Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 1 | /* Math module -- standard C math library functions, pi and e */ |
| 2 | |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 3 | /* Here are some comments from Tim Peters, extracted from the |
| 4 | discussion attached to http://bugs.python.org/issue1640. They |
| 5 | describe the general aims of the math module with respect to |
| 6 | special values, IEEE-754 floating-point exceptions, and Python |
| 7 | exceptions. |
| 8 | |
| 9 | These are the "spirit of 754" rules: |
| 10 | |
| 11 | 1. If the mathematical result is a real number, but of magnitude too |
| 12 | large to approximate by a machine float, overflow is signaled and the |
| 13 | result is an infinity (with the appropriate sign). |
| 14 | |
| 15 | 2. If the mathematical result is a real number, but of magnitude too |
| 16 | small to approximate by a machine float, underflow is signaled and the |
| 17 | result is a zero (with the appropriate sign). |
| 18 | |
| 19 | 3. At a singularity (a value x such that the limit of f(y) as y |
| 20 | approaches x exists and is an infinity), "divide by zero" is signaled |
| 21 | and the result is an infinity (with the appropriate sign). This is |
| 22 | complicated a little by that the left-side and right-side limits may |
| 23 | not be the same; e.g., 1/x approaches +inf or -inf as x approaches 0 |
| 24 | from the positive or negative directions. In that specific case, the |
| 25 | sign of the zero determines the result of 1/0. |
| 26 | |
| 27 | 4. At a point where a function has no defined result in the extended |
| 28 | reals (i.e., the reals plus an infinity or two), invalid operation is |
| 29 | signaled and a NaN is returned. |
| 30 | |
| 31 | And these are what Python has historically /tried/ to do (but not |
| 32 | always successfully, as platform libm behavior varies a lot): |
| 33 | |
| 34 | For #1, raise OverflowError. |
| 35 | |
| 36 | For #2, return a zero (with the appropriate sign if that happens by |
| 37 | accident ;-)). |
| 38 | |
| 39 | For #3 and #4, raise ValueError. It may have made sense to raise |
| 40 | Python's ZeroDivisionError in #3, but historically that's only been |
| 41 | raised for division by zero and mod by zero. |
| 42 | |
| 43 | */ |
| 44 | |
| 45 | /* |
| 46 | In general, on an IEEE-754 platform the aim is to follow the C99 |
| 47 | standard, including Annex 'F', whenever possible. Where the |
| 48 | standard recommends raising the 'divide-by-zero' or 'invalid' |
| 49 | floating-point exceptions, Python should raise a ValueError. Where |
| 50 | the standard recommends raising 'overflow', Python should raise an |
| 51 | OverflowError. In all other circumstances a value should be |
| 52 | returned. |
| 53 | */ |
| 54 | |
Barry Warsaw | 8b43b19 | 1996-12-09 22:32:36 +0000 | [diff] [blame] | 55 | #include "Python.h" |
Mark Dickinson | 664b511 | 2009-12-16 20:23:42 +0000 | [diff] [blame] | 56 | #include "_math.h" |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 57 | |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 58 | /* |
| 59 | sin(pi*x), giving accurate results for all finite x (especially x |
| 60 | integral or close to an integer). This is here for use in the |
| 61 | reflection formula for the gamma function. It conforms to IEEE |
| 62 | 754-2008 for finite arguments, but not for infinities or nans. |
| 63 | */ |
Tim Peters | a40c793 | 2001-09-05 22:36:56 +0000 | [diff] [blame] | 64 | |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 65 | static const double pi = 3.141592653589793238462643383279502884197; |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 66 | static const double sqrtpi = 1.772453850905516027298167483341145182798; |
Mark Dickinson | 9c91eb8 | 2010-07-07 16:17:31 +0000 | [diff] [blame] | 67 | static const double logpi = 1.144729885849400174143427351353058711647; |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 68 | |
| 69 | static double |
| 70 | sinpi(double x) |
| 71 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 72 | double y, r; |
| 73 | int n; |
| 74 | /* this function should only ever be called for finite arguments */ |
| 75 | assert(Py_IS_FINITE(x)); |
| 76 | y = fmod(fabs(x), 2.0); |
| 77 | n = (int)round(2.0*y); |
| 78 | assert(0 <= n && n <= 4); |
| 79 | switch (n) { |
| 80 | case 0: |
| 81 | r = sin(pi*y); |
| 82 | break; |
| 83 | case 1: |
| 84 | r = cos(pi*(y-0.5)); |
| 85 | break; |
| 86 | case 2: |
| 87 | /* N.B. -sin(pi*(y-1.0)) is *not* equivalent: it would give |
| 88 | -0.0 instead of 0.0 when y == 1.0. */ |
| 89 | r = sin(pi*(1.0-y)); |
| 90 | break; |
| 91 | case 3: |
| 92 | r = -cos(pi*(y-1.5)); |
| 93 | break; |
| 94 | case 4: |
| 95 | r = sin(pi*(y-2.0)); |
| 96 | break; |
| 97 | default: |
| 98 | assert(0); /* should never get here */ |
| 99 | r = -1.23e200; /* silence gcc warning */ |
| 100 | } |
| 101 | return copysign(1.0, x)*r; |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 102 | } |
| 103 | |
| 104 | /* Implementation of the real gamma function. In extensive but non-exhaustive |
| 105 | random tests, this function proved accurate to within <= 10 ulps across the |
| 106 | entire float domain. Note that accuracy may depend on the quality of the |
| 107 | system math functions, the pow function in particular. Special cases |
| 108 | follow C99 annex F. The parameters and method are tailored to platforms |
| 109 | whose double format is the IEEE 754 binary64 format. |
| 110 | |
| 111 | Method: for x > 0.0 we use the Lanczos approximation with parameters N=13 |
| 112 | and g=6.024680040776729583740234375; these parameters are amongst those |
| 113 | used by the Boost library. Following Boost (again), we re-express the |
| 114 | Lanczos sum as a rational function, and compute it that way. The |
| 115 | coefficients below were computed independently using MPFR, and have been |
| 116 | double-checked against the coefficients in the Boost source code. |
| 117 | |
| 118 | For x < 0.0 we use the reflection formula. |
| 119 | |
| 120 | There's one minor tweak that deserves explanation: Lanczos' formula for |
| 121 | Gamma(x) involves computing pow(x+g-0.5, x-0.5) / exp(x+g-0.5). For many x |
| 122 | values, x+g-0.5 can be represented exactly. However, in cases where it |
| 123 | can't be represented exactly the small error in x+g-0.5 can be magnified |
| 124 | significantly by the pow and exp calls, especially for large x. A cheap |
| 125 | correction is to multiply by (1 + e*g/(x+g-0.5)), where e is the error |
| 126 | involved in the computation of x+g-0.5 (that is, e = computed value of |
| 127 | x+g-0.5 - exact value of x+g-0.5). Here's the proof: |
| 128 | |
| 129 | Correction factor |
| 130 | ----------------- |
| 131 | Write x+g-0.5 = y-e, where y is exactly representable as an IEEE 754 |
| 132 | double, and e is tiny. Then: |
| 133 | |
| 134 | pow(x+g-0.5,x-0.5)/exp(x+g-0.5) = pow(y-e, x-0.5)/exp(y-e) |
| 135 | = pow(y, x-0.5)/exp(y) * C, |
| 136 | |
| 137 | where the correction_factor C is given by |
| 138 | |
| 139 | C = pow(1-e/y, x-0.5) * exp(e) |
| 140 | |
| 141 | Since e is tiny, pow(1-e/y, x-0.5) ~ 1-(x-0.5)*e/y, and exp(x) ~ 1+e, so: |
| 142 | |
| 143 | C ~ (1-(x-0.5)*e/y) * (1+e) ~ 1 + e*(y-(x-0.5))/y |
| 144 | |
| 145 | But y-(x-0.5) = g+e, and g+e ~ g. So we get C ~ 1 + e*g/y, and |
| 146 | |
| 147 | pow(x+g-0.5,x-0.5)/exp(x+g-0.5) ~ pow(y, x-0.5)/exp(y) * (1 + e*g/y), |
| 148 | |
| 149 | Note that for accuracy, when computing r*C it's better to do |
| 150 | |
| 151 | r + e*g/y*r; |
| 152 | |
| 153 | than |
| 154 | |
| 155 | r * (1 + e*g/y); |
| 156 | |
| 157 | since the addition in the latter throws away most of the bits of |
| 158 | information in e*g/y. |
| 159 | */ |
| 160 | |
| 161 | #define LANCZOS_N 13 |
| 162 | static const double lanczos_g = 6.024680040776729583740234375; |
| 163 | static const double lanczos_g_minus_half = 5.524680040776729583740234375; |
| 164 | static const double lanczos_num_coeffs[LANCZOS_N] = { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 165 | 23531376880.410759688572007674451636754734846804940, |
| 166 | 42919803642.649098768957899047001988850926355848959, |
| 167 | 35711959237.355668049440185451547166705960488635843, |
| 168 | 17921034426.037209699919755754458931112671403265390, |
| 169 | 6039542586.3520280050642916443072979210699388420708, |
| 170 | 1439720407.3117216736632230727949123939715485786772, |
| 171 | 248874557.86205415651146038641322942321632125127801, |
| 172 | 31426415.585400194380614231628318205362874684987640, |
| 173 | 2876370.6289353724412254090516208496135991145378768, |
| 174 | 186056.26539522349504029498971604569928220784236328, |
| 175 | 8071.6720023658162106380029022722506138218516325024, |
| 176 | 210.82427775157934587250973392071336271166969580291, |
| 177 | 2.5066282746310002701649081771338373386264310793408 |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 178 | }; |
| 179 | |
| 180 | /* denominator is x*(x+1)*...*(x+LANCZOS_N-2) */ |
| 181 | static const double lanczos_den_coeffs[LANCZOS_N] = { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 182 | 0.0, 39916800.0, 120543840.0, 150917976.0, 105258076.0, 45995730.0, |
| 183 | 13339535.0, 2637558.0, 357423.0, 32670.0, 1925.0, 66.0, 1.0}; |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 184 | |
| 185 | /* gamma values for small positive integers, 1 though NGAMMA_INTEGRAL */ |
| 186 | #define NGAMMA_INTEGRAL 23 |
| 187 | static const double gamma_integral[NGAMMA_INTEGRAL] = { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 188 | 1.0, 1.0, 2.0, 6.0, 24.0, 120.0, 720.0, 5040.0, 40320.0, 362880.0, |
| 189 | 3628800.0, 39916800.0, 479001600.0, 6227020800.0, 87178291200.0, |
| 190 | 1307674368000.0, 20922789888000.0, 355687428096000.0, |
| 191 | 6402373705728000.0, 121645100408832000.0, 2432902008176640000.0, |
| 192 | 51090942171709440000.0, 1124000727777607680000.0, |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 193 | }; |
| 194 | |
| 195 | /* Lanczos' sum L_g(x), for positive x */ |
| 196 | |
| 197 | static double |
| 198 | lanczos_sum(double x) |
| 199 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 200 | double num = 0.0, den = 0.0; |
| 201 | int i; |
| 202 | assert(x > 0.0); |
| 203 | /* evaluate the rational function lanczos_sum(x). For large |
| 204 | x, the obvious algorithm risks overflow, so we instead |
| 205 | rescale the denominator and numerator of the rational |
| 206 | function by x**(1-LANCZOS_N) and treat this as a |
| 207 | rational function in 1/x. This also reduces the error for |
| 208 | larger x values. The choice of cutoff point (5.0 below) is |
| 209 | somewhat arbitrary; in tests, smaller cutoff values than |
| 210 | this resulted in lower accuracy. */ |
| 211 | if (x < 5.0) { |
| 212 | for (i = LANCZOS_N; --i >= 0; ) { |
| 213 | num = num * x + lanczos_num_coeffs[i]; |
| 214 | den = den * x + lanczos_den_coeffs[i]; |
| 215 | } |
| 216 | } |
| 217 | else { |
| 218 | for (i = 0; i < LANCZOS_N; i++) { |
| 219 | num = num / x + lanczos_num_coeffs[i]; |
| 220 | den = den / x + lanczos_den_coeffs[i]; |
| 221 | } |
| 222 | } |
| 223 | return num/den; |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 224 | } |
| 225 | |
Mark Dickinson | a5d0c7c | 2015-01-11 11:55:29 +0000 | [diff] [blame] | 226 | /* Constant for +infinity, generated in the same way as float('inf'). */ |
| 227 | |
| 228 | static double |
| 229 | m_inf(void) |
| 230 | { |
| 231 | #ifndef PY_NO_SHORT_FLOAT_REPR |
| 232 | return _Py_dg_infinity(0); |
| 233 | #else |
| 234 | return Py_HUGE_VAL; |
| 235 | #endif |
| 236 | } |
| 237 | |
| 238 | /* Constant nan value, generated in the same way as float('nan'). */ |
| 239 | /* We don't currently assume that Py_NAN is defined everywhere. */ |
| 240 | |
| 241 | #if !defined(PY_NO_SHORT_FLOAT_REPR) || defined(Py_NAN) |
| 242 | |
| 243 | static double |
| 244 | m_nan(void) |
| 245 | { |
| 246 | #ifndef PY_NO_SHORT_FLOAT_REPR |
| 247 | return _Py_dg_stdnan(0); |
| 248 | #else |
| 249 | return Py_NAN; |
| 250 | #endif |
| 251 | } |
| 252 | |
| 253 | #endif |
| 254 | |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 255 | static double |
| 256 | m_tgamma(double x) |
| 257 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 258 | double absx, r, y, z, sqrtpow; |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 259 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 260 | /* special cases */ |
| 261 | if (!Py_IS_FINITE(x)) { |
| 262 | if (Py_IS_NAN(x) || x > 0.0) |
| 263 | return x; /* tgamma(nan) = nan, tgamma(inf) = inf */ |
| 264 | else { |
| 265 | errno = EDOM; |
| 266 | return Py_NAN; /* tgamma(-inf) = nan, invalid */ |
| 267 | } |
| 268 | } |
| 269 | if (x == 0.0) { |
| 270 | errno = EDOM; |
Mark Dickinson | 50203a6 | 2011-09-25 15:26:43 +0100 | [diff] [blame] | 271 | /* tgamma(+-0.0) = +-inf, divide-by-zero */ |
| 272 | return copysign(Py_HUGE_VAL, x); |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 273 | } |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 274 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 275 | /* integer arguments */ |
| 276 | if (x == floor(x)) { |
| 277 | if (x < 0.0) { |
| 278 | errno = EDOM; /* tgamma(n) = nan, invalid for */ |
| 279 | return Py_NAN; /* negative integers n */ |
| 280 | } |
| 281 | if (x <= NGAMMA_INTEGRAL) |
| 282 | return gamma_integral[(int)x - 1]; |
| 283 | } |
| 284 | absx = fabs(x); |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 285 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 286 | /* tiny arguments: tgamma(x) ~ 1/x for x near 0 */ |
| 287 | if (absx < 1e-20) { |
| 288 | r = 1.0/x; |
| 289 | if (Py_IS_INFINITY(r)) |
| 290 | errno = ERANGE; |
| 291 | return r; |
| 292 | } |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 293 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 294 | /* large arguments: assuming IEEE 754 doubles, tgamma(x) overflows for |
| 295 | x > 200, and underflows to +-0.0 for x < -200, not a negative |
| 296 | integer. */ |
| 297 | if (absx > 200.0) { |
| 298 | if (x < 0.0) { |
| 299 | return 0.0/sinpi(x); |
| 300 | } |
| 301 | else { |
| 302 | errno = ERANGE; |
| 303 | return Py_HUGE_VAL; |
| 304 | } |
| 305 | } |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 306 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 307 | y = absx + lanczos_g_minus_half; |
| 308 | /* compute error in sum */ |
| 309 | if (absx > lanczos_g_minus_half) { |
| 310 | /* note: the correction can be foiled by an optimizing |
| 311 | compiler that (incorrectly) thinks that an expression like |
| 312 | a + b - a - b can be optimized to 0.0. This shouldn't |
| 313 | happen in a standards-conforming compiler. */ |
| 314 | double q = y - absx; |
| 315 | z = q - lanczos_g_minus_half; |
| 316 | } |
| 317 | else { |
| 318 | double q = y - lanczos_g_minus_half; |
| 319 | z = q - absx; |
| 320 | } |
| 321 | z = z * lanczos_g / y; |
| 322 | if (x < 0.0) { |
| 323 | r = -pi / sinpi(absx) / absx * exp(y) / lanczos_sum(absx); |
| 324 | r -= z * r; |
| 325 | if (absx < 140.0) { |
| 326 | r /= pow(y, absx - 0.5); |
| 327 | } |
| 328 | else { |
| 329 | sqrtpow = pow(y, absx / 2.0 - 0.25); |
| 330 | r /= sqrtpow; |
| 331 | r /= sqrtpow; |
| 332 | } |
| 333 | } |
| 334 | else { |
| 335 | r = lanczos_sum(absx) / exp(y); |
| 336 | r += z * r; |
| 337 | if (absx < 140.0) { |
| 338 | r *= pow(y, absx - 0.5); |
| 339 | } |
| 340 | else { |
| 341 | sqrtpow = pow(y, absx / 2.0 - 0.25); |
| 342 | r *= sqrtpow; |
| 343 | r *= sqrtpow; |
| 344 | } |
| 345 | } |
| 346 | if (Py_IS_INFINITY(r)) |
| 347 | errno = ERANGE; |
| 348 | return r; |
Guido van Rossum | 8832b62 | 1991-12-16 15:44:24 +0000 | [diff] [blame] | 349 | } |
| 350 | |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 351 | /* |
Mark Dickinson | 05d2e08 | 2009-12-11 20:17:17 +0000 | [diff] [blame] | 352 | lgamma: natural log of the absolute value of the Gamma function. |
| 353 | For large arguments, Lanczos' formula works extremely well here. |
| 354 | */ |
| 355 | |
| 356 | static double |
| 357 | m_lgamma(double x) |
| 358 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 359 | double r, absx; |
Mark Dickinson | 05d2e08 | 2009-12-11 20:17:17 +0000 | [diff] [blame] | 360 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 361 | /* special cases */ |
| 362 | if (!Py_IS_FINITE(x)) { |
| 363 | if (Py_IS_NAN(x)) |
| 364 | return x; /* lgamma(nan) = nan */ |
| 365 | else |
| 366 | return Py_HUGE_VAL; /* lgamma(+-inf) = +inf */ |
| 367 | } |
Mark Dickinson | 05d2e08 | 2009-12-11 20:17:17 +0000 | [diff] [blame] | 368 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 369 | /* integer arguments */ |
| 370 | if (x == floor(x) && x <= 2.0) { |
| 371 | if (x <= 0.0) { |
| 372 | errno = EDOM; /* lgamma(n) = inf, divide-by-zero for */ |
| 373 | return Py_HUGE_VAL; /* integers n <= 0 */ |
| 374 | } |
| 375 | else { |
| 376 | return 0.0; /* lgamma(1) = lgamma(2) = 0.0 */ |
| 377 | } |
| 378 | } |
Mark Dickinson | 05d2e08 | 2009-12-11 20:17:17 +0000 | [diff] [blame] | 379 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 380 | absx = fabs(x); |
| 381 | /* tiny arguments: lgamma(x) ~ -log(fabs(x)) for small x */ |
| 382 | if (absx < 1e-20) |
| 383 | return -log(absx); |
Mark Dickinson | 05d2e08 | 2009-12-11 20:17:17 +0000 | [diff] [blame] | 384 | |
Mark Dickinson | 9c91eb8 | 2010-07-07 16:17:31 +0000 | [diff] [blame] | 385 | /* Lanczos' formula. We could save a fraction of a ulp in accuracy by |
| 386 | having a second set of numerator coefficients for lanczos_sum that |
| 387 | absorbed the exp(-lanczos_g) term, and throwing out the lanczos_g |
| 388 | subtraction below; it's probably not worth it. */ |
| 389 | r = log(lanczos_sum(absx)) - lanczos_g; |
| 390 | r += (absx - 0.5) * (log(absx + lanczos_g - 0.5) - 1); |
| 391 | if (x < 0.0) |
| 392 | /* Use reflection formula to get value for negative x. */ |
| 393 | r = logpi - log(fabs(sinpi(absx))) - log(absx) - r; |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 394 | if (Py_IS_INFINITY(r)) |
| 395 | errno = ERANGE; |
| 396 | return r; |
Mark Dickinson | 05d2e08 | 2009-12-11 20:17:17 +0000 | [diff] [blame] | 397 | } |
| 398 | |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 399 | /* |
| 400 | Implementations of the error function erf(x) and the complementary error |
| 401 | function erfc(x). |
| 402 | |
Brett Cannon | 45adb31 | 2016-01-15 09:38:24 -0800 | [diff] [blame^] | 403 | Method: we use a series approximation for erf for small x, and a continued |
| 404 | fraction approximation for erfc(x) for larger x; |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 405 | combined with the relations erf(-x) = -erf(x) and erfc(x) = 1.0 - erf(x), |
| 406 | this gives us erf(x) and erfc(x) for all x. |
| 407 | |
| 408 | The series expansion used is: |
| 409 | |
| 410 | erf(x) = x*exp(-x*x)/sqrt(pi) * [ |
| 411 | 2/1 + 4/3 x**2 + 8/15 x**4 + 16/105 x**6 + ...] |
| 412 | |
| 413 | The coefficient of x**(2k-2) here is 4**k*factorial(k)/factorial(2*k). |
| 414 | This series converges well for smallish x, but slowly for larger x. |
| 415 | |
| 416 | The continued fraction expansion used is: |
| 417 | |
| 418 | erfc(x) = x*exp(-x*x)/sqrt(pi) * [1/(0.5 + x**2 -) 0.5/(2.5 + x**2 - ) |
| 419 | 3.0/(4.5 + x**2 - ) 7.5/(6.5 + x**2 - ) ...] |
| 420 | |
| 421 | after the first term, the general term has the form: |
| 422 | |
| 423 | k*(k-0.5)/(2*k+0.5 + x**2 - ...). |
| 424 | |
| 425 | This expansion converges fast for larger x, but convergence becomes |
| 426 | infinitely slow as x approaches 0.0. The (somewhat naive) continued |
| 427 | fraction evaluation algorithm used below also risks overflow for large x; |
| 428 | but for large x, erfc(x) == 0.0 to within machine precision. (For |
| 429 | example, erfc(30.0) is approximately 2.56e-393). |
| 430 | |
| 431 | Parameters: use series expansion for abs(x) < ERF_SERIES_CUTOFF and |
| 432 | continued fraction expansion for ERF_SERIES_CUTOFF <= abs(x) < |
| 433 | ERFC_CONTFRAC_CUTOFF. ERFC_SERIES_TERMS and ERFC_CONTFRAC_TERMS are the |
| 434 | numbers of terms to use for the relevant expansions. */ |
| 435 | |
| 436 | #define ERF_SERIES_CUTOFF 1.5 |
| 437 | #define ERF_SERIES_TERMS 25 |
| 438 | #define ERFC_CONTFRAC_CUTOFF 30.0 |
| 439 | #define ERFC_CONTFRAC_TERMS 50 |
| 440 | |
| 441 | /* |
| 442 | Error function, via power series. |
| 443 | |
| 444 | Given a finite float x, return an approximation to erf(x). |
| 445 | Converges reasonably fast for small x. |
| 446 | */ |
| 447 | |
| 448 | static double |
| 449 | m_erf_series(double x) |
| 450 | { |
Mark Dickinson | bcdf9da | 2010-06-13 10:52:38 +0000 | [diff] [blame] | 451 | double x2, acc, fk, result; |
| 452 | int i, saved_errno; |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 453 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 454 | x2 = x * x; |
| 455 | acc = 0.0; |
| 456 | fk = (double)ERF_SERIES_TERMS + 0.5; |
| 457 | for (i = 0; i < ERF_SERIES_TERMS; i++) { |
| 458 | acc = 2.0 + x2 * acc / fk; |
| 459 | fk -= 1.0; |
| 460 | } |
Mark Dickinson | bcdf9da | 2010-06-13 10:52:38 +0000 | [diff] [blame] | 461 | /* Make sure the exp call doesn't affect errno; |
| 462 | see m_erfc_contfrac for more. */ |
| 463 | saved_errno = errno; |
| 464 | result = acc * x * exp(-x2) / sqrtpi; |
| 465 | errno = saved_errno; |
| 466 | return result; |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 467 | } |
| 468 | |
| 469 | /* |
| 470 | Complementary error function, via continued fraction expansion. |
| 471 | |
| 472 | Given a positive float x, return an approximation to erfc(x). Converges |
| 473 | reasonably fast for x large (say, x > 2.0), and should be safe from |
| 474 | overflow if x and nterms are not too large. On an IEEE 754 machine, with x |
| 475 | <= 30.0, we're safe up to nterms = 100. For x >= 30.0, erfc(x) is smaller |
| 476 | than the smallest representable nonzero float. */ |
| 477 | |
| 478 | static double |
| 479 | m_erfc_contfrac(double x) |
| 480 | { |
Mark Dickinson | bcdf9da | 2010-06-13 10:52:38 +0000 | [diff] [blame] | 481 | double x2, a, da, p, p_last, q, q_last, b, result; |
| 482 | int i, saved_errno; |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 483 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 484 | if (x >= ERFC_CONTFRAC_CUTOFF) |
| 485 | return 0.0; |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 486 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 487 | x2 = x*x; |
| 488 | a = 0.0; |
| 489 | da = 0.5; |
| 490 | p = 1.0; p_last = 0.0; |
| 491 | q = da + x2; q_last = 1.0; |
| 492 | for (i = 0; i < ERFC_CONTFRAC_TERMS; i++) { |
| 493 | double temp; |
| 494 | a += da; |
| 495 | da += 2.0; |
| 496 | b = da + x2; |
| 497 | temp = p; p = b*p - a*p_last; p_last = temp; |
| 498 | temp = q; q = b*q - a*q_last; q_last = temp; |
| 499 | } |
Mark Dickinson | bcdf9da | 2010-06-13 10:52:38 +0000 | [diff] [blame] | 500 | /* Issue #8986: On some platforms, exp sets errno on underflow to zero; |
| 501 | save the current errno value so that we can restore it later. */ |
| 502 | saved_errno = errno; |
| 503 | result = p / q * x * exp(-x2) / sqrtpi; |
| 504 | errno = saved_errno; |
| 505 | return result; |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 506 | } |
| 507 | |
| 508 | /* Error function erf(x), for general x */ |
| 509 | |
| 510 | static double |
| 511 | m_erf(double x) |
| 512 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 513 | double absx, cf; |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 514 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 515 | if (Py_IS_NAN(x)) |
| 516 | return x; |
| 517 | absx = fabs(x); |
| 518 | if (absx < ERF_SERIES_CUTOFF) |
| 519 | return m_erf_series(x); |
| 520 | else { |
| 521 | cf = m_erfc_contfrac(absx); |
| 522 | return x > 0.0 ? 1.0 - cf : cf - 1.0; |
| 523 | } |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 524 | } |
| 525 | |
| 526 | /* Complementary error function erfc(x), for general x. */ |
| 527 | |
| 528 | static double |
| 529 | m_erfc(double x) |
| 530 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 531 | double absx, cf; |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 532 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 533 | if (Py_IS_NAN(x)) |
| 534 | return x; |
| 535 | absx = fabs(x); |
| 536 | if (absx < ERF_SERIES_CUTOFF) |
| 537 | return 1.0 - m_erf_series(x); |
| 538 | else { |
| 539 | cf = m_erfc_contfrac(absx); |
| 540 | return x > 0.0 ? cf : 2.0 - cf; |
| 541 | } |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 542 | } |
Mark Dickinson | 05d2e08 | 2009-12-11 20:17:17 +0000 | [diff] [blame] | 543 | |
| 544 | /* |
Christian Heimes | e57950f | 2008-04-21 13:08:03 +0000 | [diff] [blame] | 545 | wrapper for atan2 that deals directly with special cases before |
| 546 | delegating to the platform libm for the remaining cases. This |
| 547 | is necessary to get consistent behaviour across platforms. |
| 548 | Windows, FreeBSD and alpha Tru64 are amongst platforms that don't |
| 549 | always follow C99. |
| 550 | */ |
| 551 | |
| 552 | static double |
| 553 | m_atan2(double y, double x) |
| 554 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 555 | if (Py_IS_NAN(x) || Py_IS_NAN(y)) |
| 556 | return Py_NAN; |
| 557 | if (Py_IS_INFINITY(y)) { |
| 558 | if (Py_IS_INFINITY(x)) { |
| 559 | if (copysign(1., x) == 1.) |
| 560 | /* atan2(+-inf, +inf) == +-pi/4 */ |
| 561 | return copysign(0.25*Py_MATH_PI, y); |
| 562 | else |
| 563 | /* atan2(+-inf, -inf) == +-pi*3/4 */ |
| 564 | return copysign(0.75*Py_MATH_PI, y); |
| 565 | } |
| 566 | /* atan2(+-inf, x) == +-pi/2 for finite x */ |
| 567 | return copysign(0.5*Py_MATH_PI, y); |
| 568 | } |
| 569 | if (Py_IS_INFINITY(x) || y == 0.) { |
| 570 | if (copysign(1., x) == 1.) |
| 571 | /* atan2(+-y, +inf) = atan2(+-0, +x) = +-0. */ |
| 572 | return copysign(0., y); |
| 573 | else |
| 574 | /* atan2(+-y, -inf) = atan2(+-0., -x) = +-pi. */ |
| 575 | return copysign(Py_MATH_PI, y); |
| 576 | } |
| 577 | return atan2(y, x); |
Christian Heimes | e57950f | 2008-04-21 13:08:03 +0000 | [diff] [blame] | 578 | } |
| 579 | |
| 580 | /* |
Mark Dickinson | e675f08 | 2008-12-11 21:56:00 +0000 | [diff] [blame] | 581 | Various platforms (Solaris, OpenBSD) do nonstandard things for log(0), |
| 582 | log(-ve), log(NaN). Here are wrappers for log and log10 that deal with |
| 583 | special values directly, passing positive non-special values through to |
| 584 | the system log/log10. |
| 585 | */ |
| 586 | |
| 587 | static double |
| 588 | m_log(double x) |
| 589 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 590 | if (Py_IS_FINITE(x)) { |
| 591 | if (x > 0.0) |
| 592 | return log(x); |
| 593 | errno = EDOM; |
| 594 | if (x == 0.0) |
| 595 | return -Py_HUGE_VAL; /* log(0) = -inf */ |
| 596 | else |
| 597 | return Py_NAN; /* log(-ve) = nan */ |
| 598 | } |
| 599 | else if (Py_IS_NAN(x)) |
| 600 | return x; /* log(nan) = nan */ |
| 601 | else if (x > 0.0) |
| 602 | return x; /* log(inf) = inf */ |
| 603 | else { |
| 604 | errno = EDOM; |
| 605 | return Py_NAN; /* log(-inf) = nan */ |
| 606 | } |
Mark Dickinson | e675f08 | 2008-12-11 21:56:00 +0000 | [diff] [blame] | 607 | } |
| 608 | |
Victor Stinner | fa0e3d5 | 2011-05-09 01:01:09 +0200 | [diff] [blame] | 609 | /* |
| 610 | log2: log to base 2. |
| 611 | |
| 612 | Uses an algorithm that should: |
Mark Dickinson | 83b8c0b | 2011-05-09 08:40:20 +0100 | [diff] [blame] | 613 | |
Victor Stinner | fa0e3d5 | 2011-05-09 01:01:09 +0200 | [diff] [blame] | 614 | (a) produce exact results for powers of 2, and |
Mark Dickinson | 83b8c0b | 2011-05-09 08:40:20 +0100 | [diff] [blame] | 615 | (b) give a monotonic log2 (for positive finite floats), |
| 616 | assuming that the system log is monotonic. |
Victor Stinner | fa0e3d5 | 2011-05-09 01:01:09 +0200 | [diff] [blame] | 617 | */ |
| 618 | |
| 619 | static double |
| 620 | m_log2(double x) |
| 621 | { |
| 622 | if (!Py_IS_FINITE(x)) { |
| 623 | if (Py_IS_NAN(x)) |
| 624 | return x; /* log2(nan) = nan */ |
| 625 | else if (x > 0.0) |
| 626 | return x; /* log2(+inf) = +inf */ |
| 627 | else { |
| 628 | errno = EDOM; |
| 629 | return Py_NAN; /* log2(-inf) = nan, invalid-operation */ |
| 630 | } |
| 631 | } |
| 632 | |
| 633 | if (x > 0.0) { |
Victor Stinner | 8f9f8d6 | 2011-05-09 12:45:41 +0200 | [diff] [blame] | 634 | #ifdef HAVE_LOG2 |
| 635 | return log2(x); |
| 636 | #else |
Victor Stinner | fa0e3d5 | 2011-05-09 01:01:09 +0200 | [diff] [blame] | 637 | double m; |
| 638 | int e; |
| 639 | m = frexp(x, &e); |
| 640 | /* We want log2(m * 2**e) == log(m) / log(2) + e. Care is needed when |
| 641 | * x is just greater than 1.0: in that case e is 1, log(m) is negative, |
| 642 | * and we get significant cancellation error from the addition of |
| 643 | * log(m) / log(2) to e. The slight rewrite of the expression below |
| 644 | * avoids this problem. |
| 645 | */ |
| 646 | if (x >= 1.0) { |
| 647 | return log(2.0 * m) / log(2.0) + (e - 1); |
| 648 | } |
| 649 | else { |
| 650 | return log(m) / log(2.0) + e; |
| 651 | } |
Victor Stinner | 8f9f8d6 | 2011-05-09 12:45:41 +0200 | [diff] [blame] | 652 | #endif |
Victor Stinner | fa0e3d5 | 2011-05-09 01:01:09 +0200 | [diff] [blame] | 653 | } |
| 654 | else if (x == 0.0) { |
| 655 | errno = EDOM; |
| 656 | return -Py_HUGE_VAL; /* log2(0) = -inf, divide-by-zero */ |
| 657 | } |
| 658 | else { |
| 659 | errno = EDOM; |
Mark Dickinson | 2344258 | 2011-05-09 08:05:00 +0100 | [diff] [blame] | 660 | return Py_NAN; /* log2(-inf) = nan, invalid-operation */ |
Victor Stinner | fa0e3d5 | 2011-05-09 01:01:09 +0200 | [diff] [blame] | 661 | } |
| 662 | } |
| 663 | |
Mark Dickinson | e675f08 | 2008-12-11 21:56:00 +0000 | [diff] [blame] | 664 | static double |
| 665 | m_log10(double x) |
| 666 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 667 | if (Py_IS_FINITE(x)) { |
| 668 | if (x > 0.0) |
| 669 | return log10(x); |
| 670 | errno = EDOM; |
| 671 | if (x == 0.0) |
| 672 | return -Py_HUGE_VAL; /* log10(0) = -inf */ |
| 673 | else |
| 674 | return Py_NAN; /* log10(-ve) = nan */ |
| 675 | } |
| 676 | else if (Py_IS_NAN(x)) |
| 677 | return x; /* log10(nan) = nan */ |
| 678 | else if (x > 0.0) |
| 679 | return x; /* log10(inf) = inf */ |
| 680 | else { |
| 681 | errno = EDOM; |
| 682 | return Py_NAN; /* log10(-inf) = nan */ |
| 683 | } |
Mark Dickinson | e675f08 | 2008-12-11 21:56:00 +0000 | [diff] [blame] | 684 | } |
| 685 | |
| 686 | |
Serhiy Storchaka | 48e47aa | 2015-05-13 00:19:51 +0300 | [diff] [blame] | 687 | static PyObject * |
| 688 | math_gcd(PyObject *self, PyObject *args) |
| 689 | { |
| 690 | PyObject *a, *b, *g; |
| 691 | |
| 692 | if (!PyArg_ParseTuple(args, "OO:gcd", &a, &b)) |
| 693 | return NULL; |
| 694 | |
| 695 | a = PyNumber_Index(a); |
| 696 | if (a == NULL) |
| 697 | return NULL; |
| 698 | b = PyNumber_Index(b); |
| 699 | if (b == NULL) { |
| 700 | Py_DECREF(a); |
| 701 | return NULL; |
| 702 | } |
| 703 | g = _PyLong_GCD(a, b); |
| 704 | Py_DECREF(a); |
| 705 | Py_DECREF(b); |
| 706 | return g; |
| 707 | } |
| 708 | |
| 709 | PyDoc_STRVAR(math_gcd_doc, |
| 710 | "gcd(x, y) -> int\n\ |
| 711 | greatest common divisor of x and y"); |
| 712 | |
| 713 | |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 714 | /* Call is_error when errno != 0, and where x is the result libm |
| 715 | * returned. is_error will usually set up an exception and return |
| 716 | * true (1), but may return false (0) without setting up an exception. |
| 717 | */ |
| 718 | static int |
| 719 | is_error(double x) |
| 720 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 721 | int result = 1; /* presumption of guilt */ |
| 722 | assert(errno); /* non-zero errno is a precondition for calling */ |
| 723 | if (errno == EDOM) |
| 724 | PyErr_SetString(PyExc_ValueError, "math domain error"); |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 725 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 726 | else if (errno == ERANGE) { |
| 727 | /* ANSI C generally requires libm functions to set ERANGE |
| 728 | * on overflow, but also generally *allows* them to set |
| 729 | * ERANGE on underflow too. There's no consistency about |
| 730 | * the latter across platforms. |
| 731 | * Alas, C99 never requires that errno be set. |
| 732 | * Here we suppress the underflow errors (libm functions |
| 733 | * should return a zero on underflow, and +- HUGE_VAL on |
| 734 | * overflow, so testing the result for zero suffices to |
| 735 | * distinguish the cases). |
| 736 | * |
| 737 | * On some platforms (Ubuntu/ia64) it seems that errno can be |
| 738 | * set to ERANGE for subnormal results that do *not* underflow |
| 739 | * to zero. So to be safe, we'll ignore ERANGE whenever the |
| 740 | * function result is less than one in absolute value. |
| 741 | */ |
| 742 | if (fabs(x) < 1.0) |
| 743 | result = 0; |
| 744 | else |
| 745 | PyErr_SetString(PyExc_OverflowError, |
| 746 | "math range error"); |
| 747 | } |
| 748 | else |
| 749 | /* Unexpected math error */ |
| 750 | PyErr_SetFromErrno(PyExc_ValueError); |
| 751 | return result; |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 752 | } |
| 753 | |
Mark Dickinson | e675f08 | 2008-12-11 21:56:00 +0000 | [diff] [blame] | 754 | /* |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 755 | math_1 is used to wrap a libm function f that takes a double |
| 756 | arguments and returns a double. |
| 757 | |
| 758 | The error reporting follows these rules, which are designed to do |
| 759 | the right thing on C89/C99 platforms and IEEE 754/non IEEE 754 |
| 760 | platforms. |
| 761 | |
| 762 | - a NaN result from non-NaN inputs causes ValueError to be raised |
| 763 | - an infinite result from finite inputs causes OverflowError to be |
| 764 | raised if can_overflow is 1, or raises ValueError if can_overflow |
| 765 | is 0. |
| 766 | - if the result is finite and errno == EDOM then ValueError is |
| 767 | raised |
| 768 | - if the result is finite and nonzero and errno == ERANGE then |
| 769 | OverflowError is raised |
| 770 | |
| 771 | The last rule is used to catch overflow on platforms which follow |
| 772 | C89 but for which HUGE_VAL is not an infinity. |
| 773 | |
| 774 | For the majority of one-argument functions these rules are enough |
| 775 | to ensure that Python's functions behave as specified in 'Annex F' |
| 776 | of the C99 standard, with the 'invalid' and 'divide-by-zero' |
| 777 | floating-point exceptions mapping to Python's ValueError and the |
| 778 | 'overflow' floating-point exception mapping to OverflowError. |
| 779 | math_1 only works for functions that don't have singularities *and* |
| 780 | the possibility of overflow; fortunately, that covers everything we |
| 781 | care about right now. |
| 782 | */ |
| 783 | |
Barry Warsaw | 8b43b19 | 1996-12-09 22:32:36 +0000 | [diff] [blame] | 784 | static PyObject * |
Jeffrey Yasskin | c215583 | 2008-01-05 20:03:11 +0000 | [diff] [blame] | 785 | math_1_to_whatever(PyObject *arg, double (*func) (double), |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 786 | PyObject *(*from_double_func) (double), |
| 787 | int can_overflow) |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 788 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 789 | double x, r; |
| 790 | x = PyFloat_AsDouble(arg); |
| 791 | if (x == -1.0 && PyErr_Occurred()) |
| 792 | return NULL; |
| 793 | errno = 0; |
| 794 | PyFPE_START_PROTECT("in math_1", return 0); |
| 795 | r = (*func)(x); |
| 796 | PyFPE_END_PROTECT(r); |
| 797 | if (Py_IS_NAN(r) && !Py_IS_NAN(x)) { |
| 798 | PyErr_SetString(PyExc_ValueError, |
| 799 | "math domain error"); /* invalid arg */ |
| 800 | return NULL; |
| 801 | } |
| 802 | if (Py_IS_INFINITY(r) && Py_IS_FINITE(x)) { |
Benjamin Peterson | 2354a75 | 2012-03-13 16:13:09 -0500 | [diff] [blame] | 803 | if (can_overflow) |
| 804 | PyErr_SetString(PyExc_OverflowError, |
| 805 | "math range error"); /* overflow */ |
| 806 | else |
| 807 | PyErr_SetString(PyExc_ValueError, |
| 808 | "math domain error"); /* singularity */ |
| 809 | return NULL; |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 810 | } |
| 811 | if (Py_IS_FINITE(r) && errno && is_error(r)) |
| 812 | /* this branch unnecessary on most platforms */ |
| 813 | return NULL; |
Mark Dickinson | de42962 | 2008-05-01 00:19:23 +0000 | [diff] [blame] | 814 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 815 | return (*from_double_func)(r); |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 816 | } |
| 817 | |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 818 | /* variant of math_1, to be used when the function being wrapped is known to |
| 819 | set errno properly (that is, errno = EDOM for invalid or divide-by-zero, |
| 820 | errno = ERANGE for overflow). */ |
| 821 | |
| 822 | static PyObject * |
| 823 | math_1a(PyObject *arg, double (*func) (double)) |
| 824 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 825 | double x, r; |
| 826 | x = PyFloat_AsDouble(arg); |
| 827 | if (x == -1.0 && PyErr_Occurred()) |
| 828 | return NULL; |
| 829 | errno = 0; |
| 830 | PyFPE_START_PROTECT("in math_1a", return 0); |
| 831 | r = (*func)(x); |
| 832 | PyFPE_END_PROTECT(r); |
| 833 | if (errno && is_error(r)) |
| 834 | return NULL; |
| 835 | return PyFloat_FromDouble(r); |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 836 | } |
| 837 | |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 838 | /* |
| 839 | math_2 is used to wrap a libm function f that takes two double |
| 840 | arguments and returns a double. |
| 841 | |
| 842 | The error reporting follows these rules, which are designed to do |
| 843 | the right thing on C89/C99 platforms and IEEE 754/non IEEE 754 |
| 844 | platforms. |
| 845 | |
| 846 | - a NaN result from non-NaN inputs causes ValueError to be raised |
| 847 | - an infinite result from finite inputs causes OverflowError to be |
| 848 | raised. |
| 849 | - if the result is finite and errno == EDOM then ValueError is |
| 850 | raised |
| 851 | - if the result is finite and nonzero and errno == ERANGE then |
| 852 | OverflowError is raised |
| 853 | |
| 854 | The last rule is used to catch overflow on platforms which follow |
| 855 | C89 but for which HUGE_VAL is not an infinity. |
| 856 | |
| 857 | For most two-argument functions (copysign, fmod, hypot, atan2) |
| 858 | these rules are enough to ensure that Python's functions behave as |
| 859 | specified in 'Annex F' of the C99 standard, with the 'invalid' and |
| 860 | 'divide-by-zero' floating-point exceptions mapping to Python's |
| 861 | ValueError and the 'overflow' floating-point exception mapping to |
| 862 | OverflowError. |
| 863 | */ |
| 864 | |
| 865 | static PyObject * |
| 866 | math_1(PyObject *arg, double (*func) (double), int can_overflow) |
| 867 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 868 | return math_1_to_whatever(arg, func, PyFloat_FromDouble, can_overflow); |
Jeffrey Yasskin | c215583 | 2008-01-05 20:03:11 +0000 | [diff] [blame] | 869 | } |
| 870 | |
| 871 | static PyObject * |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 872 | math_1_to_int(PyObject *arg, double (*func) (double), int can_overflow) |
Jeffrey Yasskin | c215583 | 2008-01-05 20:03:11 +0000 | [diff] [blame] | 873 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 874 | return math_1_to_whatever(arg, func, PyLong_FromDouble, can_overflow); |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 875 | } |
| 876 | |
Barry Warsaw | 8b43b19 | 1996-12-09 22:32:36 +0000 | [diff] [blame] | 877 | static PyObject * |
Thomas Wouters | 89f507f | 2006-12-13 04:49:30 +0000 | [diff] [blame] | 878 | math_2(PyObject *args, double (*func) (double, double), char *funcname) |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 879 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 880 | PyObject *ox, *oy; |
| 881 | double x, y, r; |
| 882 | if (! PyArg_UnpackTuple(args, funcname, 2, 2, &ox, &oy)) |
| 883 | return NULL; |
| 884 | x = PyFloat_AsDouble(ox); |
| 885 | y = PyFloat_AsDouble(oy); |
| 886 | if ((x == -1.0 || y == -1.0) && PyErr_Occurred()) |
| 887 | return NULL; |
| 888 | errno = 0; |
| 889 | PyFPE_START_PROTECT("in math_2", return 0); |
| 890 | r = (*func)(x, y); |
| 891 | PyFPE_END_PROTECT(r); |
| 892 | if (Py_IS_NAN(r)) { |
| 893 | if (!Py_IS_NAN(x) && !Py_IS_NAN(y)) |
| 894 | errno = EDOM; |
| 895 | else |
| 896 | errno = 0; |
| 897 | } |
| 898 | else if (Py_IS_INFINITY(r)) { |
| 899 | if (Py_IS_FINITE(x) && Py_IS_FINITE(y)) |
| 900 | errno = ERANGE; |
| 901 | else |
| 902 | errno = 0; |
| 903 | } |
| 904 | if (errno && is_error(r)) |
| 905 | return NULL; |
| 906 | else |
| 907 | return PyFloat_FromDouble(r); |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 908 | } |
| 909 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 910 | #define FUNC1(funcname, func, can_overflow, docstring) \ |
| 911 | static PyObject * math_##funcname(PyObject *self, PyObject *args) { \ |
| 912 | return math_1(args, func, can_overflow); \ |
| 913 | }\ |
| 914 | PyDoc_STRVAR(math_##funcname##_doc, docstring); |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 915 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 916 | #define FUNC1A(funcname, func, docstring) \ |
| 917 | static PyObject * math_##funcname(PyObject *self, PyObject *args) { \ |
| 918 | return math_1a(args, func); \ |
| 919 | }\ |
| 920 | PyDoc_STRVAR(math_##funcname##_doc, docstring); |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 921 | |
Fred Drake | 40c4868 | 2000-07-03 18:11:56 +0000 | [diff] [blame] | 922 | #define FUNC2(funcname, func, docstring) \ |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 923 | static PyObject * math_##funcname(PyObject *self, PyObject *args) { \ |
| 924 | return math_2(args, func, #funcname); \ |
| 925 | }\ |
| 926 | PyDoc_STRVAR(math_##funcname##_doc, docstring); |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 927 | |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 928 | FUNC1(acos, acos, 0, |
Tim Peters | fe71f81 | 2001-08-07 22:10:00 +0000 | [diff] [blame] | 929 | "acos(x)\n\nReturn the arc cosine (measured in radians) of x.") |
Mark Dickinson | f371859 | 2009-12-21 15:27:41 +0000 | [diff] [blame] | 930 | FUNC1(acosh, m_acosh, 0, |
Mark Dickinson | dfe0b23 | 2015-01-11 13:08:05 +0000 | [diff] [blame] | 931 | "acosh(x)\n\nReturn the inverse hyperbolic cosine of x.") |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 932 | FUNC1(asin, asin, 0, |
Tim Peters | fe71f81 | 2001-08-07 22:10:00 +0000 | [diff] [blame] | 933 | "asin(x)\n\nReturn the arc sine (measured in radians) of x.") |
Mark Dickinson | f371859 | 2009-12-21 15:27:41 +0000 | [diff] [blame] | 934 | FUNC1(asinh, m_asinh, 0, |
Mark Dickinson | dfe0b23 | 2015-01-11 13:08:05 +0000 | [diff] [blame] | 935 | "asinh(x)\n\nReturn the inverse hyperbolic sine of x.") |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 936 | FUNC1(atan, atan, 0, |
Tim Peters | fe71f81 | 2001-08-07 22:10:00 +0000 | [diff] [blame] | 937 | "atan(x)\n\nReturn the arc tangent (measured in radians) of x.") |
Christian Heimes | e57950f | 2008-04-21 13:08:03 +0000 | [diff] [blame] | 938 | FUNC2(atan2, m_atan2, |
Tim Peters | fe71f81 | 2001-08-07 22:10:00 +0000 | [diff] [blame] | 939 | "atan2(y, x)\n\nReturn the arc tangent (measured in radians) of y/x.\n" |
| 940 | "Unlike atan(y/x), the signs of both x and y are considered.") |
Mark Dickinson | f371859 | 2009-12-21 15:27:41 +0000 | [diff] [blame] | 941 | FUNC1(atanh, m_atanh, 0, |
Mark Dickinson | dfe0b23 | 2015-01-11 13:08:05 +0000 | [diff] [blame] | 942 | "atanh(x)\n\nReturn the inverse hyperbolic tangent of x.") |
Guido van Rossum | 13e05de | 2007-08-23 22:56:55 +0000 | [diff] [blame] | 943 | |
| 944 | static PyObject * math_ceil(PyObject *self, PyObject *number) { |
Benjamin Peterson | ce79852 | 2012-01-22 11:24:29 -0500 | [diff] [blame] | 945 | _Py_IDENTIFIER(__ceil__); |
Mark Dickinson | 6d02d9c | 2010-07-02 16:05:15 +0000 | [diff] [blame] | 946 | PyObject *method, *result; |
Guido van Rossum | 13e05de | 2007-08-23 22:56:55 +0000 | [diff] [blame] | 947 | |
Benjamin Peterson | ce79852 | 2012-01-22 11:24:29 -0500 | [diff] [blame] | 948 | method = _PyObject_LookupSpecial(number, &PyId___ceil__); |
Benjamin Peterson | f751bc9 | 2010-07-02 13:46:42 +0000 | [diff] [blame] | 949 | if (method == NULL) { |
| 950 | if (PyErr_Occurred()) |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 951 | return NULL; |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 952 | return math_1_to_int(number, ceil, 0); |
Benjamin Peterson | f751bc9 | 2010-07-02 13:46:42 +0000 | [diff] [blame] | 953 | } |
Mark Dickinson | 6d02d9c | 2010-07-02 16:05:15 +0000 | [diff] [blame] | 954 | result = PyObject_CallFunctionObjArgs(method, NULL); |
| 955 | Py_DECREF(method); |
| 956 | return result; |
Guido van Rossum | 13e05de | 2007-08-23 22:56:55 +0000 | [diff] [blame] | 957 | } |
| 958 | |
| 959 | PyDoc_STRVAR(math_ceil_doc, |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 960 | "ceil(x)\n\nReturn the ceiling of x as an int.\n" |
| 961 | "This is the smallest integral value >= x."); |
Guido van Rossum | 13e05de | 2007-08-23 22:56:55 +0000 | [diff] [blame] | 962 | |
Christian Heimes | 072c0f1 | 2008-01-03 23:01:04 +0000 | [diff] [blame] | 963 | FUNC2(copysign, copysign, |
Andrew Kuchling | 8cb1ec3 | 2014-02-16 11:11:25 -0500 | [diff] [blame] | 964 | "copysign(x, y)\n\nReturn a float with the magnitude (absolute value) " |
| 965 | "of x but the sign \nof y. On platforms that support signed zeros, " |
Andrew Kuchling | 3137885 | 2014-02-16 12:09:35 -0500 | [diff] [blame] | 966 | "copysign(1.0, -0.0) \nreturns -1.0.\n") |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 967 | FUNC1(cos, cos, 0, |
| 968 | "cos(x)\n\nReturn the cosine of x (measured in radians).") |
| 969 | FUNC1(cosh, cosh, 1, |
| 970 | "cosh(x)\n\nReturn the hyperbolic cosine of x.") |
Mark Dickinson | 45f992a | 2009-12-19 11:20:49 +0000 | [diff] [blame] | 971 | FUNC1A(erf, m_erf, |
| 972 | "erf(x)\n\nError function at x.") |
| 973 | FUNC1A(erfc, m_erfc, |
| 974 | "erfc(x)\n\nComplementary error function at x.") |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 975 | FUNC1(exp, exp, 1, |
Guido van Rossum | c6e2290 | 1998-12-04 19:26:43 +0000 | [diff] [blame] | 976 | "exp(x)\n\nReturn e raised to the power of x.") |
Mark Dickinson | 664b511 | 2009-12-16 20:23:42 +0000 | [diff] [blame] | 977 | FUNC1(expm1, m_expm1, 1, |
| 978 | "expm1(x)\n\nReturn exp(x)-1.\n" |
| 979 | "This function avoids the loss of precision involved in the direct " |
| 980 | "evaluation of exp(x)-1 for small x.") |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 981 | FUNC1(fabs, fabs, 0, |
Tim Peters | fe71f81 | 2001-08-07 22:10:00 +0000 | [diff] [blame] | 982 | "fabs(x)\n\nReturn the absolute value of the float x.") |
Guido van Rossum | 13e05de | 2007-08-23 22:56:55 +0000 | [diff] [blame] | 983 | |
| 984 | static PyObject * math_floor(PyObject *self, PyObject *number) { |
Benjamin Peterson | ce79852 | 2012-01-22 11:24:29 -0500 | [diff] [blame] | 985 | _Py_IDENTIFIER(__floor__); |
Benjamin Peterson | b012589 | 2010-07-02 13:35:17 +0000 | [diff] [blame] | 986 | PyObject *method, *result; |
Guido van Rossum | 13e05de | 2007-08-23 22:56:55 +0000 | [diff] [blame] | 987 | |
Benjamin Peterson | ce79852 | 2012-01-22 11:24:29 -0500 | [diff] [blame] | 988 | method = _PyObject_LookupSpecial(number, &PyId___floor__); |
Benjamin Peterson | 8bb9cde | 2010-07-01 15:16:55 +0000 | [diff] [blame] | 989 | if (method == NULL) { |
| 990 | if (PyErr_Occurred()) |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 991 | return NULL; |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 992 | return math_1_to_int(number, floor, 0); |
Benjamin Peterson | 8bb9cde | 2010-07-01 15:16:55 +0000 | [diff] [blame] | 993 | } |
Benjamin Peterson | b012589 | 2010-07-02 13:35:17 +0000 | [diff] [blame] | 994 | result = PyObject_CallFunctionObjArgs(method, NULL); |
| 995 | Py_DECREF(method); |
| 996 | return result; |
Guido van Rossum | 13e05de | 2007-08-23 22:56:55 +0000 | [diff] [blame] | 997 | } |
| 998 | |
| 999 | PyDoc_STRVAR(math_floor_doc, |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1000 | "floor(x)\n\nReturn the floor of x as an int.\n" |
| 1001 | "This is the largest integral value <= x."); |
Guido van Rossum | 13e05de | 2007-08-23 22:56:55 +0000 | [diff] [blame] | 1002 | |
Mark Dickinson | 12c4bdb | 2009-09-28 19:21:11 +0000 | [diff] [blame] | 1003 | FUNC1A(gamma, m_tgamma, |
| 1004 | "gamma(x)\n\nGamma function at x.") |
Mark Dickinson | 05d2e08 | 2009-12-11 20:17:17 +0000 | [diff] [blame] | 1005 | FUNC1A(lgamma, m_lgamma, |
| 1006 | "lgamma(x)\n\nNatural logarithm of absolute value of Gamma function at x.") |
Mark Dickinson | be64d95 | 2010-07-07 16:21:29 +0000 | [diff] [blame] | 1007 | FUNC1(log1p, m_log1p, 0, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1008 | "log1p(x)\n\nReturn the natural logarithm of 1+x (base e).\n" |
| 1009 | "The result is computed in a way which is accurate for x near zero.") |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1010 | FUNC1(sin, sin, 0, |
Tim Peters | fe71f81 | 2001-08-07 22:10:00 +0000 | [diff] [blame] | 1011 | "sin(x)\n\nReturn the sine of x (measured in radians).") |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1012 | FUNC1(sinh, sinh, 1, |
Guido van Rossum | c6e2290 | 1998-12-04 19:26:43 +0000 | [diff] [blame] | 1013 | "sinh(x)\n\nReturn the hyperbolic sine of x.") |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1014 | FUNC1(sqrt, sqrt, 0, |
Guido van Rossum | c6e2290 | 1998-12-04 19:26:43 +0000 | [diff] [blame] | 1015 | "sqrt(x)\n\nReturn the square root of x.") |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1016 | FUNC1(tan, tan, 0, |
Tim Peters | fe71f81 | 2001-08-07 22:10:00 +0000 | [diff] [blame] | 1017 | "tan(x)\n\nReturn the tangent of x (measured in radians).") |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1018 | FUNC1(tanh, tanh, 0, |
Guido van Rossum | c6e2290 | 1998-12-04 19:26:43 +0000 | [diff] [blame] | 1019 | "tanh(x)\n\nReturn the hyperbolic tangent of x.") |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 1020 | |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1021 | /* Precision summation function as msum() by Raymond Hettinger in |
| 1022 | <http://aspn.activestate.com/ASPN/Cookbook/Python/Recipe/393090>, |
| 1023 | enhanced with the exact partials sum and roundoff from Mark |
| 1024 | Dickinson's post at <http://bugs.python.org/file10357/msum4.py>. |
| 1025 | See those links for more details, proofs and other references. |
| 1026 | |
| 1027 | Note 1: IEEE 754R floating point semantics are assumed, |
| 1028 | but the current implementation does not re-establish special |
| 1029 | value semantics across iterations (i.e. handling -Inf + Inf). |
| 1030 | |
| 1031 | Note 2: No provision is made for intermediate overflow handling; |
Georg Brandl | f78e02b | 2008-06-10 17:40:04 +0000 | [diff] [blame] | 1032 | therefore, sum([1e+308, 1e-308, 1e+308]) returns 1e+308 while |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1033 | sum([1e+308, 1e+308, 1e-308]) raises an OverflowError due to the |
| 1034 | overflow of the first partial sum. |
| 1035 | |
Benjamin Peterson | fea6a94 | 2008-07-02 16:11:42 +0000 | [diff] [blame] | 1036 | Note 3: The intermediate values lo, yr, and hi are declared volatile so |
| 1037 | aggressive compilers won't algebraically reduce lo to always be exactly 0.0. |
Georg Brandl | f78e02b | 2008-06-10 17:40:04 +0000 | [diff] [blame] | 1038 | Also, the volatile declaration forces the values to be stored in memory as |
| 1039 | regular doubles instead of extended long precision (80-bit) values. This |
Benjamin Peterson | fea6a94 | 2008-07-02 16:11:42 +0000 | [diff] [blame] | 1040 | prevents double rounding because any addition or subtraction of two doubles |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1041 | can be resolved exactly into double-sized hi and lo values. As long as the |
Georg Brandl | f78e02b | 2008-06-10 17:40:04 +0000 | [diff] [blame] | 1042 | hi value gets forced into a double before yr and lo are computed, the extra |
| 1043 | bits in downstream extended precision operations (x87 for example) will be |
| 1044 | exactly zero and therefore can be losslessly stored back into a double, |
| 1045 | thereby preventing double rounding. |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1046 | |
| 1047 | Note 4: A similar implementation is in Modules/cmathmodule.c. |
| 1048 | Be sure to update both when making changes. |
| 1049 | |
Serhiy Storchaka | a60c2fe | 2015-03-12 21:56:08 +0200 | [diff] [blame] | 1050 | Note 5: The signature of math.fsum() differs from builtins.sum() |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1051 | because the start argument doesn't make sense in the context of |
| 1052 | accurate summation. Since the partials table is collapsed before |
| 1053 | returning a result, sum(seq2, start=sum(seq1)) may not equal the |
| 1054 | accurate result returned by sum(itertools.chain(seq1, seq2)). |
| 1055 | */ |
| 1056 | |
| 1057 | #define NUM_PARTIALS 32 /* initial partials array size, on stack */ |
| 1058 | |
| 1059 | /* Extend the partials array p[] by doubling its size. */ |
| 1060 | static int /* non-zero on error */ |
Mark Dickinson | aa7633a | 2008-08-01 08:16:13 +0000 | [diff] [blame] | 1061 | _fsum_realloc(double **p_ptr, Py_ssize_t n, |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1062 | double *ps, Py_ssize_t *m_ptr) |
| 1063 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1064 | void *v = NULL; |
| 1065 | Py_ssize_t m = *m_ptr; |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1066 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1067 | m += m; /* double */ |
Victor Stinner | 049e509 | 2014-08-17 22:20:00 +0200 | [diff] [blame] | 1068 | if (n < m && (size_t)m < ((size_t)PY_SSIZE_T_MAX / sizeof(double))) { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1069 | double *p = *p_ptr; |
| 1070 | if (p == ps) { |
| 1071 | v = PyMem_Malloc(sizeof(double) * m); |
| 1072 | if (v != NULL) |
| 1073 | memcpy(v, ps, sizeof(double) * n); |
| 1074 | } |
| 1075 | else |
| 1076 | v = PyMem_Realloc(p, sizeof(double) * m); |
| 1077 | } |
| 1078 | if (v == NULL) { /* size overflow or no memory */ |
| 1079 | PyErr_SetString(PyExc_MemoryError, "math.fsum partials"); |
| 1080 | return 1; |
| 1081 | } |
| 1082 | *p_ptr = (double*) v; |
| 1083 | *m_ptr = m; |
| 1084 | return 0; |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1085 | } |
| 1086 | |
| 1087 | /* Full precision summation of a sequence of floats. |
| 1088 | |
| 1089 | def msum(iterable): |
| 1090 | partials = [] # sorted, non-overlapping partial sums |
| 1091 | for x in iterable: |
Mark Dickinson | fdb0acc | 2010-06-25 20:22:24 +0000 | [diff] [blame] | 1092 | i = 0 |
| 1093 | for y in partials: |
| 1094 | if abs(x) < abs(y): |
| 1095 | x, y = y, x |
| 1096 | hi = x + y |
| 1097 | lo = y - (hi - x) |
| 1098 | if lo: |
| 1099 | partials[i] = lo |
| 1100 | i += 1 |
| 1101 | x = hi |
| 1102 | partials[i:] = [x] |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1103 | return sum_exact(partials) |
| 1104 | |
| 1105 | Rounded x+y stored in hi with the roundoff stored in lo. Together hi+lo |
| 1106 | are exactly equal to x+y. The inner loop applies hi/lo summation to each |
| 1107 | partial so that the list of partial sums remains exact. |
| 1108 | |
| 1109 | Sum_exact() adds the partial sums exactly and correctly rounds the final |
| 1110 | result (using the round-half-to-even rule). The items in partials remain |
| 1111 | non-zero, non-special, non-overlapping and strictly increasing in |
| 1112 | magnitude, but possibly not all having the same sign. |
| 1113 | |
| 1114 | Depends on IEEE 754 arithmetic guarantees and half-even rounding. |
| 1115 | */ |
| 1116 | |
| 1117 | static PyObject* |
Mark Dickinson | aa7633a | 2008-08-01 08:16:13 +0000 | [diff] [blame] | 1118 | math_fsum(PyObject *self, PyObject *seq) |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1119 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1120 | PyObject *item, *iter, *sum = NULL; |
| 1121 | Py_ssize_t i, j, n = 0, m = NUM_PARTIALS; |
| 1122 | double x, y, t, ps[NUM_PARTIALS], *p = ps; |
| 1123 | double xsave, special_sum = 0.0, inf_sum = 0.0; |
| 1124 | volatile double hi, yr, lo; |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1125 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1126 | iter = PyObject_GetIter(seq); |
| 1127 | if (iter == NULL) |
| 1128 | return NULL; |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1129 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1130 | PyFPE_START_PROTECT("fsum", Py_DECREF(iter); return NULL) |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1131 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1132 | for(;;) { /* for x in iterable */ |
| 1133 | assert(0 <= n && n <= m); |
| 1134 | assert((m == NUM_PARTIALS && p == ps) || |
| 1135 | (m > NUM_PARTIALS && p != NULL)); |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1136 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1137 | item = PyIter_Next(iter); |
| 1138 | if (item == NULL) { |
| 1139 | if (PyErr_Occurred()) |
| 1140 | goto _fsum_error; |
| 1141 | break; |
| 1142 | } |
| 1143 | x = PyFloat_AsDouble(item); |
| 1144 | Py_DECREF(item); |
| 1145 | if (PyErr_Occurred()) |
| 1146 | goto _fsum_error; |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1147 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1148 | xsave = x; |
| 1149 | for (i = j = 0; j < n; j++) { /* for y in partials */ |
| 1150 | y = p[j]; |
| 1151 | if (fabs(x) < fabs(y)) { |
| 1152 | t = x; x = y; y = t; |
| 1153 | } |
| 1154 | hi = x + y; |
| 1155 | yr = hi - x; |
| 1156 | lo = y - yr; |
| 1157 | if (lo != 0.0) |
| 1158 | p[i++] = lo; |
| 1159 | x = hi; |
| 1160 | } |
Mark Dickinson | aa7633a | 2008-08-01 08:16:13 +0000 | [diff] [blame] | 1161 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1162 | n = i; /* ps[i:] = [x] */ |
| 1163 | if (x != 0.0) { |
| 1164 | if (! Py_IS_FINITE(x)) { |
| 1165 | /* a nonfinite x could arise either as |
| 1166 | a result of intermediate overflow, or |
| 1167 | as a result of a nan or inf in the |
| 1168 | summands */ |
| 1169 | if (Py_IS_FINITE(xsave)) { |
| 1170 | PyErr_SetString(PyExc_OverflowError, |
| 1171 | "intermediate overflow in fsum"); |
| 1172 | goto _fsum_error; |
| 1173 | } |
| 1174 | if (Py_IS_INFINITY(xsave)) |
| 1175 | inf_sum += xsave; |
| 1176 | special_sum += xsave; |
| 1177 | /* reset partials */ |
| 1178 | n = 0; |
| 1179 | } |
| 1180 | else if (n >= m && _fsum_realloc(&p, n, ps, &m)) |
| 1181 | goto _fsum_error; |
| 1182 | else |
| 1183 | p[n++] = x; |
| 1184 | } |
| 1185 | } |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1186 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1187 | if (special_sum != 0.0) { |
| 1188 | if (Py_IS_NAN(inf_sum)) |
| 1189 | PyErr_SetString(PyExc_ValueError, |
| 1190 | "-inf + inf in fsum"); |
| 1191 | else |
| 1192 | sum = PyFloat_FromDouble(special_sum); |
| 1193 | goto _fsum_error; |
| 1194 | } |
Mark Dickinson | aa7633a | 2008-08-01 08:16:13 +0000 | [diff] [blame] | 1195 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1196 | hi = 0.0; |
| 1197 | if (n > 0) { |
| 1198 | hi = p[--n]; |
| 1199 | /* sum_exact(ps, hi) from the top, stop when the sum becomes |
| 1200 | inexact. */ |
| 1201 | while (n > 0) { |
| 1202 | x = hi; |
| 1203 | y = p[--n]; |
| 1204 | assert(fabs(y) < fabs(x)); |
| 1205 | hi = x + y; |
| 1206 | yr = hi - x; |
| 1207 | lo = y - yr; |
| 1208 | if (lo != 0.0) |
| 1209 | break; |
| 1210 | } |
| 1211 | /* Make half-even rounding work across multiple partials. |
| 1212 | Needed so that sum([1e-16, 1, 1e16]) will round-up the last |
| 1213 | digit to two instead of down to zero (the 1e-16 makes the 1 |
| 1214 | slightly closer to two). With a potential 1 ULP rounding |
| 1215 | error fixed-up, math.fsum() can guarantee commutativity. */ |
| 1216 | if (n > 0 && ((lo < 0.0 && p[n-1] < 0.0) || |
| 1217 | (lo > 0.0 && p[n-1] > 0.0))) { |
| 1218 | y = lo * 2.0; |
| 1219 | x = hi + y; |
| 1220 | yr = x - hi; |
| 1221 | if (y == yr) |
| 1222 | hi = x; |
| 1223 | } |
| 1224 | } |
| 1225 | sum = PyFloat_FromDouble(hi); |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1226 | |
Mark Dickinson | aa7633a | 2008-08-01 08:16:13 +0000 | [diff] [blame] | 1227 | _fsum_error: |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1228 | PyFPE_END_PROTECT(hi) |
| 1229 | Py_DECREF(iter); |
| 1230 | if (p != ps) |
| 1231 | PyMem_Free(p); |
| 1232 | return sum; |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1233 | } |
| 1234 | |
| 1235 | #undef NUM_PARTIALS |
| 1236 | |
Mark Dickinson | aa7633a | 2008-08-01 08:16:13 +0000 | [diff] [blame] | 1237 | PyDoc_STRVAR(math_fsum_doc, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1238 | "fsum(iterable)\n\n\ |
Benjamin Peterson | 2b7411d | 2008-05-26 17:36:47 +0000 | [diff] [blame] | 1239 | Return an accurate floating point sum of values in the iterable.\n\ |
| 1240 | Assumes IEEE-754 floating point arithmetic."); |
| 1241 | |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1242 | /* Return the smallest integer k such that n < 2**k, or 0 if n == 0. |
| 1243 | * Equivalent to floor(lg(x))+1. Also equivalent to: bitwidth_of_type - |
| 1244 | * count_leading_zero_bits(x) |
| 1245 | */ |
| 1246 | |
| 1247 | /* XXX: This routine does more or less the same thing as |
| 1248 | * bits_in_digit() in Objects/longobject.c. Someday it would be nice to |
| 1249 | * consolidate them. On BSD, there's a library function called fls() |
| 1250 | * that we could use, and GCC provides __builtin_clz(). |
| 1251 | */ |
| 1252 | |
| 1253 | static unsigned long |
| 1254 | bit_length(unsigned long n) |
| 1255 | { |
| 1256 | unsigned long len = 0; |
| 1257 | while (n != 0) { |
| 1258 | ++len; |
| 1259 | n >>= 1; |
| 1260 | } |
| 1261 | return len; |
| 1262 | } |
| 1263 | |
| 1264 | static unsigned long |
| 1265 | count_set_bits(unsigned long n) |
| 1266 | { |
| 1267 | unsigned long count = 0; |
| 1268 | while (n != 0) { |
| 1269 | ++count; |
| 1270 | n &= n - 1; /* clear least significant bit */ |
| 1271 | } |
| 1272 | return count; |
| 1273 | } |
| 1274 | |
| 1275 | /* Divide-and-conquer factorial algorithm |
| 1276 | * |
| 1277 | * Based on the formula and psuedo-code provided at: |
| 1278 | * http://www.luschny.de/math/factorial/binarysplitfact.html |
| 1279 | * |
| 1280 | * Faster algorithms exist, but they're more complicated and depend on |
Ezio Melotti | 9527afd | 2010-07-08 15:03:02 +0000 | [diff] [blame] | 1281 | * a fast prime factorization algorithm. |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1282 | * |
| 1283 | * Notes on the algorithm |
| 1284 | * ---------------------- |
| 1285 | * |
| 1286 | * factorial(n) is written in the form 2**k * m, with m odd. k and m are |
| 1287 | * computed separately, and then combined using a left shift. |
| 1288 | * |
| 1289 | * The function factorial_odd_part computes the odd part m (i.e., the greatest |
| 1290 | * odd divisor) of factorial(n), using the formula: |
| 1291 | * |
| 1292 | * factorial_odd_part(n) = |
| 1293 | * |
| 1294 | * product_{i >= 0} product_{0 < j <= n / 2**i, j odd} j |
| 1295 | * |
| 1296 | * Example: factorial_odd_part(20) = |
| 1297 | * |
| 1298 | * (1) * |
| 1299 | * (1) * |
| 1300 | * (1 * 3 * 5) * |
| 1301 | * (1 * 3 * 5 * 7 * 9) |
| 1302 | * (1 * 3 * 5 * 7 * 9 * 11 * 13 * 15 * 17 * 19) |
| 1303 | * |
| 1304 | * Here i goes from large to small: the first term corresponds to i=4 (any |
| 1305 | * larger i gives an empty product), and the last term corresponds to i=0. |
| 1306 | * Each term can be computed from the last by multiplying by the extra odd |
| 1307 | * numbers required: e.g., to get from the penultimate term to the last one, |
| 1308 | * we multiply by (11 * 13 * 15 * 17 * 19). |
| 1309 | * |
| 1310 | * To see a hint of why this formula works, here are the same numbers as above |
| 1311 | * but with the even parts (i.e., the appropriate powers of 2) included. For |
| 1312 | * each subterm in the product for i, we multiply that subterm by 2**i: |
| 1313 | * |
| 1314 | * factorial(20) = |
| 1315 | * |
| 1316 | * (16) * |
| 1317 | * (8) * |
| 1318 | * (4 * 12 * 20) * |
| 1319 | * (2 * 6 * 10 * 14 * 18) * |
| 1320 | * (1 * 3 * 5 * 7 * 9 * 11 * 13 * 15 * 17 * 19) |
| 1321 | * |
| 1322 | * The factorial_partial_product function computes the product of all odd j in |
| 1323 | * range(start, stop) for given start and stop. It's used to compute the |
| 1324 | * partial products like (11 * 13 * 15 * 17 * 19) in the example above. It |
| 1325 | * operates recursively, repeatedly splitting the range into two roughly equal |
| 1326 | * pieces until the subranges are small enough to be computed using only C |
| 1327 | * integer arithmetic. |
| 1328 | * |
| 1329 | * The two-valuation k (i.e., the exponent of the largest power of 2 dividing |
| 1330 | * the factorial) is computed independently in the main math_factorial |
| 1331 | * function. By standard results, its value is: |
| 1332 | * |
| 1333 | * two_valuation = n//2 + n//4 + n//8 + .... |
| 1334 | * |
| 1335 | * It can be shown (e.g., by complete induction on n) that two_valuation is |
| 1336 | * equal to n - count_set_bits(n), where count_set_bits(n) gives the number of |
| 1337 | * '1'-bits in the binary expansion of n. |
| 1338 | */ |
| 1339 | |
| 1340 | /* factorial_partial_product: Compute product(range(start, stop, 2)) using |
| 1341 | * divide and conquer. Assumes start and stop are odd and stop > start. |
| 1342 | * max_bits must be >= bit_length(stop - 2). */ |
| 1343 | |
| 1344 | static PyObject * |
| 1345 | factorial_partial_product(unsigned long start, unsigned long stop, |
| 1346 | unsigned long max_bits) |
| 1347 | { |
| 1348 | unsigned long midpoint, num_operands; |
| 1349 | PyObject *left = NULL, *right = NULL, *result = NULL; |
| 1350 | |
| 1351 | /* If the return value will fit an unsigned long, then we can |
| 1352 | * multiply in a tight, fast loop where each multiply is O(1). |
| 1353 | * Compute an upper bound on the number of bits required to store |
| 1354 | * the answer. |
| 1355 | * |
| 1356 | * Storing some integer z requires floor(lg(z))+1 bits, which is |
| 1357 | * conveniently the value returned by bit_length(z). The |
| 1358 | * product x*y will require at most |
| 1359 | * bit_length(x) + bit_length(y) bits to store, based |
| 1360 | * on the idea that lg product = lg x + lg y. |
| 1361 | * |
| 1362 | * We know that stop - 2 is the largest number to be multiplied. From |
| 1363 | * there, we have: bit_length(answer) <= num_operands * |
| 1364 | * bit_length(stop - 2) |
| 1365 | */ |
| 1366 | |
| 1367 | num_operands = (stop - start) / 2; |
| 1368 | /* The "num_operands <= 8 * SIZEOF_LONG" check guards against the |
| 1369 | * unlikely case of an overflow in num_operands * max_bits. */ |
| 1370 | if (num_operands <= 8 * SIZEOF_LONG && |
| 1371 | num_operands * max_bits <= 8 * SIZEOF_LONG) { |
| 1372 | unsigned long j, total; |
| 1373 | for (total = start, j = start + 2; j < stop; j += 2) |
| 1374 | total *= j; |
| 1375 | return PyLong_FromUnsignedLong(total); |
| 1376 | } |
| 1377 | |
| 1378 | /* find midpoint of range(start, stop), rounded up to next odd number. */ |
| 1379 | midpoint = (start + num_operands) | 1; |
| 1380 | left = factorial_partial_product(start, midpoint, |
| 1381 | bit_length(midpoint - 2)); |
| 1382 | if (left == NULL) |
| 1383 | goto error; |
| 1384 | right = factorial_partial_product(midpoint, stop, max_bits); |
| 1385 | if (right == NULL) |
| 1386 | goto error; |
| 1387 | result = PyNumber_Multiply(left, right); |
| 1388 | |
| 1389 | error: |
| 1390 | Py_XDECREF(left); |
| 1391 | Py_XDECREF(right); |
| 1392 | return result; |
| 1393 | } |
| 1394 | |
| 1395 | /* factorial_odd_part: compute the odd part of factorial(n). */ |
| 1396 | |
| 1397 | static PyObject * |
| 1398 | factorial_odd_part(unsigned long n) |
| 1399 | { |
| 1400 | long i; |
| 1401 | unsigned long v, lower, upper; |
| 1402 | PyObject *partial, *tmp, *inner, *outer; |
| 1403 | |
| 1404 | inner = PyLong_FromLong(1); |
| 1405 | if (inner == NULL) |
| 1406 | return NULL; |
| 1407 | outer = inner; |
| 1408 | Py_INCREF(outer); |
| 1409 | |
| 1410 | upper = 3; |
| 1411 | for (i = bit_length(n) - 2; i >= 0; i--) { |
| 1412 | v = n >> i; |
| 1413 | if (v <= 2) |
| 1414 | continue; |
| 1415 | lower = upper; |
| 1416 | /* (v + 1) | 1 = least odd integer strictly larger than n / 2**i */ |
| 1417 | upper = (v + 1) | 1; |
| 1418 | /* Here inner is the product of all odd integers j in the range (0, |
| 1419 | n/2**(i+1)]. The factorial_partial_product call below gives the |
| 1420 | product of all odd integers j in the range (n/2**(i+1), n/2**i]. */ |
| 1421 | partial = factorial_partial_product(lower, upper, bit_length(upper-2)); |
| 1422 | /* inner *= partial */ |
| 1423 | if (partial == NULL) |
| 1424 | goto error; |
| 1425 | tmp = PyNumber_Multiply(inner, partial); |
| 1426 | Py_DECREF(partial); |
| 1427 | if (tmp == NULL) |
| 1428 | goto error; |
| 1429 | Py_DECREF(inner); |
| 1430 | inner = tmp; |
| 1431 | /* Now inner is the product of all odd integers j in the range (0, |
| 1432 | n/2**i], giving the inner product in the formula above. */ |
| 1433 | |
| 1434 | /* outer *= inner; */ |
| 1435 | tmp = PyNumber_Multiply(outer, inner); |
| 1436 | if (tmp == NULL) |
| 1437 | goto error; |
| 1438 | Py_DECREF(outer); |
| 1439 | outer = tmp; |
| 1440 | } |
Mark Dickinson | 7646449 | 2012-10-25 10:46:28 +0100 | [diff] [blame] | 1441 | Py_DECREF(inner); |
| 1442 | return outer; |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1443 | |
| 1444 | error: |
| 1445 | Py_DECREF(outer); |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1446 | Py_DECREF(inner); |
Mark Dickinson | 7646449 | 2012-10-25 10:46:28 +0100 | [diff] [blame] | 1447 | return NULL; |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1448 | } |
| 1449 | |
| 1450 | /* Lookup table for small factorial values */ |
| 1451 | |
| 1452 | static const unsigned long SmallFactorials[] = { |
| 1453 | 1, 1, 2, 6, 24, 120, 720, 5040, 40320, |
| 1454 | 362880, 3628800, 39916800, 479001600, |
| 1455 | #if SIZEOF_LONG >= 8 |
| 1456 | 6227020800, 87178291200, 1307674368000, |
| 1457 | 20922789888000, 355687428096000, 6402373705728000, |
| 1458 | 121645100408832000, 2432902008176640000 |
| 1459 | #endif |
| 1460 | }; |
| 1461 | |
Barry Warsaw | 8b43b19 | 1996-12-09 22:32:36 +0000 | [diff] [blame] | 1462 | static PyObject * |
Georg Brandl | c28e1fa | 2008-06-10 19:20:26 +0000 | [diff] [blame] | 1463 | math_factorial(PyObject *self, PyObject *arg) |
| 1464 | { |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1465 | long x; |
Mark Dickinson | 5990d28 | 2014-04-10 09:29:39 -0400 | [diff] [blame] | 1466 | int overflow; |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1467 | PyObject *result, *odd_part, *two_valuation; |
Georg Brandl | c28e1fa | 2008-06-10 19:20:26 +0000 | [diff] [blame] | 1468 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1469 | if (PyFloat_Check(arg)) { |
| 1470 | PyObject *lx; |
| 1471 | double dx = PyFloat_AS_DOUBLE((PyFloatObject *)arg); |
| 1472 | if (!(Py_IS_FINITE(dx) && dx == floor(dx))) { |
| 1473 | PyErr_SetString(PyExc_ValueError, |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1474 | "factorial() only accepts integral values"); |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1475 | return NULL; |
| 1476 | } |
| 1477 | lx = PyLong_FromDouble(dx); |
| 1478 | if (lx == NULL) |
| 1479 | return NULL; |
Mark Dickinson | 5990d28 | 2014-04-10 09:29:39 -0400 | [diff] [blame] | 1480 | x = PyLong_AsLongAndOverflow(lx, &overflow); |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1481 | Py_DECREF(lx); |
| 1482 | } |
| 1483 | else |
Mark Dickinson | 5990d28 | 2014-04-10 09:29:39 -0400 | [diff] [blame] | 1484 | x = PyLong_AsLongAndOverflow(arg, &overflow); |
Georg Brandl | c28e1fa | 2008-06-10 19:20:26 +0000 | [diff] [blame] | 1485 | |
Mark Dickinson | 5990d28 | 2014-04-10 09:29:39 -0400 | [diff] [blame] | 1486 | if (x == -1 && PyErr_Occurred()) { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1487 | return NULL; |
Mark Dickinson | 5990d28 | 2014-04-10 09:29:39 -0400 | [diff] [blame] | 1488 | } |
| 1489 | else if (overflow == 1) { |
| 1490 | PyErr_Format(PyExc_OverflowError, |
| 1491 | "factorial() argument should not exceed %ld", |
| 1492 | LONG_MAX); |
| 1493 | return NULL; |
| 1494 | } |
| 1495 | else if (overflow == -1 || x < 0) { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1496 | PyErr_SetString(PyExc_ValueError, |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1497 | "factorial() not defined for negative values"); |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1498 | return NULL; |
| 1499 | } |
Georg Brandl | c28e1fa | 2008-06-10 19:20:26 +0000 | [diff] [blame] | 1500 | |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1501 | /* use lookup table if x is small */ |
Victor Stinner | 6394188 | 2011-09-29 00:42:28 +0200 | [diff] [blame] | 1502 | if (x < (long)Py_ARRAY_LENGTH(SmallFactorials)) |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1503 | return PyLong_FromUnsignedLong(SmallFactorials[x]); |
| 1504 | |
| 1505 | /* else express in the form odd_part * 2**two_valuation, and compute as |
| 1506 | odd_part << two_valuation. */ |
| 1507 | odd_part = factorial_odd_part(x); |
| 1508 | if (odd_part == NULL) |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1509 | return NULL; |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1510 | two_valuation = PyLong_FromLong(x - count_set_bits(x)); |
| 1511 | if (two_valuation == NULL) { |
| 1512 | Py_DECREF(odd_part); |
| 1513 | return NULL; |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1514 | } |
Mark Dickinson | 4c8a9a2 | 2010-05-15 17:02:38 +0000 | [diff] [blame] | 1515 | result = PyNumber_Lshift(odd_part, two_valuation); |
| 1516 | Py_DECREF(two_valuation); |
| 1517 | Py_DECREF(odd_part); |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1518 | return result; |
Georg Brandl | c28e1fa | 2008-06-10 19:20:26 +0000 | [diff] [blame] | 1519 | } |
| 1520 | |
Benjamin Peterson | 6ebe78f | 2008-12-21 00:06:59 +0000 | [diff] [blame] | 1521 | PyDoc_STRVAR(math_factorial_doc, |
| 1522 | "factorial(x) -> Integral\n" |
| 1523 | "\n" |
| 1524 | "Find x!. Raise a ValueError if x is negative or non-integral."); |
Georg Brandl | c28e1fa | 2008-06-10 19:20:26 +0000 | [diff] [blame] | 1525 | |
| 1526 | static PyObject * |
Christian Heimes | 400adb0 | 2008-02-01 08:12:03 +0000 | [diff] [blame] | 1527 | math_trunc(PyObject *self, PyObject *number) |
| 1528 | { |
Benjamin Peterson | ce79852 | 2012-01-22 11:24:29 -0500 | [diff] [blame] | 1529 | _Py_IDENTIFIER(__trunc__); |
Benjamin Peterson | b012589 | 2010-07-02 13:35:17 +0000 | [diff] [blame] | 1530 | PyObject *trunc, *result; |
Christian Heimes | 400adb0 | 2008-02-01 08:12:03 +0000 | [diff] [blame] | 1531 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1532 | if (Py_TYPE(number)->tp_dict == NULL) { |
| 1533 | if (PyType_Ready(Py_TYPE(number)) < 0) |
| 1534 | return NULL; |
| 1535 | } |
Christian Heimes | 400adb0 | 2008-02-01 08:12:03 +0000 | [diff] [blame] | 1536 | |
Benjamin Peterson | ce79852 | 2012-01-22 11:24:29 -0500 | [diff] [blame] | 1537 | trunc = _PyObject_LookupSpecial(number, &PyId___trunc__); |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1538 | if (trunc == NULL) { |
Benjamin Peterson | 8bb9cde | 2010-07-01 15:16:55 +0000 | [diff] [blame] | 1539 | if (!PyErr_Occurred()) |
| 1540 | PyErr_Format(PyExc_TypeError, |
| 1541 | "type %.100s doesn't define __trunc__ method", |
| 1542 | Py_TYPE(number)->tp_name); |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1543 | return NULL; |
| 1544 | } |
Benjamin Peterson | b012589 | 2010-07-02 13:35:17 +0000 | [diff] [blame] | 1545 | result = PyObject_CallFunctionObjArgs(trunc, NULL); |
| 1546 | Py_DECREF(trunc); |
| 1547 | return result; |
Christian Heimes | 400adb0 | 2008-02-01 08:12:03 +0000 | [diff] [blame] | 1548 | } |
| 1549 | |
| 1550 | PyDoc_STRVAR(math_trunc_doc, |
| 1551 | "trunc(x:Real) -> Integral\n" |
| 1552 | "\n" |
Christian Heimes | 292d351 | 2008-02-03 16:51:08 +0000 | [diff] [blame] | 1553 | "Truncates x to the nearest Integral toward 0. Uses the __trunc__ magic method."); |
Christian Heimes | 400adb0 | 2008-02-01 08:12:03 +0000 | [diff] [blame] | 1554 | |
| 1555 | static PyObject * |
Thomas Wouters | 89f507f | 2006-12-13 04:49:30 +0000 | [diff] [blame] | 1556 | math_frexp(PyObject *self, PyObject *arg) |
Guido van Rossum | d18ad58 | 1991-10-24 14:57:21 +0000 | [diff] [blame] | 1557 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1558 | int i; |
| 1559 | double x = PyFloat_AsDouble(arg); |
| 1560 | if (x == -1.0 && PyErr_Occurred()) |
| 1561 | return NULL; |
| 1562 | /* deal with special cases directly, to sidestep platform |
| 1563 | differences */ |
| 1564 | if (Py_IS_NAN(x) || Py_IS_INFINITY(x) || !x) { |
| 1565 | i = 0; |
| 1566 | } |
| 1567 | else { |
| 1568 | PyFPE_START_PROTECT("in math_frexp", return 0); |
| 1569 | x = frexp(x, &i); |
| 1570 | PyFPE_END_PROTECT(x); |
| 1571 | } |
| 1572 | return Py_BuildValue("(di)", x, i); |
Guido van Rossum | d18ad58 | 1991-10-24 14:57:21 +0000 | [diff] [blame] | 1573 | } |
| 1574 | |
Martin v. Löwis | 14f8b4c | 2002-06-13 20:33:02 +0000 | [diff] [blame] | 1575 | PyDoc_STRVAR(math_frexp_doc, |
Tim Peters | 63c9453 | 2001-09-04 23:17:42 +0000 | [diff] [blame] | 1576 | "frexp(x)\n" |
| 1577 | "\n" |
| 1578 | "Return the mantissa and exponent of x, as pair (m, e).\n" |
| 1579 | "m is a float and e is an int, such that x = m * 2.**e.\n" |
Martin v. Löwis | 14f8b4c | 2002-06-13 20:33:02 +0000 | [diff] [blame] | 1580 | "If x is 0, m and e are both 0. Else 0.5 <= abs(m) < 1.0."); |
Guido van Rossum | c6e2290 | 1998-12-04 19:26:43 +0000 | [diff] [blame] | 1581 | |
Barry Warsaw | 8b43b19 | 1996-12-09 22:32:36 +0000 | [diff] [blame] | 1582 | static PyObject * |
Fred Drake | 40c4868 | 2000-07-03 18:11:56 +0000 | [diff] [blame] | 1583 | math_ldexp(PyObject *self, PyObject *args) |
Guido van Rossum | d18ad58 | 1991-10-24 14:57:21 +0000 | [diff] [blame] | 1584 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1585 | double x, r; |
| 1586 | PyObject *oexp; |
| 1587 | long exp; |
| 1588 | int overflow; |
| 1589 | if (! PyArg_ParseTuple(args, "dO:ldexp", &x, &oexp)) |
| 1590 | return NULL; |
Alexandre Vassalotti | 6461e10 | 2008-05-15 22:09:29 +0000 | [diff] [blame] | 1591 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1592 | if (PyLong_Check(oexp)) { |
| 1593 | /* on overflow, replace exponent with either LONG_MAX |
| 1594 | or LONG_MIN, depending on the sign. */ |
| 1595 | exp = PyLong_AsLongAndOverflow(oexp, &overflow); |
| 1596 | if (exp == -1 && PyErr_Occurred()) |
| 1597 | return NULL; |
| 1598 | if (overflow) |
| 1599 | exp = overflow < 0 ? LONG_MIN : LONG_MAX; |
| 1600 | } |
| 1601 | else { |
| 1602 | PyErr_SetString(PyExc_TypeError, |
Serhiy Storchaka | 9594942 | 2013-08-27 19:40:23 +0300 | [diff] [blame] | 1603 | "Expected an int as second argument to ldexp."); |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1604 | return NULL; |
| 1605 | } |
Alexandre Vassalotti | 6461e10 | 2008-05-15 22:09:29 +0000 | [diff] [blame] | 1606 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1607 | if (x == 0. || !Py_IS_FINITE(x)) { |
| 1608 | /* NaNs, zeros and infinities are returned unchanged */ |
| 1609 | r = x; |
| 1610 | errno = 0; |
| 1611 | } else if (exp > INT_MAX) { |
| 1612 | /* overflow */ |
| 1613 | r = copysign(Py_HUGE_VAL, x); |
| 1614 | errno = ERANGE; |
| 1615 | } else if (exp < INT_MIN) { |
| 1616 | /* underflow to +-0 */ |
| 1617 | r = copysign(0., x); |
| 1618 | errno = 0; |
| 1619 | } else { |
| 1620 | errno = 0; |
| 1621 | PyFPE_START_PROTECT("in math_ldexp", return 0); |
| 1622 | r = ldexp(x, (int)exp); |
| 1623 | PyFPE_END_PROTECT(r); |
| 1624 | if (Py_IS_INFINITY(r)) |
| 1625 | errno = ERANGE; |
| 1626 | } |
Alexandre Vassalotti | 6461e10 | 2008-05-15 22:09:29 +0000 | [diff] [blame] | 1627 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1628 | if (errno && is_error(r)) |
| 1629 | return NULL; |
| 1630 | return PyFloat_FromDouble(r); |
Guido van Rossum | d18ad58 | 1991-10-24 14:57:21 +0000 | [diff] [blame] | 1631 | } |
| 1632 | |
Martin v. Löwis | 14f8b4c | 2002-06-13 20:33:02 +0000 | [diff] [blame] | 1633 | PyDoc_STRVAR(math_ldexp_doc, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1634 | "ldexp(x, i)\n\n\ |
| 1635 | Return x * (2**i)."); |
Guido van Rossum | c6e2290 | 1998-12-04 19:26:43 +0000 | [diff] [blame] | 1636 | |
Barry Warsaw | 8b43b19 | 1996-12-09 22:32:36 +0000 | [diff] [blame] | 1637 | static PyObject * |
Thomas Wouters | 89f507f | 2006-12-13 04:49:30 +0000 | [diff] [blame] | 1638 | math_modf(PyObject *self, PyObject *arg) |
Guido van Rossum | d18ad58 | 1991-10-24 14:57:21 +0000 | [diff] [blame] | 1639 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1640 | double y, x = PyFloat_AsDouble(arg); |
| 1641 | if (x == -1.0 && PyErr_Occurred()) |
| 1642 | return NULL; |
| 1643 | /* some platforms don't do the right thing for NaNs and |
| 1644 | infinities, so we take care of special cases directly. */ |
| 1645 | if (!Py_IS_FINITE(x)) { |
| 1646 | if (Py_IS_INFINITY(x)) |
| 1647 | return Py_BuildValue("(dd)", copysign(0., x), x); |
| 1648 | else if (Py_IS_NAN(x)) |
| 1649 | return Py_BuildValue("(dd)", x, x); |
| 1650 | } |
Christian Heimes | a342c01 | 2008-04-20 21:01:16 +0000 | [diff] [blame] | 1651 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1652 | errno = 0; |
| 1653 | PyFPE_START_PROTECT("in math_modf", return 0); |
| 1654 | x = modf(x, &y); |
| 1655 | PyFPE_END_PROTECT(x); |
| 1656 | return Py_BuildValue("(dd)", x, y); |
Guido van Rossum | d18ad58 | 1991-10-24 14:57:21 +0000 | [diff] [blame] | 1657 | } |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 1658 | |
Martin v. Löwis | 14f8b4c | 2002-06-13 20:33:02 +0000 | [diff] [blame] | 1659 | PyDoc_STRVAR(math_modf_doc, |
Tim Peters | 63c9453 | 2001-09-04 23:17:42 +0000 | [diff] [blame] | 1660 | "modf(x)\n" |
| 1661 | "\n" |
| 1662 | "Return the fractional and integer parts of x. Both results carry the sign\n" |
Benjamin Peterson | 6ebe78f | 2008-12-21 00:06:59 +0000 | [diff] [blame] | 1663 | "of x and are floats."); |
Guido van Rossum | c6e2290 | 1998-12-04 19:26:43 +0000 | [diff] [blame] | 1664 | |
Serhiy Storchaka | 9594942 | 2013-08-27 19:40:23 +0300 | [diff] [blame] | 1665 | /* A decent logarithm is easy to compute even for huge ints, but libm can't |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1666 | do that by itself -- loghelper can. func is log or log10, and name is |
Serhiy Storchaka | 9594942 | 2013-08-27 19:40:23 +0300 | [diff] [blame] | 1667 | "log" or "log10". Note that overflow of the result isn't possible: an int |
Mark Dickinson | 6ecd9e5 | 2010-01-02 15:33:56 +0000 | [diff] [blame] | 1668 | can contain no more than INT_MAX * SHIFT bits, so has value certainly less |
| 1669 | than 2**(2**64 * 2**16) == 2**2**80, and log2 of that is 2**80, which is |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1670 | small enough to fit in an IEEE single. log and log10 are even smaller. |
Serhiy Storchaka | 9594942 | 2013-08-27 19:40:23 +0300 | [diff] [blame] | 1671 | However, intermediate overflow is possible for an int if the number of bits |
| 1672 | in that int is larger than PY_SSIZE_T_MAX. */ |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1673 | |
| 1674 | static PyObject* |
Thomas Wouters | 89f507f | 2006-12-13 04:49:30 +0000 | [diff] [blame] | 1675 | loghelper(PyObject* arg, double (*func)(double), char *funcname) |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1676 | { |
Serhiy Storchaka | 9594942 | 2013-08-27 19:40:23 +0300 | [diff] [blame] | 1677 | /* If it is int, do it ourselves. */ |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1678 | if (PyLong_Check(arg)) { |
Mark Dickinson | c603717 | 2010-09-29 19:06:36 +0000 | [diff] [blame] | 1679 | double x, result; |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1680 | Py_ssize_t e; |
Mark Dickinson | c603717 | 2010-09-29 19:06:36 +0000 | [diff] [blame] | 1681 | |
| 1682 | /* Negative or zero inputs give a ValueError. */ |
| 1683 | if (Py_SIZE(arg) <= 0) { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1684 | PyErr_SetString(PyExc_ValueError, |
| 1685 | "math domain error"); |
| 1686 | return NULL; |
| 1687 | } |
Mark Dickinson | fa41e60 | 2010-09-28 07:22:27 +0000 | [diff] [blame] | 1688 | |
Mark Dickinson | c603717 | 2010-09-29 19:06:36 +0000 | [diff] [blame] | 1689 | x = PyLong_AsDouble(arg); |
| 1690 | if (x == -1.0 && PyErr_Occurred()) { |
| 1691 | if (!PyErr_ExceptionMatches(PyExc_OverflowError)) |
| 1692 | return NULL; |
| 1693 | /* Here the conversion to double overflowed, but it's possible |
| 1694 | to compute the log anyway. Clear the exception and continue. */ |
| 1695 | PyErr_Clear(); |
| 1696 | x = _PyLong_Frexp((PyLongObject *)arg, &e); |
| 1697 | if (x == -1.0 && PyErr_Occurred()) |
| 1698 | return NULL; |
| 1699 | /* Value is ~= x * 2**e, so the log ~= log(x) + log(2) * e. */ |
| 1700 | result = func(x) + func(2.0) * e; |
| 1701 | } |
| 1702 | else |
| 1703 | /* Successfully converted x to a double. */ |
| 1704 | result = func(x); |
| 1705 | return PyFloat_FromDouble(result); |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1706 | } |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1707 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1708 | /* Else let libm handle it by itself. */ |
| 1709 | return math_1(arg, func, 0); |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1710 | } |
| 1711 | |
| 1712 | static PyObject * |
| 1713 | math_log(PyObject *self, PyObject *args) |
| 1714 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1715 | PyObject *arg; |
| 1716 | PyObject *base = NULL; |
| 1717 | PyObject *num, *den; |
| 1718 | PyObject *ans; |
Raymond Hettinger | 866964c | 2002-12-14 19:51:34 +0000 | [diff] [blame] | 1719 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1720 | if (!PyArg_UnpackTuple(args, "log", 1, 2, &arg, &base)) |
| 1721 | return NULL; |
Raymond Hettinger | 866964c | 2002-12-14 19:51:34 +0000 | [diff] [blame] | 1722 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1723 | num = loghelper(arg, m_log, "log"); |
| 1724 | if (num == NULL || base == NULL) |
| 1725 | return num; |
Raymond Hettinger | 866964c | 2002-12-14 19:51:34 +0000 | [diff] [blame] | 1726 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1727 | den = loghelper(base, m_log, "log"); |
| 1728 | if (den == NULL) { |
| 1729 | Py_DECREF(num); |
| 1730 | return NULL; |
| 1731 | } |
Raymond Hettinger | 866964c | 2002-12-14 19:51:34 +0000 | [diff] [blame] | 1732 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1733 | ans = PyNumber_TrueDivide(num, den); |
| 1734 | Py_DECREF(num); |
| 1735 | Py_DECREF(den); |
| 1736 | return ans; |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1737 | } |
| 1738 | |
Martin v. Löwis | 14f8b4c | 2002-06-13 20:33:02 +0000 | [diff] [blame] | 1739 | PyDoc_STRVAR(math_log_doc, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1740 | "log(x[, base])\n\n\ |
| 1741 | Return the logarithm of x to the given base.\n\ |
Raymond Hettinger | 866964c | 2002-12-14 19:51:34 +0000 | [diff] [blame] | 1742 | If the base not specified, returns the natural logarithm (base e) of x."); |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1743 | |
| 1744 | static PyObject * |
Victor Stinner | fa0e3d5 | 2011-05-09 01:01:09 +0200 | [diff] [blame] | 1745 | math_log2(PyObject *self, PyObject *arg) |
| 1746 | { |
| 1747 | return loghelper(arg, m_log2, "log2"); |
| 1748 | } |
| 1749 | |
| 1750 | PyDoc_STRVAR(math_log2_doc, |
| 1751 | "log2(x)\n\nReturn the base 2 logarithm of x."); |
| 1752 | |
| 1753 | static PyObject * |
Thomas Wouters | 89f507f | 2006-12-13 04:49:30 +0000 | [diff] [blame] | 1754 | math_log10(PyObject *self, PyObject *arg) |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1755 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1756 | return loghelper(arg, m_log10, "log10"); |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1757 | } |
| 1758 | |
Martin v. Löwis | 14f8b4c | 2002-06-13 20:33:02 +0000 | [diff] [blame] | 1759 | PyDoc_STRVAR(math_log10_doc, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1760 | "log10(x)\n\nReturn the base 10 logarithm of x."); |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1761 | |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1762 | static PyObject * |
| 1763 | math_fmod(PyObject *self, PyObject *args) |
| 1764 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1765 | PyObject *ox, *oy; |
| 1766 | double r, x, y; |
| 1767 | if (! PyArg_UnpackTuple(args, "fmod", 2, 2, &ox, &oy)) |
| 1768 | return NULL; |
| 1769 | x = PyFloat_AsDouble(ox); |
| 1770 | y = PyFloat_AsDouble(oy); |
| 1771 | if ((x == -1.0 || y == -1.0) && PyErr_Occurred()) |
| 1772 | return NULL; |
| 1773 | /* fmod(x, +/-Inf) returns x for finite x. */ |
| 1774 | if (Py_IS_INFINITY(y) && Py_IS_FINITE(x)) |
| 1775 | return PyFloat_FromDouble(x); |
| 1776 | errno = 0; |
| 1777 | PyFPE_START_PROTECT("in math_fmod", return 0); |
| 1778 | r = fmod(x, y); |
| 1779 | PyFPE_END_PROTECT(r); |
| 1780 | if (Py_IS_NAN(r)) { |
| 1781 | if (!Py_IS_NAN(x) && !Py_IS_NAN(y)) |
| 1782 | errno = EDOM; |
| 1783 | else |
| 1784 | errno = 0; |
| 1785 | } |
| 1786 | if (errno && is_error(r)) |
| 1787 | return NULL; |
| 1788 | else |
| 1789 | return PyFloat_FromDouble(r); |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1790 | } |
| 1791 | |
| 1792 | PyDoc_STRVAR(math_fmod_doc, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1793 | "fmod(x, y)\n\nReturn fmod(x, y), according to platform C." |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1794 | " x % y may differ."); |
| 1795 | |
| 1796 | static PyObject * |
| 1797 | math_hypot(PyObject *self, PyObject *args) |
| 1798 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1799 | PyObject *ox, *oy; |
| 1800 | double r, x, y; |
| 1801 | if (! PyArg_UnpackTuple(args, "hypot", 2, 2, &ox, &oy)) |
| 1802 | return NULL; |
| 1803 | x = PyFloat_AsDouble(ox); |
| 1804 | y = PyFloat_AsDouble(oy); |
| 1805 | if ((x == -1.0 || y == -1.0) && PyErr_Occurred()) |
| 1806 | return NULL; |
| 1807 | /* hypot(x, +/-Inf) returns Inf, even if x is a NaN. */ |
| 1808 | if (Py_IS_INFINITY(x)) |
| 1809 | return PyFloat_FromDouble(fabs(x)); |
| 1810 | if (Py_IS_INFINITY(y)) |
| 1811 | return PyFloat_FromDouble(fabs(y)); |
| 1812 | errno = 0; |
| 1813 | PyFPE_START_PROTECT("in math_hypot", return 0); |
| 1814 | r = hypot(x, y); |
| 1815 | PyFPE_END_PROTECT(r); |
| 1816 | if (Py_IS_NAN(r)) { |
| 1817 | if (!Py_IS_NAN(x) && !Py_IS_NAN(y)) |
| 1818 | errno = EDOM; |
| 1819 | else |
| 1820 | errno = 0; |
| 1821 | } |
| 1822 | else if (Py_IS_INFINITY(r)) { |
| 1823 | if (Py_IS_FINITE(x) && Py_IS_FINITE(y)) |
| 1824 | errno = ERANGE; |
| 1825 | else |
| 1826 | errno = 0; |
| 1827 | } |
| 1828 | if (errno && is_error(r)) |
| 1829 | return NULL; |
| 1830 | else |
| 1831 | return PyFloat_FromDouble(r); |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1832 | } |
| 1833 | |
| 1834 | PyDoc_STRVAR(math_hypot_doc, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1835 | "hypot(x, y)\n\nReturn the Euclidean distance, sqrt(x*x + y*y)."); |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1836 | |
| 1837 | /* pow can't use math_2, but needs its own wrapper: the problem is |
| 1838 | that an infinite result can arise either as a result of overflow |
| 1839 | (in which case OverflowError should be raised) or as a result of |
| 1840 | e.g. 0.**-5. (for which ValueError needs to be raised.) |
| 1841 | */ |
| 1842 | |
| 1843 | static PyObject * |
| 1844 | math_pow(PyObject *self, PyObject *args) |
| 1845 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1846 | PyObject *ox, *oy; |
| 1847 | double r, x, y; |
| 1848 | int odd_y; |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1849 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1850 | if (! PyArg_UnpackTuple(args, "pow", 2, 2, &ox, &oy)) |
| 1851 | return NULL; |
| 1852 | x = PyFloat_AsDouble(ox); |
| 1853 | y = PyFloat_AsDouble(oy); |
| 1854 | if ((x == -1.0 || y == -1.0) && PyErr_Occurred()) |
| 1855 | return NULL; |
Christian Heimes | a342c01 | 2008-04-20 21:01:16 +0000 | [diff] [blame] | 1856 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1857 | /* deal directly with IEEE specials, to cope with problems on various |
| 1858 | platforms whose semantics don't exactly match C99 */ |
| 1859 | r = 0.; /* silence compiler warning */ |
| 1860 | if (!Py_IS_FINITE(x) || !Py_IS_FINITE(y)) { |
| 1861 | errno = 0; |
| 1862 | if (Py_IS_NAN(x)) |
| 1863 | r = y == 0. ? 1. : x; /* NaN**0 = 1 */ |
| 1864 | else if (Py_IS_NAN(y)) |
| 1865 | r = x == 1. ? 1. : y; /* 1**NaN = 1 */ |
| 1866 | else if (Py_IS_INFINITY(x)) { |
| 1867 | odd_y = Py_IS_FINITE(y) && fmod(fabs(y), 2.0) == 1.0; |
| 1868 | if (y > 0.) |
| 1869 | r = odd_y ? x : fabs(x); |
| 1870 | else if (y == 0.) |
| 1871 | r = 1.; |
| 1872 | else /* y < 0. */ |
| 1873 | r = odd_y ? copysign(0., x) : 0.; |
| 1874 | } |
| 1875 | else if (Py_IS_INFINITY(y)) { |
| 1876 | if (fabs(x) == 1.0) |
| 1877 | r = 1.; |
| 1878 | else if (y > 0. && fabs(x) > 1.0) |
| 1879 | r = y; |
| 1880 | else if (y < 0. && fabs(x) < 1.0) { |
| 1881 | r = -y; /* result is +inf */ |
| 1882 | if (x == 0.) /* 0**-inf: divide-by-zero */ |
| 1883 | errno = EDOM; |
| 1884 | } |
| 1885 | else |
| 1886 | r = 0.; |
| 1887 | } |
| 1888 | } |
| 1889 | else { |
| 1890 | /* let libm handle finite**finite */ |
| 1891 | errno = 0; |
| 1892 | PyFPE_START_PROTECT("in math_pow", return 0); |
| 1893 | r = pow(x, y); |
| 1894 | PyFPE_END_PROTECT(r); |
| 1895 | /* a NaN result should arise only from (-ve)**(finite |
| 1896 | non-integer); in this case we want to raise ValueError. */ |
| 1897 | if (!Py_IS_FINITE(r)) { |
| 1898 | if (Py_IS_NAN(r)) { |
| 1899 | errno = EDOM; |
| 1900 | } |
| 1901 | /* |
| 1902 | an infinite result here arises either from: |
| 1903 | (A) (+/-0.)**negative (-> divide-by-zero) |
| 1904 | (B) overflow of x**y with x and y finite |
| 1905 | */ |
| 1906 | else if (Py_IS_INFINITY(r)) { |
| 1907 | if (x == 0.) |
| 1908 | errno = EDOM; |
| 1909 | else |
| 1910 | errno = ERANGE; |
| 1911 | } |
| 1912 | } |
| 1913 | } |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1914 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1915 | if (errno && is_error(r)) |
| 1916 | return NULL; |
| 1917 | else |
| 1918 | return PyFloat_FromDouble(r); |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1919 | } |
| 1920 | |
| 1921 | PyDoc_STRVAR(math_pow_doc, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1922 | "pow(x, y)\n\nReturn x**y (x to the power of y)."); |
Christian Heimes | 53876d9 | 2008-04-19 00:31:39 +0000 | [diff] [blame] | 1923 | |
Christian Heimes | 072c0f1 | 2008-01-03 23:01:04 +0000 | [diff] [blame] | 1924 | static const double degToRad = Py_MATH_PI / 180.0; |
| 1925 | static const double radToDeg = 180.0 / Py_MATH_PI; |
Raymond Hettinger | d6f2267 | 2002-05-13 03:56:10 +0000 | [diff] [blame] | 1926 | |
| 1927 | static PyObject * |
Thomas Wouters | 89f507f | 2006-12-13 04:49:30 +0000 | [diff] [blame] | 1928 | math_degrees(PyObject *self, PyObject *arg) |
Raymond Hettinger | d6f2267 | 2002-05-13 03:56:10 +0000 | [diff] [blame] | 1929 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1930 | double x = PyFloat_AsDouble(arg); |
| 1931 | if (x == -1.0 && PyErr_Occurred()) |
| 1932 | return NULL; |
| 1933 | return PyFloat_FromDouble(x * radToDeg); |
Raymond Hettinger | d6f2267 | 2002-05-13 03:56:10 +0000 | [diff] [blame] | 1934 | } |
| 1935 | |
Martin v. Löwis | 14f8b4c | 2002-06-13 20:33:02 +0000 | [diff] [blame] | 1936 | PyDoc_STRVAR(math_degrees_doc, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1937 | "degrees(x)\n\n\ |
| 1938 | Convert angle x from radians to degrees."); |
Raymond Hettinger | d6f2267 | 2002-05-13 03:56:10 +0000 | [diff] [blame] | 1939 | |
| 1940 | static PyObject * |
Thomas Wouters | 89f507f | 2006-12-13 04:49:30 +0000 | [diff] [blame] | 1941 | math_radians(PyObject *self, PyObject *arg) |
Raymond Hettinger | d6f2267 | 2002-05-13 03:56:10 +0000 | [diff] [blame] | 1942 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1943 | double x = PyFloat_AsDouble(arg); |
| 1944 | if (x == -1.0 && PyErr_Occurred()) |
| 1945 | return NULL; |
| 1946 | return PyFloat_FromDouble(x * degToRad); |
Raymond Hettinger | d6f2267 | 2002-05-13 03:56:10 +0000 | [diff] [blame] | 1947 | } |
| 1948 | |
Martin v. Löwis | 14f8b4c | 2002-06-13 20:33:02 +0000 | [diff] [blame] | 1949 | PyDoc_STRVAR(math_radians_doc, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1950 | "radians(x)\n\n\ |
| 1951 | Convert angle x from degrees to radians."); |
Tim Peters | 7852616 | 2001-09-05 00:53:45 +0000 | [diff] [blame] | 1952 | |
Christian Heimes | 072c0f1 | 2008-01-03 23:01:04 +0000 | [diff] [blame] | 1953 | static PyObject * |
Mark Dickinson | 8e0c996 | 2010-07-11 17:38:24 +0000 | [diff] [blame] | 1954 | math_isfinite(PyObject *self, PyObject *arg) |
| 1955 | { |
| 1956 | double x = PyFloat_AsDouble(arg); |
| 1957 | if (x == -1.0 && PyErr_Occurred()) |
| 1958 | return NULL; |
| 1959 | return PyBool_FromLong((long)Py_IS_FINITE(x)); |
| 1960 | } |
| 1961 | |
| 1962 | PyDoc_STRVAR(math_isfinite_doc, |
| 1963 | "isfinite(x) -> bool\n\n\ |
Mark Dickinson | 226f544 | 2010-07-11 18:13:41 +0000 | [diff] [blame] | 1964 | Return True if x is neither an infinity nor a NaN, and False otherwise."); |
Mark Dickinson | 8e0c996 | 2010-07-11 17:38:24 +0000 | [diff] [blame] | 1965 | |
| 1966 | static PyObject * |
Christian Heimes | 072c0f1 | 2008-01-03 23:01:04 +0000 | [diff] [blame] | 1967 | math_isnan(PyObject *self, PyObject *arg) |
| 1968 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1969 | double x = PyFloat_AsDouble(arg); |
| 1970 | if (x == -1.0 && PyErr_Occurred()) |
| 1971 | return NULL; |
| 1972 | return PyBool_FromLong((long)Py_IS_NAN(x)); |
Christian Heimes | 072c0f1 | 2008-01-03 23:01:04 +0000 | [diff] [blame] | 1973 | } |
| 1974 | |
| 1975 | PyDoc_STRVAR(math_isnan_doc, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1976 | "isnan(x) -> bool\n\n\ |
Mark Dickinson | 226f544 | 2010-07-11 18:13:41 +0000 | [diff] [blame] | 1977 | Return True if x is a NaN (not a number), and False otherwise."); |
Christian Heimes | 072c0f1 | 2008-01-03 23:01:04 +0000 | [diff] [blame] | 1978 | |
| 1979 | static PyObject * |
| 1980 | math_isinf(PyObject *self, PyObject *arg) |
| 1981 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 1982 | double x = PyFloat_AsDouble(arg); |
| 1983 | if (x == -1.0 && PyErr_Occurred()) |
| 1984 | return NULL; |
| 1985 | return PyBool_FromLong((long)Py_IS_INFINITY(x)); |
Christian Heimes | 072c0f1 | 2008-01-03 23:01:04 +0000 | [diff] [blame] | 1986 | } |
| 1987 | |
| 1988 | PyDoc_STRVAR(math_isinf_doc, |
Benjamin Peterson | a0dfa82 | 2009-11-13 02:25:08 +0000 | [diff] [blame] | 1989 | "isinf(x) -> bool\n\n\ |
Mark Dickinson | 226f544 | 2010-07-11 18:13:41 +0000 | [diff] [blame] | 1990 | Return True if x is a positive or negative infinity, and False otherwise."); |
Christian Heimes | 072c0f1 | 2008-01-03 23:01:04 +0000 | [diff] [blame] | 1991 | |
Tal Einat | d5519ed | 2015-05-31 22:05:00 +0300 | [diff] [blame] | 1992 | static PyObject * |
| 1993 | math_isclose(PyObject *self, PyObject *args, PyObject *kwargs) |
| 1994 | { |
| 1995 | double a, b; |
| 1996 | double rel_tol = 1e-9; |
| 1997 | double abs_tol = 0.0; |
| 1998 | double diff = 0.0; |
| 1999 | long result = 0; |
| 2000 | |
| 2001 | static char *keywords[] = {"a", "b", "rel_tol", "abs_tol", NULL}; |
| 2002 | |
| 2003 | |
| 2004 | if (!PyArg_ParseTupleAndKeywords(args, kwargs, "dd|$dd:isclose", |
| 2005 | keywords, |
| 2006 | &a, &b, &rel_tol, &abs_tol |
| 2007 | )) |
| 2008 | return NULL; |
| 2009 | |
| 2010 | /* sanity check on the inputs */ |
| 2011 | if (rel_tol < 0.0 || abs_tol < 0.0 ) { |
| 2012 | PyErr_SetString(PyExc_ValueError, |
| 2013 | "tolerances must be non-negative"); |
| 2014 | return NULL; |
| 2015 | } |
| 2016 | |
| 2017 | if ( a == b ) { |
| 2018 | /* short circuit exact equality -- needed to catch two infinities of |
| 2019 | the same sign. And perhaps speeds things up a bit sometimes. |
| 2020 | */ |
| 2021 | Py_RETURN_TRUE; |
| 2022 | } |
| 2023 | |
| 2024 | /* This catches the case of two infinities of opposite sign, or |
| 2025 | one infinity and one finite number. Two infinities of opposite |
| 2026 | sign would otherwise have an infinite relative tolerance. |
| 2027 | Two infinities of the same sign are caught by the equality check |
| 2028 | above. |
| 2029 | */ |
| 2030 | |
| 2031 | if (Py_IS_INFINITY(a) || Py_IS_INFINITY(b)) { |
| 2032 | Py_RETURN_FALSE; |
| 2033 | } |
| 2034 | |
| 2035 | /* now do the regular computation |
| 2036 | this is essentially the "weak" test from the Boost library |
| 2037 | */ |
| 2038 | |
| 2039 | diff = fabs(b - a); |
| 2040 | |
| 2041 | result = (((diff <= fabs(rel_tol * b)) || |
| 2042 | (diff <= fabs(rel_tol * a))) || |
| 2043 | (diff <= abs_tol)); |
| 2044 | |
| 2045 | return PyBool_FromLong(result); |
| 2046 | } |
| 2047 | |
| 2048 | PyDoc_STRVAR(math_isclose_doc, |
| 2049 | "is_close(a, b, *, rel_tol=1e-09, abs_tol=0.0) -> bool\n" |
| 2050 | "\n" |
| 2051 | "Determine whether two floating point numbers are close in value.\n" |
| 2052 | "\n" |
| 2053 | " rel_tol\n" |
| 2054 | " maximum difference for being considered \"close\", relative to the\n" |
| 2055 | " magnitude of the input values\n" |
| 2056 | " abs_tol\n" |
| 2057 | " maximum difference for being considered \"close\", regardless of the\n" |
| 2058 | " magnitude of the input values\n" |
| 2059 | "\n" |
| 2060 | "Return True if a is close in value to b, and False otherwise.\n" |
| 2061 | "\n" |
| 2062 | "For the values to be considered close, the difference between them\n" |
| 2063 | "must be smaller than at least one of the tolerances.\n" |
| 2064 | "\n" |
| 2065 | "-inf, inf and NaN behave similarly to the IEEE 754 Standard. That\n" |
| 2066 | "is, NaN is not close to anything, even itself. inf and -inf are\n" |
| 2067 | "only close to themselves."); |
| 2068 | |
Barry Warsaw | 8b43b19 | 1996-12-09 22:32:36 +0000 | [diff] [blame] | 2069 | static PyMethodDef math_methods[] = { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 2070 | {"acos", math_acos, METH_O, math_acos_doc}, |
| 2071 | {"acosh", math_acosh, METH_O, math_acosh_doc}, |
| 2072 | {"asin", math_asin, METH_O, math_asin_doc}, |
| 2073 | {"asinh", math_asinh, METH_O, math_asinh_doc}, |
| 2074 | {"atan", math_atan, METH_O, math_atan_doc}, |
| 2075 | {"atan2", math_atan2, METH_VARARGS, math_atan2_doc}, |
| 2076 | {"atanh", math_atanh, METH_O, math_atanh_doc}, |
| 2077 | {"ceil", math_ceil, METH_O, math_ceil_doc}, |
| 2078 | {"copysign", math_copysign, METH_VARARGS, math_copysign_doc}, |
| 2079 | {"cos", math_cos, METH_O, math_cos_doc}, |
| 2080 | {"cosh", math_cosh, METH_O, math_cosh_doc}, |
| 2081 | {"degrees", math_degrees, METH_O, math_degrees_doc}, |
| 2082 | {"erf", math_erf, METH_O, math_erf_doc}, |
| 2083 | {"erfc", math_erfc, METH_O, math_erfc_doc}, |
| 2084 | {"exp", math_exp, METH_O, math_exp_doc}, |
| 2085 | {"expm1", math_expm1, METH_O, math_expm1_doc}, |
| 2086 | {"fabs", math_fabs, METH_O, math_fabs_doc}, |
| 2087 | {"factorial", math_factorial, METH_O, math_factorial_doc}, |
| 2088 | {"floor", math_floor, METH_O, math_floor_doc}, |
| 2089 | {"fmod", math_fmod, METH_VARARGS, math_fmod_doc}, |
| 2090 | {"frexp", math_frexp, METH_O, math_frexp_doc}, |
| 2091 | {"fsum", math_fsum, METH_O, math_fsum_doc}, |
| 2092 | {"gamma", math_gamma, METH_O, math_gamma_doc}, |
Serhiy Storchaka | 48e47aa | 2015-05-13 00:19:51 +0300 | [diff] [blame] | 2093 | {"gcd", math_gcd, METH_VARARGS, math_gcd_doc}, |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 2094 | {"hypot", math_hypot, METH_VARARGS, math_hypot_doc}, |
Tal Einat | d5519ed | 2015-05-31 22:05:00 +0300 | [diff] [blame] | 2095 | {"isclose", (PyCFunction) math_isclose, METH_VARARGS | METH_KEYWORDS, |
| 2096 | math_isclose_doc}, |
Mark Dickinson | 8e0c996 | 2010-07-11 17:38:24 +0000 | [diff] [blame] | 2097 | {"isfinite", math_isfinite, METH_O, math_isfinite_doc}, |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 2098 | {"isinf", math_isinf, METH_O, math_isinf_doc}, |
| 2099 | {"isnan", math_isnan, METH_O, math_isnan_doc}, |
| 2100 | {"ldexp", math_ldexp, METH_VARARGS, math_ldexp_doc}, |
| 2101 | {"lgamma", math_lgamma, METH_O, math_lgamma_doc}, |
| 2102 | {"log", math_log, METH_VARARGS, math_log_doc}, |
| 2103 | {"log1p", math_log1p, METH_O, math_log1p_doc}, |
| 2104 | {"log10", math_log10, METH_O, math_log10_doc}, |
Victor Stinner | fa0e3d5 | 2011-05-09 01:01:09 +0200 | [diff] [blame] | 2105 | {"log2", math_log2, METH_O, math_log2_doc}, |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 2106 | {"modf", math_modf, METH_O, math_modf_doc}, |
| 2107 | {"pow", math_pow, METH_VARARGS, math_pow_doc}, |
| 2108 | {"radians", math_radians, METH_O, math_radians_doc}, |
| 2109 | {"sin", math_sin, METH_O, math_sin_doc}, |
| 2110 | {"sinh", math_sinh, METH_O, math_sinh_doc}, |
| 2111 | {"sqrt", math_sqrt, METH_O, math_sqrt_doc}, |
| 2112 | {"tan", math_tan, METH_O, math_tan_doc}, |
| 2113 | {"tanh", math_tanh, METH_O, math_tanh_doc}, |
| 2114 | {"trunc", math_trunc, METH_O, math_trunc_doc}, |
| 2115 | {NULL, NULL} /* sentinel */ |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 2116 | }; |
| 2117 | |
Guido van Rossum | c6e2290 | 1998-12-04 19:26:43 +0000 | [diff] [blame] | 2118 | |
Martin v. Löwis | 14f8b4c | 2002-06-13 20:33:02 +0000 | [diff] [blame] | 2119 | PyDoc_STRVAR(module_doc, |
Tim Peters | 63c9453 | 2001-09-04 23:17:42 +0000 | [diff] [blame] | 2120 | "This module is always available. It provides access to the\n" |
Martin v. Löwis | 14f8b4c | 2002-06-13 20:33:02 +0000 | [diff] [blame] | 2121 | "mathematical functions defined by the C standard."); |
Guido van Rossum | c6e2290 | 1998-12-04 19:26:43 +0000 | [diff] [blame] | 2122 | |
Martin v. Löwis | 1a21451 | 2008-06-11 05:26:20 +0000 | [diff] [blame] | 2123 | |
| 2124 | static struct PyModuleDef mathmodule = { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 2125 | PyModuleDef_HEAD_INIT, |
| 2126 | "math", |
| 2127 | module_doc, |
| 2128 | -1, |
| 2129 | math_methods, |
| 2130 | NULL, |
| 2131 | NULL, |
| 2132 | NULL, |
| 2133 | NULL |
Martin v. Löwis | 1a21451 | 2008-06-11 05:26:20 +0000 | [diff] [blame] | 2134 | }; |
| 2135 | |
Mark Hammond | fe51c6d | 2002-08-02 02:27:13 +0000 | [diff] [blame] | 2136 | PyMODINIT_FUNC |
Martin v. Löwis | 1a21451 | 2008-06-11 05:26:20 +0000 | [diff] [blame] | 2137 | PyInit_math(void) |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 2138 | { |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 2139 | PyObject *m; |
Tim Peters | fe71f81 | 2001-08-07 22:10:00 +0000 | [diff] [blame] | 2140 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 2141 | m = PyModule_Create(&mathmodule); |
| 2142 | if (m == NULL) |
| 2143 | goto finally; |
Barry Warsaw | fc93f75 | 1996-12-17 00:47:03 +0000 | [diff] [blame] | 2144 | |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 2145 | PyModule_AddObject(m, "pi", PyFloat_FromDouble(Py_MATH_PI)); |
| 2146 | PyModule_AddObject(m, "e", PyFloat_FromDouble(Py_MATH_E)); |
Mark Dickinson | a5d0c7c | 2015-01-11 11:55:29 +0000 | [diff] [blame] | 2147 | PyModule_AddObject(m, "inf", PyFloat_FromDouble(m_inf())); |
| 2148 | #if !defined(PY_NO_SHORT_FLOAT_REPR) || defined(Py_NAN) |
| 2149 | PyModule_AddObject(m, "nan", PyFloat_FromDouble(m_nan())); |
| 2150 | #endif |
Barry Warsaw | fc93f75 | 1996-12-17 00:47:03 +0000 | [diff] [blame] | 2151 | |
Mark Dickinson | a5d0c7c | 2015-01-11 11:55:29 +0000 | [diff] [blame] | 2152 | finally: |
Antoine Pitrou | f95a1b3 | 2010-05-09 15:52:27 +0000 | [diff] [blame] | 2153 | return m; |
Guido van Rossum | 85a5fbb | 1990-10-14 12:07:46 +0000 | [diff] [blame] | 2154 | } |