diff --git a/docs/dyn/alertcenter_v1beta1.alerts.html b/docs/dyn/alertcenter_v1beta1.alerts.html
index 42660ab..c8844a1 100644
--- a/docs/dyn/alertcenter_v1beta1.alerts.html
+++ b/docs/dyn/alertcenter_v1beta1.alerts.html
@@ -248,7 +248,7 @@
     &quot;updateTime&quot;: &quot;A String&quot;, # Output only. The time this metadata was last updated.
   },
   &quot;securityInvestigationToolLink&quot;: &quot;A String&quot;, # Output only. An optional [Security Investigation Tool](https://support.google.com/a/answer/7575955) query for this alert.
-  &quot;source&quot;: &quot;A String&quot;, # Required. A unique identifier for the system that reported the alert. This is output only after alert is created. Supported sources are any of the following: * Google Operations * Mobile device management * Gmail phishing * Domain wide takeout * State sponsored attack * Google identity
+  &quot;source&quot;: &quot;A String&quot;, # Required. A unique identifier for the system that reported the alert. This is output only after alert is created. Supported sources are any of the following: * Google Operations * Mobile device management * Gmail phishing * Data Loss Prevention * Domain wide takeout * State sponsored attack * Google identity
   &quot;startTime&quot;: &quot;A String&quot;, # Required. The time the event that caused this alert was started or detected.
   &quot;type&quot;: &quot;A String&quot;, # Required. The type of the alert. This is output only after alert is created. For a list of available alert types see [Google Workspace Alert types](https://developers.google.com/admin-sdk/alertcenter/reference/alert-types).
   &quot;updateTime&quot;: &quot;A String&quot;, # Output only. The time this alert was last updated.
@@ -321,7 +321,7 @@
         &quot;updateTime&quot;: &quot;A String&quot;, # Output only. The time this metadata was last updated.
       },
       &quot;securityInvestigationToolLink&quot;: &quot;A String&quot;, # Output only. An optional [Security Investigation Tool](https://support.google.com/a/answer/7575955) query for this alert.
-      &quot;source&quot;: &quot;A String&quot;, # Required. A unique identifier for the system that reported the alert. This is output only after alert is created. Supported sources are any of the following: * Google Operations * Mobile device management * Gmail phishing * Domain wide takeout * State sponsored attack * Google identity
+      &quot;source&quot;: &quot;A String&quot;, # Required. A unique identifier for the system that reported the alert. This is output only after alert is created. Supported sources are any of the following: * Google Operations * Mobile device management * Gmail phishing * Data Loss Prevention * Domain wide takeout * State sponsored attack * Google identity
       &quot;startTime&quot;: &quot;A String&quot;, # Required. The time the event that caused this alert was started or detected.
       &quot;type&quot;: &quot;A String&quot;, # Required. The type of the alert. This is output only after alert is created. For a list of available alert types see [Google Workspace Alert types](https://developers.google.com/admin-sdk/alertcenter/reference/alert-types).
       &quot;updateTime&quot;: &quot;A String&quot;, # Output only. The time this alert was last updated.
@@ -386,7 +386,7 @@
     &quot;updateTime&quot;: &quot;A String&quot;, # Output only. The time this metadata was last updated.
   },
   &quot;securityInvestigationToolLink&quot;: &quot;A String&quot;, # Output only. An optional [Security Investigation Tool](https://support.google.com/a/answer/7575955) query for this alert.
-  &quot;source&quot;: &quot;A String&quot;, # Required. A unique identifier for the system that reported the alert. This is output only after alert is created. Supported sources are any of the following: * Google Operations * Mobile device management * Gmail phishing * Domain wide takeout * State sponsored attack * Google identity
+  &quot;source&quot;: &quot;A String&quot;, # Required. A unique identifier for the system that reported the alert. This is output only after alert is created. Supported sources are any of the following: * Google Operations * Mobile device management * Gmail phishing * Data Loss Prevention * Domain wide takeout * State sponsored attack * Google identity
   &quot;startTime&quot;: &quot;A String&quot;, # Required. The time the event that caused this alert was started or detected.
   &quot;type&quot;: &quot;A String&quot;, # Required. The type of the alert. This is output only after alert is created. For a list of available alert types see [Google Workspace Alert types](https://developers.google.com/admin-sdk/alertcenter/reference/alert-types).
   &quot;updateTime&quot;: &quot;A String&quot;, # Output only. The time this alert was last updated.
diff --git a/docs/dyn/bigquery_v2.jobs.html b/docs/dyn/bigquery_v2.jobs.html
index f0a0ffa..4eaac38 100644
--- a/docs/dyn/bigquery_v2.jobs.html
+++ b/docs/dyn/bigquery_v2.jobs.html
@@ -183,7 +183,7 @@
           ],
         },
         &quot;createDisposition&quot;: &quot;A String&quot;, # [Optional] Specifies whether the job is allowed to create new tables. The following values are supported: CREATE_IF_NEEDED: If the table does not exist, BigQuery creates the table. CREATE_NEVER: The table must already exist. If it does not, a &#x27;notFound&#x27; error is returned in the job result. The default value is CREATE_IF_NEEDED. Creation, truncation and append actions occur as one atomic update upon job completion.
-        &quot;decimalTargetTypes&quot;: [ # Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC ([Preview](/products/#product-launch-stages)), and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: * (38,9) -&gt; NUMERIC; * (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); * (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); * (76,38) -&gt; BIGNUMERIC; * (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+        &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
           &quot;A String&quot;,
         ],
         &quot;destinationEncryptionConfiguration&quot;: { # Custom encryption configuration (e.g., Cloud KMS keys).
@@ -378,6 +378,9 @@
               &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
               &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
             },
+            &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+              &quot;A String&quot;,
+            ],
             &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
               &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
               &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -500,6 +503,7 @@
           &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
           &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
         },
+        &quot;dmlStats&quot;: &quot;&quot;, # [Output-only] Detailed statistics for DML statements Present only for DML statements INSERT, UPDATE, DELETE or TRUNCATE.
         &quot;estimatedBytesProcessed&quot;: &quot;A String&quot;, # [Output-only] The original estimate of bytes processed for the job.
         &quot;modelTraining&quot;: { # [Output-only, Beta] Information about create model query job progress.
           &quot;currentIteration&quot;: 42, # [Output-only, Beta] Index of current ML training iteration. Updated during create model query job to show job progress.
@@ -670,7 +674,7 @@
       &quot;startTime&quot;: &quot;A String&quot;, # [Output-only] Start time of this job, in milliseconds since the epoch. This field will be present when the job transitions from the PENDING state to either RUNNING or DONE.
       &quot;totalBytesProcessed&quot;: &quot;A String&quot;, # [Output-only] [Deprecated] Use the bytes processed in the query statistics instead.
       &quot;totalSlotMs&quot;: &quot;A String&quot;, # [Output-only] Slot-milliseconds for the job.
-      &quot;transactionInfoTemplate&quot;: { # [Output-only] [Alpha] Information of the multi-statement transaction if this job is part of one.
+      &quot;transactionInfo&quot;: { # [Output-only] [Alpha] Information of the multi-statement transaction if this job is part of one.
         &quot;transactionId&quot;: &quot;A String&quot;, # [Output-only] // [Alpha] Id of the transaction.
       },
     },
@@ -790,7 +794,7 @@
         ],
       },
       &quot;createDisposition&quot;: &quot;A String&quot;, # [Optional] Specifies whether the job is allowed to create new tables. The following values are supported: CREATE_IF_NEEDED: If the table does not exist, BigQuery creates the table. CREATE_NEVER: The table must already exist. If it does not, a &#x27;notFound&#x27; error is returned in the job result. The default value is CREATE_IF_NEEDED. Creation, truncation and append actions occur as one atomic update upon job completion.
-      &quot;decimalTargetTypes&quot;: [ # Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC ([Preview](/products/#product-launch-stages)), and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: * (38,9) -&gt; NUMERIC; * (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); * (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); * (76,38) -&gt; BIGNUMERIC; * (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+      &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
         &quot;A String&quot;,
       ],
       &quot;destinationEncryptionConfiguration&quot;: { # Custom encryption configuration (e.g., Cloud KMS keys).
@@ -985,6 +989,9 @@
             &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
             &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
           },
+          &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+            &quot;A String&quot;,
+          ],
           &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
             &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
             &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -1107,6 +1114,7 @@
         &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
         &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
       },
+      &quot;dmlStats&quot;: &quot;&quot;, # [Output-only] Detailed statistics for DML statements Present only for DML statements INSERT, UPDATE, DELETE or TRUNCATE.
       &quot;estimatedBytesProcessed&quot;: &quot;A String&quot;, # [Output-only] The original estimate of bytes processed for the job.
       &quot;modelTraining&quot;: { # [Output-only, Beta] Information about create model query job progress.
         &quot;currentIteration&quot;: 42, # [Output-only, Beta] Index of current ML training iteration. Updated during create model query job to show job progress.
@@ -1277,7 +1285,7 @@
     &quot;startTime&quot;: &quot;A String&quot;, # [Output-only] Start time of this job, in milliseconds since the epoch. This field will be present when the job transitions from the PENDING state to either RUNNING or DONE.
     &quot;totalBytesProcessed&quot;: &quot;A String&quot;, # [Output-only] [Deprecated] Use the bytes processed in the query statistics instead.
     &quot;totalSlotMs&quot;: &quot;A String&quot;, # [Output-only] Slot-milliseconds for the job.
-    &quot;transactionInfoTemplate&quot;: { # [Output-only] [Alpha] Information of the multi-statement transaction if this job is part of one.
+    &quot;transactionInfo&quot;: { # [Output-only] [Alpha] Information of the multi-statement transaction if this job is part of one.
       &quot;transactionId&quot;: &quot;A String&quot;, # [Output-only] // [Alpha] Id of the transaction.
     },
   },
@@ -1466,7 +1474,7 @@
         ],
       },
       &quot;createDisposition&quot;: &quot;A String&quot;, # [Optional] Specifies whether the job is allowed to create new tables. The following values are supported: CREATE_IF_NEEDED: If the table does not exist, BigQuery creates the table. CREATE_NEVER: The table must already exist. If it does not, a &#x27;notFound&#x27; error is returned in the job result. The default value is CREATE_IF_NEEDED. Creation, truncation and append actions occur as one atomic update upon job completion.
-      &quot;decimalTargetTypes&quot;: [ # Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC ([Preview](/products/#product-launch-stages)), and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: * (38,9) -&gt; NUMERIC; * (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); * (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); * (76,38) -&gt; BIGNUMERIC; * (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+      &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
         &quot;A String&quot;,
       ],
       &quot;destinationEncryptionConfiguration&quot;: { # Custom encryption configuration (e.g., Cloud KMS keys).
@@ -1661,6 +1669,9 @@
             &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
             &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
           },
+          &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+            &quot;A String&quot;,
+          ],
           &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
             &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
             &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -1783,6 +1794,7 @@
         &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
         &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
       },
+      &quot;dmlStats&quot;: &quot;&quot;, # [Output-only] Detailed statistics for DML statements Present only for DML statements INSERT, UPDATE, DELETE or TRUNCATE.
       &quot;estimatedBytesProcessed&quot;: &quot;A String&quot;, # [Output-only] The original estimate of bytes processed for the job.
       &quot;modelTraining&quot;: { # [Output-only, Beta] Information about create model query job progress.
         &quot;currentIteration&quot;: 42, # [Output-only, Beta] Index of current ML training iteration. Updated during create model query job to show job progress.
@@ -1953,7 +1965,7 @@
     &quot;startTime&quot;: &quot;A String&quot;, # [Output-only] Start time of this job, in milliseconds since the epoch. This field will be present when the job transitions from the PENDING state to either RUNNING or DONE.
     &quot;totalBytesProcessed&quot;: &quot;A String&quot;, # [Output-only] [Deprecated] Use the bytes processed in the query statistics instead.
     &quot;totalSlotMs&quot;: &quot;A String&quot;, # [Output-only] Slot-milliseconds for the job.
-    &quot;transactionInfoTemplate&quot;: { # [Output-only] [Alpha] Information of the multi-statement transaction if this job is part of one.
+    &quot;transactionInfo&quot;: { # [Output-only] [Alpha] Information of the multi-statement transaction if this job is part of one.
       &quot;transactionId&quot;: &quot;A String&quot;, # [Output-only] // [Alpha] Id of the transaction.
     },
   },
@@ -2048,7 +2060,7 @@
         ],
       },
       &quot;createDisposition&quot;: &quot;A String&quot;, # [Optional] Specifies whether the job is allowed to create new tables. The following values are supported: CREATE_IF_NEEDED: If the table does not exist, BigQuery creates the table. CREATE_NEVER: The table must already exist. If it does not, a &#x27;notFound&#x27; error is returned in the job result. The default value is CREATE_IF_NEEDED. Creation, truncation and append actions occur as one atomic update upon job completion.
-      &quot;decimalTargetTypes&quot;: [ # Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC ([Preview](/products/#product-launch-stages)), and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: * (38,9) -&gt; NUMERIC; * (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); * (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); * (76,38) -&gt; BIGNUMERIC; * (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+      &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
         &quot;A String&quot;,
       ],
       &quot;destinationEncryptionConfiguration&quot;: { # Custom encryption configuration (e.g., Cloud KMS keys).
@@ -2243,6 +2255,9 @@
             &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
             &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
           },
+          &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+            &quot;A String&quot;,
+          ],
           &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
             &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
             &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -2365,6 +2380,7 @@
         &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
         &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
       },
+      &quot;dmlStats&quot;: &quot;&quot;, # [Output-only] Detailed statistics for DML statements Present only for DML statements INSERT, UPDATE, DELETE or TRUNCATE.
       &quot;estimatedBytesProcessed&quot;: &quot;A String&quot;, # [Output-only] The original estimate of bytes processed for the job.
       &quot;modelTraining&quot;: { # [Output-only, Beta] Information about create model query job progress.
         &quot;currentIteration&quot;: 42, # [Output-only, Beta] Index of current ML training iteration. Updated during create model query job to show job progress.
@@ -2535,7 +2551,7 @@
     &quot;startTime&quot;: &quot;A String&quot;, # [Output-only] Start time of this job, in milliseconds since the epoch. This field will be present when the job transitions from the PENDING state to either RUNNING or DONE.
     &quot;totalBytesProcessed&quot;: &quot;A String&quot;, # [Output-only] [Deprecated] Use the bytes processed in the query statistics instead.
     &quot;totalSlotMs&quot;: &quot;A String&quot;, # [Output-only] Slot-milliseconds for the job.
-    &quot;transactionInfoTemplate&quot;: { # [Output-only] [Alpha] Information of the multi-statement transaction if this job is part of one.
+    &quot;transactionInfo&quot;: { # [Output-only] [Alpha] Information of the multi-statement transaction if this job is part of one.
       &quot;transactionId&quot;: &quot;A String&quot;, # [Output-only] // [Alpha] Id of the transaction.
     },
   },
@@ -2653,7 +2669,7 @@
             ],
           },
           &quot;createDisposition&quot;: &quot;A String&quot;, # [Optional] Specifies whether the job is allowed to create new tables. The following values are supported: CREATE_IF_NEEDED: If the table does not exist, BigQuery creates the table. CREATE_NEVER: The table must already exist. If it does not, a &#x27;notFound&#x27; error is returned in the job result. The default value is CREATE_IF_NEEDED. Creation, truncation and append actions occur as one atomic update upon job completion.
-          &quot;decimalTargetTypes&quot;: [ # Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC ([Preview](/products/#product-launch-stages)), and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: * (38,9) -&gt; NUMERIC; * (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); * (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); * (76,38) -&gt; BIGNUMERIC; * (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+          &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
             &quot;A String&quot;,
           ],
           &quot;destinationEncryptionConfiguration&quot;: { # Custom encryption configuration (e.g., Cloud KMS keys).
@@ -2848,6 +2864,9 @@
                 &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
                 &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
               },
+              &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+                &quot;A String&quot;,
+              ],
               &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
                 &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
                 &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -2975,6 +2994,7 @@
             &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
             &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
           },
+          &quot;dmlStats&quot;: &quot;&quot;, # [Output-only] Detailed statistics for DML statements Present only for DML statements INSERT, UPDATE, DELETE or TRUNCATE.
           &quot;estimatedBytesProcessed&quot;: &quot;A String&quot;, # [Output-only] The original estimate of bytes processed for the job.
           &quot;modelTraining&quot;: { # [Output-only, Beta] Information about create model query job progress.
             &quot;currentIteration&quot;: 42, # [Output-only, Beta] Index of current ML training iteration. Updated during create model query job to show job progress.
@@ -3145,7 +3165,7 @@
         &quot;startTime&quot;: &quot;A String&quot;, # [Output-only] Start time of this job, in milliseconds since the epoch. This field will be present when the job transitions from the PENDING state to either RUNNING or DONE.
         &quot;totalBytesProcessed&quot;: &quot;A String&quot;, # [Output-only] [Deprecated] Use the bytes processed in the query statistics instead.
         &quot;totalSlotMs&quot;: &quot;A String&quot;, # [Output-only] Slot-milliseconds for the job.
-        &quot;transactionInfoTemplate&quot;: { # [Output-only] [Alpha] Information of the multi-statement transaction if this job is part of one.
+        &quot;transactionInfo&quot;: { # [Output-only] [Alpha] Information of the multi-statement transaction if this job is part of one.
           &quot;transactionId&quot;: &quot;A String&quot;, # [Output-only] // [Alpha] Id of the transaction.
         },
       },
@@ -3257,6 +3277,7 @@
 
     {
   &quot;cacheHit&quot;: True or False, # Whether the query result was fetched from the query cache.
+  &quot;dmlStats&quot;: &quot;&quot;, # [Output-only] Detailed statistics for DML statements Present only for DML statements INSERT, UPDATE, DELETE or TRUNCATE.
   &quot;errors&quot;: [ # [Output-only] The first errors or warnings encountered during the running of the job. The final message includes the number of errors that caused the process to stop. Errors here do not necessarily mean that the job has completed or was unsuccessful.
     {
       &quot;debugInfo&quot;: &quot;A String&quot;, # Debugging information. This property is internal to Google and should not be used.
diff --git a/docs/dyn/bigquery_v2.tables.html b/docs/dyn/bigquery_v2.tables.html
index 5220b08..8c4f73d 100644
--- a/docs/dyn/bigquery_v2.tables.html
+++ b/docs/dyn/bigquery_v2.tables.html
@@ -184,6 +184,9 @@
       &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
     },
+    &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+      &quot;A String&quot;,
+    ],
     &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
       &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -320,12 +323,12 @@
   },
   &quot;selfLink&quot;: &quot;A String&quot;, # [Output-only] A URL that can be used to access this resource again.
   &quot;snapshotDefinition&quot;: { # [Output-only] Snapshot definition.
-    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that is snapshotted.
+    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that was snapshot.
       &quot;datasetId&quot;: &quot;A String&quot;, # [Required] The ID of the dataset containing this table.
       &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
       &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
     },
-    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot.
+    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot. This value is reported in the JSON response using RFC3339 format.
   },
   &quot;streamingBuffer&quot;: { # [Output-only] Contains information regarding this table&#x27;s streaming buffer, if one is present. This field will be absent if the table is not being streamed to or if there is no data in the streaming buffer.
     &quot;estimatedBytes&quot;: &quot;A String&quot;, # [Output-only] A lower-bound estimate of the number of bytes currently in the streaming buffer.
@@ -467,6 +470,9 @@
       &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
     },
+    &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+      &quot;A String&quot;,
+    ],
     &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
       &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -603,12 +609,12 @@
   },
   &quot;selfLink&quot;: &quot;A String&quot;, # [Output-only] A URL that can be used to access this resource again.
   &quot;snapshotDefinition&quot;: { # [Output-only] Snapshot definition.
-    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that is snapshotted.
+    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that was snapshot.
       &quot;datasetId&quot;: &quot;A String&quot;, # [Required] The ID of the dataset containing this table.
       &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
       &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
     },
-    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot.
+    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot. This value is reported in the JSON response using RFC3339 format.
   },
   &quot;streamingBuffer&quot;: { # [Output-only] Contains information regarding this table&#x27;s streaming buffer, if one is present. This field will be absent if the table is not being streamed to or if there is no data in the streaming buffer.
     &quot;estimatedBytes&quot;: &quot;A String&quot;, # [Output-only] A lower-bound estimate of the number of bytes currently in the streaming buffer.
@@ -691,6 +697,9 @@
       &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
     },
+    &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+      &quot;A String&quot;,
+    ],
     &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
       &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -827,12 +836,12 @@
   },
   &quot;selfLink&quot;: &quot;A String&quot;, # [Output-only] A URL that can be used to access this resource again.
   &quot;snapshotDefinition&quot;: { # [Output-only] Snapshot definition.
-    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that is snapshotted.
+    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that was snapshot.
       &quot;datasetId&quot;: &quot;A String&quot;, # [Required] The ID of the dataset containing this table.
       &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
       &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
     },
-    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot.
+    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot. This value is reported in the JSON response using RFC3339 format.
   },
   &quot;streamingBuffer&quot;: { # [Output-only] Contains information regarding this table&#x27;s streaming buffer, if one is present. This field will be absent if the table is not being streamed to or if there is no data in the streaming buffer.
     &quot;estimatedBytes&quot;: &quot;A String&quot;, # [Output-only] A lower-bound estimate of the number of bytes currently in the streaming buffer.
@@ -998,6 +1007,9 @@
       &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
     },
+    &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+      &quot;A String&quot;,
+    ],
     &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
       &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -1134,12 +1146,12 @@
   },
   &quot;selfLink&quot;: &quot;A String&quot;, # [Output-only] A URL that can be used to access this resource again.
   &quot;snapshotDefinition&quot;: { # [Output-only] Snapshot definition.
-    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that is snapshotted.
+    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that was snapshot.
       &quot;datasetId&quot;: &quot;A String&quot;, # [Required] The ID of the dataset containing this table.
       &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
       &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
     },
-    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot.
+    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot. This value is reported in the JSON response using RFC3339 format.
   },
   &quot;streamingBuffer&quot;: { # [Output-only] Contains information regarding this table&#x27;s streaming buffer, if one is present. This field will be absent if the table is not being streamed to or if there is no data in the streaming buffer.
     &quot;estimatedBytes&quot;: &quot;A String&quot;, # [Output-only] A lower-bound estimate of the number of bytes currently in the streaming buffer.
@@ -1222,6 +1234,9 @@
       &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
     },
+    &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+      &quot;A String&quot;,
+    ],
     &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
       &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -1358,12 +1373,12 @@
   },
   &quot;selfLink&quot;: &quot;A String&quot;, # [Output-only] A URL that can be used to access this resource again.
   &quot;snapshotDefinition&quot;: { # [Output-only] Snapshot definition.
-    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that is snapshotted.
+    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that was snapshot.
       &quot;datasetId&quot;: &quot;A String&quot;, # [Required] The ID of the dataset containing this table.
       &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
       &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
     },
-    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot.
+    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot. This value is reported in the JSON response using RFC3339 format.
   },
   &quot;streamingBuffer&quot;: { # [Output-only] Contains information regarding this table&#x27;s streaming buffer, if one is present. This field will be absent if the table is not being streamed to or if there is no data in the streaming buffer.
     &quot;estimatedBytes&quot;: &quot;A String&quot;, # [Output-only] A lower-bound estimate of the number of bytes currently in the streaming buffer.
@@ -1561,6 +1576,9 @@
       &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
     },
+    &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+      &quot;A String&quot;,
+    ],
     &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
       &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -1697,12 +1715,12 @@
   },
   &quot;selfLink&quot;: &quot;A String&quot;, # [Output-only] A URL that can be used to access this resource again.
   &quot;snapshotDefinition&quot;: { # [Output-only] Snapshot definition.
-    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that is snapshotted.
+    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that was snapshot.
       &quot;datasetId&quot;: &quot;A String&quot;, # [Required] The ID of the dataset containing this table.
       &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
       &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
     },
-    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot.
+    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot. This value is reported in the JSON response using RFC3339 format.
   },
   &quot;streamingBuffer&quot;: { # [Output-only] Contains information regarding this table&#x27;s streaming buffer, if one is present. This field will be absent if the table is not being streamed to or if there is no data in the streaming buffer.
     &quot;estimatedBytes&quot;: &quot;A String&quot;, # [Output-only] A lower-bound estimate of the number of bytes currently in the streaming buffer.
@@ -1785,6 +1803,9 @@
       &quot;quote&quot;: &quot;&quot;&quot;, # [Optional] The value that is used to quote data sections in a CSV file. BigQuery converts the string to ISO-8859-1 encoding, and then uses the first byte of the encoded string to split the data in its raw, binary state. The default value is a double-quote (&#x27;&quot;&#x27;). If your data does not contain quoted sections, set the property value to an empty string. If your data contains quoted newline characters, you must also set the allowQuotedNewlines property to true.
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a CSV file that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows in the file that should be skipped. When autodetect is on, the behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
     },
+    &quot;decimalTargetTypes&quot;: [ # [Optional] Defines the list of possible SQL data types to which the source decimal values are converted. This list and the precision and the scale parameters of the decimal field determine the target type. In the order of NUMERIC, BIGNUMERIC, and STRING, a type is picked if it is in the specified list and if it supports the precision and the scale. STRING supports all precision and scale values. If none of the listed types supports the precision and the scale, the type supporting the widest range in the specified list is picked, and if a value exceeds the supported range when reading the data, an error will be thrown. Example: Suppose the value of this field is [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;]. If (precision,scale) is: (38,9) -&gt; NUMERIC; (39,9) -&gt; BIGNUMERIC (NUMERIC cannot hold 30 integer digits); (38,10) -&gt; BIGNUMERIC (NUMERIC cannot hold 10 fractional digits); (76,38) -&gt; BIGNUMERIC; (77,38) -&gt; BIGNUMERIC (error if value exeeds supported range). This field cannot contain duplicate types. The order of the types in this field is ignored. For example, [&quot;BIGNUMERIC&quot;, &quot;NUMERIC&quot;] is the same as [&quot;NUMERIC&quot;, &quot;BIGNUMERIC&quot;] and NUMERIC always takes precedence over BIGNUMERIC. Defaults to [&quot;NUMERIC&quot;, &quot;STRING&quot;] for ORC and [&quot;NUMERIC&quot;] for the other file formats.
+      &quot;A String&quot;,
+    ],
     &quot;googleSheetsOptions&quot;: { # [Optional] Additional options if sourceFormat is set to GOOGLE_SHEETS.
       &quot;range&quot;: &quot;A String&quot;, # [Optional] Range of a sheet to query from. Only used when non-empty. Typical format: sheet_name!top_left_cell_id:bottom_right_cell_id For example: sheet1!A1:B20
       &quot;skipLeadingRows&quot;: &quot;A String&quot;, # [Optional] The number of rows at the top of a sheet that BigQuery will skip when reading the data. The default value is 0. This property is useful if you have header rows that should be skipped. When autodetect is on, behavior is the following: * skipLeadingRows unspecified - Autodetect tries to detect headers in the first row. If they are not detected, the row is read as data. Otherwise data is read starting from the second row. * skipLeadingRows is 0 - Instructs autodetect that there are no headers and data should be read starting from the first row. * skipLeadingRows = N &gt; 0 - Autodetect skips N-1 rows and tries to detect headers in row N. If headers are not detected, row N is just skipped. Otherwise row N is used to extract column names for the detected schema.
@@ -1921,12 +1942,12 @@
   },
   &quot;selfLink&quot;: &quot;A String&quot;, # [Output-only] A URL that can be used to access this resource again.
   &quot;snapshotDefinition&quot;: { # [Output-only] Snapshot definition.
-    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that is snapshotted.
+    &quot;baseTableReference&quot;: { # [Required] Reference describing the ID of the table that was snapshot.
       &quot;datasetId&quot;: &quot;A String&quot;, # [Required] The ID of the dataset containing this table.
       &quot;projectId&quot;: &quot;A String&quot;, # [Required] The ID of the project containing this table.
       &quot;tableId&quot;: &quot;A String&quot;, # [Required] The ID of the table. The ID must contain only letters (a-z, A-Z), numbers (0-9), or underscores (_). The maximum length is 1,024 characters.
     },
-    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot.
+    &quot;snapshotTime&quot;: &quot;A String&quot;, # [Required] The time at which the base table was snapshot. This value is reported in the JSON response using RFC3339 format.
   },
   &quot;streamingBuffer&quot;: { # [Output-only] Contains information regarding this table&#x27;s streaming buffer, if one is present. This field will be absent if the table is not being streamed to or if there is no data in the streaming buffer.
     &quot;estimatedBytes&quot;: &quot;A String&quot;, # [Output-only] A lower-bound estimate of the number of bytes currently in the streaming buffer.
diff --git a/docs/dyn/dataflow_v1b3.projects.jobs.html b/docs/dyn/dataflow_v1b3.projects.jobs.html
index 599fea4..66a8c64 100644
--- a/docs/dyn/dataflow_v1b3.projects.jobs.html
+++ b/docs/dyn/dataflow_v1b3.projects.jobs.html
@@ -168,7 +168,7 @@
         &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
           &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
         },
-        &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+        &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
           &quot;A String&quot;,
         ],
         &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -180,7 +180,7 @@
         },
         &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
         &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-        &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+        &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
           &quot;A String&quot;,
         ],
         &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -497,7 +497,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -509,7 +509,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -810,7 +810,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -822,7 +822,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -1130,7 +1130,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -1142,7 +1142,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -1507,7 +1507,7 @@
         &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
           &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
         },
-        &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+        &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
           &quot;A String&quot;,
         ],
         &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -1519,7 +1519,7 @@
         },
         &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
         &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-        &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+        &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
           &quot;A String&quot;,
         ],
         &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -1877,7 +1877,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -1889,7 +1889,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -2183,7 +2183,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -2195,7 +2195,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
diff --git a/docs/dyn/dataflow_v1b3.projects.locations.flexTemplates.html b/docs/dyn/dataflow_v1b3.projects.locations.flexTemplates.html
index 8b1dc76..c4eb64f 100644
--- a/docs/dyn/dataflow_v1b3.projects.locations.flexTemplates.html
+++ b/docs/dyn/dataflow_v1b3.projects.locations.flexTemplates.html
@@ -114,6 +114,7 @@
         &quot;maxWorkers&quot;: 42, # The maximum number of Google Compute Engine instances to be made available to your pipeline during execution, from 1 to 1000.
         &quot;network&quot;: &quot;A String&quot;, # Network to which VMs will be assigned. If empty or unspecified, the service will use the network &quot;default&quot;.
         &quot;numWorkers&quot;: 42, # The initial number of Google Compute Engine instances for the job.
+        &quot;sdkContainerImage&quot;: &quot;A String&quot;, # Docker registry location of container image to use for the &#x27;worker harness. Default is the container for the version of the SDK. Note this field is only valid for portable pipelines.
         &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # The email address of the service account to run the job as.
         &quot;stagingLocation&quot;: &quot;A String&quot;, # The Cloud Storage path for staging local files. Must be a valid Cloud Storage URL, beginning with `gs://`.
         &quot;subnetwork&quot;: &quot;A String&quot;, # Subnetwork to which VMs will be assigned, if desired. You can specify a subnetwork using either a complete URL or an abbreviated path. Expected to be of the form &quot;https://www.googleapis.com/compute/v1/projects/HOST_PROJECT_ID/regions/REGION/subnetworks/SUBNETWORK&quot; or &quot;regions/REGION/subnetworks/SUBNETWORK&quot;. If the subnetwork is located in a Shared VPC network, you must use the complete URL.
@@ -163,6 +164,7 @@
       &quot;maxWorkers&quot;: 42, # The maximum number of Google Compute Engine instances to be made available to your pipeline during execution, from 1 to 1000.
       &quot;network&quot;: &quot;A String&quot;, # Network to which VMs will be assigned. If empty or unspecified, the service will use the network &quot;default&quot;.
       &quot;numWorkers&quot;: 42, # The initial number of Google Compute Engine instances for the job.
+      &quot;sdkContainerImage&quot;: &quot;A String&quot;, # Docker registry location of container image to use for the &#x27;worker harness. Default is the container for the version of the SDK. Note this field is only valid for portable pipelines.
       &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # The email address of the service account to run the job as.
       &quot;stagingLocation&quot;: &quot;A String&quot;, # The Cloud Storage path for staging local files. Must be a valid Cloud Storage URL, beginning with `gs://`.
       &quot;subnetwork&quot;: &quot;A String&quot;, # Subnetwork to which VMs will be assigned, if desired. You can specify a subnetwork using either a complete URL or an abbreviated path. Expected to be of the form &quot;https://www.googleapis.com/compute/v1/projects/HOST_PROJECT_ID/regions/REGION/subnetworks/SUBNETWORK&quot; or &quot;regions/REGION/subnetworks/SUBNETWORK&quot;. If the subnetwork is located in a Shared VPC network, you must use the complete URL.
@@ -207,7 +209,7 @@
       &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
         &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
       },
-      &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+      &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
         &quot;A String&quot;,
       ],
       &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -219,7 +221,7 @@
       },
       &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
       &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-      &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+      &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
         &quot;A String&quot;,
       ],
       &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
diff --git a/docs/dyn/dataflow_v1b3.projects.locations.jobs.html b/docs/dyn/dataflow_v1b3.projects.locations.jobs.html
index 56b502b..9f9b6aa 100644
--- a/docs/dyn/dataflow_v1b3.projects.locations.jobs.html
+++ b/docs/dyn/dataflow_v1b3.projects.locations.jobs.html
@@ -157,7 +157,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -169,7 +169,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -469,7 +469,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -481,7 +481,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -789,7 +789,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -801,7 +801,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -1241,7 +1241,7 @@
         &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
           &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
         },
-        &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+        &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
           &quot;A String&quot;,
         ],
         &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -1253,7 +1253,7 @@
         },
         &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
         &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-        &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+        &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
           &quot;A String&quot;,
         ],
         &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -1613,7 +1613,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -1625,7 +1625,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -1918,7 +1918,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -1930,7 +1930,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
diff --git a/docs/dyn/dataflow_v1b3.projects.locations.templates.html b/docs/dyn/dataflow_v1b3.projects.locations.templates.html
index 3688c35..41acfa3 100644
--- a/docs/dyn/dataflow_v1b3.projects.locations.templates.html
+++ b/docs/dyn/dataflow_v1b3.projects.locations.templates.html
@@ -153,7 +153,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -165,7 +165,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -580,7 +580,7 @@
       &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
         &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
       },
-      &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+      &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
         &quot;A String&quot;,
       ],
       &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -592,7 +592,7 @@
       },
       &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
       &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-      &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+      &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
         &quot;A String&quot;,
       ],
       &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
diff --git a/docs/dyn/dataflow_v1b3.projects.templates.html b/docs/dyn/dataflow_v1b3.projects.templates.html
index 7f0db54..fd48aea 100644
--- a/docs/dyn/dataflow_v1b3.projects.templates.html
+++ b/docs/dyn/dataflow_v1b3.projects.templates.html
@@ -152,7 +152,7 @@
     &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
       &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
     },
-    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+    &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
       &quot;A String&quot;,
     ],
     &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -164,7 +164,7 @@
     },
     &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
     &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+    &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
       &quot;A String&quot;,
     ],
     &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
@@ -579,7 +579,7 @@
       &quot;debugOptions&quot;: { # Describes any options that have an effect on the debugging of pipelines. # Any debugging options to be supplied to the job.
         &quot;enableHotKeyLogging&quot;: True or False, # When true, enables the logging of the literal hot key to the user&#x27;s Cloud Logging.
       },
-      &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options. For more details see the rationale at go/user-specified-service-options.
+      &quot;experiments&quot;: [ # The list of experiments to enable. This field should be used for SDK related experiments and not for service related experiments. The proper field for service related experiments is service_options.
         &quot;A String&quot;,
       ],
       &quot;flexResourceSchedulingGoal&quot;: &quot;A String&quot;, # Which Flexible Resource Scheduling mode to run in.
@@ -591,7 +591,7 @@
       },
       &quot;serviceAccountEmail&quot;: &quot;A String&quot;, # Identity to run virtual machines as. Defaults to the default account.
       &quot;serviceKmsKeyName&quot;: &quot;A String&quot;, # If set, contains the Cloud KMS key identifier used to encrypt data at rest, AKA a Customer Managed Encryption Key (CMEK). Format: projects/PROJECT_ID/locations/LOCATION/keyRings/KEY_RING/cryptoKeys/KEY
-      &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on). For more details see the rationale at go/user-specified-service-options.
+      &quot;serviceOptions&quot;: [ # The list of service options to enable. This field should be used for service related experiments only. These experiments, when graduating to GA, should be replaced by dedicated fields or become default (i.e. always on).
         &quot;A String&quot;,
       ],
       &quot;shuffleMode&quot;: &quot;A String&quot;, # Output only. The shuffle mode used for the job.
diff --git a/docs/dyn/firestore_v1.projects.databases.documents.html b/docs/dyn/firestore_v1.projects.databases.documents.html
index 02464f5..5887319 100644
--- a/docs/dyn/firestore_v1.projects.databases.documents.html
+++ b/docs/dyn/firestore_v1.projects.databases.documents.html
@@ -175,11 +175,7 @@
     &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
     &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
       &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-        &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-          &quot;values&quot;: [ # Values in the array.
-            # Object with schema name: Value
-          ],
-        },
+        &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
         &quot;booleanValue&quot;: True or False, # A boolean value.
         &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
         &quot;doubleValue&quot;: 3.14, # A double value.
@@ -234,16 +230,31 @@
           { # A transformation of a field of the document.
             &quot;appendMissingElements&quot;: { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value.
               &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
+                { # A message that can hold any of the supported value types.
+                  &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                  &quot;booleanValue&quot;: True or False, # A boolean value.
+                  &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                  &quot;doubleValue&quot;: 3.14, # A double value.
+                  &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                    &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                    &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                  },
+                  &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                  &quot;mapValue&quot;: { # A map value. # A map value.
+                    &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                      &quot;a_key&quot;: # Object with schema name: Value
+                    },
+                  },
+                  &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                  &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                  &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                  &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+                },
               ],
             },
             &quot;fieldPath&quot;: &quot;A String&quot;, # The path of the field. See Document.fields for the field path syntax reference.
             &quot;increment&quot;: { # A message that can hold any of the supported value types. # Adds the given value to the field&#x27;s current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -263,11 +274,7 @@
               &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
             },
             &quot;maximum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -287,11 +294,7 @@
               &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
             },
             &quot;minimum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -312,7 +315,26 @@
             },
             &quot;removeAllFromArray&quot;: { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value.
               &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
+                { # A message that can hold any of the supported value types.
+                  &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                  &quot;booleanValue&quot;: True or False, # A boolean value.
+                  &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                  &quot;doubleValue&quot;: 3.14, # A double value.
+                  &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                    &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                    &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                  },
+                  &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                  &quot;mapValue&quot;: { # A map value. # A map value.
+                    &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                      &quot;a_key&quot;: # Object with schema name: Value
+                    },
+                  },
+                  &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                  &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                  &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                  &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+                },
               ],
             },
             &quot;setToServerValue&quot;: &quot;A String&quot;, # Sets the field to the given server value.
@@ -323,11 +345,7 @@
         &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
         &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
           &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -359,16 +377,31 @@
         { # A transformation of a field of the document.
           &quot;appendMissingElements&quot;: { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value.
             &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
+              { # A message that can hold any of the supported value types.
+                &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                &quot;booleanValue&quot;: True or False, # A boolean value.
+                &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                &quot;doubleValue&quot;: 3.14, # A double value.
+                &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                  &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                  &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                },
+                &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                &quot;mapValue&quot;: { # A map value. # A map value.
+                  &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                    &quot;a_key&quot;: # Object with schema name: Value
+                  },
+                },
+                &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+              },
             ],
           },
           &quot;fieldPath&quot;: &quot;A String&quot;, # The path of the field. See Document.fields for the field path syntax reference.
           &quot;increment&quot;: { # A message that can hold any of the supported value types. # Adds the given value to the field&#x27;s current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -388,11 +421,7 @@
             &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
           },
           &quot;maximum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -412,11 +441,7 @@
             &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
           },
           &quot;minimum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -437,7 +462,26 @@
           },
           &quot;removeAllFromArray&quot;: { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value.
             &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
+              { # A message that can hold any of the supported value types.
+                &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                &quot;booleanValue&quot;: True or False, # A boolean value.
+                &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                &quot;doubleValue&quot;: 3.14, # A double value.
+                &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                  &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                  &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                },
+                &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                &quot;mapValue&quot;: { # A map value. # A map value.
+                  &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                    &quot;a_key&quot;: # Object with schema name: Value
+                  },
+                },
+                &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+              },
             ],
           },
           &quot;setToServerValue&quot;: &quot;A String&quot;, # Sets the field to the given server value.
@@ -471,11 +515,7 @@
     { # The result of applying a write.
       &quot;transformResults&quot;: [ # The results of applying each DocumentTransform.FieldTransform, in the same order.
         { # A message that can hold any of the supported value types.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
@@ -563,16 +603,31 @@
           { # A transformation of a field of the document.
             &quot;appendMissingElements&quot;: { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value.
               &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
+                { # A message that can hold any of the supported value types.
+                  &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                  &quot;booleanValue&quot;: True or False, # A boolean value.
+                  &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                  &quot;doubleValue&quot;: 3.14, # A double value.
+                  &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                    &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                    &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                  },
+                  &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                  &quot;mapValue&quot;: { # A map value. # A map value.
+                    &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                      &quot;a_key&quot;: # Object with schema name: Value
+                    },
+                  },
+                  &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                  &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                  &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                  &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+                },
               ],
             },
             &quot;fieldPath&quot;: &quot;A String&quot;, # The path of the field. See Document.fields for the field path syntax reference.
             &quot;increment&quot;: { # A message that can hold any of the supported value types. # Adds the given value to the field&#x27;s current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -592,11 +647,7 @@
               &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
             },
             &quot;maximum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -616,11 +667,7 @@
               &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
             },
             &quot;minimum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -641,7 +688,26 @@
             },
             &quot;removeAllFromArray&quot;: { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value.
               &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
+                { # A message that can hold any of the supported value types.
+                  &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                  &quot;booleanValue&quot;: True or False, # A boolean value.
+                  &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                  &quot;doubleValue&quot;: 3.14, # A double value.
+                  &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                    &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                    &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                  },
+                  &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                  &quot;mapValue&quot;: { # A map value. # A map value.
+                    &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                      &quot;a_key&quot;: # Object with schema name: Value
+                    },
+                  },
+                  &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                  &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                  &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                  &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+                },
               ],
             },
             &quot;setToServerValue&quot;: &quot;A String&quot;, # Sets the field to the given server value.
@@ -652,11 +718,7 @@
         &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
         &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
           &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -688,16 +750,31 @@
         { # A transformation of a field of the document.
           &quot;appendMissingElements&quot;: { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value.
             &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
+              { # A message that can hold any of the supported value types.
+                &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                &quot;booleanValue&quot;: True or False, # A boolean value.
+                &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                &quot;doubleValue&quot;: 3.14, # A double value.
+                &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                  &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                  &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                },
+                &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                &quot;mapValue&quot;: { # A map value. # A map value.
+                  &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                    &quot;a_key&quot;: # Object with schema name: Value
+                  },
+                },
+                &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+              },
             ],
           },
           &quot;fieldPath&quot;: &quot;A String&quot;, # The path of the field. See Document.fields for the field path syntax reference.
           &quot;increment&quot;: { # A message that can hold any of the supported value types. # Adds the given value to the field&#x27;s current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -717,11 +794,7 @@
             &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
           },
           &quot;maximum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -741,11 +814,7 @@
             &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
           },
           &quot;minimum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -766,7 +835,26 @@
           },
           &quot;removeAllFromArray&quot;: { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value.
             &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
+              { # A message that can hold any of the supported value types.
+                &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                &quot;booleanValue&quot;: True or False, # A boolean value.
+                &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                &quot;doubleValue&quot;: 3.14, # A double value.
+                &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                  &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                  &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                },
+                &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                &quot;mapValue&quot;: { # A map value. # A map value.
+                  &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                    &quot;a_key&quot;: # Object with schema name: Value
+                  },
+                },
+                &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+              },
             ],
           },
           &quot;setToServerValue&quot;: &quot;A String&quot;, # Sets the field to the given server value.
@@ -790,11 +878,7 @@
     { # The result of applying a write.
       &quot;transformResults&quot;: [ # The results of applying each DocumentTransform.FieldTransform, in the same order.
         { # A message that can hold any of the supported value types.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
@@ -834,11 +918,7 @@
   &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
   &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
     &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-      &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-        &quot;values&quot;: [ # Values in the array.
-          # Object with schema name: Value
-        ],
-      },
+      &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
       &quot;booleanValue&quot;: True or False, # A boolean value.
       &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
       &quot;doubleValue&quot;: 3.14, # A double value.
@@ -876,11 +956,7 @@
   &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
   &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
     &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-      &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-        &quot;values&quot;: [ # Values in the array.
-          # Object with schema name: Value
-        ],
-      },
+      &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
       &quot;booleanValue&quot;: True or False, # A boolean value.
       &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
       &quot;doubleValue&quot;: 3.14, # A double value.
@@ -946,11 +1022,7 @@
   &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
   &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
     &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-      &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-        &quot;values&quot;: [ # Values in the array.
-          # Object with schema name: Value
-        ],
-      },
+      &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
       &quot;booleanValue&quot;: True or False, # A boolean value.
       &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
       &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1003,11 +1075,7 @@
       &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
       &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
         &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1117,11 +1185,7 @@
           &quot;before&quot;: True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query.
           &quot;values&quot;: [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause.
             { # A message that can hold any of the supported value types.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1169,11 +1233,7 @@
           &quot;before&quot;: True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query.
           &quot;values&quot;: [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause.
             { # A message that can hold any of the supported value types.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1207,11 +1267,7 @@
             },
             &quot;op&quot;: &quot;A String&quot;, # The operator to filter by.
             &quot;value&quot;: { # A message that can hold any of the supported value types. # The value to compare to.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1264,11 +1320,7 @@
       &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
       &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
         &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1354,11 +1406,7 @@
       &quot;before&quot;: True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query.
       &quot;values&quot;: [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause.
         { # A message that can hold any of the supported value types.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1406,11 +1454,7 @@
       &quot;before&quot;: True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query.
       &quot;values&quot;: [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause.
         { # A message that can hold any of the supported value types.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1444,11 +1488,7 @@
         },
         &quot;op&quot;: &quot;A String&quot;, # The operator to filter by.
         &quot;value&quot;: { # A message that can hold any of the supported value types. # The value to compare to.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1493,11 +1533,7 @@
       &quot;before&quot;: True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query.
       &quot;values&quot;: [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause.
         { # A message that can hold any of the supported value types.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1549,11 +1585,7 @@
   &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
   &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
     &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-      &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-        &quot;values&quot;: [ # Values in the array.
-          # Object with schema name: Value
-        ],
-      },
+      &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
       &quot;booleanValue&quot;: True or False, # A boolean value.
       &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
       &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1593,11 +1625,7 @@
   &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
   &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
     &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-      &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-        &quot;values&quot;: [ # Values in the array.
-          # Object with schema name: Value
-        ],
-      },
+      &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
       &quot;booleanValue&quot;: True or False, # A boolean value.
       &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
       &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1671,11 +1699,7 @@
       &quot;before&quot;: True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query.
       &quot;values&quot;: [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause.
         { # A message that can hold any of the supported value types.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1723,11 +1747,7 @@
       &quot;before&quot;: True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query.
       &quot;values&quot;: [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause.
         { # A message that can hold any of the supported value types.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1761,11 +1781,7 @@
         },
         &quot;op&quot;: &quot;A String&quot;, # The operator to filter by.
         &quot;value&quot;: { # A message that can hold any of the supported value types. # The value to compare to.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1809,11 +1825,7 @@
     &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
     &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
       &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-        &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-          &quot;values&quot;: [ # Values in the array.
-            # Object with schema name: Value
-          ],
-        },
+        &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
         &quot;booleanValue&quot;: True or False, # A boolean value.
         &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
         &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1870,16 +1882,31 @@
           { # A transformation of a field of the document.
             &quot;appendMissingElements&quot;: { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value.
               &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
+                { # A message that can hold any of the supported value types.
+                  &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                  &quot;booleanValue&quot;: True or False, # A boolean value.
+                  &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                  &quot;doubleValue&quot;: 3.14, # A double value.
+                  &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                    &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                    &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                  },
+                  &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                  &quot;mapValue&quot;: { # A map value. # A map value.
+                    &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                      &quot;a_key&quot;: # Object with schema name: Value
+                    },
+                  },
+                  &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                  &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                  &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                  &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+                },
               ],
             },
             &quot;fieldPath&quot;: &quot;A String&quot;, # The path of the field. See Document.fields for the field path syntax reference.
             &quot;increment&quot;: { # A message that can hold any of the supported value types. # Adds the given value to the field&#x27;s current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1899,11 +1926,7 @@
               &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
             },
             &quot;maximum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1923,11 +1946,7 @@
               &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
             },
             &quot;minimum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN.
-              &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-                &quot;values&quot;: [ # Values in the array.
-                  # Object with schema name: Value
-                ],
-              },
+              &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
               &quot;booleanValue&quot;: True or False, # A boolean value.
               &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
               &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1948,7 +1967,26 @@
             },
             &quot;removeAllFromArray&quot;: { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value.
               &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
+                { # A message that can hold any of the supported value types.
+                  &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                  &quot;booleanValue&quot;: True or False, # A boolean value.
+                  &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                  &quot;doubleValue&quot;: 3.14, # A double value.
+                  &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                    &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                    &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                  },
+                  &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                  &quot;mapValue&quot;: { # A map value. # A map value.
+                    &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                      &quot;a_key&quot;: # Object with schema name: Value
+                    },
+                  },
+                  &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                  &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                  &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                  &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+                },
               ],
             },
             &quot;setToServerValue&quot;: &quot;A String&quot;, # Sets the field to the given server value.
@@ -1959,11 +1997,7 @@
         &quot;createTime&quot;: &quot;A String&quot;, # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query.
         &quot;fields&quot;: { # The document&#x27;s fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `&quot;foo&quot; : { map_value: { &quot;x&amp;y&quot; : { string_value: &quot;hello&quot; }}}` would be represented by the field path `foo.x&amp;y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&amp;y` `` represents `x&amp;y` and `` `bak\`tik` `` represents `` bak`tik ``.
           &quot;a_key&quot;: { # A message that can hold any of the supported value types.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -1995,16 +2029,31 @@
         { # A transformation of a field of the document.
           &quot;appendMissingElements&quot;: { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value.
             &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
+              { # A message that can hold any of the supported value types.
+                &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                &quot;booleanValue&quot;: True or False, # A boolean value.
+                &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                &quot;doubleValue&quot;: 3.14, # A double value.
+                &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                  &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                  &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                },
+                &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                &quot;mapValue&quot;: { # A map value. # A map value.
+                  &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                    &quot;a_key&quot;: # Object with schema name: Value
+                  },
+                },
+                &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+              },
             ],
           },
           &quot;fieldPath&quot;: &quot;A String&quot;, # The path of the field. See Document.fields for the field path syntax reference.
           &quot;increment&quot;: { # A message that can hold any of the supported value types. # Adds the given value to the field&#x27;s current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -2024,11 +2073,7 @@
             &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
           },
           &quot;maximum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -2048,11 +2093,7 @@
             &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
           },
           &quot;minimum&quot;: { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN.
-            &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-              &quot;values&quot;: [ # Values in the array.
-                # Object with schema name: Value
-              ],
-            },
+            &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
             &quot;booleanValue&quot;: True or False, # A boolean value.
             &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
             &quot;doubleValue&quot;: 3.14, # A double value.
@@ -2073,7 +2114,26 @@
           },
           &quot;removeAllFromArray&quot;: { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value.
             &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
+              { # A message that can hold any of the supported value types.
+                &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
+                &quot;booleanValue&quot;: True or False, # A boolean value.
+                &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
+                &quot;doubleValue&quot;: 3.14, # A double value.
+                &quot;geoPointValue&quot;: { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth.
+                  &quot;latitude&quot;: 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+                  &quot;longitude&quot;: 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+                },
+                &quot;integerValue&quot;: &quot;A String&quot;, # An integer value.
+                &quot;mapValue&quot;: { # A map value. # A map value.
+                  &quot;fields&quot;: { # The map&#x27;s fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty.
+                    &quot;a_key&quot;: # Object with schema name: Value
+                  },
+                },
+                &quot;nullValue&quot;: &quot;A String&quot;, # A null value.
+                &quot;referenceValue&quot;: &quot;A String&quot;, # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`.
+                &quot;stringValue&quot;: &quot;A String&quot;, # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries.
+                &quot;timestampValue&quot;: &quot;A String&quot;, # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down.
+              },
             ],
           },
           &quot;setToServerValue&quot;: &quot;A String&quot;, # Sets the field to the given server value.
@@ -2099,11 +2159,7 @@
     { # The result of applying a write.
       &quot;transformResults&quot;: [ # The results of applying each DocumentTransform.FieldTransform, in the same order.
         { # A message that can hold any of the supported value types.
-          &quot;arrayValue&quot;: { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
-            &quot;values&quot;: [ # Values in the array.
-              # Object with schema name: Value
-            ],
-          },
+          &quot;arrayValue&quot;: # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array.
           &quot;booleanValue&quot;: True or False, # A boolean value.
           &quot;bytesValue&quot;: &quot;A String&quot;, # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries.
           &quot;doubleValue&quot;: 3.14, # A double value.
diff --git a/docs/dyn/metastore_v1alpha.projects.locations.services.backups.html b/docs/dyn/metastore_v1alpha.projects.locations.services.backups.html
index eb687ae..d54b89d 100644
--- a/docs/dyn/metastore_v1alpha.projects.locations.services.backups.html
+++ b/docs/dyn/metastore_v1alpha.projects.locations.services.backups.html
@@ -87,11 +87,20 @@
   <code><a href="#get">get(name, x__xgafv=None)</a></code></p>
 <p class="firstline">Gets details of a single backup.</p>
 <p class="toc_element">
+  <code><a href="#getIamPolicy">getIamPolicy(resource, options_requestedPolicyVersion=None, x__xgafv=None)</a></code></p>
+<p class="firstline">Gets the access control policy for a resource. Returns an empty policy if the resource exists and does not have a policy set.</p>
+<p class="toc_element">
   <code><a href="#list">list(parent, filter=None, orderBy=None, pageSize=None, pageToken=None, x__xgafv=None)</a></code></p>
 <p class="firstline">Lists backups in a service.</p>
 <p class="toc_element">
   <code><a href="#list_next">list_next(previous_request, previous_response)</a></code></p>
 <p class="firstline">Retrieves the next page of results.</p>
+<p class="toc_element">
+  <code><a href="#setIamPolicy">setIamPolicy(resource, body=None, x__xgafv=None)</a></code></p>
+<p class="firstline">Sets the access control policy on the specified resource. Replaces any existing policy.Can return NOT_FOUND, INVALID_ARGUMENT, and PERMISSION_DENIED errors.</p>
+<p class="toc_element">
+  <code><a href="#testIamPermissions">testIamPermissions(resource, body=None, x__xgafv=None)</a></code></p>
+<p class="firstline">Returns permissions that a caller has on the specified resource. If the resource does not exist, this will return an empty set of permissions, not a NOT_FOUND error.Note: This operation is designed to be used for building permission-aware UIs and command-line tools, not for authorization checking. This operation may "fail open" without warning.</p>
 <h3>Method Details</h3>
 <div class="method">
     <code class="details" id="close">close()</code>
@@ -326,6 +335,54 @@
 </div>
 
 <div class="method">
+    <code class="details" id="getIamPolicy">getIamPolicy(resource, options_requestedPolicyVersion=None, x__xgafv=None)</code>
+  <pre>Gets the access control policy for a resource. Returns an empty policy if the resource exists and does not have a policy set.
+
+Args:
+  resource: string, REQUIRED: The resource for which the policy is being requested. See the operation documentation for the appropriate value for this field. (required)
+  options_requestedPolicyVersion: integer, Optional. The policy format version to be returned.Valid values are 0, 1, and 3. Requests specifying an invalid value will be rejected.Requests for policies with any conditional bindings must specify version 3. Policies without any conditional bindings may specify any valid value or leave the field unset.To learn which resources support conditions in their IAM policies, see the IAM documentation (https://cloud.google.com/iam/help/conditions/resource-policies).
+  x__xgafv: string, V1 error format.
+    Allowed values
+      1 - v1 error format
+      2 - v2 error format
+
+Returns:
+  An object of the form:
+
+    { # An Identity and Access Management (IAM) policy, which specifies access controls for Google Cloud resources.A Policy is a collection of bindings. A binding binds one or more members to a single role. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A role is a named list of permissions; each role can be an IAM predefined role or a user-created custom role.For some types of Google Cloud resources, a binding can also specify a condition, which is a logical expression that allows access to a resource only if the expression evaluates to true. A condition can add constraints based on attributes of the request, the resource, or both. To learn which resources support conditions in their IAM policies, see the IAM documentation (https://cloud.google.com/iam/help/conditions/resource-policies).JSON example: { &quot;bindings&quot;: [ { &quot;role&quot;: &quot;roles/resourcemanager.organizationAdmin&quot;, &quot;members&quot;: [ &quot;user:mike@example.com&quot;, &quot;group:admins@example.com&quot;, &quot;domain:google.com&quot;, &quot;serviceAccount:my-project-id@appspot.gserviceaccount.com&quot; ] }, { &quot;role&quot;: &quot;roles/resourcemanager.organizationViewer&quot;, &quot;members&quot;: [ &quot;user:eve@example.com&quot; ], &quot;condition&quot;: { &quot;title&quot;: &quot;expirable access&quot;, &quot;description&quot;: &quot;Does not grant access after Sep 2020&quot;, &quot;expression&quot;: &quot;request.time &lt; timestamp(&#x27;2020-10-01T00:00:00.000Z&#x27;)&quot;, } } ], &quot;etag&quot;: &quot;BwWWja0YfJA=&quot;, &quot;version&quot;: 3 } YAML example: bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time &lt; timestamp(&#x27;2020-10-01T00:00:00.000Z&#x27;) - etag: BwWWja0YfJA= - version: 3 For a description of IAM and its features, see the IAM documentation (https://cloud.google.com/iam/docs/).
+  &quot;auditConfigs&quot;: [ # Specifies cloud audit logging configuration for this policy.
+    { # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.If there are AuditConfigs for both allServices and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.Example Policy with multiple AuditConfigs: { &quot;audit_configs&quot;: [ { &quot;service&quot;: &quot;allServices&quot;, &quot;audit_log_configs&quot;: [ { &quot;log_type&quot;: &quot;DATA_READ&quot;, &quot;exempted_members&quot;: [ &quot;user:jose@example.com&quot; ] }, { &quot;log_type&quot;: &quot;DATA_WRITE&quot; }, { &quot;log_type&quot;: &quot;ADMIN_READ&quot; } ] }, { &quot;service&quot;: &quot;sampleservice.googleapis.com&quot;, &quot;audit_log_configs&quot;: [ { &quot;log_type&quot;: &quot;DATA_READ&quot; }, { &quot;log_type&quot;: &quot;DATA_WRITE&quot;, &quot;exempted_members&quot;: [ &quot;user:aliya@example.com&quot; ] } ] } ] } For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
+      &quot;auditLogConfigs&quot;: [ # The configuration for logging of each type of permission.
+        { # Provides the configuration for logging a type of permissions. Example: { &quot;audit_log_configs&quot;: [ { &quot;log_type&quot;: &quot;DATA_READ&quot;, &quot;exempted_members&quot;: [ &quot;user:jose@example.com&quot; ] }, { &quot;log_type&quot;: &quot;DATA_WRITE&quot; } ] } This enables &#x27;DATA_READ&#x27; and &#x27;DATA_WRITE&#x27; logging, while exempting jose@example.com from DATA_READ logging.
+          &quot;exemptedMembers&quot;: [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of Binding.members.
+            &quot;A String&quot;,
+          ],
+          &quot;logType&quot;: &quot;A String&quot;, # The log type that this config enables.
+        },
+      ],
+      &quot;service&quot;: &quot;A String&quot;, # Specifies a service that will be enabled for audit logging. For example, storage.googleapis.com, cloudsql.googleapis.com. allServices is a special value that covers all services.
+    },
+  ],
+  &quot;bindings&quot;: [ # Associates a list of members to a role. Optionally, may specify a condition that determines how and when the bindings are applied. Each of the bindings must contain at least one member.
+    { # Associates members with a role.
+      &quot;condition&quot;: { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec.Example (Comparison): title: &quot;Summary size limit&quot; description: &quot;Determines if a summary is less than 100 chars&quot; expression: &quot;document.summary.size() &lt; 100&quot; Example (Equality): title: &quot;Requestor is owner&quot; description: &quot;Determines if requestor is the document owner&quot; expression: &quot;document.owner == request.auth.claims.email&quot; Example (Logic): title: &quot;Public documents&quot; description: &quot;Determine whether the document should be publicly visible&quot; expression: &quot;document.type != &#x27;private&#x27; &amp;&amp; document.type != &#x27;internal&#x27;&quot; Example (Data Manipulation): title: &quot;Notification string&quot; description: &quot;Create a notification string with a timestamp.&quot; expression: &quot;&#x27;New message received at &#x27; + string(document.create_time)&quot; The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # The condition that is associated with this binding.If the condition evaluates to true, then this binding applies to the current request.If the condition evaluates to false, then this binding does not apply to the current request. However, a different role binding might grant the same role to one or more of the members in this binding.To learn which resources support conditions in their IAM policies, see the IAM documentation (https://cloud.google.com/iam/help/conditions/resource-policies).
+        &quot;description&quot;: &quot;A String&quot;, # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
+        &quot;expression&quot;: &quot;A String&quot;, # Textual representation of an expression in Common Expression Language syntax.
+        &quot;location&quot;: &quot;A String&quot;, # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
+        &quot;title&quot;: &quot;A String&quot;, # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
+      },
+      &quot;members&quot;: [ # Specifies the identities requesting access for a Cloud Platform resource. members can have the following values: allUsers: A special identifier that represents anyone who is on the internet; with or without a Google account. allAuthenticatedUsers: A special identifier that represents anyone who is authenticated with a Google account or a service account. user:{emailid}: An email address that represents a specific Google account. For example, alice@example.com . serviceAccount:{emailid}: An email address that represents a service account. For example, my-other-app@appspot.gserviceaccount.com. group:{emailid}: An email address that represents a Google group. For example, admins@example.com. deleted:user:{emailid}?uid={uniqueid}: An email address (plus unique identifier) representing a user that has been recently deleted. For example, alice@example.com?uid=123456789012345678901. If the user is recovered, this value reverts to user:{emailid} and the recovered user retains the role in the binding. deleted:serviceAccount:{emailid}?uid={uniqueid}: An email address (plus unique identifier) representing a service account that has been recently deleted. For example, my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901. If the service account is undeleted, this value reverts to serviceAccount:{emailid} and the undeleted service account retains the role in the binding. deleted:group:{emailid}?uid={uniqueid}: An email address (plus unique identifier) representing a Google group that has been recently deleted. For example, admins@example.com?uid=123456789012345678901. If the group is recovered, this value reverts to group:{emailid} and the recovered group retains the role in the binding. domain:{domain}: The G Suite domain (primary) that represents all the users of that domain. For example, google.com or example.com.
+        &quot;A String&quot;,
+      ],
+      &quot;role&quot;: &quot;A String&quot;, # Role that is assigned to members. For example, roles/viewer, roles/editor, or roles/owner.
+    },
+  ],
+  &quot;etag&quot;: &quot;A String&quot;, # etag is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the etag in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An etag is returned in the response to getIamPolicy, and systems are expected to put that etag in the request to setIamPolicy to ensure that their change will be applied to the same version of the policy.Important: If you use IAM Conditions, you must include the etag field whenever you call setIamPolicy. If you omit this field, then IAM allows you to overwrite a version 3 policy with a version 1 policy, and all of the conditions in the version 3 policy are lost.
+  &quot;version&quot;: 42, # Specifies the format of the policy.Valid values are 0, 1, and 3. Requests that specify an invalid value are rejected.Any operation that affects conditional role bindings must specify version 3. This requirement applies to the following operations: Getting a policy that includes a conditional role binding Adding a conditional role binding to a policy Changing a conditional role binding in a policy Removing any role binding, with or without a condition, from a policy that includes conditionsImportant: If you use IAM Conditions, you must include the etag field whenever you call setIamPolicy. If you omit this field, then IAM allows you to overwrite a version 3 policy with a version 1 policy, and all of the conditions in the version 3 policy are lost.If a policy does not include any conditions, operations on that policy may specify any valid version or leave the field unset.To learn which resources support conditions in their IAM policies, see the IAM documentation (https://cloud.google.com/iam/help/conditions/resource-policies).
+}</pre>
+</div>
+
+<div class="method">
     <code class="details" id="list">list(parent, filter=None, orderBy=None, pageSize=None, pageToken=None, x__xgafv=None)</code>
   <pre>Lists backups in a service.
 
@@ -434,4 +491,119 @@
     </pre>
 </div>
 
+<div class="method">
+    <code class="details" id="setIamPolicy">setIamPolicy(resource, body=None, x__xgafv=None)</code>
+  <pre>Sets the access control policy on the specified resource. Replaces any existing policy.Can return NOT_FOUND, INVALID_ARGUMENT, and PERMISSION_DENIED errors.
+
+Args:
+  resource: string, REQUIRED: The resource for which the policy is being specified. See the operation documentation for the appropriate value for this field. (required)
+  body: object, The request body.
+    The object takes the form of:
+
+{ # Request message for SetIamPolicy method.
+  &quot;policy&quot;: { # An Identity and Access Management (IAM) policy, which specifies access controls for Google Cloud resources.A Policy is a collection of bindings. A binding binds one or more members to a single role. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A role is a named list of permissions; each role can be an IAM predefined role or a user-created custom role.For some types of Google Cloud resources, a binding can also specify a condition, which is a logical expression that allows access to a resource only if the expression evaluates to true. A condition can add constraints based on attributes of the request, the resource, or both. To learn which resources support conditions in their IAM policies, see the IAM documentation (https://cloud.google.com/iam/help/conditions/resource-policies).JSON example: { &quot;bindings&quot;: [ { &quot;role&quot;: &quot;roles/resourcemanager.organizationAdmin&quot;, &quot;members&quot;: [ &quot;user:mike@example.com&quot;, &quot;group:admins@example.com&quot;, &quot;domain:google.com&quot;, &quot;serviceAccount:my-project-id@appspot.gserviceaccount.com&quot; ] }, { &quot;role&quot;: &quot;roles/resourcemanager.organizationViewer&quot;, &quot;members&quot;: [ &quot;user:eve@example.com&quot; ], &quot;condition&quot;: { &quot;title&quot;: &quot;expirable access&quot;, &quot;description&quot;: &quot;Does not grant access after Sep 2020&quot;, &quot;expression&quot;: &quot;request.time &lt; timestamp(&#x27;2020-10-01T00:00:00.000Z&#x27;)&quot;, } } ], &quot;etag&quot;: &quot;BwWWja0YfJA=&quot;, &quot;version&quot;: 3 } YAML example: bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time &lt; timestamp(&#x27;2020-10-01T00:00:00.000Z&#x27;) - etag: BwWWja0YfJA= - version: 3 For a description of IAM and its features, see the IAM documentation (https://cloud.google.com/iam/docs/). # REQUIRED: The complete policy to be applied to the resource. The size of the policy is limited to a few 10s of KB. An empty policy is a valid policy but certain Cloud Platform services (such as Projects) might reject them.
+    &quot;auditConfigs&quot;: [ # Specifies cloud audit logging configuration for this policy.
+      { # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.If there are AuditConfigs for both allServices and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.Example Policy with multiple AuditConfigs: { &quot;audit_configs&quot;: [ { &quot;service&quot;: &quot;allServices&quot;, &quot;audit_log_configs&quot;: [ { &quot;log_type&quot;: &quot;DATA_READ&quot;, &quot;exempted_members&quot;: [ &quot;user:jose@example.com&quot; ] }, { &quot;log_type&quot;: &quot;DATA_WRITE&quot; }, { &quot;log_type&quot;: &quot;ADMIN_READ&quot; } ] }, { &quot;service&quot;: &quot;sampleservice.googleapis.com&quot;, &quot;audit_log_configs&quot;: [ { &quot;log_type&quot;: &quot;DATA_READ&quot; }, { &quot;log_type&quot;: &quot;DATA_WRITE&quot;, &quot;exempted_members&quot;: [ &quot;user:aliya@example.com&quot; ] } ] } ] } For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
+        &quot;auditLogConfigs&quot;: [ # The configuration for logging of each type of permission.
+          { # Provides the configuration for logging a type of permissions. Example: { &quot;audit_log_configs&quot;: [ { &quot;log_type&quot;: &quot;DATA_READ&quot;, &quot;exempted_members&quot;: [ &quot;user:jose@example.com&quot; ] }, { &quot;log_type&quot;: &quot;DATA_WRITE&quot; } ] } This enables &#x27;DATA_READ&#x27; and &#x27;DATA_WRITE&#x27; logging, while exempting jose@example.com from DATA_READ logging.
+            &quot;exemptedMembers&quot;: [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of Binding.members.
+              &quot;A String&quot;,
+            ],
+            &quot;logType&quot;: &quot;A String&quot;, # The log type that this config enables.
+          },
+        ],
+        &quot;service&quot;: &quot;A String&quot;, # Specifies a service that will be enabled for audit logging. For example, storage.googleapis.com, cloudsql.googleapis.com. allServices is a special value that covers all services.
+      },
+    ],
+    &quot;bindings&quot;: [ # Associates a list of members to a role. Optionally, may specify a condition that determines how and when the bindings are applied. Each of the bindings must contain at least one member.
+      { # Associates members with a role.
+        &quot;condition&quot;: { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec.Example (Comparison): title: &quot;Summary size limit&quot; description: &quot;Determines if a summary is less than 100 chars&quot; expression: &quot;document.summary.size() &lt; 100&quot; Example (Equality): title: &quot;Requestor is owner&quot; description: &quot;Determines if requestor is the document owner&quot; expression: &quot;document.owner == request.auth.claims.email&quot; Example (Logic): title: &quot;Public documents&quot; description: &quot;Determine whether the document should be publicly visible&quot; expression: &quot;document.type != &#x27;private&#x27; &amp;&amp; document.type != &#x27;internal&#x27;&quot; Example (Data Manipulation): title: &quot;Notification string&quot; description: &quot;Create a notification string with a timestamp.&quot; expression: &quot;&#x27;New message received at &#x27; + string(document.create_time)&quot; The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # The condition that is associated with this binding.If the condition evaluates to true, then this binding applies to the current request.If the condition evaluates to false, then this binding does not apply to the current request. However, a different role binding might grant the same role to one or more of the members in this binding.To learn which resources support conditions in their IAM policies, see the IAM documentation (https://cloud.google.com/iam/help/conditions/resource-policies).
+          &quot;description&quot;: &quot;A String&quot;, # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
+          &quot;expression&quot;: &quot;A String&quot;, # Textual representation of an expression in Common Expression Language syntax.
+          &quot;location&quot;: &quot;A String&quot;, # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
+          &quot;title&quot;: &quot;A String&quot;, # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
+        },
+        &quot;members&quot;: [ # Specifies the identities requesting access for a Cloud Platform resource. members can have the following values: allUsers: A special identifier that represents anyone who is on the internet; with or without a Google account. allAuthenticatedUsers: A special identifier that represents anyone who is authenticated with a Google account or a service account. user:{emailid}: An email address that represents a specific Google account. For example, alice@example.com . serviceAccount:{emailid}: An email address that represents a service account. For example, my-other-app@appspot.gserviceaccount.com. group:{emailid}: An email address that represents a Google group. For example, admins@example.com. deleted:user:{emailid}?uid={uniqueid}: An email address (plus unique identifier) representing a user that has been recently deleted. For example, alice@example.com?uid=123456789012345678901. If the user is recovered, this value reverts to user:{emailid} and the recovered user retains the role in the binding. deleted:serviceAccount:{emailid}?uid={uniqueid}: An email address (plus unique identifier) representing a service account that has been recently deleted. For example, my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901. If the service account is undeleted, this value reverts to serviceAccount:{emailid} and the undeleted service account retains the role in the binding. deleted:group:{emailid}?uid={uniqueid}: An email address (plus unique identifier) representing a Google group that has been recently deleted. For example, admins@example.com?uid=123456789012345678901. If the group is recovered, this value reverts to group:{emailid} and the recovered group retains the role in the binding. domain:{domain}: The G Suite domain (primary) that represents all the users of that domain. For example, google.com or example.com.
+          &quot;A String&quot;,
+        ],
+        &quot;role&quot;: &quot;A String&quot;, # Role that is assigned to members. For example, roles/viewer, roles/editor, or roles/owner.
+      },
+    ],
+    &quot;etag&quot;: &quot;A String&quot;, # etag is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the etag in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An etag is returned in the response to getIamPolicy, and systems are expected to put that etag in the request to setIamPolicy to ensure that their change will be applied to the same version of the policy.Important: If you use IAM Conditions, you must include the etag field whenever you call setIamPolicy. If you omit this field, then IAM allows you to overwrite a version 3 policy with a version 1 policy, and all of the conditions in the version 3 policy are lost.
+    &quot;version&quot;: 42, # Specifies the format of the policy.Valid values are 0, 1, and 3. Requests that specify an invalid value are rejected.Any operation that affects conditional role bindings must specify version 3. This requirement applies to the following operations: Getting a policy that includes a conditional role binding Adding a conditional role binding to a policy Changing a conditional role binding in a policy Removing any role binding, with or without a condition, from a policy that includes conditionsImportant: If you use IAM Conditions, you must include the etag field whenever you call setIamPolicy. If you omit this field, then IAM allows you to overwrite a version 3 policy with a version 1 policy, and all of the conditions in the version 3 policy are lost.If a policy does not include any conditions, operations on that policy may specify any valid version or leave the field unset.To learn which resources support conditions in their IAM policies, see the IAM documentation (https://cloud.google.com/iam/help/conditions/resource-policies).
+  },
+  &quot;updateMask&quot;: &quot;A String&quot;, # OPTIONAL: A FieldMask specifying which fields of the policy to modify. Only the fields in the mask will be modified. If no mask is provided, the following default mask is used:paths: &quot;bindings, etag&quot;
+}
+
+  x__xgafv: string, V1 error format.
+    Allowed values
+      1 - v1 error format
+      2 - v2 error format
+
+Returns:
+  An object of the form:
+
+    { # An Identity and Access Management (IAM) policy, which specifies access controls for Google Cloud resources.A Policy is a collection of bindings. A binding binds one or more members to a single role. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A role is a named list of permissions; each role can be an IAM predefined role or a user-created custom role.For some types of Google Cloud resources, a binding can also specify a condition, which is a logical expression that allows access to a resource only if the expression evaluates to true. A condition can add constraints based on attributes of the request, the resource, or both. To learn which resources support conditions in their IAM policies, see the IAM documentation (https://cloud.google.com/iam/help/conditions/resource-policies).JSON example: { &quot;bindings&quot;: [ { &quot;role&quot;: &quot;roles/resourcemanager.organizationAdmin&quot;, &quot;members&quot;: [ &quot;user:mike@example.com&quot;, &quot;group:admins@example.com&quot;, &quot;domain:google.com&quot;, &quot;serviceAccount:my-project-id@appspot.gserviceaccount.com&quot; ] }, { &quot;role&quot;: &quot;roles/resourcemanager.organizationViewer&quot;, &quot;members&quot;: [ &quot;user:eve@example.com&quot; ], &quot;condition&quot;: { &quot;title&quot;: &quot;expirable access&quot;, &quot;description&quot;: &quot;Does not grant access after Sep 2020&quot;, &quot;expression&quot;: &quot;request.time &lt; timestamp(&#x27;2020-10-01T00:00:00.000Z&#x27;)&quot;, } } ], &quot;etag&quot;: &quot;BwWWja0YfJA=&quot;, &quot;version&quot;: 3 } YAML example: bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time &lt; timestamp(&#x27;2020-10-01T00:00:00.000Z&#x27;) - etag: BwWWja0YfJA= - version: 3 For a description of IAM and its features, see the IAM documentation (https://cloud.google.com/iam/docs/).
+  &quot;auditConfigs&quot;: [ # Specifies cloud audit logging configuration for this policy.
+    { # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.If there are AuditConfigs for both allServices and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.Example Policy with multiple AuditConfigs: { &quot;audit_configs&quot;: [ { &quot;service&quot;: &quot;allServices&quot;, &quot;audit_log_configs&quot;: [ { &quot;log_type&quot;: &quot;DATA_READ&quot;, &quot;exempted_members&quot;: [ &quot;user:jose@example.com&quot; ] }, { &quot;log_type&quot;: &quot;DATA_WRITE&quot; }, { &quot;log_type&quot;: &quot;ADMIN_READ&quot; } ] }, { &quot;service&quot;: &quot;sampleservice.googleapis.com&quot;, &quot;audit_log_configs&quot;: [ { &quot;log_type&quot;: &quot;DATA_READ&quot; }, { &quot;log_type&quot;: &quot;DATA_WRITE&quot;, &quot;exempted_members&quot;: [ &quot;user:aliya@example.com&quot; ] } ] } ] } For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
+      &quot;auditLogConfigs&quot;: [ # The configuration for logging of each type of permission.
+        { # Provides the configuration for logging a type of permissions. Example: { &quot;audit_log_configs&quot;: [ { &quot;log_type&quot;: &quot;DATA_READ&quot;, &quot;exempted_members&quot;: [ &quot;user:jose@example.com&quot; ] }, { &quot;log_type&quot;: &quot;DATA_WRITE&quot; } ] } This enables &#x27;DATA_READ&#x27; and &#x27;DATA_WRITE&#x27; logging, while exempting jose@example.com from DATA_READ logging.
+          &quot;exemptedMembers&quot;: [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of Binding.members.
+            &quot;A String&quot;,
+          ],
+          &quot;logType&quot;: &quot;A String&quot;, # The log type that this config enables.
+        },
+      ],
+      &quot;service&quot;: &quot;A String&quot;, # Specifies a service that will be enabled for audit logging. For example, storage.googleapis.com, cloudsql.googleapis.com. allServices is a special value that covers all services.
+    },
+  ],
+  &quot;bindings&quot;: [ # Associates a list of members to a role. Optionally, may specify a condition that determines how and when the bindings are applied. Each of the bindings must contain at least one member.
+    { # Associates members with a role.
+      &quot;condition&quot;: { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec.Example (Comparison): title: &quot;Summary size limit&quot; description: &quot;Determines if a summary is less than 100 chars&quot; expression: &quot;document.summary.size() &lt; 100&quot; Example (Equality): title: &quot;Requestor is owner&quot; description: &quot;Determines if requestor is the document owner&quot; expression: &quot;document.owner == request.auth.claims.email&quot; Example (Logic): title: &quot;Public documents&quot; description: &quot;Determine whether the document should be publicly visible&quot; expression: &quot;document.type != &#x27;private&#x27; &amp;&amp; document.type != &#x27;internal&#x27;&quot; Example (Data Manipulation): title: &quot;Notification string&quot; description: &quot;Create a notification string with a timestamp.&quot; expression: &quot;&#x27;New message received at &#x27; + string(document.create_time)&quot; The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # The condition that is associated with this binding.If the condition evaluates to true, then this binding applies to the current request.If the condition evaluates to false, then this binding does not apply to the current request. However, a different role binding might grant the same role to one or more of the members in this binding.To learn which resources support conditions in their IAM policies, see the IAM documentation (https://cloud.google.com/iam/help/conditions/resource-policies).
+        &quot;description&quot;: &quot;A String&quot;, # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
+        &quot;expression&quot;: &quot;A String&quot;, # Textual representation of an expression in Common Expression Language syntax.
+        &quot;location&quot;: &quot;A String&quot;, # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
+        &quot;title&quot;: &quot;A String&quot;, # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
+      },
+      &quot;members&quot;: [ # Specifies the identities requesting access for a Cloud Platform resource. members can have the following values: allUsers: A special identifier that represents anyone who is on the internet; with or without a Google account. allAuthenticatedUsers: A special identifier that represents anyone who is authenticated with a Google account or a service account. user:{emailid}: An email address that represents a specific Google account. For example, alice@example.com . serviceAccount:{emailid}: An email address that represents a service account. For example, my-other-app@appspot.gserviceaccount.com. group:{emailid}: An email address that represents a Google group. For example, admins@example.com. deleted:user:{emailid}?uid={uniqueid}: An email address (plus unique identifier) representing a user that has been recently deleted. For example, alice@example.com?uid=123456789012345678901. If the user is recovered, this value reverts to user:{emailid} and the recovered user retains the role in the binding. deleted:serviceAccount:{emailid}?uid={uniqueid}: An email address (plus unique identifier) representing a service account that has been recently deleted. For example, my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901. If the service account is undeleted, this value reverts to serviceAccount:{emailid} and the undeleted service account retains the role in the binding. deleted:group:{emailid}?uid={uniqueid}: An email address (plus unique identifier) representing a Google group that has been recently deleted. For example, admins@example.com?uid=123456789012345678901. If the group is recovered, this value reverts to group:{emailid} and the recovered group retains the role in the binding. domain:{domain}: The G Suite domain (primary) that represents all the users of that domain. For example, google.com or example.com.
+        &quot;A String&quot;,
+      ],
+      &quot;role&quot;: &quot;A String&quot;, # Role that is assigned to members. For example, roles/viewer, roles/editor, or roles/owner.
+    },
+  ],
+  &quot;etag&quot;: &quot;A String&quot;, # etag is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the etag in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An etag is returned in the response to getIamPolicy, and systems are expected to put that etag in the request to setIamPolicy to ensure that their change will be applied to the same version of the policy.Important: If you use IAM Conditions, you must include the etag field whenever you call setIamPolicy. If you omit this field, then IAM allows you to overwrite a version 3 policy with a version 1 policy, and all of the conditions in the version 3 policy are lost.
+  &quot;version&quot;: 42, # Specifies the format of the policy.Valid values are 0, 1, and 3. Requests that specify an invalid value are rejected.Any operation that affects conditional role bindings must specify version 3. This requirement applies to the following operations: Getting a policy that includes a conditional role binding Adding a conditional role binding to a policy Changing a conditional role binding in a policy Removing any role binding, with or without a condition, from a policy that includes conditionsImportant: If you use IAM Conditions, you must include the etag field whenever you call setIamPolicy. If you omit this field, then IAM allows you to overwrite a version 3 policy with a version 1 policy, and all of the conditions in the version 3 policy are lost.If a policy does not include any conditions, operations on that policy may specify any valid version or leave the field unset.To learn which resources support conditions in their IAM policies, see the IAM documentation (https://cloud.google.com/iam/help/conditions/resource-policies).
+}</pre>
+</div>
+
+<div class="method">
+    <code class="details" id="testIamPermissions">testIamPermissions(resource, body=None, x__xgafv=None)</code>
+  <pre>Returns permissions that a caller has on the specified resource. If the resource does not exist, this will return an empty set of permissions, not a NOT_FOUND error.Note: This operation is designed to be used for building permission-aware UIs and command-line tools, not for authorization checking. This operation may &quot;fail open&quot; without warning.
+
+Args:
+  resource: string, REQUIRED: The resource for which the policy detail is being requested. See the operation documentation for the appropriate value for this field. (required)
+  body: object, The request body.
+    The object takes the form of:
+
+{ # Request message for TestIamPermissions method.
+  &quot;permissions&quot;: [ # The set of permissions to check for the resource. Permissions with wildcards (such as &#x27;*&#x27; or &#x27;storage.*&#x27;) are not allowed. For more information see IAM Overview (https://cloud.google.com/iam/docs/overview#permissions).
+    &quot;A String&quot;,
+  ],
+}
+
+  x__xgafv: string, V1 error format.
+    Allowed values
+      1 - v1 error format
+      2 - v2 error format
+
+Returns:
+  An object of the form:
+
+    { # Response message for TestIamPermissions method.
+  &quot;permissions&quot;: [ # A subset of TestPermissionsRequest.permissions that the caller is allowed.
+    &quot;A String&quot;,
+  ],
+}</pre>
+</div>
+
 </body></html>
\ No newline at end of file