| """distutils.util |
| |
| Miscellaneous utility functions -- anything that doesn't fit into |
| one of the other *util.py modules. |
| """ |
| |
| __revision__ = "$Id$" |
| |
| import sys, os, string, re |
| |
| from distutils.errors import DistutilsPlatformError |
| from distutils.dep_util import newer |
| from distutils.spawn import spawn, find_executable |
| from distutils import log |
| from distutils.version import LooseVersion |
| from distutils.errors import DistutilsByteCompileError |
| |
| _sysconfig = __import__('sysconfig') |
| |
| def convert_path(pathname): |
| """Return 'pathname' as a name that will work on the native filesystem. |
| |
| i.e. split it on '/' and put it back together again using the current |
| directory separator. Needed because filenames in the setup script are |
| always supplied in Unix style, and have to be converted to the local |
| convention before we can actually use them in the filesystem. Raises |
| ValueError on non-Unix-ish systems if 'pathname' either starts or |
| ends with a slash. |
| """ |
| if os.sep == '/': |
| return pathname |
| if not pathname: |
| return pathname |
| if pathname[0] == '/': |
| raise ValueError("path '%s' cannot be absolute" % pathname) |
| if pathname[-1] == '/': |
| raise ValueError("path '%s' cannot end with '/'" % pathname) |
| |
| paths = pathname.split('/') |
| while '.' in paths: |
| paths.remove('.') |
| if not paths: |
| return os.curdir |
| return os.path.join(*paths) |
| |
| |
| def change_root(new_root, pathname): |
| """Return 'pathname' with 'new_root' prepended. |
| |
| If 'pathname' is relative, this is equivalent to |
| "os.path.join(new_root,pathname)". |
| Otherwise, it requires making 'pathname' relative and then joining the |
| two, which is tricky on DOS/Windows and Mac OS. |
| """ |
| if os.name == 'posix': |
| if not os.path.isabs(pathname): |
| return os.path.join(new_root, pathname) |
| else: |
| return os.path.join(new_root, pathname[1:]) |
| |
| elif os.name == 'nt': |
| (drive, path) = os.path.splitdrive(pathname) |
| if path[0] == '\\': |
| path = path[1:] |
| return os.path.join(new_root, path) |
| |
| elif os.name == 'os2': |
| (drive, path) = os.path.splitdrive(pathname) |
| if path[0] == os.sep: |
| path = path[1:] |
| return os.path.join(new_root, path) |
| |
| elif os.name == 'mac': |
| if not os.path.isabs(pathname): |
| return os.path.join(new_root, pathname) |
| else: |
| # Chop off volume name from start of path |
| elements = pathname.split(":", 1) |
| pathname = ":" + elements[1] |
| return os.path.join(new_root, pathname) |
| |
| else: |
| raise DistutilsPlatformError("nothing known about " |
| "platform '%s'" % os.name) |
| |
| _environ_checked = 0 |
| |
| def check_environ(): |
| """Ensure that 'os.environ' has all the environment variables needed. |
| |
| We guarantee that users can use in config files, command-line options, |
| etc. Currently this includes: |
| HOME - user's home directory (Unix only) |
| PLAT - description of the current platform, including hardware |
| and OS (see 'get_platform()') |
| """ |
| global _environ_checked |
| if _environ_checked: |
| return |
| |
| if os.name == 'posix' and 'HOME' not in os.environ: |
| import pwd |
| os.environ['HOME'] = pwd.getpwuid(os.getuid())[5] |
| |
| if 'PLAT' not in os.environ: |
| os.environ['PLAT'] = _sysconfig.get_platform() |
| |
| _environ_checked = 1 |
| |
| def subst_vars(s, local_vars): |
| """Perform shell/Perl-style variable substitution on 'string'. |
| |
| Every occurrence of '$' followed by a name is considered a variable, and |
| variable is substituted by the value found in the 'local_vars' |
| dictionary, or in 'os.environ' if it's not in 'local_vars'. |
| 'os.environ' is first checked/augmented to guarantee that it contains |
| certain values: see 'check_environ()'. Raise ValueError for any |
| variables not found in either 'local_vars' or 'os.environ'. |
| """ |
| check_environ() |
| def _subst (match, local_vars=local_vars): |
| var_name = match.group(1) |
| if var_name in local_vars: |
| return str(local_vars[var_name]) |
| else: |
| return os.environ[var_name] |
| |
| try: |
| return re.sub(r'\$([a-zA-Z_][a-zA-Z_0-9]*)', _subst, s) |
| except KeyError as var: |
| raise ValueError("invalid variable '$%s'" % var) |
| |
| def grok_environment_error(exc, prefix="error: "): |
| """Generate a useful error message from an EnvironmentError. |
| |
| This will generate an IOError or an OSError exception object. |
| Handles Python 1.5.1 and 1.5.2 styles, and |
| does what it can to deal with exception objects that don't have a |
| filename (which happens when the error is due to a two-file operation, |
| such as 'rename()' or 'link()'. Returns the error message as a string |
| prefixed with 'prefix'. |
| """ |
| # check for Python 1.5.2-style {IO,OS}Error exception objects |
| if hasattr(exc, 'filename') and hasattr(exc, 'strerror'): |
| if exc.filename: |
| error = prefix + "%s: %s" % (exc.filename, exc.strerror) |
| else: |
| # two-argument functions in posix module don't |
| # include the filename in the exception object! |
| error = prefix + "%s" % exc.strerror |
| else: |
| error = prefix + str(exc.args[-1]) |
| |
| return error |
| |
| # Needed by 'split_quoted()' |
| _wordchars_re = _squote_re = _dquote_re = None |
| |
| def _init_regex(): |
| global _wordchars_re, _squote_re, _dquote_re |
| _wordchars_re = re.compile(r'[^\\\'\"%s ]*' % string.whitespace) |
| _squote_re = re.compile(r"'(?:[^'\\]|\\.)*'") |
| _dquote_re = re.compile(r'"(?:[^"\\]|\\.)*"') |
| |
| def split_quoted(s): |
| """Split a string up according to Unix shell-like rules for quotes and |
| backslashes. |
| |
| In short: words are delimited by spaces, as long as those |
| spaces are not escaped by a backslash, or inside a quoted string. |
| Single and double quotes are equivalent, and the quote characters can |
| be backslash-escaped. The backslash is stripped from any two-character |
| escape sequence, leaving only the escaped character. The quote |
| characters are stripped from any quoted string. Returns a list of |
| words. |
| """ |
| # This is a nice algorithm for splitting up a single string, since it |
| # doesn't require character-by-character examination. It was a little |
| # bit of a brain-bender to get it working right, though... |
| if _wordchars_re is None: _init_regex() |
| |
| s = s.strip() |
| words = [] |
| pos = 0 |
| |
| while s: |
| m = _wordchars_re.match(s, pos) |
| end = m.end() |
| if end == len(s): |
| words.append(s[:end]) |
| break |
| |
| if s[end] in string.whitespace: # unescaped, unquoted whitespace: now |
| words.append(s[:end]) # we definitely have a word delimiter |
| s = s[end:].lstrip() |
| pos = 0 |
| |
| elif s[end] == '\\': # preserve whatever is being escaped; |
| # will become part of the current word |
| s = s[:end] + s[end+1:] |
| pos = end+1 |
| |
| else: |
| if s[end] == "'": # slurp singly-quoted string |
| m = _squote_re.match(s, end) |
| elif s[end] == '"': # slurp doubly-quoted string |
| m = _dquote_re.match(s, end) |
| else: |
| raise RuntimeError("this can't happen (bad char '%c')" % s[end]) |
| |
| if m is None: |
| raise ValueError("bad string (mismatched %s quotes?)" % s[end]) |
| |
| (beg, end) = m.span() |
| s = s[:beg] + s[beg+1:end-1] + s[end:] |
| pos = m.end() - 2 |
| |
| if pos >= len(s): |
| words.append(s) |
| break |
| |
| return words |
| |
| |
| def execute(func, args, msg=None, verbose=0, dry_run=0): |
| """Perform some action that affects the outside world. |
| |
| eg. by writing to the filesystem). Such actions are special because |
| they are disabled by the 'dry_run' flag. This method takes care of all |
| that bureaucracy for you; all you have to do is supply the |
| function to call and an argument tuple for it (to embody the |
| "external action" being performed), and an optional message to |
| print. |
| """ |
| if msg is None: |
| msg = "%s%r" % (func.__name__, args) |
| if msg[-2:] == ',)': # correct for singleton tuple |
| msg = msg[0:-2] + ')' |
| |
| log.info(msg) |
| if not dry_run: |
| func(*args) |
| |
| |
| def strtobool(val): |
| """Convert a string representation of truth to true (1) or false (0). |
| |
| True values are 'y', 'yes', 't', 'true', 'on', and '1'; false values |
| are 'n', 'no', 'f', 'false', 'off', and '0'. Raises ValueError if |
| 'val' is anything else. |
| """ |
| val = val.lower() |
| if val in ('y', 'yes', 't', 'true', 'on', '1'): |
| return 1 |
| elif val in ('n', 'no', 'f', 'false', 'off', '0'): |
| return 0 |
| else: |
| raise ValueError("invalid truth value %r" % (val,)) |
| |
| |
| def byte_compile(py_files, optimize=0, force=0, prefix=None, base_dir=None, |
| verbose=1, dry_run=0, direct=None): |
| """Byte-compile a collection of Python source files to either .pyc |
| or .pyo files in the same directory. |
| |
| 'py_files' is a list of files to compile; any files that don't end in |
| ".py" are silently skipped. 'optimize' must be one of the following: |
| 0 - don't optimize (generate .pyc) |
| 1 - normal optimization (like "python -O") |
| 2 - extra optimization (like "python -OO") |
| If 'force' is true, all files are recompiled regardless of |
| timestamps. |
| |
| The source filename encoded in each bytecode file defaults to the |
| filenames listed in 'py_files'; you can modify these with 'prefix' and |
| 'basedir'. 'prefix' is a string that will be stripped off of each |
| source filename, and 'base_dir' is a directory name that will be |
| prepended (after 'prefix' is stripped). You can supply either or both |
| (or neither) of 'prefix' and 'base_dir', as you wish. |
| |
| If 'dry_run' is true, doesn't actually do anything that would |
| affect the filesystem. |
| |
| Byte-compilation is either done directly in this interpreter process |
| with the standard py_compile module, or indirectly by writing a |
| temporary script and executing it. Normally, you should let |
| 'byte_compile()' figure out to use direct compilation or not (see |
| the source for details). The 'direct' flag is used by the script |
| generated in indirect mode; unless you know what you're doing, leave |
| it set to None. |
| """ |
| # nothing is done if sys.dont_write_bytecode is True |
| if sys.dont_write_bytecode: |
| raise DistutilsByteCompileError('byte-compiling is disabled.') |
| |
| # First, if the caller didn't force us into direct or indirect mode, |
| # figure out which mode we should be in. We take a conservative |
| # approach: choose direct mode *only* if the current interpreter is |
| # in debug mode and optimize is 0. If we're not in debug mode (-O |
| # or -OO), we don't know which level of optimization this |
| # interpreter is running with, so we can't do direct |
| # byte-compilation and be certain that it's the right thing. Thus, |
| # always compile indirectly if the current interpreter is in either |
| # optimize mode, or if either optimization level was requested by |
| # the caller. |
| if direct is None: |
| direct = (__debug__ and optimize == 0) |
| |
| # "Indirect" byte-compilation: write a temporary script and then |
| # run it with the appropriate flags. |
| if not direct: |
| try: |
| from tempfile import mkstemp |
| (script_fd, script_name) = mkstemp(".py") |
| except ImportError: |
| from tempfile import mktemp |
| (script_fd, script_name) = None, mktemp(".py") |
| log.info("writing byte-compilation script '%s'", script_name) |
| if not dry_run: |
| if script_fd is not None: |
| script = os.fdopen(script_fd, "w") |
| else: |
| script = open(script_name, "w") |
| |
| script.write("""\ |
| from distutils.util import byte_compile |
| files = [ |
| """) |
| |
| # XXX would be nice to write absolute filenames, just for |
| # safety's sake (script should be more robust in the face of |
| # chdir'ing before running it). But this requires abspath'ing |
| # 'prefix' as well, and that breaks the hack in build_lib's |
| # 'byte_compile()' method that carefully tacks on a trailing |
| # slash (os.sep really) to make sure the prefix here is "just |
| # right". This whole prefix business is rather delicate -- the |
| # problem is that it's really a directory, but I'm treating it |
| # as a dumb string, so trailing slashes and so forth matter. |
| |
| #py_files = map(os.path.abspath, py_files) |
| #if prefix: |
| # prefix = os.path.abspath(prefix) |
| |
| script.write(",\n".join(map(repr, py_files)) + "]\n") |
| script.write(""" |
| byte_compile(files, optimize=%r, force=%r, |
| prefix=%r, base_dir=%r, |
| verbose=%r, dry_run=0, |
| direct=1) |
| """ % (optimize, force, prefix, base_dir, verbose)) |
| |
| script.close() |
| |
| cmd = [sys.executable, script_name] |
| if optimize == 1: |
| cmd.insert(1, "-O") |
| elif optimize == 2: |
| cmd.insert(1, "-OO") |
| spawn(cmd, dry_run=dry_run) |
| execute(os.remove, (script_name,), "removing %s" % script_name, |
| dry_run=dry_run) |
| |
| # "Direct" byte-compilation: use the py_compile module to compile |
| # right here, right now. Note that the script generated in indirect |
| # mode simply calls 'byte_compile()' in direct mode, a weird sort of |
| # cross-process recursion. Hey, it works! |
| else: |
| from py_compile import compile |
| |
| for file in py_files: |
| if file[-3:] != ".py": |
| # This lets us be lazy and not filter filenames in |
| # the "install_lib" command. |
| continue |
| |
| # Terminology from the py_compile module: |
| # cfile - byte-compiled file |
| # dfile - purported source filename (same as 'file' by default) |
| cfile = file + (__debug__ and "c" or "o") |
| dfile = file |
| if prefix: |
| if file[:len(prefix)] != prefix: |
| raise ValueError("invalid prefix: filename %r doesn't " |
| "start with %r" % (file, prefix)) |
| dfile = dfile[len(prefix):] |
| if base_dir: |
| dfile = os.path.join(base_dir, dfile) |
| |
| cfile_base = os.path.basename(cfile) |
| if direct: |
| if force or newer(file, cfile): |
| log.info("byte-compiling %s to %s", file, cfile_base) |
| if not dry_run: |
| compile(file, cfile, dfile) |
| else: |
| log.debug("skipping byte-compilation of %s to %s", |
| file, cfile_base) |
| |
| |
| def rfc822_escape(header): |
| """Return a version of the string escaped for inclusion in an |
| RFC-822 header, by ensuring there are 8 spaces space after each newline. |
| """ |
| lines = header.split('\n') |
| sep = '\n' + 8 * ' ' |
| return sep.join(lines) |
| |
| _RE_VERSION = re.compile(b'(\d+\.\d+(\.\d+)*)') |
| _MAC_OS_X_LD_VERSION = re.compile(b'^@\(#\)PROGRAM:ld PROJECT:ld64-((\d+)(\.\d+)*)') |
| |
| def _find_ld_version(): |
| """Finds the ld version. The version scheme differs under Mac OSX.""" |
| if sys.platform == 'darwin': |
| return _find_exe_version('ld -v', _MAC_OS_X_LD_VERSION) |
| else: |
| return _find_exe_version('ld -v') |
| |
| def _find_exe_version(cmd, pattern=_RE_VERSION): |
| """Find the version of an executable by running `cmd` in the shell. |
| |
| `pattern` is a compiled regular expression. If not provided, default |
| to _RE_VERSION. If the command is not found, or the output does not |
| match the mattern, returns None. |
| """ |
| from subprocess import Popen, PIPE |
| executable = cmd.split()[0] |
| if find_executable(executable) is None: |
| return None |
| pipe = Popen(cmd, shell=True, stdout=PIPE, stderr=PIPE) |
| try: |
| stdout, stderr = pipe.stdout.read(), pipe.stderr.read() |
| finally: |
| pipe.stdout.close() |
| pipe.stderr.close() |
| # some commands like ld under MacOS X, will give the |
| # output in the stderr, rather than stdout. |
| if stdout != b'': |
| out_string = stdout |
| else: |
| out_string = stderr |
| |
| result = pattern.search(out_string) |
| if result is None: |
| return None |
| return LooseVersion(result.group(1).decode()) |
| |
| def get_compiler_versions(): |
| """Returns a tuple providing the versions of gcc, ld and dllwrap |
| |
| For each command, if a command is not found, None is returned. |
| Otherwise a LooseVersion instance is returned. |
| """ |
| gcc = _find_exe_version('gcc -dumpversion') |
| ld = _find_ld_version() |
| dllwrap = _find_exe_version('dllwrap --version') |
| return gcc, ld, dllwrap |
| |
| # 2to3 support |
| |
| def run_2to3(files, fixer_names=None, options=None, explicit=None): |
| """Invoke 2to3 on a list of Python files. |
| The files should all come from the build area, as the |
| modification is done in-place. To reduce the build time, |
| only files modified since the last invocation of this |
| function should be passed in the files argument.""" |
| |
| if not files: |
| return |
| |
| # Make this class local, to delay import of 2to3 |
| from lib2to3.refactor import RefactoringTool, get_fixers_from_package |
| class DistutilsRefactoringTool(RefactoringTool): |
| def log_error(self, msg, *args, **kw): |
| log.error(msg, *args) |
| |
| def log_message(self, msg, *args): |
| log.info(msg, *args) |
| |
| def log_debug(self, msg, *args): |
| log.debug(msg, *args) |
| |
| if fixer_names is None: |
| fixer_names = get_fixers_from_package('lib2to3.fixes') |
| r = DistutilsRefactoringTool(fixer_names, options=options) |
| r.refactor(files, write=True) |
| |
| def copydir_run_2to3(src, dest, template=None, fixer_names=None, |
| options=None, explicit=None): |
| """Recursively copy a directory, only copying new and changed files, |
| running run_2to3 over all newly copied Python modules afterward. |
| |
| If you give a template string, it's parsed like a MANIFEST.in. |
| """ |
| from distutils.dir_util import mkpath |
| from distutils.file_util import copy_file |
| from distutils.filelist import FileList |
| filelist = FileList() |
| curdir = os.getcwd() |
| os.chdir(src) |
| try: |
| filelist.findall() |
| finally: |
| os.chdir(curdir) |
| filelist.files[:] = filelist.allfiles |
| if template: |
| for line in template.splitlines(): |
| line = line.strip() |
| if not line: continue |
| filelist.process_template_line(line) |
| copied = [] |
| for filename in filelist.files: |
| outname = os.path.join(dest, filename) |
| mkpath(os.path.dirname(outname)) |
| res = copy_file(os.path.join(src, filename), outname, update=1) |
| if res[1]: copied.append(outname) |
| run_2to3([fn for fn in copied if fn.lower().endswith('.py')], |
| fixer_names=fixer_names, options=options, explicit=explicit) |
| return copied |
| |
| class Mixin2to3: |
| '''Mixin class for commands that run 2to3. |
| To configure 2to3, setup scripts may either change |
| the class variables, or inherit from individual commands |
| to override how 2to3 is invoked.''' |
| |
| # provide list of fixers to run; |
| # defaults to all from lib2to3.fixers |
| fixer_names = None |
| |
| # options dictionary |
| options = None |
| |
| # list of fixers to invoke even though they are marked as explicit |
| explicit = None |
| |
| def run_2to3(self, files): |
| return run_2to3(files, self.fixer_names, self.options, self.explicit) |