| /* |
| * Copyright 2015 Google Inc. |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "gm/gm.h" |
| #include "include/core/SkCanvas.h" |
| #include "include/core/SkColor.h" |
| #include "include/core/SkMatrix.h" |
| #include "include/core/SkPaint.h" |
| #include "include/core/SkPath.h" |
| #include "include/core/SkPoint.h" |
| #include "include/core/SkRect.h" |
| #include "include/core/SkScalar.h" |
| #include "include/core/SkSize.h" |
| #include "include/core/SkString.h" |
| #include "include/core/SkTypes.h" |
| #include "src/core/SkPathPriv.h" |
| |
| #include <memory> |
| |
| static void create_ngon(int n, SkPoint* pts, SkScalar width, SkScalar height) { |
| float angleStep = 360.0f / n, angle = 0.0f; |
| if ((n % 2) == 1) { |
| angle = angleStep/2.0f; |
| } |
| |
| for (int i = 0; i < n; ++i) { |
| pts[i].fX = -SkScalarSin(SkDegreesToRadians(angle)) * width; |
| pts[i].fY = SkScalarCos(SkDegreesToRadians(angle)) * height; |
| angle += angleStep; |
| } |
| } |
| |
| namespace ConvexLineOnlyData { |
| // narrow rect |
| const SkPoint gPoints0[] = { |
| { -1.5f, -50.0f }, |
| { 1.5f, -50.0f }, |
| { 1.5f, 50.0f }, |
| { -1.5f, 50.0f } |
| }; |
| // narrow rect on an angle |
| const SkPoint gPoints1[] = { |
| { -50.0f, -49.0f }, |
| { -49.0f, -50.0f }, |
| { 50.0f, 49.0f }, |
| { 49.0f, 50.0f } |
| }; |
| // trap - narrow on top - wide on bottom |
| const SkPoint gPoints2[] = { |
| { -10.0f, -50.0f }, |
| { 10.0f, -50.0f }, |
| { 50.0f, 50.0f }, |
| { -50.0f, 50.0f } |
| }; |
| // wide skewed rect |
| const SkPoint gPoints3[] = { |
| { -50.0f, -50.0f }, |
| { 0.0f, -50.0f }, |
| { 50.0f, 50.0f }, |
| { 0.0f, 50.0f } |
| }; |
| // thin rect with colinear-ish lines |
| const SkPoint gPoints4[] = { |
| { -6.0f, -50.0f }, |
| { 4.0f, -50.0f }, |
| { 5.0f, -25.0f }, // remove if collinear diagonal points are not concave |
| { 6.0f, 0.0f }, |
| { 5.0f, 25.0f }, // remove if collinear diagonal points are not concave |
| { 4.0f, 50.0f }, |
| { -4.0f, 50.0f } |
| }; |
| // degenerate |
| const SkPoint gPoints5[] = { |
| { -0.025f, -0.025f }, |
| { 0.025f, -0.025f }, |
| { 0.025f, 0.025f }, |
| { -0.025f, 0.025f } |
| }; |
| // Triangle in which the first point should fuse with last |
| const SkPoint gPoints6[] = { |
| { -20.0f, -13.0f }, |
| { -20.0f, -13.05f }, |
| { 20.0f, -13.0f }, |
| { 20.0f, 27.0f } |
| }; |
| // thin rect with colinear lines |
| const SkPoint gPoints7[] = { |
| { -10.0f, -50.0f }, |
| { 10.0f, -50.0f }, |
| { 10.0f, -25.0f }, |
| { 10.0f, 0.0f }, |
| { 10.0f, 25.0f }, |
| { 10.0f, 50.0f }, |
| { -10.0f, 50.0f } |
| }; |
| // capped teardrop |
| const SkPoint gPoints8[] = { |
| { 50.00f, 50.00f }, |
| { 0.00f, 50.00f }, |
| { -15.45f, 47.55f }, |
| { -29.39f, 40.45f }, |
| { -40.45f, 29.39f }, |
| { -47.55f, 15.45f }, |
| { -50.00f, 0.00f }, |
| { -47.55f, -15.45f }, |
| { -40.45f, -29.39f }, |
| { -29.39f, -40.45f }, |
| { -15.45f, -47.55f }, |
| { 0.00f, -50.00f }, |
| { 50.00f, -50.00f } |
| }; |
| // teardrop |
| const SkPoint gPoints9[] = { |
| { 4.39f, 40.45f }, |
| { -9.55f, 47.55f }, |
| { -25.00f, 50.00f }, |
| { -40.45f, 47.55f }, |
| { -54.39f, 40.45f }, |
| { -65.45f, 29.39f }, |
| { -72.55f, 15.45f }, |
| { -75.00f, 0.00f }, |
| { -72.55f, -15.45f }, |
| { -65.45f, -29.39f }, |
| { -54.39f, -40.45f }, |
| { -40.45f, -47.55f }, |
| { -25.0f, -50.0f }, |
| { -9.55f, -47.55f }, |
| { 4.39f, -40.45f }, |
| { 75.00f, 0.00f } |
| }; |
| // clipped triangle |
| const SkPoint gPoints10[] = { |
| { -10.0f, -50.0f }, |
| { 10.0f, -50.0f }, |
| { 50.0f, 31.0f }, |
| { 40.0f, 50.0f }, |
| { -40.0f, 50.0f }, |
| { -50.0f, 31.0f }, |
| }; |
| |
| const SkPoint* gPoints[] = { |
| gPoints0, gPoints1, gPoints2, gPoints3, gPoints4, gPoints5, gPoints6, |
| gPoints7, gPoints8, gPoints9, gPoints10, |
| }; |
| |
| const size_t gSizes[] = { |
| SK_ARRAY_COUNT(gPoints0), |
| SK_ARRAY_COUNT(gPoints1), |
| SK_ARRAY_COUNT(gPoints2), |
| SK_ARRAY_COUNT(gPoints3), |
| SK_ARRAY_COUNT(gPoints4), |
| SK_ARRAY_COUNT(gPoints5), |
| SK_ARRAY_COUNT(gPoints6), |
| SK_ARRAY_COUNT(gPoints7), |
| SK_ARRAY_COUNT(gPoints8), |
| SK_ARRAY_COUNT(gPoints9), |
| SK_ARRAY_COUNT(gPoints10), |
| }; |
| static_assert(SK_ARRAY_COUNT(gSizes) == SK_ARRAY_COUNT(gPoints), "array_mismatch"); |
| } // namespace ConvexLineOnlyData |
| |
| namespace skiagm { |
| |
| // This GM is intended to exercise Ganesh's handling of convex line-only |
| // paths |
| class ConvexLineOnlyPathsGM : public GM { |
| public: |
| ConvexLineOnlyPathsGM(bool doStrokeAndFill) : fDoStrokeAndFill(doStrokeAndFill) { |
| this->setBGColor(0xFFFFFFFF); |
| } |
| |
| protected: |
| SkString onShortName() override { |
| if (fDoStrokeAndFill) { |
| return SkString("convex-lineonly-paths-stroke-and-fill"); |
| } |
| return SkString("convex-lineonly-paths"); |
| } |
| SkISize onISize() override { return SkISize::Make(kGMWidth, kGMHeight); } |
| bool runAsBench() const override { return true; } |
| |
| static SkPath GetPath(int index, SkPathDirection dir) { |
| std::unique_ptr<SkPoint[]> data(nullptr); |
| const SkPoint* points; |
| int numPts; |
| if (index < (int) SK_ARRAY_COUNT(ConvexLineOnlyData::gPoints)) { |
| // manually specified |
| points = ConvexLineOnlyData::gPoints[index]; |
| numPts = (int)ConvexLineOnlyData::gSizes[index]; |
| } else { |
| // procedurally generated |
| SkScalar width = kMaxPathHeight/2; |
| SkScalar height = kMaxPathHeight/2; |
| switch (index-SK_ARRAY_COUNT(ConvexLineOnlyData::gPoints)) { |
| case 0: |
| numPts = 3; |
| break; |
| case 1: |
| numPts = 4; |
| break; |
| case 2: |
| numPts = 5; |
| break; |
| case 3: // squashed pentagon |
| numPts = 5; |
| width = kMaxPathHeight/5; |
| break; |
| case 4: |
| numPts = 6; |
| break; |
| case 5: |
| numPts = 8; |
| break; |
| case 6: // squashed octogon |
| numPts = 8; |
| width = kMaxPathHeight/5; |
| break; |
| case 7: |
| numPts = 20; |
| break; |
| case 8: |
| numPts = 100; |
| break; |
| default: |
| numPts = 3; |
| break; |
| } |
| |
| data = std::make_unique<SkPoint[]>(numPts); |
| |
| create_ngon(numPts, data.get(), width, height); |
| points = data.get(); |
| } |
| |
| SkPathBuilder builder; |
| |
| if (SkPathDirection::kCW == dir) { |
| builder.moveTo(points[0]); |
| for (int i = 1; i < numPts; ++i) { |
| builder.lineTo(points[i]); |
| } |
| } else { |
| builder.moveTo(points[numPts-1]); |
| for (int i = numPts-2; i >= 0; --i) { |
| builder.lineTo(points[i]); |
| } |
| } |
| |
| builder.close(); |
| SkPath path = builder.detach(); |
| #ifdef SK_DEBUG |
| // Each path this method returns should be convex, only composed of |
| // lines, wound the right direction, and short enough to fit in one |
| // of the GMs rows. |
| SkASSERT(path.isConvex()); |
| SkASSERT(SkPath::kLine_SegmentMask == path.getSegmentMasks()); |
| SkPathFirstDirection actualDir = SkPathPriv::ComputeFirstDirection(path); |
| SkASSERT(SkPathPriv::AsFirstDirection(dir) == actualDir); |
| SkRect bounds = path.getBounds(); |
| SkASSERT(SkScalarNearlyEqual(bounds.centerX(), 0.0f)); |
| SkASSERT(bounds.height() <= kMaxPathHeight); |
| #endif |
| return path; |
| } |
| |
| // Draw a single path several times, shrinking it, flipping its direction |
| // and changing its start vertex each time. |
| void drawPath(SkCanvas* canvas, int index, SkPoint* offset) { |
| |
| SkPoint center; |
| { |
| SkPath path = GetPath(index, SkPathDirection::kCW); |
| if (offset->fX+path.getBounds().width() > kGMWidth) { |
| offset->fX = 0; |
| offset->fY += kMaxPathHeight; |
| if (fDoStrokeAndFill) { |
| offset->fX += kStrokeWidth / 2.0f; |
| offset->fY += kStrokeWidth / 2.0f; |
| } |
| } |
| center = { offset->fX + SkScalarHalf(path.getBounds().width()), offset->fY}; |
| offset->fX += path.getBounds().width(); |
| if (fDoStrokeAndFill) { |
| offset->fX += kStrokeWidth; |
| } |
| } |
| |
| const SkColor colors[2] = { SK_ColorBLACK, SK_ColorWHITE }; |
| const SkPathDirection dirs[2] = { SkPathDirection::kCW, SkPathDirection::kCCW }; |
| const float scales[] = { 1.0f, 0.75f, 0.5f, 0.25f, 0.1f, 0.01f, 0.001f }; |
| const SkPaint::Join joins[3] = { SkPaint::kRound_Join, |
| SkPaint::kBevel_Join, |
| SkPaint::kMiter_Join }; |
| |
| SkPaint paint; |
| paint.setAntiAlias(true); |
| |
| for (size_t i = 0; i < SK_ARRAY_COUNT(scales); ++i) { |
| SkPath path = GetPath(index, dirs[i%2]); |
| if (fDoStrokeAndFill) { |
| paint.setStyle(SkPaint::kStrokeAndFill_Style); |
| paint.setStrokeJoin(joins[i%3]); |
| paint.setStrokeWidth(SkIntToScalar(kStrokeWidth)); |
| } |
| |
| canvas->save(); |
| canvas->translate(center.fX, center.fY); |
| canvas->scale(scales[i], scales[i]); |
| paint.setColor(colors[i%2]); |
| canvas->drawPath(path, paint); |
| canvas->restore(); |
| } |
| } |
| |
| void onDraw(SkCanvas* canvas) override { |
| // the right edge of the last drawn path |
| SkPoint offset = { 0, SkScalarHalf(kMaxPathHeight) }; |
| if (fDoStrokeAndFill) { |
| offset.fX += kStrokeWidth / 2.0f; |
| offset.fY += kStrokeWidth / 2.0f; |
| } |
| |
| for (int i = 0; i < kNumPaths; ++i) { |
| this->drawPath(canvas, i, &offset); |
| } |
| |
| { |
| // Repro for crbug.com/472723 (Missing AA on portions of graphic with GPU rasterization) |
| |
| SkPaint p; |
| p.setAntiAlias(true); |
| if (fDoStrokeAndFill) { |
| p.setStyle(SkPaint::kStrokeAndFill_Style); |
| p.setStrokeJoin(SkPaint::kMiter_Join); |
| p.setStrokeWidth(SkIntToScalar(kStrokeWidth)); |
| } |
| |
| SkPath p1 = SkPath::Polygon({ |
| {60.8522949f, 364.671021f}, |
| {59.4380493f, 364.671021f}, |
| {385.414276f, 690.647217f}, |
| {386.121399f, 689.940125f}, |
| }, false); |
| canvas->save(); |
| canvas->translate(356.0f, 50.0f); |
| canvas->drawPath(p1, p); |
| canvas->restore(); |
| |
| // Repro for crbug.com/869172 (SVG path incorrectly simplified when using GPU |
| // Rasterization). This will only draw anything in the stroke-and-fill version. |
| SkPath p2 = SkPath::Polygon({ |
| {10.f, 0.f}, |
| {38.f, 0.f}, |
| {66.f, 0.f}, |
| {94.f, 0.f}, |
| {122.f, 0.f}, |
| {150.f, 0.f}, |
| {150.f, 0.f}, |
| {122.f, 0.f}, |
| {94.f, 0.f}, |
| {66.f, 0.f}, |
| {38.f, 0.f}, |
| {10.f, 0.f}, |
| }, true); |
| canvas->save(); |
| canvas->translate(0.0f, 500.0f); |
| canvas->drawPath(p2, p); |
| canvas->restore(); |
| |
| // Repro for crbug.com/856137. This path previously caused GrAAConvexTessellator to turn |
| // inset rings into outsets when adjacent bisector angles converged outside the previous |
| // ring due to accumulated error. |
| SkPath p3 = SkPath::Polygon({ |
| {1184.96f, 982.557f}, |
| {1183.71f, 982.865f}, |
| {1180.99f, 982.734f}, |
| {1178.5f, 981.541f}, |
| {1176.35f, 979.367f}, |
| {1178.94f, 938.854f}, |
| {1181.35f, 936.038f}, |
| {1183.96f, 934.117f}, |
| {1186.67f, 933.195f}, |
| {1189.36f, 933.342f}, |
| {1191.58f, 934.38f}, |
| }, true, SkPathFillType::kEvenOdd); |
| canvas->save(); |
| SkMatrix m; |
| m.setAll(0.0893210843f, 0, 79.1197586f, 0, 0.0893210843f, 300, 0, 0, 1); |
| canvas->concat(m); |
| canvas->drawPath(p3, p); |
| canvas->restore(); |
| } |
| } |
| |
| private: |
| static constexpr int kStrokeWidth = 10; |
| static constexpr int kNumPaths = 20; |
| static constexpr int kMaxPathHeight = 100; |
| static constexpr int kGMWidth = 512; |
| static constexpr int kGMHeight = 512; |
| |
| bool fDoStrokeAndFill; |
| |
| typedef GM INHERITED; |
| }; |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| DEF_GM(return new ConvexLineOnlyPathsGM(false);) |
| DEF_GM(return new ConvexLineOnlyPathsGM(true);) |
| } // namespace skiagm |