| /* |
| * Copyright 2012 Google Inc. |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "BenchTimer.h" |
| #include "PictureBenchmark.h" |
| #include "SkBenchLogger.h" |
| #include "SkCanvas.h" |
| #include "SkGraphics.h" |
| #include "SkMath.h" |
| #include "SkOSFile.h" |
| #include "SkPicture.h" |
| #include "SkStream.h" |
| #include "SkTArray.h" |
| #include "picture_utils.h" |
| |
| const int DEFAULT_REPEATS = 1; |
| |
| static void usage(const char* argv0) { |
| SkDebugf("SkPicture benchmarking tool\n"); |
| SkDebugf("\n" |
| "Usage: \n" |
| " %s <inputDir>...\n" |
| " [--logFile filename][--timers [wcgWC]*][--logPerIter 1|0][--min]\n" |
| " [--repeat] \n" |
| " [--mode pow2tile minWidth height[] | record | simple\n" |
| " | tile width[] height[] | playbackCreation]\n" |
| " [--pipe]\n" |
| " [--multi numThreads]\n" |
| " [--device bitmap" |
| #if SK_SUPPORT_GPU |
| " | gpu" |
| #endif |
| "]" |
| , argv0); |
| SkDebugf("\n\n"); |
| SkDebugf( |
| " inputDir: A list of directories and files to use as input. Files are\n" |
| " expected to have the .skp extension.\n\n" |
| " --logFile filename : destination for writing log output, in addition to stdout.\n"); |
| SkDebugf(" --logPerIter 1|0 : " |
| "Log each repeat timer instead of mean, default is disabled.\n"); |
| SkDebugf(" --min : Print the minimum times (instead of average).\n"); |
| SkDebugf(" --timers [wcgWC]* : " |
| "Display wall, cpu, gpu, truncated wall or truncated cpu time for each picture.\n"); |
| SkDebugf( |
| " --mode pow2tile minWidht height[] | record | simple\n" |
| " | tile width[] height[] | playbackCreation:\n" |
| " Run in the corresponding mode.\n" |
| " Default is simple.\n"); |
| SkDebugf( |
| " pow2tile minWidth height[], Creates tiles with widths\n" |
| " that are all a power of two\n" |
| " such that they minimize the\n" |
| " amount of wasted tile space.\n" |
| " minWidth is the minimum width\n" |
| " of these tiles and must be a\n" |
| " power of two. Simple\n" |
| " rendering using these tiles\n" |
| " is benchmarked.\n"); |
| SkDebugf( |
| " record, Benchmark picture to picture recording.\n"); |
| SkDebugf( |
| " simple, Benchmark a simple rendering.\n"); |
| SkDebugf( |
| " tile width[] height[], Benchmark simple rendering using\n" |
| " tiles with the given dimensions.\n"); |
| SkDebugf( |
| " playbackCreation, Benchmark creation of the SkPicturePlayback.\n"); |
| SkDebugf("\n"); |
| SkDebugf( |
| " --multi numThreads : Set the number of threads for multi threaded drawing. Must be greater\n" |
| " than 1. Only works with tiled rendering.\n" |
| " --pipe: Benchmark SkGPipe rendering. Compatible with tiled, multithreaded rendering.\n"); |
| SkDebugf( |
| " --device bitmap" |
| #if SK_SUPPORT_GPU |
| " | gpu" |
| #endif |
| ": Use the corresponding device. Default is bitmap.\n"); |
| SkDebugf( |
| " bitmap, Render to a bitmap.\n"); |
| #if SK_SUPPORT_GPU |
| SkDebugf( |
| " gpu, Render to the GPU.\n"); |
| #endif |
| SkDebugf("\n"); |
| SkDebugf( |
| " --repeat: " |
| "Set the number of times to repeat each test." |
| " Default is %i.\n", DEFAULT_REPEATS); |
| } |
| |
| SkBenchLogger gLogger; |
| |
| static bool run_single_benchmark(const SkString& inputPath, |
| sk_tools::PictureBenchmark& benchmark) { |
| SkFILEStream inputStream; |
| |
| inputStream.setPath(inputPath.c_str()); |
| if (!inputStream.isValid()) { |
| SkString err; |
| err.printf("Could not open file %s\n", inputPath.c_str()); |
| gLogger.logError(err); |
| return false; |
| } |
| |
| bool success = false; |
| SkPicture picture(&inputStream, &success); |
| if (!success) { |
| SkString err; |
| err.printf("Could not read an SkPicture from %s\n", inputPath.c_str()); |
| gLogger.logError(err); |
| return false; |
| } |
| |
| SkString filename; |
| sk_tools::get_basename(&filename, inputPath); |
| |
| SkString result; |
| result.printf("running bench [%i %i] %s ", picture.width(), |
| picture.height(), filename.c_str()); |
| gLogger.logProgress(result); |
| |
| benchmark.run(&picture); |
| return true; |
| } |
| |
| static void parse_commandline(int argc, char* const argv[], SkTArray<SkString>* inputs, |
| sk_tools::PictureBenchmark* benchmark) { |
| const char* argv0 = argv[0]; |
| char* const* stop = argv + argc; |
| |
| int repeats = DEFAULT_REPEATS; |
| sk_tools::PictureRenderer::SkDeviceTypes deviceType = |
| sk_tools::PictureRenderer::kBitmap_DeviceType; |
| |
| sk_tools::PictureRenderer* renderer = NULL; |
| |
| // Create a string to show our current settings. |
| // TODO: Make it prettier. Currently it just repeats the command line. |
| SkString commandLine("bench_pictures:"); |
| for (int i = 1; i < argc; i++) { |
| commandLine.appendf(" %s", *(argv+i)); |
| } |
| commandLine.append("\n"); |
| |
| bool usePipe = false; |
| int numThreads = 1; |
| bool useTiles = false; |
| const char* widthString = NULL; |
| const char* heightString = NULL; |
| bool isPowerOf2Mode = false; |
| const char* mode = NULL; |
| for (++argv; argv < stop; ++argv) { |
| if (0 == strcmp(*argv, "--repeat")) { |
| ++argv; |
| if (argv < stop) { |
| repeats = atoi(*argv); |
| if (repeats < 1) { |
| gLogger.logError("--repeat must be given a value > 0\n"); |
| exit(-1); |
| } |
| } else { |
| gLogger.logError("Missing arg for --repeat\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| } else if (0 == strcmp(*argv, "--pipe")) { |
| usePipe = true; |
| } else if (0 == strcmp(*argv, "--logFile")) { |
| argv++; |
| if (argv < stop) { |
| if (!gLogger.SetLogFile(*argv)) { |
| SkString str; |
| str.printf("Could not open %s for writing.", *argv); |
| gLogger.logError(str); |
| usage(argv0); |
| // TODO(borenet): We're disabling this for now, due to |
| // write-protected Android devices. The very short-term |
| // solution is to ignore the fact that we have no log file. |
| //exit(-1); |
| } |
| } else { |
| gLogger.logError("Missing arg for --logFile\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| } else if (0 == strcmp(*argv, "--multi")) { |
| ++argv; |
| if (argv >= stop) { |
| gLogger.logError("Missing arg for --multi\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| numThreads = atoi(*argv); |
| if (numThreads < 2) { |
| gLogger.logError("Number of threads must be at least 2.\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| } else if (0 == strcmp(*argv, "--mode")) { |
| |
| ++argv; |
| if (argv >= stop) { |
| gLogger.logError("Missing mode for --mode\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| |
| if (0 == strcmp(*argv, "record")) { |
| renderer = SkNEW(sk_tools::RecordPictureRenderer); |
| } else if (0 == strcmp(*argv, "simple")) { |
| renderer = SkNEW(sk_tools::SimplePictureRenderer); |
| } else if ((0 == strcmp(*argv, "tile")) || (0 == strcmp(*argv, "pow2tile"))) { |
| useTiles = true; |
| mode = *argv; |
| |
| if (0 == strcmp(*argv, "pow2tile")) { |
| isPowerOf2Mode = true; |
| } |
| |
| ++argv; |
| if (argv >= stop) { |
| SkString err; |
| err.printf("Missing width for --mode %s\n", mode); |
| gLogger.logError(err); |
| usage(argv0); |
| exit(-1); |
| } |
| |
| widthString = *argv; |
| ++argv; |
| if (argv >= stop) { |
| gLogger.logError("Missing height for --mode tile\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| heightString = *argv; |
| } else if (0 == strcmp(*argv, "playbackCreation")) { |
| renderer = SkNEW(sk_tools::PlaybackCreationRenderer); |
| } else { |
| SkString err; |
| err.printf("%s is not a valid mode for --mode\n", *argv); |
| gLogger.logError(err); |
| usage(argv0); |
| exit(-1); |
| } |
| } else if (0 == strcmp(*argv, "--device")) { |
| ++argv; |
| if (argv >= stop) { |
| gLogger.logError("Missing mode for --device\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| |
| if (0 == strcmp(*argv, "bitmap")) { |
| deviceType = sk_tools::PictureRenderer::kBitmap_DeviceType; |
| } |
| #if SK_SUPPORT_GPU |
| else if (0 == strcmp(*argv, "gpu")) { |
| deviceType = sk_tools::PictureRenderer::kGPU_DeviceType; |
| } |
| #endif |
| else { |
| SkString err; |
| err.printf("%s is not a valid mode for --device\n", *argv); |
| gLogger.logError(err); |
| usage(argv0); |
| exit(-1); |
| } |
| } else if (0 == strcmp(*argv, "--timers")) { |
| ++argv; |
| if (argv < stop) { |
| bool timerWall = false; |
| bool truncatedTimerWall = false; |
| bool timerCpu = false; |
| bool truncatedTimerCpu = false; |
| bool timerGpu = false; |
| for (char* t = *argv; *t; ++t) { |
| switch (*t) { |
| case 'w': |
| timerWall = true; |
| break; |
| case 'c': |
| timerCpu = true; |
| break; |
| case 'W': |
| truncatedTimerWall = true; |
| break; |
| case 'C': |
| truncatedTimerCpu = true; |
| break; |
| case 'g': |
| timerGpu = true; |
| break; |
| default: { |
| break; |
| } |
| } |
| } |
| benchmark->setTimersToShow(timerWall, truncatedTimerWall, timerCpu, |
| truncatedTimerCpu, timerGpu); |
| } else { |
| gLogger.logError("Missing arg for --timers\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| } else if (0 == strcmp(*argv, "--min")) { |
| benchmark->setPrintMin(true); |
| } else if (0 == strcmp(*argv, "--logPerIter")) { |
| ++argv; |
| if (argv < stop) { |
| bool log = atoi(*argv) != 0; |
| benchmark->setLogPerIter(log); |
| } else { |
| gLogger.logError("Missing arg for --logPerIter\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| } else if (0 == strcmp(*argv, "--help") || 0 == strcmp(*argv, "-h")) { |
| usage(argv0); |
| exit(0); |
| } else { |
| inputs->push_back(SkString(*argv)); |
| } |
| } |
| |
| if (numThreads > 1 && !useTiles) { |
| gLogger.logError("Multithreaded drawing requires tiled rendering.\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| |
| if (useTiles) { |
| SkASSERT(NULL == renderer); |
| sk_tools::TiledPictureRenderer* tiledRenderer = SkNEW(sk_tools::TiledPictureRenderer); |
| if (isPowerOf2Mode) { |
| int minWidth = atoi(widthString); |
| if (!SkIsPow2(minWidth) || minWidth < 0) { |
| tiledRenderer->unref(); |
| SkString err; |
| err.printf("-mode %s must be given a width" |
| " value that is a power of two\n", mode); |
| gLogger.logError(err); |
| usage(argv0); |
| exit(-1); |
| } |
| tiledRenderer->setTileMinPowerOf2Width(minWidth); |
| } else if (sk_tools::is_percentage(widthString)) { |
| tiledRenderer->setTileWidthPercentage(atof(widthString)); |
| if (!(tiledRenderer->getTileWidthPercentage() > 0)) { |
| tiledRenderer->unref(); |
| gLogger.logError("--mode tile must be given a width percentage > 0\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| } else { |
| tiledRenderer->setTileWidth(atoi(widthString)); |
| if (!(tiledRenderer->getTileWidth() > 0)) { |
| tiledRenderer->unref(); |
| gLogger.logError("--mode tile must be given a width > 0\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| } |
| |
| if (sk_tools::is_percentage(heightString)) { |
| tiledRenderer->setTileHeightPercentage(atof(heightString)); |
| if (!(tiledRenderer->getTileHeightPercentage() > 0)) { |
| tiledRenderer->unref(); |
| gLogger.logError("--mode tile must be given a height percentage > 0\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| } else { |
| tiledRenderer->setTileHeight(atoi(heightString)); |
| if (!(tiledRenderer->getTileHeight() > 0)) { |
| tiledRenderer->unref(); |
| gLogger.logError("--mode tile must be given a height > 0\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| } |
| if (numThreads > 1) { |
| #if SK_SUPPORT_GPU |
| if (sk_tools::PictureRenderer::kGPU_DeviceType == deviceType) { |
| tiledRenderer->unref(); |
| gLogger.logError("GPU not compatible with multithreaded tiling.\n"); |
| usage(argv0); |
| exit(-1); |
| } |
| #endif |
| tiledRenderer->setNumberOfThreads(numThreads); |
| } |
| tiledRenderer->setUsePipe(usePipe); |
| renderer = tiledRenderer; |
| } else if (usePipe) { |
| renderer = SkNEW(sk_tools::PipePictureRenderer); |
| } |
| if (inputs->count() < 1) { |
| SkSafeUnref(renderer); |
| usage(argv0); |
| exit(-1); |
| } |
| |
| if (NULL == renderer) { |
| renderer = SkNEW(sk_tools::SimplePictureRenderer); |
| } |
| benchmark->setRenderer(renderer)->unref(); |
| benchmark->setRepeats(repeats); |
| benchmark->setDeviceType(deviceType); |
| benchmark->setLogger(&gLogger); |
| // Report current settings: |
| gLogger.logProgress(commandLine); |
| } |
| |
| static int process_input(const SkString& input, |
| sk_tools::PictureBenchmark& benchmark) { |
| SkOSFile::Iter iter(input.c_str(), "skp"); |
| SkString inputFilename; |
| int failures = 0; |
| if (iter.next(&inputFilename)) { |
| do { |
| SkString inputPath; |
| sk_tools::make_filepath(&inputPath, input, inputFilename); |
| if (!run_single_benchmark(inputPath, benchmark)) { |
| ++failures; |
| } |
| } while(iter.next(&inputFilename)); |
| } else if (SkStrEndsWith(input.c_str(), ".skp")) { |
| if (!run_single_benchmark(input, benchmark)) { |
| ++failures; |
| } |
| } else { |
| SkString warning; |
| warning.printf("Warning: skipping %s\n", input.c_str()); |
| gLogger.logError(warning); |
| } |
| return failures; |
| } |
| |
| int tool_main(int argc, char** argv); |
| int tool_main(int argc, char** argv) { |
| #ifdef SK_ENABLE_INST_COUNT |
| gPrintInstCount = true; |
| #endif |
| SkAutoGraphics ag; |
| |
| SkTArray<SkString> inputs; |
| sk_tools::PictureBenchmark benchmark; |
| |
| parse_commandline(argc, argv, &inputs, &benchmark); |
| |
| int failures = 0; |
| for (int i = 0; i < inputs.count(); ++i) { |
| failures += process_input(inputs[i], benchmark); |
| } |
| |
| if (failures != 0) { |
| SkString err; |
| err.printf("Failed to run %i benchmarks.\n", failures); |
| gLogger.logError(err); |
| return 1; |
| } |
| return 0; |
| } |
| |
| #if !defined SK_BUILD_FOR_IOS |
| int main(int argc, char * const argv[]) { |
| return tool_main(argc, (char**) argv); |
| } |
| #endif |