Lib/compiler/transformer.py

#
# Copyright (C) 1997-1998 Greg Stein. All Rights Reserved.
#
# This module is provided under a BSD-ish license. See
#   http://www.opensource.org/licenses/bsd-license.html
# and replace OWNER, ORGANIZATION, and YEAR as appropriate.
#
#
# Written by Greg Stein (gstein@lyra.org)
#        and Bill Tutt (rassilon@lima.mudlib.org)
# February 1997.
#
# Support for ast.Node subclasses written and other revisions by
#  Jeremy Hylton (jeremy@beopen.com)
#

"""Parse tree transformation module.

Transforms Python source code into an abstract syntax tree (AST)
defined in the ast module.

The simplest ways to invoke this module are via parse and parseFile.
parse(buf) -> AST
parseFile(path) -> AST
"""

#
# The output tree has the following nodes:
#
# Source Python line #'s appear at the end of each of all of these nodes
# If a line # doesn't apply, there will be a None instead.
#
# module:     doc, node
# stmt:       [ node1, ..., nodeN ]
# function:   name, argnames, defaults, flags, doc, codeNode
# lambda:     argnames, defaults, flags, codeNode
# classdef:   name, bases, doc, codeNode
# pass:
# break:
# continue:
# for:        assignNode, listNode, bodyNode, elseNode
# while:      testNode, bodyNode, elseNode
# if:         [ (testNode, suiteNode), ... ], elseNode
# exec:       expr1Node, expr2Node, expr3Node
# from:       modname, [ name1, ..., nameN ]
# import:     [ name1, ..., nameN ]
# raise:      expr1Node, expr2Node, expr3Node
# tryfinally: trySuiteNode, finSuiteNode
# tryexcept:  trySuiteNode, [ (exprNode, assgnNode, suiteNode), ... ], elseNode
# return:     valueNode
# const:      value
# print:      [ node1, ..., nodeN ]
# printnl:    [ node1, ..., nodeN ]
# discard:    exprNode
# assign:     [ node1, ..., nodeN ], exprNode
# ass_tuple:  [ node1, ..., nodeN ]
# ass_list:   [ node1, ..., nodeN ]
# ass_name:   name, flags
# ass_attr:   exprNode, attrname, flags
# list:       [ node1, ..., nodeN ]
# dict:       [ (key1, val1), ..., (keyN, valN) ]
# not:        exprNode
# compare:    exprNode, [ (op, node), ..., (op, node) ]
# name:       name
# global:     [ name1, ..., nameN ]
# backquote:  node
# getattr:    exprNode, attrname
# call_func:  node, [ arg1, ..., argN ]
# keyword:    name, exprNode
# subscript:  exprNode, flags, [ sub1, ..., subN ]
# ellipsis:
# sliceobj:   [ node1, ..., nodeN ]
# slice:      exprNode, flags, lowerNode, upperNode
# assert:     expr1, expr2
#
# Compiled as "binary" ops:
# tuple:      [ node1, ..., nodeN ]
# or:         [ node1, ..., nodeN ]
# and:        [ node1, ..., nodeN ]
# bitor:      [ node1, ..., nodeN ]
# bitxor:     [ node1, ..., nodeN ]
# bitand:     [ node1, ..., nodeN ]
#
# Operations easily evaluateable on constants:
# <<:         exprNode, shiftNode
# >>:         exprNode, shiftNode
# +:          leftNode, rightNode
# -:          leftNode, rightNode
# *:          leftNode, rightNode
# /:          leftNode, rightNode
# %:          leftNode, rightNode
# power:      leftNode, rightNode
# unary+:     node
# unary-:     node
# invert:     node
#

import ast
import parser
import symbol
import token
import string

import pprint

error = 'walker.error'

from consts import CO_VARARGS, CO_VARKEYWORDS
from consts import OP_ASSIGN, OP_DELETE, OP_APPLY

def parseFile(path):
    f = open(path)
    src = f.read()
    f.close()
    return parse(src)

def parse(buf):
    return Transformer().parsesuite(buf)

def asList(nodes):
    l = []
    for item in nodes:
        if hasattr(item, "asList"):
            l.append(item.asList())
        else:
            if type(item) is type( (None, None) ):
                l.append(tuple(asList(item)))
            elif type(item) is type( [] ):
                l.append(asList(item))
            else:
                l.append(item)
    return l

def Node(*args):
    kind = args[0]
    if ast.nodes.has_key(kind):
        try:
            return apply(ast.nodes[kind], args[1:])
        except TypeError:
            print ast.nodes[kind], len(args), args
            raise
    else:
        raise error, "Can't find appropriate Node type."
        #return apply(ast.Node, args)

class Transformer:
    """Utility object for transforming Python parse trees.

    Exposes the following methods:
        tree = transform(ast_tree)
        tree = parsesuite(text)
        tree = parseexpr(text)
        tree = parsefile(fileob | filename)
    """

    def __init__(self):
        self._dispatch = { }
        for value, name in symbol.sym_name.items():
            if hasattr(self, name):
                self._dispatch[value] = getattr(self, name)

    def transform(self, tree):
        """Transform an AST into a modified parse tree."""
        if type(tree) != type(()) and type(tree) != type([]):
            tree = parser.ast2tuple(tree,1)
        return self.compile_node(tree)

    def parsesuite(self, text):
        """Return a modified parse tree for the given suite text."""
        # Hack for handling non-native line endings on non-DOS like OSs.
        text = string.replace(text, '\x0d', '')
        return self.transform(parser.suite(text))

    def parseexpr(self, text):
        """Return a modified parse tree for the given expression text."""
        return self.transform(parser.expr(text))

    def parsefile(self, file):
        """Return a modified parse tree for the contents of the given file."""
        if type(file) == type(''):
            file = open(file)
        return self.parsesuite(file.read())

    # --------------------------------------------------------------
    #
    # PRIVATE METHODS
    #

    def compile_node(self, node):
        ### emit a line-number node?
        n = node[0]
        if n == symbol.single_input:
            return self.single_input(node[1:])
        if n == symbol.file_input:
            return self.file_input(node[1:])
        if n == symbol.eval_input:
            return self.eval_input(node[1:])
        if n == symbol.lambdef:
            return self.lambdef(node[1:])
        if n == symbol.funcdef:
            return self.funcdef(node[1:])
        if n == symbol.classdef:
            return self.classdef(node[1:])

        raise error, ('unexpected node type', n)

    def single_input(self, node):
        ### do we want to do anything about being "interactive" ?

        # NEWLINE | simple_stmt | compound_stmt NEWLINE
        n = node[0][0]
        if n != token.NEWLINE:
            return self.com_stmt(node[0])

        return Node('pass')

    def file_input(self, nodelist):
        doc = self.get_docstring(nodelist, symbol.file_input)
        stmts = [ ]
        for node in nodelist:
            if node[0] != token.ENDMARKER and node[0] != token.NEWLINE:
                self.com_append_stmt(stmts, node)
        return Node('module', doc, Node('stmt', stmts))

    def eval_input(self, nodelist):
        # from the built-in function input()
        ### is this sufficient?
        return self.com_node(nodelist[0])

    def funcdef(self, nodelist):
        # funcdef: 'def' NAME parameters ':' suite
        # parameters: '(' [varargslist] ')'

        lineno = nodelist[1][2]
        name   = nodelist[1][1]
        args   = nodelist[2][2]

        if args[0] == symbol.varargslist:
            names, defaults, flags = self.com_arglist(args[1:])
        else:
            names = defaults = ()
            flags = 0
        doc = self.get_docstring(nodelist[4])

        # code for function
        code = self.com_node(nodelist[4])

        n = Node('function', name, names, defaults, flags, doc, code)
        n.lineno = lineno
        return n

    def lambdef(self, nodelist):
        # lambdef: 'lambda' [varargslist] ':' test
        if nodelist[2][0] == symbol.varargslist:
            names, defaults, flags = self.com_arglist(nodelist[2][1:])
        else:
            names = defaults = ()
            flags = 0

        # code for lambda
        code = self.com_node(nodelist[-1])

        n = Node('lambda', names, defaults, flags, code)
        n.lineno = nodelist[1][2]
        return n

    def classdef(self, nodelist):
        # classdef: 'class' NAME ['(' testlist ')'] ':' suite

        name = nodelist[1][1]
        doc = self.get_docstring(nodelist[-1])
        if nodelist[2][0] == token.COLON:
            bases = []
        else:
            bases = self.com_bases(nodelist[3])

        # code for class
        code = self.com_node(nodelist[-1])

        n = Node('class', name, bases, doc, code)
        n.lineno = nodelist[1][2]
        return n

    def stmt(self, nodelist):
        return self.com_stmt(nodelist[0])

    small_stmt = stmt
    flow_stmt = stmt
    compound_stmt = stmt

    def simple_stmt(self, nodelist):
        # small_stmt (';' small_stmt)* [';'] NEWLINE
        stmts = [ ]
        for i in range(0, len(nodelist), 2):
            self.com_append_stmt(stmts, nodelist[i])
        return Node('stmt', stmts)

    def parameters(self, nodelist):
        raise error

    def varargslist(self, nodelist):
        raise error

    def fpdef(self, nodelist):
        raise error

    def fplist(self, nodelist):
        raise error

    def dotted_name(self, nodelist):
        raise error

    def comp_op(self, nodelist):
        raise error

    def trailer(self, nodelist):
        raise error

    def sliceop(self, nodelist):
        raise error

    def argument(self, nodelist):
        raise error

    # --------------------------------------------------------------
    #
    # STATEMENT NODES  (invoked by com_node())
    #

    def expr_stmt(self, nodelist):
        # testlist ('=' testlist)*
        exprNode = self.com_node(nodelist[-1])
        if len(nodelist) == 1:
            return Node('discard', exprNode)
        nodes = [ ]
        for i in range(0, len(nodelist) - 2, 2):
            nodes.append(self.com_assign(nodelist[i], OP_ASSIGN))
        n = Node('assign', nodes, exprNode)
        n.lineno = nodelist[1][2]
        return n

    def print_stmt(self, nodelist):
        # print: (test ',')* [test]
        items = [ ]
        for i in range(1, len(nodelist), 2):
            items.append(self.com_node(nodelist[i]))
        if nodelist[-1][0] == token.COMMA:
            n = Node('print', items)
            n.lineno = nodelist[0][2]
            return n
        n = Node('printnl', items)
        n.lineno = nodelist[0][2]
        return n

    def del_stmt(self, nodelist):
        return self.com_assign(nodelist[1], OP_DELETE)

    def pass_stmt(self, nodelist):
        # pass:
        n = Node('pass')
        n.lineno = nodelist[0][2]
        return n

    def break_stmt(self, nodelist):
        # break:
        n = Node('break')
        n.lineno = nodelist[0][2]
        return n

    def continue_stmt(self, nodelist):
        # continue
        n = Node('continue')
        n.lineno = nodelist[0][2]
        return n

    def return_stmt(self, nodelist):
        # return: [testlist]
        if len(nodelist) < 2:
            n = Node('return', Node('const', None))
            n.lineno = nodelist[0][2]
            return n
        n = Node('return', self.com_node(nodelist[1]))
        n.lineno = nodelist[0][2]
        return n

    def raise_stmt(self, nodelist):
        # raise: [test [',' test [',' test]]]
        if len(nodelist) > 5:
            expr3 = self.com_node(nodelist[5])
        else:
            expr3 = None
        if len(nodelist) > 3:
            expr2 = self.com_node(nodelist[3])
        else:
            expr2 = None
        if len(nodelist) > 1:
            expr1 = self.com_node(nodelist[1])
        else:
            expr1 = None
        n = Node('raise', expr1, expr2, expr3)
        n.lineno = nodelist[0][2]
        return n

    def import_stmt(self, nodelist):
        # import_stmt: 'import' dotted_as_name (',' dotted_as_name)* |
        # from: 'from' dotted_name 'import'
        #                        ('*' | import_as_name (',' import_as_name)*)
        names = []
        is_as = 0
        if nodelist[0][1] == 'from':
            for i in range(3, len(nodelist), 2):
                names.append(self.com_import_as_name(nodelist[i][1]))
            n = Node('from', self.com_dotted_name(nodelist[1]), names)
            n.lineno = nodelist[0][2]
            return n

        for i in range(1, len(nodelist), 2):
            names.append(self.com_dotted_as_name(nodelist[i]))
        n = Node('import', names)
        n.lineno = nodelist[0][2]
        return n

    def global_stmt(self, nodelist):
        # global: NAME (',' NAME)*
        names = [ ]
        for i in range(1, len(nodelist), 2):
            names.append(nodelist[i][1])
        n = Node('global', names)
        n.lineno = nodelist[0][2]
        return n

    def exec_stmt(self, nodelist):
        # exec_stmt: 'exec' expr ['in' expr [',' expr]]
        expr1 = self.com_node(nodelist[1])
        if len(nodelist) >= 4:
            expr2 = self.com_node(nodelist[3])
            if len(nodelist) >= 6:
                expr3 = self.com_node(nodelist[5])
            else:
                expr3 = None
        else:
            expr2 = expr3 = None

        n = Node('exec', expr1, expr2, expr3)
        n.lineno = nodelist[0][2]
        return n

    def assert_stmt(self, nodelist):
        # 'assert': test, [',' test]
        expr1 = self.com_node(nodelist[1])
        if (len(nodelist) == 4):
            expr2 = self.com_node(nodelist[3])
        else:
            expr2 = Node('name', 'None')
        n = Node('assert', expr1, expr2)
        n.lineno = nodelist[0][2]
        return n

    def if_stmt(self, nodelist):
        # if: test ':' suite ('elif' test ':' suite)* ['else' ':' suite]
        tests = [ ]
        for i in range(0, len(nodelist) - 3, 4):
            testNode = self.com_node(nodelist[i + 1])
            suiteNode = self.com_node(nodelist[i + 3])
            tests.append((testNode, suiteNode))

        if len(nodelist) % 4 == 3:
            elseNode = self.com_node(nodelist[-1])
##      elseNode.lineno = nodelist[-1][1][2]
        else:
            elseNode = None
        n = Node('if', tests, elseNode)
        n.lineno = nodelist[0][2]
        return n

    def while_stmt(self, nodelist):
        # 'while' test ':' suite ['else' ':' suite]

        testNode = self.com_node(nodelist[1])
        bodyNode = self.com_node(nodelist[3])

        if len(nodelist) > 4:
            elseNode = self.com_node(nodelist[6])
        else:
            elseNode = None

        n = Node('while', testNode, bodyNode, elseNode)
        n.lineno = nodelist[0][2]
        return n

    def for_stmt(self, nodelist):
        # 'for' exprlist 'in' exprlist ':' suite ['else' ':' suite]

        assignNode = self.com_assign(nodelist[1], OP_ASSIGN)
        listNode = self.com_node(nodelist[3])
        bodyNode = self.com_node(nodelist[5])

        if len(nodelist) > 8:
            elseNode = self.com_node(nodelist[8])
        else:
            elseNode = None

        n = Node('for', assignNode, listNode, bodyNode, elseNode)
        n.lineno = nodelist[0][2]
        return n

    def try_stmt(self, nodelist):
        # 'try' ':' suite (except_clause ':' suite)+ ['else' ':' suite]
        # | 'try' ':' suite 'finally' ':' suite
        if nodelist[3][0] != symbol.except_clause:
            return self.com_try_finally(nodelist)

        return self.com_try_except(nodelist)

    def suite(self, nodelist):
        # simple_stmt | NEWLINE INDENT NEWLINE* (stmt NEWLINE*)+ DEDENT
        if len(nodelist) == 1:
            return self.com_stmt(nodelist[0])

        stmts = [ ]
        for node in nodelist:
            if node[0] == symbol.stmt:
                self.com_append_stmt(stmts, node)
        return Node('stmt', stmts)

    # --------------------------------------------------------------
    #
    # EXPRESSION NODES  (invoked by com_node())
    #

    def testlist(self, nodelist):
        # testlist: expr (',' expr)* [',']
        # exprlist: expr (',' expr)* [',']
        return self.com_binary('tuple', nodelist)

    exprlist = testlist

    def test(self, nodelist):
        # and_test ('or' and_test)* | lambdef
        if len(nodelist) == 1 and nodelist[0][0] == symbol.lambdef:
            return self.lambdef(nodelist[0])
        return self.com_binary('or', nodelist)

    def and_test(self, nodelist):
        # not_test ('and' not_test)*
        return self.com_binary('and', nodelist)

    def not_test(self, nodelist):
        # 'not' not_test | comparison
        result = self.com_node(nodelist[-1])
        if len(nodelist) == 2:
            n = Node('not', result)
            n.lineno = nodelist[0][2]
            return n
        return result

    def comparison(self, nodelist):
        # comparison: expr (comp_op expr)*
        node = self.com_node(nodelist[0])
        if len(nodelist) == 1:
            return node

        results = [ ]
        for i in range(2, len(nodelist), 2):
            nl = nodelist[i-1]

            # comp_op: '<' | '>' | '=' | '>=' | '<=' | '<>' | '!=' | '=='
            #          | 'in' | 'not' 'in' | 'is' | 'is' 'not'
            n = nl[1]
            if n[0] == token.NAME:
                type = n[1]
                if len(nl) == 3:
                    if type == 'not':
                        type = 'not in'
                    else:
                        type = 'is not'
            else:
                type = _cmp_types[n[0]]

            lineno = nl[1][2]
            results.append((type, self.com_node(nodelist[i])))

        # we need a special "compare" node so that we can distinguish
        #   3 < x < 5   from    (3 < x) < 5
        # the two have very different semantics and results (note that the
        # latter form is always true)

        n = Node('compare', node, results)
        n.lineno = lineno
        return n

    def expr(self, nodelist):
        # xor_expr ('|' xor_expr)*
        return self.com_binary('bitor', nodelist)

    def xor_expr(self, nodelist):
        # xor_expr ('^' xor_expr)*
        return self.com_binary('bitxor', nodelist)

    def and_expr(self, nodelist):
        # xor_expr ('&' xor_expr)*
        return self.com_binary('bitand', nodelist)

    def shift_expr(self, nodelist):
        # shift_expr ('<<'|'>>' shift_expr)*
        node = self.com_node(nodelist[0])
        for i in range(2, len(nodelist), 2):
            right = self.com_node(nodelist[i])
            if nodelist[i-1][0] == token.LEFTSHIFT:
                node = Node('<<', [node, right])
                node.lineno = nodelist[1][2]
            else:
                node = Node('>>', [node, right])
                node.lineno = nodelist[1][2]
        return node

    def arith_expr(self, nodelist):
        node = self.com_node(nodelist[0])
        for i in range(2, len(nodelist), 2):
            right = self.com_node(nodelist[i])
            if nodelist[i-1][0] == token.PLUS:
                node = Node('+', [node, right])
                node.lineno = nodelist[1][2]
            else:
                node = Node('-', [node, right])
                node.lineno = nodelist[1][2]
        return node

    def term(self, nodelist):
        node = self.com_node(nodelist[0])
        for i in range(2, len(nodelist), 2):
            right = self.com_node(nodelist[i])
            if nodelist[i-1][0] == token.STAR:
                node = Node('*', [node, right])
                node.lineno = nodelist[1][2]
            elif nodelist[i-1][0] == token.SLASH:
                node = Node('/', [node, right])
                node.lineno = nodelist[1][2]
            else:
                node = Node('%', [node, right])
                node.lineno = nodelist[1][2]
        return node

    def factor(self, nodelist):
        t = nodelist[0][0]
        node = self.com_node(nodelist[-1])
        if t == token.PLUS:
            node = Node('unary+', node)
            node.lineno = nodelist[0][2]
        elif t == token.MINUS:
            node = Node('unary-', node)
            node.lineno = nodelist[0][2]
        elif t == token.TILDE:
            node = Node('invert', node)
            node.lineno = nodelist[0][2]
        return node

    def power(self, nodelist):
        # power: atom trailer* ('**' factor)*
        node = self.com_node(nodelist[0])
        for i in range(1, len(nodelist)):
            if nodelist[i][0] == token.DOUBLESTAR:
                n = Node('power', [node, self.com_node(nodelist[i+1])])
                n.lineno = nodelist[i][2]
                return n

            node = self.com_apply_trailer(node, nodelist[i])

        return node

    def atom(self, nodelist):
        t = nodelist[0][0]
        if t == token.LPAR:
            if nodelist[1][0] == token.RPAR:
                n = Node('tuple', ())
                n.lineno = nodelist[0][2]
                return n
            return self.com_node(nodelist[1])

        if t == token.LSQB:
            if nodelist[1][0] == token.RSQB:
                n = Node('list', ())
                n.lineno = nodelist[0][2]
                return n
            return self.com_list_constructor(nodelist[1])

        if t == token.LBRACE:
            if nodelist[1][0] == token.RBRACE:
                return Node('dict', ())
            return self.com_dictmaker(nodelist[1])

        if t == token.BACKQUOTE:
            n = Node('backquote', self.com_node(nodelist[1]))
            n.lineno = nodelist[0][2]
            return n

        if t == token.NUMBER:
            ### need to verify this matches compile.c
            k = eval(nodelist[0][1])
            n = Node('const', k)
            n.lineno = nodelist[0][2]
            return n

        if t == token.STRING:
            ### need to verify this matches compile.c
            k = ''
            for node in nodelist:
                k = k + eval(node[1])
            n = Node('const', k)
            n.lineno = nodelist[0][2]
            return n

        if t == token.NAME:
            ### any processing to do?
            n = Node('name', nodelist[0][1])
            n.lineno = nodelist[0][2]
            return n

        raise error, "unknown node type"

    # --------------------------------------------------------------
    #
    # INTERNAL PARSING UTILITIES
    #

    def com_node(self, node):
        # Note: compile.c has handling in com_node for del_stmt, pass_stmt,
        #       break_stmt, stmt, small_stmt, flow_stmt, simple_stmt,
        #       and compound_stmt.
        #       We'll just dispatch them.

        #
        # A ';' at the end of a line can make a NEWLINE token appear here,
        # Render it harmless. (genc discards ('discard', ('const', xxxx)) Nodes)
        # 
        if node[0] == token.NEWLINE:
            return Node('discard', Node('const', None))

        if node[0] not in _legal_node_types:
            raise error, 'illegal node passed to com_node: %s' % node[0]

#    print "dispatch", self._dispatch[node[0]].__name__, node
        return self._dispatch[node[0]](node[1:])

    def com_arglist(self, nodelist):
        # varargslist:
        #   (fpdef ['=' test] ',')* ('*' NAME [',' ('**'|'*' '*') NAME]
        #  | fpdef ['=' test] (',' fpdef ['=' test])* [',']
        #  | ('**'|'*' '*') NAME)
        # fpdef: NAME | '(' fplist ')'
        # fplist: fpdef (',' fpdef)* [',']
        names = [ ]
        defaults = [ ]
        flags = 0

        i = 0
        while i < len(nodelist):
            node = nodelist[i]
            if node[0] == token.STAR or node[0] == token.DOUBLESTAR:
                if node[0] == token.STAR:
                    node = nodelist[i+1]
                    if node[0] == token.NAME:
                        names.append(node[1])
                        flags = flags | CO_VARARGS
                        i = i + 3

                if i < len(nodelist):
                    # should be DOUBLESTAR or STAR STAR
                    if nodelist[i][0] == token.DOUBLESTAR:
                        node = nodelist[i+1]
                    else:
                        node = nodelist[i+2]
                    names.append(node[1])
                    flags = flags | CO_VARKEYWORDS

                break

            # fpdef: NAME | '(' fplist ')'
            names.append(self.com_fpdef(node))

            i = i + 1
            if i >= len(nodelist):
                break

            if nodelist[i][0] == token.EQUAL:
                defaults.append(self.com_node(nodelist[i + 1]))
                i = i + 2
            elif len(defaults):
                # Treat "(a=1, b)" as "(a=1, b=None)"
                defaults.append(Node('const', None))

            i = i + 1

        return names, defaults, flags

    def com_fpdef(self, node):
        # fpdef: NAME | '(' fplist ')'
        if node[1][0] == token.LPAR:
            return self.com_fplist(node[2])
        return node[1][1]

    def com_fplist(self, node):
        # fplist: fpdef (',' fpdef)* [','] 
        if len(node) == 2:
            return self.com_fpdef(node[1])
        list = [ ]
        for i in range(1, len(node), 2):
            list.append(self.com_fpdef(node[i]))
        return tuple(list)

    def com_dotted_name(self, node):
        # String together the dotted names and return the string
        name = ""
        for n in node:
            if type(n) == type(()) and n[0] == 1:
                name = name + n[1] + '.'
        return name[:-1]

    def com_dotted_as_name(self, node):
        dot = self.com_dotted_name(node[1])
        if len(node) == 2:
            return dot, None
        assert node[2][1] == 'as'
        assert node[3][0] == token.NAME
        return dot, node[3][1]

    def com_import_as_name(self, node):
        if node[0] == token.NAME:
            return node[1], None
        assert len(node) == 4
        assert node[2][1] == 'as'
        assert node[3][0] == token.NAME
        return node[1][1], node[3][1]

    def com_bases(self, node):
        bases = [ ]
        for i in range(1, len(node), 2):
            bases.append(self.com_node(node[i]))
        return bases

    def com_try_finally(self, nodelist):
        # try_fin_stmt: "try" ":" suite "finally" ":" suite
        n = Node('tryfinally', self.com_node(nodelist[2]), self.com_node(nodelist[5]))
        n.lineno = nodelist[0][2]
        return n

    def com_try_except(self, nodelist):
        # try_except: 'try' ':' suite (except_clause ':' suite)* ['else' suite]
        #tryexcept:  [TryNode, [except_clauses], elseNode)]
        stmt = self.com_node(nodelist[2])
        clauses = []
        elseNode = None
        for i in range(3, len(nodelist), 3):
            node = nodelist[i]
            if node[0] == symbol.except_clause:
                # except_clause: 'except' [expr [',' expr]] */
                if len(node) > 2:
                    expr1 = self.com_node(node[2])
                    if len(node) > 4:
                        expr2 = self.com_assign(node[4], OP_ASSIGN)
                    else:
                        expr2 = None
                else:
                    expr1 = expr2 = None
                clauses.append((expr1, expr2, self.com_node(nodelist[i+2])))

            if node[0] == token.NAME:
                elseNode = self.com_node(nodelist[i+2])
        n = Node('tryexcept', self.com_node(nodelist[2]), clauses, elseNode)
        n.lineno = nodelist[0][2]
        return n

    def com_assign(self, node, assigning):
        # return a node suitable for use as an "lvalue"
        # loop to avoid trivial recursion
        while 1:
            t = node[0]
            if t == symbol.exprlist or t == symbol.testlist:
                if len(node) > 2:
                    return self.com_assign_tuple(node, assigning)
                node = node[1]
            elif t in _assign_types:
                if len(node) > 2:
                    raise SyntaxError, "can't assign to operator"
                node = node[1]
            elif t == symbol.power:
                if node[1][0] != symbol.atom:
                    raise SyntaxError, "can't assign to operator"
                if len(node) > 2:
                    primary = self.com_node(node[1])
                    for i in range(2, len(node)-1):
                        ch = node[i]
                        if ch[0] == token.DOUBLESTAR:
                            raise SyntaxError, "can't assign to operator"
                        primary = self.com_apply_trailer(primary, ch)
                    return self.com_assign_trailer(primary, node[-1], assigning)
                node = node[1]
            elif t == symbol.atom:
                t = node[1][0]
                if t == token.LPAR:
                    node = node[2]
                    if node[0] == token.RPAR:
                        raise SyntaxError, "can't assign to ()"
                elif t == token.LSQB:
                    node = node[2]
                    if node[0] == token.RSQB:
                        raise SyntaxError, "can't assign to []"
                    return self.com_assign_list(node, assigning)
                elif t == token.NAME:
                    return self.com_assign_name(node[1], assigning)
                else:
                    raise SyntaxError, "can't assign to literal"
            else:
                raise SyntaxError, "bad assignment"

    def com_assign_tuple(self, node, assigning):
        assigns = [ ]
        for i in range(1, len(node), 2):
            assigns.append(self.com_assign(node[i], assigning))
        return Node('ass_tuple', assigns)

    def com_assign_list(self, node, assigning):
        assigns = [ ]
        for i in range(1, len(node), 2):
            assigns.append(self.com_assign(node[i], assigning))
        return Node('ass_list', assigns)

    def com_assign_name(self, node, assigning):
        n = Node('ass_name', node[1], assigning)
        n.lineno = node[2]
        return n

    def com_assign_trailer(self, primary, node, assigning):
        t = node[1][0]
        if t == token.LPAR:
            raise SyntaxError, "can't assign to function call"
        if t == token.DOT:
            return self.com_assign_attr(primary, node[2], assigning)
        if t == token.LSQB:
            return self.com_subscriptlist(primary, node[2], assigning)
        raise SyntaxError, "unknown trailer type: %s" % t

    def com_assign_attr(self, primary, node, assigning):
        return Node('ass_attr', primary, node[1], assigning)

    def com_binary(self, type, nodelist):
        "Compile 'NODE (OP NODE)*' into (type, [ node1, ..., nodeN ])."
        if len(nodelist) == 1:
            return self.com_node(nodelist[0])
        items = [ ]
        for i in range(0, len(nodelist), 2):
            items.append(self.com_node(nodelist[i]))
        return Node(type, items)

    def com_stmt(self, node):
        #pprint.pprint(node)
        result = self.com_node(node)
        try:
            result[0]
        except:
            print node[0]
        if result[0] == 'stmt':
            return result
        return Node('stmt', [ result ])

    def com_append_stmt(self, stmts, node):
        result = self.com_node(node)
        try:
            result[0]
        except:
            print node
        if result[0] == 'stmt':
            stmts[len(stmts):] = result[1]
        else:
            stmts.append(result)

    def com_list_constructor(self, nodelist):
        values = [ ]
        for i in range(1, len(nodelist), 2):
            values.append(self.com_node(nodelist[i]))
        return Node('list', values)

    def com_dictmaker(self, nodelist):
        # dictmaker: test ':' test (',' test ':' value)* [',']
        items = [ ]
        for i in range(1, len(nodelist), 4):
            items.append((self.com_node(nodelist[i]), self.com_node(nodelist[i+2])))
        return Node('dict', items)

    def com_apply_trailer(self, primaryNode, nodelist):
        t = nodelist[1][0]
        if t == token.LPAR:
            return self.com_call_function(primaryNode, nodelist[2])
        if t == token.DOT:
            return self.com_select_member(primaryNode, nodelist[2])
        if t == token.LSQB:
            return self.com_subscriptlist(primaryNode, nodelist[2], OP_APPLY)

        raise SyntaxError, 'unknown node type: %s' % t

    def com_select_member(self, primaryNode, nodelist):
        if nodelist[0] != token.NAME:
            raise SyntaxError, "member must be a name"
        n = Node('getattr', primaryNode, nodelist[1])
        n.lineno = nodelist[2]
        return n

    def com_call_function(self, primaryNode, nodelist):
        if nodelist[0] == token.RPAR:
            return Node('call_func', primaryNode, [ ])
        args = [ ]
        kw = 0
        len_nodelist = len(nodelist)
        for i in range(1, len_nodelist, 2):
            node = nodelist[i]
            if node[0] == token.STAR or node[0] == token.DOUBLESTAR:
                    break
            kw, result = self.com_argument(node, kw)
            args.append(result)
        else:
                i = i + 1 # No broken by star arg, so skip the last one we processed.
        if i < len_nodelist and nodelist[i][0] == token.COMMA:
                # need to accept an application that looks like "f(a, b,)"
                i = i + 1
        star_node = dstar_node = None
        while i < len_nodelist:
                tok = nodelist[i]
                ch = nodelist[i+1]
                i = i + 3
                if tok[0]==token.STAR:
                        if star_node is not None:
                                raise SyntaxError, 'already have the varargs indentifier'
                        star_node = self.com_node(ch)
                elif tok[0]==token.DOUBLESTAR:
                        if dstar_node is not None:
                                raise SyntaxError, 'already have the kwargs indentifier'
                        dstar_node = self.com_node(ch)
                else:
                        raise SyntaxError, 'unknown node type: %s' % tok

        return Node('call_func', primaryNode, args, star_node, dstar_node)

    def com_argument(self, nodelist, kw):
        if len(nodelist) == 2:
            if kw:
                raise SyntaxError, "non-keyword arg after keyword arg"
            return 0, self.com_node(nodelist[1])
        result = self.com_node(nodelist[3])
        n = nodelist[1]
        while len(n) == 2 and n[0] != token.NAME:
            n = n[1]
        if n[0] != token.NAME:
            raise SyntaxError, "keyword can't be an expression (%s)"%n[0]
        node = Node('keyword', n[1], result)
        node.lineno = n[2]
        return 1, node

    def com_subscriptlist(self, primary, nodelist, assigning):
        # slicing:      simple_slicing | extended_slicing
        # simple_slicing:   primary "[" short_slice "]"
        # extended_slicing: primary "[" slice_list "]" 
        # slice_list:   slice_item ("," slice_item)* [","]

        # backwards compat slice for '[i:j]'
        if len(nodelist) == 2:
            sub = nodelist[1]
            if (sub[1][0] == token.COLON or \
                            (len(sub) > 2 and sub[2][0] == token.COLON)) and \
                            sub[-1][0] != symbol.sliceop:
                return self.com_slice(primary, sub, assigning)

        subscripts = [ ]
        for i in range(1, len(nodelist), 2):
            subscripts.append(self.com_subscript(nodelist[i]))

        return Node('subscript', primary, assigning, subscripts)

    def com_subscript(self, node):
        # slice_item: expression | proper_slice | ellipsis
        ch = node[1]
        if ch[0] == token.DOT and node[2][0] == token.DOT:
            return Node('ellipsis')
        if ch[0] == token.COLON or len(node) > 2:
            return self.com_sliceobj(node)
        return self.com_node(ch)

    def com_sliceobj(self, node):
        # proper_slice: short_slice | long_slice
        # short_slice:  [lower_bound] ":" [upper_bound]
        # long_slice:   short_slice ":" [stride]
        # lower_bound:  expression
        # upper_bound:  expression
        # stride:       expression
        #
        # Note: a stride may be further slicing...

        items = [ ]

        if node[1][0] == token.COLON:
            items.append(Node('const', None))
            i = 2
        else:
            items.append(self.com_node(node[1]))
            # i == 2 is a COLON
            i = 3

        if i < len(node) and node[i][0] == symbol.test:
            items.append(self.com_node(node[i]))
            i = i + 1
        else:
            items.append(Node('const', None))

        # a short_slice has been built. look for long_slice now by looking
        # for strides...
        for j in range(i, len(node)):
            ch = node[j]
            if len(ch) == 2:
                items.append(Node('const', None))
            else:
                items.append(self.com_node(ch[2]))

        return Node('sliceobj', items)

    def com_slice(self, primary, node, assigning):
        # short_slice:  [lower_bound] ":" [upper_bound]
        lower = upper = None
        if len(node) == 3:
            if node[1][0] == token.COLON:
                upper = self.com_node(node[2])
            else:
                lower = self.com_node(node[1])
        elif len(node) == 4:
            lower = self.com_node(node[1])
            upper = self.com_node(node[3])
        return Node('slice', primary, assigning, lower, upper)

    def get_docstring(self, node, n=None):
        if n is None:
            n = node[0]
            node = node[1:]
        if n == symbol.suite:
            if len(node) == 1:
                return self.get_docstring(node[0])
            for sub in node:
                if sub[0] == symbol.stmt:
                    return self.get_docstring(sub)
            return None
        if n == symbol.file_input:
            for sub in node:
                if sub[0] == symbol.stmt:
                    return self.get_docstring(sub)
            return None
        if n == symbol.atom:
            if node[0][0] == token.STRING:
                s = ''
                for t in node:
                    s = s + eval(t[1])
                return s
            return None
        if n == symbol.stmt or n == symbol.simple_stmt or n == symbol.small_stmt:
            return self.get_docstring(node[0])
        if n in _doc_nodes and len(node) == 1:
            return self.get_docstring(node[0])
        return None


_doc_nodes = [
    symbol.expr_stmt,
    symbol.testlist,
    symbol.test,
    symbol.and_test,
    symbol.not_test,
    symbol.comparison,
    symbol.expr,
    symbol.xor_expr,
    symbol.and_expr,
    symbol.shift_expr,
    symbol.arith_expr,
    symbol.term,
    symbol.factor,
    symbol.power,
    ]

# comp_op: '<' | '>' | '=' | '>=' | '<=' | '<>' | '!=' | '=='
#             | 'in' | 'not' 'in' | 'is' | 'is' 'not'
_cmp_types = {
    token.LESS : '<',
    token.GREATER : '>',
    token.EQEQUAL : '==',
    token.EQUAL : '==',
    token.LESSEQUAL : '<=',
    token.GREATEREQUAL : '>=',
    token.NOTEQUAL : '!=',
    }

_legal_node_types = [
    symbol.funcdef,
    symbol.classdef,
    symbol.stmt,
    symbol.small_stmt,
    symbol.flow_stmt,
    symbol.simple_stmt,
    symbol.compound_stmt,
    symbol.expr_stmt,
    symbol.print_stmt,
    symbol.del_stmt,
    symbol.pass_stmt,
    symbol.break_stmt,
    symbol.continue_stmt,
    symbol.return_stmt,
    symbol.raise_stmt,
    symbol.import_stmt,
    symbol.global_stmt,
    symbol.exec_stmt,
    symbol.assert_stmt,
    symbol.if_stmt,
    symbol.while_stmt,
    symbol.for_stmt,
    symbol.try_stmt,
    symbol.suite,
    symbol.testlist,
    symbol.test,
    symbol.and_test,
    symbol.not_test,
    symbol.comparison,
    symbol.exprlist,
    symbol.expr,
    symbol.xor_expr,
    symbol.and_expr,
    symbol.shift_expr,
    symbol.arith_expr,
    symbol.term,
    symbol.factor,
    symbol.power,
    symbol.atom,
    ]

_assign_types = [
    symbol.test,
    symbol.and_test,
    symbol.not_test,
    symbol.comparison,
    symbol.expr,
    symbol.xor_expr,
    symbol.and_expr,
    symbol.shift_expr,
    symbol.arith_expr,
    symbol.term,
    symbol.factor,
    ]