| #include "EdgeWalker_Test.h" |
| #include "Intersection_Tests.h" |
| #include "SkBitmap.h" |
| |
| static SkBitmap bitmap; |
| |
| static void testSimplifyCoincidentInner() { |
| SkPath path, out; |
| path.setFillType(SkPath::kWinding_FillType); |
| path.addRect(10, 10, 60, 60, SkPath::kCCW_Direction); |
| path.addRect(20, 20, 50, 50, SkPath::kCW_Direction); |
| path.addRect(20, 30, 40, 40, SkPath::kCW_Direction); |
| testSimplify(path, true, out, bitmap); |
| } |
| |
| static void testSimplifyCoincidentVertical() { |
| SkPath path, out; |
| path.setFillType(SkPath::kWinding_FillType); |
| path.addRect(10, 10, 30, 30); |
| path.addRect(10, 30, 30, 40); |
| simplify(path, true, out); |
| SkRect rect; |
| if (!out.isRect(&rect)) { |
| SkDebugf("%s expected rect\n", __FUNCTION__); |
| } |
| if (rect != SkRect::MakeLTRB(10, 10, 30, 40)) { |
| SkDebugf("%s expected union\n", __FUNCTION__); |
| } |
| } |
| |
| static void testSimplifyCoincidentHorizontal() { |
| SkPath path, out; |
| path.setFillType(SkPath::kWinding_FillType); |
| path.addRect(10, 10, 30, 30); |
| path.addRect(30, 10, 40, 30); |
| simplify(path, true, out); |
| SkRect rect; |
| if (!out.isRect(&rect)) { |
| SkDebugf("%s expected rect\n", __FUNCTION__); |
| } |
| if (rect != SkRect::MakeLTRB(10, 10, 40, 30)) { |
| SkDebugf("%s expected union\n", __FUNCTION__); |
| } |
| } |
| |
| static void testSimplifyMulti() { |
| SkPath path, out; |
| path.setFillType(SkPath::kWinding_FillType); |
| path.addRect(10, 10, 30, 30); |
| path.addRect(20, 20, 40, 40); |
| simplify(path, true, out); |
| SkPath expected; |
| expected.setFillType(SkPath::kEvenOdd_FillType); |
| expected.moveTo(10,10); // two cutout corners |
| expected.lineTo(10,30); |
| expected.lineTo(20,30); |
| expected.lineTo(20,40); |
| expected.lineTo(40,40); |
| expected.lineTo(40,20); |
| expected.lineTo(30,20); |
| expected.lineTo(30,10); |
| expected.lineTo(10,10); |
| expected.close(); |
| if (out != expected) { |
| SkDebugf("%s expected equal\n", __FUNCTION__); |
| } |
| |
| path = out; |
| path.addRect(30, 10, 40, 20); |
| path.addRect(10, 30, 20, 40); |
| simplify(path, true, out); |
| SkRect rect; |
| if (!out.isRect(&rect)) { |
| SkDebugf("%s expected rect\n", __FUNCTION__); |
| } |
| if (rect != SkRect::MakeLTRB(10, 10, 40, 40)) { |
| SkDebugf("%s expected union\n", __FUNCTION__); |
| } |
| |
| path = out; |
| path.addRect(10, 10, 40, 40, SkPath::kCCW_Direction); |
| simplify(path, true, out); |
| if (!out.isEmpty()) { |
| SkDebugf("%s expected empty\n", __FUNCTION__); |
| } |
| } |
| |
| static void testSimplifyAddL() { |
| SkPath path, out; |
| path.moveTo(10,10); // 'L' shape |
| path.lineTo(10,40); |
| path.lineTo(40,40); |
| path.lineTo(40,20); |
| path.lineTo(30,20); |
| path.lineTo(30,10); |
| path.lineTo(10,10); |
| path.close(); |
| path.addRect(30, 10, 40, 20); // missing notch of 'L' |
| simplify(path, true, out); |
| SkRect rect; |
| if (!out.isRect(&rect)) { |
| SkDebugf("%s expected rect\n", __FUNCTION__); |
| } |
| if (rect != SkRect::MakeLTRB(10, 10, 40, 40)) { |
| SkDebugf("%s expected union\n", __FUNCTION__); |
| } |
| } |
| |
| static void testSimplifyCoincidentCCW() { |
| SkPath path, out; |
| path.addRect(10, 10, 40, 40, SkPath::kCCW_Direction); |
| path.addRect(10, 10, 40, 40, SkPath::kCCW_Direction); |
| simplify(path, true, out); |
| SkRect rect; |
| if (!out.isRect(&rect)) { |
| SkDebugf("%s expected rect\n", __FUNCTION__); |
| } |
| if (rect != SkRect::MakeLTRB(10, 10, 40, 40)) { |
| SkDebugf("%s expected union\n", __FUNCTION__); |
| } |
| } |
| |
| static void testSimplifyCoincidentCW() { |
| SkPath path, out; |
| path.addRect(10, 10, 40, 40, SkPath::kCCW_Direction); |
| path.addRect(10, 10, 40, 40, SkPath::kCW_Direction); |
| simplify(path, true, out); |
| if (!out.isEmpty()) { |
| SkDebugf("%s expected empty\n", __FUNCTION__); |
| } |
| } |
| |
| static void testSimplifyCorner() { |
| SkPath path, out; |
| path.addRect(10, 10, 20, 20, SkPath::kCCW_Direction); |
| path.addRect(20, 20, 40, 40, SkPath::kCW_Direction); |
| simplify(path, true, out); |
| SkTDArray<SkRect> boundsArray; |
| contourBounds(out, boundsArray); |
| if (boundsArray.count() != 2) { |
| SkDebugf("%s expected 2 contours\n", __FUNCTION__); |
| return; |
| } |
| SkRect one = SkRect::MakeLTRB(10, 10, 20, 20); |
| SkRect two = SkRect::MakeLTRB(20, 20, 40, 40); |
| if (boundsArray[0] != one && boundsArray[0] != two |
| || boundsArray[1] != one && boundsArray[1] != two) { |
| SkDebugf("%s expected match\n", __FUNCTION__); |
| } |
| } |
| |
| static void testSimplifyDiagonal() { |
| SkRect rect2 = SkRect::MakeXYWH(10, 10, 10, 10); |
| for (size_t outDir = SkPath::kCW_Direction; outDir <= SkPath::kCCW_Direction; ++outDir) { |
| for (size_t inDir = SkPath::kCW_Direction; inDir <= SkPath::kCCW_Direction; ++inDir) { |
| for (int x = 0; x <= 20; x += 20) { |
| for (int y = 0; y <= 20; y += 20) { |
| SkPath path, out; |
| SkRect rect1 = SkRect::MakeXYWH(x, y, 10, 10); |
| path.addRect(rect1, static_cast<SkPath::Direction>(outDir)); |
| path.addRect(rect2, static_cast<SkPath::Direction>(inDir)); |
| simplify(path, true, out); |
| SkPath::Iter iter(out, false); |
| SkPoint pts[4], lastLine[2]; |
| SkPath::Verb verb; |
| SkRect bounds[2]; |
| bounds[0].setEmpty(); |
| bounds[1].setEmpty(); |
| SkRect* boundsPtr = bounds; |
| int count = 0, segments = 0; |
| bool lastLineSet = false; |
| while ((verb = iter.next(pts)) != SkPath::kDone_Verb) { |
| switch (verb) { |
| case SkPath::kMove_Verb: |
| if (!boundsPtr->isEmpty()) { |
| SkASSERT(boundsPtr == bounds); |
| ++boundsPtr; |
| } |
| boundsPtr->set(pts[0].fX, pts[0].fY, pts[0].fX, pts[0].fY); |
| count = 0; |
| lastLineSet = false; |
| break; |
| case SkPath::kLine_Verb: |
| if (lastLineSet) { |
| SkASSERT((lastLine[1].fX - lastLine[0].fX) * |
| (pts[1].fY - lastLine[0].fY) != |
| (lastLine[1].fY - lastLine[0].fY) * |
| (pts[1].fX - lastLine[0].fX)); |
| } |
| lastLineSet = true; |
| lastLine[0] = pts[0]; |
| lastLine[1] = pts[1]; |
| count = 1; |
| ++segments; |
| break; |
| case SkPath::kClose_Verb: |
| count = 0; |
| break; |
| default: |
| SkDEBUGFAIL("bad verb"); |
| return; |
| } |
| for (int i = 1; i <= count; ++i) { |
| boundsPtr->growToInclude(pts[i].fX, pts[i].fY); |
| } |
| } |
| if (boundsPtr != bounds) { |
| SkASSERT((bounds[0] == rect1 || bounds[1] == rect1) |
| && (bounds[0] == rect2 || bounds[1] == rect2)); |
| } else { |
| SkASSERT(segments == 8); |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| static void assertOneContour(const SkPath& out, bool edge, bool extend) { |
| SkPath::Iter iter(out, false); |
| SkPoint pts[4]; |
| SkPath::Verb verb; |
| SkRect bounds; |
| bounds.setEmpty(); |
| int count = 0; |
| while ((verb = iter.next(pts)) != SkPath::kDone_Verb) { |
| switch (verb) { |
| case SkPath::kMove_Verb: |
| SkASSERT(count == 0); |
| break; |
| case SkPath::kLine_Verb: |
| SkASSERT(pts[0].fX == pts[1].fX || pts[0].fY == pts[1].fY); |
| ++count; |
| break; |
| case SkPath::kClose_Verb: |
| break; |
| default: |
| SkDEBUGFAIL("bad verb"); |
| return; |
| } |
| } |
| SkASSERT(count == (extend ? 4 : edge ? 6 : 8)); |
| } |
| |
| static void testSimplifyCoincident() { |
| // outside to inside, outside to right, outside to outside |
| // left to inside, left to right, left to outside |
| // inside to right, inside to outside |
| // repeat above for left, right, bottom |
| SkScalar start[] = { 0, 10, 20 }; |
| size_t startCount = sizeof(start) / sizeof(start[0]); |
| SkScalar stop[] = { 30, 40, 50 }; |
| size_t stopCount = sizeof(stop) / sizeof(stop[0]); |
| SkRect rect2 = SkRect::MakeXYWH(10, 10, 30, 30); |
| for (size_t outDir = SkPath::kCW_Direction; outDir <= SkPath::kCCW_Direction; ++outDir) { |
| for (size_t inDir = SkPath::kCW_Direction; inDir <= SkPath::kCCW_Direction; ++inDir) { |
| for (size_t startIndex = 0; startIndex < startCount; ++startIndex) { |
| for (size_t stopIndex = 0; stopIndex < stopCount; ++stopIndex) { |
| bool extend = start[startIndex] == rect2.fLeft && stop[stopIndex] == rect2.fRight; |
| bool edge = start[startIndex] == rect2.fLeft || stop[stopIndex] == rect2.fRight; |
| SkRect rect1 = SkRect::MakeLTRB(start[startIndex], 0, stop[stopIndex], 10); |
| SkPath path, out; |
| path.addRect(rect1, static_cast<SkPath::Direction>(outDir)); |
| path.addRect(rect2, static_cast<SkPath::Direction>(inDir)); |
| simplify(path, true, out); |
| assertOneContour(out, edge, extend); |
| |
| path.reset(); |
| rect1 = SkRect::MakeLTRB(start[startIndex], 40, stop[stopIndex], 50); |
| path.addRect(rect1, static_cast<SkPath::Direction>(outDir)); |
| path.addRect(rect2, static_cast<SkPath::Direction>(inDir)); |
| simplify(path, true, out); |
| assertOneContour(out, edge, extend); |
| |
| path.reset(); |
| rect1 = SkRect::MakeLTRB(0, start[startIndex], 10, stop[stopIndex]); |
| path.addRect(rect1, static_cast<SkPath::Direction>(outDir)); |
| path.addRect(rect2, static_cast<SkPath::Direction>(inDir)); |
| simplify(path, true, out); |
| assertOneContour(out, edge, extend); |
| |
| path.reset(); |
| rect1 = SkRect::MakeLTRB(40, start[startIndex], 50, stop[stopIndex]); |
| path.addRect(rect1, static_cast<SkPath::Direction>(outDir)); |
| path.addRect(rect2, static_cast<SkPath::Direction>(inDir)); |
| simplify(path, true, out); |
| assertOneContour(out, edge, extend); |
| } |
| } |
| } |
| } |
| } |
| |
| static void testSimplifyOverlap() { |
| SkScalar start[] = { 0, 10, 20 }; |
| size_t startCount = sizeof(start) / sizeof(start[0]); |
| SkScalar stop[] = { 30, 40, 50 }; |
| size_t stopCount = sizeof(stop) / sizeof(stop[0]); |
| SkRect rect2 = SkRect::MakeXYWH(10, 10, 30, 30); |
| for (size_t dir = SkPath::kCW_Direction; dir <= SkPath::kCCW_Direction; ++dir) { |
| for (size_t lefty = 0; lefty < startCount; ++lefty) { |
| for (size_t righty = 0; righty < stopCount; ++righty) { |
| for (size_t toppy = 0; toppy < startCount; ++toppy) { |
| for (size_t botty = 0; botty < stopCount; ++botty) { |
| SkRect rect1 = SkRect::MakeLTRB(start[lefty], start[toppy], |
| stop[righty], stop[botty]); |
| SkPath path, out; |
| path.addRect(rect1, static_cast<SkPath::Direction>(dir)); |
| path.addRect(rect2, static_cast<SkPath::Direction>(dir)); |
| testSimplify(path, true, out, bitmap); |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| static void testSimplifyOverlapTiny() { |
| SkScalar start[] = { 0, 1, 2 }; |
| size_t startCount = sizeof(start) / sizeof(start[0]); |
| SkScalar stop[] = { 3, 4, 5 }; |
| size_t stopCount = sizeof(stop) / sizeof(stop[0]); |
| SkRect rect2 = SkRect::MakeXYWH(1, 1, 3, 3); |
| for (size_t dir = SkPath::kCW_Direction; dir <= SkPath::kCCW_Direction; ++dir) { |
| for (size_t lefty = 0; lefty < startCount; ++lefty) { |
| for (size_t righty = 0; righty < stopCount; ++righty) { |
| for (size_t toppy = 0; toppy < startCount; ++toppy) { |
| for (size_t botty = 0; botty < stopCount; ++botty) { |
| SkRect rect1 = SkRect::MakeLTRB(start[lefty], start[toppy], |
| stop[righty], stop[botty]); |
| SkPath path, out; |
| path.addRect(rect1, static_cast<SkPath::Direction>(dir)); |
| path.addRect(rect2, static_cast<SkPath::Direction>(dir)); |
| simplify(path, true, out); |
| comparePathsTiny(path, out); |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| static void testSimplifyDegenerate() { |
| SkScalar start[] = { 0, 10, 20 }; |
| size_t startCount = sizeof(start) / sizeof(start[0]); |
| SkScalar stop[] = { 30, 40, 50 }; |
| size_t stopCount = sizeof(stop) / sizeof(stop[0]); |
| SkRect rect2 = SkRect::MakeXYWH(10, 10, 30, 30); |
| for (size_t outDir = SkPath::kCW_Direction; outDir <= SkPath::kCCW_Direction; ++outDir) { |
| for (size_t inDir = SkPath::kCW_Direction; inDir <= SkPath::kCCW_Direction; ++inDir) { |
| for (size_t startIndex = 0; startIndex < startCount; ++startIndex) { |
| for (size_t stopIndex = 0; stopIndex < stopCount; ++stopIndex) { |
| SkRect rect1 = SkRect::MakeLTRB(start[startIndex], 0, stop[stopIndex], 0); |
| SkPath path, out; |
| path.addRect(rect1, static_cast<SkPath::Direction>(outDir)); |
| path.addRect(rect2, static_cast<SkPath::Direction>(inDir)); |
| simplify(path, true, out); |
| SkRect rect; |
| if (!out.isRect(&rect)) { |
| SkDebugf("%s 1 expected rect\n", __FUNCTION__); |
| } |
| if (rect != rect2) { |
| SkDebugf("%s 1 expected union\n", __FUNCTION__); |
| } |
| |
| path.reset(); |
| rect1 = SkRect::MakeLTRB(start[startIndex], 40, stop[stopIndex], 40); |
| path.addRect(rect1, static_cast<SkPath::Direction>(outDir)); |
| path.addRect(rect2, static_cast<SkPath::Direction>(inDir)); |
| simplify(path, true, out); |
| if (!out.isRect(&rect)) { |
| SkDebugf("%s 2 expected rect\n", __FUNCTION__); |
| } |
| if (rect != rect2) { |
| SkDebugf("%s 2 expected union\n", __FUNCTION__); |
| } |
| |
| path.reset(); |
| rect1 = SkRect::MakeLTRB(0, start[startIndex], 0, stop[stopIndex]); |
| path.addRect(rect1, static_cast<SkPath::Direction>(outDir)); |
| path.addRect(rect2, static_cast<SkPath::Direction>(inDir)); |
| simplify(path, true, out); |
| if (!out.isRect(&rect)) { |
| SkDebugf("%s 3 expected rect\n", __FUNCTION__); |
| } |
| if (rect != rect2) { |
| SkDebugf("%s 3 expected union\n", __FUNCTION__); |
| } |
| |
| path.reset(); |
| rect1 = SkRect::MakeLTRB(40, start[startIndex], 40, stop[stopIndex]); |
| path.addRect(rect1, static_cast<SkPath::Direction>(outDir)); |
| path.addRect(rect2, static_cast<SkPath::Direction>(inDir)); |
| simplify(path, true, out); |
| if (!out.isRect(&rect)) { |
| SkDebugf("%s 4 expected rect\n", __FUNCTION__); |
| } |
| if (rect != rect2) { |
| SkDebugf("%s 4 expected union\n", __FUNCTION__); |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| static void testSimplifyDegenerate1() { |
| SkPath path, out; |
| path.setFillType(SkPath::kWinding_FillType); |
| path.addRect( 0, 0, 0, 30); |
| path.addRect(10, 10, 40, 40); |
| simplify(path, true, out); |
| SkRect rect; |
| if (!out.isRect(&rect)) { |
| SkDebugf("%s expected rect\n", __FUNCTION__); |
| } |
| if (rect != SkRect::MakeLTRB(10, 10, 40, 40)) { |
| SkDebugf("%s expected union\n", __FUNCTION__); |
| } |
| } |
| |
| static void (*simplifyTests[])() = { |
| testSimplifyCoincidentInner, |
| testSimplifyOverlapTiny, |
| testSimplifyDegenerate1, |
| testSimplifyCorner, |
| testSimplifyDegenerate, |
| testSimplifyOverlap, |
| testSimplifyDiagonal, |
| testSimplifyCoincident, |
| testSimplifyCoincidentCW, |
| testSimplifyCoincidentCCW, |
| testSimplifyCoincidentVertical, |
| testSimplifyCoincidentHorizontal, |
| testSimplifyAddL, |
| testSimplifyMulti, |
| }; |
| |
| static size_t simplifyTestsCount = sizeof(simplifyTests) / sizeof(simplifyTests[0]); |
| |
| static void (*firstTest)() = 0; |
| |
| void SimplifyRectangularPaths_Test() { |
| size_t index = 0; |
| if (firstTest) { |
| while (index < simplifyTestsCount && simplifyTests[index] != firstTest) { |
| ++index; |
| } |
| } |
| for ( ; index < simplifyTestsCount; ++index) { |
| if (simplifyTests[index] == testSimplifyCorner) { |
| // testSimplifyCorner fails because it expects two contours, where |
| // only one is returned. Both results are reasonable, but if two |
| // contours are desirable, or if we provide an option to choose |
| // between longer contours and more contours, turn this back on. For |
| // the moment, testSimplifyDiagonal also checks the test case, and |
| // permits either two rects or one non-crossing poly as valid |
| // unreported results. |
| continue; |
| } |
| (*simplifyTests[index])(); |
| } |
| } |
| |