blob: 6527064b93e24add505127e9d7f2f6ff8ee1f435 [file] [log] [blame]
/*
* Copyright 2011 Google Inc.
*
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#ifndef GrGpu_DEFINED
#define GrGpu_DEFINED
#include "GrCaps.h"
#include "GrGpuCommandBuffer.h"
#include "GrProgramDesc.h"
#include "GrSwizzle.h"
#include "GrAllocator.h"
#include "GrTextureProducer.h"
#include "GrTypes.h"
#include "GrXferProcessor.h"
#include "SkPath.h"
#include "SkTArray.h"
#include <map>
class GrBackendRenderTarget;
class GrBackendSemaphore;
class GrBuffer;
class GrContext;
struct GrContextOptions;
class GrGLContext;
class GrMesh;
class GrPath;
class GrPathRange;
class GrPathRenderer;
class GrPathRendererChain;
class GrPathRendering;
class GrPipeline;
class GrPrimitiveProcessor;
class GrRenderTarget;
class GrSemaphore;
class GrStencilAttachment;
class GrStencilSettings;
class GrSurface;
class GrTexture;
class SkJSONWriter;
class GrGpu : public SkRefCnt {
public:
/**
* Create an instance of GrGpu that matches the specified backend. If the requested backend is
* not supported (at compile-time or run-time) this returns nullptr. The context will not be
* fully constructed and should not be used by GrGpu until after this function returns.
*/
static sk_sp<GrGpu> Make(GrBackend, GrBackendContext, const GrContextOptions&, GrContext*);
////////////////////////////////////////////////////////////////////////////
GrGpu(GrContext* context);
~GrGpu() override;
GrContext* getContext() { return fContext; }
const GrContext* getContext() const { return fContext; }
/**
* Gets the capabilities of the draw target.
*/
const GrCaps* caps() const { return fCaps.get(); }
sk_sp<const GrCaps> refCaps() const { return fCaps; }
GrPathRendering* pathRendering() { return fPathRendering.get(); }
enum class DisconnectType {
// No cleanup should be attempted, immediately cease making backend API calls
kAbandon,
// Free allocated resources (not known by GrResourceCache) before returning and
// ensure no backend backend 3D API calls will be made after disconnect() returns.
kCleanup,
};
// Called by GrContext when the underlying backend context is already or will be destroyed
// before GrContext.
virtual void disconnect(DisconnectType);
/**
* The GrGpu object normally assumes that no outsider is setting state
* within the underlying 3D API's context/device/whatever. This call informs
* the GrGpu that the state was modified and it shouldn't make assumptions
* about the state.
*/
void markContextDirty(uint32_t state = kAll_GrBackendState) { fResetBits |= state; }
/**
* Creates a texture object. If kRenderTarget_GrSurfaceFlag the texture can
* be used as a render target by calling GrTexture::asRenderTarget(). Not all
* pixel configs can be used as render targets. Support for configs as textures
* or render targets can be checked using GrCaps.
*
* @param desc describes the texture to be created.
* @param budgeted does this texture count against the resource cache budget?
* @param texels array of mipmap levels containing texel data to load.
* Each level begins with full-size palette data for paletted textures.
* It contains width*height texels. If there is only one
* element and it contains nullptr fPixels, texture data is
* uninitialized.
* @param mipLevelCount the number of levels in 'texels'
* @return The texture object if successful, otherwise nullptr.
*/
sk_sp<GrTexture> createTexture(const GrSurfaceDesc&, SkBudgeted,
const GrMipLevel texels[], int mipLevelCount);
/**
* Simplified createTexture() interface for when there is no initial texel data to upload.
*/
sk_sp<GrTexture> createTexture(const GrSurfaceDesc& desc, SkBudgeted);
/**
* Implements GrResourceProvider::wrapBackendTexture
*/
sk_sp<GrTexture> wrapBackendTexture(const GrBackendTexture&, GrWrapOwnership);
/**
* Implements GrResourceProvider::wrapRenderableBackendTexture
*/
sk_sp<GrTexture> wrapRenderableBackendTexture(const GrBackendTexture&,
int sampleCnt, GrWrapOwnership);
/**
* Implements GrResourceProvider::wrapBackendRenderTarget
*/
sk_sp<GrRenderTarget> wrapBackendRenderTarget(const GrBackendRenderTarget&);
/**
* Implements GrResourceProvider::wrapBackendTextureAsRenderTarget
*/
sk_sp<GrRenderTarget> wrapBackendTextureAsRenderTarget(const GrBackendTexture&,
int sampleCnt);
/**
* Creates a buffer in GPU memory. For a client-side buffer use GrBuffer::CreateCPUBacked.
*
* @param size size of buffer to create.
* @param intendedType hint to the graphics subsystem about what the buffer will be used for.
* @param accessPattern hint to the graphics subsystem about how the data will be accessed.
* @param data optional data with which to initialize the buffer.
*
* @return the buffer if successful, otherwise nullptr.
*/
GrBuffer* createBuffer(size_t size, GrBufferType intendedType, GrAccessPattern accessPattern,
const void* data = nullptr);
/**
* Resolves MSAA.
*/
void resolveRenderTarget(GrRenderTarget*, GrSurfaceOrigin);
/** Info struct returned by getReadPixelsInfo about performing intermediate draws before
reading pixels for performance or correctness. */
struct ReadPixelTempDrawInfo {
/** If the GrGpu is requesting that the caller do a draw to an intermediate surface then
this is descriptor for the temp surface. The draw should always be a rect with
dst 0,0,w,h. */
GrSurfaceDesc fTempSurfaceDesc;
/** Indicates whether there is a performance advantage to using an exact match texture
(in terms of width and height) for the intermediate texture instead of approximate. */
SkBackingFit fTempSurfaceFit;
/** Swizzle to apply during the draw. This is used to compensate for either feature or
performance limitations in the underlying 3D API. */
GrSwizzle fSwizzle;
/** The config that should be used to read from the temp surface after the draw. This may be
different than the original read config in order to compensate for swizzling. The
read data will effectively be in the original read config. */
GrPixelConfig fReadConfig;
};
/** Describes why an intermediate draw must/should be performed before readPixels. */
enum DrawPreference {
/** On input means that the caller would proceed without draw if the GrGpu doesn't request
one.
On output means that the GrGpu is not requesting a draw. */
kNoDraw_DrawPreference,
/** Means that the client would prefer a draw for performance of the readback but
can satisfy a straight readPixels call on the inputs without an intermediate draw.
getReadPixelsInfo will never set the draw preference to this value but may leave
it set. */
kCallerPrefersDraw_DrawPreference,
/** On output means that GrGpu would prefer a draw for performance of the readback but
can satisfy a straight readPixels call on the inputs without an intermediate draw. The
caller of getReadPixelsInfo should never specify this on intput. */
kGpuPrefersDraw_DrawPreference,
/** On input means that the caller requires a draw to do a transformation and there is no
CPU fallback.
On output means that GrGpu can only satisfy the readPixels request if the intermediate
draw is performed.
*/
kRequireDraw_DrawPreference
};
/**
* Used to negotiate whether and how an intermediate draw should or must be performed before
* a readPixels call. If this returns false then GrGpu could not deduce an intermediate draw
* that would allow a successful readPixels call. The passed width, height, and rowBytes,
* must be non-zero and already reflect clipping to the src bounds.
*/
bool getReadPixelsInfo(GrSurface* srcSurface, GrSurfaceOrigin srcOrigin,
int readWidth, int readHeight, size_t rowBytes,
GrPixelConfig readConfig, DrawPreference*, ReadPixelTempDrawInfo*);
/** Info struct returned by getWritePixelsInfo about performing an intermediate draw in order
to write pixels to a GrSurface for either performance or correctness reasons. */
struct WritePixelTempDrawInfo {
/** If the GrGpu is requesting that the caller upload to an intermediate surface and draw
that to the dst then this is the descriptor for the intermediate surface. The caller
should upload the pixels such that the upper left pixel of the upload rect is at 0,0 in
the intermediate surface.*/
GrSurfaceDesc fTempSurfaceDesc;
/** Swizzle to apply during the draw. This is used to compensate for either feature or
performance limitations in the underlying 3D API. */
GrSwizzle fSwizzle;
/** The config that should be specified when uploading the *original* data to the temp
surface before the draw. This may be different than the original src data config in
order to compensate for swizzling that will occur when drawing. */
GrPixelConfig fWriteConfig;
};
/**
* Used to negotiate whether and how an intermediate surface should be used to write pixels to
* a GrSurface. If this returns false then GrGpu could not deduce an intermediate draw
* that would allow a successful transfer of the src pixels to the dst. The passed width,
* height, and rowBytes, must be non-zero and already reflect clipping to the dst bounds.
*/
bool getWritePixelsInfo(GrSurface* dstSurface, GrSurfaceOrigin dstOrigin, int width, int height,
GrPixelConfig srcConfig, DrawPreference*, WritePixelTempDrawInfo*);
/**
* Reads a rectangle of pixels from a render target.
*
* @param surface The surface to read from
* @param left left edge of the rectangle to read (inclusive)
* @param top top edge of the rectangle to read (inclusive)
* @param width width of rectangle to read in pixels.
* @param height height of rectangle to read in pixels.
* @param config the pixel config of the destination buffer
* @param buffer memory to read the rectangle into.
* @param rowBytes the number of bytes between consecutive rows. Zero
* means rows are tightly packed.
* @param invertY buffer should be populated bottom-to-top as opposed
* to top-to-bottom (skia's usual order)
*
* @return true if the read succeeded, false if not. The read can fail
* because of a unsupported pixel config or because no render
* target is currently set.
*/
bool readPixels(GrSurface* surface, GrSurfaceOrigin,
int left, int top, int width, int height,
GrPixelConfig config, void* buffer, size_t rowBytes);
/**
* Updates the pixels in a rectangle of a surface.
*
* @param surface The surface to write to.
* @param left left edge of the rectangle to write (inclusive)
* @param top top edge of the rectangle to write (inclusive)
* @param width width of rectangle to write in pixels.
* @param height height of rectangle to write in pixels.
* @param config the pixel config of the source buffer
* @param texels array of mipmap levels containing texture data
* @param mipLevelCount number of levels in 'texels'
*/
bool writePixels(GrSurface* surface, GrSurfaceOrigin origin,
int left, int top, int width, int height,
GrPixelConfig config,
const GrMipLevel texels[], int mipLevelCount);
/**
* This function is a shim which creates a SkTArray<GrMipLevel> of size 1.
* It then calls writePixels with that SkTArray.
*
* @param buffer memory to read pixels from.
* @param rowBytes number of bytes between consecutive rows. Zero
* means rows are tightly packed.
*/
bool writePixels(GrSurface* surface, GrSurfaceOrigin origin,
int left, int top, int width, int height,
GrPixelConfig config, const void* buffer,
size_t rowBytes);
/**
* Updates the pixels in a rectangle of a texture using a buffer
*
* There are a couple of assumptions here. First, we only update the top miplevel.
* And second, that any y flip needed has already been done in the buffer.
*
* @param texture The texture to write to.
* @param left left edge of the rectangle to write (inclusive)
* @param top top edge of the rectangle to write (inclusive)
* @param width width of rectangle to write in pixels.
* @param height height of rectangle to write in pixels.
* @param config the pixel config of the source buffer
* @param transferBuffer GrBuffer to read pixels from (type must be "kXferCpuToGpu")
* @param offset offset from the start of the buffer
* @param rowBytes number of bytes between consecutive rows in the buffer. Zero
* means rows are tightly packed.
*/
bool transferPixels(GrTexture* texture,
int left, int top, int width, int height,
GrPixelConfig config, GrBuffer* transferBuffer,
size_t offset, size_t rowBytes);
// After the client interacts directly with the 3D context state the GrGpu
// must resync its internal state and assumptions about 3D context state.
// Each time this occurs the GrGpu bumps a timestamp.
// state of the 3D context
// At 10 resets / frame and 60fps a 64bit timestamp will overflow in about
// a billion years.
typedef uint64_t ResetTimestamp;
// This timestamp is always older than the current timestamp
static const ResetTimestamp kExpiredTimestamp = 0;
// Returns a timestamp based on the number of times the context was reset.
// This timestamp can be used to lazily detect when cached 3D context state
// is dirty.
ResetTimestamp getResetTimestamp() const { return fResetTimestamp; }
// Called to perform a surface to surface copy. Fallbacks to issuing a draw from the src to dst
// take place at the GrOpList level and this function implement faster copy paths. The rect
// and point are pre-clipped. The src rect and implied dst rect are guaranteed to be within the
// src/dst bounds and non-empty.
bool copySurface(GrSurface* dst, GrSurfaceOrigin dstOrigin,
GrSurface* src, GrSurfaceOrigin srcOrigin,
const SkIRect& srcRect,
const SkIPoint& dstPoint);
struct MultisampleSpecs {
MultisampleSpecs(uint8_t uniqueID, int effectiveSampleCnt, const SkPoint* locations)
: fUniqueID(uniqueID),
fEffectiveSampleCnt(effectiveSampleCnt),
fSampleLocations(locations) {}
// Nonzero ID that uniquely identifies these multisample specs.
uint8_t fUniqueID;
// The actual number of samples the GPU will run. NOTE: this value can be greater than the
// the render target's sample count.
int fEffectiveSampleCnt;
// If sample locations are supported, points to the subpixel locations at which the GPU will
// sample. Pixel center is at (.5, .5), and (0, 0) indicates the top left corner.
const SkPoint* fSampleLocations;
};
// Finds a render target's multisample specs. The pipeline is only needed in case we need to
// flush the draw state prior to querying multisample info. The pipeline is not expected to
// affect the multisample information itself.
const MultisampleSpecs& queryMultisampleSpecs(const GrPipeline&);
// Finds the multisample specs with a given unique id.
const MultisampleSpecs& getMultisampleSpecs(uint8_t uniqueID) {
SkASSERT(uniqueID > 0 && uniqueID < fMultisampleSpecs.count());
return fMultisampleSpecs[uniqueID];
}
// Creates a GrGpuRTCommandBuffer which GrOpLists send draw commands to instead of directly
// to the Gpu object.
virtual GrGpuRTCommandBuffer* createCommandBuffer(
GrRenderTarget*, GrSurfaceOrigin,
const GrGpuRTCommandBuffer::LoadAndStoreInfo&,
const GrGpuRTCommandBuffer::StencilLoadAndStoreInfo&) = 0;
// Creates a GrGpuTextureCommandBuffer which GrOpLists send texture commands to instead of
// directly to the Gpu object.
virtual GrGpuTextureCommandBuffer* createCommandBuffer(GrTexture*, GrSurfaceOrigin) = 0;
// Called by GrDrawingManager when flushing.
// Provides a hook for post-flush actions (e.g. Vulkan command buffer submits). This will also
// insert any numSemaphore semaphores on the gpu and set the backendSemaphores to match the
// inserted semaphores.
GrSemaphoresSubmitted finishFlush(int numSemaphores, GrBackendSemaphore backendSemaphores[]);
virtual GrFence SK_WARN_UNUSED_RESULT insertFence() = 0;
virtual bool waitFence(GrFence, uint64_t timeout = 1000) = 0;
virtual void deleteFence(GrFence) const = 0;
virtual sk_sp<GrSemaphore> SK_WARN_UNUSED_RESULT makeSemaphore(bool isOwned = true) = 0;
virtual sk_sp<GrSemaphore> wrapBackendSemaphore(const GrBackendSemaphore& semaphore,
GrResourceProvider::SemaphoreWrapType wrapType,
GrWrapOwnership ownership) = 0;
virtual void insertSemaphore(sk_sp<GrSemaphore> semaphore, bool flush = false) = 0;
virtual void waitSemaphore(sk_sp<GrSemaphore> semaphore) = 0;
/**
* Put this texture in a safe and known state for use across multiple GrContexts. Depending on
* the backend, this may return a GrSemaphore. If so, other contexts should wait on that
* semaphore before using this texture.
*/
virtual sk_sp<GrSemaphore> prepareTextureForCrossContextUsage(GrTexture*) = 0;
///////////////////////////////////////////////////////////////////////////
// Debugging and Stats
class Stats {
public:
#if GR_GPU_STATS
Stats() { this->reset(); }
void reset() {
fRenderTargetBinds = 0;
fShaderCompilations = 0;
fTextureCreates = 0;
fTextureUploads = 0;
fTransfersToTexture = 0;
fStencilAttachmentCreates = 0;
fNumDraws = 0;
fNumFailedDraws = 0;
}
int renderTargetBinds() const { return fRenderTargetBinds; }
void incRenderTargetBinds() { fRenderTargetBinds++; }
int shaderCompilations() const { return fShaderCompilations; }
void incShaderCompilations() { fShaderCompilations++; }
int textureCreates() const { return fTextureCreates; }
void incTextureCreates() { fTextureCreates++; }
int textureUploads() const { return fTextureUploads; }
void incTextureUploads() { fTextureUploads++; }
int transfersToTexture() const { return fTransfersToTexture; }
void incTransfersToTexture() { fTransfersToTexture++; }
void incStencilAttachmentCreates() { fStencilAttachmentCreates++; }
void incNumDraws() { fNumDraws++; }
void incNumFailedDraws() { ++fNumFailedDraws; }
void dump(SkString*);
void dumpKeyValuePairs(SkTArray<SkString>* keys, SkTArray<double>* values);
int numDraws() const { return fNumDraws; }
int numFailedDraws() const { return fNumFailedDraws; }
private:
int fRenderTargetBinds;
int fShaderCompilations;
int fTextureCreates;
int fTextureUploads;
int fTransfersToTexture;
int fStencilAttachmentCreates;
int fNumDraws;
int fNumFailedDraws;
#else
void dump(SkString*) {}
void dumpKeyValuePairs(SkTArray<SkString>*, SkTArray<double>*) {}
void incRenderTargetBinds() {}
void incShaderCompilations() {}
void incTextureCreates() {}
void incTextureUploads() {}
void incTransfersToTexture() {}
void incStencilAttachmentCreates() {}
void incNumDraws() {}
void incNumFailedDraws() {}
#endif
};
Stats* stats() { return &fStats; }
void dumpJSON(SkJSONWriter*) const;
/** Creates a texture directly in the backend API without wrapping it in a GrTexture. This is
only to be used for testing (particularly for testing the methods that import an externally
created texture into Skia. Must be matched with a call to deleteTestingOnlyTexture(). */
GrBackendTexture createTestingOnlyBackendTexture(void* pixels, int w, int h, SkColorType,
bool isRenderTarget, GrMipMapped);
/** Older version based on GrPixelConfig. Currently the preferred one above devolves to this. */
virtual GrBackendTexture createTestingOnlyBackendTexture(
void* pixels, int w, int h,
GrPixelConfig config,
bool isRenderTarget,
GrMipMapped mipMapped) = 0;
/** Check a handle represents an actual texture in the backend API that has not been freed. */
virtual bool isTestingOnlyBackendTexture(const GrBackendTexture&) const = 0;
/** If ownership of the backend texture has been transferred pass true for abandonTexture. This
will do any necessary cleanup of the handle without freeing the texture in the backend
API. */
virtual void deleteTestingOnlyBackendTexture(GrBackendTexture*,
bool abandonTexture = false) = 0;
// width and height may be larger than rt (if underlying API allows it).
// Returns nullptr if compatible sb could not be created, otherwise the caller owns the ref on
// the GrStencilAttachment.
virtual GrStencilAttachment* createStencilAttachmentForRenderTarget(const GrRenderTarget*,
int width,
int height) = 0;
// clears target's entire stencil buffer to 0
virtual void clearStencil(GrRenderTarget* target, int clearValue) = 0;
// Determines whether a texture will need to be rescaled in order to be used with the
// GrSamplerState. This variation is called when the caller will create a new texture using the
// resource provider from a non-texture src (cpu-backed image, ...).
bool isACopyNeededForTextureParams(int width, int height, const GrSamplerState&,
GrTextureProducer::CopyParams*,
SkScalar scaleAdjust[2]) const;
// Like the above but this variation should be called when the caller is not creating the
// original texture but rather was handed the original texture. It adds additional checks
// relevant to original textures that were created external to Skia via
// GrResourceProvider::wrap methods.
bool isACopyNeededForTextureParams(GrTextureProxy* proxy, const GrSamplerState& params,
GrTextureProducer::CopyParams* copyParams,
SkScalar scaleAdjust[2]) const {
if (this->isACopyNeededForTextureParams(proxy->width(), proxy->height(), params,
copyParams, scaleAdjust)) {
return true;
}
return this->onIsACopyNeededForTextureParams(proxy, params, copyParams, scaleAdjust);
}
// This is only to be used in GL-specific tests.
virtual const GrGLContext* glContextForTesting() const { return nullptr; }
// This is only to be used by testing code
virtual void resetShaderCacheForTesting() const {}
void handleDirtyContext() {
if (fResetBits) {
this->resetContext();
}
}
protected:
static void ElevateDrawPreference(GrGpu::DrawPreference* preference,
GrGpu::DrawPreference elevation) {
GR_STATIC_ASSERT(GrGpu::kCallerPrefersDraw_DrawPreference > GrGpu::kNoDraw_DrawPreference);
GR_STATIC_ASSERT(GrGpu::kGpuPrefersDraw_DrawPreference >
GrGpu::kCallerPrefersDraw_DrawPreference);
GR_STATIC_ASSERT(GrGpu::kRequireDraw_DrawPreference >
GrGpu::kGpuPrefersDraw_DrawPreference);
*preference = SkTMax(*preference, elevation);
}
// Handles cases where a surface will be updated without a call to flushRenderTarget
void didWriteToSurface(GrSurface* surface, const SkIRect* bounds, uint32_t mipLevels = 1) const;
Stats fStats;
std::unique_ptr<GrPathRendering> fPathRendering;
// Subclass must initialize this in its constructor.
sk_sp<const GrCaps> fCaps;
typedef SkTArray<SkPoint, true> SamplePattern;
private:
// called when the 3D context state is unknown. Subclass should emit any
// assumed 3D context state and dirty any state cache.
virtual void onResetContext(uint32_t resetBits) = 0;
// Called before certain draws in order to guarantee coherent results from dst reads.
virtual void xferBarrier(GrRenderTarget*, GrXferBarrierType) = 0;
// overridden by backend-specific derived class to create objects.
// Texture size and sample size will have already been validated in base class before
// onCreateTexture is called.
virtual sk_sp<GrTexture> onCreateTexture(const GrSurfaceDesc&, SkBudgeted,
const GrMipLevel texels[],
int mipLevelCount) = 0;
virtual sk_sp<GrTexture> onWrapBackendTexture(const GrBackendTexture&, GrWrapOwnership) = 0;
virtual sk_sp<GrTexture> onWrapRenderableBackendTexture(const GrBackendTexture&,
int sampleCnt,
GrWrapOwnership) = 0;
virtual sk_sp<GrRenderTarget> onWrapBackendRenderTarget(const GrBackendRenderTarget&) = 0;
virtual sk_sp<GrRenderTarget> onWrapBackendTextureAsRenderTarget(const GrBackendTexture&,
int sampleCnt) = 0;
virtual GrBuffer* onCreateBuffer(size_t size, GrBufferType intendedType, GrAccessPattern,
const void* data) = 0;
virtual bool onIsACopyNeededForTextureParams(GrTextureProxy* proxy, const GrSamplerState&,
GrTextureProducer::CopyParams*,
SkScalar scaleAdjust[2]) const {
return false;
}
virtual bool onGetReadPixelsInfo(GrSurface* srcSurface, GrSurfaceOrigin srcOrigin,
int readWidth, int readHeight,
size_t rowBytes, GrPixelConfig readConfig, DrawPreference*,
ReadPixelTempDrawInfo*) = 0;
virtual bool onGetWritePixelsInfo(GrSurface* dstSurface, GrSurfaceOrigin dstOrigin,
int width, int height,
GrPixelConfig srcConfig, DrawPreference*,
WritePixelTempDrawInfo*) = 0;
// overridden by backend-specific derived class to perform the surface read
virtual bool onReadPixels(GrSurface*, GrSurfaceOrigin,
int left, int top,
int width, int height,
GrPixelConfig,
void* buffer,
size_t rowBytes) = 0;
// overridden by backend-specific derived class to perform the surface write
virtual bool onWritePixels(GrSurface*, GrSurfaceOrigin,
int left, int top, int width, int height,
GrPixelConfig config,
const GrMipLevel texels[], int mipLevelCount) = 0;
// overridden by backend-specific derived class to perform the texture transfer
virtual bool onTransferPixels(GrTexture*,
int left, int top, int width, int height,
GrPixelConfig config, GrBuffer* transferBuffer,
size_t offset, size_t rowBytes) = 0;
// overridden by backend-specific derived class to perform the resolve
virtual void onResolveRenderTarget(GrRenderTarget* target, GrSurfaceOrigin) = 0;
// overridden by backend specific derived class to perform the copy surface
virtual bool onCopySurface(GrSurface* dst, GrSurfaceOrigin dstOrigin,
GrSurface* src, GrSurfaceOrigin srcOrigin,
const SkIRect& srcRect, const SkIPoint& dstPoint) = 0;
// overridden by backend specific derived class to perform the multisample queries
virtual void onQueryMultisampleSpecs(GrRenderTarget*, GrSurfaceOrigin rtOrigin,
const GrStencilSettings&,
int* effectiveSampleCnt, SamplePattern*) = 0;
virtual void onFinishFlush(bool insertedSemaphores) = 0;
virtual void onDumpJSON(SkJSONWriter*) const {}
void resetContext() {
this->onResetContext(fResetBits);
fResetBits = 0;
++fResetTimestamp;
}
struct SamplePatternComparator {
bool operator()(const SamplePattern&, const SamplePattern&) const;
};
typedef std::map<SamplePattern, uint8_t, SamplePatternComparator> MultisampleSpecsIdMap;
ResetTimestamp fResetTimestamp;
uint32_t fResetBits;
MultisampleSpecsIdMap fMultisampleSpecsIdMap;
SkSTArray<1, MultisampleSpecs, true> fMultisampleSpecs;
// The context owns us, not vice-versa, so this ptr is not ref'ed by Gpu.
GrContext* fContext;
friend class GrPathRendering;
typedef SkRefCnt INHERITED;
};
#endif