| ######################################################################## |
| # Copyright 1991, 1992, 1993, 1994 by Stichting Mathematisch Centrum, |
| # Amsterdam, The Netherlands. |
| # |
| # All Rights Reserved |
| # |
| # Permission to use, copy, modify, and distribute this software and its |
| # documentation for any purpose and without fee is hereby granted, |
| # provided that the above copyright notice appear in all copies and that |
| # both that copyright notice and this permission notice appear in |
| # supporting documentation, and that the names of Stichting Mathematisch |
| # Centrum or CWI not be used in advertising or publicity pertaining to |
| # distribution of the software without specific, written prior permission. |
| # |
| # STICHTING MATHEMATISCH CENTRUM DISCLAIMS ALL WARRANTIES WITH REGARD TO |
| # THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND |
| # FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM BE LIABLE |
| # FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT |
| # OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| ######################################################################## |
| |
| # Toplevel Makefile for Python |
| # Note -- if recursive makes fail, try adding MAKE=make |
| |
| # Substitutions by configure |
| srcdir= @srcdir@ |
| VPATH= @srcdir@ |
| INSTALL= @INSTALL@ |
| RANLIB= @RANLIB@ |
| |
| # Machine-dependent subdirectories |
| MACHDEP= @MACHDEP@ |
| |
| # Install prefix for architecture-independent files |
| prefix= @prefix@ |
| |
| # Install prefix for architecture-dependent files |
| exec_prefix= @exec_prefix@ |
| |
| # Expanded directories |
| MANDIR=$(prefix)/man |
| BINDIR=$(exec_prefix)/bin |
| LIBDIR=$(exec_prefix)/lib |
| INCLUDEDIR=$(prefix)/include |
| SCRIPTDIR=$(prefix)/lib |
| |
| # Symbols used for using shared libraries |
| SO= @SO@ |
| LDSHARED= @LDSHARED@ |
| CCSHARED= @CCSHARED@ |
| LINKFORSHARED= @LINKFORSHARED@ |
| DESTSHARED= $(SCRIPTDIR)/python/$(MACHDEP) |
| |
| # Programs |
| SHELL= /bin/sh |
| |
| # --with-PACKAGE options for configure script |
| # e.g. --with-readline --with-svr5 --with-solaris --with-thread |
| # (see README for an explanation) |
| WITH= |
| |
| # Compiler options passed to subordinate makes |
| OPT= @OPT@ |
| |
| # Subdirectories where to run make recursively |
| SUBDIRS= Parser Objects Python Modules |
| |
| # Other subdirectories |
| SUBDIRSTOO= Include Lib Doc Misc Demo readline Grammar |
| |
| # Files and directories to be distributed |
| CONFIGFILES= configure configure.in acconfig.h config.h.in Makefile.in |
| DISTFILES= README ChangeLog $(CONFIGFILES) |
| DISTDIRS= $(SUBDIRS) $(SUBDIRSTOO) Ext-dummy |
| DIST= $(DISTFILES) $(DISTDIRS) |
| |
| # Default target |
| all: python |
| |
| # Build the interpreter |
| python: Makefiles |
| for i in $(SUBDIRS); do \ |
| (echo $$i; cd $$i; $(MAKE) OPT="$(OPT)" all); \ |
| done |
| |
| # Test the interpreter (twice, once without .pyc files, once with) |
| TESTPATH= $(srcdir)/Lib:$(srcdir)/Lib/test:./Modules |
| test: python |
| -rm -f $(srcdir)/Lib/test/*.pyc |
| PYTHONPATH=$(TESTPATH) ./python -c 'import autotest' |
| PYTHONPATH=$(TESTPATH) ./python -c 'import autotest' |
| |
| # Install the interpreter |
| install: python |
| $(INSTALL) python $(BINDIR)/python |
| @echo If this is your first time, consider make libinstall... |
| |
| # Install the library. |
| # If your system does not support "cp -r", try "copy -r" or perhaps |
| # something like find Lib -print | cpio -pacvdmu $(LIBDEST) |
| LIBDEST= $(SCRIPTDIR)/python |
| libinstall: |
| -if test ! -d $(LIBDEST); \ |
| then mkdir $(LIBDEST); \ |
| fi |
| cp -r $(srcdir)/Lib/* $(LIBDEST) |
| PYTHONPATH=$(LIBDEST) \ |
| ./python $(LIBDEST)/compileall.py $(LIBDEST) |
| cd Modules; make sharedinstall |
| |
| # install the manual page |
| maninstall: |
| $(INSTALL) $(srcdir)/Misc/python.man \ |
| $(MANDIR)/man1/python.1 |
| |
| # install the include files |
| INCLUDEPY= $(INCLUDEDIR)/Py |
| inclinstall: |
| -if test ! -d $(INCLUDEPY); \ |
| then mkdir $(INCLUDEPY); \ |
| fi |
| cp $(srcdir)/Include/*.h $(INCLUDEPY) |
| |
| # install the lib*.a files and miscellaneous stuff needed by extensions |
| LIBP= $(LIBDIR)/python |
| LIBPL= $(LIBP)/lib |
| libainstall: all |
| -if test ! -d $(LIBP); \ |
| then mkdir $(LIBP); \ |
| fi |
| -if test ! -d $(LIBPL); \ |
| then mkdir $(LIBPL); \ |
| fi |
| for i in $(SUBDIRS); do \ |
| echo $$i; $(INSTALL) $$i/lib$$i.a $(LIBPL)/lib$$i.a; \ |
| $(RANLIB) $(LIBPL)/lib$$i.a; \ |
| done |
| $(INSTALL) Modules/config.c $(LIBPL)/config.c |
| $(INSTALL) $(srcdir)/Modules/config.c.in $(LIBPL)/config.c.in |
| $(INSTALL) Modules/Makefile $(LIBPL)/Makefile |
| $(INSTALL) Modules/Setup $(LIBPL)/Setup |
| $(INSTALL) $(srcdir)/Modules/makesetup $(LIBPL)/makesetup |
| $(INSTALL) config.h $(LIBPL)/config.h |
| $(INSTALL) $(srcdir)/Python/frozenmain.c $(LIBPL)/frozenmain.c |
| |
| # install the dynamically loadable modules |
| sharedinstall: |
| cd Modules; $(MAKE) \ |
| OPT="$(OPT)" \ |
| SO="$(SO)" \ |
| LDSHARED="$(LDSHARED)" \ |
| CCSHARED="$(CCSHARED)" \ |
| LINKFORSHARED="$(LINKFORSHARED)" \ |
| DESTSHARED="$(DESTSHARED)" \ |
| sharedinstall |
| |
| # Build the sub-Makefiles |
| Makefiles: config.status |
| (cd Modules; $(MAKE) -f Makefile.pre Makefile) |
| for i in . $(SUBDIRS); do \ |
| (echo $$i; cd $$i; $(MAKE) Makefile); \ |
| done |
| |
| # Build the toplevel Makefile |
| Makefile: Makefile.in config.status |
| CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) config.status |
| |
| # Run the configure script. If config.status already exists, |
| # call it with the --recheck argument, which reruns configure with the |
| # same options as it was run last time; otherwise run the configure |
| # script with options taken from the $(WITH) variable |
| config.status: $(srcdir)/configure |
| if test -f config.status; \ |
| then $(SHELL) config.status --recheck; \ |
| else $(SHELL) $(srcdir)/configure $(WITH); \ |
| fi |
| |
| .PRECIOUS: config.status python |
| |
| # Rerun configure with the same options as it was run last time, |
| # provided the config.status script exists |
| recheck: |
| $(SHELL) config.status --recheck |
| |
| # Rebuild the configure script from configure.in; also rebuild config.h.in |
| autoconf: |
| (cd $(srcdir); autoconf; autoheader) |
| |
| # Create a tags file for vi |
| tags:: |
| ctags -w -t Include/*.h |
| for i in $(SUBDIRS); do ctags -w -t -a $$i/*.[ch]; done |
| sort tags -o tags |
| |
| # Create a tags file for GNU Emacs |
| TAGS:: |
| etags Include/*.h |
| for i in $(SUBDIRS); do etags -a $$i/*.[ch]; done |
| |
| # Add dependencies to sub-Makefiles |
| depend: |
| for i in $(SUBDIRS); do \ |
| (echo $$i; cd $$i; $(MAKE) depend); \ |
| done |
| |
| # Sanitation targets -- clean leaves libraries, executables and tags |
| # files, which clobber removes those as well |
| |
| localclean: |
| -rm -f core *~ [@,#]* *.old *.orig *.rej |
| |
| clean: localclean |
| -for i in $(SUBDIRS); do \ |
| (echo $$i; cd $$i; \ |
| if test -f Makefile; \ |
| then $(MAKE) clean; \ |
| else $(MAKE) -f Makefile.*in clean; \ |
| fi); \ |
| done |
| |
| localclobber: localclean |
| -rm -f tags TAGS python |
| |
| clobber: localclobber |
| -for i in $(SUBDIRS); do \ |
| (echo $$i; cd $$i; \ |
| if test -f Makefile; \ |
| then $(MAKE) clobber; \ |
| else $(MAKE) -f Makefile.in clobber; \ |
| fi); \ |
| done |
| |
| # Make things extra clean, before making a distribution |
| distclean: clobber |
| -$(MAKE) SUBDIRS="$(SUBDIRSTOO)" clobber |
| -rm -f config.status config.log config.cache config.h Makefile |
| -for i in $(SUBDIRS) $(SUBDIRSTOO); do \ |
| for f in $$i/*.in; do \ |
| f=`basename "$$f" .in`; \ |
| if test "$$f" != "*"; then \ |
| echo rm -f "$$i/$$f"; \ |
| rm -f "$$i/$$f"; \ |
| fi; \ |
| done; \ |
| done |
| |
| # Find files with funny names |
| find: |
| find $(DISTDIRS) -type d \ |
| -o -name '*.[chs]' \ |
| -o -name '*.py' \ |
| -o -name '*.doc' \ |
| -o -name '*.sty' \ |
| -o -name '*.bib' \ |
| -o -name '*.dat' \ |
| -o -name '*.el' \ |
| -o -name '*.fd' \ |
| -o -name '*.in' \ |
| -o -name '*.tex' \ |
| -o -name '*,[vpt]' \ |
| -o -name 'Setup' \ |
| -o -name 'Setup.*' \ |
| -o -name README \ |
| -o -name Makefile \ |
| -o -name ChangeLog \ |
| -o -name RCS \ |
| -o -name Repository \ |
| -o -name Entries \ |
| -o -name Tag \ |
| -o -name tags \ |
| -o -name TAGS \ |
| -o -name .cvsignore \ |
| -o -name MANIFEST \ |
| -o -print |
| |
| # Build a distribution tar file (run make distclean first) |
| # (This leaves the RCS and CVS directories in :-( ) |
| tar: |
| tar cf - $(DIST) | gzip --best >dist.tar.gz |