| /* |
| * Copyright 2015 Google Inc. |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "SkBmpCodec.h" |
| #include "SkCodec.h" |
| #include "SkCodecPriv.h" |
| #include "SkColorSpace.h" |
| #include "SkColorSpaceXform_Base.h" |
| #include "SkData.h" |
| #include "SkGifCodec.h" |
| #include "SkHalf.h" |
| #include "SkIcoCodec.h" |
| #include "SkJpegCodec.h" |
| #ifdef SK_HAS_PNG_LIBRARY |
| #include "SkPngCodec.h" |
| #endif |
| #include "SkRawCodec.h" |
| #include "SkStream.h" |
| #include "SkWbmpCodec.h" |
| #include "SkWebpCodec.h" |
| |
| struct DecoderProc { |
| bool (*IsFormat)(const void*, size_t); |
| SkCodec* (*NewFromStream)(SkStream*); |
| }; |
| |
| static const DecoderProc gDecoderProcs[] = { |
| #ifdef SK_HAS_JPEG_LIBRARY |
| { SkJpegCodec::IsJpeg, SkJpegCodec::NewFromStream }, |
| #endif |
| #ifdef SK_HAS_WEBP_LIBRARY |
| { SkWebpCodec::IsWebp, SkWebpCodec::NewFromStream }, |
| #endif |
| { SkGifCodec::IsGif, SkGifCodec::NewFromStream }, |
| #ifdef SK_HAS_PNG_LIBRARY |
| { SkIcoCodec::IsIco, SkIcoCodec::NewFromStream }, |
| #endif |
| { SkBmpCodec::IsBmp, SkBmpCodec::NewFromStream }, |
| { SkWbmpCodec::IsWbmp, SkWbmpCodec::NewFromStream } |
| }; |
| |
| size_t SkCodec::MinBufferedBytesNeeded() { |
| return WEBP_VP8_HEADER_SIZE; |
| } |
| |
| SkCodec* SkCodec::NewFromStream(SkStream* stream, |
| SkPngChunkReader* chunkReader) { |
| if (!stream) { |
| return nullptr; |
| } |
| |
| std::unique_ptr<SkStream> streamDeleter(stream); |
| |
| // 14 is enough to read all of the supported types. |
| const size_t bytesToRead = 14; |
| SkASSERT(bytesToRead <= MinBufferedBytesNeeded()); |
| |
| char buffer[bytesToRead]; |
| size_t bytesRead = stream->peek(buffer, bytesToRead); |
| |
| // It is also possible to have a complete image less than bytesToRead bytes |
| // (e.g. a 1 x 1 wbmp), meaning peek() would return less than bytesToRead. |
| // Assume that if bytesRead < bytesToRead, but > 0, the stream is shorter |
| // than bytesToRead, so pass that directly to the decoder. |
| // It also is possible the stream uses too small a buffer for peeking, but |
| // we trust the caller to use a large enough buffer. |
| |
| if (0 == bytesRead) { |
| // TODO: After implementing peek in CreateJavaOutputStreamAdaptor.cpp, this |
| // printf could be useful to notice failures. |
| // SkCodecPrintf("Encoded image data failed to peek!\n"); |
| |
| // It is possible the stream does not support peeking, but does support |
| // rewinding. |
| // Attempt to read() and pass the actual amount read to the decoder. |
| bytesRead = stream->read(buffer, bytesToRead); |
| if (!stream->rewind()) { |
| SkCodecPrintf("Encoded image data could not peek or rewind to determine format!\n"); |
| return nullptr; |
| } |
| } |
| |
| // PNG is special, since we want to be able to supply an SkPngChunkReader. |
| // But this code follows the same pattern as the loop. |
| #ifdef SK_HAS_PNG_LIBRARY |
| if (SkPngCodec::IsPng(buffer, bytesRead)) { |
| return SkPngCodec::NewFromStream(streamDeleter.release(), chunkReader); |
| } else |
| #endif |
| { |
| for (DecoderProc proc : gDecoderProcs) { |
| if (proc.IsFormat(buffer, bytesRead)) { |
| return proc.NewFromStream(streamDeleter.release()); |
| } |
| } |
| |
| #ifdef SK_CODEC_DECODES_RAW |
| // Try to treat the input as RAW if all the other checks failed. |
| return SkRawCodec::NewFromStream(streamDeleter.release()); |
| #endif |
| } |
| |
| return nullptr; |
| } |
| |
| SkCodec* SkCodec::NewFromData(sk_sp<SkData> data, SkPngChunkReader* reader) { |
| if (!data) { |
| return nullptr; |
| } |
| return NewFromStream(new SkMemoryStream(data), reader); |
| } |
| |
| SkCodec::SkCodec(int width, int height, const SkEncodedInfo& info, SkStream* stream, |
| sk_sp<SkColorSpace> colorSpace, Origin origin) |
| : fEncodedInfo(info) |
| , fSrcInfo(info.makeImageInfo(width, height, std::move(colorSpace))) |
| , fStream(stream) |
| , fNeedsRewind(false) |
| , fOrigin(origin) |
| , fDstInfo() |
| , fOptions() |
| , fCurrScanline(-1) |
| {} |
| |
| SkCodec::SkCodec(const SkEncodedInfo& info, const SkImageInfo& imageInfo, SkStream* stream, |
| Origin origin) |
| : fEncodedInfo(info) |
| , fSrcInfo(imageInfo) |
| , fStream(stream) |
| , fNeedsRewind(false) |
| , fOrigin(origin) |
| , fDstInfo() |
| , fOptions() |
| , fCurrScanline(-1) |
| {} |
| |
| SkCodec::~SkCodec() {} |
| |
| bool SkCodec::rewindIfNeeded() { |
| // Store the value of fNeedsRewind so we can update it. Next read will |
| // require a rewind. |
| const bool needsRewind = fNeedsRewind; |
| fNeedsRewind = true; |
| if (!needsRewind) { |
| return true; |
| } |
| |
| // startScanlineDecode will need to be called before decoding scanlines. |
| fCurrScanline = -1; |
| // startIncrementalDecode will need to be called before incrementalDecode. |
| fStartedIncrementalDecode = false; |
| |
| // Some codecs do not have a stream. They may hold onto their own data or another codec. |
| // They must handle rewinding themselves. |
| if (fStream && !fStream->rewind()) { |
| return false; |
| } |
| |
| return this->onRewind(); |
| } |
| |
| #define CHECK_COLOR_TABLE \ |
| if (kIndex_8_SkColorType == info.colorType()) { \ |
| if (nullptr == ctable || nullptr == ctableCount) { \ |
| return SkCodec::kInvalidParameters; \ |
| } \ |
| } else { \ |
| if (ctableCount) { \ |
| *ctableCount = 0; \ |
| } \ |
| ctableCount = nullptr; \ |
| ctable = nullptr; \ |
| } |
| |
| |
| SkCodec::Result SkCodec::getPixels(const SkImageInfo& info, void* pixels, size_t rowBytes, |
| const Options* options, SkPMColor ctable[], int* ctableCount) { |
| if (kUnknown_SkColorType == info.colorType()) { |
| return kInvalidConversion; |
| } |
| if (nullptr == pixels) { |
| return kInvalidParameters; |
| } |
| if (rowBytes < info.minRowBytes()) { |
| return kInvalidParameters; |
| } |
| |
| CHECK_COLOR_TABLE; |
| |
| if (!this->rewindIfNeeded()) { |
| return kCouldNotRewind; |
| } |
| |
| // Default options. |
| Options optsStorage; |
| if (nullptr == options) { |
| options = &optsStorage; |
| } else if (options->fSubset) { |
| SkIRect subset(*options->fSubset); |
| if (!this->onGetValidSubset(&subset) || subset != *options->fSubset) { |
| // FIXME: How to differentiate between not supporting subset at all |
| // and not supporting this particular subset? |
| return kUnimplemented; |
| } |
| } |
| |
| // FIXME: Support subsets somehow? Note that this works for SkWebpCodec |
| // because it supports arbitrary scaling/subset combinations. |
| if (!this->dimensionsSupported(info.dimensions())) { |
| return kInvalidScale; |
| } |
| |
| fDstInfo = info; |
| fOptions = *options; |
| |
| // On an incomplete decode, the subclass will specify the number of scanlines that it decoded |
| // successfully. |
| int rowsDecoded = 0; |
| const Result result = this->onGetPixels(info, pixels, rowBytes, *options, ctable, ctableCount, |
| &rowsDecoded); |
| |
| if ((kIncompleteInput == result || kSuccess == result) && ctableCount) { |
| SkASSERT(*ctableCount >= 0 && *ctableCount <= 256); |
| } |
| |
| // A return value of kIncompleteInput indicates a truncated image stream. |
| // In this case, we will fill any uninitialized memory with a default value. |
| // Some subclasses will take care of filling any uninitialized memory on |
| // their own. They indicate that all of the memory has been filled by |
| // setting rowsDecoded equal to the height. |
| if (kIncompleteInput == result && rowsDecoded != info.height()) { |
| // FIXME: (skbug.com/5772) fillIncompleteImage will fill using the swizzler's width, unless |
| // there is a subset. In that case, it will use the width of the subset. From here, the |
| // subset will only be non-null in the case of SkWebpCodec, but it treats the subset |
| // differenty from the other codecs, and it needs to use the width specified by the info. |
| // Set the subset to null so SkWebpCodec uses the correct width. |
| fOptions.fSubset = nullptr; |
| this->fillIncompleteImage(info, pixels, rowBytes, options->fZeroInitialized, info.height(), |
| rowsDecoded); |
| } |
| |
| return result; |
| } |
| |
| SkCodec::Result SkCodec::getPixels(const SkImageInfo& info, void* pixels, size_t rowBytes) { |
| return this->getPixels(info, pixels, rowBytes, nullptr, nullptr, nullptr); |
| } |
| |
| SkCodec::Result SkCodec::startIncrementalDecode(const SkImageInfo& info, void* pixels, |
| size_t rowBytes, const SkCodec::Options* options, SkPMColor* ctable, int* ctableCount) { |
| fStartedIncrementalDecode = false; |
| |
| if (kUnknown_SkColorType == info.colorType()) { |
| return kInvalidConversion; |
| } |
| if (nullptr == pixels) { |
| return kInvalidParameters; |
| } |
| |
| // Ensure that valid color ptrs are passed in for kIndex8 color type |
| CHECK_COLOR_TABLE; |
| |
| // FIXME: If the rows come after the rows of a previous incremental decode, |
| // we might be able to skip the rewind, but only the implementation knows |
| // that. (e.g. PNG will always need to rewind, since we called longjmp, but |
| // a bottom-up BMP could skip rewinding if the new rows are above the old |
| // rows.) |
| if (!this->rewindIfNeeded()) { |
| return kCouldNotRewind; |
| } |
| |
| // Set options. |
| Options optsStorage; |
| if (nullptr == options) { |
| options = &optsStorage; |
| } else if (options->fSubset) { |
| SkIRect size = SkIRect::MakeSize(info.dimensions()); |
| if (!size.contains(*options->fSubset)) { |
| return kInvalidParameters; |
| } |
| |
| const int top = options->fSubset->top(); |
| const int bottom = options->fSubset->bottom(); |
| if (top < 0 || top >= info.height() || top >= bottom || bottom > info.height()) { |
| return kInvalidParameters; |
| } |
| } |
| |
| if (!this->dimensionsSupported(info.dimensions())) { |
| return kInvalidScale; |
| } |
| |
| fDstInfo = info; |
| fOptions = *options; |
| |
| const Result result = this->onStartIncrementalDecode(info, pixels, rowBytes, |
| fOptions, ctable, ctableCount); |
| if (kSuccess == result) { |
| fStartedIncrementalDecode = true; |
| } else if (kUnimplemented == result) { |
| // FIXME: This is temporarily necessary, until we transition SkCodec |
| // implementations from scanline decoding to incremental decoding. |
| // SkAndroidCodec will first attempt to use incremental decoding, but |
| // will fall back to scanline decoding if incremental returns |
| // kUnimplemented. rewindIfNeeded(), above, set fNeedsRewind to true |
| // (after potentially rewinding), but we do not want the next call to |
| // startScanlineDecode() to do a rewind. |
| fNeedsRewind = false; |
| } |
| return result; |
| } |
| |
| |
| SkCodec::Result SkCodec::startScanlineDecode(const SkImageInfo& info, |
| const SkCodec::Options* options, SkPMColor ctable[], int* ctableCount) { |
| // Reset fCurrScanline in case of failure. |
| fCurrScanline = -1; |
| // Ensure that valid color ptrs are passed in for kIndex8 color type |
| CHECK_COLOR_TABLE; |
| |
| if (!this->rewindIfNeeded()) { |
| return kCouldNotRewind; |
| } |
| |
| // Set options. |
| Options optsStorage; |
| if (nullptr == options) { |
| options = &optsStorage; |
| } else if (options->fSubset) { |
| SkIRect size = SkIRect::MakeSize(info.dimensions()); |
| if (!size.contains(*options->fSubset)) { |
| return kInvalidInput; |
| } |
| |
| // We only support subsetting in the x-dimension for scanline decoder. |
| // Subsetting in the y-dimension can be accomplished using skipScanlines(). |
| if (options->fSubset->top() != 0 || options->fSubset->height() != info.height()) { |
| return kInvalidInput; |
| } |
| } |
| |
| // FIXME: Support subsets somehow? |
| if (!this->dimensionsSupported(info.dimensions())) { |
| return kInvalidScale; |
| } |
| |
| const Result result = this->onStartScanlineDecode(info, *options, ctable, ctableCount); |
| if (result != SkCodec::kSuccess) { |
| return result; |
| } |
| |
| fCurrScanline = 0; |
| fDstInfo = info; |
| fOptions = *options; |
| return kSuccess; |
| } |
| |
| #undef CHECK_COLOR_TABLE |
| |
| SkCodec::Result SkCodec::startScanlineDecode(const SkImageInfo& info) { |
| return this->startScanlineDecode(info, nullptr, nullptr, nullptr); |
| } |
| |
| int SkCodec::getScanlines(void* dst, int countLines, size_t rowBytes) { |
| if (fCurrScanline < 0) { |
| return 0; |
| } |
| |
| SkASSERT(!fDstInfo.isEmpty()); |
| if (countLines <= 0 || fCurrScanline + countLines > fDstInfo.height()) { |
| return 0; |
| } |
| |
| const int linesDecoded = this->onGetScanlines(dst, countLines, rowBytes); |
| if (linesDecoded < countLines) { |
| this->fillIncompleteImage(this->dstInfo(), dst, rowBytes, this->options().fZeroInitialized, |
| countLines, linesDecoded); |
| } |
| fCurrScanline += countLines; |
| return linesDecoded; |
| } |
| |
| bool SkCodec::skipScanlines(int countLines) { |
| if (fCurrScanline < 0) { |
| return false; |
| } |
| |
| SkASSERT(!fDstInfo.isEmpty()); |
| if (countLines < 0 || fCurrScanline + countLines > fDstInfo.height()) { |
| // Arguably, we could just skip the scanlines which are remaining, |
| // and return true. We choose to return false so the client |
| // can catch their bug. |
| return false; |
| } |
| |
| bool result = this->onSkipScanlines(countLines); |
| fCurrScanline += countLines; |
| return result; |
| } |
| |
| int SkCodec::outputScanline(int inputScanline) const { |
| SkASSERT(0 <= inputScanline && inputScanline < this->getInfo().height()); |
| return this->onOutputScanline(inputScanline); |
| } |
| |
| int SkCodec::onOutputScanline(int inputScanline) const { |
| switch (this->getScanlineOrder()) { |
| case kTopDown_SkScanlineOrder: |
| return inputScanline; |
| case kBottomUp_SkScanlineOrder: |
| return this->getInfo().height() - inputScanline - 1; |
| default: |
| // This case indicates an interlaced gif and is implemented by SkGifCodec. |
| SkASSERT(false); |
| return 0; |
| } |
| } |
| |
| uint64_t SkCodec::onGetFillValue(const SkImageInfo& dstInfo) const { |
| switch (dstInfo.colorType()) { |
| case kRGBA_F16_SkColorType: { |
| static constexpr uint64_t transparentColor = 0; |
| static constexpr uint64_t opaqueColor = ((uint64_t) SK_Half1) << 48; |
| return (kOpaque_SkAlphaType == fSrcInfo.alphaType()) ? opaqueColor : transparentColor; |
| } |
| default: { |
| // This not only handles the kN32 case, but also k565, kGray8, kIndex8, since |
| // the low bits are zeros. |
| return (kOpaque_SkAlphaType == fSrcInfo.alphaType()) ? |
| SK_ColorBLACK : SK_ColorTRANSPARENT; |
| } |
| } |
| } |
| |
| static void fill_proc(const SkImageInfo& info, void* dst, size_t rowBytes, |
| uint64_t colorOrIndex, SkCodec::ZeroInitialized zeroInit, SkSampler* sampler) { |
| if (sampler) { |
| sampler->fill(info, dst, rowBytes, colorOrIndex, zeroInit); |
| } else { |
| SkSampler::Fill(info, dst, rowBytes, colorOrIndex, zeroInit); |
| } |
| } |
| |
| void SkCodec::fillIncompleteImage(const SkImageInfo& info, void* dst, size_t rowBytes, |
| ZeroInitialized zeroInit, int linesRequested, int linesDecoded) { |
| |
| void* fillDst; |
| const uint64_t fillValue = this->getFillValue(info); |
| const int linesRemaining = linesRequested - linesDecoded; |
| SkSampler* sampler = this->getSampler(false); |
| |
| int fillWidth = info.width(); |
| if (fOptions.fSubset) { |
| fillWidth = fOptions.fSubset->width(); |
| } |
| |
| switch (this->getScanlineOrder()) { |
| case kTopDown_SkScanlineOrder: { |
| const SkImageInfo fillInfo = info.makeWH(fillWidth, linesRemaining); |
| fillDst = SkTAddOffset<void>(dst, linesDecoded * rowBytes); |
| fill_proc(fillInfo, fillDst, rowBytes, fillValue, zeroInit, sampler); |
| break; |
| } |
| case kBottomUp_SkScanlineOrder: { |
| fillDst = dst; |
| const SkImageInfo fillInfo = info.makeWH(fillWidth, linesRemaining); |
| fill_proc(fillInfo, fillDst, rowBytes, fillValue, zeroInit, sampler); |
| break; |
| } |
| } |
| } |
| |
| bool SkCodec::initializeColorXform(const SkImageInfo& dstInfo, |
| SkTransferFunctionBehavior premulBehavior) { |
| fColorXform = nullptr; |
| bool needsColorCorrectPremul = needs_premul(dstInfo, fEncodedInfo) && |
| SkTransferFunctionBehavior::kRespect == premulBehavior; |
| if (needs_color_xform(dstInfo, fSrcInfo, needsColorCorrectPremul)) { |
| fColorXform = SkColorSpaceXform_Base::New(fSrcInfo.colorSpace(), dstInfo.colorSpace(), |
| premulBehavior); |
| if (!fColorXform) { |
| return false; |
| } |
| } else { |
| fColorXform.reset(); |
| } |
| |
| return true; |
| } |
| |
| std::vector<SkCodec::FrameInfo> SkCodec::getFrameInfo() { |
| const int frameCount = this->getFrameCount(); |
| SkASSERT(frameCount >= 0); |
| if (frameCount <= 0) { |
| return std::vector<FrameInfo>{}; |
| } |
| |
| if (frameCount == 1 && !this->onGetFrameInfo(0, nullptr)) { |
| // Not animated. |
| return std::vector<FrameInfo>{}; |
| } |
| |
| std::vector<FrameInfo> result(frameCount); |
| for (int i = 0; i < frameCount; ++i) { |
| SkAssertResult(this->onGetFrameInfo(i, &result[i])); |
| } |
| return result; |
| } |