| /* |
| * Copyright 2013 Google Inc. |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "SkMutex.h" |
| #include "SkOpCoincidence.h" |
| #include "SkOpContour.h" |
| #include "SkOSFile.h" |
| #include "SkPath.h" |
| #include "SkPathOpsDebug.h" |
| #include "SkString.h" |
| |
| #include <utility> |
| |
| #if DEBUG_DUMP_VERIFY |
| bool SkPathOpsDebug::gDumpOp; // set to true to write op to file before a crash |
| bool SkPathOpsDebug::gVerifyOp; // set to true to compare result against regions |
| #endif |
| |
| bool SkPathOpsDebug::gRunFail; // set to true to check for success on tests known to fail |
| bool SkPathOpsDebug::gVeryVerbose; // set to true to run extensive checking tests |
| |
| #undef FAIL_IF |
| #define FAIL_IF(cond, coin) \ |
| do { if (cond) log->record(SkPathOpsDebug::kFail_Glitch, coin); } while (false) |
| |
| #undef FAIL_WITH_NULL_IF |
| #define FAIL_WITH_NULL_IF(cond, span) \ |
| do { if (cond) log->record(SkPathOpsDebug::kFail_Glitch, span); } while (false) |
| |
| #undef RETURN_FALSE_IF |
| #define RETURN_FALSE_IF(cond, span) \ |
| do { if (cond) log->record(SkPathOpsDebug::kReturnFalse_Glitch, span); \ |
| } while (false) |
| |
| class SkCoincidentSpans; |
| |
| #if DEBUG_SORT |
| int SkPathOpsDebug::gSortCountDefault = SK_MaxS32; |
| int SkPathOpsDebug::gSortCount; |
| #endif |
| |
| #if DEBUG_ACTIVE_OP |
| const char* SkPathOpsDebug::kPathOpStr[] = {"diff", "sect", "union", "xor", "rdiff"}; |
| #endif |
| |
| #if defined SK_DEBUG || !FORCE_RELEASE |
| |
| int SkPathOpsDebug::gContourID = 0; |
| int SkPathOpsDebug::gSegmentID = 0; |
| |
| bool SkPathOpsDebug::ChaseContains(const SkTDArray<SkOpSpanBase* >& chaseArray, |
| const SkOpSpanBase* span) { |
| for (int index = 0; index < chaseArray.count(); ++index) { |
| const SkOpSpanBase* entry = chaseArray[index]; |
| if (entry == span) { |
| return true; |
| } |
| } |
| return false; |
| } |
| #endif |
| |
| #if DEBUG_ACTIVE_SPANS |
| SkString SkPathOpsDebug::gActiveSpans; |
| #endif |
| |
| #if DEBUG_COIN |
| |
| SkPathOpsDebug::CoinDict SkPathOpsDebug::gCoinSumChangedDict; |
| SkPathOpsDebug::CoinDict SkPathOpsDebug::gCoinSumVisitedDict; |
| |
| static const int kGlitchType_Count = SkPathOpsDebug::kUnalignedTail_Glitch + 1; |
| |
| struct SpanGlitch { |
| const SkOpSpanBase* fBase; |
| const SkOpSpanBase* fSuspect; |
| const SkOpSegment* fSegment; |
| const SkOpSegment* fOppSegment; |
| const SkOpPtT* fCoinSpan; |
| const SkOpPtT* fEndSpan; |
| const SkOpPtT* fOppSpan; |
| const SkOpPtT* fOppEndSpan; |
| double fStartT; |
| double fEndT; |
| double fOppStartT; |
| double fOppEndT; |
| SkPoint fPt; |
| SkPathOpsDebug::GlitchType fType; |
| |
| void dumpType() const; |
| }; |
| |
| struct SkPathOpsDebug::GlitchLog { |
| void init(const SkOpGlobalState* state) { |
| fGlobalState = state; |
| } |
| |
| SpanGlitch* recordCommon(GlitchType type) { |
| SpanGlitch* glitch = fGlitches.push(); |
| glitch->fBase = nullptr; |
| glitch->fSuspect = nullptr; |
| glitch->fSegment = nullptr; |
| glitch->fOppSegment = nullptr; |
| glitch->fCoinSpan = nullptr; |
| glitch->fEndSpan = nullptr; |
| glitch->fOppSpan = nullptr; |
| glitch->fOppEndSpan = nullptr; |
| glitch->fStartT = SK_ScalarNaN; |
| glitch->fEndT = SK_ScalarNaN; |
| glitch->fOppStartT = SK_ScalarNaN; |
| glitch->fOppEndT = SK_ScalarNaN; |
| glitch->fPt = { SK_ScalarNaN, SK_ScalarNaN }; |
| glitch->fType = type; |
| return glitch; |
| } |
| |
| void record(GlitchType type, const SkOpSpanBase* base, |
| const SkOpSpanBase* suspect = NULL) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fBase = base; |
| glitch->fSuspect = suspect; |
| } |
| |
| void record(GlitchType type, const SkOpSpanBase* base, |
| const SkOpPtT* ptT) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fBase = base; |
| glitch->fCoinSpan = ptT; |
| } |
| |
| void record(GlitchType type, const SkCoincidentSpans* coin, |
| const SkCoincidentSpans* opp = NULL) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fCoinSpan = coin->coinPtTStart(); |
| glitch->fEndSpan = coin->coinPtTEnd(); |
| if (opp) { |
| glitch->fOppSpan = opp->coinPtTStart(); |
| glitch->fOppEndSpan = opp->coinPtTEnd(); |
| } |
| } |
| |
| void record(GlitchType type, const SkOpSpanBase* base, |
| const SkOpSegment* seg, double t, SkPoint pt) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fBase = base; |
| glitch->fSegment = seg; |
| glitch->fStartT = t; |
| glitch->fPt = pt; |
| } |
| |
| void record(GlitchType type, const SkOpSpanBase* base, double t, |
| SkPoint pt) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fBase = base; |
| glitch->fStartT = t; |
| glitch->fPt = pt; |
| } |
| |
| void record(GlitchType type, const SkCoincidentSpans* coin, |
| const SkOpPtT* coinSpan, const SkOpPtT* endSpan) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fCoinSpan = coin->coinPtTStart(); |
| glitch->fEndSpan = coin->coinPtTEnd(); |
| glitch->fEndSpan = endSpan; |
| glitch->fOppSpan = coinSpan; |
| glitch->fOppEndSpan = endSpan; |
| } |
| |
| void record(GlitchType type, const SkCoincidentSpans* coin, |
| const SkOpSpanBase* base) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fBase = base; |
| glitch->fCoinSpan = coin->coinPtTStart(); |
| glitch->fEndSpan = coin->coinPtTEnd(); |
| } |
| |
| void record(GlitchType type, const SkOpPtT* ptTS, const SkOpPtT* ptTE, |
| const SkOpPtT* oPtTS, const SkOpPtT* oPtTE) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fCoinSpan = ptTS; |
| glitch->fEndSpan = ptTE; |
| glitch->fOppSpan = oPtTS; |
| glitch->fOppEndSpan = oPtTE; |
| } |
| |
| void record(GlitchType type, const SkOpSegment* seg, double startT, |
| double endT, const SkOpSegment* oppSeg, double oppStartT, double oppEndT) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fSegment = seg; |
| glitch->fStartT = startT; |
| glitch->fEndT = endT; |
| glitch->fOppSegment = oppSeg; |
| glitch->fOppStartT = oppStartT; |
| glitch->fOppEndT = oppEndT; |
| } |
| |
| void record(GlitchType type, const SkOpSegment* seg, |
| const SkOpSpan* span) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fSegment = seg; |
| glitch->fBase = span; |
| } |
| |
| void record(GlitchType type, double t, const SkOpSpanBase* span) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fStartT = t; |
| glitch->fBase = span; |
| } |
| |
| void record(GlitchType type, const SkOpSegment* seg) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fSegment = seg; |
| } |
| |
| void record(GlitchType type, const SkCoincidentSpans* coin, |
| const SkOpPtT* ptT) { |
| SpanGlitch* glitch = recordCommon(type); |
| glitch->fCoinSpan = coin->coinPtTStart(); |
| glitch->fEndSpan = ptT; |
| } |
| |
| SkTDArray<SpanGlitch> fGlitches; |
| const SkOpGlobalState* fGlobalState; |
| }; |
| |
| |
| void SkPathOpsDebug::CoinDict::add(const SkPathOpsDebug::CoinDict& dict) { |
| int count = dict.fDict.count(); |
| for (int index = 0; index < count; ++index) { |
| this->add(dict.fDict[index]); |
| } |
| } |
| |
| void SkPathOpsDebug::CoinDict::add(const CoinDictEntry& key) { |
| int count = fDict.count(); |
| for (int index = 0; index < count; ++index) { |
| CoinDictEntry* entry = &fDict[index]; |
| if (entry->fIteration == key.fIteration && entry->fLineNumber == key.fLineNumber) { |
| SkASSERT(!strcmp(entry->fFunctionName, key.fFunctionName)); |
| if (entry->fGlitchType == kUninitialized_Glitch) { |
| entry->fGlitchType = key.fGlitchType; |
| } |
| return; |
| } |
| } |
| *fDict.append() = key; |
| } |
| |
| #endif |
| |
| #if DEBUG_COIN |
| static void missing_coincidence(SkPathOpsDebug::GlitchLog* glitches, const SkOpContourHead* contourList) { |
| const SkOpContour* contour = contourList; |
| // bool result = false; |
| do { |
| /* result |= */ contour->debugMissingCoincidence(glitches); |
| } while ((contour = contour->next())); |
| return; |
| } |
| |
| static void move_multiples(SkPathOpsDebug::GlitchLog* glitches, const SkOpContourHead* contourList) { |
| const SkOpContour* contour = contourList; |
| do { |
| if (contour->debugMoveMultiples(glitches), false) { |
| return; |
| } |
| } while ((contour = contour->next())); |
| return; |
| } |
| |
| static void move_nearby(SkPathOpsDebug::GlitchLog* glitches, const SkOpContourHead* contourList) { |
| const SkOpContour* contour = contourList; |
| do { |
| contour->debugMoveNearby(glitches); |
| } while ((contour = contour->next())); |
| } |
| |
| |
| #endif |
| |
| #if DEBUG_COIN |
| void SkOpGlobalState::debugAddToCoinChangedDict() { |
| |
| #if DEBUG_COINCIDENCE |
| SkPathOpsDebug::CheckHealth(fContourHead); |
| #endif |
| // see if next coincident operation makes a change; if so, record it |
| SkPathOpsDebug::GlitchLog glitches; |
| const char* funcName = fCoinDictEntry.fFunctionName; |
| if (!strcmp("calc_angles", funcName)) { |
| ; |
| } else if (!strcmp("missing_coincidence", funcName)) { |
| missing_coincidence(&glitches, fContourHead); |
| } else if (!strcmp("move_multiples", funcName)) { |
| move_multiples(&glitches, fContourHead); |
| } else if (!strcmp("move_nearby", funcName)) { |
| move_nearby(&glitches, fContourHead); |
| } else if (!strcmp("addExpanded", funcName)) { |
| fCoincidence->debugAddExpanded(&glitches); |
| } else if (!strcmp("addMissing", funcName)) { |
| bool added; |
| fCoincidence->debugAddMissing(&glitches, &added); |
| } else if (!strcmp("addEndMovedSpans", funcName)) { |
| fCoincidence->debugAddEndMovedSpans(&glitches); |
| } else if (!strcmp("correctEnds", funcName)) { |
| fCoincidence->debugCorrectEnds(&glitches); |
| } else if (!strcmp("expand", funcName)) { |
| fCoincidence->debugExpand(&glitches); |
| } else if (!strcmp("findOverlaps", funcName)) { |
| ; |
| } else if (!strcmp("mark", funcName)) { |
| fCoincidence->debugMark(&glitches); |
| } else if (!strcmp("apply", funcName)) { |
| ; |
| } else { |
| SkASSERT(0); // add missing case |
| } |
| if (glitches.fGlitches.count()) { |
| fCoinDictEntry.fGlitchType = glitches.fGlitches[0].fType; |
| } |
| fCoinChangedDict.add(fCoinDictEntry); |
| } |
| #endif |
| |
| void SkPathOpsDebug::ShowActiveSpans(SkOpContourHead* contourList) { |
| #if DEBUG_ACTIVE_SPANS |
| SkString str; |
| SkOpContour* contour = contourList; |
| do { |
| contour->debugShowActiveSpans(&str); |
| } while ((contour = contour->next())); |
| if (!gActiveSpans.equals(str)) { |
| const char* s = str.c_str(); |
| const char* end; |
| while ((end = strchr(s, '\n'))) { |
| SkDebugf("%.*s", end - s + 1, s); |
| s = end + 1; |
| } |
| gActiveSpans.set(str); |
| } |
| #endif |
| } |
| |
| #if DEBUG_COINCIDENCE || DEBUG_COIN |
| void SkPathOpsDebug::CheckHealth(SkOpContourHead* contourList) { |
| #if DEBUG_COINCIDENCE |
| contourList->globalState()->debugSetCheckHealth(true); |
| #endif |
| #if DEBUG_COIN |
| GlitchLog glitches; |
| const SkOpContour* contour = contourList; |
| const SkOpCoincidence* coincidence = contour->globalState()->coincidence(); |
| coincidence->debugCheckValid(&glitches); // don't call validate; spans may be inconsistent |
| do { |
| contour->debugCheckHealth(&glitches); |
| contour->debugMissingCoincidence(&glitches); |
| } while ((contour = contour->next())); |
| bool added; |
| coincidence->debugAddMissing(&glitches, &added); |
| coincidence->debugExpand(&glitches); |
| coincidence->debugAddExpanded(&glitches); |
| coincidence->debugMark(&glitches); |
| unsigned mask = 0; |
| for (int index = 0; index < glitches.fGlitches.count(); ++index) { |
| const SpanGlitch& glitch = glitches.fGlitches[index]; |
| mask |= 1 << glitch.fType; |
| } |
| for (int index = 0; index < kGlitchType_Count; ++index) { |
| SkDebugf(mask & (1 << index) ? "x" : "-"); |
| } |
| SkDebugf(" %s\n", contourList->globalState()->debugCoinDictEntry().fFunctionName); |
| for (int index = 0; index < glitches.fGlitches.count(); ++index) { |
| const SpanGlitch& glitch = glitches.fGlitches[index]; |
| SkDebugf("%02d: ", index); |
| if (glitch.fBase) { |
| SkDebugf(" seg/base=%d/%d", glitch.fBase->segment()->debugID(), |
| glitch.fBase->debugID()); |
| } |
| if (glitch.fSuspect) { |
| SkDebugf(" seg/base=%d/%d", glitch.fSuspect->segment()->debugID(), |
| glitch.fSuspect->debugID()); |
| } |
| if (glitch.fSegment) { |
| SkDebugf(" segment=%d", glitch.fSegment->debugID()); |
| } |
| if (glitch.fCoinSpan) { |
| SkDebugf(" coinSeg/Span/PtT=%d/%d/%d", glitch.fCoinSpan->segment()->debugID(), |
| glitch.fCoinSpan->span()->debugID(), glitch.fCoinSpan->debugID()); |
| } |
| if (glitch.fEndSpan) { |
| SkDebugf(" endSpan=%d", glitch.fEndSpan->debugID()); |
| } |
| if (glitch.fOppSpan) { |
| SkDebugf(" oppSeg/Span/PtT=%d/%d/%d", glitch.fOppSpan->segment()->debugID(), |
| glitch.fOppSpan->span()->debugID(), glitch.fOppSpan->debugID()); |
| } |
| if (glitch.fOppEndSpan) { |
| SkDebugf(" oppEndSpan=%d", glitch.fOppEndSpan->debugID()); |
| } |
| if (!SkScalarIsNaN(glitch.fStartT)) { |
| SkDebugf(" startT=%g", glitch.fStartT); |
| } |
| if (!SkScalarIsNaN(glitch.fEndT)) { |
| SkDebugf(" endT=%g", glitch.fEndT); |
| } |
| if (glitch.fOppSegment) { |
| SkDebugf(" segment=%d", glitch.fOppSegment->debugID()); |
| } |
| if (!SkScalarIsNaN(glitch.fOppStartT)) { |
| SkDebugf(" oppStartT=%g", glitch.fOppStartT); |
| } |
| if (!SkScalarIsNaN(glitch.fOppEndT)) { |
| SkDebugf(" oppEndT=%g", glitch.fOppEndT); |
| } |
| if (!SkScalarIsNaN(glitch.fPt.fX) || !SkScalarIsNaN(glitch.fPt.fY)) { |
| SkDebugf(" pt=%g,%g", glitch.fPt.fX, glitch.fPt.fY); |
| } |
| DumpGlitchType(glitch.fType); |
| SkDebugf("\n"); |
| } |
| #if DEBUG_COINCIDENCE |
| contourList->globalState()->debugSetCheckHealth(false); |
| #endif |
| #if 01 && DEBUG_ACTIVE_SPANS |
| // SkDebugf("active after %s:\n", id); |
| ShowActiveSpans(contourList); |
| #endif |
| #endif |
| } |
| #endif |
| |
| #if DEBUG_COIN |
| void SkPathOpsDebug::DumpGlitchType(GlitchType glitchType) { |
| switch (glitchType) { |
| case kAddCorruptCoin_Glitch: SkDebugf(" AddCorruptCoin"); break; |
| case kAddExpandedCoin_Glitch: SkDebugf(" AddExpandedCoin"); break; |
| case kAddExpandedFail_Glitch: SkDebugf(" AddExpandedFail"); break; |
| case kAddIfCollapsed_Glitch: SkDebugf(" AddIfCollapsed"); break; |
| case kAddIfMissingCoin_Glitch: SkDebugf(" AddIfMissingCoin"); break; |
| case kAddMissingCoin_Glitch: SkDebugf(" AddMissingCoin"); break; |
| case kAddMissingExtend_Glitch: SkDebugf(" AddMissingExtend"); break; |
| case kAddOrOverlap_Glitch: SkDebugf(" AAddOrOverlap"); break; |
| case kCollapsedCoin_Glitch: SkDebugf(" CollapsedCoin"); break; |
| case kCollapsedDone_Glitch: SkDebugf(" CollapsedDone"); break; |
| case kCollapsedOppValue_Glitch: SkDebugf(" CollapsedOppValue"); break; |
| case kCollapsedSpan_Glitch: SkDebugf(" CollapsedSpan"); break; |
| case kCollapsedWindValue_Glitch: SkDebugf(" CollapsedWindValue"); break; |
| case kCorrectEnd_Glitch: SkDebugf(" CorrectEnd"); break; |
| case kDeletedCoin_Glitch: SkDebugf(" DeletedCoin"); break; |
| case kExpandCoin_Glitch: SkDebugf(" ExpandCoin"); break; |
| case kFail_Glitch: SkDebugf(" Fail"); break; |
| case kMarkCoinEnd_Glitch: SkDebugf(" MarkCoinEnd"); break; |
| case kMarkCoinInsert_Glitch: SkDebugf(" MarkCoinInsert"); break; |
| case kMarkCoinMissing_Glitch: SkDebugf(" MarkCoinMissing"); break; |
| case kMarkCoinStart_Glitch: SkDebugf(" MarkCoinStart"); break; |
| case kMergeMatches_Glitch: SkDebugf(" MergeMatches"); break; |
| case kMissingCoin_Glitch: SkDebugf(" MissingCoin"); break; |
| case kMissingDone_Glitch: SkDebugf(" MissingDone"); break; |
| case kMissingIntersection_Glitch: SkDebugf(" MissingIntersection"); break; |
| case kMoveMultiple_Glitch: SkDebugf(" MoveMultiple"); break; |
| case kMoveNearbyClearAll_Glitch: SkDebugf(" MoveNearbyClearAll"); break; |
| case kMoveNearbyClearAll2_Glitch: SkDebugf(" MoveNearbyClearAll2"); break; |
| case kMoveNearbyMerge_Glitch: SkDebugf(" MoveNearbyMerge"); break; |
| case kMoveNearbyMergeFinal_Glitch: SkDebugf(" MoveNearbyMergeFinal"); break; |
| case kMoveNearbyRelease_Glitch: SkDebugf(" MoveNearbyRelease"); break; |
| case kMoveNearbyReleaseFinal_Glitch: SkDebugf(" MoveNearbyReleaseFinal"); break; |
| case kReleasedSpan_Glitch: SkDebugf(" ReleasedSpan"); break; |
| case kReturnFalse_Glitch: SkDebugf(" ReturnFalse"); break; |
| case kUnaligned_Glitch: SkDebugf(" Unaligned"); break; |
| case kUnalignedHead_Glitch: SkDebugf(" UnalignedHead"); break; |
| case kUnalignedTail_Glitch: SkDebugf(" UnalignedTail"); break; |
| case kUninitialized_Glitch: break; |
| default: SkASSERT(0); |
| } |
| } |
| #endif |
| |
| #if defined SK_DEBUG || !FORCE_RELEASE |
| void SkPathOpsDebug::MathematicaIze(char* str, size_t bufferLen) { |
| size_t len = strlen(str); |
| bool num = false; |
| for (size_t idx = 0; idx < len; ++idx) { |
| if (num && str[idx] == 'e') { |
| if (len + 2 >= bufferLen) { |
| return; |
| } |
| memmove(&str[idx + 2], &str[idx + 1], len - idx); |
| str[idx] = '*'; |
| str[idx + 1] = '^'; |
| ++len; |
| } |
| num = str[idx] >= '0' && str[idx] <= '9'; |
| } |
| } |
| |
| bool SkPathOpsDebug::ValidWind(int wind) { |
| return wind > SK_MinS32 + 0xFFFF && wind < SK_MaxS32 - 0xFFFF; |
| } |
| |
| void SkPathOpsDebug::WindingPrintf(int wind) { |
| if (wind == SK_MinS32) { |
| SkDebugf("?"); |
| } else { |
| SkDebugf("%d", wind); |
| } |
| } |
| #endif // defined SK_DEBUG || !FORCE_RELEASE |
| |
| |
| #if DEBUG_SHOW_TEST_NAME |
| void* SkPathOpsDebug::CreateNameStr() { return new char[DEBUG_FILENAME_STRING_LENGTH]; } |
| |
| void SkPathOpsDebug::DeleteNameStr(void* v) { delete[] reinterpret_cast<char*>(v); } |
| |
| void SkPathOpsDebug::BumpTestName(char* test) { |
| char* num = test + strlen(test); |
| while (num[-1] >= '0' && num[-1] <= '9') { |
| --num; |
| } |
| if (num[0] == '\0') { |
| return; |
| } |
| int dec = atoi(num); |
| if (dec == 0) { |
| return; |
| } |
| ++dec; |
| SK_SNPRINTF(num, DEBUG_FILENAME_STRING_LENGTH - (num - test), "%d", dec); |
| } |
| #endif |
| |
| static void show_function_header(const char* functionName) { |
| SkDebugf("\nstatic void %s(skiatest::Reporter* reporter, const char* filename) {\n", functionName); |
| if (strcmp("skphealth_com76", functionName) == 0) { |
| SkDebugf("found it\n"); |
| } |
| } |
| |
| static const char* gOpStrs[] = { |
| "kDifference_SkPathOp", |
| "kIntersect_SkPathOp", |
| "kUnion_SkPathOp", |
| "kXOR_PathOp", |
| "kReverseDifference_SkPathOp", |
| }; |
| |
| const char* SkPathOpsDebug::OpStr(SkPathOp op) { |
| return gOpStrs[op]; |
| } |
| |
| static void show_op(SkPathOp op, const char* pathOne, const char* pathTwo) { |
| SkDebugf(" testPathOp(reporter, %s, %s, %s, filename);\n", pathOne, pathTwo, gOpStrs[op]); |
| SkDebugf("}\n"); |
| } |
| |
| SK_DECLARE_STATIC_MUTEX(gTestMutex); |
| |
| void SkPathOpsDebug::ShowPath(const SkPath& a, const SkPath& b, SkPathOp shapeOp, |
| const char* testName) { |
| SkAutoMutexAcquire ac(gTestMutex); |
| show_function_header(testName); |
| ShowOnePath(a, "path", true); |
| ShowOnePath(b, "pathB", true); |
| show_op(shapeOp, "path", "pathB"); |
| } |
| |
| #include "SkPathOpsTypes.h" |
| #include "SkIntersectionHelper.h" |
| #include "SkIntersections.h" |
| |
| #if DEBUG_COIN |
| |
| SK_DECLARE_STATIC_MUTEX(gCoinDictMutex); |
| |
| void SkOpGlobalState::debugAddToGlobalCoinDicts() { |
| SkAutoMutexAcquire ac(&gCoinDictMutex); |
| SkPathOpsDebug::gCoinSumChangedDict.add(fCoinChangedDict); |
| SkPathOpsDebug::gCoinSumVisitedDict.add(fCoinVisitedDict); |
| } |
| |
| #endif |
| |
| #if DEBUG_T_SECT_LOOP_COUNT |
| void SkOpGlobalState::debugAddLoopCount(SkIntersections* i, const SkIntersectionHelper& wt, |
| const SkIntersectionHelper& wn) { |
| for (int index = 0; index < (int) SK_ARRAY_COUNT(fDebugLoopCount); ++index) { |
| SkIntersections::DebugLoop looper = (SkIntersections::DebugLoop) index; |
| if (fDebugLoopCount[index] >= i->debugLoopCount(looper)) { |
| continue; |
| } |
| fDebugLoopCount[index] = i->debugLoopCount(looper); |
| fDebugWorstVerb[index * 2] = wt.segment()->verb(); |
| fDebugWorstVerb[index * 2 + 1] = wn.segment()->verb(); |
| sk_bzero(&fDebugWorstPts[index * 8], sizeof(SkPoint) * 8); |
| memcpy(&fDebugWorstPts[index * 2 * 4], wt.pts(), |
| (SkPathOpsVerbToPoints(wt.segment()->verb()) + 1) * sizeof(SkPoint)); |
| memcpy(&fDebugWorstPts[(index * 2 + 1) * 4], wn.pts(), |
| (SkPathOpsVerbToPoints(wn.segment()->verb()) + 1) * sizeof(SkPoint)); |
| fDebugWorstWeight[index * 2] = wt.weight(); |
| fDebugWorstWeight[index * 2 + 1] = wn.weight(); |
| } |
| i->debugResetLoopCount(); |
| } |
| |
| void SkOpGlobalState::debugDoYourWorst(SkOpGlobalState* local) { |
| for (int index = 0; index < (int) SK_ARRAY_COUNT(fDebugLoopCount); ++index) { |
| if (fDebugLoopCount[index] >= local->fDebugLoopCount[index]) { |
| continue; |
| } |
| fDebugLoopCount[index] = local->fDebugLoopCount[index]; |
| fDebugWorstVerb[index * 2] = local->fDebugWorstVerb[index * 2]; |
| fDebugWorstVerb[index * 2 + 1] = local->fDebugWorstVerb[index * 2 + 1]; |
| memcpy(&fDebugWorstPts[index * 2 * 4], &local->fDebugWorstPts[index * 2 * 4], |
| sizeof(SkPoint) * 8); |
| fDebugWorstWeight[index * 2] = local->fDebugWorstWeight[index * 2]; |
| fDebugWorstWeight[index * 2 + 1] = local->fDebugWorstWeight[index * 2 + 1]; |
| } |
| local->debugResetLoopCounts(); |
| } |
| |
| static void dump_curve(SkPath::Verb verb, const SkPoint& pts, float weight) { |
| if (!verb) { |
| return; |
| } |
| const char* verbs[] = { "", "line", "quad", "conic", "cubic" }; |
| SkDebugf("%s: {{", verbs[verb]); |
| int ptCount = SkPathOpsVerbToPoints(verb); |
| for (int index = 0; index <= ptCount; ++index) { |
| SkDPoint::Dump((&pts)[index]); |
| if (index < ptCount - 1) { |
| SkDebugf(", "); |
| } |
| } |
| SkDebugf("}"); |
| if (weight != 1) { |
| SkDebugf(", "); |
| if (weight == floorf(weight)) { |
| SkDebugf("%.0f", weight); |
| } else { |
| SkDebugf("%1.9gf", weight); |
| } |
| } |
| SkDebugf("}\n"); |
| } |
| |
| void SkOpGlobalState::debugLoopReport() { |
| const char* loops[] = { "iterations", "coinChecks", "perpCalcs" }; |
| SkDebugf("\n"); |
| for (int index = 0; index < (int) SK_ARRAY_COUNT(fDebugLoopCount); ++index) { |
| SkDebugf("%s: %d\n", loops[index], fDebugLoopCount[index]); |
| dump_curve(fDebugWorstVerb[index * 2], fDebugWorstPts[index * 2 * 4], |
| fDebugWorstWeight[index * 2]); |
| dump_curve(fDebugWorstVerb[index * 2 + 1], fDebugWorstPts[(index * 2 + 1) * 4], |
| fDebugWorstWeight[index * 2 + 1]); |
| } |
| } |
| |
| void SkOpGlobalState::debugResetLoopCounts() { |
| sk_bzero(fDebugLoopCount, sizeof(fDebugLoopCount)); |
| sk_bzero(fDebugWorstVerb, sizeof(fDebugWorstVerb)); |
| sk_bzero(fDebugWorstPts, sizeof(fDebugWorstPts)); |
| sk_bzero(fDebugWorstWeight, sizeof(fDebugWorstWeight)); |
| } |
| #endif |
| |
| bool SkOpGlobalState::DebugRunFail() { |
| return SkPathOpsDebug::gRunFail; |
| } |
| |
| // this is const so it can be called by const methods that overwise don't alter state |
| #if DEBUG_VALIDATE || DEBUG_COIN |
| void SkOpGlobalState::debugSetPhase(const char* funcName DEBUG_COIN_DECLARE_PARAMS()) const { |
| auto writable = const_cast<SkOpGlobalState*>(this); |
| #if DEBUG_VALIDATE |
| writable->setPhase(phase); |
| #endif |
| #if DEBUG_COIN |
| SkPathOpsDebug::CoinDictEntry* entry = &writable->fCoinDictEntry; |
| writable->fPreviousFuncName = entry->fFunctionName; |
| entry->fIteration = iteration; |
| entry->fLineNumber = lineNo; |
| entry->fGlitchType = SkPathOpsDebug::kUninitialized_Glitch; |
| entry->fFunctionName = funcName; |
| writable->fCoinVisitedDict.add(*entry); |
| writable->debugAddToCoinChangedDict(); |
| #endif |
| } |
| #endif |
| |
| #if DEBUG_T_SECT_LOOP_COUNT |
| void SkIntersections::debugBumpLoopCount(DebugLoop index) { |
| fDebugLoopCount[index]++; |
| } |
| |
| int SkIntersections::debugLoopCount(DebugLoop index) const { |
| return fDebugLoopCount[index]; |
| } |
| |
| void SkIntersections::debugResetLoopCount() { |
| sk_bzero(fDebugLoopCount, sizeof(fDebugLoopCount)); |
| } |
| #endif |
| |
| #include "SkPathOpsConic.h" |
| #include "SkPathOpsCubic.h" |
| |
| SkDCubic SkDQuad::debugToCubic() const { |
| SkDCubic cubic; |
| cubic[0] = fPts[0]; |
| cubic[2] = fPts[1]; |
| cubic[3] = fPts[2]; |
| cubic[1].fX = (cubic[0].fX + cubic[2].fX * 2) / 3; |
| cubic[1].fY = (cubic[0].fY + cubic[2].fY * 2) / 3; |
| cubic[2].fX = (cubic[3].fX + cubic[2].fX * 2) / 3; |
| cubic[2].fY = (cubic[3].fY + cubic[2].fY * 2) / 3; |
| return cubic; |
| } |
| |
| void SkDQuad::debugSet(const SkDPoint* pts) { |
| memcpy(fPts, pts, sizeof(fPts)); |
| SkDEBUGCODE(fDebugGlobalState = nullptr); |
| } |
| |
| void SkDCubic::debugSet(const SkDPoint* pts) { |
| memcpy(fPts, pts, sizeof(fPts)); |
| SkDEBUGCODE(fDebugGlobalState = nullptr); |
| } |
| |
| void SkDConic::debugSet(const SkDPoint* pts, SkScalar weight) { |
| fPts.debugSet(pts); |
| fWeight = weight; |
| } |
| |
| void SkDRect::debugInit() { |
| fLeft = fTop = fRight = fBottom = SK_ScalarNaN; |
| } |
| |
| #include "SkOpAngle.h" |
| #include "SkOpSegment.h" |
| |
| #if DEBUG_COIN |
| // commented-out lines keep this in sync with addT() |
| const SkOpPtT* SkOpSegment::debugAddT(double t, SkPathOpsDebug::GlitchLog* log) const { |
| debugValidate(); |
| SkPoint pt = this->ptAtT(t); |
| const SkOpSpanBase* span = &fHead; |
| do { |
| const SkOpPtT* result = span->ptT(); |
| if (t == result->fT || this->match(result, this, t, pt)) { |
| // span->bumpSpanAdds(); |
| return result; |
| } |
| if (t < result->fT) { |
| const SkOpSpan* prev = result->span()->prev(); |
| FAIL_WITH_NULL_IF(!prev, span); |
| // marks in global state that new op span has been allocated |
| this->globalState()->setAllocatedOpSpan(); |
| // span->init(this, prev, t, pt); |
| this->debugValidate(); |
| // #if DEBUG_ADD_T |
| // SkDebugf("%s insert t=%1.9g segID=%d spanID=%d\n", __FUNCTION__, t, |
| // span->segment()->debugID(), span->debugID()); |
| // #endif |
| // span->bumpSpanAdds(); |
| return nullptr; |
| } |
| FAIL_WITH_NULL_IF(span != &fTail, span); |
| } while ((span = span->upCast()->next())); |
| SkASSERT(0); |
| return nullptr; // we never get here, but need this to satisfy compiler |
| } |
| #endif |
| |
| #if DEBUG_ANGLE |
| void SkOpSegment::debugCheckAngleCoin() const { |
| const SkOpSpanBase* base = &fHead; |
| const SkOpSpan* span; |
| do { |
| const SkOpAngle* angle = base->fromAngle(); |
| if (angle && angle->debugCheckCoincidence()) { |
| angle->debugCheckNearCoincidence(); |
| } |
| if (base->final()) { |
| break; |
| } |
| span = base->upCast(); |
| angle = span->toAngle(); |
| if (angle && angle->debugCheckCoincidence()) { |
| angle->debugCheckNearCoincidence(); |
| } |
| } while ((base = span->next())); |
| } |
| #endif |
| |
| #if DEBUG_COIN |
| // this mimics the order of the checks in handle coincidence |
| void SkOpSegment::debugCheckHealth(SkPathOpsDebug::GlitchLog* glitches) const { |
| debugMoveMultiples(glitches); |
| debugMoveNearby(glitches); |
| debugMissingCoincidence(glitches); |
| } |
| |
| // commented-out lines keep this in sync with clearAll() |
| void SkOpSegment::debugClearAll(SkPathOpsDebug::GlitchLog* glitches) const { |
| const SkOpSpan* span = &fHead; |
| do { |
| this->debugClearOne(span, glitches); |
| } while ((span = span->next()->upCastable())); |
| this->globalState()->coincidence()->debugRelease(glitches, this); |
| } |
| |
| // commented-out lines keep this in sync with clearOne() |
| void SkOpSegment::debugClearOne(const SkOpSpan* span, SkPathOpsDebug::GlitchLog* glitches) const { |
| if (span->windValue()) glitches->record(SkPathOpsDebug::kCollapsedWindValue_Glitch, span); |
| if (span->oppValue()) glitches->record(SkPathOpsDebug::kCollapsedOppValue_Glitch, span); |
| if (!span->done()) glitches->record(SkPathOpsDebug::kCollapsedDone_Glitch, span); |
| } |
| #endif |
| |
| SkOpAngle* SkOpSegment::debugLastAngle() { |
| SkOpAngle* result = nullptr; |
| SkOpSpan* span = this->head(); |
| do { |
| if (span->toAngle()) { |
| SkASSERT(!result); |
| result = span->toAngle(); |
| } |
| } while ((span = span->next()->upCastable())); |
| SkASSERT(result); |
| return result; |
| } |
| |
| #if DEBUG_COIN |
| // commented-out lines keep this in sync with ClearVisited |
| void SkOpSegment::DebugClearVisited(const SkOpSpanBase* span) { |
| // reset visited flag back to false |
| do { |
| const SkOpPtT* ptT = span->ptT(), * stopPtT = ptT; |
| while ((ptT = ptT->next()) != stopPtT) { |
| const SkOpSegment* opp = ptT->segment(); |
| opp->resetDebugVisited(); |
| } |
| } while (!span->final() && (span = span->upCast()->next())); |
| } |
| #endif |
| |
| #if DEBUG_COIN |
| // commented-out lines keep this in sync with missingCoincidence() |
| // look for pairs of undetected coincident curves |
| // assumes that segments going in have visited flag clear |
| // Even though pairs of curves correct detect coincident runs, a run may be missed |
| // if the coincidence is a product of multiple intersections. For instance, given |
| // curves A, B, and C: |
| // A-B intersect at a point 1; A-C and B-C intersect at point 2, so near |
| // the end of C that the intersection is replaced with the end of C. |
| // Even though A-B correctly do not detect an intersection at point 2, |
| // the resulting run from point 1 to point 2 is coincident on A and B. |
| void SkOpSegment::debugMissingCoincidence(SkPathOpsDebug::GlitchLog* log) const { |
| if (this->done()) { |
| return; |
| } |
| const SkOpSpan* prior = nullptr; |
| const SkOpSpanBase* spanBase = &fHead; |
| // bool result = false; |
| do { |
| const SkOpPtT* ptT = spanBase->ptT(), * spanStopPtT = ptT; |
| SkASSERT(ptT->span() == spanBase); |
| while ((ptT = ptT->next()) != spanStopPtT) { |
| if (ptT->deleted()) { |
| continue; |
| } |
| const SkOpSegment* opp = ptT->span()->segment(); |
| if (opp->done()) { |
| continue; |
| } |
| // when opp is encounted the 1st time, continue; on 2nd encounter, look for coincidence |
| if (!opp->debugVisited()) { |
| continue; |
| } |
| if (spanBase == &fHead) { |
| continue; |
| } |
| if (ptT->segment() == this) { |
| continue; |
| } |
| const SkOpSpan* span = spanBase->upCastable(); |
| // FIXME?: this assumes that if the opposite segment is coincident then no more |
| // coincidence needs to be detected. This may not be true. |
| if (span && span->segment() != opp && span->containsCoincidence(opp)) { // debug has additional condition since it may be called before inner duplicate points have been deleted |
| continue; |
| } |
| if (spanBase->segment() != opp && spanBase->containsCoinEnd(opp)) { // debug has additional condition since it may be called before inner duplicate points have been deleted |
| continue; |
| } |
| const SkOpPtT* priorPtT = nullptr, * priorStopPtT; |
| // find prior span containing opp segment |
| const SkOpSegment* priorOpp = nullptr; |
| const SkOpSpan* priorTest = spanBase->prev(); |
| while (!priorOpp && priorTest) { |
| priorStopPtT = priorPtT = priorTest->ptT(); |
| while ((priorPtT = priorPtT->next()) != priorStopPtT) { |
| if (priorPtT->deleted()) { |
| continue; |
| } |
| const SkOpSegment* segment = priorPtT->span()->segment(); |
| if (segment == opp) { |
| prior = priorTest; |
| priorOpp = opp; |
| break; |
| } |
| } |
| priorTest = priorTest->prev(); |
| } |
| if (!priorOpp) { |
| continue; |
| } |
| if (priorPtT == ptT) { |
| continue; |
| } |
| const SkOpPtT* oppStart = prior->ptT(); |
| const SkOpPtT* oppEnd = spanBase->ptT(); |
| bool swapped = priorPtT->fT > ptT->fT; |
| if (swapped) { |
| using std::swap; |
| swap(priorPtT, ptT); |
| swap(oppStart, oppEnd); |
| } |
| const SkOpCoincidence* coincidence = this->globalState()->coincidence(); |
| const SkOpPtT* rootPriorPtT = priorPtT->span()->ptT(); |
| const SkOpPtT* rootPtT = ptT->span()->ptT(); |
| const SkOpPtT* rootOppStart = oppStart->span()->ptT(); |
| const SkOpPtT* rootOppEnd = oppEnd->span()->ptT(); |
| if (coincidence->contains(rootPriorPtT, rootPtT, rootOppStart, rootOppEnd)) { |
| goto swapBack; |
| } |
| if (testForCoincidence(rootPriorPtT, rootPtT, prior, spanBase, opp)) { |
| // mark coincidence |
| #if DEBUG_COINCIDENCE_VERBOSE |
| // SkDebugf("%s coinSpan=%d endSpan=%d oppSpan=%d oppEndSpan=%d\n", __FUNCTION__, |
| // rootPriorPtT->debugID(), rootPtT->debugID(), rootOppStart->debugID(), |
| // rootOppEnd->debugID()); |
| #endif |
| log->record(SkPathOpsDebug::kMissingCoin_Glitch, priorPtT, ptT, oppStart, oppEnd); |
| // coincidences->add(rootPriorPtT, rootPtT, rootOppStart, rootOppEnd); |
| // } |
| #if DEBUG_COINCIDENCE |
| // SkASSERT(coincidences->contains(rootPriorPtT, rootPtT, rootOppStart, rootOppEnd); |
| #endif |
| // result = true; |
| } |
| swapBack: |
| if (swapped) { |
| using std::swap; |
| swap(priorPtT, ptT); |
| } |
| } |
| } while ((spanBase = spanBase->final() ? nullptr : spanBase->upCast()->next())); |
| DebugClearVisited(&fHead); |
| return; |
| } |
| |
| // commented-out lines keep this in sync with moveMultiples() |
| // if a span has more than one intersection, merge the other segments' span as needed |
| void SkOpSegment::debugMoveMultiples(SkPathOpsDebug::GlitchLog* glitches) const { |
| debugValidate(); |
| const SkOpSpanBase* test = &fHead; |
| do { |
| int addCount = test->spanAddsCount(); |
| // SkASSERT(addCount >= 1); |
| if (addCount <= 1) { |
| continue; |
| } |
| const SkOpPtT* startPtT = test->ptT(); |
| const SkOpPtT* testPtT = startPtT; |
| do { // iterate through all spans associated with start |
| const SkOpSpanBase* oppSpan = testPtT->span(); |
| if (oppSpan->spanAddsCount() == addCount) { |
| continue; |
| } |
| if (oppSpan->deleted()) { |
| continue; |
| } |
| const SkOpSegment* oppSegment = oppSpan->segment(); |
| if (oppSegment == this) { |
| continue; |
| } |
| // find range of spans to consider merging |
| const SkOpSpanBase* oppPrev = oppSpan; |
| const SkOpSpanBase* oppFirst = oppSpan; |
| while ((oppPrev = oppPrev->prev())) { |
| if (!roughly_equal(oppPrev->t(), oppSpan->t())) { |
| break; |
| } |
| if (oppPrev->spanAddsCount() == addCount) { |
| continue; |
| } |
| if (oppPrev->deleted()) { |
| continue; |
| } |
| oppFirst = oppPrev; |
| } |
| const SkOpSpanBase* oppNext = oppSpan; |
| const SkOpSpanBase* oppLast = oppSpan; |
| while ((oppNext = oppNext->final() ? nullptr : oppNext->upCast()->next())) { |
| if (!roughly_equal(oppNext->t(), oppSpan->t())) { |
| break; |
| } |
| if (oppNext->spanAddsCount() == addCount) { |
| continue; |
| } |
| if (oppNext->deleted()) { |
| continue; |
| } |
| oppLast = oppNext; |
| } |
| if (oppFirst == oppLast) { |
| continue; |
| } |
| const SkOpSpanBase* oppTest = oppFirst; |
| do { |
| if (oppTest == oppSpan) { |
| continue; |
| } |
| // check to see if the candidate meets specific criteria: |
| // it contains spans of segments in test's loop but not including 'this' |
| const SkOpPtT* oppStartPtT = oppTest->ptT(); |
| const SkOpPtT* oppPtT = oppStartPtT; |
| while ((oppPtT = oppPtT->next()) != oppStartPtT) { |
| const SkOpSegment* oppPtTSegment = oppPtT->segment(); |
| if (oppPtTSegment == this) { |
| goto tryNextSpan; |
| } |
| const SkOpPtT* matchPtT = startPtT; |
| do { |
| if (matchPtT->segment() == oppPtTSegment) { |
| goto foundMatch; |
| } |
| } while ((matchPtT = matchPtT->next()) != startPtT); |
| goto tryNextSpan; |
| foundMatch: // merge oppTest and oppSpan |
| oppSegment->debugValidate(); |
| oppTest->debugMergeMatches(glitches, oppSpan); |
| oppTest->debugAddOpp(glitches, oppSpan); |
| oppSegment->debugValidate(); |
| goto checkNextSpan; |
| } |
| tryNextSpan: |
| ; |
| } while (oppTest != oppLast && (oppTest = oppTest->upCast()->next())); |
| } while ((testPtT = testPtT->next()) != startPtT); |
| checkNextSpan: |
| ; |
| } while ((test = test->final() ? nullptr : test->upCast()->next())); |
| debugValidate(); |
| return; |
| } |
| |
| // commented-out lines keep this in sync with moveNearby() |
| // Move nearby t values and pts so they all hang off the same span. Alignment happens later. |
| void SkOpSegment::debugMoveNearby(SkPathOpsDebug::GlitchLog* glitches) const { |
| debugValidate(); |
| // release undeleted spans pointing to this seg that are linked to the primary span |
| const SkOpSpanBase* spanBase = &fHead; |
| do { |
| const SkOpPtT* ptT = spanBase->ptT(); |
| const SkOpPtT* headPtT = ptT; |
| while ((ptT = ptT->next()) != headPtT) { |
| const SkOpSpanBase* test = ptT->span(); |
| if (ptT->segment() == this && !ptT->deleted() && test != spanBase |
| && test->ptT() == ptT) { |
| if (test->final()) { |
| if (spanBase == &fHead) { |
| glitches->record(SkPathOpsDebug::kMoveNearbyClearAll_Glitch, this); |
| // return; |
| } |
| glitches->record(SkPathOpsDebug::kMoveNearbyReleaseFinal_Glitch, spanBase, ptT); |
| } else if (test->prev()) { |
| glitches->record(SkPathOpsDebug::kMoveNearbyRelease_Glitch, test, headPtT); |
| } |
| // break; |
| } |
| } |
| spanBase = spanBase->upCast()->next(); |
| } while (!spanBase->final()); |
| |
| // This loop looks for adjacent spans which are near by |
| spanBase = &fHead; |
| do { // iterate through all spans associated with start |
| const SkOpSpanBase* test = spanBase->upCast()->next(); |
| bool found; |
| if (!this->spansNearby(spanBase, test, &found)) { |
| glitches->record(SkPathOpsDebug::kMoveNearbyMergeFinal_Glitch, test); |
| } |
| if (found) { |
| if (test->final()) { |
| if (spanBase->prev()) { |
| glitches->record(SkPathOpsDebug::kMoveNearbyMergeFinal_Glitch, test); |
| } else { |
| glitches->record(SkPathOpsDebug::kMoveNearbyClearAll2_Glitch, this); |
| // return |
| } |
| } else { |
| glitches->record(SkPathOpsDebug::kMoveNearbyMerge_Glitch, spanBase); |
| } |
| } |
| spanBase = test; |
| } while (!spanBase->final()); |
| debugValidate(); |
| } |
| #endif |
| |
| void SkOpSegment::debugReset() { |
| this->init(this->fPts, this->fWeight, this->contour(), this->verb()); |
| } |
| |
| #if DEBUG_COINCIDENCE_ORDER |
| void SkOpSegment::debugSetCoinT(int index, SkScalar t) const { |
| if (fDebugBaseMax < 0 || fDebugBaseIndex == index) { |
| fDebugBaseIndex = index; |
| fDebugBaseMin = SkTMin(t, fDebugBaseMin); |
| fDebugBaseMax = SkTMax(t, fDebugBaseMax); |
| return; |
| } |
| SkASSERT(fDebugBaseMin >= t || t >= fDebugBaseMax); |
| if (fDebugLastMax < 0 || fDebugLastIndex == index) { |
| fDebugLastIndex = index; |
| fDebugLastMin = SkTMin(t, fDebugLastMin); |
| fDebugLastMax = SkTMax(t, fDebugLastMax); |
| return; |
| } |
| SkASSERT(fDebugLastMin >= t || t >= fDebugLastMax); |
| SkASSERT((t - fDebugBaseMin > 0) == (fDebugLastMin - fDebugBaseMin > 0)); |
| } |
| #endif |
| |
| #if DEBUG_ACTIVE_SPANS |
| void SkOpSegment::debugShowActiveSpans(SkString* str) const { |
| debugValidate(); |
| if (done()) { |
| return; |
| } |
| int lastId = -1; |
| double lastT = -1; |
| const SkOpSpan* span = &fHead; |
| do { |
| if (span->done()) { |
| continue; |
| } |
| if (lastId == this->debugID() && lastT == span->t()) { |
| continue; |
| } |
| lastId = this->debugID(); |
| lastT = span->t(); |
| str->appendf("%s id=%d", __FUNCTION__, this->debugID()); |
| // since endpoints may have be adjusted, show actual computed curves |
| SkDCurve curvePart; |
| this->subDivide(span, span->next(), &curvePart); |
| const SkDPoint* pts = curvePart.fCubic.fPts; |
| str->appendf(" (%1.9g,%1.9g", pts[0].fX, pts[0].fY); |
| for (int vIndex = 1; vIndex <= SkPathOpsVerbToPoints(fVerb); ++vIndex) { |
| str->appendf(" %1.9g,%1.9g", pts[vIndex].fX, pts[vIndex].fY); |
| } |
| if (SkPath::kConic_Verb == fVerb) { |
| str->appendf(" %1.9gf", curvePart.fConic.fWeight); |
| } |
| str->appendf(") t=%1.9g tEnd=%1.9g", span->t(), span->next()->t()); |
| if (span->windSum() == SK_MinS32) { |
| str->appendf(" windSum=?"); |
| } else { |
| str->appendf(" windSum=%d", span->windSum()); |
| } |
| if (span->oppValue() && span->oppSum() == SK_MinS32) { |
| str->appendf(" oppSum=?"); |
| } else if (span->oppValue() || span->oppSum() != SK_MinS32) { |
| str->appendf(" oppSum=%d", span->oppSum()); |
| } |
| str->appendf(" windValue=%d", span->windValue()); |
| if (span->oppValue() || span->oppSum() != SK_MinS32) { |
| str->appendf(" oppValue=%d", span->oppValue()); |
| } |
| str->appendf("\n"); |
| } while ((span = span->next()->upCastable())); |
| } |
| #endif |
| |
| #if DEBUG_MARK_DONE |
| void SkOpSegment::debugShowNewWinding(const char* fun, const SkOpSpan* span, int winding) { |
| const SkPoint& pt = span->ptT()->fPt; |
| SkDebugf("%s id=%d", fun, this->debugID()); |
| SkDebugf(" (%1.9g,%1.9g", fPts[0].fX, fPts[0].fY); |
| for (int vIndex = 1; vIndex <= SkPathOpsVerbToPoints(fVerb); ++vIndex) { |
| SkDebugf(" %1.9g,%1.9g", fPts[vIndex].fX, fPts[vIndex].fY); |
| } |
| SkDebugf(") t=%1.9g [%d] (%1.9g,%1.9g) tEnd=%1.9g newWindSum=", |
| span->t(), span->debugID(), pt.fX, pt.fY, span->next()->t()); |
| if (winding == SK_MinS32) { |
| SkDebugf("?"); |
| } else { |
| SkDebugf("%d", winding); |
| } |
| SkDebugf(" windSum="); |
| if (span->windSum() == SK_MinS32) { |
| SkDebugf("?"); |
| } else { |
| SkDebugf("%d", span->windSum()); |
| } |
| SkDebugf(" windValue=%d\n", span->windValue()); |
| } |
| |
| void SkOpSegment::debugShowNewWinding(const char* fun, const SkOpSpan* span, int winding, |
| int oppWinding) { |
| const SkPoint& pt = span->ptT()->fPt; |
| SkDebugf("%s id=%d", fun, this->debugID()); |
| SkDebugf(" (%1.9g,%1.9g", fPts[0].fX, fPts[0].fY); |
| for (int vIndex = 1; vIndex <= SkPathOpsVerbToPoints(fVerb); ++vIndex) { |
| SkDebugf(" %1.9g,%1.9g", fPts[vIndex].fX, fPts[vIndex].fY); |
| } |
| SkDebugf(") t=%1.9g [%d] (%1.9g,%1.9g) tEnd=%1.9g newWindSum=", |
| span->t(), span->debugID(), pt.fX, pt.fY, span->next()->t(), winding, oppWinding); |
| if (winding == SK_MinS32) { |
| SkDebugf("?"); |
| } else { |
| SkDebugf("%d", winding); |
| } |
| SkDebugf(" newOppSum="); |
| if (oppWinding == SK_MinS32) { |
| SkDebugf("?"); |
| } else { |
| SkDebugf("%d", oppWinding); |
| } |
| SkDebugf(" oppSum="); |
| if (span->oppSum() == SK_MinS32) { |
| SkDebugf("?"); |
| } else { |
| SkDebugf("%d", span->oppSum()); |
| } |
| SkDebugf(" windSum="); |
| if (span->windSum() == SK_MinS32) { |
| SkDebugf("?"); |
| } else { |
| SkDebugf("%d", span->windSum()); |
| } |
| SkDebugf(" windValue=%d oppValue=%d\n", span->windValue(), span->oppValue()); |
| } |
| |
| #endif |
| |
| // loop looking for a pair of angle parts that are too close to be sorted |
| /* This is called after other more simple intersection and angle sorting tests have been exhausted. |
| This should be rarely called -- the test below is thorough and time consuming. |
| This checks the distance between start points; the distance between |
| */ |
| #if DEBUG_ANGLE |
| void SkOpAngle::debugCheckNearCoincidence() const { |
| const SkOpAngle* test = this; |
| do { |
| const SkOpSegment* testSegment = test->segment(); |
| double testStartT = test->start()->t(); |
| SkDPoint testStartPt = testSegment->dPtAtT(testStartT); |
| double testEndT = test->end()->t(); |
| SkDPoint testEndPt = testSegment->dPtAtT(testEndT); |
| double testLenSq = testStartPt.distanceSquared(testEndPt); |
| SkDebugf("%s testLenSq=%1.9g id=%d\n", __FUNCTION__, testLenSq, testSegment->debugID()); |
| double testMidT = (testStartT + testEndT) / 2; |
| const SkOpAngle* next = test; |
| while ((next = next->fNext) != this) { |
| SkOpSegment* nextSegment = next->segment(); |
| double testMidDistSq = testSegment->distSq(testMidT, next); |
| double testEndDistSq = testSegment->distSq(testEndT, next); |
| double nextStartT = next->start()->t(); |
| SkDPoint nextStartPt = nextSegment->dPtAtT(nextStartT); |
| double distSq = testStartPt.distanceSquared(nextStartPt); |
| double nextEndT = next->end()->t(); |
| double nextMidT = (nextStartT + nextEndT) / 2; |
| double nextMidDistSq = nextSegment->distSq(nextMidT, test); |
| double nextEndDistSq = nextSegment->distSq(nextEndT, test); |
| SkDebugf("%s distSq=%1.9g testId=%d nextId=%d\n", __FUNCTION__, distSq, |
| testSegment->debugID(), nextSegment->debugID()); |
| SkDebugf("%s testMidDistSq=%1.9g\n", __FUNCTION__, testMidDistSq); |
| SkDebugf("%s testEndDistSq=%1.9g\n", __FUNCTION__, testEndDistSq); |
| SkDebugf("%s nextMidDistSq=%1.9g\n", __FUNCTION__, nextMidDistSq); |
| SkDebugf("%s nextEndDistSq=%1.9g\n", __FUNCTION__, nextEndDistSq); |
| SkDPoint nextEndPt = nextSegment->dPtAtT(nextEndT); |
| double nextLenSq = nextStartPt.distanceSquared(nextEndPt); |
| SkDebugf("%s nextLenSq=%1.9g\n", __FUNCTION__, nextLenSq); |
| SkDebugf("\n"); |
| } |
| test = test->fNext; |
| } while (test->fNext != this); |
| } |
| #endif |
| |
| #if DEBUG_ANGLE |
| SkString SkOpAngle::debugPart() const { |
| SkString result; |
| switch (this->segment()->verb()) { |
| case SkPath::kLine_Verb: |
| result.printf(LINE_DEBUG_STR " id=%d", LINE_DEBUG_DATA(fPart.fCurve), |
| this->segment()->debugID()); |
| break; |
| case SkPath::kQuad_Verb: |
| result.printf(QUAD_DEBUG_STR " id=%d", QUAD_DEBUG_DATA(fPart.fCurve), |
| this->segment()->debugID()); |
| break; |
| case SkPath::kConic_Verb: |
| result.printf(CONIC_DEBUG_STR " id=%d", |
| CONIC_DEBUG_DATA(fPart.fCurve, fPart.fCurve.fConic.fWeight), |
| this->segment()->debugID()); |
| break; |
| case SkPath::kCubic_Verb: |
| result.printf(CUBIC_DEBUG_STR " id=%d", CUBIC_DEBUG_DATA(fPart.fCurve), |
| this->segment()->debugID()); |
| break; |
| default: |
| SkASSERT(0); |
| } |
| return result; |
| } |
| #endif |
| |
| #if DEBUG_SORT |
| void SkOpAngle::debugLoop() const { |
| const SkOpAngle* first = this; |
| const SkOpAngle* next = this; |
| do { |
| next->dumpOne(true); |
| SkDebugf("\n"); |
| next = next->fNext; |
| } while (next && next != first); |
| next = first; |
| do { |
| next->debugValidate(); |
| next = next->fNext; |
| } while (next && next != first); |
| } |
| #endif |
| |
| void SkOpAngle::debugValidate() const { |
| #if DEBUG_COINCIDENCE |
| if (this->globalState()->debugCheckHealth()) { |
| return; |
| } |
| #endif |
| #if DEBUG_VALIDATE |
| const SkOpAngle* first = this; |
| const SkOpAngle* next = this; |
| int wind = 0; |
| int opp = 0; |
| int lastXor = -1; |
| int lastOppXor = -1; |
| do { |
| if (next->unorderable()) { |
| return; |
| } |
| const SkOpSpan* minSpan = next->start()->starter(next->end()); |
| if (minSpan->windValue() == SK_MinS32) { |
| return; |
| } |
| bool op = next->segment()->operand(); |
| bool isXor = next->segment()->isXor(); |
| bool oppXor = next->segment()->oppXor(); |
| SkASSERT(!DEBUG_LIMIT_WIND_SUM || between(0, minSpan->windValue(), DEBUG_LIMIT_WIND_SUM)); |
| SkASSERT(!DEBUG_LIMIT_WIND_SUM |
| || between(-DEBUG_LIMIT_WIND_SUM, minSpan->oppValue(), DEBUG_LIMIT_WIND_SUM)); |
| bool useXor = op ? oppXor : isXor; |
| SkASSERT(lastXor == -1 || lastXor == (int) useXor); |
| lastXor = (int) useXor; |
| wind += next->debugSign() * (op ? minSpan->oppValue() : minSpan->windValue()); |
| if (useXor) { |
| wind &= 1; |
| } |
| useXor = op ? isXor : oppXor; |
| SkASSERT(lastOppXor == -1 || lastOppXor == (int) useXor); |
| lastOppXor = (int) useXor; |
| opp += next->debugSign() * (op ? minSpan->windValue() : minSpan->oppValue()); |
| if (useXor) { |
| opp &= 1; |
| } |
| next = next->fNext; |
| } while (next && next != first); |
| SkASSERT(wind == 0 || !SkPathOpsDebug::gRunFail); |
| SkASSERT(opp == 0 || !SkPathOpsDebug::gRunFail); |
| #endif |
| } |
| |
| void SkOpAngle::debugValidateNext() const { |
| #if !FORCE_RELEASE |
| const SkOpAngle* first = this; |
| const SkOpAngle* next = first; |
| SkTDArray<const SkOpAngle*>(angles); |
| do { |
| // SkASSERT_RELEASE(next->fSegment->debugContains(next)); |
| angles.push_back(next); |
| next = next->next(); |
| if (next == first) { |
| break; |
| } |
| SkASSERT_RELEASE(!angles.contains(next)); |
| if (!next) { |
| return; |
| } |
| } while (true); |
| #endif |
| } |
| |
| #ifdef SK_DEBUG |
| void SkCoincidentSpans::debugStartCheck(const SkOpSpanBase* outer, const SkOpSpanBase* over, |
| const SkOpGlobalState* debugState) const { |
| SkASSERT(coinPtTEnd()->span() == over || !SkOpGlobalState::DebugRunFail()); |
| SkASSERT(oppPtTEnd()->span() == outer || !SkOpGlobalState::DebugRunFail()); |
| } |
| #endif |
| |
| #if DEBUG_COIN |
| // sets the span's end to the ptT referenced by the previous-next |
| void SkCoincidentSpans::debugCorrectOneEnd(SkPathOpsDebug::GlitchLog* log, |
| const SkOpPtT* (SkCoincidentSpans::* getEnd)() const, |
| void (SkCoincidentSpans::*setEnd)(const SkOpPtT* ptT) const ) const { |
| const SkOpPtT* origPtT = (this->*getEnd)(); |
| const SkOpSpanBase* origSpan = origPtT->span(); |
| const SkOpSpan* prev = origSpan->prev(); |
| const SkOpPtT* testPtT = prev ? prev->next()->ptT() |
| : origSpan->upCast()->next()->prev()->ptT(); |
| if (origPtT != testPtT) { |
| log->record(SkPathOpsDebug::kCorrectEnd_Glitch, this, origPtT, testPtT); |
| } |
| } |
| |
| |
| /* Commented-out lines keep this in sync with correctEnds */ |
| // FIXME: member pointers have fallen out of favor and can be replaced with |
| // an alternative approach. |
| // makes all span ends agree with the segment's spans that define them |
| void SkCoincidentSpans::debugCorrectEnds(SkPathOpsDebug::GlitchLog* log) const { |
| this->debugCorrectOneEnd(log, &SkCoincidentSpans::coinPtTStart, nullptr); |
| this->debugCorrectOneEnd(log, &SkCoincidentSpans::coinPtTEnd, nullptr); |
| this->debugCorrectOneEnd(log, &SkCoincidentSpans::oppPtTStart, nullptr); |
| this->debugCorrectOneEnd(log, &SkCoincidentSpans::oppPtTEnd, nullptr); |
| } |
| |
| /* Commented-out lines keep this in sync with expand */ |
| // expand the range by checking adjacent spans for coincidence |
| bool SkCoincidentSpans::debugExpand(SkPathOpsDebug::GlitchLog* log) const { |
| bool expanded = false; |
| const SkOpSegment* segment = coinPtTStart()->segment(); |
| const SkOpSegment* oppSegment = oppPtTStart()->segment(); |
| do { |
| const SkOpSpan* start = coinPtTStart()->span()->upCast(); |
| const SkOpSpan* prev = start->prev(); |
| const SkOpPtT* oppPtT; |
| if (!prev || !(oppPtT = prev->contains(oppSegment))) { |
| break; |
| } |
| double midT = (prev->t() + start->t()) / 2; |
| if (!segment->isClose(midT, oppSegment)) { |
| break; |
| } |
| if (log) log->record(SkPathOpsDebug::kExpandCoin_Glitch, this, prev->ptT(), oppPtT); |
| expanded = true; |
| } while (false); // actual continues while expansion is possible |
| do { |
| const SkOpSpanBase* end = coinPtTEnd()->span(); |
| SkOpSpanBase* next = end->final() ? nullptr : end->upCast()->next(); |
| if (next && next->deleted()) { |
| break; |
| } |
| const SkOpPtT* oppPtT; |
| if (!next || !(oppPtT = next->contains(oppSegment))) { |
| break; |
| } |
| double midT = (end->t() + next->t()) / 2; |
| if (!segment->isClose(midT, oppSegment)) { |
| break; |
| } |
| if (log) log->record(SkPathOpsDebug::kExpandCoin_Glitch, this, next->ptT(), oppPtT); |
| expanded = true; |
| } while (false); // actual continues while expansion is possible |
| return expanded; |
| } |
| |
| // description below |
| void SkOpCoincidence::debugAddEndMovedSpans(SkPathOpsDebug::GlitchLog* log, const SkOpSpan* base, const SkOpSpanBase* testSpan) const { |
| const SkOpPtT* testPtT = testSpan->ptT(); |
| const SkOpPtT* stopPtT = testPtT; |
| const SkOpSegment* baseSeg = base->segment(); |
| while ((testPtT = testPtT->next()) != stopPtT) { |
| const SkOpSegment* testSeg = testPtT->segment(); |
| if (testPtT->deleted()) { |
| continue; |
| } |
| if (testSeg == baseSeg) { |
| continue; |
| } |
| if (testPtT->span()->ptT() != testPtT) { |
| continue; |
| } |
| if (this->contains(baseSeg, testSeg, testPtT->fT)) { |
| continue; |
| } |
| // intersect perp with base->ptT() with testPtT->segment() |
| SkDVector dxdy = baseSeg->dSlopeAtT(base->t()); |
| const SkPoint& pt = base->pt(); |
| SkDLine ray = {{{pt.fX, pt.fY}, {pt.fX + dxdy.fY, pt.fY - dxdy.fX}}}; |
| SkIntersections i; |
| (*CurveIntersectRay[testSeg->verb()])(testSeg->pts(), testSeg->weight(), ray, &i); |
| for (int index = 0; index < i.used(); ++index) { |
| double t = i[0][index]; |
| if (!between(0, t, 1)) { |
| continue; |
| } |
| SkDPoint oppPt = i.pt(index); |
| if (!oppPt.approximatelyEqual(pt)) { |
| continue; |
| } |
| SkOpSegment* writableSeg = const_cast<SkOpSegment*>(testSeg); |
| SkOpPtT* oppStart = writableSeg->addT(t); |
| if (oppStart == testPtT) { |
| continue; |
| } |
| SkOpSpan* writableBase = const_cast<SkOpSpan*>(base); |
| oppStart->span()->addOpp(writableBase); |
| if (oppStart->deleted()) { |
| continue; |
| } |
| SkOpSegment* coinSeg = base->segment(); |
| SkOpSegment* oppSeg = oppStart->segment(); |
| double coinTs, coinTe, oppTs, oppTe; |
| if (Ordered(coinSeg, oppSeg)) { |
| coinTs = base->t(); |
| coinTe = testSpan->t(); |
| oppTs = oppStart->fT; |
| oppTe = testPtT->fT; |
| } else { |
| using std::swap; |
| swap(coinSeg, oppSeg); |
| coinTs = oppStart->fT; |
| coinTe = testPtT->fT; |
| oppTs = base->t(); |
| oppTe = testSpan->t(); |
| } |
| if (coinTs > coinTe) { |
| using std::swap; |
| swap(coinTs, coinTe); |
| swap(oppTs, oppTe); |
| } |
| bool added; |
| if (this->debugAddOrOverlap(log, coinSeg, oppSeg, coinTs, coinTe, oppTs, oppTe, &added), false) { |
| return; |
| } |
| } |
| } |
| return; |
| } |
| |
| // description below |
| void SkOpCoincidence::debugAddEndMovedSpans(SkPathOpsDebug::GlitchLog* log, const SkOpPtT* ptT) const { |
| FAIL_IF(!ptT->span()->upCastable(), ptT->span()); |
| const SkOpSpan* base = ptT->span()->upCast(); |
| const SkOpSpan* prev = base->prev(); |
| FAIL_IF(!prev, ptT->span()); |
| if (!prev->isCanceled()) { |
| if (this->debugAddEndMovedSpans(log, base, base->prev()), false) { |
| return; |
| } |
| } |
| if (!base->isCanceled()) { |
| if (this->debugAddEndMovedSpans(log, base, base->next()), false) { |
| return; |
| } |
| } |
| return; |
| } |
| |
| /* If A is coincident with B and B includes an endpoint, and A's matching point |
| is not the endpoint (i.e., there's an implied line connecting B-end and A) |
| then assume that the same implied line may intersect another curve close to B. |
| Since we only care about coincidence that was undetected, look at the |
| ptT list on B-segment adjacent to the B-end/A ptT loop (not in the loop, but |
| next door) and see if the A matching point is close enough to form another |
| coincident pair. If so, check for a new coincident span between B-end/A ptT loop |
| and the adjacent ptT loop. |
| */ |
| void SkOpCoincidence::debugAddEndMovedSpans(SkPathOpsDebug::GlitchLog* log) const { |
| const SkCoincidentSpans* span = fHead; |
| if (!span) { |
| return; |
| } |
| // fTop = span; |
| // fHead = nullptr; |
| do { |
| if (span->coinPtTStart()->fPt != span->oppPtTStart()->fPt) { |
| FAIL_IF(1 == span->coinPtTStart()->fT, span); |
| bool onEnd = span->coinPtTStart()->fT == 0; |
| bool oOnEnd = zero_or_one(span->oppPtTStart()->fT); |
| if (onEnd) { |
| if (!oOnEnd) { // if both are on end, any nearby intersect was already found |
| if (this->debugAddEndMovedSpans(log, span->oppPtTStart()), false) { |
| return; |
| } |
| } |
| } else if (oOnEnd) { |
| if (this->debugAddEndMovedSpans(log, span->coinPtTStart()), false) { |
| return; |
| } |
| } |
| } |
| if (span->coinPtTEnd()->fPt != span->oppPtTEnd()->fPt) { |
| bool onEnd = span->coinPtTEnd()->fT == 1; |
| bool oOnEnd = zero_or_one(span->oppPtTEnd()->fT); |
| if (onEnd) { |
| if (!oOnEnd) { |
| if (this->debugAddEndMovedSpans(log, span->oppPtTEnd()), false) { |
| return; |
| } |
| } |
| } else if (oOnEnd) { |
| if (this->debugAddEndMovedSpans(log, span->coinPtTEnd()), false) { |
| return; |
| } |
| } |
| } |
| } while ((span = span->next())); |
| // this->restoreHead(); |
| return; |
| } |
| |
| /* Commented-out lines keep this in sync with addExpanded */ |
| // for each coincident pair, match the spans |
| // if the spans don't match, add the mssing pt to the segment and loop it in the opposite span |
| void SkOpCoincidence::debugAddExpanded(SkPathOpsDebug::GlitchLog* log) const { |
| // DEBUG_SET_PHASE(); |
| const SkCoincidentSpans* coin = this->fHead; |
| if (!coin) { |
| return; |
| } |
| do { |
| const SkOpPtT* startPtT = coin->coinPtTStart(); |
| const SkOpPtT* oStartPtT = coin->oppPtTStart(); |
| double priorT = startPtT->fT; |
| double oPriorT = oStartPtT->fT; |
| FAIL_IF(!startPtT->contains(oStartPtT), coin); |
| SkOPASSERT(coin->coinPtTEnd()->contains(coin->oppPtTEnd())); |
| const SkOpSpanBase* start = startPtT->span(); |
| const SkOpSpanBase* oStart = oStartPtT->span(); |
| const SkOpSpanBase* end = coin->coinPtTEnd()->span(); |
| const SkOpSpanBase* oEnd = coin->oppPtTEnd()->span(); |
| FAIL_IF(oEnd->deleted(), coin); |
| FAIL_IF(!start->upCastable(), coin); |
| const SkOpSpanBase* test = start->upCast()->next(); |
| FAIL_IF(!coin->flipped() && !oStart->upCastable(), coin); |
| const SkOpSpanBase* oTest = coin->flipped() ? oStart->prev() : oStart->upCast()->next(); |
| FAIL_IF(!oTest, coin); |
| const SkOpSegment* seg = start->segment(); |
| const SkOpSegment* oSeg = oStart->segment(); |
| while (test != end || oTest != oEnd) { |
| const SkOpPtT* containedOpp = test->ptT()->contains(oSeg); |
| const SkOpPtT* containedThis = oTest->ptT()->contains(seg); |
| if (!containedOpp || !containedThis) { |
| // choose the ends, or the first common pt-t list shared by both |
| double nextT, oNextT; |
| if (containedOpp) { |
| nextT = test->t(); |
| oNextT = containedOpp->fT; |
| } else if (containedThis) { |
| nextT = containedThis->fT; |
| oNextT = oTest->t(); |
| } else { |
| // iterate through until a pt-t list found that contains the other |
| const SkOpSpanBase* walk = test; |
| const SkOpPtT* walkOpp; |
| do { |
| FAIL_IF(!walk->upCastable(), coin); |
| walk = walk->upCast()->next(); |
| } while (!(walkOpp = walk->ptT()->contains(oSeg)) |
| && walk != coin->coinPtTEnd()->span()); |
| FAIL_IF(!walkOpp, coin); |
| nextT = walk->t(); |
| oNextT = walkOpp->fT; |
| } |
| // use t ranges to guess which one is missing |
| double startRange = nextT - priorT; |
| FAIL_IF(!startRange, coin); |
| double startPart = (test->t() - priorT) / startRange; |
| double oStartRange = oNextT - oPriorT; |
| FAIL_IF(!oStartRange, coin); |
| double oStartPart = (oTest->t() - oStartPtT->fT) / oStartRange; |
| FAIL_IF(startPart == oStartPart, coin); |
| bool addToOpp = !containedOpp && !containedThis ? startPart < oStartPart |
| : !!containedThis; |
| bool startOver = false; |
| addToOpp ? log->record(SkPathOpsDebug::kAddExpandedCoin_Glitch, |
| oPriorT + oStartRange * startPart, test) |
| : log->record(SkPathOpsDebug::kAddExpandedCoin_Glitch, |
| priorT + startRange * oStartPart, oTest); |
| // FAIL_IF(!success, coin); |
| if (startOver) { |
| test = start; |
| oTest = oStart; |
| } |
| end = coin->coinPtTEnd()->span(); |
| oEnd = coin->oppPtTEnd()->span(); |
| } |
| if (test != end) { |
| FAIL_IF(!test->upCastable(), coin); |
| priorT = test->t(); |
| test = test->upCast()->next(); |
| } |
| if (oTest != oEnd) { |
| oPriorT = oTest->t(); |
| oTest = coin->flipped() ? oTest->prev() : oTest->upCast()->next(); |
| FAIL_IF(!oTest, coin); |
| } |
| } |
| } while ((coin = coin->next())); |
| return; |
| } |
| |
| /* Commented-out lines keep this in sync addIfMissing() */ |
| // note that over1s, over1e, over2s, over2e are ordered |
| void SkOpCoincidence::debugAddIfMissing(SkPathOpsDebug::GlitchLog* log, const SkOpPtT* over1s, const SkOpPtT* over2s, |
| double tStart, double tEnd, const SkOpSegment* coinSeg, const SkOpSegment* oppSeg, bool* added, |
| const SkOpPtT* over1e, const SkOpPtT* over2e) const { |
| SkASSERT(tStart < tEnd); |
| SkASSERT(over1s->fT < over1e->fT); |
| SkASSERT(between(over1s->fT, tStart, over1e->fT)); |
| SkASSERT(between(over1s->fT, tEnd, over1e->fT)); |
| SkASSERT(over2s->fT < over2e->fT); |
| SkASSERT(between(over2s->fT, tStart, over2e->fT)); |
| SkASSERT(between(over2s->fT, tEnd, over2e->fT)); |
| SkASSERT(over1s->segment() == over1e->segment()); |
| SkASSERT(over2s->segment() == over2e->segment()); |
| SkASSERT(over1s->segment() == over2s->segment()); |
| SkASSERT(over1s->segment() != coinSeg); |
| SkASSERT(over1s->segment() != oppSeg); |
| SkASSERT(coinSeg != oppSeg); |
| double coinTs, coinTe, oppTs, oppTe; |
| coinTs = TRange(over1s, tStart, coinSeg SkDEBUGPARAMS(over1e)); |
| coinTe = TRange(over1s, tEnd, coinSeg SkDEBUGPARAMS(over1e)); |
| SkOpSpanBase::Collapsed result = coinSeg->collapsed(coinTs, coinTe); |
| if (SkOpSpanBase::Collapsed::kNo != result) { |
| return log->record(SkPathOpsDebug::kAddIfCollapsed_Glitch, coinSeg); |
| } |
| oppTs = TRange(over2s, tStart, oppSeg SkDEBUGPARAMS(over2e)); |
| oppTe = TRange(over2s, tEnd, oppSeg SkDEBUGPARAMS(over2e)); |
| result = oppSeg->collapsed(oppTs, oppTe); |
| if (SkOpSpanBase::Collapsed::kNo != result) { |
| return log->record(SkPathOpsDebug::kAddIfCollapsed_Glitch, oppSeg); |
| } |
| if (coinTs > coinTe) { |
| using std::swap; |
| swap(coinTs, coinTe); |
| swap(oppTs, oppTe); |
| } |
| this->debugAddOrOverlap(log, coinSeg, oppSeg, coinTs, coinTe, oppTs, oppTe, added); |
| return; |
| } |
| |
| /* Commented-out lines keep this in sync addOrOverlap() */ |
| // If this is called by addEndMovedSpans(), a returned false propogates out to an abort. |
| // If this is called by AddIfMissing(), a returned false indicates there was nothing to add |
| void SkOpCoincidence::debugAddOrOverlap(SkPathOpsDebug::GlitchLog* log, |
| const SkOpSegment* coinSeg, const SkOpSegment* oppSeg, |
| double coinTs, double coinTe, double oppTs, double oppTe, bool* added) const { |
| SkTDArray<SkCoincidentSpans*> overlaps; |
| SkOPASSERT(!fTop); // this is (correctly) reversed in addifMissing() |
| if (fTop && !this->checkOverlap(fTop, coinSeg, oppSeg, coinTs, coinTe, oppTs, oppTe, |
| &overlaps)) { |
| return; |
| } |
| if (fHead && !this->checkOverlap(fHead, coinSeg, oppSeg, coinTs, |
| coinTe, oppTs, oppTe, &overlaps)) { |
| return; |
| } |
| const SkCoincidentSpans* overlap = overlaps.count() ? overlaps[0] : nullptr; |
| for (int index = 1; index < overlaps.count(); ++index) { // combine overlaps before continuing |
| const SkCoincidentSpans* test = overlaps[index]; |
| if (overlap->coinPtTStart()->fT > test->coinPtTStart()->fT) { |
| log->record(SkPathOpsDebug::kAddOrOverlap_Glitch, overlap, test->coinPtTStart()); |
| } |
| if (overlap->coinPtTEnd()->fT < test->coinPtTEnd()->fT) { |
| log->record(SkPathOpsDebug::kAddOrOverlap_Glitch, overlap, test->coinPtTEnd()); |
| } |
| if (overlap->flipped() |
| ? overlap->oppPtTStart()->fT < test->oppPtTStart()->fT |
| : overlap->oppPtTStart()->fT > test->oppPtTStart()->fT) { |
| log->record(SkPathOpsDebug::kAddOrOverlap_Glitch, overlap, test->oppPtTStart()); |
| } |
| if (overlap->flipped() |
| ? overlap->oppPtTEnd()->fT > test->oppPtTEnd()->fT |
| : overlap->oppPtTEnd()->fT < test->oppPtTEnd()->fT) { |
| log->record(SkPathOpsDebug::kAddOrOverlap_Glitch, overlap, test->oppPtTEnd()); |
| } |
| if (!fHead) { this->debugRelease(log, fHead, test); |
| this->debugRelease(log, fTop, test); |
| } |
| } |
| const SkOpPtT* cs = coinSeg->existing(coinTs, oppSeg); |
| const SkOpPtT* ce = coinSeg->existing(coinTe, oppSeg); |
| RETURN_FALSE_IF(overlap && cs && ce && overlap->contains(cs, ce), coinSeg); |
| RETURN_FALSE_IF(cs != ce || !cs, coinSeg); |
| const SkOpPtT* os = oppSeg->existing(oppTs, coinSeg); |
| const SkOpPtT* oe = oppSeg->existing(oppTe, coinSeg); |
| RETURN_FALSE_IF(overlap && os && oe && overlap->contains(os, oe), oppSeg); |
| SkASSERT(true || !cs || !cs->deleted()); |
| SkASSERT(true || !os || !os->deleted()); |
| SkASSERT(true || !ce || !ce->deleted()); |
| SkASSERT(true || !oe || !oe->deleted()); |
| const SkOpPtT* csExisting = !cs ? coinSeg->existing(coinTs, nullptr) : nullptr; |
| const SkOpPtT* ceExisting = !ce ? coinSeg->existing(coinTe, nullptr) : nullptr; |
| RETURN_FALSE_IF(csExisting && csExisting == ceExisting, coinSeg); |
| RETURN_FALSE_IF(csExisting && (csExisting == ce || |
| csExisting->contains(ceExisting ? ceExisting : ce)), coinSeg); |
| RETURN_FALSE_IF(ceExisting && (ceExisting == cs || |
| ceExisting->contains(csExisting ? csExisting : cs)), coinSeg); |
| const SkOpPtT* osExisting = !os ? oppSeg->existing(oppTs, nullptr) : nullptr; |
| const SkOpPtT* oeExisting = !oe ? oppSeg->existing(oppTe, nullptr) : nullptr; |
| RETURN_FALSE_IF(osExisting && osExisting == oeExisting, oppSeg); |
| RETURN_FALSE_IF(osExisting && (osExisting == oe || |
| osExisting->contains(oeExisting ? oeExisting : oe)), oppSeg); |
| RETURN_FALSE_IF(oeExisting && (oeExisting == os || |
| oeExisting->contains(osExisting ? osExisting : os)), oppSeg); |
| bool csDeleted = false, osDeleted = false, ceDeleted = false, oeDeleted = false; |
| this->debugValidate(); |
| if (!cs || !os) { |
| if (!cs) |
| cs = coinSeg->debugAddT(coinTs, log); |
| if (!os) |
| os = oppSeg->debugAddT(oppTs, log); |
| // RETURN_FALSE_IF(callerAborts, !csWritable || !osWritable); |
| if (cs && os) cs->span()->debugAddOpp(log, os->span()); |
| // cs = csWritable; |
| // os = osWritable->active(); |
| RETURN_FALSE_IF((ce && ce->deleted()) || (oe && oe->deleted()), coinSeg); |
| } |
| if (!ce || !oe) { |
| if (!ce) |
| ce = coinSeg->debugAddT(coinTe, log); |
| if (!oe) |
| oe = oppSeg->debugAddT(oppTe, log); |
| if (ce && oe) ce->span()->debugAddOpp(log, oe->span()); |
| // ce = ceWritable; |
| // oe = oeWritable; |
| } |
| this->debugValidate(); |
| RETURN_FALSE_IF(csDeleted, coinSeg); |
| RETURN_FALSE_IF(osDeleted, oppSeg); |
| RETURN_FALSE_IF(ceDeleted, coinSeg); |
| RETURN_FALSE_IF(oeDeleted, oppSeg); |
| RETURN_FALSE_IF(!cs || !ce || cs == ce || cs->contains(ce) || !os || !oe || os == oe || os->contains(oe), coinSeg); |
| bool result = true; |
| if (overlap) { |
| if (overlap->coinPtTStart()->segment() == coinSeg) { |
| log->record(SkPathOpsDebug::kAddMissingExtend_Glitch, coinSeg, coinTs, coinTe, oppSeg, oppTs, oppTe); |
| } else { |
| if (oppTs > oppTe) { |
| using std::swap; |
| swap(coinTs, coinTe); |
| swap(oppTs, oppTe); |
| } |
| log->record(SkPathOpsDebug::kAddMissingExtend_Glitch, oppSeg, oppTs, oppTe, coinSeg, coinTs, coinTe); |
| } |
| #if 0 && DEBUG_COINCIDENCE_VERBOSE |
| if (result) { |
| overlap->debugShow(); |
| } |
| #endif |
| } else { |
| log->record(SkPathOpsDebug::kAddMissingCoin_Glitch, coinSeg, coinTs, coinTe, oppSeg, oppTs, oppTe); |
| #if 0 && DEBUG_COINCIDENCE_VERBOSE |
| fHead->debugShow(); |
| #endif |
| } |
| this->debugValidate(); |
| return (void) result; |
| } |
| |
| // Extra commented-out lines keep this in sync with addMissing() |
| /* detects overlaps of different coincident runs on same segment */ |
| /* does not detect overlaps for pairs without any segments in common */ |
| // returns true if caller should loop again |
| void SkOpCoincidence::debugAddMissing(SkPathOpsDebug::GlitchLog* log, bool* added) const { |
| const SkCoincidentSpans* outer = fHead; |
| *added = false; |
| if (!outer) { |
| return; |
| } |
| // fTop = outer; |
| // fHead = nullptr; |
| do { |
| // addifmissing can modify the list that this is walking |
| // save head so that walker can iterate over old data unperturbed |
| // addifmissing adds to head freely then add saved head in the end |
| const SkOpPtT* ocs = outer->coinPtTStart(); |
| SkASSERT(!ocs->deleted()); |
| const SkOpSegment* outerCoin = ocs->segment(); |
| SkASSERT(!outerCoin->done()); // if it's done, should have already been removed from list |
| const SkOpPtT* oos = outer->oppPtTStart(); |
| if (oos->deleted()) { |
| return; |
| } |
| const SkOpSegment* outerOpp = oos->segment(); |
| SkASSERT(!outerOpp->done()); |
| // SkOpSegment* outerCoinWritable = const_cast<SkOpSegment*>(outerCoin); |
| // SkOpSegment* outerOppWritable = const_cast<SkOpSegment*>(outerOpp); |
| const SkCoincidentSpans* inner = outer; |
| while ((inner = inner->next())) { |
| this->debugValidate(); |
| double overS, overE; |
| const SkOpPtT* ics = inner->coinPtTStart(); |
| SkASSERT(!ics->deleted()); |
| const SkOpSegment* innerCoin = ics->segment(); |
| SkASSERT(!innerCoin->done()); |
| const SkOpPtT* ios = inner->oppPtTStart(); |
| SkASSERT(!ios->deleted()); |
| const SkOpSegment* innerOpp = ios->segment(); |
| SkASSERT(!innerOpp->done()); |
| // SkOpSegment* innerCoinWritable = const_cast<SkOpSegment*>(innerCoin); |
| // SkOpSegment* innerOppWritable = const_cast<SkOpSegment*>(innerOpp); |
| if (outerCoin == innerCoin) { |
| const SkOpPtT* oce = outer->coinPtTEnd(); |
| if (oce->deleted()) { |
| return; |
| } |
| const SkOpPtT* ice = inner->coinPtTEnd(); |
| SkASSERT(!ice->deleted()); |
| if (outerOpp != innerOpp && this->overlap(ocs, oce, ics, ice, &overS, &overE)) { |
| this->debugAddIfMissing(log, ocs->starter(oce), ics->starter(ice), |
| overS, overE, outerOpp, innerOpp, added, |
| ocs->debugEnder(oce), |
| ics->debugEnder(ice)); |
| } |
| } else if (outerCoin == innerOpp) { |
| const SkOpPtT* oce = outer->coinPtTEnd(); |
| SkASSERT(!oce->deleted()); |
| const SkOpPtT* ioe = inner->oppPtTEnd(); |
| SkASSERT(!ioe->deleted()); |
| if (outerOpp != innerCoin && this->overlap(ocs, oce, ios, ioe, &overS, &overE)) { |
| this->debugAddIfMissing(log, ocs->starter(oce), ios->starter(ioe), |
| overS, overE, outerOpp, innerCoin, added, |
| ocs->debugEnder(oce), |
| ios->debugEnder(ioe)); |
| } |
| } else if (outerOpp == innerCoin) { |
| const SkOpPtT* ooe = outer->oppPtTEnd(); |
| SkASSERT(!ooe->deleted()); |
| const SkOpPtT* ice = inner->coinPtTEnd(); |
| SkASSERT(!ice->deleted()); |
| SkASSERT(outerCoin != innerOpp); |
| if (this->overlap(oos, ooe, ics, ice, &overS, &overE)) { |
| this->debugAddIfMissing(log, oos->starter(ooe), ics->starter(ice), |
| overS, overE, outerCoin, innerOpp, added, |
| oos->debugEnder(ooe), |
| ics->debugEnder(ice)); |
| } |
| } else if (outerOpp == innerOpp) { |
| const SkOpPtT* ooe = outer->oppPtTEnd(); |
| SkASSERT(!ooe->deleted()); |
| const SkOpPtT* ioe = inner->oppPtTEnd(); |
| if (ioe->deleted()) { |
| return; |
| } |
| SkASSERT(outerCoin != innerCoin); |
| if (this->overlap(oos, ooe, ios, ioe, &overS, &overE)) { |
| this->debugAddIfMissing(log, oos->starter(ooe), ios->starter(ioe), |
| overS, overE, outerCoin, innerCoin, added, |
| oos->debugEnder(ooe), |
| ios->debugEnder(ioe)); |
| } |
| } |
| this->debugValidate(); |
| } |
| } while ((outer = outer->next())); |
| // this->restoreHead(); |
| return; |
| } |
| |
| // Commented-out lines keep this in sync with release() |
| void SkOpCoincidence::debugRelease(SkPathOpsDebug::GlitchLog* log, const SkCoincidentSpans* coin, const SkCoincidentSpans* remove) const { |
| const SkCoincidentSpans* head = coin; |
| const SkCoincidentSpans* prev = nullptr; |
| const SkCoincidentSpans* next; |
| do { |
| next = coin->next(); |
| if (coin == remove) { |
| if (prev) { |
| // prev->setNext(next); |
| } else if (head == fHead) { |
| // fHead = next; |
| } else { |
| // fTop = next; |
| } |
| log->record(SkPathOpsDebug::kReleasedSpan_Glitch, coin); |
| } |
| prev = coin; |
| } while ((coin = next)); |
| return; |
| } |
| |
| void SkOpCoincidence::debugRelease(SkPathOpsDebug::GlitchLog* log, const SkOpSegment* deleted) const { |
| const SkCoincidentSpans* coin = fHead; |
| if (!coin) { |
| return; |
| } |
| do { |
| if (coin->coinPtTStart()->segment() == deleted |
| || coin->coinPtTEnd()->segment() == deleted |
| || coin->oppPtTStart()->segment() == deleted |
| || coin->oppPtTEnd()->segment() == deleted) { |
| log->record(SkPathOpsDebug::kReleasedSpan_Glitch, coin); |
| } |
| } while ((coin = coin->next())); |
| } |
| |
| // Commented-out lines keep this in sync with expand() |
| // expand the range by checking adjacent spans for coincidence |
| bool SkOpCoincidence::debugExpand(SkPathOpsDebug::GlitchLog* log) const { |
| const SkCoincidentSpans* coin = fHead; |
| if (!coin) { |
| return false; |
| } |
| bool expanded = false; |
| do { |
| if (coin->debugExpand(log)) { |
| // check to see if multiple spans expanded so they are now identical |
| const SkCoincidentSpans* test = fHead; |
| do { |
| if (coin == test) { |
| continue; |
| } |
| if (coin->coinPtTStart() == test->coinPtTStart() |
| && coin->oppPtTStart() == test->oppPtTStart()) { |
| if (log) log->record(SkPathOpsDebug::kExpandCoin_Glitch, fHead, test->coinPtTStart()); |
| break; |
| } |
| } while ((test = test->next())); |
| expanded = true; |
| } |
| } while ((coin = coin->next())); |
| return expanded; |
| } |
| |
| // Commented-out lines keep this in sync with mark() |
| /* this sets up the coincidence links in the segments when the coincidence crosses multiple spans */ |
| void SkOpCoincidence::debugMark(SkPathOpsDebug::GlitchLog* log) const { |
| const SkCoincidentSpans* coin = fHead; |
| if (!coin) { |
| return; |
| } |
| do { |
| FAIL_IF(!coin->coinPtTStartWritable()->span()->upCastable(), coin); |
| const SkOpSpan* start = coin->coinPtTStartWritable()->span()->upCast(); |
| // SkASSERT(start->deleted()); |
| const SkOpSpanBase* end = coin->coinPtTEndWritable()->span(); |
| // SkASSERT(end->deleted()); |
| const SkOpSpanBase* oStart = coin->oppPtTStartWritable()->span(); |
| // SkASSERT(oStart->deleted()); |
| const SkOpSpanBase* oEnd = coin->oppPtTEndWritable()->span(); |
| // SkASSERT(oEnd->deleted()); |
| bool flipped = coin->flipped(); |
| if (flipped) { |
| using std::swap; |
| swap(oStart, oEnd); |
| } |
| /* coin and opp spans may not match up. Mark the ends, and then let the interior |
| get marked as many times as the spans allow */ |
| start->debugInsertCoincidence(log, oStart->upCast()); |
| end->debugInsertCoinEnd(log, oEnd); |
| const SkOpSegment* segment = start->segment(); |
| const SkOpSegment* oSegment = oStart->segment(); |
| const SkOpSpanBase* next = start; |
| const SkOpSpanBase* oNext = oStart; |
| bool ordered; |
| FAIL_IF(!coin->ordered(&ordered), coin); |
| while ((next = next->upCast()->next()) != end) { |
| FAIL_IF(!next->upCastable(), coin); |
| if (next->upCast()->debugInsertCoincidence(log, oSegment, flipped, ordered), false) { |
| return; |
| } |
| } |
| while ((oNext = oNext->upCast()->next()) != oEnd) { |
| FAIL_IF(!oNext->upCastable(), coin); |
| if (oNext->upCast()->debugInsertCoincidence(log, segment, flipped, ordered), false) { |
| return; |
| } |
| } |
| } while ((coin = coin->next())); |
| return; |
| } |
| #endif |
| |
| #if DEBUG_COIN |
| // Commented-out lines keep this in sync with markCollapsed() |
| void SkOpCoincidence::debugMarkCollapsed(SkPathOpsDebug::GlitchLog* log, const SkCoincidentSpans* coin, const SkOpPtT* test) const { |
| const SkCoincidentSpans* head = coin; |
| while (coin) { |
| if (coin->collapsed(test)) { |
| if (zero_or_one(coin->coinPtTStart()->fT) && zero_or_one(coin->coinPtTEnd()->fT)) { |
| log->record(SkPathOpsDebug::kCollapsedCoin_Glitch, coin); |
| } |
| if (zero_or_one(coin->oppPtTStart()->fT) && zero_or_one(coin->oppPtTEnd()->fT)) { |
| log->record(SkPathOpsDebug::kCollapsedCoin_Glitch, coin); |
| } |
| this->debugRelease(log, head, coin); |
| } |
| coin = coin->next(); |
| } |
| } |
| |
| // Commented-out lines keep this in sync with markCollapsed() |
| void SkOpCoincidence::debugMarkCollapsed(SkPathOpsDebug::GlitchLog* log, const SkOpPtT* test) const { |
| this->debugMarkCollapsed(log, fHead, test); |
| this->debugMarkCollapsed(log, fTop, test); |
| } |
| #endif |
| |
| void SkCoincidentSpans::debugShow() const { |
| SkDebugf("coinSpan - id=%d t=%1.9g tEnd=%1.9g\n", coinPtTStart()->segment()->debugID(), |
| coinPtTStart()->fT, coinPtTEnd()->fT); |
| SkDebugf("coinSpan + id=%d t=%1.9g tEnd=%1.9g\n", oppPtTStart()->segment()->debugID(), |
| oppPtTStart()->fT, oppPtTEnd()->fT); |
| } |
| |
| void SkOpCoincidence::debugShowCoincidence() const { |
| #if DEBUG_COINCIDENCE |
| const SkCoincidentSpans* span = fHead; |
| while (span) { |
| span->debugShow(); |
| span = span->next(); |
| } |
| #endif |
| } |
| |
| #if DEBUG_COIN |
| static void DebugCheckBetween(const SkOpSpanBase* next, const SkOpSpanBase* end, |
| double oStart, double oEnd, const SkOpSegment* oSegment, |
| SkPathOpsDebug::GlitchLog* log) { |
| SkASSERT(next != end); |
| SkASSERT(!next->contains(end) || log); |
| if (next->t() > end->t()) { |
| using std::swap; |
| swap(next, end); |
| } |
| do { |
| const SkOpPtT* ptT = next->ptT(); |
| int index = 0; |
| bool somethingBetween = false; |
| do { |
| ++index; |
| ptT = ptT->next(); |
| const SkOpPtT* checkPtT = next->ptT(); |
| if (ptT == checkPtT) { |
| break; |
| } |
| bool looped = false; |
| for (int check = 0; check < index; ++check) { |
| if ((looped = checkPtT == ptT)) { |
| break; |
| } |
| checkPtT = checkPtT->next(); |
| } |
| if (looped) { |
| SkASSERT(0); |
| break; |
| } |
| if (ptT->deleted()) { |
| continue; |
| } |
| if (ptT->segment() != oSegment) { |
| continue; |
| } |
| somethingBetween |= between(oStart, ptT->fT, oEnd); |
| } while (true); |
| SkASSERT(somethingBetween); |
| } while (next != end && (next = next->upCast()->next())); |
| } |
| |
| static void DebugCheckOverlap(const SkCoincidentSpans* test, const SkCoincidentSpans* list, |
| SkPathOpsDebug::GlitchLog* log) { |
| if (!list) { |
| return; |
| } |
| const SkOpSegment* coinSeg = test->coinPtTStart()->segment(); |
| SkASSERT(coinSeg == test->coinPtTEnd()->segment()); |
| const SkOpSegment* oppSeg = test->oppPtTStart()->segment(); |
| SkASSERT(oppSeg == test->oppPtTEnd()->segment()); |
| SkASSERT(coinSeg != test->oppPtTStart()->segment()); |
| SkDEBUGCODE(double tcs = test->coinPtTStart()->fT); |
| SkASSERT(between(0, tcs, 1)); |
| SkDEBUGCODE(double tce = test->coinPtTEnd()->fT); |
| SkASSERT(between(0, tce, 1)); |
| SkASSERT(tcs < tce); |
| double tos = test->oppPtTStart()->fT; |
| SkASSERT(between(0, tos, 1)); |
| double toe = test->oppPtTEnd()->fT; |
| SkASSERT(between(0, toe, 1)); |
| SkASSERT(tos != toe); |
| if (tos > toe) { |
| using std::swap; |
| swap(tos, toe); |
| } |
| do { |
| double lcs, lce, los, loe; |
| if (coinSeg == list->coinPtTStart()->segment()) { |
| if (oppSeg != list->oppPtTStart()->segment()) { |
| continue; |
| } |
| lcs = list->coinPtTStart()->fT; |
| lce = list->coinPtTEnd()->fT; |
| los = list->oppPtTStart()->fT; |
| loe = list->oppPtTEnd()->fT; |
| if (los > loe) { |
| using std::swap; |
| swap(los, loe); |
| } |
| } else if (coinSeg == list->oppPtTStart()->segment()) { |
| if (oppSeg != list->coinPtTStart()->segment()) { |
| continue; |
| } |
| lcs = list->oppPtTStart()->fT; |
| lce = list->oppPtTEnd()->fT; |
| if (lcs > lce) { |
| using std::swap; |
| swap(lcs, lce); |
| } |
| los = list->coinPtTStart()->fT; |
| loe = list->coinPtTEnd()->fT; |
| } else { |
| continue; |
| } |
| SkASSERT(tce < lcs || lce < tcs); |
| SkASSERT(toe < los || loe < tos); |
| } while ((list = list->next())); |
| } |
| |
| |
| static void DebugCheckOverlapTop(const SkCoincidentSpans* head, const SkCoincidentSpans* opt, |
| SkPathOpsDebug::GlitchLog* log) { |
| // check for overlapping coincident spans |
| const SkCoincidentSpans* test = head; |
| while (test) { |
| const SkCoincidentSpans* next = test->next(); |
| DebugCheckOverlap(test, next, log); |
| DebugCheckOverlap(test, opt, log); |
| test = next; |
| } |
| } |
| |
| static void DebugValidate(const SkCoincidentSpans* head, const SkCoincidentSpans* opt, |
| SkPathOpsDebug::GlitchLog* log) { |
| // look for pts inside coincident spans that are not inside the opposite spans |
| const SkCoincidentSpans* coin = head; |
| while (coin) { |
| SkASSERT(SkOpCoincidence::Ordered(coin->coinPtTStart()->segment(), |
| coin->oppPtTStart()->segment())); |
| SkASSERT(coin->coinPtTStart()->span()->ptT() == coin->coinPtTStart()); |
| SkASSERT(coin->coinPtTEnd()->span()->ptT() == coin->coinPtTEnd()); |
| SkASSERT(coin->oppPtTStart()->span()->ptT() == coin->oppPtTStart()); |
| SkASSERT(coin->oppPtTEnd()->span()->ptT() == coin->oppPtTEnd()); |
| coin = coin->next(); |
| } |
| DebugCheckOverlapTop(head, opt, log); |
| } |
| #endif |
| |
| void SkOpCoincidence::debugValidate() const { |
| #if DEBUG_COINCIDENCE |
| DebugValidate(fHead, fTop, nullptr); |
| DebugValidate(fTop, nullptr, nullptr); |
| #endif |
| } |
| |
| #if DEBUG_COIN |
| static void DebugCheckBetween(const SkCoincidentSpans* head, const SkCoincidentSpans* opt, |
| SkPathOpsDebug::GlitchLog* log) { |
| // look for pts inside coincident spans that are not inside the opposite spans |
| const SkCoincidentSpans* coin = head; |
| while (coin) { |
| DebugCheckBetween(coin->coinPtTStart()->span(), coin->coinPtTEnd()->span(), |
| coin->oppPtTStart()->fT, coin->oppPtTEnd()->fT, coin->oppPtTStart()->segment(), |
| log); |
| DebugCheckBetween(coin->oppPtTStart()->span(), coin->oppPtTEnd()->span(), |
| coin->coinPtTStart()->fT, coin->coinPtTEnd()->fT, coin->coinPtTStart()->segment(), |
| log); |
| coin = coin->next(); |
| } |
| DebugCheckOverlapTop(head, opt, log); |
| } |
| #endif |
| |
| void SkOpCoincidence::debugCheckBetween() const { |
| #if DEBUG_COINCIDENCE |
| if (fGlobalState->debugCheckHealth()) { |
| return; |
| } |
| DebugCheckBetween(fHead, fTop, nullptr); |
| DebugCheckBetween(fTop, nullptr, nullptr); |
| #endif |
| } |
| |
| #if DEBUG_COIN |
| void SkOpContour::debugCheckHealth(SkPathOpsDebug::GlitchLog* log) const { |
| const SkOpSegment* segment = &fHead; |
| do { |
| segment->debugCheckHealth(log); |
| } while ((segment = segment->next())); |
| } |
| |
| void SkOpCoincidence::debugCheckValid(SkPathOpsDebug::GlitchLog* log) const { |
| #if DEBUG_VALIDATE |
| DebugValidate(fHead, fTop, log); |
| DebugValidate(fTop, nullptr, log); |
| #endif |
| } |
| |
| void SkOpCoincidence::debugCorrectEnds(SkPathOpsDebug::GlitchLog* log) const { |
| const SkCoincidentSpans* coin = fHead; |
| if (!coin) { |
| return; |
| } |
| do { |
| coin->debugCorrectEnds(log); |
| } while ((coin = coin->next())); |
| } |
| |
| // commmented-out lines keep this aligned with missingCoincidence() |
| void SkOpContour::debugMissingCoincidence(SkPathOpsDebug::GlitchLog* log) const { |
| // SkASSERT(fCount > 0); |
| const SkOpSegment* segment = &fHead; |
| // bool result = false; |
| do { |
| if (segment->debugMissingCoincidence(log), false) { |
| // result = true; |
| } |
| segment = segment->next(); |
| } while (segment); |
| return; |
| } |
| |
| void SkOpContour::debugMoveMultiples(SkPathOpsDebug::GlitchLog* log) const { |
| SkASSERT(fCount > 0); |
| const SkOpSegment* segment = &fHead; |
| do { |
| if (segment->debugMoveMultiples(log), false) { |
| return; |
| } |
| } while ((segment = segment->next())); |
| return; |
| } |
| |
| void SkOpContour::debugMoveNearby(SkPathOpsDebug::GlitchLog* log) const { |
| SkASSERT(fCount > 0); |
| const SkOpSegment* segment = &fHead; |
| do { |
| segment->debugMoveNearby(log); |
| } while ((segment = segment->next())); |
| } |
| #endif |
| |
| #if DEBUG_COINCIDENCE_ORDER |
| void SkOpSegment::debugResetCoinT() const { |
| fDebugBaseIndex = -1; |
| fDebugBaseMin = 1; |
| fDebugBaseMax = -1; |
| fDebugLastIndex = -1; |
| fDebugLastMin = 1; |
| fDebugLastMax = -1; |
| } |
| #endif |
| |
| void SkOpSegment::debugValidate() const { |
| #if DEBUG_COINCIDENCE_ORDER |
| { |
| const SkOpSpanBase* span = &fHead; |
| do { |
| span->debugResetCoinT(); |
| } while (!span->final() && (span = span->upCast()->next())); |
| span = &fHead; |
| int index = 0; |
| do { |
| span->debugSetCoinT(index++); |
| } while (!span->final() && (span = span->upCast()->next())); |
| } |
| #endif |
| #if DEBUG_COINCIDENCE |
| if (this->globalState()->debugCheckHealth()) { |
| return; |
| } |
| #endif |
| #if DEBUG_VALIDATE |
| const SkOpSpanBase* span = &fHead; |
| double lastT = -1; |
| const SkOpSpanBase* prev = nullptr; |
| int count = 0; |
| int done = 0; |
| do { |
| if (!span->final()) { |
| ++count; |
| done += span->upCast()->done() ? 1 : 0; |
| } |
| SkASSERT(span->segment() == this); |
| SkASSERT(!prev || prev->upCast()->next() == span); |
| SkASSERT(!prev || prev == span->prev()); |
| prev = span; |
| double t = span->ptT()->fT; |
| SkASSERT(lastT < t); |
| lastT = t; |
| span->debugValidate(); |
| } while (!span->final() && (span = span->upCast()->next())); |
| SkASSERT(count == fCount); |
| SkASSERT(done == fDoneCount); |
| SkASSERT(count >= fDoneCount); |
| SkASSERT(span->final()); |
| span->debugValidate(); |
| #endif |
| } |
| |
| #if DEBUG_COIN |
| |
| // Commented-out lines keep this in sync with addOpp() |
| void SkOpSpanBase::debugAddOpp(SkPathOpsDebug::GlitchLog* log, const SkOpSpanBase* opp) const { |
| const SkOpPtT* oppPrev = this->ptT()->oppPrev(opp->ptT()); |
| if (!oppPrev) { |
| return; |
| } |
| this->debugMergeMatches(log, opp); |
| this->ptT()->debugAddOpp(opp->ptT(), oppPrev); |
| this->debugCheckForCollapsedCoincidence(log); |
| } |
| |
| // Commented-out lines keep this in sync with checkForCollapsedCoincidence() |
| void SkOpSpanBase::debugCheckForCollapsedCoincidence(SkPathOpsDebug::GlitchLog* log) const { |
| const SkOpCoincidence* coins = this->globalState()->coincidence(); |
| if (coins->isEmpty()) { |
| return; |
| } |
| // the insert above may have put both ends of a coincident run in the same span |
| // for each coincident ptT in loop; see if its opposite in is also in the loop |
| // this implementation is the motivation for marking that a ptT is referenced by a coincident span |
| const SkOpPtT* head = this->ptT(); |
| const SkOpPtT* test = head; |
| do { |
| if (!test->coincident()) { |
| continue; |
| } |
| coins->debugMarkCollapsed(log, test); |
| } while ((test = test->next()) != head); |
| } |
| #endif |
| |
| bool SkOpSpanBase::debugCoinEndLoopCheck() const { |
| int loop = 0; |
| const SkOpSpanBase* next = this; |
| SkOpSpanBase* nextCoin; |
| do { |
| nextCoin = next->fCoinEnd; |
| SkASSERT(nextCoin == this || nextCoin->fCoinEnd != nextCoin); |
| for (int check = 1; check < loop - 1; ++check) { |
| const SkOpSpanBase* checkCoin = this->fCoinEnd; |
| const SkOpSpanBase* innerCoin = checkCoin; |
| for (int inner = check + 1; inner < loop; ++inner) { |
| innerCoin = innerCoin->fCoinEnd; |
| if (checkCoin == innerCoin) { |
| SkDebugf("*** bad coincident end loop ***\n"); |
| return false; |
| } |
| } |
| } |
| ++loop; |
| } while ((next = nextCoin) && next != this); |
| return true; |
| } |
| |
| #if DEBUG_COIN |
| // Commented-out lines keep this in sync with insertCoinEnd() |
| void SkOpSpanBase::debugInsertCoinEnd(SkPathOpsDebug::GlitchLog* log, const SkOpSpanBase* coin) const { |
| if (containsCoinEnd(coin)) { |
| // SkASSERT(coin->containsCoinEnd(this)); |
| return; |
| } |
| debugValidate(); |
| // SkASSERT(this != coin); |
| log->record(SkPathOpsDebug::kMarkCoinEnd_Glitch, this, coin); |
| // coin->fCoinEnd = this->fCoinEnd; |
| // this->fCoinEnd = coinNext; |
| debugValidate(); |
| } |
| |
| // Commented-out lines keep this in sync with mergeMatches() |
| // Look to see if pt-t linked list contains same segment more than once |
| // if so, and if each pt-t is directly pointed to by spans in that segment, |
| // merge them |
| // keep the points, but remove spans so that the segment doesn't have 2 or more |
| // spans pointing to the same pt-t loop at different loop elements |
| void SkOpSpanBase::debugMergeMatches(SkPathOpsDebug::GlitchLog* log, const SkOpSpanBase* opp) const { |
| const SkOpPtT* test = &fPtT; |
| const SkOpPtT* testNext; |
| const SkOpPtT* stop = test; |
| do { |
| testNext = test->next(); |
| if (test->deleted()) { |
| continue; |
| } |
| const SkOpSpanBase* testBase = test->span(); |
| SkASSERT(testBase->ptT() == test); |
| const SkOpSegment* segment = test->segment(); |
| if (segment->done()) { |
| continue; |
| } |
| const SkOpPtT* inner = opp->ptT(); |
| const SkOpPtT* innerStop = inner; |
| do { |
| if (inner->segment() != segment) { |
| continue; |
| } |
| if (inner->deleted()) { |
| continue; |
| } |
| const SkOpSpanBase* innerBase = inner->span(); |
| SkASSERT(innerBase->ptT() == inner); |
| // when the intersection is first detected, the span base is marked if there are |
| // more than one point in the intersection. |
| // if (!innerBase->hasMultipleHint() && !testBase->hasMultipleHint()) { |
| if (!zero_or_one(inner->fT)) { |
| log->record(SkPathOpsDebug::kMergeMatches_Glitch, innerBase, test); |
| } else { |
| SkASSERT(inner->fT != test->fT); |
| if (!zero_or_one(test->fT)) { |
| log->record(SkPathOpsDebug::kMergeMatches_Glitch, testBase, inner); |
| } else { |
| log->record(SkPathOpsDebug::kMergeMatches_Glitch, segment); |
| // SkDEBUGCODE(testBase->debugSetDeleted()); |
| // test->setDeleted(); |
| // SkDEBUGCODE(innerBase->debugSetDeleted()); |
| // inner->setDeleted(); |
| } |
| } |
| #ifdef SK_DEBUG // assert if another undeleted entry points to segment |
| const SkOpPtT* debugInner = inner; |
| while ((debugInner = debugInner->next()) != innerStop) { |
| if (debugInner->segment() != segment) { |
| continue; |
| } |
| if (debugInner->deleted()) { |
| continue; |
| } |
| SkOPASSERT(0); |
| } |
| #endif |
| break; |
| // } |
| break; |
| } while ((inner = inner->next()) != innerStop); |
| } while ((test = testNext) != stop); |
| this->debugCheckForCollapsedCoincidence(log); |
| } |
| |
| #endif |
| |
| void SkOpSpanBase::debugResetCoinT() const { |
| #if DEBUG_COINCIDENCE_ORDER |
| const SkOpPtT* ptT = &fPtT; |
| do { |
| ptT->debugResetCoinT(); |
| ptT = ptT->next(); |
| } while (ptT != &fPtT); |
| #endif |
| } |
| |
| void SkOpSpanBase::debugSetCoinT(int index) const { |
| #if DEBUG_COINCIDENCE_ORDER |
| const SkOpPtT* ptT = &fPtT; |
| do { |
| if (!ptT->deleted()) { |
| ptT->debugSetCoinT(index); |
| } |
| ptT = ptT->next(); |
| } while (ptT != &fPtT); |
| #endif |
| } |
| |
| const SkOpSpan* SkOpSpanBase::debugStarter(SkOpSpanBase const** endPtr) const { |
| const SkOpSpanBase* end = *endPtr; |
| SkASSERT(this->segment() == end->segment()); |
| const SkOpSpanBase* result; |
| if (t() < end->t()) { |
| result = this; |
| } else { |
| result = end; |
| *endPtr = this; |
| } |
| return result->upCast(); |
| } |
| |
| void SkOpSpanBase::debugValidate() const { |
| #if DEBUG_COINCIDENCE |
| if (this->globalState()->debugCheckHealth()) { |
| return; |
| } |
| #endif |
| #if DEBUG_VALIDATE |
| const SkOpPtT* ptT = &fPtT; |
| SkASSERT(ptT->span() == this); |
| do { |
| // SkASSERT(SkDPoint::RoughlyEqual(fPtT.fPt, ptT->fPt)); |
| ptT->debugValidate(); |
| ptT = ptT->next(); |
| } while (ptT != &fPtT); |
| SkASSERT(this->debugCoinEndLoopCheck()); |
| if (!this->final()) { |
| SkASSERT(this->upCast()->debugCoinLoopCheck()); |
| } |
| if (fFromAngle) { |
| fFromAngle->debugValidate(); |
| } |
| if (!this->final() && this->upCast()->toAngle()) { |
| this->upCast()->toAngle()->debugValidate(); |
| } |
| #endif |
| } |
| |
| bool SkOpSpan::debugCoinLoopCheck() const { |
| int loop = 0; |
| const SkOpSpan* next = this; |
| SkOpSpan* nextCoin; |
| do { |
| nextCoin = next->fCoincident; |
| SkASSERT(nextCoin == this || nextCoin->fCoincident != nextCoin); |
| for (int check = 1; check < loop - 1; ++check) { |
| const SkOpSpan* checkCoin = this->fCoincident; |
| const SkOpSpan* innerCoin = checkCoin; |
| for (int inner = check + 1; inner < loop; ++inner) { |
| innerCoin = innerCoin->fCoincident; |
| if (checkCoin == innerCoin) { |
| SkDebugf("*** bad coincident loop ***\n"); |
| return false; |
| } |
| } |
| } |
| ++loop; |
| } while ((next = nextCoin) && next != this); |
| return true; |
| } |
| |
| #if DEBUG_COIN |
| // Commented-out lines keep this in sync with insertCoincidence() in header |
| void SkOpSpan::debugInsertCoincidence(SkPathOpsDebug::GlitchLog* log, const SkOpSpan* coin) const { |
| if (containsCoincidence(coin)) { |
| // SkASSERT(coin->containsCoincidence(this)); |
| return; |
| } |
| debugValidate(); |
| // SkASSERT(this != coin); |
| log->record(SkPathOpsDebug::kMarkCoinStart_Glitch, this, coin); |
| // coin->fCoincident = this->fCoincident; |
| // this->fCoincident = coinNext; |
| debugValidate(); |
| } |
| |
| // Commented-out lines keep this in sync with insertCoincidence() |
| void SkOpSpan::debugInsertCoincidence(SkPathOpsDebug::GlitchLog* log, const SkOpSegment* segment, bool flipped, bool ordered) const { |
| if (this->containsCoincidence(segment)) { |
| return; |
| } |
| const SkOpPtT* next = &fPtT; |
| while ((next = next->next()) != &fPtT) { |
| if (next->segment() == segment) { |
| const SkOpSpan* span; |
| const SkOpSpanBase* base = next->span(); |
| if (!ordered) { |
| const SkOpSpanBase* spanEnd = fNext->contains(segment)->span(); |
| const SkOpPtT* start = base->ptT()->starter(spanEnd->ptT()); |
| FAIL_IF(!start->span()->upCastable(), this); |
| span = const_cast<SkOpSpan*>(start->span()->upCast()); |
| } |
| else if (flipped) { |
| span = base->prev(); |
| FAIL_IF(!span, this); |
| } |
| else { |
| FAIL_IF(!base->upCastable(), this); |
| span = base->upCast(); |
| } |
| log->record(SkPathOpsDebug::kMarkCoinInsert_Glitch, span); |
| return; |
| } |
| } |
| #if DEBUG_COIN |
| log->record(SkPathOpsDebug::kMarkCoinMissing_Glitch, segment, this); |
| #endif |
| return; |
| } |
| #endif |
| |
| // called only by test code |
| int SkIntersections::debugCoincidentUsed() const { |
| if (!fIsCoincident[0]) { |
| SkASSERT(!fIsCoincident[1]); |
| return 0; |
| } |
| int count = 0; |
| SkDEBUGCODE(int count2 = 0;) |
| for (int index = 0; index < fUsed; ++index) { |
| if (fIsCoincident[0] & (1 << index)) { |
| ++count; |
| } |
| #ifdef SK_DEBUG |
| if (fIsCoincident[1] & (1 << index)) { |
| ++count2; |
| } |
| #endif |
| } |
| SkASSERT(count == count2); |
| return count; |
| } |
| |
| #include "SkOpContour.h" |
| |
| // Commented-out lines keep this in sync with addOpp() |
| void SkOpPtT::debugAddOpp(const SkOpPtT* opp, const SkOpPtT* oppPrev) const { |
| SkDEBUGCODE(const SkOpPtT* oldNext = this->fNext); |
| SkASSERT(this != opp); |
| // this->fNext = opp; |
| SkASSERT(oppPrev != oldNext); |
| // oppPrev->fNext = oldNext; |
| } |
| |
| bool SkOpPtT::debugContains(const SkOpPtT* check) const { |
| SkASSERT(this != check); |
| const SkOpPtT* ptT = this; |
| int links = 0; |
| do { |
| ptT = ptT->next(); |
| if (ptT == check) { |
| return true; |
| } |
| ++links; |
| const SkOpPtT* test = this; |
| for (int index = 0; index < links; ++index) { |
| if (ptT == test) { |
| return false; |
| } |
| test = test->next(); |
| } |
| } while (true); |
| } |
| |
| const SkOpPtT* SkOpPtT::debugContains(const SkOpSegment* check) const { |
| SkASSERT(this->segment() != check); |
| const SkOpPtT* ptT = this; |
| int links = 0; |
| do { |
| ptT = ptT->next(); |
| if (ptT->segment() == check) { |
| return ptT; |
| } |
| ++links; |
| const SkOpPtT* test = this; |
| for (int index = 0; index < links; ++index) { |
| if (ptT == test) { |
| return nullptr; |
| } |
| test = test->next(); |
| } |
| } while (true); |
| } |
| |
| const SkOpPtT* SkOpPtT::debugEnder(const SkOpPtT* end) const { |
| return fT < end->fT ? end : this; |
| } |
| |
| int SkOpPtT::debugLoopLimit(bool report) const { |
| int loop = 0; |
| const SkOpPtT* next = this; |
| do { |
| for (int check = 1; check < loop - 1; ++check) { |
| const SkOpPtT* checkPtT = this->fNext; |
| const SkOpPtT* innerPtT = checkPtT; |
| for (int inner = check + 1; inner < loop; ++inner) { |
| innerPtT = innerPtT->fNext; |
| if (checkPtT == innerPtT) { |
| if (report) { |
| SkDebugf("*** bad ptT loop ***\n"); |
| } |
| return loop; |
| } |
| } |
| } |
| // there's nothing wrong with extremely large loop counts -- but this may appear to hang |
| // by taking a very long time to figure out that no loop entry is a duplicate |
| // -- and it's likely that a large loop count is indicative of a bug somewhere |
| if (++loop > 1000) { |
| SkDebugf("*** loop count exceeds 1000 ***\n"); |
| return 1000; |
| } |
| } while ((next = next->fNext) && next != this); |
| return 0; |
| } |
| |
| const SkOpPtT* SkOpPtT::debugOppPrev(const SkOpPtT* opp) const { |
| return this->oppPrev(const_cast<SkOpPtT*>(opp)); |
| } |
| |
| void SkOpPtT::debugResetCoinT() const { |
| #if DEBUG_COINCIDENCE_ORDER |
| this->segment()->debugResetCoinT(); |
| #endif |
| } |
| |
| void SkOpPtT::debugSetCoinT(int index) const { |
| #if DEBUG_COINCIDENCE_ORDER |
| this->segment()->debugSetCoinT(index, fT); |
| #endif |
| } |
| |
| void SkOpPtT::debugValidate() const { |
| #if DEBUG_COINCIDENCE |
| if (this->globalState()->debugCheckHealth()) { |
| return; |
| } |
| #endif |
| #if DEBUG_VALIDATE |
| SkOpPhase phase = contour()->globalState()->phase(); |
| if (phase == SkOpPhase::kIntersecting || phase == SkOpPhase::kFixWinding) { |
| return; |
| } |
| SkASSERT(fNext); |
| SkASSERT(fNext != this); |
| SkASSERT(fNext->fNext); |
| SkASSERT(debugLoopLimit(false) == 0); |
| #endif |
| } |
| |
| static void output_scalar(SkScalar num) { |
| if (num == (int) num) { |
| SkDebugf("%d", (int) num); |
| } else { |
| SkString str; |
| str.printf("%1.9g", num); |
| int width = (int) str.size(); |
| const char* cStr = str.c_str(); |
| while (cStr[width - 1] == '0') { |
| --width; |
| } |
| str.resize(width); |
| SkDebugf("%sf", str.c_str()); |
| } |
| } |
| |
| static void output_points(const SkPoint* pts, int count) { |
| for (int index = 0; index < count; ++index) { |
| output_scalar(pts[index].fX); |
| SkDebugf(", "); |
| output_scalar(pts[index].fY); |
| if (index + 1 < count) { |
| SkDebugf(", "); |
| } |
| } |
| } |
| |
| static void showPathContours(SkPath::RawIter& iter, const char* pathName) { |
| uint8_t verb; |
| SkPoint pts[4]; |
| while ((verb = iter.next(pts)) != SkPath::kDone_Verb) { |
| switch (verb) { |
| case SkPath::kMove_Verb: |
| SkDebugf(" %s.moveTo(", pathName); |
| output_points(&pts[0], 1); |
| SkDebugf(");\n"); |
| continue; |
| case SkPath::kLine_Verb: |
| SkDebugf(" %s.lineTo(", pathName); |
| output_points(&pts[1], 1); |
| SkDebugf(");\n"); |
| break; |
| case SkPath::kQuad_Verb: |
| SkDebugf(" %s.quadTo(", pathName); |
| output_points(&pts[1], 2); |
| SkDebugf(");\n"); |
| break; |
| case SkPath::kConic_Verb: |
| SkDebugf(" %s.conicTo(", pathName); |
| output_points(&pts[1], 2); |
| SkDebugf(", %1.9gf);\n", iter.conicWeight()); |
| break; |
| case SkPath::kCubic_Verb: |
| SkDebugf(" %s.cubicTo(", pathName); |
| output_points(&pts[1], 3); |
| SkDebugf(");\n"); |
| break; |
| case SkPath::kClose_Verb: |
| SkDebugf(" %s.close();\n", pathName); |
| break; |
| default: |
| SkDEBUGFAIL("bad verb"); |
| return; |
| } |
| } |
| } |
| |
| static const char* gFillTypeStr[] = { |
| "kWinding_FillType", |
| "kEvenOdd_FillType", |
| "kInverseWinding_FillType", |
| "kInverseEvenOdd_FillType" |
| }; |
| |
| void SkPathOpsDebug::ShowOnePath(const SkPath& path, const char* name, bool includeDeclaration) { |
| SkPath::RawIter iter(path); |
| #define SUPPORT_RECT_CONTOUR_DETECTION 0 |
| #if SUPPORT_RECT_CONTOUR_DETECTION |
| int rectCount = path.isRectContours() ? path.rectContours(nullptr, nullptr) : 0; |
| if (rectCount > 0) { |
| SkTDArray<SkRect> rects; |
| SkTDArray<SkPath::Direction> directions; |
| rects.setCount(rectCount); |
| directions.setCount(rectCount); |
| path.rectContours(rects.begin(), directions.begin()); |
| for (int contour = 0; contour < rectCount; ++contour) { |
| const SkRect& rect = rects[contour]; |
| SkDebugf("path.addRect(%1.9g, %1.9g, %1.9g, %1.9g, %s);\n", rect.fLeft, rect.fTop, |
| rect.fRight, rect.fBottom, directions[contour] == SkPath::kCCW_Direction |
| ? "SkPath::kCCW_Direction" : "SkPath::kCW_Direction"); |
| } |
| return; |
| } |
| #endif |
| SkPath::FillType fillType = path.getFillType(); |
| SkASSERT(fillType >= SkPath::kWinding_FillType && fillType <= SkPath::kInverseEvenOdd_FillType); |
| if (includeDeclaration) { |
| SkDebugf(" SkPath %s;\n", name); |
| } |
| SkDebugf(" %s.setFillType(SkPath::%s);\n", name, gFillTypeStr[fillType]); |
| iter.setPath(path); |
| showPathContours(iter, name); |
| } |
| |
| #if DEBUG_DUMP_VERIFY |
| #include "SkData.h" |
| #include "SkStream.h" |
| |
| static void dump_path(FILE* file, const SkPath& path, bool force, bool dumpAsHex) { |
| SkDynamicMemoryWStream wStream; |
| path.dump(&wStream, force, dumpAsHex); |
| sk_sp<SkData> data(wStream.detachAsData()); |
| fprintf(file, "%.*s\n", (int) data->size(), (char*) data->data()); |
| } |
| |
| static int dumpID = 0; |
| |
| void SkPathOpsDebug::DumpOp(const SkPath& one, const SkPath& two, SkPathOp op, |
| const char* testName) { |
| FILE* file = sk_fopen("op_dump.txt", kWrite_SkFILE_Flag); |
| DumpOp(file, one, two, op, testName); |
| } |
| |
| void SkPathOpsDebug::DumpOp(FILE* file, const SkPath& one, const SkPath& two, SkPathOp op, |
| const char* testName) { |
| const char* name = testName ? testName : "op"; |
| fprintf(file, |
| "\nstatic void %s_%d(skiatest::Reporter* reporter, const char* filename) {\n", |
| name, ++dumpID); |
| fprintf(file, " SkPath path;\n"); |
| fprintf(file, " path.setFillType((SkPath::FillType) %d);\n", one.getFillType()); |
| dump_path(file, one, false, true); |
| fprintf(file, " SkPath path1(path);\n"); |
| fprintf(file, " path.reset();\n"); |
| fprintf(file, " path.setFillType((SkPath::FillType) %d);\n", two.getFillType()); |
| dump_path(file, two, false, true); |
| fprintf(file, " SkPath path2(path);\n"); |
| fprintf(file, " testPathOp(reporter, path1, path2, (SkPathOp) %d, filename);\n", op); |
| fprintf(file, "}\n\n"); |
| fclose(file); |
| } |
| |
| void SkPathOpsDebug::DumpSimplify(const SkPath& path, const char* testName) { |
| FILE* file = sk_fopen("simplify_dump.txt", kWrite_SkFILE_Flag); |
| DumpSimplify(file, path, testName); |
| } |
| |
| void SkPathOpsDebug::DumpSimplify(FILE* file, const SkPath& path, const char* testName) { |
| const char* name = testName ? testName : "simplify"; |
| fprintf(file, |
| "\nstatic void %s_%d(skiatest::Reporter* reporter, const char* filename) {\n", |
| name, ++dumpID); |
| fprintf(file, " SkPath path;\n"); |
| fprintf(file, " path.setFillType((SkPath::FillType) %d);\n", path.getFillType()); |
| dump_path(file, path, false, true); |
| fprintf(file, " testSimplify(reporter, path, filename);\n"); |
| fprintf(file, "}\n\n"); |
| fclose(file); |
| } |
| |
| #include "SkBitmap.h" |
| #include "SkCanvas.h" |
| #include "SkPaint.h" |
| |
| const int bitWidth = 64; |
| const int bitHeight = 64; |
| |
| static void debug_scale_matrix(const SkPath& one, const SkPath* two, SkMatrix& scale) { |
| SkRect larger = one.getBounds(); |
| if (two) { |
| larger.join(two->getBounds()); |
| } |
| SkScalar largerWidth = larger.width(); |
| if (largerWidth < 4) { |
| largerWidth = 4; |
| } |
| SkScalar largerHeight = larger.height(); |
| if (largerHeight < 4) { |
| largerHeight = 4; |
| } |
| SkScalar hScale = (bitWidth - 2) / largerWidth; |
| SkScalar vScale = (bitHeight - 2) / largerHeight; |
| scale.reset(); |
| scale.preScale(hScale, vScale); |
| larger.fLeft *= hScale; |
| larger.fRight *= hScale; |
| larger.fTop *= vScale; |
| larger.fBottom *= vScale; |
| SkScalar dx = -16000 > larger.fLeft ? -16000 - larger.fLeft |
| : 16000 < larger.fRight ? 16000 - larger.fRight : 0; |
| SkScalar dy = -16000 > larger.fTop ? -16000 - larger.fTop |
| : 16000 < larger.fBottom ? 16000 - larger.fBottom : 0; |
| scale.preTranslate(dx, dy); |
| } |
| |
| static int debug_paths_draw_the_same(const SkPath& one, const SkPath& two, SkBitmap& bits) { |
| if (bits.width() == 0) { |
| bits.allocN32Pixels(bitWidth * 2, bitHeight); |
| } |
| SkCanvas canvas(bits); |
| canvas.drawColor(SK_ColorWHITE); |
| SkPaint paint; |
| canvas.save(); |
| const SkRect& bounds1 = one.getBounds(); |
| canvas.translate(-bounds1.fLeft + 1, -bounds1.fTop + 1); |
| canvas.drawPath(one, paint); |
| canvas.restore(); |
| canvas.save(); |
| canvas.translate(-bounds1.fLeft + 1 + bitWidth, -bounds1.fTop + 1); |
| canvas.drawPath(two, paint); |
| canvas.restore(); |
| int errors = 0; |
| for (int y = 0; y < bitHeight - 1; ++y) { |
| uint32_t* addr1 = bits.getAddr32(0, y); |
| uint32_t* addr2 = bits.getAddr32(0, y + 1); |
| uint32_t* addr3 = bits.getAddr32(bitWidth, y); |
| uint32_t* addr4 = bits.getAddr32(bitWidth, y + 1); |
| for (int x = 0; x < bitWidth - 1; ++x) { |
| // count 2x2 blocks |
| bool err = addr1[x] != addr3[x]; |
| if (err) { |
| errors += addr1[x + 1] != addr3[x + 1] |
| && addr2[x] != addr4[x] && addr2[x + 1] != addr4[x + 1]; |
| } |
| } |
| } |
| return errors; |
| } |
| |
| void SkPathOpsDebug::ReportOpFail(const SkPath& one, const SkPath& two, SkPathOp op) { |
| SkDebugf("// Op did not expect failure\n"); |
| DumpOp(stderr, one, two, op, "opTest"); |
| fflush(stderr); |
| } |
| |
| void SkPathOpsDebug::VerifyOp(const SkPath& one, const SkPath& two, SkPathOp op, |
| const SkPath& result) { |
| SkPath pathOut, scaledPathOut; |
| SkRegion rgnA, rgnB, openClip, rgnOut; |
| openClip.setRect(-16000, -16000, 16000, 16000); |
| rgnA.setPath(one, openClip); |
| rgnB.setPath(two, openClip); |
| rgnOut.op(rgnA, rgnB, (SkRegion::Op) op); |
| rgnOut.getBoundaryPath(&pathOut); |
| SkMatrix scale; |
| debug_scale_matrix(one, &two, scale); |
| SkRegion scaledRgnA, scaledRgnB, scaledRgnOut; |
| SkPath scaledA, scaledB; |
| scaledA.addPath(one, scale); |
| scaledA.setFillType(one.getFillType()); |
| scaledB.addPath(two, scale); |
| scaledB.setFillType(two.getFillType()); |
| scaledRgnA.setPath(scaledA, openClip); |
| scaledRgnB.setPath(scaledB, openClip); |
| scaledRgnOut.op(scaledRgnA, scaledRgnB, (SkRegion::Op) op); |
| scaledRgnOut.getBoundaryPath(&scaledPathOut); |
| SkBitmap bitmap; |
| SkPath scaledOut; |
| scaledOut.addPath(result, scale); |
| scaledOut.setFillType(result.getFillType()); |
| int errors = debug_paths_draw_the_same(scaledPathOut, scaledOut, bitmap); |
| const int MAX_ERRORS = 9; |
| if (errors > MAX_ERRORS) { |
| fprintf(stderr, "// Op did not expect errors=%d\n", errors); |
| DumpOp(stderr, one, two, op, "opTest"); |
| fflush(stderr); |
| } |
| } |
| |
| void SkPathOpsDebug::ReportSimplifyFail(const SkPath& path) { |
| SkDebugf("// Simplify did not expect failure\n"); |
| DumpSimplify(stderr, path, "simplifyTest"); |
| fflush(stderr); |
| } |
| |
| void SkPathOpsDebug::VerifySimplify(const SkPath& path, const SkPath& result) { |
| SkPath pathOut, scaledPathOut; |
| SkRegion rgnA, openClip, rgnOut; |
| openClip.setRect(-16000, -16000, 16000, 16000); |
| rgnA.setPath(path, openClip); |
| rgnOut.getBoundaryPath(&pathOut); |
| SkMatrix scale; |
| debug_scale_matrix(path, nullptr, scale); |
| SkRegion scaledRgnA; |
| SkPath scaledA; |
| scaledA.addPath(path, scale); |
| scaledA.setFillType(path.getFillType()); |
| scaledRgnA.setPath(scaledA, openClip); |
| scaledRgnA.getBoundaryPath(&scaledPathOut); |
| SkBitmap bitmap; |
| SkPath scaledOut; |
| scaledOut.addPath(result, scale); |
| scaledOut.setFillType(result.getFillType()); |
| int errors = debug_paths_draw_the_same(scaledPathOut, scaledOut, bitmap); |
| const int MAX_ERRORS = 9; |
| if (errors > MAX_ERRORS) { |
| fprintf(stderr, "// Simplify did not expect errors=%d\n", errors); |
| DumpSimplify(stderr, path, "simplifyTest"); |
| fflush(stderr); |
| } |
| } |
| |
| #endif |
| |
| // global path dumps for msvs Visual Studio 17 to use from Immediate Window |
| void Dump(const SkPath& path) { |
| path.dump(); |
| } |
| |
| void DumpHex(const SkPath& path) { |
| path.dumpHex(); |
| } |