diff --git a/Doc/howto/doanddont.rst b/Doc/howto/doanddont.rst
deleted file mode 100644
index 6fc0d6e..0000000
--- a/Doc/howto/doanddont.rst
+++ /dev/null
@@ -1,290 +0,0 @@
-************************************
-  Idioms and Anti-Idioms in Python
-************************************
-
-:Author: Moshe Zadka
-
-This document is placed in the public domain.
-
-
-.. topic:: Abstract
-
-   This document can be considered a companion to the tutorial. It shows how to use
-   Python, and even more importantly, how *not* to use Python.
-
-
-Language Constructs You Should Not Use
-======================================
-
-While Python has relatively few gotchas compared to other languages, it still
-has some constructs which are only useful in corner cases, or are plain
-dangerous.
-
-
-from module import \*
----------------------
-
-
-Inside Function Definitions
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-``from module import *`` is *invalid* inside function definitions. While many
-versions of Python do not check for the invalidity, it does not make it more
-valid, no more than having a smart lawyer makes a man innocent. Do not use it
-like that ever. Even in versions where it was accepted, it made the function
-execution slower, because the compiler could not be certain which names are
-local and which are global. In Python 2.1 this construct causes warnings, and
-sometimes even errors.
-
-
-At Module Level
-^^^^^^^^^^^^^^^
-
-While it is valid to use ``from module import *`` at module level it is usually
-a bad idea. For one, this loses an important property Python otherwise has ---
-you can know where each toplevel name is defined by a simple "search" function
-in your favourite editor. You also open yourself to trouble in the future, if
-some module grows additional functions or classes.
-
-One of the most awful question asked on the newsgroup is why this code::
-
-   f = open("www")
-   f.read()
-
-does not work. Of course, it works just fine (assuming you have a file called
-"www".) But it does not work if somewhere in the module, the statement ``from
-os import *`` is present. The :mod:`os` module has a function called
-:func:`open` which returns an integer. While it is very useful, shadowing a
-builtin is one of its least useful properties.
-
-Remember, you can never know for sure what names a module exports, so either
-take what you need --- ``from module import name1, name2``, or keep them in the
-module and access on a per-need basis --- ``import module; print(module.name)``.
-
-
-When It Is Just Fine
-^^^^^^^^^^^^^^^^^^^^
-
-There are situations in which ``from module import *`` is just fine:
-
-* The interactive prompt. For example, ``from math import *`` makes Python an
-  amazing scientific calculator.
-
-* When extending a module in C with a module in Python.
-
-* When the module advertises itself as ``from import *`` safe.
-
-
-from module import name1, name2
--------------------------------
-
-This is a "don't" which is much weaker than the previous "don't"s but is still
-something you should not do if you don't have good reasons to do that. The
-reason it is usually bad idea is because you suddenly have an object which lives
-in two separate namespaces. When the binding in one namespace changes, the
-binding in the other will not, so there will be a discrepancy between them. This
-happens when, for example, one module is reloaded, or changes the definition of
-a function at runtime.
-
-Bad example::
-
-   # foo.py
-   a = 1
-
-   # bar.py
-   from foo import a
-   if something():
-       a = 2 # danger: foo.a != a
-
-Good example::
-
-   # foo.py
-   a = 1
-
-   # bar.py
-   import foo
-   if something():
-       foo.a = 2
-
-
-except:
--------
-
-Python has the ``except:`` clause, which catches all exceptions. Since *every*
-error in Python raises an exception, using ``except:`` can make many
-programming errors look like runtime problems, which hinders the debugging
-process.
-
-The following code shows a great example of why this is bad::
-
-   try:
-       foo = opne("file") # misspelled "open"
-   except:
-       sys.exit("could not open file!")
-
-The second line triggers a :exc:`NameError`, which is caught by the except
-clause. The program will exit, and the error message the program prints will
-make you think the problem is the readability of ``"file"`` when in fact
-the real error has nothing to do with ``"file"``.
-
-A better way to write the above is ::
-
-   try:
-       foo = opne("file")
-   except IOError:
-       sys.exit("could not open file")
-
-When this is run, Python will produce a traceback showing the :exc:`NameError`,
-and it will be immediately apparent what needs to be fixed.
-
-.. index:: bare except, except; bare
-
-Because ``except:`` catches *all* exceptions, including :exc:`SystemExit`,
-:exc:`KeyboardInterrupt`, and :exc:`GeneratorExit` (which is not an error and
-should not normally be caught by user code), using a bare ``except:`` is almost
-never a good idea.  In situations where you need to catch all "normal" errors,
-such as in a framework that runs callbacks, you can catch the base class for
-all normal exceptions, :exc:`Exception`.
-
-
-Exceptions
-==========
-
-Exceptions are a useful feature of Python. You should learn to raise them
-whenever something unexpected occurs, and catch them only where you can do
-something about them.
-
-The following is a very popular anti-idiom ::
-
-   def get_status(file):
-       if not os.path.exists(file):
-           print("file not found")
-           sys.exit(1)
-       return open(file).readline()
-
-Consider the case where the file gets deleted between the time the call to
-:func:`os.path.exists` is made and the time :func:`open` is called. In that
-case the last line will raise an :exc:`IOError`.  The same thing would happen
-if *file* exists but has no read permission.  Since testing this on a normal
-machine on existent and non-existent files makes it seem bugless, the test
-results will seem fine, and the code will get shipped.  Later an unhandled
-:exc:`IOError` (or perhaps some other :exc:`EnvironmentError`) escapes to the
-user, who gets to watch the ugly traceback.
-
-Here is a somewhat better way to do it. ::
-
-   def get_status(file):
-       try:
-           return open(file).readline()
-       except EnvironmentError as err:
-           print("Unable to open file: {}".format(err))
-           sys.exit(1)
-
-In this version, *either* the file gets opened and the line is read (so it
-works even on flaky NFS or SMB connections), or an error message is printed
-that provides all the available information on why the open failed, and the
-application is aborted.
-
-However, even this version of :func:`get_status` makes too many assumptions ---
-that it will only be used in a short running script, and not, say, in a long
-running server. Sure, the caller could do something like ::
-
-   try:
-       status = get_status(log)
-   except SystemExit:
-       status = None
-
-But there is a better way.  You should try to use as few ``except`` clauses in
-your code as you can --- the ones you do use will usually be inside calls which
-should always succeed, or a catch-all in a main function.
-
-So, an even better version of :func:`get_status()` is probably ::
-
-   def get_status(file):
-       return open(file).readline()
-
-The caller can deal with the exception if it wants (for example, if it tries
-several files in a loop), or just let the exception filter upwards to *its*
-caller.
-
-But the last version still has a serious problem --- due to implementation
-details in CPython, the file would not be closed when an exception is raised
-until the exception handler finishes; and, worse, in other implementations
-(e.g., Jython) it might not be closed at all regardless of whether or not
-an exception is raised.
-
-The best version of this function uses the ``open()`` call as a context
-manager, which will ensure that the file gets closed as soon as the
-function returns::
-
-   def get_status(file):
-       with open(file) as fp:
-           return fp.readline()
-
-
-Using the Batteries
-===================
-
-Every so often, people seem to be writing stuff in the Python library again,
-usually poorly. While the occasional module has a poor interface, it is usually
-much better to use the rich standard library and data types that come with
-Python than inventing your own.
-
-A useful module very few people know about is :mod:`os.path`. It  always has the
-correct path arithmetic for your operating system, and will usually be much
-better than whatever you come up with yourself.
-
-Compare::
-
-   # ugh!
-   return dir+"/"+file
-   # better
-   return os.path.join(dir, file)
-
-More useful functions in :mod:`os.path`: :func:`basename`,  :func:`dirname` and
-:func:`splitext`.
-
-There are also many useful built-in functions people seem not to be aware of
-for some reason: :func:`min` and :func:`max` can find the minimum/maximum of
-any sequence with comparable semantics, for example, yet many people write
-their own :func:`max`/:func:`min`. Another highly useful function is
-:func:`functools.reduce` which can be used to repeatly apply a binary
-operation to a sequence, reducing it to a single value.  For example, compute
-a factorial with a series of multiply operations::
-
-   >>> n = 4
-   >>> import operator, functools
-   >>> functools.reduce(operator.mul, range(1, n+1))
-   24
-
-When it comes to parsing numbers, note that :func:`float`, :func:`int` and
-:func:`long` all accept string arguments and will reject ill-formed strings
-by raising an :exc:`ValueError`.
-
-
-Using Backslash to Continue Statements
-======================================
-
-Since Python treats a newline as a statement terminator, and since statements
-are often more than is comfortable to put in one line, many people do::
-
-   if foo.bar()['first'][0] == baz.quux(1, 2)[5:9] and \
-      calculate_number(10, 20) != forbulate(500, 360):
-         pass
-
-You should realize that this is dangerous: a stray space after the ``\`` would
-make this line wrong, and stray spaces are notoriously hard to see in editors.
-In this case, at least it would be a syntax error, but if the code was::
-
-   value = foo.bar()['first'][0]*baz.quux(1, 2)[5:9] \
-           + calculate_number(10, 20)*forbulate(500, 360)
-
-then it would just be subtly wrong.
-
-It is usually much better to use the implicit continuation inside parenthesis:
-
-This version is bulletproof::
-
-   value = (foo.bar()['first'][0]*baz.quux(1, 2)[5:9]
-           + calculate_number(10, 20)*forbulate(500, 360))
-
diff --git a/Doc/howto/index.rst b/Doc/howto/index.rst
index 94ecc9a..11fe108 100644
--- a/Doc/howto/index.rst
+++ b/Doc/howto/index.rst
@@ -18,7 +18,6 @@
    cporting.rst
    curses.rst
    descriptor.rst
-   doanddont.rst
    functional.rst
    logging.rst
    logging-cookbook.rst