README - platform/external/python/cpython3 - Gitiles

 This is Python version 3.5.1
 ============================

 Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
 2012, 2013, 2014, 2015, 2016 Python Software Foundation.  All rights reserved.

 Python 3.x is a new version of the language, which is incompatible with the
 2.x line of releases.  The language is mostly the same, but many details,
 especially how built-in objects like dictionaries and strings work,
 have changed considerably, and a lot of deprecated features have finally
 been removed.


 Build Instructions
 ------------------

 On Unix, Linux, BSD, OSX, and Cygwin:

     ./configure
     make
     make test
     sudo make install

 This will install Python as python3.

 You can pass many options to the configure script; run "./configure --help" to
 find out more.  On OSX and Cygwin, the executable is called python.exe;
 elsewhere it's just python.

 On Mac OS X, if you have configured Python with --enable-framework, you should
 use "make frameworkinstall" to do the installation.  Note that this installs
 the Python executable in a place that is not normally on your PATH, you may
 want to set up a symlink in /usr/local/bin.

 On Windows, see PCbuild/readme.txt.

 If you wish, you can create a subdirectory and invoke configure from there.
 For example:

     mkdir debug
     cd debug
     ../configure --with-pydebug
     make
     make test

 (This will fail if you *also* built at the top-level directory.
 You should do a "make clean" at the toplevel first.)

 If you need an optimized version of Python, you type "make profile-opt" in the
 top level directory. This will rebuild the interpreter executable using Profile
 Guided Optimization (PGO). For more details, see the section bellow.


 Profile Guided Optimization
 ---------------------------

 PGO takes advantage of recent versions of the GCC or Clang compilers.
 If ran, the "profile-opt" rule will do several steps.

 First, the entire Python directory is cleaned of temporary files that
 may resulted in a previous compilation.

 Then, an instrumented version of the interpreter is built, using suitable
 compiler flags for each flavour. Note that this is just an intermediary
 step and the binary resulted after this step is not good for real life
 workloads, as it has profiling instructions embedded inside.

 After this instrumented version of the interpreter is built, the Makefile
 will automatically run a training workload. This is necessary in order to
 profile the interpreter execution. Note also that any output, both stdout
 and stderr, that may appear at this step is supressed.

 Finally, the last step is to rebuild the interpreter, using the information
 collected in the previous one. The end result will be a the Python binary
 that is optimized and suitable for distribution or production installation.


 What's New
 ----------

 We have a comprehensive overview of the changes in the "What's New in
 Python 3.5" document, found at

     http://docs.python.org/3.5/whatsnew/3.5.html

 For a more detailed change log, read Misc/NEWS (though this file, too,
 is incomplete, and also doesn't list anything merged in from the 2.7
 release under development).

 If you want to install multiple versions of Python see the section below
 entitled "Installing multiple versions".


 Documentation
 -------------

 Documentation for Python 3.5 is online, updated daily:

     http://docs.python.org/3.5/

 It can also be downloaded in many formats for faster access.  The documentation
 is downloadable in HTML, PDF, and reStructuredText formats; the latter version
 is primarily for documentation authors, translators, and people with special
 formatting requirements.

 If you would like to contribute to the development of Python, relevant
 documentation is available at:

     http://docs.python.org/devguide/

 For information about building Python's documentation, refer to Doc/README.txt.


 Converting From Python 2.x to 3.x
 ---------------------------------

 Python starting with 2.6 contains features to help locating code that needs to
 be changed, such as optional warnings when deprecated features are used, and
 backported versions of certain key Python 3.x features.

 A source-to-source translation tool, "2to3", can take care of the mundane task
 of converting large amounts of source code.  It is not a complete solution but
 is complemented by the deprecation warnings in 2.6.  See
 http://docs.python.org/3.5/library/2to3.html for more information.


 Testing
 -------

 To test the interpreter, type "make test" in the top-level directory.
 The test set produces some output.  You can generally ignore the messages
 about skipped tests due to optional features which can't be imported.
 If a message is printed about a failed test or a traceback or core dump
 is produced, something is wrong.

 By default, tests are prevented from overusing resources like disk space and
 memory.  To enable these tests, run "make testall".

 IMPORTANT: If the tests fail and you decide to mail a bug report, *don't*
 include the output of "make test".  It is useless.  Run the failing test
 manually, as follows:

         ./python -m test -v test_whatever

 (substituting the top of the source tree for '.' if you built in a different
 directory).  This runs the test in verbose mode.


 Installing multiple versions
 ----------------------------

 On Unix and Mac systems if you intend to install multiple versions of Python
 using the same installation prefix (--prefix argument to the configure script)
 you must take care that your primary python executable is not overwritten by
 the installation of a different version.  All files and directories installed
 using "make altinstall" contain the major and minor version and can thus live
 side-by-side.  "make install" also creates ${prefix}/bin/python3 which refers
 to ${prefix}/bin/pythonX.Y.  If you intend to install multiple versions using
 the same prefix you must decide which version (if any) is your "primary"
 version.  Install that version using "make install".  Install all other
 versions using "make altinstall".

 For example, if you want to install Python 2.6, 2.7 and 3.5 with 2.7 being the
 primary version, you would execute "make install" in your 2.7 build directory
 and "make altinstall" in the others.


 Issue Tracker and Mailing List
 ------------------------------

 We're soliciting bug reports about all aspects of the language.  Fixes are also
 welcome, preferably in unified diff format.  Please use the issue tracker:

     http://bugs.python.org/

 If you're not sure whether you're dealing with a bug or a feature, use the
 mailing list:

     python-dev@python.org

 To subscribe to the list, use the mailman form:

     http://mail.python.org/mailman/listinfo/python-dev/


 Proposals for enhancement
 -------------------------

 If you have a proposal to change Python, you may want to send an email to the
 comp.lang.python or python-ideas mailing lists for inital feedback.  A Python
 Enhancement Proposal (PEP) may be submitted if your idea gains ground.  All
 current PEPs, as well as guidelines for submitting a new PEP, are listed at
 http://www.python.org/dev/peps/.


 Release Schedule
 ----------------

 See PEP 478 for release details: http://www.python.org/dev/peps/pep-0478/


 Copyright and License Information
 ---------------------------------

 Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
 2012, 2013, 2014, 2015, 2016 Python Software Foundation.  All rights reserved.

 Copyright (c) 2000 BeOpen.com.  All rights reserved.

 Copyright (c) 1995-2001 Corporation for National Research Initiatives.  All
 rights reserved.

 Copyright (c) 1991-1995 Stichting Mathematisch Centrum.  All rights reserved.

 See the file "LICENSE" for information on the history of this software,
 terms & conditions for usage, and a DISCLAIMER OF ALL WARRANTIES.

 This Python distribution contains *no* GNU General Public License (GPL) code,
 so it may be used in proprietary projects.  There are interfaces to some GNU
 code but these are entirely optional.

 All trademarks referenced herein are property of their respective holders.
	This is Python version 3.5.1
	============================

	Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
	2012, 2013, 2014, 2015, 2016 Python Software Foundation. All rights reserved.

	Python 3.x is a new version of the language, which is incompatible with the
	2.x line of releases. The language is mostly the same, but many details,
	especially how built-in objects like dictionaries and strings work,
	have changed considerably, and a lot of deprecated features have finally
	been removed.


	Build Instructions
	------------------

	On Unix, Linux, BSD, OSX, and Cygwin:

	./configure
	make
	make test
	sudo make install

	This will install Python as python3.

	You can pass many options to the configure script; run "./configure --help" to
	find out more. On OSX and Cygwin, the executable is called python.exe;
	elsewhere it's just python.

	On Mac OS X, if you have configured Python with --enable-framework, you should
	use "make frameworkinstall" to do the installation. Note that this installs
	the Python executable in a place that is not normally on your PATH, you may
	want to set up a symlink in /usr/local/bin.

	On Windows, see PCbuild/readme.txt.

	If you wish, you can create a subdirectory and invoke configure from there.
	For example:

	mkdir debug
	cd debug
	../configure --with-pydebug
	make
	make test

	(This will fail if you also built at the top-level directory.
	You should do a "make clean" at the toplevel first.)

	If you need an optimized version of Python, you type "make profile-opt" in the
	top level directory. This will rebuild the interpreter executable using Profile
	Guided Optimization (PGO). For more details, see the section bellow.


	Profile Guided Optimization
	---------------------------

	PGO takes advantage of recent versions of the GCC or Clang compilers.
	If ran, the "profile-opt" rule will do several steps.

	First, the entire Python directory is cleaned of temporary files that
	may resulted in a previous compilation.

	Then, an instrumented version of the interpreter is built, using suitable
	compiler flags for each flavour. Note that this is just an intermediary
	step and the binary resulted after this step is not good for real life
	workloads, as it has profiling instructions embedded inside.

	After this instrumented version of the interpreter is built, the Makefile
	will automatically run a training workload. This is necessary in order to
	profile the interpreter execution. Note also that any output, both stdout
	and stderr, that may appear at this step is supressed.

	Finally, the last step is to rebuild the interpreter, using the information
	collected in the previous one. The end result will be a the Python binary
	that is optimized and suitable for distribution or production installation.


	What's New
	----------

	We have a comprehensive overview of the changes in the "What's New in
	Python 3.5" document, found at

	http://docs.python.org/3.5/whatsnew/3.5.html

	For a more detailed change log, read Misc/NEWS (though this file, too,
	is incomplete, and also doesn't list anything merged in from the 2.7
	release under development).

	If you want to install multiple versions of Python see the section below
	entitled "Installing multiple versions".


	Documentation
	-------------

	Documentation for Python 3.5 is online, updated daily:

	http://docs.python.org/3.5/

	It can also be downloaded in many formats for faster access. The documentation
	is downloadable in HTML, PDF, and reStructuredText formats; the latter version
	is primarily for documentation authors, translators, and people with special
	formatting requirements.

	If you would like to contribute to the development of Python, relevant
	documentation is available at:

	http://docs.python.org/devguide/

	For information about building Python's documentation, refer to Doc/README.txt.


	Converting From Python 2.x to 3.x
	---------------------------------

	Python starting with 2.6 contains features to help locating code that needs to
	be changed, such as optional warnings when deprecated features are used, and
	backported versions of certain key Python 3.x features.

	A source-to-source translation tool, "2to3", can take care of the mundane task
	of converting large amounts of source code. It is not a complete solution but
	is complemented by the deprecation warnings in 2.6. See
	http://docs.python.org/3.5/library/2to3.html for more information.


	Testing
	-------

	To test the interpreter, type "make test" in the top-level directory.
	The test set produces some output. You can generally ignore the messages
	about skipped tests due to optional features which can't be imported.
	If a message is printed about a failed test or a traceback or core dump
	is produced, something is wrong.

	By default, tests are prevented from overusing resources like disk space and
	memory. To enable these tests, run "make testall".

	IMPORTANT: If the tests fail and you decide to mail a bug report, don't
	include the output of "make test". It is useless. Run the failing test
	manually, as follows:

	./python -m test -v test_whatever

	(substituting the top of the source tree for '.' if you built in a different
	directory). This runs the test in verbose mode.


	Installing multiple versions
	----------------------------

	On Unix and Mac systems if you intend to install multiple versions of Python
	using the same installation prefix (--prefix argument to the configure script)
	you must take care that your primary python executable is not overwritten by
	the installation of a different version. All files and directories installed
	using "make altinstall" contain the major and minor version and can thus live
	side-by-side. "make install" also creates ${prefix}/bin/python3 which refers
	to ${prefix}/bin/pythonX.Y. If you intend to install multiple versions using
	the same prefix you must decide which version (if any) is your "primary"
	version. Install that version using "make install". Install all other
	versions using "make altinstall".

	For example, if you want to install Python 2.6, 2.7 and 3.5 with 2.7 being the
	primary version, you would execute "make install" in your 2.7 build directory
	and "make altinstall" in the others.


	Issue Tracker and Mailing List
	------------------------------

	We're soliciting bug reports about all aspects of the language. Fixes are also
	welcome, preferably in unified diff format. Please use the issue tracker:

	http://bugs.python.org/

	If you're not sure whether you're dealing with a bug or a feature, use the
	mailing list:

	python-dev@python.org

	To subscribe to the list, use the mailman form:

	http://mail.python.org/mailman/listinfo/python-dev/


	Proposals for enhancement
	-------------------------

	If you have a proposal to change Python, you may want to send an email to the
	comp.lang.python or python-ideas mailing lists for inital feedback. A Python
	Enhancement Proposal (PEP) may be submitted if your idea gains ground. All
	current PEPs, as well as guidelines for submitting a new PEP, are listed at
	http://www.python.org/dev/peps/.


	Release Schedule
	----------------

	See PEP 478 for release details: http://www.python.org/dev/peps/pep-0478/


	Copyright and License Information
	---------------------------------

	Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
	2012, 2013, 2014, 2015, 2016 Python Software Foundation. All rights reserved.

	Copyright (c) 2000 BeOpen.com. All rights reserved.

	Copyright (c) 1995-2001 Corporation for National Research Initiatives. All
	rights reserved.

	Copyright (c) 1991-1995 Stichting Mathematisch Centrum. All rights reserved.

	See the file "LICENSE" for information on the history of this software,
	terms & conditions for usage, and a DISCLAIMER OF ALL WARRANTIES.

	This Python distribution contains no GNU General Public License (GPL) code,
	so it may be used in proprietary projects. There are interfaces to some GNU
	code but these are entirely optional.

	All trademarks referenced herein are property of their respective holders.