| /* |
| * Copyright 2006 The Android Open Source Project |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| |
| #include "SkScanPriv.h" |
| #include "SkPath.h" |
| #include "SkMatrix.h" |
| #include "SkBlitter.h" |
| #include "SkRegion.h" |
| #include "SkAntiRun.h" |
| |
| #define SHIFT 2 |
| #define SCALE (1 << SHIFT) |
| #define MASK (SCALE - 1) |
| |
| /** @file |
| We have two techniques for capturing the output of the supersampler: |
| - SUPERMASK, which records a large mask-bitmap |
| this is often faster for small, complex objects |
| - RLE, which records a rle-encoded scanline |
| this is often faster for large objects with big spans |
| |
| These blitters use two coordinate systems: |
| - destination coordinates, scale equal to the output - often |
| abbreviated with 'i' or 'I' in variable names |
| - supersampled coordinates, scale equal to the output * SCALE |
| */ |
| |
| //#define FORCE_SUPERMASK |
| //#define FORCE_RLE |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| /// Base class for a single-pass supersampled blitter. |
| class BaseSuperBlitter : public SkBlitter { |
| public: |
| BaseSuperBlitter(SkBlitter* realBlitter, const SkIRect& ir, |
| const SkIRect& clipBounds, bool isInverse); |
| |
| /// Must be explicitly defined on subclasses. |
| virtual void blitAntiH(int x, int y, const SkAlpha antialias[], |
| const int16_t runs[]) override { |
| SkDEBUGFAIL("How did I get here?"); |
| } |
| /// May not be called on BaseSuperBlitter because it blits out of order. |
| void blitV(int x, int y, int height, SkAlpha alpha) override { |
| SkDEBUGFAIL("How did I get here?"); |
| } |
| |
| protected: |
| SkBlitter* fRealBlitter; |
| /// Current y coordinate, in destination coordinates. |
| int fCurrIY; |
| /// Widest row of region to be blitted, in destination coordinates. |
| int fWidth; |
| /// Leftmost x coordinate in any row, in destination coordinates. |
| int fLeft; |
| /// Leftmost x coordinate in any row, in supersampled coordinates. |
| int fSuperLeft; |
| |
| SkDEBUGCODE(int fCurrX;) |
| /// Current y coordinate in supersampled coordinates. |
| int fCurrY; |
| /// Initial y coordinate (top of bounds). |
| int fTop; |
| |
| SkIRect fSectBounds; |
| }; |
| |
| BaseSuperBlitter::BaseSuperBlitter(SkBlitter* realBlit, const SkIRect& ir, |
| const SkIRect& clipBounds, bool isInverse) { |
| fRealBlitter = realBlit; |
| |
| SkIRect sectBounds; |
| if (isInverse) { |
| // We use the clip bounds instead of the ir, since we may be asked to |
| //draw outside of the rect when we're a inverse filltype |
| sectBounds = clipBounds; |
| } else { |
| if (!sectBounds.intersect(ir, clipBounds)) { |
| sectBounds.setEmpty(); |
| } |
| } |
| |
| const int left = sectBounds.left(); |
| const int right = sectBounds.right(); |
| |
| fLeft = left; |
| fSuperLeft = SkLeftShift(left, SHIFT); |
| fWidth = right - left; |
| fTop = sectBounds.top(); |
| fCurrIY = fTop - 1; |
| fCurrY = SkLeftShift(fTop, SHIFT) - 1; |
| |
| SkDEBUGCODE(fCurrX = -1;) |
| } |
| |
| /// Run-length-encoded supersampling antialiased blitter. |
| class SuperBlitter : public BaseSuperBlitter { |
| public: |
| SuperBlitter(SkBlitter* realBlitter, const SkIRect& ir, const SkIRect& clipBounds, |
| bool isInverse); |
| |
| ~SuperBlitter() override { |
| this->flush(); |
| } |
| |
| /// Once fRuns contains a complete supersampled row, flush() blits |
| /// it out through the wrapped blitter. |
| void flush(); |
| |
| /// Blits a row of pixels, with location and width specified |
| /// in supersampled coordinates. |
| void blitH(int x, int y, int width) override; |
| /// Blits a rectangle of pixels, with location and size specified |
| /// in supersampled coordinates. |
| void blitRect(int x, int y, int width, int height) override; |
| |
| private: |
| // The next three variables are used to track a circular buffer that |
| // contains the values used in SkAlphaRuns. These variables should only |
| // ever be updated in advanceRuns(), and fRuns should always point to |
| // a valid SkAlphaRuns... |
| int fRunsToBuffer; |
| void* fRunsBuffer; |
| int fCurrentRun; |
| SkAlphaRuns fRuns; |
| |
| // extra one to store the zero at the end |
| int getRunsSz() const { return (fWidth + 1 + (fWidth + 2)/2) * sizeof(int16_t); } |
| |
| // This function updates the fRuns variable to point to the next buffer space |
| // with adequate storage for a SkAlphaRuns. It mostly just advances fCurrentRun |
| // and resets fRuns to point to an empty scanline. |
| void advanceRuns() { |
| const size_t kRunsSz = this->getRunsSz(); |
| fCurrentRun = (fCurrentRun + 1) % fRunsToBuffer; |
| fRuns.fRuns = reinterpret_cast<int16_t*>( |
| reinterpret_cast<uint8_t*>(fRunsBuffer) + fCurrentRun * kRunsSz); |
| fRuns.fAlpha = reinterpret_cast<SkAlpha*>(fRuns.fRuns + fWidth + 1); |
| fRuns.reset(fWidth); |
| } |
| |
| int fOffsetX; |
| }; |
| |
| SuperBlitter::SuperBlitter(SkBlitter* realBlitter, const SkIRect& ir, const SkIRect& clipBounds, |
| bool isInverse) |
| : BaseSuperBlitter(realBlitter, ir, clipBounds, isInverse) |
| { |
| fRunsToBuffer = realBlitter->requestRowsPreserved(); |
| fRunsBuffer = realBlitter->allocBlitMemory(fRunsToBuffer * this->getRunsSz()); |
| fCurrentRun = -1; |
| |
| this->advanceRuns(); |
| |
| fOffsetX = 0; |
| } |
| |
| void SuperBlitter::flush() { |
| if (fCurrIY >= fTop) { |
| |
| SkASSERT(fCurrentRun < fRunsToBuffer); |
| if (!fRuns.empty()) { |
| // SkDEBUGCODE(fRuns.dump();) |
| fRealBlitter->blitAntiH(fLeft, fCurrIY, fRuns.fAlpha, fRuns.fRuns); |
| this->advanceRuns(); |
| fOffsetX = 0; |
| } |
| |
| fCurrIY = fTop - 1; |
| SkDEBUGCODE(fCurrX = -1;) |
| } |
| } |
| |
| /** coverage_to_partial_alpha() is being used by SkAlphaRuns, which |
| *accumulates* SCALE pixels worth of "alpha" in [0,(256/SCALE)] |
| to produce a final value in [0, 255] and handles clamping 256->255 |
| itself, with the same (alpha - (alpha >> 8)) correction as |
| coverage_to_exact_alpha(). |
| */ |
| static inline int coverage_to_partial_alpha(int aa) { |
| aa <<= 8 - 2*SHIFT; |
| return aa; |
| } |
| |
| /** coverage_to_exact_alpha() is being used by our blitter, which wants |
| a final value in [0, 255]. |
| */ |
| static inline int coverage_to_exact_alpha(int aa) { |
| int alpha = (256 >> SHIFT) * aa; |
| // clamp 256->255 |
| return alpha - (alpha >> 8); |
| } |
| |
| void SuperBlitter::blitH(int x, int y, int width) { |
| SkASSERT(width > 0); |
| |
| int iy = y >> SHIFT; |
| SkASSERT(iy >= fCurrIY); |
| |
| x -= fSuperLeft; |
| // hack, until I figure out why my cubics (I think) go beyond the bounds |
| if (x < 0) { |
| width += x; |
| x = 0; |
| } |
| |
| #ifdef SK_DEBUG |
| SkASSERT(y != fCurrY || x >= fCurrX); |
| #endif |
| SkASSERT(y >= fCurrY); |
| if (fCurrY != y) { |
| fOffsetX = 0; |
| fCurrY = y; |
| } |
| |
| if (iy != fCurrIY) { // new scanline |
| this->flush(); |
| fCurrIY = iy; |
| } |
| |
| int start = x; |
| int stop = x + width; |
| |
| SkASSERT(start >= 0 && stop > start); |
| // integer-pixel-aligned ends of blit, rounded out |
| int fb = start & MASK; |
| int fe = stop & MASK; |
| int n = (stop >> SHIFT) - (start >> SHIFT) - 1; |
| |
| if (n < 0) { |
| fb = fe - fb; |
| n = 0; |
| fe = 0; |
| } else { |
| if (fb == 0) { |
| n += 1; |
| } else { |
| fb = SCALE - fb; |
| } |
| } |
| |
| fOffsetX = fRuns.add(x >> SHIFT, coverage_to_partial_alpha(fb), |
| n, coverage_to_partial_alpha(fe), |
| (1 << (8 - SHIFT)) - (((y & MASK) + 1) >> SHIFT), |
| fOffsetX); |
| |
| #ifdef SK_DEBUG |
| fRuns.assertValid(y & MASK, (1 << (8 - SHIFT))); |
| fCurrX = x + width; |
| #endif |
| } |
| |
| #if 0 // UNUSED |
| static void set_left_rite_runs(SkAlphaRuns& runs, int ileft, U8CPU leftA, |
| int n, U8CPU riteA) { |
| SkASSERT(leftA <= 0xFF); |
| SkASSERT(riteA <= 0xFF); |
| |
| int16_t* run = runs.fRuns; |
| uint8_t* aa = runs.fAlpha; |
| |
| if (ileft > 0) { |
| run[0] = ileft; |
| aa[0] = 0; |
| run += ileft; |
| aa += ileft; |
| } |
| |
| SkASSERT(leftA < 0xFF); |
| if (leftA > 0) { |
| *run++ = 1; |
| *aa++ = leftA; |
| } |
| |
| if (n > 0) { |
| run[0] = n; |
| aa[0] = 0xFF; |
| run += n; |
| aa += n; |
| } |
| |
| SkASSERT(riteA < 0xFF); |
| if (riteA > 0) { |
| *run++ = 1; |
| *aa++ = riteA; |
| } |
| run[0] = 0; |
| } |
| #endif |
| |
| void SuperBlitter::blitRect(int x, int y, int width, int height) { |
| SkASSERT(width > 0); |
| SkASSERT(height > 0); |
| |
| // blit leading rows |
| while ((y & MASK)) { |
| this->blitH(x, y++, width); |
| if (--height <= 0) { |
| return; |
| } |
| } |
| SkASSERT(height > 0); |
| |
| // Since this is a rect, instead of blitting supersampled rows one at a |
| // time and then resolving to the destination canvas, we can blit |
| // directly to the destintion canvas one row per SCALE supersampled rows. |
| int start_y = y >> SHIFT; |
| int stop_y = (y + height) >> SHIFT; |
| int count = stop_y - start_y; |
| if (count > 0) { |
| y += count << SHIFT; |
| height -= count << SHIFT; |
| |
| // save original X for our tail blitH() loop at the bottom |
| int origX = x; |
| |
| x -= fSuperLeft; |
| // hack, until I figure out why my cubics (I think) go beyond the bounds |
| if (x < 0) { |
| width += x; |
| x = 0; |
| } |
| |
| // There is always a left column, a middle, and a right column. |
| // ileft is the destination x of the first pixel of the entire rect. |
| // xleft is (SCALE - # of covered supersampled pixels) in that |
| // destination pixel. |
| int ileft = x >> SHIFT; |
| int xleft = x & MASK; |
| // irite is the destination x of the last pixel of the OPAQUE section. |
| // xrite is the number of supersampled pixels extending beyond irite; |
| // xrite/SCALE should give us alpha. |
| int irite = (x + width) >> SHIFT; |
| int xrite = (x + width) & MASK; |
| if (!xrite) { |
| xrite = SCALE; |
| irite--; |
| } |
| |
| // Need to call flush() to clean up pending draws before we |
| // even consider blitV(), since otherwise it can look nonmonotonic. |
| SkASSERT(start_y > fCurrIY); |
| this->flush(); |
| |
| int n = irite - ileft - 1; |
| if (n < 0) { |
| // If n < 0, we'll only have a single partially-transparent column |
| // of pixels to render. |
| xleft = xrite - xleft; |
| SkASSERT(xleft <= SCALE); |
| SkASSERT(xleft > 0); |
| fRealBlitter->blitV(ileft + fLeft, start_y, count, |
| coverage_to_exact_alpha(xleft)); |
| } else { |
| // With n = 0, we have two possibly-transparent columns of pixels |
| // to render; with n > 0, we have opaque columns between them. |
| |
| xleft = SCALE - xleft; |
| |
| // Using coverage_to_exact_alpha is not consistent with blitH() |
| const int coverageL = coverage_to_exact_alpha(xleft); |
| const int coverageR = coverage_to_exact_alpha(xrite); |
| |
| SkASSERT(coverageL > 0 || n > 0 || coverageR > 0); |
| SkASSERT((coverageL != 0) + n + (coverageR != 0) <= fWidth); |
| |
| fRealBlitter->blitAntiRect(ileft + fLeft, start_y, n, count, |
| coverageL, coverageR); |
| } |
| |
| // preamble for our next call to blitH() |
| fCurrIY = stop_y - 1; |
| fOffsetX = 0; |
| fCurrY = y - 1; |
| fRuns.reset(fWidth); |
| x = origX; |
| } |
| |
| // catch any remaining few rows |
| SkASSERT(height <= MASK); |
| while (--height >= 0) { |
| this->blitH(x, y++, width); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| /// Masked supersampling antialiased blitter. |
| class MaskSuperBlitter : public BaseSuperBlitter { |
| public: |
| MaskSuperBlitter(SkBlitter* realBlitter, const SkIRect& ir, const SkIRect&, bool isInverse); |
| ~MaskSuperBlitter() override { |
| fRealBlitter->blitMask(fMask, fClipRect); |
| } |
| |
| void blitH(int x, int y, int width) override; |
| |
| static bool CanHandleRect(const SkIRect& bounds) { |
| #ifdef FORCE_RLE |
| return false; |
| #endif |
| int width = bounds.width(); |
| int64_t rb = SkAlign4(width); |
| // use 64bits to detect overflow |
| int64_t storage = rb * bounds.height(); |
| |
| return (width <= MaskSuperBlitter::kMAX_WIDTH) && |
| (storage <= MaskSuperBlitter::kMAX_STORAGE); |
| } |
| |
| private: |
| enum { |
| #ifdef FORCE_SUPERMASK |
| kMAX_WIDTH = 2048, |
| kMAX_STORAGE = 1024 * 1024 * 2 |
| #else |
| kMAX_WIDTH = 32, // so we don't try to do very wide things, where the RLE blitter would be faster |
| kMAX_STORAGE = 1024 |
| #endif |
| }; |
| |
| SkMask fMask; |
| SkIRect fClipRect; |
| // we add 1 because add_aa_span can write (unchanged) 1 extra byte at the end, rather than |
| // perform a test to see if stopAlpha != 0 |
| uint32_t fStorage[(kMAX_STORAGE >> 2) + 1]; |
| }; |
| |
| MaskSuperBlitter::MaskSuperBlitter(SkBlitter* realBlitter, const SkIRect& ir, |
| const SkIRect& clipBounds, bool isInverse) |
| : BaseSuperBlitter(realBlitter, ir, clipBounds, isInverse) |
| { |
| SkASSERT(CanHandleRect(ir)); |
| SkASSERT(!isInverse); |
| |
| fMask.fImage = (uint8_t*)fStorage; |
| fMask.fBounds = ir; |
| fMask.fRowBytes = ir.width(); |
| fMask.fFormat = SkMask::kA8_Format; |
| |
| fClipRect = ir; |
| if (!fClipRect.intersect(clipBounds)) { |
| SkASSERT(0); |
| fClipRect.setEmpty(); |
| } |
| |
| // For valgrind, write 1 extra byte at the end so we don't read |
| // uninitialized memory. See comment in add_aa_span and fStorage[]. |
| memset(fStorage, 0, fMask.fBounds.height() * fMask.fRowBytes + 1); |
| } |
| |
| static void add_aa_span(uint8_t* alpha, U8CPU startAlpha) { |
| /* I should be able to just add alpha[x] + startAlpha. |
| However, if the trailing edge of the previous span and the leading |
| edge of the current span round to the same super-sampled x value, |
| I might overflow to 256 with this add, hence the funny subtract. |
| */ |
| unsigned tmp = *alpha + startAlpha; |
| SkASSERT(tmp <= 256); |
| *alpha = SkToU8(tmp - (tmp >> 8)); |
| } |
| |
| static inline uint32_t quadplicate_byte(U8CPU value) { |
| uint32_t pair = (value << 8) | value; |
| return (pair << 16) | pair; |
| } |
| |
| // Perform this tricky subtract, to avoid overflowing to 256. Our caller should |
| // only ever call us with at most enough to hit 256 (never larger), so it is |
| // enough to just subtract the high-bit. Actually clamping with a branch would |
| // be slower (e.g. if (tmp > 255) tmp = 255;) |
| // |
| static inline void saturated_add(uint8_t* ptr, U8CPU add) { |
| unsigned tmp = *ptr + add; |
| SkASSERT(tmp <= 256); |
| *ptr = SkToU8(tmp - (tmp >> 8)); |
| } |
| |
| // minimum count before we want to setup an inner loop, adding 4-at-a-time |
| #define MIN_COUNT_FOR_QUAD_LOOP 16 |
| |
| static void add_aa_span(uint8_t* alpha, U8CPU startAlpha, int middleCount, |
| U8CPU stopAlpha, U8CPU maxValue) { |
| SkASSERT(middleCount >= 0); |
| |
| saturated_add(alpha, startAlpha); |
| alpha += 1; |
| |
| if (middleCount >= MIN_COUNT_FOR_QUAD_LOOP) { |
| // loop until we're quad-byte aligned |
| while (SkTCast<intptr_t>(alpha) & 0x3) { |
| alpha[0] = SkToU8(alpha[0] + maxValue); |
| alpha += 1; |
| middleCount -= 1; |
| } |
| |
| int bigCount = middleCount >> 2; |
| uint32_t* qptr = reinterpret_cast<uint32_t*>(alpha); |
| uint32_t qval = quadplicate_byte(maxValue); |
| do { |
| *qptr++ += qval; |
| } while (--bigCount > 0); |
| |
| middleCount &= 3; |
| alpha = reinterpret_cast<uint8_t*> (qptr); |
| // fall through to the following while-loop |
| } |
| |
| while (--middleCount >= 0) { |
| alpha[0] = SkToU8(alpha[0] + maxValue); |
| alpha += 1; |
| } |
| |
| // potentially this can be off the end of our "legal" alpha values, but that |
| // only happens if stopAlpha is also 0. Rather than test for stopAlpha != 0 |
| // every time (slow), we just do it, and ensure that we've allocated extra space |
| // (see the + 1 comment in fStorage[] |
| saturated_add(alpha, stopAlpha); |
| } |
| |
| void MaskSuperBlitter::blitH(int x, int y, int width) { |
| int iy = (y >> SHIFT); |
| |
| SkASSERT(iy >= fMask.fBounds.fTop && iy < fMask.fBounds.fBottom); |
| iy -= fMask.fBounds.fTop; // make it relative to 0 |
| |
| // This should never happen, but it does. Until the true cause is |
| // discovered, let's skip this span instead of crashing. |
| // See http://crbug.com/17569. |
| if (iy < 0) { |
| return; |
| } |
| |
| #ifdef SK_DEBUG |
| { |
| int ix = x >> SHIFT; |
| SkASSERT(ix >= fMask.fBounds.fLeft && ix < fMask.fBounds.fRight); |
| } |
| #endif |
| |
| x -= SkLeftShift(fMask.fBounds.fLeft, SHIFT); |
| |
| // hack, until I figure out why my cubics (I think) go beyond the bounds |
| if (x < 0) { |
| width += x; |
| x = 0; |
| } |
| |
| uint8_t* row = fMask.fImage + iy * fMask.fRowBytes + (x >> SHIFT); |
| |
| int start = x; |
| int stop = x + width; |
| |
| SkASSERT(start >= 0 && stop > start); |
| int fb = start & MASK; |
| int fe = stop & MASK; |
| int n = (stop >> SHIFT) - (start >> SHIFT) - 1; |
| |
| |
| if (n < 0) { |
| SkASSERT(row >= fMask.fImage); |
| SkASSERT(row < fMask.fImage + kMAX_STORAGE + 1); |
| add_aa_span(row, coverage_to_partial_alpha(fe - fb)); |
| } else { |
| fb = SCALE - fb; |
| SkASSERT(row >= fMask.fImage); |
| SkASSERT(row + n + 1 < fMask.fImage + kMAX_STORAGE + 1); |
| add_aa_span(row, coverage_to_partial_alpha(fb), |
| n, coverage_to_partial_alpha(fe), |
| (1 << (8 - SHIFT)) - (((y & MASK) + 1) >> SHIFT)); |
| } |
| |
| #ifdef SK_DEBUG |
| fCurrX = x + width; |
| #endif |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| static bool ShouldUseDAA(const SkPath& path) { |
| if (gSkForceDeltaAA) { |
| return true; |
| } |
| if (!gSkUseDeltaAA) { |
| return false; |
| } |
| const SkRect& bounds = path.getBounds(); |
| return !path.isConvex() && path.countPoints() >= SkTMax(bounds.width(), bounds.height()) / 8; |
| } |
| |
| static bool ShouldUseAAA(const SkPath& path) { |
| if (gSkForceAnalyticAA) { |
| return true; |
| } |
| if (!gSkUseAnalyticAA) { |
| return false; |
| } |
| if (path.isRect(nullptr)) { |
| return true; |
| } |
| const SkRect& bounds = path.getBounds(); |
| // When the path have so many points compared to the size of its bounds/resolution, |
| // it indicates that the path is not quite smooth in the current resolution: |
| // the expected number of turning points in every pixel row/column is significantly greater than |
| // zero. Hence Aanlytic AA is not likely to produce visible quality improvements, and Analytic |
| // AA might be slower than supersampling. |
| return path.countPoints() < SkTMax(bounds.width(), bounds.height()) / 2 - 10; |
| } |
| |
| void SkScan::SAAFillPath(const SkPath& path, SkBlitter* blitter, const SkIRect& ir, |
| const SkIRect& clipBounds, bool containedInClip, bool forceRLE) { |
| #if !defined(SK_SUPPORT_LEGACY_AA_BEHAVIOR) |
| containedInClip = clipBounds.contains(ir); |
| #endif |
| |
| bool isInverse = path.isInverseFillType(); |
| |
| // MaskSuperBlitter can't handle drawing outside of ir, so we can't use it |
| // if we're an inverse filltype |
| if (!isInverse && MaskSuperBlitter::CanHandleRect(ir) && !forceRLE) { |
| MaskSuperBlitter superBlit(blitter, ir, clipBounds, isInverse); |
| SkASSERT(SkIntToScalar(ir.fTop) <= path.getBounds().fTop); |
| sk_fill_path(path, clipBounds, &superBlit, ir.fTop, ir.fBottom, SHIFT, containedInClip); |
| } else { |
| SuperBlitter superBlit(blitter, ir, clipBounds, isInverse); |
| sk_fill_path(path, clipBounds, &superBlit, ir.fTop, ir.fBottom, SHIFT, containedInClip); |
| } |
| } |
| |
| static bool fitsInsideLimit(const SkRect& r, SkScalar max) { |
| const SkScalar min = -max; |
| return r.fLeft > min && r.fTop > min && |
| r.fRight < max && r.fBottom < max; |
| } |
| |
| static int overflows_short_shift(int value, int shift) { |
| const int s = 16 + shift; |
| return (SkLeftShift(value, s) >> s) - value; |
| } |
| |
| /** |
| Would any of the coordinates of this rectangle not fit in a short, |
| when left-shifted by shift? |
| */ |
| static int rect_overflows_short_shift(SkIRect rect, int shift) { |
| SkASSERT(!overflows_short_shift(8191, shift)); |
| SkASSERT(overflows_short_shift(8192, shift)); |
| SkASSERT(!overflows_short_shift(32767, 0)); |
| SkASSERT(overflows_short_shift(32768, 0)); |
| |
| // Since we expect these to succeed, we bit-or together |
| // for a tiny extra bit of speed. |
| return overflows_short_shift(rect.fLeft, shift) | |
| overflows_short_shift(rect.fRight, shift) | |
| overflows_short_shift(rect.fTop, shift) | |
| overflows_short_shift(rect.fBottom, shift); |
| } |
| |
| static bool safeRoundOut(const SkRect& src, SkIRect* dst, int32_t maxInt) { |
| const SkScalar maxScalar = SkIntToScalar(maxInt); |
| |
| if (fitsInsideLimit(src, maxScalar)) { |
| src.roundOut(dst); |
| return true; |
| } |
| return false; |
| } |
| |
| void SkScan::AntiFillPath(const SkPath& path, const SkRegion& origClip, |
| SkBlitter* blitter, bool forceRLE, bool forceDAA) { |
| if (origClip.isEmpty()) { |
| return; |
| } |
| |
| const bool isInverse = path.isInverseFillType(); |
| SkIRect ir; |
| |
| if (!safeRoundOut(path.getBounds(), &ir, SK_MaxS32 >> SHIFT)) { |
| // Bounds can't fit in SkIRect; we'll return without drawing |
| return; |
| } |
| if (ir.isEmpty()) { |
| if (isInverse) { |
| blitter->blitRegion(origClip); |
| } |
| return; |
| } |
| |
| // If the intersection of the path bounds and the clip bounds |
| // will overflow 32767 when << by SHIFT, we can't supersample, |
| // so draw without antialiasing. |
| SkIRect clippedIR; |
| if (isInverse) { |
| // If the path is an inverse fill, it's going to fill the entire |
| // clip, and we care whether the entire clip exceeds our limits. |
| clippedIR = origClip.getBounds(); |
| } else { |
| if (!clippedIR.intersect(ir, origClip.getBounds())) { |
| return; |
| } |
| } |
| if (rect_overflows_short_shift(clippedIR, SHIFT)) { |
| SkScan::FillPath(path, origClip, blitter); |
| return; |
| } |
| |
| // Our antialiasing can't handle a clip larger than 32767, so we restrict |
| // the clip to that limit here. (the runs[] uses int16_t for its index). |
| // |
| // A more general solution (one that could also eliminate the need to |
| // disable aa based on ir bounds (see overflows_short_shift) would be |
| // to tile the clip/target... |
| SkRegion tmpClipStorage; |
| const SkRegion* clipRgn = &origClip; |
| { |
| static const int32_t kMaxClipCoord = 32767; |
| const SkIRect& bounds = origClip.getBounds(); |
| if (bounds.fRight > kMaxClipCoord || bounds.fBottom > kMaxClipCoord) { |
| SkIRect limit = { 0, 0, kMaxClipCoord, kMaxClipCoord }; |
| tmpClipStorage.op(origClip, limit, SkRegion::kIntersect_Op); |
| clipRgn = &tmpClipStorage; |
| } |
| } |
| // for here down, use clipRgn, not origClip |
| |
| SkScanClipper clipper(blitter, clipRgn, ir); |
| |
| if (clipper.getBlitter() == nullptr) { // clipped out |
| if (isInverse) { |
| blitter->blitRegion(*clipRgn); |
| } |
| return; |
| } |
| |
| SkASSERT(clipper.getClipRect() == nullptr || |
| *clipper.getClipRect() == clipRgn->getBounds()); |
| |
| // now use the (possibly wrapped) blitter |
| blitter = clipper.getBlitter(); |
| |
| if (isInverse) { |
| sk_blit_above(blitter, ir, *clipRgn); |
| } |
| |
| SkASSERT(SkIntToScalar(ir.fTop) <= path.getBounds().fTop); |
| |
| #ifdef SK_SUPPORT_LEGACY_CONTAINED_IN_CLIP |
| bool containedInClip = clipper.getClipRect() == nullptr; |
| #else |
| bool containedInClip = clipRgn->getBounds().contains(ir); |
| #endif |
| |
| if (forceDAA || ShouldUseDAA(path)) { |
| SkScan::DAAFillPath(path, blitter, ir, clipRgn->getBounds(), |
| containedInClip, forceRLE); |
| } else if (ShouldUseAAA(path)) { |
| // Do not use AAA if path is too complicated: |
| // there won't be any speedup or significant visual improvement. |
| SkScan::AAAFillPath(path, blitter, ir, clipRgn->getBounds(), |
| containedInClip, forceRLE); |
| } else { |
| SkScan::SAAFillPath(path, blitter, ir, clipRgn->getBounds(), |
| containedInClip, forceRLE); |
| } |
| |
| if (isInverse) { |
| sk_blit_below(blitter, ir, *clipRgn); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| #include "SkRasterClip.h" |
| |
| void SkScan::FillPath(const SkPath& path, const SkRasterClip& clip, |
| SkBlitter* blitter) { |
| if (clip.isEmpty()) { |
| return; |
| } |
| |
| if (clip.isBW()) { |
| FillPath(path, clip.bwRgn(), blitter); |
| } else { |
| SkRegion tmp; |
| SkAAClipBlitter aaBlitter; |
| |
| tmp.setRect(clip.getBounds()); |
| aaBlitter.init(blitter, &clip.aaRgn()); |
| SkScan::FillPath(path, tmp, &aaBlitter); |
| } |
| } |
| |
| void SkScan::AntiFillPath(const SkPath& path, const SkRasterClip& clip, |
| SkBlitter* blitter, bool forceDAA) { |
| if (clip.isEmpty()) { |
| return; |
| } |
| |
| if (clip.isBW()) { |
| AntiFillPath(path, clip.bwRgn(), blitter, false, forceDAA); |
| } else { |
| SkRegion tmp; |
| SkAAClipBlitter aaBlitter; |
| |
| tmp.setRect(clip.getBounds()); |
| aaBlitter.init(blitter, &clip.aaRgn()); |
| AntiFillPath(path, tmp, &aaBlitter, true, forceDAA); // SkAAClipBlitter can blitMask, why forceRLE? |
| } |
| } |