| :mod:`venv` --- Creation of virtual environments |
| ================================================ |
| |
| .. module:: venv |
| :synopsis: Creation of virtual environments. |
| .. moduleauthor:: Vinay Sajip <vinay_sajip@yahoo.co.uk> |
| .. sectionauthor:: Vinay Sajip <vinay_sajip@yahoo.co.uk> |
| |
| |
| .. index:: pair: Environments; virtual |
| |
| .. versionadded:: 3.3 |
| |
| **Source code:** :source:`Lib/venv` |
| |
| -------------- |
| |
| The :mod:`venv` module provides support for creating lightweight "virtual |
| environments" with their own site directories, optionally isolated from system |
| site directories. Each virtual environment has its own Python binary (allowing |
| creation of environments with various Python versions) and can have its own |
| independent set of installed Python packages in its site directories. |
| |
| See :pep:`405` for more information about Python virtual environments. |
| |
| Creating virtual environments |
| ----------------------------- |
| |
| .. include:: /using/venv-create.inc |
| |
| |
| .. _venv-def: |
| |
| .. note:: A virtual environment (also called a ``venv``) is a Python |
| environment such that the Python interpreter, libraries and scripts |
| installed into it are isolated from those installed in other virtual |
| environments, and (by default) any libraries installed in a "system" Python, |
| i.e. one which is installed as part of your operating system. |
| |
| A venv is a directory tree which contains Python executable files and |
| other files which indicate that it is a venv. |
| |
| Common installation tools such as ``Distribute`` and ``pip`` work as |
| expected with venvs - i.e. when a venv is active, they install Python |
| packages into the venv without needing to be told to do so explicitly. |
| Of course, you need to install them into the venv first: this could be |
| done by running ``distribute_setup.py`` with the venv activated, |
| followed by running ``easy_install pip``. Alternatively, you could download |
| the source tarballs and run ``python setup.py install`` after unpacking, |
| with the venv activated. |
| |
| When a venv is active (i.e. the venv's Python interpreter is running), the |
| attributes :attr:`sys.prefix` and :attr:`sys.exec_prefix` point to the base |
| directory of the venv, whereas :attr:`sys.base_prefix` and |
| :attr:`sys.base_exec_prefix` point to the non-venv Python installation |
| which was used to create the venv. If a venv is not active, then |
| :attr:`sys.prefix` is the same as :attr:`sys.base_prefix` and |
| :attr:`sys.exec_prefix` is the same as :attr:`sys.base_exec_prefix` (they |
| all point to a non-venv Python installation). |
| |
| When a venv is active, any options that change the installation path will be |
| ignored from all distutils configuration files to prevent projects being |
| inadvertently installed outside of the virtual environment. |
| |
| When working in a command shell, users can make a venv active by running an |
| ``activate`` script in the venv's executables directory (the precise filename |
| is shell-dependent), which prepends the venv's directory for executables to |
| the ``PATH`` environment variable for the running shell. There should be no |
| need in other circumstances to activate a venv -- scripts installed into |
| venvs have a shebang line which points to the venv's Python interpreter. This |
| means that the script will run with that interpreter regardless of the value |
| of ``PATH``. On Windows, shebang line processing is supported if you have the |
| Python Launcher for Windows installed (this was added to Python in 3.3 - see |
| :pep:`397` for more details). Thus, double-clicking an installed script in |
| a Windows Explorer window should run the script with the correct interpreter |
| without there needing to be any reference to its venv in ``PATH``. |
| |
| |
| API |
| --- |
| |
| .. highlight:: python |
| |
| The high-level method described above makes use of a simple API which provides |
| mechanisms for third-party virtual environment creators to customize environment |
| creation according to their needs, the :class:`EnvBuilder` class. |
| |
| .. class:: EnvBuilder(system_site_packages=False, clear=False, symlinks=False, upgrade=False) |
| |
| The :class:`EnvBuilder` class accepts the following keyword arguments on |
| instantiation: |
| |
| * ``system_site_packages`` -- a Boolean value indicating that the system Python |
| site-packages should be available to the environment (defaults to ``False``). |
| |
| * ``clear`` -- a Boolean value which, if true, will delete any existing target |
| directory instead of raising an exception (defaults to ``False``). |
| |
| * ``symlinks`` -- a Boolean value indicating whether to attempt to symlink the |
| Python binary (and any necessary DLLs or other binaries, |
| e.g. ``pythonw.exe``), rather than copying. Defaults to ``True`` on Linux and |
| Unix systems, but ``False`` on Windows. |
| |
| * ``upgrade`` -- a Boolean value which, if true, will upgrade an existing |
| environment with the running Python - for use when that Python has been |
| upgraded in-place (defaults to ``False``). |
| |
| |
| |
| Creators of third-party virtual environment tools will be free to use the |
| provided ``EnvBuilder`` class as a base class. |
| |
| The returned env-builder is an object which has a method, ``create``: |
| |
| .. method:: create(env_dir) |
| |
| This method takes as required argument the path (absolute or relative to |
| the current directory) of the target directory which is to contain the |
| virtual environment. The ``create`` method will either create the |
| environment in the specified directory, or raise an appropriate |
| exception. |
| |
| The ``create`` method of the ``EnvBuilder`` class illustrates the hooks |
| available for subclass customization:: |
| |
| def create(self, env_dir): |
| """ |
| Create a virtualized Python environment in a directory. |
| env_dir is the target directory to create an environment in. |
| """ |
| env_dir = os.path.abspath(env_dir) |
| context = self.ensure_directories(env_dir) |
| self.create_configuration(context) |
| self.setup_python(context) |
| self.setup_scripts(context) |
| self.post_setup(context) |
| |
| Each of the methods :meth:`ensure_directories`, |
| :meth:`create_configuration`, :meth:`setup_python`, |
| :meth:`setup_scripts` and :meth:`post_setup` can be overridden. |
| |
| .. method:: ensure_directories(env_dir) |
| |
| Creates the environment directory and all necessary directories, and |
| returns a context object. This is just a holder for attributes (such as |
| paths), for use by the other methods. The directories are allowed to |
| exist already, as long as either ``clear`` or ``upgrade`` were |
| specified to allow operating on an existing environment directory. |
| |
| .. method:: create_configuration(context) |
| |
| Creates the ``pyvenv.cfg`` configuration file in the environment. |
| |
| .. method:: setup_python(context) |
| |
| Creates a copy of the Python executable (and, under Windows, DLLs) in |
| the environment. On a POSIX system, if a specific executable |
| ``python3.x`` was used, symlinks to ``python`` and ``python3`` will be |
| created pointing to that executable, unless files with those names |
| already exist. |
| |
| .. method:: setup_scripts(context) |
| |
| Installs activation scripts appropriate to the platform into the virtual |
| environment. |
| |
| .. method:: post_setup(context) |
| |
| A placeholder method which can be overridden in third party |
| implementations to pre-install packages in the virtual environment or |
| perform other post-creation steps. |
| |
| In addition, :class:`EnvBuilder` provides this utility method that can be |
| called from :meth:`setup_scripts` or :meth:`post_setup` in subclasses to |
| assist in installing custom scripts into the virtual environment. |
| |
| .. method:: install_scripts(context, path) |
| |
| *path* is the path to a directory that should contain subdirectories |
| "common", "posix", "nt", each containing scripts destined for the bin |
| directory in the environment. The contents of "common" and the |
| directory corresponding to :data:`os.name` are copied after some text |
| replacement of placeholders: |
| |
| * ``__VENV_DIR__`` is replaced with the absolute path of the environment |
| directory. |
| |
| * ``__VENV_NAME__`` is replaced with the environment name (final path |
| segment of environment directory). |
| |
| * ``__VENV_BIN_NAME__`` is replaced with the name of the bin directory |
| (either ``bin`` or ``Scripts``). |
| |
| * ``__VENV_PYTHON__`` is replaced with the absolute path of the |
| environment's executable. |
| |
| The directories are allowed to exist (for when an existing environment |
| is being upgraded). |
| |
| There is also a module-level convenience function: |
| |
| .. function:: create(env_dir, system_site_packages=False, clear=False, symlinks=False) |
| |
| Create an :class:`EnvBuilder` with the given keyword arguments, and call its |
| :meth:`~EnvBuilder.create` method with the *env_dir* argument. |
| |
| An example of extending ``EnvBuilder`` |
| -------------------------------------- |
| |
| The following script shows how to extend :class:`EnvBuilder` by implementing a |
| subclass which installs setuptools and pip into a created venv:: |
| |
| import os |
| import os.path |
| from subprocess import Popen, PIPE |
| import sys |
| from threading import Thread |
| from urllib.parse import urlparse |
| from urllib.request import urlretrieve |
| import venv |
| |
| class ExtendedEnvBuilder(venv.EnvBuilder): |
| """ |
| This builder installs setuptools and pip so that you can pip or |
| easy_install other packages into the created environment. |
| |
| :param nodist: If True, setuptools and pip are not installed into the |
| created environment. |
| :param nopip: If True, pip is not installed into the created |
| environment. |
| :param progress: If setuptools or pip are installed, the progress of the |
| installation can be monitored by passing a progress |
| callable. If specified, it is called with two |
| arguments: a string indicating some progress, and a |
| context indicating where the string is coming from. |
| The context argument can have one of three values: |
| 'main', indicating that it is called from virtualize() |
| itself, and 'stdout' and 'stderr', which are obtained |
| by reading lines from the output streams of a subprocess |
| which is used to install the app. |
| |
| If a callable is not specified, default progress |
| information is output to sys.stderr. |
| """ |
| |
| def __init__(self, *args, **kwargs): |
| self.nodist = kwargs.pop('nodist', False) |
| self.nopip = kwargs.pop('nopip', False) |
| self.progress = kwargs.pop('progress', None) |
| self.verbose = kwargs.pop('verbose', False) |
| super().__init__(*args, **kwargs) |
| |
| def post_setup(self, context): |
| """ |
| Set up any packages which need to be pre-installed into the |
| environment being created. |
| |
| :param context: The information for the environment creation request |
| being processed. |
| """ |
| os.environ['VIRTUAL_ENV'] = context.env_dir |
| if not self.nodist: |
| self.install_setuptools(context) |
| # Can't install pip without setuptools |
| if not self.nopip and not self.nodist: |
| self.install_pip(context) |
| |
| def reader(self, stream, context): |
| """ |
| Read lines from a subprocess' output stream and either pass to a progress |
| callable (if specified) or write progress information to sys.stderr. |
| """ |
| progress = self.progress |
| while True: |
| s = stream.readline() |
| if not s: |
| break |
| if progress is not None: |
| progress(s, context) |
| else: |
| if not self.verbose: |
| sys.stderr.write('.') |
| else: |
| sys.stderr.write(s.decode('utf-8')) |
| sys.stderr.flush() |
| stream.close() |
| |
| def install_script(self, context, name, url): |
| _, _, path, _, _, _ = urlparse(url) |
| fn = os.path.split(path)[-1] |
| binpath = context.bin_path |
| distpath = os.path.join(binpath, fn) |
| # Download script into the env's binaries folder |
| urlretrieve(url, distpath) |
| progress = self.progress |
| if self.verbose: |
| term = '\n' |
| else: |
| term = '' |
| if progress is not None: |
| progress('Installing %s ...%s' % (name, term), 'main') |
| else: |
| sys.stderr.write('Installing %s ...%s' % (name, term)) |
| sys.stderr.flush() |
| # Install in the env |
| args = [context.env_exe, fn] |
| p = Popen(args, stdout=PIPE, stderr=PIPE, cwd=binpath) |
| t1 = Thread(target=self.reader, args=(p.stdout, 'stdout')) |
| t1.start() |
| t2 = Thread(target=self.reader, args=(p.stderr, 'stderr')) |
| t2.start() |
| p.wait() |
| t1.join() |
| t2.join() |
| if progress is not None: |
| progress('done.', 'main') |
| else: |
| sys.stderr.write('done.\n') |
| # Clean up - no longer needed |
| os.unlink(distpath) |
| |
| def install_setuptools(self, context): |
| """ |
| Install setuptools in the environment. |
| |
| :param context: The information for the environment creation request |
| being processed. |
| """ |
| url = 'https://bitbucket.org/pypa/setuptools/downloads/ez_setup.py' |
| self.install_script(context, 'setuptools', url) |
| # clear up the setuptools archive which gets downloaded |
| pred = lambda o: o.startswith('setuptools-') and o.endswith('.tar.gz') |
| files = filter(pred, os.listdir(context.bin_path)) |
| for f in files: |
| f = os.path.join(context.bin_path, f) |
| os.unlink(f) |
| |
| def install_pip(self, context): |
| """ |
| Install pip in the environment. |
| |
| :param context: The information for the environment creation request |
| being processed. |
| """ |
| url = 'https://raw.github.com/pypa/pip/master/contrib/get-pip.py' |
| self.install_script(context, 'pip', url) |
| |
| def main(args=None): |
| compatible = True |
| if sys.version_info < (3, 3): |
| compatible = False |
| elif not hasattr(sys, 'base_prefix'): |
| compatible = False |
| if not compatible: |
| raise ValueError('This script is only for use with ' |
| 'Python 3.3 or later') |
| else: |
| import argparse |
| |
| parser = argparse.ArgumentParser(prog=__name__, |
| description='Creates virtual Python ' |
| 'environments in one or ' |
| 'more target ' |
| 'directories.') |
| parser.add_argument('dirs', metavar='ENV_DIR', nargs='+', |
| help='A directory to create the environment in.') |
| parser.add_argument('--no-setuptools', default=False, |
| action='store_true', dest='nodist', |
| help="Don't install setuptools or pip in the " |
| "virtual environment.") |
| parser.add_argument('--no-pip', default=False, |
| action='store_true', dest='nopip', |
| help="Don't install pip in the virtual " |
| "environment.") |
| parser.add_argument('--system-site-packages', default=False, |
| action='store_true', dest='system_site', |
| help='Give the virtual environment access to the ' |
| 'system site-packages dir.') |
| if os.name == 'nt': |
| use_symlinks = False |
| else: |
| use_symlinks = True |
| parser.add_argument('--symlinks', default=use_symlinks, |
| action='store_true', dest='symlinks', |
| help='Try to use symlinks rather than copies, ' |
| 'when symlinks are not the default for ' |
| 'the platform.') |
| parser.add_argument('--clear', default=False, action='store_true', |
| dest='clear', help='Delete the contents of the ' |
| 'environment directory if it ' |
| 'already exists, before ' |
| 'environment creation.') |
| parser.add_argument('--upgrade', default=False, action='store_true', |
| dest='upgrade', help='Upgrade the environment ' |
| 'directory to use this version ' |
| 'of Python, assuming Python ' |
| 'has been upgraded in-place.') |
| parser.add_argument('--verbose', default=False, action='store_true', |
| dest='verbose', help='Display the output ' |
| 'from the scripts which ' |
| 'install setuptools and pip.') |
| options = parser.parse_args(args) |
| if options.upgrade and options.clear: |
| raise ValueError('you cannot supply --upgrade and --clear together.') |
| builder = ExtendedEnvBuilder(system_site_packages=options.system_site, |
| clear=options.clear, |
| symlinks=options.symlinks, |
| upgrade=options.upgrade, |
| nodist=options.nodist, |
| nopip=options.nopip, |
| verbose=options.verbose) |
| for d in options.dirs: |
| builder.create(d) |
| |
| if __name__ == '__main__': |
| rc = 1 |
| try: |
| main() |
| rc = 0 |
| except Exception as e: |
| print('Error: %s' % e, file=sys.stderr) |
| sys.exit(rc) |
| |
| |
| This script is also available for download `online |
| <https://gist.github.com/4673395>`_. |