Doc/whatsnew/3.2.rst

****************************
  What's New In Python 3.2
****************************

:Author: Raymond Hettinger
:Release: |release|
:Date: |today|

.. $Id$
   Rules for maintenance:

   * Anyone can add text to this document.  Do not spend very much time
   on the wording of your changes, because your text will probably
   get rewritten.

   * The maintainer will go through Misc/NEWS periodically and add
   changes; it's therefore more important to add your changes to
   Misc/NEWS than to this file.

   * This is not a complete list of every single change; completeness
   is the purpose of Misc/NEWS.  Some changes I consider too small
   or esoteric to include.  If such a change is added to the text,
   I'll just remove it.  (This is another reason you shouldn't spend
   too much time on writing your addition.)

   * If you want to draw your new text to the attention of the
   maintainer, add 'XXX' to the beginning of the paragraph or
   section.

   * It's OK to just add a fragmentary note about a change.  For
   example: "XXX Describe the transmogrify() function added to the
   socket module."  The maintainer will research the change and
   write the necessary text.

   * You can comment out your additions if you like, but it's not
   necessary (especially when a final release is some months away).

   * Credit the author of a patch or bugfix.   Just the name is
   sufficient; the e-mail address isn't necessary.  It's helpful to
   add the issue number:

     XXX Describe the transmogrify() function added to the socket
     module.

     (Contributed by P.Y. Developer; :issue:`12345`.)

   This saves the maintainer the effort of going through the SVN log
   when researching a change.

This article explains the new features in Python 3.2, compared to 3.1.

PEP 384: Defining a Stable ABI
==============================

In the past, extension modules built for one Python version were often
not usable with other Python versions. Particularly on Windows, every
feature release of Python required rebuilding all extension modules that
one wanted to use. This requirement was the result of the free access to
Python interpreter internals that extension modules could use.

With Python 3.2, an alternative approach becomes available: extension
modules which restrict themselves to a limited API (by defining
Py_LIMITED_API) cannot use many of the internals, but are constrained
to a set of API functions that are promised to be stable for several
releases. As a consequence, extension modules built for 3.2 in that
mode will also work with 3.3, 3.4, and so on. Extension modules that
make use of details of memory structures can still be built, but will
need to be recompiled for every feature release.

.. seealso::

   :pep:`384` - Defining a Stable ABI
      PEP written by Martin von Loewis.

PEP 389: Argparse Command Line Parsing Module
=============================================

A new module for command line parsing, :mod:`argparse`, was introduced to
overcome the limitations of :mod:`optparse` which did not provide support for
positional arguments (not just options), subcommands, required options and other
common patterns of specifying and validating options.

This module has already has wide-spread success in the community as a
third-party module.  Being more fully featured than its predecessor,
:mod:`argparse`, is now the preferred module for command-line processing.  The
older module is still being kept available because of the substantial amount of
legacy code that depends on it.

Here's an annotated example parser showing features like limiting results to a
set of choices, specifying a *metavar* in the help screen, validating that one
or more positional arguments is present, and making a required option::

    import argparse
    parser = argparse.ArgumentParser(
                description = 'Manage servers',         # main description for help
                epilog = 'Tested on Solaris and Linux') # displayed after help
    parser.add_argument('action',                       # argument name
                choices = ['deploy', 'start', 'stop'],  # one of four allowed values
                help = 'action on each target')         # help msg
    parser.add_argument('targets',
                metavar = 'HOSTNAME',                   # var name used in help msg
                nargs = '+',                            # require 1 or more targets
                help = 'url for target machines')       # help msg explanation
    parser.add_argument('-u', '--user',                 # -u or --user option
                required = True,                        # make this a required argument
                help = 'login as user')

Example of calling the parser on a command string::

    >>> cmd  = 'deploy sneezy.example.com sleepy.example.com -u skycaptain'
    >>> result = parser.parse_args(cmd.split())

    >>> # parsed variable are stored in the attributes
    >>> result.action
    'deploy'
    >>> result.targets
    ['sneezy.example.com', 'sleepy.example.com']
    >>> result.user
    'skycaptain'

Example of the parser's automatically generated help::

    >>> parser.parse_args('-h'.split())

    usage: tmp_argparse_example.py [-h] -u USER
                                   {deploy,start,stop} HOSTNAME [HOSTNAME ...]

    Manage servers

    positional arguments:
      {deploy,start,stop}   action on each target
      HOSTNAME              url for target machines

    optional arguments:
      -h, --help            show this help message and exit
      -u USER, --user USER  login as user

    Tested on Solaris and Linux


.. seealso::

   :pep:`389` - New Command Line Parsing Module
      PEP written by Steven Bethard.

   :ref:`upgrading-optparse-code` for details on the differences from
      :mod:`optparse`.


PEP 391:  Dictionary Based Configuration for Logging
====================================================

The :mod:`logging` module provided two kinds of configuration, one style with
function calls for each option or another style driven by an external file saved
in a :mod:`ConfigParser` format.  Those options did not provide the flexibility
to create configurations from JSON or YAML files, nor did they support
incremental configuration, which is needed for specifying logger options from a
command line.

To support a more flexible style, the module now offers
:func:`logging.config.dictConfig` for specifying logging configuration with
plain Python dictionaries.  The configuration options include formatters,
handlers, filters, and loggers.  Here's a working example of a configuration
dictionary::

   {"version": 1,
    "formatters": {"brief": {"format": "%(levelname)-8s: %(name)-15s: %(message)s"},
                   "full": {"format": "%(asctime)s %(name)-15s %(levelname)-8s %(message)s"},
                   },
    "handlers": {"console": {
                      "class": "logging.StreamHandler",
                      "formatter": "brief",
                      "level": "INFO",
                      "stream": "ext://sys.stdout"},
                 "console_priority": {
                      "class": "logging.StreamHandler",
                      "formatter": "full",
                      "level": "ERROR",
                      "stream": "ext://sys.stderr"},
                 },
    "root": {"level": "DEBUG", "handlers": ["console", "console_priority"]}}


If that dictionary is stored in a file called :file:`conf.json`, it can loaded
and called with code like this::

   >>> import logging.config
   >>> logging.config.dictConfig(json.load(open('conf.json', 'rb')))
   >>> logging.info("Transaction completed normally")
   >>> logging.critical("Abnormal termination")

.. seealso::

   :pep:`391` - Dictionary Based Configuration for Logging
      PEP written by Vinay Sajip.

PEP 3148:  The ``concurrent.futures`` module
============================================

Code for creating and managing concurrency is being collected in a new toplevel
namespace, *concurrent*.  Its first member is a *futures* package which provides
a uniform high level interface for managing threads and processes.

The design for :mod:`concurrent.futures` was inspired by
*java.util.concurrent.package*.  In that model, a running call and its result
are represented by a :class:`~concurrent.futures.Future` object which abstracts
features common to threads, processes, and remote procedure calls.  That object
supports status checks (running or done), timeouts, cancellations, adding
callbacks, and access to results or exceptions.XS

The primary offering of the new module is a pair of executor classes for
launching and managing calls.  The goal of the executors is to make it easier to
use existing tools for making parallel calls. They save the effort needed to
setup a pool of resources, launch the calls, create a results queue, add
time-out handling, and limit the total number of threads, processes, or remote
procedure calls.

Ideally, each application should share a single executor across multiple
components so that process and thread limits can be centrally managed.  This
solves the design challenge that arises when each component has its own
competing strategy for resource management.

For an example of :class:`~concurrent.futures.ThreadPoolExecutor`,
see :ref:`code for threaded parallel URL reads<threadpoolexecutor-example>`.

For an example of :class:`~concurrent.futures.ProcessPoolExecutor`,
see :ref:`code for computing prime numbers in parallel<processpoolexecutor-example>`.

.. seealso::

   :pep:`3148` - Futures -- Execute Computations Asynchronously
      PEP written by Brain Quinlan.


PEP 3147:  PYC Repository Directories
=====================================

Python's scheme for caching bytecode in *.pyc* files did not work well in
environments with multiple python interpreters.  If one interpreter encountered
a cached file created by another interpreter, it would recompile the source and
overwrite the cached file, thus losing the benefits of caching.

The issue of "pyc fights" has become more pronounced as it has become
commonplace for Linux distributions to ship with multiple versions of Python.
These conflicts also arise with CPython alternatives such as Unladen Swallow.

To solve this problem, Python's import machinery has been extended to use
distinct filenames for each interpreter.  Instead of Python 3.2 and Python 3.3 and
Unladen Swallow each competing for a file called "mymodule.pyc", they will now
look for "mymodule.cpython-32.pyc", "mymodule.cpython-33.pyc", and
"mymodule.unladen10.pyc".  And to prevent all of these new files from
cluttering source directories, the *pyc* files are now collected in a
"__pycache__" directory stored under the package directory.

Aside from the filenames and target directories, the new scheme has a few
aspects that are visible to the programmer:

* Imported modules now have a :attr:`__cached__` attribute which stores the name
  of the actual file that was imported:

   >>> import collections
   >>> collections.__cached__
   'c:/py32/lib/__pycache__/collections.cpython-32.pyc'

* The tag that is unique to each interpreter is accessible from the :mod:`imp`
  module:

   >>> import imp
   >>> imp.get_tag()
   'cpython-32'

* Scripts that try to deduce source filename from the imported file now need to
  be smarter.  It is no longer sufficient to simply strip the "c" from a ".pyc"
  filename.  Instead, use the new functions in the :mod:`imp` module:

  >>> imp.source_from_cache('c:/py32/lib/__pycache__/collections.cpython-32.pyc')
  'c:/py32/lib/collections.py'
  >>> imp.cache_from_source('c:/py32/lib/collections.py')
  'c:/py32/lib/__pycache__/collections.cpython-32.pyc'

* The :mod:`py_compile` and :mod:`compileall` modules have been updated to
  reflect the new naming convention and target directory.

.. seealso::

   :pep:`3147` - PYC Repository Directories
      PEP written by Barry Warsaw.


PEP 3149: ABI Version Tagged .so Files
======================================

The PYC repository directory allows multiple bytecode cache files to be
co-located.  This PEP implements a similar mechanism for shared object files by
giving them a common directory and distinct names for each version.

The common directory is "pyshared" and the file names are made distinct by
identifying the Python implementation (such as CPython, PyPy, Jython, etc.), the
major and minor version numbers, and optional build flags (such as "d" for
debug, "m" for pymalloc, "u" for wide-unicode).  For an arbitrary package "foo",
you may see these files when the distribution package is installed::

   /usr/share/pyshared/foo.cpython-32m.so
   /usr/share/pyshared/foo.cpython-33md.so

In Python itself, the tags are accessible from functions in the :mod:`sysconfig`
module::

   >>> import sysconfig
   >>> sysconfig.get_config_var('SOABI')    # find the version tag
   'cpython-32mu'
   >>> sysconfig.get_config_var('SO')       # find the full filename extension
   'cpython-32mu.so'

.. seealso::

   :pep:`3149` - ABI Version Tagged .so Files
      PEP written by Barry Warsaw.


Email 5.1
=========

The email package is extended to be able to parse and generate email messages
in bytes format.

* New functions :func:`~email.message_from_bytes` and
  :func:`~email.message_from_binary_file`, and new classes
  :class:`~email.parser.BytesFeedParser` and :class:`~email.parser.BytesParser`
  allow binary message data to be parsed into model objects.

* Given bytes input to the model, :meth:`~email.message.Message.get_payload`
  will by default decode a message body that has a
  :mailheader:`Content-Transfer-Encoding` of ``8bit`` using the charset
  specified in the MIME headers and return the resulting string.

* Given bytes input to the model, :class:`~email.generator.Generator` will
  convert message bodies that have a :mailheader:`Content-Transfer-Encoding` of
  8bit to instead have a 7bit Content-Transfer-Encoding.

* New class :class:`~email.generator.BytesGenerator` produces bytes
  as output, preserving any unchanged non-ASCII data that was
  present in the input used to build the model, including message bodies
  with a :mailheader:`Content-Transfer-Encoding` of 8bit.

  (Proposed and implemented by R. David Murray, :issue:`4661`.)


Other Language Changes
======================

Some smaller changes made to the core Python language are:

* :class:`bytes` and :class:`str` now have two net methods, *transform* and *untransform*.
  These provided analogues to *encode* and *decode* but are used for general purpose
  string-to-string and bytes-to-bytes transformations rather than Unicode codecs.

  Along with the new methods, several non-unicode codecs been restored from Python 2.x
  including *base64*, *bz2*, *hex*, *quopri*, *rot13*, *uu*, and *zlib*.

  >>> t = b'which witch had which witches wrist watch'
  >>> t.transform('quopri')
  b'which=20witch=20had=20which=20witches=20wrist=20watch'

  >>> short = t.transform('zlib_codec')
  >>> len(t), len(short)
  (41, 38)
  >>> short.untransform('zlib_codec')
  b'which witch had which witches wrist watch'

  (From multiple contributors in :issue:`7475`.)

* String formatting for :func:`format` and :meth:`str.format` gained new
  capabilities for the format character **#**.  Previously, for integers in
  binary, octal, or hexadecimal, it caused the output to be prefixed with '0b',
  '0o', or '0x' respectively.  Now it can also handle floats, complex, and
  Decimal, causing the output to always have a decimal point even when no digits
  follow it.

  >>> format(20, '#o')
  '0o24'
  >>> format(12.34, '#5.0f')
  '  12.'

  (Suggested by Mark Dickinson and implemented by Eric Smith in :issue:`7094`.)

* The interpreter can now be started with a quiet option, ``-q``, to suppress
  the copyright and version information in an interactive mode.

  (Contributed by Marcin Wojdyr in issue:`1772833`).

* The :func:`hasattr` function used to catch and suppress any Exception.  Now,
  it only catches :exc:`AttributeError`.  Under the hood, :func:`hasattr` works
  by calling :func:`getattr` and throwing away the results.  This is necessary
  because dynamic attribute creation is possible using :meth:`__getattribute__`
  or :meth:`__getattr__`.  If :func:`hasattr` were to just scan instance and class
  dictionaries it would miss the dynamic methods and make it difficult to
  implement proxy objects.

  (Discovered by Yury Selivanov and fixed by Benjamin Peterson; :issue:`9666`.)

* The :func:`str` of a float or complex number is now the same as its
  :func:`repr`. Previously, the :func:`str` form was shorter but that just
  caused confusion and is no longer needed now that the shortest possible
  :func:`repr` is displayed by default:

   >>> repr(math.pi)
   '3.141592653589793'
   >>> str(math.pi)
   '3.141592653589793'

  (Proposed and implemented by Mark Dickinson; :issue:`9337`.)

* :class:`memoryview` objects now have a :meth:`release()` method and support
  the context manager protocol.  This allows timely release of any resources
  that were acquired when requesting a buffer from the original object.

  >>> with memoryview(b'abcdefgh') as v:
  ...     print(v.tolist())
  ...
  [97, 98, 99, 100, 101, 102, 103, 104]

  (Added by Antoine Pitrou; :issue:`9757`.)

* Mark Dickinson crafted an elegant and efficient scheme for assuring that
  different numeric datatypes will have the same hash value whenever their
  actual values are equal::

   >>> assert hash(Fraction(3, 2)) == hash(1.5) == \
              hash(Decimal("1.5")) == hash(complex(1.5, 0))

  (See :issue:`8188`.)

* Previously it was illegal to delete a name from the local namespace if it
  occurs as a free variable in a nested block::

   >>> def outer(x):
   ...     def inner():
   ...        return x
   ...     inner()
   ...     del x

  This is now allowed.  Remember that the target of an :keyword:`except` clause
  is cleared, so this code which used to work with Python 2.6, raised a
  :exc:`SyntaxError` with Python 3.1 and now works again::

   >>> def f():
   ...     def print_error():
   ...        print(e)
   ...     try:
   ...        something
   ...     except Exception as e:
   ...        print_error()
   ...        # implicit "del e" here

  (See :issue:`4617`.)

* A new warning category, :exc:`ResourceWarning`, has been added.  It is
  emitted when potential issues with resource consumption or cleanup
  are detected.  It is silenced by default in normal release builds, but
  can be enabled through the means provided by the :mod:`warnings`
  module, or on the command line.

  A :exc:`ResourceWarning` is issued at interpreter shutdown if the
  :data:`gc.garbage` list isn't empty.  This is meant to make the programmer
  aware that their code contains object finalization issues.

  A :exc:`ResourceWarning` is also issued when a :term:`file object` is destroyed
  without having been explicitly closed.  While the deallocator for such
  object ensures it closes the underlying operating system resource
  (usually, a file descriptor), the delay in deallocating the object could
  produce various issues, especially under Windows.  Here is an example
  of enabling the warning from the command line::

      $ ./python -q -Wdefault
      >>> f = open("foo", "wb")
      >>> del f
      __main__:1: ResourceWarning: unclosed file <_io.BufferedWriter name='foo'>

  (Added by Antoine Pitrou and Georg Brandl in :issue:`10093` and :issue:`477863`.)

* :class:`range` objects now support *index* and *count* methods. This is part
  of an effort to make more objects fully implement the
  :class:`collections.Sequence` :term:`abstract base class`.  As a result, the
  language will have a more uniform API.  In addition, :class:`range` objects
  now support slicing and negative indices.  This makes *range* more
  interoperable with lists.

  (Contributed by Daniel Stuzback in :issue:`9213` and by Alexander Belopolsky
  in :issue:`2690`.)

* The :func:`callable` builtin function from Py2.x was resurrected.  It provides
  a concise, readable alternative to using an :term:`abstract base class` in an
  expression like ``isinstance(x, collections.Callable)``.

  (See :issue:`10518`.)

New, Improved, and Deprecated Modules
=====================================

* The :mod:`functools` module includes a new decorator for caching function
  calls.  :func:`functools.lru_cache` can save repeated queries to an external
  resource whenever the results are expected to be the same.

  For example, adding a caching decorator to a database query function can save
  database accesses for popular searches::

     @functools.lru_cache(maxsize=300)
     def get_phone_number(name):
         c = conn.cursor()
         c.execute('SELECT phonenumber FROM phonelist WHERE name=?', (name,))
         return c.fetchone()[0]

  >>> for name in user_requests:
  ...     get_phone_number(name)        # cached lookup

  To help with choosing an effective cache size, the wrapped function is
  instrumented for tracking cache statistics:

  >>> get_phone_number.cache_info()
  CacheInfo(hits=4805, misses=980, maxsize=300, currsize=300)

  If the phonelist table gets updated, the outdated contents of the cache can be
  cleared with:

  >>> get_phone_number.cache_clear()

  (Contributed by Raymond Hettinger and incorporating design ideas from
  Jim Baker, Miki Tebeka, and Nick Coghlan.)

* The :func:`functools.wraps` decorator now adds a :attr:`__wrapped__` attribute
  pointing to the original callable function.  This allows wrapped functions to
  be introspected.  It also copies :attr:`__annotations__` if defined.  And now
  it also gracefully skips over missing attributes such as :attr:`__doc__` which
  might not be defined for the wrapped callable.

  (By Nick Coghlan and Terrence Cole; :issue:`9567`, :issue:`3445`, and
  :issue:`8814`.)

* The :mod:`itertools` module has a new :func:`~itertools.accumulate` function
  modeled on APL's *scan* operator and on Numpy's *accumulate* function:

  >>> list(accumulate(8, 2, 50))
  [8, 10, 60]

  >>> prob_dist = [0.1, 0.4, 0.2, 0.3]
  >>> list(accumulate(prob_dist))      # cumulative probability distribution
  [0.1, 0.5, 0.7, 1.0]

  For an example using :func:`~itertools.accumulate`, see the :ref:`examples for
  the random module <random-examples>`.

  (Contributed by Raymond Hettinger and incorporating design suggestions
  from Mark Dickinson.)

* The :mod:`nntplib` module gets a revamped implementation with better bytes and
  unicode semantics as well as more practical APIs.  These improvements break
  compatibility with the nntplib version in Python 3.1, which was partly
  dysfunctional in itself.

  (Contributed by Antoine Pitrou in :issue:`9360`)

* The :mod:`abc` module now supports :func:`~abc.abstractclassmethod` and
  :func:`~abc.abstractstaticmethod`.

  These tools make it possible to define an :term:`Abstract Base Class` that
  requires a particular :func:`classmethod` or :func:`staticmethod` to be
  implemented.

  (Patch submitted by Daniel Urban; :issue:`5867`.)

* The previously deprecated :func:`contextlib.nested` function has been removed
  in favor of a plain :keyword:`with` statement which can accept multiple
  context managers.  The latter technique is faster (because it is built-in),
  and it does a better job finalizing multiple context managers when one of them
  raises an exception::

    >>> with open('mylog.txt') as infile, open('a.out', 'w') as outfile:
    ...     for line in infile:
    ...         if '<critical>' in line:
    ...             outfile.write(line)

  (Contributed by Georg Brandl and Mattias Brändström;
  `appspot issue 53094 <http://codereview.appspot.com/53094>`_.)

* The :class:`ftplib.FTP` class now supports the context manager protocol to
  unconditionally consume :exc:`socket.error` exceptions and to close the FTP
  connection when done::

   >>> from ftplib import FTP
   >>> with FTP("ftp1.at.proftpd.org") as ftp:
   ...     ftp.login()
   ...     ftp.dir()
   ...
   '230 Anonymous login ok, restrictions apply.'
   dr-xr-xr-x   9 ftp      ftp           154 May  6 10:43 .
   dr-xr-xr-x   9 ftp      ftp           154 May  6 10:43 ..
   dr-xr-xr-x   5 ftp      ftp          4096 May  6 10:43 CentOS
   dr-xr-xr-x   3 ftp      ftp            18 Jul 10  2008 Fedora

  Other file-like objects such as :class:`mmap.mmap` and :func:`fileinput.input`
  also grew auto-closing context managers::

      with fileinput.input(files=('log1.txt', 'log2.txt')) as f:
          for line in f:
              process(line)

  (Contributed by Tarek Ziadé and Giampaolo Rodolà in :issue:`4972`, and
  by Georg Brandl in :issue:`8046` and :issue:`1286`.)

.. mention os.popen and subprocess.Popen auto-closing of fds

* :class:`gzip.GzipFile` now implements the :class:`io.BufferedIOBase`
  :term:`abstract base class` (except for ``truncate()``).  It also has a
  :meth:`~gzip.GzipFile.peek` method and supports unseekable as well as
  zero-padded file objects.

  The :mod:`gzip` module also gains the :func:`~gzip.compress` and
  :func:`~gzip.decompress` functions for easier in-memory compression and
  decompression.

  Keep in mind that text needs to be encoded in to bytes before compressing
  and decompressing:

  >>> s = 'Three shall be the number thou shalt count, '
  >>> s += 'and the number of the counting shall be three'
  >>> b = s.encode()                        # convert to utf-8
  >>> len(b)
  89
  >>> c = gzip.compress(b)
  >>> len(c)
  77
  >>> gzip.decompress(c).decode()[:43]      # decompress and convert to text
  'Three shall be the number thou shalt count, '

  (Contributed by Anand B. Pillai in :issue:`3488`; and by Antoine Pitrou, Nir
  Aides and Brian Curtin in :issue:`9962`, :issue:`1675951`, :issue:`7471` and
  :issue:`2846`.)

* The :mod:`os` module now has the :const:`ST_RDONLY` and :const:`ST_NOSUID`
  constants for use with the :func:`~os.statvfs` function.

  (Patch by Adam Jackson; :issue:`7647`.)

* :func:`os.getppid` is now supported on Windows.  Note that it will continue to
  return the same pid even after the parent process has exited.

  (Patch by Jon Anglin; :issue:`6394`.)

* The :func:`shutil.copytree` function has two new options:

  * *ignore_dangling_symlinks*: when ``symlinks=False`` so that the function
    copies the file pointed to by the symlink, not the symlink itself. This
    option will silence the error raised if the file doesn't exist.

  * *copy_function*: is a callable that will be used to copy files.
    :func:`shutil.copy2` is used by default.

  (Contributed by Tarek Ziadé.)

* Socket objects now have a :meth:`~socket.socket.detach()` method which puts
  the socket into closed state without actually closing the underlying file
  descriptor.  The latter can then be reused for other purposes.

  (Added by Antoine Pitrou; :issue:`8524`.)

* The :mod:`sqlite3` module has two new capabilities.

  The :attr:`Connection.in_transit` attribute is true if there is an active
  transaction for uncommitted changes.

  The :meth:`Connection.enable_load_extension` and
  :meth:`Connection.load_extension` methods allows you to load SQLite extensions
  from ".so" files.  One well-known extension is the fulltext-search extension
  distributed with SQLite.

  (Contributed by R. David Murray and Shashwat Anand; :issue:`8845`.)

* The :mod:`ssl` module has a new class, :class:`~ssl.SSLContext` which serves
  as a container for various persistent SSL data, such as protocol settings,
  certificates, private keys, and various other options.  The
  :meth:`~ssl.SSLContext.wrap_socket` method allows to create an SSL socket from
  such an SSL context.  (Added by Antoine Pitrou; :issue:`8550`.)

  A new function, :func:`ssl.match_hostname`, helps implement server identity
  verification for higher-level protocols by implementing the rules of
  HTTPS (from :rfc:`2818`), which are also suitable for other protocols.
  (Added by Antoine Pitrou, :issue:`1589`).

  The :func:`ssl.wrap_socket` constructor function now takes a *ciphers*
  argument that's a string listing the encryption algorithms to be allowed; the
  format of the string is described `in the OpenSSL documentation
  <http://www.openssl.org/docs/apps/ciphers.html#CIPHER_LIST_FORMAT>`__.  (Added
  by Antoine Pitrou; :issue:`8322`.)

  When linked against a recent enough version of OpenSSL, the :mod:`ssl`
  module now supports the Server Name Indication extension to the TLS
  protocol, allowing for several "virtual hosts" using different certificates
  on a single IP/port.  This extension is only supported in client mode,
  and is activated by passing the *server_hostname* argument to
  :meth:`SSLContext.wrap_socket`.
  (Added by Antoine Pitrou, :issue:`5639`.)

  Various options have been added to the :mod:`ssl` module, such as
  :data:`~ssl.OP_NO_SSLv2` which allows to force disabling of the insecure and
  obsolete SSLv2 protocol.  (Added by Antoine Pitrou; :issue:`4870`.)

  Another change makes the extension load all of OpenSSL's ciphers and digest
  algorithms so that they're all available.  Some SSL certificates couldn't be
  verified, reporting an "unknown algorithm" error.  (Reported by Beda Kosata,
  and fixed by Antoine Pitrou; :issue:`8484`.)

  The version of OpenSSL being used is now available as the module attributes
  :data:`ssl.OPENSSL_VERSION` (a string), :data:`ssl.OPENSSL_VERSION_INFO` (a
  5-tuple), and :data:`ssl.OPENSSL_VERSION_NUMBER` (an integer).  (Added by
  Antoine Pitrou; :issue:`8321`.)

* :class:`http.client.HTTPSConnection`, :class:`urllib.request.HTTPSHandler`
  and :func:`urllib.request.urlopen` now take optional arguments to allow for
  server certificate checking against a set of Certificate Authorities,
  as recommended in public uses of HTTPS.
  (Added by Antoine Pitrou, :issue:`9003`.)

* The command-line call, ``python -m unittest`` can now accept file paths
  instead of module names for running specific tests (:issue:`10620`).  The new
  test discovery can find tests within packages, locating any test importable
  from the top level directory.  The top level directory can be specified with
  the `-t` option, a pattern for matching files with ``-p``, and a directory to
  start discovery with ``-s``::

    $ python -m unittest discover -s my_proj_dir -p '_test.py'

  (Contributed by Michael Foord.)

* The :mod:`unittest` module has two new methods,
  :meth:`~unittest.TestCase.assertWarns` and
  :meth:`~unittest.TestCase.assertWarnsRegex` to check that a given warning type
  is triggered by the code under test:

  >>> with self.assertWarns(DeprecationWarning):
  ...     legacy_function('XYZ')

  Another new method, :meth:`~unittest.TestCase.assertCountEqual` is used to compare two iterables
  to determine if their element counts are equal (are the same elements present
  the same number of times::

     def test_anagram(self):
         self.assertCountEqual('algorithm', 'logarithm')

  A principal feature of the unittest module is an effort to produce meaningful
  diagnostics when a test fails.  When possible the failure is recorded along
  with a diff of the output.  This is especially helpful for analyzing log files
  of failed test runs. However, since diffs can sometime be voluminous, there is
  a new :attr:`~unittest.TestCase.maxDiff` attribute which sets maximum length of
  diffs.

  In addition the naming in the module has undergone a number of clean-ups.  For
  example, :meth:`~unittest.TestCase.assertRegex` is the new name for
  :meth:`~unittest.TestCase.assertRegexpMatches` which was misnamed because the
  test uses :func:`re.search`, not :func:`re.match`.

  To improve consistency, some of long-standing method aliases are being
  deprecated in favor of the preferred names:

   - replace :meth:`assert_` with :meth:`.assertTrue`
   - replace :meth:`assertEquals` with :meth:`.assertEqual`
   - replace :meth:`assertNotEquals` with :meth:`.assertNotEqual`
   - replace :meth:`assertAlmostEquals` with :meth:`.assertAlmostEqual`
   - replace :meth:`assertNotAlmostEquals` with :meth:`.assertNotAlmostEqual`

  Likewise, the ``TestCase.fail*`` methods deprecated in Python 3.1 are expected
  to be removed in Python 3.3. See also the :ref:`deprecated-aliases` section in
  the :mod:`unittest` documentation.

  (Contributed by Ezio Melotti; :issue:`9424`.)

* The previously deprecated :func:`string.maketrans` function has been removed
  in favor of the static methods, :meth:`bytes.maketrans` and
  :meth:`bytearray.maketrans`.  This change solves the confusion around which
  types were supported by the :mod:`string` module.  Now, :class:`str`,
  :class:`bytes`, and :class:`bytearray` each have their own **maketrans** and
  **translate** methods with intermediate translation tables of the appropriate
  type.

  (Contributed by Georg Brandl; :issue:`5675`.)

* :class:`~poplib.POP3_SSL` class now accepts a *context* parameter, which is a
  :class:`ssl.SSLContext` object allowing bundling SSL configuration options,
  certificates and private keys into a single (potentially long-lived)
  structure.

  (Contributed by Giampaolo Rodolà; :issue:`8807`.)

* :func:`socket.create_connection` now supports the context manager protocol
  to unconditionally consume :exc:`socket.error` exceptions and to close the
  socket when done.

  (Contributed by Giampaolo Rodolà; :issue:`9794`.)

* :class:`asyncore.dispatcher` now provides a
  :meth:`~asyncore.dispatcher.handle_accepted()` method
  returning a `(sock, addr)` pair which is called when a connection has actually
  been established with a new remote endpoint. This is supposed to be used as a
  replacement for old :meth:`~asyncore.dispatcher.handle_accept()` and avoids
  the user  to call :meth:`~asyncore.dispatcher.accept()` directly.

  (Contributed by Giampaolo Rodolà; :issue:`6706`.)

* The :mod:`tempfile` module has a new context manager,
  :class:`~tempfile.TemporaryDirectory` which provides easy deterministic
  cleanup of temporary directories:

  >>> with tempfile.TemporaryDirectory() as tmpdirname:
  ...     print 'created temporary directory', tmpdirname

  (Contributed by Neil Schemenauer and Nick Coghlan; :issue:`5178`.)

* The :mod:`smtplib` :class:`~smtplib.SMTP` class now accepts a byte string
  for the *msg* argument to the :meth:`~smtplib.SMTP.sendmail` method,
  and a new method, :meth:`~smtplib.SMTP.send_message` accepts a
  :class:`~email.message.Message` object and can optionally obtain the
  *from_addr* and *to_addrs* addresses directly from the object.

  (Contributed by R. David Murray, :issue:`10321`.)

* The :mod:`inspect` module has a new function :func:`getgenatorstate`
  to easily identify the current state of a generator as one of
  ``GEN_CREATED``, ``GEN_RUNNING``, ``GEN_SUSPENDED`` or ``GEN_CLOSED``.

  (Contributed by Rodolpho Eckhardt and Nick Coghlan, :issue:`10220`.)

.. XXX: Create a new section for all changes relating to context managers.
.. XXX: Various ConfigParser changes
.. XXX: Mention inspect.getattr_static (Michael Foord)
.. XXX: Mention urllib.parse changes
          Issue 9873 (Nick Coghlan):
            - ASCII byte sequence support in URL parsing
            - named tuple for urldefrag return value
          Issue 5468 (Dan Mahn) for urlencode:
            - bytes input support
            - non-UTF8 percent encoding of non-ASCII characters
          Issue 2987 for IPv6 (RFC2732) support in urlparse

* The :mod:`pydoc` module now provides a much improved Web server interface,
  as well as a new command-line option to automatically open a browser
  window to display that server.

  (Contributed by Ron Adam; :issue:`2001`.)

* The new :mod:`sysconfig` module makes it straight-forward to discover
  installation paths and configuration variables which vary across platforms and
  installs.

  The module offers access simple access functions for platform and version
  information:

  * :func:`~sysconfig.get_platform` returning values like *linux-i586* or
    *macosx-10.6-ppc*.
  * :func:`~sysconfig.get_python_version` returns a Python version string in
    the form, "3.2".

  It also provides access to the paths and variables corresponding to one of
  seven named schemes used by :mod:`distutils`.  Those include *posix_prefix*,
  *posix_home*, *posix_user*, *nt*, *nt_user*, *os2*, *os2_home*:

  * :func:`~sysconfig.get_paths` makes a dictionary containing installation paths
    for the current installation scheme.
  * :func:`~sysconfig.get_config_vars` returns a dictionary of platform specific
    variables.

  There is also a convenient command-line interface::

    C:\Python32>python -m sysconfig
    Platform: "win32"
    Python version: "3.2"
    Current installation scheme: "nt"

    Paths:
            data = "C:\Python32"
            include = "C:\Python32\Include"
            platinclude = "C:\Python32\Include"
            platlib = "C:\Python32\Lib\site-packages"
            platstdlib = "C:\Python32\Lib"
            purelib = "C:\Python32\Lib\site-packages"
            scripts = "C:\Python32\Scripts"
            stdlib = "C:\Python32\Lib"

    Variables:
            BINDIR = "C:\Python32"
            BINLIBDEST = "C:\Python32\Lib"
            EXE = ".exe"
            INCLUDEPY = "C:\Python32\Include"
            LIBDEST = "C:\Python32\Lib"
            SO = ".pyd"
            VERSION = "32"
            abiflags = ""
            base = "C:\Python32"
            exec_prefix = "C:\Python32"
            platbase = "C:\Python32"
            prefix = "C:\Python32"
            projectbase = "C:\Python32"
            py_version = "3.2b1"
            py_version_nodot = "32"
            py_version_short = "3.2"
            srcdir = "C:\Python32"
            userbase = "C:\Documents and Settings\Raymond\Application Data\Python"

* The :mod:`pdb` debugger module gained a number of usability improvements:

  - :file:`pdb.py` now has a ``-c`` option that executes commands as given in a
    :file:`.pdbrc` script file.
  - A :file:`.pdbrc` script file can contain ``continue`` and ``next`` commands
    that continue debugging.
  - The :class:`Pdb` class constructor now accepts a *nosigint* argument.
  - new commands: ``l(list)``, ``ll(long list`` and ``source`` for
    listing source code.
  - new commands: ``display`` and ``undisplay`` for showing or hiding
    the value of an expression if it has changed.
  - new command: ``interact`` for starting an interactive interpreter containing
    the global and local  names found in the current scope.
  - breakpoints can be cleared by breakpoint number


Multi-threading
===============

* The mechanism for serializing execution of concurrently running Python threads
  (generally known as the GIL or Global Interpreter Lock) has been rewritten.
  Among the objectives were more predictable switching intervals and reduced
  overhead due to lock contention and the number of ensuing system calls.  The
  notion of a "check interval" to allow thread switches has been abandoned and
  replaced by an absolute duration expressed in seconds.  This parameter is
  tunable through :func:`sys.setswitchinterval()`.  It currently defaults to 5
  milliseconds.

  Additional details about the implementation can be read from a `python-dev
  mailing-list message
  <http://mail.python.org/pipermail/python-dev/2009-October/093321.html>`_
  (however, "priority requests" as exposed in this message have not been kept
  for inclusion).

  (Contributed by Antoine Pitrou.)

* Recursive locks (created with the :func:`threading.RLock` API) now benefit
  from a C implementation which makes them as fast as regular locks, and between
  10x and 15x faster than their previous pure Python implementation.

  (Contributed by Antoine Pitrou; :issue:`3001`.)

* Regular and recursive locks now accept an optional *timeout* argument to their
  :meth:`acquire` method.  (Contributed by Antoine Pitrou; :issue:`7316`.)

  Similarly, :meth:`threading.Semaphore.acquire` also gains a *timeout*
  argument.  (Contributed by Torsten Landschoff; :issue:`850728`.)


Optimizations
=============

A number of small performance enhancements have been added:

* Python's peephole optimizer now recognizes patterns such ``x in {1, 2, 3}`` as
  being a test for membership in a set of constants.  The optimizer recasts the
  :class:`set` as a :class:`frozenset` and stores the pre-built constant.

  Now that the speed penalty is gone, it is practical to start writing
  membership tests using set-notation.  This style is both semantically clear
  and operationally fast::

      extension = name.rpartition('.')[2]
      if extension in {'xml', 'html', 'xhtml', 'css'}:
          handle(name)

  (Patch and additional tests by Dave Malcolm; :issue:`6690`).

* Serializing and unserializing data using the :mod:`pickle` module is now
  several times faster.

  (Contributed by Alexandre Vassalotti, Antoine Pitrou
  and the Unladen Swallow team in :issue:`9410` and :issue:`3873`.)

* The `Timsort algorithm <http://en.wikipedia.org/wiki/Timsort>`_ used in
  :meth:`list.sort` and :func:`sorted` now runs faster and used less memory
  when called with a :term:`key function`.  Previously, every element of
  a list was wrapped with a temporary object that remembered the key value
  associated with each element.  Now, an array of keys and values are
  sorted in parallel.  This save the memory consumed by the sort wrappers,
  and it saves time lost from during comparisons which where delegated
  by the sort wrappers.

  (Patch by Daniel Stuzback in :issue:`9915`.)

* JSON decoding performance is improved and memory consumption is reduced
  whenever the same string is repeated for multiple keys.  Also, JSON encoding
  now uses the C speedups when the ``sort_keys`` argument is true.

  (Contributed by Antoine Pitrou in :issue:`7451` and by Raymond Hettinger and
  Antoine Pitrou in :issue:`10314`.)

* The fast-search algorithm in stringlib is now used by the :meth:`split`,
  :meth:`rsplit`, :meth:`splitlines` and :meth:`replace` methods on
  :class:`bytes`, :class:`bytearray` and :class:`str` objects. Likewise, the
  algorithm is also used by :meth:`rfind`, :meth:`rindex`, :meth:`rsplit` and
  :meth:`rpartition`.

  (Patch by Florent Xicluna in :issue:`7622` and :issue:`7462`.)

There were several other minor optimizations. Set differencing now runs faster
when one operand is much larger than the other (Patch by Andress Bennetts in
:issue:`8685`).  The :meth:`array.repeat` method has a faster implementation
(:issue:`1569291` by Alexander Belopolsky). The :class:`BaseHTTPRequestHandler`
has more efficient buffering (:issue:`3709` by Andrew Schaaf).  The
multi-argument form of :func:`operator.attrgetter` now function runs slightly
faster (:issue:`10160` by Christos Georgiou).  And :class:`ConfigParser` loads
multi-line arguments a bit faster (:issue:`7113` by Łukasz Langa).


Unicode
=======

Python has been updated to Unicode 6.0.0.  The new features of the
Unicode Standard that will affect Python users include:

* adds 2,088 characters, including over 1,000 additional symbols—chief
  among them the additional emoji symbols, which are especially
  important for mobile phones;

* corrects character properties for existing characters including

  - a general category change to two Kannada characters (U+0CF1,
    U+0CF2), which has the effect of making them newly eligible for
    inclusion in identifiers;

  - a general category change to one New Tai Lue numeric character
    (U+19DA), which would have the effect of disqualifying it from
    inclusion in identifiers unless grandfathering measures are in place
    for the defining identifier syntax.

The :mod:`os` module has two new functions: :func:`~os.fsencode` and
:func:`~os.fsdecode`. Add :data:`os.environb`: bytes version of
:data:`os.environ`, :func:`os.getenvb` function and
:data:`os.supports_bytes_environ` constant.

``'mbcs'`` encoding doesn't ignore the error handler argument any more. By
default (strict mode), it raises an UnicodeDecodeError on undecodable byte
sequence and UnicodeEncodeError on unencodable character. To get the ``'mbcs'``
encoding of Python 3.1, use ``'ignore'`` error handler to decode and
``'replace'`` error handler to encode. ``'mbcs'`` supports ``'strict'`` and
``'ignore'`` error handlers for decoding, and ``'strict'`` and ``'replace'``
for encoding.

On Mac OS X, Python uses ``'utf-8'`` to decode the command line arguments,
instead of the locale encoding (which is ISO-8859-1 if the ``LANG`` environment
variable is not set).

By default, tarfile uses ``'utf-8'`` encoding on Windows (instead of
``'mbcs'``), and the ``'surrogateescape'`` error handler on all operating
systems.


Documentation
=============

The documentation continues to be improved.

A table of quick links has been added to the top of lengthy sections such as
:ref:`built-in-funcs`.  In the case of :mod:`itertools`, the links are
accompanied by tables of cheatsheet-style summaries to provide an overview and
memory jog without having to read all of the docs.

In some cases, the pure python source code can be helpful adjunct to the docs,
so now some modules feature quick links to the latest version of the source
code.  For example, the :mod:`functools` module documentation has a quick link
at the top labeled :source:`functools Python source code <Lib/functools.py>`.

The docs now contain more examples and recipes.  In particular, :mod:`re` module
has an extensive section, :ref:`re-examples`.  Likewise, the :mod:`itertools`
module continues to be updated with new :ref:`itertools-recipes`.

The :mod:`datetime` module now has an auxiliary implementation in pure Python.
No functionality was changed.  This just provides an easier-to-read
alternate implementation.  (Contributed by Alexander Belopolsky.)


IDLE
====

* The format menu now has an option to clean-up source files by strip trailing
  whitespace (:issue:`5150`).


Build and C API Changes
=======================

Changes to Python's build process and to the C API include:

* The C functions that access the Unicode Database now accept and return
  characters from the full Unicode range, even on narrow unicode builds
  (Py_UNICODE_TOLOWER, Py_UNICODE_ISDECIMAL, and others).  A visible difference
  in Python is that :func:`unicodedata.numeric` now returns the correct value
  for large code points, and :func:`repr` may consider more characters as
  printable.

  (Reported by Bupjoe Lee and fixed by Amaury Forgeot D'Arc; :issue:`5127`.)

* Computed gotos are now enabled by default on supported compilers (which are
  detected by the configure script).  They can still be disabled selectively by
  specifying ``--without-computed-gotos``.

  (Contributed by Antoine Pitrou; :issue:`9203`.)

* The option ``--with-wctype-functions`` was removed.  The built-in unicode
  database is now used for all functions.

  (Contributed by Amaury Forgeot D'Arc; :issue:`9210`.)

* Hash values are now values of a new type, Py_hash_t, which is defined to
  be the same size as a pointer.  Previously they were of type long, which
  on some 64-bit operating systems is still only 32 bits long.  As a result
  of this fix, :class:`set` and :class:`dict` can now hold more than ``2**32``
  entries on builds with 64-bit pointers (previously, they could grow to
  that size but their performance degraded catastrophically).

  (Contributed by Benjamin Peterson; :issue:`9778`.)


Porting to Python 3.2
=====================

This section lists previously described changes and other bugfixes that may
require changes to your code:

* The :mod:`nntplib` module was reworked extensively, meaning that its APIs
  are often incompatible with the 3.1 APIs.

* :class:`bytearray` objects can no longer be used as filenames; instead,
  they should be converted to :class:`bytes`.

* PyArg_Parse*() functions:

  * "t#" format has been removed: use "s#" or "s*" instead
  * "w" and "w#" formats has been removed: use "w*" instead

* The :c:type:`PyCObject` type, deprecated in 3.1, has been removed.  To wrap
  opaque C pointers in Python objects, the :c:type:`PyCapsule` API should be used
  instead; the new type has a well-defined interface for passing typing safety
  information and a less complicated signature for calling a destructor.

 * The :func:`sys.setfilesystemencoding` function was removed because
   it had a flawed design.