chore: regens API reference docs (#889)
diff --git a/docs/dyn/compute_v1.instanceGroupManagers.html b/docs/dyn/compute_v1.instanceGroupManagers.html
index 7ab6b8e..cc196b4 100644
--- a/docs/dyn/compute_v1.instanceGroupManagers.html
+++ b/docs/dyn/compute_v1.instanceGroupManagers.html
@@ -75,53 +75,68 @@
<h1><a href="compute_v1.html">Compute Engine API</a> . <a href="compute_v1.instanceGroupManagers.html">instanceGroupManagers</a></h1>
<h2>Instance Methods</h2>
<p class="toc_element">
- <code><a href="#abandonInstances">abandonInstances(project, zone, instanceGroupManager, body, requestId=None)</a></code></p>
+ <code><a href="#abandonInstances">abandonInstances(project, zone, instanceGroupManager, body=None, requestId=None)</a></code></p>
<p class="firstline">Flags the specified instances to be removed from the managed instance group. Abandoning an instance does not delete the instance, but it does remove the instance from any target pools that are applied by the managed instance group. This method reduces the targetSize of the managed instance group by the number of instances that you abandon. This operation is marked as DONE when the action is scheduled even if the instances have not yet been removed from the group. You must separately verify the status of the abandoning action with the listmanagedinstances method.</p>
<p class="toc_element">
- <code><a href="#aggregatedList">aggregatedList(project, orderBy=None, maxResults=None, pageToken=None, filter=None)</a></code></p>
+ <code><a href="#aggregatedList">aggregatedList(project, orderBy=None, maxResults=None, pageToken=None, filter=None, includeAllScopes=None)</a></code></p>
<p class="firstline">Retrieves the list of managed instance groups and groups them by zone.</p>
<p class="toc_element">
<code><a href="#aggregatedList_next">aggregatedList_next(previous_request, previous_response)</a></code></p>
<p class="firstline">Retrieves the next page of results.</p>
<p class="toc_element">
+ <code><a href="#applyUpdatesToInstances">applyUpdatesToInstances(project, zone, instanceGroupManager, body=None)</a></code></p>
+<p class="firstline">Applies changes to selected instances on the managed instance group. This method can be used to apply new overrides and/or new versions.</p>
+<p class="toc_element">
+ <code><a href="#createInstances">createInstances(project, zone, instanceGroupManager, body=None, requestId=None)</a></code></p>
+<p class="firstline">Creates instances with per-instance configs in this managed instance group. Instances are created using the current instance template. The create instances operation is marked DONE if the createInstances request is successful. The underlying actions take additional time. You must separately verify the status of the creating or actions with the listmanagedinstances method.</p>
+<p class="toc_element">
<code><a href="#delete">delete(project, zone, instanceGroupManager, requestId=None)</a></code></p>
<p class="firstline">Deletes the specified managed instance group and all of the instances in that group. Note that the instance group must not belong to a backend service. Read Deleting an instance group for more information.</p>
<p class="toc_element">
- <code><a href="#deleteInstances">deleteInstances(project, zone, instanceGroupManager, body, requestId=None)</a></code></p>
+ <code><a href="#deleteInstances">deleteInstances(project, zone, instanceGroupManager, body=None, requestId=None)</a></code></p>
<p class="firstline">Flags the specified instances in the managed instance group for immediate deletion. The instances are also removed from any target pools of which they were a member. This method reduces the targetSize of the managed instance group by the number of instances that you delete. This operation is marked as DONE when the action is scheduled even if the instances are still being deleted. You must separately verify the status of the deleting action with the listmanagedinstances method.</p>
<p class="toc_element">
<code><a href="#get">get(project, zone, instanceGroupManager)</a></code></p>
<p class="firstline">Returns all of the details about the specified managed instance group. Gets a list of available managed instance groups by making a list() request.</p>
<p class="toc_element">
- <code><a href="#insert">insert(project, zone, body, requestId=None)</a></code></p>
+ <code><a href="#insert">insert(project, zone, body=None, requestId=None)</a></code></p>
<p class="firstline">Creates a managed instance group using the information that you specify in the request. After the group is created, instances in the group are created using the specified instance template. This operation is marked as DONE when the group is created even if the instances in the group have not yet been created. You must separately verify the status of the individual instances with the listmanagedinstances method.</p>
<p class="toc_element">
<code><a href="#list">list(project, zone, orderBy=None, maxResults=None, pageToken=None, filter=None)</a></code></p>
<p class="firstline">Retrieves a list of managed instance groups that are contained within the specified project and zone.</p>
<p class="toc_element">
- <code><a href="#listManagedInstances">listManagedInstances(project, zone, instanceGroupManager, order_by=None, maxResults=None, pageToken=None, filter=None)</a></code></p>
+ <code><a href="#listErrors">listErrors(project, zone, instanceGroupManager, orderBy=None, maxResults=None, pageToken=None, filter=None)</a></code></p>
+<p class="firstline">Lists all errors thrown by actions on instances for a given managed instance group.</p>
+<p class="toc_element">
+ <code><a href="#listErrors_next">listErrors_next(previous_request, previous_response)</a></code></p>
+<p class="firstline">Retrieves the next page of results.</p>
+<p class="toc_element">
+ <code><a href="#listManagedInstances">listManagedInstances(project, zone, instanceGroupManager, orderBy=None, maxResults=None, pageToken=None, filter=None)</a></code></p>
<p class="firstline">Lists all of the instances in the managed instance group. Each instance in the list has a currentAction, which indicates the action that the managed instance group is performing on the instance. For example, if the group is still creating an instance, the currentAction is CREATING. If a previous action failed, the list displays the errors for that failed action.</p>
<p class="toc_element">
+ <code><a href="#listManagedInstances_next">listManagedInstances_next(previous_request, previous_response)</a></code></p>
+<p class="firstline">Retrieves the next page of results.</p>
+<p class="toc_element">
<code><a href="#list_next">list_next(previous_request, previous_response)</a></code></p>
<p class="firstline">Retrieves the next page of results.</p>
<p class="toc_element">
- <code><a href="#patch">patch(project, zone, instanceGroupManager, body, requestId=None)</a></code></p>
+ <code><a href="#patch">patch(project, zone, instanceGroupManager, body=None, requestId=None)</a></code></p>
<p class="firstline">Updates a managed instance group using the information that you specify in the request. This operation is marked as DONE when the group is patched even if the instances in the group are still in the process of being patched. You must separately verify the status of the individual instances with the listManagedInstances method. This method supports PATCH semantics and uses the JSON merge patch format and processing rules.</p>
<p class="toc_element">
- <code><a href="#recreateInstances">recreateInstances(project, zone, instanceGroupManager, body, requestId=None)</a></code></p>
+ <code><a href="#recreateInstances">recreateInstances(project, zone, instanceGroupManager, body=None, requestId=None)</a></code></p>
<p class="firstline">Flags the specified instances in the managed instance group to be immediately recreated. The instances are deleted and recreated using the current instance template for the managed instance group. This operation is marked as DONE when the flag is set even if the instances have not yet been recreated. You must separately verify the status of the recreating action with the listmanagedinstances method.</p>
<p class="toc_element">
<code><a href="#resize">resize(project, zone, instanceGroupManager, size, requestId=None)</a></code></p>
<p class="firstline">Resizes the managed instance group. If you increase the size, the group creates new instances using the current instance template. If you decrease the size, the group deletes instances. The resize operation is marked DONE when the resize actions are scheduled even if the group has not yet added or deleted any instances. You must separately verify the status of the creating or deleting actions with the listmanagedinstances method.</p>
<p class="toc_element">
- <code><a href="#setInstanceTemplate">setInstanceTemplate(project, zone, instanceGroupManager, body, requestId=None)</a></code></p>
+ <code><a href="#setInstanceTemplate">setInstanceTemplate(project, zone, instanceGroupManager, body=None, requestId=None)</a></code></p>
<p class="firstline">Specifies the instance template to use when creating new instances in this group. The templates for existing instances in the group do not change unless you recreate them.</p>
<p class="toc_element">
- <code><a href="#setTargetPools">setTargetPools(project, zone, instanceGroupManager, body, requestId=None)</a></code></p>
+ <code><a href="#setTargetPools">setTargetPools(project, zone, instanceGroupManager, body=None, requestId=None)</a></code></p>
<p class="firstline">Modifies the target pools to which all instances in this managed instance group are assigned. The target pools automatically apply to all of the instances in the managed instance group. This operation is marked DONE when you make the request even if the instances have not yet been added to their target pools. The change might take some time to apply to all of the instances in the group depending on the size of the group.</p>
<h3>Method Details</h3>
<div class="method">
- <code class="details" id="abandonInstances">abandonInstances(project, zone, instanceGroupManager, body, requestId=None)</code>
+ <code class="details" id="abandonInstances">abandonInstances(project, zone, instanceGroupManager, body=None, requestId=None)</code>
<pre>Flags the specified instances to be removed from the managed instance group. Abandoning an instance does not delete the instance, but it does remove the instance from any target pools that are applied by the managed instance group. This method reduces the targetSize of the managed instance group by the number of instances that you abandon. This operation is marked as DONE when the action is scheduled even if the instances have not yet been removed from the group. You must separately verify the status of the abandoning action with the listmanagedinstances method.
If the group is part of a backend service that has enabled connection draining, it can take up to 60 seconds after the connection draining duration has elapsed before the VM instance is removed or deleted.
@@ -132,7 +147,7 @@
project: string, Project ID for this request. (required)
zone: string, The name of the zone where the managed instance group is located. (required)
instanceGroupManager: string, The name of the managed instance group. (required)
- body: object, The request body. (required)
+ body: object, The request body.
The object takes the form of:
{
@@ -152,26 +167,30 @@
{ # Represents an Operation resource.
#
+ # Google Compute Engine has three Operation resources:
+ #
+ # * [Global](/compute/docs/reference/rest/{$api_version}/globalOperations) * [Regional](/compute/docs/reference/rest/{$api_version}/regionOperations) * [Zonal](/compute/docs/reference/rest/{$api_version}/zoneOperations)
+ #
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
- # - For global operations, use the globalOperations resource.
- # - For regional operations, use the regionOperations resource.
- # - For zonal operations, use the zonalOperations resource.
+ # - For global operations, use the `globalOperations` resource.
+ # - For regional operations, use the `regionOperations` resource.
+ # - For zonal operations, use the `zonalOperations` resource.
#
- # For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
+ # For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
- "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
+ "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
- "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
- "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
+ "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
+ "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
- "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
+ "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
- "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
+ "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
@@ -186,10 +205,10 @@
],
},
],
- "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
+ "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
- "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
- "name": "A String", # [Output Only] Name of the resource.
+ "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
@@ -207,25 +226,26 @@
</div>
<div class="method">
- <code class="details" id="aggregatedList">aggregatedList(project, orderBy=None, maxResults=None, pageToken=None, filter=None)</code>
+ <code class="details" id="aggregatedList">aggregatedList(project, orderBy=None, maxResults=None, pageToken=None, filter=None, includeAllScopes=None)</code>
<pre>Retrieves the list of managed instance groups and groups them by zone.
Args:
project: string, Project ID for this request. (required)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
-You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
+You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
-Currently, only sorting by name or creationTimestamp desc is supported.
- maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
- pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
- filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <.
+Currently, only sorting by `name` or `creationTimestamp desc` is supported.
+ maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
+ pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
+ filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either `=`, `!=`, `>`, or `<`.
-For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance.
+For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`.
-You can also filter nested fields. For example, you could specify scheduling.automaticRestart = false to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
+You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
-To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake"). By default, each expression is an AND expression. However, you can include AND and OR expressions explicitly. For example, (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true).
+To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ```
+ includeAllScopes: boolean, Indicates whether every visible scope for each scope type (zone, region, global) should be included in the response. For new resource types added after this field, the flag has no effect as new resource types will always include every visible scope for each scope type in response. For resource types which predate this field, if this flag is omitted or false, only scopes of the scope types where the resource type is expected to be found will be included.
Returns:
An object of the form:
@@ -253,9 +273,13 @@
#
# For zonal Managed Instance Group, use the instanceGroupManagers resource.
#
- # For regional Managed Instance Group, use the regionInstanceGroupManagers resource. (== resource_for beta.instanceGroupManagers ==) (== resource_for v1.instanceGroupManagers ==) (== resource_for beta.regionInstanceGroupManagers ==) (== resource_for v1.regionInstanceGroupManagers ==)
+ # For regional Managed Instance Group, use the regionInstanceGroupManagers resource. (== resource_for {$api_version}.instanceGroupManagers ==) (== resource_for {$api_version}.regionInstanceGroupManagers ==)
"status": { # [Output Only] The status of this managed instance group.
"isStable": True or False, # [Output Only] A bit indicating whether the managed instance group is in a stable state. A stable state means that: none of the instances in the managed instance group is currently undergoing any type of change (for example, creation, restart, or deletion); no future changes are scheduled for instances in the managed instance group; and the managed instance group itself is not being modified.
+ "versionTarget": { # [Output Only] A status of consistency of Instances' versions with their target version specified by version field on Instance Group Manager.
+ "isReached": True or False, # [Output Only] A bit indicating whether version target has been reached in this managed instance group, i.e. all instances are in their target version. Instances' target version are specified by version field on Instance Group Manager.
+ },
+ "autoscaler": "A String", # [Output Only] The URL of the Autoscaler that targets this instance group manager.
},
"currentActions": { # [Output Only] The list of instance actions and the number of instances in this managed instance group that are scheduled for each of those actions.
"none": 42, # [Output Only] The number of instances in the managed instance group that are running and have no scheduled actions.
@@ -297,7 +321,7 @@
"initialDelaySec": 42, # The number of seconds that the managed instance group waits before it applies autohealing policies to new instances or recently recreated instances. This initial delay allows instances to initialize and run their startup scripts before the instance group determines that they are UNHEALTHY. This prevents the managed instance group from recreating its instances prematurely. This value must be from range [0, 3600].
},
],
- "targetSize": 42, # The target number of running instances for this managed instance group. Deleting or abandoning instances reduces this number. Resizing the group changes this number.
+ "targetSize": 42, # The target number of running instances for this managed instance group. You can reduce this number by using the instanceGroupManager deleteInstances or abandonInstances methods. Resizing the group also changes this number.
"region": "A String", # [Output Only] The URL of the region where the managed instance group resides (for regional resources).
"instanceGroup": "A String", # [Output Only] The URL of the Instance Group resource.
"kind": "compute#instanceGroupManager", # [Output Only] The resource type, which is always compute#instanceGroupManager for managed instance groups.
@@ -313,7 +337,7 @@
],
"baseInstanceName": "A String", # The base instance name to use for instances in this group. The value must be 1-58 characters long. Instances are named by appending a hyphen and a random four-character string to the base instance name. The base instance name must comply with RFC1035.
"updatePolicy": { # The update policy for this managed instance group.
- "type": "A String", # The type of update process. You can specify either PROACTIVE so that the instance group manager proactively executes actions in order to bring instances to their target versions or OPPORTUNISTIC so that no action is proactively executed but the update will be performed as part of other actions (for example, resizes or recreateInstances calls).
+ "replacementMethod": "A String", # What action should be used to replace instances. See minimal_action.REPLACE
"maxSurge": { # Encapsulates numeric value that can be either absolute or relative. # The maximum number of instances that can be created above the specified targetSize during the update process. By default, a fixed value of 1 is used. This value can be either a fixed number or a percentage if the instance group has 10 or more instances. If you set a percentage, the number of instances will be rounded up if necessary.
#
# At least one of either maxSurge or maxUnavailable must be greater than 0. Learn more about maxSurge.
@@ -326,6 +350,9 @@
"percent": 42, # Specifies a percentage of instances between 0 to 100%, inclusive. For example, specify 80 for 80%.
},
"minimalAction": "A String", # Minimal action to be taken on an instance. You can specify either RESTART to restart existing instances or REPLACE to delete and create new instances from the target template. If you specify a RESTART, the Updater will attempt to perform that action only. However, if the Updater determines that the minimal action you specify is not enough to perform the update, it might perform a more disruptive action.
+ "instanceRedistributionType": "A String", # The instance redistribution policy for regional managed instance groups. Valid values are:
+ # - PROACTIVE (default): The group attempts to maintain an even distribution of VM instances across zones in the region.
+ # - NONE: For non-autoscaled groups, proactive redistribution is disabled.
"maxUnavailable": { # Encapsulates numeric value that can be either absolute or relative. # The maximum number of instances that can be unavailable during the update process. An instance is considered available if all of the following conditions are satisfied:
#
#
@@ -341,6 +368,7 @@
"fixed": 42, # Specifies a fixed number of VM instances. This must be a positive integer.
"percent": 42, # Specifies a percentage of instances between 0 to 100%, inclusive. For example, specify 80 for 80%.
},
+ "type": "A String", # The type of update process. You can specify either PROACTIVE so that the instance group manager proactively executes actions in order to bring instances to their target versions or OPPORTUNISTIC so that no action is proactively executed but the update will be performed as part of other actions (for example, resizes or recreateInstances calls).
},
"fingerprint": "A String", # Fingerprint of this resource. This field may be used in optimistic locking. It will be ignored when inserting an InstanceGroupManager. An up-to-date fingerprint must be provided in order to update the InstanceGroupManager, otherwise the request will fail with error 412 conditionNotMet.
#
@@ -391,6 +419,186 @@
</div>
<div class="method">
+ <code class="details" id="applyUpdatesToInstances">applyUpdatesToInstances(project, zone, instanceGroupManager, body=None)</code>
+ <pre>Applies changes to selected instances on the managed instance group. This method can be used to apply new overrides and/or new versions.
+
+Args:
+ project: string, Project ID for this request. (required)
+ zone: string, The name of the zone where the managed instance group is located. Should conform to RFC1035. (required)
+ instanceGroupManager: string, The name of the managed instance group, should conform to RFC1035. (required)
+ body: object, The request body.
+ The object takes the form of:
+
+{ # InstanceGroupManagers.applyUpdatesToInstances
+ "instances": [ # The list of URLs of one or more instances for which you want to apply updates. Each URL can be a full URL or a partial URL, such as zones/[ZONE]/instances/[INSTANCE_NAME].
+ "A String",
+ ],
+ "mostDisruptiveAllowedAction": "A String", # The most disruptive action that you want to perform on each instance during the update:
+ # - REPLACE: Delete the instance and create it again.
+ # - RESTART: Stop the instance and start it again.
+ # - REFRESH: Do not stop the instance.
+ # - NONE: Do not disrupt the instance at all. By default, the most disruptive allowed action is REPLACE. If your update requires a more disruptive action than you set with this flag, the update request will fail.
+ "minimalAction": "A String", # The minimal action that you want to perform on each instance during the update:
+ # - REPLACE: At minimum, delete the instance and create it again.
+ # - RESTART: Stop the instance and start it again.
+ # - REFRESH: Do not stop the instance.
+ # - NONE: Do not disrupt the instance at all. By default, the minimum action is NONE. If your update requires a more disruptive action than you set with this flag, the necessary action is performed to execute the update.
+ }
+
+
+Returns:
+ An object of the form:
+
+ { # Represents an Operation resource.
+ #
+ # Google Compute Engine has three Operation resources:
+ #
+ # * [Global](/compute/docs/reference/rest/{$api_version}/globalOperations) * [Regional](/compute/docs/reference/rest/{$api_version}/regionOperations) * [Zonal](/compute/docs/reference/rest/{$api_version}/zoneOperations)
+ #
+ # You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
+ #
+ # Operations can be global, regional or zonal.
+ # - For global operations, use the `globalOperations` resource.
+ # - For regional operations, use the `regionOperations` resource.
+ # - For zonal operations, use the `zonalOperations` resource.
+ #
+ # For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
+ "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
+ "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
+ "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
+ "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
+ "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
+ "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
+ "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
+ "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
+ "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
+ "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
+ "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
+ "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
+ "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
+ "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
+ {
+ "message": "A String", # [Output Only] A human-readable description of the warning code.
+ "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
+ "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
+ # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
+ {
+ "value": "A String", # [Output Only] A warning data value corresponding to the key.
+ "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
+ },
+ ],
+ },
+ ],
+ "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
+ "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
+ "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "name": "A String", # [Output Only] Name of the operation.
+ "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
+ "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
+ "errors": [ # [Output Only] The array of errors encountered while processing this operation.
+ {
+ "message": "A String", # [Output Only] An optional, human-readable error message.
+ "code": "A String", # [Output Only] The error type identifier for this error.
+ "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
+ },
+ ],
+ },
+ "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
+ "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
+ "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
+ }</pre>
+</div>
+
+<div class="method">
+ <code class="details" id="createInstances">createInstances(project, zone, instanceGroupManager, body=None, requestId=None)</code>
+ <pre>Creates instances with per-instance configs in this managed instance group. Instances are created using the current instance template. The create instances operation is marked DONE if the createInstances request is successful. The underlying actions take additional time. You must separately verify the status of the creating or actions with the listmanagedinstances method.
+
+Args:
+ project: string, Project ID for this request. (required)
+ zone: string, The name of the zone where the managed instance group is located. It should conform to RFC1035. (required)
+ instanceGroupManager: string, The name of the managed instance group. It should conform to RFC1035. (required)
+ body: object, The request body.
+ The object takes the form of:
+
+{ # InstanceGroupManagers.createInstances
+ "instances": [ # [Required] List of specifications of per-instance configs.
+ {
+ "name": "A String", # The name of a per-instance config and its corresponding instance. Serves as a merge key during UpdatePerInstanceConfigs operations, that is, if a per-instance config with the same name exists then it will be updated, otherwise a new one will be created for the VM instance with the same name. An attempt to create a per-instance config for a VM instance that either doesn't exist or is not part of the group will result in an error.
+ "fingerprint": "A String", # Fingerprint of this per-instance config. This field can be used in optimistic locking. It is ignored when inserting a per-instance config. An up-to-date fingerprint must be provided in order to update an existing per-instance config or the field needs to be unset.
+ },
+ ],
+ }
+
+ requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
+
+For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request.
+
+The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
+
+Returns:
+ An object of the form:
+
+ { # Represents an Operation resource.
+ #
+ # Google Compute Engine has three Operation resources:
+ #
+ # * [Global](/compute/docs/reference/rest/{$api_version}/globalOperations) * [Regional](/compute/docs/reference/rest/{$api_version}/regionOperations) * [Zonal](/compute/docs/reference/rest/{$api_version}/zoneOperations)
+ #
+ # You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
+ #
+ # Operations can be global, regional or zonal.
+ # - For global operations, use the `globalOperations` resource.
+ # - For regional operations, use the `regionOperations` resource.
+ # - For zonal operations, use the `zonalOperations` resource.
+ #
+ # For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
+ "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
+ "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
+ "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
+ "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
+ "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
+ "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
+ "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
+ "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
+ "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
+ "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
+ "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
+ "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
+ "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
+ "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
+ {
+ "message": "A String", # [Output Only] A human-readable description of the warning code.
+ "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
+ "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
+ # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
+ {
+ "value": "A String", # [Output Only] A warning data value corresponding to the key.
+ "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
+ },
+ ],
+ },
+ ],
+ "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
+ "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
+ "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "name": "A String", # [Output Only] Name of the operation.
+ "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
+ "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
+ "errors": [ # [Output Only] The array of errors encountered while processing this operation.
+ {
+ "message": "A String", # [Output Only] An optional, human-readable error message.
+ "code": "A String", # [Output Only] The error type identifier for this error.
+ "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
+ },
+ ],
+ },
+ "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
+ "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
+ "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
+ }</pre>
+</div>
+
+<div class="method">
<code class="details" id="delete">delete(project, zone, instanceGroupManager, requestId=None)</code>
<pre>Deletes the specified managed instance group and all of the instances in that group. Note that the instance group must not belong to a backend service. Read Deleting an instance group for more information.
@@ -409,26 +617,30 @@
{ # Represents an Operation resource.
#
+ # Google Compute Engine has three Operation resources:
+ #
+ # * [Global](/compute/docs/reference/rest/{$api_version}/globalOperations) * [Regional](/compute/docs/reference/rest/{$api_version}/regionOperations) * [Zonal](/compute/docs/reference/rest/{$api_version}/zoneOperations)
+ #
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
- # - For global operations, use the globalOperations resource.
- # - For regional operations, use the regionOperations resource.
- # - For zonal operations, use the zonalOperations resource.
+ # - For global operations, use the `globalOperations` resource.
+ # - For regional operations, use the `regionOperations` resource.
+ # - For zonal operations, use the `zonalOperations` resource.
#
- # For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
+ # For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
- "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
+ "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
- "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
- "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
+ "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
+ "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
- "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
+ "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
- "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
+ "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
@@ -443,10 +655,10 @@
],
},
],
- "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
+ "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
- "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
- "name": "A String", # [Output Only] Name of the resource.
+ "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
@@ -464,7 +676,7 @@
</div>
<div class="method">
- <code class="details" id="deleteInstances">deleteInstances(project, zone, instanceGroupManager, body, requestId=None)</code>
+ <code class="details" id="deleteInstances">deleteInstances(project, zone, instanceGroupManager, body=None, requestId=None)</code>
<pre>Flags the specified instances in the managed instance group for immediate deletion. The instances are also removed from any target pools of which they were a member. This method reduces the targetSize of the managed instance group by the number of instances that you delete. This operation is marked as DONE when the action is scheduled even if the instances are still being deleted. You must separately verify the status of the deleting action with the listmanagedinstances method.
If the group is part of a backend service that has enabled connection draining, it can take up to 60 seconds after the connection draining duration has elapsed before the VM instance is removed or deleted.
@@ -475,7 +687,7 @@
project: string, Project ID for this request. (required)
zone: string, The name of the zone where the managed instance group is located. (required)
instanceGroupManager: string, The name of the managed instance group. (required)
- body: object, The request body. (required)
+ body: object, The request body.
The object takes the form of:
{
@@ -495,26 +707,30 @@
{ # Represents an Operation resource.
#
+ # Google Compute Engine has three Operation resources:
+ #
+ # * [Global](/compute/docs/reference/rest/{$api_version}/globalOperations) * [Regional](/compute/docs/reference/rest/{$api_version}/regionOperations) * [Zonal](/compute/docs/reference/rest/{$api_version}/zoneOperations)
+ #
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
- # - For global operations, use the globalOperations resource.
- # - For regional operations, use the regionOperations resource.
- # - For zonal operations, use the zonalOperations resource.
+ # - For global operations, use the `globalOperations` resource.
+ # - For regional operations, use the `regionOperations` resource.
+ # - For zonal operations, use the `zonalOperations` resource.
#
- # For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
+ # For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
- "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
+ "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
- "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
- "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
+ "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
+ "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
- "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
+ "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
- "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
+ "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
@@ -529,10 +745,10 @@
],
},
],
- "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
+ "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
- "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
- "name": "A String", # [Output Only] Name of the resource.
+ "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
@@ -567,9 +783,13 @@
#
# For zonal Managed Instance Group, use the instanceGroupManagers resource.
#
- # For regional Managed Instance Group, use the regionInstanceGroupManagers resource. (== resource_for beta.instanceGroupManagers ==) (== resource_for v1.instanceGroupManagers ==) (== resource_for beta.regionInstanceGroupManagers ==) (== resource_for v1.regionInstanceGroupManagers ==)
+ # For regional Managed Instance Group, use the regionInstanceGroupManagers resource. (== resource_for {$api_version}.instanceGroupManagers ==) (== resource_for {$api_version}.regionInstanceGroupManagers ==)
"status": { # [Output Only] The status of this managed instance group.
"isStable": True or False, # [Output Only] A bit indicating whether the managed instance group is in a stable state. A stable state means that: none of the instances in the managed instance group is currently undergoing any type of change (for example, creation, restart, or deletion); no future changes are scheduled for instances in the managed instance group; and the managed instance group itself is not being modified.
+ "versionTarget": { # [Output Only] A status of consistency of Instances' versions with their target version specified by version field on Instance Group Manager.
+ "isReached": True or False, # [Output Only] A bit indicating whether version target has been reached in this managed instance group, i.e. all instances are in their target version. Instances' target version are specified by version field on Instance Group Manager.
+ },
+ "autoscaler": "A String", # [Output Only] The URL of the Autoscaler that targets this instance group manager.
},
"currentActions": { # [Output Only] The list of instance actions and the number of instances in this managed instance group that are scheduled for each of those actions.
"none": 42, # [Output Only] The number of instances in the managed instance group that are running and have no scheduled actions.
@@ -611,7 +831,7 @@
"initialDelaySec": 42, # The number of seconds that the managed instance group waits before it applies autohealing policies to new instances or recently recreated instances. This initial delay allows instances to initialize and run their startup scripts before the instance group determines that they are UNHEALTHY. This prevents the managed instance group from recreating its instances prematurely. This value must be from range [0, 3600].
},
],
- "targetSize": 42, # The target number of running instances for this managed instance group. Deleting or abandoning instances reduces this number. Resizing the group changes this number.
+ "targetSize": 42, # The target number of running instances for this managed instance group. You can reduce this number by using the instanceGroupManager deleteInstances or abandonInstances methods. Resizing the group also changes this number.
"region": "A String", # [Output Only] The URL of the region where the managed instance group resides (for regional resources).
"instanceGroup": "A String", # [Output Only] The URL of the Instance Group resource.
"kind": "compute#instanceGroupManager", # [Output Only] The resource type, which is always compute#instanceGroupManager for managed instance groups.
@@ -627,7 +847,7 @@
],
"baseInstanceName": "A String", # The base instance name to use for instances in this group. The value must be 1-58 characters long. Instances are named by appending a hyphen and a random four-character string to the base instance name. The base instance name must comply with RFC1035.
"updatePolicy": { # The update policy for this managed instance group.
- "type": "A String", # The type of update process. You can specify either PROACTIVE so that the instance group manager proactively executes actions in order to bring instances to their target versions or OPPORTUNISTIC so that no action is proactively executed but the update will be performed as part of other actions (for example, resizes or recreateInstances calls).
+ "replacementMethod": "A String", # What action should be used to replace instances. See minimal_action.REPLACE
"maxSurge": { # Encapsulates numeric value that can be either absolute or relative. # The maximum number of instances that can be created above the specified targetSize during the update process. By default, a fixed value of 1 is used. This value can be either a fixed number or a percentage if the instance group has 10 or more instances. If you set a percentage, the number of instances will be rounded up if necessary.
#
# At least one of either maxSurge or maxUnavailable must be greater than 0. Learn more about maxSurge.
@@ -640,6 +860,9 @@
"percent": 42, # Specifies a percentage of instances between 0 to 100%, inclusive. For example, specify 80 for 80%.
},
"minimalAction": "A String", # Minimal action to be taken on an instance. You can specify either RESTART to restart existing instances or REPLACE to delete and create new instances from the target template. If you specify a RESTART, the Updater will attempt to perform that action only. However, if the Updater determines that the minimal action you specify is not enough to perform the update, it might perform a more disruptive action.
+ "instanceRedistributionType": "A String", # The instance redistribution policy for regional managed instance groups. Valid values are:
+ # - PROACTIVE (default): The group attempts to maintain an even distribution of VM instances across zones in the region.
+ # - NONE: For non-autoscaled groups, proactive redistribution is disabled.
"maxUnavailable": { # Encapsulates numeric value that can be either absolute or relative. # The maximum number of instances that can be unavailable during the update process. An instance is considered available if all of the following conditions are satisfied:
#
#
@@ -655,6 +878,7 @@
"fixed": 42, # Specifies a fixed number of VM instances. This must be a positive integer.
"percent": 42, # Specifies a percentage of instances between 0 to 100%, inclusive. For example, specify 80 for 80%.
},
+ "type": "A String", # The type of update process. You can specify either PROACTIVE so that the instance group manager proactively executes actions in order to bring instances to their target versions or OPPORTUNISTIC so that no action is proactively executed but the update will be performed as part of other actions (for example, resizes or recreateInstances calls).
},
"fingerprint": "A String", # Fingerprint of this resource. This field may be used in optimistic locking. It will be ignored when inserting an InstanceGroupManager. An up-to-date fingerprint must be provided in order to update the InstanceGroupManager, otherwise the request will fail with error 412 conditionNotMet.
#
@@ -674,7 +898,7 @@
</div>
<div class="method">
- <code class="details" id="insert">insert(project, zone, body, requestId=None)</code>
+ <code class="details" id="insert">insert(project, zone, body=None, requestId=None)</code>
<pre>Creates a managed instance group using the information that you specify in the request. After the group is created, instances in the group are created using the specified instance template. This operation is marked as DONE when the group is created even if the instances in the group have not yet been created. You must separately verify the status of the individual instances with the listmanagedinstances method.
A managed instance group can have up to 1000 VM instances per group. Please contact Cloud Support if you need an increase in this limit.
@@ -682,7 +906,7 @@
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone where you want to create the managed instance group. (required)
- body: object, The request body. (required)
+ body: object, The request body.
The object takes the form of:
{ # Represents a Managed Instance Group resource.
@@ -691,9 +915,13 @@
#
# For zonal Managed Instance Group, use the instanceGroupManagers resource.
#
- # For regional Managed Instance Group, use the regionInstanceGroupManagers resource. (== resource_for beta.instanceGroupManagers ==) (== resource_for v1.instanceGroupManagers ==) (== resource_for beta.regionInstanceGroupManagers ==) (== resource_for v1.regionInstanceGroupManagers ==)
+ # For regional Managed Instance Group, use the regionInstanceGroupManagers resource. (== resource_for {$api_version}.instanceGroupManagers ==) (== resource_for {$api_version}.regionInstanceGroupManagers ==)
"status": { # [Output Only] The status of this managed instance group.
"isStable": True or False, # [Output Only] A bit indicating whether the managed instance group is in a stable state. A stable state means that: none of the instances in the managed instance group is currently undergoing any type of change (for example, creation, restart, or deletion); no future changes are scheduled for instances in the managed instance group; and the managed instance group itself is not being modified.
+ "versionTarget": { # [Output Only] A status of consistency of Instances' versions with their target version specified by version field on Instance Group Manager.
+ "isReached": True or False, # [Output Only] A bit indicating whether version target has been reached in this managed instance group, i.e. all instances are in their target version. Instances' target version are specified by version field on Instance Group Manager.
+ },
+ "autoscaler": "A String", # [Output Only] The URL of the Autoscaler that targets this instance group manager.
},
"currentActions": { # [Output Only] The list of instance actions and the number of instances in this managed instance group that are scheduled for each of those actions.
"none": 42, # [Output Only] The number of instances in the managed instance group that are running and have no scheduled actions.
@@ -735,7 +963,7 @@
"initialDelaySec": 42, # The number of seconds that the managed instance group waits before it applies autohealing policies to new instances or recently recreated instances. This initial delay allows instances to initialize and run their startup scripts before the instance group determines that they are UNHEALTHY. This prevents the managed instance group from recreating its instances prematurely. This value must be from range [0, 3600].
},
],
- "targetSize": 42, # The target number of running instances for this managed instance group. Deleting or abandoning instances reduces this number. Resizing the group changes this number.
+ "targetSize": 42, # The target number of running instances for this managed instance group. You can reduce this number by using the instanceGroupManager deleteInstances or abandonInstances methods. Resizing the group also changes this number.
"region": "A String", # [Output Only] The URL of the region where the managed instance group resides (for regional resources).
"instanceGroup": "A String", # [Output Only] The URL of the Instance Group resource.
"kind": "compute#instanceGroupManager", # [Output Only] The resource type, which is always compute#instanceGroupManager for managed instance groups.
@@ -751,7 +979,7 @@
],
"baseInstanceName": "A String", # The base instance name to use for instances in this group. The value must be 1-58 characters long. Instances are named by appending a hyphen and a random four-character string to the base instance name. The base instance name must comply with RFC1035.
"updatePolicy": { # The update policy for this managed instance group.
- "type": "A String", # The type of update process. You can specify either PROACTIVE so that the instance group manager proactively executes actions in order to bring instances to their target versions or OPPORTUNISTIC so that no action is proactively executed but the update will be performed as part of other actions (for example, resizes or recreateInstances calls).
+ "replacementMethod": "A String", # What action should be used to replace instances. See minimal_action.REPLACE
"maxSurge": { # Encapsulates numeric value that can be either absolute or relative. # The maximum number of instances that can be created above the specified targetSize during the update process. By default, a fixed value of 1 is used. This value can be either a fixed number or a percentage if the instance group has 10 or more instances. If you set a percentage, the number of instances will be rounded up if necessary.
#
# At least one of either maxSurge or maxUnavailable must be greater than 0. Learn more about maxSurge.
@@ -764,6 +992,9 @@
"percent": 42, # Specifies a percentage of instances between 0 to 100%, inclusive. For example, specify 80 for 80%.
},
"minimalAction": "A String", # Minimal action to be taken on an instance. You can specify either RESTART to restart existing instances or REPLACE to delete and create new instances from the target template. If you specify a RESTART, the Updater will attempt to perform that action only. However, if the Updater determines that the minimal action you specify is not enough to perform the update, it might perform a more disruptive action.
+ "instanceRedistributionType": "A String", # The instance redistribution policy for regional managed instance groups. Valid values are:
+ # - PROACTIVE (default): The group attempts to maintain an even distribution of VM instances across zones in the region.
+ # - NONE: For non-autoscaled groups, proactive redistribution is disabled.
"maxUnavailable": { # Encapsulates numeric value that can be either absolute or relative. # The maximum number of instances that can be unavailable during the update process. An instance is considered available if all of the following conditions are satisfied:
#
#
@@ -779,6 +1010,7 @@
"fixed": 42, # Specifies a fixed number of VM instances. This must be a positive integer.
"percent": 42, # Specifies a percentage of instances between 0 to 100%, inclusive. For example, specify 80 for 80%.
},
+ "type": "A String", # The type of update process. You can specify either PROACTIVE so that the instance group manager proactively executes actions in order to bring instances to their target versions or OPPORTUNISTIC so that no action is proactively executed but the update will be performed as part of other actions (for example, resizes or recreateInstances calls).
},
"fingerprint": "A String", # Fingerprint of this resource. This field may be used in optimistic locking. It will be ignored when inserting an InstanceGroupManager. An up-to-date fingerprint must be provided in order to update the InstanceGroupManager, otherwise the request will fail with error 412 conditionNotMet.
#
@@ -807,26 +1039,30 @@
{ # Represents an Operation resource.
#
+ # Google Compute Engine has three Operation resources:
+ #
+ # * [Global](/compute/docs/reference/rest/{$api_version}/globalOperations) * [Regional](/compute/docs/reference/rest/{$api_version}/regionOperations) * [Zonal](/compute/docs/reference/rest/{$api_version}/zoneOperations)
+ #
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
- # - For global operations, use the globalOperations resource.
- # - For regional operations, use the regionOperations resource.
- # - For zonal operations, use the zonalOperations resource.
+ # - For global operations, use the `globalOperations` resource.
+ # - For regional operations, use the `regionOperations` resource.
+ # - For zonal operations, use the `zonalOperations` resource.
#
- # For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
+ # For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
- "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
+ "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
- "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
- "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
+ "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
+ "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
- "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
+ "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
- "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
+ "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
@@ -841,10 +1077,10 @@
],
},
],
- "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
+ "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
- "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
- "name": "A String", # [Output Only] Name of the resource.
+ "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
@@ -870,18 +1106,18 @@
zone: string, The name of the zone where the managed instance group is located. (required)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
-You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
+You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
-Currently, only sorting by name or creationTimestamp desc is supported.
- maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
- pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
- filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <.
+Currently, only sorting by `name` or `creationTimestamp desc` is supported.
+ maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
+ pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
+ filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either `=`, `!=`, `>`, or `<`.
-For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance.
+For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`.
-You can also filter nested fields. For example, you could specify scheduling.automaticRestart = false to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
+You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
-To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake"). By default, each expression is an AND expression. However, you can include AND and OR expressions explicitly. For example, (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true).
+To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ```
Returns:
An object of the form:
@@ -896,9 +1132,13 @@
#
# For zonal Managed Instance Group, use the instanceGroupManagers resource.
#
- # For regional Managed Instance Group, use the regionInstanceGroupManagers resource. (== resource_for beta.instanceGroupManagers ==) (== resource_for v1.instanceGroupManagers ==) (== resource_for beta.regionInstanceGroupManagers ==) (== resource_for v1.regionInstanceGroupManagers ==)
+ # For regional Managed Instance Group, use the regionInstanceGroupManagers resource. (== resource_for {$api_version}.instanceGroupManagers ==) (== resource_for {$api_version}.regionInstanceGroupManagers ==)
"status": { # [Output Only] The status of this managed instance group.
"isStable": True or False, # [Output Only] A bit indicating whether the managed instance group is in a stable state. A stable state means that: none of the instances in the managed instance group is currently undergoing any type of change (for example, creation, restart, or deletion); no future changes are scheduled for instances in the managed instance group; and the managed instance group itself is not being modified.
+ "versionTarget": { # [Output Only] A status of consistency of Instances' versions with their target version specified by version field on Instance Group Manager.
+ "isReached": True or False, # [Output Only] A bit indicating whether version target has been reached in this managed instance group, i.e. all instances are in their target version. Instances' target version are specified by version field on Instance Group Manager.
+ },
+ "autoscaler": "A String", # [Output Only] The URL of the Autoscaler that targets this instance group manager.
},
"currentActions": { # [Output Only] The list of instance actions and the number of instances in this managed instance group that are scheduled for each of those actions.
"none": 42, # [Output Only] The number of instances in the managed instance group that are running and have no scheduled actions.
@@ -940,7 +1180,7 @@
"initialDelaySec": 42, # The number of seconds that the managed instance group waits before it applies autohealing policies to new instances or recently recreated instances. This initial delay allows instances to initialize and run their startup scripts before the instance group determines that they are UNHEALTHY. This prevents the managed instance group from recreating its instances prematurely. This value must be from range [0, 3600].
},
],
- "targetSize": 42, # The target number of running instances for this managed instance group. Deleting or abandoning instances reduces this number. Resizing the group changes this number.
+ "targetSize": 42, # The target number of running instances for this managed instance group. You can reduce this number by using the instanceGroupManager deleteInstances or abandonInstances methods. Resizing the group also changes this number.
"region": "A String", # [Output Only] The URL of the region where the managed instance group resides (for regional resources).
"instanceGroup": "A String", # [Output Only] The URL of the Instance Group resource.
"kind": "compute#instanceGroupManager", # [Output Only] The resource type, which is always compute#instanceGroupManager for managed instance groups.
@@ -956,7 +1196,7 @@
],
"baseInstanceName": "A String", # The base instance name to use for instances in this group. The value must be 1-58 characters long. Instances are named by appending a hyphen and a random four-character string to the base instance name. The base instance name must comply with RFC1035.
"updatePolicy": { # The update policy for this managed instance group.
- "type": "A String", # The type of update process. You can specify either PROACTIVE so that the instance group manager proactively executes actions in order to bring instances to their target versions or OPPORTUNISTIC so that no action is proactively executed but the update will be performed as part of other actions (for example, resizes or recreateInstances calls).
+ "replacementMethod": "A String", # What action should be used to replace instances. See minimal_action.REPLACE
"maxSurge": { # Encapsulates numeric value that can be either absolute or relative. # The maximum number of instances that can be created above the specified targetSize during the update process. By default, a fixed value of 1 is used. This value can be either a fixed number or a percentage if the instance group has 10 or more instances. If you set a percentage, the number of instances will be rounded up if necessary.
#
# At least one of either maxSurge or maxUnavailable must be greater than 0. Learn more about maxSurge.
@@ -969,6 +1209,9 @@
"percent": 42, # Specifies a percentage of instances between 0 to 100%, inclusive. For example, specify 80 for 80%.
},
"minimalAction": "A String", # Minimal action to be taken on an instance. You can specify either RESTART to restart existing instances or REPLACE to delete and create new instances from the target template. If you specify a RESTART, the Updater will attempt to perform that action only. However, if the Updater determines that the minimal action you specify is not enough to perform the update, it might perform a more disruptive action.
+ "instanceRedistributionType": "A String", # The instance redistribution policy for regional managed instance groups. Valid values are:
+ # - PROACTIVE (default): The group attempts to maintain an even distribution of VM instances across zones in the region.
+ # - NONE: For non-autoscaled groups, proactive redistribution is disabled.
"maxUnavailable": { # Encapsulates numeric value that can be either absolute or relative. # The maximum number of instances that can be unavailable during the update process. An instance is considered available if all of the following conditions are satisfied:
#
#
@@ -984,6 +1227,7 @@
"fixed": 42, # Specifies a fixed number of VM instances. This must be a positive integer.
"percent": 42, # Specifies a percentage of instances between 0 to 100%, inclusive. For example, specify 80 for 80%.
},
+ "type": "A String", # The type of update process. You can specify either PROACTIVE so that the instance group manager proactively executes actions in order to bring instances to their target versions or OPPORTUNISTIC so that no action is proactively executed but the update will be performed as part of other actions (for example, resizes or recreateInstances calls).
},
"fingerprint": "A String", # Fingerprint of this resource. This field may be used in optimistic locking. It will be ignored when inserting an InstanceGroupManager. An up-to-date fingerprint must be provided in order to update the InstanceGroupManager, otherwise the request will fail with error 412 conditionNotMet.
#
@@ -1018,35 +1262,104 @@
</div>
<div class="method">
- <code class="details" id="listManagedInstances">listManagedInstances(project, zone, instanceGroupManager, order_by=None, maxResults=None, pageToken=None, filter=None)</code>
+ <code class="details" id="listErrors">listErrors(project, zone, instanceGroupManager, orderBy=None, maxResults=None, pageToken=None, filter=None)</code>
+ <pre>Lists all errors thrown by actions on instances for a given managed instance group.
+
+Args:
+ project: string, Project ID for this request. (required)
+ zone: string, The name of the zone where the managed instance group is located. It should conform to RFC1035. (required)
+ instanceGroupManager: string, The name of the managed instance group. It must be a string that meets the requirements in RFC1035, or an unsigned long integer: must match regexp pattern: (?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?)|[1-9][0-9]{0,19}. (required)
+ orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
+
+You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
+
+Currently, only sorting by `name` or `creationTimestamp desc` is supported.
+ maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
+ pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
+ filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either `=`, `!=`, `>`, or `<`.
+
+For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`.
+
+You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
+
+To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ```
+
+Returns:
+ An object of the form:
+
+ {
+ "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
+ "items": [ # [Output Only] The list of errors of the managed instance group.
+ {
+ "timestamp": "A String", # [Output Only] The time that this error occurred. This value is in RFC3339 text format.
+ "instanceActionDetails": { # [Output Only] Details of the instance action that triggered this error. May be null, if the error was not caused by an action on an instance. This field is optional.
+ "action": "A String", # [Output Only] Action that managed instance group was executing on the instance when the error occurred. Possible values:
+ "instance": "A String", # [Output Only] The URL of the instance. The URL can be set even if the instance has not yet been created.
+ "version": { # [Output Only] Version this instance was created from, or was being created from, but the creation failed. Corresponds to one of the versions that were set on the Instance Group Manager resource at the time this instance was being created.
+ "instanceTemplate": "A String", # [Output Only] The intended template of the instance. This field is empty when current_action is one of { DELETING, ABANDONING }.
+ "name": "A String", # [Output Only] Name of the version.
+ },
+ },
+ "error": { # [Output Only] Contents of the error.
+ "message": "A String", # [Output Only] Error message.
+ "code": "A String", # [Output Only] Error code.
+ },
+ },
+ ],
+ }</pre>
+</div>
+
+<div class="method">
+ <code class="details" id="listErrors_next">listErrors_next(previous_request, previous_response)</code>
+ <pre>Retrieves the next page of results.
+
+Args:
+ previous_request: The request for the previous page. (required)
+ previous_response: The response from the request for the previous page. (required)
+
+Returns:
+ A request object that you can call 'execute()' on to request the next
+ page. Returns None if there are no more items in the collection.
+ </pre>
+</div>
+
+<div class="method">
+ <code class="details" id="listManagedInstances">listManagedInstances(project, zone, instanceGroupManager, orderBy=None, maxResults=None, pageToken=None, filter=None)</code>
<pre>Lists all of the instances in the managed instance group. Each instance in the list has a currentAction, which indicates the action that the managed instance group is performing on the instance. For example, if the group is still creating an instance, the currentAction is CREATING. If a previous action failed, the list displays the errors for that failed action.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone where the managed instance group is located. (required)
instanceGroupManager: string, The name of the managed instance group. (required)
- order_by: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
+ orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
-You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
+You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
-Currently, only sorting by name or creationTimestamp desc is supported.
- maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
- pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
- filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <.
+Currently, only sorting by `name` or `creationTimestamp desc` is supported.
+ maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
+ pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
+ filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either `=`, `!=`, `>`, or `<`.
-For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance.
+For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`.
-You can also filter nested fields. For example, you could specify scheduling.automaticRestart = false to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
+You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
-To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake"). By default, each expression is an AND expression. However, you can include AND and OR expressions explicitly. For example, (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true).
+To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ```
Returns:
An object of the form:
{
+ "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"managedInstances": [ # [Output Only] The list of instances in the managed instance group.
{ # A Managed Instance resource.
"instanceStatus": "A String", # [Output Only] The status of the instance. This field is empty when the instance does not exist.
+ "instanceHealth": [ # [Output Only] Health state of the instance per health-check.
+ {
+ "healthCheck": "A String", # [Output Only] The URL for the health check that verifies whether the instance is healthy.
+ "detailedHealthState": "A String", # [Output Only] The current detailed instance health state.
+ },
+ ],
"lastAttempt": { # [Output Only] Information about the last attempt to create or delete the instance.
"errors": { # [Output Only] Encountered errors during the last attempt to create or delete the instance.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
@@ -1080,6 +1393,20 @@
</div>
<div class="method">
+ <code class="details" id="listManagedInstances_next">listManagedInstances_next(previous_request, previous_response)</code>
+ <pre>Retrieves the next page of results.
+
+Args:
+ previous_request: The request for the previous page. (required)
+ previous_response: The response from the request for the previous page. (required)
+
+Returns:
+ A request object that you can call 'execute()' on to request the next
+ page. Returns None if there are no more items in the collection.
+ </pre>
+</div>
+
+<div class="method">
<code class="details" id="list_next">list_next(previous_request, previous_response)</code>
<pre>Retrieves the next page of results.
@@ -1094,14 +1421,14 @@
</div>
<div class="method">
- <code class="details" id="patch">patch(project, zone, instanceGroupManager, body, requestId=None)</code>
+ <code class="details" id="patch">patch(project, zone, instanceGroupManager, body=None, requestId=None)</code>
<pre>Updates a managed instance group using the information that you specify in the request. This operation is marked as DONE when the group is patched even if the instances in the group are still in the process of being patched. You must separately verify the status of the individual instances with the listManagedInstances method. This method supports PATCH semantics and uses the JSON merge patch format and processing rules.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone where you want to create the managed instance group. (required)
instanceGroupManager: string, The name of the instance group manager. (required)
- body: object, The request body. (required)
+ body: object, The request body.
The object takes the form of:
{ # Represents a Managed Instance Group resource.
@@ -1110,9 +1437,13 @@
#
# For zonal Managed Instance Group, use the instanceGroupManagers resource.
#
- # For regional Managed Instance Group, use the regionInstanceGroupManagers resource. (== resource_for beta.instanceGroupManagers ==) (== resource_for v1.instanceGroupManagers ==) (== resource_for beta.regionInstanceGroupManagers ==) (== resource_for v1.regionInstanceGroupManagers ==)
+ # For regional Managed Instance Group, use the regionInstanceGroupManagers resource. (== resource_for {$api_version}.instanceGroupManagers ==) (== resource_for {$api_version}.regionInstanceGroupManagers ==)
"status": { # [Output Only] The status of this managed instance group.
"isStable": True or False, # [Output Only] A bit indicating whether the managed instance group is in a stable state. A stable state means that: none of the instances in the managed instance group is currently undergoing any type of change (for example, creation, restart, or deletion); no future changes are scheduled for instances in the managed instance group; and the managed instance group itself is not being modified.
+ "versionTarget": { # [Output Only] A status of consistency of Instances' versions with their target version specified by version field on Instance Group Manager.
+ "isReached": True or False, # [Output Only] A bit indicating whether version target has been reached in this managed instance group, i.e. all instances are in their target version. Instances' target version are specified by version field on Instance Group Manager.
+ },
+ "autoscaler": "A String", # [Output Only] The URL of the Autoscaler that targets this instance group manager.
},
"currentActions": { # [Output Only] The list of instance actions and the number of instances in this managed instance group that are scheduled for each of those actions.
"none": 42, # [Output Only] The number of instances in the managed instance group that are running and have no scheduled actions.
@@ -1154,7 +1485,7 @@
"initialDelaySec": 42, # The number of seconds that the managed instance group waits before it applies autohealing policies to new instances or recently recreated instances. This initial delay allows instances to initialize and run their startup scripts before the instance group determines that they are UNHEALTHY. This prevents the managed instance group from recreating its instances prematurely. This value must be from range [0, 3600].
},
],
- "targetSize": 42, # The target number of running instances for this managed instance group. Deleting or abandoning instances reduces this number. Resizing the group changes this number.
+ "targetSize": 42, # The target number of running instances for this managed instance group. You can reduce this number by using the instanceGroupManager deleteInstances or abandonInstances methods. Resizing the group also changes this number.
"region": "A String", # [Output Only] The URL of the region where the managed instance group resides (for regional resources).
"instanceGroup": "A String", # [Output Only] The URL of the Instance Group resource.
"kind": "compute#instanceGroupManager", # [Output Only] The resource type, which is always compute#instanceGroupManager for managed instance groups.
@@ -1170,7 +1501,7 @@
],
"baseInstanceName": "A String", # The base instance name to use for instances in this group. The value must be 1-58 characters long. Instances are named by appending a hyphen and a random four-character string to the base instance name. The base instance name must comply with RFC1035.
"updatePolicy": { # The update policy for this managed instance group.
- "type": "A String", # The type of update process. You can specify either PROACTIVE so that the instance group manager proactively executes actions in order to bring instances to their target versions or OPPORTUNISTIC so that no action is proactively executed but the update will be performed as part of other actions (for example, resizes or recreateInstances calls).
+ "replacementMethod": "A String", # What action should be used to replace instances. See minimal_action.REPLACE
"maxSurge": { # Encapsulates numeric value that can be either absolute or relative. # The maximum number of instances that can be created above the specified targetSize during the update process. By default, a fixed value of 1 is used. This value can be either a fixed number or a percentage if the instance group has 10 or more instances. If you set a percentage, the number of instances will be rounded up if necessary.
#
# At least one of either maxSurge or maxUnavailable must be greater than 0. Learn more about maxSurge.
@@ -1183,6 +1514,9 @@
"percent": 42, # Specifies a percentage of instances between 0 to 100%, inclusive. For example, specify 80 for 80%.
},
"minimalAction": "A String", # Minimal action to be taken on an instance. You can specify either RESTART to restart existing instances or REPLACE to delete and create new instances from the target template. If you specify a RESTART, the Updater will attempt to perform that action only. However, if the Updater determines that the minimal action you specify is not enough to perform the update, it might perform a more disruptive action.
+ "instanceRedistributionType": "A String", # The instance redistribution policy for regional managed instance groups. Valid values are:
+ # - PROACTIVE (default): The group attempts to maintain an even distribution of VM instances across zones in the region.
+ # - NONE: For non-autoscaled groups, proactive redistribution is disabled.
"maxUnavailable": { # Encapsulates numeric value that can be either absolute or relative. # The maximum number of instances that can be unavailable during the update process. An instance is considered available if all of the following conditions are satisfied:
#
#
@@ -1198,6 +1532,7 @@
"fixed": 42, # Specifies a fixed number of VM instances. This must be a positive integer.
"percent": 42, # Specifies a percentage of instances between 0 to 100%, inclusive. For example, specify 80 for 80%.
},
+ "type": "A String", # The type of update process. You can specify either PROACTIVE so that the instance group manager proactively executes actions in order to bring instances to their target versions or OPPORTUNISTIC so that no action is proactively executed but the update will be performed as part of other actions (for example, resizes or recreateInstances calls).
},
"fingerprint": "A String", # Fingerprint of this resource. This field may be used in optimistic locking. It will be ignored when inserting an InstanceGroupManager. An up-to-date fingerprint must be provided in order to update the InstanceGroupManager, otherwise the request will fail with error 412 conditionNotMet.
#
@@ -1226,26 +1561,30 @@
{ # Represents an Operation resource.
#
+ # Google Compute Engine has three Operation resources:
+ #
+ # * [Global](/compute/docs/reference/rest/{$api_version}/globalOperations) * [Regional](/compute/docs/reference/rest/{$api_version}/regionOperations) * [Zonal](/compute/docs/reference/rest/{$api_version}/zoneOperations)
+ #
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
- # - For global operations, use the globalOperations resource.
- # - For regional operations, use the regionOperations resource.
- # - For zonal operations, use the zonalOperations resource.
+ # - For global operations, use the `globalOperations` resource.
+ # - For regional operations, use the `regionOperations` resource.
+ # - For zonal operations, use the `zonalOperations` resource.
#
- # For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
+ # For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
- "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
+ "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
- "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
- "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
+ "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
+ "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
- "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
+ "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
- "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
+ "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
@@ -1260,10 +1599,10 @@
],
},
],
- "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
+ "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
- "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
- "name": "A String", # [Output Only] Name of the resource.
+ "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
@@ -1281,7 +1620,7 @@
</div>
<div class="method">
- <code class="details" id="recreateInstances">recreateInstances(project, zone, instanceGroupManager, body, requestId=None)</code>
+ <code class="details" id="recreateInstances">recreateInstances(project, zone, instanceGroupManager, body=None, requestId=None)</code>
<pre>Flags the specified instances in the managed instance group to be immediately recreated. The instances are deleted and recreated using the current instance template for the managed instance group. This operation is marked as DONE when the flag is set even if the instances have not yet been recreated. You must separately verify the status of the recreating action with the listmanagedinstances method.
If the group is part of a backend service that has enabled connection draining, it can take up to 60 seconds after the connection draining duration has elapsed before the VM instance is removed or deleted.
@@ -1292,7 +1631,7 @@
project: string, Project ID for this request. (required)
zone: string, The name of the zone where the managed instance group is located. (required)
instanceGroupManager: string, The name of the managed instance group. (required)
- body: object, The request body. (required)
+ body: object, The request body.
The object takes the form of:
{
@@ -1312,26 +1651,30 @@
{ # Represents an Operation resource.
#
+ # Google Compute Engine has three Operation resources:
+ #
+ # * [Global](/compute/docs/reference/rest/{$api_version}/globalOperations) * [Regional](/compute/docs/reference/rest/{$api_version}/regionOperations) * [Zonal](/compute/docs/reference/rest/{$api_version}/zoneOperations)
+ #
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
- # - For global operations, use the globalOperations resource.
- # - For regional operations, use the regionOperations resource.
- # - For zonal operations, use the zonalOperations resource.
+ # - For global operations, use the `globalOperations` resource.
+ # - For regional operations, use the `regionOperations` resource.
+ # - For zonal operations, use the `zonalOperations` resource.
#
- # For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
+ # For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
- "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
+ "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
- "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
- "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
+ "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
+ "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
- "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
+ "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
- "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
+ "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
@@ -1346,10 +1689,10 @@
],
},
],
- "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
+ "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
- "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
- "name": "A String", # [Output Only] Name of the resource.
+ "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
@@ -1394,26 +1737,30 @@
{ # Represents an Operation resource.
#
+ # Google Compute Engine has three Operation resources:
+ #
+ # * [Global](/compute/docs/reference/rest/{$api_version}/globalOperations) * [Regional](/compute/docs/reference/rest/{$api_version}/regionOperations) * [Zonal](/compute/docs/reference/rest/{$api_version}/zoneOperations)
+ #
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
- # - For global operations, use the globalOperations resource.
- # - For regional operations, use the regionOperations resource.
- # - For zonal operations, use the zonalOperations resource.
+ # - For global operations, use the `globalOperations` resource.
+ # - For regional operations, use the `regionOperations` resource.
+ # - For zonal operations, use the `zonalOperations` resource.
#
- # For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
+ # For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
- "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
+ "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
- "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
- "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
+ "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
+ "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
- "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
+ "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
- "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
+ "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
@@ -1428,10 +1775,10 @@
],
},
],
- "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
+ "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
- "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
- "name": "A String", # [Output Only] Name of the resource.
+ "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
@@ -1449,14 +1796,14 @@
</div>
<div class="method">
- <code class="details" id="setInstanceTemplate">setInstanceTemplate(project, zone, instanceGroupManager, body, requestId=None)</code>
+ <code class="details" id="setInstanceTemplate">setInstanceTemplate(project, zone, instanceGroupManager, body=None, requestId=None)</code>
<pre>Specifies the instance template to use when creating new instances in this group. The templates for existing instances in the group do not change unless you recreate them.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone where the managed instance group is located. (required)
instanceGroupManager: string, The name of the managed instance group. (required)
- body: object, The request body. (required)
+ body: object, The request body.
The object takes the form of:
{
@@ -1474,26 +1821,30 @@
{ # Represents an Operation resource.
#
+ # Google Compute Engine has three Operation resources:
+ #
+ # * [Global](/compute/docs/reference/rest/{$api_version}/globalOperations) * [Regional](/compute/docs/reference/rest/{$api_version}/regionOperations) * [Zonal](/compute/docs/reference/rest/{$api_version}/zoneOperations)
+ #
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
- # - For global operations, use the globalOperations resource.
- # - For regional operations, use the regionOperations resource.
- # - For zonal operations, use the zonalOperations resource.
+ # - For global operations, use the `globalOperations` resource.
+ # - For regional operations, use the `regionOperations` resource.
+ # - For zonal operations, use the `zonalOperations` resource.
#
- # For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
+ # For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
- "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
+ "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
- "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
- "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
+ "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
+ "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
- "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
+ "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
- "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
+ "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
@@ -1508,10 +1859,10 @@
],
},
],
- "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
+ "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
- "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
- "name": "A String", # [Output Only] Name of the resource.
+ "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
@@ -1529,14 +1880,14 @@
</div>
<div class="method">
- <code class="details" id="setTargetPools">setTargetPools(project, zone, instanceGroupManager, body, requestId=None)</code>
+ <code class="details" id="setTargetPools">setTargetPools(project, zone, instanceGroupManager, body=None, requestId=None)</code>
<pre>Modifies the target pools to which all instances in this managed instance group are assigned. The target pools automatically apply to all of the instances in the managed instance group. This operation is marked DONE when you make the request even if the instances have not yet been added to their target pools. The change might take some time to apply to all of the instances in the group depending on the size of the group.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone where the managed instance group is located. (required)
instanceGroupManager: string, The name of the managed instance group. (required)
- body: object, The request body. (required)
+ body: object, The request body.
The object takes the form of:
{
@@ -1557,26 +1908,30 @@
{ # Represents an Operation resource.
#
+ # Google Compute Engine has three Operation resources:
+ #
+ # * [Global](/compute/docs/reference/rest/{$api_version}/globalOperations) * [Regional](/compute/docs/reference/rest/{$api_version}/regionOperations) * [Zonal](/compute/docs/reference/rest/{$api_version}/zoneOperations)
+ #
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
- # - For global operations, use the globalOperations resource.
- # - For regional operations, use the regionOperations resource.
- # - For zonal operations, use the zonalOperations resource.
+ # - For global operations, use the `globalOperations` resource.
+ # - For regional operations, use the `regionOperations` resource.
+ # - For zonal operations, use the `zonalOperations` resource.
#
- # For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
+ # For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
- "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
+ "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
- "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
- "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
+ "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
+ "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
- "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
+ "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
- "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
+ "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
@@ -1591,10 +1946,10 @@
],
},
],
- "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
+ "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
- "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
- "name": "A String", # [Output Only] Name of the resource.
+ "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
+ "name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.