diff --git a/Doc/library/base64.rst b/Doc/library/base64.rst
index 68a941f..35b61ae 100644
--- a/Doc/library/base64.rst
+++ b/Doc/library/base64.rst
@@ -21,8 +21,7 @@
 interface provides for encoding and decoding to and from file-like objects as
 well as strings, but only using the Base64 standard alphabet.
 
-The modern interface, which was introduced in Python 2.4, provides:
-
+The modern interface provides:
 
 .. function:: b64encode(s[, altchars])
 
diff --git a/Doc/library/codeop.rst b/Doc/library/codeop.rst
index 456f6dd..97b6267 100644
--- a/Doc/library/codeop.rst
+++ b/Doc/library/codeop.rst
@@ -66,28 +66,3 @@
    :func:`compile_command`; the difference is that if the instance compiles program
    text containing a ``__future__`` statement, the instance 'remembers' and
    compiles all subsequent program texts with the statement in force.
-
-A note on version compatibility: the :class:`Compile` and
-:class:`CommandCompiler` are new in Python 2.2.  If you want to enable the
-future-tracking features of 2.2 but also retain compatibility with 2.1 and
-earlier versions of Python you can either write ::
-
-   try:
-       from codeop import CommandCompiler
-       compile_command = CommandCompiler()
-       del CommandCompiler
-   except ImportError:
-       from codeop import compile_command
-
-which is a low-impact change, but introduces possibly unwanted global state into
-your program, or you can write::
-
-   try:
-       from codeop import CommandCompiler
-   except ImportError:
-       def CommandCompiler():
-           from codeop import compile_command
-           return compile_command
-
-and then call ``CommandCompiler`` every time you need a fresh compiler object.
-
diff --git a/Doc/library/cookielib.rst b/Doc/library/cookielib.rst
index f6008f1..c8e7298 100644
--- a/Doc/library/cookielib.rst
+++ b/Doc/library/cookielib.rst
@@ -38,12 +38,7 @@
 .. exception:: LoadError
 
    Instances of :class:`FileCookieJar` raise this exception on failure to load
-   cookies from a file.
-
-   .. note::
-
-      For backwards-compatibility with Python 2.4 (which raised an :exc:`IOError`),
-      :exc:`LoadError` is a subclass of :exc:`IOError`.
+   cookies from a file.  :exc:`LoadError` is a subclass of :exc:`IOError`.
 
 
 The following classes are provided:
@@ -266,11 +261,6 @@
    :exc:`LoadError` will be raised.  Also, :exc:`IOError` may be raised, for
    example if the file does not exist.
 
-   .. note::
-
-      For backwards-compatibility with Python 2.4 (which raised an :exc:`IOError`),
-      :exc:`LoadError` is a subclass of :exc:`IOError`.
-
 
 .. method:: FileCookieJar.revert(filename=None, ignore_discard=False, ignore_expires=False)
 
diff --git a/Doc/library/ctypes.rst b/Doc/library/ctypes.rst
index 6968f42..5efa548 100644
--- a/Doc/library/ctypes.rst
+++ b/Doc/library/ctypes.rst
@@ -1957,7 +1957,6 @@
       is zero.  If the source buffer is not large enough a ValueError
       is raised.
 
-      .. versionadded:: 2.6
 
    .. method:: _CData.from_buffer_copy(source[, offset])
 
@@ -1967,8 +1966,6 @@
       in bytes; the default is zero.  If the source buffer is not
       large enough a ValueError is raised.
 
-      .. versionadded:: 2.6
-
 
    .. method:: from_address(address)
 
diff --git a/Doc/library/decimal.rst b/Doc/library/decimal.rst
index b7dd32f..7052c7b 100644
--- a/Doc/library/decimal.rst
+++ b/Doc/library/decimal.rst
@@ -766,9 +766,8 @@
 
    Set the current context for the active thread to *c*.
 
-Beginning with Python 2.5, you can also use the :keyword:`with` statement and
-the :func:`localcontext` function to temporarily change the active context.
-
+You can also use the :keyword:`with` statement and the :func:`localcontext`
+function to temporarily change the active context.
 
 .. function:: localcontext([c])
 
diff --git a/Doc/library/difflib.rst b/Doc/library/difflib.rst
index 01c9c85..00f273e 100644
--- a/Doc/library/difflib.rst
+++ b/Doc/library/difflib.rst
@@ -201,14 +201,13 @@
    Optional keyword parameters *linejunk* and *charjunk* are for filter functions
    (or ``None``):
 
-   *linejunk*: A function that accepts a single string argument, and returns true
-   if the string is junk, or false if not. The default is (``None``), starting with
-   Python 2.3.  Before then, the default was the module-level function
-   :func:`IS_LINE_JUNK`, which filters out lines without visible characters, except
-   for at most one pound character (``'#'``). As of Python 2.3, the underlying
-   :class:`SequenceMatcher` class does a dynamic analysis of which lines are so
-   frequent as to constitute noise, and this usually works better than the pre-2.3
-   default.
+   *linejunk*: A function that accepts a single string argument, and returns
+   true if the string is junk, or false if not. The default is ``None``. There
+   is also a module-level function :func:`IS_LINE_JUNK`, which filters out lines
+   without visible characters, except for at most one pound character (``'#'``)
+   -- however the underlying :class:`SequenceMatcher` class does a dynamic
+   analysis of which lines are so frequent as to constitute noise, and this
+   usually works better than using this function.
 
    *charjunk*: A function that accepts a character (a string of length 1), and
    returns if the character is junk, or false if not. The default is module-level
@@ -302,7 +301,7 @@
 
    Return true for ignorable lines.  The line *line* is ignorable if *line* is
    blank or contains a single ``'#'``, otherwise it is not ignorable.  Used as a
-   default for parameter *linejunk* in :func:`ndiff` before Python 2.3.
+   default for parameter *linejunk* in :func:`ndiff` in older versions.
 
 
 .. function:: IS_CHARACTER_JUNK(ch)
diff --git a/Doc/library/fcntl.rst b/Doc/library/fcntl.rst
index 7244e7b..0e69407 100644
--- a/Doc/library/fcntl.rst
+++ b/Doc/library/fcntl.rst
@@ -65,7 +65,7 @@
    so long as the buffer you pass is as least as long as what the operating system
    wants to put there, things should work.
 
-   If *mutate_flag* is true, then the buffer is (in effect) passed to the
+   If *mutate_flag* is true (the default), then the buffer is (in effect) passed to the
    underlying :func:`ioctl` system call, the latter's return code is passed back to
    the calling Python, and the buffer's new contents reflect the action of the
    :func:`ioctl`.  This is a slight simplification, because if the supplied buffer
@@ -73,10 +73,6 @@
    long which is then passed to :func:`ioctl` and copied back into the supplied
    buffer.
 
-   If *mutate_flag* is not supplied, then from Python 2.5 it defaults to true,
-   which is a change from versions 2.3 and 2.4. Supply the argument explicitly if
-   version portability is a priority.
-
    An example::
 
       >>> import array, fcntl, struct, termios, os
diff --git a/Doc/library/ftplib.rst b/Doc/library/ftplib.rst
index 4ce8893..41bdcd8 100644
--- a/Doc/library/ftplib.rst
+++ b/Doc/library/ftplib.rst
@@ -187,9 +187,8 @@
 
 .. method:: FTP.set_pasv(boolean)
 
-   Enable "passive" mode if *boolean* is true, other disable passive mode.  (In
-   Python 2.0 and before, passive mode was off by default; in Python 2.1 and later,
-   it is on by default.)
+   Enable "passive" mode if *boolean* is true, other disable passive mode.
+   Passive mode is on by default.
 
 
 .. method:: FTP.storbinary(command, file[, blocksize, callback])
diff --git a/Doc/library/getpass.rst b/Doc/library/getpass.rst
index 91c811b..ff1c091 100644
--- a/Doc/library/getpass.rst
+++ b/Doc/library/getpass.rst
@@ -12,11 +12,11 @@
 
 .. function:: getpass([prompt[, stream]])
 
-   Prompt the user for a password without echoing.  The user is prompted using the
-   string *prompt*, which defaults to ``'Password: '``. On Unix, the prompt is
-   written to the file-like object *stream*.  *stream* defaults to the
-   controlling terminal (/dev/tty) or if that is unavailable to ``sys.stderr``
-   (this argument is ignored on Windows).
+   Prompt the user for a password without echoing.  The user is prompted using
+   the string *prompt*, which defaults to ``'Password: '``.  On Unix, the prompt
+   is written to the file-like object *stream*.  *stream* defaults to the
+   controlling terminal (:file:`/dev/tty`) or if that is unavailable to
+   ``sys.stderr`` (this argument is ignored on Windows).
 
    If echo free input is unavailable getpass() falls back to printing
    a warning message to *stream* and reading from ``sys.stdin`` and
@@ -24,9 +24,6 @@
 
    Availability: Macintosh, Unix, Windows.
 
-   .. versionchanged:: 2.6
-      On Unix it defaults to using /dev/tty before falling back
-      to ``sys.stdin`` and ``sys.stderr``.
    .. note::
       If you call getpass from within IDLE, the input may be done in the
       terminal you launched IDLE from rather than the idle window itself.
diff --git a/Doc/library/inspect.rst b/Doc/library/inspect.rst
index d622e1d..7ef5d3f 100644
--- a/Doc/library/inspect.rst
+++ b/Doc/library/inspect.rst
@@ -273,10 +273,10 @@
    Return true if the object is a method descriptor, but not if :func:`ismethod`
    or :func:`isclass` or :func:`isfunction` are true.
 
-   This is new as of Python 2.2, and, for example, is true of
-   ``int.__add__``. An object passing this test has a :attr:`__get__` attribute
-   but not a :attr:`__set__` attribute, but beyond that the set of attributes
-   varies.  :attr:`__name__` is usually sensible, and :attr:`__doc__` often is.
+   This, for example, is true of ``int.__add__``.  An object passing this test
+   has a :attr:`__get__` attribute but not a :attr:`__set__` attribute, but
+   beyond that the set of attributes varies.  :attr:`__name__` is usually
+   sensible, and :attr:`__doc__` often is.
 
    Methods implemented via descriptors that also pass one of the other tests
    return false from the :func:`ismethoddescriptor` test, simply because the
diff --git a/Doc/library/json.rst b/Doc/library/json.rst
index a0a62d1..79430c3 100644
--- a/Doc/library/json.rst
+++ b/Doc/library/json.rst
@@ -5,7 +5,6 @@
    :synopsis: Encode and decode the JSON format.
 .. moduleauthor:: Bob Ippolito <bob@redivi.com>
 .. sectionauthor:: Bob Ippolito <bob@redivi.com>
-.. versionadded:: 2.6
 
 JSON (JavaScript Object Notation) <http://json.org> is a subset of JavaScript
 syntax (ECMA-262 3rd edition) used as a lightweight data interchange format.
diff --git a/Doc/library/macos.rst b/Doc/library/macos.rst
index 543f868..0eb7225 100644
--- a/Doc/library/macos.rst
+++ b/Doc/library/macos.rst
@@ -16,9 +16,7 @@
 
 .. data:: runtimemodel
 
-   Always ``'macho'``, from Python 2.4 on. In earlier versions of Python the value
-   could also be ``'ppc'`` for the classic Mac OS 8 runtime model or ``'carbon'``
-   for the Mac OS 9 runtime model.
+   Always ``'macho'``.
 
 
 .. data:: linkmodel
diff --git a/Doc/library/markup.rst b/Doc/library/markup.rst
index dd0dd8f..19ce7b9 100644
--- a/Doc/library/markup.rst
+++ b/Doc/library/markup.rst
@@ -11,11 +11,9 @@
 for working with the Extensible Markup Language (XML).
 
 It is important to note that modules in the :mod:`xml` package require that
-there be at least one SAX-compliant XML parser available. Starting with Python
-2.3, the Expat parser is included with Python, so the :mod:`xml.parsers.expat`
-module will always be available. You may still want to be aware of the `PyXML
-add-on package <http://pyxml.sourceforge.net/>`_; that package provides an
-extended set of XML libraries for Python.
+there be at least one SAX-compliant XML parser available. The Expat parser is
+included with Python, so the :mod:`xml.parsers.expat` module will always be
+available.
 
 The documentation for the :mod:`xml.dom` and :mod:`xml.sax` packages are the
 definition of the Python bindings for the DOM and SAX interfaces.
@@ -35,10 +33,3 @@
    xml.sax.utils.rst
    xml.sax.reader.rst
    xml.etree.elementtree.rst
-
-.. seealso::
-
-   `Python/XML Libraries <http://pyxml.sourceforge.net/>`_
-      Home page for the PyXML package, containing an extension of :mod:`xml` package
-      bundled with Python.
-
diff --git a/Doc/library/marshal.rst b/Doc/library/marshal.rst
index fbe3e45..8ef443f 100644
--- a/Doc/library/marshal.rst
+++ b/Doc/library/marshal.rst
@@ -100,10 +100,9 @@
 
 .. data:: version
 
-   Indicates the format that the module uses. Version 0 is the historical format,
-   version 1 (added in Python 2.4) shares interned strings and version 2 (added in
-   Python 2.5) uses a binary format for floating point numbers. The current version
-   is 2.
+   Indicates the format that the module uses. Version 0 is the historical
+   format, version 1 shares interned strings and version 2 uses a binary format
+   for floating point numbers. The current version is 2.
 
 
 .. rubric:: Footnotes
diff --git a/Doc/library/math.rst b/Doc/library/math.rst
index d9593a8..b153f21 100644
--- a/Doc/library/math.rst
+++ b/Doc/library/math.rst
@@ -277,10 +277,6 @@
    platform and libm implementation. It's usually :exc:`ValueError` for *EDOM*
    and :exc:`OverflowError` for errno *ERANGE*.
 
-   ..versionchanged:: 2.6
-      In earlier versions of Python the outcome of an operation with NaN as
-      input depended on platform and libm implementation.
-
 
 .. seealso::
 
diff --git a/Doc/library/netrc.rst b/Doc/library/netrc.rst
index e6cc648..91990df 100644
--- a/Doc/library/netrc.rst
+++ b/Doc/library/netrc.rst
@@ -66,9 +66,8 @@
 
 .. note::
 
-   Passwords are limited to a subset of the ASCII character set. Versions of
-   this module prior to 2.3 were extremely limited.  Starting with 2.3, all
-   ASCII punctuation is allowed in passwords.  However, note that whitespace and
+   Passwords are limited to a subset of the ASCII character set.  All ASCII
+   punctuation is allowed in passwords, however, note that whitespace and
    non-printable characters are not allowed in passwords.  This is a limitation
    of the way the .netrc file is parsed and may be removed in the future.
 
diff --git a/Doc/library/os.rst b/Doc/library/os.rst
index bf0fe19..55e007a 100644
--- a/Doc/library/os.rst
+++ b/Doc/library/os.rst
@@ -463,8 +463,7 @@
 
    If you're starting with a Python file object *f*, first do ``f.flush()``, and
    then do ``os.fsync(f.fileno())``, to ensure that all internal buffers associated
-   with *f* are written to disk. Availability: Macintosh, Unix, and Windows
-   starting in 2.2.3.
+   with *f* are written to disk.  Availability: Macintosh, Unix, and Windows.
 
 
 .. function:: ftruncate(fd, length)
diff --git a/Doc/library/pickle.rst b/Doc/library/pickle.rst
index c3b9c8f..2194523 100644
--- a/Doc/library/pickle.rst
+++ b/Doc/library/pickle.rst
@@ -262,17 +262,6 @@
       pickled by reference and not by value.  This method is useful when re-using
       picklers.
 
-      .. note::
-
-         Prior to Python 2.3, :meth:`clear_memo` was only available on the picklers
-         created by :mod:`cPickle`.  In the :mod:`pickle` module, picklers have an
-         instance variable called :attr:`memo` which is a Python dictionary.  So to clear
-         the memo for a :mod:`pickle` module pickler, you could do the following::
-
-            mypickler.memo.clear()
-
-         Code that does not need to support older versions of Python should simply use
-         :meth:`clear_memo`.
 
 It is possible to make multiple calls to the :meth:`dump` method of the same
 :class:`Pickler` instance.  These must then be matched to the same number of
diff --git a/Doc/library/profile.rst b/Doc/library/profile.rst
index 5f770f6..f763f2d 100644
--- a/Doc/library/profile.rst
+++ b/Doc/library/profile.rst
@@ -546,7 +546,7 @@
 computer is *very* fast, or your timer function has poor resolution, you might
 have to pass 100000, or even 1000000, to get consistent results.
 
-When you have a consistent answer, there are three ways you can use it: [#]_ ::
+When you have a consistent answer, there are three ways you can use it::
 
    import profile
 
@@ -616,8 +616,3 @@
 .. [#] Updated and converted to LaTeX by Guido van Rossum. Further updated by Armin
    Rigo to integrate the documentation for the new :mod:`cProfile` module of Python
    2.5.
-
-.. [#] Prior to Python 2.2, it was necessary to edit the profiler source code to embed
-   the bias as a literal number.  You still can, but that method is no longer
-   described, because no longer needed.
-
diff --git a/Doc/library/random.rst b/Doc/library/random.rst
index afdff76..d8c3f5a 100644
--- a/Doc/library/random.rst
+++ b/Doc/library/random.rst
@@ -58,8 +58,6 @@
    Return an object capturing the current internal state of the generator.  This
    object can be passed to :func:`setstate` to restore the state.
 
-   State values produced in Python 2.6 cannot be loaded into earlier versions.
-
 
 .. function:: setstate(state)
 
diff --git a/Doc/library/re.rst b/Doc/library/re.rst
index 019652e..e3867c0 100644
--- a/Doc/library/re.rst
+++ b/Doc/library/re.rst
@@ -1035,10 +1035,10 @@
 
 You can often restructure your regular expression to avoid recursion.
 
-Starting with Python 2.3, simple uses of the ``*?`` pattern are special-cased to
-avoid recursion.  Thus, the above regular expression can avoid recursion by
-being recast as ``Begin [a-zA-Z0-9_ ]*?end``.  As a further benefit, such
-regular expressions will run faster than their recursive equivalents.
+Simple uses of the ``*?`` pattern are special-cased to avoid recursion.  Thus,
+the above regular expression can avoid recursion by being recast as ``Begin
+[a-zA-Z0-9_ ]*?end``.  As a further benefit, such regular expressions will run
+faster than their recursive equivalents.
 
 
 search() vs. match()
diff --git a/Doc/library/shlex.rst b/Doc/library/shlex.rst
index 4c509d8..7d88610 100644
--- a/Doc/library/shlex.rst
+++ b/Doc/library/shlex.rst
@@ -43,15 +43,14 @@
    A :class:`shlex` instance or subclass instance is a lexical analyzer object.
    The initialization argument, if present, specifies where to read characters
    from. It must be a file-/stream-like object with :meth:`read` and
-   :meth:`readline` methods, or a string (strings are accepted since Python 2.3).
-   If no argument is given, input will be taken from ``sys.stdin``.  The second
-   optional argument is a filename string, which sets the initial value of the
-   :attr:`infile` member.  If the *instream* argument is omitted or equal to
-   ``sys.stdin``, this second argument defaults to "stdin".  The *posix* argument
-   was introduced in Python 2.3, and defines the operational mode.  When *posix* is
-   not true (default), the :class:`shlex` instance will operate in compatibility
-   mode.  When operating in POSIX mode, :class:`shlex` will try to be as close as
-   possible to the POSIX shell parsing rules.
+   :meth:`readline` methods, or a string.  If no argument is given, input will
+   be taken from ``sys.stdin``.  The second optional argument is a filename
+   string, which sets the initial value of the :attr:`infile` member.  If the
+   *instream* argument is omitted or equal to ``sys.stdin``, this second
+   argument defaults to "stdin".  The *posix* argument defines the operational
+   mode: when *posix* is not true (default), the :class:`shlex` instance will
+   operate in compatibility mode.  When operating in POSIX mode, :class:`shlex`
+   will try to be as close as possible to the POSIX shell parsing rules.
 
 
 .. seealso::
diff --git a/Doc/library/site.rst b/Doc/library/site.rst
index 354043f..a574878 100644
--- a/Doc/library/site.rst
+++ b/Doc/library/site.rst
@@ -87,8 +87,6 @@
 
    A list of prefixes for site package directories
 
-   .. versionadded:: 2.6
-
 
 .. data:: ENABLE_USER_SITE
 
@@ -96,32 +94,22 @@
    user site directory is enabled and added to sys.path. When the flag
    is None the user site directory is disabled for security reasons.
 
-   .. versionadded:: 2.6
-
 
 .. data:: USER_SITE
 
    Path to the user site directory for the current Python version or None
 
-   .. versionadded:: 2.6
-
 
 .. data:: USER_BASE
 
    Path to the base directory for user site directories
 
-   .. versionadded:: 2.6
-
 
 .. envvar:: PYTHONNOUSERSITE
 
-   .. versionadded:: 2.6
-
 
 .. envvar:: PYTHONUSERBASE
 
-   .. versionadded:: 2.6
-
 
 .. function:: addsitedir(sitedir, known_paths=None)
 
diff --git a/Doc/library/socket.rst b/Doc/library/socket.rst
index a55ae70..9a3af1d 100644
--- a/Doc/library/socket.rst
+++ b/Doc/library/socket.rst
@@ -479,12 +479,6 @@
    Bind the socket to *address*.  The socket must not already be bound. (The format
    of *address* depends on the address family --- see above.)
 
-   .. note::
-
-      This method has historically accepted a pair of parameters for :const:`AF_INET`
-      addresses instead of only a tuple.  This was never intentional and is no longer
-      available in Python 2.0 and later.
-
 
 .. method:: socket.close()
 
@@ -498,12 +492,6 @@
    Connect to a remote socket at *address*. (The format of *address* depends on the
    address family --- see above.)
 
-   .. note::
-
-      This method has historically accepted a pair of parameters for :const:`AF_INET`
-      addresses instead of only a tuple.  This was never intentional and is no longer
-      available in Python 2.0 and later.
-
 
 .. method:: socket.connect_ex(address)
 
@@ -514,12 +502,6 @@
    :cdata:`errno` variable.  This is useful to support, for example, asynchronous
    connects.
 
-   .. note::
-
-      This method has historically accepted a pair of parameters for :const:`AF_INET`
-      addresses instead of only a tuple. This was never intentional and is no longer
-      available in Python 2.0 and later.
-
 
 .. method:: socket.fileno()
 
diff --git a/Doc/library/stdtypes.rst b/Doc/library/stdtypes.rst
index c910347..9e06a22 100644
--- a/Doc/library/stdtypes.rst
+++ b/Doc/library/stdtypes.rst
@@ -1906,7 +1906,7 @@
    which requires that the file be open will raise a :exc:`ValueError` after the
    file has been closed.  Calling :meth:`close` more than once is allowed.
 
-   As of Python 2.5, you can avoid having to call this method explicitly if you use
+   You can avoid having to call this method explicitly if you use
    the :keyword:`with` statement.  For example, the following code will
    automatically close *f* when the :keyword:`with` block is exited::
 
diff --git a/Doc/library/sys.rst b/Doc/library/sys.rst
index f66899c..0929f0e 100644
--- a/Doc/library/sys.rst
+++ b/Doc/library/sys.rst
@@ -152,21 +152,18 @@
 
    .. warning::
 
-      Assigning the *traceback* return value to a local variable in a function that is
-      handling an exception will cause a circular reference.  This will prevent
-      anything referenced by a local variable in the same function or by the traceback
-      from being garbage collected.  Since most functions don't need access to the
-      traceback, the best solution is to use something like ``exctype, value =
-      sys.exc_info()[:2]`` to extract only the exception type and value.  If you do
-      need the traceback, make sure to delete it after use (best done with a
-      :keyword:`try` ... :keyword:`finally` statement) or to call :func:`exc_info` in
-      a function that does not itself handle an exception.
+      Assigning the *traceback* return value to a local variable in a function
+      that is handling an exception will cause a circular reference.  Since most
+      functions don't need access to the traceback, the best solution is to use
+      something like ``exctype, value = sys.exc_info()[:2]`` to extract only the
+      exception type and value.  If you do need the traceback, make sure to
+      delete it after use (best done with a :keyword:`try`
+      ... :keyword:`finally` statement) or to call :func:`exc_info` in a
+      function that does not itself handle an exception.
 
-   .. note::
-
-      Beginning with Python 2.2, such cycles are automatically reclaimed when garbage
-      collection is enabled and they become unreachable, but it remains more efficient
-      to avoid creating cycles.
+      Such cycles are normally automatically reclaimed when garbage collection
+      is enabled and they become unreachable, but it remains more efficient to
+      avoid creating cycles.
 
 
 .. data:: exec_prefix
diff --git a/Doc/library/tempfile.rst b/Doc/library/tempfile.rst
index 4de9236..7363940 100644
--- a/Doc/library/tempfile.rst
+++ b/Doc/library/tempfile.rst
@@ -14,14 +14,11 @@
    pair: temporary; file
 
 This module generates temporary files and directories.  It works on all
-supported platforms.
-
-In version 2.3 of Python, this module was overhauled for enhanced security.  It
-now provides three new functions, :func:`NamedTemporaryFile`, :func:`mkstemp`,
-and :func:`mkdtemp`, which should eliminate all remaining need to use the
-insecure :func:`mktemp` function.  Temporary file names created by this module
-no longer contain the process ID; instead a string of six random characters is
-used.
+supported platforms.  It provides three new functions,
+:func:`NamedTemporaryFile`, :func:`mkstemp`, and :func:`mkdtemp`, which should
+eliminate all remaining need to use the insecure :func:`mktemp` function.
+Temporary file names created by this module no longer contain the process ID;
+instead a string of six random characters is used.
 
 Also, all the user-callable functions now take additional arguments which
 allow direct control over the location and name of temporary files.  It is
@@ -208,10 +205,6 @@
    On Windows, the default prefix is :file:`~T`; on all other systems it is
    :file:`tmp`.
 
-   Older versions of this module used to require that ``template`` be set to
-   ``None`` after a call to :func:`os.fork`; this has not been necessary since
-   version 1.5.2.
-
 
 .. function:: gettempprefix()
 
diff --git a/Doc/library/textwrap.rst b/Doc/library/textwrap.rst
index 9b2ad11..243e43c 100644
--- a/Doc/library/textwrap.rst
+++ b/Doc/library/textwrap.rst
@@ -52,9 +52,7 @@
 
    Note that tabs and spaces are both treated as whitespace, but they are not
    equal: the lines ``"  hello"`` and ``"\thello"`` are considered to have no
-   common leading whitespace.  (This behaviour is new in Python 2.5; older versions
-   of this module incorrectly expanded tabs before searching for common leading
-   whitespace.)
+   common leading whitespace.
 
    For example::
 
diff --git a/Doc/library/timeit.rst b/Doc/library/timeit.rst
index 6a8a94d..495ac81 100644
--- a/Doc/library/timeit.rst
+++ b/Doc/library/timeit.rst
@@ -94,8 +94,8 @@
 
          timeit.Timer('for i in range(10): oct(i)', 'gc.enable()').timeit()
 
-Starting with version 2.6, the module also defines two convenience functions:
 
+The module also defines two convenience functions:
 
 .. function:: repeat(stmt[, setup[, timer[, repeat=3 [, number=1000000]]]])
 
diff --git a/Doc/library/traceback.rst b/Doc/library/traceback.rst
index 2f29aae..389753a 100644
--- a/Doc/library/traceback.rst
+++ b/Doc/library/traceback.rst
@@ -122,14 +122,6 @@
    A shorthand for ``format_list(extract_stack(f, limit))``.
 
 
-.. function:: tb_lineno(tb)
-
-   This function returns the current line number set in the traceback object.  This
-   function was necessary because in versions of Python prior to 2.3 when the
-   :option:`-O` flag was passed to Python the ``tb.tb_lineno`` was not updated
-   correctly.  This function has no use in versions past 2.3.
-
-
 .. _traceback-example:
 
 Traceback Examples
diff --git a/Doc/library/undoc.rst b/Doc/library/undoc.rst
index 62157d4..b314530 100644
--- a/Doc/library/undoc.rst
+++ b/Doc/library/undoc.rst
@@ -149,7 +149,7 @@
 linked, or building and installing the shared object if using dynamically-loaded
 extensions.
 
-.. (lib-old is empty as of Python 2.5)
+.. XXX new explanation of lib-old necessary
 
    Those which are written in Python will be installed into the directory
    \file{lib-old/} installed as part of the standard library.  To use
diff --git a/Doc/library/urllib2.rst b/Doc/library/urllib2.rst
index d6a5fbd..7987007 100644
--- a/Doc/library/urllib2.rst
+++ b/Doc/library/urllib2.rst
@@ -71,9 +71,8 @@
    If the Python installation has SSL support (i.e., if the :mod:`ssl` module can be imported),
    :class:`HTTPSHandler` will also be added.
 
-   Beginning in Python 2.3, a :class:`BaseHandler` subclass may also change its
-   :attr:`handler_order` member variable to modify its position in the handlers
-   list.
+   A :class:`BaseHandler` subclass may also change its :attr:`handler_order`
+   member variable to modify its position in the handlers list.
 
 The following exceptions are raised as appropriate:
 
diff --git a/Doc/library/winsound.rst b/Doc/library/winsound.rst
index 3088848..dfe3c84 100644
--- a/Doc/library/winsound.rst
+++ b/Doc/library/winsound.rst
@@ -20,13 +20,6 @@
    parameter specifies the number of milliseconds the sound should last.  If the
    system is not able to beep the speaker, :exc:`RuntimeError` is raised.
 
-   .. note::
-
-      Under Windows 95 and 98, the Windows :cfunc:`Beep` function exists but is
-      useless (it ignores its arguments).  In that case Python simulates it via direct
-      port manipulation (added in version 2.1).  It's unknown whether that will work
-      on all systems.
-
 
 .. function:: PlaySound(sound, flags)
 
diff --git a/Doc/library/xml.dom.minidom.rst b/Doc/library/xml.dom.minidom.rst
index bb3ad02..fb3f5cf 100644
--- a/Doc/library/xml.dom.minidom.rst
+++ b/Doc/library/xml.dom.minidom.rst
@@ -162,16 +162,6 @@
    There's also an *encoding* argument; see :meth:`toxml`.
 
 
-The following standard DOM methods have special considerations with
-:mod:`xml.dom.minidom`:
-
-.. method:: Node.cloneNode(deep)
-
-   Although this method was present in the version of :mod:`xml.dom.minidom`
-   packaged with Python 2.0, it was seriously broken.  This has been corrected for
-   subsequent releases.
-
-
 .. _dom-example:
 
 DOM Example
@@ -224,18 +214,18 @@
   :exc:`TypeError` and :exc:`AttributeError`.
 
 * :class:`NodeList` objects are implemented using Python's built-in list type.
-  Starting with Python 2.2, these objects provide the interface defined in the DOM
-  specification, but with earlier versions of Python they do not support the
-  official API.  They are, however, much more "Pythonic" than the interface
-  defined in the W3C recommendations.
+  These objects provide the interface defined in the DOM specification, but with
+  earlier versions of Python they do not support the official API.  They are,
+  however, much more "Pythonic" than the interface defined in the W3C
+  recommendations.
 
 The following interfaces have no implementation in :mod:`xml.dom.minidom`:
 
 * :class:`DOMTimeStamp`
 
-* :class:`DocumentType` (added in Python 2.1)
+* :class:`DocumentType`
 
-* :class:`DOMImplementation` (added in Python 2.1)
+* :class:`DOMImplementation`
 
 * :class:`CharacterData`
 
diff --git a/Doc/library/xmlrpclib.rst b/Doc/library/xmlrpclib.rst
index dd6a0cc..c1f13c3 100644
--- a/Doc/library/xmlrpclib.rst
+++ b/Doc/library/xmlrpclib.rst
@@ -86,9 +86,8 @@
    raise a special :exc:`Fault` instance, used to signal XML-RPC server errors, or
    :exc:`ProtocolError` used to signal an error in the HTTP/HTTPS transport layer.
    Both :exc:`Fault` and :exc:`ProtocolError` derive from a base class called
-   :exc:`Error`.  Note that even though starting with Python 2.2 you can subclass
-   builtin types, the xmlrpclib module currently does not marshal instances of such
-   subclasses.
+   :exc:`Error`.  Note that the xmlrpclib module currently does not marshal
+   instances of subclasses of builtin types.
 
    When passing strings, characters special to XML such as ``<``, ``>``, and ``&``
    will be automatically escaped.  However, it's the caller's responsibility to