chore: Update discovery artifacts (#1195)
* chore(accesscontextmanager): update the api
* chore(adexchangebuyer2): update the api
* chore(admin): update the api
* chore(alertcenter): update the api
* chore(analyticsadmin): update the api
* chore(analyticsdata): update the api
* chore(androidmanagement): update the api
* chore(apigateway): update the api
* chore(apigee): update the api
* chore(appengine): update the api
* chore(area120tables): update the api
* chore(artifactregistry): update the api
* chore(bigquery): update the api
* chore(bigqueryconnection): update the api
* chore(bigqueryreservation): update the api
* chore(billingbudgets): update the api
* chore(binaryauthorization): update the api
* chore(blogger): update the api
* chore(calendar): update the api
* chore(chat): update the api
* chore(cloudasset): update the api
* chore(cloudbuild): update the api
* chore(cloudfunctions): update the api
* chore(cloudidentity): update the api
* chore(cloudkms): update the api
* chore(cloudresourcemanager): update the api
* chore(cloudscheduler): update the api
* chore(cloudtasks): update the api
* chore(composer): update the api
* chore(compute): update the api
* chore(container): update the api
* chore(containeranalysis): update the api
* chore(content): update the api
* chore(datacatalog): update the api
* chore(dataflow): update the api
* chore(datafusion): update the api
* chore(datamigration): update the api
* chore(dataproc): update the api
* chore(deploymentmanager): update the api
* chore(dialogflow): update the api
* chore(displayvideo): update the api
* chore(dlp): update the api
* chore(dns): update the api
* chore(documentai): update the api
* chore(eventarc): update the api
* chore(file): update the api
* chore(firebaseml): update the api
* chore(games): update the api
* chore(gameservices): update the api
* chore(genomics): update the api
* chore(healthcare): update the api
* chore(homegraph): update the api
* chore(iam): update the api
* chore(iap): update the api
* chore(jobs): update the api
* chore(lifesciences): update the api
* chore(localservices): update the api
* chore(managedidentities): update the api
* chore(manufacturers): update the api
* chore(memcache): update the api
* chore(ml): update the api
* chore(monitoring): update the api
* chore(notebooks): update the api
* chore(osconfig): update the api
* chore(pagespeedonline): update the api
* chore(people): update the api
* chore(privateca): update the api
* chore(prod_tt_sasportal): update the api
* chore(pubsub): update the api
* chore(pubsublite): update the api
* chore(recommender): update the api
* chore(remotebuildexecution): update the api
* chore(reseller): update the api
* chore(run): update the api
* chore(safebrowsing): update the api
* chore(sasportal): update the api
* chore(searchconsole): update the api
* chore(secretmanager): update the api
* chore(securitycenter): update the api
* chore(serviceconsumermanagement): update the api
* chore(servicecontrol): update the api
* chore(servicenetworking): update the api
* chore(serviceusage): update the api
* chore(sheets): update the api
* chore(slides): update the api
* chore(spanner): update the api
* chore(speech): update the api
* chore(sqladmin): update the api
* chore(storage): update the api
* chore(storagetransfer): update the api
* chore(sts): update the api
* chore(tagmanager): update the api
* chore(testing): update the api
* chore(toolresults): update the api
* chore(transcoder): update the api
* chore(vectortile): update the api
* chore(videointelligence): update the api
* chore(vision): update the api
* chore(webmasters): update the api
* chore(workflowexecutions): update the api
* chore(youtube): update the api
diff --git a/docs/dyn/compute_alpha.targetPools.html b/docs/dyn/compute_alpha.targetPools.html
index 58f5879..24b0adb 100644
--- a/docs/dyn/compute_alpha.targetPools.html
+++ b/docs/dyn/compute_alpha.targetPools.html
@@ -183,7 +183,52 @@
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "metadata": { # `Any` contains an arbitrary serialized protocol buffer message along with a URL that describes the type of the serialized message. # [Output Only] Service-specific metadata attached to this operation.
+ #
+ # Protobuf library provides support to pack/unpack Any values in the form of utility functions or additional generated methods of the Any type.
+ #
+ # Example 1: Pack and unpack a message in C++.
+ #
+ # Foo foo = ...; Any any; any.PackFrom(foo); ... if (any.UnpackTo(&foo)) { ... }
+ #
+ # Example 2: Pack and unpack a message in Java.
+ #
+ # Foo foo = ...; Any any = Any.pack(foo); ... if (any.is(Foo.class)) { foo = any.unpack(Foo.class); }
+ #
+ # Example 3: Pack and unpack a message in Python.
+ #
+ # foo = Foo(...) any = Any() any.Pack(foo) ... if any.Is(Foo.DESCRIPTOR): any.Unpack(foo) ...
+ #
+ # Example 4: Pack and unpack a message in Go
+ #
+ # foo := &pb.Foo{...} any, err := anypb.New(foo) if err != nil { ... } ... foo := &pb.Foo{} if err := any.UnmarshalTo(foo); err != nil { ... }
+ #
+ # The pack methods provided by protobuf library will by default use 'type.googleapis.com/full.type.name' as the type URL and the unpack methods only use the fully qualified type name after the last '/' in the type URL, for example "foo.bar.com/x/y.z" will yield type name "y.z".
+ #
+ #
+ #
+ # JSON ==== The JSON representation of an `Any` value uses the regular representation of the deserialized, embedded message, with an additional field `@type` which contains the type URL. Example:
+ #
+ # package google.profile; message Person { string first_name = 1; string last_name = 2; }
+ #
+ # { "@type": "type.googleapis.com/google.profile.Person", "firstName": , "lastName": }
+ #
+ # If the embedded message type is well-known and has a custom JSON representation, that representation will be embedded adding a field `value` which holds the custom JSON in addition to the `@type` field. Example (for message [google.protobuf.Duration][]):
+ #
+ # { "@type": "type.googleapis.com/google.protobuf.Duration", "value": "1.212s" }
+ "typeUrl": "A String", # A URL/resource name that uniquely identifies the type of the serialized protocol buffer message. This string must contain at least one "/" character. The last segment of the URL's path must represent the fully qualified name of the type (as in `path/google.protobuf.Duration`). The name should be in a canonical form (e.g., leading "." is not accepted).
+ #
+ # In practice, teams usually precompile into the binary all types that they expect it to use in the context of Any. However, for URLs which use the scheme `http`, `https`, or no scheme, one can optionally set up a type server that maps type URLs to message definitions as follows:
+ #
+ # * If no scheme is provided, `https` is assumed. * An HTTP GET on the URL must yield a [google.protobuf.Type][] value in binary format, or produce an error. * Applications are allowed to cache lookup results based on the URL, or have them precompiled into a binary to avoid any lookup. Therefore, binary compatibility needs to be preserved on changes to types. (Use versioned type names to manage breaking changes.)
+ #
+ # Note: this functionality is not currently available in the official protobuf release, and it is not used for type URLs beginning with type.googleapis.com.
+ #
+ # Schemes other than `http`, `https` (or the empty scheme) might be used with implementation specific semantics.
+ "value": "A String", # Must be a valid serialized protocol buffer of the above specified type.
+ },
"name": "A String", # [Output Only] Name of the operation.
+ "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
@@ -275,7 +320,52 @@
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "metadata": { # `Any` contains an arbitrary serialized protocol buffer message along with a URL that describes the type of the serialized message. # [Output Only] Service-specific metadata attached to this operation.
+ #
+ # Protobuf library provides support to pack/unpack Any values in the form of utility functions or additional generated methods of the Any type.
+ #
+ # Example 1: Pack and unpack a message in C++.
+ #
+ # Foo foo = ...; Any any; any.PackFrom(foo); ... if (any.UnpackTo(&foo)) { ... }
+ #
+ # Example 2: Pack and unpack a message in Java.
+ #
+ # Foo foo = ...; Any any = Any.pack(foo); ... if (any.is(Foo.class)) { foo = any.unpack(Foo.class); }
+ #
+ # Example 3: Pack and unpack a message in Python.
+ #
+ # foo = Foo(...) any = Any() any.Pack(foo) ... if any.Is(Foo.DESCRIPTOR): any.Unpack(foo) ...
+ #
+ # Example 4: Pack and unpack a message in Go
+ #
+ # foo := &pb.Foo{...} any, err := anypb.New(foo) if err != nil { ... } ... foo := &pb.Foo{} if err := any.UnmarshalTo(foo); err != nil { ... }
+ #
+ # The pack methods provided by protobuf library will by default use 'type.googleapis.com/full.type.name' as the type URL and the unpack methods only use the fully qualified type name after the last '/' in the type URL, for example "foo.bar.com/x/y.z" will yield type name "y.z".
+ #
+ #
+ #
+ # JSON ==== The JSON representation of an `Any` value uses the regular representation of the deserialized, embedded message, with an additional field `@type` which contains the type URL. Example:
+ #
+ # package google.profile; message Person { string first_name = 1; string last_name = 2; }
+ #
+ # { "@type": "type.googleapis.com/google.profile.Person", "firstName": , "lastName": }
+ #
+ # If the embedded message type is well-known and has a custom JSON representation, that representation will be embedded adding a field `value` which holds the custom JSON in addition to the `@type` field. Example (for message [google.protobuf.Duration][]):
+ #
+ # { "@type": "type.googleapis.com/google.protobuf.Duration", "value": "1.212s" }
+ "typeUrl": "A String", # A URL/resource name that uniquely identifies the type of the serialized protocol buffer message. This string must contain at least one "/" character. The last segment of the URL's path must represent the fully qualified name of the type (as in `path/google.protobuf.Duration`). The name should be in a canonical form (e.g., leading "." is not accepted).
+ #
+ # In practice, teams usually precompile into the binary all types that they expect it to use in the context of Any. However, for URLs which use the scheme `http`, `https`, or no scheme, one can optionally set up a type server that maps type URLs to message definitions as follows:
+ #
+ # * If no scheme is provided, `https` is assumed. * An HTTP GET on the URL must yield a [google.protobuf.Type][] value in binary format, or produce an error. * Applications are allowed to cache lookup results based on the URL, or have them precompiled into a binary to avoid any lookup. Therefore, binary compatibility needs to be preserved on changes to types. (Use versioned type names to manage breaking changes.)
+ #
+ # Note: this functionality is not currently available in the official protobuf release, and it is not used for type URLs beginning with type.googleapis.com.
+ #
+ # Schemes other than `http`, `https` (or the empty scheme) might be used with implementation specific semantics.
+ "value": "A String", # Must be a valid serialized protocol buffer of the above specified type.
+ },
"name": "A String", # [Output Only] Name of the operation.
+ "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
@@ -325,7 +415,7 @@
Currently, only sorting by `name` or `creationTimestamp desc` is supported.
pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
- returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false and the logic is the same as today.
+ returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
Returns:
An object of the form:
@@ -350,7 +440,7 @@
# If set, backupPool must also be set. They together define the fallback behavior of the primary target pool: if the ratio of the healthy instances in the primary pool is at or below this number, traffic arriving at the load-balanced IP will be directed to the backup pool.
#
# In case where failoverRatio is not set or all the instances in the backup pool are unhealthy, the traffic will be directed back to the primary pool in the "force" mode, where traffic will be spread to the healthy instances with the best effort, or to all instances when no instance is healthy.
- "healthChecks": [ # The URL of the HttpHealthCheck resource. A member instance in this pool is considered healthy if and only if the health checks pass. An empty list means all member instances will be considered healthy at all times. Only legacy HttpHealthChecks are supported. Only one health check may be specified.
+ "healthChecks": [ # The URL of the HttpHealthCheck resource. A member instance in this pool is considered healthy if and only if the health checks pass. Only legacy HttpHealthChecks are supported. Only one health check may be specified.
"A String",
],
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
@@ -469,7 +559,52 @@
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "metadata": { # `Any` contains an arbitrary serialized protocol buffer message along with a URL that describes the type of the serialized message. # [Output Only] Service-specific metadata attached to this operation.
+ #
+ # Protobuf library provides support to pack/unpack Any values in the form of utility functions or additional generated methods of the Any type.
+ #
+ # Example 1: Pack and unpack a message in C++.
+ #
+ # Foo foo = ...; Any any; any.PackFrom(foo); ... if (any.UnpackTo(&foo)) { ... }
+ #
+ # Example 2: Pack and unpack a message in Java.
+ #
+ # Foo foo = ...; Any any = Any.pack(foo); ... if (any.is(Foo.class)) { foo = any.unpack(Foo.class); }
+ #
+ # Example 3: Pack and unpack a message in Python.
+ #
+ # foo = Foo(...) any = Any() any.Pack(foo) ... if any.Is(Foo.DESCRIPTOR): any.Unpack(foo) ...
+ #
+ # Example 4: Pack and unpack a message in Go
+ #
+ # foo := &pb.Foo{...} any, err := anypb.New(foo) if err != nil { ... } ... foo := &pb.Foo{} if err := any.UnmarshalTo(foo); err != nil { ... }
+ #
+ # The pack methods provided by protobuf library will by default use 'type.googleapis.com/full.type.name' as the type URL and the unpack methods only use the fully qualified type name after the last '/' in the type URL, for example "foo.bar.com/x/y.z" will yield type name "y.z".
+ #
+ #
+ #
+ # JSON ==== The JSON representation of an `Any` value uses the regular representation of the deserialized, embedded message, with an additional field `@type` which contains the type URL. Example:
+ #
+ # package google.profile; message Person { string first_name = 1; string last_name = 2; }
+ #
+ # { "@type": "type.googleapis.com/google.profile.Person", "firstName": , "lastName": }
+ #
+ # If the embedded message type is well-known and has a custom JSON representation, that representation will be embedded adding a field `value` which holds the custom JSON in addition to the `@type` field. Example (for message [google.protobuf.Duration][]):
+ #
+ # { "@type": "type.googleapis.com/google.protobuf.Duration", "value": "1.212s" }
+ "typeUrl": "A String", # A URL/resource name that uniquely identifies the type of the serialized protocol buffer message. This string must contain at least one "/" character. The last segment of the URL's path must represent the fully qualified name of the type (as in `path/google.protobuf.Duration`). The name should be in a canonical form (e.g., leading "." is not accepted).
+ #
+ # In practice, teams usually precompile into the binary all types that they expect it to use in the context of Any. However, for URLs which use the scheme `http`, `https`, or no scheme, one can optionally set up a type server that maps type URLs to message definitions as follows:
+ #
+ # * If no scheme is provided, `https` is assumed. * An HTTP GET on the URL must yield a [google.protobuf.Type][] value in binary format, or produce an error. * Applications are allowed to cache lookup results based on the URL, or have them precompiled into a binary to avoid any lookup. Therefore, binary compatibility needs to be preserved on changes to types. (Use versioned type names to manage breaking changes.)
+ #
+ # Note: this functionality is not currently available in the official protobuf release, and it is not used for type URLs beginning with type.googleapis.com.
+ #
+ # Schemes other than `http`, `https` (or the empty scheme) might be used with implementation specific semantics.
+ "value": "A String", # Must be a valid serialized protocol buffer of the above specified type.
+ },
"name": "A String", # [Output Only] Name of the operation.
+ "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
@@ -525,7 +660,7 @@
# If set, backupPool must also be set. They together define the fallback behavior of the primary target pool: if the ratio of the healthy instances in the primary pool is at or below this number, traffic arriving at the load-balanced IP will be directed to the backup pool.
#
# In case where failoverRatio is not set or all the instances in the backup pool are unhealthy, the traffic will be directed back to the primary pool in the "force" mode, where traffic will be spread to the healthy instances with the best effort, or to all instances when no instance is healthy.
- "healthChecks": [ # The URL of the HttpHealthCheck resource. A member instance in this pool is considered healthy if and only if the health checks pass. An empty list means all member instances will be considered healthy at all times. Only legacy HttpHealthChecks are supported. Only one health check may be specified.
+ "healthChecks": [ # The URL of the HttpHealthCheck resource. A member instance in this pool is considered healthy if and only if the health checks pass. Only legacy HttpHealthChecks are supported. Only one health check may be specified.
"A String",
],
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
@@ -571,8 +706,10 @@
},
"healthState": "A String", # Health state of the instance.
"instance": "A String", # URL of the instance resource.
- "ipAddress": "A String", # A forwarding rule IP address assigned to this instance.
+ "ipAddress": "A String", # For target pool based Network Load Balancing, it indicates the forwarding rule's IP address assigned to this instance. For other types of load balancing, the field indicates VM internal ip.
"port": 42, # The named port of the instance group, not necessarily the port that is health-checked.
+ "weight": "A String",
+ "weightError": "A String",
},
],
"kind": "compute#targetPoolInstanceHealth", # [Output Only] Type of resource. Always compute#targetPoolInstanceHealth when checking the health of an instance.
@@ -604,7 +741,7 @@
# If set, backupPool must also be set. They together define the fallback behavior of the primary target pool: if the ratio of the healthy instances in the primary pool is at or below this number, traffic arriving at the load-balanced IP will be directed to the backup pool.
#
# In case where failoverRatio is not set or all the instances in the backup pool are unhealthy, the traffic will be directed back to the primary pool in the "force" mode, where traffic will be spread to the healthy instances with the best effort, or to all instances when no instance is healthy.
- "healthChecks": [ # The URL of the HttpHealthCheck resource. A member instance in this pool is considered healthy if and only if the health checks pass. An empty list means all member instances will be considered healthy at all times. Only legacy HttpHealthChecks are supported. Only one health check may be specified.
+ "healthChecks": [ # The URL of the HttpHealthCheck resource. A member instance in this pool is considered healthy if and only if the health checks pass. Only legacy HttpHealthChecks are supported. Only one health check may be specified.
"A String",
],
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
@@ -663,7 +800,52 @@
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "metadata": { # `Any` contains an arbitrary serialized protocol buffer message along with a URL that describes the type of the serialized message. # [Output Only] Service-specific metadata attached to this operation.
+ #
+ # Protobuf library provides support to pack/unpack Any values in the form of utility functions or additional generated methods of the Any type.
+ #
+ # Example 1: Pack and unpack a message in C++.
+ #
+ # Foo foo = ...; Any any; any.PackFrom(foo); ... if (any.UnpackTo(&foo)) { ... }
+ #
+ # Example 2: Pack and unpack a message in Java.
+ #
+ # Foo foo = ...; Any any = Any.pack(foo); ... if (any.is(Foo.class)) { foo = any.unpack(Foo.class); }
+ #
+ # Example 3: Pack and unpack a message in Python.
+ #
+ # foo = Foo(...) any = Any() any.Pack(foo) ... if any.Is(Foo.DESCRIPTOR): any.Unpack(foo) ...
+ #
+ # Example 4: Pack and unpack a message in Go
+ #
+ # foo := &pb.Foo{...} any, err := anypb.New(foo) if err != nil { ... } ... foo := &pb.Foo{} if err := any.UnmarshalTo(foo); err != nil { ... }
+ #
+ # The pack methods provided by protobuf library will by default use 'type.googleapis.com/full.type.name' as the type URL and the unpack methods only use the fully qualified type name after the last '/' in the type URL, for example "foo.bar.com/x/y.z" will yield type name "y.z".
+ #
+ #
+ #
+ # JSON ==== The JSON representation of an `Any` value uses the regular representation of the deserialized, embedded message, with an additional field `@type` which contains the type URL. Example:
+ #
+ # package google.profile; message Person { string first_name = 1; string last_name = 2; }
+ #
+ # { "@type": "type.googleapis.com/google.profile.Person", "firstName": , "lastName": }
+ #
+ # If the embedded message type is well-known and has a custom JSON representation, that representation will be embedded adding a field `value` which holds the custom JSON in addition to the `@type` field. Example (for message [google.protobuf.Duration][]):
+ #
+ # { "@type": "type.googleapis.com/google.protobuf.Duration", "value": "1.212s" }
+ "typeUrl": "A String", # A URL/resource name that uniquely identifies the type of the serialized protocol buffer message. This string must contain at least one "/" character. The last segment of the URL's path must represent the fully qualified name of the type (as in `path/google.protobuf.Duration`). The name should be in a canonical form (e.g., leading "." is not accepted).
+ #
+ # In practice, teams usually precompile into the binary all types that they expect it to use in the context of Any. However, for URLs which use the scheme `http`, `https`, or no scheme, one can optionally set up a type server that maps type URLs to message definitions as follows:
+ #
+ # * If no scheme is provided, `https` is assumed. * An HTTP GET on the URL must yield a [google.protobuf.Type][] value in binary format, or produce an error. * Applications are allowed to cache lookup results based on the URL, or have them precompiled into a binary to avoid any lookup. Therefore, binary compatibility needs to be preserved on changes to types. (Use versioned type names to manage breaking changes.)
+ #
+ # Note: this functionality is not currently available in the official protobuf release, and it is not used for type URLs beginning with type.googleapis.com.
+ #
+ # Schemes other than `http`, `https` (or the empty scheme) might be used with implementation specific semantics.
+ "value": "A String", # Must be a valid serialized protocol buffer of the above specified type.
+ },
"name": "A String", # [Output Only] Name of the operation.
+ "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
@@ -713,7 +895,7 @@
Currently, only sorting by `name` or `creationTimestamp desc` is supported.
pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
- returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false and the logic is the same as today.
+ returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
Returns:
An object of the form:
@@ -736,7 +918,7 @@
# If set, backupPool must also be set. They together define the fallback behavior of the primary target pool: if the ratio of the healthy instances in the primary pool is at or below this number, traffic arriving at the load-balanced IP will be directed to the backup pool.
#
# In case where failoverRatio is not set or all the instances in the backup pool are unhealthy, the traffic will be directed back to the primary pool in the "force" mode, where traffic will be spread to the healthy instances with the best effort, or to all instances when no instance is healthy.
- "healthChecks": [ # The URL of the HttpHealthCheck resource. A member instance in this pool is considered healthy if and only if the health checks pass. An empty list means all member instances will be considered healthy at all times. Only legacy HttpHealthChecks are supported. Only one health check may be specified.
+ "healthChecks": [ # The URL of the HttpHealthCheck resource. A member instance in this pool is considered healthy if and only if the health checks pass. Only legacy HttpHealthChecks are supported. Only one health check may be specified.
"A String",
],
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
@@ -851,7 +1033,52 @@
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "metadata": { # `Any` contains an arbitrary serialized protocol buffer message along with a URL that describes the type of the serialized message. # [Output Only] Service-specific metadata attached to this operation.
+ #
+ # Protobuf library provides support to pack/unpack Any values in the form of utility functions or additional generated methods of the Any type.
+ #
+ # Example 1: Pack and unpack a message in C++.
+ #
+ # Foo foo = ...; Any any; any.PackFrom(foo); ... if (any.UnpackTo(&foo)) { ... }
+ #
+ # Example 2: Pack and unpack a message in Java.
+ #
+ # Foo foo = ...; Any any = Any.pack(foo); ... if (any.is(Foo.class)) { foo = any.unpack(Foo.class); }
+ #
+ # Example 3: Pack and unpack a message in Python.
+ #
+ # foo = Foo(...) any = Any() any.Pack(foo) ... if any.Is(Foo.DESCRIPTOR): any.Unpack(foo) ...
+ #
+ # Example 4: Pack and unpack a message in Go
+ #
+ # foo := &pb.Foo{...} any, err := anypb.New(foo) if err != nil { ... } ... foo := &pb.Foo{} if err := any.UnmarshalTo(foo); err != nil { ... }
+ #
+ # The pack methods provided by protobuf library will by default use 'type.googleapis.com/full.type.name' as the type URL and the unpack methods only use the fully qualified type name after the last '/' in the type URL, for example "foo.bar.com/x/y.z" will yield type name "y.z".
+ #
+ #
+ #
+ # JSON ==== The JSON representation of an `Any` value uses the regular representation of the deserialized, embedded message, with an additional field `@type` which contains the type URL. Example:
+ #
+ # package google.profile; message Person { string first_name = 1; string last_name = 2; }
+ #
+ # { "@type": "type.googleapis.com/google.profile.Person", "firstName": , "lastName": }
+ #
+ # If the embedded message type is well-known and has a custom JSON representation, that representation will be embedded adding a field `value` which holds the custom JSON in addition to the `@type` field. Example (for message [google.protobuf.Duration][]):
+ #
+ # { "@type": "type.googleapis.com/google.protobuf.Duration", "value": "1.212s" }
+ "typeUrl": "A String", # A URL/resource name that uniquely identifies the type of the serialized protocol buffer message. This string must contain at least one "/" character. The last segment of the URL's path must represent the fully qualified name of the type (as in `path/google.protobuf.Duration`). The name should be in a canonical form (e.g., leading "." is not accepted).
+ #
+ # In practice, teams usually precompile into the binary all types that they expect it to use in the context of Any. However, for URLs which use the scheme `http`, `https`, or no scheme, one can optionally set up a type server that maps type URLs to message definitions as follows:
+ #
+ # * If no scheme is provided, `https` is assumed. * An HTTP GET on the URL must yield a [google.protobuf.Type][] value in binary format, or produce an error. * Applications are allowed to cache lookup results based on the URL, or have them precompiled into a binary to avoid any lookup. Therefore, binary compatibility needs to be preserved on changes to types. (Use versioned type names to manage breaking changes.)
+ #
+ # Note: this functionality is not currently available in the official protobuf release, and it is not used for type URLs beginning with type.googleapis.com.
+ #
+ # Schemes other than `http`, `https` (or the empty scheme) might be used with implementation specific semantics.
+ "value": "A String", # Must be a valid serialized protocol buffer of the above specified type.
+ },
"name": "A String", # [Output Only] Name of the operation.
+ "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
@@ -940,7 +1167,52 @@
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "metadata": { # `Any` contains an arbitrary serialized protocol buffer message along with a URL that describes the type of the serialized message. # [Output Only] Service-specific metadata attached to this operation.
+ #
+ # Protobuf library provides support to pack/unpack Any values in the form of utility functions or additional generated methods of the Any type.
+ #
+ # Example 1: Pack and unpack a message in C++.
+ #
+ # Foo foo = ...; Any any; any.PackFrom(foo); ... if (any.UnpackTo(&foo)) { ... }
+ #
+ # Example 2: Pack and unpack a message in Java.
+ #
+ # Foo foo = ...; Any any = Any.pack(foo); ... if (any.is(Foo.class)) { foo = any.unpack(Foo.class); }
+ #
+ # Example 3: Pack and unpack a message in Python.
+ #
+ # foo = Foo(...) any = Any() any.Pack(foo) ... if any.Is(Foo.DESCRIPTOR): any.Unpack(foo) ...
+ #
+ # Example 4: Pack and unpack a message in Go
+ #
+ # foo := &pb.Foo{...} any, err := anypb.New(foo) if err != nil { ... } ... foo := &pb.Foo{} if err := any.UnmarshalTo(foo); err != nil { ... }
+ #
+ # The pack methods provided by protobuf library will by default use 'type.googleapis.com/full.type.name' as the type URL and the unpack methods only use the fully qualified type name after the last '/' in the type URL, for example "foo.bar.com/x/y.z" will yield type name "y.z".
+ #
+ #
+ #
+ # JSON ==== The JSON representation of an `Any` value uses the regular representation of the deserialized, embedded message, with an additional field `@type` which contains the type URL. Example:
+ #
+ # package google.profile; message Person { string first_name = 1; string last_name = 2; }
+ #
+ # { "@type": "type.googleapis.com/google.profile.Person", "firstName": , "lastName": }
+ #
+ # If the embedded message type is well-known and has a custom JSON representation, that representation will be embedded adding a field `value` which holds the custom JSON in addition to the `@type` field. Example (for message [google.protobuf.Duration][]):
+ #
+ # { "@type": "type.googleapis.com/google.protobuf.Duration", "value": "1.212s" }
+ "typeUrl": "A String", # A URL/resource name that uniquely identifies the type of the serialized protocol buffer message. This string must contain at least one "/" character. The last segment of the URL's path must represent the fully qualified name of the type (as in `path/google.protobuf.Duration`). The name should be in a canonical form (e.g., leading "." is not accepted).
+ #
+ # In practice, teams usually precompile into the binary all types that they expect it to use in the context of Any. However, for URLs which use the scheme `http`, `https`, or no scheme, one can optionally set up a type server that maps type URLs to message definitions as follows:
+ #
+ # * If no scheme is provided, `https` is assumed. * An HTTP GET on the URL must yield a [google.protobuf.Type][] value in binary format, or produce an error. * Applications are allowed to cache lookup results based on the URL, or have them precompiled into a binary to avoid any lookup. Therefore, binary compatibility needs to be preserved on changes to types. (Use versioned type names to manage breaking changes.)
+ #
+ # Note: this functionality is not currently available in the official protobuf release, and it is not used for type URLs beginning with type.googleapis.com.
+ #
+ # Schemes other than `http`, `https` (or the empty scheme) might be used with implementation specific semantics.
+ "value": "A String", # Must be a valid serialized protocol buffer of the above specified type.
+ },
"name": "A String", # [Output Only] Name of the operation.
+ "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
@@ -1026,7 +1298,52 @@
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "metadata": { # `Any` contains an arbitrary serialized protocol buffer message along with a URL that describes the type of the serialized message. # [Output Only] Service-specific metadata attached to this operation.
+ #
+ # Protobuf library provides support to pack/unpack Any values in the form of utility functions or additional generated methods of the Any type.
+ #
+ # Example 1: Pack and unpack a message in C++.
+ #
+ # Foo foo = ...; Any any; any.PackFrom(foo); ... if (any.UnpackTo(&foo)) { ... }
+ #
+ # Example 2: Pack and unpack a message in Java.
+ #
+ # Foo foo = ...; Any any = Any.pack(foo); ... if (any.is(Foo.class)) { foo = any.unpack(Foo.class); }
+ #
+ # Example 3: Pack and unpack a message in Python.
+ #
+ # foo = Foo(...) any = Any() any.Pack(foo) ... if any.Is(Foo.DESCRIPTOR): any.Unpack(foo) ...
+ #
+ # Example 4: Pack and unpack a message in Go
+ #
+ # foo := &pb.Foo{...} any, err := anypb.New(foo) if err != nil { ... } ... foo := &pb.Foo{} if err := any.UnmarshalTo(foo); err != nil { ... }
+ #
+ # The pack methods provided by protobuf library will by default use 'type.googleapis.com/full.type.name' as the type URL and the unpack methods only use the fully qualified type name after the last '/' in the type URL, for example "foo.bar.com/x/y.z" will yield type name "y.z".
+ #
+ #
+ #
+ # JSON ==== The JSON representation of an `Any` value uses the regular representation of the deserialized, embedded message, with an additional field `@type` which contains the type URL. Example:
+ #
+ # package google.profile; message Person { string first_name = 1; string last_name = 2; }
+ #
+ # { "@type": "type.googleapis.com/google.profile.Person", "firstName": , "lastName": }
+ #
+ # If the embedded message type is well-known and has a custom JSON representation, that representation will be embedded adding a field `value` which holds the custom JSON in addition to the `@type` field. Example (for message [google.protobuf.Duration][]):
+ #
+ # { "@type": "type.googleapis.com/google.protobuf.Duration", "value": "1.212s" }
+ "typeUrl": "A String", # A URL/resource name that uniquely identifies the type of the serialized protocol buffer message. This string must contain at least one "/" character. The last segment of the URL's path must represent the fully qualified name of the type (as in `path/google.protobuf.Duration`). The name should be in a canonical form (e.g., leading "." is not accepted).
+ #
+ # In practice, teams usually precompile into the binary all types that they expect it to use in the context of Any. However, for URLs which use the scheme `http`, `https`, or no scheme, one can optionally set up a type server that maps type URLs to message definitions as follows:
+ #
+ # * If no scheme is provided, `https` is assumed. * An HTTP GET on the URL must yield a [google.protobuf.Type][] value in binary format, or produce an error. * Applications are allowed to cache lookup results based on the URL, or have them precompiled into a binary to avoid any lookup. Therefore, binary compatibility needs to be preserved on changes to types. (Use versioned type names to manage breaking changes.)
+ #
+ # Note: this functionality is not currently available in the official protobuf release, and it is not used for type URLs beginning with type.googleapis.com.
+ #
+ # Schemes other than `http`, `https` (or the empty scheme) might be used with implementation specific semantics.
+ "value": "A String", # Must be a valid serialized protocol buffer of the above specified type.
+ },
"name": "A String", # [Output Only] Name of the operation.
+ "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.