| /* |
| * Copyright (C) 2011 Google Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef SkPDFDevice_DEFINED |
| #define SkPDFDevice_DEFINED |
| |
| #include "SkCanvas.h" |
| #include "SkDevice.h" |
| #include "SkPaint.h" |
| #include "SkPath.h" |
| #include "SkRefCnt.h" |
| #include "SkStream.h" |
| #include "SkTScopedPtr.h" |
| |
| class SkPDFArray; |
| class SkPDFDevice; |
| class SkPDFDict; |
| class SkPDFFont; |
| class SkPDFFormXObject; |
| class SkPDFGraphicState; |
| class SkPDFObject; |
| class SkPDFShader; |
| class SkPDFStream; |
| |
| // Private classes. |
| struct ContentEntry; |
| struct GraphicStateEntry; |
| |
| class SkPDFDeviceFactory : public SkDeviceFactory { |
| public: |
| virtual SkDevice* newDevice(SkCanvas*, SkBitmap::Config, int width, |
| int height, bool isOpaque, bool isForLayer); |
| }; |
| |
| /** \class SkPDFDevice |
| |
| The drawing context for the PDF backend. |
| */ |
| class SkPDFDevice : public SkDevice { |
| public: |
| /** Create a PDF drawing context with the given width and height. |
| * 72 points/in means letter paper is 612x792. |
| * @param pageSize Page size in points. |
| * @param contentSize The content size of the page in points. This will be |
| * combined with the initial transform to determine the drawing area |
| * (as reported by the width and height methods). Anything outside |
| * of the drawing area will be clipped. |
| * @param initialTransform The initial transform to apply to the page. |
| * This may be useful to, for example, move the origin in and |
| * over a bit to account for a margin, scale the canvas, |
| * or apply a rotation. Note1: the SkPDFDevice also applies |
| * a scale+translate transform to move the origin from the |
| * bottom left (PDF default) to the top left. Note2: drawDevice |
| * (used by layer restore) draws the device after this initial |
| * transform is applied, so the PDF device factory does an |
| * inverse scale+translate to accommodate the one that SkPDFDevice |
| * always does. |
| */ |
| // TODO(vandebo) The sizes should be SkSize and not SkISize. |
| SK_API SkPDFDevice(const SkISize& pageSize, const SkISize& contentSize, |
| const SkMatrix& initialTransform); |
| SK_API virtual ~SkPDFDevice(); |
| |
| virtual uint32_t getDeviceCapabilities() { return kVector_Capability; } |
| |
| virtual void clear(SkColor color); |
| |
| virtual bool readPixels(const SkIRect& srcRect, SkBitmap* bitmap) { |
| return false; |
| } |
| |
| /** These are called inside the per-device-layer loop for each draw call. |
| When these are called, we have already applied any saveLayer operations, |
| and are handling any looping from the paint, and any effects from the |
| DrawFilter. |
| */ |
| virtual void drawPaint(const SkDraw&, const SkPaint& paint); |
| virtual void drawPoints(const SkDraw&, SkCanvas::PointMode mode, |
| size_t count, const SkPoint[], |
| const SkPaint& paint); |
| virtual void drawRect(const SkDraw&, const SkRect& r, const SkPaint& paint); |
| virtual void drawPath(const SkDraw&, const SkPath& origpath, |
| const SkPaint& paint, const SkMatrix* prePathMatrix, |
| bool pathIsMutable); |
| virtual void drawBitmap(const SkDraw&, const SkBitmap& bitmap, |
| const SkIRect* srcRectOrNull, |
| const SkMatrix& matrix, const SkPaint& paint); |
| virtual void drawSprite(const SkDraw&, const SkBitmap& bitmap, int x, int y, |
| const SkPaint& paint); |
| virtual void drawText(const SkDraw&, const void* text, size_t len, |
| SkScalar x, SkScalar y, const SkPaint& paint); |
| virtual void drawPosText(const SkDraw&, const void* text, size_t len, |
| const SkScalar pos[], SkScalar constY, |
| int scalarsPerPos, const SkPaint& paint); |
| virtual void drawTextOnPath(const SkDraw&, const void* text, size_t len, |
| const SkPath& path, const SkMatrix* matrix, |
| const SkPaint& paint); |
| virtual void drawVertices(const SkDraw&, SkCanvas::VertexMode, |
| int vertexCount, const SkPoint verts[], |
| const SkPoint texs[], const SkColor colors[], |
| SkXfermode* xmode, const uint16_t indices[], |
| int indexCount, const SkPaint& paint); |
| virtual void drawDevice(const SkDraw&, SkDevice*, int x, int y, |
| const SkPaint&); |
| |
| // PDF specific methods. |
| |
| /** Returns a reference to the resource dictionary for this device. |
| */ |
| SK_API const SkRefPtr<SkPDFDict>& getResourceDict(); |
| |
| /** Get the list of resources (PDF objects) used on this page. |
| * @param resourceList A list to append the resources to. |
| */ |
| SK_API void getResources(SkTDArray<SkPDFObject*>* resourceList) const; |
| |
| /** Get the fonts used on this device. |
| */ |
| SK_API const SkTDArray<SkPDFFont*>& getFontResources() const; |
| |
| /** Returns the media box for this device. |
| */ |
| SK_API SkRefPtr<SkPDFArray> getMediaBox() const; |
| |
| /** Returns a SkStream with the page contents. The caller is responsible |
| for a reference to the returned value. |
| */ |
| SK_API SkStream* content() const; |
| |
| SK_API const SkMatrix& initialTransform() const { |
| return fInitialTransform; |
| } |
| |
| protected: |
| // override |
| virtual SkDeviceFactory* onNewDeviceFactory(); |
| |
| private: |
| friend class SkPDFDeviceFactory; |
| // TODO(vandebo) push most of SkPDFDevice's state into a core object in |
| // order to get the right access levels without using friend. |
| friend class ScopedContentEntry; |
| |
| SkISize fPageSize; |
| SkISize fContentSize; |
| SkMatrix fInitialTransform; |
| SkClipStack fExistingClipStack; |
| SkRegion fExistingClipRegion; |
| SkRefPtr<SkPDFDict> fResourceDict; |
| |
| SkTDArray<SkPDFGraphicState*> fGraphicStateResources; |
| SkTDArray<SkPDFObject*> fXObjectResources; |
| SkTDArray<SkPDFFont*> fFontResources; |
| SkTDArray<SkPDFShader*> fShaderResources; |
| |
| SkTScopedPtr<ContentEntry> fContentEntries; |
| ContentEntry* fLastContentEntry; |
| |
| // For use by the DeviceFactory. |
| SkPDFDevice(const SkISize& layerSize, const SkClipStack& existingClipStack, |
| const SkRegion& existingClipRegion); |
| |
| // override from SkDevice |
| virtual SkDevice* onCreateCompatibleDevice(SkBitmap::Config config, |
| int width, int height, |
| bool isOpaque, |
| Usage usage); |
| |
| void init(); |
| void cleanUp(); |
| void createFormXObjectFromDevice(SkRefPtr<SkPDFFormXObject>* xobject); |
| |
| // Clear the passed clip from all existing content entries. |
| void clearClipFromContent(const SkClipStack* clipStack, |
| const SkRegion& clipRegion); |
| void drawFormXObjectWithClip(SkPDFFormXObject* form, |
| const SkClipStack* clipStack, |
| const SkRegion& clipRegion, |
| bool invertClip); |
| |
| // If the paint or clip is such that we shouldn't draw anything, this |
| // returns NULL and does not create a content entry. |
| // setUpContentEntry and finishContentEntry can be used directly, but |
| // the preferred method is to use the ScopedContentEntry helper class. |
| ContentEntry* setUpContentEntry(const SkClipStack* clipStack, |
| const SkRegion& clipRegion, |
| const SkMatrix& matrix, |
| const SkPaint& paint, |
| bool hasText, |
| SkRefPtr<SkPDFFormXObject>* dst); |
| void finishContentEntry(SkXfermode::Mode xfermode, |
| SkPDFFormXObject* dst); |
| bool isContentEmpty(); |
| |
| void populateGraphicStateEntryFromPaint(const SkMatrix& matrix, |
| const SkClipStack& clipStack, |
| const SkRegion& clipRegion, |
| const SkPaint& paint, |
| bool hasText, |
| GraphicStateEntry* entry); |
| int addGraphicStateResource(SkPDFGraphicState* gs); |
| |
| void updateFont(const SkPaint& paint, uint16_t glyphID, |
| ContentEntry* contentEntry); |
| int getFontResourceIndex(SkTypeface* typeface, uint16_t glyphID); |
| |
| void internalDrawPaint(const SkPaint& paint, ContentEntry* contentEntry); |
| void internalDrawBitmap(const SkMatrix& matrix, |
| const SkClipStack* clipStack, |
| const SkRegion& clipRegion, |
| const SkBitmap& bitmap, |
| const SkIRect* srcRect, |
| const SkPaint& paint); |
| |
| // Disable the default copy and assign implementation. |
| SkPDFDevice(const SkPDFDevice&); |
| void operator=(const SkPDFDevice&); |
| }; |
| |
| #endif |