Doc/whatsnew/3.10.rst

****************************
  What's New In Python 3.10
****************************

:Release: |release|
:Date: |today|

.. Rules for maintenance:

   * Anyone can add text to this document.  Do not spend very much time
   on the wording of your changes, because your text will probably
   get rewritten to some degree.

   * The maintainer will go through Misc/NEWS periodically and add
   changes; it's therefore more important to add your changes to
   Misc/NEWS than to this file.

   * This is not a complete list of every single change; completeness
   is the purpose of Misc/NEWS.  Some changes I consider too small
   or esoteric to include.  If such a change is added to the text,
   I'll just remove it.  (This is another reason you shouldn't spend
   too much time on writing your addition.)

   * If you want to draw your new text to the attention of the
   maintainer, add 'XXX' to the beginning of the paragraph or
   section.

   * It's OK to just add a fragmentary note about a change.  For
   example: "XXX Describe the transmogrify() function added to the
   socket module."  The maintainer will research the change and
   write the necessary text.

   * You can comment out your additions if you like, but it's not
   necessary (especially when a final release is some months away).

   * Credit the author of a patch or bugfix.   Just the name is
   sufficient; the e-mail address isn't necessary.

   * It's helpful to add the bug/patch number as a comment:

   XXX Describe the transmogrify() function added to the socket
   module.
   (Contributed by P.Y. Developer in :issue:`12345`.)

   This saves the maintainer the effort of going through the Mercurial log
   when researching a change.

This article explains the new features in Python 3.10, compared to 3.9.

For full details, see the :ref:`changelog <changelog>`.

.. note::

   Prerelease users should be aware that this document is currently in draft
   form. It will be updated substantially as Python 3.10 moves towards release,
   so it's worth checking back even after reading earlier versions.


Summary -- Release highlights
=============================

.. This section singles out the most important changes in Python 3.10.
   Brevity is key.


.. PEP-sized items next.



New Features
============

.. _whatsnew310-pep563:

PEP 563: Postponed Evaluation of Annotations Becomes Default
------------------------------------------------------------

In Python 3.7, postponed evaluation of annotations was added,
to be enabled with a ``from __future__ import annotations``
directive.  In 3.10 this became the default behavior, even
without that future directive.  With this being default, all
annotations stored in :attr:`__annotations__` will be strings.
If needed, annotations can be resolved at runtime using
:func:`typing.get_type_hints`.  See :pep:`563` for a full
description.  Also, the :func:`inspect.signature` will try to
resolve types from now on, and when it fails it will fall back to
showing the string annotations.  (Contributed by Batuhan Taskaya
in :issue:`38605`.)

* The :class:`int` type has a new method :meth:`int.bit_count`, returning the
  number of ones in the binary expansion of a given integer, also known
  as the population count. (Contributed by Niklas Fiekas in :issue:`29882`.)

* The views returned by :meth:`dict.keys`, :meth:`dict.values` and
  :meth:`dict.items` now all have a ``mapping`` attribute that gives a
  :class:`types.MappingProxyType` object wrapping the original
  dictionary. (Contributed by Dennis Sweeney in :issue:`40890`.)

* :pep:`618`: The :func:`zip` function now has an optional ``strict`` flag, used
  to require that all the iterables have an equal length.

PEP 613: TypeAlias Annotation
-----------------------------

:pep:`484` introduced the concept of type aliases, only requiring them to be
top-level unannotated assignments. This simplicity sometimes made it difficult
for type checkers to distinguish between type aliases and ordinary assignments,
especially when forward references or invalid types were involved. Compare::

   StrCache = 'Cache[str]'  # a type alias
   LOG_PREFIX = 'LOG[DEBUG]'  # a module constant

Now the :mod:`typing` module has a special annotation :data:`TypeAlias` to
declare type aliases more explicitly::

   StrCache: TypeAlias = 'Cache[str]'  # a type alias
   LOG_PREFIX = 'LOG[DEBUG]'  # a module constant

See :pep:`613` for more details.

(Contributed by Mikhail Golubev in :issue:`41923`.)

PEP604: New Type Union Operator
-------------------------------

A new type union operator was introduced which enables the syntax ``X | Y``.
This provides a cleaner way of expressing 'either type X or type Y' instead of
using :data:`typing.Union`, especially in type hints (annotations).

In previous versions of Python, to apply a type hint for functions accepting
arguments of multiple types, :data:`typing.Union` was used::

   def square(number: Union[int, float]) -> Union[int, float]:
       return number ** 2


Now, type hints can be written in a more succinct manner::

   def square(number: int | float) -> int | float:
       return number ** 2


See :pep:`604` for more details.

(Contributed by Maggie Moss and Philippe Prados in :issue:`41428`.)

Other Language Changes
======================

* Builtin and extension functions that take integer arguments no longer accept
  :class:`~decimal.Decimal`\ s, :class:`~fractions.Fraction`\ s and other
  objects that can be converted to integers only with a loss (e.g. that have
  the :meth:`~object.__int__` method but do not have the
  :meth:`~object.__index__` method).
  (Contributed by Serhiy Storchaka in :issue:`37999`.)


New Modules
===========

* None yet.


Improved Modules
================

base64
------

Add :func:`base64.b32hexencode` and :func:`base64.b32hexdecode` to support the
Base32 Encoding with Extended Hex Alphabet.

codecs
------

Add a :func:`codecs.unregister` function to unregister a codec search function.
(Contributed by Hai Shi in :issue:`41842`.)

curses
------

The extended color functions added in ncurses 6.1 will be used transparently
by :func:`curses.color_content`, :func:`curses.init_color`,
:func:`curses.init_pair`, and :func:`curses.pair_content`. A new function,
:func:`curses.has_extended_color_support`, indicates whether extended color
support is provided by the underlying ncurses library.
(Contributed by Jeffrey Kintscher and Hans Petter Jansson in :issue:`36982`.)

encodings
---------
:func:`encodings.normalize_encoding` now ignores non-ASCII characters.
(Contributed by Hai Shi in :issue:`39337`.)

glob
----

Added the *root_dir* and *dir_fd* parameters in :func:`~glob.glob` and
:func:`~glob.iglob` which allow to specify the root directory for searching.
(Contributed by Serhiy Storchaka in :issue:`38144`.)

os
--

Added :func:`os.cpu_count()` support for VxWorks RTOS.
(Contributed by Peixing Xin in :issue:`41440`.)

py_compile
----------

Added ``--quiet`` option to command-line interface of :mod:`py_compile`.
(Contributed by Gregory Schevchenko in :issue:`38731`.)

shelve
------

The :mod:`shelve` module now uses :data:`pickle.DEFAULT_PROTOCOL` by default
instead of :mod:`pickle` protocol ``3`` when creating shelves.
(Contributed by Zackery Spytz in :issue:`34204`.)

sys
---

Add :data:`sys.orig_argv` attribute: the list of the original command line
arguments passed to the Python executable.
(Contributed by Victor Stinner in :issue:`23427`.)

types
-----

Reintroduced the :data:`types.EllipsisType`, :data:`types.NoneType`
and :data:`types.NotImplementedType` classes, providing a new set
of types readily interpretable by type checkers.
(Contributed by Bas van Beek in :issue:`41810`.)

unittest
--------

Add new method :meth:`~unittest.TestCase.assertNoLogs` to complement the
existing :meth:`~unittest.TestCase.assertLogs`. (Contributed by Kit Yan Choi
in :issue:`39385`.)

xml
---

Add a :class:`~xml.sax.handler.LexicalHandler` class to the
:mod:`xml.sax.handler` module.
(Contributed by Jonathan Gossage and Zackery Spytz in :issue:`35018`.)


Optimizations
=============

* Constructors :func:`str`, :func:`bytes` and :func:`bytearray` are now faster
  (around 30--40% for small objects).
  (Contributed by Serhiy Storchaka in :issue:`41334`.)

* The :mod:`runpy` module now imports fewer modules.
  The ``python3 -m module-name`` command startup time is 1.3x faster in
  average.
  (Contributed by Victor Stinner in :issue:`41006`.)

* The ``LOAD_ATTR`` instruction now uses new "per opcode cache" mechanism.
  It is about 36% faster now.  (Contributed by Pablo Galindo and Yury Selivanov
  in :issue:`42093`.)

* When building Python with ``--enable-optimizations`` now
  ``-fno-semantic-interposition`` is added to both the compile and link line.
  This speeds builds of the Python interpreter created with ``--enable-shared``
  with ``gcc`` by up to 30%. See `this article
  <https://developers.redhat.com/blog/2020/06/25/red-hat-enterprise-linux-8-2-brings-faster-python-3-8-run-speeds/>`_
  for more details. (Contributed by Victor Stinner and Pablo Galindo in
  :issue:`38980`)

Deprecated
==========

* Starting in this release, there will be a concerted effort to begin
  cleaning up old import semantics that were kept for Python 2.7
  compatibility. Specifically,
  :meth:`~importlib.abc.PathEntryFinder.find_loader`/:meth:`~importlib.abc.Finder.find_module`
  (superseded by :meth:`~importlib.abc.Finder.find_spec`),
  :meth:`~importlib.abc.Loader.load_module`
  (superseded by :meth:`~importlib.abc.Loader.exec_module`),
  :meth:`~importlib.abc.Loader.module_repr` (which the import system
  takes care of for you), the ``__package__`` attribute
  (superseded by ``__spec__.parent``), the ``__loader__`` attribute
  (superseded by ``__spec__.loader``), and the ``__cached__`` attribute
  (superseded by ``__spec__.cached``) will slowly be removed (as well
  as other classes and methods in :mod:`importlib`).
  :exc:`ImportWarning` and/or :exc:`DeprecationWarning` will be raised
  as appropriate to help identify code which needs updating during
  this transition.


Removed
=======

* Removed special methods ``__int__``, ``__float__``, ``__floordiv__``,
  ``__mod__``, ``__divmod__``, ``__rfloordiv__``, ``__rmod__`` and
  ``__rdivmod__`` of the :class:`complex` class.  They always raised
  a :exc:`TypeError`.
  (Contributed by Serhiy Storchaka in :issue:`41974`.)

* The ``ParserBase.error()`` method from the private and undocumented ``_markupbase``
  module has been removed.  :class:`html.parser.HTMLParser` is the only subclass of
  ``ParserBase`` and its ``error()`` implementation has already been removed in
  Python 3.5.
  (Contributed by Berker Peksag in :issue:`31844`.)

* Removed the ``unicodedata.ucnhash_CAPI`` attribute which was an internal
  PyCapsule object. The related private ``_PyUnicode_Name_CAPI`` structure was
  moved to the internal C API.
  (Contributed by Victor Stinner in :issue:`42157`.)


Porting to Python 3.10
======================

This section lists previously described changes and other bugfixes
that may require changes to your code.



Build Changes
=============


* The C99 functions :c:func:`snprintf` and :c:func:`vsnprintf` are now required
  to build Python.
  (Contributed by Victor Stinner in :issue:`36020`.)

* :mod:`sqlite3` requires SQLite 3.7.3 or higher.
  (Contributed by Sergey Fedoseev and Erlend E. Aasland :issue:`40744`.)



C API Changes
=============

New Features
------------

* The result of :c:func:`PyNumber_Index` now always has exact type :class:`int`.
  Previously, the result could have been an instance of a subclass of ``int``.
  (Contributed by Serhiy Storchaka in :issue:`40792`.)

* Add a new :c:member:`~PyConfig.orig_argv` member to the :c:type:`PyConfig`
  structure: the list of the original command line arguments passed to the
  Python executable.
  (Contributed by Victor Stinner in :issue:`23427`.)

* The :c:func:`PyDateTime_DATE_GET_TZINFO` and
  :c:func:`PyDateTime_TIME_GET_TZINFO` macros have been added for accessing
  the ``tzinfo`` attributes of :class:`datetime.datetime` and
  :class:`datetime.time` objects.
  (Contributed by Zackery Spytz in :issue:`30155`.)

* Add a :c:func:`PyCodec_Unregister` function to unregister a codec
  search function.
  (Contributed by Hai Shi in :issue:`41842`.)

* The :c:func:`PyIter_Send` function was added to allow
  sending value into iterator without raising ``StopIteration`` exception.
  (Contributed by Vladimir Matveev in :issue:`41756`.)

* Added :c:func:`PyUnicode_AsUTF8AndSize` to the limited C API.
  (Contributed by Alex Gaynor in :issue:`41784`.)


Porting to Python 3.10
----------------------

* The ``PY_SSIZE_T_CLEAN`` macro must now be defined to use
  :c:func:`PyArg_ParseTuple` and :c:func:`Py_BuildValue` formats which use
  ``#``: ``es#``, ``et#``, ``s#``, ``u#``, ``y#``, ``z#``, ``U#`` and ``Z#``.
  See :ref:`Parsing arguments and building values
  <arg-parsing>` and the :pep:`353`.
  (Contributed by Victor Stinner in :issue:`40943`.)

* Since :c:func:`Py_TYPE()` is changed to the inline static function,
  ``Py_TYPE(obj) = new_type`` must be replaced with ``Py_SET_TYPE(obj, new_type)``:
  see :c:func:`Py_SET_TYPE()` (available since Python 3.9). For backward
  compatibility, this macro can be used::

      #if PY_VERSION_HEX < 0x030900A4
      #  define Py_SET_TYPE(obj, type) ((Py_TYPE(obj) = (type)), (void)0)
      #endif

  (Contributed by Dong-hee Na in :issue:`39573`.)

* Since :c:func:`Py_REFCNT()` is changed to the inline static function,
  ``Py_REFCNT(obj) = new_refcnt`` must be replaced with ``Py_SET_REFCNT(obj, new_refcnt)``:
  see :c:func:`Py_SET_REFCNT()` (available since Python 3.9). For backward
  compatibility, this macro can be used::

      #if PY_VERSION_HEX < 0x030900A4
      #  define Py_SET_REFCNT(obj, refcnt) ((Py_REFCNT(obj) = (refcnt)), (void)0)
      #endif

  (Contributed by Victor Stinner in :issue:`39573`.)

* Since :c:func:`Py_SIZE()` is changed to the inline static function,
  ``Py_SIZE(obj) = new_size`` must be replaced with ``Py_SET_SIZE(obj, new_size)``:
  see :c:func:`Py_SET_SIZE()` (available since Python 3.9). For backward
  compatibility, this macro can be used::

      #if PY_VERSION_HEX < 0x030900A4
      #  define Py_SET_SIZE(obj, size) ((Py_SIZE(obj) = (size)), (void)0)
      #endif

  (Contributed by Victor Stinner in :issue:`39573`.)

* Calling :c:func:`PyDict_GetItem` without :term:`GIL` held had been allowed
  for historical reason. It is no longer allowed.
  (Contributed by Victor Stinner in :issue:`40839`.)

* ``PyUnicode_FromUnicode(NULL, size)`` and ``PyUnicode_FromStringAndSize(NULL, size)``
  raise ``DeprecationWarning`` now.  Use :c:func:`PyUnicode_New` to allocate
  Unicode object without initial data.
  (Contributed by Inada Naoki in :issue:`36346`.)

* The private ``_PyUnicode_Name_CAPI`` structure of the PyCapsule API
  ``unicodedata.ucnhash_CAPI`` has been moved to the internal C API.
  (Contributed by Victor Stinner in :issue:`42157`.)

Deprecated
----------

* The ``PyUnicode_InternImmortal()`` function is now deprecated
  and will be removed in Python 3.12: use :c:func:`PyUnicode_InternInPlace`
  instead.
  (Contributed by Victor Stinner in :issue:`41692`.)

Removed
-------

* ``PyObject_AsCharBuffer()``, ``PyObject_AsReadBuffer()``, ``PyObject_CheckReadBuffer()``,
  and ``PyObject_AsWriteBuffer()`` are removed. Please migrate to new buffer protocol;
  :c:func:`PyObject_GetBuffer` and :c:func:`PyBuffer_Release`.
  (Contributed by Inada Naoki in :issue:`41103`.)

* Removed ``Py_UNICODE_str*`` functions manipulating ``Py_UNICODE*`` strings.
  (Contributed by Inada Naoki in :issue:`41123`.)

   * ``Py_UNICODE_strlen``: use :c:func:`PyUnicode_GetLength` or
     :c:macro:`PyUnicode_GET_LENGTH`
   * ``Py_UNICODE_strcat``: use :c:func:`PyUnicode_CopyCharacters` or
     :c:func:`PyUnicode_FromFormat`
   * ``Py_UNICODE_strcpy``, ``Py_UNICODE_strncpy``: use
     :c:func:`PyUnicode_CopyCharacters` or :c:func:`PyUnicode_Substring`
   * ``Py_UNICODE_strcmp``: use :c:func:`PyUnicode_Compare`
   * ``Py_UNICODE_strncmp``: use :c:func:`PyUnicode_Tailmatch`
   * ``Py_UNICODE_strchr``, ``Py_UNICODE_strrchr``: use
     :c:func:`PyUnicode_FindChar`

* Removed ``PyUnicode_GetMax()``. Please migrate to new (:pep:`393`) APIs.
  (Contributed by Inada Naoki in :issue:`41103`.)

* Removed ``PyLong_FromUnicode()``. Please migrate to :c:func:`PyLong_FromUnicodeObject`.
  (Contributed by Inada Naoki in :issue:`41103`.)

* Removed ``PyUnicode_AsUnicodeCopy()``. Please use :c:func:`PyUnicode_AsUCS4Copy` or
  :c:func:`PyUnicode_AsWideCharString`
  (Contributed by Inada Naoki in :issue:`41103`.)

* Removed ``_Py_CheckRecursionLimit`` variable: it has been replaced by
  ``ceval.recursion_limit`` of the :c:type:`PyInterpreterState` structure.
  (Contributed by Victor Stinner in :issue:`41834`.)

* Removed undocumented macros ``Py_ALLOW_RECURSION`` and
  ``Py_END_ALLOW_RECURSION`` and the ``recursion_critical`` field of the
  :c:type:`PyInterpreterState` structure.
  (Contributed by Serhiy Storchaka in :issue:`41936`.)