diff --git a/src/utils/SkPolyUtils.cpp b/src/utils/SkPolyUtils.cpp
index b76d270..0d1b71c 100644
--- a/src/utils/SkPolyUtils.cpp
+++ b/src/utils/SkPolyUtils.cpp
@@ -7,6 +7,7 @@
 
 #include "SkPolyUtils.h"
 
+#include <set>
 #include "SkPointPriv.h"
 #include "SkTArray.h"
 #include "SkTemplates.h"
@@ -298,34 +299,32 @@
     return true;
 }
 
-struct EdgeData {
+struct OffsetEdge {
+    OffsetEdge*   fPrev;
+    OffsetEdge*   fNext;
     OffsetSegment fInset;
     SkPoint       fIntersection;
     SkScalar      fTValue;
-    uint16_t      fStart;
     uint16_t      fEnd;
     uint16_t      fIndex;
-    bool          fValid;
 
-    void init() {
+    void init(uint16_t start = 0, uint16_t end = 0) {
         fIntersection = fInset.fP0;
         fTValue = SK_ScalarMin;
-        fStart = 0;
-        fEnd = 0;
-        fIndex = 0;
-        fValid = true;
-    }
-
-    void init(uint16_t start, uint16_t end) {
-        fIntersection = fInset.fP0;
-        fTValue = SK_ScalarMin;
-        fStart = start;
         fEnd = end;
         fIndex = start;
-        fValid = true;
     }
 };
 
+static void remove_node(const OffsetEdge* node, OffsetEdge** head) {
+    // remove from linked list
+    node->fPrev->fNext = node->fNext;
+    node->fNext->fPrev = node->fPrev;
+    if (node == *head) {
+        *head = (node->fNext == node) ? nullptr : node->fNext;
+    }
+}
+
 //////////////////////////////////////////////////////////////////////////////////
 
 // The objective here is to inset all of the edges by the given distance, and then
@@ -354,115 +353,117 @@
     }
 
     // set up
-    SkAutoSTMalloc<64, EdgeData> edgeData(inputPolygonSize);
-    for (int i = 0; i < inputPolygonSize; ++i) {
-        int j = (i + 1) % inputPolygonSize;
-        int k = (i + 2) % inputPolygonSize;
-        if (!inputPolygonVerts[i].isFinite()) {
+    SkAutoSTMalloc<64, OffsetEdge> edgeData(inputPolygonSize);
+    int prev = inputPolygonSize - 1;
+    for (int curr = 0; curr < inputPolygonSize; prev = curr, ++curr) {
+        int next = (curr + 1) % inputPolygonSize;
+        if (!inputPolygonVerts[curr].isFinite()) {
             return false;
         }
         // check for convexity just to be sure
-        if (compute_side(inputPolygonVerts[i], inputPolygonVerts[j],
-                         inputPolygonVerts[k])*winding < 0) {
+        if (compute_side(inputPolygonVerts[prev], inputPolygonVerts[curr],
+                         inputPolygonVerts[next])*winding < 0) {
             return false;
         }
-        if (!SkOffsetSegment(inputPolygonVerts[i], inputPolygonVerts[j],
-                             insetDistanceFunc(inputPolygonVerts[i]),
-                             insetDistanceFunc(inputPolygonVerts[j]),
+        edgeData[curr].fPrev = &edgeData[prev];
+        edgeData[curr].fNext = &edgeData[next];
+        if (!SkOffsetSegment(inputPolygonVerts[curr], inputPolygonVerts[next],
+                             insetDistanceFunc(inputPolygonVerts[curr]),
+                             insetDistanceFunc(inputPolygonVerts[next]),
                              winding,
-                             &edgeData[i].fInset.fP0, &edgeData[i].fInset.fP1)) {
+                             &edgeData[curr].fInset.fP0, &edgeData[curr].fInset.fP1)) {
             return false;
         }
-        edgeData[i].init();
+        edgeData[curr].init();
     }
 
-    int prevIndex = inputPolygonSize - 1;
-    int currIndex = 0;
+    OffsetEdge* head = &edgeData[0];
+    OffsetEdge* currEdge = head;
+    OffsetEdge* prevEdge = currEdge->fPrev;
     int insetVertexCount = inputPolygonSize;
     int iterations = 0;
-    while (prevIndex != currIndex) {
+    while (head && prevEdge != currEdge) {
         ++iterations;
         // we should check each edge against each other edge at most once
         if (iterations > inputPolygonSize*inputPolygonSize) {
             return false;
         }
 
-        if (!edgeData[prevIndex].fValid) {
-            prevIndex = (prevIndex + inputPolygonSize - 1) % inputPolygonSize;
-            continue;
-        }
-
         SkScalar s, t;
         SkPoint intersection;
-        if (compute_intersection(edgeData[prevIndex].fInset, edgeData[currIndex].fInset,
+        if (compute_intersection(prevEdge->fInset, currEdge->fInset,
                                  &intersection, &s, &t)) {
             // if new intersection is further back on previous inset from the prior intersection
-            if (s < edgeData[prevIndex].fTValue) {
+            if (s < prevEdge->fTValue) {
                 // no point in considering this one again
-                edgeData[prevIndex].fValid = false;
+                remove_node(prevEdge, &head);
                 --insetVertexCount;
                 // go back one segment
-                prevIndex = (prevIndex + inputPolygonSize - 1) % inputPolygonSize;
+                prevEdge = prevEdge->fPrev;
             // we've already considered this intersection, we're done
-            } else if (edgeData[currIndex].fTValue > SK_ScalarMin &&
+            } else if (currEdge->fTValue > SK_ScalarMin &&
                        SkPointPriv::EqualsWithinTolerance(intersection,
-                                                          edgeData[currIndex].fIntersection,
+                                                          currEdge->fIntersection,
                                                           1.0e-6f)) {
                 break;
             } else {
                 // add intersection
-                edgeData[currIndex].fIntersection = intersection;
-                edgeData[currIndex].fTValue = t;
+                currEdge->fIntersection = intersection;
+                currEdge->fTValue = t;
 
                 // go to next segment
-                prevIndex = currIndex;
-                currIndex = (currIndex + 1) % inputPolygonSize;
+                prevEdge = currEdge;
+                currEdge = currEdge->fNext;
             }
         } else {
             // if prev to right side of curr
-            int side = winding*compute_side(edgeData[currIndex].fInset.fP0,
-                                            edgeData[currIndex].fInset.fP1,
-                                            edgeData[prevIndex].fInset.fP1);
-            if (side < 0 && side == winding*compute_side(edgeData[currIndex].fInset.fP0,
-                                                         edgeData[currIndex].fInset.fP1,
-                                                         edgeData[prevIndex].fInset.fP0)) {
+            int side = winding*compute_side(currEdge->fInset.fP0,
+                                            currEdge->fInset.fP1,
+                                            prevEdge->fInset.fP1);
+            if (side < 0 && side == winding*compute_side(currEdge->fInset.fP0,
+                                                         currEdge->fInset.fP1,
+                                                         prevEdge->fInset.fP0)) {
                 // no point in considering this one again
-                edgeData[prevIndex].fValid = false;
+                remove_node(prevEdge, &head);
                 --insetVertexCount;
                 // go back one segment
-                prevIndex = (prevIndex + inputPolygonSize - 1) % inputPolygonSize;
+                prevEdge = prevEdge->fPrev;
             } else {
                 // move to next segment
-                edgeData[currIndex].fValid = false;
+                remove_node(currEdge, &head);
                 --insetVertexCount;
-                currIndex = (currIndex + 1) % inputPolygonSize;
+                currEdge = currEdge->fNext;
             }
         }
     }
 
     // store all the valid intersections that aren't nearly coincident
     // TODO: look at the main algorithm and see if we can detect these better
-    static constexpr SkScalar kCleanupTolerance = 0.01f;
-
     insetPolygon->reset();
-    if (insetVertexCount >= 0) {
-        insetPolygon->setReserve(insetVertexCount);
-    }
-    currIndex = -1;
-    for (int i = 0; i < inputPolygonSize; ++i) {
-        if (edgeData[i].fValid && (currIndex == -1 ||
-            !SkPointPriv::EqualsWithinTolerance(edgeData[i].fIntersection,
-                                                (*insetPolygon)[currIndex],
-                                                kCleanupTolerance))) {
-            *insetPolygon->push() = edgeData[i].fIntersection;
-            currIndex++;
+    if (head) {
+        static constexpr SkScalar kCleanupTolerance = 0.01f;
+        if (insetVertexCount >= 0) {
+            insetPolygon->setReserve(insetVertexCount);
         }
-    }
-    // make sure the first and last points aren't coincident
-    if (currIndex >= 1 &&
-       SkPointPriv::EqualsWithinTolerance((*insetPolygon)[0], (*insetPolygon)[currIndex],
-                                          kCleanupTolerance)) {
-        insetPolygon->pop();
+        int currIndex = 0;
+        OffsetEdge* currEdge = head;
+        *insetPolygon->push() = currEdge->fIntersection;
+        currEdge = currEdge->fNext;
+        while (currEdge != head) {
+            if (!SkPointPriv::EqualsWithinTolerance(currEdge->fIntersection,
+                                                    (*insetPolygon)[currIndex],
+                                                    kCleanupTolerance)) {
+                *insetPolygon->push() = currEdge->fIntersection;
+                currIndex++;
+            }
+            currEdge = currEdge->fNext;
+        }
+        // make sure the first and last points aren't coincident
+        if (currIndex >= 1 &&
+           SkPointPriv::EqualsWithinTolerance((*insetPolygon)[0], (*insetPolygon)[currIndex],
+                                              kCleanupTolerance)) {
+            insetPolygon->pop();
+        }
     }
 
     return SkIsConvexPolygon(insetPolygon->begin(), insetPolygon->count());
@@ -504,6 +505,7 @@
     static bool Left(const Vertex& qv0, const Vertex& qv1) {
         return left(qv0.fPosition, qv1.fPosition);
     }
+
     // packed to fit into 16 bytes (one cache line)
     SkPoint  fPosition;
     uint16_t fIndex;       // index in unsorted polygon
@@ -517,30 +519,60 @@
     kNextLeft_VertexFlag = 0x2,
 };
 
-struct Edge {
+struct ActiveEdge {
+    ActiveEdge(const SkPoint& p0, const SkPoint& p1, int32_t index0, int32_t index1)
+        : fSegment({p0, p1})
+        , fIndex0(index0)
+        , fIndex1(index1) {}
+
     // returns true if "this" is above "that"
-    bool above(const Edge& that, SkScalar tolerance = SK_ScalarNearlyZero) {
-        SkASSERT(this->fSegment.fP0.fX < that.fSegment.fP0.fX ||
-                 SkScalarNearlyEqual(this->fSegment.fP0.fX, that.fSegment.fP0.fX, tolerance));
+    bool above(const ActiveEdge& that) const {
+        SkASSERT(this->fSegment.fP0.fX <= that.fSegment.fP0.fX);
+        const SkScalar kTolerance = SK_ScalarNearlyZero * SK_ScalarNearlyZero;
+        SkVector u = this->fSegment.fP1 - this->fSegment.fP0;
         // The idea here is that if the vector between the origins of the two segments (dv)
         // rotates counterclockwise up to the vector representing the "this" segment (u),
         // then we know that "this" is above that. If the result is clockwise we say it's below.
-        SkVector dv = that.fSegment.fP0 - this->fSegment.fP0;
-        SkVector u = this->fSegment.fP1 - this->fSegment.fP0;
-        SkScalar cross = dv.cross(u);
-        if (cross > tolerance) {
-            return true;
-        } else if (cross < -tolerance) {
+        if (this->fIndex0 != that.fIndex0) {
+            SkVector dv = that.fSegment.fP0 - this->fSegment.fP0;
+            SkScalar cross = dv.cross(u);
+            if (cross > kTolerance) {
+                return true;
+            } else if (cross < -kTolerance) {
+                return false;
+            }
+        } else if (this->fIndex1 == that.fIndex1) {
+            // they're the same edge
             return false;
         }
-        // If the result is 0 then either the two origins are equal or the origin of "that"
+        // At this point either the two origins are nearly equal or the origin of "that"
         // lies on dv. So then we try the same for the vector from the tail of "this"
         // to the head of "that". Again, ccw means "this" is above "that".
-        dv = that.fSegment.fP1 - this->fSegment.fP0;
-        return (dv.cross(u) > tolerance);
+        SkVector dv = that.fSegment.fP1 - this->fSegment.fP0;
+        SkScalar cross = dv.cross(u);
+        if (cross > kTolerance) {
+            return true;
+        } else if (cross < -kTolerance) {
+            return false;
+        }
+        // If the previous check fails, the two segments are nearly collinear
+        // First check y-coord of first endpoints
+        if (this->fSegment.fP0.fX < that.fSegment.fP0.fX) {
+            return (this->fSegment.fP0.fY >= that.fSegment.fP0.fY);
+        } else if (this->fSegment.fP0.fY > that.fSegment.fP0.fY) {
+            return true;
+        } else if (this->fSegment.fP0.fY < that.fSegment.fP0.fY) {
+            return false;
+        }
+        // The first endpoints are the same, so check the other endpoint
+        if (this->fSegment.fP1.fX < that.fSegment.fP1.fX) {
+            return (this->fSegment.fP1.fY >= that.fSegment.fP1.fY);
+        } else {
+            return (this->fSegment.fP1.fY > that.fSegment.fP1.fY);
+        }
     }
 
-    bool intersect(const Edge& that) const {
+    bool intersect(const ActiveEdge& that) const {
         SkPoint intersection;
         SkScalar s, t;
         // check first to see if these edges are neighbors in the polygon
@@ -551,78 +583,78 @@
         return compute_intersection(this->fSegment, that.fSegment, &intersection, &s, &t);
     }
 
-    bool operator==(const Edge& that) const {
+    bool operator==(const ActiveEdge& that) const {
         return (this->fIndex0 == that.fIndex0 && this->fIndex1 == that.fIndex1);
     }
 
-    bool operator!=(const Edge& that) const {
+    bool operator!=(const ActiveEdge& that) const {
         return !operator==(that);
     }
 
+    bool lessThan(const ActiveEdge& that) const {
+        if (this->fSegment.fP0.fX > that.fSegment.fP0.fX ||
+            (this->fSegment.fP0.fX == that.fSegment.fP0.fX &&
+             this->fSegment.fP0.fY < that.fSegment.fP0.fY)) {
+            return !that.above(*this);
+        }
+        return this->above(that);
+    }
+
+    bool operator<(const ActiveEdge& that) const {
+        SkASSERT(!this->lessThan(*this));
+        SkASSERT(!that.lessThan(that));
+        SkASSERT(!(this->lessThan(that) && that.lessThan(*this)));
+        return this->lessThan(that);
+    }
+
     OffsetSegment fSegment;
     int32_t fIndex0;   // indices for previous and next vertex
     int32_t fIndex1;
 };
 
-class EdgeList {
+class ActiveEdgeList {
 public:
-    void reserve(int count) { fEdges.reserve(count); }
+    void reserve(int count) { }
 
-    bool insert(const Edge& newEdge) {
-        // linear search for now (expected case is very few active edges)
-        int insertIndex = 0;
-        while (insertIndex < fEdges.count() && fEdges[insertIndex].above(newEdge)) {
-            ++insertIndex;
-        }
-        // if we intersect with the existing edge above or below us
-        // then we know this polygon is not simple, so don't insert, just fail
-        if (insertIndex > 0 && newEdge.intersect(fEdges[insertIndex - 1])) {
-            return false;
-        }
-        if (insertIndex < fEdges.count() && newEdge.intersect(fEdges[insertIndex])) {
+    bool insert(const SkPoint& p0, const SkPoint& p1, int32_t index0, int32_t index1) {
+        std::pair<Iterator, bool> result = fEdgeTree.emplace(p0, p1, index0, index1);
+        if (!result.second) {
             return false;
         }
 
-        fEdges.push_back();
-        for (int i = fEdges.count() - 1; i > insertIndex; --i) {
-            fEdges[i] = fEdges[i - 1];
+        Iterator& curr = result.first;
+        if (curr != fEdgeTree.begin() && curr->intersect(*std::prev(curr))) {
+            return false;
         }
-        fEdges[insertIndex] = newEdge;
+        Iterator next = std::next(curr);
+        if (next != fEdgeTree.end() && curr->intersect(*next)) {
+            return false;
+        }
 
         return true;
     }
 
-    bool remove(const Edge& edge) {
-        SkASSERT(fEdges.count() > 0);
-
-        // linear search for now (expected case is very few active edges)
-        int removeIndex = 0;
-        while (removeIndex < fEdges.count() && fEdges[removeIndex] != edge) {
-            ++removeIndex;
-        }
-        // we'd better find it or something is wrong
-        SkASSERT(removeIndex < fEdges.count());
-
-        // if we intersect with the edge above or below us
-        // then we know this polygon is not simple, so don't remove, just fail
-        if (removeIndex > 0 && fEdges[removeIndex].intersect(fEdges[removeIndex - 1])) {
+    bool remove(const ActiveEdge& edge) {
+        auto element = fEdgeTree.find(edge);
+        // this better not happen
+        if (element == fEdgeTree.end()) {
             return false;
         }
-        if (removeIndex < fEdges.count() - 1) {
-            if (fEdges[removeIndex].intersect(fEdges[removeIndex + 1])) {
-                return false;
-            }
-            // copy over the old entry
-            memmove(&fEdges[removeIndex], &fEdges[removeIndex + 1],
-                    sizeof(Edge)*(fEdges.count() - removeIndex - 1));
+        if (element != fEdgeTree.begin() && element->intersect(*std::prev(element))) {
+            return false;
+        }
+        Iterator next = std::next(element);
+        if (next != fEdgeTree.end() && element->intersect(*next)) {
+            return false;
         }
 
-        fEdges.pop_back();
+        fEdgeTree.erase(element);
         return true;
     }
 
 private:
-    SkSTArray<1, Edge> fEdges;
+    std::set<ActiveEdge> fEdgeTree;
+    typedef std::set<ActiveEdge>::iterator Iterator;
 };
 
 // Here we implement a sweep line algorithm to determine whether the provided points
@@ -636,10 +668,7 @@
         return false;
     }
 
-    SkTDPQueue <Vertex, Vertex::Left> vertexQueue;
-    EdgeList sweepLine;
-
-    sweepLine.reserve(polygonSize);
+    SkTDPQueue <Vertex, Vertex::Left> vertexQueue(polygonSize);
     for (int i = 0; i < polygonSize; ++i) {
         Vertex newVertex;
         if (!polygon[i].isFinite()) {
@@ -661,31 +690,31 @@
 
     // pop each vertex from the queue and generate events depending on
     // where it lies relative to its neighboring edges
+    ActiveEdgeList sweepLine;
+    sweepLine.reserve(polygonSize);
     while (vertexQueue.count() > 0) {
         const Vertex& v = vertexQueue.peek();
 
         // check edge to previous vertex
         if (v.fFlags & kPrevLeft_VertexFlag) {
-            Edge edge{ { polygon[v.fPrevIndex], v.fPosition }, v.fPrevIndex, v.fIndex };
+            ActiveEdge edge(polygon[v.fPrevIndex], v.fPosition, v.fPrevIndex, v.fIndex);
             if (!sweepLine.remove(edge)) {
                 break;
             }
         } else {
-            Edge edge{ { v.fPosition, polygon[v.fPrevIndex] }, v.fIndex, v.fPrevIndex };
-            if (!sweepLine.insert(edge)) {
+            if (!sweepLine.insert(v.fPosition, polygon[v.fPrevIndex], v.fIndex, v.fPrevIndex)) {
                 break;
             }
         }
 
         // check edge to next vertex
         if (v.fFlags & kNextLeft_VertexFlag) {
-            Edge edge{ { polygon[v.fNextIndex], v.fPosition }, v.fNextIndex, v.fIndex };
+            ActiveEdge edge(polygon[v.fNextIndex], v.fPosition, v.fNextIndex, v.fIndex);
             if (!sweepLine.remove(edge)) {
                 break;
             }
         } else {
-            Edge edge{ { v.fPosition, polygon[v.fNextIndex] }, v.fIndex, v.fNextIndex };
-            if (!sweepLine.insert(edge)) {
+            if (!sweepLine.insert(v.fPosition, polygon[v.fNextIndex], v.fIndex, v.fNextIndex)) {
                 break;
             }
         }
@@ -698,6 +727,15 @@
 
 ///////////////////////////////////////////////////////////////////////////////////////////
 
+// helper function for SkOffsetSimplePolygon
+static void setup_offset_edge(OffsetEdge* currEdge,
+                              const SkPoint& endpoint0, const SkPoint& endpoint1,
+                              int startIndex, int endIndex) {
+    currEdge->fInset.fP0 = endpoint0;
+    currEdge->fInset.fP1 = endpoint1;
+    currEdge->init(startIndex, endIndex);
+}
+
 bool SkOffsetSimplePolygon(const SkPoint* inputPolygonVerts, int inputPolygonSize,
                            std::function<SkScalar(const SkPoint&)> offsetDistanceFunc,
                            SkTDArray<SkPoint>* offsetPolygon, SkTDArray<int>* polygonIndices) {
@@ -736,7 +774,7 @@
     }
 
     // build initial offset edge list
-    SkSTArray<64, EdgeData> edgeData(inputPolygonSize);
+    SkSTArray<64, OffsetEdge> edgeData(inputPolygonSize);
     int prevIndex = inputPolygonSize - 1;
     int currIndex = 0;
     int nextIndex = 1;
@@ -754,126 +792,143 @@
                                       &rotSin, &rotCos, &numSteps)) {
                 return false;
             }
+            auto currEdge = edgeData.push_back_n(SkTMax(numSteps, 1));
             for (int i = 0; i < numSteps - 1; ++i) {
                 SkVector currNormal = SkVector::Make(prevNormal.fX*rotCos - prevNormal.fY*rotSin,
                                                      prevNormal.fY*rotCos + prevNormal.fX*rotSin);
-                EdgeData& edge = edgeData.push_back();
-                edge.fInset.fP0 = inputPolygonVerts[currIndex] + prevNormal;
-                edge.fInset.fP1 = inputPolygonVerts[currIndex] + currNormal;
-                edge.init(currIndex, currIndex);
+                setup_offset_edge(currEdge,
+                                  inputPolygonVerts[currIndex] + prevNormal,
+                                  inputPolygonVerts[currIndex] + currNormal,
+                                  currIndex, currIndex);
                 prevNormal = currNormal;
+                ++currEdge;
             }
-            EdgeData& edge = edgeData.push_back();
-            edge.fInset.fP0 = inputPolygonVerts[currIndex] + prevNormal;
-            edge.fInset.fP1 = inputPolygonVerts[currIndex] + normal0[currIndex];
-            edge.init(currIndex, currIndex);
+            setup_offset_edge(currEdge,
+                              inputPolygonVerts[currIndex] + prevNormal,
+                              inputPolygonVerts[currIndex] + normal0[currIndex],
+                              currIndex, currIndex);
+            ++currEdge;
+
         }
 
         // Add the edge
-        EdgeData& edge = edgeData.push_back();
-        edge.fInset.fP0 = inputPolygonVerts[currIndex] + normal0[currIndex];
-        edge.fInset.fP1 = inputPolygonVerts[nextIndex] + normal1[nextIndex];
-        edge.init(currIndex, nextIndex);
+        auto edge = edgeData.push_back_n(1);
+        setup_offset_edge(edge,
+                          inputPolygonVerts[currIndex] + normal0[currIndex],
+                          inputPolygonVerts[nextIndex] + normal1[nextIndex],
+                          currIndex, nextIndex);
 
         prevIndex = currIndex;
         currIndex++;
         nextIndex = (nextIndex + 1) % inputPolygonSize;
     }
 
+    // build linked list
+    // we have to do this as a post-process step because we might have reallocated
+    // the array when adding fans for reflex verts
+    prevIndex = edgeData.count()-1;
+    for (int currIndex = 0; currIndex < edgeData.count(); prevIndex = currIndex, ++currIndex) {
+        int nextIndex = (currIndex + 1) % edgeData.count();
+        edgeData[currIndex].fPrev = &edgeData[prevIndex];
+        edgeData[currIndex].fNext = &edgeData[nextIndex];
+    }
+
+    // now clip edges
     int edgeDataSize = edgeData.count();
-    prevIndex = edgeDataSize - 1;
-    currIndex = 0;
-    int insetVertexCount = edgeDataSize;
+    auto head = &edgeData[0];
+    auto currEdge = head;
+    auto prevEdge = currEdge->fPrev;
+    int offsetVertexCount = edgeDataSize;
     int iterations = 0;
-    while (prevIndex != currIndex) {
+    while (head && prevEdge != currEdge) {
         ++iterations;
         // we should check each edge against each other edge at most once
         if (iterations > edgeDataSize*edgeDataSize) {
             return false;
         }
 
-        if (!edgeData[prevIndex].fValid) {
-            prevIndex = (prevIndex + edgeDataSize - 1) % edgeDataSize;
-            continue;
-        }
-        if (!edgeData[currIndex].fValid) {
-            currIndex = (currIndex + 1) % edgeDataSize;
-            continue;
-        }
-
         SkScalar s, t;
         SkPoint intersection;
-        if (compute_intersection(edgeData[prevIndex].fInset, edgeData[currIndex].fInset,
+        if (compute_intersection(prevEdge->fInset, currEdge->fInset,
                                  &intersection, &s, &t)) {
             // if new intersection is further back on previous inset from the prior intersection
-            if (s < edgeData[prevIndex].fTValue) {
+            if (s < prevEdge->fTValue) {
                 // no point in considering this one again
-                edgeData[prevIndex].fValid = false;
-                --insetVertexCount;
+                remove_node(prevEdge, &head);
+                --offsetVertexCount;
                 // go back one segment
-                prevIndex = (prevIndex + edgeDataSize - 1) % edgeDataSize;
+                prevEdge = prevEdge->fPrev;
                 // we've already considered this intersection, we're done
-            } else if (edgeData[currIndex].fTValue > SK_ScalarMin &&
+            } else if (currEdge->fTValue > SK_ScalarMin &&
                        SkPointPriv::EqualsWithinTolerance(intersection,
-                                                          edgeData[currIndex].fIntersection,
+                                                          currEdge->fIntersection,
                                                           1.0e-6f)) {
                 break;
             } else {
                 // add intersection
-                edgeData[currIndex].fIntersection = intersection;
-                edgeData[currIndex].fTValue = t;
-                edgeData[currIndex].fIndex = edgeData[prevIndex].fEnd;
+                currEdge->fIntersection = intersection;
+                currEdge->fTValue = t;
+                currEdge->fIndex = prevEdge->fEnd;
 
                 // go to next segment
-                prevIndex = currIndex;
-                currIndex = (currIndex + 1) % edgeDataSize;
+                prevEdge = currEdge;
+                currEdge = currEdge->fNext;
             }
         } else {
             // If there is no intersection, we want to minimize the distance between
             // the point where the segment lines cross and the segments themselves.
-            SkScalar prevPrevIndex = (prevIndex + edgeDataSize - 1) % edgeDataSize;
-            SkScalar currNextIndex = (currIndex + 1) % edgeDataSize;
-            SkScalar dist0 = compute_crossing_distance(edgeData[currIndex].fInset,
-                                                       edgeData[prevPrevIndex].fInset);
-            SkScalar dist1 = compute_crossing_distance(edgeData[prevIndex].fInset,
-                                                       edgeData[currNextIndex].fInset);
+            OffsetEdge* prevPrevEdge = prevEdge->fPrev;
+            OffsetEdge* currNextEdge = currEdge->fNext;
+            SkScalar dist0 = compute_crossing_distance(currEdge->fInset,
+                                                       prevPrevEdge->fInset);
+            SkScalar dist1 = compute_crossing_distance(prevEdge->fInset,
+                                                       currNextEdge->fInset);
             if (dist0 < dist1) {
-                edgeData[prevIndex].fValid = false;
-                prevIndex = prevPrevIndex;
+                remove_node(prevEdge, &head);
+                prevEdge = prevPrevEdge;
             } else {
-                edgeData[currIndex].fValid = false;
-                currIndex = currNextIndex;
+                remove_node(currEdge, &head);
+                currEdge = currNextEdge;
             }
-            --insetVertexCount;
+            --offsetVertexCount;
         }
     }
 
     // store all the valid intersections that aren't nearly coincident
     // TODO: look at the main algorithm and see if we can detect these better
-    static constexpr SkScalar kCleanupTolerance = 0.01f;
-
     offsetPolygon->reset();
-    offsetPolygon->setReserve(insetVertexCount);
-    currIndex = -1;
-    for (int i = 0; i < edgeData.count(); ++i) {
-        if (edgeData[i].fValid && (currIndex == -1 ||
-                                   !SkPointPriv::EqualsWithinTolerance(edgeData[i].fIntersection,
-                                                                       (*offsetPolygon)[currIndex],
-                                                                       kCleanupTolerance))) {
-            *offsetPolygon->push() = edgeData[i].fIntersection;
-            if (polygonIndices) {
-                *polygonIndices->push() = edgeData[i].fIndex;
-            }
-            currIndex++;
+    if (head) {
+        static constexpr SkScalar kCleanupTolerance = 0.01f;
+        if (offsetVertexCount >= 0) {
+            offsetPolygon->setReserve(offsetVertexCount);
         }
-    }
-    // make sure the first and last points aren't coincident
-    if (currIndex >= 1 &&
-        SkPointPriv::EqualsWithinTolerance((*offsetPolygon)[0], (*offsetPolygon)[currIndex],
-                                           kCleanupTolerance)) {
-        offsetPolygon->pop();
+        int currIndex = 0;
+        OffsetEdge* currEdge = head;
+        *offsetPolygon->push() = currEdge->fIntersection;
         if (polygonIndices) {
-            polygonIndices->pop();
+            *polygonIndices->push() = currEdge->fIndex;
+        }
+        currEdge = currEdge->fNext;
+        while (currEdge != head) {
+            if (!SkPointPriv::EqualsWithinTolerance(currEdge->fIntersection,
+                                                    (*offsetPolygon)[currIndex],
+                                                    kCleanupTolerance)) {
+                *offsetPolygon->push() = currEdge->fIntersection;
+                if (polygonIndices) {
+                    *polygonIndices->push() = currEdge->fIndex;
+                }
+                currIndex++;
+            }
+            currEdge = currEdge->fNext;
+        }
+        // make sure the first and last points aren't coincident
+        if (currIndex >= 1 &&
+            SkPointPriv::EqualsWithinTolerance((*offsetPolygon)[0], (*offsetPolygon)[currIndex],
+                                               kCleanupTolerance)) {
+            offsetPolygon->pop();
+            if (polygonIndices) {
+                polygonIndices->pop();
+            }
         }
     }