| ''' |
| Created on May 16, 2011 |
| |
| @author: bungeman |
| ''' |
| import bench_util |
| import getopt |
| import httplib |
| import itertools |
| import json |
| import os |
| import re |
| import sys |
| import urllib |
| import urllib2 |
| import xml.sax.saxutils |
| |
| # We throw out any measurement outside this range, and log a warning. |
| MIN_REASONABLE_TIME = 0 |
| MAX_REASONABLE_TIME = 99999 |
| |
| # Constants for prefixes in output title used in buildbot. |
| TITLE_PREAMBLE = 'Bench_Performance_for_' |
| TITLE_PREAMBLE_LENGTH = len(TITLE_PREAMBLE) |
| |
| def usage(): |
| """Prints simple usage information.""" |
| |
| print '-a <url> the url to use for adding bench values to app engine app.' |
| print ' Example: "https://skiadash.appspot.com/add_point".' |
| print ' If not set, will skip this step.' |
| print '-b <bench> the bench to show.' |
| print '-c <config> the config to show (GPU, 8888, 565, etc).' |
| print '-d <dir> a directory containing bench_r<revision>_<scalar> files.' |
| print '-e <file> file containing expected bench values/ranges.' |
| print ' Will raise exception if actual bench values are out of range.' |
| print ' See bench_expectations.txt for data format and examples.' |
| print '-f <revision>[:<revision>] the revisions to use for fitting.' |
| print ' Negative <revision> is taken as offset from most recent revision.' |
| print '-i <time> the time to ignore (w, c, g, etc).' |
| print ' The flag is ignored when -t is set; otherwise we plot all the' |
| print ' times except the one specified here.' |
| print '-l <title> title to use for the output graph' |
| print '-m <representation> representation of bench value.' |
| print ' See _ListAlgorithm class in bench_util.py.' |
| print '-o <path> path to which to write output.' |
| print '-r <revision>[:<revision>] the revisions to show.' |
| print ' Negative <revision> is taken as offset from most recent revision.' |
| print '-s <setting>[=<value>] a setting to show (alpha, scalar, etc).' |
| print '-t <time> the time to show (w, c, g, etc).' |
| print '-x <int> the desired width of the svg.' |
| print '-y <int> the desired height of the svg.' |
| print '--default-setting <setting>[=<value>] setting for those without.' |
| |
| |
| class Label: |
| """The information in a label. |
| |
| (str, str, str, str, {str:str})""" |
| def __init__(self, bench, config, time_type, settings): |
| self.bench = bench |
| self.config = config |
| self.time_type = time_type |
| self.settings = settings |
| |
| def __repr__(self): |
| return "Label(%s, %s, %s, %s)" % ( |
| str(self.bench), |
| str(self.config), |
| str(self.time_type), |
| str(self.settings), |
| ) |
| |
| def __str__(self): |
| return "%s_%s_%s_%s" % ( |
| str(self.bench), |
| str(self.config), |
| str(self.time_type), |
| str(self.settings), |
| ) |
| |
| def __eq__(self, other): |
| return (self.bench == other.bench and |
| self.config == other.config and |
| self.time_type == other.time_type and |
| self.settings == other.settings) |
| |
| def __hash__(self): |
| return (hash(self.bench) ^ |
| hash(self.config) ^ |
| hash(self.time_type) ^ |
| hash(frozenset(self.settings.iteritems()))) |
| |
| def get_latest_revision(directory): |
| """Returns the latest revision number found within this directory. |
| """ |
| latest_revision_found = -1 |
| for bench_file in os.listdir(directory): |
| file_name_match = re.match('bench_r(\d+)_(\S+)', bench_file) |
| if (file_name_match is None): |
| continue |
| revision = int(file_name_match.group(1)) |
| if revision > latest_revision_found: |
| latest_revision_found = revision |
| if latest_revision_found < 0: |
| return None |
| else: |
| return latest_revision_found |
| |
| def parse_dir(directory, default_settings, oldest_revision, newest_revision, |
| rep): |
| """Parses bench data from files like bench_r<revision>_<scalar>. |
| |
| (str, {str, str}, Number, Number) -> {int:[BenchDataPoints]}""" |
| revision_data_points = {} # {revision : [BenchDataPoints]} |
| file_list = os.listdir(directory) |
| file_list.sort() |
| for bench_file in file_list: |
| file_name_match = re.match('bench_r(\d+)_(\S+)', bench_file) |
| if (file_name_match is None): |
| continue |
| |
| revision = int(file_name_match.group(1)) |
| scalar_type = file_name_match.group(2) |
| |
| if (revision < oldest_revision or revision > newest_revision): |
| continue |
| |
| file_handle = open(directory + '/' + bench_file, 'r') |
| |
| if (revision not in revision_data_points): |
| revision_data_points[revision] = [] |
| default_settings['scalar'] = scalar_type |
| revision_data_points[revision].extend( |
| bench_util.parse(default_settings, file_handle, rep)) |
| file_handle.close() |
| return revision_data_points |
| |
| def add_to_revision_data_points(new_point, revision, revision_data_points): |
| """Add new_point to set of revision_data_points we are building up. |
| """ |
| if (revision not in revision_data_points): |
| revision_data_points[revision] = [] |
| revision_data_points[revision].append(new_point) |
| |
| def filter_data_points(unfiltered_revision_data_points): |
| """Filter out any data points that are utterly bogus. |
| |
| Returns (allowed_revision_data_points, ignored_revision_data_points): |
| allowed_revision_data_points: points that survived the filter |
| ignored_revision_data_points: points that did NOT survive the filter |
| """ |
| allowed_revision_data_points = {} # {revision : [BenchDataPoints]} |
| ignored_revision_data_points = {} # {revision : [BenchDataPoints]} |
| revisions = unfiltered_revision_data_points.keys() |
| revisions.sort() |
| for revision in revisions: |
| for point in unfiltered_revision_data_points[revision]: |
| if point.time < MIN_REASONABLE_TIME or point.time > MAX_REASONABLE_TIME: |
| add_to_revision_data_points(point, revision, ignored_revision_data_points) |
| else: |
| add_to_revision_data_points(point, revision, allowed_revision_data_points) |
| return (allowed_revision_data_points, ignored_revision_data_points) |
| |
| def get_abs_path(relative_path): |
| """My own implementation of os.path.abspath() that better handles paths |
| which approach Window's 260-character limit. |
| See https://code.google.com/p/skia/issues/detail?id=674 |
| |
| This implementation adds path components one at a time, resolving the |
| absolute path each time, to take advantage of any chdirs into outer |
| directories that will shorten the total path length. |
| |
| TODO: share a single implementation with upload_to_bucket.py, instead |
| of pasting this same code into both files.""" |
| if os.path.isabs(relative_path): |
| return relative_path |
| path_parts = relative_path.split(os.sep) |
| abs_path = os.path.abspath('.') |
| for path_part in path_parts: |
| abs_path = os.path.abspath(os.path.join(abs_path, path_part)) |
| return abs_path |
| |
| def redirect_stdout(output_path): |
| """Redirect all following stdout to a file. |
| |
| You may be asking yourself, why redirect stdout within Python rather than |
| redirecting the script's output in the calling shell? |
| The answer lies in https://code.google.com/p/skia/issues/detail?id=674 |
| ('buildbot: windows GenerateBenchGraphs step fails due to filename length'): |
| On Windows, we need to generate the absolute path within Python to avoid |
| the operating system's 260-character pathname limit, including chdirs.""" |
| abs_path = get_abs_path(output_path) |
| sys.stdout = open(abs_path, 'w') |
| |
| def create_lines(revision_data_points, settings |
| , bench_of_interest, config_of_interest, time_of_interest |
| , time_to_ignore): |
| """Convert revision data into a dictionary of line data. |
| |
| Args: |
| revision_data_points: a dictionary with integer keys (revision #) and a |
| list of bench data points as values |
| settings: a dictionary of setting names to value |
| bench_of_interest: optional filter parameters: which bench type is of |
| interest. If None, process them all. |
| config_of_interest: optional filter parameters: which config type is of |
| interest. If None, process them all. |
| time_of_interest: optional filter parameters: which timer type is of |
| interest. If None, process them all. |
| time_to_ignore: optional timer type to ignore |
| |
| Returns: |
| a dictionary of this form: |
| keys = Label objects |
| values = a list of (x, y) tuples sorted such that x values increase |
| monotonically |
| """ |
| revisions = revision_data_points.keys() |
| revisions.sort() |
| lines = {} # {Label:[(x,y)] | x[n] <= x[n+1]} |
| for revision in revisions: |
| for point in revision_data_points[revision]: |
| if (bench_of_interest is not None and |
| not bench_of_interest == point.bench): |
| continue |
| |
| if (config_of_interest is not None and |
| not config_of_interest == point.config): |
| continue |
| |
| if (time_of_interest is not None and |
| not time_of_interest == point.time_type): |
| continue |
| elif (time_to_ignore is not None and |
| time_to_ignore == point.time_type): |
| continue |
| |
| skip = False |
| for key, value in settings.items(): |
| if key in point.settings and point.settings[key] != value: |
| skip = True |
| break |
| if skip: |
| continue |
| |
| line_name = Label(point.bench |
| , point.config |
| , point.time_type |
| , point.settings) |
| |
| if line_name not in lines: |
| lines[line_name] = [] |
| |
| lines[line_name].append((revision, point.time)) |
| |
| return lines |
| |
| def bounds(lines): |
| """Finds the bounding rectangle for the lines. |
| |
| {Label:[(x,y)]} -> ((min_x, min_y),(max_x,max_y))""" |
| min_x = bench_util.Max |
| min_y = bench_util.Max |
| max_x = bench_util.Min |
| max_y = bench_util.Min |
| |
| for line in lines.itervalues(): |
| for x, y in line: |
| min_x = min(min_x, x) |
| min_y = min(min_y, y) |
| max_x = max(max_x, x) |
| max_y = max(max_y, y) |
| |
| return ((min_x, min_y), (max_x, max_y)) |
| |
| def create_regressions(lines, start_x, end_x): |
| """Creates regression data from line segments. |
| |
| ({Label:[(x,y)] | [n].x <= [n+1].x}, Number, Number) |
| -> {Label:LinearRegression}""" |
| regressions = {} # {Label : LinearRegression} |
| |
| for label, line in lines.iteritems(): |
| regression_line = [p for p in line if start_x <= p[0] <= end_x] |
| |
| if (len(regression_line) < 2): |
| continue |
| regression = bench_util.LinearRegression(regression_line) |
| regressions[label] = regression |
| |
| return regressions |
| |
| def bounds_slope(regressions): |
| """Finds the extreme up and down slopes of a set of linear regressions. |
| |
| ({Label:LinearRegression}) -> (max_up_slope, min_down_slope)""" |
| max_up_slope = 0 |
| min_down_slope = 0 |
| for regression in regressions.itervalues(): |
| min_slope = regression.find_min_slope() |
| max_up_slope = max(max_up_slope, min_slope) |
| min_down_slope = min(min_down_slope, min_slope) |
| |
| return (max_up_slope, min_down_slope) |
| |
| def main(): |
| """Parses command line and writes output.""" |
| |
| try: |
| opts, _ = getopt.getopt(sys.argv[1:] |
| , "a:b:c:d:e:f:i:l:m:o:r:s:t:x:y:" |
| , "default-setting=") |
| except getopt.GetoptError, err: |
| print str(err) |
| usage() |
| sys.exit(2) |
| |
| directory = None |
| config_of_interest = None |
| bench_of_interest = None |
| time_of_interest = None |
| time_to_ignore = None |
| output_path = None |
| bench_expectations = {} |
| appengine_url = None # used for adding data to appengine datastore |
| rep = None # bench representation algorithm |
| revision_range = '0:' |
| regression_range = '0:' |
| latest_revision = None |
| requested_height = None |
| requested_width = None |
| title = 'Bench graph' |
| settings = {} |
| default_settings = {} |
| |
| def parse_range(range): |
| """Takes '<old>[:<new>]' as a string and returns (old, new). |
| Any revision numbers that are dependent on the latest revision number |
| will be filled in based on latest_revision. |
| """ |
| old, _, new = range.partition(":") |
| old = int(old) |
| if old < 0: |
| old += latest_revision; |
| if not new: |
| new = latest_revision; |
| new = int(new) |
| if new < 0: |
| new += latest_revision; |
| return (old, new) |
| |
| def add_setting(settings, setting): |
| """Takes <key>[=<value>] adds {key:value} or {key:True} to settings.""" |
| name, _, value = setting.partition('=') |
| if not value: |
| settings[name] = True |
| else: |
| settings[name] = value |
| |
| def read_expectations(expectations, filename): |
| """Reads expectations data from file and put in expectations dict.""" |
| for expectation in open(filename).readlines(): |
| elements = expectation.strip().split(',') |
| if not elements[0] or elements[0].startswith('#'): |
| continue |
| if len(elements) != 5: |
| raise Exception("Invalid expectation line format: %s" % |
| expectation) |
| bench_entry = elements[0] + ',' + elements[1] |
| if bench_entry in expectations: |
| raise Exception("Dup entries for bench expectation %s" % |
| bench_entry) |
| # [<Bench_BmpConfig_TimeType>,<Platform-Alg>] -> (LB, UB) |
| expectations[bench_entry] = (float(elements[-2]), |
| float(elements[-1])) |
| |
| def check_expectations(lines, expectations, newest_revision, key_suffix): |
| """Check if there are benches in latest rev outside expected range.""" |
| exceptions = [] |
| for line in lines: |
| line_str = str(line) |
| bench_platform_key = (line_str[ : line_str.find('_{')] + ',' + |
| key_suffix) |
| this_revision, this_bench_value = lines[line][-1] |
| if (this_revision != newest_revision or |
| bench_platform_key not in expectations): |
| # Skip benches without value for latest revision. |
| continue |
| this_min, this_max = expectations[bench_platform_key] |
| if this_bench_value < this_min or this_bench_value > this_max: |
| exceptions.append('Bench %s value %s out of range [%s, %s].' % |
| (bench_platform_key, this_bench_value, this_min, this_max)) |
| if exceptions: |
| raise Exception('Bench values out of range:\n' + |
| '\n'.join(exceptions)) |
| |
| def write_to_appengine(line_data_dict, url, newest_revision, bot): |
| """Writes latest bench values to appengine datastore. |
| line_data_dict: dictionary from create_lines. |
| url: the appengine url used to send bench values to write |
| newest_revision: the latest revision that this script reads |
| bot: the bot platform the bench is run on |
| """ |
| config_data_dic = {} |
| for label in line_data_dict.iterkeys(): |
| if not label.bench.endswith('.skp') or label.time_type: |
| # filter out non-picture and non-walltime benches |
| continue |
| config = label.config |
| rev, val = line_data_dict[label][-1] |
| # This assumes that newest_revision is >= the revision of the last |
| # data point we have for each line. |
| if rev != newest_revision: |
| continue |
| if config not in config_data_dic: |
| config_data_dic[config] = [] |
| config_data_dic[config].append(label.bench.replace('.skp', '') + |
| ':%.2f' % val) |
| for config in config_data_dic: |
| if config_data_dic[config]: |
| data = {'master': 'Skia', 'bot': bot, 'test': config, |
| 'revision': newest_revision, |
| 'benches': ','.join(config_data_dic[config])} |
| req = urllib2.Request(appengine_url, |
| urllib.urlencode({'data': json.dumps(data)})) |
| try: |
| urllib2.urlopen(req) |
| except urllib2.HTTPError, e: |
| sys.stderr.write("HTTPError for JSON data %s: %s\n" % ( |
| data, e)) |
| except urllib2.URLError, e: |
| sys.stderr.write("URLError for JSON data %s: %s\n" % ( |
| data, e)) |
| except httplib.HTTPException, e: |
| sys.stderr.write("HTTPException for JSON data %s: %s\n" % ( |
| data, e)) |
| |
| try: |
| for option, value in opts: |
| if option == "-a": |
| appengine_url = value |
| elif option == "-b": |
| bench_of_interest = value |
| elif option == "-c": |
| config_of_interest = value |
| elif option == "-d": |
| directory = value |
| elif option == "-e": |
| read_expectations(bench_expectations, value) |
| elif option == "-f": |
| regression_range = value |
| elif option == "-i": |
| time_to_ignore = value |
| elif option == "-l": |
| title = value |
| elif option == "-m": |
| rep = value |
| elif option == "-o": |
| output_path = value |
| redirect_stdout(output_path) |
| elif option == "-r": |
| revision_range = value |
| elif option == "-s": |
| add_setting(settings, value) |
| elif option == "-t": |
| time_of_interest = value |
| elif option == "-x": |
| requested_width = int(value) |
| elif option == "-y": |
| requested_height = int(value) |
| elif option == "--default-setting": |
| add_setting(default_settings, value) |
| else: |
| usage() |
| assert False, "unhandled option" |
| except ValueError: |
| usage() |
| sys.exit(2) |
| |
| if directory is None: |
| usage() |
| sys.exit(2) |
| |
| if not output_path: |
| print 'Warning: No output path provided. No graphs will be written.' |
| |
| if time_of_interest: |
| time_to_ignore = None |
| |
| # The title flag (-l) provided in buildbot slave is in the format |
| # Bench_Performance_for_<platform>, and we want to extract <platform> |
| # for use in platform_and_alg to track matching benches later. If title flag |
| # is not in this format, there may be no matching benches in the file |
| # provided by the expectation_file flag (-e). |
| bot = title # To store the platform as bot name |
| platform_and_alg = title |
| if platform_and_alg.startswith(TITLE_PREAMBLE): |
| bot = platform_and_alg[TITLE_PREAMBLE_LENGTH:] |
| platform_and_alg = bot + '-' + rep |
| title += ' [representation: %s]' % rep |
| |
| latest_revision = get_latest_revision(directory) |
| oldest_revision, newest_revision = parse_range(revision_range) |
| oldest_regression, newest_regression = parse_range(regression_range) |
| |
| unfiltered_revision_data_points = parse_dir(directory |
| , default_settings |
| , oldest_revision |
| , newest_revision |
| , rep) |
| |
| # Filter out any data points that are utterly bogus... make sure to report |
| # that we did so later! |
| (allowed_revision_data_points, ignored_revision_data_points) = filter_data_points( |
| unfiltered_revision_data_points) |
| |
| # Update oldest_revision and newest_revision based on the data we could find |
| all_revision_numbers = allowed_revision_data_points.keys() |
| oldest_revision = min(all_revision_numbers) |
| newest_revision = max(all_revision_numbers) |
| |
| lines = create_lines(allowed_revision_data_points |
| , settings |
| , bench_of_interest |
| , config_of_interest |
| , time_of_interest |
| , time_to_ignore) |
| |
| regressions = create_regressions(lines |
| , oldest_regression |
| , newest_regression) |
| |
| if output_path: |
| output_xhtml(lines, oldest_revision, newest_revision, |
| ignored_revision_data_points, regressions, requested_width, |
| requested_height, title) |
| |
| if appengine_url: |
| write_to_appengine(lines, appengine_url, newest_revision, bot) |
| |
| if bench_expectations: |
| check_expectations(lines, bench_expectations, newest_revision, |
| platform_and_alg) |
| |
| def qa(out): |
| """Stringify input and quote as an xml attribute.""" |
| return xml.sax.saxutils.quoteattr(str(out)) |
| def qe(out): |
| """Stringify input and escape as xml data.""" |
| return xml.sax.saxutils.escape(str(out)) |
| |
| def create_select(qualifier, lines, select_id=None): |
| """Output select with options showing lines which qualifier maps to it. |
| |
| ((Label) -> str, {Label:_}, str?) -> _""" |
| options = {} #{ option : [Label]} |
| for label in lines.keys(): |
| option = qualifier(label) |
| if (option not in options): |
| options[option] = [] |
| options[option].append(label) |
| option_list = list(options.keys()) |
| option_list.sort() |
| print '<select class="lines"', |
| if select_id is not None: |
| print 'id=%s' % qa(select_id) |
| print 'multiple="true" size="10" onchange="updateSvg();">' |
| for option in option_list: |
| print '<option value=' + qa('[' + |
| reduce(lambda x,y:x+json.dumps(str(y))+',',options[option],"")[0:-1] |
| + ']') + '>'+qe(option)+'</option>' |
| print '</select>' |
| |
| def output_ignored_data_points_warning(ignored_revision_data_points): |
| """Write description of ignored_revision_data_points to stdout as xhtml. |
| """ |
| num_ignored_points = 0 |
| description = '' |
| revisions = ignored_revision_data_points.keys() |
| if revisions: |
| revisions.sort() |
| revisions.reverse() |
| for revision in revisions: |
| num_ignored_points += len(ignored_revision_data_points[revision]) |
| points_at_this_revision = [] |
| for point in ignored_revision_data_points[revision]: |
| points_at_this_revision.append(point.bench) |
| points_at_this_revision.sort() |
| description += 'r%d: %s\n' % (revision, points_at_this_revision) |
| if num_ignored_points == 0: |
| print 'Did not discard any data points; all were within the range [%d-%d]' % ( |
| MIN_REASONABLE_TIME, MAX_REASONABLE_TIME) |
| else: |
| print '<table width="100%" bgcolor="ff0000"><tr><td align="center">' |
| print 'Discarded %d data points outside of range [%d-%d]' % ( |
| num_ignored_points, MIN_REASONABLE_TIME, MAX_REASONABLE_TIME) |
| print '</td></tr><tr><td width="100%" align="center">' |
| print ('<textarea rows="4" style="width:97%" readonly="true" wrap="off">' |
| + qe(description) + '</textarea>') |
| print '</td></tr></table>' |
| |
| def output_xhtml(lines, oldest_revision, newest_revision, ignored_revision_data_points, |
| regressions, requested_width, requested_height, title): |
| """Outputs an svg/xhtml view of the data.""" |
| print '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"', |
| print '"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">' |
| print '<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">' |
| print '<head>' |
| print '<title>%s</title>' % qe(title) |
| print '</head>' |
| print '<body>' |
| |
| output_svg(lines, regressions, requested_width, requested_height) |
| |
| #output the manipulation controls |
| print """ |
| <script type="text/javascript">//<![CDATA[ |
| function getElementsByClass(node, searchClass, tag) { |
| var classElements = new Array(); |
| var elements = node.getElementsByTagName(tag); |
| var pattern = new RegExp("^|\\s"+searchClass+"\\s|$"); |
| for (var i = 0, elementsFound = 0; i < elements.length; ++i) { |
| if (pattern.test(elements[i].className)) { |
| classElements[elementsFound] = elements[i]; |
| ++elementsFound; |
| } |
| } |
| return classElements; |
| } |
| function getAllLines() { |
| var selectElem = document.getElementById('benchSelect'); |
| var linesObj = {}; |
| for (var i = 0; i < selectElem.options.length; ++i) { |
| var lines = JSON.parse(selectElem.options[i].value); |
| for (var j = 0; j < lines.length; ++j) { |
| linesObj[lines[j]] = true; |
| } |
| } |
| return linesObj; |
| } |
| function getOptions(selectElem) { |
| var linesSelectedObj = {}; |
| for (var i = 0; i < selectElem.options.length; ++i) { |
| if (!selectElem.options[i].selected) continue; |
| |
| var linesSelected = JSON.parse(selectElem.options[i].value); |
| for (var j = 0; j < linesSelected.length; ++j) { |
| linesSelectedObj[linesSelected[j]] = true; |
| } |
| } |
| return linesSelectedObj; |
| } |
| function objectEmpty(obj) { |
| for (var p in obj) { |
| return false; |
| } |
| return true; |
| } |
| function markSelectedLines(selectElem, allLines) { |
| var linesSelected = getOptions(selectElem); |
| if (!objectEmpty(linesSelected)) { |
| for (var line in allLines) { |
| allLines[line] &= (linesSelected[line] == true); |
| } |
| } |
| } |
| function updateSvg() { |
| var allLines = getAllLines(); |
| |
| var selects = getElementsByClass(document, 'lines', 'select'); |
| for (var i = 0; i < selects.length; ++i) { |
| markSelectedLines(selects[i], allLines); |
| } |
| |
| for (var line in allLines) { |
| var svgLine = document.getElementById(line); |
| var display = (allLines[line] ? 'inline' : 'none'); |
| svgLine.setAttributeNS(null,'display', display); |
| } |
| } |
| |
| function mark(markerId) { |
| for (var line in getAllLines()) { |
| var svgLineGroup = document.getElementById(line); |
| var display = svgLineGroup.getAttributeNS(null,'display'); |
| if (display == null || display == "" || display != "none") { |
| var svgLine = document.getElementById(line+'_line'); |
| if (markerId == null) { |
| svgLine.removeAttributeNS(null,'marker-mid'); |
| } else { |
| svgLine.setAttributeNS(null,'marker-mid', markerId); |
| } |
| } |
| } |
| } |
| //]]></script>""" |
| |
| all_settings = {} |
| variant_settings = set() |
| for label in lines.keys(): |
| for key, value in label.settings.items(): |
| if key not in all_settings: |
| all_settings[key] = value |
| elif all_settings[key] != value: |
| variant_settings.add(key) |
| |
| print '<table border="0" width="%s">' % requested_width |
| #output column headers |
| print """ |
| <tr valign="top"><td width="50%"> |
| <table border="0" width="100%"> |
| <tr><td align="center"><table border="0"> |
| <form> |
| <tr valign="bottom" align="center"> |
| <td width="1">Bench Type</td> |
| <td width="1">Bitmap Config</td> |
| <td width="1">Timer Type (Cpu/Gpu/wall)</td> |
| """ |
| |
| for k in variant_settings: |
| print '<td width="1">%s</td>' % qe(k) |
| |
| print '<td width="1"><!--buttons--></td></tr>' |
| |
| #output column contents |
| print '<tr valign="top" align="center">' |
| print '<td width="1">' |
| create_select(lambda l: l.bench, lines, 'benchSelect') |
| print '</td><td width="1">' |
| create_select(lambda l: l.config, lines) |
| print '</td><td width="1">' |
| create_select(lambda l: l.time_type, lines) |
| |
| for k in variant_settings: |
| print '</td><td width="1">' |
| create_select(lambda l: l.settings.get(k, " "), lines) |
| |
| print '</td><td width="1"><button type="button"', |
| print 'onclick=%s' % qa("mark('url(#circleMark)'); return false;"), |
| print '>Mark Points</button>' |
| print '<button type="button" onclick="mark(null);">Clear Points</button>' |
| print '</td>' |
| print """ |
| </tr> |
| </form> |
| </table></td></tr> |
| <tr><td align="center"> |
| <hr /> |
| """ |
| |
| output_ignored_data_points_warning(ignored_revision_data_points) |
| print '</td></tr></table>' |
| print '</td><td width="2%"><!--gutter--></td>' |
| |
| print '<td><table border="0">' |
| print '<tr><td align="center">%s<br></br>revisions r%s - r%s</td></tr>' % ( |
| qe(title), |
| bench_util.CreateRevisionLink(oldest_revision), |
| bench_util.CreateRevisionLink(newest_revision)) |
| print """ |
| <tr><td align="left"> |
| <p>Brighter red indicates tests that have gotten worse; brighter green |
| indicates tests that have gotten better.</p> |
| <p>To highlight individual tests, hold down CONTROL and mouse over |
| graph lines.</p> |
| <p>To highlight revision numbers, hold down SHIFT and mouse over |
| the graph area.</p> |
| <p>To only show certain tests on the graph, select any combination of |
| tests in the selectors at left. (To show all, select all.)</p> |
| <p>Use buttons at left to mark/clear points on the lines for selected |
| benchmarks.</p> |
| </td></tr> |
| </table> |
| |
| </td> |
| </tr> |
| </table> |
| </body> |
| </html>""" |
| |
| def compute_size(requested_width, requested_height, rev_width, time_height): |
| """Converts potentially empty requested size into a concrete size. |
| |
| (Number?, Number?) -> (Number, Number)""" |
| pic_width = 0 |
| pic_height = 0 |
| if (requested_width is not None and requested_height is not None): |
| pic_height = requested_height |
| pic_width = requested_width |
| |
| elif (requested_width is not None): |
| pic_width = requested_width |
| pic_height = pic_width * (float(time_height) / rev_width) |
| |
| elif (requested_height is not None): |
| pic_height = requested_height |
| pic_width = pic_height * (float(rev_width) / time_height) |
| |
| else: |
| pic_height = 800 |
| pic_width = max(rev_width*3 |
| , pic_height * (float(rev_width) / time_height)) |
| |
| return (pic_width, pic_height) |
| |
| def output_svg(lines, regressions, requested_width, requested_height): |
| """Outputs an svg view of the data.""" |
| |
| (global_min_x, _), (global_max_x, global_max_y) = bounds(lines) |
| max_up_slope, min_down_slope = bounds_slope(regressions) |
| |
| #output |
| global_min_y = 0 |
| x = global_min_x |
| y = global_min_y |
| w = global_max_x - global_min_x |
| h = global_max_y - global_min_y |
| font_size = 16 |
| line_width = 2 |
| |
| # If there is nothing to see, don't try to draw anything. |
| if w == 0 or h == 0: |
| return |
| |
| pic_width, pic_height = compute_size(requested_width, requested_height |
| , w, h) |
| |
| def cw(w1): |
| """Converts a revision difference to display width.""" |
| return (pic_width / float(w)) * w1 |
| def cx(x): |
| """Converts a revision to a horizontal display position.""" |
| return cw(x - global_min_x) |
| |
| def ch(h1): |
| """Converts a time difference to a display height.""" |
| return -(pic_height / float(h)) * h1 |
| def cy(y): |
| """Converts a time to a vertical display position.""" |
| return pic_height + ch(y - global_min_y) |
| |
| print '<!--Picture height %.2f corresponds to bench value %.2f.-->' % ( |
| pic_height, h) |
| print '<svg', |
| print 'width=%s' % qa(str(pic_width)+'px') |
| print 'height=%s' % qa(str(pic_height)+'px') |
| print 'viewBox="0 0 %s %s"' % (str(pic_width), str(pic_height)) |
| print 'onclick=%s' % qa( |
| "var event = arguments[0] || window.event;" |
| " if (event.shiftKey) { highlightRevision(null); }" |
| " if (event.ctrlKey) { highlight(null); }" |
| " return false;") |
| print 'xmlns="http://www.w3.org/2000/svg"' |
| print 'xmlns:xlink="http://www.w3.org/1999/xlink">' |
| |
| print """ |
| <defs> |
| <marker id="circleMark" |
| viewBox="0 0 2 2" refX="1" refY="1" |
| markerUnits="strokeWidth" |
| markerWidth="2" markerHeight="2" |
| orient="0"> |
| <circle cx="1" cy="1" r="1"/> |
| </marker> |
| </defs>""" |
| |
| #output the revisions |
| print """ |
| <script type="text/javascript">//<![CDATA[ |
| var previousRevision; |
| var previousRevisionFill; |
| var previousRevisionStroke |
| function highlightRevision(id) { |
| if (previousRevision == id) return; |
| |
| document.getElementById('revision').firstChild.nodeValue = 'r' + id; |
| document.getElementById('rev_link').setAttribute('xlink:href', |
| 'http://code.google.com/p/skia/source/detail?r=' + id); |
| |
| var preRevision = document.getElementById(previousRevision); |
| if (preRevision) { |
| preRevision.setAttributeNS(null,'fill', previousRevisionFill); |
| preRevision.setAttributeNS(null,'stroke', previousRevisionStroke); |
| } |
| |
| var revision = document.getElementById(id); |
| previousRevision = id; |
| if (revision) { |
| previousRevisionFill = revision.getAttributeNS(null,'fill'); |
| revision.setAttributeNS(null,'fill','rgb(100%, 95%, 95%)'); |
| |
| previousRevisionStroke = revision.getAttributeNS(null,'stroke'); |
| revision.setAttributeNS(null,'stroke','rgb(100%, 90%, 90%)'); |
| } |
| } |
| //]]></script>""" |
| |
| def print_rect(x, y, w, h, revision): |
| """Outputs a revision rectangle in display space, |
| taking arguments in revision space.""" |
| disp_y = cy(y) |
| disp_h = ch(h) |
| if disp_h < 0: |
| disp_y += disp_h |
| disp_h = -disp_h |
| |
| print '<rect id=%s x=%s y=%s' % (qa(revision), qa(cx(x)), qa(disp_y),), |
| print 'width=%s height=%s' % (qa(cw(w)), qa(disp_h),), |
| print 'fill="white"', |
| print 'stroke="rgb(98%%,98%%,88%%)" stroke-width=%s' % qa(line_width), |
| print 'onmouseover=%s' % qa( |
| "var event = arguments[0] || window.event;" |
| " if (event.shiftKey) {" |
| " highlightRevision('"+str(revision)+"');" |
| " return false;" |
| " }"), |
| print ' />' |
| |
| xes = set() |
| for line in lines.itervalues(): |
| for point in line: |
| xes.add(point[0]) |
| revisions = list(xes) |
| revisions.sort() |
| |
| left = x |
| current_revision = revisions[0] |
| for next_revision in revisions[1:]: |
| width = (((next_revision - current_revision) / 2.0) |
| + (current_revision - left)) |
| print_rect(left, y, width, h, current_revision) |
| left += width |
| current_revision = next_revision |
| print_rect(left, y, x+w - left, h, current_revision) |
| |
| #output the lines |
| print """ |
| <script type="text/javascript">//<![CDATA[ |
| var previous; |
| var previousColor; |
| var previousOpacity; |
| function highlight(id) { |
| if (previous == id) return; |
| |
| document.getElementById('label').firstChild.nodeValue = id; |
| |
| var preGroup = document.getElementById(previous); |
| if (preGroup) { |
| var preLine = document.getElementById(previous+'_line'); |
| preLine.setAttributeNS(null,'stroke', previousColor); |
| preLine.setAttributeNS(null,'opacity', previousOpacity); |
| |
| var preSlope = document.getElementById(previous+'_linear'); |
| if (preSlope) { |
| preSlope.setAttributeNS(null,'visibility', 'hidden'); |
| } |
| } |
| |
| var group = document.getElementById(id); |
| previous = id; |
| if (group) { |
| group.parentNode.appendChild(group); |
| |
| var line = document.getElementById(id+'_line'); |
| previousColor = line.getAttributeNS(null,'stroke'); |
| previousOpacity = line.getAttributeNS(null,'opacity'); |
| line.setAttributeNS(null,'stroke', 'blue'); |
| line.setAttributeNS(null,'opacity', '1'); |
| |
| var slope = document.getElementById(id+'_linear'); |
| if (slope) { |
| slope.setAttributeNS(null,'visibility', 'visible'); |
| } |
| } |
| } |
| //]]></script>""" |
| |
| # Add a new element to each item in the 'lines' list: the label in string |
| # form. Then use that element to sort the list. |
| sorted_lines = [] |
| for label, line in lines.items(): |
| sorted_lines.append([str(label), label, line]) |
| sorted_lines.sort() |
| |
| for label_as_string, label, line in sorted_lines: |
| print '<g id=%s>' % qa(label_as_string) |
| r = 128 |
| g = 128 |
| b = 128 |
| a = .10 |
| if label in regressions: |
| regression = regressions[label] |
| min_slope = regression.find_min_slope() |
| if min_slope < 0: |
| d = max(0, (min_slope / min_down_slope)) |
| g += int(d*128) |
| a += d*0.9 |
| elif min_slope > 0: |
| d = max(0, (min_slope / max_up_slope)) |
| r += int(d*128) |
| a += d*0.9 |
| |
| slope = regression.slope |
| intercept = regression.intercept |
| min_x = regression.min_x |
| max_x = regression.max_x |
| print '<polyline id=%s' % qa(str(label)+'_linear'), |
| print 'fill="none" stroke="yellow"', |
| print 'stroke-width=%s' % qa(abs(ch(regression.serror*2))), |
| print 'opacity="0.5" pointer-events="none" visibility="hidden"', |
| print 'points="', |
| print '%s,%s' % (str(cx(min_x)), str(cy(slope*min_x + intercept))), |
| print '%s,%s' % (str(cx(max_x)), str(cy(slope*max_x + intercept))), |
| print '"/>' |
| |
| print '<polyline id=%s' % qa(str(label)+'_line'), |
| print 'onmouseover=%s' % qa( |
| "var event = arguments[0] || window.event;" |
| " if (event.ctrlKey) {" |
| " highlight('"+str(label).replace("'", "\\'")+"');" |
| " return false;" |
| " }"), |
| print 'fill="none" stroke="rgb(%s,%s,%s)"' % (str(r), str(g), str(b)), |
| print 'stroke-width=%s' % qa(line_width), |
| print 'opacity=%s' % qa(a), |
| print 'points="', |
| for point in line: |
| print '%s,%s' % (str(cx(point[0])), str(cy(point[1]))), |
| print '"/>' |
| |
| print '</g>' |
| |
| #output the labels |
| print '<text id="label" x="0" y=%s' % qa(font_size), |
| print 'font-size=%s> </text>' % qa(font_size) |
| |
| print '<a id="rev_link" xlink:href="" target="_top">' |
| print '<text id="revision" x="0" y=%s style="' % qa(font_size*2) |
| print 'font-size: %s; ' % qe(font_size) |
| print 'stroke: #0000dd; text-decoration: underline; ' |
| print '"> </text></a>' |
| |
| print '</svg>' |
| |
| if __name__ == "__main__": |
| main() |