are the inverse of each class's ``isocalendar`` method.
(Contributed by Paul Ganssle in :issue:`36004`.)


gettext
-------

Added :func:`~gettext.pgettext` and its variants.
(Contributed by Franz Glasner, Éric Araujo, and Cheryl Sabella in :issue:`2504`.)

inspect
-------

The :func:`inspect.getdoc` function can now find docstrings for ``__slots__``
if that attribute is a :class:`dict` where the values are docstrings.
This provides documentation options similar to what we already have
for :func:`property`, :func:`classmethod`, and :func:`staticmethod`::

  class AudioClip:
      __slots__ = {'bit_rate': 'expressed in kilohertz to one decimal place',
                   'duration': 'in seconds, rounded up to an integer'}
      def __init__(self, bit_rate, duration):
          self.bit_rate = round(bit_rate / 1000.0, 1)
          self.duration = ceil(duration)

io
--

In development mode (:option:`-X` ``env``) and in debug build, the
:class:`io.IOBase` finalizer now logs the exception if the ``close()`` method
fails. The exception is ignored silently by default in release build.
(Contributed by Victor Stinner in :issue:`18748`.)


gc
--

:func:`~gc.get_objects` can now receive an optional *generation* parameter
indicating a generation to get objects from. Contributed in
:issue:`36016` by Pablo Galindo.


gzip
----

Added the *mtime* parameter to :func:`gzip.compress` for reproducible output.
(Contributed by Guo Ci Teo in :issue:`34898`.)

A :exc:`~gzip.BadGzipFile` exception is now raised instead of :exc:`OSError`
for certain types of invalid or corrupt gzip files.
(Contributed by Filip Gruszczyński, Michele Orrù, and Zackery Spytz in
:issue:`6584`.)


idlelib and IDLE
----------------

Output over N lines (50 by default) is squeezed down to a button.
N can be changed in the PyShell section of the General page of the
Settings dialog.  Fewer, but possibly extra long, lines can be squeezed by
right clicking on the output.  Squeezed output can be expanded in place
by double-clicking the button or into the clipboard or a separate window
by right-clicking the button.  (Contributed by Tal Einat in :issue:`1529353`.)

The changes above have been backported to 3.7 maintenance releases.


json.tool
---------

Add option ``--json-lines`` to parse every input line as separate JSON object.
(Contributed by Weipeng Hong in :issue:`31553`.)


math
----

Added new function :func:`math.dist` for computing Euclidean distance
between two points.  (Contributed by Raymond Hettinger in :issue:`33089`.)

Expanded the :func:`math.hypot` function to handle multiple dimensions.
Formerly, it only supported the 2-D case.
(Contributed by Raymond Hettinger in :issue:`33089`.)

Added new function, :func:`math.prod`, as analogous function to :func:`sum`
that returns the product of a 'start' value (default: 1) times an iterable of
numbers. (Contributed by Pablo Galindo in :issue:`35606`)

Added new function :func:`math.isqrt` for computing integer square roots.
(Contributed by Mark Dickinson in :issue:`36887`.)


mmap
----

The :class:`mmap.mmap` class now has an :meth:`~mmap.mmap.madvise` method to
access the ``madvise()`` system call.
(Contributed by Zackery Spytz in :issue:`32941`.)


multiprocessing
---------------

Added new :mod:`multiprocessing.shared_memory` module.
(Contributed Davin Potts in :issue:`35813`.)

On macOS, the *spawn* start method is now used by default.
(Contributed by Victor Stinner in :issue:`33725`.)


os
--

Added new function :func:`~os.add_dll_directory` on Windows for providing
additional search paths for native dependencies when importing extension
modules or loading DLLs using :mod:`ctypes`.


os.path
-------

:mod:`os.path` functions that return a boolean result like
:func:`~os.path.exists`, :func:`~os.path.lexists`, :func:`~os.path.isdir`,
:func:`~os.path.isfile`, :func:`~os.path.islink`, and :func:`~os.path.ismount`
now return ``False`` instead of raising :exc:`ValueError` or its subclasses
:exc:`UnicodeEncodeError` and :exc:`UnicodeDecodeError` for paths that contain
characters or bytes unrepresentable at the OS level.
(Contributed by Serhiy Storchaka in :issue:`33721`.)

:func:`~os.path.expanduser` on Windows now prefers the :envvar:`USERPROFILE`
environment variable and does not use :envvar:`HOME`, which is not normally set
for regular user accounts.


ncurses
-------

Added a new variable holding structured version information for the
underlying ncurses library: :data:`~curses.ncurses_version`.
(Contributed by Serhiy Storchaka in :issue:`31680`.)


pathlib
-------

:mod:`pathlib.Path` methods that return a boolean result like
:meth:`~pathlib.Path.exists()`, :meth:`~pathlib.Path.is_dir()`,
:meth:`~pathlib.Path.is_file()`, :meth:`~pathlib.Path.is_mount()`,
:meth:`~pathlib.Path.is_symlink()`, :meth:`~pathlib.Path.is_block_device()`,
:meth:`~pathlib.Path.is_char_device()`, :meth:`~pathlib.Path.is_fifo()`,
:meth:`~pathlib.Path.is_socket()` now return ``False`` instead of raising
:exc:`ValueError` or its subclass :exc:`UnicodeEncodeError` for paths that
contain characters unrepresentable at the OS level.
(Contributed by Serhiy Storchaka in :issue:`33721`.)

Added :meth:`pathlib.Path.link_to()` which creates a hard link pointing
to a path.
(Contributed by Joannah Nanjekye in :issue:`26978`)


plistlib
--------

Added new :class:`plistlib.UID` and enabled support for reading and writing
NSKeyedArchiver-encoded binary plists.
(Contributed by Jon Janzen in :issue:`26707`.)


py_compile
----------

:func:`py_compile.compile` now supports silent mode.
(Contributed by Joannah Nanjekye in :issue:`22640`.)


socket
------

Added :meth:`~socket.create_server()` and :meth:`~socket.has_dualstack_ipv6()`
convenience functions to automate the necessary tasks usually involved when
creating a server socket, including accepting both IPv4 and IPv6 connections
on the same socket.  (Contributed by Giampaolo Rodola in :issue:`17561`.)

shlex
----------

The new :func:`shlex.join` function acts as the inverse of :func:`shlex.split`.
(Contributed by Bo Bayles in :issue:`32102`.)

shutil
------

:func:`shutil.copytree` now accepts a new ``dirs_exist_ok`` keyword argument.
(Contributed by Josh Bronson in :issue:`20849`.)

:func:`shutil.make_archive` now defaults to the modern pax (POSIX.1-2001)
format for new archives to improve portability and standards conformance,
inherited from the corresponding change to the :mod:`tarfile` module.
(Contributed by C.A.M. Gerlach in :issue:`30661`.)


ssl
---

Added :attr:`SSLContext.post_handshake_auth` to enable and
:meth:`ssl.SSLSocket.verify_client_post_handshake` to initiate TLS 1.3
post-handshake authentication.
(Contributed by Christian Heimes in :issue:`34670`.)


statistics
----------

Added :func:`statistics.fmean` as a faster, floating point variant of
:func:`statistics.mean()`.  (Contributed by Raymond Hettinger and
Steven D'Aprano in :issue:`35904`.)

Added :func:`statistics.geometric_mean()`
(Contributed by Raymond Hettinger in :issue:`27181`.)

Added :func:`statistics.multimode` that returns a list of the most
common values. (Contributed by Raymond Hettinger in :issue:`35892`.)

Added :func:`statistics.quantiles` that divides data or a distribution
in to equiprobable intervals (e.g. quartiles, deciles, or percentiles).
(Contributed by Raymond Hettinger in :issue:`36546`.)

Added :class:`statistics.NormalDist`, a tool for creating
and manipulating normal distributions of a random variable.
(Contributed by Raymond Hettinger in :issue:`36018`.)

::

    >>> temperature_feb = NormalDist.from_samples([4, 12, -3, 2, 7, 14])
    >>> temperature_feb.mean
    6.0
    >>> temperature_feb.stdev
    6.356099432828281

    >>> temperature_feb.cdf(3)            # Chance of being under 3 degrees
    0.3184678262814532
    >>> # Relative chance of being 7 degrees versus 10 degrees
    >>> temperature_feb.pdf(7) / temperature_feb.pdf(10)
    1.2039930378537762

    >>> el_niño = NormalDist(4, 2.5)
    >>> temperature_feb += el_niño        # Add in a climate effect
    >>> temperature_feb
    NormalDist(mu=10.0, sigma=6.830080526611674)

    >>> temperature_feb * (9/5) + 32      # Convert to Fahrenheit
    NormalDist(mu=50.0, sigma=12.294144947901014)
    >>> temperature_feb.samples(3)        # Generate random samples
    [7.672102882379219, 12.000027119750287, 4.647488369766392]


sys
---

Add new :func:`sys.unraisablehook` function which can be overridden to control
how "unraisable exceptions" are handled. It is called when an exception has
occurred but there is no way for Python to handle it. For example, when a
destructor raises an exception or during garbage collection
(:func:`gc.collect`).


tarfile
-------

The :mod:`tarfile` module now defaults to the modern pax (POSIX.1-2001)
format for new archives, instead of the previous GNU-specific one.
This improves cross-platform portability with a consistent encoding (UTF-8)
in a standardized and extensible format, and offers several other benefits.
(Contributed by C.A.M. Gerlach in :issue:`36268`.)


threading
---------

Add a new :func:`threading.excepthook` function which handles uncaught
:meth:`threading.Thread.run` exception. It can be overridden to control how
uncaught :meth:`threading.Thread.run` exceptions are handled.
(Contributed by Victor Stinner in :issue:`1230540`.)


tokenize
--------

The :mod:`tokenize` module now implicitly emits a ``NEWLINE`` token when
provided with input that does not have a trailing new line.  This behavior
now matches what the C tokenizer does internally.
(Contributed by Ammar Askar in :issue:`33899`.)

tkinter
-------

Added methods :meth:`~tkinter.Spinbox.selection_from`,
:meth:`~tkinter.Spinbox.selection_present`,
:meth:`~tkinter.Spinbox.selection_range` and
:meth:`~tkinter.Spinbox.selection_to`
in the :class:`tkinter.Spinbox` class.
(Contributed by Juliette Monsel in :issue:`34829`.)

Added method :meth:`~tkinter.Canvas.moveto`
in the :class:`tkinter.Canvas` class.
(Contributed by Juliette Monsel in :issue:`23831`.)

The :class:`tkinter.PhotoImage` class now has
:meth:`~tkinter.PhotoImage.transparency_get` and
:meth:`~tkinter.PhotoImage.transparency_set` methods.  (Contributed by
Zackery Spytz in :issue:`25451`.)

time
----

Added new clock :data:`~time.CLOCK_UPTIME_RAW` for macOS 10.12.
(Contributed by Joannah Nanjekye in :issue:`35702`.)

unicodedata
-----------

* The :mod:`unicodedata` module has been upgraded to use the `Unicode 12.1.0
  <http://blog.unicode.org/2019/05/unicode-12-1-en.html>`_ release.

* New function :func:`~unicodedata.is_normalized` can be used to verify a string
  is in a specific normal form. (Contributed by Max Belanger and David Euresti in
  :issue:`32285`).


unittest
--------

* XXX Added :class:`AsyncMock` to support an asynchronous version of :class:`Mock`.
  Appropriate new assert functions for testing have been added as well.
  (Contributed by Lisa Roach in :issue:`26467`).

* Added :func:`~unittest.addModuleCleanup()` and
  :meth:`~unittest.TestCase.addClassCleanup()` to unittest to support
  cleanups for :func:`~unittest.setUpModule()` and
  :meth:`~unittest.TestCase.setUpClass()`.
  (Contributed by Lisa Roach in :issue:`24412`.)

venv
----

* :mod:`venv` now includes an ``Activate.ps1`` script on all platforms for
  activating virtual environments under PowerShell Core 6.1.
  (Contributed by Brett Cannon in :issue:`32718`.)

weakref
-------

* The proxy objects returned by :func:`weakref.proxy` now support the matrix
  multiplication operators ``@`` and ``@=`` in addition to the other
  numeric operators. (Contributed by Mark Dickinson in :issue:`36669`.)

xml
---

* As mitigation against DTD and external entity retrieval, the
  :mod:`xml.dom.minidom` and :mod:`xml.sax` modules no longer process
  external entities by default.
  (Contributed by Christian Heimes in :issue:`17239`.)

* The ``.find*()`` methods in the :mod:`xml.etree.ElementTree` module
  support wildcard searches like ``{*}tag`` which ignores the namespace
  and ``{namespace}*`` which returns all tags in the given namespace.
  (Contributed by Stefan Behnel in :issue:`28238`.)

* The :mod:`xml.etree.ElementTree` module provides a new function
  :func:`–xml.etree.ElementTree.canonicalize()` that implements C14N 2.0.
  (Contributed by Stefan Behnel in :issue:`13611`.)

* The target object of :class:`xml.etree.ElementTree.XMLParser` can
  receive namespace declaration events through the new callback methods
  ``start_ns()`` and ``end_ns()``.  Additionally, the
  :class:`xml.etree.ElementTree.TreeBuilder` target can be configured
  to process events about comments and processing instructions to include
  them in the generated tree.
  (Contributed by Stefan Behnel in :issue:`36676` and :issue:`36673`.)

Optimizations
=============

* The :mod:`subprocess` module can now use the :func:`os.posix_spawn` function
  in some cases for better performance. Currently, it is only used on macOS
  and Linux (using glibc 2.24 or newer) if all these conditions are met:

  * *close_fds* is false;
  * *preexec_fn*, *pass_fds*, *cwd* and *start_new_session* parameters
    are not set;
  * the *executable* path contains a directory.

* :func:`shutil.copyfile`, :func:`shutil.copy`, :func:`shutil.copy2`,
  :func:`shutil.copytree` and :func:`shutil.move` use platform-specific
  "fast-copy" syscalls on Linux, macOS and Solaris in order to copy the file
  more efficiently.
  "fast-copy" means that the copying operation occurs within the kernel,
  avoiding the use of userspace buffers in Python as in
  "``outfd.write(infd.read())``".
  On Windows :func:`shutil.copyfile` uses a bigger default buffer size (1 MiB
  instead of 16 KiB) and a :func:`memoryview`-based variant of
  :func:`shutil.copyfileobj` is used.
  The speedup for copying a 512 MiB file within the same partition is about
  +26% on Linux, +50% on macOS and +40% on Windows. Also, much less CPU cycles
  are consumed.
  See :ref:`shutil-platform-dependent-efficient-copy-operations` section.
  (Contributed by Giampaolo Rodola' in :issue:`33671`.)

* :func:`shutil.copytree` uses :func:`os.scandir` function and all copy
  functions depending from it use cached :func:`os.stat` values. The speedup
  for copying a directory with 8000 files is around +9% on Linux, +20% on
  Windows and +30% on a Windows SMB share. Also the number of :func:`os.stat`
  syscalls is reduced by 38% making :func:`shutil.copytree` especially faster
  on network filesystems. (Contributed by Giampaolo Rodola' in :issue:`33695`.)

* The default protocol in the :mod:`pickle` module is now Protocol 4,
  first introduced in Python 3.4.  It offers better performance and smaller
  size compared to Protocol 3 available since Python 3.0.

* Removed one ``Py_ssize_t`` member from ``PyGC_Head``.  All GC tracked
  objects (e.g. tuple, list, dict) size is reduced 4 or 8 bytes.
  (Contributed by Inada Naoki in :issue:`33597`)

* :class:`uuid.UUID` now uses ``__slots__`` to reduce its memory footprint.

* Improved performance of :func:`operator.itemgetter` by 33%.  Optimized
  argument handling and added a fast path for the common case of a single
  non-negative integer index into a tuple (which is the typical use case in
  the standard library).  (Contributed by Raymond Hettinger in
  :issue:`35664`.)

* Sped-up field lookups in :func:`collections.namedtuple`.  They are now more
  than two times faster, making them the fastest form of instance variable
  lookup in Python. (Contributed by Raymond Hettinger, Pablo Galindo, and
  Joe Jevnik, Serhiy Storchaka in :issue:`32492`.)

* The :class:`list` constructor does not overallocate the internal item buffer
  if the input iterable has a known length (the input implements ``__len__``).
  This makes the created list 12% smaller on average. (Contributed by
  Raymond Hettinger and Pablo Galindo in :issue:`33234`.)

* Doubled the speed of class variable writes.  When a non-dunder attribute
  was updated, there was an unnecessary call to update slots.
  (Contributed by Stefan Behnel, Pablo Galindo Salgado, Raymond Hettinger,
  Neil Schemenauer, and Serhiy Storchaka in :issue:`36012`.)

* Reduced an overhead of converting arguments passed to many builtin functions
  and methods.  This sped up calling some simple builtin functions and
  methods up to 20--50%.  (Contributed by Serhiy Storchaka in :issue:`23867`,
  :issue:`35582` and :issue:`36127`.)


Build and C API Changes
=======================

* The :c:func:`PyByteArray_Init` and :c:func:`PyByteArray_Fini` functions have
  been removed. They did nothing since Python 2.7.4 and Python 3.2.0, were
  excluded from the limited API (stable ABI), and were not documented.

* The result of :c:func:`PyExceptionClass_Name` is now of type
  ``const char *`` rather of ``char *``.
  (Contributed by Serhiy Storchaka in :issue:`33818`.)

* The duality of ``Modules/Setup.dist`` and ``Modules/Setup`` has been
  removed.  Previously, when updating the CPython source tree, one had
  to manually copy ``Modules/Setup.dist`` (inside the source tree) to
  ``Modules/Setup`` (inside the build tree) in order to reflect any changes
  upstream.  This was of a small benefit to packagers at the expense of
  a frequent annoyance to developers following CPython development, as
  forgetting to copy the file could produce build failures.

  Now the build system always reads from ``Modules/Setup`` inside the source
  tree.  People who want to customize that file are encouraged to maintain
  their changes in a git fork of CPython or as patch files, as they would do
  for any other change to the source tree.

  (Contributed by Antoine Pitrou in :issue:`32430`.)

* Functions that convert Python number to C integer like
  :c:func:`PyLong_AsLong` and argument parsing functions like
  :c:func:`PyArg_ParseTuple` with integer converting format units like ``'i'``
  will now use the :meth:`~object.__index__` special method instead of
  :meth:`~object.__int__`, if available.  The deprecation warning will be
  emitted for objects with the ``__int__()`` method but without the
  ``__index__()`` method (like :class:`~decimal.Decimal` and
  :class:`~fractions.Fraction`).  :c:func:`PyNumber_Check` will now return
  ``1`` for objects implementing ``__index__()``.
  (Contributed by Serhiy Storchaka in :issue:`36048`.)

* Heap-allocated type objects will now increase their reference count
  in :c:func:`PyObject_Init` (and its parallel macro ``PyObject_INIT``)
  instead of in :c:func:`PyType_GenericAlloc`. Types that modify instance
  allocation or deallocation may need to be adjusted.
  (Contributed by Eddie Elizondo in :issue:`35810`.)


Deprecated
==========

* Deprecated methods ``getchildren()`` and ``getiterator()`` in
  the :mod:`~xml.etree.ElementTree` module emit now a
  :exc:`DeprecationWarning` instead of :exc:`PendingDeprecationWarning`.
  They will be removed in Python 3.9.
  (Contributed by Serhiy Storchaka in :issue:`29209`.)

* Passing an object that is not an instance of
  :class:`concurrent.futures.ThreadPoolExecutor` to
  :meth:`asyncio.loop.set_default_executor()` is
  deprecated and will be prohibited in Python 3.9.
  (Contributed by Elvis Pranskevichus in :issue:`34075`.)

* The :meth:`__getitem__` methods of :class:`xml.dom.pulldom.DOMEventStream`,
  :class:`wsgiref.util.FileWrapper` and :class:`fileinput.FileInput` have been
  deprecated.

  Implementations of these methods have been ignoring their *index* parameter,
  and returning the next item instead.

  (Contributed by Berker Peksag in :issue:`9372`.)

* The :class:`typing.NamedTuple` class has deprecated the ``_field_types``
  attribute in favor of the ``__annotations__`` attribute which has the same
  information.  (Contributed by Raymond Hettinger in :issue:`36320`.)

* :mod:`ast` classes ``Num``, ``Str``, ``Bytes``, ``NameConstant`` and
  ``Ellipsis`` are considered deprecated and will be removed in future Python
  versions. :class:`~ast.Constant` should be used instead.
  (Contributed by Serhiy Storchaka in :issue:`32892`.)

* The following functions and methods are deprecated in the :mod:`gettext`
  module: :func:`~gettext.lgettext`, :func:`~gettext.ldgettext`,
  :func:`~gettext.lngettext` and :func:`~gettext.ldngettext`.
  They return encoded bytes, and it's possible that you will get unexpected
  Unicode-related exceptions if there are encoding problems with the
  translated strings. It's much better to use alternatives which return
  Unicode strings in Python 3. These functions have been broken for a long time.

  Function :func:`~gettext.bind_textdomain_codeset`, methods
  :meth:`~gettext.NullTranslations.output_charset` and
  :meth:`~gettext.NullTranslations.set_output_charset`, and the *codeset*
  parameter of functions :func:`~gettext.translation` and
  :func:`~gettext.install` are also deprecated, since they are only used for
  for the ``l*gettext()`` functions.

  (Contributed by Serhiy Storchaka in :issue:`33710`.)

* The :meth:`~threading.Thread.isAlive()` method of :class:`threading.Thread` has been deprecated.
  (Contributed by Dong-hee Na in :issue:`35283`.)

* Many builtin and extension functions that take integer arguments will
  now emit a deprecation warning for :class:`~decimal.Decimal`\ s,
  :class:`~fractions.Fraction`\ s and any other objects that can be converted
  to integers only with a loss (e.g. that have the :meth:`~object.__int__`
  method but do not have the :meth:`~object.__index__` method).  In future
  version they will be errors.
  (Contributed by Serhiy Storchaka in :issue:`36048`.)

* Deprecated passing the following arguments as keyword arguments:

  - *func* in :func:`functools.partialmethod`, :func:`weakref.finalize`,
    :meth:`profile.Profile.runcall`, :meth:`cProfile.Profile.runcall`,
    :meth:`bdb.Bdb.runcall`, :meth:`trace.Trace.runfunc` and
    :func:`curses.wrapper`.
  - *function* in :func:`unittest.addModuleCleanup` and
    :meth:`unittest.TestCase.addCleanup`.
  - *fn* in the :meth:`~concurrent.futures.Executor.submit` method of
    :class:`concurrent.futures.ThreadPoolExecutor` and
    :class:`concurrent.futures.ProcessPoolExecutor`.
  - *callback* in :meth:`contextlib.ExitStack.callback`,
    :meth:`contextlib.AsyncExitStack.callback` and
    :meth:`contextlib.AsyncExitStack.push_async_callback`.
  - *c* and *typeid* in the :meth:`~multiprocessing.managers.Server.create`
    method of :class:`multiprocessing.managers.Server` and
    :class:`multiprocessing.managers.SharedMemoryServer`.
  - *obj* in :func:`weakref.finalize`.

  In future releases of Python they will be :ref:`positional-only
  <positional-only_parameter>`.
  (Contributed by Serhiy Storchaka in :issue:`36492`.)


API and Feature Removals
========================

The following features and APIs have been removed from Python 3.8:

* The :mod:`macpath` module, deprecated in Python 3.7, has been removed.
  (Contributed by Victor Stinner in :issue:`35471`.)

* The function :func:`platform.popen` has been removed, it was deprecated since
  Python 3.3: use :func:`os.popen` instead.

* The function :func:`time.clock` has been removed, it was deprecated since Python
  3.3: use :func:`time.perf_counter` or :func:`time.process_time` instead, depending
  on your requirements, to have a well defined behavior.

* The ``pyvenv`` script has been removed in favor of ``python3.8 -m venv``
  to help eliminate confusion as to what Python interpreter the ``pyvenv``
  script is tied to. (Contributed by Brett Cannon in :issue:`25427`.)

* ``parse_qs``, ``parse_qsl``, and ``escape`` are removed from :mod:`cgi`
  module.  They are deprecated from Python 3.2 or older.

* ``filemode`` function is removed from :mod:`tarfile` module.
  It is not documented and deprecated since Python 3.3.

* The :class:`~xml.etree.ElementTree.XMLParser` constructor no longer accepts
  the *html* argument.  It never had effect and was deprecated in Python 3.4.
  All other parameters are now :ref:`keyword-only <keyword-only_parameter>`.
  (Contributed by Serhiy Storchaka in :issue:`29209`.)

* Removed the ``doctype()`` method of :class:`~xml.etree.ElementTree.XMLParser`.
  (Contributed by Serhiy Storchaka in :issue:`29209`.)

* "unicode_internal" codec is removed.
  (Contributed by Inada Naoki in :issue:`36297`.)

* The ``Cache`` and ``Statement`` objects of the :mod:`sqlite3` module are not
  exposed to the user.
  (Contributed by Aviv Palivoda in :issue:`30262`.)

* The ``bufsize`` keyword argument of :func:`fileinput.input` and
  :func:`fileinput.FileInput` which was ignored and deprecated since Python 3.6
  has been removed. :issue:`36952` (Contributed by Matthias Bussonnier)

* The functions :func:`sys.set_coroutine_wrapper` and
  :func:`sys.get_coroutine_wrapper` deprecated in Python 3.7 have been removed;
  :issue:`36933` (Contributed by Matthias Bussonnier)


Porting to Python 3.8
=====================

This section lists previously described changes and other bugfixes
that may require changes to your code.


Changes in Python behavior
--------------------------

* Yield expressions (both ``yield`` and ``yield from`` clauses) are now disallowed
  in comprehensions and generator expressions (aside from the iterable expression
  in the leftmost :keyword:`!for` clause).
  (Contributed by Serhiy Storchaka in :issue:`10544`.)

* The compiler now produces a :exc:`SyntaxWarning` when identity checks
  (``is`` and ``is not``) are used with certain types of literals
  (e.g. strings, ints).  These can often work by accident in CPython,
  but are not guaranteed by the language spec.  The warning advises users
  to use equality tests (``==`` and ``!=``) instead.
  (Contributed by Serhiy Storchaka in :issue:`34850`.)

* The CPython interpreter can swallow exceptions in some circumstances.
  In Python 3.8 this happens in less cases.  In particular, exceptions
  raised when getting the attribute from the type dictionary are no longer
  ignored.  (Contributed by Serhiy Storchaka in :issue:`35459`.)

* Removed ``__str__`` implementations from builtin types :class:`bool`,
  :class:`int`, :class:`float`, :class:`complex` and few classes from
  the standard library.  They now inherit ``__str__()`` from :class:`object`.
  As result, defining the ``__repr__()`` method in the subclass of these
  classes will affect they string representation.
  (Contributed by Serhiy Storchaka in :issue:`36793`.)

* On AIX, :attr:`sys.platform` doesn't contain the major version anymore.
  It is always ``'aix'``, instead of ``'aix3'`` .. ``'aix7'``.  Since
  older Python versions include the version number, it is recommended to
  always use the ``sys.platform.startswith('aix')``.
  (Contributed by M. Felt in :issue:`36588`.)

* :c:func:`PyEval_AcquireLock` and :c:func:`PyEval_AcquireThread` now
  terminate the current thread if called while the interpreter is
  finalizing, making them consistent with :c:func:`PyEval_RestoreThread`,
  :c:func:`Py_END_ALLOW_THREADS`, and :c:func:`PyGILState_Ensure`. If this
  behaviour is not desired, guard the call by checking :c:func:`_Py_IsFinalizing`
  or :c:func:`sys.is_finalizing`.

Changes in the Python API
-------------------------

* :class:`subprocess.Popen` can now use :func:`os.posix_spawn` in some cases
  for better performance. On Windows Subsystem for Linux and QEMU User
  Emulation, Popen constructor using :func:`os.posix_spawn` no longer raise an
  exception on errors like missing program, but the child process fails with a
  non-zero :attr:`~Popen.returncode`.

* The :meth:`imap.IMAP4.logout` method no longer ignores silently arbitrary
  exceptions.

* The function :func:`platform.popen` has been removed, it was deprecated since
  Python 3.3: use :func:`os.popen` instead.

* The :func:`statistics.mode` function no longer raises an exception
  when given multimodal data.  Instead, it returns the first mode
  encountered in the input data.  (Contributed by Raymond Hettinger
  in :issue:`35892`.)

* The :meth:`~tkinter.ttk.Treeview.selection` method of the
  :class:`tkinter.ttk.Treeview` class no longer takes arguments.  Using it with
  arguments for changing the selection was deprecated in Python 3.6.  Use
  specialized methods like :meth:`~tkinter.ttk.Treeview.selection_set` for
  changing the selection.  (Contributed by Serhiy Storchaka in :issue:`31508`.)

* The :meth:`writexml`, :meth:`toxml` and :meth:`toprettyxml` methods of the
  :mod:`xml.dom.minidom` module, and :mod:`xml.etree` now preserve the attribute
  order specified by the user.
  (Contributed by Diego Rojas and Raymond Hettinger in :issue:`34160`.)

* A :mod:`dbm.dumb` database opened with flags ``'r'`` is now read-only.
  :func:`dbm.dumb.open` with flags ``'r'`` and ``'w'`` no longer creates
  a database if it does not exist.
  (Contributed by Serhiy Storchaka in :issue:`32749`.)

* The ``doctype()`` method defined in a subclass of
  :class:`~xml.etree.ElementTree.XMLParser` will no longer be called and will
  cause emitting a :exc:`RuntimeWarning` instead of a :exc:`DeprecationWarning`.
  Define the :meth:`doctype() <xml.etree.ElementTree.TreeBuilder.doctype>`
  method on a target for handling an XML doctype declaration.
  (Contributed by Serhiy Storchaka in :issue:`29209`.)

* A :exc:`RuntimeError` is now raised when the custom metaclass doesn't
  provide the ``__classcell__`` entry in the namespace passed to
  ``type.__new__``.  A :exc:`DeprecationWarning` was emitted in Python
  3.6--3.7.  (Contributed by Serhiy Storchaka in :issue:`23722`.)

* The :class:`cProfile.Profile` class can now be used as a context
  manager. (Contributed by Scott Sanderson in :issue:`29235`.)

* :func:`shutil.copyfile`, :func:`shutil.copy`, :func:`shutil.copy2`,
  :func:`shutil.copytree` and :func:`shutil.move` use platform-specific
  "fast-copy" syscalls (see
  :ref:`shutil-platform-dependent-efficient-copy-operations` section).

* :func:`shutil.copyfile` default buffer size on Windows was changed from
  16 KiB to 1 MiB.

* ``PyGC_Head`` struct is changed completely.  All code touched the
  struct member should be rewritten.  (See :issue:`33597`)

* The ``PyInterpreterState`` struct has been moved into the "internal"
  header files (specifically Include/internal/pycore_pystate.h).  An
  opaque ``PyInterpreterState`` is still available as part of the public
  API (and stable ABI).  The docs indicate that none of the struct's
  fields are public, so we hope no one has been using them.  However,
  if you do rely on one or more of those private fields and have no
  alternative then please open a BPO issue.  We'll work on helping
  you adjust (possibly including adding accessor functions to the
  public API).  (See :issue:`35886`.)

* Asyncio tasks can now be named, either by passing the ``name`` keyword
  argument to :func:`asyncio.create_task` or
  the :meth:`~asyncio.loop.create_task` event loop method, or by
  calling the :meth:`~asyncio.Task.set_name` method on the task object. The
  task name is visible in the ``repr()`` output of :class:`asyncio.Task` and
  can also be retrieved using the :meth:`~asyncio.Task.get_name` method.

* The :meth:`mmap.flush() <mmap.mmap.flush>` method now returns ``None`` on
  success and raises an exception on error under all platforms.  Previously,
  its behavior was platform-depended: a nonzero value was returned on success;
  zero was returned on error under Windows.  A zero value was returned on
  success; an exception was raised on error under Unix.
  (Contributed by Berker Peksag in :issue:`2122`.)

* The function :func:`math.factorial` no longer accepts arguments that are not
  int-like. (Contributed by Pablo Galindo in :issue:`33083`.)

* :mod:`xml.dom.minidom` and :mod:`xml.sax` modules no longer process
  external entities by default.
  (Contributed by Christian Heimes in :issue:`17239`.)

* Deleting a key from a read-only :mod:`dbm` database (:mod:`dbm.dumb`,
  :mod:`dbm.gnu` or :mod:`dbm.ndbm`) raises :attr:`error` (:exc:`dbm.dumb.error`,
  :exc:`dbm.gnu.error` or :exc:`dbm.ndbm.error`) instead of :exc:`KeyError`.
  (Contributed by Xiang Zhang in :issue:`33106`.)

* :func:`~os.path.expanduser` on Windows now prefers the :envvar:`USERPROFILE`
  environment variable and does not use :envvar:`HOME`, which is not normally
  set for regular user accounts.

.. _bpo-36085-whatsnew:

* DLL dependencies for extension modules and DLLs loaded with :mod:`ctypes` on
  Windows are now resolved more securely. Only the system paths, the directory
  containing the DLL or PYD file, and directories added with
  :func:`~os.add_dll_directory` are searched for load-time dependencies.
  Specifically, :envvar:`PATH` and the current working directory are no longer
  used, and modifications to these will no longer have any effect on normal DLL
  resolution. If your application relies on these mechanisms, you should check
  for :func:`~os.add_dll_directory` and if it exists, use it to add your DLLs
  directory while loading your library. Note that Windows 7 users will need to
  ensure that Windows Update KB2533625 has been installed (this is also verified
  by the installer).
  (See :issue:`36085`.)

* The header files and functions related to pgen have been removed after its
  replacement by a pure Python implementation. (Contributed by Pablo Galindo
  in :issue:`36623`.)

* :class:`types.CodeType` has a new parameter in the second position of the
  constructor (*posonlyargcount*) to support positional-only arguments defined
  in :pep:`570`. A new ``replace()`` method of :class:`types.CodeType` can be
  used to make the code future-proof.


Changes in the C API
--------------------

* The :c:func:`PyEval_ReInitThreads` function has been removed from the C API.
  It should not be called explicitly: use :c:func:`PyOS_AfterFork_Child`
  instead.
  (Contributed by Victor Stinner in :issue:`36728`.)

* On Unix, C extensions are no longer linked to libpython except on Android
  and Cygwin. When Python is embedded, ``libpython`` must not be loaded with
  ``RTLD_LOCAL``, but ``RTLD_GLOBAL`` instead. Previously, using
  ``RTLD_LOCAL``, it was already not possible to load C extensions which
  were not linked to ``libpython``, like C extensions of the standard
  library built by the ``*shared*`` section of ``Modules/Setup``.

* Use of ``#`` variants of formats in parsing or building value (e.g.
  :c:func:`PyArg_ParseTuple`, :c:func:`Py_BuildValue`, :c:func:`PyObject_CallFunction`,
  etc.) without ``PY_SSIZE_T_CLEAN`` defined raises ``DeprecationWarning`` now.
  It will be removed in 3.10 or 4.0.  Read :ref:`arg-parsing` for detail.
  (Contributed by Inada Naoki in :issue:`36381`.)

* Instances of heap-allocated types (such as those created with
  :c:func:`PyType_FromSpec`) hold a reference to their type object.
  Increasing the reference count of these type objects has been moved from
  :c:func:`PyType_GenericAlloc` to the more low-level functions,
  :c:func:`PyObject_Init` and :c:func:`PyObject_INIT`.
  This makes types created through :c:func:`PyType_FromSpec` behave like
  other classes in managed code.

  Statically allocated types are not affected.

  For the vast majority of cases, there should be no side effect.
  However, types that manually increase the reference count after allocating
  an instance (perhaps to work around the bug) may now become immortal.
  To avoid this, these classes need to call Py_DECREF on the type object
  during instance deallocation.

  To correctly port these types into 3.8, please apply the following
  changes:

  * Remove :c:macro:`Py_INCREF` on the type object after allocating an
    instance - if any.
    This may happen after calling :c:func:`PyObject_New`,
    :c:func:`PyObject_NewVar`, :c:func:`PyObject_GC_New`,
    :c:func:`PyObject_GC_NewVar`, or any other custom allocator that uses
    :c:func:`PyObject_Init` or :c:func:`PyObject_INIT`.

    Example::

        static foo_struct *
        foo_new(PyObject *type) {
            foo_struct *foo = PyObject_GC_New(foo_struct, (PyTypeObject *) type);
            if (foo == NULL)
                return NULL;
        #if PY_VERSION_HEX < 0x03080000
            // Workaround for Python issue 35810; no longer necessary in Python 3.8
            PY_INCREF(type)
        #endif
            return foo;
        }

  * Ensure that all custom ``tp_dealloc`` functions of heap-allocated types
    decrease the type's reference count.

    Example::

        static void
        foo_dealloc(foo_struct *instance) {
            PyObject *type = Py_TYPE(instance);
            PyObject_GC_Del(instance);
        #if PY_VERSION_HEX >= 0x03080000
            // This was not needed before Python 3.8 (Python issue 35810)
            Py_DECREF(type);
        #endif
        }

  (Contributed by Eddie Elizondo in :issue:`35810`.)

* The :c:macro:`Py_DEPRECATED()` macro has been implemented for MSVC.
  The macro now must be placed before the symbol name.

  Example::

      Py_DEPRECATED(3.8) PyAPI_FUNC(int) Py_OldFunction(void);

  (Contributed by Zackery Spytz in :issue:`33407`.)


CPython bytecode changes
------------------------

* The interpreter loop  has been simplified by moving the logic of unrolling
  the stack of blocks into the compiler.  The compiler emits now explicit
  instructions for adjusting the stack of values and calling the
  cleaning-up code for :keyword:`break`, :keyword:`continue` and
  :keyword:`return`.

  Removed opcodes :opcode:`BREAK_LOOP`, :opcode:`CONTINUE_LOOP`,
  :opcode:`SETUP_LOOP` and :opcode:`SETUP_EXCEPT`.  Added new opcodes
  :opcode:`ROT_FOUR`, :opcode:`BEGIN_FINALLY`, :opcode:`CALL_FINALLY` and
  :opcode:`POP_FINALLY`.  Changed the behavior of :opcode:`END_FINALLY`
  and :opcode:`WITH_CLEANUP_START`.

  (Contributed by Mark Shannon, Antoine Pitrou and Serhiy Storchaka in
  :issue:`17611`.)

* Added new opcode :opcode:`END_ASYNC_FOR` for handling exceptions raised
  when awaiting a next item in an :keyword:`async for` loop.
  (Contributed by Serhiy Storchaka in :issue:`33041`.)


Demos and Tools
---------------

* Added a benchmark script for timing various ways to access variables:
  ``Tools/scripts/var_access_benchmark.py``.
  (Contributed by Raymond Hettinger in :issue:`35884`.)