docs: update generated docs (#981)
diff --git a/docs/dyn/streetviewpublish_v1.photo.html b/docs/dyn/streetviewpublish_v1.photo.html
index 5502fb6..a294ef3 100644
--- a/docs/dyn/streetviewpublish_v1.photo.html
+++ b/docs/dyn/streetviewpublish_v1.photo.html
@@ -81,7 +81,7 @@
<code><a href="#delete">delete(photoId, x__xgafv=None)</a></code></p>
<p class="firstline">Deletes a Photo and its metadata.</p>
<p class="toc_element">
- <code><a href="#get">get(photoId, languageCode=None, view=None, x__xgafv=None)</a></code></p>
+ <code><a href="#get">get(photoId, view=None, languageCode=None, x__xgafv=None)</a></code></p>
<p class="firstline">Gets the metadata of the specified</p>
<p class="toc_element">
<code><a href="#startUpload">startUpload(body=None, x__xgafv=None)</a></code></p>
@@ -117,9 +117,165 @@
The object takes the form of:
{ # Photo is used to store 360 photos along with photo metadata.
+ "photoId": { # Identifier for a Photo. # Required when updating a photo. Output only when creating a photo.
+ # Identifier for the photo, which is unique among all photos in
+ # Google.
+ "id": "A String", # Required. A unique identifier for a photo.
+ },
+ "places": [ # Places where this photo belongs.
+ { # Place metadata for an entity.
+ "name": "A String", # Output-only. The name of the place, localized to the language_code.
+ "languageCode": "A String", # Output-only. The language_code that the name is localized with. This should
+ # be the language_code specified in the request, but may be a fallback.
+ "placeId": "A String", # Place identifier, as described in
+ # https://developers.google.com/places/place-id.
+ },
+ ],
+ "downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only
+ # when
+ # GetPhotoRequest.view
+ # is set to
+ # PhotoView.INCLUDE_DOWNLOAD_URL.
+ "captureTime": "A String", # Absolute time when the photo was captured.
+ # When the photo has no exif timestamp, this is used to set a timestamp in
+ # the photo metadata.
+ "shareLink": "A String", # Output only. The share link for the photo.
+ "pose": { # Raw pose measurement for an entity. # Pose of the photo.
+ "heading": 3.14, # Compass heading, measured at the center of the photo in degrees clockwise
+ # from North. Value must be >=0 and <360.
+ # NaN indicates an unmeasured quantity.
+ "level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
+ "name": "A String", # Required. A name assigned to this Level, restricted to 3 characters.
+ # Consider how the elevator buttons would be labeled for this level if there
+ # was an elevator.
+ "number": 3.14, # Floor number, used for ordering. 0 indicates the ground level, 1 indicates
+ # the first level above ground level, -1 indicates the first level under
+ # ground level. Non-integer values are OK.
+ },
+ "roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0
+ # means level with the horizon.
+ # NaN indicates an unmeasured quantity.
+ "altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid.
+ # NaN indicates an unmeasured quantity.
+ "accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68%
+ # confidence (one standard deviation). For example, on Android, this value is
+ # available from this method:
+ # https://developer.android.com/reference/android/location/Location#getAccuracy().
+ # Other platforms have different methods of obtaining similar accuracy
+ # estimations.
+ "pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90
+ # and <= 90. A value of -90 means looking directly down, and a value of 90
+ # means looking directly up.
+ # NaN indicates an unmeasured quantity.
+ "latLngPair": { # An object representing a latitude/longitude pair. This is expressed as a pair # Latitude and longitude pair of the pose, as explained here:
+ # https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng
+ # When creating a Photo, if the
+ # latitude and longitude pair are not provided, the geolocation from the
+ # exif header is used. A latitude and longitude pair not provided in the
+ # photo or exif header causes the photo process to fail.
+ # of doubles representing degrees latitude and degrees longitude. Unless
+ # specified otherwise, this must conform to the
+ # <a href="http://www.unoosa.org/pdf/icg/2012/template/WGS_84.pdf">WGS84
+ # standard</a>. Values must be within normalized ranges.
+ "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+ "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+ },
+ },
+ "connections": [ # Connections to other photos. A connection represents the link from this
+ # photo to another photo.
+ { # A connection is the link from a source photo to a destination photo.
+ "target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to
+ # another photo.
+ "id": "A String", # Required. A unique identifier for a photo.
+ },
+ },
+ ],
+ "thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
+ "uploadReference": { # Upload reference for media files. # Required when creating a photo. Input only. The resource URL where the
+ # photo bytes are uploaded to.
+ "uploadUrl": "A String", # Required. An upload reference should be unique for each user. It follows
+ # the form:
+ # "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
+ },
+ "transferStatus": "A String", # Output only. Status of rights transfer on this photo.
+ "viewCount": "A String", # Output only. View count of the photo.
+ "mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or
+ # rejected. Not currently populated.
+}
+
+ x__xgafv: string, V1 error format.
+ Allowed values
+ 1 - v1 error format
+ 2 - v2 error format
+
+Returns:
+ An object of the form:
+
+ { # Photo is used to store 360 photos along with photo metadata.
+ "photoId": { # Identifier for a Photo. # Required when updating a photo. Output only when creating a photo.
+ # Identifier for the photo, which is unique among all photos in
+ # Google.
+ "id": "A String", # Required. A unique identifier for a photo.
+ },
+ "places": [ # Places where this photo belongs.
+ { # Place metadata for an entity.
+ "name": "A String", # Output-only. The name of the place, localized to the language_code.
+ "languageCode": "A String", # Output-only. The language_code that the name is localized with. This should
+ # be the language_code specified in the request, but may be a fallback.
+ "placeId": "A String", # Place identifier, as described in
+ # https://developers.google.com/places/place-id.
+ },
+ ],
+ "downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only
+ # when
+ # GetPhotoRequest.view
+ # is set to
+ # PhotoView.INCLUDE_DOWNLOAD_URL.
"captureTime": "A String", # Absolute time when the photo was captured.
# When the photo has no exif timestamp, this is used to set a timestamp in
# the photo metadata.
+ "shareLink": "A String", # Output only. The share link for the photo.
+ "pose": { # Raw pose measurement for an entity. # Pose of the photo.
+ "heading": 3.14, # Compass heading, measured at the center of the photo in degrees clockwise
+ # from North. Value must be >=0 and <360.
+ # NaN indicates an unmeasured quantity.
+ "level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
+ "name": "A String", # Required. A name assigned to this Level, restricted to 3 characters.
+ # Consider how the elevator buttons would be labeled for this level if there
+ # was an elevator.
+ "number": 3.14, # Floor number, used for ordering. 0 indicates the ground level, 1 indicates
+ # the first level above ground level, -1 indicates the first level under
+ # ground level. Non-integer values are OK.
+ },
+ "roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0
+ # means level with the horizon.
+ # NaN indicates an unmeasured quantity.
+ "altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid.
+ # NaN indicates an unmeasured quantity.
+ "accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68%
+ # confidence (one standard deviation). For example, on Android, this value is
+ # available from this method:
+ # https://developer.android.com/reference/android/location/Location#getAccuracy().
+ # Other platforms have different methods of obtaining similar accuracy
+ # estimations.
+ "pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90
+ # and <= 90. A value of -90 means looking directly down, and a value of 90
+ # means looking directly up.
+ # NaN indicates an unmeasured quantity.
+ "latLngPair": { # An object representing a latitude/longitude pair. This is expressed as a pair # Latitude and longitude pair of the pose, as explained here:
+ # https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng
+ # When creating a Photo, if the
+ # latitude and longitude pair are not provided, the geolocation from the
+ # exif header is used. A latitude and longitude pair not provided in the
+ # photo or exif header causes the photo process to fail.
+ # of doubles representing degrees latitude and degrees longitude. Unless
+ # specified otherwise, this must conform to the
+ # <a href="http://www.unoosa.org/pdf/icg/2012/template/WGS_84.pdf">WGS84
+ # standard</a>. Values must be within normalized ranges.
+ "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+ "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
+ },
+ },
"connections": [ # Connections to other photos. A connection represents the link from this
# photo to another photo.
{ # A connection is the link from a source photo to a destination photo.
@@ -136,167 +292,11 @@
# the form:
# "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
},
- "shareLink": "A String", # Output only. The share link for the photo.
- "pose": { # Raw pose measurement for an entity. # Pose of the photo.
- "accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68%
- # confidence (one standard deviation). For example, on Android, this value is
- # available from this method:
- # https://developer.android.com/reference/android/location/Location#getAccuracy().
- # Other platforms have different methods of obtaining similar accuracy
- # estimations.
- "altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid.
- # NaN indicates an unmeasured quantity.
- "heading": 3.14, # Compass heading, measured at the center of the photo in degrees clockwise
- # from North. Value must be >=0 and <360.
- # NaN indicates an unmeasured quantity.
- "level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
- "name": "A String", # Required. A name assigned to this Level, restricted to 3 characters.
- # Consider how the elevator buttons would be labeled for this level if there
- # was an elevator.
- "number": 3.14, # Floor number, used for ordering. 0 indicates the ground level, 1 indicates
- # the first level above ground level, -1 indicates the first level under
- # ground level. Non-integer values are OK.
- },
- "latLngPair": { # An object representing a latitude/longitude pair. This is expressed as a pair # Latitude and longitude pair of the pose, as explained here:
- # https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng
- # When creating a Photo, if the
- # latitude and longitude pair are not provided, the geolocation from the
- # exif header is used. A latitude and longitude pair not provided in the
- # photo or exif header causes the photo process to fail.
- # of doubles representing degrees latitude and degrees longitude. Unless
- # specified otherwise, this must conform to the
- # <a href="http://www.unoosa.org/pdf/icg/2012/template/WGS_84.pdf">WGS84
- # standard</a>. Values must be within normalized ranges.
- "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
- "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
- },
- "pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90
- # and <= 90. A value of -90 means looking directly down, and a value of 90
- # means looking directly up.
- # NaN indicates an unmeasured quantity.
- "roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0
- # means level with the horizon.
- # NaN indicates an unmeasured quantity.
- },
- "places": [ # Places where this photo belongs.
- { # Place metadata for an entity.
- "name": "A String", # Output-only. The name of the place, localized to the language_code.
- "languageCode": "A String", # Output-only. The language_code that the name is localized with. This should
- # be the language_code specified in the request, but may be a fallback.
- "placeId": "A String", # Place identifier, as described in
- # https://developers.google.com/places/place-id.
- },
- ],
- "downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only
- # when
- # GetPhotoRequest.view
- # is set to
- # PhotoView.INCLUDE_DOWNLOAD_URL.
"transferStatus": "A String", # Output only. Status of rights transfer on this photo.
- "photoId": { # Identifier for a Photo. # Required when updating a photo. Output only when creating a photo.
- # Identifier for the photo, which is unique among all photos in
- # Google.
- "id": "A String", # Required. A unique identifier for a photo.
- },
+ "viewCount": "A String", # Output only. View count of the photo.
"mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or
# rejected. Not currently populated.
- "viewCount": "A String", # Output only. View count of the photo.
- }
-
- x__xgafv: string, V1 error format.
- Allowed values
- 1 - v1 error format
- 2 - v2 error format
-
-Returns:
- An object of the form:
-
- { # Photo is used to store 360 photos along with photo metadata.
- "captureTime": "A String", # Absolute time when the photo was captured.
- # When the photo has no exif timestamp, this is used to set a timestamp in
- # the photo metadata.
- "connections": [ # Connections to other photos. A connection represents the link from this
- # photo to another photo.
- { # A connection is the link from a source photo to a destination photo.
- "target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to
- # another photo.
- "id": "A String", # Required. A unique identifier for a photo.
- },
- },
- ],
- "thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
- "uploadReference": { # Upload reference for media files. # Required when creating a photo. Input only. The resource URL where the
- # photo bytes are uploaded to.
- "uploadUrl": "A String", # Required. An upload reference should be unique for each user. It follows
- # the form:
- # "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
- },
- "shareLink": "A String", # Output only. The share link for the photo.
- "pose": { # Raw pose measurement for an entity. # Pose of the photo.
- "accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68%
- # confidence (one standard deviation). For example, on Android, this value is
- # available from this method:
- # https://developer.android.com/reference/android/location/Location#getAccuracy().
- # Other platforms have different methods of obtaining similar accuracy
- # estimations.
- "altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid.
- # NaN indicates an unmeasured quantity.
- "heading": 3.14, # Compass heading, measured at the center of the photo in degrees clockwise
- # from North. Value must be >=0 and <360.
- # NaN indicates an unmeasured quantity.
- "level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
- "name": "A String", # Required. A name assigned to this Level, restricted to 3 characters.
- # Consider how the elevator buttons would be labeled for this level if there
- # was an elevator.
- "number": 3.14, # Floor number, used for ordering. 0 indicates the ground level, 1 indicates
- # the first level above ground level, -1 indicates the first level under
- # ground level. Non-integer values are OK.
- },
- "latLngPair": { # An object representing a latitude/longitude pair. This is expressed as a pair # Latitude and longitude pair of the pose, as explained here:
- # https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng
- # When creating a Photo, if the
- # latitude and longitude pair are not provided, the geolocation from the
- # exif header is used. A latitude and longitude pair not provided in the
- # photo or exif header causes the photo process to fail.
- # of doubles representing degrees latitude and degrees longitude. Unless
- # specified otherwise, this must conform to the
- # <a href="http://www.unoosa.org/pdf/icg/2012/template/WGS_84.pdf">WGS84
- # standard</a>. Values must be within normalized ranges.
- "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
- "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
- },
- "pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90
- # and <= 90. A value of -90 means looking directly down, and a value of 90
- # means looking directly up.
- # NaN indicates an unmeasured quantity.
- "roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0
- # means level with the horizon.
- # NaN indicates an unmeasured quantity.
- },
- "places": [ # Places where this photo belongs.
- { # Place metadata for an entity.
- "name": "A String", # Output-only. The name of the place, localized to the language_code.
- "languageCode": "A String", # Output-only. The language_code that the name is localized with. This should
- # be the language_code specified in the request, but may be a fallback.
- "placeId": "A String", # Place identifier, as described in
- # https://developers.google.com/places/place-id.
- },
- ],
- "downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only
- # when
- # GetPhotoRequest.view
- # is set to
- # PhotoView.INCLUDE_DOWNLOAD_URL.
- "transferStatus": "A String", # Output only. Status of rights transfer on this photo.
- "photoId": { # Identifier for a Photo. # Required when updating a photo. Output only when creating a photo.
- # Identifier for the photo, which is unique among all photos in
- # Google.
- "id": "A String", # Required. A unique identifier for a photo.
- },
- "mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or
- # rejected. Not currently populated.
- "viewCount": "A String", # Output only. View count of the photo.
- }</pre>
+ }</pre>
</div>
<div class="method">
@@ -332,7 +332,7 @@
</div>
<div class="method">
- <code class="details" id="get">get(photoId, languageCode=None, view=None, x__xgafv=None)</code>
+ <code class="details" id="get">get(photoId, view=None, languageCode=None, x__xgafv=None)</code>
<pre>Gets the metadata of the specified
Photo.
@@ -347,13 +347,13 @@
Args:
photoId: string, Required. ID of the Photo. (required)
+ view: string, Required. Specifies if a download URL for the photo bytes should be returned in the
+Photo response.
languageCode: string, The BCP-47 language code, such as "en-US" or "sr-Latn". For more
information, see
http://www.unicode.org/reports/tr35/#Unicode_locale_identifier.
If language_code is unspecified, the user's language preference for Google
services is used.
- view: string, Required. Specifies if a download URL for the photo bytes should be returned in the
-Photo response.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
@@ -363,91 +363,91 @@
An object of the form:
{ # Photo is used to store 360 photos along with photo metadata.
- "captureTime": "A String", # Absolute time when the photo was captured.
- # When the photo has no exif timestamp, this is used to set a timestamp in
- # the photo metadata.
- "connections": [ # Connections to other photos. A connection represents the link from this
- # photo to another photo.
- { # A connection is the link from a source photo to a destination photo.
- "target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to
- # another photo.
- "id": "A String", # Required. A unique identifier for a photo.
- },
- },
- ],
- "thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
- "uploadReference": { # Upload reference for media files. # Required when creating a photo. Input only. The resource URL where the
- # photo bytes are uploaded to.
- "uploadUrl": "A String", # Required. An upload reference should be unique for each user. It follows
- # the form:
- # "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
+ "photoId": { # Identifier for a Photo. # Required when updating a photo. Output only when creating a photo.
+ # Identifier for the photo, which is unique among all photos in
+ # Google.
+ "id": "A String", # Required. A unique identifier for a photo.
+ },
+ "places": [ # Places where this photo belongs.
+ { # Place metadata for an entity.
+ "name": "A String", # Output-only. The name of the place, localized to the language_code.
+ "languageCode": "A String", # Output-only. The language_code that the name is localized with. This should
+ # be the language_code specified in the request, but may be a fallback.
+ "placeId": "A String", # Place identifier, as described in
+ # https://developers.google.com/places/place-id.
},
- "shareLink": "A String", # Output only. The share link for the photo.
- "pose": { # Raw pose measurement for an entity. # Pose of the photo.
- "accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68%
- # confidence (one standard deviation). For example, on Android, this value is
- # available from this method:
- # https://developer.android.com/reference/android/location/Location#getAccuracy().
- # Other platforms have different methods of obtaining similar accuracy
- # estimations.
- "altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid.
- # NaN indicates an unmeasured quantity.
- "heading": 3.14, # Compass heading, measured at the center of the photo in degrees clockwise
- # from North. Value must be >=0 and <360.
- # NaN indicates an unmeasured quantity.
- "level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
- "name": "A String", # Required. A name assigned to this Level, restricted to 3 characters.
- # Consider how the elevator buttons would be labeled for this level if there
- # was an elevator.
- "number": 3.14, # Floor number, used for ordering. 0 indicates the ground level, 1 indicates
- # the first level above ground level, -1 indicates the first level under
- # ground level. Non-integer values are OK.
- },
- "latLngPair": { # An object representing a latitude/longitude pair. This is expressed as a pair # Latitude and longitude pair of the pose, as explained here:
- # https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng
- # When creating a Photo, if the
- # latitude and longitude pair are not provided, the geolocation from the
- # exif header is used. A latitude and longitude pair not provided in the
- # photo or exif header causes the photo process to fail.
- # of doubles representing degrees latitude and degrees longitude. Unless
- # specified otherwise, this must conform to the
- # <a href="http://www.unoosa.org/pdf/icg/2012/template/WGS_84.pdf">WGS84
- # standard</a>. Values must be within normalized ranges.
- "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
- "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
- },
- "pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90
- # and <= 90. A value of -90 means looking directly down, and a value of 90
- # means looking directly up.
- # NaN indicates an unmeasured quantity.
- "roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0
- # means level with the horizon.
- # NaN indicates an unmeasured quantity.
+ ],
+ "downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only
+ # when
+ # GetPhotoRequest.view
+ # is set to
+ # PhotoView.INCLUDE_DOWNLOAD_URL.
+ "captureTime": "A String", # Absolute time when the photo was captured.
+ # When the photo has no exif timestamp, this is used to set a timestamp in
+ # the photo metadata.
+ "shareLink": "A String", # Output only. The share link for the photo.
+ "pose": { # Raw pose measurement for an entity. # Pose of the photo.
+ "heading": 3.14, # Compass heading, measured at the center of the photo in degrees clockwise
+ # from North. Value must be >=0 and <360.
+ # NaN indicates an unmeasured quantity.
+ "level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
+ "name": "A String", # Required. A name assigned to this Level, restricted to 3 characters.
+ # Consider how the elevator buttons would be labeled for this level if there
+ # was an elevator.
+ "number": 3.14, # Floor number, used for ordering. 0 indicates the ground level, 1 indicates
+ # the first level above ground level, -1 indicates the first level under
+ # ground level. Non-integer values are OK.
},
- "places": [ # Places where this photo belongs.
- { # Place metadata for an entity.
- "name": "A String", # Output-only. The name of the place, localized to the language_code.
- "languageCode": "A String", # Output-only. The language_code that the name is localized with. This should
- # be the language_code specified in the request, but may be a fallback.
- "placeId": "A String", # Place identifier, as described in
- # https://developers.google.com/places/place-id.
- },
- ],
- "downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only
- # when
- # GetPhotoRequest.view
- # is set to
- # PhotoView.INCLUDE_DOWNLOAD_URL.
- "transferStatus": "A String", # Output only. Status of rights transfer on this photo.
- "photoId": { # Identifier for a Photo. # Required when updating a photo. Output only when creating a photo.
- # Identifier for the photo, which is unique among all photos in
- # Google.
- "id": "A String", # Required. A unique identifier for a photo.
+ "roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0
+ # means level with the horizon.
+ # NaN indicates an unmeasured quantity.
+ "altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid.
+ # NaN indicates an unmeasured quantity.
+ "accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68%
+ # confidence (one standard deviation). For example, on Android, this value is
+ # available from this method:
+ # https://developer.android.com/reference/android/location/Location#getAccuracy().
+ # Other platforms have different methods of obtaining similar accuracy
+ # estimations.
+ "pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90
+ # and <= 90. A value of -90 means looking directly down, and a value of 90
+ # means looking directly up.
+ # NaN indicates an unmeasured quantity.
+ "latLngPair": { # An object representing a latitude/longitude pair. This is expressed as a pair # Latitude and longitude pair of the pose, as explained here:
+ # https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng
+ # When creating a Photo, if the
+ # latitude and longitude pair are not provided, the geolocation from the
+ # exif header is used. A latitude and longitude pair not provided in the
+ # photo or exif header causes the photo process to fail.
+ # of doubles representing degrees latitude and degrees longitude. Unless
+ # specified otherwise, this must conform to the
+ # <a href="http://www.unoosa.org/pdf/icg/2012/template/WGS_84.pdf">WGS84
+ # standard</a>. Values must be within normalized ranges.
+ "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+ "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
},
- "mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or
- # rejected. Not currently populated.
- "viewCount": "A String", # Output only. View count of the photo.
- }</pre>
+ },
+ "connections": [ # Connections to other photos. A connection represents the link from this
+ # photo to another photo.
+ { # A connection is the link from a source photo to a destination photo.
+ "target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to
+ # another photo.
+ "id": "A String", # Required. A unique identifier for a photo.
+ },
+ },
+ ],
+ "thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
+ "uploadReference": { # Upload reference for media files. # Required when creating a photo. Input only. The resource URL where the
+ # photo bytes are uploaded to.
+ "uploadUrl": "A String", # Required. An upload reference should be unique for each user. It follows
+ # the form:
+ # "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
+ },
+ "transferStatus": "A String", # Output only. Status of rights transfer on this photo.
+ "viewCount": "A String", # Output only. View count of the photo.
+ "mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or
+ # rejected. Not currently populated.
+ }</pre>
</div>
<div class="method">
@@ -529,91 +529,91 @@
The object takes the form of:
{ # Photo is used to store 360 photos along with photo metadata.
- "captureTime": "A String", # Absolute time when the photo was captured.
- # When the photo has no exif timestamp, this is used to set a timestamp in
- # the photo metadata.
- "connections": [ # Connections to other photos. A connection represents the link from this
- # photo to another photo.
- { # A connection is the link from a source photo to a destination photo.
- "target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to
- # another photo.
- "id": "A String", # Required. A unique identifier for a photo.
- },
- },
- ],
- "thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
- "uploadReference": { # Upload reference for media files. # Required when creating a photo. Input only. The resource URL where the
- # photo bytes are uploaded to.
- "uploadUrl": "A String", # Required. An upload reference should be unique for each user. It follows
- # the form:
- # "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
+ "photoId": { # Identifier for a Photo. # Required when updating a photo. Output only when creating a photo.
+ # Identifier for the photo, which is unique among all photos in
+ # Google.
+ "id": "A String", # Required. A unique identifier for a photo.
+ },
+ "places": [ # Places where this photo belongs.
+ { # Place metadata for an entity.
+ "name": "A String", # Output-only. The name of the place, localized to the language_code.
+ "languageCode": "A String", # Output-only. The language_code that the name is localized with. This should
+ # be the language_code specified in the request, but may be a fallback.
+ "placeId": "A String", # Place identifier, as described in
+ # https://developers.google.com/places/place-id.
},
- "shareLink": "A String", # Output only. The share link for the photo.
- "pose": { # Raw pose measurement for an entity. # Pose of the photo.
- "accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68%
- # confidence (one standard deviation). For example, on Android, this value is
- # available from this method:
- # https://developer.android.com/reference/android/location/Location#getAccuracy().
- # Other platforms have different methods of obtaining similar accuracy
- # estimations.
- "altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid.
- # NaN indicates an unmeasured quantity.
- "heading": 3.14, # Compass heading, measured at the center of the photo in degrees clockwise
- # from North. Value must be >=0 and <360.
- # NaN indicates an unmeasured quantity.
- "level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
- "name": "A String", # Required. A name assigned to this Level, restricted to 3 characters.
- # Consider how the elevator buttons would be labeled for this level if there
- # was an elevator.
- "number": 3.14, # Floor number, used for ordering. 0 indicates the ground level, 1 indicates
- # the first level above ground level, -1 indicates the first level under
- # ground level. Non-integer values are OK.
- },
- "latLngPair": { # An object representing a latitude/longitude pair. This is expressed as a pair # Latitude and longitude pair of the pose, as explained here:
- # https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng
- # When creating a Photo, if the
- # latitude and longitude pair are not provided, the geolocation from the
- # exif header is used. A latitude and longitude pair not provided in the
- # photo or exif header causes the photo process to fail.
- # of doubles representing degrees latitude and degrees longitude. Unless
- # specified otherwise, this must conform to the
- # <a href="http://www.unoosa.org/pdf/icg/2012/template/WGS_84.pdf">WGS84
- # standard</a>. Values must be within normalized ranges.
- "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
- "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
- },
- "pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90
- # and <= 90. A value of -90 means looking directly down, and a value of 90
- # means looking directly up.
- # NaN indicates an unmeasured quantity.
- "roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0
- # means level with the horizon.
- # NaN indicates an unmeasured quantity.
+ ],
+ "downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only
+ # when
+ # GetPhotoRequest.view
+ # is set to
+ # PhotoView.INCLUDE_DOWNLOAD_URL.
+ "captureTime": "A String", # Absolute time when the photo was captured.
+ # When the photo has no exif timestamp, this is used to set a timestamp in
+ # the photo metadata.
+ "shareLink": "A String", # Output only. The share link for the photo.
+ "pose": { # Raw pose measurement for an entity. # Pose of the photo.
+ "heading": 3.14, # Compass heading, measured at the center of the photo in degrees clockwise
+ # from North. Value must be >=0 and <360.
+ # NaN indicates an unmeasured quantity.
+ "level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
+ "name": "A String", # Required. A name assigned to this Level, restricted to 3 characters.
+ # Consider how the elevator buttons would be labeled for this level if there
+ # was an elevator.
+ "number": 3.14, # Floor number, used for ordering. 0 indicates the ground level, 1 indicates
+ # the first level above ground level, -1 indicates the first level under
+ # ground level. Non-integer values are OK.
},
- "places": [ # Places where this photo belongs.
- { # Place metadata for an entity.
- "name": "A String", # Output-only. The name of the place, localized to the language_code.
- "languageCode": "A String", # Output-only. The language_code that the name is localized with. This should
- # be the language_code specified in the request, but may be a fallback.
- "placeId": "A String", # Place identifier, as described in
- # https://developers.google.com/places/place-id.
- },
- ],
- "downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only
- # when
- # GetPhotoRequest.view
- # is set to
- # PhotoView.INCLUDE_DOWNLOAD_URL.
- "transferStatus": "A String", # Output only. Status of rights transfer on this photo.
- "photoId": { # Identifier for a Photo. # Required when updating a photo. Output only when creating a photo.
- # Identifier for the photo, which is unique among all photos in
- # Google.
- "id": "A String", # Required. A unique identifier for a photo.
+ "roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0
+ # means level with the horizon.
+ # NaN indicates an unmeasured quantity.
+ "altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid.
+ # NaN indicates an unmeasured quantity.
+ "accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68%
+ # confidence (one standard deviation). For example, on Android, this value is
+ # available from this method:
+ # https://developer.android.com/reference/android/location/Location#getAccuracy().
+ # Other platforms have different methods of obtaining similar accuracy
+ # estimations.
+ "pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90
+ # and <= 90. A value of -90 means looking directly down, and a value of 90
+ # means looking directly up.
+ # NaN indicates an unmeasured quantity.
+ "latLngPair": { # An object representing a latitude/longitude pair. This is expressed as a pair # Latitude and longitude pair of the pose, as explained here:
+ # https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng
+ # When creating a Photo, if the
+ # latitude and longitude pair are not provided, the geolocation from the
+ # exif header is used. A latitude and longitude pair not provided in the
+ # photo or exif header causes the photo process to fail.
+ # of doubles representing degrees latitude and degrees longitude. Unless
+ # specified otherwise, this must conform to the
+ # <a href="http://www.unoosa.org/pdf/icg/2012/template/WGS_84.pdf">WGS84
+ # standard</a>. Values must be within normalized ranges.
+ "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+ "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
},
- "mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or
- # rejected. Not currently populated.
- "viewCount": "A String", # Output only. View count of the photo.
- }
+ },
+ "connections": [ # Connections to other photos. A connection represents the link from this
+ # photo to another photo.
+ { # A connection is the link from a source photo to a destination photo.
+ "target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to
+ # another photo.
+ "id": "A String", # Required. A unique identifier for a photo.
+ },
+ },
+ ],
+ "thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
+ "uploadReference": { # Upload reference for media files. # Required when creating a photo. Input only. The resource URL where the
+ # photo bytes are uploaded to.
+ "uploadUrl": "A String", # Required. An upload reference should be unique for each user. It follows
+ # the form:
+ # "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
+ },
+ "transferStatus": "A String", # Output only. Status of rights transfer on this photo.
+ "viewCount": "A String", # Output only. View count of the photo.
+ "mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or
+ # rejected. Not currently populated.
+}
updateMask: string, Required. Mask that identifies fields on the photo metadata to update.
If not present, the old Photo
@@ -650,91 +650,91 @@
An object of the form:
{ # Photo is used to store 360 photos along with photo metadata.
- "captureTime": "A String", # Absolute time when the photo was captured.
- # When the photo has no exif timestamp, this is used to set a timestamp in
- # the photo metadata.
- "connections": [ # Connections to other photos. A connection represents the link from this
- # photo to another photo.
- { # A connection is the link from a source photo to a destination photo.
- "target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to
- # another photo.
- "id": "A String", # Required. A unique identifier for a photo.
- },
- },
- ],
- "thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
- "uploadReference": { # Upload reference for media files. # Required when creating a photo. Input only. The resource URL where the
- # photo bytes are uploaded to.
- "uploadUrl": "A String", # Required. An upload reference should be unique for each user. It follows
- # the form:
- # "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
+ "photoId": { # Identifier for a Photo. # Required when updating a photo. Output only when creating a photo.
+ # Identifier for the photo, which is unique among all photos in
+ # Google.
+ "id": "A String", # Required. A unique identifier for a photo.
+ },
+ "places": [ # Places where this photo belongs.
+ { # Place metadata for an entity.
+ "name": "A String", # Output-only. The name of the place, localized to the language_code.
+ "languageCode": "A String", # Output-only. The language_code that the name is localized with. This should
+ # be the language_code specified in the request, but may be a fallback.
+ "placeId": "A String", # Place identifier, as described in
+ # https://developers.google.com/places/place-id.
},
- "shareLink": "A String", # Output only. The share link for the photo.
- "pose": { # Raw pose measurement for an entity. # Pose of the photo.
- "accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68%
- # confidence (one standard deviation). For example, on Android, this value is
- # available from this method:
- # https://developer.android.com/reference/android/location/Location#getAccuracy().
- # Other platforms have different methods of obtaining similar accuracy
- # estimations.
- "altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid.
- # NaN indicates an unmeasured quantity.
- "heading": 3.14, # Compass heading, measured at the center of the photo in degrees clockwise
- # from North. Value must be >=0 and <360.
- # NaN indicates an unmeasured quantity.
- "level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
- "name": "A String", # Required. A name assigned to this Level, restricted to 3 characters.
- # Consider how the elevator buttons would be labeled for this level if there
- # was an elevator.
- "number": 3.14, # Floor number, used for ordering. 0 indicates the ground level, 1 indicates
- # the first level above ground level, -1 indicates the first level under
- # ground level. Non-integer values are OK.
- },
- "latLngPair": { # An object representing a latitude/longitude pair. This is expressed as a pair # Latitude and longitude pair of the pose, as explained here:
- # https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng
- # When creating a Photo, if the
- # latitude and longitude pair are not provided, the geolocation from the
- # exif header is used. A latitude and longitude pair not provided in the
- # photo or exif header causes the photo process to fail.
- # of doubles representing degrees latitude and degrees longitude. Unless
- # specified otherwise, this must conform to the
- # <a href="http://www.unoosa.org/pdf/icg/2012/template/WGS_84.pdf">WGS84
- # standard</a>. Values must be within normalized ranges.
- "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
- "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
- },
- "pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90
- # and <= 90. A value of -90 means looking directly down, and a value of 90
- # means looking directly up.
- # NaN indicates an unmeasured quantity.
- "roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0
- # means level with the horizon.
- # NaN indicates an unmeasured quantity.
+ ],
+ "downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only
+ # when
+ # GetPhotoRequest.view
+ # is set to
+ # PhotoView.INCLUDE_DOWNLOAD_URL.
+ "captureTime": "A String", # Absolute time when the photo was captured.
+ # When the photo has no exif timestamp, this is used to set a timestamp in
+ # the photo metadata.
+ "shareLink": "A String", # Output only. The share link for the photo.
+ "pose": { # Raw pose measurement for an entity. # Pose of the photo.
+ "heading": 3.14, # Compass heading, measured at the center of the photo in degrees clockwise
+ # from North. Value must be >=0 and <360.
+ # NaN indicates an unmeasured quantity.
+ "level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
+ "name": "A String", # Required. A name assigned to this Level, restricted to 3 characters.
+ # Consider how the elevator buttons would be labeled for this level if there
+ # was an elevator.
+ "number": 3.14, # Floor number, used for ordering. 0 indicates the ground level, 1 indicates
+ # the first level above ground level, -1 indicates the first level under
+ # ground level. Non-integer values are OK.
},
- "places": [ # Places where this photo belongs.
- { # Place metadata for an entity.
- "name": "A String", # Output-only. The name of the place, localized to the language_code.
- "languageCode": "A String", # Output-only. The language_code that the name is localized with. This should
- # be the language_code specified in the request, but may be a fallback.
- "placeId": "A String", # Place identifier, as described in
- # https://developers.google.com/places/place-id.
- },
- ],
- "downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only
- # when
- # GetPhotoRequest.view
- # is set to
- # PhotoView.INCLUDE_DOWNLOAD_URL.
- "transferStatus": "A String", # Output only. Status of rights transfer on this photo.
- "photoId": { # Identifier for a Photo. # Required when updating a photo. Output only when creating a photo.
- # Identifier for the photo, which is unique among all photos in
- # Google.
- "id": "A String", # Required. A unique identifier for a photo.
+ "roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0
+ # means level with the horizon.
+ # NaN indicates an unmeasured quantity.
+ "altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid.
+ # NaN indicates an unmeasured quantity.
+ "accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68%
+ # confidence (one standard deviation). For example, on Android, this value is
+ # available from this method:
+ # https://developer.android.com/reference/android/location/Location#getAccuracy().
+ # Other platforms have different methods of obtaining similar accuracy
+ # estimations.
+ "pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90
+ # and <= 90. A value of -90 means looking directly down, and a value of 90
+ # means looking directly up.
+ # NaN indicates an unmeasured quantity.
+ "latLngPair": { # An object representing a latitude/longitude pair. This is expressed as a pair # Latitude and longitude pair of the pose, as explained here:
+ # https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng
+ # When creating a Photo, if the
+ # latitude and longitude pair are not provided, the geolocation from the
+ # exif header is used. A latitude and longitude pair not provided in the
+ # photo or exif header causes the photo process to fail.
+ # of doubles representing degrees latitude and degrees longitude. Unless
+ # specified otherwise, this must conform to the
+ # <a href="http://www.unoosa.org/pdf/icg/2012/template/WGS_84.pdf">WGS84
+ # standard</a>. Values must be within normalized ranges.
+ "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
+ "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
},
- "mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or
- # rejected. Not currently populated.
- "viewCount": "A String", # Output only. View count of the photo.
- }</pre>
+ },
+ "connections": [ # Connections to other photos. A connection represents the link from this
+ # photo to another photo.
+ { # A connection is the link from a source photo to a destination photo.
+ "target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to
+ # another photo.
+ "id": "A String", # Required. A unique identifier for a photo.
+ },
+ },
+ ],
+ "thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
+ "uploadReference": { # Upload reference for media files. # Required when creating a photo. Input only. The resource URL where the
+ # photo bytes are uploaded to.
+ "uploadUrl": "A String", # Required. An upload reference should be unique for each user. It follows
+ # the form:
+ # "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
+ },
+ "transferStatus": "A String", # Output only. Status of rights transfer on this photo.
+ "viewCount": "A String", # Output only. View count of the photo.
+ "mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or
+ # rejected. Not currently populated.
+ }</pre>
</div>
</body></html>
\ No newline at end of file