| """Test suite for statistics module, including helper NumericTestCase and |
| approx_equal function. |
| |
| """ |
| |
| import collections |
| import decimal |
| import doctest |
| import math |
| import random |
| import sys |
| import unittest |
| |
| from decimal import Decimal |
| from fractions import Fraction |
| |
| |
| # Module to be tested. |
| import statistics |
| |
| |
| # === Helper functions and class === |
| |
| def _nan_equal(a, b): |
| """Return True if a and b are both the same kind of NAN. |
| |
| >>> _nan_equal(Decimal('NAN'), Decimal('NAN')) |
| True |
| >>> _nan_equal(Decimal('sNAN'), Decimal('sNAN')) |
| True |
| >>> _nan_equal(Decimal('NAN'), Decimal('sNAN')) |
| False |
| >>> _nan_equal(Decimal(42), Decimal('NAN')) |
| False |
| |
| >>> _nan_equal(float('NAN'), float('NAN')) |
| True |
| >>> _nan_equal(float('NAN'), 0.5) |
| False |
| |
| >>> _nan_equal(float('NAN'), Decimal('NAN')) |
| False |
| |
| NAN payloads are not compared. |
| """ |
| if type(a) is not type(b): |
| return False |
| if isinstance(a, float): |
| return math.isnan(a) and math.isnan(b) |
| aexp = a.as_tuple()[2] |
| bexp = b.as_tuple()[2] |
| return (aexp == bexp) and (aexp in ('n', 'N')) # Both NAN or both sNAN. |
| |
| |
| def _calc_errors(actual, expected): |
| """Return the absolute and relative errors between two numbers. |
| |
| >>> _calc_errors(100, 75) |
| (25, 0.25) |
| >>> _calc_errors(100, 100) |
| (0, 0.0) |
| |
| Returns the (absolute error, relative error) between the two arguments. |
| """ |
| base = max(abs(actual), abs(expected)) |
| abs_err = abs(actual - expected) |
| rel_err = abs_err/base if base else float('inf') |
| return (abs_err, rel_err) |
| |
| |
| def approx_equal(x, y, tol=1e-12, rel=1e-7): |
| """approx_equal(x, y [, tol [, rel]]) => True|False |
| |
| Return True if numbers x and y are approximately equal, to within some |
| margin of error, otherwise return False. Numbers which compare equal |
| will also compare approximately equal. |
| |
| x is approximately equal to y if the difference between them is less than |
| an absolute error tol or a relative error rel, whichever is bigger. |
| |
| If given, both tol and rel must be finite, non-negative numbers. If not |
| given, default values are tol=1e-12 and rel=1e-7. |
| |
| >>> approx_equal(1.2589, 1.2587, tol=0.0003, rel=0) |
| True |
| >>> approx_equal(1.2589, 1.2587, tol=0.0001, rel=0) |
| False |
| |
| Absolute error is defined as abs(x-y); if that is less than or equal to |
| tol, x and y are considered approximately equal. |
| |
| Relative error is defined as abs((x-y)/x) or abs((x-y)/y), whichever is |
| smaller, provided x or y are not zero. If that figure is less than or |
| equal to rel, x and y are considered approximately equal. |
| |
| Complex numbers are not directly supported. If you wish to compare to |
| complex numbers, extract their real and imaginary parts and compare them |
| individually. |
| |
| NANs always compare unequal, even with themselves. Infinities compare |
| approximately equal if they have the same sign (both positive or both |
| negative). Infinities with different signs compare unequal; so do |
| comparisons of infinities with finite numbers. |
| """ |
| if tol < 0 or rel < 0: |
| raise ValueError('error tolerances must be non-negative') |
| # NANs are never equal to anything, approximately or otherwise. |
| if math.isnan(x) or math.isnan(y): |
| return False |
| # Numbers which compare equal also compare approximately equal. |
| if x == y: |
| # This includes the case of two infinities with the same sign. |
| return True |
| if math.isinf(x) or math.isinf(y): |
| # This includes the case of two infinities of opposite sign, or |
| # one infinity and one finite number. |
| return False |
| # Two finite numbers. |
| actual_error = abs(x - y) |
| allowed_error = max(tol, rel*max(abs(x), abs(y))) |
| return actual_error <= allowed_error |
| |
| |
| # This class exists only as somewhere to stick a docstring containing |
| # doctests. The following docstring and tests were originally in a separate |
| # module. Now that it has been merged in here, I need somewhere to hang the. |
| # docstring. Ultimately, this class will die, and the information below will |
| # either become redundant, or be moved into more appropriate places. |
| class _DoNothing: |
| """ |
| When doing numeric work, especially with floats, exact equality is often |
| not what you want. Due to round-off error, it is often a bad idea to try |
| to compare floats with equality. Instead the usual procedure is to test |
| them with some (hopefully small!) allowance for error. |
| |
| The ``approx_equal`` function allows you to specify either an absolute |
| error tolerance, or a relative error, or both. |
| |
| Absolute error tolerances are simple, but you need to know the magnitude |
| of the quantities being compared: |
| |
| >>> approx_equal(12.345, 12.346, tol=1e-3) |
| True |
| >>> approx_equal(12.345e6, 12.346e6, tol=1e-3) # tol is too small. |
| False |
| |
| Relative errors are more suitable when the values you are comparing can |
| vary in magnitude: |
| |
| >>> approx_equal(12.345, 12.346, rel=1e-4) |
| True |
| >>> approx_equal(12.345e6, 12.346e6, rel=1e-4) |
| True |
| |
| but a naive implementation of relative error testing can run into trouble |
| around zero. |
| |
| If you supply both an absolute tolerance and a relative error, the |
| comparison succeeds if either individual test succeeds: |
| |
| >>> approx_equal(12.345e6, 12.346e6, tol=1e-3, rel=1e-4) |
| True |
| |
| """ |
| pass |
| |
| |
| |
| # We prefer this for testing numeric values that may not be exactly equal, |
| # and avoid using TestCase.assertAlmostEqual, because it sucks :-) |
| |
| class NumericTestCase(unittest.TestCase): |
| """Unit test class for numeric work. |
| |
| This subclasses TestCase. In addition to the standard method |
| ``TestCase.assertAlmostEqual``, ``assertApproxEqual`` is provided. |
| """ |
| # By default, we expect exact equality, unless overridden. |
| tol = rel = 0 |
| |
| def assertApproxEqual( |
| self, first, second, tol=None, rel=None, msg=None |
| ): |
| """Test passes if ``first`` and ``second`` are approximately equal. |
| |
| This test passes if ``first`` and ``second`` are equal to |
| within ``tol``, an absolute error, or ``rel``, a relative error. |
| |
| If either ``tol`` or ``rel`` are None or not given, they default to |
| test attributes of the same name (by default, 0). |
| |
| The objects may be either numbers, or sequences of numbers. Sequences |
| are tested element-by-element. |
| |
| >>> class MyTest(NumericTestCase): |
| ... def test_number(self): |
| ... x = 1.0/6 |
| ... y = sum([x]*6) |
| ... self.assertApproxEqual(y, 1.0, tol=1e-15) |
| ... def test_sequence(self): |
| ... a = [1.001, 1.001e-10, 1.001e10] |
| ... b = [1.0, 1e-10, 1e10] |
| ... self.assertApproxEqual(a, b, rel=1e-3) |
| ... |
| >>> import unittest |
| >>> from io import StringIO # Suppress test runner output. |
| >>> suite = unittest.TestLoader().loadTestsFromTestCase(MyTest) |
| >>> unittest.TextTestRunner(stream=StringIO()).run(suite) |
| <unittest.runner.TextTestResult run=2 errors=0 failures=0> |
| |
| """ |
| if tol is None: |
| tol = self.tol |
| if rel is None: |
| rel = self.rel |
| if ( |
| isinstance(first, collections.Sequence) and |
| isinstance(second, collections.Sequence) |
| ): |
| check = self._check_approx_seq |
| else: |
| check = self._check_approx_num |
| check(first, second, tol, rel, msg) |
| |
| def _check_approx_seq(self, first, second, tol, rel, msg): |
| if len(first) != len(second): |
| standardMsg = ( |
| "sequences differ in length: %d items != %d items" |
| % (len(first), len(second)) |
| ) |
| msg = self._formatMessage(msg, standardMsg) |
| raise self.failureException(msg) |
| for i, (a,e) in enumerate(zip(first, second)): |
| self._check_approx_num(a, e, tol, rel, msg, i) |
| |
| def _check_approx_num(self, first, second, tol, rel, msg, idx=None): |
| if approx_equal(first, second, tol, rel): |
| # Test passes. Return early, we are done. |
| return None |
| # Otherwise we failed. |
| standardMsg = self._make_std_err_msg(first, second, tol, rel, idx) |
| msg = self._formatMessage(msg, standardMsg) |
| raise self.failureException(msg) |
| |
| @staticmethod |
| def _make_std_err_msg(first, second, tol, rel, idx): |
| # Create the standard error message for approx_equal failures. |
| assert first != second |
| template = ( |
| ' %r != %r\n' |
| ' values differ by more than tol=%r and rel=%r\n' |
| ' -> absolute error = %r\n' |
| ' -> relative error = %r' |
| ) |
| if idx is not None: |
| header = 'numeric sequences first differ at index %d.\n' % idx |
| template = header + template |
| # Calculate actual errors: |
| abs_err, rel_err = _calc_errors(first, second) |
| return template % (first, second, tol, rel, abs_err, rel_err) |
| |
| |
| # ======================== |
| # === Test the helpers === |
| # ======================== |
| |
| |
| # --- Tests for approx_equal --- |
| |
| class ApproxEqualSymmetryTest(unittest.TestCase): |
| # Test symmetry of approx_equal. |
| |
| def test_relative_symmetry(self): |
| # Check that approx_equal treats relative error symmetrically. |
| # (a-b)/a is usually not equal to (a-b)/b. Ensure that this |
| # doesn't matter. |
| # |
| # Note: the reason for this test is that an early version |
| # of approx_equal was not symmetric. A relative error test |
| # would pass, or fail, depending on which value was passed |
| # as the first argument. |
| # |
| args1 = [2456, 37.8, -12.45, Decimal('2.54'), Fraction(17, 54)] |
| args2 = [2459, 37.2, -12.41, Decimal('2.59'), Fraction(15, 54)] |
| assert len(args1) == len(args2) |
| for a, b in zip(args1, args2): |
| self.do_relative_symmetry(a, b) |
| |
| def do_relative_symmetry(self, a, b): |
| a, b = min(a, b), max(a, b) |
| assert a < b |
| delta = b - a # The absolute difference between the values. |
| rel_err1, rel_err2 = abs(delta/a), abs(delta/b) |
| # Choose an error margin halfway between the two. |
| rel = (rel_err1 + rel_err2)/2 |
| # Now see that values a and b compare approx equal regardless of |
| # which is given first. |
| self.assertTrue(approx_equal(a, b, tol=0, rel=rel)) |
| self.assertTrue(approx_equal(b, a, tol=0, rel=rel)) |
| |
| def test_symmetry(self): |
| # Test that approx_equal(a, b) == approx_equal(b, a) |
| args = [-23, -2, 5, 107, 93568] |
| delta = 2 |
| for a in args: |
| for type_ in (int, float, Decimal, Fraction): |
| x = type_(a)*100 |
| y = x + delta |
| r = abs(delta/max(x, y)) |
| # There are five cases to check: |
| # 1) actual error <= tol, <= rel |
| self.do_symmetry_test(x, y, tol=delta, rel=r) |
| self.do_symmetry_test(x, y, tol=delta+1, rel=2*r) |
| # 2) actual error > tol, > rel |
| self.do_symmetry_test(x, y, tol=delta-1, rel=r/2) |
| # 3) actual error <= tol, > rel |
| self.do_symmetry_test(x, y, tol=delta, rel=r/2) |
| # 4) actual error > tol, <= rel |
| self.do_symmetry_test(x, y, tol=delta-1, rel=r) |
| self.do_symmetry_test(x, y, tol=delta-1, rel=2*r) |
| # 5) exact equality test |
| self.do_symmetry_test(x, x, tol=0, rel=0) |
| self.do_symmetry_test(x, y, tol=0, rel=0) |
| |
| def do_symmetry_test(self, a, b, tol, rel): |
| template = "approx_equal comparisons don't match for %r" |
| flag1 = approx_equal(a, b, tol, rel) |
| flag2 = approx_equal(b, a, tol, rel) |
| self.assertEqual(flag1, flag2, template.format((a, b, tol, rel))) |
| |
| |
| class ApproxEqualExactTest(unittest.TestCase): |
| # Test the approx_equal function with exactly equal values. |
| # Equal values should compare as approximately equal. |
| # Test cases for exactly equal values, which should compare approx |
| # equal regardless of the error tolerances given. |
| |
| def do_exactly_equal_test(self, x, tol, rel): |
| result = approx_equal(x, x, tol=tol, rel=rel) |
| self.assertTrue(result, 'equality failure for x=%r' % x) |
| result = approx_equal(-x, -x, tol=tol, rel=rel) |
| self.assertTrue(result, 'equality failure for x=%r' % -x) |
| |
| def test_exactly_equal_ints(self): |
| # Test that equal int values are exactly equal. |
| for n in [42, 19740, 14974, 230, 1795, 700245, 36587]: |
| self.do_exactly_equal_test(n, 0, 0) |
| |
| def test_exactly_equal_floats(self): |
| # Test that equal float values are exactly equal. |
| for x in [0.42, 1.9740, 1497.4, 23.0, 179.5, 70.0245, 36.587]: |
| self.do_exactly_equal_test(x, 0, 0) |
| |
| def test_exactly_equal_fractions(self): |
| # Test that equal Fraction values are exactly equal. |
| F = Fraction |
| for f in [F(1, 2), F(0), F(5, 3), F(9, 7), F(35, 36), F(3, 7)]: |
| self.do_exactly_equal_test(f, 0, 0) |
| |
| def test_exactly_equal_decimals(self): |
| # Test that equal Decimal values are exactly equal. |
| D = Decimal |
| for d in map(D, "8.2 31.274 912.04 16.745 1.2047".split()): |
| self.do_exactly_equal_test(d, 0, 0) |
| |
| def test_exactly_equal_absolute(self): |
| # Test that equal values are exactly equal with an absolute error. |
| for n in [16, 1013, 1372, 1198, 971, 4]: |
| # Test as ints. |
| self.do_exactly_equal_test(n, 0.01, 0) |
| # Test as floats. |
| self.do_exactly_equal_test(n/10, 0.01, 0) |
| # Test as Fractions. |
| f = Fraction(n, 1234) |
| self.do_exactly_equal_test(f, 0.01, 0) |
| |
| def test_exactly_equal_absolute_decimals(self): |
| # Test equal Decimal values are exactly equal with an absolute error. |
| self.do_exactly_equal_test(Decimal("3.571"), Decimal("0.01"), 0) |
| self.do_exactly_equal_test(-Decimal("81.3971"), Decimal("0.01"), 0) |
| |
| def test_exactly_equal_relative(self): |
| # Test that equal values are exactly equal with a relative error. |
| for x in [8347, 101.3, -7910.28, Fraction(5, 21)]: |
| self.do_exactly_equal_test(x, 0, 0.01) |
| self.do_exactly_equal_test(Decimal("11.68"), 0, Decimal("0.01")) |
| |
| def test_exactly_equal_both(self): |
| # Test that equal values are equal when both tol and rel are given. |
| for x in [41017, 16.742, -813.02, Fraction(3, 8)]: |
| self.do_exactly_equal_test(x, 0.1, 0.01) |
| D = Decimal |
| self.do_exactly_equal_test(D("7.2"), D("0.1"), D("0.01")) |
| |
| |
| class ApproxEqualUnequalTest(unittest.TestCase): |
| # Unequal values should compare unequal with zero error tolerances. |
| # Test cases for unequal values, with exact equality test. |
| |
| def do_exactly_unequal_test(self, x): |
| for a in (x, -x): |
| result = approx_equal(a, a+1, tol=0, rel=0) |
| self.assertFalse(result, 'inequality failure for x=%r' % a) |
| |
| def test_exactly_unequal_ints(self): |
| # Test unequal int values are unequal with zero error tolerance. |
| for n in [951, 572305, 478, 917, 17240]: |
| self.do_exactly_unequal_test(n) |
| |
| def test_exactly_unequal_floats(self): |
| # Test unequal float values are unequal with zero error tolerance. |
| for x in [9.51, 5723.05, 47.8, 9.17, 17.24]: |
| self.do_exactly_unequal_test(x) |
| |
| def test_exactly_unequal_fractions(self): |
| # Test that unequal Fractions are unequal with zero error tolerance. |
| F = Fraction |
| for f in [F(1, 5), F(7, 9), F(12, 11), F(101, 99023)]: |
| self.do_exactly_unequal_test(f) |
| |
| def test_exactly_unequal_decimals(self): |
| # Test that unequal Decimals are unequal with zero error tolerance. |
| for d in map(Decimal, "3.1415 298.12 3.47 18.996 0.00245".split()): |
| self.do_exactly_unequal_test(d) |
| |
| |
| class ApproxEqualInexactTest(unittest.TestCase): |
| # Inexact test cases for approx_error. |
| # Test cases when comparing two values that are not exactly equal. |
| |
| # === Absolute error tests === |
| |
| def do_approx_equal_abs_test(self, x, delta): |
| template = "Test failure for x={!r}, y={!r}" |
| for y in (x + delta, x - delta): |
| msg = template.format(x, y) |
| self.assertTrue(approx_equal(x, y, tol=2*delta, rel=0), msg) |
| self.assertFalse(approx_equal(x, y, tol=delta/2, rel=0), msg) |
| |
| def test_approx_equal_absolute_ints(self): |
| # Test approximate equality of ints with an absolute error. |
| for n in [-10737, -1975, -7, -2, 0, 1, 9, 37, 423, 9874, 23789110]: |
| self.do_approx_equal_abs_test(n, 10) |
| self.do_approx_equal_abs_test(n, 2) |
| |
| def test_approx_equal_absolute_floats(self): |
| # Test approximate equality of floats with an absolute error. |
| for x in [-284.126, -97.1, -3.4, -2.15, 0.5, 1.0, 7.8, 4.23, 3817.4]: |
| self.do_approx_equal_abs_test(x, 1.5) |
| self.do_approx_equal_abs_test(x, 0.01) |
| self.do_approx_equal_abs_test(x, 0.0001) |
| |
| def test_approx_equal_absolute_fractions(self): |
| # Test approximate equality of Fractions with an absolute error. |
| delta = Fraction(1, 29) |
| numerators = [-84, -15, -2, -1, 0, 1, 5, 17, 23, 34, 71] |
| for f in (Fraction(n, 29) for n in numerators): |
| self.do_approx_equal_abs_test(f, delta) |
| self.do_approx_equal_abs_test(f, float(delta)) |
| |
| def test_approx_equal_absolute_decimals(self): |
| # Test approximate equality of Decimals with an absolute error. |
| delta = Decimal("0.01") |
| for d in map(Decimal, "1.0 3.5 36.08 61.79 7912.3648".split()): |
| self.do_approx_equal_abs_test(d, delta) |
| self.do_approx_equal_abs_test(-d, delta) |
| |
| def test_cross_zero(self): |
| # Test for the case of the two values having opposite signs. |
| self.assertTrue(approx_equal(1e-5, -1e-5, tol=1e-4, rel=0)) |
| |
| # === Relative error tests === |
| |
| def do_approx_equal_rel_test(self, x, delta): |
| template = "Test failure for x={!r}, y={!r}" |
| for y in (x*(1+delta), x*(1-delta)): |
| msg = template.format(x, y) |
| self.assertTrue(approx_equal(x, y, tol=0, rel=2*delta), msg) |
| self.assertFalse(approx_equal(x, y, tol=0, rel=delta/2), msg) |
| |
| def test_approx_equal_relative_ints(self): |
| # Test approximate equality of ints with a relative error. |
| self.assertTrue(approx_equal(64, 47, tol=0, rel=0.36)) |
| self.assertTrue(approx_equal(64, 47, tol=0, rel=0.37)) |
| # --- |
| self.assertTrue(approx_equal(449, 512, tol=0, rel=0.125)) |
| self.assertTrue(approx_equal(448, 512, tol=0, rel=0.125)) |
| self.assertFalse(approx_equal(447, 512, tol=0, rel=0.125)) |
| |
| def test_approx_equal_relative_floats(self): |
| # Test approximate equality of floats with a relative error. |
| for x in [-178.34, -0.1, 0.1, 1.0, 36.97, 2847.136, 9145.074]: |
| self.do_approx_equal_rel_test(x, 0.02) |
| self.do_approx_equal_rel_test(x, 0.0001) |
| |
| def test_approx_equal_relative_fractions(self): |
| # Test approximate equality of Fractions with a relative error. |
| F = Fraction |
| delta = Fraction(3, 8) |
| for f in [F(3, 84), F(17, 30), F(49, 50), F(92, 85)]: |
| for d in (delta, float(delta)): |
| self.do_approx_equal_rel_test(f, d) |
| self.do_approx_equal_rel_test(-f, d) |
| |
| def test_approx_equal_relative_decimals(self): |
| # Test approximate equality of Decimals with a relative error. |
| for d in map(Decimal, "0.02 1.0 5.7 13.67 94.138 91027.9321".split()): |
| self.do_approx_equal_rel_test(d, Decimal("0.001")) |
| self.do_approx_equal_rel_test(-d, Decimal("0.05")) |
| |
| # === Both absolute and relative error tests === |
| |
| # There are four cases to consider: |
| # 1) actual error <= both absolute and relative error |
| # 2) actual error <= absolute error but > relative error |
| # 3) actual error <= relative error but > absolute error |
| # 4) actual error > both absolute and relative error |
| |
| def do_check_both(self, a, b, tol, rel, tol_flag, rel_flag): |
| check = self.assertTrue if tol_flag else self.assertFalse |
| check(approx_equal(a, b, tol=tol, rel=0)) |
| check = self.assertTrue if rel_flag else self.assertFalse |
| check(approx_equal(a, b, tol=0, rel=rel)) |
| check = self.assertTrue if (tol_flag or rel_flag) else self.assertFalse |
| check(approx_equal(a, b, tol=tol, rel=rel)) |
| |
| def test_approx_equal_both1(self): |
| # Test actual error <= both absolute and relative error. |
| self.do_check_both(7.955, 7.952, 0.004, 3.8e-4, True, True) |
| self.do_check_both(-7.387, -7.386, 0.002, 0.0002, True, True) |
| |
| def test_approx_equal_both2(self): |
| # Test actual error <= absolute error but > relative error. |
| self.do_check_both(7.955, 7.952, 0.004, 3.7e-4, True, False) |
| |
| def test_approx_equal_both3(self): |
| # Test actual error <= relative error but > absolute error. |
| self.do_check_both(7.955, 7.952, 0.001, 3.8e-4, False, True) |
| |
| def test_approx_equal_both4(self): |
| # Test actual error > both absolute and relative error. |
| self.do_check_both(2.78, 2.75, 0.01, 0.001, False, False) |
| self.do_check_both(971.44, 971.47, 0.02, 3e-5, False, False) |
| |
| |
| class ApproxEqualSpecialsTest(unittest.TestCase): |
| # Test approx_equal with NANs and INFs and zeroes. |
| |
| def test_inf(self): |
| for type_ in (float, Decimal): |
| inf = type_('inf') |
| self.assertTrue(approx_equal(inf, inf)) |
| self.assertTrue(approx_equal(inf, inf, 0, 0)) |
| self.assertTrue(approx_equal(inf, inf, 1, 0.01)) |
| self.assertTrue(approx_equal(-inf, -inf)) |
| self.assertFalse(approx_equal(inf, -inf)) |
| self.assertFalse(approx_equal(inf, 1000)) |
| |
| def test_nan(self): |
| for type_ in (float, Decimal): |
| nan = type_('nan') |
| for other in (nan, type_('inf'), 1000): |
| self.assertFalse(approx_equal(nan, other)) |
| |
| def test_float_zeroes(self): |
| nzero = math.copysign(0.0, -1) |
| self.assertTrue(approx_equal(nzero, 0.0, tol=0.1, rel=0.1)) |
| |
| def test_decimal_zeroes(self): |
| nzero = Decimal("-0.0") |
| self.assertTrue(approx_equal(nzero, Decimal(0), tol=0.1, rel=0.1)) |
| |
| |
| class TestApproxEqualErrors(unittest.TestCase): |
| # Test error conditions of approx_equal. |
| |
| def test_bad_tol(self): |
| # Test negative tol raises. |
| self.assertRaises(ValueError, approx_equal, 100, 100, -1, 0.1) |
| |
| def test_bad_rel(self): |
| # Test negative rel raises. |
| self.assertRaises(ValueError, approx_equal, 100, 100, 1, -0.1) |
| |
| |
| # --- Tests for NumericTestCase --- |
| |
| # The formatting routine that generates the error messages is complex enough |
| # that it too needs testing. |
| |
| class TestNumericTestCase(unittest.TestCase): |
| # The exact wording of NumericTestCase error messages is *not* guaranteed, |
| # but we need to give them some sort of test to ensure that they are |
| # generated correctly. As a compromise, we look for specific substrings |
| # that are expected to be found even if the overall error message changes. |
| |
| def do_test(self, args): |
| actual_msg = NumericTestCase._make_std_err_msg(*args) |
| expected = self.generate_substrings(*args) |
| for substring in expected: |
| self.assertIn(substring, actual_msg) |
| |
| def test_numerictestcase_is_testcase(self): |
| # Ensure that NumericTestCase actually is a TestCase. |
| self.assertTrue(issubclass(NumericTestCase, unittest.TestCase)) |
| |
| def test_error_msg_numeric(self): |
| # Test the error message generated for numeric comparisons. |
| args = (2.5, 4.0, 0.5, 0.25, None) |
| self.do_test(args) |
| |
| def test_error_msg_sequence(self): |
| # Test the error message generated for sequence comparisons. |
| args = (3.75, 8.25, 1.25, 0.5, 7) |
| self.do_test(args) |
| |
| def generate_substrings(self, first, second, tol, rel, idx): |
| """Return substrings we expect to see in error messages.""" |
| abs_err, rel_err = _calc_errors(first, second) |
| substrings = [ |
| 'tol=%r' % tol, |
| 'rel=%r' % rel, |
| 'absolute error = %r' % abs_err, |
| 'relative error = %r' % rel_err, |
| ] |
| if idx is not None: |
| substrings.append('differ at index %d' % idx) |
| return substrings |
| |
| |
| # ======================================= |
| # === Tests for the statistics module === |
| # ======================================= |
| |
| |
| class GlobalsTest(unittest.TestCase): |
| module = statistics |
| expected_metadata = ["__doc__", "__all__"] |
| |
| def test_meta(self): |
| # Test for the existence of metadata. |
| for meta in self.expected_metadata: |
| self.assertTrue(hasattr(self.module, meta), |
| "%s not present" % meta) |
| |
| def test_check_all(self): |
| # Check everything in __all__ exists and is public. |
| module = self.module |
| for name in module.__all__: |
| # No private names in __all__: |
| self.assertFalse(name.startswith("_"), |
| 'private name "%s" in __all__' % name) |
| # And anything in __all__ must exist: |
| self.assertTrue(hasattr(module, name), |
| 'missing name "%s" in __all__' % name) |
| |
| |
| class DocTests(unittest.TestCase): |
| @unittest.skipIf(sys.flags.optimize >= 2, |
| "Docstrings are omitted with -OO and above") |
| def test_doc_tests(self): |
| failed, tried = doctest.testmod(statistics) |
| self.assertGreater(tried, 0) |
| self.assertEqual(failed, 0) |
| |
| class StatisticsErrorTest(unittest.TestCase): |
| def test_has_exception(self): |
| errmsg = ( |
| "Expected StatisticsError to be a ValueError, but got a" |
| " subclass of %r instead." |
| ) |
| self.assertTrue(hasattr(statistics, 'StatisticsError')) |
| self.assertTrue( |
| issubclass(statistics.StatisticsError, ValueError), |
| errmsg % statistics.StatisticsError.__base__ |
| ) |
| |
| |
| # === Tests for private utility functions === |
| |
| class ExactRatioTest(unittest.TestCase): |
| # Test _exact_ratio utility. |
| |
| def test_int(self): |
| for i in (-20, -3, 0, 5, 99, 10**20): |
| self.assertEqual(statistics._exact_ratio(i), (i, 1)) |
| |
| def test_fraction(self): |
| numerators = (-5, 1, 12, 38) |
| for n in numerators: |
| f = Fraction(n, 37) |
| self.assertEqual(statistics._exact_ratio(f), (n, 37)) |
| |
| def test_float(self): |
| self.assertEqual(statistics._exact_ratio(0.125), (1, 8)) |
| self.assertEqual(statistics._exact_ratio(1.125), (9, 8)) |
| data = [random.uniform(-100, 100) for _ in range(100)] |
| for x in data: |
| num, den = statistics._exact_ratio(x) |
| self.assertEqual(x, num/den) |
| |
| @unittest.skipIf(True, "temporarily disabled: see #25928") |
| def test_decimal(self): |
| D = Decimal |
| _exact_ratio = statistics._exact_ratio |
| self.assertEqual(_exact_ratio(D("0.125")), (125, 1000)) |
| self.assertEqual(_exact_ratio(D("12.345")), (12345, 1000)) |
| self.assertEqual(_exact_ratio(D("-1.98")), (-198, 100)) |
| |
| def test_inf(self): |
| INF = float("INF") |
| class MyFloat(float): |
| pass |
| class MyDecimal(Decimal): |
| pass |
| for inf in (INF, -INF): |
| for type_ in (float, MyFloat, Decimal, MyDecimal): |
| x = type_(inf) |
| ratio = statistics._exact_ratio(x) |
| self.assertEqual(ratio, (x, None)) |
| self.assertEqual(type(ratio[0]), type_) |
| self.assertTrue(math.isinf(ratio[0])) |
| |
| def test_float_nan(self): |
| NAN = float("NAN") |
| class MyFloat(float): |
| pass |
| for nan in (NAN, MyFloat(NAN)): |
| ratio = statistics._exact_ratio(nan) |
| self.assertTrue(math.isnan(ratio[0])) |
| self.assertIs(ratio[1], None) |
| self.assertEqual(type(ratio[0]), type(nan)) |
| |
| @unittest.skipIf(True, "temporarily disabled: see #25928") |
| def test_decimal_nan(self): |
| NAN = Decimal("NAN") |
| sNAN = Decimal("sNAN") |
| class MyDecimal(Decimal): |
| pass |
| for nan in (NAN, MyDecimal(NAN), sNAN, MyDecimal(sNAN)): |
| ratio = statistics._exact_ratio(nan) |
| self.assertTrue(_nan_equal(ratio[0], nan)) |
| self.assertIs(ratio[1], None) |
| self.assertEqual(type(ratio[0]), type(nan)) |
| |
| |
| class DecimalToRatioTest(unittest.TestCase): |
| # Test _decimal_to_ratio private function. |
| |
| def test_infinity(self): |
| # Test that INFs are handled correctly. |
| inf = Decimal('INF') |
| self.assertEqual(statistics._decimal_to_ratio(inf), (inf, None)) |
| self.assertEqual(statistics._decimal_to_ratio(-inf), (-inf, None)) |
| |
| def test_nan(self): |
| # Test that NANs are handled correctly. |
| for nan in (Decimal('NAN'), Decimal('sNAN')): |
| num, den = statistics._decimal_to_ratio(nan) |
| # Because NANs always compare non-equal, we cannot use assertEqual. |
| # Nor can we use an identity test, as we don't guarantee anything |
| # about the object identity. |
| self.assertTrue(_nan_equal(num, nan)) |
| self.assertIs(den, None) |
| |
| def test_sign(self): |
| # Test sign is calculated correctly. |
| numbers = [Decimal("9.8765e12"), Decimal("9.8765e-12")] |
| for d in numbers: |
| # First test positive decimals. |
| assert d > 0 |
| num, den = statistics._decimal_to_ratio(d) |
| self.assertGreaterEqual(num, 0) |
| self.assertGreater(den, 0) |
| # Then test negative decimals. |
| num, den = statistics._decimal_to_ratio(-d) |
| self.assertLessEqual(num, 0) |
| self.assertGreater(den, 0) |
| |
| def test_negative_exponent(self): |
| # Test result when the exponent is negative. |
| t = statistics._decimal_to_ratio(Decimal("0.1234")) |
| self.assertEqual(t, (1234, 10000)) |
| |
| def test_positive_exponent(self): |
| # Test results when the exponent is positive. |
| t = statistics._decimal_to_ratio(Decimal("1.234e7")) |
| self.assertEqual(t, (12340000, 1)) |
| |
| def test_regression_20536(self): |
| # Regression test for issue 20536. |
| # See http://bugs.python.org/issue20536 |
| t = statistics._decimal_to_ratio(Decimal("1e2")) |
| self.assertEqual(t, (100, 1)) |
| t = statistics._decimal_to_ratio(Decimal("1.47e5")) |
| self.assertEqual(t, (147000, 1)) |
| |
| |
| class IsFiniteTest(unittest.TestCase): |
| # Test _isfinite private function. |
| |
| def test_finite(self): |
| # Test that finite numbers are recognised as finite. |
| for x in (5, Fraction(1, 3), 2.5, Decimal("5.5")): |
| self.assertTrue(statistics._isfinite(x)) |
| |
| def test_infinity(self): |
| # Test that INFs are not recognised as finite. |
| for x in (float("inf"), Decimal("inf")): |
| self.assertFalse(statistics._isfinite(x)) |
| |
| def test_nan(self): |
| # Test that NANs are not recognised as finite. |
| for x in (float("nan"), Decimal("NAN"), Decimal("sNAN")): |
| self.assertFalse(statistics._isfinite(x)) |
| |
| |
| class CoerceTest(unittest.TestCase): |
| # Test that private function _coerce correctly deals with types. |
| |
| # The coercion rules are currently an implementation detail, although at |
| # some point that should change. The tests and comments here define the |
| # correct implementation. |
| |
| # Pre-conditions of _coerce: |
| # |
| # - The first time _sum calls _coerce, the |
| # - coerce(T, S) will never be called with bool as the first argument; |
| # this is a pre-condition, guarded with an assertion. |
| |
| # |
| # - coerce(T, T) will always return T; we assume T is a valid numeric |
| # type. Violate this assumption at your own risk. |
| # |
| # - Apart from as above, bool is treated as if it were actually int. |
| # |
| # - coerce(int, X) and coerce(X, int) return X. |
| # - |
| def test_bool(self): |
| # bool is somewhat special, due to the pre-condition that it is |
| # never given as the first argument to _coerce, and that it cannot |
| # be subclassed. So we test it specially. |
| for T in (int, float, Fraction, Decimal): |
| self.assertIs(statistics._coerce(T, bool), T) |
| class MyClass(T): pass |
| self.assertIs(statistics._coerce(MyClass, bool), MyClass) |
| |
| def assertCoerceTo(self, A, B): |
| """Assert that type A coerces to B.""" |
| self.assertIs(statistics._coerce(A, B), B) |
| self.assertIs(statistics._coerce(B, A), B) |
| |
| def check_coerce_to(self, A, B): |
| """Checks that type A coerces to B, including subclasses.""" |
| # Assert that type A is coerced to B. |
| self.assertCoerceTo(A, B) |
| # Subclasses of A are also coerced to B. |
| class SubclassOfA(A): pass |
| self.assertCoerceTo(SubclassOfA, B) |
| # A, and subclasses of A, are coerced to subclasses of B. |
| class SubclassOfB(B): pass |
| self.assertCoerceTo(A, SubclassOfB) |
| self.assertCoerceTo(SubclassOfA, SubclassOfB) |
| |
| def assertCoerceRaises(self, A, B): |
| """Assert that coercing A to B, or vice versa, raises TypeError.""" |
| self.assertRaises(TypeError, statistics._coerce, (A, B)) |
| self.assertRaises(TypeError, statistics._coerce, (B, A)) |
| |
| def check_type_coercions(self, T): |
| """Check that type T coerces correctly with subclasses of itself.""" |
| assert T is not bool |
| # Coercing a type with itself returns the same type. |
| self.assertIs(statistics._coerce(T, T), T) |
| # Coercing a type with a subclass of itself returns the subclass. |
| class U(T): pass |
| class V(T): pass |
| class W(U): pass |
| for typ in (U, V, W): |
| self.assertCoerceTo(T, typ) |
| self.assertCoerceTo(U, W) |
| # Coercing two subclasses that aren't parent/child is an error. |
| self.assertCoerceRaises(U, V) |
| self.assertCoerceRaises(V, W) |
| |
| def test_int(self): |
| # Check that int coerces correctly. |
| self.check_type_coercions(int) |
| for typ in (float, Fraction, Decimal): |
| self.check_coerce_to(int, typ) |
| |
| def test_fraction(self): |
| # Check that Fraction coerces correctly. |
| self.check_type_coercions(Fraction) |
| self.check_coerce_to(Fraction, float) |
| |
| def test_decimal(self): |
| # Check that Decimal coerces correctly. |
| self.check_type_coercions(Decimal) |
| |
| def test_float(self): |
| # Check that float coerces correctly. |
| self.check_type_coercions(float) |
| |
| def test_non_numeric_types(self): |
| for bad_type in (str, list, type(None), tuple, dict): |
| for good_type in (int, float, Fraction, Decimal): |
| self.assertCoerceRaises(good_type, bad_type) |
| |
| def test_incompatible_types(self): |
| # Test that incompatible types raise. |
| for T in (float, Fraction): |
| class MySubclass(T): pass |
| self.assertCoerceRaises(T, Decimal) |
| self.assertCoerceRaises(MySubclass, Decimal) |
| |
| |
| class ConvertTest(unittest.TestCase): |
| # Test private _convert function. |
| |
| def check_exact_equal(self, x, y): |
| """Check that x equals y, and has the same type as well.""" |
| self.assertEqual(x, y) |
| self.assertIs(type(x), type(y)) |
| |
| def test_int(self): |
| # Test conversions to int. |
| x = statistics._convert(Fraction(71), int) |
| self.check_exact_equal(x, 71) |
| class MyInt(int): pass |
| x = statistics._convert(Fraction(17), MyInt) |
| self.check_exact_equal(x, MyInt(17)) |
| |
| def test_fraction(self): |
| # Test conversions to Fraction. |
| x = statistics._convert(Fraction(95, 99), Fraction) |
| self.check_exact_equal(x, Fraction(95, 99)) |
| class MyFraction(Fraction): |
| def __truediv__(self, other): |
| return self.__class__(super().__truediv__(other)) |
| x = statistics._convert(Fraction(71, 13), MyFraction) |
| self.check_exact_equal(x, MyFraction(71, 13)) |
| |
| def test_float(self): |
| # Test conversions to float. |
| x = statistics._convert(Fraction(-1, 2), float) |
| self.check_exact_equal(x, -0.5) |
| class MyFloat(float): |
| def __truediv__(self, other): |
| return self.__class__(super().__truediv__(other)) |
| x = statistics._convert(Fraction(9, 8), MyFloat) |
| self.check_exact_equal(x, MyFloat(1.125)) |
| |
| def test_decimal(self): |
| # Test conversions to Decimal. |
| x = statistics._convert(Fraction(1, 40), Decimal) |
| self.check_exact_equal(x, Decimal("0.025")) |
| class MyDecimal(Decimal): |
| def __truediv__(self, other): |
| return self.__class__(super().__truediv__(other)) |
| x = statistics._convert(Fraction(-15, 16), MyDecimal) |
| self.check_exact_equal(x, MyDecimal("-0.9375")) |
| |
| def test_inf(self): |
| for INF in (float('inf'), Decimal('inf')): |
| for inf in (INF, -INF): |
| x = statistics._convert(inf, type(inf)) |
| self.check_exact_equal(x, inf) |
| |
| def test_nan(self): |
| for nan in (float('nan'), Decimal('NAN'), Decimal('sNAN')): |
| x = statistics._convert(nan, type(nan)) |
| self.assertTrue(_nan_equal(x, nan)) |
| |
| |
| # === Tests for public functions === |
| |
| class UnivariateCommonMixin: |
| # Common tests for most univariate functions that take a data argument. |
| |
| def test_no_args(self): |
| # Fail if given no arguments. |
| self.assertRaises(TypeError, self.func) |
| |
| def test_empty_data(self): |
| # Fail when the data argument (first argument) is empty. |
| for empty in ([], (), iter([])): |
| self.assertRaises(statistics.StatisticsError, self.func, empty) |
| |
| def prepare_data(self): |
| """Return int data for various tests.""" |
| data = list(range(10)) |
| while data == sorted(data): |
| random.shuffle(data) |
| return data |
| |
| def test_no_inplace_modifications(self): |
| # Test that the function does not modify its input data. |
| data = self.prepare_data() |
| assert len(data) != 1 # Necessary to avoid infinite loop. |
| assert data != sorted(data) |
| saved = data[:] |
| assert data is not saved |
| _ = self.func(data) |
| self.assertListEqual(data, saved, "data has been modified") |
| |
| def test_order_doesnt_matter(self): |
| # Test that the order of data points doesn't change the result. |
| |
| # CAUTION: due to floating point rounding errors, the result actually |
| # may depend on the order. Consider this test representing an ideal. |
| # To avoid this test failing, only test with exact values such as ints |
| # or Fractions. |
| data = [1, 2, 3, 3, 3, 4, 5, 6]*100 |
| expected = self.func(data) |
| random.shuffle(data) |
| actual = self.func(data) |
| self.assertEqual(expected, actual) |
| |
| def test_type_of_data_collection(self): |
| # Test that the type of iterable data doesn't effect the result. |
| class MyList(list): |
| pass |
| class MyTuple(tuple): |
| pass |
| def generator(data): |
| return (obj for obj in data) |
| data = self.prepare_data() |
| expected = self.func(data) |
| for kind in (list, tuple, iter, MyList, MyTuple, generator): |
| result = self.func(kind(data)) |
| self.assertEqual(result, expected) |
| |
| def test_range_data(self): |
| # Test that functions work with range objects. |
| data = range(20, 50, 3) |
| expected = self.func(list(data)) |
| self.assertEqual(self.func(data), expected) |
| |
| def test_bad_arg_types(self): |
| # Test that function raises when given data of the wrong type. |
| |
| # Don't roll the following into a loop like this: |
| # for bad in list_of_bad: |
| # self.check_for_type_error(bad) |
| # |
| # Since assertRaises doesn't show the arguments that caused the test |
| # failure, it is very difficult to debug these test failures when the |
| # following are in a loop. |
| self.check_for_type_error(None) |
| self.check_for_type_error(23) |
| self.check_for_type_error(42.0) |
| self.check_for_type_error(object()) |
| |
| def check_for_type_error(self, *args): |
| self.assertRaises(TypeError, self.func, *args) |
| |
| def test_type_of_data_element(self): |
| # Check the type of data elements doesn't affect the numeric result. |
| # This is a weaker test than UnivariateTypeMixin.testTypesConserved, |
| # because it checks the numeric result by equality, but not by type. |
| class MyFloat(float): |
| def __truediv__(self, other): |
| return type(self)(super().__truediv__(other)) |
| def __add__(self, other): |
| return type(self)(super().__add__(other)) |
| __radd__ = __add__ |
| |
| raw = self.prepare_data() |
| expected = self.func(raw) |
| for kind in (float, MyFloat, Decimal, Fraction): |
| data = [kind(x) for x in raw] |
| result = type(expected)(self.func(data)) |
| self.assertEqual(result, expected) |
| |
| |
| class UnivariateTypeMixin: |
| """Mixin class for type-conserving functions. |
| |
| This mixin class holds test(s) for functions which conserve the type of |
| individual data points. E.g. the mean of a list of Fractions should itself |
| be a Fraction. |
| |
| Not all tests to do with types need go in this class. Only those that |
| rely on the function returning the same type as its input data. |
| """ |
| def test_types_conserved(self): |
| # Test that functions keeps the same type as their data points. |
| # (Excludes mixed data types.) This only tests the type of the return |
| # result, not the value. |
| class MyFloat(float): |
| def __truediv__(self, other): |
| return type(self)(super().__truediv__(other)) |
| def __sub__(self, other): |
| return type(self)(super().__sub__(other)) |
| def __rsub__(self, other): |
| return type(self)(super().__rsub__(other)) |
| def __pow__(self, other): |
| return type(self)(super().__pow__(other)) |
| def __add__(self, other): |
| return type(self)(super().__add__(other)) |
| __radd__ = __add__ |
| |
| data = self.prepare_data() |
| for kind in (float, Decimal, Fraction, MyFloat): |
| d = [kind(x) for x in data] |
| result = self.func(d) |
| self.assertIs(type(result), kind) |
| |
| |
| class TestSumCommon(UnivariateCommonMixin, UnivariateTypeMixin): |
| # Common test cases for statistics._sum() function. |
| |
| # This test suite looks only at the numeric value returned by _sum, |
| # after conversion to the appropriate type. |
| def setUp(self): |
| def simplified_sum(*args): |
| T, value, n = statistics._sum(*args) |
| return statistics._coerce(value, T) |
| self.func = simplified_sum |
| |
| |
| class TestSum(NumericTestCase): |
| # Test cases for statistics._sum() function. |
| |
| # These tests look at the entire three value tuple returned by _sum. |
| |
| def setUp(self): |
| self.func = statistics._sum |
| |
| def test_empty_data(self): |
| # Override test for empty data. |
| for data in ([], (), iter([])): |
| self.assertEqual(self.func(data), (int, Fraction(0), 0)) |
| self.assertEqual(self.func(data, 23), (int, Fraction(23), 0)) |
| self.assertEqual(self.func(data, 2.3), (float, Fraction(2.3), 0)) |
| |
| def test_ints(self): |
| self.assertEqual(self.func([1, 5, 3, -4, -8, 20, 42, 1]), |
| (int, Fraction(60), 8)) |
| self.assertEqual(self.func([4, 2, 3, -8, 7], 1000), |
| (int, Fraction(1008), 5)) |
| |
| def test_floats(self): |
| self.assertEqual(self.func([0.25]*20), |
| (float, Fraction(5.0), 20)) |
| self.assertEqual(self.func([0.125, 0.25, 0.5, 0.75], 1.5), |
| (float, Fraction(3.125), 4)) |
| |
| def test_fractions(self): |
| self.assertEqual(self.func([Fraction(1, 1000)]*500), |
| (Fraction, Fraction(1, 2), 500)) |
| |
| def test_decimals(self): |
| D = Decimal |
| data = [D("0.001"), D("5.246"), D("1.702"), D("-0.025"), |
| D("3.974"), D("2.328"), D("4.617"), D("2.843"), |
| ] |
| self.assertEqual(self.func(data), |
| (Decimal, Decimal("20.686"), 8)) |
| |
| def test_compare_with_math_fsum(self): |
| # Compare with the math.fsum function. |
| # Ideally we ought to get the exact same result, but sometimes |
| # we differ by a very slight amount :-( |
| data = [random.uniform(-100, 1000) for _ in range(1000)] |
| self.assertApproxEqual(float(self.func(data)[1]), math.fsum(data), rel=2e-16) |
| |
| def test_start_argument(self): |
| # Test that the optional start argument works correctly. |
| data = [random.uniform(1, 1000) for _ in range(100)] |
| t = self.func(data)[1] |
| self.assertEqual(t+42, self.func(data, 42)[1]) |
| self.assertEqual(t-23, self.func(data, -23)[1]) |
| self.assertEqual(t+Fraction(1e20), self.func(data, 1e20)[1]) |
| |
| def test_strings_fail(self): |
| # Sum of strings should fail. |
| self.assertRaises(TypeError, self.func, [1, 2, 3], '999') |
| self.assertRaises(TypeError, self.func, [1, 2, 3, '999']) |
| |
| def test_bytes_fail(self): |
| # Sum of bytes should fail. |
| self.assertRaises(TypeError, self.func, [1, 2, 3], b'999') |
| self.assertRaises(TypeError, self.func, [1, 2, 3, b'999']) |
| |
| def test_mixed_sum(self): |
| # Mixed input types are not (currently) allowed. |
| # Check that mixed data types fail. |
| self.assertRaises(TypeError, self.func, [1, 2.0, Decimal(1)]) |
| # And so does mixed start argument. |
| self.assertRaises(TypeError, self.func, [1, 2.0], Decimal(1)) |
| |
| |
| class SumTortureTest(NumericTestCase): |
| def test_torture(self): |
| # Tim Peters' torture test for sum, and variants of same. |
| self.assertEqual(statistics._sum([1, 1e100, 1, -1e100]*10000), |
| (float, Fraction(20000.0), 40000)) |
| self.assertEqual(statistics._sum([1e100, 1, 1, -1e100]*10000), |
| (float, Fraction(20000.0), 40000)) |
| T, num, count = statistics._sum([1e-100, 1, 1e-100, -1]*10000) |
| self.assertIs(T, float) |
| self.assertEqual(count, 40000) |
| self.assertApproxEqual(float(num), 2.0e-96, rel=5e-16) |
| |
| |
| class SumSpecialValues(NumericTestCase): |
| # Test that sum works correctly with IEEE-754 special values. |
| |
| def test_nan(self): |
| for type_ in (float, Decimal): |
| nan = type_('nan') |
| result = statistics._sum([1, nan, 2])[1] |
| self.assertIs(type(result), type_) |
| self.assertTrue(math.isnan(result)) |
| |
| def check_infinity(self, x, inf): |
| """Check x is an infinity of the same type and sign as inf.""" |
| self.assertTrue(math.isinf(x)) |
| self.assertIs(type(x), type(inf)) |
| self.assertEqual(x > 0, inf > 0) |
| assert x == inf |
| |
| def do_test_inf(self, inf): |
| # Adding a single infinity gives infinity. |
| result = statistics._sum([1, 2, inf, 3])[1] |
| self.check_infinity(result, inf) |
| # Adding two infinities of the same sign also gives infinity. |
| result = statistics._sum([1, 2, inf, 3, inf, 4])[1] |
| self.check_infinity(result, inf) |
| |
| def test_float_inf(self): |
| inf = float('inf') |
| for sign in (+1, -1): |
| self.do_test_inf(sign*inf) |
| |
| def test_decimal_inf(self): |
| inf = Decimal('inf') |
| for sign in (+1, -1): |
| self.do_test_inf(sign*inf) |
| |
| def test_float_mismatched_infs(self): |
| # Test that adding two infinities of opposite sign gives a NAN. |
| inf = float('inf') |
| result = statistics._sum([1, 2, inf, 3, -inf, 4])[1] |
| self.assertTrue(math.isnan(result)) |
| |
| def test_decimal_extendedcontext_mismatched_infs_to_nan(self): |
| # Test adding Decimal INFs with opposite sign returns NAN. |
| inf = Decimal('inf') |
| data = [1, 2, inf, 3, -inf, 4] |
| with decimal.localcontext(decimal.ExtendedContext): |
| self.assertTrue(math.isnan(statistics._sum(data)[1])) |
| |
| def test_decimal_basiccontext_mismatched_infs_to_nan(self): |
| # Test adding Decimal INFs with opposite sign raises InvalidOperation. |
| inf = Decimal('inf') |
| data = [1, 2, inf, 3, -inf, 4] |
| with decimal.localcontext(decimal.BasicContext): |
| self.assertRaises(decimal.InvalidOperation, statistics._sum, data) |
| |
| @unittest.skipIf(True, "temporarily disabled: see #25928") |
| def test_decimal_snan_raises(self): |
| # Adding sNAN should raise InvalidOperation. |
| sNAN = Decimal('sNAN') |
| data = [1, sNAN, 2] |
| self.assertRaises(decimal.InvalidOperation, statistics._sum, data) |
| |
| |
| # === Tests for averages === |
| |
| class AverageMixin(UnivariateCommonMixin): |
| # Mixin class holding common tests for averages. |
| |
| def test_single_value(self): |
| # Average of a single value is the value itself. |
| for x in (23, 42.5, 1.3e15, Fraction(15, 19), Decimal('0.28')): |
| self.assertEqual(self.func([x]), x) |
| |
| def test_repeated_single_value(self): |
| # The average of a single repeated value is the value itself. |
| for x in (3.5, 17, 2.5e15, Fraction(61, 67), Decimal('4.9712')): |
| for count in (2, 5, 10, 20): |
| data = [x]*count |
| self.assertEqual(self.func(data), x) |
| |
| |
| class TestMean(NumericTestCase, AverageMixin, UnivariateTypeMixin): |
| def setUp(self): |
| self.func = statistics.mean |
| |
| def test_torture_pep(self): |
| # "Torture Test" from PEP-450. |
| self.assertEqual(self.func([1e100, 1, 3, -1e100]), 1) |
| |
| def test_ints(self): |
| # Test mean with ints. |
| data = [0, 1, 2, 3, 3, 3, 4, 5, 5, 6, 7, 7, 7, 7, 8, 9] |
| random.shuffle(data) |
| self.assertEqual(self.func(data), 4.8125) |
| |
| def test_floats(self): |
| # Test mean with floats. |
| data = [17.25, 19.75, 20.0, 21.5, 21.75, 23.25, 25.125, 27.5] |
| random.shuffle(data) |
| self.assertEqual(self.func(data), 22.015625) |
| |
| def test_decimals(self): |
| # Test mean with ints. |
| D = Decimal |
| data = [D("1.634"), D("2.517"), D("3.912"), D("4.072"), D("5.813")] |
| random.shuffle(data) |
| self.assertEqual(self.func(data), D("3.5896")) |
| |
| def test_fractions(self): |
| # Test mean with Fractions. |
| F = Fraction |
| data = [F(1, 2), F(2, 3), F(3, 4), F(4, 5), F(5, 6), F(6, 7), F(7, 8)] |
| random.shuffle(data) |
| self.assertEqual(self.func(data), F(1479, 1960)) |
| |
| def test_inf(self): |
| # Test mean with infinities. |
| raw = [1, 3, 5, 7, 9] # Use only ints, to avoid TypeError later. |
| for kind in (float, Decimal): |
| for sign in (1, -1): |
| inf = kind("inf")*sign |
| data = raw + [inf] |
| result = self.func(data) |
| self.assertTrue(math.isinf(result)) |
| self.assertEqual(result, inf) |
| |
| def test_mismatched_infs(self): |
| # Test mean with infinities of opposite sign. |
| data = [2, 4, 6, float('inf'), 1, 3, 5, float('-inf')] |
| result = self.func(data) |
| self.assertTrue(math.isnan(result)) |
| |
| def test_nan(self): |
| # Test mean with NANs. |
| raw = [1, 3, 5, 7, 9] # Use only ints, to avoid TypeError later. |
| for kind in (float, Decimal): |
| inf = kind("nan") |
| data = raw + [inf] |
| result = self.func(data) |
| self.assertTrue(math.isnan(result)) |
| |
| def test_big_data(self): |
| # Test adding a large constant to every data point. |
| c = 1e9 |
| data = [3.4, 4.5, 4.9, 6.7, 6.8, 7.2, 8.0, 8.1, 9.4] |
| expected = self.func(data) + c |
| assert expected != c |
| result = self.func([x+c for x in data]) |
| self.assertEqual(result, expected) |
| |
| def test_doubled_data(self): |
| # Mean of [a,b,c...z] should be same as for [a,a,b,b,c,c...z,z]. |
| data = [random.uniform(-3, 5) for _ in range(1000)] |
| expected = self.func(data) |
| actual = self.func(data*2) |
| self.assertApproxEqual(actual, expected) |
| |
| def test_regression_20561(self): |
| # Regression test for issue 20561. |
| # See http://bugs.python.org/issue20561 |
| d = Decimal('1e4') |
| self.assertEqual(statistics.mean([d]), d) |
| |
| def test_regression_25177(self): |
| # Regression test for issue 25177. |
| # Ensure very big and very small floats don't overflow. |
| # See http://bugs.python.org/issue25177. |
| self.assertEqual(statistics.mean( |
| [8.988465674311579e+307, 8.98846567431158e+307]), |
| 8.98846567431158e+307) |
| big = 8.98846567431158e+307 |
| tiny = 5e-324 |
| for n in (2, 3, 5, 200): |
| self.assertEqual(statistics.mean([big]*n), big) |
| self.assertEqual(statistics.mean([tiny]*n), tiny) |
| |
| |
| class TestMedian(NumericTestCase, AverageMixin): |
| # Common tests for median and all median.* functions. |
| def setUp(self): |
| self.func = statistics.median |
| |
| def prepare_data(self): |
| """Overload method from UnivariateCommonMixin.""" |
| data = super().prepare_data() |
| if len(data)%2 != 1: |
| data.append(2) |
| return data |
| |
| def test_even_ints(self): |
| # Test median with an even number of int data points. |
| data = [1, 2, 3, 4, 5, 6] |
| assert len(data)%2 == 0 |
| self.assertEqual(self.func(data), 3.5) |
| |
| def test_odd_ints(self): |
| # Test median with an odd number of int data points. |
| data = [1, 2, 3, 4, 5, 6, 9] |
| assert len(data)%2 == 1 |
| self.assertEqual(self.func(data), 4) |
| |
| def test_odd_fractions(self): |
| # Test median works with an odd number of Fractions. |
| F = Fraction |
| data = [F(1, 7), F(2, 7), F(3, 7), F(4, 7), F(5, 7)] |
| assert len(data)%2 == 1 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), F(3, 7)) |
| |
| def test_even_fractions(self): |
| # Test median works with an even number of Fractions. |
| F = Fraction |
| data = [F(1, 7), F(2, 7), F(3, 7), F(4, 7), F(5, 7), F(6, 7)] |
| assert len(data)%2 == 0 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), F(1, 2)) |
| |
| def test_odd_decimals(self): |
| # Test median works with an odd number of Decimals. |
| D = Decimal |
| data = [D('2.5'), D('3.1'), D('4.2'), D('5.7'), D('5.8')] |
| assert len(data)%2 == 1 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), D('4.2')) |
| |
| def test_even_decimals(self): |
| # Test median works with an even number of Decimals. |
| D = Decimal |
| data = [D('1.2'), D('2.5'), D('3.1'), D('4.2'), D('5.7'), D('5.8')] |
| assert len(data)%2 == 0 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), D('3.65')) |
| |
| |
| class TestMedianDataType(NumericTestCase, UnivariateTypeMixin): |
| # Test conservation of data element type for median. |
| def setUp(self): |
| self.func = statistics.median |
| |
| def prepare_data(self): |
| data = list(range(15)) |
| assert len(data)%2 == 1 |
| while data == sorted(data): |
| random.shuffle(data) |
| return data |
| |
| |
| class TestMedianLow(TestMedian, UnivariateTypeMixin): |
| def setUp(self): |
| self.func = statistics.median_low |
| |
| def test_even_ints(self): |
| # Test median_low with an even number of ints. |
| data = [1, 2, 3, 4, 5, 6] |
| assert len(data)%2 == 0 |
| self.assertEqual(self.func(data), 3) |
| |
| def test_even_fractions(self): |
| # Test median_low works with an even number of Fractions. |
| F = Fraction |
| data = [F(1, 7), F(2, 7), F(3, 7), F(4, 7), F(5, 7), F(6, 7)] |
| assert len(data)%2 == 0 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), F(3, 7)) |
| |
| def test_even_decimals(self): |
| # Test median_low works with an even number of Decimals. |
| D = Decimal |
| data = [D('1.1'), D('2.2'), D('3.3'), D('4.4'), D('5.5'), D('6.6')] |
| assert len(data)%2 == 0 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), D('3.3')) |
| |
| |
| class TestMedianHigh(TestMedian, UnivariateTypeMixin): |
| def setUp(self): |
| self.func = statistics.median_high |
| |
| def test_even_ints(self): |
| # Test median_high with an even number of ints. |
| data = [1, 2, 3, 4, 5, 6] |
| assert len(data)%2 == 0 |
| self.assertEqual(self.func(data), 4) |
| |
| def test_even_fractions(self): |
| # Test median_high works with an even number of Fractions. |
| F = Fraction |
| data = [F(1, 7), F(2, 7), F(3, 7), F(4, 7), F(5, 7), F(6, 7)] |
| assert len(data)%2 == 0 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), F(4, 7)) |
| |
| def test_even_decimals(self): |
| # Test median_high works with an even number of Decimals. |
| D = Decimal |
| data = [D('1.1'), D('2.2'), D('3.3'), D('4.4'), D('5.5'), D('6.6')] |
| assert len(data)%2 == 0 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), D('4.4')) |
| |
| |
| class TestMedianGrouped(TestMedian): |
| # Test median_grouped. |
| # Doesn't conserve data element types, so don't use TestMedianType. |
| def setUp(self): |
| self.func = statistics.median_grouped |
| |
| def test_odd_number_repeated(self): |
| # Test median.grouped with repeated median values. |
| data = [12, 13, 14, 14, 14, 15, 15] |
| assert len(data)%2 == 1 |
| self.assertEqual(self.func(data), 14) |
| #--- |
| data = [12, 13, 14, 14, 14, 14, 15] |
| assert len(data)%2 == 1 |
| self.assertEqual(self.func(data), 13.875) |
| #--- |
| data = [5, 10, 10, 15, 20, 20, 20, 20, 25, 25, 30] |
| assert len(data)%2 == 1 |
| self.assertEqual(self.func(data, 5), 19.375) |
| #--- |
| data = [16, 18, 18, 18, 18, 20, 20, 20, 22, 22, 22, 24, 24, 26, 28] |
| assert len(data)%2 == 1 |
| self.assertApproxEqual(self.func(data, 2), 20.66666667, tol=1e-8) |
| |
| def test_even_number_repeated(self): |
| # Test median.grouped with repeated median values. |
| data = [5, 10, 10, 15, 20, 20, 20, 25, 25, 30] |
| assert len(data)%2 == 0 |
| self.assertApproxEqual(self.func(data, 5), 19.16666667, tol=1e-8) |
| #--- |
| data = [2, 3, 4, 4, 4, 5] |
| assert len(data)%2 == 0 |
| self.assertApproxEqual(self.func(data), 3.83333333, tol=1e-8) |
| #--- |
| data = [2, 3, 3, 4, 4, 4, 5, 5, 5, 5, 6, 6] |
| assert len(data)%2 == 0 |
| self.assertEqual(self.func(data), 4.5) |
| #--- |
| data = [3, 4, 4, 4, 5, 5, 5, 5, 6, 6] |
| assert len(data)%2 == 0 |
| self.assertEqual(self.func(data), 4.75) |
| |
| def test_repeated_single_value(self): |
| # Override method from AverageMixin. |
| # Yet again, failure of median_grouped to conserve the data type |
| # causes me headaches :-( |
| for x in (5.3, 68, 4.3e17, Fraction(29, 101), Decimal('32.9714')): |
| for count in (2, 5, 10, 20): |
| data = [x]*count |
| self.assertEqual(self.func(data), float(x)) |
| |
| def test_odd_fractions(self): |
| # Test median_grouped works with an odd number of Fractions. |
| F = Fraction |
| data = [F(5, 4), F(9, 4), F(13, 4), F(13, 4), F(17, 4)] |
| assert len(data)%2 == 1 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), 3.0) |
| |
| def test_even_fractions(self): |
| # Test median_grouped works with an even number of Fractions. |
| F = Fraction |
| data = [F(5, 4), F(9, 4), F(13, 4), F(13, 4), F(17, 4), F(17, 4)] |
| assert len(data)%2 == 0 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), 3.25) |
| |
| def test_odd_decimals(self): |
| # Test median_grouped works with an odd number of Decimals. |
| D = Decimal |
| data = [D('5.5'), D('6.5'), D('6.5'), D('7.5'), D('8.5')] |
| assert len(data)%2 == 1 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), 6.75) |
| |
| def test_even_decimals(self): |
| # Test median_grouped works with an even number of Decimals. |
| D = Decimal |
| data = [D('5.5'), D('5.5'), D('6.5'), D('6.5'), D('7.5'), D('8.5')] |
| assert len(data)%2 == 0 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), 6.5) |
| #--- |
| data = [D('5.5'), D('5.5'), D('6.5'), D('7.5'), D('7.5'), D('8.5')] |
| assert len(data)%2 == 0 |
| random.shuffle(data) |
| self.assertEqual(self.func(data), 7.0) |
| |
| def test_interval(self): |
| # Test median_grouped with interval argument. |
| data = [2.25, 2.5, 2.5, 2.75, 2.75, 3.0, 3.0, 3.25, 3.5, 3.75] |
| self.assertEqual(self.func(data, 0.25), 2.875) |
| data = [2.25, 2.5, 2.5, 2.75, 2.75, 2.75, 3.0, 3.0, 3.25, 3.5, 3.75] |
| self.assertApproxEqual(self.func(data, 0.25), 2.83333333, tol=1e-8) |
| data = [220, 220, 240, 260, 260, 260, 260, 280, 280, 300, 320, 340] |
| self.assertEqual(self.func(data, 20), 265.0) |
| |
| |
| class TestMode(NumericTestCase, AverageMixin, UnivariateTypeMixin): |
| # Test cases for the discrete version of mode. |
| def setUp(self): |
| self.func = statistics.mode |
| |
| def prepare_data(self): |
| """Overload method from UnivariateCommonMixin.""" |
| # Make sure test data has exactly one mode. |
| return [1, 1, 1, 1, 3, 4, 7, 9, 0, 8, 2] |
| |
| def test_range_data(self): |
| # Override test from UnivariateCommonMixin. |
| data = range(20, 50, 3) |
| self.assertRaises(statistics.StatisticsError, self.func, data) |
| |
| def test_nominal_data(self): |
| # Test mode with nominal data. |
| data = 'abcbdb' |
| self.assertEqual(self.func(data), 'b') |
| data = 'fe fi fo fum fi fi'.split() |
| self.assertEqual(self.func(data), 'fi') |
| |
| def test_discrete_data(self): |
| # Test mode with discrete numeric data. |
| data = list(range(10)) |
| for i in range(10): |
| d = data + [i] |
| random.shuffle(d) |
| self.assertEqual(self.func(d), i) |
| |
| def test_bimodal_data(self): |
| # Test mode with bimodal data. |
| data = [1, 1, 2, 2, 2, 2, 3, 4, 5, 6, 6, 6, 6, 7, 8, 9, 9] |
| assert data.count(2) == data.count(6) == 4 |
| # Check for an exception. |
| self.assertRaises(statistics.StatisticsError, self.func, data) |
| |
| def test_unique_data_failure(self): |
| # Test mode exception when data points are all unique. |
| data = list(range(10)) |
| self.assertRaises(statistics.StatisticsError, self.func, data) |
| |
| def test_none_data(self): |
| # Test that mode raises TypeError if given None as data. |
| |
| # This test is necessary because the implementation of mode uses |
| # collections.Counter, which accepts None and returns an empty dict. |
| self.assertRaises(TypeError, self.func, None) |
| |
| def test_counter_data(self): |
| # Test that a Counter is treated like any other iterable. |
| data = collections.Counter([1, 1, 1, 2]) |
| # Since the keys of the counter are treated as data points, not the |
| # counts, this should raise. |
| self.assertRaises(statistics.StatisticsError, self.func, data) |
| |
| |
| |
| # === Tests for variances and standard deviations === |
| |
| class VarianceStdevMixin(UnivariateCommonMixin): |
| # Mixin class holding common tests for variance and std dev. |
| |
| # Subclasses should inherit from this before NumericTestClass, in order |
| # to see the rel attribute below. See testShiftData for an explanation. |
| |
| rel = 1e-12 |
| |
| def test_single_value(self): |
| # Deviation of a single value is zero. |
| for x in (11, 19.8, 4.6e14, Fraction(21, 34), Decimal('8.392')): |
| self.assertEqual(self.func([x]), 0) |
| |
| def test_repeated_single_value(self): |
| # The deviation of a single repeated value is zero. |
| for x in (7.2, 49, 8.1e15, Fraction(3, 7), Decimal('62.4802')): |
| for count in (2, 3, 5, 15): |
| data = [x]*count |
| self.assertEqual(self.func(data), 0) |
| |
| def test_domain_error_regression(self): |
| # Regression test for a domain error exception. |
| # (Thanks to Geremy Condra.) |
| data = [0.123456789012345]*10000 |
| # All the items are identical, so variance should be exactly zero. |
| # We allow some small round-off error, but not much. |
| result = self.func(data) |
| self.assertApproxEqual(result, 0.0, tol=5e-17) |
| self.assertGreaterEqual(result, 0) # A negative result must fail. |
| |
| def test_shift_data(self): |
| # Test that shifting the data by a constant amount does not affect |
| # the variance or stdev. Or at least not much. |
| |
| # Due to rounding, this test should be considered an ideal. We allow |
| # some tolerance away from "no change at all" by setting tol and/or rel |
| # attributes. Subclasses may set tighter or looser error tolerances. |
| raw = [1.03, 1.27, 1.94, 2.04, 2.58, 3.14, 4.75, 4.98, 5.42, 6.78] |
| expected = self.func(raw) |
| # Don't set shift too high, the bigger it is, the more rounding error. |
| shift = 1e5 |
| data = [x + shift for x in raw] |
| self.assertApproxEqual(self.func(data), expected) |
| |
| def test_shift_data_exact(self): |
| # Like test_shift_data, but result is always exact. |
| raw = [1, 3, 3, 4, 5, 7, 9, 10, 11, 16] |
| assert all(x==int(x) for x in raw) |
| expected = self.func(raw) |
| shift = 10**9 |
| data = [x + shift for x in raw] |
| self.assertEqual(self.func(data), expected) |
| |
| def test_iter_list_same(self): |
| # Test that iter data and list data give the same result. |
| |
| # This is an explicit test that iterators and lists are treated the |
| # same; justification for this test over and above the similar test |
| # in UnivariateCommonMixin is that an earlier design had variance and |
| # friends swap between one- and two-pass algorithms, which would |
| # sometimes give different results. |
| data = [random.uniform(-3, 8) for _ in range(1000)] |
| expected = self.func(data) |
| self.assertEqual(self.func(iter(data)), expected) |
| |
| |
| class TestPVariance(VarianceStdevMixin, NumericTestCase, UnivariateTypeMixin): |
| # Tests for population variance. |
| def setUp(self): |
| self.func = statistics.pvariance |
| |
| def test_exact_uniform(self): |
| # Test the variance against an exact result for uniform data. |
| data = list(range(10000)) |
| random.shuffle(data) |
| expected = (10000**2 - 1)/12 # Exact value. |
| self.assertEqual(self.func(data), expected) |
| |
| def test_ints(self): |
| # Test population variance with int data. |
| data = [4, 7, 13, 16] |
| exact = 22.5 |
| self.assertEqual(self.func(data), exact) |
| |
| def test_fractions(self): |
| # Test population variance with Fraction data. |
| F = Fraction |
| data = [F(1, 4), F(1, 4), F(3, 4), F(7, 4)] |
| exact = F(3, 8) |
| result = self.func(data) |
| self.assertEqual(result, exact) |
| self.assertIsInstance(result, Fraction) |
| |
| def test_decimals(self): |
| # Test population variance with Decimal data. |
| D = Decimal |
| data = [D("12.1"), D("12.2"), D("12.5"), D("12.9")] |
| exact = D('0.096875') |
| result = self.func(data) |
| self.assertEqual(result, exact) |
| self.assertIsInstance(result, Decimal) |
| |
| |
| class TestVariance(VarianceStdevMixin, NumericTestCase, UnivariateTypeMixin): |
| # Tests for sample variance. |
| def setUp(self): |
| self.func = statistics.variance |
| |
| def test_single_value(self): |
| # Override method from VarianceStdevMixin. |
| for x in (35, 24.7, 8.2e15, Fraction(19, 30), Decimal('4.2084')): |
| self.assertRaises(statistics.StatisticsError, self.func, [x]) |
| |
| def test_ints(self): |
| # Test sample variance with int data. |
| data = [4, 7, 13, 16] |
| exact = 30 |
| self.assertEqual(self.func(data), exact) |
| |
| def test_fractions(self): |
| # Test sample variance with Fraction data. |
| F = Fraction |
| data = [F(1, 4), F(1, 4), F(3, 4), F(7, 4)] |
| exact = F(1, 2) |
| result = self.func(data) |
| self.assertEqual(result, exact) |
| self.assertIsInstance(result, Fraction) |
| |
| def test_decimals(self): |
| # Test sample variance with Decimal data. |
| D = Decimal |
| data = [D(2), D(2), D(7), D(9)] |
| exact = 4*D('9.5')/D(3) |
| result = self.func(data) |
| self.assertEqual(result, exact) |
| self.assertIsInstance(result, Decimal) |
| |
| |
| class TestPStdev(VarianceStdevMixin, NumericTestCase): |
| # Tests for population standard deviation. |
| def setUp(self): |
| self.func = statistics.pstdev |
| |
| def test_compare_to_variance(self): |
| # Test that stdev is, in fact, the square root of variance. |
| data = [random.uniform(-17, 24) for _ in range(1000)] |
| expected = math.sqrt(statistics.pvariance(data)) |
| self.assertEqual(self.func(data), expected) |
| |
| |
| class TestStdev(VarianceStdevMixin, NumericTestCase): |
| # Tests for sample standard deviation. |
| def setUp(self): |
| self.func = statistics.stdev |
| |
| def test_single_value(self): |
| # Override method from VarianceStdevMixin. |
| for x in (81, 203.74, 3.9e14, Fraction(5, 21), Decimal('35.719')): |
| self.assertRaises(statistics.StatisticsError, self.func, [x]) |
| |
| def test_compare_to_variance(self): |
| # Test that stdev is, in fact, the square root of variance. |
| data = [random.uniform(-2, 9) for _ in range(1000)] |
| expected = math.sqrt(statistics.variance(data)) |
| self.assertEqual(self.func(data), expected) |
| |
| |
| # === Run tests === |
| |
| def load_tests(loader, tests, ignore): |
| """Used for doctest/unittest integration.""" |
| tests.addTests(doctest.DocTestSuite()) |
| return tests |
| |
| |
| if __name__ == "__main__": |
| unittest.main() |