Merged revisions 61239-61249,61252-61257,61260-61264,61269-61275,61278-61279,61285-61286,61288-61290,61298,61303-61305,61312-61314,61317,61329,61332,61344,61350-61351,61363-61376,61378-61379,61382-61383,61387-61388,61392,61395-61396,61402-61403 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r61239 | andrew.kuchling | 2008-03-05 01:44:41 +0100 (Wed, 05 Mar 2008) | 1 line
Add more items; add fragmentary notes
........
r61240 | amaury.forgeotdarc | 2008-03-05 02:50:33 +0100 (Wed, 05 Mar 2008) | 13 lines
Issue#2238: some syntax errors from *args or **kwargs expressions
would give bogus error messages, because of untested exceptions::
>>> f(**g(1=2))
XXX undetected error
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: 'int' object is not iterable
instead of the expected SyntaxError: keyword can't be an expression
Will backport.
........
r61241 | neal.norwitz | 2008-03-05 06:10:48 +0100 (Wed, 05 Mar 2008) | 3 lines
Remove the files/dirs after closing the DB so the tests work on Windows.
Patch from Trent Nelson. Also simplified removing a file by using test_support.
........
r61242 | neal.norwitz | 2008-03-05 06:14:18 +0100 (Wed, 05 Mar 2008) | 3 lines
Get this test to pass even when there is no sound card in the system.
Patch from Trent Nelson. (I can't test this.)
........
r61243 | neal.norwitz | 2008-03-05 06:20:44 +0100 (Wed, 05 Mar 2008) | 3 lines
Catch OSError when trying to remove a file in case removal fails. This
should prevent a failure in tearDown masking any real test failure.
........
r61244 | neal.norwitz | 2008-03-05 06:38:06 +0100 (Wed, 05 Mar 2008) | 5 lines
Make the timeout longer to give slow machines a chance to pass the test
before timing out. This doesn't change the duration of the test under
normal circumstances. This is targetted at fixing the spurious failures
on the FreeBSD buildbot primarily.
........
r61245 | neal.norwitz | 2008-03-05 06:49:03 +0100 (Wed, 05 Mar 2008) | 1 line
Tabs -> spaces
........
r61246 | neal.norwitz | 2008-03-05 06:50:20 +0100 (Wed, 05 Mar 2008) | 1 line
Use -u urlfetch to run more tests
........
r61247 | neal.norwitz | 2008-03-05 06:51:20 +0100 (Wed, 05 Mar 2008) | 1 line
test_smtplib sometimes reports leaks too, suppress it
........
r61248 | jeffrey.yasskin | 2008-03-05 07:19:56 +0100 (Wed, 05 Mar 2008) | 5 lines
Fix test_socketserver on Windows after r61099 added several signal.alarm()
calls (which don't exist on non-Unix platforms).
Thanks to Trent Nelson for the report and patch.
........
r61249 | georg.brandl | 2008-03-05 08:10:35 +0100 (Wed, 05 Mar 2008) | 2 lines
Fix some rst.
........
r61252 | thomas.heller | 2008-03-05 15:53:39 +0100 (Wed, 05 Mar 2008) | 2 lines
News entry for yesterdays commit.
........
r61253 | thomas.heller | 2008-03-05 16:34:29 +0100 (Wed, 05 Mar 2008) | 3 lines
Issue 1872: Changed the struct module typecode from 't' to '?', for
compatibility with PEP3118.
........
r61254 | skip.montanaro | 2008-03-05 17:41:09 +0100 (Wed, 05 Mar 2008) | 4 lines
Elaborate on the role of the altinstall target when installing multiple
versions.
........
r61255 | georg.brandl | 2008-03-05 20:31:44 +0100 (Wed, 05 Mar 2008) | 2 lines
#2239: PYTHONPATH delimiter is os.pathsep.
........
r61256 | raymond.hettinger | 2008-03-05 21:59:58 +0100 (Wed, 05 Mar 2008) | 1 line
C implementation of itertools.permutations().
........
r61257 | raymond.hettinger | 2008-03-05 22:04:32 +0100 (Wed, 05 Mar 2008) | 1 line
Small code cleanup.
........
r61260 | martin.v.loewis | 2008-03-05 23:24:31 +0100 (Wed, 05 Mar 2008) | 2 lines
cd PCbuild only after deleting all pyc files.
........
r61261 | raymond.hettinger | 2008-03-06 02:15:52 +0100 (Thu, 06 Mar 2008) | 1 line
Add examples.
........
r61262 | andrew.kuchling | 2008-03-06 02:36:27 +0100 (Thu, 06 Mar 2008) | 1 line
Add two items
........
r61263 | georg.brandl | 2008-03-06 07:47:18 +0100 (Thu, 06 Mar 2008) | 2 lines
#1725737: ignore other VC directories other than CVS and SVN's too.
........
r61264 | martin.v.loewis | 2008-03-06 07:55:22 +0100 (Thu, 06 Mar 2008) | 4 lines
Patch #2232: os.tmpfile might fail on Windows if the user has no
permission to create files in the root directory.
Will backport to 2.5.
........
r61269 | georg.brandl | 2008-03-06 08:19:15 +0100 (Thu, 06 Mar 2008) | 2 lines
Expand on re.split behavior with captured expressions.
........
r61270 | georg.brandl | 2008-03-06 08:22:09 +0100 (Thu, 06 Mar 2008) | 2 lines
Little clarification of assignments.
........
r61271 | georg.brandl | 2008-03-06 08:31:34 +0100 (Thu, 06 Mar 2008) | 2 lines
Add isinstance/issubclass to tutorial.
........
r61272 | georg.brandl | 2008-03-06 08:34:52 +0100 (Thu, 06 Mar 2008) | 2 lines
Add missing NEWS entry for r61263.
........
r61273 | georg.brandl | 2008-03-06 08:41:16 +0100 (Thu, 06 Mar 2008) | 2 lines
#2225: return nonzero status code from py_compile if not all files could be compiled.
........
r61274 | georg.brandl | 2008-03-06 08:43:02 +0100 (Thu, 06 Mar 2008) | 2 lines
#2220: handle matching failure more gracefully.
........
r61275 | georg.brandl | 2008-03-06 08:45:52 +0100 (Thu, 06 Mar 2008) | 2 lines
Bug #2220: handle rlcompleter attribute match failure more gracefully.
........
r61278 | martin.v.loewis | 2008-03-06 14:49:47 +0100 (Thu, 06 Mar 2008) | 1 line
Rely on x64 platform configuration when building _bsddb on AMD64.
........
r61279 | martin.v.loewis | 2008-03-06 14:50:28 +0100 (Thu, 06 Mar 2008) | 1 line
Update db-4.4.20 build procedure.
........
r61285 | raymond.hettinger | 2008-03-06 21:52:01 +0100 (Thu, 06 Mar 2008) | 1 line
More tests.
........
r61286 | raymond.hettinger | 2008-03-06 23:51:36 +0100 (Thu, 06 Mar 2008) | 1 line
Issue 2246: itertools grouper object did not participate in GC (should be backported).
........
r61288 | raymond.hettinger | 2008-03-07 02:33:20 +0100 (Fri, 07 Mar 2008) | 1 line
Tweak recipes and tests
........
r61289 | jeffrey.yasskin | 2008-03-07 07:22:15 +0100 (Fri, 07 Mar 2008) | 5 lines
Progress on issue #1193577 by adding a polling .shutdown() method to
SocketServers. The core of the patch was written by Pedro Werneck, but any bugs
are mine. I've also rearranged the code for timeouts in order to avoid
interfering with the shutdown poll.
........
r61290 | nick.coghlan | 2008-03-07 15:13:28 +0100 (Fri, 07 Mar 2008) | 1 line
Speed up with statements by storing the __exit__ method on the stack instead of in a temp variable (bumps the magic number for pyc files)
........
r61298 | andrew.kuchling | 2008-03-07 22:09:23 +0100 (Fri, 07 Mar 2008) | 1 line
Grammar fix
........
r61303 | georg.brandl | 2008-03-08 10:54:06 +0100 (Sat, 08 Mar 2008) | 2 lines
#2253: fix continue vs. finally docs.
........
r61304 | marc-andre.lemburg | 2008-03-08 11:01:43 +0100 (Sat, 08 Mar 2008) | 3 lines
Add new name for Mandrake: Mandriva.
........
r61305 | georg.brandl | 2008-03-08 11:05:24 +0100 (Sat, 08 Mar 2008) | 2 lines
#1533486: fix types in refcount intro.
........
r61312 | facundo.batista | 2008-03-08 17:50:27 +0100 (Sat, 08 Mar 2008) | 5 lines
Issue 1106316. post_mortem()'s parameter, traceback, is now
optional: it defaults to the traceback of the exception that is currently
being handled.
........
r61313 | jeffrey.yasskin | 2008-03-08 19:26:54 +0100 (Sat, 08 Mar 2008) | 2 lines
Add tests for with and finally performance to pybench.
........
r61314 | jeffrey.yasskin | 2008-03-08 21:08:21 +0100 (Sat, 08 Mar 2008) | 2 lines
Fix pybench for pythons < 2.6, tested back to 2.3.
........
r61317 | jeffrey.yasskin | 2008-03-08 22:35:15 +0100 (Sat, 08 Mar 2008) | 3 lines
Well that was dumb. platform.python_implementation returns a function, not a
string.
........
r61329 | georg.brandl | 2008-03-09 16:11:39 +0100 (Sun, 09 Mar 2008) | 2 lines
#2249: document assertTrue and assertFalse.
........
r61332 | neal.norwitz | 2008-03-09 20:03:42 +0100 (Sun, 09 Mar 2008) | 4 lines
Introduce a lock to fix a race condition which caused an exception in the test.
Some buildbots were consistently failing (e.g., amd64).
Also remove a couple of semi-colons.
........
r61344 | raymond.hettinger | 2008-03-11 01:19:07 +0100 (Tue, 11 Mar 2008) | 1 line
Add recipe to docs.
........
r61350 | guido.van.rossum | 2008-03-11 22:18:06 +0100 (Tue, 11 Mar 2008) | 3 lines
Fix the overflows in expandtabs(). "This time for sure!"
(Exploit at request.)
........
r61351 | raymond.hettinger | 2008-03-11 22:37:46 +0100 (Tue, 11 Mar 2008) | 1 line
Improve docs for itemgetter(). Show that it works with slices.
........
r61363 | georg.brandl | 2008-03-13 08:15:56 +0100 (Thu, 13 Mar 2008) | 2 lines
#2265: fix example.
........
r61364 | georg.brandl | 2008-03-13 08:17:14 +0100 (Thu, 13 Mar 2008) | 2 lines
#2270: fix typo.
........
r61365 | georg.brandl | 2008-03-13 08:21:41 +0100 (Thu, 13 Mar 2008) | 2 lines
#1720705: add docs about import/threading interaction, wording by Nick.
........
r61366 | andrew.kuchling | 2008-03-13 12:07:35 +0100 (Thu, 13 Mar 2008) | 1 line
Add class decorators
........
r61367 | raymond.hettinger | 2008-03-13 17:43:17 +0100 (Thu, 13 Mar 2008) | 1 line
Add 2-to-3 support for the itertools moved to builtins or renamed.
........
r61368 | raymond.hettinger | 2008-03-13 17:43:59 +0100 (Thu, 13 Mar 2008) | 1 line
Consistent tense.
........
r61369 | raymond.hettinger | 2008-03-13 20:03:51 +0100 (Thu, 13 Mar 2008) | 1 line
Issue 2274: Add heapq.heappushpop().
........
r61370 | raymond.hettinger | 2008-03-13 20:33:34 +0100 (Thu, 13 Mar 2008) | 1 line
Simplify the nlargest() code using heappushpop().
........
r61371 | brett.cannon | 2008-03-13 21:27:00 +0100 (Thu, 13 Mar 2008) | 4 lines
Move test_thread over to unittest. Commits GHOP 237.
Thanks Benjamin Peterson for the patch.
........
r61372 | brett.cannon | 2008-03-13 21:33:10 +0100 (Thu, 13 Mar 2008) | 4 lines
Move test_tokenize to doctest.
Done as GHOP 238 by Josip Dzolonga.
........
r61373 | brett.cannon | 2008-03-13 21:47:41 +0100 (Thu, 13 Mar 2008) | 4 lines
Convert test_contains, test_crypt, and test_select to unittest.
Patch from GHOP 294 by David Marek.
........
r61374 | brett.cannon | 2008-03-13 22:02:16 +0100 (Thu, 13 Mar 2008) | 4 lines
Move test_gdbm to use unittest.
Closes issue #1960. Thanks Giampaolo Rodola.
........
r61375 | brett.cannon | 2008-03-13 22:09:28 +0100 (Thu, 13 Mar 2008) | 4 lines
Convert test_fcntl to unittest.
Closes issue #2055. Thanks Giampaolo Rodola.
........
r61376 | raymond.hettinger | 2008-03-14 06:03:44 +0100 (Fri, 14 Mar 2008) | 1 line
Leave heapreplace() unchanged.
........
r61378 | martin.v.loewis | 2008-03-14 14:56:09 +0100 (Fri, 14 Mar 2008) | 2 lines
Patch #2284: add -x64 option to rt.bat.
........
r61379 | martin.v.loewis | 2008-03-14 14:57:59 +0100 (Fri, 14 Mar 2008) | 2 lines
Use -x64 flag.
........
r61382 | brett.cannon | 2008-03-14 15:03:10 +0100 (Fri, 14 Mar 2008) | 2 lines
Remove a bad test.
........
r61383 | mark.dickinson | 2008-03-14 15:23:37 +0100 (Fri, 14 Mar 2008) | 9 lines
Issue 705836: Fix struct.pack(">f", 1e40) to behave consistently
across platforms: it should now raise OverflowError on all
platforms. (Previously it raised OverflowError only on
non IEEE 754 platforms.)
Also fix the (already existing) test for this behaviour
so that it actually raises TestFailed instead of just
referencing it.
........
r61387 | thomas.heller | 2008-03-14 22:06:21 +0100 (Fri, 14 Mar 2008) | 1 line
Remove unneeded initializer.
........
r61388 | martin.v.loewis | 2008-03-14 22:19:28 +0100 (Fri, 14 Mar 2008) | 2 lines
Run debug version, cd to PCbuild.
........
r61392 | georg.brandl | 2008-03-15 00:10:34 +0100 (Sat, 15 Mar 2008) | 2 lines
Remove obsolete paragraph. #2288.
........
r61395 | georg.brandl | 2008-03-15 01:20:19 +0100 (Sat, 15 Mar 2008) | 2 lines
Fix lots of broken links in the docs, found by Sphinx' external link checker.
........
r61396 | skip.montanaro | 2008-03-15 03:32:49 +0100 (Sat, 15 Mar 2008) | 1 line
note that fork and forkpty raise OSError on failure
........
r61402 | skip.montanaro | 2008-03-15 17:04:45 +0100 (Sat, 15 Mar 2008) | 1 line
add %f format to datetime - issue 1158
........
r61403 | skip.montanaro | 2008-03-15 17:07:11 +0100 (Sat, 15 Mar 2008) | 2 lines
.
........
diff --git a/Doc/bugs.rst b/Doc/bugs.rst
index 8b8df81..9abe50c 100644
--- a/Doc/bugs.rst
+++ b/Doc/bugs.rst
@@ -53,7 +53,7 @@
Article which goes into some detail about how to create a useful bug report.
This describes what kind of information is useful and why it is useful.
- `Bug Writing Guidelines <http://www.mozilla.org/quality/bug-writing-guidelines.html>`_
+ `Bug Writing Guidelines <http://developer.mozilla.org/en/docs/Bug_writing_guidelines>`_
Information about writing a good bug report. Some of this is specific to the
Mozilla project, but describes general good practices.
diff --git a/Doc/c-api/intro.rst b/Doc/c-api/intro.rst
index 2742a53..d165f16 100644
--- a/Doc/c-api/intro.rst
+++ b/Doc/c-api/intro.rst
@@ -137,7 +137,7 @@
object type, such as a list, as well as performing any additional finalization
that's needed. There's no chance that the reference count can overflow; at
least as many bits are used to hold the reference count as there are distinct
-memory locations in virtual memory (assuming ``sizeof(long) >= sizeof(char*)``).
+memory locations in virtual memory (assuming ``sizeof(Py_ssize_t) >= sizeof(void*)``).
Thus, the reference count increment is a simple operation.
It is not necessary to increment an object's reference count for every local
diff --git a/Doc/distutils/apiref.rst b/Doc/distutils/apiref.rst
index 6c2be3e..36684e2 100644
--- a/Doc/distutils/apiref.rst
+++ b/Doc/distutils/apiref.rst
@@ -73,7 +73,7 @@
+--------------------+--------------------------------+-------------------------------------------------------------+
| *classifiers* | A list of categories for the | The list of available |
| | package | categorizations is at |
- | | | http://cheeseshop.python.org/pypi?:action=list_classifiers. |
+ | | | http://pypi.python.org/pypi?:action=list_classifiers. |
+--------------------+--------------------------------+-------------------------------------------------------------+
| *distclass* | the :class:`Distribution` | A subclass of |
| | class to use | :class:`distutils.core.Distribution` |
diff --git a/Doc/distutils/examples.rst b/Doc/distutils/examples.rst
index 4e4adc5..d937b83 100644
--- a/Doc/distutils/examples.rst
+++ b/Doc/distutils/examples.rst
@@ -11,7 +11,7 @@
.. seealso::
- `Distutils Cookbook <http://www.python.org/cgi-bin/moinmoin/DistutilsCookbook>`_
+ `Distutils Cookbook <http://wiki.python.org/moin/DistutilsCookbook>`_
Collection of recipes showing how to achieve more control over distutils.
diff --git a/Doc/distutils/setupscript.rst b/Doc/distutils/setupscript.rst
index 7c65821..3cc1da9 100644
--- a/Doc/distutils/setupscript.rst
+++ b/Doc/distutils/setupscript.rst
@@ -578,7 +578,7 @@
(4)
These fields should not be used if your package is to be compatible with Python
versions prior to 2.2.3 or 2.3. The list is available from the `PyPI website
- <http://www.python.org/pypi>`_.
+ <http://pypi.python.org/pypi>`_.
'short string'
A single line of text, not more than 200 characters.
diff --git a/Doc/distutils/sourcedist.rst b/Doc/distutils/sourcedist.rst
index 9f15870..960cc0a 100644
--- a/Doc/distutils/sourcedist.rst
+++ b/Doc/distutils/sourcedist.rst
@@ -122,7 +122,8 @@
* all files in the Distutils "build" tree (default :file:`build/`)
-* all files in directories named :file:`RCS`, :file:`CVS` or :file:`.svn`
+* all files in directories named :file:`RCS`, :file:`CVS`, :file:`.svn`,
+ :file:`.hg`, :file:`.git`, :file:`.bzr` or :file:`_darcs`
Now we have our complete list of files, which is written to the manifest for
future reference, and then used to build the source distribution archive(s).
@@ -156,8 +157,9 @@
previous two steps, so it's important that the ``prune`` command in the manifest
template comes after the ``recursive-include`` command
-#. exclude the entire :file:`build` tree, and any :file:`RCS`, :file:`CVS` and
- :file:`.svn` directories
+#. exclude the entire :file:`build` tree, and any :file:`RCS`, :file:`CVS`,
+ :file:`.svn`, :file:`.hg`, :file:`.git`, :file:`.bzr` and :file:`_darcs`
+ directories
Just like in the setup script, file and directory names in the manifest template
should always be slash-separated; the Distutils will take care of converting
diff --git a/Doc/documenting/style.rst b/Doc/documenting/style.rst
index 5d0ccb7..5821bd8 100644
--- a/Doc/documenting/style.rst
+++ b/Doc/documenting/style.rst
@@ -66,5 +66,5 @@
1970s.
-.. _Apple Publications Style Guide: http://developer.apple.com/documentation/UserExperience/Conceptual/APStyleGuide/AppleStyleGuide2003.pdf
+.. _Apple Publications Style Guide: http://developer.apple.com/documentation/UserExperience/Conceptual/APStyleGuide/AppleStyleGuide2006.pdf
diff --git a/Doc/howto/advocacy.rst b/Doc/howto/advocacy.rst
index 8b5b11c..d71e1ec 100644
--- a/Doc/howto/advocacy.rst
+++ b/Doc/howto/advocacy.rst
@@ -346,7 +346,7 @@
wasn't written commercially. This site presents arguments that show how open
source software can have considerable advantages over closed-source software.
-http://sunsite.unc.edu/LDP/HOWTO/mini/Advocacy.html
+http://www.faqs.org/docs/Linux-mini/Advocacy.html
The Linux Advocacy mini-HOWTO was the inspiration for this document, and is also
well worth reading for general suggestions on winning acceptance for a new
technology, such as Linux or Python. In general, you won't make much progress
diff --git a/Doc/howto/curses.rst b/Doc/howto/curses.rst
index 841a030..b56b2c8 100644
--- a/Doc/howto/curses.rst
+++ b/Doc/howto/curses.rst
@@ -52,7 +52,7 @@
No one has made a Windows port of the curses module. On a Windows platform, try
the Console module written by Fredrik Lundh. The Console module provides
cursor-addressable text output, plus full support for mouse and keyboard input,
-and is available from http://effbot.org/efflib/console.
+and is available from http://effbot.org/zone/console-index.htm.
The Python curses module
@@ -432,5 +432,5 @@
If you write an interesting little program, feel free to contribute it as
another demo. We can always use more of them!
-The ncurses FAQ: http://dickey.his.com/ncurses/ncurses.faq.html
+The ncurses FAQ: http://invisible-island.net/ncurses/ncurses.faq.html
diff --git a/Doc/howto/regex.rst b/Doc/howto/regex.rst
index 40f5fdb..d83665f 100644
--- a/Doc/howto/regex.rst
+++ b/Doc/howto/regex.rst
@@ -367,8 +367,8 @@
Python distribution. It allows you to enter REs and strings, and displays
whether the RE matches or fails. :file:`redemo.py` can be quite useful when
trying to debug a complicated RE. Phil Schwartz's `Kodos
-<http://www.phil-schwartz.com/kodos.spy>`_ is also an interactive tool for
-developing and testing RE patterns.
+<http://kodos.sourceforge.net/>`_ is also an interactive tool for developing and
+testing RE patterns.
This HOWTO uses the standard Python interpreter for its examples. First, run the
Python interpreter, import the :mod:`re` module, and compile a RE::
diff --git a/Doc/howto/unicode.rst b/Doc/howto/unicode.rst
index 67aa2b2..454d25e 100644
--- a/Doc/howto/unicode.rst
+++ b/Doc/howto/unicode.rst
@@ -216,10 +216,6 @@
to reading the Unicode character tables, available at
<http://www.cs.tut.fi/~jkorpela/unicode/guide.html>.
-Roman Czyborra wrote another explanation of Unicode's basic principles; it's at
-<http://czyborra.com/unicode/characters.html>. Czyborra has written a number of
-other Unicode-related documentation, available from <http://www.cyzborra.com>.
-
Two other good introductory articles were written by Joel Spolsky
<http://www.joelonsoftware.com/articles/Unicode.html> and Jason Orendorff
<http://www.jorendorff.com/articles/unicode/>. If this introduction didn't make
@@ -429,7 +425,7 @@
Marc-André Lemburg gave a presentation at EuroPython 2002 titled "Python and
Unicode". A PDF version of his slides is available at
-<http://www.egenix.com/files/python/Unicode-EPC2002-Talk.pdf>, and is an
+<http://downloads.egenix.com/python/Unicode-EPC2002-Talk.pdf>, and is an
excellent overview of the design of Python's Unicode features.
@@ -616,7 +612,7 @@
The PDF slides for Marc-André Lemburg's presentation "Writing Unicode-aware
Applications in Python" are available at
-<http://www.egenix.com/files/python/LSM2005-Developing-Unicode-aware-applications-in-Python.pdf>
+<http://downloads.egenix.com/python/LSM2005-Developing-Unicode-aware-applications-in-Python.pdf>
and discuss questions of character encodings as well as how to internationalize
and localize an application.
diff --git a/Doc/howto/urllib2.rst b/Doc/howto/urllib2.rst
index 05588b9..4ba3932 100644
--- a/Doc/howto/urllib2.rst
+++ b/Doc/howto/urllib2.rst
@@ -8,7 +8,7 @@
There is an French translation of an earlier revision of this
HOWTO, available at `urllib2 - Le Manuel manquant
- <http://www.voidspace/python/articles/urllib2_francais.shtml>`_.
+ <http://www.voidspace.org.uk/python/articles/urllib2_francais.shtml>`_.
diff --git a/Doc/install/index.rst b/Doc/install/index.rst
index c830c8d..d83e3f2 100644
--- a/Doc/install/index.rst
+++ b/Doc/install/index.rst
@@ -869,10 +869,10 @@
-Borland C++
-^^^^^^^^^^^
+Borland/CodeGear C++
+^^^^^^^^^^^^^^^^^^^^
-This subsection describes the necessary steps to use Distutils with the Borland
+This subsection describes the necessary steps to use Distutils with the Borland
C++ compiler version 5.5. First you have to know that Borland's object file
format (OMF) is different from the format used by the Python version you can
download from the Python or ActiveState Web site. (Python is built with
@@ -912,7 +912,7 @@
.. seealso::
- `C++Builder Compiler <http://www.borland.com/bcppbuilder/freecompiler/>`_
+ `C++Builder Compiler <http://www.codegear.com/downloads/free/cppbuilder>`_
Information about the free C++ compiler from Borland, including links to the
download pages.
@@ -935,9 +935,7 @@
These compilers require some special libraries. This task is more complex than
for Borland's C++, because there is no program to convert the library. First
you have to create a list of symbols which the Python DLL exports. (You can find
-a good program for this task at
-http://starship.python.net/crew/kernr/mingw32/Notes.html, see at PExports 0.42h
-there.)
+a good program for this task at http://www.emmestech.com/software/cygwin/pexports-0.43/download_pexports.html)
.. I don't understand what the next line means. --amk
.. (inclusive the references on data structures.)
@@ -981,9 +979,6 @@
`Building Python modules on MS Windows platform with MinGW <http://www.zope.org/Members/als/tips/win32_mingw_modules>`_
Information about building the required libraries for the MinGW environment.
- http://pyopengl.sourceforge.net/ftp/win32-stuff/
- Converted import libraries in Cygwin/MinGW and Borland format, and a script to
- create the registry entries needed for Distutils to locate the built Python.
.. rubric:: Footnotes
diff --git a/Doc/library/aepack.rst b/Doc/library/aepack.rst
index daaa9b2..d8aef6b 100644
--- a/Doc/library/aepack.rst
+++ b/Doc/library/aepack.rst
@@ -84,7 +84,3 @@
Module :mod:`aetypes`
Python definitions of codes for Apple Event descriptor types.
-
- `Inside Macintosh: Interapplication Communication <http://developer.apple.com/techpubs/mac/IAC/IAC-2.html>`_
- Information about inter-process communications on the Macintosh.
-
diff --git a/Doc/library/cookielib.rst b/Doc/library/cookielib.rst
index bc14051..f6008f1 100644
--- a/Doc/library/cookielib.rst
+++ b/Doc/library/cookielib.rst
@@ -117,7 +117,7 @@
Extensions to this module, including a class for reading Microsoft Internet
Explorer cookies on Windows.
- http://www.netscape.com/newsref/std/cookie_spec.html
+ http://wp.netscape.com/newsref/std/cookie_spec.html
The specification of the original Netscape cookie protocol. Though this is
still the dominant protocol, the 'Netscape cookie protocol' implemented by all
the major browsers (and :mod:`cookielib`) only bears a passing resemblance to
diff --git a/Doc/library/datetime.rst b/Doc/library/datetime.rst
index 3fad2fb..8db1cb5 100644
--- a/Doc/library/datetime.rst
+++ b/Doc/library/datetime.rst
@@ -1486,9 +1486,31 @@
be used, as time objects have no such values. If they're used anyway, ``1900``
is substituted for the year, and ``0`` for the month and day.
-For :class:`date` objects, the format codes for hours, minutes, and seconds
-should not be used, as :class:`date` objects have no such values. If they're
-used anyway, ``0`` is substituted for them.
+For :class:`date` objects, the format codes for hours, minutes, seconds, and
+microseconds should not be used, as :class:`date` objects have no such
+values. If they're used anyway, ``0`` is substituted for them.
+
+:class:`time` and :class:`datetime` objects support a ``%f`` format code
+which expands to the number of microseconds in the object, zero-padded on
+the left to six places.
+
+.. versionadded:: 2.6
+
+For a naive object, the ``%z`` and ``%Z`` format codes are replaced by empty
+strings.
+
+For an aware object:
+
+``%z``
+ :meth:`utcoffset` is transformed into a 5-character string of the form +HHMM or
+ -HHMM, where HH is a 2-digit string giving the number of UTC offset hours, and
+ MM is a 2-digit string giving the number of UTC offset minutes. For example, if
+ :meth:`utcoffset` returns ``timedelta(hours=-3, minutes=-30)``, ``%z`` is
+ replaced with the string ``'-0330'``.
+
+``%Z``
+ If :meth:`tzname` returns ``None``, ``%Z`` is replaced by an empty string.
+ Otherwise ``%Z`` is replaced by the returned value, which must be a string.
The full set of format codes supported varies across platforms, because Python
calls the platform C library's :func:`strftime` function, and platform
@@ -1521,6 +1543,10 @@
| ``%d`` | Day of the month as a decimal | |
| | number [01,31]. | |
+-----------+--------------------------------+-------+
+| ``%f`` | Microsecond as a decimal | \(1) |
+| | number [0,999999], zero-padded | |
+| | on the left | |
++-----------+--------------------------------+-------+
| ``%H`` | Hour (24-hour clock) as a | |
| | decimal number [00,23]. | |
+-----------+--------------------------------+-------+
@@ -1536,13 +1562,13 @@
| ``%M`` | Minute as a decimal number | |
| | [00,59]. | |
+-----------+--------------------------------+-------+
-| ``%p`` | Locale's equivalent of either | \(1) |
+| ``%p`` | Locale's equivalent of either | \(2) |
| | AM or PM. | |
+-----------+--------------------------------+-------+
-| ``%S`` | Second as a decimal number | \(2) |
+| ``%S`` | Second as a decimal number | \(3) |
| | [00,61]. | |
+-----------+--------------------------------+-------+
-| ``%U`` | Week number of the year | \(3) |
+| ``%U`` | Week number of the year | \(4) |
| | (Sunday as the first day of | |
| | the week) as a decimal number | |
| | [00,53]. All days in a new | |
@@ -1553,7 +1579,7 @@
| ``%w`` | Weekday as a decimal number | |
| | [0(Sunday),6]. | |
+-----------+--------------------------------+-------+
-| ``%W`` | Week number of the year | \(3) |
+| ``%W`` | Week number of the year | \(4) |
| | (Monday as the first day of | |
| | the week) as a decimal number | |
| | [00,53]. All days in a new | |
@@ -1573,7 +1599,7 @@
| ``%Y`` | Year with century as a decimal | |
| | number. | |
+-----------+--------------------------------+-------+
-| ``%z`` | UTC offset in the form +HHMM | \(4) |
+| ``%z`` | UTC offset in the form +HHMM | \(5) |
| | or -HHMM (empty string if the | |
| | the object is naive). | |
+-----------+--------------------------------+-------+
@@ -1586,17 +1612,22 @@
Notes:
(1)
+ When used with the :func:`strptime` function, the ``%f`` directive
+ accepts from one to six digits and zero pads on the right. ``%f`` is
+ an extension to the set of format characters in the C standard.
+
+(2)
When used with the :func:`strptime` function, the ``%p`` directive only affects
the output hour field if the ``%I`` directive is used to parse the hour.
-(2)
+(3)
The range really is ``0`` to ``61``; this accounts for leap seconds and the
(very rare) double leap seconds.
-(3)
+(4)
When used with the :func:`strptime` function, ``%U`` and ``%W`` are only used in
calculations when the day of the week and the year are specified.
-(4)
+(5)
For example, if :meth:`utcoffset` returns ``timedelta(hours=-3, minutes=-30)``,
``%z`` is replaced with the string ``'-0330'``.
diff --git a/Doc/library/dis.rst b/Doc/library/dis.rst
index 5b09847..3af9250 100644
--- a/Doc/library/dis.rst
+++ b/Doc/library/dis.rst
@@ -412,21 +412,24 @@
.. opcode:: WITH_CLEANUP ()
- Cleans up the stack when a :keyword:`with` statement block exits. TOS is the
- context manager's :meth:`__exit__` bound method. Below that are 1--3 values
- indicating how/why the finally clause was entered:
+ Cleans up the stack when a :keyword:`with` statement block exits. On top of
+ the stack are 1--3 values indicating how/why the finally clause was entered:
- * SECOND = ``None``
- * (SECOND, THIRD) = (``WHY_{RETURN,CONTINUE}``), retval
- * SECOND = ``WHY_*``; no retval below it
- * (SECOND, THIRD, FOURTH) = exc_info()
+ * TOP = ``None``
+ * (TOP, SECOND) = (``WHY_{RETURN,CONTINUE}``), retval
+ * TOP = ``WHY_*``; no retval below it
+ * (TOP, SECOND, THIRD) = exc_info()
- In the last case, ``TOS(SECOND, THIRD, FOURTH)`` is called, otherwise
- ``TOS(None, None, None)``.
+ Under them is EXIT, the context manager's :meth:`__exit__` bound method.
- In addition, if the stack represents an exception, *and* the function call
- returns a 'true' value, this information is "zapped", to prevent ``END_FINALLY``
- from re-raising the exception. (But non-local gotos should still be resumed.)
+ In the last case, ``EXIT(TOP, SECOND, THIRD)`` is called, otherwise
+ ``EXIT(None, None, None)``.
+
+ EXIT is removed from the stack, leaving the values above it in the same
+ order. In addition, if the stack represents an exception, *and* the function
+ call returns a 'true' value, this information is "zapped", to prevent
+ ``END_FINALLY`` from re-raising the exception. (But non-local gotos should
+ still be resumed.)
.. XXX explain the WHY stuff!
diff --git a/Doc/library/email.message.rst b/Doc/library/email.message.rst
index 7f3cf6f..2b0df34 100644
--- a/Doc/library/email.message.rst
+++ b/Doc/library/email.message.rst
@@ -38,7 +38,7 @@
.. method:: Message.as_string([unixfrom])
- Return the entire message flatten as a string. When optional *unixfrom* is
+ Return the entire message flattened as a string. When optional *unixfrom* is
``True``, the envelope header is included in the returned string. *unixfrom*
defaults to ``False``.
diff --git a/Doc/library/heapq.rst b/Doc/library/heapq.rst
index f26d29b..1530144 100644
--- a/Doc/library/heapq.rst
+++ b/Doc/library/heapq.rst
@@ -43,6 +43,13 @@
Pop and return the smallest item from the *heap*, maintaining the heap
invariant. If the heap is empty, :exc:`IndexError` is raised.
+.. function:: heappushpop(heap, item)
+
+ Push *item* on the heap, then pop and return the smallest item from the
+ *heap*. The combined action runs more efficiently than :func:`heappush`
+ followed by a separate call to :func:`heappop`.
+
+ .. versionadded:: 2.6
.. function:: heapify(x)
diff --git a/Doc/library/imaplib.rst b/Doc/library/imaplib.rst
index 10f3a42..01249b2 100644
--- a/Doc/library/imaplib.rst
+++ b/Doc/library/imaplib.rst
@@ -116,7 +116,7 @@
Documents describing the protocol, and sources and binaries for servers
implementing it, can all be found at the University of Washington's *IMAP
- Information Center* (http://www.cac.washington.edu/imap/).
+ Information Center* (http://www.washington.edu/imap/).
.. _imap4-objects:
diff --git a/Doc/library/mailbox.rst b/Doc/library/mailbox.rst
index e05f44a..b5773f4 100644
--- a/Doc/library/mailbox.rst
+++ b/Doc/library/mailbox.rst
@@ -403,7 +403,7 @@
Notes on Maildir by its inventor. Includes an updated name-creation scheme and
details on "info" semantics.
- `maildir man page from Courier <http://www.courier-mta.org/?maildir.html>`_
+ `maildir man page from Courier <http://www.courier-mta.org/maildir.html>`_
Another specification of the format. Describes a common extension for supporting
folders.
@@ -460,7 +460,7 @@
`mbox man page from tin <http://www.tin.org/bin/man.cgi?section=5&topic=mbox>`_
Another specification of the format, with details on locking.
- `Configuring Netscape Mail on Unix: Why The Content-Length Format is Bad <http://home.netscape.com/eng/mozilla/2.0/relnotes/demo/content-length.html>`_
+ `Configuring Netscape Mail on Unix: Why The Content-Length Format is Bad <http://www.jwz.org/doc/content-length.html>`_
An argument for using the original mbox format rather than a variation.
`"mbox" is a family of several mutually incompatible mailbox formats <http://homepages.tesco.net./~J.deBoynePollard/FGA/mail-mbox-formats.html>`_
@@ -664,7 +664,7 @@
`Format of Version 5 Babyl Files <http://quimby.gnus.org/notes/BABYL>`_
A specification of the Babyl format.
- `Reading Mail with Rmail <http://www.gnu.org/software/emacs/manual/html_node/Rmail.html>`_
+ `Reading Mail with Rmail <http://www.gnu.org/software/emacs/manual/html_node/emacs/Rmail.html>`_
The Rmail manual, with some information on Babyl semantics.
@@ -1540,10 +1540,6 @@
:class:`UnixMailbox` except that individual messages are separated by only
``From`` lines.
- For more information, see `Configuring Netscape Mail on Unix: Why the
- Content-Length Format is Bad
- <http://home.netscape.com/eng/mozilla/2.0/relnotes/demo/content-length.html>`_.
-
.. class:: PortableUnixMailbox(fp[, factory])
@@ -1629,7 +1625,7 @@
destination = mailbox.MH('~/Mail')
destination.lock()
for message in mailbox.Babyl('~/RMAIL'):
- destination.add(MHMessage(message))
+ destination.add(mailbox.MHMessage(message))
destination.flush()
destination.unlock()
diff --git a/Doc/library/mimetools.rst b/Doc/library/mimetools.rst
index 8da385e..7813867 100644
--- a/Doc/library/mimetools.rst
+++ b/Doc/library/mimetools.rst
@@ -73,7 +73,7 @@
Module :mod:`multifile`
Support for reading files which contain distinct parts, such as MIME data.
- http://www.cs.uu.nl/wais/html/na-dir/mail/mime-faq/.html
+ http://faqs.cs.uu.nl/na-dir/mail/mime-faq/.html
The MIME Frequently Asked Questions document. For an overview of MIME, see the
answer to question 1.1 in Part 1 of this document.
diff --git a/Doc/library/mimetypes.rst b/Doc/library/mimetypes.rst
index f59cd82..cc11dfc 100644
--- a/Doc/library/mimetypes.rst
+++ b/Doc/library/mimetypes.rst
@@ -41,7 +41,7 @@
Optional *strict* is a flag specifying whether the list of known MIME types
is limited to only the official types `registered with IANA
- <http://www.isi.edu/in-notes/iana/assignments/media-types>`_ are recognized.
+ <http://www.iana.org/assignments/media-types/>`_ are recognized.
When *strict* is true (the default), only the IANA types are supported; when
*strict* is false, some additional non-standard but commonly used MIME types
are also recognized.
diff --git a/Doc/library/operator.rst b/Doc/library/operator.rst
index ca056ab..590098b 100644
--- a/Doc/library/operator.rst
+++ b/Doc/library/operator.rst
@@ -428,21 +428,43 @@
.. function:: itemgetter(item[, args...])
- Return a callable object that fetches *item* from its operand. If more than one
- item is requested, returns a tuple of items. After, ``f=itemgetter(2)``, the
- call ``f(b)`` returns ``b[2]``. After, ``f=itemgetter(2,5,3)``, the call
- ``f(b)`` returns ``(b[2], b[5], b[3])``.
+ Return a callable object that fetches *item* from its operand using the
+ operand's :meth:`__getitem__` method. If multiple items are specified,
+ returns a tuple of lookup values. Equivalent to::
+ def itemgetter(*items):
+ if len(items) == 1:
+ item = items[0]
+ def g(obj):
+ return obj[item]
+ else:
+ def g(obj):
+ return tuple(obj[item] for item in items)
+ return g
+
+ The items can be any type accepted by the operand's :meth:`__getitem__`
+ method. Dictionaries accept any hashable value. Lists, tuples, and
+ strings accept an index or a slice::
-Examples::
+ >>> itemgetter(1)('ABCDEFG')
+ 'B'
+ >>> itemgetter(1,3,5)('ABCDEFG')
+ ('B', 'D', 'F')
+ >>> itemgetter(slice(2,None))('ABCDEFG')
+ 'CDEFG'
- >>> from operator import itemgetter
- >>> inventory = [('apple', 3), ('banana', 2), ('pear', 5), ('orange', 1)]
- >>> getcount = itemgetter(1)
- >>> map(getcount, inventory)
- [3, 2, 5, 1]
- >>> sorted(inventory, key=getcount)
- [('orange', 1), ('banana', 2), ('apple', 3), ('pear', 5)]
+ .. versionadded:: 2.4
+
+ Example of using :func:`itemgetter` to retrieve specific fields from a
+ tuple record::
+
+ >>> from operator import itemgetter
+ >>> inventory = [('apple', 3), ('banana', 2), ('pear', 5), ('orange', 1)]
+ >>> getcount = itemgetter(1)
+ >>> map(getcount, inventory)
+ [3, 2, 5, 1]
+ >>> sorted(inventory, key=getcount)
+ [('orange', 1), ('banana', 2), ('apple', 3), ('pear', 5)]
.. function:: methodcaller(name[, args...])
diff --git a/Doc/library/os.rst b/Doc/library/os.rst
index ef81304..ec35c3b 100644
--- a/Doc/library/os.rst
+++ b/Doc/library/os.rst
@@ -1387,7 +1387,8 @@
.. function:: fork()
Fork a child process. Return ``0`` in the child and the child's process id in the
- parent. Availability: Macintosh, Unix.
+ parent. If an error occurs :exc:`OSError` is raised.
+ Availability: Macintosh, Unix.
.. function:: forkpty()
@@ -1396,7 +1397,8 @@
terminal. Return a pair of ``(pid, fd)``, where *pid* is ``0`` in the child, the
new child's process id in the parent, and *fd* is the file descriptor of the
master end of the pseudo-terminal. For a more portable approach, use the
- :mod:`pty` module. Availability: Macintosh, some flavors of Unix.
+ :mod:`pty` module. If an error occurs :exc:`OSError` is raised.
+ Availability: Macintosh, some flavors of Unix.
.. function:: kill(pid, sig)
diff --git a/Doc/library/othergui.rst b/Doc/library/othergui.rst
index b36568d..ab4efdb 100644
--- a/Doc/library/othergui.rst
+++ b/Doc/library/othergui.rst
@@ -36,14 +36,12 @@
`PyGTK <http://www.pygtk.org/>`_
is a set of bindings for the `GTK <http://www.gtk.org/>`_ widget set. It
- provides an object oriented interface that is slightly higher level than the C
- one. It comes with many more widgets than Tkinter provides, and
- has good Python-specific reference documentation. There are also `bindings
- <http://www.daa.com.au/~james/gnome/>`_ to `GNOME <http://www.gnome.org>`_.
- One well known PyGTK application is
- `PythonCAD <http://www.pythoncad.org/>`_. An
- online `tutorial <http://www.pygtk.org/pygtk2tutorial/index.html>`_ is
- available.
+ provides an object oriented interface that is slightly higher level than
+ the C one. It comes with many more widgets than Tkinter provides, and has
+ good Python-specific reference documentation. There are also bindings to
+ `GNOME <http://www.gnome.org>`_. One well known PyGTK application is
+ `PythonCAD <http://www.pythoncad.org/>`_. An online `tutorial
+ <http://www.pygtk.org/pygtk2tutorial/index.html>`_ is available.
`PyQt <http://www.riverbankcomputing.co.uk/pyqt/index.php>`_
PyQt is a :program:`sip`\ -wrapped binding to the Qt toolkit. Qt is an
diff --git a/Doc/library/pdb.rst b/Doc/library/pdb.rst
index 017fbd6..df8cf6c 100644
--- a/Doc/library/pdb.rst
+++ b/Doc/library/pdb.rst
@@ -103,9 +103,12 @@
being debugged (e.g. when an assertion fails).
-.. function:: post_mortem(traceback)
+.. function:: post_mortem([traceback])
- Enter post-mortem debugging of the given *traceback* object.
+ Enter post-mortem debugging of the given *traceback* object. If no
+ *traceback* is given, it uses the one of the exception that is currently
+ being handled (an exception must be being handled if the default is to be
+ used).
.. function:: pm()
diff --git a/Doc/library/py_compile.rst b/Doc/library/py_compile.rst
index de9a80e..77ed8cf 100644
--- a/Doc/library/py_compile.rst
+++ b/Doc/library/py_compile.rst
@@ -42,7 +42,12 @@
structure to locate source files; it only compiles files named explicitly.
When this module is run as a script, the :func:`main` is used to compile all the
-files named on the command line.
+files named on the command line. The exit status is nonzero if one of the files
+could not be compiled.
+
+.. versionchanged:: 2.6
+
+ Added the nonzero exit status.
.. seealso::
diff --git a/Doc/library/re.rst b/Doc/library/re.rst
index c3ec777..d7eb6f6 100644
--- a/Doc/library/re.rst
+++ b/Doc/library/re.rst
@@ -539,14 +539,26 @@
>>> re.split('\W+', 'Words, words, words.', 1)
['Words', 'words, words.']
+ If there are capturing groups in the separator and it matches at the start of
+ the string, the result will start with an empty string. The same holds for
+ the end of the string::
+
+ >>> re.split('(\W+)', '...words, words...')
+ ['', '...', 'words', ', ', 'words', '...', '']
+
+ That way, separator components are always found at the same relative
+ indices within the result list (e.g., if there's one capturing group
+ in the separator, the 0th, the 2nd and so forth).
+
Note that *split* will never split a string on an empty pattern match.
- For example ::
+ For example::
>>> re.split('x*', 'foo')
['foo']
>>> re.split("(?m)^$", "foo\n\nbar\n")
['foo\n\nbar\n']
+
.. function:: findall(pattern, string[, flags])
Return all non-overlapping matches of *pattern* in *string*, as a list of
diff --git a/Doc/library/robotparser.rst b/Doc/library/robotparser.rst
index 2451799..6cc7df8 100644
--- a/Doc/library/robotparser.rst
+++ b/Doc/library/robotparser.rst
@@ -15,9 +15,8 @@
This module provides a single class, :class:`RobotFileParser`, which answers
questions about whether or not a particular user agent can fetch a URL on the
-Web site that published the :file:`robots.txt` file. For more details on the
-structure of :file:`robots.txt` files, see
-http://www.robotstxt.org/wc/norobots.html.
+Web site that published the :file:`robots.txt` file. For more details on the
+structure of :file:`robots.txt` files, see http://www.robotstxt.org/orig.html.
.. class:: RobotFileParser()
diff --git a/Doc/library/socketserver.rst b/Doc/library/socketserver.rst
index 2c85c86..a8eb953 100644
--- a/Doc/library/socketserver.rst
+++ b/Doc/library/socketserver.rst
@@ -113,7 +113,8 @@
finished requests and to use :func:`select` to decide which request to work on
next (or whether to handle a new incoming request). This is particularly
important for stream services where each client can potentially be connected for
-a long time (if threads or subprocesses cannot be used).
+a long time (if threads or subprocesses cannot be used). See :mod:`asyncore` for
+another way to manage this.
.. XXX should data and methods be intermingled, or separate?
how should the distinction between class and instance variables be drawn?
@@ -132,16 +133,24 @@
.. function:: handle_request()
- Process a single request. This function calls the following methods in order:
- :meth:`get_request`, :meth:`verify_request`, and :meth:`process_request`. If
- the user-provided :meth:`handle` method of the handler class raises an
- exception, the server's :meth:`handle_error` method will be called.
+ Process a single request. This function calls the following methods in
+ order: :meth:`get_request`, :meth:`verify_request`, and
+ :meth:`process_request`. If the user-provided :meth:`handle` method of the
+ handler class raises an exception, the server's :meth:`handle_error` method
+ will be called. If no request is received within :attr:`self.timeout`
+ seconds, :meth:`handle_timeout` will be called and :meth:`handle_request`
+ will return.
-.. function:: serve_forever()
+.. function:: serve_forever(poll_interval=0.5)
- Handle an infinite number of requests. This simply calls :meth:`handle_request`
- inside an infinite loop.
+ Handle requests until an explicit :meth:`shutdown` request. Polls for
+ shutdown every *poll_interval* seconds.
+
+
+.. function:: shutdown()
+
+ Tells the :meth:`serve_forever` loop to stop and waits until it does.
.. data:: address_family
@@ -195,10 +204,9 @@
.. data:: timeout
- Timeout duration, measured in seconds, or :const:`None` if no timeout is desired.
- If no incoming requests are received within the timeout period,
- the :meth:`handle_timeout` method is called and then the server resumes waiting for
- requests.
+ Timeout duration, measured in seconds, or :const:`None` if no timeout is
+ desired. If :meth:`handle_request` receives no incoming requests within the
+ timeout period, the :meth:`handle_timeout` method is called.
There are various server methods that can be overridden by subclasses of base
server classes like :class:`TCPServer`; these methods aren't useful to external
diff --git a/Doc/library/struct.rst b/Doc/library/struct.rst
index ee568e6..924cb60 100644
--- a/Doc/library/struct.rst
+++ b/Doc/library/struct.rst
@@ -73,7 +73,7 @@
+--------+-------------------------+--------------------+-------+
| ``B`` | :ctype:`unsigned char` | integer | |
+--------+-------------------------+--------------------+-------+
-| ``t`` | :ctype:`_Bool` | bool | \(1) |
+| ``?`` | :ctype:`_Bool` | bool | \(1) |
+--------+-------------------------+--------------------+-------+
| ``h`` | :ctype:`short` | integer | |
+--------+-------------------------+--------------------+-------+
@@ -106,7 +106,7 @@
Notes:
(1)
- The ``'t'`` conversion code corresponds to the :ctype:`_Bool` type defined by
+ The ``'?'`` conversion code corresponds to the :ctype:`_Bool` type defined by
C99. If this type is not available, it is simulated using a :ctype:`char`. In
standard mode, it is always represented by one byte.
@@ -141,7 +141,7 @@
-For the ``'t'`` format character, the return value is either :const:`True` or
+For the ``'?'`` format character, the return value is either :const:`True` or
:const:`False`. When packing, the truth value of the argument object is used.
Either 0 or 1 in the native or standard bool representation will be packed, and
any non-zero value will be True when unpacking.
diff --git a/Doc/library/threading.rst b/Doc/library/threading.rst
index 6f3e95b..3f62e69 100644
--- a/Doc/library/threading.rst
+++ b/Doc/library/threading.rst
@@ -724,3 +724,26 @@
with some_rlock:
print("some_rlock is locked while this executes")
+
+.. _threaded-imports:
+
+Importing in threaded code
+--------------------------
+
+While the import machinery is thread safe, there are two key
+restrictions on threaded imports due to inherent limitations in the way
+that thread safety is provided:
+
+* Firstly, other than in the main module, an import should not have the
+ side effect of spawning a new thread and then waiting for that thread in
+ any way. Failing to abide by this restriction can lead to a deadlock if
+ the spawned thread directly or indirectly attempts to import a module.
+* Secondly, all import attempts must be completed before the interpreter
+ starts shutting itself down. This can be most easily achieved by only
+ performing imports from non-daemon threads created through the threading
+ module. Daemon threads and threads created directly with the thread
+ module will require some other form of synchronization to ensure they do
+ not attempt imports after system shutdown has commenced. Failure to
+ abide by this restriction will lead to intermittent exceptions and
+ crashes during interpreter shutdown (as the late imports attempt to
+ access machinery which is no longer in a valid state).
diff --git a/Doc/library/tix.rst b/Doc/library/tix.rst
index f4bb20f..ad14cc4 100644
--- a/Doc/library/tix.rst
+++ b/Doc/library/tix.rst
@@ -35,7 +35,7 @@
`Tix Programming Guide <http://tix.sourceforge.net/dist/current/docs/tix-book/tix.book.html>`_
On-line version of the programmer's reference material.
- `Tix Development Applications <http://tix.sourceforge.net/Tide/>`_
+ `Tix Development Applications <http://tix.sourceforge.net/Tixapps/src/Tide.html>`_
Tix applications for development of Tix and Tkinter programs. Tide applications
work under Tk or Tkinter, and include :program:`TixInspect`, an inspector to
remotely modify and debug Tix/Tk/Tkinter applications.
diff --git a/Doc/library/tkinter.rst b/Doc/library/tkinter.rst
index 4d5cce8..e03d959 100644
--- a/Doc/library/tkinter.rst
+++ b/Doc/library/tkinter.rst
@@ -21,7 +21,7 @@
`An Introduction to Tkinter <http://www.pythonware.com/library/an-introduction-to-tkinter.htm>`_
Fredrik Lundh's on-line reference material.
- `Tkinter reference: a GUI for Python <http://www.nmt.edu/tcc/help/pubs/lang.html>`_
+ `Tkinter reference: a GUI for Python <http://infohost.nmt.edu/tcc/help/pubs/lang.html>`_
On-line reference material.
`Tkinter for JPython <http://jtkinter.sourceforge.net>`_
diff --git a/Doc/library/unittest.rst b/Doc/library/unittest.rst
index 7703ad9..8188e70 100644
--- a/Doc/library/unittest.rst
+++ b/Doc/library/unittest.rst
@@ -562,6 +562,7 @@
.. method:: TestCase.assert_(expr[, msg])
TestCase.failUnless(expr[, msg])
+ TestCase.assertTrue(expr[, msg])
Signal a test failure if *expr* is false; the explanation for the error will be
*msg* if given, otherwise it will be :const:`None`.
@@ -618,6 +619,7 @@
.. method:: TestCase.failIf(expr[, msg])
+ TestCase.assertFalse(expr[, msg])
The inverse of the :meth:`failUnless` method is the :meth:`failIf` method. This
signals a test failure if *expr* is true, with *msg* or :const:`None` for the
diff --git a/Doc/library/urllib.rst b/Doc/library/urllib.rst
index 63fb53e..e976cb1 100644
--- a/Doc/library/urllib.rst
+++ b/Doc/library/urllib.rst
@@ -107,10 +107,6 @@
filehandle = urllib.urlopen(some_url, proxies=None)
filehandle = urllib.urlopen(some_url)
- The :func:`urlopen` function does not support explicit proxy specification. If
- you need to override environmental proxy settings, use :class:`URLopener`, or a
- subclass such as :class:`FancyURLopener`.
-
Proxies which require authentication for use are not currently supported; this
is considered an implementation limitation.
diff --git a/Doc/library/xml.dom.rst b/Doc/library/xml.dom.rst
index 768c9c8..2a0c788 100644
--- a/Doc/library/xml.dom.rst
+++ b/Doc/library/xml.dom.rst
@@ -506,7 +506,7 @@
^^^^^^^^^^^^^^^^
A :class:`Document` represents an entire XML document, including its constituent
-elements, attributes, processing instructions, comments etc. Remeber that it
+elements, attributes, processing instructions, comments etc. Remember that it
inherits properties from :class:`Node`.
diff --git a/Doc/library/zipfile.rst b/Doc/library/zipfile.rst
index c90f946..b1c9038 100644
--- a/Doc/library/zipfile.rst
+++ b/Doc/library/zipfile.rst
@@ -11,7 +11,7 @@
provides tools to create, read, write, append, and list a ZIP file. Any
advanced use of this module will require an understanding of the format, as
defined in `PKZIP Application Note
-<http://www.pkware.com/business_and_developers/developer/appnote/>`_.
+<http://www.pkware.com/documents/casestudies/APPNOTE.TXT>`_.
This module does not currently handle multi-disk ZIP files, or ZIP files
which have appended comments (although it correctly handles comments
@@ -81,7 +81,7 @@
.. seealso::
- `PKZIP Application Note <http://www.pkware.com/business_and_developers/developer/appnote/>`_
+ `PKZIP Application Note <http://www.pkware.com/documents/casestudies/APPNOTE.TXT>`_
Documentation on the ZIP file format by Phil Katz, the creator of the format and
algorithms used.
@@ -361,7 +361,7 @@
.. attribute:: ZipInfo.extra
Expansion field data. The `PKZIP Application Note
- <http://www.pkware.com/business_and_developers/developer/appnote/>`_ contains
+ <http://www.pkware.com/documents/casestudies/APPNOTE.TXT>`_ contains
some comments on the internal structure of the data contained in this string.
diff --git a/Doc/library/zipimport.rst b/Doc/library/zipimport.rst
index ed9c631..f8d0b1d 100644
--- a/Doc/library/zipimport.rst
+++ b/Doc/library/zipimport.rst
@@ -29,7 +29,7 @@
.. seealso::
- `PKZIP Application Note <http://www.pkware.com/business_and_developers/developer/appnote/>`_
+ `PKZIP Application Note <http://www.pkware.com/documents/casestudies/APPNOTE.TXT>`_
Documentation on the ZIP file format by Phil Katz, the creator of the format and
algorithms used.
diff --git a/Doc/license.rst b/Doc/license.rst
index 6ffa65f..0226ec5 100644
--- a/Doc/license.rst
+++ b/Doc/license.rst
@@ -347,7 +347,7 @@
The :mod:`socket` module uses the functions, :func:`getaddrinfo`, and
:func:`getnameinfo`, which are coded in separate source files from the WIDE
-Project, http://www.wide.ad.jp/about/index.html. ::
+Project, http://www.wide.ad.jp/. ::
Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
All rights reserved.
diff --git a/Doc/reference/compound_stmts.rst b/Doc/reference/compound_stmts.rst
index 74833df..5b590ce 100644
--- a/Doc/reference/compound_stmts.rst
+++ b/Doc/reference/compound_stmts.rst
@@ -52,6 +52,7 @@
: | `with_stmt`
: | `funcdef`
: | `classdef`
+ : | `decorated`
suite: `stmt_list` NEWLINE | NEWLINE INDENT `statement`+ DEDENT
statement: `stmt_list` NEWLINE | `compound_stmt`
stmt_list: `simple_stmt` (";" `simple_stmt`)* [";"]
@@ -424,6 +425,7 @@
funcdef: [`decorators`] "def" `funcname` "(" [`parameter_list`] ")" ["->" `expression`]? ":" `suite`
decorators: `decorator`+
decorator: "@" `dotted_name` ["(" [`argument_list` [","]] ")"] NEWLINE
+ funcdef: "def" `funcname` "(" [`parameter_list`] ")" ":" `suite`
dotted_name: `identifier` ("." `identifier`)*
parameter_list: (`defparameter` ",")*
: ( "*" [`parameter`] ("," `defparameter`)*
@@ -585,6 +587,10 @@
:pep:`3129` - Class Decorators
+Class definitions, like function definitions, may be wrapped by one or
+more :term:`decorator` expressions. The evaluation rules for the
+decorator expressions are the same as for functions. The result must
+be a class object, which is then bound to the class name.
.. rubric:: Footnotes
diff --git a/Doc/reference/simple_stmts.rst b/Doc/reference/simple_stmts.rst
index 1dc49f3..e149710 100644
--- a/Doc/reference/simple_stmts.rst
+++ b/Doc/reference/simple_stmts.rst
@@ -539,9 +539,13 @@
:keyword:`continue` may only occur syntactically nested in a :keyword:`for` or
:keyword:`while` loop, but not nested in a function or class definition or
-:keyword:`finally` statement within that loop. [#]_ It continues with the next
+:keyword:`finally` clause within that loop. It continues with the next
cycle of the nearest enclosing loop.
+When :keyword:`continue` passes control out of a :keyword:`try` statement with a
+:keyword:`finally` clause, that :keyword:`finally` clause is executed before
+really starting the next loop cycle.
+
.. _import:
.. _from:
@@ -832,4 +836,3 @@
.. [#] It may occur within an :keyword:`except` or :keyword:`else` clause. The
restriction on occurring in the :keyword:`try` clause is implementor's
laziness and will eventually be lifted.
-
diff --git a/Doc/tutorial/classes.rst b/Doc/tutorial/classes.rst
index d9e2f46..b9db87b 100644
--- a/Doc/tutorial/classes.rst
+++ b/Doc/tutorial/classes.rst
@@ -124,6 +124,8 @@
a variable will simply create a *new* local variable in the innermost scope,
leaving the identically named outer variable unchanged).
+.. XXX mention nonlocal
+
Usually, the local scope references the local names of the (textually) current
function. Outside functions, the local scope references the same namespace as
the global scope: the module's namespace. Class definitions place yet another
@@ -137,12 +139,15 @@
time, so don't rely on dynamic name resolution! (In fact, local variables are
already determined statically.)
-A special quirk of Python is that assignments normally go into the innermost
-scope. Assignments do not copy data --- they just bind names to objects. The
-same is true for deletions: the statement ``del x`` removes the binding of ``x``
-from the namespace referenced by the local scope. In fact, all operations that
-introduce new names use the local scope: in particular, import statements and
-function definitions bind the module or function name in the local scope.
+A special quirk of Python is that -- if no :keyword:`global` or
+:keyword:`nonlocal` statement is in effect -- assignments to names always go
+into the innermost scope. Assignments do not copy data --- they just bind names
+to objects. The same is true for deletions: the statement ``del x`` removes the
+binding of ``x`` from the namespace referenced by the local scope. In fact, all
+operations that introduce new names use the local scope: in particular, import
+statements and function definitions bind the module or function name in the
+local scope. (The :keyword:`global` statement can be used to indicate that
+particular variables live in the global scope.)
The :keyword:`global` statement can be used to indicate that particular
variables live in the global scope and should be rebound there; the
@@ -466,6 +471,9 @@
defined in this global scope, and in the next section we'll find some good
reasons why a method would want to reference its own class!
+Each value is an object, and therefore has a *class* (also called its *type*).
+It is stored as ``object.__class__``.
+
.. _tut-inheritance:
@@ -515,6 +523,19 @@
only works if the base class is defined or imported directly in the global
scope.)
+Python has two builtin functions that work with inheritance:
+
+* Use :func:`isinstance` to check an object's type: ``isinstance(obj, int)``
+ will be ``True`` only if ``obj.__class__`` is :class:`int` or some class
+ derived from :class:`int`.
+
+* Use :func:`issubclass` to check class inheritance: ``issubclass(bool, int)``
+ is ``True`` since :class:`bool` is a subclass of :class:`int`. However,
+ ``issubclass(unicode, str)`` is ``False`` since :class:`unicode` is not a
+ subclass of :class:`str` (they only share a common ancestor,
+ :class:`basestring`).
+
+
.. _tut-multiple:
diff --git a/Doc/tutorial/whatnow.rst b/Doc/tutorial/whatnow.rst
index 25d42a8..b950cbc 100644
--- a/Doc/tutorial/whatnow.rst
+++ b/Doc/tutorial/whatnow.rst
@@ -38,9 +38,9 @@
* http://docs.python.org: Fast access to Python's documentation.
-* http://cheeseshop.python.org: The Python Package Index, nicknamed the Cheese
- Shop, is an index of user-created Python modules that are available for
- download. Once you begin releasing code, you can register it here so that
+* http://pypi.python.org: The Python Package Index, previously also nicknamed
+ the Cheese Shop, is an index of user-created Python modules that are available
+ for download. Once you begin releasing code, you can register it here so that
others can find it.
* http://aspn.activestate.com/ASPN/Python/Cookbook/: The Python Cookbook is a
diff --git a/Doc/using/cmdline.rst b/Doc/using/cmdline.rst
index 3dcfc7e..a94c3e7 100644
--- a/Doc/using/cmdline.rst
+++ b/Doc/using/cmdline.rst
@@ -311,7 +311,8 @@
Augment the default search path for module files. The format is the same as
the shell's :envvar:`PATH`: one or more directory pathnames separated by
- colons. Non-existent directories are silently ignored.
+ :data:`os.pathsep` (e.g. colons on Unix or semicolons on Windows).
+ Non-existent directories are silently ignored.
The default search path is installation dependent, but generally begins with
:file:`{prefix}/lib/python{version}`` (see :envvar:`PYTHONHOME` above). It
diff --git a/Doc/whatsnew/2.6.rst b/Doc/whatsnew/2.6.rst
index bba46c9..20f17c7 100644
--- a/Doc/whatsnew/2.6.rst
+++ b/Doc/whatsnew/2.6.rst
@@ -117,8 +117,12 @@
New Issue Tracker: Roundup
--------------------------------------------------
-XXX write this.
+XXX write this -- this section is currently just brief notes.
+The developers were growing increasingly annoyed by SourceForge's
+bug tracker. (Discuss problems in a sentence or two.)
+
+Hosting provided by XXX.
New Documentation Format: ReStructured Text
--------------------------------------------------
@@ -455,7 +459,46 @@
PEP 3101: Advanced String Formatting
=====================================================
-XXX write this
+XXX write this -- this section is currently just brief notes.
+
+8-bit and Unicode strings have a .format() method that takes the arguments
+to be formatted.
+
+.format() uses curly brackets ({, }) as special characters:
+
+ format("User ID: {0}", "root") -> "User ID: root"
+ format("Empty dict: {{}}") -> "Empty dict: {}"
+ 0.name
+ 0[name]
+
+Format specifiers:
+
+ 0:8 -> left-align, pad
+ 0:>8 -> right-align, pad
+
+Format data types::
+
+ ... take table from PEP 3101
+
+Classes and types can define a __format__ method to control how it's
+formatted. It receives a single argument, the format specifier::
+
+ def __format__(self, format_spec):
+ if isinstance(format_spec, unicode):
+ return unicode(str(self))
+ else:
+ return str(self)
+
+There's also a format() built-in that will format a single value. It calls
+the type's :meth:`__format__` method with the provided specifier::
+
+ >>> format(75.6564, '.2f')
+ '75.66'
+
+.. seealso::
+
+ :pep:`3101` - Advanced String Formatting
+ PEP written by Talin.
.. ======================================================================
@@ -509,12 +552,30 @@
.. ======================================================================
+.. _pep-3112:
+
+PEP 3112: Byte Literals
+=====================================================
+
+Python 3.0 adopts Unicode as the language's fundamental string type, and
+denotes 8-bit literals differently, either as ``b'string'``
+or using a :class:`bytes` constructor. For future compatibility,
+Python 2.6 adds :class:`bytes` as a synonym for the :class:`str` type,
+and it also supports the ``b''`` notation.
+
+.. seealso::
+
+ :pep:`3112` - Bytes literals in Python 3000
+ PEP written by Jason Orendorff; backported to 2.6 by Christian Heimes.
+
+.. ======================================================================
+
.. _pep-3119:
PEP 3119: Abstract Base Classes
=====================================================
-XXX
+XXX write this -- this section is currently just brief notes.
How to identify a file object?
@@ -558,16 +619,23 @@
PEP 3127: Integer Literal Support and Syntax
=====================================================
-XXX write this
+XXX write this -- this section is currently just brief notes.
Python 3.0 changes the syntax for octal integer literals, and
adds supports for binary integers: 0o instad of 0,
and 0b for binary. Python 2.6 doesn't support this, but a bin()
-builtin was added, and
+builtin was added.
+
+XXX changes to the hex/oct builtins
New bin() built-in returns the binary form of a number.
+.. seealso::
+
+ :pep:`3127` - Integer Literal Support and Syntax
+ PEP written by Patrick Maupin.
+
.. ======================================================================
.. _pep-3129:
@@ -575,7 +643,30 @@
PEP 3129: Class Decorators
=====================================================
-XXX write this.
+XXX write this -- this section is currently just brief notes.
+
+Class decorators are analogous to function decorators. After defining a class,
+it's passed through the specified series of decorator functions
+and the ultimate return value is recorded as the class.
+
+::
+
+ class A:
+ pass
+ A = foo(bar(A))
+
+
+ @foo
+ @bar
+ class A:
+ pass
+
+XXX need to find a good motivating example.
+
+.. seealso::
+
+ :pep:`3129` - Class Decorators
+ PEP written by Collin Winter.
.. ======================================================================
@@ -631,11 +722,14 @@
.. seealso::
+ :pep:`3141` - A Type Hierarchy for Numbers
+ PEP written by Jeffrey Yasskin.
+
XXX link: Discusses Scheme's numeric tower.
-The Fraction Module
+The :mod:`fractions` Module
--------------------------------------------------
To fill out the hierarchy of numeric types, a rational-number class
@@ -657,11 +751,27 @@
>>> a/b
Fraction(5, 3)
+To help in converting floating-point numbers to rationals,
+the float type now has a :meth:`as_integer_ratio()` method that returns
+the numerator and denominator for a fraction that evaluates to the same
+floating-point value::
+
+ >>> (2.5) .as_integer_ratio()
+ (5, 2)
+ >>> (3.1415) .as_integer_ratio()
+ (7074029114692207L, 2251799813685248L)
+ >>> (1./3) .as_integer_ratio()
+ (6004799503160661L, 18014398509481984L)
+
+Note that values that can only be approximated by floating-point
+numbers, such as 1./3, are not simplified to the number being
+approximated; the fraction attempts to match the floating-point value
+**exactly**.
+
The :mod:`fractions` module is based upon an implementation by Sjoerd
Mullender that was in Python's :file:`Demo/classes/` directory for a
long time. This implementation was significantly updated by Jeffrey
-Yaskin.
-
+Yasskin.
Other Language Changes
======================
@@ -740,7 +850,7 @@
positive or negative infinity. This works on any platform with
IEEE 754 semantics. (Contributed by Christian Heimes.)
- .. Patch 1635.
+ .. Patch 1635
Other functions in the :mod:`math` module, :func:`isinf` and
:func:`isnan`, return true if their floating-point argument is
@@ -767,6 +877,12 @@
.. Patch #1537
+* Generator objects now have a :attr:`gi_code` attribute that refers to
+ the original code object backing the generator.
+ (Contributed by Collin Winter.)
+
+ .. Patch #1473257
+
* The :func:`compile` built-in function now accepts keyword arguments
as well as positional parameters. (Contributed by Thomas Wouters.)
@@ -816,7 +932,7 @@
(Original optimization implemented by Armin Rigo, updated for
Python 2.6 by Kevin Jacobs.)
- .. % Patch 1700288
+ .. Patch 1700288
* All of the functions in the :mod:`struct` module have been rewritten in
C, thanks to work at the Need For Speed sprint.
@@ -1041,7 +1157,7 @@
(2, 3, 1, 3), (2, 3, 1, 4), (2, 3, 2, 3), (2, 3, 2, 4),
(2, 4, 1, 3), (2, 4, 1, 4), (2, 4, 2, 3), (2, 4, 2, 4)]
- ``combinations(iter, r)`` returns combinations of length *r* from
+ ``combinations(iter, r)`` returns sub-sequences of length *r* from
the elements of *iterable*. ::
itertools.combinations('123', 2) ->
@@ -1054,8 +1170,18 @@
[('1', '2', '3'), ('1', '2', '4'), ('1', '3', '4'),
('2', '3', '4')]
+ ``permutations(iter[, r])`` returns all the permutations of length *r* of
+ the iterable's elements. If *r* is not specified, it will default to the
+ number of elements produced by the iterable.
+
+ itertools.permutations([1,2,3,4], 2) ->
+ [(1, 2), (1, 3), (1, 4),
+ (2, 1), (2, 3), (2, 4),
+ (3, 1), (3, 2), (3, 4),
+ (4, 1), (4, 2), (4, 3)]
+
``itertools.chain(*iterables)` is an existing function in
- :mod:`itertools` that gained a new constructor.
+ :mod:`itertools` that gained a new constructor in Python 2.6.
``itertools.chain.from_iterable(iterable)`` takes a single
iterable that should return other iterables. :func:`chain` will
then return all the elements of the first iterable, then
@@ -1066,6 +1192,13 @@
(All contributed by Raymond Hettinger.)
+* The :mod:`logging` module's :class:`FileHandler` class
+ and its subclasses :class:`WatchedFileHandler`, :class:`RotatingFileHandler`,
+ and :class:`TimedRotatingFileHandler` now
+ have an optional *delay* parameter to its constructor. If *delay*
+ is true, opening of the log file is deferred until the first
+ :meth:`emit` call is made. (Contributed by Vinay Sajip.)
+
* The :mod:`macfs` module has been removed. This in turn required the
:func:`macostools.touched` function to be removed because it depended on the
:mod:`macfs` module.
@@ -1171,6 +1304,13 @@
changed and :const:`UF_APPEND` to indicate that data can only be appended to the
file. (Contributed by M. Levinson.)
+ ``os.closerange(*low*, *high*)`` efficiently closes all file descriptors
+ from *low* to *high*, ignoring any errors and not including *high* itself.
+ This function is now used by the :mod:`subprocess` module to make starting
+ processes faster. (Contributed by Georg Brandl.)
+
+ .. Patch #1663329
+
* The :mod:`pyexpat` module's :class:`Parser` objects now allow setting
their :attr:`buffer_size` attribute to change the size of the buffer
used to hold character data.
@@ -1199,10 +1339,18 @@
long searches can now be interrupted.
(Contributed by Josh Hoyt and Ralf Schmitt.)
- .. % Patch 846388
+ .. Patch 846388
* The :mod:`rgbimg` module has been removed.
+* The :mod:`sched` module's :class:`scheduler` instances now
+ have a read-only :attr:`queue` attribute that returns the
+ contents of the scheduler's queue, represented as a list of
+ named tuples with the fields ``(time, priority, action, argument)``.
+ (Contributed by Raymond Hettinger XXX check.)
+
+ .. Patch 1861
+
* The :mod:`sets` module has been deprecated; it's better to
use the built-in :class:`set` and :class:`frozenset` types.
@@ -1223,9 +1371,9 @@
On receiving a signal, a byte will be written and the main event loop
will be woken up, without the need to poll.
- Contributed by Adam Olsen.
+ (Contributed by Adam Olsen.)
- .. % Patch 1583
+ .. Patch 1583
The :func:`siginterrupt` function is now available from Python code,
and allows changing whether signals can interrupt system calls or not.
@@ -1250,7 +1398,7 @@
* In the :mod:`smtplib` module, SMTP.starttls() now complies with :rfc:`3207`
and forgets any knowledge obtained from the server not obtained from
- the TLS negotiation itself. Patch contributed by Bill Fenner.
+ the TLS negotiation itself. (Patch contributed by Bill Fenner.)
.. Issue 829951
@@ -1267,6 +1415,10 @@
by Michael Pomraning.)
.. Patch #742598
+
+* The :mod:`struct` module now supports the C99 :ctype:`_Bool` type,
+ using the format character ``'?'``.
+ (Contributed by David Remahl.)
* A new variable in the :mod:`sys` module,
:attr:`float_info`, is an object
@@ -1297,6 +1449,12 @@
These attributes are all read-only.
(Contributed by Christian Heimes.)
+ It's now possible to determine the current profiler and tracer functions
+ by calling :func:`sys.getprofile` and :func:`sys.gettrace`.
+ (Contributed by Georg Brandl.)
+
+ .. Patch #1648
+
* The :mod:`tarfile` module now supports POSIX.1-2001 (pax) and
POSIX.1-1988 (ustar) format tarfiles, in addition to the GNU tar
format that was already supported. The default format
@@ -1547,11 +1705,13 @@
.. Issue 1635
-* Some macros were renamed to make it clearer that they are macros,
+* Some macros were renamed in both 3.0 and 2.6 to make it clearer that
+ they are macros,
not functions. :cmacro:`Py_Size()` became :cmacro:`Py_SIZE()`,
:cmacro:`Py_Type()` became :cmacro:`Py_TYPE()`, and
- :cmacro:`Py_Refcnt()` became :cmacro:`Py_REFCNT()`. Macros for backward
- compatibility are still available for Python 2.6.
+ :cmacro:`Py_Refcnt()` became :cmacro:`Py_REFCNT()`.
+ The mixed-case macros are still available
+ in Python 2.6 for backward compatibility.
.. Issue 1629
diff --git a/Lib/SocketServer.py b/Lib/SocketServer.py
index 47d8728..2a9ec8a 100644
--- a/Lib/SocketServer.py
+++ b/Lib/SocketServer.py
@@ -130,8 +130,13 @@
import socket
+import select
import sys
import os
+try:
+ import threading
+except ImportError:
+ import dummy_threading as threading
__all__ = ["TCPServer","UDPServer","ForkingUDPServer","ForkingTCPServer",
"ThreadingUDPServer","ThreadingTCPServer","BaseRequestHandler",
@@ -149,7 +154,8 @@
Methods for the caller:
- __init__(server_address, RequestHandlerClass)
- - serve_forever()
+ - serve_forever(poll_interval=0.5)
+ - shutdown()
- handle_request() # if you do not use serve_forever()
- fileno() -> int # for select()
@@ -190,6 +196,8 @@
"""Constructor. May be extended, do not override."""
self.server_address = server_address
self.RequestHandlerClass = RequestHandlerClass
+ self.__is_shut_down = threading.Event()
+ self.__serving = False
def server_activate(self):
"""Called by constructor to activate the server.
@@ -199,27 +207,73 @@
"""
pass
- def serve_forever(self):
- """Handle one request at a time until doomsday."""
- while 1:
- self.handle_request()
+ def serve_forever(self, poll_interval=0.5):
+ """Handle one request at a time until shutdown.
+
+ Polls for shutdown every poll_interval seconds. Ignores
+ self.timeout. If you need to do periodic tasks, do them in
+ another thread.
+ """
+ self.__serving = True
+ self.__is_shut_down.clear()
+ while self.__serving:
+ # XXX: Consider using another file descriptor or
+ # connecting to the socket to wake this up instead of
+ # polling. Polling reduces our responsiveness to a
+ # shutdown request and wastes cpu at all other times.
+ r, w, e = select.select([self], [], [], poll_interval)
+ if r:
+ self._handle_request_noblock()
+ self.__is_shut_down.set()
+
+ def shutdown(self):
+ """Stops the serve_forever loop.
+
+ Blocks until the loop has finished. This must be called while
+ serve_forever() is running in another thread, or it will
+ deadlock.
+ """
+ self.__serving = False
+ self.__is_shut_down.wait()
# The distinction between handling, getting, processing and
# finishing a request is fairly arbitrary. Remember:
#
# - handle_request() is the top-level call. It calls
- # await_request(), verify_request() and process_request()
- # - get_request(), called by await_request(), is different for
- # stream or datagram sockets
+ # select, get_request(), verify_request() and process_request()
+ # - get_request() is different for stream or datagram sockets
# - process_request() is the place that may fork a new process
# or create a new thread to finish the request
# - finish_request() instantiates the request handler class;
# this constructor will handle the request all by itself
def handle_request(self):
- """Handle one request, possibly blocking."""
+ """Handle one request, possibly blocking.
+
+ Respects self.timeout.
+ """
+ # Support people who used socket.settimeout() to escape
+ # handle_request before self.timeout was available.
+ timeout = self.socket.gettimeout()
+ if timeout is None:
+ timeout = self.timeout
+ elif self.timeout is not None:
+ timeout = min(timeout, self.timeout)
+ fd_sets = select.select([self], [], [], timeout)
+ if not fd_sets[0]:
+ self.handle_timeout()
+ return
+ self._handle_request_noblock()
+
+ def _handle_request_noblock(self):
+ """Handle one request, without blocking.
+
+ I assume that select.select has returned that the socket is
+ readable before this function was called, so there should be
+ no risk of blocking in get_request().
+ """
try:
- request, client_address = self.await_request()
+ request, client_address = self.get_request()
except socket.error:
return
if self.verify_request(request, client_address):
@@ -229,21 +283,6 @@
self.handle_error(request, client_address)
self.close_request(request)
- def await_request(self):
- """Call get_request or handle_timeout, observing self.timeout.
-
- Returns value from get_request() or raises socket.timeout exception if
- timeout was exceeded.
- """
- if self.timeout is not None:
- # If timeout == 0, you're responsible for your own fd magic.
- import select
- fd_sets = select.select([self], [], [], self.timeout)
- if not fd_sets[0]:
- self.handle_timeout()
- raise socket.timeout("Listening timed out")
- return self.get_request()
-
def handle_timeout(self):
"""Called if no new request arrives within self.timeout.
@@ -307,7 +346,8 @@
Methods for the caller:
- __init__(server_address, RequestHandlerClass, bind_and_activate=True)
- - serve_forever()
+ - serve_forever(poll_interval=0.5)
+ - shutdown()
- handle_request() # if you don't use serve_forever()
- fileno() -> int # for select()
@@ -523,7 +563,6 @@
def process_request(self, request, client_address):
"""Start a new thread to process the request."""
- import threading
t = threading.Thread(target = self.process_request_thread,
args = (request, client_address))
if self.daemon_threads:
diff --git a/Lib/_strptime.py b/Lib/_strptime.py
index 28ccac7..b323e8f 100644
--- a/Lib/_strptime.py
+++ b/Lib/_strptime.py
@@ -22,7 +22,7 @@
except:
from dummy_thread import allocate_lock as _thread_allocate_lock
-__all__ = ['strptime']
+__all__ = []
def _getlang():
# Figure out what the current language is set to.
@@ -190,6 +190,7 @@
base.__init__({
# The " \d" part of the regex is to make %c from ANSI C work
'd': r"(?P<d>3[0-1]|[1-2]\d|0[1-9]|[1-9]| [1-9])",
+ 'f': r"(?P<f>[0-9]{1,6})",
'H': r"(?P<H>2[0-3]|[0-1]\d|\d)",
'I': r"(?P<I>1[0-2]|0[1-9]|[1-9])",
'j': r"(?P<j>36[0-6]|3[0-5]\d|[1-2]\d\d|0[1-9]\d|00[1-9]|[1-9]\d|0[1-9]|[1-9])",
@@ -291,7 +292,7 @@
return 1 + days_to_week + day_of_week
-def strptime(data_string, format="%a %b %d %H:%M:%S %Y"):
+def _strptime(data_string, format="%a %b %d %H:%M:%S %Y"):
"""Return a time struct based on the input string and the format string."""
global _TimeRE_cache, _regex_cache
with _cache_lock:
@@ -327,7 +328,7 @@
data_string[found.end():])
year = 1900
month = day = 1
- hour = minute = second = 0
+ hour = minute = second = fraction = 0
tz = -1
# Default to -1 to signify that values not known; not critical to have,
# though
@@ -384,6 +385,11 @@
minute = int(found_dict['M'])
elif group_key == 'S':
second = int(found_dict['S'])
+ elif group_key == 'f':
+ s = found_dict['f']
+ # Pad to always return microseconds.
+ s += "0" * (6 - len(s))
+ fraction = int(s)
elif group_key == 'A':
weekday = locale_time.f_weekday.index(found_dict['A'].lower())
elif group_key == 'a':
@@ -440,6 +446,9 @@
day = datetime_result.day
if weekday == -1:
weekday = datetime_date(year, month, day).weekday()
- return time.struct_time((year, month, day,
- hour, minute, second,
- weekday, julian, tz))
+ return (time.struct_time((year, month, day,
+ hour, minute, second,
+ weekday, julian, tz)), fraction)
+
+def _strptime_time(data_string, format="%a %b %d %H:%M:%S %Y"):
+ return _strptime(data_string, format)[0]
diff --git a/Lib/bsddb/test/test_dbshelve.py b/Lib/bsddb/test/test_dbshelve.py
index 99d0c49..a597154 100644
--- a/Lib/bsddb/test/test_dbshelve.py
+++ b/Lib/bsddb/test/test_dbshelve.py
@@ -50,10 +50,7 @@
def tearDown(self):
self.do_close()
- try:
- os.remove(self.filename)
- except os.error:
- pass
+ test_support.unlink(self.filename)
def mk(self, key):
"""Turn key into an appropriate key type for this db"""
@@ -284,8 +281,8 @@
def tearDown(self):
- test_support.rmtree(self.homeDir)
self.do_close()
+ test_support.rmtree(self.homeDir)
class EnvBTreeShelveTestCase(BasicEnvShelveTestCase):
diff --git a/Lib/bsddb/test/test_thread.py b/Lib/bsddb/test/test_thread.py
index 359c10d..51ed0f5 100644
--- a/Lib/bsddb/test/test_thread.py
+++ b/Lib/bsddb/test/test_thread.py
@@ -68,9 +68,9 @@
self.d.open(self.filename, self.dbtype, self.dbopenflags|db.DB_CREATE)
def tearDown(self):
- test_support.rmtree(self.homeDir)
self.d.close()
self.env.close()
+ test_support.rmtree(self.homeDir)
def setEnvOpts(self):
pass
diff --git a/Lib/ctypes/__init__.py b/Lib/ctypes/__init__.py
index 8dd8e0a..b6e598f 100644
--- a/Lib/ctypes/__init__.py
+++ b/Lib/ctypes/__init__.py
@@ -237,7 +237,7 @@
_check_size(c_void_p)
class c_bool(_SimpleCData):
- _type_ = "t"
+ _type_ = "?"
# This cache maps types to pointers to them.
_pointer_type_cache = {}
diff --git a/Lib/distutils/command/sdist.py b/Lib/distutils/command/sdist.py
index 8289925..b29fc64 100644
--- a/Lib/distutils/command/sdist.py
+++ b/Lib/distutils/command/sdist.py
@@ -325,14 +325,14 @@
* the build tree (typically "build")
* the release tree itself (only an issue if we ran "sdist"
previously with --keep-temp, or it aborted)
- * any RCS, CVS and .svn directories
+ * any RCS, CVS, .svn, .hg, .git, .bzr, _darcs directories
"""
build = self.get_finalized_command('build')
base_dir = self.distribution.get_fullname()
self.filelist.exclude_pattern(None, prefix=build.build_base)
self.filelist.exclude_pattern(None, prefix=base_dir)
- self.filelist.exclude_pattern(r'/(RCS|CVS|\.svn)/.*', is_regex=1)
+ self.filelist.exclude_pattern(r'(^|/)(RCS|CVS|\.svn|\.hg|\.git|\.bzr|_darcs)/.*', is_regex=1)
def write_manifest(self):
"""Write the file list in 'self.filelist' (presumably as filled in
diff --git a/Lib/heapq.py b/Lib/heapq.py
index 47d246e..71a12e7 100644
--- a/Lib/heapq.py
+++ b/Lib/heapq.py
@@ -127,7 +127,7 @@
"""
__all__ = ['heappush', 'heappop', 'heapify', 'heapreplace', 'merge',
- 'nlargest', 'nsmallest']
+ 'nlargest', 'nsmallest', 'heappushpop']
from itertools import islice, repeat, count, tee
from operator import itemgetter, neg
@@ -165,6 +165,13 @@
_siftup(heap, 0)
return returnitem
+def heappushpop(heap, item):
+ """Fast version of a heappush followed by a heappop."""
+ if heap and item > heap[0]:
+ item, heap[0] = heap[0], item
+ _siftup(heap, 0)
+ return item
+
def heapify(x):
"""Transform list into a heap, in-place, in O(len(heap)) time."""
n = len(x)
@@ -186,13 +193,9 @@
if not result:
return result
heapify(result)
- _heapreplace = heapreplace
- sol = result[0] # sol --> smallest of the nlargest
+ _heappushpop = heappushpop
for elem in it:
- if elem <= sol:
- continue
- _heapreplace(result, elem)
- sol = result[0]
+ heappushpop(result, elem)
result.sort(reverse=True)
return result
@@ -304,7 +307,7 @@
# If available, use C implementation
try:
- from _heapq import heappush, heappop, heapify, heapreplace, nlargest, nsmallest
+ from _heapq import heappush, heappop, heapify, heapreplace, nlargest, nsmallest, heappushpop
except ImportError:
pass
diff --git a/Lib/pdb.py b/Lib/pdb.py
index 57a2b45..29746d7 100755
--- a/Lib/pdb.py
+++ b/Lib/pdb.py
@@ -1193,7 +1193,16 @@
# Post-Mortem interface
-def post_mortem(t):
+def post_mortem(t=None):
+ # handling the default
+ if t is None:
+ # sys.exc_info() returns (type, value, traceback) if an exception is
+ # being handled, otherwise it returns None
+ t = sys.exc_info()[2]
+ if t is None:
+ raise ValueError("A valid traceback must be passed if no "
+ "exception is being handled")
+
p = Pdb()
p.reset()
while t.tb_next is not None:
diff --git a/Lib/platform.py b/Lib/platform.py
index 1fc1032..c2f34b5 100755
--- a/Lib/platform.py
+++ b/Lib/platform.py
@@ -238,9 +238,10 @@
# and http://data.linux-ntfs.org/rpm/whichrpm
# and http://www.die.net/doc/linux/man/man1/lsb_release.1.html
-_supported_dists = ('SuSE', 'debian', 'fedora', 'redhat', 'centos',
- 'mandrake', 'rocks', 'slackware', 'yellowdog',
- 'gentoo', 'UnitedLinux', 'turbolinux')
+_supported_dists = (
+ 'SuSE', 'debian', 'fedora', 'redhat', 'centos',
+ 'mandrake', 'mandriva', 'rocks', 'slackware', 'yellowdog', 'gentoo',
+ 'UnitedLinux', 'turbolinux')
def _parse_release_file(firstline):
diff --git a/Lib/py_compile.py b/Lib/py_compile.py
index 982d19d..8ef3662 100644
--- a/Lib/py_compile.py
+++ b/Lib/py_compile.py
@@ -171,11 +171,15 @@
"""
if args is None:
args = sys.argv[1:]
+ rv = 0
for filename in args:
try:
compile(filename, doraise=True)
except PyCompileError as err:
+ # return value to indicate at least one failure
+ rv = 1
sys.stderr.write(err.msg)
+ return rv
if __name__ == "__main__":
- main()
+ sys.exit(main())
diff --git a/Lib/rlcompleter.py b/Lib/rlcompleter.py
index 74b2e47..c605c7d 100644
--- a/Lib/rlcompleter.py
+++ b/Lib/rlcompleter.py
@@ -119,7 +119,7 @@
import re
m = re.match(r"(\w+(\.\w+)*)\.(\w*)", text)
if not m:
- return
+ return []
expr, attr = m.group(1, 3)
object = eval(expr, self.namespace)
words = dir(object)
diff --git a/Lib/sqlite3/test/transactions.py b/Lib/sqlite3/test/transactions.py
index 1f0b19a..9edc4ac 100644
--- a/Lib/sqlite3/test/transactions.py
+++ b/Lib/sqlite3/test/transactions.py
@@ -31,7 +31,7 @@
def setUp(self):
try:
os.remove(get_db_path())
- except:
+ except OSError:
pass
self.con1 = sqlite.connect(get_db_path(), timeout=0.1)
@@ -47,7 +47,10 @@
self.cur2.close()
self.con2.close()
- os.unlink(get_db_path())
+ try:
+ os.unlink(get_db_path())
+ except OSError:
+ pass
def CheckDMLdoesAutoCommitBefore(self):
self.cur1.execute("create table test(i)")
diff --git a/Lib/test/output/test_thread b/Lib/test/output/test_thread
deleted file mode 100644
index 68c6a92..0000000
--- a/Lib/test/output/test_thread
+++ /dev/null
@@ -1,18 +0,0 @@
-test_thread
-waiting for all tasks to complete
-all tasks done
-
-*** Barrier Test ***
-all tasks done
-
-*** Changing thread stack size ***
-caught expected ValueError setting stack_size(4096)
-successfully set stack_size(262144)
-successfully set stack_size(1048576)
-successfully set stack_size(0)
-trying stack_size = 262144
-waiting for all tasks to complete
-all tasks done
-trying stack_size = 1048576
-waiting for all tasks to complete
-all tasks done
diff --git a/Lib/test/output/test_tokenize b/Lib/test/output/test_tokenize
deleted file mode 100644
index 6708097..0000000
--- a/Lib/test/output/test_tokenize
+++ /dev/null
@@ -1,715 +0,0 @@
-test_tokenize
-1,0-1,34: COMMENT "# Tests for the 'tokenize' module."
-1,34-1,35: NL '\n'
-2,0-2,42: COMMENT '# Large bits stolen from test_grammar.py. '
-2,42-2,43: NL '\n'
-3,0-3,1: NL '\n'
-4,0-4,10: COMMENT '# Comments'
-4,10-4,11: NL '\n'
-5,0-5,3: STRING '"#"'
-5,3-5,4: NEWLINE '\n'
-6,0-6,2: COMMENT "#'"
-6,2-6,3: NL '\n'
-7,0-7,2: COMMENT '#"'
-7,2-7,3: NL '\n'
-8,0-8,2: COMMENT '#\\'
-8,2-8,3: NL '\n'
-9,7-9,8: COMMENT '#'
-9,8-9,9: NL '\n'
-10,4-10,9: COMMENT '# abc'
-10,9-10,10: NL '\n'
-11,0-12,4: STRING "'''#\n#'''"
-12,4-12,5: NEWLINE '\n'
-13,0-13,1: NL '\n'
-14,0-14,1: NAME 'x'
-14,2-14,3: OP '='
-14,4-14,5: NUMBER '1'
-14,7-14,8: COMMENT '#'
-14,8-14,9: NEWLINE '\n'
-15,0-15,1: NL '\n'
-16,0-16,24: COMMENT '# Balancing continuation'
-16,24-16,25: NL '\n'
-17,0-17,1: NL '\n'
-18,0-18,1: NAME 'a'
-18,2-18,3: OP '='
-18,4-18,5: OP '('
-18,5-18,6: NUMBER '3'
-18,6-18,7: OP ','
-18,8-18,9: NUMBER '4'
-18,9-18,10: OP ','
-18,10-18,11: NL '\n'
-19,2-19,3: NUMBER '5'
-19,3-19,4: OP ','
-19,5-19,6: NUMBER '6'
-19,6-19,7: OP ')'
-19,7-19,8: NEWLINE '\n'
-20,0-20,1: NAME 'y'
-20,2-20,3: OP '='
-20,4-20,5: OP '['
-20,5-20,6: NUMBER '3'
-20,6-20,7: OP ','
-20,8-20,9: NUMBER '4'
-20,9-20,10: OP ','
-20,10-20,11: NL '\n'
-21,2-21,3: NUMBER '5'
-21,3-21,4: OP ']'
-21,4-21,5: NEWLINE '\n'
-22,0-22,1: NAME 'z'
-22,2-22,3: OP '='
-22,4-22,5: OP '{'
-22,5-22,8: STRING "'a'"
-22,8-22,9: OP ':'
-22,9-22,10: NUMBER '5'
-22,10-22,11: OP ','
-22,11-22,12: NL '\n'
-23,2-23,5: STRING "'b'"
-23,5-23,6: OP ':'
-23,6-23,7: NUMBER '6'
-23,7-23,8: OP '}'
-23,8-23,9: NEWLINE '\n'
-24,0-24,1: NAME 'x'
-24,2-24,3: OP '='
-24,4-24,5: OP '('
-24,5-24,8: NAME 'len'
-24,8-24,9: OP '('
-24,9-24,13: NAME 'repr'
-24,13-24,14: OP '('
-24,14-24,15: NAME 'y'
-24,15-24,16: OP ')'
-24,16-24,17: OP ')'
-24,18-24,19: OP '+'
-24,20-24,21: NUMBER '5'
-24,21-24,22: OP '*'
-24,22-24,23: NAME 'x'
-24,24-24,25: OP '-'
-24,26-24,27: NAME 'a'
-24,27-24,28: OP '['
-24,28-24,29: NL '\n'
-25,3-25,4: NUMBER '3'
-25,5-25,6: OP ']'
-25,6-25,7: NL '\n'
-26,3-26,4: OP '-'
-26,5-26,6: NAME 'x'
-26,7-26,8: OP '+'
-26,9-26,12: NAME 'len'
-26,12-26,13: OP '('
-26,13-26,14: OP '{'
-26,14-26,15: NL '\n'
-27,3-27,4: OP '}'
-27,4-27,5: NL '\n'
-28,4-28,5: OP ')'
-28,5-28,6: NL '\n'
-29,2-29,3: OP ')'
-29,3-29,4: NEWLINE '\n'
-30,0-30,1: NL '\n'
-31,0-31,36: COMMENT '# Backslash means line continuation:'
-31,36-31,37: NL '\n'
-32,0-32,1: NAME 'x'
-32,2-32,3: OP '='
-32,4-32,5: NUMBER '1'
-33,0-33,1: OP '+'
-33,2-33,3: NUMBER '1'
-33,3-33,4: NEWLINE '\n'
-34,0-34,1: NL '\n'
-35,0-35,54: COMMENT '# Backslash does not means continuation in comments :\\'
-35,54-35,55: NL '\n'
-36,0-36,1: NAME 'x'
-36,2-36,3: OP '='
-36,4-36,5: NUMBER '0'
-36,5-36,6: NEWLINE '\n'
-37,0-37,1: NL '\n'
-38,0-38,19: COMMENT '# Ordinary integers'
-38,19-38,20: NL '\n'
-39,0-39,4: NUMBER '0xff'
-39,5-39,7: OP '!='
-39,8-39,11: NUMBER '255'
-39,11-39,12: NEWLINE '\n'
-40,0-40,5: NUMBER '0o377'
-40,6-40,8: OP '!='
-40,9-40,12: NUMBER '255'
-40,12-40,13: NEWLINE '\n'
-41,0-41,10: NUMBER '2147483647'
-41,13-41,15: OP '!='
-41,16-41,29: NUMBER '0o17777777777'
-41,29-41,30: NEWLINE '\n'
-42,0-42,1: OP '-'
-42,1-42,11: NUMBER '2147483647'
-42,11-42,12: OP '-'
-42,12-42,13: NUMBER '1'
-42,14-42,16: OP '!='
-42,17-42,30: NUMBER '0o20000000000'
-42,30-42,31: NEWLINE '\n'
-43,0-43,13: NUMBER '0o37777777777'
-43,14-43,16: OP '!='
-43,17-43,18: OP '-'
-43,18-43,19: NUMBER '1'
-43,19-43,20: NEWLINE '\n'
-44,0-44,10: NUMBER '0xffffffff'
-44,11-44,13: OP '!='
-44,14-44,15: OP '-'
-44,15-44,16: NUMBER '1'
-44,16-44,17: OP ';'
-44,18-44,31: NUMBER '0o37777777777'
-44,32-44,34: OP '!='
-44,35-44,36: OP '-'
-44,36-44,37: NUMBER '1'
-44,37-44,38: OP ';'
-44,39-44,40: OP '-'
-44,40-44,49: NUMBER '0o1234567'
-44,50-44,52: OP '=='
-44,53-44,64: NUMBER '0O001234567'
-44,64-44,65: OP ';'
-44,66-44,73: NUMBER '0b10101'
-44,74-44,76: OP '=='
-44,77-44,87: NUMBER '0B00010101'
-44,87-44,88: NEWLINE '\n'
-45,0-45,1: NL '\n'
-46,0-46,15: COMMENT '# Long integers'
-46,15-46,16: NL '\n'
-47,0-47,1: NAME 'x'
-47,2-47,3: OP '='
-47,4-47,5: NUMBER '0'
-47,5-47,6: NEWLINE '\n'
-48,0-48,1: NAME 'x'
-48,2-48,3: OP '='
-48,4-48,5: NUMBER '0'
-48,5-48,6: NEWLINE '\n'
-49,0-49,1: NAME 'x'
-49,2-49,3: OP '='
-49,4-49,22: NUMBER '0xffffffffffffffff'
-49,22-49,23: NEWLINE '\n'
-50,0-50,1: NAME 'x'
-50,2-50,3: OP '='
-50,4-50,22: NUMBER '0xffffffffffffffff'
-50,22-50,23: NEWLINE '\n'
-51,0-51,1: NAME 'x'
-51,2-51,3: OP '='
-51,4-51,23: NUMBER '0o77777777777777777'
-51,23-51,24: NEWLINE '\n'
-52,0-52,1: NAME 'x'
-52,2-52,3: OP '='
-52,4-52,23: NUMBER '0B11101010111111111'
-52,23-52,24: NEWLINE '\n'
-53,0-53,1: NAME 'x'
-53,2-53,3: OP '='
-53,4-53,34: NUMBER '123456789012345678901234567890'
-53,34-53,35: NEWLINE '\n'
-54,0-54,1: NAME 'x'
-54,2-54,3: OP '='
-54,4-54,34: NUMBER '123456789012345678901234567890'
-54,34-54,35: NEWLINE '\n'
-55,0-55,1: NL '\n'
-56,0-56,24: COMMENT '# Floating-point numbers'
-56,24-56,25: NL '\n'
-57,0-57,1: NAME 'x'
-57,2-57,3: OP '='
-57,4-57,8: NUMBER '3.14'
-57,8-57,9: NEWLINE '\n'
-58,0-58,1: NAME 'x'
-58,2-58,3: OP '='
-58,4-58,8: NUMBER '314.'
-58,8-58,9: NEWLINE '\n'
-59,0-59,1: NAME 'x'
-59,2-59,3: OP '='
-59,4-59,9: NUMBER '0.314'
-59,9-59,10: NEWLINE '\n'
-60,0-60,17: COMMENT '# XXX x = 000.314'
-60,17-60,18: NL '\n'
-61,0-61,1: NAME 'x'
-61,2-61,3: OP '='
-61,4-61,8: NUMBER '.314'
-61,8-61,9: NEWLINE '\n'
-62,0-62,1: NAME 'x'
-62,2-62,3: OP '='
-62,4-62,8: NUMBER '3e14'
-62,8-62,9: NEWLINE '\n'
-63,0-63,1: NAME 'x'
-63,2-63,3: OP '='
-63,4-63,8: NUMBER '3E14'
-63,8-63,9: NEWLINE '\n'
-64,0-64,1: NAME 'x'
-64,2-64,3: OP '='
-64,4-64,9: NUMBER '3e-14'
-64,9-64,10: NEWLINE '\n'
-65,0-65,1: NAME 'x'
-65,2-65,3: OP '='
-65,4-65,9: NUMBER '3e+14'
-65,9-65,10: NEWLINE '\n'
-66,0-66,1: NAME 'x'
-66,2-66,3: OP '='
-66,4-66,9: NUMBER '3.e14'
-66,9-66,10: NEWLINE '\n'
-67,0-67,1: NAME 'x'
-67,2-67,3: OP '='
-67,4-67,9: NUMBER '.3e14'
-67,9-67,10: NEWLINE '\n'
-68,0-68,1: NAME 'x'
-68,2-68,3: OP '='
-68,4-68,9: NUMBER '3.1e4'
-68,9-68,10: NEWLINE '\n'
-69,0-69,1: NL '\n'
-70,0-70,17: COMMENT '# String literals'
-70,17-70,18: NL '\n'
-71,0-71,1: NAME 'x'
-71,2-71,3: OP '='
-71,4-71,6: STRING "''"
-71,6-71,7: OP ';'
-71,8-71,9: NAME 'y'
-71,10-71,11: OP '='
-71,12-71,14: STRING '""'
-71,14-71,15: OP ';'
-71,15-71,16: NEWLINE '\n'
-72,0-72,1: NAME 'x'
-72,2-72,3: OP '='
-72,4-72,8: STRING "'\\''"
-72,8-72,9: OP ';'
-72,10-72,11: NAME 'y'
-72,12-72,13: OP '='
-72,14-72,17: STRING '"\'"'
-72,17-72,18: OP ';'
-72,18-72,19: NEWLINE '\n'
-73,0-73,1: NAME 'x'
-73,2-73,3: OP '='
-73,4-73,7: STRING '\'"\''
-73,7-73,8: OP ';'
-73,9-73,10: NAME 'y'
-73,11-73,12: OP '='
-73,13-73,17: STRING '"\\""'
-73,17-73,18: OP ';'
-73,18-73,19: NEWLINE '\n'
-74,0-74,1: NAME 'x'
-74,2-74,3: OP '='
-74,4-74,32: STRING '"doesn\'t \\"shrink\\" does it"'
-74,32-74,33: NEWLINE '\n'
-75,0-75,1: NAME 'y'
-75,2-75,3: OP '='
-75,4-75,31: STRING '\'doesn\\\'t "shrink" does it\''
-75,31-75,32: NEWLINE '\n'
-76,0-76,1: NAME 'x'
-76,2-76,3: OP '='
-76,4-76,32: STRING '"does \\"shrink\\" doesn\'t it"'
-76,32-76,33: NEWLINE '\n'
-77,0-77,1: NAME 'y'
-77,2-77,3: OP '='
-77,4-77,31: STRING '\'does "shrink" doesn\\\'t it\''
-77,31-77,32: NEWLINE '\n'
-78,0-78,1: NAME 'x'
-78,2-78,3: OP '='
-78,4-83,3: STRING '"""\nThe "quick"\nbrown fox\njumps over\nthe \'lazy\' dog.\n"""'
-83,3-83,4: NEWLINE '\n'
-84,0-84,1: NAME 'y'
-84,2-84,3: OP '='
-84,4-84,63: STRING '\'\\nThe "quick"\\nbrown fox\\njumps over\\nthe \\\'lazy\\\' dog.\\n\''
-84,63-84,64: NEWLINE '\n'
-85,0-85,1: NAME 'y'
-85,2-85,3: OP '='
-85,4-90,3: STRING '\'\'\'\nThe "quick"\nbrown fox\njumps over\nthe \'lazy\' dog.\n\'\'\''
-90,3-90,4: OP ';'
-90,4-90,5: NEWLINE '\n'
-91,0-91,1: NAME 'y'
-91,2-91,3: OP '='
-91,4-96,1: STRING '"\\n\\\nThe \\"quick\\"\\n\\\nbrown fox\\n\\\njumps over\\n\\\nthe \'lazy\' dog.\\n\\\n"'
-96,1-96,2: OP ';'
-96,2-96,3: NEWLINE '\n'
-97,0-97,1: NAME 'y'
-97,2-97,3: OP '='
-97,4-102,1: STRING '\'\\n\\\nThe \\"quick\\"\\n\\\nbrown fox\\n\\\njumps over\\n\\\nthe \\\'lazy\\\' dog.\\n\\\n\''
-102,1-102,2: OP ';'
-102,2-102,3: NEWLINE '\n'
-103,0-103,1: NAME 'x'
-103,2-103,3: OP '='
-103,4-103,9: STRING "r'\\\\'"
-103,10-103,11: OP '+'
-103,12-103,17: STRING "R'\\\\'"
-103,17-103,18: NEWLINE '\n'
-104,0-104,1: NAME 'x'
-104,2-104,3: OP '='
-104,4-104,9: STRING "r'\\''"
-104,10-104,11: OP '+'
-104,12-104,14: STRING "''"
-104,14-104,15: NEWLINE '\n'
-105,0-105,1: NAME 'y'
-105,2-105,3: OP '='
-105,4-107,6: STRING "r'''\nfoo bar \\\\\nbaz'''"
-107,7-107,8: OP '+'
-107,9-108,6: STRING "R'''\nfoo'''"
-108,6-108,7: NEWLINE '\n'
-109,0-109,1: NAME 'y'
-109,2-109,3: OP '='
-109,4-111,3: STRING 'r"""foo\nbar \\\\ baz\n"""'
-111,4-111,5: OP '+'
-111,6-112,3: STRING "R'''spam\n'''"
-112,3-112,4: NEWLINE '\n'
-113,0-113,1: NAME 'x'
-113,2-113,3: OP '='
-113,4-113,10: STRING "b'abc'"
-113,11-113,12: OP '+'
-113,13-113,19: STRING "B'ABC'"
-113,19-113,20: NEWLINE '\n'
-114,0-114,1: NAME 'y'
-114,2-114,3: OP '='
-114,4-114,10: STRING 'b"abc"'
-114,11-114,12: OP '+'
-114,13-114,19: STRING 'B"ABC"'
-114,19-114,20: NEWLINE '\n'
-115,0-115,1: NAME 'x'
-115,2-115,3: OP '='
-115,4-115,11: STRING "br'abc'"
-115,12-115,13: OP '+'
-115,14-115,21: STRING "Br'ABC'"
-115,22-115,23: OP '+'
-115,24-115,31: STRING "bR'ABC'"
-115,32-115,33: OP '+'
-115,34-115,41: STRING "BR'ABC'"
-115,41-115,42: NEWLINE '\n'
-116,0-116,1: NAME 'y'
-116,2-116,3: OP '='
-116,4-116,11: STRING 'br"abc"'
-116,12-116,13: OP '+'
-116,14-116,21: STRING 'Br"ABC"'
-116,22-116,23: OP '+'
-116,24-116,31: STRING 'bR"ABC"'
-116,32-116,33: OP '+'
-116,34-116,41: STRING 'BR"ABC"'
-116,41-116,42: NEWLINE '\n'
-117,0-117,1: NAME 'x'
-117,2-117,3: OP '='
-117,4-117,10: STRING "br'\\\\'"
-117,11-117,12: OP '+'
-117,13-117,19: STRING "BR'\\\\'"
-117,19-117,20: NEWLINE '\n'
-118,0-118,1: NAME 'x'
-118,2-118,3: OP '='
-118,4-118,10: STRING "br'\\''"
-118,11-118,12: OP '+'
-118,13-118,15: STRING "''"
-118,15-118,16: NEWLINE '\n'
-119,0-119,1: NAME 'y'
-119,2-119,3: OP '='
-119,4-121,6: STRING "br'''\nfoo bar \\\\\nbaz'''"
-121,7-121,8: OP '+'
-121,9-122,6: STRING "BR'''\nfoo'''"
-122,6-122,7: NEWLINE '\n'
-123,0-123,1: NAME 'y'
-123,2-123,3: OP '='
-123,4-125,3: STRING 'Br"""foo\nbar \\\\ baz\n"""'
-125,4-125,5: OP '+'
-125,6-126,3: STRING "bR'''spam\n'''"
-126,3-126,4: NEWLINE '\n'
-127,0-127,1: NL '\n'
-128,0-128,13: COMMENT '# Indentation'
-128,13-128,14: NL '\n'
-129,0-129,2: NAME 'if'
-129,3-129,4: NUMBER '1'
-129,4-129,5: OP ':'
-129,5-129,6: NEWLINE '\n'
-130,0-130,4: INDENT ' '
-130,4-130,5: NAME 'x'
-130,6-130,7: OP '='
-130,8-130,9: NUMBER '2'
-130,9-130,10: NEWLINE '\n'
-131,0-131,0: DEDENT ''
-131,0-131,2: NAME 'if'
-131,3-131,4: NUMBER '1'
-131,4-131,5: OP ':'
-131,5-131,6: NEWLINE '\n'
-132,0-132,8: INDENT ' '
-132,8-132,9: NAME 'x'
-132,10-132,11: OP '='
-132,12-132,13: NUMBER '2'
-132,13-132,14: NEWLINE '\n'
-133,0-133,0: DEDENT ''
-133,0-133,2: NAME 'if'
-133,3-133,4: NUMBER '1'
-133,4-133,5: OP ':'
-133,5-133,6: NEWLINE '\n'
-134,0-134,4: INDENT ' '
-134,4-134,9: NAME 'while'
-134,10-134,11: NUMBER '0'
-134,11-134,12: OP ':'
-134,12-134,13: NEWLINE '\n'
-135,0-135,5: INDENT ' '
-135,5-135,7: NAME 'if'
-135,8-135,9: NUMBER '0'
-135,9-135,10: OP ':'
-135,10-135,11: NEWLINE '\n'
-136,0-136,11: INDENT ' '
-136,11-136,12: NAME 'x'
-136,13-136,14: OP '='
-136,15-136,16: NUMBER '2'
-136,16-136,17: NEWLINE '\n'
-137,5-137,5: DEDENT ''
-137,5-137,6: NAME 'x'
-137,7-137,8: OP '='
-137,9-137,10: NUMBER '2'
-137,10-137,11: NEWLINE '\n'
-138,0-138,0: DEDENT ''
-138,0-138,0: DEDENT ''
-138,0-138,2: NAME 'if'
-138,3-138,4: NUMBER '0'
-138,4-138,5: OP ':'
-138,5-138,6: NEWLINE '\n'
-139,0-139,2: INDENT ' '
-139,2-139,4: NAME 'if'
-139,5-139,6: NUMBER '2'
-139,6-139,7: OP ':'
-139,7-139,8: NEWLINE '\n'
-140,0-140,3: INDENT ' '
-140,3-140,8: NAME 'while'
-140,9-140,10: NUMBER '0'
-140,10-140,11: OP ':'
-140,11-140,12: NEWLINE '\n'
-141,0-141,8: INDENT ' '
-141,8-141,10: NAME 'if'
-141,11-141,12: NUMBER '1'
-141,12-141,13: OP ':'
-141,13-141,14: NEWLINE '\n'
-142,0-142,10: INDENT ' '
-142,10-142,11: NAME 'x'
-142,12-142,13: OP '='
-142,14-142,15: NUMBER '2'
-142,15-142,16: NEWLINE '\n'
-143,0-143,1: NL '\n'
-144,0-144,11: COMMENT '# Operators'
-144,11-144,12: NL '\n'
-145,0-145,1: NL '\n'
-146,0-146,0: DEDENT ''
-146,0-146,0: DEDENT ''
-146,0-146,0: DEDENT ''
-146,0-146,0: DEDENT ''
-146,0-146,3: NAME 'def'
-146,4-146,7: NAME 'd22'
-146,7-146,8: OP '('
-146,8-146,9: NAME 'a'
-146,9-146,10: OP ','
-146,11-146,12: NAME 'b'
-146,12-146,13: OP ','
-146,14-146,15: NAME 'c'
-146,15-146,16: OP '='
-146,16-146,17: NUMBER '1'
-146,17-146,18: OP ','
-146,19-146,20: NAME 'd'
-146,20-146,21: OP '='
-146,21-146,22: NUMBER '2'
-146,22-146,23: OP ')'
-146,23-146,24: OP ':'
-146,25-146,29: NAME 'pass'
-146,29-146,30: NEWLINE '\n'
-147,0-147,3: NAME 'def'
-147,4-147,8: NAME 'd01v'
-147,8-147,9: OP '('
-147,9-147,10: NAME 'a'
-147,10-147,11: OP '='
-147,11-147,12: NUMBER '1'
-147,12-147,13: OP ','
-147,14-147,15: OP '*'
-147,15-147,20: NAME 'restt'
-147,20-147,21: OP ','
-147,22-147,24: OP '**'
-147,24-147,29: NAME 'restd'
-147,29-147,30: OP ')'
-147,30-147,31: OP ':'
-147,32-147,36: NAME 'pass'
-147,36-147,37: NEWLINE '\n'
-148,0-148,1: NL '\n'
-149,0-149,1: OP '('
-149,1-149,2: NAME 'x'
-149,2-149,3: OP ','
-149,4-149,5: NAME 'y'
-149,5-149,6: OP ')'
-149,7-149,9: OP '!='
-149,10-149,11: OP '('
-149,11-149,12: OP '{'
-149,12-149,15: STRING "'a'"
-149,15-149,16: OP ':'
-149,16-149,17: NUMBER '1'
-149,17-149,18: OP '}'
-149,18-149,19: OP ','
-149,20-149,21: OP '{'
-149,21-149,24: STRING "'b'"
-149,24-149,25: OP ':'
-149,25-149,26: NUMBER '2'
-149,26-149,27: OP '}'
-149,27-149,28: OP ')'
-149,28-149,29: NEWLINE '\n'
-150,0-150,1: NL '\n'
-151,0-151,12: COMMENT '# comparison'
-151,12-151,13: NL '\n'
-152,0-152,2: NAME 'if'
-152,3-152,4: NUMBER '1'
-152,5-152,6: OP '<'
-152,7-152,8: NUMBER '1'
-152,9-152,10: OP '>'
-152,11-152,12: NUMBER '1'
-152,13-152,15: OP '=='
-152,16-152,17: NUMBER '1'
-152,18-152,20: OP '>='
-152,21-152,22: NUMBER '1'
-152,23-152,25: OP '<='
-152,26-152,27: NUMBER '1'
-152,28-152,30: OP '!='
-152,31-152,32: NUMBER '1'
-152,33-152,35: OP '!='
-152,36-152,37: NUMBER '1'
-152,38-152,40: NAME 'in'
-152,41-152,42: NUMBER '1'
-152,43-152,46: NAME 'not'
-152,47-152,49: NAME 'in'
-152,50-152,51: NUMBER '1'
-152,52-152,54: NAME 'is'
-152,55-152,56: NUMBER '1'
-152,57-152,59: NAME 'is'
-152,60-152,63: NAME 'not'
-152,64-152,65: NUMBER '1'
-152,65-152,66: OP ':'
-152,67-152,71: NAME 'pass'
-152,71-152,72: NEWLINE '\n'
-153,0-153,1: NL '\n'
-154,0-154,8: COMMENT '# binary'
-154,8-154,9: NL '\n'
-155,0-155,1: NAME 'x'
-155,2-155,3: OP '='
-155,4-155,5: NUMBER '1'
-155,6-155,7: OP '&'
-155,8-155,9: NUMBER '1'
-155,9-155,10: NEWLINE '\n'
-156,0-156,1: NAME 'x'
-156,2-156,3: OP '='
-156,4-156,5: NUMBER '1'
-156,6-156,7: OP '^'
-156,8-156,9: NUMBER '1'
-156,9-156,10: NEWLINE '\n'
-157,0-157,1: NAME 'x'
-157,2-157,3: OP '='
-157,4-157,5: NUMBER '1'
-157,6-157,7: OP '|'
-157,8-157,9: NUMBER '1'
-157,9-157,10: NEWLINE '\n'
-158,0-158,1: NL '\n'
-159,0-159,7: COMMENT '# shift'
-159,7-159,8: NL '\n'
-160,0-160,1: NAME 'x'
-160,2-160,3: OP '='
-160,4-160,5: NUMBER '1'
-160,6-160,8: OP '<<'
-160,9-160,10: NUMBER '1'
-160,11-160,13: OP '>>'
-160,14-160,15: NUMBER '1'
-160,15-160,16: NEWLINE '\n'
-161,0-161,1: NL '\n'
-162,0-162,10: COMMENT '# additive'
-162,10-162,11: NL '\n'
-163,0-163,1: NAME 'x'
-163,2-163,3: OP '='
-163,4-163,5: NUMBER '1'
-163,6-163,7: OP '-'
-163,8-163,9: NUMBER '1'
-163,10-163,11: OP '+'
-163,12-163,13: NUMBER '1'
-163,14-163,15: OP '-'
-163,16-163,17: NUMBER '1'
-163,18-163,19: OP '+'
-163,20-163,21: NUMBER '1'
-163,21-163,22: NEWLINE '\n'
-164,0-164,1: NL '\n'
-165,0-165,16: COMMENT '# multiplicative'
-165,16-165,17: NL '\n'
-166,0-166,1: NAME 'x'
-166,2-166,3: OP '='
-166,4-166,5: NUMBER '1'
-166,6-166,7: OP '/'
-166,8-166,9: NUMBER '1'
-166,10-166,11: OP '*'
-166,12-166,13: NUMBER '1'
-166,14-166,15: OP '%'
-166,16-166,17: NUMBER '1'
-166,17-166,18: NEWLINE '\n'
-167,0-167,1: NL '\n'
-168,0-168,7: COMMENT '# unary'
-168,7-168,8: NL '\n'
-169,0-169,1: NAME 'x'
-169,2-169,3: OP '='
-169,4-169,5: OP '~'
-169,5-169,6: NUMBER '1'
-169,7-169,8: OP '^'
-169,9-169,10: NUMBER '1'
-169,11-169,12: OP '&'
-169,13-169,14: NUMBER '1'
-169,15-169,16: OP '|'
-169,17-169,18: NUMBER '1'
-169,19-169,20: OP '&'
-169,21-169,22: NUMBER '1'
-169,23-169,24: OP '^'
-169,25-169,26: OP '-'
-169,26-169,27: NUMBER '1'
-169,27-169,28: NEWLINE '\n'
-170,0-170,1: NAME 'x'
-170,2-170,3: OP '='
-170,4-170,5: OP '-'
-170,5-170,6: NUMBER '1'
-170,6-170,7: OP '*'
-170,7-170,8: NUMBER '1'
-170,8-170,9: OP '/'
-170,9-170,10: NUMBER '1'
-170,11-170,12: OP '+'
-170,13-170,14: NUMBER '1'
-170,14-170,15: OP '*'
-170,15-170,16: NUMBER '1'
-170,17-170,18: OP '-'
-170,19-170,20: OP '-'
-170,20-170,21: OP '-'
-170,21-170,22: OP '-'
-170,22-170,23: NUMBER '1'
-170,23-170,24: OP '*'
-170,24-170,25: NUMBER '1'
-170,25-170,26: NEWLINE '\n'
-171,0-171,1: NL '\n'
-172,0-172,10: COMMENT '# selector'
-172,10-172,11: NL '\n'
-173,0-173,6: NAME 'import'
-173,7-173,10: NAME 'sys'
-173,10-173,11: OP ','
-173,12-173,16: NAME 'time'
-173,16-173,17: NEWLINE '\n'
-174,0-174,1: NAME 'x'
-174,2-174,3: OP '='
-174,4-174,7: NAME 'sys'
-174,7-174,8: OP '.'
-174,8-174,15: NAME 'modules'
-174,15-174,16: OP '['
-174,16-174,22: STRING "'time'"
-174,22-174,23: OP ']'
-174,23-174,24: OP '.'
-174,24-174,28: NAME 'time'
-174,28-174,29: OP '('
-174,29-174,30: OP ')'
-174,30-174,31: NEWLINE '\n'
-175,0-175,1: NL '\n'
-176,0-176,1: OP '@'
-176,1-176,13: NAME 'staticmethod'
-176,13-176,14: NEWLINE '\n'
-177,0-177,3: NAME 'def'
-177,4-177,7: NAME 'foo'
-177,7-177,8: OP '('
-177,8-177,9: OP ')'
-177,9-177,10: OP ':'
-177,11-177,15: NAME 'pass'
-177,15-177,16: NEWLINE '\n'
-178,0-178,1: NL '\n'
-179,0-179,1: OP '@'
-179,1-179,13: NAME 'staticmethod'
-179,13-179,14: NEWLINE '\n'
-180,0-180,3: NAME 'def'
-180,4-180,7: NAME 'foo'
-180,7-180,8: OP '('
-180,8-180,9: NAME 'x'
-180,9-180,10: OP ':'
-180,10-180,11: NUMBER '1'
-180,11-180,12: OP ')'
-180,12-180,14: OP '->'
-180,14-180,15: NUMBER '1'
-180,15-180,16: OP ':'
-180,17-180,21: NAME 'pass'
-180,21-180,22: NEWLINE '\n'
-181,0-181,1: NL '\n'
-182,0-182,0: ENDMARKER ''
diff --git a/Lib/test/test_crypt.py b/Lib/test/test_crypt.py
index a9c28cd..aa07f49 100755
--- a/Lib/test/test_crypt.py
+++ b/Lib/test/test_crypt.py
@@ -1,11 +1,16 @@
-#! /usr/bin/env python
-"""Simple test script for cryptmodule.c
- Roger E. Masse
-"""
-
-from test.test_support import verbose
+from test import test_support
+import unittest
import crypt
-c = crypt.crypt('mypassword', 'ab')
-if verbose:
- print('Test encryption: ', c)
+class CryptTestCase(unittest.TestCase):
+
+ def test_crypt(self):
+ c = crypt.crypt('mypassword', 'ab')
+ if test_support.verbose:
+ print('Test encryption: ', c)
+
+def test_main():
+ test_support.run_unittest(CryptTestCase)
+
+if __name__ == "__main__":
+ test_main()
diff --git a/Lib/test/test_datetime.py b/Lib/test/test_datetime.py
index e768a9c..e83048e 100644
--- a/Lib/test/test_datetime.py
+++ b/Lib/test/test_datetime.py
@@ -1521,11 +1521,12 @@
self.failUnless(abs(from_timestamp - from_now) <= tolerance)
def test_strptime(self):
- import time
+ import _strptime
- string = '2004-12-01 13:02:47'
- format = '%Y-%m-%d %H:%M:%S'
- expected = self.theclass(*(time.strptime(string, format)[0:6]))
+ string = '2004-12-01 13:02:47.197'
+ format = '%Y-%m-%d %H:%M:%S.%f'
+ result, frac = _strptime._strptime(string, format)
+ expected = self.theclass(*(result[0:6]+(frac,)))
got = self.theclass.strptime(string, format)
self.assertEqual(expected, got)
@@ -1553,9 +1554,9 @@
def test_more_strftime(self):
# This tests fields beyond those tested by the TestDate.test_strftime.
- t = self.theclass(2004, 12, 31, 6, 22, 33)
- self.assertEqual(t.strftime("%m %d %y %S %M %H %j"),
- "12 31 04 33 22 06 366")
+ t = self.theclass(2004, 12, 31, 6, 22, 33, 47)
+ self.assertEqual(t.strftime("%m %d %y %f %S %M %H %j"),
+ "12 31 04 000047 33 22 06 366")
def test_extract(self):
dt = self.theclass(2002, 3, 4, 18, 45, 3, 1234)
@@ -1828,7 +1829,7 @@
def test_strftime(self):
t = self.theclass(1, 2, 3, 4)
- self.assertEqual(t.strftime('%H %M %S'), "01 02 03")
+ self.assertEqual(t.strftime('%H %M %S %f'), "01 02 03 000004")
# A naive object replaces %z and %Z with empty strings.
self.assertEqual(t.strftime("'%z' '%Z'"), "'' ''")
diff --git a/Lib/test/test_fcntl.py b/Lib/test/test_fcntl.py
index 870876d..665f5b3 100755
--- a/Lib/test/test_fcntl.py
+++ b/Lib/test/test_fcntl.py
@@ -1,69 +1,88 @@
-#! /usr/bin/env python
"""Test program for the fcntl C module.
- OS/2+EMX doesn't support the file locking operations.
- Roger E. Masse
+
+OS/2+EMX doesn't support the file locking operations.
+
"""
import struct
import fcntl
import os, sys
-from test.test_support import verbose, TESTFN
+import unittest
+from test.test_support import verbose, TESTFN, unlink, run_unittest
-filename = TESTFN
+# TODO - Write tests for ioctl(), flock() and lockf().
-try:
- os.O_LARGEFILE
-except AttributeError:
- start_len = "ll"
-else:
- start_len = "qq"
-if sys.platform.startswith('atheos'):
- start_len = "qq"
-
-if sys.platform in ('netbsd1', 'netbsd2', 'netbsd3',
- 'Darwin1.2', 'darwin',
- 'freebsd2', 'freebsd3', 'freebsd4', 'freebsd5',
- 'freebsd6', 'freebsd7', 'freebsd8',
- 'bsdos2', 'bsdos3', 'bsdos4',
- 'openbsd', 'openbsd2', 'openbsd3', 'openbsd4'):
- if struct.calcsize('l') == 8:
- off_t = 'l'
- pid_t = 'i'
+def get_lockdata():
+ if sys.platform.startswith('atheos'):
+ start_len = "qq"
else:
- off_t = 'lxxxx'
- pid_t = 'l'
- lockdata = struct.pack(off_t+off_t+pid_t+'hh', 0, 0, 0, fcntl.F_WRLCK, 0)
-elif sys.platform in ['aix3', 'aix4', 'hp-uxB', 'unixware7']:
- lockdata = struct.pack('hhlllii', fcntl.F_WRLCK, 0, 0, 0, 0, 0, 0)
-elif sys.platform in ['os2emx']:
- lockdata = None
-else:
- lockdata = struct.pack('hh'+start_len+'hh', fcntl.F_WRLCK, 0, 0, 0, 0, 0)
-if lockdata:
- if verbose:
- print('struct.pack: ', repr(lockdata))
+ try:
+ os.O_LARGEFILE
+ except AttributeError:
+ start_len = "ll"
+ else:
+ start_len = "qq"
-# the example from the library docs
-f = open(filename, 'w')
-rv = fcntl.fcntl(f.fileno(), fcntl.F_SETFL, os.O_NONBLOCK)
-if verbose:
- print('Status from fcntl with O_NONBLOCK: ', rv)
+ if sys.platform in ('netbsd1', 'netbsd2', 'netbsd3',
+ 'Darwin1.2', 'darwin',
+ 'freebsd2', 'freebsd3', 'freebsd4', 'freebsd5',
+ 'freebsd6', 'freebsd7', 'freebsd8',
+ 'bsdos2', 'bsdos3', 'bsdos4',
+ 'openbsd', 'openbsd2', 'openbsd3', 'openbsd4'):
+ if struct.calcsize('l') == 8:
+ off_t = 'l'
+ pid_t = 'i'
+ else:
+ off_t = 'lxxxx'
+ pid_t = 'l'
+ lockdata = struct.pack(off_t + off_t + pid_t + 'hh', 0, 0, 0,
+ fcntl.F_WRLCK, 0)
+ elif sys.platform in ['aix3', 'aix4', 'hp-uxB', 'unixware7']:
+ lockdata = struct.pack('hhlllii', fcntl.F_WRLCK, 0, 0, 0, 0, 0, 0)
+ elif sys.platform in ['os2emx']:
+ lockdata = None
+ else:
+ lockdata = struct.pack('hh'+start_len+'hh', fcntl.F_WRLCK, 0, 0, 0, 0, 0)
+ if lockdata:
+ if verbose:
+ print('struct.pack: ', repr(lockdata))
+ return lockdata
-if sys.platform not in ['os2emx']:
- rv = fcntl.fcntl(f.fileno(), fcntl.F_SETLKW, lockdata)
- if verbose:
- print('String from fcntl with F_SETLKW: ', repr(rv))
+lockdata = get_lockdata()
-f.close()
-os.unlink(filename)
+class TestFcntl(unittest.TestCase):
+
+ def setUp(self):
+ self.f = None
+
+ def tearDown(self):
+ if not self.f.closed:
+ self.f.close()
+ unlink(TESTFN)
+
+ def test_fcntl_fileno(self):
+ # the example from the library docs
+ self.f = open(TESTFN, 'w')
+ rv = fcntl.fcntl(self.f.fileno(), fcntl.F_SETFL, os.O_NONBLOCK)
+ if verbose:
+ print('Status from fcntl with O_NONBLOCK: ', rv)
+ if sys.platform not in ['os2emx']:
+ rv = fcntl.fcntl(self.f.fileno(), fcntl.F_SETLKW, lockdata)
+ if verbose:
+ print('String from fcntl with F_SETLKW: ', repr(rv))
+ self.f.close()
+
+ def test_fcntl_file_descriptor(self):
+ # again, but pass the file rather than numeric descriptor
+ self.f = open(TESTFN, 'w')
+ rv = fcntl.fcntl(self.f, fcntl.F_SETFL, os.O_NONBLOCK)
+ if sys.platform not in ['os2emx']:
+ rv = fcntl.fcntl(self.f, fcntl.F_SETLKW, lockdata)
+ self.f.close()
-# Again, but pass the file rather than numeric descriptor:
-f = open(filename, 'w')
-rv = fcntl.fcntl(f, fcntl.F_SETFL, os.O_NONBLOCK)
+def test_main():
+ run_unittest(TestFcntl)
-if sys.platform not in ['os2emx']:
- rv = fcntl.fcntl(f, fcntl.F_SETLKW, lockdata)
-
-f.close()
-os.unlink(filename)
+if __name__ == '__main__':
+ test_main()
diff --git a/Lib/test/test_gdbm.py b/Lib/test/test_gdbm.py
index ee68277..17a7f63 100755
--- a/Lib/test/test_gdbm.py
+++ b/Lib/test/test_gdbm.py
@@ -1,46 +1,81 @@
-#! /usr/bin/env python
-"""Test script for the gdbm module
- Roger E. Masse
-"""
-
import gdbm
-from gdbm import error
-from test.test_support import verbose, verify, TestFailed, TESTFN
+import unittest
+import os
+from test.test_support import verbose, TESTFN, run_unittest, unlink
+
filename = TESTFN
-g = gdbm.open(filename, 'c')
-verify(g.keys() == [])
-g[b'a'] = b'b'
-g[b'12345678910'] = b'019237410982340912840198242'
-a = g.keys()
-if verbose:
- print('Test gdbm file keys: ', a)
+class TestGdbm(unittest.TestCase):
+ def setUp(self):
+ self.g = None
-b'a' in g
-g.close()
-try:
- g['a']
-except error:
- pass
-else:
- raise TestFailed("expected gdbm.error accessing closed database")
-g = gdbm.open(filename, 'r')
-g.close()
-g = gdbm.open(filename, 'w')
-g.close()
-g = gdbm.open(filename, 'n')
-g.close()
-try:
- g = gdbm.open(filename, 'rx')
- g.close()
-except error:
- pass
-else:
- raise TestFailed("expected gdbm.error when passing invalid open flags")
+ def tearDown(self):
+ if self.g is not None:
+ self.g.close()
+ unlink(filename)
-try:
- import os
- os.unlink(filename)
-except:
- pass
+ def test_key_methods(self):
+ self.g = gdbm.open(filename, 'c')
+ self.assertEqual(self.g.keys(), [])
+ self.g['a'] = 'b'
+ self.g['12345678910'] = '019237410982340912840198242'
+ key_set = set(self.g.keys())
+ self.assertEqual(key_set, set([b'a', b'12345678910']))
+ self.assert_(b'a' in self.g)
+ key = self.g.firstkey()
+ while key:
+ self.assert_(key in key_set)
+ key_set.remove(key)
+ key = self.g.nextkey(key)
+ self.assertRaises(KeyError, lambda: self.g['xxx'])
+
+ def test_error_conditions(self):
+ # Try to open a non-existent database.
+ unlink(filename)
+ self.assertRaises(gdbm.error, gdbm.open, filename, 'r')
+ # Try to access a closed database.
+ self.g = gdbm.open(filename, 'c')
+ self.g.close()
+ self.assertRaises(gdbm.error, lambda: self.g['a'])
+ # try pass an invalid open flag
+ self.assertRaises(gdbm.error, lambda: gdbm.open(filename, 'rx').close())
+
+ def test_flags(self):
+ # Test the flag parameter open() by trying all supported flag modes.
+ all = set(gdbm.open_flags)
+ # Test standard flags (presumably "crwn").
+ modes = all - set('fsu')
+ for mode in modes:
+ self.g = gdbm.open(filename, mode)
+ self.g.close()
+
+ # Test additional flags (presumably "fsu").
+ flags = all - set('crwn')
+ for mode in modes:
+ for flag in flags:
+ self.g = gdbm.open(filename, mode + flag)
+ self.g.close()
+
+ def test_reorganize(self):
+ self.g = gdbm.open(filename, 'c')
+ size0 = os.path.getsize(filename)
+
+ self.g['x'] = 'x' * 10000
+ size1 = os.path.getsize(filename)
+ self.assert_(size0 < size1)
+
+ del self.g['x']
+ # 'size' is supposed to be the same even after deleting an entry.
+ self.assertEqual(os.path.getsize(filename), size1)
+
+ self.g.reorganize()
+ size2 = os.path.getsize(filename)
+ self.assert_(size1 > size2 >= size0)
+
+
+def test_main():
+ run_unittest(TestGdbm)
+
+if __name__ == '__main__':
+ test_main()
diff --git a/Lib/test/test_grammar.py b/Lib/test/test_grammar.py
index 04aedd5..4c0eda5 100644
--- a/Lib/test/test_grammar.py
+++ b/Lib/test/test_grammar.py
@@ -310,6 +310,10 @@
def f(*, k=1): return closure
def f() -> int: return closure
+ # Check ast errors in *args and *kwargs
+ check_syntax_error(self, "f(*g(1=2))")
+ check_syntax_error(self, "f(**g(1=2))")
+
def testLambdef(self):
### lambdef: 'lambda' [varargslist] ':' test
l1 = lambda : 0
diff --git a/Lib/test/test_heapq.py b/Lib/test/test_heapq.py
index 1e21736..24d2992 100644
--- a/Lib/test/test_heapq.py
+++ b/Lib/test/test_heapq.py
@@ -107,6 +107,34 @@
self.assertRaises(TypeError, self.module.heapreplace, None, None)
self.assertRaises(IndexError, self.module.heapreplace, [], None)
+ def test_nbest_with_pushpop(self):
+ data = [random.randrange(2000) for i in range(1000)]
+ heap = data[:10]
+ self.module.heapify(heap)
+ for item in data[10:]:
+ self.module.heappushpop(heap, item)
+ self.assertEqual(list(self.heapiter(heap)), sorted(data)[-10:])
+ self.assertEqual(self.module.heappushpop([], 'x'), 'x')
+
+ def test_heappushpop(self):
+ h = []
+ x = self.module.heappushpop(h, 10)
+ self.assertEqual((h, x), ([], 10))
+
+ h = [10]
+ x = self.module.heappushpop(h, 10.0)
+ self.assertEqual((h, x), ([10], 10.0))
+ self.assertEqual(type(h[0]), int)
+ self.assertEqual(type(x), float)
+
+ h = [10];
+ x = self.module.heappushpop(h, 9)
+ self.assertEqual((h, x), ([10], 9))
+
+ h = [10];
+ x = self.module.heappushpop(h, 11)
+ self.assertEqual((h, x), ([11], 10))
+
def test_heapsort(self):
# Exercise everything with repeated heapsort checks
for trial in range(100):
diff --git a/Lib/test/test_itertools.py b/Lib/test/test_itertools.py
index d44235b..335e47d 100644
--- a/Lib/test/test_itertools.py
+++ b/Lib/test/test_itertools.py
@@ -51,22 +51,21 @@
'Factorial'
return prod(range(1, n+1))
-def permutations(iterable, r=None):
- # XXX use this until real permutations code is added
- pool = tuple(iterable)
- n = len(pool)
- r = n if r is None else r
- for indices in product(range(n), repeat=r):
- if len(set(indices)) == r:
- yield tuple(pool[i] for i in indices)
-
class TestBasicOps(unittest.TestCase):
def test_chain(self):
- self.assertEqual(list(chain('abc', 'def')), list('abcdef'))
- self.assertEqual(list(chain('abc')), list('abc'))
- self.assertEqual(list(chain('')), [])
- self.assertEqual(take(4, chain('abc', 'def')), list('abcd'))
- self.assertRaises(TypeError, list,chain(2, 3))
+
+ def chain2(*iterables):
+ 'Pure python version in the docs'
+ for it in iterables:
+ for element in it:
+ yield element
+
+ for c in (chain, chain2):
+ self.assertEqual(list(c('abc', 'def')), list('abcdef'))
+ self.assertEqual(list(c('abc')), list('abc'))
+ self.assertEqual(list(c('')), [])
+ self.assertEqual(take(4, c('abc', 'def')), list('abcd'))
+ self.assertRaises(TypeError, list,c(2, 3))
def test_chain_from_iterable(self):
self.assertEqual(list(chain.from_iterable(['abc', 'def'])), list('abcdef'))
@@ -121,6 +120,8 @@
self.assertEqual(len(set(c)), r) # no duplicate elements
self.assertEqual(list(c), sorted(c)) # keep original ordering
self.assert_(all(e in values for e in c)) # elements taken from input iterable
+ self.assertEqual(list(c),
+ [e for e in values if e in c]) # comb is a subsequence of the input iterable
self.assertEqual(result, list(combinations1(values, r))) # matches first pure python version
self.assertEqual(result, list(combinations2(values, r))) # matches first pure python version
@@ -131,9 +132,10 @@
def test_permutations(self):
self.assertRaises(TypeError, permutations) # too few arguments
self.assertRaises(TypeError, permutations, 'abc', 2, 1) # too many arguments
-## self.assertRaises(TypeError, permutations, None) # pool is not iterable
-## self.assertRaises(ValueError, permutations, 'abc', -2) # r is negative
-## self.assertRaises(ValueError, permutations, 'abc', 32) # r is too big
+ self.assertRaises(TypeError, permutations, None) # pool is not iterable
+ self.assertRaises(ValueError, permutations, 'abc', -2) # r is negative
+ self.assertRaises(ValueError, permutations, 'abc', 32) # r is too big
+ self.assertRaises(TypeError, permutations, 'abc', 's') # r is not an int or None
self.assertEqual(list(permutations(range(3), 2)),
[(0,1), (0,2), (1,0), (1,2), (2,0), (2,1)])
@@ -186,7 +188,7 @@
self.assertEqual(result, list(permutations(values))) # test default r
# Test implementation detail: tuple re-use
-## self.assertEqual(len(set(map(id, permutations('abcde', 3)))), 1)
+ self.assertEqual(len(set(map(id, permutations('abcde', 3)))), 1)
self.assertNotEqual(len(set(map(id, list(permutations('abcde', 3))))), 1)
def test_count(self):
@@ -416,12 +418,46 @@
list(product(*args, **dict(repeat=r))))
self.assertEqual(len(list(product(*[range(7)]*6))), 7**6)
self.assertRaises(TypeError, product, range(6), None)
+
+ def product1(*args, **kwds):
+ pools = list(map(tuple, args)) * kwds.get('repeat', 1)
+ n = len(pools)
+ if n == 0:
+ yield ()
+ return
+ if any(len(pool) == 0 for pool in pools):
+ return
+ indices = [0] * n
+ yield tuple(pool[i] for pool, i in zip(pools, indices))
+ while 1:
+ for i in reversed(range(n)): # right to left
+ if indices[i] == len(pools[i]) - 1:
+ continue
+ indices[i] += 1
+ for j in range(i+1, n):
+ indices[j] = 0
+ yield tuple(pool[i] for pool, i in zip(pools, indices))
+ break
+ else:
+ return
+
+ def product2(*args, **kwds):
+ 'Pure python version used in docs'
+ pools = list(map(tuple, args)) * kwds.get('repeat', 1)
+ result = [[]]
+ for pool in pools:
+ result = [x+[y] for x in result for y in pool]
+ for prod in result:
+ yield tuple(prod)
+
argtypes = ['', 'abc', '', range(0), range(4), dict(a=1, b=2, c=3),
set('abcdefg'), range(11), tuple(range(13))]
for i in range(100):
args = [random.choice(argtypes) for j in range(random.randrange(5))]
expected_len = prod(map(len, args))
self.assertEqual(len(list(product(*args))), expected_len)
+ self.assertEqual(list(product(*args)), list(product1(*args)))
+ self.assertEqual(list(product(*args)), list(product2(*args)))
args = map(iter, args)
self.assertEqual(len(list(product(*args))), expected_len)
@@ -661,6 +697,81 @@
self.assertRaises(StopIteration, next, f(lambda x:x, []))
self.assertRaises(StopIteration, next, f(lambda x:x, StopNow()))
+class TestExamples(unittest.TestCase):
+
+ def test_chain(self):
+ self.assertEqual(''.join(chain('ABC', 'DEF')), 'ABCDEF')
+
+ def test_chain_from_iterable(self):
+ self.assertEqual(''.join(chain.from_iterable(['ABC', 'DEF'])), 'ABCDEF')
+
+ def test_combinations(self):
+ self.assertEqual(list(combinations('ABCD', 2)),
+ [('A','B'), ('A','C'), ('A','D'), ('B','C'), ('B','D'), ('C','D')])
+ self.assertEqual(list(combinations(range(4), 3)),
+ [(0,1,2), (0,1,3), (0,2,3), (1,2,3)])
+
+ def test_count(self):
+ self.assertEqual(list(islice(count(10), 5)), [10, 11, 12, 13, 14])
+
+ def test_cycle(self):
+ self.assertEqual(list(islice(cycle('ABCD'), 12)), list('ABCDABCDABCD'))
+
+ def test_dropwhile(self):
+ self.assertEqual(list(dropwhile(lambda x: x<5, [1,4,6,4,1])), [6,4,1])
+
+ def test_groupby(self):
+ self.assertEqual([k for k, g in groupby('AAAABBBCCDAABBB')],
+ list('ABCDAB'))
+ self.assertEqual([(list(g)) for k, g in groupby('AAAABBBCCD')],
+ [list('AAAA'), list('BBB'), list('CC'), list('D')])
+
+ def test_filter(self):
+ self.assertEqual(list(filter(lambda x: x%2, range(10))), [1,3,5,7,9])
+
+ def test_filterfalse(self):
+ self.assertEqual(list(filterfalse(lambda x: x%2, range(10))), [0,2,4,6,8])
+
+ def test_map(self):
+ self.assertEqual(list(map(pow, (2,3,10), (5,2,3))), [32, 9, 1000])
+
+ def test_islice(self):
+ self.assertEqual(list(islice('ABCDEFG', 2)), list('AB'))
+ self.assertEqual(list(islice('ABCDEFG', 2, 4)), list('CD'))
+ self.assertEqual(list(islice('ABCDEFG', 2, None)), list('CDEFG'))
+ self.assertEqual(list(islice('ABCDEFG', 0, None, 2)), list('ACEG'))
+
+ def test_zip(self):
+ self.assertEqual(list(zip('ABCD', 'xy')), [('A', 'x'), ('B', 'y')])
+
+ def test_zip_longest(self):
+ self.assertEqual(list(zip_longest('ABCD', 'xy', fillvalue='-')),
+ [('A', 'x'), ('B', 'y'), ('C', '-'), ('D', '-')])
+
+ def test_permutations(self):
+ self.assertEqual(list(permutations('ABCD', 2)),
+ list(map(tuple, 'AB AC AD BA BC BD CA CB CD DA DB DC'.split())))
+ self.assertEqual(list(permutations(range(3))),
+ [(0,1,2), (0,2,1), (1,0,2), (1,2,0), (2,0,1), (2,1,0)])
+
+ def test_product(self):
+ self.assertEqual(list(product('ABCD', 'xy')),
+ list(map(tuple, 'Ax Ay Bx By Cx Cy Dx Dy'.split())))
+ self.assertEqual(list(product(range(2), repeat=3)),
+ [(0,0,0), (0,0,1), (0,1,0), (0,1,1),
+ (1,0,0), (1,0,1), (1,1,0), (1,1,1)])
+
+ def test_repeat(self):
+ self.assertEqual(list(repeat(10, 3)), [10, 10, 10])
+
+ def test_stapmap(self):
+ self.assertEqual(list(starmap(pow, [(2,5), (3,2), (10,3)])),
+ [32, 9, 1000])
+
+ def test_takewhile(self):
+ self.assertEqual(list(takewhile(lambda x: x<5, [1,4,6,4,1])), [1,4])
+
+
class TestGC(unittest.TestCase):
def makecycle(self, iterator, container):
@@ -672,6 +783,14 @@
a = []
self.makecycle(chain(a), a)
+ def test_chain_from_iterable(self):
+ a = []
+ self.makecycle(chain.from_iterable([a]), a)
+
+ def test_combinations(self):
+ a = []
+ self.makecycle(combinations([1,2,a,3], 3), a)
+
def test_cycle(self):
a = []
self.makecycle(cycle([a]*2), a)
@@ -684,6 +803,13 @@
a = []
self.makecycle(groupby([a]*2, lambda x:x), a)
+ def test_issue2246(self):
+ # Issue 2246 -- the _grouper iterator was not included in GC
+ n = 10
+ keyfunc = lambda x: x
+ for i, j in groupby(range(n), key=keyfunc):
+ keyfunc.__dict__.setdefault('x',[]).append(j)
+
def test_filter(self):
a = []
self.makecycle(filter(lambda x:True, [a]*2), a)
@@ -696,6 +822,12 @@
a = []
self.makecycle(zip([a]*2, [a]*3), a)
+ def test_zip_longest(self):
+ a = []
+ self.makecycle(zip_longest([a]*2, [a]*3), a)
+ b = [a, None]
+ self.makecycle(zip_longest([a]*2, [a]*3, fillvalue=b), a)
+
def test_map(self):
a = []
self.makecycle(map(lambda x:x, [a]*2), a)
@@ -704,6 +836,14 @@
a = []
self.makecycle(islice([a]*2, None), a)
+ def test_permutations(self):
+ a = []
+ self.makecycle(permutations([1,2,a,3], 3), a)
+
+ def test_product(self):
+ a = []
+ self.makecycle(product([1,2,a,3], repeat=3), a)
+
def test_repeat(self):
a = []
self.makecycle(repeat(a), a)
@@ -1115,7 +1255,7 @@
... return sum(map(operator.mul, vec1, vec2))
>>> def flatten(listOfLists):
-... return list(chain(*listOfLists))
+... return list(chain.from_iterable(listOfLists))
>>> def repeatfunc(func, times=None, *args):
... "Repeat calls to func with specified arguments."
@@ -1134,6 +1274,38 @@
... pass
... return zip(a, b)
+>>> def grouper(n, iterable, fillvalue=None):
+... "grouper(3, 'abcdefg', 'x') --> ('a','b','c'), ('d','e','f'), ('g','x','x')"
+... args = [iter(iterable)] * n
+... kwds = dict(fillvalue=fillvalue)
+... return zip_longest(*args, **kwds)
+
+>>> def roundrobin(*iterables):
+... "roundrobin('abc', 'd', 'ef') --> 'a', 'd', 'e', 'b', 'f', 'c'"
+... # Recipe credited to George Sakkis
+... pending = len(iterables)
+... nexts = cycle(iter(it).__next__ for it in iterables)
+... while pending:
+... try:
+... for next in nexts:
+... yield next()
+... except StopIteration:
+... pending -= 1
+... nexts = cycle(islice(nexts, pending))
+
+>>> def powerset(iterable):
+... "powerset('ab') --> set([]), set(['a']), set(['b']), set(['a', 'b'])"
+... # Recipe credited to Eric Raymond
+... pairs = [(2**i, x) for i, x in enumerate(iterable)]
+... for n in range(2**len(pairs)):
+... yield set(x for m, x in pairs if m&n)
+
+>>> def compress(data, selectors):
+... "compress('abcdef', [1,0,1,0,1,1]) --> a c e f"
+... for d, s in zip(data, selectors):
+... if s:
+... yield d
+
This is not part of the examples but it tests to make sure the definitions
perform as purported.
@@ -1199,6 +1371,18 @@
>>> dotproduct([1,2,3], [4,5,6])
32
+>>> list(grouper(3, 'abcdefg', 'x'))
+[('a', 'b', 'c'), ('d', 'e', 'f'), ('g', 'x', 'x')]
+
+>>> list(roundrobin('abc', 'd', 'ef'))
+['a', 'd', 'e', 'b', 'f', 'c']
+
+>>> list(map(sorted, powerset('ab')))
+[[], ['a'], ['b'], ['a', 'b']]
+
+>>> list(compress('abcdef', [1,0,1,0,1,1]))
+['a', 'c', 'e', 'f']
+
"""
__test__ = {'libreftest' : libreftest}
@@ -1206,7 +1390,7 @@
def test_main(verbose=None):
test_classes = (TestBasicOps, TestVariousIteratorArgs, TestGC,
RegressionTests, LengthTransparency,
- SubclassWithKwargsTest)
+ SubclassWithKwargsTest, TestExamples)
test_support.run_unittest(*test_classes)
# verify reference counting
diff --git a/Lib/test/test_os.py b/Lib/test/test_os.py
index 6cabb82..5f23336 100644
--- a/Lib/test/test_os.py
+++ b/Lib/test/test_os.py
@@ -26,6 +26,114 @@
os.closerange(f, f+2)
self.assertRaises(OSError, os.write, f, "a")
+class TemporaryFileTests(unittest.TestCase):
+ def setUp(self):
+ self.files = []
+ os.mkdir(test_support.TESTFN)
+
+ def tearDown(self):
+ for name in self.files:
+ os.unlink(name)
+ os.rmdir(test_support.TESTFN)
+
+ def check_tempfile(self, name):
+ # make sure it doesn't already exist:
+ self.failIf(os.path.exists(name),
+ "file already exists for temporary file")
+ # make sure we can create the file
+ open(name, "w")
+ self.files.append(name)
+
+ def test_tempnam(self):
+ if not hasattr(os, "tempnam"):
+ return
+ warnings.filterwarnings("ignore", "tempnam", RuntimeWarning,
+ r"test_os$")
+ self.check_tempfile(os.tempnam())
+
+ name = os.tempnam(test_support.TESTFN)
+ self.check_tempfile(name)
+
+ name = os.tempnam(test_support.TESTFN, "pfx")
+ self.assert_(os.path.basename(name)[:3] == "pfx")
+ self.check_tempfile(name)
+
+ def test_tmpfile(self):
+ if not hasattr(os, "tmpfile"):
+ return
+ # As with test_tmpnam() below, the Windows implementation of tmpfile()
+ # attempts to create a file in the root directory of the current drive.
+ # On Vista and Server 2008, this test will always fail for normal users
+ # as writing to the root directory requires elevated privileges. With
+ # XP and below, the semantics of tmpfile() are the same, but the user
+ # running the test is more likely to have administrative privileges on
+ # their account already. If that's the case, then os.tmpfile() should
+ # work. In order to make this test as useful as possible, rather than
+ # trying to detect Windows versions or whether or not the user has the
+ # right permissions, just try and create a file in the root directory
+ # and see if it raises a 'Permission denied' OSError. If it does, then
+ # test that a subsequent call to os.tmpfile() raises the same error. If
+ # it doesn't, assume we're on XP or below and the user running the test
+ # has administrative privileges, and proceed with the test as normal.
+ if sys.platform == 'win32':
+ name = '\\python_test_os_test_tmpfile.txt'
+ if os.path.exists(name):
+ os.remove(name)
+ try:
+ fp = open(name, 'w')
+ except IOError as first:
+ # open() failed, assert tmpfile() fails in the same way.
+ # Although open() raises an IOError and os.tmpfile() raises an
+ # OSError(), 'args' will be (13, 'Permission denied') in both
+ # cases.
+ try:
+ fp = os.tmpfile()
+ except OSError as second:
+ self.assertEqual(first.args, second.args)
+ else:
+ self.fail("expected os.tmpfile() to raise OSError")
+ return
+ else:
+ # open() worked, therefore, tmpfile() should work. Close our
+ # dummy file and proceed with the test as normal.
+ fp.close()
+ os.remove(name)
+
+ fp = os.tmpfile()
+ fp.write("foobar")
+ fp.seek(0,0)
+ s = fp.read()
+ fp.close()
+ self.assert_(s == "foobar")
+
+ def test_tmpnam(self):
+ import sys
+ if not hasattr(os, "tmpnam"):
+ return
+ warnings.filterwarnings("ignore", "tmpnam", RuntimeWarning,
+ r"test_os$")
+ name = os.tmpnam()
+ if sys.platform in ("win32",):
+ # The Windows tmpnam() seems useless. From the MS docs:
+ #
+ # The character string that tmpnam creates consists of
+ # the path prefix, defined by the entry P_tmpdir in the
+ # file STDIO.H, followed by a sequence consisting of the
+ # digit characters '0' through '9'; the numerical value
+ # of this string is in the range 1 - 65,535. Changing the
+ # definitions of L_tmpnam or P_tmpdir in STDIO.H does not
+ # change the operation of tmpnam.
+ #
+ # The really bizarre part is that, at least under MSVC6,
+ # P_tmpdir is "\\". That is, the path returned refers to
+ # the root of the current drive. That's a terrible place to
+ # put temp files, and, depending on privileges, the user
+ # may not even be able to open a file in the root directory.
+ self.failIf(os.path.exists(name),
+ "file already exists for temporary file")
+ else:
+ self.check_tempfile(name)
+
# Test attributes on return values from os.*stat* family.
class StatAttributeTests(unittest.TestCase):
def setUp(self):
diff --git a/Lib/test/test_select.py b/Lib/test/test_select.py
index b45ec7f..f4032d1 100644
--- a/Lib/test/test_select.py
+++ b/Lib/test/test_select.py
@@ -1,70 +1,52 @@
-# Testing select module
-from test.test_support import verbose, reap_children
+from test import test_support
+import unittest
import select
import os
+import sys
-# test some known error conditions
-try:
- rfd, wfd, xfd = select.select(1, 2, 3)
-except TypeError:
- pass
-else:
- print('expected TypeError exception not raised')
+class SelectTestCase(unittest.TestCase):
-class Nope:
- pass
+ class Nope:
+ pass
-class Almost:
- def fileno(self):
- return 'fileno'
+ class Almost:
+ def fileno(self):
+ return 'fileno'
-try:
- rfd, wfd, xfd = select.select([Nope()], [], [])
-except TypeError:
- pass
-else:
- print('expected TypeError exception not raised')
+ def test_error_conditions(self):
+ self.assertRaises(TypeError, select.select, 1, 2, 3)
+ self.assertRaises(TypeError, select.select, [self.Nope()], [], [])
+ self.assertRaises(TypeError, select.select, [self.Almost()], [], [])
+ self.assertRaises(TypeError, select.select, [], [], [], "not a number")
-try:
- rfd, wfd, xfd = select.select([Almost()], [], [])
-except TypeError:
- pass
-else:
- print('expected TypeError exception not raised')
+ def test_select(self):
+ if sys.platform[:3] in ('win', 'mac', 'os2', 'riscos'):
+ if test_support.verbose:
+ print("Can't test select easily on", sys.platform)
+ return
+ cmd = 'for i in 0 1 2 3 4 5 6 7 8 9; do echo testing...; sleep 1; done'
+ p = os.popen(cmd, 'r')
+ for tout in (0, 1, 2, 4, 8, 16) + (None,)*10:
+ if test_support.verbose:
+ print('timeout =', tout)
+ rfd, wfd, xfd = select.select([p], [], [], tout)
+ if (rfd, wfd, xfd) == ([], [], []):
+ continue
+ if (rfd, wfd, xfd) == ([p], [], []):
+ line = p.readline()
+ if test_support.verbose:
+ print(repr(line))
+ if not line:
+ if test_support.verbose:
+ print('EOF')
+ break
+ continue
+ self.fail('Unexpected return values from select():', rfd, wfd, xfd)
+ p.close()
-try:
- rfd, wfd, xfd = select.select([], [], [], 'not a number')
-except TypeError:
- pass
-else:
- print('expected TypeError exception not raised')
+def test_main():
+ test_support.run_unittest(SelectTestCase)
+ test_support.reap_children()
-
-def test():
- import sys
- if sys.platform[:3] in ('win', 'mac', 'os2'):
- if verbose:
- print("Can't test select easily on", sys.platform)
- return
- cmd = 'for i in 0 1 2 3 4 5 6 7 8 9; do echo testing...; sleep 1; done'
- p = os.popen(cmd, 'r')
- for tout in (0, 1, 2, 4, 8, 16) + (None,)*10:
- if verbose:
- print('timeout =', tout)
- rfd, wfd, xfd = select.select([p], [], [], tout)
- if (rfd, wfd, xfd) == ([], [], []):
- continue
- if (rfd, wfd, xfd) == ([p], [], []):
- line = p.readline()
- if verbose:
- print(repr(line))
- if not line:
- if verbose:
- print('EOF')
- break
- continue
- print('Unexpected return values from select():', rfd, wfd, xfd)
- p.close()
- reap_children()
-
-test()
+if __name__ == "__main__":
+ test_main()
diff --git a/Lib/test/test_smtplib.py b/Lib/test/test_smtplib.py
index 5694bb5..a9d5672 100644
--- a/Lib/test/test_smtplib.py
+++ b/Lib/test/test_smtplib.py
@@ -19,7 +19,7 @@
def server(evt, buf):
serv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
- serv.settimeout(1)
+ serv.settimeout(15)
serv.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
serv.bind(("", 0))
global PORT
diff --git a/Lib/test/test_socketserver.py b/Lib/test/test_socketserver.py
index 658056c..7fe746d 100644
--- a/Lib/test/test_socketserver.py
+++ b/Lib/test/test_socketserver.py
@@ -21,13 +21,16 @@
test.test_support.requires("network")
-NREQ = 3
TEST_STR = b"hello world\n"
HOST = "localhost"
HAVE_UNIX_SOCKETS = hasattr(socket, "AF_UNIX")
HAVE_FORKING = hasattr(os, "fork") and os.name != "os2"
+def signal_alarm(n):
+ """Call signal.alarm when it exists (i.e. not on Windows)."""
+ if hasattr(signal, 'alarm'):
+ signal.alarm(n)
def receive(sock, n, timeout=20):
r, w, x = select.select([sock], [], [], timeout)
@@ -46,70 +49,6 @@
pass
-class MyMixinServer:
- def serve_a_few(self):
- for i in range(NREQ):
- self.handle_request()
-
- def handle_error(self, request, client_address):
- self.close_request(request)
- self.server_close()
- raise
-
-def receive(sock, n, timeout=20):
- r, w, x = select.select([sock], [], [], timeout)
- if sock in r:
- return sock.recv(n)
- else:
- raise RuntimeError("timed out on %r" % (sock,))
-
-def testdgram(proto, addr):
- s = socket.socket(proto, socket.SOCK_DGRAM)
- s.sendto(teststring, addr)
- buf = data = receive(s, 100)
- while data and b'\n' not in buf:
- data = receive(s, 100)
- buf += data
- verify(buf == teststring)
- s.close()
-
-def teststream(proto, addr):
- s = socket.socket(proto, socket.SOCK_STREAM)
- s.connect(addr)
- s.sendall(teststring)
- buf = data = receive(s, 100)
- while data and b'\n' not in buf:
- data = receive(s, 100)
- buf += data
- verify(buf == teststring)
- s.close()
-
-class ServerThread(threading.Thread):
- def __init__(self, addr, svrcls, hdlrcls):
- threading.Thread.__init__(self)
- self.__addr = addr
- self.__svrcls = svrcls
- self.__hdlrcls = hdlrcls
- self.ready = threading.Event()
-
- def run(self):
- class svrcls(MyMixinServer, self.__svrcls):
- pass
- if verbose: print("thread: creating server")
- svr = svrcls(self.__addr, self.__hdlrcls)
- # We had the OS pick a port, so pull the real address out of
- # the server.
- self.addr = svr.server_address
- self.port = self.addr[1]
- if self.addr != svr.socket.getsockname():
- raise RuntimeError('server_address was %s, expected %s' %
- (self.addr, svr.socket.getsockname()))
- self.ready.set()
- if verbose: print("thread: serving three times")
- svr.serve_a_few()
- if verbose: print("thread: done")
-
-
@contextlib.contextmanager
def simple_subprocess(testcase):
pid = os.fork()
@@ -126,7 +65,7 @@
"""Test all socket servers."""
def setUp(self):
- signal.alarm(20) # Kill deadlocks after 20 seconds.
+ signal_alarm(20) # Kill deadlocks after 20 seconds.
self.port_seed = 0
self.test_files = []
@@ -139,7 +78,7 @@
except os.error:
pass
self.test_files[:] = []
- signal.alarm(0) # Didn't deadlock.
+ signal_alarm(0) # Didn't deadlock.
def pickaddr(self, proto):
if proto == socket.AF_INET:
@@ -166,29 +105,48 @@
self.test_files.append(fn)
return fn
+ def make_server(self, addr, svrcls, hdlrbase):
+ class MyServer(svrcls):
+ def handle_error(self, request, client_address):
+ self.close_request(request)
+ self.server_close()
+ raise
- def run_server(self, svrcls, hdlrbase, testfunc):
class MyHandler(hdlrbase):
def handle(self):
line = self.rfile.readline()
self.wfile.write(line)
- addr = self.pickaddr(svrcls.address_family)
+ if verbose: print("creating server")
+ server = MyServer(addr, MyHandler)
+ self.assertEquals(server.server_address, server.socket.getsockname())
+ return server
+
+ def run_server(self, svrcls, hdlrbase, testfunc):
+ server = self.make_server(self.pickaddr(svrcls.address_family),
+ svrcls, hdlrbase)
+ # We had the OS pick a port, so pull the real address out of
+ # the server.
+ addr = server.server_address
if verbose:
print("ADDR =", addr)
print("CLASS =", svrcls)
- t = ServerThread(addr, svrcls, MyHandler)
- if verbose: print("server created")
+
+ t = threading.Thread(
+ name='%s serving' % svrcls,
+ target=server.serve_forever,
+ # Short poll interval to make the test finish quickly.
+ # Time between requests is short enough that we won't wake
+ # up spuriously too many times.
+ kwargs={'poll_interval':0.01})
+ t.setDaemon(True) # In case this function raises.
t.start()
if verbose: print("server running")
- t.ready.wait(10)
- self.assert_(t.ready.isSet(),
- "%s not ready within a reasonable time" % svrcls)
- addr = t.addr
- for i in range(NREQ):
+ for i in range(3):
if verbose: print("test client", i)
testfunc(svrcls.address_family, addr)
if verbose: print("waiting for server")
+ server.shutdown()
t.join()
if verbose: print("done")
@@ -295,4 +253,4 @@
if __name__ == "__main__":
test_main()
- signal.alarm(3) # Shutdown shouldn't take more than 3 seconds.
+ signal_alarm(3) # Shutdown shouldn't take more than 3 seconds.
diff --git a/Lib/test/test_ssl.py b/Lib/test/test_ssl.py
index 34bb31a..4e9bfb3 100644
--- a/Lib/test/test_ssl.py
+++ b/Lib/test/test_ssl.py
@@ -368,6 +368,7 @@
# we assume the certfile contains both private key and certificate
self.certfile = certfile
self.active = False
+ self.active_lock = threading.Lock()
self.allow_reuse_address = True
def __str__(self):
@@ -398,23 +399,32 @@
# We want this to run in a thread, so we use a slightly
# modified version of "forever".
self.active = True
- while self.active:
+ while 1:
try:
- self.handle_request()
+ # We need to lock while handling the request.
+ # Another thread can close the socket after self.active
+ # has been checked and before the request is handled.
+ # This causes an exception when using the closed socket.
+ with self.active_lock:
+ if not self.active:
+ break
+ self.handle_request()
except socket.timeout:
pass
except KeyboardInterrupt:
self.server_close()
return
except:
- sys.stdout.write(''.join(traceback.format_exception(*sys.exc_info())));
+ sys.stdout.write(''.join(traceback.format_exception(*sys.exc_info())))
+ break
def server_close(self):
# Again, we want this to run in a thread, so we need to override
# close to clear the "active" flag, so that serve_forever() will
# terminate.
- HTTPServer.server_close(self)
- self.active = False
+ with self.active_lock:
+ HTTPServer.server_close(self)
+ self.active = False
class RootedHTTPRequestHandler(SimpleHTTPRequestHandler):
@@ -749,7 +759,7 @@
not in cert['subject']):
raise test_support.TestFailed(
"Missing or invalid 'organizationName' field in certificate subject; "
- "should be 'Python Software Foundation'.");
+ "should be 'Python Software Foundation'.")
s.close()
finally:
server.stop()
diff --git a/Lib/test/test_strptime.py b/Lib/test/test_strptime.py
index 81f8392..ac8905a 100644
--- a/Lib/test/test_strptime.py
+++ b/Lib/test/test_strptime.py
@@ -208,11 +208,11 @@
def test_ValueError(self):
# Make sure ValueError is raised when match fails or format is bad
- self.assertRaises(ValueError, _strptime.strptime, data_string="%d",
+ self.assertRaises(ValueError, _strptime._strptime_time, data_string="%d",
format="%A")
for bad_format in ("%", "% ", "%e"):
try:
- _strptime.strptime("2005", bad_format)
+ _strptime._strptime_time("2005", bad_format)
except ValueError:
continue
except Exception as err:
@@ -223,12 +223,12 @@
def test_unconverteddata(self):
# Check ValueError is raised when there is unconverted data
- self.assertRaises(ValueError, _strptime.strptime, "10 12", "%m")
+ self.assertRaises(ValueError, _strptime._strptime_time, "10 12", "%m")
def helper(self, directive, position):
"""Helper fxn in testing."""
strf_output = time.strftime("%" + directive, self.time_tuple)
- strp_output = _strptime.strptime(strf_output, "%" + directive)
+ strp_output = _strptime._strptime_time(strf_output, "%" + directive)
self.failUnless(strp_output[position] == self.time_tuple[position],
"testing of '%s' directive failed; '%s' -> %s != %s" %
(directive, strf_output, strp_output[position],
@@ -241,7 +241,7 @@
# Must also make sure %y values are correct for bounds set by Open Group
for century, bounds in ((1900, ('69', '99')), (2000, ('00', '68'))):
for bound in bounds:
- strp_output = _strptime.strptime(bound, '%y')
+ strp_output = _strptime._strptime_time(bound, '%y')
expected_result = century + int(bound)
self.failUnless(strp_output[0] == expected_result,
"'y' test failed; passed in '%s' "
@@ -260,7 +260,7 @@
# Test hour directives
self.helper('H', 3)
strf_output = time.strftime("%I %p", self.time_tuple)
- strp_output = _strptime.strptime(strf_output, "%I %p")
+ strp_output = _strptime._strptime_time(strf_output, "%I %p")
self.failUnless(strp_output[3] == self.time_tuple[3],
"testing of '%%I %%p' directive failed; '%s' -> %s != %s" %
(strf_output, strp_output[3], self.time_tuple[3]))
@@ -273,6 +273,12 @@
# Test second directives
self.helper('S', 5)
+ def test_fraction(self):
+ import datetime
+ now = datetime.datetime.now()
+ tup, frac = _strptime._strptime(str(now), format="%Y-%m-%d %H:%M:%S.%f")
+ self.assertEqual(frac, now.microsecond)
+
def test_weekday(self):
# Test weekday directives
for directive in ('A', 'a', 'w'):
@@ -287,16 +293,16 @@
# When gmtime() is used with %Z, entire result of strftime() is empty.
# Check for equal timezone names deals with bad locale info when this
# occurs; first found in FreeBSD 4.4.
- strp_output = _strptime.strptime("UTC", "%Z")
+ strp_output = _strptime._strptime_time("UTC", "%Z")
self.failUnlessEqual(strp_output.tm_isdst, 0)
- strp_output = _strptime.strptime("GMT", "%Z")
+ strp_output = _strptime._strptime_time("GMT", "%Z")
self.failUnlessEqual(strp_output.tm_isdst, 0)
if sys.platform == "mac":
# Timezones don't really work on MacOS9
return
time_tuple = time.localtime()
strf_output = time.strftime("%Z") #UTC does not have a timezone
- strp_output = _strptime.strptime(strf_output, "%Z")
+ strp_output = _strptime._strptime_time(strf_output, "%Z")
locale_time = _strptime.LocaleTime()
if time.tzname[0] != time.tzname[1] or not time.daylight:
self.failUnless(strp_output[8] == time_tuple[8],
@@ -320,7 +326,7 @@
original_daylight = time.daylight
time.tzname = (tz_name, tz_name)
time.daylight = 1
- tz_value = _strptime.strptime(tz_name, "%Z")[8]
+ tz_value = _strptime._strptime_time(tz_name, "%Z")[8]
self.failUnlessEqual(tz_value, -1,
"%s lead to a timezone value of %s instead of -1 when "
"time.daylight set to %s and passing in %s" %
@@ -347,7 +353,7 @@
def test_percent(self):
# Make sure % signs are handled properly
strf_output = time.strftime("%m %% %Y", self.time_tuple)
- strp_output = _strptime.strptime(strf_output, "%m %% %Y")
+ strp_output = _strptime._strptime_time(strf_output, "%m %% %Y")
self.failUnless(strp_output[0] == self.time_tuple[0] and
strp_output[1] == self.time_tuple[1],
"handling of percent sign failed")
@@ -355,17 +361,17 @@
def test_caseinsensitive(self):
# Should handle names case-insensitively.
strf_output = time.strftime("%B", self.time_tuple)
- self.failUnless(_strptime.strptime(strf_output.upper(), "%B"),
+ self.failUnless(_strptime._strptime_time(strf_output.upper(), "%B"),
"strptime does not handle ALL-CAPS names properly")
- self.failUnless(_strptime.strptime(strf_output.lower(), "%B"),
+ self.failUnless(_strptime._strptime_time(strf_output.lower(), "%B"),
"strptime does not handle lowercase names properly")
- self.failUnless(_strptime.strptime(strf_output.capitalize(), "%B"),
+ self.failUnless(_strptime._strptime_time(strf_output.capitalize(), "%B"),
"strptime does not handle capword names properly")
def test_defaults(self):
# Default return value should be (1900, 1, 1, 0, 0, 0, 0, 1, 0)
defaults = (1900, 1, 1, 0, 0, 0, 0, 1, -1)
- strp_output = _strptime.strptime('1', '%m')
+ strp_output = _strptime._strptime_time('1', '%m')
self.failUnless(strp_output == defaults,
"Default values for strptime() are incorrect;"
" %s != %s" % (strp_output, defaults))
@@ -377,7 +383,7 @@
# escaped.
# Test instigated by bug #796149 .
need_escaping = ".^$*+?{}\[]|)("
- self.failUnless(_strptime.strptime(need_escaping, need_escaping))
+ self.failUnless(_strptime._strptime_time(need_escaping, need_escaping))
class Strptime12AMPMTests(unittest.TestCase):
"""Test a _strptime regression in '%I %p' at 12 noon (12 PM)"""
@@ -386,8 +392,8 @@
eq = self.assertEqual
eq(time.strptime('12 PM', '%I %p')[3], 12)
eq(time.strptime('12 AM', '%I %p')[3], 0)
- eq(_strptime.strptime('12 PM', '%I %p')[3], 12)
- eq(_strptime.strptime('12 AM', '%I %p')[3], 0)
+ eq(_strptime._strptime_time('12 PM', '%I %p')[3], 12)
+ eq(_strptime._strptime_time('12 AM', '%I %p')[3], 0)
class JulianTests(unittest.TestCase):
@@ -397,7 +403,7 @@
eq = self.assertEqual
for i in range(1, 367):
# use 2004, since it is a leap year, we have 366 days
- eq(_strptime.strptime('%d 2004' % i, '%j %Y')[7], i)
+ eq(_strptime._strptime_time('%d 2004' % i, '%j %Y')[7], i)
class CalculationTests(unittest.TestCase):
"""Test that strptime() fills in missing info correctly"""
@@ -408,7 +414,7 @@
def test_julian_calculation(self):
# Make sure that when Julian is missing that it is calculated
format_string = "%Y %m %d %H %M %S %w %Z"
- result = _strptime.strptime(time.strftime(format_string, self.time_tuple),
+ result = _strptime._strptime_time(time.strftime(format_string, self.time_tuple),
format_string)
self.failUnless(result.tm_yday == self.time_tuple.tm_yday,
"Calculation of tm_yday failed; %s != %s" %
@@ -417,7 +423,7 @@
def test_gregorian_calculation(self):
# Test that Gregorian date can be calculated from Julian day
format_string = "%Y %H %M %S %w %j %Z"
- result = _strptime.strptime(time.strftime(format_string, self.time_tuple),
+ result = _strptime._strptime_time(time.strftime(format_string, self.time_tuple),
format_string)
self.failUnless(result.tm_year == self.time_tuple.tm_year and
result.tm_mon == self.time_tuple.tm_mon and
@@ -431,7 +437,7 @@
def test_day_of_week_calculation(self):
# Test that the day of the week is calculated as needed
format_string = "%Y %m %d %H %S %j %Z"
- result = _strptime.strptime(time.strftime(format_string, self.time_tuple),
+ result = _strptime._strptime_time(time.strftime(format_string, self.time_tuple),
format_string)
self.failUnless(result.tm_wday == self.time_tuple.tm_wday,
"Calculation of day of the week failed;"
@@ -445,7 +451,7 @@
format_string = "%%Y %%%s %%w" % directive
dt_date = datetime_date(*ymd_tuple)
strp_input = dt_date.strftime(format_string)
- strp_output = _strptime.strptime(strp_input, format_string)
+ strp_output = _strptime._strptime_time(strp_input, format_string)
self.failUnless(strp_output[:3] == ymd_tuple,
"%s(%s) test failed w/ '%s': %s != %s (%s != %s)" %
(test_reason, directive, strp_input,
@@ -484,11 +490,11 @@
def test_time_re_recreation(self):
# Make sure cache is recreated when current locale does not match what
# cached object was created with.
- _strptime.strptime("10", "%d")
- _strptime.strptime("2005", "%Y")
+ _strptime._strptime_time("10", "%d")
+ _strptime._strptime_time("2005", "%Y")
_strptime._TimeRE_cache.locale_time.lang = "Ni"
original_time_re = id(_strptime._TimeRE_cache)
- _strptime.strptime("10", "%d")
+ _strptime._strptime_time("10", "%d")
self.failIfEqual(original_time_re, id(_strptime._TimeRE_cache))
self.failUnlessEqual(len(_strptime._regex_cache), 1)
@@ -502,7 +508,7 @@
while len(_strptime._regex_cache) <= _strptime._CACHE_MAX_SIZE:
_strptime._regex_cache[bogus_key] = None
bogus_key += 1
- _strptime.strptime("10", "%d")
+ _strptime._strptime_time("10", "%d")
self.failUnlessEqual(len(_strptime._regex_cache), 1)
def test_new_localetime(self):
@@ -510,7 +516,7 @@
# is created.
locale_time_id = id(_strptime._TimeRE_cache.locale_time)
_strptime._TimeRE_cache.locale_time.lang = "Ni"
- _strptime.strptime("10", "%d")
+ _strptime._strptime_time("10", "%d")
self.failIfEqual(locale_time_id,
id(_strptime._TimeRE_cache.locale_time))
@@ -522,13 +528,13 @@
except locale.Error:
return
try:
- _strptime.strptime('10', '%d')
+ _strptime._strptime_time('10', '%d')
# Get id of current cache object.
first_time_re_id = id(_strptime._TimeRE_cache)
try:
# Change the locale and force a recreation of the cache.
locale.setlocale(locale.LC_TIME, ('de_DE', 'UTF8'))
- _strptime.strptime('10', '%d')
+ _strptime._strptime_time('10', '%d')
# Get the new cache object's id.
second_time_re_id = id(_strptime._TimeRE_cache)
# They should not be equal.
diff --git a/Lib/test/test_struct.py b/Lib/test/test_struct.py
index 23358be..a815555 100644
--- a/Lib/test/test_struct.py
+++ b/Lib/test/test_struct.py
@@ -84,8 +84,8 @@
if sz * 3 != struct.calcsize('iii'):
raise TestFailed('inconsistent sizes')
-fmt = 'cbxxxxxxhhhhiillffdt'
-fmt3 = '3c3b18x12h6i6l6f3d3t'
+fmt = 'cbxxxxxxhhhhiillffd?'
+fmt3 = '3c3b18x12h6i6l6f3d3?'
sz = struct.calcsize(fmt)
sz3 = struct.calcsize(fmt3)
if sz * 3 != sz3:
@@ -111,7 +111,7 @@
t = True
for prefix in ('', '@', '<', '>', '=', '!'):
- for format in ('xcbhilfdt', 'xcBHILfdt'):
+ for format in ('xcbhilfd?', 'xcBHILfd?'):
format = prefix + format
if verbose:
print("trying:", format)
@@ -160,11 +160,11 @@
('f', -2.0, '\300\000\000\000', '\000\000\000\300', 0),
('d', -2.0, '\300\000\000\000\000\000\000\000',
'\000\000\000\000\000\000\000\300', 0),
- ('t', 0, '\0', '\0', 0),
- ('t', 3, '\1', '\1', 1),
- ('t', True, '\1', '\1', 0),
- ('t', [], '\0', '\0', 1),
- ('t', (1,), '\1', '\1', 1),
+ ('?', 0, '\0', '\0', 0),
+ ('?', 3, '\1', '\1', 1),
+ ('?', True, '\1', '\1', 0),
+ ('?', [], '\0', '\0', 1),
+ ('?', (1,), '\1', '\1', 1),
]
for fmt, arg, big, lil, asy in tests:
@@ -490,7 +490,7 @@
except OverflowError:
pass
else:
- TestFailed("expected OverflowError")
+ raise TestFailed("expected OverflowError")
test_705836()
@@ -646,13 +646,13 @@
false = (), [], [], '', 0
true = [1], 'test', 5, -1, 0xffffffff+1, 0xffffffff/2
- falseFormat = prefix + 't' * len(false)
+ falseFormat = prefix + '?' * len(false)
if verbose:
print('trying bool pack/unpack on', false, 'using format', falseFormat)
packedFalse = struct.pack(falseFormat, *false)
unpackedFalse = struct.unpack(falseFormat, packedFalse)
- trueFormat = prefix + 't' * len(true)
+ trueFormat = prefix + '?' * len(true)
if verbose:
print('trying bool pack/unpack on', true, 'using format', trueFormat)
packedTrue = struct.pack(trueFormat, *true)
@@ -671,10 +671,10 @@
raise TestFailed('%r did not unpack as false' % t)
if prefix and verbose:
- print('trying size of bool with format %r' % (prefix+'t'))
- packed = struct.pack(prefix+'t', 1)
+ print('trying size of bool with format %r' % (prefix+'?'))
+ packed = struct.pack(prefix+'?', 1)
- if len(packed) != struct.calcsize(prefix+'t'):
+ if len(packed) != struct.calcsize(prefix+'?'):
raise TestFailed('packed length is not equal to calculated size')
if len(packed) != 1 and prefix:
@@ -683,7 +683,7 @@
print('size of bool in native format is %i' % (len(packed)))
for c in b'\x01\x7f\xff\x0f\xf0':
- if struct.unpack('>t', bytes([c]))[0] is not True:
+ if struct.unpack('>?', c)[0] is not True:
raise TestFailed('%c did not unpack as True' % c)
test_bool()
diff --git a/Lib/test/test_thread.py b/Lib/test/test_thread.py
index 577d4cb..c89c5a1 100644
--- a/Lib/test/test_thread.py
+++ b/Lib/test/test_thread.py
@@ -1,160 +1,161 @@
-# Very rudimentary test of thread module
-
-# Create a bunch of threads, let each do some work, wait until all are done
-
-from test.test_support import verbose
+import os
+import unittest
import random
+from test import test_support
import thread
import time
-mutex = thread.allocate_lock()
-rmutex = thread.allocate_lock() # for calls to random
-running = 0
-done = thread.allocate_lock()
-done.acquire()
-numtasks = 10
+NUMTASKS = 10
+NUMTRIPS = 3
-def task(ident):
- global running
- rmutex.acquire()
- delay = random.random() * numtasks
- rmutex.release()
- if verbose:
- print('task', ident, 'will run for', round(delay, 1), 'sec')
- time.sleep(delay)
- if verbose:
- print('task', ident, 'done')
- mutex.acquire()
- running = running - 1
- if running == 0:
- done.release()
- mutex.release()
+def verbose_print(arg):
+ """Helper function for printing out debugging output."""
+ if test_support.verbose:
+ print(arg)
-next_ident = 0
-def newtask():
- global next_ident, running
- mutex.acquire()
- next_ident = next_ident + 1
- if verbose:
- print('creating task', next_ident)
- thread.start_new_thread(task, (next_ident,))
- running = running + 1
- mutex.release()
+class BasicThreadTest(unittest.TestCase):
-for i in range(numtasks):
- newtask()
+ def setUp(self):
+ self.done_mutex = thread.allocate_lock()
+ self.done_mutex.acquire()
+ self.running_mutex = thread.allocate_lock()
+ self.random_mutex = thread.allocate_lock()
+ self.running = 0
+ self.next_ident = 0
-print('waiting for all tasks to complete')
-done.acquire()
-print('all tasks done')
-class barrier:
- def __init__(self, n):
- self.n = n
+class ThreadRunningTests(BasicThreadTest):
+
+ def newtask(self):
+ with self.running_mutex:
+ self.next_ident += 1
+ verbose_print("creating task %s" % self.next_ident)
+ thread.start_new_thread(self.task, (self.next_ident,))
+ self.running += 1
+
+ def task(self, ident):
+ with self.random_mutex:
+ delay = random.random() * NUMTASKS
+ verbose_print("task %s will run for %s" % (ident, round(delay, 1)))
+ time.sleep(delay)
+ verbose_print("task %s done" % ident)
+ with self.running_mutex:
+ self.running -= 1
+ if self.running == 0:
+ self.done_mutex.release()
+
+ def test_starting_threads(self):
+ # Basic test for thread creation.
+ for i in range(NUMTASKS):
+ self.newtask()
+ verbose_print("waiting for tasks to complete...")
+ self.done_mutex.acquire()
+ verbose_print("all tasks done")
+
+ def test_stack_size(self):
+ # Various stack size tests.
+ self.assertEquals(thread.stack_size(), 0, "intial stack size is not 0")
+
+ thread.stack_size(0)
+ self.assertEquals(thread.stack_size(), 0, "stack_size not reset to default")
+
+ if os.name not in ("nt", "os2", "posix"):
+ return
+
+ tss_supported = True
+ try:
+ thread.stack_size(4096)
+ except ValueError:
+ verbose_print("caught expected ValueError setting "
+ "stack_size(4096)")
+ except thread.error:
+ tss_supported = False
+ verbose_print("platform does not support changing thread stack "
+ "size")
+
+ if tss_supported:
+ fail_msg = "stack_size(%d) failed - should succeed"
+ for tss in (262144, 0x100000, 0):
+ thread.stack_size(tss)
+ self.assertEquals(thread.stack_size(), tss, fail_msg % tss)
+ verbose_print("successfully set stack_size(%d)" % tss)
+
+ for tss in (262144, 0x100000):
+ verbose_print("trying stack_size = (%d)" % tss)
+ self.next_ident = 0
+ for i in range(NUMTASKS):
+ self.newtask()
+
+ verbose_print("waiting for all tasks to complete")
+ self.done_mutex.acquire()
+ verbose_print("all tasks done")
+
+ thread.stack_size(0)
+
+
+class Barrier:
+ def __init__(self, num_threads):
+ self.num_threads = num_threads
self.waiting = 0
- self.checkin = thread.allocate_lock()
- self.checkout = thread.allocate_lock()
- self.checkout.acquire()
+ self.checkin_mutex = thread.allocate_lock()
+ self.checkout_mutex = thread.allocate_lock()
+ self.checkout_mutex.acquire()
def enter(self):
- checkin, checkout = self.checkin, self.checkout
-
- checkin.acquire()
+ self.checkin_mutex.acquire()
self.waiting = self.waiting + 1
- if self.waiting == self.n:
- self.waiting = self.n - 1
- checkout.release()
+ if self.waiting == self.num_threads:
+ self.waiting = self.num_threads - 1
+ self.checkout_mutex.release()
return
- checkin.release()
+ self.checkin_mutex.release()
- checkout.acquire()
+ self.checkout_mutex.acquire()
self.waiting = self.waiting - 1
if self.waiting == 0:
- checkin.release()
+ self.checkin_mutex.release()
return
- checkout.release()
+ self.checkout_mutex.release()
-numtrips = 3
-def task2(ident):
- global running
- for i in range(numtrips):
- if ident == 0:
- # give it a good chance to enter the next
- # barrier before the others are all out
- # of the current one
- delay = 0.001
- else:
- rmutex.acquire()
- delay = random.random() * numtasks
- rmutex.release()
- if verbose:
- print('task', ident, 'will run for', round(delay, 1), 'sec')
- time.sleep(delay)
- if verbose:
- print('task', ident, 'entering barrier', i)
- bar.enter()
- if verbose:
- print('task', ident, 'leaving barrier', i)
- mutex.acquire()
- running -= 1
- # Must release mutex before releasing done, else the main thread can
- # exit and set mutex to None as part of global teardown; then
- # mutex.release() raises AttributeError.
- finished = running == 0
- mutex.release()
- if finished:
- done.release()
-print('\n*** Barrier Test ***')
-if done.acquire(0):
- raise ValueError("'done' should have remained acquired")
-bar = barrier(numtasks)
-running = numtasks
-for i in range(numtasks):
- thread.start_new_thread(task2, (i,))
-done.acquire()
-print('all tasks done')
+class BarrierTest(BasicThreadTest):
-# not all platforms support changing thread stack size
-print('\n*** Changing thread stack size ***')
-if thread.stack_size() != 0:
- raise ValueError("initial stack_size not 0")
+ def test_barrier(self):
+ self.bar = Barrier(NUMTASKS)
+ self.running = NUMTASKS
+ for i in range(NUMTASKS):
+ thread.start_new_thread(self.task2, (i,))
+ verbose_print("waiting for tasks to end")
+ self.done_mutex.acquire()
+ verbose_print("tasks done")
-thread.stack_size(0)
-if thread.stack_size() != 0:
- raise ValueError("stack_size not reset to default")
+ def task2(self, ident):
+ for i in range(NUMTRIPS):
+ if ident == 0:
+ # give it a good chance to enter the next
+ # barrier before the others are all out
+ # of the current one
+ delay = 0.001
+ else:
+ with self.random_mutex:
+ delay = random.random() * NUMTASKS
+ verbose_print("task %s will run for %s" % (ident, round(delay, 1)))
+ time.sleep(delay)
+ verbose_print("task %s entering %s" % (ident, i))
+ self.bar.enter()
+ verbose_print("task %s leaving barrier" % ident)
+ with self.running_mutex:
+ self.running -= 1
+ # Must release mutex before releasing done, else the main thread can
+ # exit and set mutex to None as part of global teardown; then
+ # mutex.release() raises AttributeError.
+ finished = self.running == 0
+ if finished:
+ self.done_mutex.release()
-from os import name as os_name
-if os_name in ("nt", "os2", "posix"):
+def test_main():
+ test_support.run_unittest(ThreadRunningTests, BarrierTest)
- tss_supported = 1
- try:
- thread.stack_size(4096)
- except ValueError:
- print('caught expected ValueError setting stack_size(4096)')
- except thread.error:
- tss_supported = 0
- print('platform does not support changing thread stack size')
-
- if tss_supported:
- failed = lambda s, e: s != e
- fail_msg = "stack_size(%d) failed - should succeed"
- for tss in (262144, 0x100000, 0):
- thread.stack_size(tss)
- if failed(thread.stack_size(), tss):
- raise ValueError(fail_msg % tss)
- print('successfully set stack_size(%d)' % tss)
-
- for tss in (262144, 0x100000):
- print('trying stack_size = %d' % tss)
- next_ident = 0
- for i in range(numtasks):
- newtask()
-
- print('waiting for all tasks to complete')
- done.acquire()
- print('all tasks done')
-
- # reset stack size to default
- thread.stack_size(0)
+if __name__ == "__main__":
+ test_main()
diff --git a/Lib/test/test_tokenize.py b/Lib/test/test_tokenize.py
index e59d9c6..2ed723b 100644
--- a/Lib/test/test_tokenize.py
+++ b/Lib/test/test_tokenize.py
@@ -1,126 +1,501 @@
-"""Tests for the tokenize module.
+doctests = """
+Tests for the tokenize module.
-The tests were originally written in the old Python style, where the
-test output was compared to a golden file. This docstring represents
-the first steps towards rewriting the entire test as a doctest.
+ >>> import glob, random, sys
-The tests can be really simple. Given a small fragment of source
-code, print out a table with the tokens. The ENDMARK is omitted for
+The tests can be really simple. Given a small fragment of source
+code, print out a table with thokens. The ENDMARK is omitted for
brevity.
->>> dump_tokens("1 + 1")
-NUMBER '1' (1, 0) (1, 1)
-OP '+' (1, 2) (1, 3)
-NUMBER '1' (1, 4) (1, 5)
+ >>> dump_tokens("1 + 1")
+ NUMBER '1' (1, 0) (1, 1)
+ OP '+' (1, 2) (1, 3)
+ NUMBER '1' (1, 4) (1, 5)
-A comment generates a token here, unlike in the parser module. The
-comment token is followed by an NL or a NEWLINE token, depending on
-whether the line contains the completion of a statement.
+ >>> dump_tokens("if False:\\n"
+ ... " # NL\\n"
+ ... " True = False # NEWLINE\\n")
+ NAME 'if' (1, 0) (1, 2)
+ NAME 'False' (1, 3) (1, 8)
+ OP ':' (1, 8) (1, 9)
+ NEWLINE '\\n' (1, 9) (1, 10)
+ COMMENT '# NL' (2, 4) (2, 8)
+ NL '\\n' (2, 8) (2, 9)
+ INDENT ' ' (3, 0) (3, 4)
+ NAME 'True' (3, 4) (3, 8)
+ OP '=' (3, 9) (3, 10)
+ NAME 'False' (3, 11) (3, 16)
+ COMMENT '# NEWLINE' (3, 17) (3, 26)
+ NEWLINE '\\n' (3, 26) (3, 27)
+ DEDENT '' (4, 0) (4, 0)
->>> dump_tokens("if False:\\n"
-... " # NL\\n"
-... " a = False # NEWLINE\\n")
-NAME 'if' (1, 0) (1, 2)
-NAME 'False' (1, 3) (1, 8)
-OP ':' (1, 8) (1, 9)
-NEWLINE '\\n' (1, 9) (1, 10)
-COMMENT '# NL' (2, 4) (2, 8)
-NL '\\n' (2, 8) (2, 9)
-INDENT ' ' (3, 0) (3, 4)
-NAME 'a' (3, 4) (3, 5)
-OP '=' (3, 9) (3, 10)
-NAME 'False' (3, 11) (3, 16)
-COMMENT '# NEWLINE' (3, 17) (3, 26)
-NEWLINE '\\n' (3, 26) (3, 27)
-DEDENT '' (4, 0) (4, 0)
+ >>> indent_error_file = \"""
+ ... def k(x):
+ ... x += 2
+ ... x += 5
+ ... \"""
+ >>> for tok in generate_tokens(StringIO(indent_error_file).readline): pass
+ Traceback (most recent call last):
+ ...
+ IndentationError: unindent does not match any outer indentation level
-' # Emacs hint
+Test roundtrip for `untokenize`. `f` is an open file or a string. The source
+code in f is tokenized, converted back to source code via tokenize.untokenize(),
+and tokenized again from the latter. The test fails if the second tokenization
+doesn't match the first.
-There will be a bunch more tests of specific source patterns.
+ >>> def roundtrip(f):
+ ... if isinstance(f, str): f = StringIO(f)
+ ... token_list = list(generate_tokens(f.readline))
+ ... f.close()
+ ... tokens1 = [tok[:2] for tok in token_list]
+ ... new_text = untokenize(tokens1)
+ ... readline = iter(new_text.splitlines(1)).__next__
+ ... tokens2 = [tok[:2] for tok in generate_tokens(readline)]
+ ... return tokens1 == tokens2
+ ...
-The tokenize module also defines an untokenize function that should
-regenerate the original program text from the tokens.
+There are some standard formattig practises that are easy to get right.
-There are some standard formatting practices that are easy to get right.
+ >>> roundtrip("if x == 1:\\n"
+ ... " print(x)\\n")
+ True
->>> roundtrip("if x == 1:\\n"
-... " print(x)\\n")
-if x == 1:
- print(x)
+ >>> roundtrip("# This is a comment\\n# This also")
+ True
Some people use different formatting conventions, which makes
-untokenize a little trickier. Note that this test involves trailing
-whitespace after the colon. Note that we use hex escapes to make the
-two trailing blanks apparent in the expected output.
+untokenize a little trickier. Note that this test involves trailing
+whitespace after the colon. Note that we use hex escapes to make the
+two trailing blanks apperant in the expected output.
->>> roundtrip("if x == 1 : \\n"
-... " print(x)\\n")
-if x == 1 :\x20\x20
- print(x)
+ >>> roundtrip("if x == 1 : \\n"
+ ... " print(x)\\n")
+ True
-Comments need to go in the right place.
+ >>> f = test_support.findfile("tokenize_tests.txt")
+ >>> roundtrip(open(f))
+ True
->>> roundtrip("if x == 1:\\n"
-... " # A comment by itself.\\n"
-... " print(x) # Comment here, too.\\n"
-... " # Another comment.\\n"
-... "after_if = True\\n")
-if x == 1:
- # A comment by itself.
- print(x) # Comment here, too.
- # Another comment.
-after_if = True
+ >>> roundtrip("if x == 1:\\n"
+ ... " # A comment by itself.\\n"
+ ... " print(x) # Comment here, too.\\n"
+ ... " # Another comment.\\n"
+ ... "after_if = True\\n")
+ True
->>> roundtrip("if (x # The comments need to go in the right place\\n"
-... " == 1):\\n"
-... " print('x == 1')\\n")
-if (x # The comments need to go in the right place
- == 1):
- print('x == 1')
+ >>> roundtrip("if (x # The comments need to go in the right place\\n"
+ ... " == 1):\\n"
+ ... " print('x==1')\\n")
+ True
+ >>> roundtrip("class Test: # A comment here\\n"
+ ... " # A comment with weird indent\\n"
+ ... " after_com = 5\\n"
+ ... " def x(m): return m*5 # a one liner\\n"
+ ... " def y(m): # A whitespace after the colon\\n"
+ ... " return y*4 # 3-space indent\\n")
+ True
+
+Some error-handling code
+
+ >>> roundtrip("try: import somemodule\\n"
+ ... "except ImportError: # comment\\n"
+ ... " print 'Can not import' # comment2\\n"
+ ... "else: print 'Loaded'\\n")
+ True
+
+Balancing contunuation
+
+ >>> roundtrip("a = (3,4, \\n"
+ ... "5,6)\\n"
+ ... "y = [3, 4,\\n"
+ ... "5]\\n"
+ ... "z = {'a': 5,\\n"
+ ... "'b':15, 'c':True}\\n"
+ ... "x = len(y) + 5 - a[\\n"
+ ... "3] - a[2]\\n"
+ ... "+ len(z) - z[\\n"
+ ... "'b']\\n")
+ True
+
+Ordinary integers and binary operators
+
+ >>> dump_tokens("0xff <= 255")
+ NUMBER '0xff' (1, 0) (1, 4)
+ OP '<=' (1, 5) (1, 7)
+ NUMBER '255' (1, 8) (1, 11)
+ >>> dump_tokens("01234567 > ~0x15")
+ NUMBER '01234567' (1, 0) (1, 8)
+ OP '>' (1, 9) (1, 10)
+ OP '~' (1, 11) (1, 12)
+ NUMBER '0x15' (1, 12) (1, 16)
+ >>> dump_tokens("2134568 != 01231515")
+ NUMBER '2134568' (1, 0) (1, 7)
+ OP '!=' (1, 8) (1, 10)
+ NUMBER '01231515' (1, 11) (1, 19)
+ >>> dump_tokens("(-124561-1) & 0200000000")
+ OP '(' (1, 0) (1, 1)
+ OP '-' (1, 1) (1, 2)
+ NUMBER '124561' (1, 2) (1, 8)
+ OP '-' (1, 8) (1, 9)
+ NUMBER '1' (1, 9) (1, 10)
+ OP ')' (1, 10) (1, 11)
+ OP '&' (1, 12) (1, 13)
+ NUMBER '0200000000' (1, 14) (1, 24)
+ >>> dump_tokens("0xdeadbeef != -1")
+ NUMBER '0xdeadbeef' (1, 0) (1, 10)
+ OP '!=' (1, 11) (1, 13)
+ OP '-' (1, 14) (1, 15)
+ NUMBER '1' (1, 15) (1, 16)
+ >>> dump_tokens("0xdeadc0de & 012345")
+ NUMBER '0xdeadc0de' (1, 0) (1, 10)
+ OP '&' (1, 11) (1, 12)
+ NUMBER '012345' (1, 13) (1, 19)
+ >>> dump_tokens("0xFF & 0x15 | 1234")
+ NUMBER '0xFF' (1, 0) (1, 4)
+ OP '&' (1, 5) (1, 6)
+ NUMBER '0x15' (1, 7) (1, 11)
+ OP '|' (1, 12) (1, 13)
+ NUMBER '1234' (1, 14) (1, 18)
+
+Long integers
+
+ >>> dump_tokens("x = 0L")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '0L' (1, 4) (1, 6)
+ >>> dump_tokens("x = 0xfffffffffff")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '0xffffffffff (1, 4) (1, 17)
+ >>> dump_tokens("x = 123141242151251616110l")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '123141242151 (1, 4) (1, 26)
+ >>> dump_tokens("x = -15921590215012591L")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ OP '-' (1, 4) (1, 5)
+ NUMBER '159215902150 (1, 5) (1, 23)
+
+Floating point numbers
+
+ >>> dump_tokens("x = 3.14159")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '3.14159' (1, 4) (1, 11)
+ >>> dump_tokens("x = 314159.")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '314159.' (1, 4) (1, 11)
+ >>> dump_tokens("x = .314159")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '.314159' (1, 4) (1, 11)
+ >>> dump_tokens("x = 3e14159")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '3e14159' (1, 4) (1, 11)
+ >>> dump_tokens("x = 3E123")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '3E123' (1, 4) (1, 9)
+ >>> dump_tokens("x+y = 3e-1230")
+ NAME 'x' (1, 0) (1, 1)
+ OP '+' (1, 1) (1, 2)
+ NAME 'y' (1, 2) (1, 3)
+ OP '=' (1, 4) (1, 5)
+ NUMBER '3e-1230' (1, 6) (1, 13)
+ >>> dump_tokens("x = 3.14e159")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '3.14e159' (1, 4) (1, 12)
+
+String literals
+
+ >>> dump_tokens("x = ''; y = \\\"\\\"")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ STRING "''" (1, 4) (1, 6)
+ OP ';' (1, 6) (1, 7)
+ NAME 'y' (1, 8) (1, 9)
+ OP '=' (1, 10) (1, 11)
+ STRING '""' (1, 12) (1, 14)
+ >>> dump_tokens("x = '\\\"'; y = \\\"'\\\"")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ STRING '\\'"\\'' (1, 4) (1, 7)
+ OP ';' (1, 7) (1, 8)
+ NAME 'y' (1, 9) (1, 10)
+ OP '=' (1, 11) (1, 12)
+ STRING '"\\'"' (1, 13) (1, 16)
+ >>> dump_tokens("x = \\\"doesn't \\\"shrink\\\", does it\\\"")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ STRING '"doesn\\'t "' (1, 4) (1, 14)
+ NAME 'shrink' (1, 14) (1, 20)
+ STRING '", does it"' (1, 20) (1, 31)
+ >>> dump_tokens("x = u'abc' + U'ABC'")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ STRING "u'abc'" (1, 4) (1, 10)
+ OP '+' (1, 11) (1, 12)
+ STRING "U'ABC'" (1, 13) (1, 19)
+ >>> dump_tokens('y = "ABC" + "ABC"')
+ NAME 'y' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ STRING '"ABC"' (1, 4) (1, 10)
+ OP '+' (1, 11) (1, 12)
+ STRING '"ABC"' (1, 13) (1, 19)
+ >>> dump_tokens("x = r'abc' + r'ABC' + R'ABC' + R'ABC'")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ STRING "r'abc'" (1, 4) (1, 11)
+ OP '+' (1, 12) (1, 13)
+ STRING "r'ABC'" (1, 14) (1, 21)
+ OP '+' (1, 22) (1, 23)
+ STRING "R'ABC'" (1, 24) (1, 31)
+ OP '+' (1, 32) (1, 33)
+ STRING "R'ABC'" (1, 34) (1, 41)
+ >>> dump_tokens('y = r"abc" + r"ABC" + R"ABC" + R"ABC"')
+ NAME 'y' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ STRING 'r"abc"' (1, 4) (1, 11)
+ OP '+' (1, 12) (1, 13)
+ STRING 'r"ABC"' (1, 14) (1, 21)
+ OP '+' (1, 22) (1, 23)
+ STRING 'R"ABC"' (1, 24) (1, 31)
+ OP '+' (1, 32) (1, 33)
+ STRING 'R"ABC"' (1, 34) (1, 41)
+
+Operators
+
+ >>> dump_tokens("def d22(a, b, c=2, d=2, *k): pass")
+ NAME 'def' (1, 0) (1, 3)
+ NAME 'd22' (1, 4) (1, 7)
+ OP '(' (1, 7) (1, 8)
+ NAME 'a' (1, 8) (1, 9)
+ OP ',' (1, 9) (1, 10)
+ NAME 'b' (1, 11) (1, 12)
+ OP ',' (1, 12) (1, 13)
+ NAME 'c' (1, 14) (1, 15)
+ OP '=' (1, 15) (1, 16)
+ NUMBER '2' (1, 16) (1, 17)
+ OP ',' (1, 17) (1, 18)
+ NAME 'd' (1, 19) (1, 20)
+ OP '=' (1, 20) (1, 21)
+ NUMBER '2' (1, 21) (1, 22)
+ OP ',' (1, 22) (1, 23)
+ OP '*' (1, 24) (1, 25)
+ NAME 'k' (1, 25) (1, 26)
+ OP ')' (1, 26) (1, 27)
+ OP ':' (1, 27) (1, 28)
+ NAME 'pass' (1, 29) (1, 33)
+ >>> dump_tokens("def d01v_(a=1, *k, **w): pass")
+ NAME 'def' (1, 0) (1, 3)
+ NAME 'd01v_' (1, 4) (1, 9)
+ OP '(' (1, 9) (1, 10)
+ NAME 'a' (1, 10) (1, 11)
+ OP '=' (1, 11) (1, 12)
+ NUMBER '1' (1, 12) (1, 13)
+ OP ',' (1, 13) (1, 14)
+ OP '*' (1, 15) (1, 16)
+ NAME 'k' (1, 16) (1, 17)
+ OP ',' (1, 17) (1, 18)
+ OP '**' (1, 19) (1, 21)
+ NAME 'w' (1, 21) (1, 22)
+ OP ')' (1, 22) (1, 23)
+ OP ':' (1, 23) (1, 24)
+ NAME 'pass' (1, 25) (1, 29)
+
+Comparison
+
+ >>> dump_tokens("if 1 < 1 > 1 == 1 >= 5 <= 0x15 <= 0x12 != " +
+ ... "1 and 5 in 1 not in 1 is 1 or 5 is not 1: pass")
+ NAME 'if' (1, 0) (1, 2)
+ NUMBER '1' (1, 3) (1, 4)
+ OP '<' (1, 5) (1, 6)
+ NUMBER '1' (1, 7) (1, 8)
+ OP '>' (1, 9) (1, 10)
+ NUMBER '1' (1, 11) (1, 12)
+ OP '==' (1, 13) (1, 15)
+ NUMBER '1' (1, 16) (1, 17)
+ OP '>=' (1, 18) (1, 20)
+ NUMBER '5' (1, 21) (1, 22)
+ OP '<=' (1, 23) (1, 25)
+ NUMBER '0x15' (1, 26) (1, 30)
+ OP '<=' (1, 31) (1, 33)
+ NUMBER '0x12' (1, 34) (1, 38)
+ OP '!=' (1, 39) (1, 41)
+ NUMBER '1' (1, 42) (1, 43)
+ NAME 'and' (1, 44) (1, 47)
+ NUMBER '5' (1, 48) (1, 49)
+ NAME 'in' (1, 50) (1, 52)
+ NUMBER '1' (1, 53) (1, 54)
+ NAME 'not' (1, 55) (1, 58)
+ NAME 'in' (1, 59) (1, 61)
+ NUMBER '1' (1, 62) (1, 63)
+ NAME 'is' (1, 64) (1, 66)
+ NUMBER '1' (1, 67) (1, 68)
+ NAME 'or' (1, 69) (1, 71)
+ NUMBER '5' (1, 72) (1, 73)
+ NAME 'is' (1, 74) (1, 76)
+ NAME 'not' (1, 77) (1, 80)
+ NUMBER '1' (1, 81) (1, 82)
+ OP ':' (1, 82) (1, 83)
+ NAME 'pass' (1, 84) (1, 88)
+
+Shift
+
+ >>> dump_tokens("x = 1 << 1 >> 5")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '1' (1, 4) (1, 5)
+ OP '<<' (1, 6) (1, 8)
+ NUMBER '1' (1, 9) (1, 10)
+ OP '>>' (1, 11) (1, 13)
+ NUMBER '5' (1, 14) (1, 15)
+
+Additive
+
+ >>> dump_tokens("x = 1 - y + 15 - 01 + 0x124 + z + a[5]")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '1' (1, 4) (1, 5)
+ OP '-' (1, 6) (1, 7)
+ NAME 'y' (1, 8) (1, 9)
+ OP '+' (1, 10) (1, 11)
+ NUMBER '15' (1, 12) (1, 14)
+ OP '-' (1, 15) (1, 16)
+ NUMBER '01' (1, 17) (1, 19)
+ OP '+' (1, 20) (1, 21)
+ NUMBER '0x124' (1, 22) (1, 27)
+ OP '+' (1, 28) (1, 29)
+ NAME 'z' (1, 30) (1, 31)
+ OP '+' (1, 32) (1, 33)
+ NAME 'a' (1, 34) (1, 35)
+ OP '[' (1, 35) (1, 36)
+ NUMBER '5' (1, 36) (1, 37)
+ OP ']' (1, 37) (1, 38)
+
+Multiplicative
+
+ >>> dump_tokens("x = 1//1*1/5*12%0x12")
+ NAME 'x' (1, 0) (1, 1)
+ OP '=' (1, 2) (1, 3)
+ NUMBER '1' (1, 4) (1, 5)
+ OP '//' (1, 5) (1, 7)
+ NUMBER '1' (1, 7) (1, 8)
+ OP '*' (1, 8) (1, 9)
+ NUMBER '1' (1, 9) (1, 10)
+ OP '/' (1, 10) (1, 11)
+ NUMBER '5' (1, 11) (1, 12)
+ OP '*' (1, 12) (1, 13)
+ NUMBER '12' (1, 13) (1, 15)
+ OP '%' (1, 15) (1, 16)
+ NUMBER '0x12' (1, 16) (1, 20)
+
+Unary
+
+ >>> dump_tokens("~1 ^ 1 & 1 |1 ^ -1")
+ OP '~' (1, 0) (1, 1)
+ NUMBER '1' (1, 1) (1, 2)
+ OP '^' (1, 3) (1, 4)
+ NUMBER '1' (1, 5) (1, 6)
+ OP '&' (1, 7) (1, 8)
+ NUMBER '1' (1, 9) (1, 10)
+ OP '|' (1, 11) (1, 12)
+ NUMBER '1' (1, 12) (1, 13)
+ OP '^' (1, 14) (1, 15)
+ OP '-' (1, 16) (1, 17)
+ NUMBER '1' (1, 17) (1, 18)
+ >>> dump_tokens("-1*1/1+1*1//1 - ---1**1")
+ OP '-' (1, 0) (1, 1)
+ NUMBER '1' (1, 1) (1, 2)
+ OP '*' (1, 2) (1, 3)
+ NUMBER '1' (1, 3) (1, 4)
+ OP '/' (1, 4) (1, 5)
+ NUMBER '1' (1, 5) (1, 6)
+ OP '+' (1, 6) (1, 7)
+ NUMBER '1' (1, 7) (1, 8)
+ OP '*' (1, 8) (1, 9)
+ NUMBER '1' (1, 9) (1, 10)
+ OP '//' (1, 10) (1, 12)
+ NUMBER '1' (1, 12) (1, 13)
+ OP '-' (1, 14) (1, 15)
+ OP '-' (1, 16) (1, 17)
+ OP '-' (1, 17) (1, 18)
+ OP '-' (1, 18) (1, 19)
+ NUMBER '1' (1, 19) (1, 20)
+ OP '**' (1, 20) (1, 22)
+ NUMBER '1' (1, 22) (1, 23)
+
+Selector
+
+ >>> dump_tokens("import sys, time\\nx = sys.modules['time'].time()")
+ NAME 'import' (1, 0) (1, 6)
+ NAME 'sys' (1, 7) (1, 10)
+ OP ',' (1, 10) (1, 11)
+ NAME 'time' (1, 12) (1, 16)
+ NEWLINE '\\n' (1, 16) (1, 17)
+ NAME 'x' (2, 0) (2, 1)
+ OP '=' (2, 2) (2, 3)
+ NAME 'sys' (2, 4) (2, 7)
+ OP '.' (2, 7) (2, 8)
+ NAME 'modules' (2, 8) (2, 15)
+ OP '[' (2, 15) (2, 16)
+ STRING "'time'" (2, 16) (2, 22)
+ OP ']' (2, 22) (2, 23)
+ OP '.' (2, 23) (2, 24)
+ NAME 'time' (2, 24) (2, 28)
+ OP '(' (2, 28) (2, 29)
+ OP ')' (2, 29) (2, 30)
+
+Methods
+
+ >>> dump_tokens("@staticmethod\\ndef foo(x,y): pass")
+ OP '@' (1, 0) (1, 1)
+ NAME 'staticmethod (1, 1) (1, 13)
+ NEWLINE '\\n' (1, 13) (1, 14)
+ NAME 'def' (2, 0) (2, 3)
+ NAME 'foo' (2, 4) (2, 7)
+ OP '(' (2, 7) (2, 8)
+ NAME 'x' (2, 8) (2, 9)
+ OP ',' (2, 9) (2, 10)
+ NAME 'y' (2, 10) (2, 11)
+ OP ')' (2, 11) (2, 12)
+ OP ':' (2, 12) (2, 13)
+ NAME 'pass' (2, 14) (2, 18)
+
+Backslash means line continuation, except for comments
+
+ >>> roundtrip("x=1+\\\\n"
+ ... "1\\n"
+ ... "# This is a comment\\\\n"
+ ... "# This also\\n")
+ True
+ >>> roundtrip("# Comment \\\\nx = 0")
+ True
+
+ >>>
+ >>> tempdir = os.path.dirname(f) or os.curdir
+ >>> testfiles = glob.glob(os.path.join(tempdir, "test*.py"))
+ >>> if not test_support.is_resource_enabled("compiler"):
+ ... testfiles = random.sample(testfiles, 10)
+ ...
+ >>> for testfile in testfiles:
+ ... if not roundtrip(open(testfile)): break
+ ... else: True
+ True
"""
-# ' Emacs hint
-import os, glob, random, time, sys
-import re
+from test import test_support
+from tokenize import (tokenize, untokenize, generate_tokens, NUMBER, NAME, OP,
+ STRING, ENDMARKER, tok_name)
from io import StringIO
-from test.test_support import (verbose, findfile, is_resource_enabled,
- TestFailed)
-from tokenize import (tokenize, generate_tokens, untokenize, tok_name,
- ENDMARKER, NUMBER, NAME, OP, STRING, COMMENT)
-
-# How much time in seconds can pass before we print a 'Still working' message.
-_PRINT_WORKING_MSG_INTERVAL = 5 * 60
-
-# Test roundtrip for `untokenize`. `f` is a file path. The source code in f
-# is tokenized, converted back to source code via tokenize.untokenize(),
-# and tokenized again from the latter. The test fails if the second
-# tokenization doesn't match the first.
-def test_roundtrip(f):
- ## print('Testing:', f)
- # Get the encoding first
- fobj = open(f, encoding="latin-1")
- first2lines = fobj.readline() + fobj.readline()
- fobj.close()
- m = re.search(r"coding:\s*(\S+)", first2lines)
- if m:
- encoding = m.group(1)
- ## print(" coding:", encoding)
- else:
- encoding = "utf-8"
- fobj = open(f, encoding=encoding)
- try:
- fulltok = list(generate_tokens(fobj.readline))
- finally:
- fobj.close()
-
- t1 = [tok[:2] for tok in fulltok]
- newtext = untokenize(t1)
- readline = iter(newtext.splitlines(1)).__next__
- t2 = [tok[:2] for tok in generate_tokens(readline)]
- if t1 != t2:
- raise TestFailed("untokenize() roundtrip failed for %r" % f)
+import os
def dump_tokens(s):
"""Print out the tokens in s in a table format.
@@ -132,7 +507,7 @@
if type == ENDMARKER:
break
type = tok_name[type]
- print("%(type)-10.10s %(token)-13.13r %(start)s %(end)s" % locals())
+ print("%(type)-10.10s %(token)-13.13r %(start)s %(end)s" % locals())
def roundtrip(s):
f = StringIO(s)
@@ -177,82 +552,12 @@
result.append((toknum, tokval))
return untokenize(result)
+
+__test__ = {"doctests" : doctests, 'decistmt': decistmt}
+
def test_main():
- if verbose:
- print('starting...')
-
- next_time = time.time() + _PRINT_WORKING_MSG_INTERVAL
-
- # Validate the tokenize_tests.txt file.
- # This makes sure it compiles, and displays any errors in it.
- f = open(findfile('tokenize_tests.txt'))
- sf = f.read()
- f.close()
- cf = compile(sf, 'tokenize_tests.txt', 'exec')
-
- # This displays the tokenization of tokenize_tests.py to stdout, and
- # regrtest.py checks that this equals the expected output (in the
- # test/output/ directory).
- f = open(findfile('tokenize_tests.txt'))
- tokenize(f.readline)
- f.close()
-
- # Now run test_roundtrip() over test_tokenize.py too, and over all
- # (if the "compiler" resource is enabled) or a small random sample (if
- # "compiler" is not enabled) of the test*.py files.
- f = findfile('test_tokenize.py')
- if verbose:
- print(' round trip: ', f, file=sys.__stdout__)
- test_roundtrip(f)
-
- testdir = os.path.dirname(f) or os.curdir
- testfiles = glob.glob(testdir + os.sep + 'test*.py')
- if not is_resource_enabled('compiler'):
- testfiles = random.sample(testfiles, 10)
-
- for f in testfiles:
- # Print still working message since this test can be really slow
- if verbose:
- print(' round trip: ', f, file=sys.__stdout__)
- if next_time <= time.time():
- next_time = time.time() + _PRINT_WORKING_MSG_INTERVAL
- print(' test_main still working, be patient...', file=sys.__stdout__)
- sys.__stdout__.flush()
-
- test_roundtrip(f)
-
- # Test detecton of IndentationError.
- sampleBadText = """\
-def foo():
- bar
- baz
-"""
-
- try:
- for tok in generate_tokens(StringIO(sampleBadText).readline):
- pass
- except IndentationError:
- pass
- else:
- raise TestFailed("Did not detect IndentationError:")
-
- # Run the doctests in this module.
- from test import test_tokenize # i.e., this module
- from test.test_support import run_doctest
- run_doctest(test_tokenize, verbose)
-
- if verbose:
- print('finished')
-
-def test_rarrow():
- """
- This function exists solely to test the tokenization of the RARROW
- operator.
-
- >>> tokenize(iter(['->']).__next__) #doctest: +NORMALIZE_WHITESPACE
- 1,0-1,2:\tOP\t'->'
- 2,0-2,0:\tENDMARKER\t''
- """
+ from test import test_tokenize
+ test_support.run_doctest(test_tokenize, True)
if __name__ == "__main__":
test_main()
diff --git a/Lib/test/test_winsound.py b/Lib/test/test_winsound.py
index 32b49d3..0d6ddf9 100644
--- a/Lib/test/test_winsound.py
+++ b/Lib/test/test_winsound.py
@@ -9,6 +9,13 @@
class BeepTest(unittest.TestCase):
+ # As with PlaySoundTest, incorporate the _have_soundcard() check
+ # into our test methods. If there's no audio device present,
+ # winsound.Beep returns 0 and GetLastError() returns 127, which
+ # is: ERROR_PROC_NOT_FOUND ("The specified procedure could not
+ # be found"). (FWIW, virtual/Hyper-V systems fall under this
+ # scenario as they have no sound devices whatsoever (not even
+ # a legacy Beep device).)
def test_errors(self):
self.assertRaises(TypeError, winsound.Beep)
@@ -16,12 +23,17 @@
self.assertRaises(ValueError, winsound.Beep, 32768, 75)
def test_extremes(self):
- winsound.Beep(37, 75)
- winsound.Beep(32767, 75)
+ if _have_soundcard():
+ winsound.Beep(37, 75)
+ winsound.Beep(32767, 75)
+ else:
+ self.assertRaises(RuntimeError, winsound.Beep, 37, 75)
+ self.assertRaises(RuntimeError, winsound.Beep, 32767, 75)
def test_increasingfrequency(self):
- for i in range(100, 2000, 100):
- winsound.Beep(i, 75)
+ if _have_soundcard():
+ for i in range(100, 2000, 100):
+ winsound.Beep(i, 75)
class MessageBeepTest(unittest.TestCase):
diff --git a/Misc/ACKS b/Misc/ACKS
index f856bcf..0c431c0 100644
--- a/Misc/ACKS
+++ b/Misc/ACKS
@@ -179,6 +179,7 @@
Andy Dustman
Gary Duzan
Eugene Dvurechenski
+Josip Dzolonga
Maxim Dzumanenko
Hans Eckardt
Grant Edwards
@@ -430,6 +431,7 @@
Grzegorz Makarewicz
Ken Manheimer
Vladimir Marangozov
+David Marek
Doug Marien
Alex Martelli
Anthony Martin
@@ -561,6 +563,7 @@
Andy Robinson
Jim Robinson
Kevin Rodgers
+Giampaolo Rodola
Mike Romberg
Case Roole
Timothy Roscoe
diff --git a/Misc/build.sh b/Misc/build.sh
index 70034c4..3a0e982 100755
--- a/Misc/build.sh
+++ b/Misc/build.sh
@@ -67,7 +67,7 @@
# Note: test_XXX (none currently) really leak, but are disabled
# so we don't send spam. Any test which really leaks should only
# be listed here if there are also test cases under Lib/test/leakers.
-LEAKY_TESTS="test_(asynchat|cmd_line|popen2|socket|sys|threadsignals|urllib2_localnet)"
+LEAKY_TESTS="test_(asynchat|cmd_line|popen2|socket|smtplib|sys|threadsignals|urllib2_localnet)"
# These tests always fail, so skip them so we don't get false positives.
_ALWAYS_SKIP=""
@@ -95,7 +95,7 @@
place_summary_first() {
testf=$1
sed -n '/^[0-9][0-9]* tests OK\./,$p' < $testf \
- | egrep -v '\[[0-9]+ refs\]' > $testf.tmp
+ | egrep -v '\[[0-9]+ refs\]' > $testf.tmp
echo "" >> $testf.tmp
cat $testf >> $testf.tmp
mv $testf.tmp $testf
@@ -105,7 +105,7 @@
testf=$1
n=`grep -ic " failed:" $testf`
if [ $n -eq 1 ] ; then
- n=`grep " failed:" $testf | sed -e 's/ .*//'`
+ n=`grep " failed:" $testf | sed -e 's/ .*//'`
fi
echo $n
}
@@ -117,17 +117,17 @@
if [ "$FAILURE_CC" != "" ]; then
dest="$dest -c $FAILURE_CC"
fi
- if [ "x$3" != "x" ] ; then
- (echo "More important issues:"
- echo "----------------------"
- egrep -v "$3" < $2
- echo ""
- echo "Less important issues:"
- echo "----------------------"
- egrep "$3" < $2)
+ if [ "x$3" != "x" ] ; then
+ (echo "More important issues:"
+ echo "----------------------"
+ egrep -v "$3" < $2
+ echo ""
+ echo "Less important issues:"
+ echo "----------------------"
+ egrep "$3" < $2)
else
- cat $2
- fi | mutt -s "$FAILURE_SUBJECT $1 ($NUM_FAILURES)" $dest
+ cat $2
+ fi | mutt -s "$FAILURE_SUBJECT $1 ($NUM_FAILURES)" $dest
fi
}
@@ -204,7 +204,7 @@
## make and run basic tests
F=make-test.out
start=`current_time`
- $PYTHON $REGRTEST_ARGS $ALWAYS_SKIP >& build/$F
+ $PYTHON $REGRTEST_ARGS -u urlfetch >& build/$F
NUM_FAILURES=`count_failures build/$F`
place_summary_first build/$F
update_status "Testing basics ($NUM_FAILURES failures)" "$F" $start
@@ -212,7 +212,7 @@
F=make-test-opt.out
start=`current_time`
- $PYTHON -O $REGRTEST_ARGS $ALWAYS_SKIP >& build/$F
+ $PYTHON -O $REGRTEST_ARGS -u urlfetch >& build/$F
NUM_FAILURES=`count_failures build/$F`
place_summary_first build/$F
update_status "Testing opt ($NUM_FAILURES failures)" "$F" $start
@@ -223,8 +223,8 @@
start=`current_time`
## ensure that the reflog exists so the grep doesn't fail
touch $REFLOG
- $PYTHON $REGRTEST_ARGS -R 4:3:$REFLOG -u network $LEAKY_SKIPS >& build/$F
- LEAK_PAT="($LEAKY_TESTS|sum=0)"
+ $PYTHON $REGRTEST_ARGS -R 4:3:$REFLOG -u network,urlfetch $LEAKY_SKIPS >& build/$F
+ LEAK_PAT="($LEAKY_TESTS|sum=0)"
NUM_FAILURES=`egrep -vc "$LEAK_PAT" $REFLOG`
place_summary_first build/$F
update_status "Testing refleaks ($NUM_FAILURES failures)" "$F" $start
diff --git a/Modules/_ctypes/_ctypes.c b/Modules/_ctypes/_ctypes.c
index e4fa612..d39cf4b 100644
--- a/Modules/_ctypes/_ctypes.c
+++ b/Modules/_ctypes/_ctypes.c
@@ -203,7 +203,7 @@
0, /* tp_dictoffset */
0, /* tp_init */
0, /* tp_alloc */
- PyType_GenericNew, /* tp_new */
+ 0, /* tp_new */
0, /* tp_free */
};
@@ -1242,7 +1242,7 @@
*/
-static char *SIMPLE_TYPE_CHARS = "cbBhHiIlLdfuzZqQPXOvtg";
+static char *SIMPLE_TYPE_CHARS = "cbBhHiIlLdfuzZqQPXOv?g";
static PyObject *
c_wchar_p_from_param(PyObject *type, PyObject *value)
diff --git a/Modules/_ctypes/_ctypes_test.c b/Modules/_ctypes/_ctypes_test.c
index 63fb580..ce83df7 100644
--- a/Modules/_ctypes/_ctypes_test.c
+++ b/Modules/_ctypes/_ctypes_test.c
@@ -12,6 +12,15 @@
/* some functions handy for testing */
+EXPORT(void)testfunc_array(int values[4])
+{
+ printf("testfunc_array %d %d %d %d\n",
+ values[0],
+ values[1],
+ values[2],
+ values[3]);
+}
+
EXPORT(long double)testfunc_Ddd(double a, double b)
{
long double result = (long double)(a * b);
diff --git a/Modules/_ctypes/cfield.c b/Modules/_ctypes/cfield.c
index f7c78f3..4e02563 100644
--- a/Modules/_ctypes/cfield.c
+++ b/Modules/_ctypes/cfield.c
@@ -716,7 +716,7 @@
#endif
static PyObject *
-t_set(void *ptr, PyObject *value, Py_ssize_t size)
+bool_set(void *ptr, PyObject *value, Py_ssize_t size)
{
switch (PyObject_IsTrue(value)) {
case -1:
@@ -731,7 +731,7 @@
}
static PyObject *
-t_get(void *ptr, Py_ssize_t size)
+bool_get(void *ptr, Py_ssize_t size)
{
return PyBool_FromLong((long)*(BOOL_TYPE *)ptr);
}
@@ -1665,15 +1665,15 @@
{ 'v', vBOOL_set, vBOOL_get, &ffi_type_sshort},
#endif
#if SIZEOF__BOOL == 1
- { 't', t_set, t_get, &ffi_type_uchar}, /* Also fallback for no native _Bool support */
+ { '?', bool_set, bool_get, &ffi_type_uchar}, /* Also fallback for no native _Bool support */
#elif SIZEOF__BOOL == SIZEOF_SHORT
- { 't', t_set, t_get, &ffi_type_ushort},
+ { '?', bool_set, bool_get, &ffi_type_ushort},
#elif SIZEOF__BOOL == SIZEOF_INT
- { 't', t_set, t_get, &ffi_type_uint, I_set_sw, I_get_sw},
+ { '?', bool_set, bool_get, &ffi_type_uint, I_set_sw, I_get_sw},
#elif SIZEOF__BOOL == SIZEOF_LONG
- { 't', t_set, t_get, &ffi_type_ulong, L_set_sw, L_get_sw},
+ { '?', bool_set, bool_get, &ffi_type_ulong, L_set_sw, L_get_sw},
#elif SIZEOF__BOOL == SIZEOF_LONG_LONG
- { 't', t_set, t_get, &ffi_type_ulong, Q_set_sw, Q_get_sw},
+ { '?', bool_set, bool_get, &ffi_type_ulong, Q_set_sw, Q_get_sw},
#endif /* SIZEOF__BOOL */
{ 'O', O_set, O_get, &ffi_type_pointer},
{ 0, NULL, NULL, NULL},
diff --git a/Modules/_heapqmodule.c b/Modules/_heapqmodule.c
index 2ae1f03..97ccd86 100644
--- a/Modules/_heapqmodule.c
+++ b/Modules/_heapqmodule.c
@@ -196,6 +196,48 @@
item = heapreplace(heap, item)\n");
static PyObject *
+heappushpop(PyObject *self, PyObject *args)
+{
+ PyObject *heap, *item, *returnitem;
+ int cmp;
+
+ if (!PyArg_UnpackTuple(args, "heappushpop", 2, 2, &heap, &item))
+ return NULL;
+
+ if (!PyList_Check(heap)) {
+ PyErr_SetString(PyExc_TypeError, "heap argument must be a list");
+ return NULL;
+ }
+
+ if (PyList_GET_SIZE(heap) < 1) {
+ Py_INCREF(item);
+ return item;
+ }
+
+ cmp = PyObject_RichCompareBool(item, PyList_GET_ITEM(heap, 0), Py_LE);
+ if (cmp == -1)
+ return NULL;
+ if (cmp == 1) {
+ Py_INCREF(item);
+ return item;
+ }
+
+ returnitem = PyList_GET_ITEM(heap, 0);
+ Py_INCREF(item);
+ PyList_SET_ITEM(heap, 0, item);
+ if (_siftup((PyListObject *)heap, 0) == -1) {
+ Py_DECREF(returnitem);
+ return NULL;
+ }
+ return returnitem;
+}
+
+PyDoc_STRVAR(heappushpop_doc,
+"Push item on the heap, then pop and return the smallest item\n\
+from the heap. The combined action runs more efficiently than\n\
+heappush() followed by a separate call to heappop().");
+
+static PyObject *
heapify(PyObject *self, PyObject *heap)
{
Py_ssize_t i, n;
@@ -468,6 +510,8 @@
static PyMethodDef heapq_methods[] = {
{"heappush", (PyCFunction)heappush,
METH_VARARGS, heappush_doc},
+ {"heappushpop", (PyCFunction)heappushpop,
+ METH_VARARGS, heappushpop_doc},
{"heappop", (PyCFunction)heappop,
METH_O, heappop_doc},
{"heapreplace", (PyCFunction)heapreplace,
diff --git a/Modules/_struct.c b/Modules/_struct.c
index 28f67e9..13ffee7 100644
--- a/Modules/_struct.c
+++ b/Modules/_struct.c
@@ -797,7 +797,7 @@
{'q', sizeof(PY_LONG_LONG), LONG_LONG_ALIGN, nu_longlong, np_longlong},
{'Q', sizeof(PY_LONG_LONG), LONG_LONG_ALIGN, nu_ulonglong,np_ulonglong},
#endif
- {'t', sizeof(BOOL_TYPE), BOOL_ALIGN, nu_bool, np_bool},
+ {'?', sizeof(BOOL_TYPE), BOOL_ALIGN, nu_bool, np_bool},
{'f', sizeof(float), FLOAT_ALIGN, nu_float, np_float},
{'d', sizeof(double), DOUBLE_ALIGN, nu_double, np_double},
{'P', sizeof(void *), VOID_P_ALIGN, nu_void_p, np_void_p},
@@ -1034,7 +1034,7 @@
{'L', 4, 0, bu_uint, bp_uint},
{'q', 8, 0, bu_longlong, bp_longlong},
{'Q', 8, 0, bu_ulonglong, bp_ulonglong},
- {'t', 1, 0, bu_bool, bp_bool},
+ {'?', 1, 0, bu_bool, bp_bool},
{'f', 4, 0, bu_float, bp_float},
{'d', 8, 0, bu_double, bp_double},
{0}
@@ -1253,7 +1253,7 @@
{'L', 4, 0, lu_uint, lp_uint},
{'q', 8, 0, lu_longlong, lp_longlong},
{'Q', 8, 0, lu_ulonglong, lp_ulonglong},
- {'t', 1, 0, bu_bool, bp_bool}, /* Std rep not endian dep,
+ {'?', 1, 0, bu_bool, bp_bool}, /* Std rep not endian dep,
but potentially different from native rep -- reuse bx_bool funcs. */
{'f', 4, 0, lu_float, lp_float},
{'d', 8, 0, lu_double, lp_double},
diff --git a/Modules/datetimemodule.c b/Modules/datetimemodule.c
index 27c404f..798865d 100644
--- a/Modules/datetimemodule.c
+++ b/Modules/datetimemodule.c
@@ -1170,10 +1170,24 @@
return NULL;
}
+static PyObject *
+make_freplacement(PyObject *object)
+{
+ char freplacement[7];
+ if (PyTime_Check(object))
+ sprintf(freplacement, "%06d", TIME_GET_MICROSECOND(object));
+ else if (PyDateTime_Check(object))
+ sprintf(freplacement, "%06d", DATE_GET_MICROSECOND(object));
+ else
+ sprintf(freplacement, "%06d", 0);
+
+ return PyString_FromStringAndSize(freplacement, strlen(freplacement));
+}
+
/* I sure don't want to reproduce the strftime code from the time module,
* so this imports the module and calls it. All the hair is due to
- * giving special meanings to the %z and %Z format codes via a preprocessing
- * step on the format string.
+ * giving special meanings to the %z, %Z and %f format codes via a
+ * preprocessing step on the format string.
* tzinfoarg is the argument to pass to the object's tzinfo method, if
* needed.
*/
@@ -1185,6 +1199,7 @@
PyObject *zreplacement = NULL; /* py string, replacement for %z */
PyObject *Zreplacement = NULL; /* py string, replacement for %Z */
+ PyObject *freplacement = NULL; /* py string, replacement for %f */
const char *pin;/* pointer to next char in input format */
Py_ssize_t flen;/* length of input format */
@@ -1232,7 +1247,7 @@
}
}
- /* Scan the input format, looking for %z and %Z escapes, building
+ /* Scan the input format, looking for %z/%Z/%f escapes, building
* a new format. Since computing the replacements for those codes
* is expensive, don't unless they're actually used.
*/
@@ -1295,6 +1310,18 @@
&ntoappend);
ntoappend = Py_SIZE(Zreplacement);
}
+ else if (ch == 'f') {
+ /* format microseconds */
+ if (freplacement == NULL) {
+ freplacement = make_freplacement(object);
+ if (freplacement == NULL)
+ goto Done;
+ }
+ assert(freplacement != NULL);
+ assert(PyString_Check(freplacement));
+ ptoappend = PyString_AS_STRING(freplacement);
+ ntoappend = PyString_GET_SIZE(freplacement);
+ }
else {
/* percent followed by neither z nor Z */
ptoappend = pin - 2;
@@ -1341,6 +1368,7 @@
Py_DECREF(time);
}
Done:
+ Py_XDECREF(freplacement);
Py_XDECREF(zreplacement);
Py_XDECREF(Zreplacement);
Py_XDECREF(newfmt);
@@ -3800,28 +3828,47 @@
static PyObject *
datetime_strptime(PyObject *cls, PyObject *args)
{
- PyObject *result = NULL, *obj, *module;
+ static PyObject *module = NULL;
+ PyObject *result = NULL, *obj, *st = NULL, *frac = NULL;
const Py_UNICODE *string, *format;
if (!PyArg_ParseTuple(args, "uu:strptime", &string, &format))
return NULL;
- if ((module = PyImport_ImportModuleNoBlock("time")) == NULL)
+ if (module == NULL &&
+ (module = PyImport_ImportModuleNoBlock("_strptime")) == NULL)
return NULL;
- obj = PyObject_CallMethod(module, "strptime", "uu", string, format);
- Py_DECREF(module);
+ /* _strptime._strptime returns a two-element tuple. The first
+ element is a time.struct_time object. The second is the
+ microseconds (which are not defined for time.struct_time). */
+ obj = PyObject_CallMethod(module, "_strptime", "ss", string, format);
if (obj != NULL) {
- int i, good_timetuple = 1, overflow;
- long int ia[6];
- if (PySequence_Check(obj) && PySequence_Size(obj) >= 6)
- for (i=0; i < 6; i++) {
- PyObject *p = PySequence_GetItem(obj, i);
- if (p == NULL) {
- Py_DECREF(obj);
- return NULL;
+ int i, good_timetuple = 1;
+ long int ia[7];
+ if (PySequence_Check(obj) && PySequence_Size(obj) == 2) {
+ st = PySequence_GetItem(obj, 0);
+ frac = PySequence_GetItem(obj, 1);
+ if (st == NULL || frac == NULL)
+ good_timetuple = 0;
+ /* copy y/m/d/h/m/s values out of the
+ time.struct_time */
+ if (good_timetuple &&
+ PySequence_Check(st) &&
+ PySequence_Size(st) >= 6) {
+ for (i=0; i < 6; i++) {
+ PyObject *p = PySequence_GetItem(st, i);
+ if (p == NULL) {
+ good_timetuple = 0;
+ break;
+ }
+ if (PyLong_Check(p))
+ ia[i] = PyLong_AsLong(p);
+ else
+ good_timetuple = 0;
+ Py_DECREF(p);
}
- if (PyLong_CheckExact(p)) {
+/* if (PyLong_CheckExact(p)) {
ia[i] = PyLong_AsLongAndOverflow(p, &overflow);
if (overflow)
good_timetuple = 0;
@@ -3829,17 +3876,29 @@
else
good_timetuple = 0;
Py_DECREF(p);
- }
+*/ }
+ else
+ good_timetuple = 0;
+ /* follow that up with a little dose of microseconds */
+ if (PyLong_Check(frac))
+ ia[6] = PyLong_AsLong(frac);
+ else
+ good_timetuple = 0;
+ }
else
good_timetuple = 0;
if (good_timetuple)
- result = PyObject_CallFunction(cls, "iiiiii",
- ia[0], ia[1], ia[2], ia[3], ia[4], ia[5]);
+ result = PyObject_CallFunction(cls, "iiiiiii",
+ ia[0], ia[1], ia[2],
+ ia[3], ia[4], ia[5],
+ ia[6]);
else
PyErr_SetString(PyExc_ValueError,
- "unexpected value from time.strptime");
- Py_DECREF(obj);
+ "unexpected value from _strptime._strptime");
}
+ Py_XDECREF(obj);
+ Py_XDECREF(st);
+ Py_XDECREF(frac);
return result;
}
diff --git a/Modules/gdbmmodule.c b/Modules/gdbmmodule.c
index cf197f5..a8abbd3 100644
--- a/Modules/gdbmmodule.c
+++ b/Modules/gdbmmodule.c
@@ -130,7 +130,7 @@
PyErr_SetObject(PyExc_KeyError, key);
return NULL;
}
- v = PyBytes_FromStringAndSize(drec.dptr, drec.dsize);
+ v = PyString_FromStringAndSize(drec.dptr, drec.dsize);
free(drec.dptr);
return v;
}
@@ -220,7 +220,7 @@
key = gdbm_firstkey(dp->di_dbm);
while (key.dptr) {
- item = PyBytes_FromStringAndSize(key.dptr, key.dsize);
+ item = PyString_FromStringAndSize(key.dptr, key.dsize);
if (item == NULL) {
free(key.dptr);
Py_DECREF(v);
@@ -291,7 +291,7 @@
check_dbmobject_open(dp);
key = gdbm_firstkey(dp->di_dbm);
if (key.dptr) {
- v = PyBytes_FromStringAndSize(key.dptr, key.dsize);
+ v = PyString_FromStringAndSize(key.dptr, key.dsize);
free(key.dptr);
return v;
}
@@ -323,7 +323,7 @@
check_dbmobject_open(dp);
nextkey = gdbm_nextkey(dp->di_dbm, key);
if (nextkey.dptr) {
- v = PyBytes_FromStringAndSize(nextkey.dptr, nextkey.dsize);
+ v = PyString_FromStringAndSize(nextkey.dptr, nextkey.dsize);
free(nextkey.dptr);
return v;
}
diff --git a/Modules/itertoolsmodule.c b/Modules/itertoolsmodule.c
index b52bea8..61128d2 100644
--- a/Modules/itertoolsmodule.c
+++ b/Modules/itertoolsmodule.c
@@ -198,7 +198,7 @@
{
_grouperobject *igo;
- igo = PyObject_New(_grouperobject, &_grouper_type);
+ igo = PyObject_GC_New(_grouperobject, &_grouper_type);
if (igo == NULL)
return NULL;
igo->parent = (PyObject *)parent;
@@ -206,15 +206,25 @@
igo->tgtkey = tgtkey;
Py_INCREF(tgtkey);
+ PyObject_GC_Track(igo);
return (PyObject *)igo;
}
static void
_grouper_dealloc(_grouperobject *igo)
{
+ PyObject_GC_UnTrack(igo);
Py_DECREF(igo->parent);
Py_DECREF(igo->tgtkey);
- PyObject_Del(igo);
+ PyObject_GC_Del(igo);
+}
+
+static int
+_grouper_traverse(_grouperobject *igo, visitproc visit, void *arg)
+{
+ Py_VISIT(igo->parent);
+ Py_VISIT(igo->tgtkey);
+ return 0;
}
static PyObject *
@@ -280,9 +290,9 @@
PyObject_GenericGetAttr, /* tp_getattro */
0, /* tp_setattro */
0, /* tp_as_buffer */
- Py_TPFLAGS_DEFAULT, /* tp_flags */
+ Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC, /* tp_flags */
0, /* tp_doc */
- 0, /* tp_traverse */
+ (traverseproc)_grouper_traverse,/* tp_traverse */
0, /* tp_clear */
0, /* tp_richcompare */
0, /* tp_weaklistoffset */
@@ -299,7 +309,7 @@
0, /* tp_init */
0, /* tp_alloc */
0, /* tp_new */
- PyObject_Del, /* tp_free */
+ PyObject_GC_Del, /* tp_free */
};
@@ -2059,6 +2069,281 @@
};
+/* permutations object ************************************************************
+
+def permutations(iterable, r=None):
+ 'permutations(range(3), 2) --> (0,1) (0,2) (1,0) (1,2) (2,0) (2,1)'
+ pool = tuple(iterable)
+ n = len(pool)
+ r = n if r is None else r
+ indices = range(n)
+ cycles = range(n-r+1, n+1)[::-1]
+ yield tuple(pool[i] for i in indices[:r])
+ while n:
+ for i in reversed(range(r)):
+ cycles[i] -= 1
+ if cycles[i] == 0:
+ indices[i:] = indices[i+1:] + indices[i:i+1]
+ cycles[i] = n - i
+ else:
+ j = cycles[i]
+ indices[i], indices[-j] = indices[-j], indices[i]
+ yield tuple(pool[i] for i in indices[:r])
+ break
+ else:
+ return
+*/
+
+typedef struct {
+ PyObject_HEAD
+ PyObject *pool; /* input converted to a tuple */
+ Py_ssize_t *indices; /* one index per element in the pool */
+ Py_ssize_t *cycles; /* one rollover counter per element in the result */
+ PyObject *result; /* most recently returned result tuple */
+ Py_ssize_t r; /* size of result tuple */
+ int stopped; /* set to 1 when the permutations iterator is exhausted */
+} permutationsobject;
+
+static PyTypeObject permutations_type;
+
+static PyObject *
+permutations_new(PyTypeObject *type, PyObject *args, PyObject *kwds)
+{
+ permutationsobject *po;
+ Py_ssize_t n;
+ Py_ssize_t r;
+ PyObject *robj = Py_None;
+ PyObject *pool = NULL;
+ PyObject *iterable = NULL;
+ Py_ssize_t *indices = NULL;
+ Py_ssize_t *cycles = NULL;
+ Py_ssize_t i;
+ static char *kwargs[] = {"iterable", "r", NULL};
+
+ if (!PyArg_ParseTupleAndKeywords(args, kwds, "O|O:permutations", kwargs,
+ &iterable, &robj))
+ return NULL;
+
+ pool = PySequence_Tuple(iterable);
+ if (pool == NULL)
+ goto error;
+ n = PyTuple_GET_SIZE(pool);
+
+ r = n;
+ if (robj != Py_None) {
+ if (!PyLong_Check(robj)) {
+ PyErr_SetString(PyExc_TypeError, "Expected int as r");
+ return NULL;
+ }
+ r = PyLong_AsSsize_t(robj);
+ if (r == -1 && PyErr_Occurred())
+ goto error;
+ }
+ if (r < 0) {
+ PyErr_SetString(PyExc_ValueError, "r must be non-negative");
+ goto error;
+ }
+ if (r > n) {
+ PyErr_SetString(PyExc_ValueError, "r cannot be bigger than the iterable");
+ goto error;
+ }
+
+ indices = PyMem_Malloc(n * sizeof(Py_ssize_t));
+ cycles = PyMem_Malloc(r * sizeof(Py_ssize_t));
+ if (indices == NULL || cycles == NULL) {
+ PyErr_NoMemory();
+ goto error;
+ }
+
+ for (i=0 ; i<n ; i++)
+ indices[i] = i;
+ for (i=0 ; i<r ; i++)
+ cycles[i] = n - i;
+
+ /* create permutationsobject structure */
+ po = (permutationsobject *)type->tp_alloc(type, 0);
+ if (po == NULL)
+ goto error;
+
+ po->pool = pool;
+ po->indices = indices;
+ po->cycles = cycles;
+ po->result = NULL;
+ po->r = r;
+ po->stopped = 0;
+
+ return (PyObject *)po;
+
+error:
+ if (indices != NULL)
+ PyMem_Free(indices);
+ if (cycles != NULL)
+ PyMem_Free(cycles);
+ Py_XDECREF(pool);
+ return NULL;
+}
+
+static void
+permutations_dealloc(permutationsobject *po)
+{
+ PyObject_GC_UnTrack(po);
+ Py_XDECREF(po->pool);
+ Py_XDECREF(po->result);
+ PyMem_Free(po->indices);
+ PyMem_Free(po->cycles);
+ Py_TYPE(po)->tp_free(po);
+}
+
+static int
+permutations_traverse(permutationsobject *po, visitproc visit, void *arg)
+{
+ Py_VISIT(po->pool);
+ Py_VISIT(po->result);
+ return 0;
+}
+
+static PyObject *
+permutations_next(permutationsobject *po)
+{
+ PyObject *elem;
+ PyObject *oldelem;
+ PyObject *pool = po->pool;
+ Py_ssize_t *indices = po->indices;
+ Py_ssize_t *cycles = po->cycles;
+ PyObject *result = po->result;
+ Py_ssize_t n = PyTuple_GET_SIZE(pool);
+ Py_ssize_t r = po->r;
+ Py_ssize_t i, j, k, index;
+
+ if (po->stopped)
+ return NULL;
+
+ if (result == NULL) {
+ /* On the first pass, initialize result tuple using the indices */
+ result = PyTuple_New(r);
+ if (result == NULL)
+ goto empty;
+ po->result = result;
+ for (i=0; i<r ; i++) {
+ index = indices[i];
+ elem = PyTuple_GET_ITEM(pool, index);
+ Py_INCREF(elem);
+ PyTuple_SET_ITEM(result, i, elem);
+ }
+ } else {
+ if (n == 0)
+ goto empty;
+
+ /* Copy the previous result tuple or re-use it if available */
+ if (Py_REFCNT(result) > 1) {
+ PyObject *old_result = result;
+ result = PyTuple_New(r);
+ if (result == NULL)
+ goto empty;
+ po->result = result;
+ for (i=0; i<r ; i++) {
+ elem = PyTuple_GET_ITEM(old_result, i);
+ Py_INCREF(elem);
+ PyTuple_SET_ITEM(result, i, elem);
+ }
+ Py_DECREF(old_result);
+ }
+ /* Now, we've got the only copy so we can update it in-place */
+ assert(r == 0 || Py_REFCNT(result) == 1);
+
+ /* Decrement rightmost cycle, moving leftward upon zero rollover */
+ for (i=r-1 ; i>=0 ; i--) {
+ cycles[i] -= 1;
+ if (cycles[i] == 0) {
+ /* rotatation: indices[i:] = indices[i+1:] + indices[i:i+1] */
+ index = indices[i];
+ for (j=i ; j<n-1 ; j++)
+ indices[j] = indices[j+1];
+ indices[n-1] = index;
+ cycles[i] = n - i;
+ } else {
+ j = cycles[i];
+ index = indices[i];
+ indices[i] = indices[n-j];
+ indices[n-j] = index;
+
+ for (k=i; k<r ; k++) {
+ /* start with i, the leftmost element that changed */
+ /* yield tuple(pool[k] for k in indices[:r]) */
+ index = indices[k];
+ elem = PyTuple_GET_ITEM(pool, index);
+ Py_INCREF(elem);
+ oldelem = PyTuple_GET_ITEM(result, k);
+ PyTuple_SET_ITEM(result, k, elem);
+ Py_DECREF(oldelem);
+ }
+ break;
+ }
+ }
+ /* If i is negative, then the cycles have all
+ rolled-over and we're done. */
+ if (i < 0)
+ goto empty;
+ }
+ Py_INCREF(result);
+ return result;
+
+empty:
+ po->stopped = 1;
+ return NULL;
+}
+
+PyDoc_STRVAR(permutations_doc,
+"permutations(iterables[, r]) --> permutations object\n\
+\n\
+Return successive r-length permutations of elements in the iterable.\n\n\
+permutations(range(4), 3) --> (0,1,2), (0,1,3), (0,2,3), (1,2,3)");
+
+static PyTypeObject permutations_type = {
+ PyVarObject_HEAD_INIT(NULL, 0)
+ "itertools.permutations", /* tp_name */
+ sizeof(permutationsobject), /* tp_basicsize */
+ 0, /* tp_itemsize */
+ /* methods */
+ (destructor)permutations_dealloc, /* tp_dealloc */
+ 0, /* tp_print */
+ 0, /* tp_getattr */
+ 0, /* tp_setattr */
+ 0, /* tp_compare */
+ 0, /* tp_repr */
+ 0, /* tp_as_number */
+ 0, /* tp_as_sequence */
+ 0, /* tp_as_mapping */
+ 0, /* tp_hash */
+ 0, /* tp_call */
+ 0, /* tp_str */
+ PyObject_GenericGetAttr, /* tp_getattro */
+ 0, /* tp_setattro */
+ 0, /* tp_as_buffer */
+ Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC |
+ Py_TPFLAGS_BASETYPE, /* tp_flags */
+ permutations_doc, /* tp_doc */
+ (traverseproc)permutations_traverse, /* tp_traverse */
+ 0, /* tp_clear */
+ 0, /* tp_richcompare */
+ 0, /* tp_weaklistoffset */
+ PyObject_SelfIter, /* tp_iter */
+ (iternextfunc)permutations_next, /* tp_iternext */
+ 0, /* tp_methods */
+ 0, /* tp_members */
+ 0, /* tp_getset */
+ 0, /* tp_base */
+ 0, /* tp_dict */
+ 0, /* tp_descr_get */
+ 0, /* tp_descr_set */
+ 0, /* tp_dictoffset */
+ 0, /* tp_init */
+ 0, /* tp_alloc */
+ permutations_new, /* tp_new */
+ PyObject_GC_Del, /* tp_free */
+};
+
+
/* filterfalse object ************************************************************/
typedef struct {
@@ -2762,6 +3047,7 @@
&filterfalse_type,
&count_type,
&ziplongest_type,
+ &permutations_type,
&product_type,
&repeat_type,
&groupby_type,
diff --git a/Modules/timemodule.c b/Modules/timemodule.c
index de8c99c..bd0d063 100644
--- a/Modules/timemodule.c
+++ b/Modules/timemodule.c
@@ -561,7 +561,7 @@
if (!strptime_module)
return NULL;
- strptime_result = PyObject_CallMethod(strptime_module, "strptime", "O", args);
+ strptime_result = PyObject_CallMethod(strptime_module, "_strptime_time", "O", args);
Py_DECREF(strptime_module);
return strptime_result;
}
diff --git a/Objects/floatobject.c b/Objects/floatobject.c
index e074a37..353a21d 100644
--- a/Objects/floatobject.c
+++ b/Objects/floatobject.c
@@ -1639,9 +1639,6 @@
/*----------------------------------------------------------------------------
* _PyFloat_{Pack,Unpack}{4,8}. See floatobject.h.
- *
- * TODO: On platforms that use the standard IEEE-754 single and double
- * formats natively, these routines could simply copy the bytes.
*/
int
_PyFloat_Pack4(double x, unsigned char *p, int le)
@@ -1721,28 +1718,31 @@
/* Done */
return 0;
- Overflow:
- PyErr_SetString(PyExc_OverflowError,
- "float too large to pack with f format");
- return -1;
}
else {
float y = (float)x;
const char *s = (char*)&y;
int i, incr = 1;
+ if (Py_IS_INFINITY(y) && !Py_IS_INFINITY(x))
+ goto Overflow;
+
if ((float_format == ieee_little_endian_format && !le)
|| (float_format == ieee_big_endian_format && le)) {
p += 3;
incr = -1;
}
-
+
for (i = 0; i < 4; i++) {
*p = *s++;
p += incr;
}
return 0;
}
+ Overflow:
+ PyErr_SetString(PyExc_OverflowError,
+ "float too large to pack with f format");
+ return -1;
}
int
diff --git a/Objects/unicodeobject.c b/Objects/unicodeobject.c
index 7359821..dcad808 100644
--- a/Objects/unicodeobject.c
+++ b/Objects/unicodeobject.c
@@ -6590,7 +6590,8 @@
Py_UNICODE *e;
Py_UNICODE *p;
Py_UNICODE *q;
- Py_ssize_t i, j, old_j;
+ Py_UNICODE *qe;
+ Py_ssize_t i, j, incr;
PyUnicodeObject *u;
int tabsize = 8;
@@ -6598,63 +6599,70 @@
return NULL;
/* First pass: determine size of output string */
- i = j = old_j = 0;
- e = self->str + self->length;
+ i = 0; /* chars up to and including most recent \n or \r */
+ j = 0; /* chars since most recent \n or \r (use in tab calculations) */
+ e = self->str + self->length; /* end of input */
for (p = self->str; p < e; p++)
if (*p == '\t') {
if (tabsize > 0) {
- j += tabsize - (j % tabsize);
- if (old_j > j) {
- PyErr_SetString(PyExc_OverflowError,
- "new string is too long");
- return NULL;
- }
- old_j = j;
- }
+ incr = tabsize - (j % tabsize); /* cannot overflow */
+ if (j > PY_SSIZE_T_MAX - incr)
+ goto overflow1;
+ j += incr;
+ }
}
else {
+ if (j > PY_SSIZE_T_MAX - 1)
+ goto overflow1;
j++;
if (*p == '\n' || *p == '\r') {
+ if (i > PY_SSIZE_T_MAX - j)
+ goto overflow1;
i += j;
- old_j = j = 0;
- if (i < 0) {
- PyErr_SetString(PyExc_OverflowError,
- "new string is too long");
- return NULL;
- }
+ j = 0;
}
}
- if ((i + j) < 0) {
- PyErr_SetString(PyExc_OverflowError, "new string is too long");
- return NULL;
- }
+ if (i > PY_SSIZE_T_MAX - j)
+ goto overflow1;
/* Second pass: create output string and fill it */
u = _PyUnicode_New(i + j);
if (!u)
return NULL;
- j = 0;
- q = u->str;
+ j = 0; /* same as in first pass */
+ q = u->str; /* next output char */
+ qe = u->str + u->length; /* end of output */
for (p = self->str; p < e; p++)
if (*p == '\t') {
if (tabsize > 0) {
i = tabsize - (j % tabsize);
j += i;
- while (i--)
+ while (i--) {
+ if (q >= qe)
+ goto overflow2;
*q++ = ' ';
+ }
}
}
else {
- j++;
+ if (q >= qe)
+ goto overflow2;
*q++ = *p;
+ j++;
if (*p == '\n' || *p == '\r')
j = 0;
}
return (PyObject*) u;
+
+ overflow2:
+ Py_DECREF(u);
+ overflow1:
+ PyErr_SetString(PyExc_OverflowError, "new string is too long");
+ return NULL;
}
PyDoc_STRVAR(find__doc__,
diff --git a/PCbuild/_bsddb.vcproj b/PCbuild/_bsddb.vcproj
index a59c703..3efdcce 100644
--- a/PCbuild/_bsddb.vcproj
+++ b/PCbuild/_bsddb.vcproj
@@ -115,11 +115,11 @@
/>
<Tool
Name="VCPreLinkEventTool"
- CommandLine="cd $(bsddbDir)
if exist Debug_AMD64\libdb44sd.lib exit 0
vcbuild /useenv db_static.vcproj "Debug AMD64|Win32"
"
+ CommandLine="cd $(bsddbDir)
if exist "x64\Debug AMD64\db_static.lib" exit 0
vcbuild /useenv db_static.vcproj "Debug AMD64|x64"
"
/>
<Tool
Name="VCLinkerTool"
- AdditionalDependencies="$(bsddbDir)\Debug_AMD64\libdb44sd.lib"
+ AdditionalDependencies=""$(bsddbDir)x64\Debug AMD64\db_static.lib""
BaseAddress="0x1e180000"
/>
<Tool
@@ -242,11 +242,11 @@
/>
<Tool
Name="VCPreLinkEventTool"
- CommandLine="cd $(bsddbDir)
if exist Release_AMD64\libdb44s.lib exit 0
vcbuild /useenv db_static.vcproj "Release AMD64|Win32"
"
+ CommandLine="cd $(bsddbDir)
if exist x64\Release AMD64\db_static.lib exit 0
vcbuild /useenv db_static.vcproj "Release AMD64|Win32"
"
/>
<Tool
Name="VCLinkerTool"
- AdditionalDependencies="$(bsddbDir)\Release_AMD64\libdb44s.lib"
+ AdditionalDependencies="$(bsddbDir)x64\Release AMD64\db_static.lib"
BaseAddress="0x1e180000"
/>
<Tool
@@ -369,11 +369,11 @@
/>
<Tool
Name="VCPreLinkEventTool"
- CommandLine="cd $(bsddbDir)
if exist Release_AMD64\libdb44s.lib exit 0
vcbuild /useenv db_static.vcproj "Release AMD64|Win32"
"
+ CommandLine="cd $(bsddbDir)
if exist "x64\Release AMD64\db_static.lib" exit 0
vcbuild /useenv db_static.vcproj "Release AMD64|Win32"
"
/>
<Tool
Name="VCLinkerTool"
- AdditionalDependencies="$(bsddbDir)\Release_AMD64\libdb44s.lib"
+ AdditionalDependencies="$(bsddbDir)x64\Release AMD64\db_static.lib"
BaseAddress="0x1e180000"
TargetMachine="17"
/>
@@ -497,11 +497,11 @@
/>
<Tool
Name="VCPreLinkEventTool"
- CommandLine="cd $(bsddbDir)
if exist Release_AMD64\libdb44s.lib exit 0
vcbuild /useenv db_static.vcproj "Release AMD64|Win32"
"
+ CommandLine="cd $(bsddbDir)
if exist x64\Release AMD64\db_static.lib exit 0
vcbuild /useenv db_static.vcproj "Release AMD64|Win32"
"
/>
<Tool
Name="VCLinkerTool"
- AdditionalDependencies="$(bsddbDir)\Release_AMD64\libdb44s.lib"
+ AdditionalDependencies="$(bsddbDir)x64\Release AMD64\db_static.lib"
BaseAddress="0x1e180000"
TargetMachine="17"
/>
diff --git a/PCbuild/readme.txt b/PCbuild/readme.txt
index 4d2f9b6..6b04b92 100644
--- a/PCbuild/readme.txt
+++ b/PCbuild/readme.txt
@@ -202,7 +202,9 @@
The _bsddb subprojects depends only on the db_static project of
Berkeley DB. You have to choose either "Release", "Release AMD64", "Debug"
- or "Debug AMD64" as configuration.
+ or "Debug AMD64" as configuration. For the AND64 builds, you need to
+ create the "x64" platform first (in Solution Platforms\Configuration
+ Manager...)
Alternatively, if you want to start with the original sources,
go to Sleepycat's download page:
diff --git a/PCbuild/rt.bat b/PCbuild/rt.bat
index 8e386c5..583d4f3 100644
--- a/PCbuild/rt.bat
+++ b/PCbuild/rt.bat
@@ -1,11 +1,13 @@
@echo off
rem Run Tests. Run the regression test suite.
-rem Usage: rt [-d] [-O] [-q] regrtest_args
+rem Usage: rt [-d] [-O] [-q] [-x64] regrtest_args
rem -d Run Debug build (python_d.exe). Else release build.
rem -O Run python.exe or python_d.exe (see -d) with -O.
rem -q "quick" -- normally the tests are run twice, the first time
rem after deleting all the .py[co] files reachable from Lib/.
rem -q runs the tests just once, and without deleting .py[co] files.
+rem -x64 Run the 64-bit build of python (or python_d if -d was specified)
+rem from the 'amd64' dir instead of the 32-bit build in this dir.
rem All leading instances of these switches are shifted off, and
rem whatever remains is passed to regrtest.py. For example,
rem rt -O -d -x test_thread
@@ -24,16 +26,20 @@
setlocal
-set exe=python
+set prefix=.\
+set suffix=
set qmode=
set dashO=
-PATH %PATH%;..\..\tcltk\bin
+set tcltk=
:CheckOpts
if "%1"=="-O" (set dashO=-O) & shift & goto CheckOpts
if "%1"=="-q" (set qmode=yes) & shift & goto CheckOpts
-if "%1"=="-d" (set exe=python_d) & shift & goto CheckOpts
+if "%1"=="-d" (set suffix=_d) & shift & goto CheckOpts
+if "%1"=="-x64" (set prefix=amd64) & (set tcltk=tcltk64) & shift & goto CheckOpts
+PATH %PATH%;..\..\%tcltk%\bin
+set exe=%prefix%\python%suffix%
set cmd=%exe% %dashO% -E -tt ../lib/test/regrtest.py %1 %2 %3 %4 %5 %6 %7 %8 %9
if defined qmode goto Qmode
diff --git a/Python/ast.c b/Python/ast.c
index 8b68182..d5d84f7 100644
--- a/Python/ast.c
+++ b/Python/ast.c
@@ -1994,10 +1994,14 @@
}
else if (TYPE(ch) == STAR) {
vararg = ast_for_expr(c, CHILD(n, i+1));
+ if (!vararg)
+ return NULL;
i++;
}
else if (TYPE(ch) == DOUBLESTAR) {
kwarg = ast_for_expr(c, CHILD(n, i+1));
+ if (!kwarg)
+ return NULL;
i++;
}
}
diff --git a/Python/ceval.c b/Python/ceval.c
index ec6d4e3..bac8278 100644
--- a/Python/ceval.c
+++ b/Python/ceval.c
@@ -2021,17 +2021,20 @@
case WITH_CLEANUP:
{
- /* TOP is the context.__exit__ bound method.
- Below that are 1-3 values indicating how/why
- we entered the finally clause:
- - SECOND = None
- - (SECOND, THIRD) = (WHY_{RETURN,CONTINUE}), retval
- - SECOND = WHY_*; no retval below it
- - (SECOND, THIRD, FOURTH) = exc_info()
+ /* At the top of the stack are 1-3 values indicating
+ how/why we entered the finally clause:
+ - TOP = None
+ - (TOP, SECOND) = (WHY_{RETURN,CONTINUE}), retval
+ - TOP = WHY_*; no retval below it
+ - (TOP, SECOND, THIRD) = exc_info()
+ Below them is EXIT, the context.__exit__ bound method.
In the last case, we must call
- TOP(SECOND, THIRD, FOURTH)
+ EXIT(TOP, SECOND, THIRD)
otherwise we must call
- TOP(None, None, None)
+ EXIT(None, None, None)
+
+ In all cases, we remove EXIT from the stack, leaving
+ the rest in the same order.
In addition, if the stack represents an exception,
*and* the function call returns a 'true' value, we
@@ -2040,36 +2043,59 @@
should still be resumed.)
*/
- x = TOP();
- u = SECOND();
- if (PyLong_Check(u) || u == Py_None) {
+ PyObject *exit_func;
+
+ u = POP();
+ if (u == Py_None) {
+ exit_func = TOP();
+ SET_TOP(u);
+ v = w = Py_None;
+ }
+ else if (PyLong_Check(u)) {
+ switch(PyLong_AS_LONG(u)) {
+ case WHY_RETURN:
+ case WHY_CONTINUE:
+ /* Retval in TOP. */
+ exit_func = SECOND();
+ SET_SECOND(TOP());
+ SET_TOP(u);
+ break;
+ default:
+ exit_func = TOP();
+ SET_TOP(u);
+ break;
+ }
u = v = w = Py_None;
}
else {
- v = THIRD();
- w = FOURTH();
+ v = TOP();
+ w = SECOND();
+ exit_func = THIRD();
+ SET_TOP(u);
+ SET_SECOND(v);
+ SET_THIRD(w);
}
/* XXX Not the fastest way to call it... */
- x = PyObject_CallFunctionObjArgs(x, u, v, w, NULL);
- if (x == NULL)
+ x = PyObject_CallFunctionObjArgs(exit_func, u, v, w,
+ NULL);
+ if (x == NULL) {
+ Py_DECREF(exit_func);
break; /* Go to error exit */
+ }
if (u != Py_None && PyObject_IsTrue(x)) {
/* There was an exception and a true return */
- Py_DECREF(x);
- x = TOP(); /* Again */
- STACKADJ(-3);
+ STACKADJ(-2);
Py_INCREF(Py_None);
SET_TOP(Py_None);
- Py_DECREF(x);
Py_DECREF(u);
Py_DECREF(v);
Py_DECREF(w);
} else {
- /* Let END_FINALLY do its thing */
- Py_DECREF(x);
- x = POP();
- Py_DECREF(x);
+ /* The stack was rearranged to remove EXIT
+ above. Let END_FINALLY do its thing */
}
+ Py_DECREF(x);
+ Py_DECREF(exit_func);
PREDICT(END_FINALLY);
break;
}
diff --git a/Python/compile.c b/Python/compile.c
index f415519..6ad3822 100644
--- a/Python/compile.c
+++ b/Python/compile.c
@@ -3092,7 +3092,7 @@
{
static identifier enter_attr, exit_attr;
basicblock *block, *finally;
- identifier tmpexit, tmpvalue = NULL;
+ identifier tmpvalue = NULL;
assert(s->kind == With_kind);
@@ -3112,12 +3112,6 @@
if (!block || !finally)
return 0;
- /* Create a temporary variable to hold context.__exit__ */
- tmpexit = compiler_new_tmpname(c);
- if (tmpexit == NULL)
- return 0;
- PyArena_AddPyObject(c->c_arena, tmpexit);
-
if (s->v.With.optional_vars) {
/* Create a temporary variable to hold context.__enter__().
We need to do this rather than preserving it on the stack
@@ -3137,11 +3131,10 @@
/* Evaluate EXPR */
VISIT(c, expr, s->v.With.context_expr);
- /* Squirrel away context.__exit__ */
+ /* Squirrel away context.__exit__ by stuffing it under context */
ADDOP(c, DUP_TOP);
ADDOP_O(c, LOAD_ATTR, exit_attr, names);
- if (!compiler_nameop(c, tmpexit, Store))
- return 0;
+ ADDOP(c, ROT_TWO);
/* Call context.__enter__() */
ADDOP_O(c, LOAD_ATTR, enter_attr, names);
@@ -3185,10 +3178,9 @@
if (!compiler_push_fblock(c, FINALLY_END, finally))
return 0;
- /* Finally block starts; push tmpexit and issue our magic opcode. */
- if (!compiler_nameop(c, tmpexit, Load) ||
- !compiler_nameop(c, tmpexit, Del))
- return 0;
+ /* Finally block starts; context.__exit__ is on the stack under
+ the exception or return information. Just issue our magic
+ opcode. */
ADDOP(c, WITH_CLEANUP);
/* Finally block ends. */
diff --git a/Python/import.c b/Python/import.c
index 7dab46e..8f83410 100644
--- a/Python/import.c
+++ b/Python/import.c
@@ -72,6 +72,7 @@
storing constants that should have been removed)
Python 2.5c2: 62131 (fix wrong code: for x, in ... in listcomp/genexp)
Python 2.6a0: 62151 (peephole optimizations and STORE_MAP opcode)
+ Python 2.6a1: 62161 (WITH_CLEANUP optimization)
Python 3000: 3000
3010 (removed UNARY_CONVERT)
3020 (added BUILD_SET)
@@ -84,9 +85,9 @@
3090 (kill str8 interning)
3100 (merge from 2.6a0, see 62151)
3102 (__file__ points to source file)
-.
+ Python 3.0a4: 3110 (WITH_CLEANUP optimization).
*/
-#define MAGIC (3102 | ((long)'\r'<<16) | ((long)'\n'<<24))
+#define MAGIC (3110 | ((long)'\r'<<16) | ((long)'\n'<<24))
/* Magic word as global; note that _PyImport_Init() can change the
value of this global to accommodate for alterations of how the
diff --git a/README b/README
index ad51d13..ecc0bea 100644
--- a/README
+++ b/README
@@ -61,6 +61,9 @@
Please help write it!
+If you want to install multiple versions of Python see the section below
+entitled "Installing multiple versions".
+
What's New Since 3.0a1
----------------------
@@ -83,6 +86,29 @@
deprecated features are used, and backported versions of certain key
Python 3000 features.
+
+Installing multiple versions
+----------------------------
+
+On Unix and Mac systems if you intend to install multiple versions of Python
+using the same installation prefix (--prefix argument to the configure
+script) you must take care that your primary python executable is not
+overwritten by the installation of a different versio. All files and
+directories installed using "make altinstall" contain the major and minor
+version and can thus live side-by-side. "make install" also creates
+${prefix}/bin/python which refers to ${prefix}/bin/pythonX.Y. If you intend
+to install multiple versions using the same prefix you must decide which
+version (if any) is your "primary" version. Install that version using
+"make install". Install all other versions using "make altinstall".
+
+For example, if you want to install Python 2.5, 2.6 and 3.0 with 2.6 being
+the primary version, you would execute "make install" in your 2.6 build
+directory and "make altinstall" in the others.
+
+
+Configuration options and variables
+-----------------------------------
+
A source-to-source translation tool, "2to3", can take care of the
mundane task of converting large amounts of source code. It is not a
complete solution but is complemented by the deprecation warnings in
diff --git a/Tools/buildbot/clean.bat b/Tools/buildbot/clean.bat
index 15d7365..ec71804 100644
--- a/Tools/buildbot/clean.bat
+++ b/Tools/buildbot/clean.bat
@@ -1,7 +1,7 @@
@rem Used by the buildbot "clean" step.
call "%VS90COMNTOOLS%vsvars32.bat"
-cd PCbuild
@echo Deleting .pyc/.pyo files ...
del /s Lib\*.pyc Lib\*.pyo
+cd PCbuild
vcbuild /clean pcbuild.sln "Release|Win32"
vcbuild /clean pcbuild.sln "Debug|Win32"
diff --git a/Tools/buildbot/external-amd64.bat b/Tools/buildbot/external-amd64.bat
index 3e5c859..0ea4d64 100644
--- a/Tools/buildbot/external-amd64.bat
+++ b/Tools/buildbot/external-amd64.bat
@@ -10,10 +10,15 @@
if not exist bzip2-1.0.3 svn export http://svn.python.org/projects/external/bzip2-1.0.3
@rem Sleepycat db
-if not exist db-4.4.20 svn export http://svn.python.org/projects/external/db-4.4.20
-@REM if not exist db-4.4.20\build_win32\debug\libdb44sd.lib (
-@REM vcbuild db-4.4.20\build_win32\Berkeley_DB.sln /build Debug /project db_static
-@REM )
+@rem Remove VS 2003 builds
+if exist db-4.4.20 if not exist db-4.4.20\build_win32\this_is_for_vs9 (
+ echo Removing old build
+ rd /s/q db-4.4.20
+)
+if not exist db-4.4.20 svn export http://svn.python.org/projects/external/db-4.4.20-vs9 db-4.4.20
+if not exist db-4.4.20\build_win32\debug\libdb44sd.lib (
+ vcbuild db-4.4.20\build_win32\db_static.vcproj "Debug AMD64|x64"
+)
@rem OpenSSL
if not exist openssl-0.9.8g (
diff --git a/Tools/buildbot/test-amd64.bat b/Tools/buildbot/test-amd64.bat
index 9cb6968..d178c92 100644
--- a/Tools/buildbot/test-amd64.bat
+++ b/Tools/buildbot/test-amd64.bat
@@ -1,3 +1,3 @@
@rem Used by the buildbot "test" step.
-cd PC\VS7.1
-call rt.bat -q -uall -rw
+cd PCbuild
+call rt.bat -q -d -x64 -uall -rw
diff --git a/Tools/pybench/Setup.py b/Tools/pybench/Setup.py
index f1417e6..21e654a 100644
--- a/Tools/pybench/Setup.py
+++ b/Tools/pybench/Setup.py
@@ -30,6 +30,10 @@
from Tuples import *
from Dict import *
from Exceptions import *
+try:
+ from With import *
+except SyntaxError:
+ pass
from Imports import *
from Strings import *
from Numbers import *
diff --git a/Tools/pybench/pybench.py b/Tools/pybench/pybench.py
index dd398f5..624347f 100755
--- a/Tools/pybench/pybench.py
+++ b/Tools/pybench/pybench.py
@@ -121,7 +121,8 @@
'platform': platform.platform(),
'processor': platform.processor(),
'executable': sys.executable,
- 'implementation': platform.python_implementation(),
+ 'implementation': getattr(platform, 'python_implementation',
+ lambda:'n/a')(),
'python': platform.python_version(),
'compiler': platform.python_compiler(),
'buildno': buildno,
@@ -833,7 +834,7 @@
print('PYBENCH %s' % __version__)
print('-' * LINE)
print('* using %s %s' % (
- platform.python_implementation(),
+ getattr(platform, 'python_implementation', lambda:'Python')(),
' '.join(sys.version.split())))
# Switch off garbage collection