Antoine Pitrou | 37dc5f8 | 2011-04-03 17:05:46 +0200 | [diff] [blame^] | 1 | /* _bz2 - Low-level Python interface to libbzip2. */ |
| 2 | |
| 3 | #define PY_SSIZE_T_CLEAN |
| 4 | |
| 5 | #include "Python.h" |
| 6 | #include "structmember.h" |
| 7 | |
| 8 | #ifdef WITH_THREAD |
| 9 | #include "pythread.h" |
| 10 | #endif |
| 11 | |
| 12 | #include <bzlib.h> |
| 13 | #include <stdio.h> |
| 14 | |
| 15 | |
| 16 | #ifndef BZ_CONFIG_ERROR |
| 17 | #define BZ2_bzCompress bzCompress |
| 18 | #define BZ2_bzCompressInit bzCompressInit |
| 19 | #define BZ2_bzCompressEnd bzCompressEnd |
| 20 | #define BZ2_bzDecompress bzDecompress |
| 21 | #define BZ2_bzDecompressInit bzDecompressInit |
| 22 | #define BZ2_bzDecompressEnd bzDecompressEnd |
| 23 | #endif /* ! BZ_CONFIG_ERROR */ |
| 24 | |
| 25 | |
| 26 | #ifdef WITH_THREAD |
| 27 | #define ACQUIRE_LOCK(obj) do { \ |
| 28 | if (!PyThread_acquire_lock((obj)->lock, 0)) { \ |
| 29 | Py_BEGIN_ALLOW_THREADS \ |
| 30 | PyThread_acquire_lock((obj)->lock, 1); \ |
| 31 | Py_END_ALLOW_THREADS \ |
| 32 | } } while (0) |
| 33 | #define RELEASE_LOCK(obj) PyThread_release_lock((obj)->lock) |
| 34 | #else |
| 35 | #define ACQUIRE_LOCK(obj) |
| 36 | #define RELEASE_LOCK(obj) |
| 37 | #endif |
| 38 | |
| 39 | |
| 40 | typedef struct { |
| 41 | PyObject_HEAD |
| 42 | bz_stream bzs; |
| 43 | int flushed; |
| 44 | #ifdef WITH_THREAD |
| 45 | PyThread_type_lock lock; |
| 46 | #endif |
| 47 | } BZ2Compressor; |
| 48 | |
| 49 | typedef struct { |
| 50 | PyObject_HEAD |
| 51 | bz_stream bzs; |
| 52 | char eof; /* T_BOOL expects a char */ |
| 53 | PyObject *unused_data; |
| 54 | #ifdef WITH_THREAD |
| 55 | PyThread_type_lock lock; |
| 56 | #endif |
| 57 | } BZ2Decompressor; |
| 58 | |
| 59 | |
| 60 | /* Helper functions. */ |
| 61 | |
| 62 | static int |
| 63 | catch_bz2_error(int bzerror) |
| 64 | { |
| 65 | switch(bzerror) { |
| 66 | case BZ_OK: |
| 67 | case BZ_RUN_OK: |
| 68 | case BZ_FLUSH_OK: |
| 69 | case BZ_FINISH_OK: |
| 70 | case BZ_STREAM_END: |
| 71 | return 0; |
| 72 | |
| 73 | #ifdef BZ_CONFIG_ERROR |
| 74 | case BZ_CONFIG_ERROR: |
| 75 | PyErr_SetString(PyExc_SystemError, |
| 76 | "libbzip2 was not compiled correctly"); |
| 77 | return 1; |
| 78 | #endif |
| 79 | case BZ_PARAM_ERROR: |
| 80 | PyErr_SetString(PyExc_ValueError, |
| 81 | "Internal error - " |
| 82 | "invalid parameters passed to libbzip2"); |
| 83 | return 1; |
| 84 | case BZ_MEM_ERROR: |
| 85 | PyErr_NoMemory(); |
| 86 | return 1; |
| 87 | case BZ_DATA_ERROR: |
| 88 | case BZ_DATA_ERROR_MAGIC: |
| 89 | PyErr_SetString(PyExc_IOError, "Invalid data stream"); |
| 90 | return 1; |
| 91 | case BZ_IO_ERROR: |
| 92 | PyErr_SetString(PyExc_IOError, "Unknown I/O error"); |
| 93 | return 1; |
| 94 | case BZ_UNEXPECTED_EOF: |
| 95 | PyErr_SetString(PyExc_EOFError, |
| 96 | "Compressed file ended before the logical " |
| 97 | "end-of-stream was detected"); |
| 98 | return 1; |
| 99 | case BZ_SEQUENCE_ERROR: |
| 100 | PyErr_SetString(PyExc_RuntimeError, |
| 101 | "Internal error - " |
| 102 | "Invalid sequence of commands sent to libbzip2"); |
| 103 | return 1; |
| 104 | default: |
| 105 | PyErr_Format(PyExc_IOError, |
| 106 | "Unrecognized error from libbzip2: %d", bzerror); |
| 107 | return 1; |
| 108 | } |
| 109 | } |
| 110 | |
| 111 | #if BUFSIZ < 8192 |
| 112 | #define SMALLCHUNK 8192 |
| 113 | #else |
| 114 | #define SMALLCHUNK BUFSIZ |
| 115 | #endif |
| 116 | |
| 117 | #if SIZEOF_INT < 4 |
| 118 | #define BIGCHUNK (512 * 32) |
| 119 | #else |
| 120 | #define BIGCHUNK (512 * 1024) |
| 121 | #endif |
| 122 | |
| 123 | static int |
| 124 | grow_buffer(PyObject **buf) |
| 125 | { |
| 126 | size_t size = PyBytes_GET_SIZE(*buf); |
| 127 | if (size <= SMALLCHUNK) |
| 128 | return _PyBytes_Resize(buf, size + SMALLCHUNK); |
| 129 | else if (size <= BIGCHUNK) |
| 130 | return _PyBytes_Resize(buf, size * 2); |
| 131 | else |
| 132 | return _PyBytes_Resize(buf, size + BIGCHUNK); |
| 133 | } |
| 134 | |
| 135 | |
| 136 | /* BZ2Compressor class. */ |
| 137 | |
| 138 | static PyObject * |
| 139 | compress(BZ2Compressor *c, char *data, size_t len, int action) |
| 140 | { |
| 141 | size_t data_size = 0; |
| 142 | PyObject *result; |
| 143 | |
| 144 | result = PyBytes_FromStringAndSize(NULL, SMALLCHUNK); |
| 145 | if (result == NULL) |
| 146 | return NULL; |
| 147 | c->bzs.next_in = data; |
| 148 | /* FIXME This is not 64-bit clean - avail_in is an int. */ |
| 149 | c->bzs.avail_in = len; |
| 150 | c->bzs.next_out = PyBytes_AS_STRING(result); |
| 151 | c->bzs.avail_out = PyBytes_GET_SIZE(result); |
| 152 | for (;;) { |
| 153 | char *this_out; |
| 154 | int bzerror; |
| 155 | |
| 156 | Py_BEGIN_ALLOW_THREADS |
| 157 | this_out = c->bzs.next_out; |
| 158 | bzerror = BZ2_bzCompress(&c->bzs, action); |
| 159 | data_size += c->bzs.next_out - this_out; |
| 160 | Py_END_ALLOW_THREADS |
| 161 | if (catch_bz2_error(bzerror)) |
| 162 | goto error; |
| 163 | |
| 164 | /* In regular compression mode, stop when input data is exhausted. |
| 165 | In flushing mode, stop when all buffered data has been flushed. */ |
| 166 | if ((action == BZ_RUN && c->bzs.avail_in == 0) || |
| 167 | (action == BZ_FINISH && bzerror == BZ_STREAM_END)) |
| 168 | break; |
| 169 | |
| 170 | if (c->bzs.avail_out == 0) { |
| 171 | if (grow_buffer(&result) < 0) |
| 172 | goto error; |
| 173 | c->bzs.next_out = PyBytes_AS_STRING(result) + data_size; |
| 174 | c->bzs.avail_out = PyBytes_GET_SIZE(result) - data_size; |
| 175 | } |
| 176 | } |
| 177 | if (data_size != PyBytes_GET_SIZE(result)) |
| 178 | if (_PyBytes_Resize(&result, data_size) < 0) |
| 179 | goto error; |
| 180 | return result; |
| 181 | |
| 182 | error: |
| 183 | Py_XDECREF(result); |
| 184 | return NULL; |
| 185 | } |
| 186 | |
| 187 | PyDoc_STRVAR(BZ2Compressor_compress__doc__, |
| 188 | "compress(data) -> bytes\n" |
| 189 | "\n" |
| 190 | "Provide data to the compressor object. Returns a chunk of\n" |
| 191 | "compressed data if possible, or b'' otherwise.\n" |
| 192 | "\n" |
| 193 | "When you have finished providing data to the compressor, call the\n" |
| 194 | "flush() method to finish the compression process.\n"); |
| 195 | |
| 196 | static PyObject * |
| 197 | BZ2Compressor_compress(BZ2Compressor *self, PyObject *args) |
| 198 | { |
| 199 | Py_buffer buffer; |
| 200 | PyObject *result = NULL; |
| 201 | |
| 202 | if (!PyArg_ParseTuple(args, "y*:compress", &buffer)) |
| 203 | return NULL; |
| 204 | |
| 205 | ACQUIRE_LOCK(self); |
| 206 | if (self->flushed) |
| 207 | PyErr_SetString(PyExc_ValueError, "Compressor has been flushed"); |
| 208 | else |
| 209 | result = compress(self, buffer.buf, buffer.len, BZ_RUN); |
| 210 | RELEASE_LOCK(self); |
| 211 | PyBuffer_Release(&buffer); |
| 212 | return result; |
| 213 | } |
| 214 | |
| 215 | PyDoc_STRVAR(BZ2Compressor_flush__doc__, |
| 216 | "flush() -> bytes\n" |
| 217 | "\n" |
| 218 | "Finish the compression process. Returns the compressed data left\n" |
| 219 | "in internal buffers.\n" |
| 220 | "\n" |
| 221 | "The compressor object may not be used after this method is called.\n"); |
| 222 | |
| 223 | static PyObject * |
| 224 | BZ2Compressor_flush(BZ2Compressor *self, PyObject *noargs) |
| 225 | { |
| 226 | PyObject *result = NULL; |
| 227 | |
| 228 | ACQUIRE_LOCK(self); |
| 229 | if (self->flushed) |
| 230 | PyErr_SetString(PyExc_ValueError, "Repeated call to flush()"); |
| 231 | else { |
| 232 | self->flushed = 1; |
| 233 | result = compress(self, NULL, 0, BZ_FINISH); |
| 234 | } |
| 235 | RELEASE_LOCK(self); |
| 236 | return result; |
| 237 | } |
| 238 | |
| 239 | static int |
| 240 | BZ2Compressor_init(BZ2Compressor *self, PyObject *args, PyObject *kwargs) |
| 241 | { |
| 242 | int compresslevel = 9; |
| 243 | int bzerror; |
| 244 | |
| 245 | if (!PyArg_ParseTuple(args, "|i:BZ2Compressor", &compresslevel)) |
| 246 | return -1; |
| 247 | if (!(1 <= compresslevel && compresslevel <= 9)) { |
| 248 | PyErr_SetString(PyExc_ValueError, |
| 249 | "compresslevel must be between 1 and 9"); |
| 250 | return -1; |
| 251 | } |
| 252 | |
| 253 | #ifdef WITH_THREAD |
| 254 | self->lock = PyThread_allocate_lock(); |
| 255 | if (self->lock == NULL) { |
| 256 | PyErr_SetString(PyExc_MemoryError, "Unable to allocate lock"); |
| 257 | return -1; |
| 258 | } |
| 259 | #endif |
| 260 | |
| 261 | bzerror = BZ2_bzCompressInit(&self->bzs, compresslevel, 0, 0); |
| 262 | if (catch_bz2_error(bzerror)) |
| 263 | goto error; |
| 264 | |
| 265 | return 0; |
| 266 | |
| 267 | error: |
| 268 | #ifdef WITH_THREAD |
| 269 | PyThread_free_lock(self->lock); |
| 270 | self->lock = NULL; |
| 271 | #endif |
| 272 | return -1; |
| 273 | } |
| 274 | |
| 275 | static void |
| 276 | BZ2Compressor_dealloc(BZ2Compressor *self) |
| 277 | { |
| 278 | BZ2_bzCompressEnd(&self->bzs); |
| 279 | #ifdef WITH_THREAD |
| 280 | if (self->lock != NULL) |
| 281 | PyThread_free_lock(self->lock); |
| 282 | #endif |
| 283 | Py_TYPE(self)->tp_free((PyObject *)self); |
| 284 | } |
| 285 | |
| 286 | static PyMethodDef BZ2Compressor_methods[] = { |
| 287 | {"compress", (PyCFunction)BZ2Compressor_compress, METH_VARARGS, |
| 288 | BZ2Compressor_compress__doc__}, |
| 289 | {"flush", (PyCFunction)BZ2Compressor_flush, METH_NOARGS, |
| 290 | BZ2Compressor_flush__doc__}, |
| 291 | {NULL} |
| 292 | }; |
| 293 | |
| 294 | PyDoc_STRVAR(BZ2Compressor__doc__, |
| 295 | "BZ2Compressor(compresslevel=9)\n" |
| 296 | "\n" |
| 297 | "Create a compressor object for compressing data incrementally.\n" |
| 298 | "\n" |
| 299 | "compresslevel, if given, must be a number between 1 and 9.\n" |
| 300 | "\n" |
| 301 | "For one-shot compression, use the compress() function instead.\n"); |
| 302 | |
| 303 | static PyTypeObject BZ2Compressor_Type = { |
| 304 | PyVarObject_HEAD_INIT(NULL, 0) |
| 305 | "_bz2.BZ2Compressor", /* tp_name */ |
| 306 | sizeof(BZ2Compressor), /* tp_basicsize */ |
| 307 | 0, /* tp_itemsize */ |
| 308 | (destructor)BZ2Compressor_dealloc, /* tp_dealloc */ |
| 309 | 0, /* tp_print */ |
| 310 | 0, /* tp_getattr */ |
| 311 | 0, /* tp_setattr */ |
| 312 | 0, /* tp_reserved */ |
| 313 | 0, /* tp_repr */ |
| 314 | 0, /* tp_as_number */ |
| 315 | 0, /* tp_as_sequence */ |
| 316 | 0, /* tp_as_mapping */ |
| 317 | 0, /* tp_hash */ |
| 318 | 0, /* tp_call */ |
| 319 | 0, /* tp_str */ |
| 320 | 0, /* tp_getattro */ |
| 321 | 0, /* tp_setattro */ |
| 322 | 0, /* tp_as_buffer */ |
| 323 | Py_TPFLAGS_DEFAULT, /* tp_flags */ |
| 324 | BZ2Compressor__doc__, /* tp_doc */ |
| 325 | 0, /* tp_traverse */ |
| 326 | 0, /* tp_clear */ |
| 327 | 0, /* tp_richcompare */ |
| 328 | 0, /* tp_weaklistoffset */ |
| 329 | 0, /* tp_iter */ |
| 330 | 0, /* tp_iternext */ |
| 331 | BZ2Compressor_methods, /* tp_methods */ |
| 332 | 0, /* tp_members */ |
| 333 | 0, /* tp_getset */ |
| 334 | 0, /* tp_base */ |
| 335 | 0, /* tp_dict */ |
| 336 | 0, /* tp_descr_get */ |
| 337 | 0, /* tp_descr_set */ |
| 338 | 0, /* tp_dictoffset */ |
| 339 | (initproc)BZ2Compressor_init, /* tp_init */ |
| 340 | 0, /* tp_alloc */ |
| 341 | PyType_GenericNew, /* tp_new */ |
| 342 | }; |
| 343 | |
| 344 | |
| 345 | /* BZ2Decompressor class. */ |
| 346 | |
| 347 | static PyObject * |
| 348 | decompress(BZ2Decompressor *d, char *data, size_t len) |
| 349 | { |
| 350 | size_t data_size = 0; |
| 351 | PyObject *result; |
| 352 | |
| 353 | result = PyBytes_FromStringAndSize(NULL, SMALLCHUNK); |
| 354 | if (result == NULL) |
| 355 | return result; |
| 356 | d->bzs.next_in = data; |
| 357 | /* FIXME This is not 64-bit clean - avail_in is an int. */ |
| 358 | d->bzs.avail_in = len; |
| 359 | d->bzs.next_out = PyBytes_AS_STRING(result); |
| 360 | d->bzs.avail_out = PyBytes_GET_SIZE(result); |
| 361 | for (;;) { |
| 362 | char *this_out; |
| 363 | int bzerror; |
| 364 | |
| 365 | Py_BEGIN_ALLOW_THREADS |
| 366 | this_out = d->bzs.next_out; |
| 367 | bzerror = BZ2_bzDecompress(&d->bzs); |
| 368 | data_size += d->bzs.next_out - this_out; |
| 369 | Py_END_ALLOW_THREADS |
| 370 | if (catch_bz2_error(bzerror)) |
| 371 | goto error; |
| 372 | if (bzerror == BZ_STREAM_END) { |
| 373 | d->eof = 1; |
| 374 | if (d->bzs.avail_in > 0) { /* Save leftover input to unused_data */ |
| 375 | Py_CLEAR(d->unused_data); |
| 376 | d->unused_data = PyBytes_FromStringAndSize(d->bzs.next_in, |
| 377 | d->bzs.avail_in); |
| 378 | if (d->unused_data == NULL) |
| 379 | goto error; |
| 380 | } |
| 381 | break; |
| 382 | } |
| 383 | if (d->bzs.avail_in == 0) |
| 384 | break; |
| 385 | if (d->bzs.avail_out == 0) { |
| 386 | if (grow_buffer(&result) < 0) |
| 387 | goto error; |
| 388 | d->bzs.next_out = PyBytes_AS_STRING(result) + data_size; |
| 389 | d->bzs.avail_out = PyBytes_GET_SIZE(result) - data_size; |
| 390 | } |
| 391 | } |
| 392 | if (data_size != PyBytes_GET_SIZE(result)) |
| 393 | if (_PyBytes_Resize(&result, data_size) < 0) |
| 394 | goto error; |
| 395 | return result; |
| 396 | |
| 397 | error: |
| 398 | Py_XDECREF(result); |
| 399 | return NULL; |
| 400 | } |
| 401 | |
| 402 | PyDoc_STRVAR(BZ2Decompressor_decompress__doc__, |
| 403 | "decompress(data) -> bytes\n" |
| 404 | "\n" |
| 405 | "Provide data to the decompressor object. Returns a chunk of\n" |
| 406 | "decompressed data if possible, or b'' otherwise.\n" |
| 407 | "\n" |
| 408 | "Attempting to decompress data after the end of stream is reached\n" |
| 409 | "raises an EOFError. Any data found after the end of the stream\n" |
| 410 | "is ignored and saved in the unused_data attribute.\n"); |
| 411 | |
| 412 | static PyObject * |
| 413 | BZ2Decompressor_decompress(BZ2Decompressor *self, PyObject *args) |
| 414 | { |
| 415 | Py_buffer buffer; |
| 416 | PyObject *result = NULL; |
| 417 | |
| 418 | if (!PyArg_ParseTuple(args, "y*:decompress", &buffer)) |
| 419 | return NULL; |
| 420 | |
| 421 | ACQUIRE_LOCK(self); |
| 422 | if (self->eof) |
| 423 | PyErr_SetString(PyExc_EOFError, "End of stream already reached"); |
| 424 | else |
| 425 | result = decompress(self, buffer.buf, buffer.len); |
| 426 | RELEASE_LOCK(self); |
| 427 | PyBuffer_Release(&buffer); |
| 428 | return result; |
| 429 | } |
| 430 | |
| 431 | static int |
| 432 | BZ2Decompressor_init(BZ2Decompressor *self, PyObject *args, PyObject *kwargs) |
| 433 | { |
| 434 | int bzerror; |
| 435 | |
| 436 | if (!PyArg_ParseTuple(args, ":BZ2Decompressor")) |
| 437 | return -1; |
| 438 | |
| 439 | #ifdef WITH_THREAD |
| 440 | self->lock = PyThread_allocate_lock(); |
| 441 | if (self->lock == NULL) { |
| 442 | PyErr_SetString(PyExc_MemoryError, "Unable to allocate lock"); |
| 443 | return -1; |
| 444 | } |
| 445 | #endif |
| 446 | |
| 447 | self->unused_data = PyBytes_FromStringAndSize("", 0); |
| 448 | if (self->unused_data == NULL) |
| 449 | goto error; |
| 450 | |
| 451 | bzerror = BZ2_bzDecompressInit(&self->bzs, 0, 0); |
| 452 | if (catch_bz2_error(bzerror)) |
| 453 | goto error; |
| 454 | |
| 455 | return 0; |
| 456 | |
| 457 | error: |
| 458 | Py_CLEAR(self->unused_data); |
| 459 | #ifdef WITH_THREAD |
| 460 | PyThread_free_lock(self->lock); |
| 461 | self->lock = NULL; |
| 462 | #endif |
| 463 | return -1; |
| 464 | } |
| 465 | |
| 466 | static void |
| 467 | BZ2Decompressor_dealloc(BZ2Decompressor *self) |
| 468 | { |
| 469 | BZ2_bzDecompressEnd(&self->bzs); |
| 470 | Py_CLEAR(self->unused_data); |
| 471 | #ifdef WITH_THREAD |
| 472 | if (self->lock != NULL) |
| 473 | PyThread_free_lock(self->lock); |
| 474 | #endif |
| 475 | Py_TYPE(self)->tp_free((PyObject *)self); |
| 476 | } |
| 477 | |
| 478 | static PyMethodDef BZ2Decompressor_methods[] = { |
| 479 | {"decompress", (PyCFunction)BZ2Decompressor_decompress, METH_VARARGS, |
| 480 | BZ2Decompressor_decompress__doc__}, |
| 481 | {NULL} |
| 482 | }; |
| 483 | |
| 484 | PyDoc_STRVAR(BZ2Decompressor_eof__doc__, |
| 485 | "True if the end-of-stream marker has been reached."); |
| 486 | |
| 487 | PyDoc_STRVAR(BZ2Decompressor_unused_data__doc__, |
| 488 | "Data found after the end of the compressed stream."); |
| 489 | |
| 490 | static PyMemberDef BZ2Decompressor_members[] = { |
| 491 | {"eof", T_BOOL, offsetof(BZ2Decompressor, eof), |
| 492 | READONLY, BZ2Decompressor_eof__doc__}, |
| 493 | {"unused_data", T_OBJECT_EX, offsetof(BZ2Decompressor, unused_data), |
| 494 | READONLY, BZ2Decompressor_unused_data__doc__}, |
| 495 | {NULL} |
| 496 | }; |
| 497 | |
| 498 | PyDoc_STRVAR(BZ2Decompressor__doc__, |
| 499 | "BZ2Decompressor()\n" |
| 500 | "\n" |
| 501 | "Create a decompressor object for decompressing data incrementally.\n" |
| 502 | "\n" |
| 503 | "For one-shot decompression, use the decompress() function instead.\n"); |
| 504 | |
| 505 | static PyTypeObject BZ2Decompressor_Type = { |
| 506 | PyVarObject_HEAD_INIT(NULL, 0) |
| 507 | "_bz2.BZ2Decompressor", /* tp_name */ |
| 508 | sizeof(BZ2Decompressor), /* tp_basicsize */ |
| 509 | 0, /* tp_itemsize */ |
| 510 | (destructor)BZ2Decompressor_dealloc,/* tp_dealloc */ |
| 511 | 0, /* tp_print */ |
| 512 | 0, /* tp_getattr */ |
| 513 | 0, /* tp_setattr */ |
| 514 | 0, /* tp_reserved */ |
| 515 | 0, /* tp_repr */ |
| 516 | 0, /* tp_as_number */ |
| 517 | 0, /* tp_as_sequence */ |
| 518 | 0, /* tp_as_mapping */ |
| 519 | 0, /* tp_hash */ |
| 520 | 0, /* tp_call */ |
| 521 | 0, /* tp_str */ |
| 522 | 0, /* tp_getattro */ |
| 523 | 0, /* tp_setattro */ |
| 524 | 0, /* tp_as_buffer */ |
| 525 | Py_TPFLAGS_DEFAULT, /* tp_flags */ |
| 526 | BZ2Decompressor__doc__, /* tp_doc */ |
| 527 | 0, /* tp_traverse */ |
| 528 | 0, /* tp_clear */ |
| 529 | 0, /* tp_richcompare */ |
| 530 | 0, /* tp_weaklistoffset */ |
| 531 | 0, /* tp_iter */ |
| 532 | 0, /* tp_iternext */ |
| 533 | BZ2Decompressor_methods, /* tp_methods */ |
| 534 | BZ2Decompressor_members, /* tp_members */ |
| 535 | 0, /* tp_getset */ |
| 536 | 0, /* tp_base */ |
| 537 | 0, /* tp_dict */ |
| 538 | 0, /* tp_descr_get */ |
| 539 | 0, /* tp_descr_set */ |
| 540 | 0, /* tp_dictoffset */ |
| 541 | (initproc)BZ2Decompressor_init, /* tp_init */ |
| 542 | 0, /* tp_alloc */ |
| 543 | PyType_GenericNew, /* tp_new */ |
| 544 | }; |
| 545 | |
| 546 | |
| 547 | /* Module initialization. */ |
| 548 | |
| 549 | static struct PyModuleDef _bz2module = { |
| 550 | PyModuleDef_HEAD_INIT, |
| 551 | "_bz2", |
| 552 | NULL, |
| 553 | -1, |
| 554 | NULL, |
| 555 | NULL, |
| 556 | NULL, |
| 557 | NULL, |
| 558 | NULL |
| 559 | }; |
| 560 | |
| 561 | PyMODINIT_FUNC |
| 562 | PyInit__bz2(void) |
| 563 | { |
| 564 | PyObject *m; |
| 565 | |
| 566 | if (PyType_Ready(&BZ2Compressor_Type) < 0) |
| 567 | return NULL; |
| 568 | if (PyType_Ready(&BZ2Decompressor_Type) < 0) |
| 569 | return NULL; |
| 570 | |
| 571 | m = PyModule_Create(&_bz2module); |
| 572 | if (m == NULL) |
| 573 | return NULL; |
| 574 | |
| 575 | Py_INCREF(&BZ2Compressor_Type); |
| 576 | PyModule_AddObject(m, "BZ2Compressor", (PyObject *)&BZ2Compressor_Type); |
| 577 | |
| 578 | Py_INCREF(&BZ2Decompressor_Type); |
| 579 | PyModule_AddObject(m, "BZ2Decompressor", |
| 580 | (PyObject *)&BZ2Decompressor_Type); |
| 581 | |
| 582 | return m; |
| 583 | } |