blob: d2c89711a81acf71f2b56414464df895252e884c [file] [log] [blame]
Barry Warsawc7736b91997-09-04 13:05:14 +00001# -*- makefile -*-
Guido van Rossumb6775db1994-08-01 11:34:53 +00002# The file Setup is used by the makesetup script to construct the files
3# Makefile and config.c, from Makefile.pre and config.c.in,
4# respectively. The file Setup itself is initially copied from
Fred Drakecf3bc8c2000-10-26 17:07:40 +00005# Setup.dist; once it exists it will not be overwritten, so you can edit
Guido van Rossumf4449de1995-04-10 11:37:18 +00006# Setup to your heart's content. Note that Makefile.pre is created
7# from Makefile.pre.in by the toplevel configure script.
Guido van Rossumb6775db1994-08-01 11:34:53 +00008
9# (VPATH notes: Setup and Makefile.pre are in the build directory, as
Fred Drakecf3bc8c2000-10-26 17:07:40 +000010# are Makefile and config.c; the *.in and *.dist files are in the source
Guido van Rossumb6775db1994-08-01 11:34:53 +000011# directory.)
12
Guido van Rossumfba715a1994-01-02 00:26:09 +000013# Each line in this file describes one or more optional modules.
Andrew M. Kuchlingab354bb2001-02-27 03:29:52 +000014# Modules enabled here will not be compiled by the setup.py script,
15# so the file can be used to override setup.py's behavior.
16
Guido van Rossumfba715a1994-01-02 00:26:09 +000017# Lines have the following structure:
18#
Guido van Rossumf6971e21994-08-30 12:25:20 +000019# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
Guido van Rossumfba715a1994-01-02 00:26:09 +000020#
Guido van Rossumf6971e21994-08-30 12:25:20 +000021# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
Guido van Rossumfba715a1994-01-02 00:26:09 +000022# <cpparg> is anything starting with -I, -D, -U or -C
23# <library> is anything ending in .a or beginning with -l or -L
24# <module> is anything else but should be a valid Python
25# identifier (letters, digits, underscores, beginning with non-digit)
26#
Guido van Rossum613b9431996-08-20 19:50:17 +000027# (As the makesetup script changes, it may recognize some other
28# arguments as well, e.g. *.so and *.sl as libraries. See the big
29# case statement in the makesetup script.)
30#
Guido van Rossumfba715a1994-01-02 00:26:09 +000031# Lines can also have the form
32#
33# <name> = <value>
34#
35# which defines a Make variable definition inserted into Makefile.in
Guido van Rossum7cc5abd1994-09-12 10:42:20 +000036#
Guido van Rossum30e817e1997-12-02 16:46:39 +000037# Finally, if a line contains just the word "*shared*" (without the
38# quotes but with the stars), then the following modules will not be
Martin v. Löwisbbeb1e62002-04-19 09:47:23 +000039# built statically. The build process works like this:
40#
41# 1. Build all modules that are declared as static in Modules/Setup,
42# combine them into libpythonxy.a, combine that into python.
43# 2. Build all modules that are listed as shared in Modules/Setup.
44# 3. Invoke setup.py. That builds all modules that
45# a) are not builtin, and
46# b) are not listed in Modules/Setup, and
47# c) can be build on the target
48#
49# Therefore, modules declared to be shared will not be
Guido van Rossum30e817e1997-12-02 16:46:39 +000050# included in the config.c file, nor in the list of objects to be
51# added to the library archive, and their linker options won't be
Martin v. Löwisbbeb1e62002-04-19 09:47:23 +000052# added to the linker options. Rules to create their .o files and
Guido van Rossum30e817e1997-12-02 16:46:39 +000053# their shared libraries will still be added to the Makefile, and
54# their names will be collected in the Make variable SHAREDMODS. This
Guido van Rossum7fef86e1998-10-07 14:41:54 +000055# is used to build modules as shared libraries. (They can be
56# installed using "make sharedinstall", which is implied by the
57# toplevel "make install" target.) (For compatibility,
Guido van Rossum30e817e1997-12-02 16:46:39 +000058# *noconfig* has the same effect as *shared*.)
Guido van Rossumb71c5701999-02-22 18:11:18 +000059#
Martin v. Löwisbbeb1e62002-04-19 09:47:23 +000060# In addition, *static* explicitly declares the following modules to
61# be static. Lines containing "*static*" and "*shared*" may thus
Thomas Wouters0e3f5912006-08-11 14:57:12 +000062# alternate throughout this file.
Guido van Rossumb6775db1994-08-01 11:34:53 +000063
Guido van Rossumfba715a1994-01-02 00:26:09 +000064# NOTE: As a standard policy, as many modules as can be supported by a
65# platform should be present. The distribution comes with all modules
66# enabled that are supported by most platforms and don't require you
Guido van Rossumf4449de1995-04-10 11:37:18 +000067# to ftp sources from elsewhere.
Guido van Rossumfba715a1994-01-02 00:26:09 +000068
69
Guido van Rossumb6775db1994-08-01 11:34:53 +000070# Some special rules to define PYTHONPATH.
71# Edit the definitions below to indicate which options you are using.
72# Don't add any whitespace or comments!
73
Guido van Rossum0c5e3c81996-07-31 17:49:01 +000074# Directories where library files get installed.
75# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
76DESTLIB=$(LIBDEST)
77MACHDESTLIB=$(BINLIBDEST)
Guido van Rossumb6775db1994-08-01 11:34:53 +000078
Guido van Rossum97227811997-04-11 17:19:54 +000079# NOTE: all the paths are now relative to the prefix that is computed
80# at run time!
81
Guido van Rossum0c5e3c81996-07-31 17:49:01 +000082# Standard path -- don't edit.
Guido van Rossum97227811997-04-11 17:19:54 +000083# No leading colon since this is the first entry.
84# Empty since this is now just the runtime prefix.
85DESTPATH=
Guido van Rossum1c206481995-09-13 18:39:04 +000086
Guido van Rossum0c5e3c81996-07-31 17:49:01 +000087# Site specific path components -- should begin with : if non-empty
88SITEPATH=
89
90# Standard path components for test modules
Guido van Rossum7d83a5e1999-02-08 21:49:22 +000091TESTPATH=
Guido van Rossumb6775db1994-08-01 11:34:53 +000092
Guido van Rossumd3c1bd31996-07-30 16:54:03 +000093# Path components for machine- or system-dependent modules and shared libraries
Guido van Rossuma9f02b81997-09-28 05:45:40 +000094MACHDEPPATH=:plat-$(MACHDEP)
Jack Jansen7b59b422003-03-17 15:44:10 +000095EXTRAMACHDEPPATH=
Guido van Rossumb6775db1994-08-01 11:34:53 +000096
Georg Brandl6e47a332008-05-17 19:15:58 +000097COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)
Guido van Rossumf5e0ea81994-09-12 15:35:36 +000098PYTHONPATH=$(COREPYTHONPATH)
Guido van Rossumb6775db1994-08-01 11:34:53 +000099
100
Guido van Rossumcaffcdf1995-03-10 15:14:13 +0000101# The modules listed here can't be built as shared libraries for
102# various reasons; therefore they are listed here instead of in the
103# normal order.
Guido van Rossum05bf2801994-10-20 22:01:38 +0000104
Andrew M. Kuchling3712d392001-01-17 18:55:13 +0000105# This only contains the minimal set of modules required to run the
106# setup.py script in the root of the Python source tree.
Guido van Rossumcaffcdf1995-03-10 15:14:13 +0000107
108posix posixmodule.c # posix (UNIX) system calls
Fred Drake5f8a23f2002-08-05 18:06:17 +0000109errno errnomodule.c # posix (UNIX) errno values
Georg Brandlcd4d1e82005-12-27 17:37:07 +0000110pwd pwdmodule.c # this is needed to find out the user's home dir
111 # if $HOME is not set
Guido van Rossume5679352000-03-31 15:01:27 +0000112_sre _sre.c # Fredrik Lundh's new regular expressions
Marc-André Lemburgb28de0d2002-12-12 17:37:50 +0000113_codecs _codecsmodule.c # access to the builtin codecs and codec registry
Guido van Rossum78c1c4d2007-05-24 17:45:19 +0000114_fileio _fileio.c # Standard I/O baseline
Georg Brandl3b8cb172007-10-23 06:26:46 +0000115_weakref _weakref.c # weak references
Guido van Rossumcaffcdf1995-03-10 15:14:13 +0000116
Just van Rossum52e14d62002-12-30 22:08:05 +0000117# The zipimport module is always imported at startup. Having it as a
118# builtin module avoids some bootstrapping problems and reduces overhead.
119zipimport zipimport.c
120
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000121# The rest of the modules listed in this file are all commented out by
122# default. Usually they can be detected and built as dynamically
123# loaded modules by the new setup.py script added in Python 2.1. If
124# you're on a platform that doesn't support dynamic loading, want to
125# compile modules statically into the Python binary, or need to
126# specify some odd set of compiler switches, you can uncomment the
127# appropriate lines below.
128
129# ======================================================================
130
Jeremy Hyltona25d9952001-10-17 13:46:44 +0000131# The Python symtable module depends on .h files that setup.py doesn't track
132_symtable symtablemodule.c
133
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000134# Uncommenting the following line tells makesetup that all following
135# modules are to be built as shared libraries (see above for more
136# detail; also note that *static* reverses this effect):
137
138#*shared*
139
140# GNU readline. Unlike previous Python incarnations, GNU readline is
141# now incorporated in an optional module, configured in the Setup file
142# instead of by a configure script switch. You may have to insert a
143# -L option pointing to the directory where libreadline.* lives,
144# and you may have to change -ltermcap to -ltermlib or perhaps remove
145# it, depending on your system -- see the GNU readline instructions.
146# It's okay for this to be a shared library, too.
147
148#readline readline.c -lreadline -ltermcap
149
150
151# Modules that should always be present (non UNIX dependent):
152
153#array arraymodule.c # array objects
154#cmath cmathmodule.c # -lm # complex math library functions
155#math mathmodule.c # -lm # math library functions, e.g. sin()
Thomas Wouters477c8d52006-05-27 19:21:47 +0000156#_struct _struct.c # binary structure packing/unpacking
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000157#time timemodule.c # -lm # time operations and variables
158#operator operator.c # operator.add() and similar goodies
Fred Drake2de74712001-02-01 05:26:54 +0000159#_weakref _weakref.c # basic weak reference support
Tim Petersf36fb692001-02-04 09:18:21 +0000160#_testcapi _testcapimodule.c # Python C API test module
Raymond Hettinger2a2385d2005-03-09 23:46:11 +0000161#_random _randommodule.c # Random number generator
162#collections collectionsmodule.c # Container types
163#itertools itertoolsmodule.c # Functions creating iterators for efficient looping
Collin Winter670e6922007-03-21 02:57:17 +0000164#atexit atexitmodule.c # Register functions to be run at interpreter-shutdown
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000165
Martin v. Löwis76192ee2001-02-06 09:34:40 +0000166#unicodedata unicodedata.c # static Unicode character database
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000167
Martin v. Löwis19d17342003-06-14 21:03:05 +0000168# access to ISO C locale support
169#_locale _localemodule.c # -lintl
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000170
171
172# Modules with some UNIX dependencies -- on by default:
173# (If you have a really backward UNIX, select and socket may not be
174# supported...)
175
176#fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
Martin v. Löwisc3001752005-01-23 09:27:24 +0000177#spwd spwdmodule.c # spwd(3)
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000178#grp grpmodule.c # grp(3)
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000179#select selectmodule.c # select(2); not on ancient System V
180
181# Memory-mapped files (also works on Win32).
182#mmap mmapmodule.c
183
Skip Montanaro24979822003-03-20 23:37:24 +0000184# CSV file helper
185#_csv _csv.c
186
Marc-André Lemburga5d2b4c2002-02-16 18:23:30 +0000187# Socket module helper for socket(2)
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000188#_socket socketmodule.c
189
Marc-André Lemburga5d2b4c2002-02-16 18:23:30 +0000190# Socket module helper for SSL support; you must comment out the other
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000191# socket line above, and possibly edit the SSL variable:
192#SSL=/usr/local/ssl
Marc-André Lemburga5d2b4c2002-02-16 18:23:30 +0000193#_ssl _ssl.c \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000194# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
195# -L$(SSL)/lib -lssl -lcrypto
196
197# The crypt module is now disabled by default because it breaks builds
198# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
199#
200# First, look at Setup.config; configure may have set this for you.
201
202#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
203
204
205# Some more UNIX dependent modules -- off by default, since these
206# are not supported by all UNIX systems:
207
208#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
209#termios termios.c # Steen Lumholt's termios module
210#resource resource.c # Jeremy Hylton's rlimit interface
211
212
213# Multimedia modules -- off by default.
214# These don't work for 64-bit platforms!!!
Martin v. Löwis8fbefe22004-07-19 16:42:20 +0000215# #993173 says audioop works on 64-bit platforms, though.
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000216# These represent audio samples or images as strings:
217
218#audioop audioop.c # Operations on audio samples
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000219
220
Thomas Wouters0e3f5912006-08-11 14:57:12 +0000221# Note that the _md5 and _sha modules are normally only built if the
222# system does not have the OpenSSL libs containing an optimized version.
223
224# The _md5 module implements the RSA Data Security, Inc. MD5
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000225# Message-Digest Algorithm, described in RFC 1321. The necessary files
Thomas Wouters49fd7fa2006-04-21 10:40:58 +0000226# md5.c and md5.h are included here.
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000227
Thomas Wouters0e3f5912006-08-11 14:57:12 +0000228#_md5 md5module.c md5.c
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000229
230
Georg Brandl86b2fb92008-07-16 03:43:04 +0000231# The _sha module implements the SHA checksum algorithms.
232# (NIST's Secure Hash Algorithms.)
Thomas Wouters0e3f5912006-08-11 14:57:12 +0000233#_sha shamodule.c
Georg Brandl86b2fb92008-07-16 03:43:04 +0000234#_sha256 sha256module.c
235#_sha512 sha512module.c
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000236
237
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000238# The _tkinter module.
239#
240# The command for _tkinter is long and site specific. Please
241# uncomment and/or edit those parts as indicated. If you don't have a
242# specific extension (e.g. Tix or BLT), leave the corresponding line
243# commented out. (Leave the trailing backslashes in! If you
244# experience strange errors, you may want to join all uncommented
245# lines and remove the backslashes -- the backslash interpretation is
246# done by the shell's "read" command and it may not be implemented on
247# every system.
248
249# *** Always uncomment this (leave the leading underscore in!):
250# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
Guido van Rossum86525222001-03-22 22:18:55 +0000251# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
252# -L/usr/local/lib \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000253# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
254# -I/usr/local/include \
255# *** Uncomment and edit to reflect where your X11 header files are:
256# -I/usr/X11R6/include \
257# *** Or uncomment this for Solaris:
258# -I/usr/openwin/include \
259# *** Uncomment and edit for Tix extension only:
Guido van Rossum86525222001-03-22 22:18:55 +0000260# -DWITH_TIX -ltix8.1.8.2 \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000261# *** Uncomment and edit for BLT extension only:
262# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
263# *** Uncomment and edit for PIL (TkImaging) extension only:
264# (See http://www.pythonware.com/products/pil/ for more info)
265# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
266# *** Uncomment and edit for TOGL extension only:
267# -DWITH_TOGL togl.c \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000268# *** Uncomment and edit to reflect your Tcl/Tk versions:
Guido van Rossum86525222001-03-22 22:18:55 +0000269# -ltk8.2 -ltcl8.2 \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000270# *** Uncomment and edit to reflect where your X11 libraries are:
271# -L/usr/X11R6/lib \
272# *** Or uncomment this for Solaris:
273# -L/usr/openwin/lib \
274# *** Uncomment these for TOGL extension only:
275# -lGL -lGLU -lXext -lXmu \
276# *** Uncomment for AIX:
277# -lld \
278# *** Always uncomment this; X11 libraries to link with:
279# -lX11
280
Andrew M. Kuchling4e699d52004-08-31 13:50:12 +0000281# Lance Ellinghaus's syslog module
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000282#syslog syslogmodule.c # syslog daemon interface
283
284
285# Curses support, requring the System V version of curses, often
286# provided by the ncurses library. e.g. on Linux, link with -lncurses
Skip Montanaroce59c042004-01-17 14:19:44 +0000287# instead of -lcurses).
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000288#
289# First, look at Setup.config; configure may have set this for you.
290
291#_curses _cursesmodule.c -lcurses -ltermcap
292# Wrapper for the panel library that's part of ncurses and SYSV curses.
293#_curses_panel _curses_panel.c -lpanel -lncurses
294
295
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000296# Modules that provide persistent dictionary-like semantics. You will
297# probably want to arrange for at least one of them to be available on
298# your machine, though none are defined by default because of library
Georg Brandl0a7ac7d2008-05-26 10:29:35 +0000299# dependencies. The Python module dbm/__init__.py provides an
300# implementation independent wrapper for these; dbm/dumb.py provides
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000301# similar functionality (but slower of course) implemented in Python.
302
303# The standard Unix dbm module has been moved to Setup.config so that
304# it will be compiled as a shared library by default. Compiling it as
305# a built-in module causes conflicts with the pybsddb3 module since it
306# creates a static dependency on an out-of-date version of db.so.
307#
308# First, look at Setup.config; configure may have set this for you.
309
Georg Brandl0a7ac7d2008-05-26 10:29:35 +0000310#_dbm _dbmmodule.c # dbm(3) may require -lndbm or similar
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000311
312# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:
313#
314# First, look at Setup.config; configure may have set this for you.
315
Georg Brandl0a7ac7d2008-05-26 10:29:35 +0000316#_gdbm _gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000317
318
Martin v. Löwis6aa4a1f2002-11-19 08:09:52 +0000319# Sleepycat Berkeley DB interface.
320#
321# This requires the Sleepycat DB code, see http://www.sleepycat.com/
Martin v. Löwis21645fc2002-11-19 08:30:08 +0000322# The earliest supported version of that library is 3.0, the latest
323# supported version is 4.0 (4.1 is specifically not supported, as that
324# changes the semantics of transactional databases). A list of available
325# releases can be found at
326#
327# http://www.sleepycat.com/update/index.html
Martin v. Löwis6aa4a1f2002-11-19 08:09:52 +0000328#
329# Edit the variables DB and DBLIBVERto point to the db top directory
330# and the subdirectory of PORT where you built it.
331#DB=/usr/local/BerkeleyDB.4.0
332#DBLIBVER=4.0
333#DBINC=$(DB)/include
334#DBLIB=$(DB)/lib
Gustavo Niemeyer3d5cbea2003-05-26 21:19:47 +0000335#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER)
Martin v. Löwis6aa4a1f2002-11-19 08:09:52 +0000336
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000337
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000338# Helper module for various ascii-encoders
339#binascii binascii.c
340
341# Fred Drake's interface to the Python parser
342#parser parsermodule.c
343
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000344
345# Lee Busby's SIGFPE modules.
346# The library to link fpectl with is platform specific.
347# Choose *one* of the options below for fpectl:
348
349# For SGI IRIX (tested on 5.3):
350#fpectl fpectlmodule.c -lfpe
351
352# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
353# (Without the compiler you don't have -lsunmath.)
354#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
355
356# For other systems: see instructions in fpectlmodule.c.
357#fpectl fpectlmodule.c ...
358
359# Test module for fpectl. No extra libraries needed.
360#fpetest fpetestmodule.c
361
362# Andrew Kuchling's zlib module.
363# This require zlib 1.1.3 (or later).
Neal Norwitz014f1032004-07-29 03:55:56 +0000364# See http://www.gzip.org/zlib/
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000365#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
366
367# Interface to the Expat XML parser
368#
Fred Drake9d416a72002-08-09 02:39:13 +0000369# Expat was written by James Clark and is now maintained by a group of
370# developers on SourceForge; see www.libexpat.org for more
371# information. The pyexpat module was written by Paul Prescod after a
372# prototype by Jack Jansen. Source of Expat 1.95.2 is included in
373# Modules/expat/. Usage of a system shared libexpat.so/expat.dll is
374# not advised.
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000375#
Fred Drake9d416a72002-08-09 02:39:13 +0000376# More information on Expat can be found at www.libexpat.org.
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000377#
Fred Drake9d416a72002-08-09 02:39:13 +0000378#EXPAT_DIR=/usr/local/src/expat-1.95.2
379#pyexpat pyexpat.c -DHAVE_EXPAT_H -I$(EXPAT_DIR)/lib -L$(EXPAT_DIR) -lexpat
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000380
Hye-Shik Chang3e2a3062004-01-17 14:29:29 +0000381
382# Hye-Shik Chang's CJKCodecs
383
384# multibytecodec is required for all the other CJK codec modules
385#_multibytecodec cjkcodecs/multibytecodec.c
386
Hye-Shik Chang2bb146f2004-07-18 03:06:29 +0000387#_codecs_cn cjkcodecs/_codecs_cn.c
388#_codecs_hk cjkcodecs/_codecs_hk.c
389#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
390#_codecs_jp cjkcodecs/_codecs_jp.c
391#_codecs_kr cjkcodecs/_codecs_kr.c
392#_codecs_tw cjkcodecs/_codecs_tw.c
Hye-Shik Chang3e2a3062004-01-17 14:29:29 +0000393
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000394# Example -- included for reference only:
395# xx xxmodule.c
396
Tim Peters6d6c1a32001-08-02 04:15:00 +0000397# Another example -- the 'xxsubtype' module shows C-level subtyping in action
398xxsubtype xxsubtype.c