chore: Update discovery artifacts (#1291)
* chore: update docs/dyn/index.md
* chore(abusiveexperiencereport): update the api
* chore(acceleratedmobilepageurl): update the api
* chore(accessapproval): update the api
* chore(accesscontextmanager): update the api
* chore(adexchangebuyer2): update the api
* chore(adexperiencereport): update the api
* chore(admob): update the api
* chore(analytics): update the api
* chore(analyticsreporting): update the api
* chore(androiddeviceprovisioning): update the api
* chore(androidenterprise): update the api
* chore(androidpublisher): update the api
* chore(apigateway): update the api
* chore(artifactregistry): update the api
* chore(bigqueryconnection): update the api
* chore(bigquerydatatransfer): update the api
* chore(billingbudgets): update the api
* chore(binaryauthorization): update the api
* chore(blogger): update the api
* chore(books): update the api
* chore(calendar): update the api
* chore(chat): update the api
* chore(chromeuxreport): update the api
* chore(civicinfo): update the api
* chore(classroom): update the api
* chore(cloudbilling): update the api
* chore(cloudbuild): update the api
* chore(clouddebugger): update the api
* chore(clouderrorreporting): update the api
* chore(cloudfunctions): update the api
* chore(cloudidentity): update the api
* chore(cloudiot): update the api
* chore(cloudkms): update the api
* chore(cloudprofiler): update the api
* chore(cloudresourcemanager): update the api
* chore(cloudscheduler): update the api
* chore(cloudshell): update the api
* chore(cloudtasks): update the api
* chore(cloudtrace): update the api
* chore(composer): update the api
* chore(containeranalysis): update the api
* chore(content): update the api
* chore(customsearch): update the api
* chore(datacatalog): update the api
* chore(datafusion): update the api
* chore(datamigration): update the api
* chore(datastore): update the api
* chore(deploymentmanager): update the api
* chore(digitalassetlinks): update the api
* chore(displayvideo): update the api
* chore(dlp): update the api
* chore(dns): update the api
* chore(docs): update the api
* chore(domains): update the api
* chore(domainsrdap): update the api
* chore(doubleclickbidmanager): update the api
* chore(doubleclicksearch): update the api
* chore(drive): update the api
* chore(driveactivity): update the api
* chore(eventarc): update the api
* chore(factchecktools): update the api
* chore(fcm): update the api
* chore(file): update the api
* chore(firebase): update the api
* chore(firebasedatabase): update the api
* chore(firebasedynamiclinks): update the api
* chore(firebasehosting): update the api
* chore(firebaseml): update the api
* chore(firebaserules): update the api
* chore(firestore): update the api
* chore(fitness): update the api
* chore(gamesConfiguration): update the api
* chore(gamesManagement): update the api
* chore(gameservices): update the api
* chore(genomics): update the api
* chore(gmail): update the api
* chore(gmailpostmastertools): update the api
* chore(groupsmigration): update the api
* chore(groupssettings): update the api
* chore(healthcare): update the api
* chore(iam): update the api
* chore(iamcredentials): update the api
* chore(iap): update the api
* chore(identitytoolkit): update the api
* chore(indexing): update the api
* chore(jobs): update the api
* chore(kgsearch): update the api
* chore(language): update the api
* chore(libraryagent): update the api
* chore(licensing): update the api
* chore(lifesciences): update the api
* chore(logging): update the api
* chore(managedidentities): update the api
* chore(manufacturers): update the api
* chore(memcache): update the api
* chore(ml): update the api
* chore(monitoring): update the api
* chore(networkmanagement): update the api
* chore(osconfig): update the api
* chore(pagespeedonline): update the api
* chore(playablelocations): update the api
* chore(playcustomapp): update the api
* chore(policytroubleshooter): update the api
* chore(poly): update the api
* chore(privateca): update the api
* chore(prod_tt_sasportal): update the api
* chore(pubsub): update the api
* chore(pubsublite): update the api
* chore(realtimebidding): update the api
* chore(recommendationengine): update the api
* chore(recommender): update the api
* chore(redis): update the api
* chore(remotebuildexecution): update the api
* chore(reseller): update the api
* chore(runtimeconfig): update the api
* chore(safebrowsing): update the api
* chore(sasportal): update the api
* chore(script): update the api
* chore(searchconsole): update the api
* chore(secretmanager): update the api
* chore(servicecontrol): update the api
* chore(servicedirectory): update the api
* chore(siteVerification): update the api
* chore(slides): update the api
* chore(smartdevicemanagement): update the api
* chore(sourcerepo): update the api
* chore(sqladmin): update the api
* chore(storage): update the api
* chore(storagetransfer): update the api
* chore(streetviewpublish): update the api
* chore(sts): update the api
* chore(tagmanager): update the api
* chore(tasks): update the api
* chore(testing): update the api
* chore(texttospeech): update the api
* chore(toolresults): update the api
* chore(trafficdirector): update the api
* chore(transcoder): update the api
* chore(translate): update the api
* chore(vault): update the api
* chore(vectortile): update the api
* chore(verifiedaccess): update the api
* chore(videointelligence): update the api
* chore(vision): update the api
* chore(webfonts): update the api
* chore(webmasters): update the api
* chore(websecurityscanner): update the api
* chore(workflowexecutions): update the api
* chore(workflows): update the api
* chore(youtubeAnalytics): update the api
* chore(youtubereporting): update the api
* chore(docs): Add new discovery artifacts and reference documents
diff --git a/docs/dyn/transcoder_v1beta1.projects.locations.jobs.html b/docs/dyn/transcoder_v1beta1.projects.locations.jobs.html
index 7efdf85..d458b7e 100644
--- a/docs/dyn/transcoder_v1beta1.projects.locations.jobs.html
+++ b/docs/dyn/transcoder_v1beta1.projects.locations.jobs.html
@@ -178,7 +178,7 @@
"crfLevel": 42, # Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.
"enableTwoPass": True or False, # Use two-pass encoding strategy to achieve better video quality. `VideoStream.rate_control_mode` must be `"vbr"`. The default is `false`.
"entropyCoder": "A String", # The entropy coder to use. The default is `"cabac"`. Supported entropy coders: - 'cavlc' - 'cabac'
- "frameRate": 3.14, # Required. The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. The following table shows the computed video FPS given the target FPS (in parenthesis) and input FPS (in the first column): ``` | | (30) | (60) | (25) | (50) | |--------|--------|--------|------|------| | 240 | Fail | Fail | Fail | Fail | | 120 | 30 | 60 | 20 | 30 | | 100 | 25 | 50 | 20 | 30 | | 50 | 25 | 50 | 20 | 30 | | 60 | 30 | 60 | 20 | 30 | | 59.94 | 29.97 | 59.94 | 20 | 30 | | 48 | 24 | 48 | 20 | 30 | | 30 | 30 | 30 | 20 | 30 | | 25 | 25 | 25 | 20 | 30 | | 24 | 24 | 24 | 20 | 30 | | 23.976 | 23.976 | 23.976 | 20 | 30 | | 15 | 15 | 15 | 20 | 30 | | 12 | 12 | 12 | 20 | 30 | | 10 | 10 | 10 | 20 | 30 | ```
+ "frameRate": 3.14, # Required. The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculate frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
"gopDuration": "A String", # Select the GOP size based on the specified duration. The default is `"3s"`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
"gopFrameCount": 42, # Select the GOP size based on the specified frame count. Must be greater than zero.
"heightPixels": 42, # The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used.
@@ -432,7 +432,7 @@
"crfLevel": 42, # Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.
"enableTwoPass": True or False, # Use two-pass encoding strategy to achieve better video quality. `VideoStream.rate_control_mode` must be `"vbr"`. The default is `false`.
"entropyCoder": "A String", # The entropy coder to use. The default is `"cabac"`. Supported entropy coders: - 'cavlc' - 'cabac'
- "frameRate": 3.14, # Required. The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. The following table shows the computed video FPS given the target FPS (in parenthesis) and input FPS (in the first column): ``` | | (30) | (60) | (25) | (50) | |--------|--------|--------|------|------| | 240 | Fail | Fail | Fail | Fail | | 120 | 30 | 60 | 20 | 30 | | 100 | 25 | 50 | 20 | 30 | | 50 | 25 | 50 | 20 | 30 | | 60 | 30 | 60 | 20 | 30 | | 59.94 | 29.97 | 59.94 | 20 | 30 | | 48 | 24 | 48 | 20 | 30 | | 30 | 30 | 30 | 20 | 30 | | 25 | 25 | 25 | 20 | 30 | | 24 | 24 | 24 | 20 | 30 | | 23.976 | 23.976 | 23.976 | 20 | 30 | | 15 | 15 | 15 | 20 | 30 | | 12 | 12 | 12 | 20 | 30 | | 10 | 10 | 10 | 20 | 30 | ```
+ "frameRate": 3.14, # Required. The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculate frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
"gopDuration": "A String", # Select the GOP size based on the specified duration. The default is `"3s"`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
"gopFrameCount": 42, # Select the GOP size based on the specified frame count. Must be greater than zero.
"heightPixels": 42, # The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used.
@@ -711,7 +711,7 @@
"crfLevel": 42, # Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.
"enableTwoPass": True or False, # Use two-pass encoding strategy to achieve better video quality. `VideoStream.rate_control_mode` must be `"vbr"`. The default is `false`.
"entropyCoder": "A String", # The entropy coder to use. The default is `"cabac"`. Supported entropy coders: - 'cavlc' - 'cabac'
- "frameRate": 3.14, # Required. The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. The following table shows the computed video FPS given the target FPS (in parenthesis) and input FPS (in the first column): ``` | | (30) | (60) | (25) | (50) | |--------|--------|--------|------|------| | 240 | Fail | Fail | Fail | Fail | | 120 | 30 | 60 | 20 | 30 | | 100 | 25 | 50 | 20 | 30 | | 50 | 25 | 50 | 20 | 30 | | 60 | 30 | 60 | 20 | 30 | | 59.94 | 29.97 | 59.94 | 20 | 30 | | 48 | 24 | 48 | 20 | 30 | | 30 | 30 | 30 | 20 | 30 | | 25 | 25 | 25 | 20 | 30 | | 24 | 24 | 24 | 20 | 30 | | 23.976 | 23.976 | 23.976 | 20 | 30 | | 15 | 15 | 15 | 20 | 30 | | 12 | 12 | 12 | 20 | 30 | | 10 | 10 | 10 | 20 | 30 | ```
+ "frameRate": 3.14, # Required. The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculate frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
"gopDuration": "A String", # Select the GOP size based on the specified duration. The default is `"3s"`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
"gopFrameCount": 42, # Select the GOP size based on the specified frame count. Must be greater than zero.
"heightPixels": 42, # The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used.
@@ -976,7 +976,7 @@
"crfLevel": 42, # Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.
"enableTwoPass": True or False, # Use two-pass encoding strategy to achieve better video quality. `VideoStream.rate_control_mode` must be `"vbr"`. The default is `false`.
"entropyCoder": "A String", # The entropy coder to use. The default is `"cabac"`. Supported entropy coders: - 'cavlc' - 'cabac'
- "frameRate": 3.14, # Required. The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. The following table shows the computed video FPS given the target FPS (in parenthesis) and input FPS (in the first column): ``` | | (30) | (60) | (25) | (50) | |--------|--------|--------|------|------| | 240 | Fail | Fail | Fail | Fail | | 120 | 30 | 60 | 20 | 30 | | 100 | 25 | 50 | 20 | 30 | | 50 | 25 | 50 | 20 | 30 | | 60 | 30 | 60 | 20 | 30 | | 59.94 | 29.97 | 59.94 | 20 | 30 | | 48 | 24 | 48 | 20 | 30 | | 30 | 30 | 30 | 20 | 30 | | 25 | 25 | 25 | 20 | 30 | | 24 | 24 | 24 | 20 | 30 | | 23.976 | 23.976 | 23.976 | 20 | 30 | | 15 | 15 | 15 | 20 | 30 | | 12 | 12 | 12 | 20 | 30 | | 10 | 10 | 10 | 20 | 30 | ```
+ "frameRate": 3.14, # Required. The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculate frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
"gopDuration": "A String", # Select the GOP size based on the specified duration. The default is `"3s"`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
"gopFrameCount": 42, # Select the GOP size based on the specified frame count. Must be greater than zero.
"heightPixels": 42, # The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used.