chore: update docs/dyn (#1106)
diff --git a/docs/dyn/bigquerydatatransfer_v1.projects.transferConfigs.html b/docs/dyn/bigquerydatatransfer_v1.projects.transferConfigs.html
index e47e618..19cfd3f 100644
--- a/docs/dyn/bigquerydatatransfer_v1.projects.transferConfigs.html
+++ b/docs/dyn/bigquerydatatransfer_v1.projects.transferConfigs.html
@@ -83,7 +83,7 @@
<code><a href="#close">close()</a></code></p>
<p class="firstline">Close httplib2 connections.</p>
<p class="toc_element">
- <code><a href="#create">create(parent, body=None, authorizationCode=None, versionInfo=None, serviceAccountName=None, x__xgafv=None)</a></code></p>
+ <code><a href="#create">create(parent, body=None, authorizationCode=None, serviceAccountName=None, versionInfo=None, x__xgafv=None)</a></code></p>
<p class="firstline">Creates a new data transfer configuration.</p>
<p class="toc_element">
<code><a href="#delete">delete(name, x__xgafv=None)</a></code></p>
@@ -92,13 +92,13 @@
<code><a href="#get">get(name, x__xgafv=None)</a></code></p>
<p class="firstline">Returns information about a data transfer config.</p>
<p class="toc_element">
- <code><a href="#list">list(parent, dataSourceIds=None, pageSize=None, pageToken=None, x__xgafv=None)</a></code></p>
+ <code><a href="#list">list(parent, pageToken=None, pageSize=None, dataSourceIds=None, x__xgafv=None)</a></code></p>
<p class="firstline">Returns information about all data transfers in the project.</p>
<p class="toc_element">
<code><a href="#list_next">list_next(previous_request, previous_response)</a></code></p>
<p class="firstline">Retrieves the next page of results.</p>
<p class="toc_element">
- <code><a href="#patch">patch(name, body=None, updateMask=None, serviceAccountName=None, authorizationCode=None, versionInfo=None, x__xgafv=None)</a></code></p>
+ <code><a href="#patch">patch(name, body=None, serviceAccountName=None, updateMask=None, versionInfo=None, authorizationCode=None, x__xgafv=None)</a></code></p>
<p class="firstline">Updates a data transfer configuration. All fields must be set, even if they are not updated.</p>
<p class="toc_element">
<code><a href="#scheduleRuns">scheduleRuns(parent, body=None, x__xgafv=None)</a></code></p>
@@ -113,7 +113,7 @@
</div>
<div class="method">
- <code class="details" id="create">create(parent, body=None, authorizationCode=None, versionInfo=None, serviceAccountName=None, x__xgafv=None)</code>
+ <code class="details" id="create">create(parent, body=None, authorizationCode=None, serviceAccountName=None, versionInfo=None, x__xgafv=None)</code>
<pre>Creates a new data transfer configuration.
Args:
@@ -122,35 +122,35 @@
The object takes the form of:
{ # Represents a data transfer configuration. A transfer configuration contains all metadata needed to perform a data transfer. For example, `destination_dataset_id` specifies where data should be stored. When a new transfer configuration is created, the specified `destination_dataset_id` is created when needed and shared with the appropriate data source service account.
- "displayName": "A String", # User specified display name for the data transfer.
- "params": { # Data transfer specific parameters.
- "a_key": "", # Properties of the object.
- },
- "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"emailPreferences": { # Represents preferences for sending email notifications for transfer run events. # Email notifications will be sent according to these preferences to the email address of the user who owns this transfer config.
"enableFailureEmail": True or False, # If true, email notifications will be sent on transfer run failures.
},
"datasetRegion": "A String", # Output only. Region in which BigQuery dataset is located.
- "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
- "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
- "state": "A String", # Output only. State of the most recently updated transfer run.
- "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
"disabled": True or False, # Is this config disabled. When set to true, no runs are scheduled for a given transfer.
- "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
"scheduleOptions": { # Options customizing the data transfer schedule. # Options customizing the data transfer schedule.
- "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"endTime": "A String", # Defines time to stop scheduling transfer runs. A transfer run cannot be scheduled at or after the end time. The end time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
+ "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"startTime": "A String", # Specifies time to start scheduling transfer runs. The first run will be scheduled at or after the start time according to a recurrence pattern defined in the schedule string. The start time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
},
"notificationPubsubTopic": "A String", # Pub/Sub topic where notifications will be sent after transfer runs associated with this transfer config finish.
- "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
- "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "state": "A String", # Output only. State of the most recently updated transfer run.
+ "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"destinationDatasetId": "A String", # The BigQuery target dataset id.
+ "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
+ "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
+ "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
+ "displayName": "A String", # User specified display name for the data transfer.
+ "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
+ "params": { # Data transfer specific parameters.
+ "a_key": "", # Properties of the object.
+ },
+ "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
}
authorizationCode: string, Optional OAuth2 authorization code to use with this transfer configuration. This is required if new credentials are needed, as indicated by `CheckValidCreds`. In order to obtain authorization_code, please make a request to https://www.gstatic.com/bigquerydatatransfer/oauthz/auth?client_id=&scope=&redirect_uri= * client_id should be OAuth client_id of BigQuery DTS API for the given data source returned by ListDataSources method. * data_source_scopes are the scopes returned by ListDataSources method. * redirect_uri is an optional parameter. If not specified, then authorization code is posted to the opener of authorization flow window. Otherwise it will be sent to the redirect uri. A special value of urn:ietf:wg:oauth:2.0:oob means that authorization code should be returned in the title bar of the browser, with the page text prompting the user to copy the code and paste it in the application.
- versionInfo: string, Optional version info. If users want to find a very recent access token, that is, immediately after approving access, users have to set the version_info claim in the token request. To obtain the version_info, users must use the "none+gsession" response type. which be return a version_info back in the authorization response which be be put in a JWT claim in the token request.
serviceAccountName: string, Optional service account name. If this field is set, transfer config will be created with this service account credentials. It requires that requesting user calling this API has permissions to act as this service account.
+ versionInfo: string, Optional version info. If users want to find a very recent access token, that is, immediately after approving access, users have to set the version_info claim in the token request. To obtain the version_info, users must use the "none+gsession" response type. which be return a version_info back in the authorization response which be be put in a JWT claim in the token request.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
@@ -160,30 +160,30 @@
An object of the form:
{ # Represents a data transfer configuration. A transfer configuration contains all metadata needed to perform a data transfer. For example, `destination_dataset_id` specifies where data should be stored. When a new transfer configuration is created, the specified `destination_dataset_id` is created when needed and shared with the appropriate data source service account.
- "displayName": "A String", # User specified display name for the data transfer.
- "params": { # Data transfer specific parameters.
- "a_key": "", # Properties of the object.
- },
- "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"emailPreferences": { # Represents preferences for sending email notifications for transfer run events. # Email notifications will be sent according to these preferences to the email address of the user who owns this transfer config.
"enableFailureEmail": True or False, # If true, email notifications will be sent on transfer run failures.
},
"datasetRegion": "A String", # Output only. Region in which BigQuery dataset is located.
- "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
- "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
- "state": "A String", # Output only. State of the most recently updated transfer run.
- "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
"disabled": True or False, # Is this config disabled. When set to true, no runs are scheduled for a given transfer.
- "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
"scheduleOptions": { # Options customizing the data transfer schedule. # Options customizing the data transfer schedule.
- "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"endTime": "A String", # Defines time to stop scheduling transfer runs. A transfer run cannot be scheduled at or after the end time. The end time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
+ "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"startTime": "A String", # Specifies time to start scheduling transfer runs. The first run will be scheduled at or after the start time according to a recurrence pattern defined in the schedule string. The start time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
},
"notificationPubsubTopic": "A String", # Pub/Sub topic where notifications will be sent after transfer runs associated with this transfer config finish.
- "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
- "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "state": "A String", # Output only. State of the most recently updated transfer run.
+ "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"destinationDatasetId": "A String", # The BigQuery target dataset id.
+ "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
+ "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
+ "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
+ "displayName": "A String", # User specified display name for the data transfer.
+ "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
+ "params": { # Data transfer specific parameters.
+ "a_key": "", # Properties of the object.
+ },
+ "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
}</pre>
</div>
@@ -220,42 +220,42 @@
An object of the form:
{ # Represents a data transfer configuration. A transfer configuration contains all metadata needed to perform a data transfer. For example, `destination_dataset_id` specifies where data should be stored. When a new transfer configuration is created, the specified `destination_dataset_id` is created when needed and shared with the appropriate data source service account.
- "displayName": "A String", # User specified display name for the data transfer.
- "params": { # Data transfer specific parameters.
- "a_key": "", # Properties of the object.
- },
- "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"emailPreferences": { # Represents preferences for sending email notifications for transfer run events. # Email notifications will be sent according to these preferences to the email address of the user who owns this transfer config.
"enableFailureEmail": True or False, # If true, email notifications will be sent on transfer run failures.
},
"datasetRegion": "A String", # Output only. Region in which BigQuery dataset is located.
- "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
- "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
- "state": "A String", # Output only. State of the most recently updated transfer run.
- "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
"disabled": True or False, # Is this config disabled. When set to true, no runs are scheduled for a given transfer.
- "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
"scheduleOptions": { # Options customizing the data transfer schedule. # Options customizing the data transfer schedule.
- "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"endTime": "A String", # Defines time to stop scheduling transfer runs. A transfer run cannot be scheduled at or after the end time. The end time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
+ "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"startTime": "A String", # Specifies time to start scheduling transfer runs. The first run will be scheduled at or after the start time according to a recurrence pattern defined in the schedule string. The start time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
},
"notificationPubsubTopic": "A String", # Pub/Sub topic where notifications will be sent after transfer runs associated with this transfer config finish.
- "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
- "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "state": "A String", # Output only. State of the most recently updated transfer run.
+ "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"destinationDatasetId": "A String", # The BigQuery target dataset id.
+ "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
+ "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
+ "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
+ "displayName": "A String", # User specified display name for the data transfer.
+ "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
+ "params": { # Data transfer specific parameters.
+ "a_key": "", # Properties of the object.
+ },
+ "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
}</pre>
</div>
<div class="method">
- <code class="details" id="list">list(parent, dataSourceIds=None, pageSize=None, pageToken=None, x__xgafv=None)</code>
+ <code class="details" id="list">list(parent, pageToken=None, pageSize=None, dataSourceIds=None, x__xgafv=None)</code>
<pre>Returns information about all data transfers in the project.
Args:
parent: string, Required. The BigQuery project id for which data sources should be returned: `projects/{project_id}` or `projects/{project_id}/locations/{location_id}` (required)
- dataSourceIds: string, When specified, only configurations of requested data sources are returned. (repeated)
- pageSize: integer, Page size. The default page size is the maximum value of 1000 results.
pageToken: string, Pagination token, which can be used to request a specific page of `ListTransfersRequest` list results. For multiple-page results, `ListTransfersResponse` outputs a `next_page` token, which can be used as the `page_token` value to request the next page of list results.
+ pageSize: integer, Page size. The default page size is the maximum value of 1000 results.
+ dataSourceIds: string, When specified, only configurations of requested data sources are returned. (repeated)
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
@@ -265,35 +265,35 @@
An object of the form:
{ # The returned list of pipelines in the project.
- "nextPageToken": "A String", # Output only. The next-pagination token. For multiple-page list results, this token can be used as the `ListTransferConfigsRequest.page_token` to request the next page of list results.
"transferConfigs": [ # Output only. The stored pipeline transfer configurations.
{ # Represents a data transfer configuration. A transfer configuration contains all metadata needed to perform a data transfer. For example, `destination_dataset_id` specifies where data should be stored. When a new transfer configuration is created, the specified `destination_dataset_id` is created when needed and shared with the appropriate data source service account.
- "displayName": "A String", # User specified display name for the data transfer.
- "params": { # Data transfer specific parameters.
- "a_key": "", # Properties of the object.
- },
- "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"emailPreferences": { # Represents preferences for sending email notifications for transfer run events. # Email notifications will be sent according to these preferences to the email address of the user who owns this transfer config.
"enableFailureEmail": True or False, # If true, email notifications will be sent on transfer run failures.
},
"datasetRegion": "A String", # Output only. Region in which BigQuery dataset is located.
- "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
- "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
- "state": "A String", # Output only. State of the most recently updated transfer run.
- "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
"disabled": True or False, # Is this config disabled. When set to true, no runs are scheduled for a given transfer.
- "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
"scheduleOptions": { # Options customizing the data transfer schedule. # Options customizing the data transfer schedule.
- "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"endTime": "A String", # Defines time to stop scheduling transfer runs. A transfer run cannot be scheduled at or after the end time. The end time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
+ "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"startTime": "A String", # Specifies time to start scheduling transfer runs. The first run will be scheduled at or after the start time according to a recurrence pattern defined in the schedule string. The start time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
},
"notificationPubsubTopic": "A String", # Pub/Sub topic where notifications will be sent after transfer runs associated with this transfer config finish.
- "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
- "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "state": "A String", # Output only. State of the most recently updated transfer run.
+ "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"destinationDatasetId": "A String", # The BigQuery target dataset id.
+ "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
+ "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
+ "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
+ "displayName": "A String", # User specified display name for the data transfer.
+ "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
+ "params": { # Data transfer specific parameters.
+ "a_key": "", # Properties of the object.
+ },
+ "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
},
],
+ "nextPageToken": "A String", # Output only. The next-pagination token. For multiple-page list results, this token can be used as the `ListTransferConfigsRequest.page_token` to request the next page of list results.
}</pre>
</div>
@@ -312,7 +312,7 @@
</div>
<div class="method">
- <code class="details" id="patch">patch(name, body=None, updateMask=None, serviceAccountName=None, authorizationCode=None, versionInfo=None, x__xgafv=None)</code>
+ <code class="details" id="patch">patch(name, body=None, serviceAccountName=None, updateMask=None, versionInfo=None, authorizationCode=None, x__xgafv=None)</code>
<pre>Updates a data transfer configuration. All fields must be set, even if they are not updated.
Args:
@@ -321,36 +321,36 @@
The object takes the form of:
{ # Represents a data transfer configuration. A transfer configuration contains all metadata needed to perform a data transfer. For example, `destination_dataset_id` specifies where data should be stored. When a new transfer configuration is created, the specified `destination_dataset_id` is created when needed and shared with the appropriate data source service account.
- "displayName": "A String", # User specified display name for the data transfer.
- "params": { # Data transfer specific parameters.
- "a_key": "", # Properties of the object.
- },
- "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"emailPreferences": { # Represents preferences for sending email notifications for transfer run events. # Email notifications will be sent according to these preferences to the email address of the user who owns this transfer config.
"enableFailureEmail": True or False, # If true, email notifications will be sent on transfer run failures.
},
"datasetRegion": "A String", # Output only. Region in which BigQuery dataset is located.
- "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
- "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
- "state": "A String", # Output only. State of the most recently updated transfer run.
- "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
"disabled": True or False, # Is this config disabled. When set to true, no runs are scheduled for a given transfer.
- "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
"scheduleOptions": { # Options customizing the data transfer schedule. # Options customizing the data transfer schedule.
- "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"endTime": "A String", # Defines time to stop scheduling transfer runs. A transfer run cannot be scheduled at or after the end time. The end time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
+ "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"startTime": "A String", # Specifies time to start scheduling transfer runs. The first run will be scheduled at or after the start time according to a recurrence pattern defined in the schedule string. The start time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
},
"notificationPubsubTopic": "A String", # Pub/Sub topic where notifications will be sent after transfer runs associated with this transfer config finish.
- "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
- "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "state": "A String", # Output only. State of the most recently updated transfer run.
+ "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"destinationDatasetId": "A String", # The BigQuery target dataset id.
+ "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
+ "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
+ "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
+ "displayName": "A String", # User specified display name for the data transfer.
+ "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
+ "params": { # Data transfer specific parameters.
+ "a_key": "", # Properties of the object.
+ },
+ "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
}
- updateMask: string, Required. Required list of fields to be updated in this request.
serviceAccountName: string, Optional service account name. If this field is set and "service_account_name" is set in update_mask, transfer config will be updated to use this service account credentials. It requires that requesting user calling this API has permissions to act as this service account.
- authorizationCode: string, Optional OAuth2 authorization code to use with this transfer configuration. If it is provided, the transfer configuration will be associated with the authorizing user. In order to obtain authorization_code, please make a request to https://www.gstatic.com/bigquerydatatransfer/oauthz/auth?client_id=&scope=&redirect_uri= * client_id should be OAuth client_id of BigQuery DTS API for the given data source returned by ListDataSources method. * data_source_scopes are the scopes returned by ListDataSources method. * redirect_uri is an optional parameter. If not specified, then authorization code is posted to the opener of authorization flow window. Otherwise it will be sent to the redirect uri. A special value of urn:ietf:wg:oauth:2.0:oob means that authorization code should be returned in the title bar of the browser, with the page text prompting the user to copy the code and paste it in the application.
+ updateMask: string, Required. Required list of fields to be updated in this request.
versionInfo: string, Optional version info. If users want to find a very recent access token, that is, immediately after approving access, users have to set the version_info claim in the token request. To obtain the version_info, users must use the "none+gsession" response type. which be return a version_info back in the authorization response which be be put in a JWT claim in the token request.
+ authorizationCode: string, Optional OAuth2 authorization code to use with this transfer configuration. If it is provided, the transfer configuration will be associated with the authorizing user. In order to obtain authorization_code, please make a request to https://www.gstatic.com/bigquerydatatransfer/oauthz/auth?client_id=&scope=&redirect_uri= * client_id should be OAuth client_id of BigQuery DTS API for the given data source returned by ListDataSources method. * data_source_scopes are the scopes returned by ListDataSources method. * redirect_uri is an optional parameter. If not specified, then authorization code is posted to the opener of authorization flow window. Otherwise it will be sent to the redirect uri. A special value of urn:ietf:wg:oauth:2.0:oob means that authorization code should be returned in the title bar of the browser, with the page text prompting the user to copy the code and paste it in the application.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
@@ -360,30 +360,30 @@
An object of the form:
{ # Represents a data transfer configuration. A transfer configuration contains all metadata needed to perform a data transfer. For example, `destination_dataset_id` specifies where data should be stored. When a new transfer configuration is created, the specified `destination_dataset_id` is created when needed and shared with the appropriate data source service account.
- "displayName": "A String", # User specified display name for the data transfer.
- "params": { # Data transfer specific parameters.
- "a_key": "", # Properties of the object.
- },
- "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"emailPreferences": { # Represents preferences for sending email notifications for transfer run events. # Email notifications will be sent according to these preferences to the email address of the user who owns this transfer config.
"enableFailureEmail": True or False, # If true, email notifications will be sent on transfer run failures.
},
"datasetRegion": "A String", # Output only. Region in which BigQuery dataset is located.
- "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
- "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
- "state": "A String", # Output only. State of the most recently updated transfer run.
- "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
"disabled": True or False, # Is this config disabled. When set to true, no runs are scheduled for a given transfer.
- "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
"scheduleOptions": { # Options customizing the data transfer schedule. # Options customizing the data transfer schedule.
- "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"endTime": "A String", # Defines time to stop scheduling transfer runs. A transfer run cannot be scheduled at or after the end time. The end time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
+ "disableAutoScheduling": True or False, # If true, automatic scheduling of data transfer runs for this configuration will be disabled. The runs can be started on ad-hoc basis using StartManualTransferRuns API. When automatic scheduling is disabled, the TransferConfig.schedule field will be ignored.
"startTime": "A String", # Specifies time to start scheduling transfer runs. The first run will be scheduled at or after the start time according to a recurrence pattern defined in the schedule string. The start time can be changed at any moment. The time when a data transfer can be trigerred manually is not limited by this option.
},
"notificationPubsubTopic": "A String", # Pub/Sub topic where notifications will be sent after transfer runs associated with this transfer config finish.
- "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
- "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "state": "A String", # Output only. State of the most recently updated transfer run.
+ "nextRunTime": "A String", # Output only. Next time when data transfer will run.
"destinationDatasetId": "A String", # The BigQuery target dataset id.
+ "name": "A String", # The resource name of the transfer config. Transfer config names have the form of `projects/{project_id}/locations/{region}/transferConfigs/{config_id}`. The name is automatically generated based on the config_id specified in CreateTransferConfigRequest along with project_id and region. If config_id is not provided, usually a uuid, even though it is not guaranteed or required, will be generated for config_id.
+ "dataSourceId": "A String", # Data source id. Cannot be changed once data transfer is created.
+ "updateTime": "A String", # Output only. Data transfer modification time. Ignored by server on input.
+ "dataRefreshWindowDays": 42, # The number of days to look back to automatically refresh the data. For example, if `data_refresh_window_days = 10`, then every day BigQuery reingests data for [today-10, today-1], rather than ingesting data for just [today-1]. Only valid if the data source supports the feature. Set the value to 0 to use the default value.
+ "displayName": "A String", # User specified display name for the data transfer.
+ "schedule": "A String", # Data transfer schedule. If the data source does not support a custom schedule, this should be empty. If it is empty, the default value for the data source will be used. The specified times are in UTC. Examples of valid format: `1st,3rd monday of month 15:30`, `every wed,fri of jan,jun 13:15`, and `first sunday of quarter 00:00`. See more explanation about the format here: https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format NOTE: the granularity should be at least 8 hours, or less frequent.
+ "params": { # Data transfer specific parameters.
+ "a_key": "", # Properties of the object.
+ },
+ "userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
}</pre>
</div>
@@ -412,19 +412,13 @@
{ # A response to schedule transfer runs for a time range.
"runs": [ # The transfer runs that were scheduled.
{ # Represents a data transfer run.
- "updateTime": "A String", # Output only. Last time the data transfer run state was updated.
- "params": { # Output only. Data transfer specific parameters.
- "a_key": "", # Properties of the object.
- },
- "dataSourceId": "A String", # Output only. Data source id.
- "startTime": "A String", # Output only. Time when transfer run was started. Parameter ignored by server for input requests.
- "runTime": "A String", # For batch transfer runs, specifies the date and time of the data should be ingested.
- "name": "A String", # The resource name of the transfer run. Transfer run names have the form `projects/{project_id}/locations/{location}/transferConfigs/{config_id}/runs/{run_id}`. The name is ignored when creating a transfer run.
- "scheduleTime": "A String", # Minimum time after which a transfer run can be started.
"schedule": "A String", # Output only. Describes the schedule of this transfer run if it was created as part of a regular schedule. For batch transfer runs that are scheduled manually, this is empty. NOTE: the system might choose to delay the schedule depending on the current load, so `schedule_time` doesn't always match this.
"endTime": "A String", # Output only. Time when transfer run ended. Parameter ignored by server for input requests.
- "destinationDatasetId": "A String", # Output only. The BigQuery target dataset id.
- "state": "A String", # Data transfer run state. Ignored for input requests.
+ "dataSourceId": "A String", # Output only. Data source id.
+ "notificationPubsubTopic": "A String", # Output only. Pub/Sub topic where a notification will be sent after this transfer run finishes
+ "emailPreferences": { # Represents preferences for sending email notifications for transfer run events. # Output only. Email notifications will be sent according to these preferences to the email address of the user who owns the transfer config this run was derived from.
+ "enableFailureEmail": True or False, # If true, email notifications will be sent on transfer run failures.
+ },
"errorStatus": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # Status of the transfer run.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
@@ -434,11 +428,17 @@
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
- "notificationPubsubTopic": "A String", # Output only. Pub/Sub topic where a notification will be sent after this transfer run finishes
- "emailPreferences": { # Represents preferences for sending email notifications for transfer run events. # Output only. Email notifications will be sent according to these preferences to the email address of the user who owns the transfer config this run was derived from.
- "enableFailureEmail": True or False, # If true, email notifications will be sent on transfer run failures.
+ "params": { # Output only. Data transfer specific parameters.
+ "a_key": "", # Properties of the object.
},
+ "scheduleTime": "A String", # Minimum time after which a transfer run can be started.
+ "runTime": "A String", # For batch transfer runs, specifies the date and time of the data should be ingested.
"userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
+ "startTime": "A String", # Output only. Time when transfer run was started. Parameter ignored by server for input requests.
+ "updateTime": "A String", # Output only. Last time the data transfer run state was updated.
+ "destinationDatasetId": "A String", # Output only. The BigQuery target dataset id.
+ "name": "A String", # The resource name of the transfer run. Transfer run names have the form `projects/{project_id}/locations/{location}/transferConfigs/{config_id}/runs/{run_id}`. The name is ignored when creating a transfer run.
+ "state": "A String", # Data transfer run state. Ignored for input requests.
},
],
}</pre>
@@ -472,19 +472,13 @@
{ # A response to start manual transfer runs.
"runs": [ # The transfer runs that were created.
{ # Represents a data transfer run.
- "updateTime": "A String", # Output only. Last time the data transfer run state was updated.
- "params": { # Output only. Data transfer specific parameters.
- "a_key": "", # Properties of the object.
- },
- "dataSourceId": "A String", # Output only. Data source id.
- "startTime": "A String", # Output only. Time when transfer run was started. Parameter ignored by server for input requests.
- "runTime": "A String", # For batch transfer runs, specifies the date and time of the data should be ingested.
- "name": "A String", # The resource name of the transfer run. Transfer run names have the form `projects/{project_id}/locations/{location}/transferConfigs/{config_id}/runs/{run_id}`. The name is ignored when creating a transfer run.
- "scheduleTime": "A String", # Minimum time after which a transfer run can be started.
"schedule": "A String", # Output only. Describes the schedule of this transfer run if it was created as part of a regular schedule. For batch transfer runs that are scheduled manually, this is empty. NOTE: the system might choose to delay the schedule depending on the current load, so `schedule_time` doesn't always match this.
"endTime": "A String", # Output only. Time when transfer run ended. Parameter ignored by server for input requests.
- "destinationDatasetId": "A String", # Output only. The BigQuery target dataset id.
- "state": "A String", # Data transfer run state. Ignored for input requests.
+ "dataSourceId": "A String", # Output only. Data source id.
+ "notificationPubsubTopic": "A String", # Output only. Pub/Sub topic where a notification will be sent after this transfer run finishes
+ "emailPreferences": { # Represents preferences for sending email notifications for transfer run events. # Output only. Email notifications will be sent according to these preferences to the email address of the user who owns the transfer config this run was derived from.
+ "enableFailureEmail": True or False, # If true, email notifications will be sent on transfer run failures.
+ },
"errorStatus": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # Status of the transfer run.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
@@ -494,11 +488,17 @@
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
- "notificationPubsubTopic": "A String", # Output only. Pub/Sub topic where a notification will be sent after this transfer run finishes
- "emailPreferences": { # Represents preferences for sending email notifications for transfer run events. # Output only. Email notifications will be sent according to these preferences to the email address of the user who owns the transfer config this run was derived from.
- "enableFailureEmail": True or False, # If true, email notifications will be sent on transfer run failures.
+ "params": { # Output only. Data transfer specific parameters.
+ "a_key": "", # Properties of the object.
},
+ "scheduleTime": "A String", # Minimum time after which a transfer run can be started.
+ "runTime": "A String", # For batch transfer runs, specifies the date and time of the data should be ingested.
"userId": "A String", # Deprecated. Unique ID of the user on whose behalf transfer is done.
+ "startTime": "A String", # Output only. Time when transfer run was started. Parameter ignored by server for input requests.
+ "updateTime": "A String", # Output only. Last time the data transfer run state was updated.
+ "destinationDatasetId": "A String", # Output only. The BigQuery target dataset id.
+ "name": "A String", # The resource name of the transfer run. Transfer run names have the form `projects/{project_id}/locations/{location}/transferConfigs/{config_id}/runs/{run_id}`. The name is ignored when creating a transfer run.
+ "state": "A String", # Data transfer run state. Ignored for input requests.
},
],
}</pre>