| """Unit tests for the io module.""" |
| |
| # Tests of io are scattered over the test suite: |
| # * test_bufio - tests file buffering |
| # * test_memoryio - tests BytesIO and StringIO |
| # * test_fileio - tests FileIO |
| # * test_file - tests the file interface |
| # * test_io - tests everything else in the io module |
| # * test_univnewlines - tests universal newline support |
| # * test_largefile - tests operations on a file greater than 2**32 bytes |
| # (only enabled with -ulargefile) |
| |
| ################################################################################ |
| # ATTENTION TEST WRITERS!!! |
| ################################################################################ |
| # When writing tests for io, it's important to test both the C and Python |
| # implementations. This is usually done by writing a base test that refers to |
| # the type it is testing as a attribute. Then it provides custom subclasses to |
| # test both implementations. This file has lots of examples. |
| ################################################################################ |
| |
| import abc |
| import array |
| import errno |
| import locale |
| import os |
| import pickle |
| import random |
| import signal |
| import sys |
| import time |
| import unittest |
| import warnings |
| import weakref |
| import _testcapi |
| from collections import deque, UserList |
| from itertools import cycle, count |
| from test import support |
| |
| import codecs |
| import io # C implementation of io |
| import _pyio as pyio # Python implementation of io |
| try: |
| import threading |
| except ImportError: |
| threading = None |
| try: |
| import fcntl |
| except ImportError: |
| fcntl = None |
| |
| def _default_chunk_size(): |
| """Get the default TextIOWrapper chunk size""" |
| with open(__file__, "r", encoding="latin-1") as f: |
| return f._CHUNK_SIZE |
| |
| |
| class MockRawIOWithoutRead: |
| """A RawIO implementation without read(), so as to exercise the default |
| RawIO.read() which calls readinto().""" |
| |
| def __init__(self, read_stack=()): |
| self._read_stack = list(read_stack) |
| self._write_stack = [] |
| self._reads = 0 |
| self._extraneous_reads = 0 |
| |
| def write(self, b): |
| self._write_stack.append(bytes(b)) |
| return len(b) |
| |
| def writable(self): |
| return True |
| |
| def fileno(self): |
| return 42 |
| |
| def readable(self): |
| return True |
| |
| def seekable(self): |
| return True |
| |
| def seek(self, pos, whence): |
| return 0 # wrong but we gotta return something |
| |
| def tell(self): |
| return 0 # same comment as above |
| |
| def readinto(self, buf): |
| self._reads += 1 |
| max_len = len(buf) |
| try: |
| data = self._read_stack[0] |
| except IndexError: |
| self._extraneous_reads += 1 |
| return 0 |
| if data is None: |
| del self._read_stack[0] |
| return None |
| n = len(data) |
| if len(data) <= max_len: |
| del self._read_stack[0] |
| buf[:n] = data |
| return n |
| else: |
| buf[:] = data[:max_len] |
| self._read_stack[0] = data[max_len:] |
| return max_len |
| |
| def truncate(self, pos=None): |
| return pos |
| |
| class CMockRawIOWithoutRead(MockRawIOWithoutRead, io.RawIOBase): |
| pass |
| |
| class PyMockRawIOWithoutRead(MockRawIOWithoutRead, pyio.RawIOBase): |
| pass |
| |
| |
| class MockRawIO(MockRawIOWithoutRead): |
| |
| def read(self, n=None): |
| self._reads += 1 |
| try: |
| return self._read_stack.pop(0) |
| except: |
| self._extraneous_reads += 1 |
| return b"" |
| |
| class CMockRawIO(MockRawIO, io.RawIOBase): |
| pass |
| |
| class PyMockRawIO(MockRawIO, pyio.RawIOBase): |
| pass |
| |
| |
| class MisbehavedRawIO(MockRawIO): |
| def write(self, b): |
| return super().write(b) * 2 |
| |
| def read(self, n=None): |
| return super().read(n) * 2 |
| |
| def seek(self, pos, whence): |
| return -123 |
| |
| def tell(self): |
| return -456 |
| |
| def readinto(self, buf): |
| super().readinto(buf) |
| return len(buf) * 5 |
| |
| class CMisbehavedRawIO(MisbehavedRawIO, io.RawIOBase): |
| pass |
| |
| class PyMisbehavedRawIO(MisbehavedRawIO, pyio.RawIOBase): |
| pass |
| |
| |
| class CloseFailureIO(MockRawIO): |
| closed = 0 |
| |
| def close(self): |
| if not self.closed: |
| self.closed = 1 |
| raise IOError |
| |
| class CCloseFailureIO(CloseFailureIO, io.RawIOBase): |
| pass |
| |
| class PyCloseFailureIO(CloseFailureIO, pyio.RawIOBase): |
| pass |
| |
| |
| class MockFileIO: |
| |
| def __init__(self, data): |
| self.read_history = [] |
| super().__init__(data) |
| |
| def read(self, n=None): |
| res = super().read(n) |
| self.read_history.append(None if res is None else len(res)) |
| return res |
| |
| def readinto(self, b): |
| res = super().readinto(b) |
| self.read_history.append(res) |
| return res |
| |
| class CMockFileIO(MockFileIO, io.BytesIO): |
| pass |
| |
| class PyMockFileIO(MockFileIO, pyio.BytesIO): |
| pass |
| |
| |
| class MockUnseekableIO: |
| def seekable(self): |
| return False |
| |
| def seek(self, *args): |
| raise self.UnsupportedOperation("not seekable") |
| |
| def tell(self, *args): |
| raise self.UnsupportedOperation("not seekable") |
| |
| class CMockUnseekableIO(MockUnseekableIO, io.BytesIO): |
| UnsupportedOperation = io.UnsupportedOperation |
| |
| class PyMockUnseekableIO(MockUnseekableIO, pyio.BytesIO): |
| UnsupportedOperation = pyio.UnsupportedOperation |
| |
| |
| class MockNonBlockWriterIO: |
| |
| def __init__(self): |
| self._write_stack = [] |
| self._blocker_char = None |
| |
| def pop_written(self): |
| s = b"".join(self._write_stack) |
| self._write_stack[:] = [] |
| return s |
| |
| def block_on(self, char): |
| """Block when a given char is encountered.""" |
| self._blocker_char = char |
| |
| def readable(self): |
| return True |
| |
| def seekable(self): |
| return True |
| |
| def writable(self): |
| return True |
| |
| def write(self, b): |
| b = bytes(b) |
| n = -1 |
| if self._blocker_char: |
| try: |
| n = b.index(self._blocker_char) |
| except ValueError: |
| pass |
| else: |
| if n > 0: |
| # write data up to the first blocker |
| self._write_stack.append(b[:n]) |
| return n |
| else: |
| # cancel blocker and indicate would block |
| self._blocker_char = None |
| return None |
| self._write_stack.append(b) |
| return len(b) |
| |
| class CMockNonBlockWriterIO(MockNonBlockWriterIO, io.RawIOBase): |
| BlockingIOError = io.BlockingIOError |
| |
| class PyMockNonBlockWriterIO(MockNonBlockWriterIO, pyio.RawIOBase): |
| BlockingIOError = pyio.BlockingIOError |
| |
| |
| class IOTest(unittest.TestCase): |
| |
| def setUp(self): |
| support.unlink(support.TESTFN) |
| |
| def tearDown(self): |
| support.unlink(support.TESTFN) |
| |
| def write_ops(self, f): |
| self.assertEqual(f.write(b"blah."), 5) |
| f.truncate(0) |
| self.assertEqual(f.tell(), 5) |
| f.seek(0) |
| |
| self.assertEqual(f.write(b"blah."), 5) |
| self.assertEqual(f.seek(0), 0) |
| self.assertEqual(f.write(b"Hello."), 6) |
| self.assertEqual(f.tell(), 6) |
| self.assertEqual(f.seek(-1, 1), 5) |
| self.assertEqual(f.tell(), 5) |
| self.assertEqual(f.write(bytearray(b" world\n\n\n")), 9) |
| self.assertEqual(f.seek(0), 0) |
| self.assertEqual(f.write(b"h"), 1) |
| self.assertEqual(f.seek(-1, 2), 13) |
| self.assertEqual(f.tell(), 13) |
| |
| self.assertEqual(f.truncate(12), 12) |
| self.assertEqual(f.tell(), 13) |
| self.assertRaises(TypeError, f.seek, 0.0) |
| |
| def read_ops(self, f, buffered=False): |
| data = f.read(5) |
| self.assertEqual(data, b"hello") |
| data = bytearray(data) |
| self.assertEqual(f.readinto(data), 5) |
| self.assertEqual(data, b" worl") |
| self.assertEqual(f.readinto(data), 2) |
| self.assertEqual(len(data), 5) |
| self.assertEqual(data[:2], b"d\n") |
| self.assertEqual(f.seek(0), 0) |
| self.assertEqual(f.read(20), b"hello world\n") |
| self.assertEqual(f.read(1), b"") |
| self.assertEqual(f.readinto(bytearray(b"x")), 0) |
| self.assertEqual(f.seek(-6, 2), 6) |
| self.assertEqual(f.read(5), b"world") |
| self.assertEqual(f.read(0), b"") |
| self.assertEqual(f.readinto(bytearray()), 0) |
| self.assertEqual(f.seek(-6, 1), 5) |
| self.assertEqual(f.read(5), b" worl") |
| self.assertEqual(f.tell(), 10) |
| self.assertRaises(TypeError, f.seek, 0.0) |
| if buffered: |
| f.seek(0) |
| self.assertEqual(f.read(), b"hello world\n") |
| f.seek(6) |
| self.assertEqual(f.read(), b"world\n") |
| self.assertEqual(f.read(), b"") |
| |
| LARGE = 2**31 |
| |
| def large_file_ops(self, f): |
| assert f.readable() |
| assert f.writable() |
| self.assertEqual(f.seek(self.LARGE), self.LARGE) |
| self.assertEqual(f.tell(), self.LARGE) |
| self.assertEqual(f.write(b"xxx"), 3) |
| self.assertEqual(f.tell(), self.LARGE + 3) |
| self.assertEqual(f.seek(-1, 1), self.LARGE + 2) |
| self.assertEqual(f.truncate(), self.LARGE + 2) |
| self.assertEqual(f.tell(), self.LARGE + 2) |
| self.assertEqual(f.seek(0, 2), self.LARGE + 2) |
| self.assertEqual(f.truncate(self.LARGE + 1), self.LARGE + 1) |
| self.assertEqual(f.tell(), self.LARGE + 2) |
| self.assertEqual(f.seek(0, 2), self.LARGE + 1) |
| self.assertEqual(f.seek(-1, 2), self.LARGE) |
| self.assertEqual(f.read(2), b"x") |
| |
| def test_invalid_operations(self): |
| # Try writing on a file opened in read mode and vice-versa. |
| exc = self.UnsupportedOperation |
| for mode in ("w", "wb"): |
| with self.open(support.TESTFN, mode) as fp: |
| self.assertRaises(exc, fp.read) |
| self.assertRaises(exc, fp.readline) |
| with self.open(support.TESTFN, "wb", buffering=0) as fp: |
| self.assertRaises(exc, fp.read) |
| self.assertRaises(exc, fp.readline) |
| with self.open(support.TESTFN, "rb", buffering=0) as fp: |
| self.assertRaises(exc, fp.write, b"blah") |
| self.assertRaises(exc, fp.writelines, [b"blah\n"]) |
| with self.open(support.TESTFN, "rb") as fp: |
| self.assertRaises(exc, fp.write, b"blah") |
| self.assertRaises(exc, fp.writelines, [b"blah\n"]) |
| with self.open(support.TESTFN, "r") as fp: |
| self.assertRaises(exc, fp.write, "blah") |
| self.assertRaises(exc, fp.writelines, ["blah\n"]) |
| # Non-zero seeking from current or end pos |
| self.assertRaises(exc, fp.seek, 1, self.SEEK_CUR) |
| self.assertRaises(exc, fp.seek, -1, self.SEEK_END) |
| |
| def test_open_handles_NUL_chars(self): |
| fn_with_NUL = 'foo\0bar' |
| self.assertRaises(TypeError, self.open, fn_with_NUL, 'w') |
| self.assertRaises(TypeError, self.open, bytes(fn_with_NUL, 'ascii'), 'w') |
| |
| def test_raw_file_io(self): |
| with self.open(support.TESTFN, "wb", buffering=0) as f: |
| self.assertEqual(f.readable(), False) |
| self.assertEqual(f.writable(), True) |
| self.assertEqual(f.seekable(), True) |
| self.write_ops(f) |
| with self.open(support.TESTFN, "rb", buffering=0) as f: |
| self.assertEqual(f.readable(), True) |
| self.assertEqual(f.writable(), False) |
| self.assertEqual(f.seekable(), True) |
| self.read_ops(f) |
| |
| def test_buffered_file_io(self): |
| with self.open(support.TESTFN, "wb") as f: |
| self.assertEqual(f.readable(), False) |
| self.assertEqual(f.writable(), True) |
| self.assertEqual(f.seekable(), True) |
| self.write_ops(f) |
| with self.open(support.TESTFN, "rb") as f: |
| self.assertEqual(f.readable(), True) |
| self.assertEqual(f.writable(), False) |
| self.assertEqual(f.seekable(), True) |
| self.read_ops(f, True) |
| |
| def test_readline(self): |
| with self.open(support.TESTFN, "wb") as f: |
| f.write(b"abc\ndef\nxyzzy\nfoo\x00bar\nanother line") |
| with self.open(support.TESTFN, "rb") as f: |
| self.assertEqual(f.readline(), b"abc\n") |
| self.assertEqual(f.readline(10), b"def\n") |
| self.assertEqual(f.readline(2), b"xy") |
| self.assertEqual(f.readline(4), b"zzy\n") |
| self.assertEqual(f.readline(), b"foo\x00bar\n") |
| self.assertEqual(f.readline(None), b"another line") |
| self.assertRaises(TypeError, f.readline, 5.3) |
| with self.open(support.TESTFN, "r") as f: |
| self.assertRaises(TypeError, f.readline, 5.3) |
| |
| def test_raw_bytes_io(self): |
| f = self.BytesIO() |
| self.write_ops(f) |
| data = f.getvalue() |
| self.assertEqual(data, b"hello world\n") |
| f = self.BytesIO(data) |
| self.read_ops(f, True) |
| |
| def test_large_file_ops(self): |
| # On Windows and Mac OSX this test comsumes large resources; It takes |
| # a long time to build the >2GB file and takes >2GB of disk space |
| # therefore the resource must be enabled to run this test. |
| if sys.platform[:3] == 'win' or sys.platform == 'darwin': |
| support.requires( |
| 'largefile', |
| 'test requires %s bytes and a long time to run' % self.LARGE) |
| with self.open(support.TESTFN, "w+b", 0) as f: |
| self.large_file_ops(f) |
| with self.open(support.TESTFN, "w+b") as f: |
| self.large_file_ops(f) |
| |
| def test_with_open(self): |
| for bufsize in (0, 1, 100): |
| f = None |
| with self.open(support.TESTFN, "wb", bufsize) as f: |
| f.write(b"xxx") |
| self.assertEqual(f.closed, True) |
| f = None |
| try: |
| with self.open(support.TESTFN, "wb", bufsize) as f: |
| 1/0 |
| except ZeroDivisionError: |
| self.assertEqual(f.closed, True) |
| else: |
| self.fail("1/0 didn't raise an exception") |
| |
| # issue 5008 |
| def test_append_mode_tell(self): |
| with self.open(support.TESTFN, "wb") as f: |
| f.write(b"xxx") |
| with self.open(support.TESTFN, "ab", buffering=0) as f: |
| self.assertEqual(f.tell(), 3) |
| with self.open(support.TESTFN, "ab") as f: |
| self.assertEqual(f.tell(), 3) |
| with self.open(support.TESTFN, "a") as f: |
| self.assertTrue(f.tell() > 0) |
| |
| def test_destructor(self): |
| record = [] |
| class MyFileIO(self.FileIO): |
| def __del__(self): |
| record.append(1) |
| try: |
| f = super().__del__ |
| except AttributeError: |
| pass |
| else: |
| f() |
| def close(self): |
| record.append(2) |
| super().close() |
| def flush(self): |
| record.append(3) |
| super().flush() |
| with support.check_warnings(('', ResourceWarning)): |
| f = MyFileIO(support.TESTFN, "wb") |
| f.write(b"xxx") |
| del f |
| support.gc_collect() |
| self.assertEqual(record, [1, 2, 3]) |
| with self.open(support.TESTFN, "rb") as f: |
| self.assertEqual(f.read(), b"xxx") |
| |
| def _check_base_destructor(self, base): |
| record = [] |
| class MyIO(base): |
| def __init__(self): |
| # This exercises the availability of attributes on object |
| # destruction. |
| # (in the C version, close() is called by the tp_dealloc |
| # function, not by __del__) |
| self.on_del = 1 |
| self.on_close = 2 |
| self.on_flush = 3 |
| def __del__(self): |
| record.append(self.on_del) |
| try: |
| f = super().__del__ |
| except AttributeError: |
| pass |
| else: |
| f() |
| def close(self): |
| record.append(self.on_close) |
| super().close() |
| def flush(self): |
| record.append(self.on_flush) |
| super().flush() |
| f = MyIO() |
| del f |
| support.gc_collect() |
| self.assertEqual(record, [1, 2, 3]) |
| |
| def test_IOBase_destructor(self): |
| self._check_base_destructor(self.IOBase) |
| |
| def test_RawIOBase_destructor(self): |
| self._check_base_destructor(self.RawIOBase) |
| |
| def test_BufferedIOBase_destructor(self): |
| self._check_base_destructor(self.BufferedIOBase) |
| |
| def test_TextIOBase_destructor(self): |
| self._check_base_destructor(self.TextIOBase) |
| |
| def test_close_flushes(self): |
| with self.open(support.TESTFN, "wb") as f: |
| f.write(b"xxx") |
| with self.open(support.TESTFN, "rb") as f: |
| self.assertEqual(f.read(), b"xxx") |
| |
| def test_array_writes(self): |
| a = array.array('i', range(10)) |
| n = len(a.tobytes()) |
| with self.open(support.TESTFN, "wb", 0) as f: |
| self.assertEqual(f.write(a), n) |
| with self.open(support.TESTFN, "wb") as f: |
| self.assertEqual(f.write(a), n) |
| |
| def test_closefd(self): |
| self.assertRaises(ValueError, self.open, support.TESTFN, 'w', |
| closefd=False) |
| |
| def test_read_closed(self): |
| with self.open(support.TESTFN, "w") as f: |
| f.write("egg\n") |
| with self.open(support.TESTFN, "r") as f: |
| file = self.open(f.fileno(), "r", closefd=False) |
| self.assertEqual(file.read(), "egg\n") |
| file.seek(0) |
| file.close() |
| self.assertRaises(ValueError, file.read) |
| |
| def test_no_closefd_with_filename(self): |
| # can't use closefd in combination with a file name |
| self.assertRaises(ValueError, self.open, support.TESTFN, "r", closefd=False) |
| |
| def test_closefd_attr(self): |
| with self.open(support.TESTFN, "wb") as f: |
| f.write(b"egg\n") |
| with self.open(support.TESTFN, "r") as f: |
| self.assertEqual(f.buffer.raw.closefd, True) |
| file = self.open(f.fileno(), "r", closefd=False) |
| self.assertEqual(file.buffer.raw.closefd, False) |
| |
| def test_garbage_collection(self): |
| # FileIO objects are collected, and collecting them flushes |
| # all data to disk. |
| with support.check_warnings(('', ResourceWarning)): |
| f = self.FileIO(support.TESTFN, "wb") |
| f.write(b"abcxxx") |
| f.f = f |
| wr = weakref.ref(f) |
| del f |
| support.gc_collect() |
| self.assertTrue(wr() is None, wr) |
| with self.open(support.TESTFN, "rb") as f: |
| self.assertEqual(f.read(), b"abcxxx") |
| |
| def test_unbounded_file(self): |
| # Issue #1174606: reading from an unbounded stream such as /dev/zero. |
| zero = "/dev/zero" |
| if not os.path.exists(zero): |
| self.skipTest("{0} does not exist".format(zero)) |
| if sys.maxsize > 0x7FFFFFFF: |
| self.skipTest("test can only run in a 32-bit address space") |
| if support.real_max_memuse < support._2G: |
| self.skipTest("test requires at least 2GB of memory") |
| with self.open(zero, "rb", buffering=0) as f: |
| self.assertRaises(OverflowError, f.read) |
| with self.open(zero, "rb") as f: |
| self.assertRaises(OverflowError, f.read) |
| with self.open(zero, "r") as f: |
| self.assertRaises(OverflowError, f.read) |
| |
| def test_flush_error_on_close(self): |
| f = self.open(support.TESTFN, "wb", buffering=0) |
| def bad_flush(): |
| raise IOError() |
| f.flush = bad_flush |
| self.assertRaises(IOError, f.close) # exception not swallowed |
| self.assertTrue(f.closed) |
| |
| def test_multi_close(self): |
| f = self.open(support.TESTFN, "wb", buffering=0) |
| f.close() |
| f.close() |
| f.close() |
| self.assertRaises(ValueError, f.flush) |
| |
| def test_RawIOBase_read(self): |
| # Exercise the default RawIOBase.read() implementation (which calls |
| # readinto() internally). |
| rawio = self.MockRawIOWithoutRead((b"abc", b"d", None, b"efg", None)) |
| self.assertEqual(rawio.read(2), b"ab") |
| self.assertEqual(rawio.read(2), b"c") |
| self.assertEqual(rawio.read(2), b"d") |
| self.assertEqual(rawio.read(2), None) |
| self.assertEqual(rawio.read(2), b"ef") |
| self.assertEqual(rawio.read(2), b"g") |
| self.assertEqual(rawio.read(2), None) |
| self.assertEqual(rawio.read(2), b"") |
| |
| def test_types_have_dict(self): |
| test = ( |
| self.IOBase(), |
| self.RawIOBase(), |
| self.TextIOBase(), |
| self.StringIO(), |
| self.BytesIO() |
| ) |
| for obj in test: |
| self.assertTrue(hasattr(obj, "__dict__")) |
| |
| def test_opener(self): |
| with self.open(support.TESTFN, "w") as f: |
| f.write("egg\n") |
| fd = os.open(support.TESTFN, os.O_RDONLY) |
| def opener(path, flags): |
| return fd |
| with self.open("non-existent", "r", opener=opener) as f: |
| self.assertEqual(f.read(), "egg\n") |
| |
| def test_fileio_closefd(self): |
| # Issue #4841 |
| with self.open(__file__, 'rb') as f1, \ |
| self.open(__file__, 'rb') as f2: |
| fileio = self.FileIO(f1.fileno(), closefd=False) |
| # .__init__() must not close f1 |
| fileio.__init__(f2.fileno(), closefd=False) |
| f1.readline() |
| # .close() must not close f2 |
| fileio.close() |
| f2.readline() |
| |
| |
| class CIOTest(IOTest): |
| |
| def test_IOBase_finalize(self): |
| # Issue #12149: segmentation fault on _PyIOBase_finalize when both a |
| # class which inherits IOBase and an object of this class are caught |
| # in a reference cycle and close() is already in the method cache. |
| class MyIO(self.IOBase): |
| def close(self): |
| pass |
| |
| # create an instance to populate the method cache |
| MyIO() |
| obj = MyIO() |
| obj.obj = obj |
| wr = weakref.ref(obj) |
| del MyIO |
| del obj |
| support.gc_collect() |
| self.assertTrue(wr() is None, wr) |
| |
| class PyIOTest(IOTest): |
| pass |
| |
| |
| class CommonBufferedTests: |
| # Tests common to BufferedReader, BufferedWriter and BufferedRandom |
| |
| def test_detach(self): |
| raw = self.MockRawIO() |
| buf = self.tp(raw) |
| self.assertIs(buf.detach(), raw) |
| self.assertRaises(ValueError, buf.detach) |
| |
| def test_fileno(self): |
| rawio = self.MockRawIO() |
| bufio = self.tp(rawio) |
| |
| self.assertEqual(42, bufio.fileno()) |
| |
| @unittest.skip('test having existential crisis') |
| def test_no_fileno(self): |
| # XXX will we always have fileno() function? If so, kill |
| # this test. Else, write it. |
| pass |
| |
| def test_invalid_args(self): |
| rawio = self.MockRawIO() |
| bufio = self.tp(rawio) |
| # Invalid whence |
| self.assertRaises(ValueError, bufio.seek, 0, -1) |
| self.assertRaises(ValueError, bufio.seek, 0, 9) |
| |
| def test_override_destructor(self): |
| tp = self.tp |
| record = [] |
| class MyBufferedIO(tp): |
| def __del__(self): |
| record.append(1) |
| try: |
| f = super().__del__ |
| except AttributeError: |
| pass |
| else: |
| f() |
| def close(self): |
| record.append(2) |
| super().close() |
| def flush(self): |
| record.append(3) |
| super().flush() |
| rawio = self.MockRawIO() |
| bufio = MyBufferedIO(rawio) |
| writable = bufio.writable() |
| del bufio |
| support.gc_collect() |
| if writable: |
| self.assertEqual(record, [1, 2, 3]) |
| else: |
| self.assertEqual(record, [1, 2]) |
| |
| def test_context_manager(self): |
| # Test usability as a context manager |
| rawio = self.MockRawIO() |
| bufio = self.tp(rawio) |
| def _with(): |
| with bufio: |
| pass |
| _with() |
| # bufio should now be closed, and using it a second time should raise |
| # a ValueError. |
| self.assertRaises(ValueError, _with) |
| |
| def test_error_through_destructor(self): |
| # Test that the exception state is not modified by a destructor, |
| # even if close() fails. |
| rawio = self.CloseFailureIO() |
| def f(): |
| self.tp(rawio).xyzzy |
| with support.captured_output("stderr") as s: |
| self.assertRaises(AttributeError, f) |
| s = s.getvalue().strip() |
| if s: |
| # The destructor *may* have printed an unraisable error, check it |
| self.assertEqual(len(s.splitlines()), 1) |
| self.assertTrue(s.startswith("Exception IOError: "), s) |
| self.assertTrue(s.endswith(" ignored"), s) |
| |
| def test_repr(self): |
| raw = self.MockRawIO() |
| b = self.tp(raw) |
| clsname = "%s.%s" % (self.tp.__module__, self.tp.__name__) |
| self.assertEqual(repr(b), "<%s>" % clsname) |
| raw.name = "dummy" |
| self.assertEqual(repr(b), "<%s name='dummy'>" % clsname) |
| raw.name = b"dummy" |
| self.assertEqual(repr(b), "<%s name=b'dummy'>" % clsname) |
| |
| def test_flush_error_on_close(self): |
| raw = self.MockRawIO() |
| def bad_flush(): |
| raise IOError() |
| raw.flush = bad_flush |
| b = self.tp(raw) |
| self.assertRaises(IOError, b.close) # exception not swallowed |
| self.assertTrue(b.closed) |
| |
| def test_close_error_on_close(self): |
| raw = self.MockRawIO() |
| def bad_flush(): |
| raise IOError('flush') |
| def bad_close(): |
| raise IOError('close') |
| raw.close = bad_close |
| b = self.tp(raw) |
| b.flush = bad_flush |
| with self.assertRaises(IOError) as err: # exception not swallowed |
| b.close() |
| self.assertEqual(err.exception.args, ('close',)) |
| self.assertEqual(err.exception.__context__.args, ('flush',)) |
| self.assertFalse(b.closed) |
| |
| def test_multi_close(self): |
| raw = self.MockRawIO() |
| b = self.tp(raw) |
| b.close() |
| b.close() |
| b.close() |
| self.assertRaises(ValueError, b.flush) |
| |
| def test_unseekable(self): |
| bufio = self.tp(self.MockUnseekableIO(b"A" * 10)) |
| self.assertRaises(self.UnsupportedOperation, bufio.tell) |
| self.assertRaises(self.UnsupportedOperation, bufio.seek, 0) |
| |
| def test_readonly_attributes(self): |
| raw = self.MockRawIO() |
| buf = self.tp(raw) |
| x = self.MockRawIO() |
| with self.assertRaises(AttributeError): |
| buf.raw = x |
| |
| |
| class SizeofTest: |
| |
| @support.cpython_only |
| def test_sizeof(self): |
| bufsize1 = 4096 |
| bufsize2 = 8192 |
| rawio = self.MockRawIO() |
| bufio = self.tp(rawio, buffer_size=bufsize1) |
| size = sys.getsizeof(bufio) - bufsize1 |
| rawio = self.MockRawIO() |
| bufio = self.tp(rawio, buffer_size=bufsize2) |
| self.assertEqual(sys.getsizeof(bufio), size + bufsize2) |
| |
| |
| class BufferedReaderTest(unittest.TestCase, CommonBufferedTests): |
| read_mode = "rb" |
| |
| def test_constructor(self): |
| rawio = self.MockRawIO([b"abc"]) |
| bufio = self.tp(rawio) |
| bufio.__init__(rawio) |
| bufio.__init__(rawio, buffer_size=1024) |
| bufio.__init__(rawio, buffer_size=16) |
| self.assertEqual(b"abc", bufio.read()) |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=0) |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=-16) |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=-1) |
| rawio = self.MockRawIO([b"abc"]) |
| bufio.__init__(rawio) |
| self.assertEqual(b"abc", bufio.read()) |
| |
| def test_read(self): |
| for arg in (None, 7): |
| rawio = self.MockRawIO((b"abc", b"d", b"efg")) |
| bufio = self.tp(rawio) |
| self.assertEqual(b"abcdefg", bufio.read(arg)) |
| # Invalid args |
| self.assertRaises(ValueError, bufio.read, -2) |
| |
| def test_read1(self): |
| rawio = self.MockRawIO((b"abc", b"d", b"efg")) |
| bufio = self.tp(rawio) |
| self.assertEqual(b"a", bufio.read(1)) |
| self.assertEqual(b"b", bufio.read1(1)) |
| self.assertEqual(rawio._reads, 1) |
| self.assertEqual(b"c", bufio.read1(100)) |
| self.assertEqual(rawio._reads, 1) |
| self.assertEqual(b"d", bufio.read1(100)) |
| self.assertEqual(rawio._reads, 2) |
| self.assertEqual(b"efg", bufio.read1(100)) |
| self.assertEqual(rawio._reads, 3) |
| self.assertEqual(b"", bufio.read1(100)) |
| self.assertEqual(rawio._reads, 4) |
| # Invalid args |
| self.assertRaises(ValueError, bufio.read1, -1) |
| |
| def test_readinto(self): |
| rawio = self.MockRawIO((b"abc", b"d", b"efg")) |
| bufio = self.tp(rawio) |
| b = bytearray(2) |
| self.assertEqual(bufio.readinto(b), 2) |
| self.assertEqual(b, b"ab") |
| self.assertEqual(bufio.readinto(b), 2) |
| self.assertEqual(b, b"cd") |
| self.assertEqual(bufio.readinto(b), 2) |
| self.assertEqual(b, b"ef") |
| self.assertEqual(bufio.readinto(b), 1) |
| self.assertEqual(b, b"gf") |
| self.assertEqual(bufio.readinto(b), 0) |
| self.assertEqual(b, b"gf") |
| rawio = self.MockRawIO((b"abc", None)) |
| bufio = self.tp(rawio) |
| self.assertEqual(bufio.readinto(b), 2) |
| self.assertEqual(b, b"ab") |
| self.assertEqual(bufio.readinto(b), 1) |
| self.assertEqual(b, b"cb") |
| |
| def test_readlines(self): |
| def bufio(): |
| rawio = self.MockRawIO((b"abc\n", b"d\n", b"ef")) |
| return self.tp(rawio) |
| self.assertEqual(bufio().readlines(), [b"abc\n", b"d\n", b"ef"]) |
| self.assertEqual(bufio().readlines(5), [b"abc\n", b"d\n"]) |
| self.assertEqual(bufio().readlines(None), [b"abc\n", b"d\n", b"ef"]) |
| |
| def test_buffering(self): |
| data = b"abcdefghi" |
| dlen = len(data) |
| |
| tests = [ |
| [ 100, [ 3, 1, 4, 8 ], [ dlen, 0 ] ], |
| [ 100, [ 3, 3, 3], [ dlen ] ], |
| [ 4, [ 1, 2, 4, 2 ], [ 4, 4, 1 ] ], |
| ] |
| |
| for bufsize, buf_read_sizes, raw_read_sizes in tests: |
| rawio = self.MockFileIO(data) |
| bufio = self.tp(rawio, buffer_size=bufsize) |
| pos = 0 |
| for nbytes in buf_read_sizes: |
| self.assertEqual(bufio.read(nbytes), data[pos:pos+nbytes]) |
| pos += nbytes |
| # this is mildly implementation-dependent |
| self.assertEqual(rawio.read_history, raw_read_sizes) |
| |
| def test_read_non_blocking(self): |
| # Inject some None's in there to simulate EWOULDBLOCK |
| rawio = self.MockRawIO((b"abc", b"d", None, b"efg", None, None, None)) |
| bufio = self.tp(rawio) |
| self.assertEqual(b"abcd", bufio.read(6)) |
| self.assertEqual(b"e", bufio.read(1)) |
| self.assertEqual(b"fg", bufio.read()) |
| self.assertEqual(b"", bufio.peek(1)) |
| self.assertIsNone(bufio.read()) |
| self.assertEqual(b"", bufio.read()) |
| |
| rawio = self.MockRawIO((b"a", None, None)) |
| self.assertEqual(b"a", rawio.readall()) |
| self.assertIsNone(rawio.readall()) |
| |
| def test_read_past_eof(self): |
| rawio = self.MockRawIO((b"abc", b"d", b"efg")) |
| bufio = self.tp(rawio) |
| |
| self.assertEqual(b"abcdefg", bufio.read(9000)) |
| |
| def test_read_all(self): |
| rawio = self.MockRawIO((b"abc", b"d", b"efg")) |
| bufio = self.tp(rawio) |
| |
| self.assertEqual(b"abcdefg", bufio.read()) |
| |
| @unittest.skipUnless(threading, 'Threading required for this test.') |
| @support.requires_resource('cpu') |
| def test_threads(self): |
| try: |
| # Write out many bytes with exactly the same number of 0's, |
| # 1's... 255's. This will help us check that concurrent reading |
| # doesn't duplicate or forget contents. |
| N = 1000 |
| l = list(range(256)) * N |
| random.shuffle(l) |
| s = bytes(bytearray(l)) |
| with self.open(support.TESTFN, "wb") as f: |
| f.write(s) |
| with self.open(support.TESTFN, self.read_mode, buffering=0) as raw: |
| bufio = self.tp(raw, 8) |
| errors = [] |
| results = [] |
| def f(): |
| try: |
| # Intra-buffer read then buffer-flushing read |
| for n in cycle([1, 19]): |
| s = bufio.read(n) |
| if not s: |
| break |
| # list.append() is atomic |
| results.append(s) |
| except Exception as e: |
| errors.append(e) |
| raise |
| threads = [threading.Thread(target=f) for x in range(20)] |
| for t in threads: |
| t.start() |
| time.sleep(0.02) # yield |
| for t in threads: |
| t.join() |
| self.assertFalse(errors, |
| "the following exceptions were caught: %r" % errors) |
| s = b''.join(results) |
| for i in range(256): |
| c = bytes(bytearray([i])) |
| self.assertEqual(s.count(c), N) |
| finally: |
| support.unlink(support.TESTFN) |
| |
| def test_unseekable(self): |
| bufio = self.tp(self.MockUnseekableIO(b"A" * 10)) |
| self.assertRaises(self.UnsupportedOperation, bufio.tell) |
| self.assertRaises(self.UnsupportedOperation, bufio.seek, 0) |
| bufio.read(1) |
| self.assertRaises(self.UnsupportedOperation, bufio.seek, 0) |
| self.assertRaises(self.UnsupportedOperation, bufio.tell) |
| |
| def test_misbehaved_io(self): |
| rawio = self.MisbehavedRawIO((b"abc", b"d", b"efg")) |
| bufio = self.tp(rawio) |
| self.assertRaises(IOError, bufio.seek, 0) |
| self.assertRaises(IOError, bufio.tell) |
| |
| def test_no_extraneous_read(self): |
| # Issue #9550; when the raw IO object has satisfied the read request, |
| # we should not issue any additional reads, otherwise it may block |
| # (e.g. socket). |
| bufsize = 16 |
| for n in (2, bufsize - 1, bufsize, bufsize + 1, bufsize * 2): |
| rawio = self.MockRawIO([b"x" * n]) |
| bufio = self.tp(rawio, bufsize) |
| self.assertEqual(bufio.read(n), b"x" * n) |
| # Simple case: one raw read is enough to satisfy the request. |
| self.assertEqual(rawio._extraneous_reads, 0, |
| "failed for {}: {} != 0".format(n, rawio._extraneous_reads)) |
| # A more complex case where two raw reads are needed to satisfy |
| # the request. |
| rawio = self.MockRawIO([b"x" * (n - 1), b"x"]) |
| bufio = self.tp(rawio, bufsize) |
| self.assertEqual(bufio.read(n), b"x" * n) |
| self.assertEqual(rawio._extraneous_reads, 0, |
| "failed for {}: {} != 0".format(n, rawio._extraneous_reads)) |
| |
| |
| class CBufferedReaderTest(BufferedReaderTest, SizeofTest): |
| tp = io.BufferedReader |
| |
| def test_constructor(self): |
| BufferedReaderTest.test_constructor(self) |
| # The allocation can succeed on 32-bit builds, e.g. with more |
| # than 2GB RAM and a 64-bit kernel. |
| if sys.maxsize > 0x7FFFFFFF: |
| rawio = self.MockRawIO() |
| bufio = self.tp(rawio) |
| self.assertRaises((OverflowError, MemoryError, ValueError), |
| bufio.__init__, rawio, sys.maxsize) |
| |
| def test_initialization(self): |
| rawio = self.MockRawIO([b"abc"]) |
| bufio = self.tp(rawio) |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=0) |
| self.assertRaises(ValueError, bufio.read) |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=-16) |
| self.assertRaises(ValueError, bufio.read) |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=-1) |
| self.assertRaises(ValueError, bufio.read) |
| |
| def test_misbehaved_io_read(self): |
| rawio = self.MisbehavedRawIO((b"abc", b"d", b"efg")) |
| bufio = self.tp(rawio) |
| # _pyio.BufferedReader seems to implement reading different, so that |
| # checking this is not so easy. |
| self.assertRaises(IOError, bufio.read, 10) |
| |
| def test_garbage_collection(self): |
| # C BufferedReader objects are collected. |
| # The Python version has __del__, so it ends into gc.garbage instead |
| rawio = self.FileIO(support.TESTFN, "w+b") |
| f = self.tp(rawio) |
| f.f = f |
| wr = weakref.ref(f) |
| del f |
| support.gc_collect() |
| self.assertTrue(wr() is None, wr) |
| |
| def test_args_error(self): |
| # Issue #17275 |
| with self.assertRaisesRegex(TypeError, "BufferedReader"): |
| self.tp(io.BytesIO(), 1024, 1024, 1024) |
| |
| |
| class PyBufferedReaderTest(BufferedReaderTest): |
| tp = pyio.BufferedReader |
| |
| |
| class BufferedWriterTest(unittest.TestCase, CommonBufferedTests): |
| write_mode = "wb" |
| |
| def test_constructor(self): |
| rawio = self.MockRawIO() |
| bufio = self.tp(rawio) |
| bufio.__init__(rawio) |
| bufio.__init__(rawio, buffer_size=1024) |
| bufio.__init__(rawio, buffer_size=16) |
| self.assertEqual(3, bufio.write(b"abc")) |
| bufio.flush() |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=0) |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=-16) |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=-1) |
| bufio.__init__(rawio) |
| self.assertEqual(3, bufio.write(b"ghi")) |
| bufio.flush() |
| self.assertEqual(b"".join(rawio._write_stack), b"abcghi") |
| |
| def test_detach_flush(self): |
| raw = self.MockRawIO() |
| buf = self.tp(raw) |
| buf.write(b"howdy!") |
| self.assertFalse(raw._write_stack) |
| buf.detach() |
| self.assertEqual(raw._write_stack, [b"howdy!"]) |
| |
| def test_write(self): |
| # Write to the buffered IO but don't overflow the buffer. |
| writer = self.MockRawIO() |
| bufio = self.tp(writer, 8) |
| bufio.write(b"abc") |
| self.assertFalse(writer._write_stack) |
| |
| def test_write_overflow(self): |
| writer = self.MockRawIO() |
| bufio = self.tp(writer, 8) |
| contents = b"abcdefghijklmnop" |
| for n in range(0, len(contents), 3): |
| bufio.write(contents[n:n+3]) |
| flushed = b"".join(writer._write_stack) |
| # At least (total - 8) bytes were implicitly flushed, perhaps more |
| # depending on the implementation. |
| self.assertTrue(flushed.startswith(contents[:-8]), flushed) |
| |
| def check_writes(self, intermediate_func): |
| # Lots of writes, test the flushed output is as expected. |
| contents = bytes(range(256)) * 1000 |
| n = 0 |
| writer = self.MockRawIO() |
| bufio = self.tp(writer, 13) |
| # Generator of write sizes: repeat each N 15 times then proceed to N+1 |
| def gen_sizes(): |
| for size in count(1): |
| for i in range(15): |
| yield size |
| sizes = gen_sizes() |
| while n < len(contents): |
| size = min(next(sizes), len(contents) - n) |
| self.assertEqual(bufio.write(contents[n:n+size]), size) |
| intermediate_func(bufio) |
| n += size |
| bufio.flush() |
| self.assertEqual(contents, b"".join(writer._write_stack)) |
| |
| def test_writes(self): |
| self.check_writes(lambda bufio: None) |
| |
| def test_writes_and_flushes(self): |
| self.check_writes(lambda bufio: bufio.flush()) |
| |
| def test_writes_and_seeks(self): |
| def _seekabs(bufio): |
| pos = bufio.tell() |
| bufio.seek(pos + 1, 0) |
| bufio.seek(pos - 1, 0) |
| bufio.seek(pos, 0) |
| self.check_writes(_seekabs) |
| def _seekrel(bufio): |
| pos = bufio.seek(0, 1) |
| bufio.seek(+1, 1) |
| bufio.seek(-1, 1) |
| bufio.seek(pos, 0) |
| self.check_writes(_seekrel) |
| |
| def test_writes_and_truncates(self): |
| self.check_writes(lambda bufio: bufio.truncate(bufio.tell())) |
| |
| def test_write_non_blocking(self): |
| raw = self.MockNonBlockWriterIO() |
| bufio = self.tp(raw, 8) |
| |
| self.assertEqual(bufio.write(b"abcd"), 4) |
| self.assertEqual(bufio.write(b"efghi"), 5) |
| # 1 byte will be written, the rest will be buffered |
| raw.block_on(b"k") |
| self.assertEqual(bufio.write(b"jklmn"), 5) |
| |
| # 8 bytes will be written, 8 will be buffered and the rest will be lost |
| raw.block_on(b"0") |
| try: |
| bufio.write(b"opqrwxyz0123456789") |
| except self.BlockingIOError as e: |
| written = e.characters_written |
| else: |
| self.fail("BlockingIOError should have been raised") |
| self.assertEqual(written, 16) |
| self.assertEqual(raw.pop_written(), |
| b"abcdefghijklmnopqrwxyz") |
| |
| self.assertEqual(bufio.write(b"ABCDEFGHI"), 9) |
| s = raw.pop_written() |
| # Previously buffered bytes were flushed |
| self.assertTrue(s.startswith(b"01234567A"), s) |
| |
| def test_write_and_rewind(self): |
| raw = io.BytesIO() |
| bufio = self.tp(raw, 4) |
| self.assertEqual(bufio.write(b"abcdef"), 6) |
| self.assertEqual(bufio.tell(), 6) |
| bufio.seek(0, 0) |
| self.assertEqual(bufio.write(b"XY"), 2) |
| bufio.seek(6, 0) |
| self.assertEqual(raw.getvalue(), b"XYcdef") |
| self.assertEqual(bufio.write(b"123456"), 6) |
| bufio.flush() |
| self.assertEqual(raw.getvalue(), b"XYcdef123456") |
| |
| def test_flush(self): |
| writer = self.MockRawIO() |
| bufio = self.tp(writer, 8) |
| bufio.write(b"abc") |
| bufio.flush() |
| self.assertEqual(b"abc", writer._write_stack[0]) |
| |
| def test_writelines(self): |
| l = [b'ab', b'cd', b'ef'] |
| writer = self.MockRawIO() |
| bufio = self.tp(writer, 8) |
| bufio.writelines(l) |
| bufio.flush() |
| self.assertEqual(b''.join(writer._write_stack), b'abcdef') |
| |
| def test_writelines_userlist(self): |
| l = UserList([b'ab', b'cd', b'ef']) |
| writer = self.MockRawIO() |
| bufio = self.tp(writer, 8) |
| bufio.writelines(l) |
| bufio.flush() |
| self.assertEqual(b''.join(writer._write_stack), b'abcdef') |
| |
| def test_writelines_error(self): |
| writer = self.MockRawIO() |
| bufio = self.tp(writer, 8) |
| self.assertRaises(TypeError, bufio.writelines, [1, 2, 3]) |
| self.assertRaises(TypeError, bufio.writelines, None) |
| self.assertRaises(TypeError, bufio.writelines, 'abc') |
| |
| def test_destructor(self): |
| writer = self.MockRawIO() |
| bufio = self.tp(writer, 8) |
| bufio.write(b"abc") |
| del bufio |
| support.gc_collect() |
| self.assertEqual(b"abc", writer._write_stack[0]) |
| |
| def test_truncate(self): |
| # Truncate implicitly flushes the buffer. |
| with self.open(support.TESTFN, self.write_mode, buffering=0) as raw: |
| bufio = self.tp(raw, 8) |
| bufio.write(b"abcdef") |
| self.assertEqual(bufio.truncate(3), 3) |
| self.assertEqual(bufio.tell(), 6) |
| with self.open(support.TESTFN, "rb", buffering=0) as f: |
| self.assertEqual(f.read(), b"abc") |
| |
| @unittest.skipUnless(threading, 'Threading required for this test.') |
| @support.requires_resource('cpu') |
| def test_threads(self): |
| try: |
| # Write out many bytes from many threads and test they were |
| # all flushed. |
| N = 1000 |
| contents = bytes(range(256)) * N |
| sizes = cycle([1, 19]) |
| n = 0 |
| queue = deque() |
| while n < len(contents): |
| size = next(sizes) |
| queue.append(contents[n:n+size]) |
| n += size |
| del contents |
| # We use a real file object because it allows us to |
| # exercise situations where the GIL is released before |
| # writing the buffer to the raw streams. This is in addition |
| # to concurrency issues due to switching threads in the middle |
| # of Python code. |
| with self.open(support.TESTFN, self.write_mode, buffering=0) as raw: |
| bufio = self.tp(raw, 8) |
| errors = [] |
| def f(): |
| try: |
| while True: |
| try: |
| s = queue.popleft() |
| except IndexError: |
| return |
| bufio.write(s) |
| except Exception as e: |
| errors.append(e) |
| raise |
| threads = [threading.Thread(target=f) for x in range(20)] |
| for t in threads: |
| t.start() |
| time.sleep(0.02) # yield |
| for t in threads: |
| t.join() |
| self.assertFalse(errors, |
| "the following exceptions were caught: %r" % errors) |
| bufio.close() |
| with self.open(support.TESTFN, "rb") as f: |
| s = f.read() |
| for i in range(256): |
| self.assertEqual(s.count(bytes([i])), N) |
| finally: |
| support.unlink(support.TESTFN) |
| |
| def test_misbehaved_io(self): |
| rawio = self.MisbehavedRawIO() |
| bufio = self.tp(rawio, 5) |
| self.assertRaises(IOError, bufio.seek, 0) |
| self.assertRaises(IOError, bufio.tell) |
| self.assertRaises(IOError, bufio.write, b"abcdef") |
| |
| def test_max_buffer_size_removal(self): |
| with self.assertRaises(TypeError): |
| self.tp(self.MockRawIO(), 8, 12) |
| |
| def test_write_error_on_close(self): |
| raw = self.MockRawIO() |
| def bad_write(b): |
| raise IOError() |
| raw.write = bad_write |
| b = self.tp(raw) |
| b.write(b'spam') |
| self.assertRaises(IOError, b.close) # exception not swallowed |
| self.assertTrue(b.closed) |
| |
| |
| class CBufferedWriterTest(BufferedWriterTest, SizeofTest): |
| tp = io.BufferedWriter |
| |
| def test_constructor(self): |
| BufferedWriterTest.test_constructor(self) |
| # The allocation can succeed on 32-bit builds, e.g. with more |
| # than 2GB RAM and a 64-bit kernel. |
| if sys.maxsize > 0x7FFFFFFF: |
| rawio = self.MockRawIO() |
| bufio = self.tp(rawio) |
| self.assertRaises((OverflowError, MemoryError, ValueError), |
| bufio.__init__, rawio, sys.maxsize) |
| |
| def test_initialization(self): |
| rawio = self.MockRawIO() |
| bufio = self.tp(rawio) |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=0) |
| self.assertRaises(ValueError, bufio.write, b"def") |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=-16) |
| self.assertRaises(ValueError, bufio.write, b"def") |
| self.assertRaises(ValueError, bufio.__init__, rawio, buffer_size=-1) |
| self.assertRaises(ValueError, bufio.write, b"def") |
| |
| def test_garbage_collection(self): |
| # C BufferedWriter objects are collected, and collecting them flushes |
| # all data to disk. |
| # The Python version has __del__, so it ends into gc.garbage instead |
| rawio = self.FileIO(support.TESTFN, "w+b") |
| f = self.tp(rawio) |
| f.write(b"123xxx") |
| f.x = f |
| wr = weakref.ref(f) |
| del f |
| support.gc_collect() |
| self.assertTrue(wr() is None, wr) |
| with self.open(support.TESTFN, "rb") as f: |
| self.assertEqual(f.read(), b"123xxx") |
| |
| def test_args_error(self): |
| # Issue #17275 |
| with self.assertRaisesRegex(TypeError, "BufferedWriter"): |
| self.tp(io.BytesIO(), 1024, 1024, 1024) |
| |
| |
| class PyBufferedWriterTest(BufferedWriterTest): |
| tp = pyio.BufferedWriter |
| |
| class BufferedRWPairTest(unittest.TestCase): |
| |
| def test_constructor(self): |
| pair = self.tp(self.MockRawIO(), self.MockRawIO()) |
| self.assertFalse(pair.closed) |
| |
| def test_detach(self): |
| pair = self.tp(self.MockRawIO(), self.MockRawIO()) |
| self.assertRaises(self.UnsupportedOperation, pair.detach) |
| |
| def test_constructor_max_buffer_size_removal(self): |
| with self.assertRaises(TypeError): |
| self.tp(self.MockRawIO(), self.MockRawIO(), 8, 12) |
| |
| def test_constructor_with_not_readable(self): |
| class NotReadable(MockRawIO): |
| def readable(self): |
| return False |
| |
| self.assertRaises(IOError, self.tp, NotReadable(), self.MockRawIO()) |
| |
| def test_constructor_with_not_writeable(self): |
| class NotWriteable(MockRawIO): |
| def writable(self): |
| return False |
| |
| self.assertRaises(IOError, self.tp, self.MockRawIO(), NotWriteable()) |
| |
| def test_read(self): |
| pair = self.tp(self.BytesIO(b"abcdef"), self.MockRawIO()) |
| |
| self.assertEqual(pair.read(3), b"abc") |
| self.assertEqual(pair.read(1), b"d") |
| self.assertEqual(pair.read(), b"ef") |
| pair = self.tp(self.BytesIO(b"abc"), self.MockRawIO()) |
| self.assertEqual(pair.read(None), b"abc") |
| |
| def test_readlines(self): |
| pair = lambda: self.tp(self.BytesIO(b"abc\ndef\nh"), self.MockRawIO()) |
| self.assertEqual(pair().readlines(), [b"abc\n", b"def\n", b"h"]) |
| self.assertEqual(pair().readlines(), [b"abc\n", b"def\n", b"h"]) |
| self.assertEqual(pair().readlines(5), [b"abc\n", b"def\n"]) |
| |
| def test_read1(self): |
| # .read1() is delegated to the underlying reader object, so this test |
| # can be shallow. |
| pair = self.tp(self.BytesIO(b"abcdef"), self.MockRawIO()) |
| |
| self.assertEqual(pair.read1(3), b"abc") |
| |
| def test_readinto(self): |
| pair = self.tp(self.BytesIO(b"abcdef"), self.MockRawIO()) |
| |
| data = bytearray(5) |
| self.assertEqual(pair.readinto(data), 5) |
| self.assertEqual(data, b"abcde") |
| |
| def test_write(self): |
| w = self.MockRawIO() |
| pair = self.tp(self.MockRawIO(), w) |
| |
| pair.write(b"abc") |
| pair.flush() |
| pair.write(b"def") |
| pair.flush() |
| self.assertEqual(w._write_stack, [b"abc", b"def"]) |
| |
| def test_peek(self): |
| pair = self.tp(self.BytesIO(b"abcdef"), self.MockRawIO()) |
| |
| self.assertTrue(pair.peek(3).startswith(b"abc")) |
| self.assertEqual(pair.read(3), b"abc") |
| |
| def test_readable(self): |
| pair = self.tp(self.MockRawIO(), self.MockRawIO()) |
| self.assertTrue(pair.readable()) |
| |
| def test_writeable(self): |
| pair = self.tp(self.MockRawIO(), self.MockRawIO()) |
| self.assertTrue(pair.writable()) |
| |
| def test_seekable(self): |
| # BufferedRWPairs are never seekable, even if their readers and writers |
| # are. |
| pair = self.tp(self.MockRawIO(), self.MockRawIO()) |
| self.assertFalse(pair.seekable()) |
| |
| # .flush() is delegated to the underlying writer object and has been |
| # tested in the test_write method. |
| |
| def test_close_and_closed(self): |
| pair = self.tp(self.MockRawIO(), self.MockRawIO()) |
| self.assertFalse(pair.closed) |
| pair.close() |
| self.assertTrue(pair.closed) |
| |
| def test_isatty(self): |
| class SelectableIsAtty(MockRawIO): |
| def __init__(self, isatty): |
| MockRawIO.__init__(self) |
| self._isatty = isatty |
| |
| def isatty(self): |
| return self._isatty |
| |
| pair = self.tp(SelectableIsAtty(False), SelectableIsAtty(False)) |
| self.assertFalse(pair.isatty()) |
| |
| pair = self.tp(SelectableIsAtty(True), SelectableIsAtty(False)) |
| self.assertTrue(pair.isatty()) |
| |
| pair = self.tp(SelectableIsAtty(False), SelectableIsAtty(True)) |
| self.assertTrue(pair.isatty()) |
| |
| pair = self.tp(SelectableIsAtty(True), SelectableIsAtty(True)) |
| self.assertTrue(pair.isatty()) |
| |
| class CBufferedRWPairTest(BufferedRWPairTest): |
| tp = io.BufferedRWPair |
| |
| class PyBufferedRWPairTest(BufferedRWPairTest): |
| tp = pyio.BufferedRWPair |
| |
| |
| class BufferedRandomTest(BufferedReaderTest, BufferedWriterTest): |
| read_mode = "rb+" |
| write_mode = "wb+" |
| |
| def test_constructor(self): |
| BufferedReaderTest.test_constructor(self) |
| BufferedWriterTest.test_constructor(self) |
| |
| def test_read_and_write(self): |
| raw = self.MockRawIO((b"asdf", b"ghjk")) |
| rw = self.tp(raw, 8) |
| |
| self.assertEqual(b"as", rw.read(2)) |
| rw.write(b"ddd") |
| rw.write(b"eee") |
| self.assertFalse(raw._write_stack) # Buffer writes |
| self.assertEqual(b"ghjk", rw.read()) |
| self.assertEqual(b"dddeee", raw._write_stack[0]) |
| |
| def test_seek_and_tell(self): |
| raw = self.BytesIO(b"asdfghjkl") |
| rw = self.tp(raw) |
| |
| self.assertEqual(b"as", rw.read(2)) |
| self.assertEqual(2, rw.tell()) |
| rw.seek(0, 0) |
| self.assertEqual(b"asdf", rw.read(4)) |
| |
| rw.write(b"123f") |
| rw.seek(0, 0) |
| self.assertEqual(b"asdf123fl", rw.read()) |
| self.assertEqual(9, rw.tell()) |
| rw.seek(-4, 2) |
| self.assertEqual(5, rw.tell()) |
| rw.seek(2, 1) |
| self.assertEqual(7, rw.tell()) |
| self.assertEqual(b"fl", rw.read(11)) |
| rw.flush() |
| self.assertEqual(b"asdf123fl", raw.getvalue()) |
| |
| self.assertRaises(TypeError, rw.seek, 0.0) |
| |
| def check_flush_and_read(self, read_func): |
| raw = self.BytesIO(b"abcdefghi") |
| bufio = self.tp(raw) |
| |
| self.assertEqual(b"ab", read_func(bufio, 2)) |
| bufio.write(b"12") |
| self.assertEqual(b"ef", read_func(bufio, 2)) |
| self.assertEqual(6, bufio.tell()) |
| bufio.flush() |
| self.assertEqual(6, bufio.tell()) |
| self.assertEqual(b"ghi", read_func(bufio)) |
| raw.seek(0, 0) |
| raw.write(b"XYZ") |
| # flush() resets the read buffer |
| bufio.flush() |
| bufio.seek(0, 0) |
| self.assertEqual(b"XYZ", read_func(bufio, 3)) |
| |
| def test_flush_and_read(self): |
| self.check_flush_and_read(lambda bufio, *args: bufio.read(*args)) |
| |
| def test_flush_and_readinto(self): |
| def _readinto(bufio, n=-1): |
| b = bytearray(n if n >= 0 else 9999) |
| n = bufio.readinto(b) |
| return bytes(b[:n]) |
| self.check_flush_and_read(_readinto) |
| |
| def test_flush_and_peek(self): |
| def _peek(bufio, n=-1): |
| # This relies on the fact that the buffer can contain the whole |
| # raw stream, otherwise peek() can return less. |
| b = bufio.peek(n) |
| if n != -1: |
| b = b[:n] |
| bufio.seek(len(b), 1) |
| return b |
| self.check_flush_and_read(_peek) |
| |
| def test_flush_and_write(self): |
| raw = self.BytesIO(b"abcdefghi") |
| bufio = self.tp(raw) |
| |
| bufio.write(b"123") |
| bufio.flush() |
| bufio.write(b"45") |
| bufio.flush() |
| bufio.seek(0, 0) |
| self.assertEqual(b"12345fghi", raw.getvalue()) |
| self.assertEqual(b"12345fghi", bufio.read()) |
| |
| def test_threads(self): |
| BufferedReaderTest.test_threads(self) |
| BufferedWriterTest.test_threads(self) |
| |
| def test_writes_and_peek(self): |
| def _peek(bufio): |
| bufio.peek(1) |
| self.check_writes(_peek) |
| def _peek(bufio): |
| pos = bufio.tell() |
| bufio.seek(-1, 1) |
| bufio.peek(1) |
| bufio.seek(pos, 0) |
| self.check_writes(_peek) |
| |
| def test_writes_and_reads(self): |
| def _read(bufio): |
| bufio.seek(-1, 1) |
| bufio.read(1) |
| self.check_writes(_read) |
| |
| def test_writes_and_read1s(self): |
| def _read1(bufio): |
| bufio.seek(-1, 1) |
| bufio.read1(1) |
| self.check_writes(_read1) |
| |
| def test_writes_and_readintos(self): |
| def _read(bufio): |
| bufio.seek(-1, 1) |
| bufio.readinto(bytearray(1)) |
| self.check_writes(_read) |
| |
| def test_write_after_readahead(self): |
| # Issue #6629: writing after the buffer was filled by readahead should |
| # first rewind the raw stream. |
| for overwrite_size in [1, 5]: |
| raw = self.BytesIO(b"A" * 10) |
| bufio = self.tp(raw, 4) |
| # Trigger readahead |
| self.assertEqual(bufio.read(1), b"A") |
| self.assertEqual(bufio.tell(), 1) |
| # Overwriting should rewind the raw stream if it needs so |
| bufio.write(b"B" * overwrite_size) |
| self.assertEqual(bufio.tell(), overwrite_size + 1) |
| # If the write size was smaller than the buffer size, flush() and |
| # check that rewind happens. |
| bufio.flush() |
| self.assertEqual(bufio.tell(), overwrite_size + 1) |
| s = raw.getvalue() |
| self.assertEqual(s, |
| b"A" + b"B" * overwrite_size + b"A" * (9 - overwrite_size)) |
| |
| def test_write_rewind_write(self): |
| # Various combinations of reading / writing / seeking backwards / writing again |
| def mutate(bufio, pos1, pos2): |
| assert pos2 >= pos1 |
| # Fill the buffer |
| bufio.seek(pos1) |
| bufio.read(pos2 - pos1) |
| bufio.write(b'\x02') |
| # This writes earlier than the previous write, but still inside |
| # the buffer. |
| bufio.seek(pos1) |
| bufio.write(b'\x01') |
| |
| b = b"\x80\x81\x82\x83\x84" |
| for i in range(0, len(b)): |
| for j in range(i, len(b)): |
| raw = self.BytesIO(b) |
| bufio = self.tp(raw, 100) |
| mutate(bufio, i, j) |
| bufio.flush() |
| expected = bytearray(b) |
| expected[j] = 2 |
| expected[i] = 1 |
| self.assertEqual(raw.getvalue(), expected, |
| "failed result for i=%d, j=%d" % (i, j)) |
| |
| def test_truncate_after_read_or_write(self): |
| raw = self.BytesIO(b"A" * 10) |
| bufio = self.tp(raw, 100) |
| self.assertEqual(bufio.read(2), b"AA") # the read buffer gets filled |
| self.assertEqual(bufio.truncate(), 2) |
| self.assertEqual(bufio.write(b"BB"), 2) # the write buffer increases |
| self.assertEqual(bufio.truncate(), 4) |
| |
| def test_misbehaved_io(self): |
| BufferedReaderTest.test_misbehaved_io(self) |
| BufferedWriterTest.test_misbehaved_io(self) |
| |
| def test_interleaved_read_write(self): |
| # Test for issue #12213 |
| with self.BytesIO(b'abcdefgh') as raw: |
| with self.tp(raw, 100) as f: |
| f.write(b"1") |
| self.assertEqual(f.read(1), b'b') |
| f.write(b'2') |
| self.assertEqual(f.read1(1), b'd') |
| f.write(b'3') |
| buf = bytearray(1) |
| f.readinto(buf) |
| self.assertEqual(buf, b'f') |
| f.write(b'4') |
| self.assertEqual(f.peek(1), b'h') |
| f.flush() |
| self.assertEqual(raw.getvalue(), b'1b2d3f4h') |
| |
| with self.BytesIO(b'abc') as raw: |
| with self.tp(raw, 100) as f: |
| self.assertEqual(f.read(1), b'a') |
| f.write(b"2") |
| self.assertEqual(f.read(1), b'c') |
| f.flush() |
| self.assertEqual(raw.getvalue(), b'a2c') |
| |
| def test_interleaved_readline_write(self): |
| with self.BytesIO(b'ab\ncdef\ng\n') as raw: |
| with self.tp(raw) as f: |
| f.write(b'1') |
| self.assertEqual(f.readline(), b'b\n') |
| f.write(b'2') |
| self.assertEqual(f.readline(), b'def\n') |
| f.write(b'3') |
| self.assertEqual(f.readline(), b'\n') |
| f.flush() |
| self.assertEqual(raw.getvalue(), b'1b\n2def\n3\n') |
| |
| # You can't construct a BufferedRandom over a non-seekable stream. |
| test_unseekable = None |
| |
| |
| class CBufferedRandomTest(BufferedRandomTest, SizeofTest): |
| tp = io.BufferedRandom |
| |
| def test_constructor(self): |
| BufferedRandomTest.test_constructor(self) |
| # The allocation can succeed on 32-bit builds, e.g. with more |
| # than 2GB RAM and a 64-bit kernel. |
| if sys.maxsize > 0x7FFFFFFF: |
| rawio = self.MockRawIO() |
| bufio = self.tp(rawio) |
| self.assertRaises((OverflowError, MemoryError, ValueError), |
| bufio.__init__, rawio, sys.maxsize) |
| |
| def test_garbage_collection(self): |
| CBufferedReaderTest.test_garbage_collection(self) |
| CBufferedWriterTest.test_garbage_collection(self) |
| |
| def test_args_error(self): |
| # Issue #17275 |
| with self.assertRaisesRegex(TypeError, "BufferedRandom"): |
| self.tp(io.BytesIO(), 1024, 1024, 1024) |
| |
| |
| class PyBufferedRandomTest(BufferedRandomTest): |
| tp = pyio.BufferedRandom |
| |
| |
| # To fully exercise seek/tell, the StatefulIncrementalDecoder has these |
| # properties: |
| # - A single output character can correspond to many bytes of input. |
| # - The number of input bytes to complete the character can be |
| # undetermined until the last input byte is received. |
| # - The number of input bytes can vary depending on previous input. |
| # - A single input byte can correspond to many characters of output. |
| # - The number of output characters can be undetermined until the |
| # last input byte is received. |
| # - The number of output characters can vary depending on previous input. |
| |
| class StatefulIncrementalDecoder(codecs.IncrementalDecoder): |
| """ |
| For testing seek/tell behavior with a stateful, buffering decoder. |
| |
| Input is a sequence of words. Words may be fixed-length (length set |
| by input) or variable-length (period-terminated). In variable-length |
| mode, extra periods are ignored. Possible words are: |
| - 'i' followed by a number sets the input length, I (maximum 99). |
| When I is set to 0, words are space-terminated. |
| - 'o' followed by a number sets the output length, O (maximum 99). |
| - Any other word is converted into a word followed by a period on |
| the output. The output word consists of the input word truncated |
| or padded out with hyphens to make its length equal to O. If O |
| is 0, the word is output verbatim without truncating or padding. |
| I and O are initially set to 1. When I changes, any buffered input is |
| re-scanned according to the new I. EOF also terminates the last word. |
| """ |
| |
| def __init__(self, errors='strict'): |
| codecs.IncrementalDecoder.__init__(self, errors) |
| self.reset() |
| |
| def __repr__(self): |
| return '<SID %x>' % id(self) |
| |
| def reset(self): |
| self.i = 1 |
| self.o = 1 |
| self.buffer = bytearray() |
| |
| def getstate(self): |
| i, o = self.i ^ 1, self.o ^ 1 # so that flags = 0 after reset() |
| return bytes(self.buffer), i*100 + o |
| |
| def setstate(self, state): |
| buffer, io = state |
| self.buffer = bytearray(buffer) |
| i, o = divmod(io, 100) |
| self.i, self.o = i ^ 1, o ^ 1 |
| |
| def decode(self, input, final=False): |
| output = '' |
| for b in input: |
| if self.i == 0: # variable-length, terminated with period |
| if b == ord('.'): |
| if self.buffer: |
| output += self.process_word() |
| else: |
| self.buffer.append(b) |
| else: # fixed-length, terminate after self.i bytes |
| self.buffer.append(b) |
| if len(self.buffer) == self.i: |
| output += self.process_word() |
| if final and self.buffer: # EOF terminates the last word |
| output += self.process_word() |
| return output |
| |
| def process_word(self): |
| output = '' |
| if self.buffer[0] == ord('i'): |
| self.i = min(99, int(self.buffer[1:] or 0)) # set input length |
| elif self.buffer[0] == ord('o'): |
| self.o = min(99, int(self.buffer[1:] or 0)) # set output length |
| else: |
| output = self.buffer.decode('ascii') |
| if len(output) < self.o: |
| output += '-'*self.o # pad out with hyphens |
| if self.o: |
| output = output[:self.o] # truncate to output length |
| output += '.' |
| self.buffer = bytearray() |
| return output |
| |
| codecEnabled = False |
| |
| @classmethod |
| def lookupTestDecoder(cls, name): |
| if cls.codecEnabled and name == 'test_decoder': |
| latin1 = codecs.lookup('latin-1') |
| return codecs.CodecInfo( |
| name='test_decoder', encode=latin1.encode, decode=None, |
| incrementalencoder=None, |
| streamreader=None, streamwriter=None, |
| incrementaldecoder=cls) |
| |
| # Register the previous decoder for testing. |
| # Disabled by default, tests will enable it. |
| codecs.register(StatefulIncrementalDecoder.lookupTestDecoder) |
| |
| |
| class StatefulIncrementalDecoderTest(unittest.TestCase): |
| """ |
| Make sure the StatefulIncrementalDecoder actually works. |
| """ |
| |
| test_cases = [ |
| # I=1, O=1 (fixed-length input == fixed-length output) |
| (b'abcd', False, 'a.b.c.d.'), |
| # I=0, O=0 (variable-length input, variable-length output) |
| (b'oiabcd', True, 'abcd.'), |
| # I=0, O=0 (should ignore extra periods) |
| (b'oi...abcd...', True, 'abcd.'), |
| # I=0, O=6 (variable-length input, fixed-length output) |
| (b'i.o6.x.xyz.toolongtofit.', False, 'x-----.xyz---.toolon.'), |
| # I=2, O=6 (fixed-length input < fixed-length output) |
| (b'i.i2.o6xyz', True, 'xy----.z-----.'), |
| # I=6, O=3 (fixed-length input > fixed-length output) |
| (b'i.o3.i6.abcdefghijklmnop', True, 'abc.ghi.mno.'), |
| # I=0, then 3; O=29, then 15 (with longer output) |
| (b'i.o29.a.b.cde.o15.abcdefghijabcdefghij.i3.a.b.c.d.ei00k.l.m', True, |
| 'a----------------------------.' + |
| 'b----------------------------.' + |
| 'cde--------------------------.' + |
| 'abcdefghijabcde.' + |
| 'a.b------------.' + |
| '.c.------------.' + |
| 'd.e------------.' + |
| 'k--------------.' + |
| 'l--------------.' + |
| 'm--------------.') |
| ] |
| |
| def test_decoder(self): |
| # Try a few one-shot test cases. |
| for input, eof, output in self.test_cases: |
| d = StatefulIncrementalDecoder() |
| self.assertEqual(d.decode(input, eof), output) |
| |
| # Also test an unfinished decode, followed by forcing EOF. |
| d = StatefulIncrementalDecoder() |
| self.assertEqual(d.decode(b'oiabcd'), '') |
| self.assertEqual(d.decode(b'', 1), 'abcd.') |
| |
| class TextIOWrapperTest(unittest.TestCase): |
| |
| def setUp(self): |
| self.testdata = b"AAA\r\nBBB\rCCC\r\nDDD\nEEE\r\n" |
| self.normalized = b"AAA\nBBB\nCCC\nDDD\nEEE\n".decode("ascii") |
| support.unlink(support.TESTFN) |
| |
| def tearDown(self): |
| support.unlink(support.TESTFN) |
| |
| def test_constructor(self): |
| r = self.BytesIO(b"\xc3\xa9\n\n") |
| b = self.BufferedReader(r, 1000) |
| t = self.TextIOWrapper(b) |
| t.__init__(b, encoding="latin-1", newline="\r\n") |
| self.assertEqual(t.encoding, "latin-1") |
| self.assertEqual(t.line_buffering, False) |
| t.__init__(b, encoding="utf-8", line_buffering=True) |
| self.assertEqual(t.encoding, "utf-8") |
| self.assertEqual(t.line_buffering, True) |
| self.assertEqual("\xe9\n", t.readline()) |
| self.assertRaises(TypeError, t.__init__, b, newline=42) |
| self.assertRaises(ValueError, t.__init__, b, newline='xyzzy') |
| |
| def test_detach(self): |
| r = self.BytesIO() |
| b = self.BufferedWriter(r) |
| t = self.TextIOWrapper(b) |
| self.assertIs(t.detach(), b) |
| |
| t = self.TextIOWrapper(b, encoding="ascii") |
| t.write("howdy") |
| self.assertFalse(r.getvalue()) |
| t.detach() |
| self.assertEqual(r.getvalue(), b"howdy") |
| self.assertRaises(ValueError, t.detach) |
| |
| def test_repr(self): |
| raw = self.BytesIO("hello".encode("utf-8")) |
| b = self.BufferedReader(raw) |
| t = self.TextIOWrapper(b, encoding="utf-8") |
| modname = self.TextIOWrapper.__module__ |
| self.assertEqual(repr(t), |
| "<%s.TextIOWrapper encoding='utf-8'>" % modname) |
| raw.name = "dummy" |
| self.assertEqual(repr(t), |
| "<%s.TextIOWrapper name='dummy' encoding='utf-8'>" % modname) |
| t.mode = "r" |
| self.assertEqual(repr(t), |
| "<%s.TextIOWrapper name='dummy' mode='r' encoding='utf-8'>" % modname) |
| raw.name = b"dummy" |
| self.assertEqual(repr(t), |
| "<%s.TextIOWrapper name=b'dummy' mode='r' encoding='utf-8'>" % modname) |
| |
| def test_line_buffering(self): |
| r = self.BytesIO() |
| b = self.BufferedWriter(r, 1000) |
| t = self.TextIOWrapper(b, newline="\n", line_buffering=True) |
| t.write("X") |
| self.assertEqual(r.getvalue(), b"") # No flush happened |
| t.write("Y\nZ") |
| self.assertEqual(r.getvalue(), b"XY\nZ") # All got flushed |
| t.write("A\rB") |
| self.assertEqual(r.getvalue(), b"XY\nZA\rB") |
| |
| def test_default_encoding(self): |
| old_environ = dict(os.environ) |
| try: |
| # try to get a user preferred encoding different than the current |
| # locale encoding to check that TextIOWrapper() uses the current |
| # locale encoding and not the user preferred encoding |
| for key in ('LC_ALL', 'LANG', 'LC_CTYPE'): |
| if key in os.environ: |
| del os.environ[key] |
| |
| current_locale_encoding = locale.getpreferredencoding(False) |
| b = self.BytesIO() |
| t = self.TextIOWrapper(b) |
| self.assertEqual(t.encoding, current_locale_encoding) |
| finally: |
| os.environ.clear() |
| os.environ.update(old_environ) |
| |
| # Issue 15989 |
| def test_device_encoding(self): |
| b = self.BytesIO() |
| b.fileno = lambda: _testcapi.INT_MAX + 1 |
| self.assertRaises(OverflowError, self.TextIOWrapper, b) |
| b.fileno = lambda: _testcapi.UINT_MAX + 1 |
| self.assertRaises(OverflowError, self.TextIOWrapper, b) |
| |
| def test_encoding(self): |
| # Check the encoding attribute is always set, and valid |
| b = self.BytesIO() |
| t = self.TextIOWrapper(b, encoding="utf-8") |
| self.assertEqual(t.encoding, "utf-8") |
| t = self.TextIOWrapper(b) |
| self.assertTrue(t.encoding is not None) |
| codecs.lookup(t.encoding) |
| |
| def test_encoding_errors_reading(self): |
| # (1) default |
| b = self.BytesIO(b"abc\n\xff\n") |
| t = self.TextIOWrapper(b, encoding="ascii") |
| self.assertRaises(UnicodeError, t.read) |
| # (2) explicit strict |
| b = self.BytesIO(b"abc\n\xff\n") |
| t = self.TextIOWrapper(b, encoding="ascii", errors="strict") |
| self.assertRaises(UnicodeError, t.read) |
| # (3) ignore |
| b = self.BytesIO(b"abc\n\xff\n") |
| t = self.TextIOWrapper(b, encoding="ascii", errors="ignore") |
| self.assertEqual(t.read(), "abc\n\n") |
| # (4) replace |
| b = self.BytesIO(b"abc\n\xff\n") |
| t = self.TextIOWrapper(b, encoding="ascii", errors="replace") |
| self.assertEqual(t.read(), "abc\n\ufffd\n") |
| |
| def test_encoding_errors_writing(self): |
| # (1) default |
| b = self.BytesIO() |
| t = self.TextIOWrapper(b, encoding="ascii") |
| self.assertRaises(UnicodeError, t.write, "\xff") |
| # (2) explicit strict |
| b = self.BytesIO() |
| t = self.TextIOWrapper(b, encoding="ascii", errors="strict") |
| self.assertRaises(UnicodeError, t.write, "\xff") |
| # (3) ignore |
| b = self.BytesIO() |
| t = self.TextIOWrapper(b, encoding="ascii", errors="ignore", |
| newline="\n") |
| t.write("abc\xffdef\n") |
| t.flush() |
| self.assertEqual(b.getvalue(), b"abcdef\n") |
| # (4) replace |
| b = self.BytesIO() |
| t = self.TextIOWrapper(b, encoding="ascii", errors="replace", |
| newline="\n") |
| t.write("abc\xffdef\n") |
| t.flush() |
| self.assertEqual(b.getvalue(), b"abc?def\n") |
| |
| def test_newlines(self): |
| input_lines = [ "unix\n", "windows\r\n", "os9\r", "last\n", "nonl" ] |
| |
| tests = [ |
| [ None, [ 'unix\n', 'windows\n', 'os9\n', 'last\n', 'nonl' ] ], |
| [ '', input_lines ], |
| [ '\n', [ "unix\n", "windows\r\n", "os9\rlast\n", "nonl" ] ], |
| [ '\r\n', [ "unix\nwindows\r\n", "os9\rlast\nnonl" ] ], |
| [ '\r', [ "unix\nwindows\r", "\nos9\r", "last\nnonl" ] ], |
| ] |
| encodings = ( |
| 'utf-8', 'latin-1', |
| 'utf-16', 'utf-16-le', 'utf-16-be', |
| 'utf-32', 'utf-32-le', 'utf-32-be', |
| ) |
| |
| # Try a range of buffer sizes to test the case where \r is the last |
| # character in TextIOWrapper._pending_line. |
| for encoding in encodings: |
| # XXX: str.encode() should return bytes |
| data = bytes(''.join(input_lines).encode(encoding)) |
| for do_reads in (False, True): |
| for bufsize in range(1, 10): |
| for newline, exp_lines in tests: |
| bufio = self.BufferedReader(self.BytesIO(data), bufsize) |
| textio = self.TextIOWrapper(bufio, newline=newline, |
| encoding=encoding) |
| if do_reads: |
| got_lines = [] |
| while True: |
| c2 = textio.read(2) |
| if c2 == '': |
| break |
| self.assertEqual(len(c2), 2) |
| got_lines.append(c2 + textio.readline()) |
| else: |
| got_lines = list(textio) |
| |
| for got_line, exp_line in zip(got_lines, exp_lines): |
| self.assertEqual(got_line, exp_line) |
| self.assertEqual(len(got_lines), len(exp_lines)) |
| |
| def test_newlines_input(self): |
| testdata = b"AAA\nBB\x00B\nCCC\rDDD\rEEE\r\nFFF\r\nGGG" |
| normalized = testdata.replace(b"\r\n", b"\n").replace(b"\r", b"\n") |
| for newline, expected in [ |
| (None, normalized.decode("ascii").splitlines(keepends=True)), |
| ("", testdata.decode("ascii").splitlines(keepends=True)), |
| ("\n", ["AAA\n", "BB\x00B\n", "CCC\rDDD\rEEE\r\n", "FFF\r\n", "GGG"]), |
| ("\r\n", ["AAA\nBB\x00B\nCCC\rDDD\rEEE\r\n", "FFF\r\n", "GGG"]), |
| ("\r", ["AAA\nBB\x00B\nCCC\r", "DDD\r", "EEE\r", "\nFFF\r", "\nGGG"]), |
| ]: |
| buf = self.BytesIO(testdata) |
| txt = self.TextIOWrapper(buf, encoding="ascii", newline=newline) |
| self.assertEqual(txt.readlines(), expected) |
| txt.seek(0) |
| self.assertEqual(txt.read(), "".join(expected)) |
| |
| def test_newlines_output(self): |
| testdict = { |
| "": b"AAA\nBBB\nCCC\nX\rY\r\nZ", |
| "\n": b"AAA\nBBB\nCCC\nX\rY\r\nZ", |
| "\r": b"AAA\rBBB\rCCC\rX\rY\r\rZ", |
| "\r\n": b"AAA\r\nBBB\r\nCCC\r\nX\rY\r\r\nZ", |
| } |
| tests = [(None, testdict[os.linesep])] + sorted(testdict.items()) |
| for newline, expected in tests: |
| buf = self.BytesIO() |
| txt = self.TextIOWrapper(buf, encoding="ascii", newline=newline) |
| txt.write("AAA\nB") |
| txt.write("BB\nCCC\n") |
| txt.write("X\rY\r\nZ") |
| txt.flush() |
| self.assertEqual(buf.closed, False) |
| self.assertEqual(buf.getvalue(), expected) |
| |
| def test_destructor(self): |
| l = [] |
| base = self.BytesIO |
| class MyBytesIO(base): |
| def close(self): |
| l.append(self.getvalue()) |
| base.close(self) |
| b = MyBytesIO() |
| t = self.TextIOWrapper(b, encoding="ascii") |
| t.write("abc") |
| del t |
| support.gc_collect() |
| self.assertEqual([b"abc"], l) |
| |
| def test_override_destructor(self): |
| record = [] |
| class MyTextIO(self.TextIOWrapper): |
| def __del__(self): |
| record.append(1) |
| try: |
| f = super().__del__ |
| except AttributeError: |
| pass |
| else: |
| f() |
| def close(self): |
| record.append(2) |
| super().close() |
| def flush(self): |
| record.append(3) |
| super().flush() |
| b = self.BytesIO() |
| t = MyTextIO(b, encoding="ascii") |
| del t |
| support.gc_collect() |
| self.assertEqual(record, [1, 2, 3]) |
| |
| def test_error_through_destructor(self): |
| # Test that the exception state is not modified by a destructor, |
| # even if close() fails. |
| rawio = self.CloseFailureIO() |
| def f(): |
| self.TextIOWrapper(rawio).xyzzy |
| with support.captured_output("stderr") as s: |
| self.assertRaises(AttributeError, f) |
| s = s.getvalue().strip() |
| if s: |
| # The destructor *may* have printed an unraisable error, check it |
| self.assertEqual(len(s.splitlines()), 1) |
| self.assertTrue(s.startswith("Exception IOError: "), s) |
| self.assertTrue(s.endswith(" ignored"), s) |
| |
| # Systematic tests of the text I/O API |
| |
| def test_basic_io(self): |
| for chunksize in (1, 2, 3, 4, 5, 15, 16, 17, 31, 32, 33, 63, 64, 65): |
| for enc in "ascii", "latin-1", "utf-8" :# , "utf-16-be", "utf-16-le": |
| f = self.open(support.TESTFN, "w+", encoding=enc) |
| f._CHUNK_SIZE = chunksize |
| self.assertEqual(f.write("abc"), 3) |
| f.close() |
| f = self.open(support.TESTFN, "r+", encoding=enc) |
| f._CHUNK_SIZE = chunksize |
| self.assertEqual(f.tell(), 0) |
| self.assertEqual(f.read(), "abc") |
| cookie = f.tell() |
| self.assertEqual(f.seek(0), 0) |
| self.assertEqual(f.read(None), "abc") |
| f.seek(0) |
| self.assertEqual(f.read(2), "ab") |
| self.assertEqual(f.read(1), "c") |
| self.assertEqual(f.read(1), "") |
| self.assertEqual(f.read(), "") |
| self.assertEqual(f.tell(), cookie) |
| self.assertEqual(f.seek(0), 0) |
| self.assertEqual(f.seek(0, 2), cookie) |
| self.assertEqual(f.write("def"), 3) |
| self.assertEqual(f.seek(cookie), cookie) |
| self.assertEqual(f.read(), "def") |
| if enc.startswith("utf"): |
| self.multi_line_test(f, enc) |
| f.close() |
| |
| def multi_line_test(self, f, enc): |
| f.seek(0) |
| f.truncate() |
| sample = "s\xff\u0fff\uffff" |
| wlines = [] |
| for size in (0, 1, 2, 3, 4, 5, 30, 31, 32, 33, 62, 63, 64, 65, 1000): |
| chars = [] |
| for i in range(size): |
| chars.append(sample[i % len(sample)]) |
| line = "".join(chars) + "\n" |
| wlines.append((f.tell(), line)) |
| f.write(line) |
| f.seek(0) |
| rlines = [] |
| while True: |
| pos = f.tell() |
| line = f.readline() |
| if not line: |
| break |
| rlines.append((pos, line)) |
| self.assertEqual(rlines, wlines) |
| |
| def test_telling(self): |
| f = self.open(support.TESTFN, "w+", encoding="utf-8") |
| p0 = f.tell() |
| f.write("\xff\n") |
| p1 = f.tell() |
| f.write("\xff\n") |
| p2 = f.tell() |
| f.seek(0) |
| self.assertEqual(f.tell(), p0) |
| self.assertEqual(f.readline(), "\xff\n") |
| self.assertEqual(f.tell(), p1) |
| self.assertEqual(f.readline(), "\xff\n") |
| self.assertEqual(f.tell(), p2) |
| f.seek(0) |
| for line in f: |
| self.assertEqual(line, "\xff\n") |
| self.assertRaises(IOError, f.tell) |
| self.assertEqual(f.tell(), p2) |
| f.close() |
| |
| def test_seeking(self): |
| chunk_size = _default_chunk_size() |
| prefix_size = chunk_size - 2 |
| u_prefix = "a" * prefix_size |
| prefix = bytes(u_prefix.encode("utf-8")) |
| self.assertEqual(len(u_prefix), len(prefix)) |
| u_suffix = "\u8888\n" |
| suffix = bytes(u_suffix.encode("utf-8")) |
| line = prefix + suffix |
| with self.open(support.TESTFN, "wb") as f: |
| f.write(line*2) |
| with self.open(support.TESTFN, "r", encoding="utf-8") as f: |
| s = f.read(prefix_size) |
| self.assertEqual(s, str(prefix, "ascii")) |
| self.assertEqual(f.tell(), prefix_size) |
| self.assertEqual(f.readline(), u_suffix) |
| |
| def test_seeking_too(self): |
| # Regression test for a specific bug |
| data = b'\xe0\xbf\xbf\n' |
| with self.open(support.TESTFN, "wb") as f: |
| f.write(data) |
| with self.open(support.TESTFN, "r", encoding="utf-8") as f: |
| f._CHUNK_SIZE # Just test that it exists |
| f._CHUNK_SIZE = 2 |
| f.readline() |
| f.tell() |
| |
| def test_seek_and_tell(self): |
| #Test seek/tell using the StatefulIncrementalDecoder. |
| # Make test faster by doing smaller seeks |
| CHUNK_SIZE = 128 |
| |
| def test_seek_and_tell_with_data(data, min_pos=0): |
| """Tell/seek to various points within a data stream and ensure |
| that the decoded data returned by read() is consistent.""" |
| f = self.open(support.TESTFN, 'wb') |
| f.write(data) |
| f.close() |
| f = self.open(support.TESTFN, encoding='test_decoder') |
| f._CHUNK_SIZE = CHUNK_SIZE |
| decoded = f.read() |
| f.close() |
| |
| for i in range(min_pos, len(decoded) + 1): # seek positions |
| for j in [1, 5, len(decoded) - i]: # read lengths |
| f = self.open(support.TESTFN, encoding='test_decoder') |
| self.assertEqual(f.read(i), decoded[:i]) |
| cookie = f.tell() |
| self.assertEqual(f.read(j), decoded[i:i + j]) |
| f.seek(cookie) |
| self.assertEqual(f.read(), decoded[i:]) |
| f.close() |
| |
| # Enable the test decoder. |
| StatefulIncrementalDecoder.codecEnabled = 1 |
| |
| # Run the tests. |
| try: |
| # Try each test case. |
| for input, _, _ in StatefulIncrementalDecoderTest.test_cases: |
| test_seek_and_tell_with_data(input) |
| |
| # Position each test case so that it crosses a chunk boundary. |
| for input, _, _ in StatefulIncrementalDecoderTest.test_cases: |
| offset = CHUNK_SIZE - len(input)//2 |
| prefix = b'.'*offset |
| # Don't bother seeking into the prefix (takes too long). |
| min_pos = offset*2 |
| test_seek_and_tell_with_data(prefix + input, min_pos) |
| |
| # Ensure our test decoder won't interfere with subsequent tests. |
| finally: |
| StatefulIncrementalDecoder.codecEnabled = 0 |
| |
| def test_encoded_writes(self): |
| data = "1234567890" |
| tests = ("utf-16", |
| "utf-16-le", |
| "utf-16-be", |
| "utf-32", |
| "utf-32-le", |
| "utf-32-be") |
| for encoding in tests: |
| buf = self.BytesIO() |
| f = self.TextIOWrapper(buf, encoding=encoding) |
| # Check if the BOM is written only once (see issue1753). |
| f.write(data) |
| f.write(data) |
| f.seek(0) |
| self.assertEqual(f.read(), data * 2) |
| f.seek(0) |
| self.assertEqual(f.read(), data * 2) |
| self.assertEqual(buf.getvalue(), (data * 2).encode(encoding)) |
| |
| def test_unreadable(self): |
| class UnReadable(self.BytesIO): |
| def readable(self): |
| return False |
| txt = self.TextIOWrapper(UnReadable()) |
| self.assertRaises(IOError, txt.read) |
| |
| def test_read_one_by_one(self): |
| txt = self.TextIOWrapper(self.BytesIO(b"AA\r\nBB")) |
| reads = "" |
| while True: |
| c = txt.read(1) |
| if not c: |
| break |
| reads += c |
| self.assertEqual(reads, "AA\nBB") |
| |
| def test_readlines(self): |
| txt = self.TextIOWrapper(self.BytesIO(b"AA\nBB\nCC")) |
| self.assertEqual(txt.readlines(), ["AA\n", "BB\n", "CC"]) |
| txt.seek(0) |
| self.assertEqual(txt.readlines(None), ["AA\n", "BB\n", "CC"]) |
| txt.seek(0) |
| self.assertEqual(txt.readlines(5), ["AA\n", "BB\n"]) |
| |
| # read in amounts equal to TextIOWrapper._CHUNK_SIZE which is 128. |
| def test_read_by_chunk(self): |
| # make sure "\r\n" straddles 128 char boundary. |
| txt = self.TextIOWrapper(self.BytesIO(b"A" * 127 + b"\r\nB")) |
| reads = "" |
| while True: |
| c = txt.read(128) |
| if not c: |
| break |
| reads += c |
| self.assertEqual(reads, "A"*127+"\nB") |
| |
| def test_writelines(self): |
| l = ['ab', 'cd', 'ef'] |
| buf = self.BytesIO() |
| txt = self.TextIOWrapper(buf) |
| txt.writelines(l) |
| txt.flush() |
| self.assertEqual(buf.getvalue(), b'abcdef') |
| |
| def test_writelines_userlist(self): |
| l = UserList(['ab', 'cd', 'ef']) |
| buf = self.BytesIO() |
| txt = self.TextIOWrapper(buf) |
| txt.writelines(l) |
| txt.flush() |
| self.assertEqual(buf.getvalue(), b'abcdef') |
| |
| def test_writelines_error(self): |
| txt = self.TextIOWrapper(self.BytesIO()) |
| self.assertRaises(TypeError, txt.writelines, [1, 2, 3]) |
| self.assertRaises(TypeError, txt.writelines, None) |
| self.assertRaises(TypeError, txt.writelines, b'abc') |
| |
| def test_issue1395_1(self): |
| txt = self.TextIOWrapper(self.BytesIO(self.testdata), encoding="ascii") |
| |
| # read one char at a time |
| reads = "" |
| while True: |
| c = txt.read(1) |
| if not c: |
| break |
| reads += c |
| self.assertEqual(reads, self.normalized) |
| |
| def test_issue1395_2(self): |
| txt = self.TextIOWrapper(self.BytesIO(self.testdata), encoding="ascii") |
| txt._CHUNK_SIZE = 4 |
| |
| reads = "" |
| while True: |
| c = txt.read(4) |
| if not c: |
| break |
| reads += c |
| self.assertEqual(reads, self.normalized) |
| |
| def test_issue1395_3(self): |
| txt = self.TextIOWrapper(self.BytesIO(self.testdata), encoding="ascii") |
| txt._CHUNK_SIZE = 4 |
| |
| reads = txt.read(4) |
| reads += txt.read(4) |
| reads += txt.readline() |
| reads += txt.readline() |
| reads += txt.readline() |
| self.assertEqual(reads, self.normalized) |
| |
| def test_issue1395_4(self): |
| txt = self.TextIOWrapper(self.BytesIO(self.testdata), encoding="ascii") |
| txt._CHUNK_SIZE = 4 |
| |
| reads = txt.read(4) |
| reads += txt.read() |
| self.assertEqual(reads, self.normalized) |
| |
| def test_issue1395_5(self): |
| txt = self.TextIOWrapper(self.BytesIO(self.testdata), encoding="ascii") |
| txt._CHUNK_SIZE = 4 |
| |
| reads = txt.read(4) |
| pos = txt.tell() |
| txt.seek(0) |
| txt.seek(pos) |
| self.assertEqual(txt.read(4), "BBB\n") |
| |
| def test_issue2282(self): |
| buffer = self.BytesIO(self.testdata) |
| txt = self.TextIOWrapper(buffer, encoding="ascii") |
| |
| self.assertEqual(buffer.seekable(), txt.seekable()) |
| |
| def test_append_bom(self): |
| # The BOM is not written again when appending to a non-empty file |
| filename = support.TESTFN |
| for charset in ('utf-8-sig', 'utf-16', 'utf-32'): |
| with self.open(filename, 'w', encoding=charset) as f: |
| f.write('aaa') |
| pos = f.tell() |
| with self.open(filename, 'rb') as f: |
| self.assertEqual(f.read(), 'aaa'.encode(charset)) |
| |
| with self.open(filename, 'a', encoding=charset) as f: |
| f.write('xxx') |
| with self.open(filename, 'rb') as f: |
| self.assertEqual(f.read(), 'aaaxxx'.encode(charset)) |
| |
| def test_seek_bom(self): |
| # Same test, but when seeking manually |
| filename = support.TESTFN |
| for charset in ('utf-8-sig', 'utf-16', 'utf-32'): |
| with self.open(filename, 'w', encoding=charset) as f: |
| f.write('aaa') |
| pos = f.tell() |
| with self.open(filename, 'r+', encoding=charset) as f: |
| f.seek(pos) |
| f.write('zzz') |
| f.seek(0) |
| f.write('bbb') |
| with self.open(filename, 'rb') as f: |
| self.assertEqual(f.read(), 'bbbzzz'.encode(charset)) |
| |
| def test_errors_property(self): |
| with self.open(support.TESTFN, "w") as f: |
| self.assertEqual(f.errors, "strict") |
| with self.open(support.TESTFN, "w", errors="replace") as f: |
| self.assertEqual(f.errors, "replace") |
| |
| @support.no_tracing |
| @unittest.skipUnless(threading, 'Threading required for this test.') |
| def test_threads_write(self): |
| # Issue6750: concurrent writes could duplicate data |
| event = threading.Event() |
| with self.open(support.TESTFN, "w", buffering=1) as f: |
| def run(n): |
| text = "Thread%03d\n" % n |
| event.wait() |
| f.write(text) |
| threads = [threading.Thread(target=lambda n=x: run(n)) |
| for x in range(20)] |
| for t in threads: |
| t.start() |
| time.sleep(0.02) |
| event.set() |
| for t in threads: |
| t.join() |
| with self.open(support.TESTFN) as f: |
| content = f.read() |
| for n in range(20): |
| self.assertEqual(content.count("Thread%03d\n" % n), 1) |
| |
| def test_flush_error_on_close(self): |
| txt = self.TextIOWrapper(self.BytesIO(self.testdata), encoding="ascii") |
| def bad_flush(): |
| raise IOError() |
| txt.flush = bad_flush |
| self.assertRaises(IOError, txt.close) # exception not swallowed |
| self.assertTrue(txt.closed) |
| |
| def test_multi_close(self): |
| txt = self.TextIOWrapper(self.BytesIO(self.testdata), encoding="ascii") |
| txt.close() |
| txt.close() |
| txt.close() |
| self.assertRaises(ValueError, txt.flush) |
| |
| def test_unseekable(self): |
| txt = self.TextIOWrapper(self.MockUnseekableIO(self.testdata)) |
| self.assertRaises(self.UnsupportedOperation, txt.tell) |
| self.assertRaises(self.UnsupportedOperation, txt.seek, 0) |
| |
| def test_readonly_attributes(self): |
| txt = self.TextIOWrapper(self.BytesIO(self.testdata), encoding="ascii") |
| buf = self.BytesIO(self.testdata) |
| with self.assertRaises(AttributeError): |
| txt.buffer = buf |
| |
| def test_rawio(self): |
| # Issue #12591: TextIOWrapper must work with raw I/O objects, so |
| # that subprocess.Popen() can have the required unbuffered |
| # semantics with universal_newlines=True. |
| raw = self.MockRawIO([b'abc', b'def', b'ghi\njkl\nopq\n']) |
| txt = self.TextIOWrapper(raw, encoding='ascii', newline='\n') |
| # Reads |
| self.assertEqual(txt.read(4), 'abcd') |
| self.assertEqual(txt.readline(), 'efghi\n') |
| self.assertEqual(list(txt), ['jkl\n', 'opq\n']) |
| |
| def test_rawio_write_through(self): |
| # Issue #12591: with write_through=True, writes don't need a flush |
| raw = self.MockRawIO([b'abc', b'def', b'ghi\njkl\nopq\n']) |
| txt = self.TextIOWrapper(raw, encoding='ascii', newline='\n', |
| write_through=True) |
| txt.write('1') |
| txt.write('23\n4') |
| txt.write('5') |
| self.assertEqual(b''.join(raw._write_stack), b'123\n45') |
| |
| def test_read_nonbytes(self): |
| # Issue #17106 |
| # Crash when underlying read() returns non-bytes |
| t = self.TextIOWrapper(self.StringIO('a')) |
| self.assertRaises(TypeError, t.read, 1) |
| t = self.TextIOWrapper(self.StringIO('a')) |
| self.assertRaises(TypeError, t.readline) |
| t = self.TextIOWrapper(self.StringIO('a')) |
| self.assertRaises(TypeError, t.read) |
| |
| def test_illegal_decoder(self): |
| # Issue #17106 |
| # Crash when decoder returns non-string |
| t = self.TextIOWrapper(self.BytesIO(b'aaaaaa'), newline='\n', |
| encoding='quopri_codec') |
| self.assertRaises(TypeError, t.read, 1) |
| t = self.TextIOWrapper(self.BytesIO(b'aaaaaa'), newline='\n', |
| encoding='quopri_codec') |
| self.assertRaises(TypeError, t.readline) |
| t = self.TextIOWrapper(self.BytesIO(b'aaaaaa'), newline='\n', |
| encoding='quopri_codec') |
| self.assertRaises(TypeError, t.read) |
| |
| |
| class CTextIOWrapperTest(TextIOWrapperTest): |
| |
| def test_initialization(self): |
| r = self.BytesIO(b"\xc3\xa9\n\n") |
| b = self.BufferedReader(r, 1000) |
| t = self.TextIOWrapper(b) |
| self.assertRaises(TypeError, t.__init__, b, newline=42) |
| self.assertRaises(ValueError, t.read) |
| self.assertRaises(ValueError, t.__init__, b, newline='xyzzy') |
| self.assertRaises(ValueError, t.read) |
| |
| def test_garbage_collection(self): |
| # C TextIOWrapper objects are collected, and collecting them flushes |
| # all data to disk. |
| # The Python version has __del__, so it ends in gc.garbage instead. |
| rawio = io.FileIO(support.TESTFN, "wb") |
| b = self.BufferedWriter(rawio) |
| t = self.TextIOWrapper(b, encoding="ascii") |
| t.write("456def") |
| t.x = t |
| wr = weakref.ref(t) |
| del t |
| support.gc_collect() |
| self.assertTrue(wr() is None, wr) |
| with self.open(support.TESTFN, "rb") as f: |
| self.assertEqual(f.read(), b"456def") |
| |
| def test_rwpair_cleared_before_textio(self): |
| # Issue 13070: TextIOWrapper's finalization would crash when called |
| # after the reference to the underlying BufferedRWPair's writer got |
| # cleared by the GC. |
| for i in range(1000): |
| b1 = self.BufferedRWPair(self.MockRawIO(), self.MockRawIO()) |
| t1 = self.TextIOWrapper(b1, encoding="ascii") |
| b2 = self.BufferedRWPair(self.MockRawIO(), self.MockRawIO()) |
| t2 = self.TextIOWrapper(b2, encoding="ascii") |
| # circular references |
| t1.buddy = t2 |
| t2.buddy = t1 |
| support.gc_collect() |
| |
| |
| class PyTextIOWrapperTest(TextIOWrapperTest): |
| pass |
| |
| |
| class IncrementalNewlineDecoderTest(unittest.TestCase): |
| |
| def check_newline_decoding_utf8(self, decoder): |
| # UTF-8 specific tests for a newline decoder |
| def _check_decode(b, s, **kwargs): |
| # We exercise getstate() / setstate() as well as decode() |
| state = decoder.getstate() |
| self.assertEqual(decoder.decode(b, **kwargs), s) |
| decoder.setstate(state) |
| self.assertEqual(decoder.decode(b, **kwargs), s) |
| |
| _check_decode(b'\xe8\xa2\x88', "\u8888") |
| |
| _check_decode(b'\xe8', "") |
| _check_decode(b'\xa2', "") |
| _check_decode(b'\x88', "\u8888") |
| |
| _check_decode(b'\xe8', "") |
| _check_decode(b'\xa2', "") |
| _check_decode(b'\x88', "\u8888") |
| |
| _check_decode(b'\xe8', "") |
| self.assertRaises(UnicodeDecodeError, decoder.decode, b'', final=True) |
| |
| decoder.reset() |
| _check_decode(b'\n', "\n") |
| _check_decode(b'\r', "") |
| _check_decode(b'', "\n", final=True) |
| _check_decode(b'\r', "\n", final=True) |
| |
| _check_decode(b'\r', "") |
| _check_decode(b'a', "\na") |
| |
| _check_decode(b'\r\r\n', "\n\n") |
| _check_decode(b'\r', "") |
| _check_decode(b'\r', "\n") |
| _check_decode(b'\na', "\na") |
| |
| _check_decode(b'\xe8\xa2\x88\r\n', "\u8888\n") |
| _check_decode(b'\xe8\xa2\x88', "\u8888") |
| _check_decode(b'\n', "\n") |
| _check_decode(b'\xe8\xa2\x88\r', "\u8888") |
| _check_decode(b'\n', "\n") |
| |
| def check_newline_decoding(self, decoder, encoding): |
| result = [] |
| if encoding is not None: |
| encoder = codecs.getincrementalencoder(encoding)() |
| def _decode_bytewise(s): |
| # Decode one byte at a time |
| for b in encoder.encode(s): |
| result.append(decoder.decode(bytes([b]))) |
| else: |
| encoder = None |
| def _decode_bytewise(s): |
| # Decode one char at a time |
| for c in s: |
| result.append(decoder.decode(c)) |
| self.assertEqual(decoder.newlines, None) |
| _decode_bytewise("abc\n\r") |
| self.assertEqual(decoder.newlines, '\n') |
| _decode_bytewise("\nabc") |
| self.assertEqual(decoder.newlines, ('\n', '\r\n')) |
| _decode_bytewise("abc\r") |
| self.assertEqual(decoder.newlines, ('\n', '\r\n')) |
| _decode_bytewise("abc") |
| self.assertEqual(decoder.newlines, ('\r', '\n', '\r\n')) |
| _decode_bytewise("abc\r") |
| self.assertEqual("".join(result), "abc\n\nabcabc\nabcabc") |
| decoder.reset() |
| input = "abc" |
| if encoder is not None: |
| encoder.reset() |
| input = encoder.encode(input) |
| self.assertEqual(decoder.decode(input), "abc") |
| self.assertEqual(decoder.newlines, None) |
| |
| def test_newline_decoder(self): |
| encodings = ( |
| # None meaning the IncrementalNewlineDecoder takes unicode input |
| # rather than bytes input |
| None, 'utf-8', 'latin-1', |
| 'utf-16', 'utf-16-le', 'utf-16-be', |
| 'utf-32', 'utf-32-le', 'utf-32-be', |
| ) |
| for enc in encodings: |
| decoder = enc and codecs.getincrementaldecoder(enc)() |
| decoder = self.IncrementalNewlineDecoder(decoder, translate=True) |
| self.check_newline_decoding(decoder, enc) |
| decoder = codecs.getincrementaldecoder("utf-8")() |
| decoder = self.IncrementalNewlineDecoder(decoder, translate=True) |
| self.check_newline_decoding_utf8(decoder) |
| |
| def test_newline_bytes(self): |
| # Issue 5433: Excessive optimization in IncrementalNewlineDecoder |
| def _check(dec): |
| self.assertEqual(dec.newlines, None) |
| self.assertEqual(dec.decode("\u0D00"), "\u0D00") |
| self.assertEqual(dec.newlines, None) |
| self.assertEqual(dec.decode("\u0A00"), "\u0A00") |
| self.assertEqual(dec.newlines, None) |
| dec = self.IncrementalNewlineDecoder(None, translate=False) |
| _check(dec) |
| dec = self.IncrementalNewlineDecoder(None, translate=True) |
| _check(dec) |
| |
| class CIncrementalNewlineDecoderTest(IncrementalNewlineDecoderTest): |
| pass |
| |
| class PyIncrementalNewlineDecoderTest(IncrementalNewlineDecoderTest): |
| pass |
| |
| |
| # XXX Tests for open() |
| |
| class MiscIOTest(unittest.TestCase): |
| |
| def tearDown(self): |
| support.unlink(support.TESTFN) |
| |
| def test___all__(self): |
| for name in self.io.__all__: |
| obj = getattr(self.io, name, None) |
| self.assertTrue(obj is not None, name) |
| if name == "open": |
| continue |
| elif "error" in name.lower() or name == "UnsupportedOperation": |
| self.assertTrue(issubclass(obj, Exception), name) |
| elif not name.startswith("SEEK_"): |
| self.assertTrue(issubclass(obj, self.IOBase)) |
| |
| def test_attributes(self): |
| f = self.open(support.TESTFN, "wb", buffering=0) |
| self.assertEqual(f.mode, "wb") |
| f.close() |
| |
| f = self.open(support.TESTFN, "U") |
| self.assertEqual(f.name, support.TESTFN) |
| self.assertEqual(f.buffer.name, support.TESTFN) |
| self.assertEqual(f.buffer.raw.name, support.TESTFN) |
| self.assertEqual(f.mode, "U") |
| self.assertEqual(f.buffer.mode, "rb") |
| self.assertEqual(f.buffer.raw.mode, "rb") |
| f.close() |
| |
| f = self.open(support.TESTFN, "w+") |
| self.assertEqual(f.mode, "w+") |
| self.assertEqual(f.buffer.mode, "rb+") # Does it really matter? |
| self.assertEqual(f.buffer.raw.mode, "rb+") |
| |
| g = self.open(f.fileno(), "wb", closefd=False) |
| self.assertEqual(g.mode, "wb") |
| self.assertEqual(g.raw.mode, "wb") |
| self.assertEqual(g.name, f.fileno()) |
| self.assertEqual(g.raw.name, f.fileno()) |
| f.close() |
| g.close() |
| |
| def test_io_after_close(self): |
| for kwargs in [ |
| {"mode": "w"}, |
| {"mode": "wb"}, |
| {"mode": "w", "buffering": 1}, |
| {"mode": "w", "buffering": 2}, |
| {"mode": "wb", "buffering": 0}, |
| {"mode": "r"}, |
| {"mode": "rb"}, |
| {"mode": "r", "buffering": 1}, |
| {"mode": "r", "buffering": 2}, |
| {"mode": "rb", "buffering": 0}, |
| {"mode": "w+"}, |
| {"mode": "w+b"}, |
| {"mode": "w+", "buffering": 1}, |
| {"mode": "w+", "buffering": 2}, |
| {"mode": "w+b", "buffering": 0}, |
| ]: |
| f = self.open(support.TESTFN, **kwargs) |
| f.close() |
| self.assertRaises(ValueError, f.flush) |
| self.assertRaises(ValueError, f.fileno) |
| self.assertRaises(ValueError, f.isatty) |
| self.assertRaises(ValueError, f.__iter__) |
| if hasattr(f, "peek"): |
| self.assertRaises(ValueError, f.peek, 1) |
| self.assertRaises(ValueError, f.read) |
| if hasattr(f, "read1"): |
| self.assertRaises(ValueError, f.read1, 1024) |
| if hasattr(f, "readall"): |
| self.assertRaises(ValueError, f.readall) |
| if hasattr(f, "readinto"): |
| self.assertRaises(ValueError, f.readinto, bytearray(1024)) |
| self.assertRaises(ValueError, f.readline) |
| self.assertRaises(ValueError, f.readlines) |
| self.assertRaises(ValueError, f.seek, 0) |
| self.assertRaises(ValueError, f.tell) |
| self.assertRaises(ValueError, f.truncate) |
| self.assertRaises(ValueError, f.write, |
| b"" if "b" in kwargs['mode'] else "") |
| self.assertRaises(ValueError, f.writelines, []) |
| self.assertRaises(ValueError, next, f) |
| |
| def test_blockingioerror(self): |
| # Various BlockingIOError issues |
| class C(str): |
| pass |
| c = C("") |
| b = self.BlockingIOError(1, c) |
| c.b = b |
| b.c = c |
| wr = weakref.ref(c) |
| del c, b |
| support.gc_collect() |
| self.assertTrue(wr() is None, wr) |
| |
| def test_abcs(self): |
| # Test the visible base classes are ABCs. |
| self.assertIsInstance(self.IOBase, abc.ABCMeta) |
| self.assertIsInstance(self.RawIOBase, abc.ABCMeta) |
| self.assertIsInstance(self.BufferedIOBase, abc.ABCMeta) |
| self.assertIsInstance(self.TextIOBase, abc.ABCMeta) |
| |
| def _check_abc_inheritance(self, abcmodule): |
| with self.open(support.TESTFN, "wb", buffering=0) as f: |
| self.assertIsInstance(f, abcmodule.IOBase) |
| self.assertIsInstance(f, abcmodule.RawIOBase) |
| self.assertNotIsInstance(f, abcmodule.BufferedIOBase) |
| self.assertNotIsInstance(f, abcmodule.TextIOBase) |
| with self.open(support.TESTFN, "wb") as f: |
| self.assertIsInstance(f, abcmodule.IOBase) |
| self.assertNotIsInstance(f, abcmodule.RawIOBase) |
| self.assertIsInstance(f, abcmodule.BufferedIOBase) |
| self.assertNotIsInstance(f, abcmodule.TextIOBase) |
| with self.open(support.TESTFN, "w") as f: |
| self.assertIsInstance(f, abcmodule.IOBase) |
| self.assertNotIsInstance(f, abcmodule.RawIOBase) |
| self.assertNotIsInstance(f, abcmodule.BufferedIOBase) |
| self.assertIsInstance(f, abcmodule.TextIOBase) |
| |
| def test_abc_inheritance(self): |
| # Test implementations inherit from their respective ABCs |
| self._check_abc_inheritance(self) |
| |
| def test_abc_inheritance_official(self): |
| # Test implementations inherit from the official ABCs of the |
| # baseline "io" module. |
| self._check_abc_inheritance(io) |
| |
| def _check_warn_on_dealloc(self, *args, **kwargs): |
| f = open(*args, **kwargs) |
| r = repr(f) |
| with self.assertWarns(ResourceWarning) as cm: |
| f = None |
| support.gc_collect() |
| self.assertIn(r, str(cm.warning.args[0])) |
| |
| def test_warn_on_dealloc(self): |
| self._check_warn_on_dealloc(support.TESTFN, "wb", buffering=0) |
| self._check_warn_on_dealloc(support.TESTFN, "wb") |
| self._check_warn_on_dealloc(support.TESTFN, "w") |
| |
| def _check_warn_on_dealloc_fd(self, *args, **kwargs): |
| fds = [] |
| def cleanup_fds(): |
| for fd in fds: |
| try: |
| os.close(fd) |
| except EnvironmentError as e: |
| if e.errno != errno.EBADF: |
| raise |
| self.addCleanup(cleanup_fds) |
| r, w = os.pipe() |
| fds += r, w |
| self._check_warn_on_dealloc(r, *args, **kwargs) |
| # When using closefd=False, there's no warning |
| r, w = os.pipe() |
| fds += r, w |
| with warnings.catch_warnings(record=True) as recorded: |
| open(r, *args, closefd=False, **kwargs) |
| support.gc_collect() |
| self.assertEqual(recorded, []) |
| |
| def test_warn_on_dealloc_fd(self): |
| self._check_warn_on_dealloc_fd("rb", buffering=0) |
| self._check_warn_on_dealloc_fd("rb") |
| self._check_warn_on_dealloc_fd("r") |
| |
| |
| def test_pickling(self): |
| # Pickling file objects is forbidden |
| for kwargs in [ |
| {"mode": "w"}, |
| {"mode": "wb"}, |
| {"mode": "wb", "buffering": 0}, |
| {"mode": "r"}, |
| {"mode": "rb"}, |
| {"mode": "rb", "buffering": 0}, |
| {"mode": "w+"}, |
| {"mode": "w+b"}, |
| {"mode": "w+b", "buffering": 0}, |
| ]: |
| for protocol in range(pickle.HIGHEST_PROTOCOL + 1): |
| with self.open(support.TESTFN, **kwargs) as f: |
| self.assertRaises(TypeError, pickle.dumps, f, protocol) |
| |
| @unittest.skipUnless(fcntl, 'fcntl required for this test') |
| def test_nonblock_pipe_write_bigbuf(self): |
| self._test_nonblock_pipe_write(16*1024) |
| |
| @unittest.skipUnless(fcntl, 'fcntl required for this test') |
| def test_nonblock_pipe_write_smallbuf(self): |
| self._test_nonblock_pipe_write(1024) |
| |
| def _set_non_blocking(self, fd): |
| flags = fcntl.fcntl(fd, fcntl.F_GETFL) |
| self.assertNotEqual(flags, -1) |
| res = fcntl.fcntl(fd, fcntl.F_SETFL, flags | os.O_NONBLOCK) |
| self.assertEqual(res, 0) |
| |
| def _test_nonblock_pipe_write(self, bufsize): |
| sent = [] |
| received = [] |
| r, w = os.pipe() |
| self._set_non_blocking(r) |
| self._set_non_blocking(w) |
| |
| # To exercise all code paths in the C implementation we need |
| # to play with buffer sizes. For instance, if we choose a |
| # buffer size less than or equal to _PIPE_BUF (4096 on Linux) |
| # then we will never get a partial write of the buffer. |
| rf = self.open(r, mode='rb', closefd=True, buffering=bufsize) |
| wf = self.open(w, mode='wb', closefd=True, buffering=bufsize) |
| |
| with rf, wf: |
| for N in 9999, 73, 7574: |
| try: |
| i = 0 |
| while True: |
| msg = bytes([i % 26 + 97]) * N |
| sent.append(msg) |
| wf.write(msg) |
| i += 1 |
| |
| except self.BlockingIOError as e: |
| self.assertEqual(e.args[0], errno.EAGAIN) |
| self.assertEqual(e.args[2], e.characters_written) |
| sent[-1] = sent[-1][:e.characters_written] |
| received.append(rf.read()) |
| msg = b'BLOCKED' |
| wf.write(msg) |
| sent.append(msg) |
| |
| while True: |
| try: |
| wf.flush() |
| break |
| except self.BlockingIOError as e: |
| self.assertEqual(e.args[0], errno.EAGAIN) |
| self.assertEqual(e.args[2], e.characters_written) |
| self.assertEqual(e.characters_written, 0) |
| received.append(rf.read()) |
| |
| received += iter(rf.read, None) |
| |
| sent, received = b''.join(sent), b''.join(received) |
| self.assertTrue(sent == received) |
| self.assertTrue(wf.closed) |
| self.assertTrue(rf.closed) |
| |
| def test_create_fail(self): |
| # 'x' mode fails if file is existing |
| with self.open(support.TESTFN, 'w'): |
| pass |
| self.assertRaises(FileExistsError, self.open, support.TESTFN, 'x') |
| |
| def test_create_writes(self): |
| # 'x' mode opens for writing |
| with self.open(support.TESTFN, 'xb') as f: |
| f.write(b"spam") |
| with self.open(support.TESTFN, 'rb') as f: |
| self.assertEqual(b"spam", f.read()) |
| |
| def test_open_allargs(self): |
| # there used to be a buffer overflow in the parser for rawmode |
| self.assertRaises(ValueError, self.open, support.TESTFN, 'rwax+') |
| |
| |
| class CMiscIOTest(MiscIOTest): |
| io = io |
| |
| def test_readinto_buffer_overflow(self): |
| # Issue #18025 |
| class BadReader(self.io.BufferedIOBase): |
| def read(self, n=-1): |
| return b'x' * 10**6 |
| bufio = BadReader() |
| b = bytearray(2) |
| self.assertRaises(ValueError, bufio.readinto, b) |
| |
| class PyMiscIOTest(MiscIOTest): |
| io = pyio |
| |
| |
| @unittest.skipIf(os.name == 'nt', 'POSIX signals required for this test.') |
| class SignalsTest(unittest.TestCase): |
| |
| def setUp(self): |
| self.oldalrm = signal.signal(signal.SIGALRM, self.alarm_interrupt) |
| |
| def tearDown(self): |
| signal.signal(signal.SIGALRM, self.oldalrm) |
| |
| def alarm_interrupt(self, sig, frame): |
| 1/0 |
| |
| @unittest.skipUnless(threading, 'Threading required for this test.') |
| def check_interrupted_write(self, item, bytes, **fdopen_kwargs): |
| """Check that a partial write, when it gets interrupted, properly |
| invokes the signal handler, and bubbles up the exception raised |
| in the latter.""" |
| read_results = [] |
| def _read(): |
| if hasattr(signal, 'pthread_sigmask'): |
| signal.pthread_sigmask(signal.SIG_BLOCK, [signal.SIGALRM]) |
| s = os.read(r, 1) |
| read_results.append(s) |
| t = threading.Thread(target=_read) |
| t.daemon = True |
| r, w = os.pipe() |
| fdopen_kwargs["closefd"] = False |
| try: |
| wio = self.io.open(w, **fdopen_kwargs) |
| t.start() |
| signal.alarm(1) |
| # Fill the pipe enough that the write will be blocking. |
| # It will be interrupted by the timer armed above. Since the |
| # other thread has read one byte, the low-level write will |
| # return with a successful (partial) result rather than an EINTR. |
| # The buffered IO layer must check for pending signal |
| # handlers, which in this case will invoke alarm_interrupt(). |
| self.assertRaises(ZeroDivisionError, |
| wio.write, item * (support.PIPE_MAX_SIZE // len(item) + 1)) |
| t.join() |
| # We got one byte, get another one and check that it isn't a |
| # repeat of the first one. |
| read_results.append(os.read(r, 1)) |
| self.assertEqual(read_results, [bytes[0:1], bytes[1:2]]) |
| finally: |
| os.close(w) |
| os.close(r) |
| # This is deliberate. If we didn't close the file descriptor |
| # before closing wio, wio would try to flush its internal |
| # buffer, and block again. |
| try: |
| wio.close() |
| except IOError as e: |
| if e.errno != errno.EBADF: |
| raise |
| |
| def test_interrupted_write_unbuffered(self): |
| self.check_interrupted_write(b"xy", b"xy", mode="wb", buffering=0) |
| |
| def test_interrupted_write_buffered(self): |
| self.check_interrupted_write(b"xy", b"xy", mode="wb") |
| |
| def test_interrupted_write_text(self): |
| self.check_interrupted_write("xy", b"xy", mode="w", encoding="ascii") |
| |
| @support.no_tracing |
| def check_reentrant_write(self, data, **fdopen_kwargs): |
| def on_alarm(*args): |
| # Will be called reentrantly from the same thread |
| wio.write(data) |
| 1/0 |
| signal.signal(signal.SIGALRM, on_alarm) |
| r, w = os.pipe() |
| wio = self.io.open(w, **fdopen_kwargs) |
| try: |
| signal.alarm(1) |
| # Either the reentrant call to wio.write() fails with RuntimeError, |
| # or the signal handler raises ZeroDivisionError. |
| with self.assertRaises((ZeroDivisionError, RuntimeError)) as cm: |
| while 1: |
| for i in range(100): |
| wio.write(data) |
| wio.flush() |
| # Make sure the buffer doesn't fill up and block further writes |
| os.read(r, len(data) * 100) |
| exc = cm.exception |
| if isinstance(exc, RuntimeError): |
| self.assertTrue(str(exc).startswith("reentrant call"), str(exc)) |
| finally: |
| wio.close() |
| os.close(r) |
| |
| def test_reentrant_write_buffered(self): |
| self.check_reentrant_write(b"xy", mode="wb") |
| |
| def test_reentrant_write_text(self): |
| self.check_reentrant_write("xy", mode="w", encoding="ascii") |
| |
| def check_interrupted_read_retry(self, decode, **fdopen_kwargs): |
| """Check that a buffered read, when it gets interrupted (either |
| returning a partial result or EINTR), properly invokes the signal |
| handler and retries if the latter returned successfully.""" |
| r, w = os.pipe() |
| fdopen_kwargs["closefd"] = False |
| def alarm_handler(sig, frame): |
| os.write(w, b"bar") |
| signal.signal(signal.SIGALRM, alarm_handler) |
| try: |
| rio = self.io.open(r, **fdopen_kwargs) |
| os.write(w, b"foo") |
| signal.alarm(1) |
| # Expected behaviour: |
| # - first raw read() returns partial b"foo" |
| # - second raw read() returns EINTR |
| # - third raw read() returns b"bar" |
| self.assertEqual(decode(rio.read(6)), "foobar") |
| finally: |
| rio.close() |
| os.close(w) |
| os.close(r) |
| |
| def test_interrupted_read_retry_buffered(self): |
| self.check_interrupted_read_retry(lambda x: x.decode('latin1'), |
| mode="rb") |
| |
| def test_interrupted_read_retry_text(self): |
| self.check_interrupted_read_retry(lambda x: x, |
| mode="r") |
| |
| @unittest.skipUnless(threading, 'Threading required for this test.') |
| def check_interrupted_write_retry(self, item, **fdopen_kwargs): |
| """Check that a buffered write, when it gets interrupted (either |
| returning a partial result or EINTR), properly invokes the signal |
| handler and retries if the latter returned successfully.""" |
| select = support.import_module("select") |
| # A quantity that exceeds the buffer size of an anonymous pipe's |
| # write end. |
| N = support.PIPE_MAX_SIZE |
| r, w = os.pipe() |
| fdopen_kwargs["closefd"] = False |
| # We need a separate thread to read from the pipe and allow the |
| # write() to finish. This thread is started after the SIGALRM is |
| # received (forcing a first EINTR in write()). |
| read_results = [] |
| write_finished = False |
| def _read(): |
| while not write_finished: |
| while r in select.select([r], [], [], 1.0)[0]: |
| s = os.read(r, 1024) |
| read_results.append(s) |
| t = threading.Thread(target=_read) |
| t.daemon = True |
| def alarm1(sig, frame): |
| signal.signal(signal.SIGALRM, alarm2) |
| signal.alarm(1) |
| def alarm2(sig, frame): |
| t.start() |
| signal.signal(signal.SIGALRM, alarm1) |
| try: |
| wio = self.io.open(w, **fdopen_kwargs) |
| signal.alarm(1) |
| # Expected behaviour: |
| # - first raw write() is partial (because of the limited pipe buffer |
| # and the first alarm) |
| # - second raw write() returns EINTR (because of the second alarm) |
| # - subsequent write()s are successful (either partial or complete) |
| self.assertEqual(N, wio.write(item * N)) |
| wio.flush() |
| write_finished = True |
| t.join() |
| self.assertEqual(N, sum(len(x) for x in read_results)) |
| finally: |
| write_finished = True |
| os.close(w) |
| os.close(r) |
| # This is deliberate. If we didn't close the file descriptor |
| # before closing wio, wio would try to flush its internal |
| # buffer, and could block (in case of failure). |
| try: |
| wio.close() |
| except IOError as e: |
| if e.errno != errno.EBADF: |
| raise |
| |
| def test_interrupted_write_retry_buffered(self): |
| self.check_interrupted_write_retry(b"x", mode="wb") |
| |
| def test_interrupted_write_retry_text(self): |
| self.check_interrupted_write_retry("x", mode="w", encoding="latin1") |
| |
| |
| class CSignalsTest(SignalsTest): |
| io = io |
| |
| class PySignalsTest(SignalsTest): |
| io = pyio |
| |
| # Handling reentrancy issues would slow down _pyio even more, so the |
| # tests are disabled. |
| test_reentrant_write_buffered = None |
| test_reentrant_write_text = None |
| |
| |
| def load_tests(*args): |
| tests = (CIOTest, PyIOTest, |
| CBufferedReaderTest, PyBufferedReaderTest, |
| CBufferedWriterTest, PyBufferedWriterTest, |
| CBufferedRWPairTest, PyBufferedRWPairTest, |
| CBufferedRandomTest, PyBufferedRandomTest, |
| StatefulIncrementalDecoderTest, |
| CIncrementalNewlineDecoderTest, PyIncrementalNewlineDecoderTest, |
| CTextIOWrapperTest, PyTextIOWrapperTest, |
| CMiscIOTest, PyMiscIOTest, |
| CSignalsTest, PySignalsTest, |
| ) |
| |
| # Put the namespaces of the IO module we are testing and some useful mock |
| # classes in the __dict__ of each test. |
| mocks = (MockRawIO, MisbehavedRawIO, MockFileIO, CloseFailureIO, |
| MockNonBlockWriterIO, MockUnseekableIO, MockRawIOWithoutRead) |
| all_members = io.__all__ + ["IncrementalNewlineDecoder"] |
| c_io_ns = {name : getattr(io, name) for name in all_members} |
| py_io_ns = {name : getattr(pyio, name) for name in all_members} |
| globs = globals() |
| c_io_ns.update((x.__name__, globs["C" + x.__name__]) for x in mocks) |
| py_io_ns.update((x.__name__, globs["Py" + x.__name__]) for x in mocks) |
| # Avoid turning open into a bound method. |
| py_io_ns["open"] = pyio.OpenWrapper |
| for test in tests: |
| if test.__name__.startswith("C"): |
| for name, obj in c_io_ns.items(): |
| setattr(test, name, obj) |
| elif test.__name__.startswith("Py"): |
| for name, obj in py_io_ns.items(): |
| setattr(test, name, obj) |
| |
| suite = unittest.TestSuite([unittest.makeSuite(test) for test in tests]) |
| return suite |
| |
| if __name__ == "__main__": |
| unittest.main() |