| :mod:`binascii` --- Convert between binary and ASCII |
| ==================================================== |
| |
| .. module:: binascii |
| :synopsis: Tools for converting between binary and various ASCII-encoded binary |
| representations. |
| |
| |
| .. index:: |
| module: uu |
| module: base64 |
| module: binhex |
| |
| The :mod:`binascii` module contains a number of methods to convert between |
| binary and various ASCII-encoded binary representations. Normally, you will not |
| use these functions directly but use wrapper modules like :mod:`uu`, |
| :mod:`base64`, or :mod:`binhex` instead. The :mod:`binascii` module contains |
| low-level functions written in C for greater speed that are used by the |
| higher-level modules. |
| |
| .. note:: |
| |
| Encoding and decoding functions do not accept Unicode strings. Only bytestring |
| and bytearray objects can be processed. |
| |
| The :mod:`binascii` module defines the following functions: |
| |
| |
| .. function:: a2b_uu(string) |
| |
| Convert a single line of uuencoded data back to binary and return the binary |
| data. Lines normally contain 45 (binary) bytes, except for the last line. Line |
| data may be followed by whitespace. |
| |
| |
| .. function:: b2a_uu(data) |
| |
| Convert binary data to a line of ASCII characters, the return value is the |
| converted line, including a newline char. The length of *data* should be at most |
| 45. |
| |
| |
| .. function:: a2b_base64(string) |
| |
| Convert a block of base64 data back to binary and return the binary data. More |
| than one line may be passed at a time. |
| |
| |
| .. function:: b2a_base64(data) |
| |
| Convert binary data to a line of ASCII characters in base64 coding. The return |
| value is the converted line, including a newline char. The length of *data* |
| should be at most 57 to adhere to the base64 standard. |
| |
| |
| .. function:: a2b_qp(string, header=False) |
| |
| Convert a block of quoted-printable data back to binary and return the binary |
| data. More than one line may be passed at a time. If the optional argument |
| *header* is present and true, underscores will be decoded as spaces. |
| |
| .. versionchanged:: 3.2 |
| accept only bytestring or bytearray object as input. |
| |
| |
| .. function:: b2a_qp(data, quotetabs=False, istext=True, header=False) |
| |
| Convert binary data to a line(s) of ASCII characters in quoted-printable |
| encoding. The return value is the converted line(s). If the optional argument |
| *quotetabs* is present and true, all tabs and spaces will be encoded. If the |
| optional argument *istext* is present and true, newlines are not encoded but |
| trailing whitespace will be encoded. If the optional argument *header* is |
| present and true, spaces will be encoded as underscores per RFC1522. If the |
| optional argument *header* is present and false, newline characters will be |
| encoded as well; otherwise linefeed conversion might corrupt the binary data |
| stream. |
| |
| |
| .. function:: a2b_hqx(string) |
| |
| Convert binhex4 formatted ASCII data to binary, without doing RLE-decompression. |
| The string should contain a complete number of binary bytes, or (in case of the |
| last portion of the binhex4 data) have the remaining bits zero. |
| |
| |
| .. function:: rledecode_hqx(data) |
| |
| Perform RLE-decompression on the data, as per the binhex4 standard. The |
| algorithm uses ``0x90`` after a byte as a repeat indicator, followed by a count. |
| A count of ``0`` specifies a byte value of ``0x90``. The routine returns the |
| decompressed data, unless data input data ends in an orphaned repeat indicator, |
| in which case the :exc:`Incomplete` exception is raised. |
| |
| .. versionchanged:: 3.2 |
| accept only bytestring or bytearray object as input. |
| |
| |
| .. function:: rlecode_hqx(data) |
| |
| Perform binhex4 style RLE-compression on *data* and return the result. |
| |
| |
| .. function:: b2a_hqx(data) |
| |
| Perform hexbin4 binary-to-ASCII translation and return the resulting string. The |
| argument should already be RLE-coded, and have a length divisible by 3 (except |
| possibly the last fragment). |
| |
| |
| .. function:: crc_hqx(data, crc) |
| |
| Compute the binhex4 crc value of *data*, starting with an initial *crc* and |
| returning the result. |
| |
| |
| .. function:: crc32(data[, crc]) |
| |
| Compute CRC-32, the 32-bit checksum of data, starting with an initial crc. This |
| is consistent with the ZIP file checksum. Since the algorithm is designed for |
| use as a checksum algorithm, it is not suitable for use as a general hash |
| algorithm. Use as follows:: |
| |
| print(binascii.crc32(b"hello world")) |
| # Or, in two pieces: |
| crc = binascii.crc32(b"hello") |
| crc = binascii.crc32(b" world", crc) & 0xffffffff |
| print('crc32 = {:#010x}'.format(crc)) |
| |
| .. note:: |
| To generate the same numeric value across all Python versions and |
| platforms use crc32(data) & 0xffffffff. If you are only using |
| the checksum in packed binary format this is not necessary as the |
| return value is the correct 32bit binary representation |
| regardless of sign. |
| |
| |
| .. function:: b2a_hex(data) |
| hexlify(data) |
| |
| Return the hexadecimal representation of the binary *data*. Every byte of |
| *data* is converted into the corresponding 2-digit hex representation. The |
| resulting string is therefore twice as long as the length of *data*. |
| |
| |
| .. function:: a2b_hex(hexstr) |
| unhexlify(hexstr) |
| |
| Return the binary data represented by the hexadecimal string *hexstr*. This |
| function is the inverse of :func:`b2a_hex`. *hexstr* must contain an even number |
| of hexadecimal digits (which can be upper or lower case), otherwise a |
| :exc:`TypeError` is raised. |
| |
| .. versionchanged:: 3.2 |
| accept only bytestring or bytearray object as input. |
| |
| |
| .. exception:: Error |
| |
| Exception raised on errors. These are usually programming errors. |
| |
| |
| .. exception:: Incomplete |
| |
| Exception raised on incomplete data. These are usually not programming errors, |
| but may be handled by reading a little more data and trying again. |
| |
| |
| .. seealso:: |
| |
| Module :mod:`base64` |
| Support for base64 encoding used in MIME email messages. |
| |
| Module :mod:`binhex` |
| Support for the binhex format used on the Macintosh. |
| |
| Module :mod:`uu` |
| Support for UU encoding used on Unix. |
| |
| Module :mod:`quopri` |
| Support for quoted-printable encoding used in MIME email messages. |