Doc/library/asyncio-stream.rst

.. currentmodule:: asyncio

.. _asyncio-streams:

=======
Streams
=======

Streams are high-level async/await-ready primitives to work with
network connections.  Streams allow sending and receiving data without
using callbacks or low-level protocols and transports.

Here is an example of a TCP echo client written using asyncio
streams::

    import asyncio

    async def tcp_echo_client(message):
        reader, writer = await asyncio.open_connection(
            '127.0.0.1', 8888)

        print(f'Send: {message!r}')
        writer.write(message.encode())

        data = await reader.read(100)
        print(f'Received: {data.decode()!r}')

        print('Close the connection')
        writer.close()

    asyncio.run(tcp_echo_client('Hello World!'))


See also the `Examples`_ section below.


.. rubric:: Stream Functions

The following top-level asyncio functions can be used to create
and work with streams:


.. coroutinefunction:: open_connection(host=None, port=None, \*, \
                          loop=None, limit=None, ssl=None, family=0, \
                          proto=0, flags=0, sock=None, local_addr=None, \
                          server_hostname=None, ssl_handshake_timeout=None)

   Establish a network connection and return a pair of
   ``(reader, writer)`` objects.

   The returned *reader* and *writer* objects are instances of
   :class:`StreamReader` and :class:`StreamWriter` classes.

   The *loop* argument is optional and can always be determined
   automatically when this method is awaited from a coroutine.

   *limit* determines the buffer size limit used by the
   returned :class:`StreamReader` instance.  By default the *limit*
   is set to 64 KiB.

   The rest of the arguments are passed directly to
   :meth:`loop.create_connection`.

   .. versionadded:: 3.7

      The *ssl_handshake_timeout* parameter.

.. coroutinefunction:: start_server(client_connected_cb, host=None, \
                          port=None, \*, loop=None, limit=None, \
                          family=socket.AF_UNSPEC, \
                          flags=socket.AI_PASSIVE, sock=None, \
                          backlog=100, ssl=None, reuse_address=None, \
                          reuse_port=None, ssl_handshake_timeout=None, \
                          start_serving=True)

   Start a socket server.

   The *client_connected_cb* callback is called whenever a new client
   connection is established.  It receives a ``(reader, writer)`` pair
   as two arguments, instances of the :class:`StreamReader` and
   :class:`StreamWriter` classes.

   *client_connected_cb* can be a plain callable or a
   :ref:`coroutine function <coroutine>`; if it is a coroutine function,
   it will be automatically wrapped into a :class:`Task`.

   The *loop* argument is optional and can always be determined
   automatically when this method is awaited from a coroutine.

   *limit* determines the buffer size limit used by the
   returned :class:`StreamReader` instance.  By default the *limit*
   is set to 64 KiB.

   The rest of the arguments are passed directly to
   :meth:`loop.create_server`.

   .. versionadded:: 3.7

      The *ssl_handshake_timeout* and *start_serving* parameters.


.. rubric:: Unix Sockets

.. coroutinefunction:: open_unix_connection(path=None, \*, loop=None, \
                        limit=None, ssl=None, sock=None, \
                        server_hostname=None, ssl_handshake_timeout=None)

   Establish a UNIX socket connection and return a pair of
   ``(reader, writer)``.

   Similar to :func:`open_connection` but operates on UNIX sockets.

   See also the documentation of :meth:`loop.create_unix_connection`.

   Availability: UNIX.

   .. versionadded:: 3.7

      The *ssl_handshake_timeout* parameter.

   .. versionchanged:: 3.7

      The *path* parameter can now be a :term:`path-like object`


.. coroutinefunction:: start_unix_server(client_connected_cb, path=None, \
                          \*, loop=None, limit=None, sock=None, \
                          backlog=100, ssl=None, ssl_handshake_timeout=None, \
                          start_serving=True)

   Start a UNIX socket server.

   Similar to :func:`start_server` but works with UNIX sockets.

   See also the documentation of :meth:`loop.create_unix_server`.

   Availability: UNIX.

   .. versionadded:: 3.7

      The *ssl_handshake_timeout* and *start_serving* parameters.

   .. versionchanged:: 3.7

      The *path* parameter can now be a :term:`path-like object`.


---------


StreamReader
============

.. class:: StreamReader

   Represents a reader object that provides APIs to read data
   from the IO stream.

   It is not recommended to instantiate *StreamReader* objects
   directly; use :func:`open_connection` and :func:`start_server`
   instead.

   .. coroutinemethod:: read(n=-1)

      Read up to *n* bytes.  If *n* is not provided, or set to ``-1``,
      read until EOF and return all read bytes.

      If an EOF was received and the internal buffer is empty,
      return an empty ``bytes`` object.

   .. coroutinemethod:: readline()

      Read one line, where "line" is a sequence of bytes
      ending with ``\n``.

      If an EOF is received and ``\n`` was not found, the method
      returns partially read data.

      If an EOF is received and the internal buffer is empty,
      return an empty ``bytes`` object.

   .. coroutinemethod:: readexactly(n)

      Read exactly *n* bytes.

      Raise an :exc:`IncompleteReadError` if an EOF reached before *n*
      can be read.  Use the :attr:`IncompleteReadError.partial`
      attribute to get the partially read data.

   .. coroutinemethod:: readuntil(separator=b'\\n')

      Read data from the stream until ``separator`` is found.

      On success, the data and separator will be removed from the
      internal buffer (consumed). Returned data will include the
      separator at the end.

      Configured stream limit is used to check result. Limit sets the
      maximal length of data that can be returned, not counting the
      separator.

      If an EOF occurs and the complete separator is still not found,
      an :exc:`IncompleteReadError` exception will be
      raised, and the internal buffer will be reset.  The
      :attr:`IncompleteReadError.partial` attribute may contain the
      separator partially.

      If the data cannot be read because of over limit, a
      :exc:`LimitOverrunError` exception  will be raised, and the data
      will be left in the internal buffer, so it can be read again.

      .. versionadded:: 3.5.2

   .. method:: at_eof()

      Return ``True`` if the buffer is empty and :meth:`feed_eof`
      was called.


StreamWriter
============

.. class:: StreamWriter

   Represents a writer object that provides APIs to write data
   to the IO stream.

   It is not recommended to instantiate *StreamWriter* objects
   directly; use :func:`open_connection` and :func:`start_server`
   instead.

   .. method:: write(data)

      Write *data* to the stream.

   .. method:: writelines(data)

      Write a list (or any iterable) of bytes to the stream.

   .. coroutinemethod:: drain()

      Wait until it is appropriate to resume writing to the stream.
      E.g.::

          writer.write(data)
          await writer.drain()

      This is a flow-control method that interacts with the underlying
      IO write buffer.  When the size of the buffer reaches
      the high-water limit, *drain()* blocks until the size of the
      buffer is drained down to the low-water limit and writing can
      be resumed.  When there is nothing to wait for, the :meth:`drain`
      returns immediately.

   .. method:: close()

      Close the stream.

   .. method:: is_closing()

      Return ``True`` if the stream is closed or in the process of
      being closed.

      .. versionadded:: 3.7

   .. coroutinemethod:: wait_closed()

      Wait until the stream is closed.

      Should be called after :meth:`close` to wait until the underlying
      connection is closed.

      .. versionadded:: 3.7

   .. method:: can_write_eof()

      Return *True* if the underlying transport supports
      the :meth:`write_eof` method, *False* otherwise.

   .. method:: write_eof()

      Close the write end of the stream after the buffered write
      data is flushed.

   .. attribute:: transport

      Return the underlying asyncio transport.

   .. method:: get_extra_info(name, default=None)

      Access optional transport information; see
      :meth:`BaseTransport.get_extra_info` for details.


Examples
========

.. _asyncio-tcp-echo-client-streams:

TCP echo client using streams
-----------------------------

TCP echo client using the :func:`asyncio.open_connection` function::

    import asyncio

    async def tcp_echo_client(message):
        reader, writer = await asyncio.open_connection(
            '127.0.0.1', 8888)

        print(f'Send: {message!r}')
        writer.write(message.encode())

        data = await reader.read(100)
        print(f'Received: {data.decode()!r}')

        print('Close the connection')
        writer.close()

    asyncio.run(tcp_echo_client('Hello World!'))


.. seealso::

   The :ref:`TCP echo client protocol <asyncio-tcp-echo-client-protocol>`
   example uses the low-level :meth:`loop.create_connection` method.


.. _asyncio-tcp-echo-server-streams:

TCP echo server using streams
-----------------------------

TCP echo server using the :func:`asyncio.start_server` function::

    import asyncio

    async def handle_echo(reader, writer):
        data = await reader.read(100)
        message = data.decode()
        addr = writer.get_extra_info('peername')

        print(f"Received {message!r} from {addr!r}")

        print(f"Send: {message!r}")
        writer.write(data)
        await writer.drain()

        print("Close the connection")
        writer.close()

    async def main():
        server = await asyncio.start_server(
            handle_echo, '127.0.0.1', 8888)

        addr = server.sockets[0].getsockname()
        print(f'Serving on {addr}')

        async with server:
            await server.serve_forever()

    asyncio.run(main())


.. seealso::

   The :ref:`TCP echo server protocol <asyncio-tcp-echo-server-protocol>`
   example uses the :meth:`loop.create_server` method.


Get HTTP headers
----------------

Simple example querying HTTP headers of the URL passed on the command line::

    import asyncio
    import urllib.parse
    import sys

    async def print_http_headers(url):
        url = urllib.parse.urlsplit(url)
        if url.scheme == 'https':
            reader, writer = await asyncio.open_connection(
                url.hostname, 443, ssl=True)
        else:
            reader, writer = await asyncio.open_connection(
                url.hostname, 80)

        query = (
            f"HEAD {url.path or '/'} HTTP/1.0\r\n"
            f"Host: {url.hostname}\r\n"
            f"\r\n"
        )

        writer.write(query.encode('latin-1'))
        while True:
            line = await reader.readline()
            if not line:
                break

            line = line.decode('latin1').rstrip()
            if line:
                print(f'HTTP header> {line}')

        # Ignore the body, close the socket
        writer.close()

    url = sys.argv[1]
    asyncio.run(print_http_headers(url))


Usage::

    python example.py http://example.com/path/page.html

or with HTTPS::

    python example.py https://example.com/path/page.html


.. _asyncio-register-socket-streams:

Register an open socket to wait for data using streams
------------------------------------------------------

Coroutine waiting until a socket receives data using the
:func:`open_connection` function::

    import asyncio
    import socket

    async def wait_for_data():
        # Get a reference to the current event loop because
        # we want to access low-level APIs.
        loop = asyncio.get_running_loop()

        # Create a pair of connected sockets.
        rsock, wsock = socket.socketpair()

        # Register the open socket to wait for data.
        reader, writer = await asyncio.open_connection(sock=rsock)

        # Simulate the reception of data from the network
        loop.call_soon(wsock.send, 'abc'.encode())

        # Wait for data
        data = await reader.read(100)

        # Got data, we are done: close the socket
        print("Received:", data.decode())
        writer.close()

        # Close the second socket
        wsock.close()

    asyncio.run(wait_for_data())

.. seealso::

   The :ref:`register an open socket to wait for data using a protocol
   <asyncio-register-socket>` example uses a low-level protocol and
   the :meth:`loop.create_connection` method.

   The :ref:`watch a file descriptor for read events
   <asyncio-watch-read-event>` example uses the low-level
   :meth:`loop.add_reader` method to watch a file descriptor.