powerpc/85xx: remove support for the Freescale P3060

The P3060 was cancelled before it went into production, so there's no point
in supporting it.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 2f79a03..71b8bb7 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -65,7 +65,6 @@
 COBJS-$(CONFIG_PPC_P2040)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P2041)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P3041)	+= ddr-gen3.o
-COBJS-$(CONFIG_PPC_P3060)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P4080)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P5020)	+= ddr-gen3.o
 COBJS-$(CONFIG_BSC9131)		+= ddr-gen3.o
@@ -81,7 +80,6 @@
 COBJS-$(CONFIG_PPC_P2040) += p2041_ids.o
 COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o
 COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
-COBJS-$(CONFIG_PPC_P3060) += p3060_ids.o
 COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
 
@@ -113,7 +111,6 @@
 COBJS-$(CONFIG_PPC_P2040) += p2041_serdes.o
 COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o
 COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
-COBJS-$(CONFIG_PPC_P3060) += p3060_serdes.o
 COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
 
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 21c3ad4..2ef2078 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -534,7 +534,7 @@
 #define fdt_fixup_fman_firmware(x)
 #endif
 
-#if defined(CONFIG_PPC_P4080) || defined(CONFIG_PPC_P3060)
+#if defined(CONFIG_PPC_P4080)
 static void fdt_fixup_usb(void *fdt)
 {
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
diff --git a/arch/powerpc/cpu/mpc85xx/p3060_ids.c b/arch/powerpc/cpu/mpc85xx/p3060_ids.c
deleted file mode 100644
index d32142f..0000000
--- a/arch/powerpc/cpu/mpc85xx/p3060_ids.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-
-#ifdef CONFIG_SYS_DPAA_QBMAN
-struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
-	/* dqrr liodn, frame data liodn, liodn off, sdest */
-	SET_QP_INFO( 1,  2,  1, 0),
-	SET_QP_INFO( 3,  4,  2, 1),
-	SET_QP_INFO( 5,  6,  3, 2),
-	SET_QP_INFO( 7,  8,  4, 3),
-	SET_QP_INFO( 9, 10,  5, 4),
-	SET_QP_INFO(11, 12,  6, 5),
-	SET_QP_INFO(13, 14,  7, 6),
-	SET_QP_INFO(15, 16,  8, 7),
-	SET_QP_INFO(17, 18,  9, 0), /* for now sdest to 0 */
-	SET_QP_INFO(19, 20, 10, 0), /* for now sdest to 0 */
-};
-#endif
-
-struct srio_liodn_id_table srio_liodn_tbl[] = {
-	SET_SRIO_LIODN_1(1, 198),
-	SET_SRIO_LIODN_1(2, 199),
-};
-int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
-
-struct liodn_id_table liodn_tbl[] = {
-	SET_USB_LIODN(1, "fsl-usb2-mph", 127),
-	SET_USB_LIODN(2, "fsl-usb2-dr", 157),
-
-	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193),
-	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194),
-
-	SET_DMA_LIODN(1, 196),
-	SET_DMA_LIODN(2, 197),
-
-	SET_GUTS_LIODN("fsl,srio-rmu", 200, rmuliodnr, 0xd3000),
-
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	SET_QMAN_LIODN(31),
-	SET_BMAN_LIODN(32),
-#endif
-	SET_PME_LIODN(128),
-};
-int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-struct liodn_id_table fman1_liodn_tbl[] = {
-	SET_FMAN_RX_1G_LIODN(1, 0, 11),
-	SET_FMAN_RX_1G_LIODN(1, 1, 12),
-	SET_FMAN_RX_1G_LIODN(1, 2, 13),
-	SET_FMAN_RX_1G_LIODN(1, 3, 14),
-};
-int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
-struct liodn_id_table fman2_liodn_tbl[] = {
-	SET_FMAN_RX_1G_LIODN(2, 0, 16),
-	SET_FMAN_RX_1G_LIODN(2, 1, 17),
-	SET_FMAN_RX_1G_LIODN(2, 2, 18),
-	SET_FMAN_RX_1G_LIODN(2, 3, 19),
-};
-int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
-#endif
-#endif
-
-struct liodn_id_table sec_liodn_tbl[] = {
-	SET_SEC_JR_LIODN_ENTRY(0, 146, 154),
-	SET_SEC_JR_LIODN_ENTRY(1, 147, 155),
-	SET_SEC_JR_LIODN_ENTRY(2, 178, 186),
-	SET_SEC_JR_LIODN_ENTRY(3, 179, 187),
-	SET_SEC_RTIC_LIODN_ENTRY(a, 144),
-	SET_SEC_RTIC_LIODN_ENTRY(b, 145),
-	SET_SEC_RTIC_LIODN_ENTRY(c, 176),
-	SET_SEC_RTIC_LIODN_ENTRY(d, 177),
-	SET_SEC_DECO_LIODN_ENTRY(0, 129, 161),
-	SET_SEC_DECO_LIODN_ENTRY(1, 130, 162),
-	SET_SEC_DECO_LIODN_ENTRY(2, 131, 163),
-	SET_SEC_DECO_LIODN_ENTRY(3, 132, 164),
-	SET_SEC_DECO_LIODN_ENTRY(4, 133, 165),
-};
-int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
-
-struct liodn_id_table liodn_bases[] = {
-	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(96, 106),
-#ifdef CONFIG_SYS_DPAA_FMAN
-	[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32),
-#if (CONFIG_SYS_NUM_FMAN == 2)
-	[FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(64),
-#endif
-#endif
-#ifdef CONFIG_SYS_DPAA_PME
-	[FSL_HW_PORTAL_PME]   = SET_LIODN_BASE_2(116, 133),
-#endif
-};
diff --git a/arch/powerpc/cpu/mpc85xx/p3060_serdes.c b/arch/powerpc/cpu/mpc85xx/p3060_serdes.c
deleted file mode 100644
index e720dcf..0000000
--- a/arch/powerpc/cpu/mpc85xx/p3060_serdes.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include "fsl_corenet_serdes.h"
-
-static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
-	[0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
-		  SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC1,
-		  SGMII_FM1_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2,
-		  NONE, NONE, AURORA, AURORA},
-	[0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, SGMII_FM2_DTSEC3,
-		  SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4,
-		  SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1, SGMII_FM2_DTSEC2,
-		  SGMII_FM1_DTSEC2, NONE, NONE, AURORA, AURORA},
-	[0x16] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1,
-		  AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1,
-		  SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2, SGMII_FM2_DTSEC3,
-		  SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
-	[0x19] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1,
-		  AURORA, AURORA, PCIE2, PCIE2, PCIE2, PCIE2, SGMII_FM2_DTSEC3,
-		  SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
-	[0x1c] = {NONE, NONE, SRIO1, SRIO2,  NONE, NONE, NONE, NONE,
-		  AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1,
-		  SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2, SGMII_FM2_DTSEC3,
-		  SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
-};
-
-enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
-{
-	if (!serdes_lane_enabled(lane))
-		return NONE;
-
-	return serdes_cfg_tbl[cfg][lane];
-}
-
-int is_serdes_prtcl_valid(u32 prtcl)
-{
-	int i;
-
-	if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
-		return 0;
-
-	for (i = 0; i < SRDS_MAX_LANES; i++) {
-		if (serdes_cfg_tbl[prtcl][i] != NONE)
-			return 1;
-	}
-
-	return 0;
-}
-
-void soc_serdes_init(void)
-{
-	/*
-	 * On the P3060 the devdisr2 register does not correctly reflect
-	 * the state of the MACs based on the RCW fields. So disable the MACs
-	 * based on the srds_prtcl and ec1, ec2, ec3 fields
-	 */
-
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 devdisr2 = in_be32(&gur->devdisr2);
-	u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
-
-	/* NOTE: Leave FM1-1,FM1-2 alone for MDIO access */
-
-	if (!is_serdes_configured(SGMII_FM1_DTSEC3))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC1_3;
-
-	if (!is_serdes_configured(SGMII_FM1_DTSEC4))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC1_4;
-
-	if (!is_serdes_configured(SGMII_FM2_DTSEC1))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_1;
-
-	if (!is_serdes_configured(SGMII_FM2_DTSEC2))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_2;
-
-	if (!is_serdes_configured(SGMII_FM2_DTSEC3))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_3;
-
-	if (!is_serdes_configured(SGMII_FM2_DTSEC4))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_4;
-
-	if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
-		FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) {
-		devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC1_2;
-	}
-
-	if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
-		FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1) {
-		devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC2_1;
-	}
-
-	out_be32(&gur->devdisr2, devdisr2);
-}
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 1c615d0..6cc5c4b 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -69,7 +69,6 @@
 	CPU_TYPE_ENTRY(P2040, P2040, 4),
 	CPU_TYPE_ENTRY(P2041, P2041, 4),
 	CPU_TYPE_ENTRY(P3041, P3041, 4),
-	CPU_TYPE_ENTRY_MASK(P3060, P3060, 6, 0xf3),
 	CPU_TYPE_ENTRY(P4040, P4040, 4),
 	CPU_TYPE_ENTRY(P4080, P4080, 8),
 	CPU_TYPE_ENTRY(P5010, P5010, 1),
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 0a780d7..7dd9395 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -379,25 +379,6 @@
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
 
-#elif defined(CONFIG_PPC_P3060)
-#define CONFIG_MAX_CPUS			8
-#define CONFIG_SYS_FSL_NUM_CC_PLLS	4
-#define CONFIG_SYS_FSL_NUM_LAWS		32
-#define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_SYS_NUM_FMAN		2
-#define CONFIG_SYS_NUM_FM1_DTSEC	4
-#define CONFIG_SYS_NUM_FM2_DTSEC	4
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
-#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.2"
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
-#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
-#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
-#define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
-#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
-#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-
 #elif defined(CONFIG_PPC_P4040)
 #define CONFIG_MAX_CPUS			4
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	4
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 9bdfd97..80101bb 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1766,7 +1766,7 @@
 #define FSL_CORENET_RCWSR8_HOST_AGT_B1		0x00e00000
 #define FSL_CORENET_RCWSR8_HOST_AGT_B2		0x00100000
 #define FSL_CORENET_RCWSR11_EC1			0x00c00000 /* bits 360..361 */
-#if defined(CONFIG_PPC_P4080) || defined(CONFIG_PPC_P3060)
+#ifdef CONFIG_PPC_P4080
 #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1		0x00000000
 #define FSL_CORENET_RCWSR11_EC1_FM1_USB1		0x00800000
 #define FSL_CORENET_RCWSR11_EC2			0x001c0000 /* bits 363..365 */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 095b99f..c942bec 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1087,7 +1087,6 @@
 #define SVR_P2040	0x821000
 #define SVR_P2041	0x821001
 #define SVR_P3041	0x821103
-#define SVR_P3060	0x820002
 #define SVR_P4040	0x820100
 #define SVR_P4080	0x820000
 #define SVR_P5010	0x822100
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 0b40dc7..54cb098 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -51,14 +51,12 @@
 COBJS-$(CONFIG_P1022DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P2020DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P3041DS)		+= ics307_clk.o
-COBJS-$(CONFIG_P3060QDS)       	+= ics307_clk.o
 COBJS-$(CONFIG_P4080DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P5020DS)		+= ics307_clk.o
 
 # deal with common files for P-series corenet based devices
 SUBLIB-$(CONFIG_P2041RDB)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P3041DS)	+= p_corenet/libp_corenet.o
-SUBLIB-$(CONFIG_P3060QDS)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P4080DS)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P5020DS)	+= p_corenet/libp_corenet.o
 
diff --git a/board/freescale/p3060qds/Makefile b/board/freescale/p3060qds/Makefile
deleted file mode 100644
index ae136f4..0000000
--- a/board/freescale/p3060qds/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# Copyright 2011 Freescale Semiconductor, Inc.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS-y += $(BOARD).o
-COBJS-y += ddr.o
-COBJS-y += eth.o
-COBJS-y += fixed_ddr.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS-y))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/freescale/p3060qds/README b/board/freescale/p3060qds/README
deleted file mode 100644
index ec62798..0000000
--- a/board/freescale/p3060qds/README
+++ /dev/null
@@ -1,110 +0,0 @@
-Overview
-=========
-The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC.
-
-The P3060 Processor combines six e500mc Power Architecture processor
-cores(1.2GHz) with high-performance datapath acceleration
-architecture(DPAA), CoreNet fabric infrastructure, as well as network
-and peripheral bus interfaces required for networking, telecom/datacom,
-wireless infrastructure, and military/aerospace applications.
-
-
-P3060QDS Board Specifications:
-==============================
-Memory subsystem:
- * 2G Bytes UDIMM DDR3(64bit bus) with ECC on
- * 128M Bytes NOR flash single-chip memory
- * 16M Bytes SPI flash
- * 8K Bytes AT24C64 I2C EEPROM for RCW
-
-Ethernet(Default SERDES 0x19):
- * FM1-dTSEC1: connected to RGMII PHY1 (Vitesse VSC8641 on board,Bottom of dual RJ45)
- * FM1-dTSEC2: connected to RGMII PHY2 (Vitesse VSC8641 on board,Top of dual RJ45)
- * FM1-dTSEC3: connected to SGMII PHY  (Vitesse VSC8234 port1 in slot1)
- * FM1-dTSEC4: connected to SGMII PHY  (Vitesse VSC8234 port3 in slot1)
- * FM2-dTSEC1: connected to SGMII PHY  (Vitesse VSC8234 port0 in slot2)
- * FM2-dTSEC2: connected to SGMII PHY  (Vitesse VSC8234 port2 in slot2)
- * FM2-dTSEC3: connected to SGMII PHY  (Vitesse VSC8234 port0 in slot1)
- * FM2-dTSEC4: connected to SGMII PHY  (Vitesse VSC8234 port2 in slot1)
-
-PCIe:
- * PCIe1: Lanes A, B, C and D of Bank1 are connected to one x4 PCIe SLOT4
- * PCIe2: Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT3
-
-RapidIO:
- * sRIO1: Lanes E, F, G and H of Bank1 are connected to sRIO1 (SLOT3)
- * sRIO2: Lanes A, B, C and D of Bank1 are connected to sRIO2 (SLOT4)
-
-USB:
- * USB1: connected via an external ULPI PHY SMC3315 to a TYPE-A interface
- * USB2: connected via an external ULPI PHY SMC3315 to a TYPE-AB interface
-
-I2C:
- * I2C1_CH0: EEPROM AT24C64(0x50) RCW, AT24C02(0x51) DDR SPD,
-	     AT24C02(0x53) DDR SPD, AT24C02(0x57) SystemID, RTC DS3232(0x68)
- * I2C1_CH1: 1588 RiserCard(0x55), HSLB Testport, TempMon
-	     ADT7461(0x4C), SerDesMux DS64MB201(0x51/59/5C/5D)
- * I2C1_CH2: VDD/GVDD/GIDD ZL6100 (0x21/0x22/0x23/0x24/0x40)
- * I2C1_CH3: OCM CFG AT24C02(0x55), OCM IPL AT24C64(0x56)
- * I2C1_CH4: PCIe SLOT1
- * I2C1_CH5: PCIe SLOT2
- * I2C1_CH6: PCIe SLOT3
- * I2C1_CH7: PCIe SLOT4
- * I2C2: NULL
- * I2C3: NULL
-
-UART:
- * Supports two UARTs up to 115200 bps for console
-
-
-Boot from NOR flash
-===================
-1. Build image
-	export ARCH=powerpc
-	export CROSS_COMPILE=/your_path/gcc-4.5.xx-eglibc-2.11.xx/powerpc-linux-gnu/bin/powerpc-linux-gnu-
-	make P3060QDS_config
-	make
-
-2. Program image
-	=> tftp 1000000 u-boot.bin
-	=> protect off all
-	=> erase eff80000 efffffff
-	=> cp.b 1000000 eff80000 80000
-
-3. Program RCW
-	=> tftp 1000000 rcw.bin
-	=> protect off all
-	=> erase e8000000 e801ffff
-	=> cp.b 1000000 e8000000 50
-
-4. Program FMAN Firmware ucode
-	=> tftp 1000000 ucode.bin
-	=> protect off all
-	=> erase ef000000 ef0fffff
-	=> cp.b 1000000 ef000000 2000
-
-5. Change DIP-switch
-	RCW Location: SW1[1-5] = 01101 (eLBC 16bit NOR flash)
-	Note: 1 stands for 'on', 0 stands for 'off'
-
-
-Using the Device Tree Source File
-=================================
-To create the DTB (Device Tree Binary) image file, use a command
-similar to this:
-	dtc -O dtb -b 0 -p 1024 p3060qds.dts > p3060qds.dtb
-
-Or use the following command:
-	{linux-2.6}/make p3060qds.dtb ARCH=powerpc
-
-then the dtb file will be generated under the following directory:
-	{linux-2.6}/arch/powerpc/boot/p3060qds.dtb
-
-
-Booting Linux
-=============
-Place a linux uImage in the TFTP disk area.
-	tftp 1000000 uImage
-	tftp 2000000 rootfs.ext2.gz.uboot
-	tftp 3000000 p3060rdb.dtb
-	bootm 1000000 2000000 3000000
diff --git a/board/freescale/p3060qds/ddr.c b/board/freescale/p3060qds/ddr.c
deleted file mode 100644
index 9affbf0..0000000
--- a/board/freescale/p3060qds/ddr.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <hwconfig.h>
-#include <asm/mmu.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-#include <asm/fsl_law.h>
-
-#include "p3060qds.h"
-
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-
-phys_size_t fixed_sdram(void)
-{
-	int i;
-	char buf[32];
-	fsl_ddr_cfg_regs_t ddr_cfg_regs;
-	phys_size_t ddr_size;
-	unsigned int lawbar1_target_id;
-	ulong ddr_freq, ddr_freq_mhz;
-
-	ddr_freq = get_ddr_freq(0);
-	ddr_freq_mhz = ddr_freq / 1000000;
-
-	printf("Configuring DDR for %s MT/s data rate\n",
-				strmhz(buf, ddr_freq));
-
-	for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
-		if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
-		   (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
-			memcpy(&ddr_cfg_regs,
-				fixed_ddr_parm_0[i].ddr_settings,
-				sizeof(ddr_cfg_regs));
-			break;
-		}
-	}
-
-	if (fixed_ddr_parm_0[i].max_freq == 0)
-		panic("Unsupported DDR data rate %s MT/s data rate\n",
-			strmhz(buf, ddr_freq));
-
-	ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-	ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN;
-	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
-
-	/*
-	 * setup laws for DDR. If not interleaving, presuming half memory on
-	 * DDR1 and the other half on DDR2
-	 */
-	if (fixed_ddr_parm_0[i].ddr_settings->cs[0].config & 0x20000000) {
-		if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
-				 ddr_size,
-				 LAW_TRGT_IF_DDR_INTRLV) < 0) {
-			printf("ERROR setting Local Access Windows for DDR\n");
-			return 0;
-		}
-	} else {
-		lawbar1_target_id = LAW_TRGT_IF_DDR_1;
-		if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
-				 ddr_size,
-				 lawbar1_target_id) < 0) {
-			printf("ERROR setting Local Access Windows for DDR\n");
-			return 0;
-		}
-	}
-	return ddr_size;
-}
-
-struct board_specific_params {
-	u32 n_ranks;
-	u32 datarate_mhz_high;
-	u32 clk_adjust;
-	u32 wrlvl_start;
-	u32 cpo;
-	u32 write_data_delay;
-	u32 force_2T;
-};
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_params udimm[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi|  clk| wrlvl | cpo  |wrdata|2T
-	 * ranks| mhz|adjst| start |      |delay |
-	 */
-	{4,   850,    4,     6,   0xff,    2,  0},
-	{4,   950,    5,     7,   0xff,    2,  0},
-	{4,  1050,    5,     8,   0xff,    2,  0},
-	{4,  1250,    5,    10,   0xff,    2,  0},
-	{4,  1350,    5,    11,   0xff,    2,  0},
-	{4,  1666,    5,    12,   0xff,    2,  0},
-	{2,   850,    5,     6,   0xff,    2,  0},
-	{2,   950,    5,     7,   0xff,    2,  0},
-	{2,  1250,    4,     6,   0xff,    2,  0},
-	{2,  1350,    5,     7,   0xff,    2,  0},
-	{2,  1666,    5,     8,   0xff,    2,  0},
-	{1,   850,    4,     5,   0xff,    2,  0},
-	{1,   950,    4,     7,   0xff,    2,  0},
-	{1,  1666,    4,     8,   0xff,    2,  0},
-	{}
-};
-
-static const struct board_specific_params rdimm[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi|  clk| wrlvl | cpo  |wrdata|2T
-	 * ranks| mhz|adjst| start |      |delay |
-	 */
-	{4,   850,    4,     6,   0xff,    2,  0},
-	{4,   950,    5,     7,   0xff,    2,  0},
-	{4,  1050,    5,     8,   0xff,    2,  0},
-	{4,  1250,    5,    10,   0xff,    2,  0},
-	{4,  1350,    5,    11,   0xff,    2,  0},
-	{4,  1666,    5,    12,   0xff,    2,  0},
-	{2,   850,    4,     6,   0xff,    2,  0},
-	{2,  1050,    4,     7,   0xff,    2,  0},
-	{2,  1666,    4,     8,   0xff,    2,  0},
-	{1,   850,    4,     5,   0xff,    2,  0},
-	{1,   950,    4,     7,   0xff,    2,  0},
-	{1,  1666,    4,     8,   0xff,    2,  0},
-	{}
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	const struct board_specific_params *pbsp, *pbsp_highest = NULL;
-	ulong ddr_freq;
-
-	if (ctrl_num) {
-		printf("Wrong parameter for controller number %d", ctrl_num);
-		return;
-	}
-	if (!pdimm->n_ranks)
-		return;
-
-	if (popts->registered_dimm_en)
-		pbsp = rdimm;
-	else
-		pbsp = udimm;
-
-	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
-	 * freqency and n_banks specified in board_specific_parameters table.
-	 */
-	ddr_freq = get_ddr_freq(0) / 1000000;
-	while (pbsp->datarate_mhz_high) {
-		if (pbsp->n_ranks == pdimm->n_ranks) {
-			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->cpo_override = pbsp->cpo;
-				popts->write_data_delay =
-					pbsp->write_data_delay;
-				popts->clk_adjust = pbsp->clk_adjust;
-				popts->wrlvl_start = pbsp->wrlvl_start;
-				popts->twoT_en = pbsp->force_2T;
-				goto found;
-			}
-			pbsp_highest = pbsp;
-		}
-		pbsp++;
-	}
-
-	if (pbsp_highest) {
-		printf("Error: board specific timing not found "
-			"for data rate %lu MT/s!\n"
-			"Trying to use the highest speed (%u) parameters\n",
-			ddr_freq, pbsp_highest->datarate_mhz_high);
-		popts->cpo_override = pbsp_highest->cpo;
-		popts->write_data_delay = pbsp_highest->write_data_delay;
-		popts->clk_adjust = pbsp_highest->clk_adjust;
-		popts->wrlvl_start = pbsp_highest->wrlvl_start;
-		popts->twoT_en = pbsp_highest->force_2T;
-	} else {
-		panic("DIMM is not supported by this board");
-	}
-
-
-found:
-
-	/*
-	 * The datasheet of HMT125U7BFR8C-H9 blocks CL=7 as reservered.
-	 * However SPD still claims CL=7 is supported. Extensive tests
-	 * confirmed this board cannot work stably with CL=7 with this
-	 * particular DIMM.
-	 */
-	if (ddr_freq >= 800 && ddr_freq < 1066 && \
-		!strncmp(pdimm[0].mpart, "HMT125U7BFR8C-H9", 16)) {
-		popts->cas_latency_override = 1;
-		popts->cas_latency_override_value = 8;
-		debug("Override CL to 8\n");
-	}
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-	/*
-	 * Write leveling override
-	 */
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xf;
-
-	/*
-	 * Rtt and Rtt_WR override
-	 */
-	popts->rtt_override = 0;
-
-	/* Enable ZQ calibration */
-	popts->zq_en = 1;
-
-	/* DHC_EN =1, ODT = 60 Ohm */
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN;
-}
-
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size;
-
-	puts("Initializing....");
-
-	if (fsl_use_spd()) {
-		puts("using SPD\n");
-		dram_size = fsl_ddr_sdram();
-	} else {
-		puts("using fixed parameters\n");
-		dram_size = fixed_sdram();
-	}
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	debug("    DDR: ");
-	return dram_size;
-}
diff --git a/board/freescale/p3060qds/eth.c b/board/freescale/p3060qds/eth.c
deleted file mode 100644
index 3f812db..0000000
--- a/board/freescale/p3060qds/eth.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <malloc.h>
-#include <fm_eth.h>
-#include <fsl_mdio.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <asm/fsl_dtsec.h>
-
-#include "../common/qixis.h"
-#include "../common/fman.h"
-
-#include "p3060qds_qixis.h"
-
-#define EMI_NONE       0xffffffff
-#define EMI1_RGMII1    0
-#define EMI1_SLOT1     1
-#define EMI1_SLOT2     2
-#define EMI1_SLOT3     3
-#define EMI1_RGMII2    4
-
-static int mdio_mux[NUM_FM_PORTS];
-
-static char *mdio_names[5] = {
-	"P3060QDS_MDIO0",
-	"P3060QDS_MDIO1",
-	"P3060QDS_MDIO2",
-	"P3060QDS_MDIO3",
-	"P3060QDS_MDIO4",
-};
-
-/*
- * Mapping of all 18 SERDES lanes to board slots.
- * A value of '0' here means that the mapping must be determined
- * dynamically, Lane 8/9/16/17 map to Slot1 or Aurora debug
- */
-static u8 lane_to_slot[] = {
-	4, 4, 4, 4, 3, 3, 3, 3, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0
-};
-
-static char *p3060qds_mdio_name_for_muxval(u32 muxval)
-{
-	return mdio_names[muxval];
-}
-
-struct mii_dev *mii_dev_for_muxval(u32 muxval)
-{
-	struct mii_dev *bus;
-	char *name = p3060qds_mdio_name_for_muxval(muxval);
-
-	if (!name) {
-		printf("No bus for muxval %x\n", muxval);
-		return NULL;
-	}
-
-	bus = miiphy_get_dev_by_name(name);
-
-	if (!bus) {
-		printf("No bus by name %s\n", name);
-		return NULL;
-	}
-
-	return bus;
-}
-
-struct p3060qds_mdio {
-	u32 muxval;
-	struct mii_dev *realbus;
-};
-
-static void p3060qds_mux_mdio(u32 muxval)
-{
-	u8 brdcfg4;
-
-	brdcfg4 = QIXIS_READ(brdcfg[4]);
-	brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
-	brdcfg4 |= (muxval << 4);
-	QIXIS_WRITE(brdcfg[4], brdcfg4);
-}
-
-static int p3060qds_mdio_read(struct mii_dev *bus, int addr, int devad,
-				int regnum)
-{
-	struct p3060qds_mdio *priv = bus->priv;
-
-	p3060qds_mux_mdio(priv->muxval);
-
-	return priv->realbus->read(priv->realbus, addr, devad, regnum);
-}
-
-static int p3060qds_mdio_write(struct mii_dev *bus, int addr, int devad,
-				int regnum, u16 value)
-{
-	struct p3060qds_mdio *priv = bus->priv;
-
-	p3060qds_mux_mdio(priv->muxval);
-
-	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
-}
-
-static int p3060qds_mdio_reset(struct mii_dev *bus)
-{
-	struct p3060qds_mdio *priv = bus->priv;
-
-	return priv->realbus->reset(priv->realbus);
-}
-
-static int p3060qds_mdio_init(char *realbusname, u32 muxval)
-{
-	struct p3060qds_mdio *pmdio;
-	struct mii_dev *bus = mdio_alloc();
-
-	if (!bus) {
-		printf("Failed to allocate P3060QDS MDIO bus\n");
-		return -1;
-	}
-
-	pmdio = malloc(sizeof(*pmdio));
-	if (!pmdio) {
-		printf("Failed to allocate P3060QDS private data\n");
-		free(bus);
-		return -1;
-	}
-
-	bus->read = p3060qds_mdio_read;
-	bus->write = p3060qds_mdio_write;
-	bus->reset = p3060qds_mdio_reset;
-	sprintf(bus->name, p3060qds_mdio_name_for_muxval(muxval));
-
-	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
-
-	if (!pmdio->realbus) {
-		printf("No bus with name %s\n", realbusname);
-		free(bus);
-		free(pmdio);
-		return -1;
-	}
-
-	pmdio->muxval = muxval;
-	bus->priv = pmdio;
-
-	return mdio_register(bus);
-}
-
-void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
-				enum fm_port port, int offset)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
-			  FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
-	if (mdio_mux[port] == EMI1_RGMII1)
-		fdt_set_phy_handle(blob, prop, pa, "phy_rgmii1");
-
-	if (mdio_mux[port] == EMI1_RGMII2)
-		fdt_set_phy_handle(blob, prop, pa, "phy_rgmii2");
-
-	if ((mdio_mux[port] == EMI1_SLOT1) && ((srds_prtcl == 0x3)
-		|| (srds_prtcl == 0x6))) {
-		switch (port) {
-		case FM2_DTSEC4:
-			fdt_set_phy_handle(blob, prop, pa, "phy2_slot1");
-			break;
-		case FM1_DTSEC4:
-			fdt_set_phy_handle(blob, prop, pa, "phy3_slot1");
-			break;
-		default:
-			break;
-		}
-	}
-
-	if (mdio_mux[port] == EMI1_SLOT3) {
-		switch (port) {
-		case FM2_DTSEC3:
-			fdt_set_phy_handle(blob, prop, pa, "phy0_slot3");
-			break;
-		case FM1_DTSEC3:
-			fdt_set_phy_handle(blob, prop, pa, "phy1_slot3");
-			break;
-		default:
-			break;
-		}
-	}
-}
-
-void fdt_fixup_board_enet(void *fdt)
-{
-	int i, lane, idx;
-
-	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
-		idx = i - FM1_DTSEC1;
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_SGMII:
-			lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
-			if (lane < 0)
-				break;
-
-			switch (mdio_mux[i]) {
-			case EMI1_SLOT1:
-				if (lane >= 14) {
-					fdt_status_okay_by_alias(fdt,
-						"emi1_slot1");
-					fdt_status_disabled_by_alias(fdt,
-						"emi1_slot1_bk1");
-				} else {
-					fdt_status_disabled_by_alias(fdt,
-						"emi1_slot1");
-					fdt_status_okay_by_alias(fdt,
-						"emi1_slot1_bk1");
-				}
-				break;
-			case EMI1_SLOT2:
-				fdt_status_okay_by_alias(fdt, "emi1_slot2");
-				break;
-			case EMI1_SLOT3:
-				fdt_status_okay_by_alias(fdt, "emi1_slot3");
-				break;
-			}
-		break;
-		case PHY_INTERFACE_MODE_RGMII:
-			if (i == FM1_DTSEC1)
-				fdt_status_okay_by_alias(fdt, "emi1_rgmii1");
-
-			if (i == FM1_DTSEC2)
-				fdt_status_okay_by_alias(fdt, "emi1_rgmii2");
-			break;
-		default:
-			break;
-		}
-	}
-#if (CONFIG_SYS_NUM_FMAN == 2)
-	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
-		idx = i - FM2_DTSEC1;
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_SGMII:
-			lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
-			if (lane >= 0) {
-				switch (mdio_mux[i]) {
-				case EMI1_SLOT1:
-					if (lane >= 14)
-						fdt_status_okay_by_alias(fdt,
-							"emi1_slot1");
-					else
-						fdt_status_okay_by_alias(fdt,
-							"emi1_slot1_bk1");
-					break;
-				case EMI1_SLOT2:
-					fdt_status_okay_by_alias(fdt,
-						"emi1_slot2");
-					break;
-				case EMI1_SLOT3:
-					fdt_status_okay_by_alias(fdt,
-						"emi1_slot3");
-					break;
-				}
-			}
-			break;
-		default:
-			break;
-		}
-	}
-#endif
-}
-
-static void initialize_lane_to_slot(void)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	int sdprtl = (in_be32(&gur->rcwsr[4]) &
-				FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
-	switch (sdprtl) {
-	case 0x03:
-	case 0x06:
-		lane_to_slot[8] = 1;
-		lane_to_slot[9] = lane_to_slot[8];
-		lane_to_slot[16] = 5;
-		lane_to_slot[17] = lane_to_slot[16];
-		break;
-	case 0x16:
-	case 0x19:
-	case 0x1C:
-		lane_to_slot[8] = 5;
-		lane_to_slot[9] = lane_to_slot[8];
-		lane_to_slot[16] = 1;
-		lane_to_slot[17] = lane_to_slot[16];
-		break;
-	default:
-		puts("Invalid SerDes protocol for P3060QDS\n");
-		break;
-	}
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_FMAN_ENET
-	struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
-	int i;
-	struct fsl_pq_mdio_info dtsec_mdio_info;
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	int srds_cfg = (in_be32(&gur->rcwsr[4]) &
-				FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
-	initialize_lane_to_slot();
-
-	/*
-	 * Set TBIPA on FM1@DTSEC1.  This is needed for configurations
-	 * where FM1@DTSEC1 isn't used directly, since it provides
-	 * MDIO for other ports.
-	 */
-	out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
-
-	/* Initialize the mdio_mux array so we can recognize empty elements */
-	for (i = 0; i < NUM_FM_PORTS; i++)
-		mdio_mux[i] = EMI_NONE;
-
-	dtsec_mdio_info.regs =
-		(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
-	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
-
-	/* Register the 1G MDIO bus */
-	fsl_pq_mdio_init(bis, &dtsec_mdio_info);
-
-	/* Register the 5 muxing front-ends to the MDIO buses */
-	if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_RGMII)
-		p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
-
-	if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_RGMII)
-		p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
-	p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
-	p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
-	p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
-
-	if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_RGMII)
-		fm_info_set_phy_address(FM1_DTSEC1, 1); /* RGMII1 */
-	else if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_SGMII)
-		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT2_PHY_ADDR);
-
-	if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_RGMII)
-		fm_info_set_phy_address(FM1_DTSEC2, 2); /* RGMII2 */
-	else if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_SGMII)
-		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
-
-	fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
-	fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT3_PHY_ADDR);
-
-	switch (srds_cfg) {
-	case 0x03:
-	case 0x06:
-		fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
-		fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT4_PHY_ADDR);
-		fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT1_PHY_ADDR);
-		fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT2_PHY_ADDR);
-		break;
-	case 0x16:
-	case 0x19:
-	case 0x1C:
-		fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT1_PHY_ADDR);
-		fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT2_PHY_ADDR);
-		fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT3_PHY_ADDR);
-		fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
-		break;
-	default:
-		puts("Invalid SerDes protocol for P3060QDS\n");
-		break;
-	}
-
-	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
-		int idx = i - FM1_DTSEC1, lane, slot;
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_SGMII:
-			lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
-			if (lane < 0)
-				break;
-			slot = lane_to_slot[lane];
-			if (QIXIS_READ(present) & (1 << (slot - 1)))
-				fm_disable_port(i);
-			switch (slot) {
-			case 1:
-				mdio_mux[i] = EMI1_SLOT1;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			case 2:
-				mdio_mux[i] = EMI1_SLOT2;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			case 3:
-				mdio_mux[i] = EMI1_SLOT3;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			};
-			break;
-		case PHY_INTERFACE_MODE_RGMII:
-			if (i == FM1_DTSEC1) {
-				mdio_mux[i] = EMI1_RGMII1;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-			} else if (i == FM1_DTSEC2) {
-				mdio_mux[i] = EMI1_RGMII2;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-			}
-			break;
-		default:
-			break;
-		}
-	}
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
-	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
-		int idx = i - FM2_DTSEC1, lane, slot;
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_SGMII:
-			lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
-			if (lane < 0)
-				break;
-			slot = lane_to_slot[lane];
-			if (QIXIS_READ(present) & (1 << (slot - 1)))
-				fm_disable_port(i);
-			switch (slot) {
-			case 1:
-				mdio_mux[i] = EMI1_SLOT1;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			case 2:
-				mdio_mux[i] = EMI1_SLOT2;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			case 3:
-				mdio_mux[i] = EMI1_SLOT3;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			};
-			break;
-		default:
-			break;
-		}
-	}
-#endif /* CONFIG_SYS_NUM_FMAN */
-
-	cpu_eth_init(bis);
-#endif /* CONFIG_FMAN_ENET */
-
-	return pci_eth_init(bis);
-}
diff --git a/board/freescale/p3060qds/fixed_ddr.c b/board/freescale/p3060qds/fixed_ddr.c
deleted file mode 100644
index 125988d..0000000
--- a/board/freescale/p3060qds/fixed_ddr.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#define CONFIG_SYS_DDR_TIMING_3_1200	0x01030000
-#define CONFIG_SYS_DDR_TIMING_0_1200	0xCC550104
-#define CONFIG_SYS_DDR_TIMING_1_1200	0x868FAA45
-#define CONFIG_SYS_DDR_TIMING_2_1200	0x0FB8A912
-#define CONFIG_SYS_DDR_MODE_1_1200	0x00441A40
-#define CONFIG_SYS_DDR_MODE_2_1200	0x00100000
-#define CONFIG_SYS_DDR_INTERVAL_1200	0x12480100
-#define CONFIG_SYS_DDR_CLK_CTRL_1200	0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_1000	0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_1000	0xCC440104
-#define CONFIG_SYS_DDR_TIMING_1_1000	0x727DF944
-#define CONFIG_SYS_DDR_TIMING_2_1000	0x0FB088CF
-#define CONFIG_SYS_DDR_MODE_1_1000	0x00441830
-#define CONFIG_SYS_DDR_MODE_2_1000	0x00080000
-#define CONFIG_SYS_DDR_INTERVAL_1000	0x0F3C0100
-#define CONFIG_SYS_DDR_CLK_CTRL_1000	0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_900	0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_900	0xCC440104
-#define CONFIG_SYS_DDR_TIMING_1_900	0x616ba844
-#define CONFIG_SYS_DDR_TIMING_2_900	0x0fb088ce
-#define CONFIG_SYS_DDR_MODE_1_900	0x00441620
-#define CONFIG_SYS_DDR_MODE_2_900	0x00080000
-#define CONFIG_SYS_DDR_INTERVAL_900	0x0db60100
-#define CONFIG_SYS_DDR_CLK_CTRL_900	0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_800	0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_800	0xcc330104
-#define CONFIG_SYS_DDR_TIMING_1_800	0x6f6b4744
-#define CONFIG_SYS_DDR_TIMING_2_800	0x0fa888cc
-#define CONFIG_SYS_DDR_MODE_1_800	0x00441420
-#define CONFIG_SYS_DDR_MODE_2_800	0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_800	0x0c300100
-#define CONFIG_SYS_DDR_CLK_CTRL_800	0x02800000
-
-#define CONFIG_SYS_DDR_CS0_BNDS		0x000000FF
-#define CONFIG_SYS_DDR_CS1_BNDS		0x00000000
-#define CONFIG_SYS_DDR_CS2_BNDS		0x000000FF
-#define CONFIG_SYS_DDR_CS3_BNDS		0x000000FF
-#define CONFIG_SYS_DDR2_CS0_BNDS	0x000000FF
-#define CONFIG_SYS_DDR2_CS1_BNDS	0x00000000
-#define CONFIG_SYS_DDR2_CS2_BNDS	0x000000FF
-#define CONFIG_SYS_DDR2_CS3_BNDS	0x000000FF
-#define CONFIG_SYS_DDR_CS0_CONFIG	0xA0044202
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG	0x80004202
-#define CONFIG_SYS_DDR_CS2_CONFIG	0x00000000
-#define CONFIG_SYS_DDR_CS3_CONFIG	0x00000000
-#define CONFIG_SYS_DDR2_CS0_CONFIG	0x80044202
-#define CONFIG_SYS_DDR2_CS1_CONFIG	0x80004202
-#define CONFIG_SYS_DDR2_CS2_CONFIG	0x00000000
-#define CONFIG_SYS_DDR2_CS3_CONFIG	0x00000000
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG	0x80004202
-#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
-#define CONFIG_SYS_DDR_TIMING_4		0x00000001
-#define CONFIG_SYS_DDR_TIMING_5		0x02401400
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-#define CONFIG_SYS_DDR_ZQ_CNTL		0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CNTL	0x8675F607
-#define CONFIG_SYS_DDR_SDRAM_CFG	0xE7044000
-#define CONFIG_SYS_DDR_SDRAM_CFG2	0x24401031
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
-	.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
-	.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
-	.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
-	.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_900 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
-	.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
-	.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
-	.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
-	.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_900,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_900,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_900,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_900,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_900,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_900,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_900,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_900,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_1000 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
-	.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
-	.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
-	.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
-	.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1000,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1000,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1000,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1000,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1000,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1000,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1000,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1000,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_1200 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
-	.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
-	.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
-	.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
-	.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1200,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1200,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1200,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1200,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1200,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1200,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1200,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1200,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fixed_ddr_parm_t fixed_ddr_parm_0[] = {
-	{750, 850, &ddr_cfg_regs_800},
-	{850, 950, &ddr_cfg_regs_900},
-	{950, 1050, &ddr_cfg_regs_1000},
-	{1050, 1250, &ddr_cfg_regs_1200},
-	{0, 0, NULL}
-};
diff --git a/board/freescale/p3060qds/p3060qds.c b/board/freescale/p3060qds/p3060qds.c
deleted file mode 100644
index 43e7f28..0000000
--- a/board/freescale/p3060qds/p3060qds.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright 2011-2012 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <linux/compiler.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <fm_eth.h>
-#include <configs/P3060QDS.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-#include "../common/qixis.h"
-#include "p3060qds.h"
-#include "p3060qds_qixis.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	u8 sw;
-	struct cpu_type *cpu = gd->cpu;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	unsigned int i;
-
-	printf("Board: %s", cpu->name);
-	puts("QDS, ");
-
-	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
-		QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
-
-	sw = QIXIS_READ(brdcfg[0]);
-	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
-
-	if (sw < 0x8)
-		printf("vBank: %d\n", sw);
-	else if (sw == 0x8)
-		puts("Promjet\n");
-	else if (sw == 0x9)
-		puts("NAND\n");
-	else
-		printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
-
-	puts("Reset Configuration Word (RCW):");
-	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
-		u32 rcw = in_be32(&gur->rcwsr[i]);
-
-		if ((i % 4) == 0)
-			printf("\n       %08x:", i * 4);
-		printf(" %08x", rcw);
-	}
-	puts("\n");
-
-	puts("SERDES Reference Clocks: ");
-	sw = QIXIS_READ(brdcfg[2]);
-	for (i = 0; i < 3; i++) {
-		static const char * const freq[] = {"100", "125", "Reserved",
-						"156.25"};
-		unsigned int clock = (sw >> (2 * i)) & 3;
-
-		printf("Bank%u=%sMhz ", i+1, freq[clock]);
-	}
-	puts("\n");
-
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	/* only single DDR controller on QDS board, disable DDR1_MCK4/5 */
-	setbits_be32(&gur->ddrclkdr, 0x00030000);
-
-	return 0;
-}
-
-void board_config_serdes_mux(void)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	int cfg = (in_be32(&gur->rcwsr[4]) &
-			FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
-	switch (cfg) {
-	case 0x03:
-	case 0x06:
-		/* set Lane I,J as SGMII */
-		QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_B | BRDCFG6_SD3MX_A |
-				       BRDCFG6_SD2MX_B | BRDCFG6_SD1MX_A);
-		break;
-	case 0x16:
-	case 0x19:
-	case 0x1c:
-		/* set Lane I,J as Aurora Debug */
-		QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_A | BRDCFG6_SD3MX_B |
-				       BRDCFG6_SD2MX_A | BRDCFG6_SD1MX_B);
-		break;
-	default:
-		puts("Invalid SerDes protocol for P3060QDS\n");
-		break;
-	}
-}
-
-void board_config_usb_mux(void)
-{
-	u8 brdcfg4, brdcfg5, brdcfg7;
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
-	u32 ec1 = rcwsr11 & FSL_CORENET_RCWSR11_EC1;
-	u32 ec2 = rcwsr11 & FSL_CORENET_RCWSR11_EC2;
-
-	brdcfg4 = QIXIS_READ(brdcfg[4]);
-	brdcfg4 &= ~BRDCFG4_EC_MODE_MASK;
-	if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) &&
-		 (ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) {
-		brdcfg4 |= BRDCFG4_EC2_USB_EC1_USB;
-
-	} else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) &&
-		 ((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) ||
-		 (ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) {
-		brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_USB;
-
-	} else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) &&
-		 (ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) {
-		brdcfg4 |= BRDCFG4_EC2_USB_EC1_RGMII;
-
-	} else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) &&
-		 ((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) ||
-		 (ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) {
-		brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_RGMII;
-	} else {
-		brdcfg4 |= BRDCFG4_EC2_MII_EC1_MII;
-	}
-	QIXIS_WRITE(brdcfg[4], brdcfg4);
-
-	brdcfg5 = QIXIS_READ(brdcfg[5]);
-	brdcfg5 &= ~(BRDCFG5_USB1ID_MASK | BRDCFG5_USB2ID_MASK);
-	brdcfg5 |= (BRDCFG5_USB1ID_CTRL | BRDCFG5_USB2ID_CTRL);
-	QIXIS_WRITE(brdcfg[5], brdcfg5);
-
-	brdcfg7 = BRDCFG7_JTAGMX_COP_JTAG | BRDCFG7_IQ1MX_IRQ_EVT |
-		BRDCFG7_G1MX_USB1 | BRDCFG7_D1MX_TSEC3USB | BRDCFG7_I3MX_USB1;
-	QIXIS_WRITE(brdcfg[7], brdcfg7);
-}
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash + PROMJET region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	/* invalidate existing TLB entry for flash + promjet */
-	disable_tlb(flash_esel);
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
-	board_config_serdes_mux();
-	board_config_usb_mux();
-
-	return 0;
-}
-
-static const char *serdes_clock_to_string(u32 clock)
-{
-	switch (clock) {
-	case SRDS_PLLCR0_RFCK_SEL_100:
-		return "100";
-	case SRDS_PLLCR0_RFCK_SEL_125:
-		return "125";
-	case SRDS_PLLCR0_RFCK_SEL_156_25:
-		return "156.25";
-	default:
-		return "150";
-	}
-}
-
-#define NUM_SRDS_BANKS	3
-
-int misc_init_r(void)
-{
-	serdes_corenet_t *srds_regs;
-	u32 actual[NUM_SRDS_BANKS];
-	unsigned int i;
-	u8 sw;
-
-	sw = QIXIS_READ(brdcfg[2]);
-	for (i = 0; i < 3; i++) {
-		unsigned int clock = (sw >> (2 * i)) & 3;
-		switch (clock) {
-		case 0:
-			actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
-			break;
-		case 1:
-			actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
-			break;
-		case 3:
-			actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
-			break;
-		default:
-			printf("Warning: SDREFCLK%u switch setting of '10' is "
-				"unsupported\n", i + 1);
-			break;
-		}
-	}
-
-	srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
-	for (i = 0; i < NUM_SRDS_BANKS; i++) {
-		u32 pllcr0 = in_be32(&srds_regs->bank[i].pllcr0);
-		u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
-		if (expected != actual[i]) {
-			printf("Warning: SERDES bank %u expects reference clock"
-			       " %sMHz, but actual is %sMHz\n", i + 1,
-			       serdes_clock_to_string(expected),
-			       serdes_clock_to_string(actual[i]));
-		}
-	}
-
-	return 0;
-}
-
-/*
- * This is map of CVDD values. 33 means CVDD is 3.3v, 25 means CVDD is 2.5v,
- * 18 means CVDD is 1.8v.
- */
-static u8 IO_VSEL[] = {
-	33, 33, 33, 25, 25, 25, 18, 18, 18,
-	33, 33, 33, 25, 25, 25, 18, 18, 18,
-	33, 33, 33, 25, 25, 25, 18, 18, 18,
-	33, 33, 33, 33, 33
-};
-
-#define IO_VSEL_MASK	0x1f
-
-/*
- * different CVDD selects diffenert spi flashs, read dutcfg[3] to get CVDD,
- * then set status of  spi flash nodes to 'disabled' according to CVDD.
- * CVDD '33' will select spi flash0 and flash1, CVDD '25' will select spi
- * flash2, CVDD '18' will select spi flash3.
- */
-void fdt_fixup_board_spi(void *blob)
-{
-	u8 sw5 = QIXIS_READ(dutcfg[3]);
-
-	switch (IO_VSEL[sw5 & IO_VSEL_MASK]) {
-	/* 3.3v */
-	case 33:
-		do_fixup_by_compat(blob, "atmel,at45db081d", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		do_fixup_by_compat(blob, "spansion,sst25wf040", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		break;
-	/* 2.5v */
-	case 25:
-		do_fixup_by_compat(blob, "spansion,s25sl12801", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		do_fixup_by_compat(blob, "spansion,en25q32", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		do_fixup_by_compat(blob, "spansion,sst25wf040", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		break;
-	/* 1.8v */
-	case 18:
-		do_fixup_by_compat(blob, "spansion,s25sl12801", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		do_fixup_by_compat(blob, "spansion,en25q32", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		do_fixup_by_compat(blob, "atmel,at45db081d", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		break;
-	}
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = getenv_bootm_low();
-	size = getenv_bootm_size();
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-	fdt_fixup_dr_usb(blob, bd);
-#endif
-
-#ifdef CONFIG_PCI
-	pci_of_setup(blob, bd);
-#endif
-
-	fdt_fixup_liodn(blob);
-	fdt_fixup_dr_usb(blob, bd);
-	fdt_fixup_board_spi(blob);
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-	fdt_fixup_fman_ethernet(blob);
-	fdt_fixup_board_enet(blob);
-#endif
-}
diff --git a/board/freescale/p3060qds/p3060qds.h b/board/freescale/p3060qds/p3060qds.h
deleted file mode 100644
index 3da6815..0000000
--- a/board/freescale/p3060qds/p3060qds.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __P3060QDS_H__
-#define __P3060QDS_H__
-
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/u-boot.h>
-
-void fdt_fixup_board_enet(void *blob);
-void pci_of_setup(void *blob, bd_t *bd);
-extern fixed_ddr_parm_t fixed_ddr_parm_0[];
-
-#endif
diff --git a/board/freescale/p3060qds/p3060qds_qixis.h b/board/freescale/p3060qds/p3060qds_qixis.h
deleted file mode 100644
index 4d5d6a2..0000000
--- a/board/freescale/p3060qds/p3060qds_qixis.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __P3060QDS_QIXIS_H__
-#define __P3060QDS_QIXIS_H__
-
-/* Definitions of QIXIS Registers for P3060QDS */
-
-/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
-#define BRDCFG4_EC_MODE_MASK		0x0F
-#define BRDCFG4_EC2_MII_EC1_MII	0x00
-#define BRDCFG4_EC2_MII_EC1_USB	0x03
-#define BRDCFG4_EC2_USB_EC1_MII	0x0C
-#define BRDCFG4_EC2_USB_EC1_USB	0x0F
-#define BRDCFG4_EC2_USB_EC1_RGMII	0x0E
-#define BRDCFG4_EC2_RGMII_EC1_USB	0x0B
-#define BRDCFG4_EC2_RGMII_EC1_RGMII	0x0A
-#define BRDCFG4_EMISEL_MASK		0xF0
-
-#define BRDCFG5_ECLKS_MASK		0x80
-#define BRDCFG5_USB1ID_MASK		0x40
-#define BRDCFG5_USB2ID_MASK		0x20
-#define BRDCFG5_GC2MX_MASK		0x0C
-#define BRDCFG5_T15MX_MASK		0x03
-#define BRDCFG5_ECLKS_IEEE1588_CM	0x80
-#define BRDCFG5_USB1ID_CTRL		0x40
-#define BRDCFG5_USB2ID_CTRL		0x20
-
-#define BRDCFG6_SD1MX_A		0x01
-#define BRDCFG6_SD1MX_B		0x00
-#define BRDCFG6_SD2MX_A		0x02
-#define BRDCFG6_SD2MX_B		0x00
-#define BRDCFG6_SD3MX_A		0x04
-#define BRDCFG6_SD3MX_B		0x00
-#define BRDCFG6_SD4MX_A		0x08
-#define BRDCFG6_SD4MX_B		0x00
-
-#define BRDCFG7_JTAGMX_MASK		0xC0
-#define BRDCFG7_IQ1MX_MASK		0x20
-#define BRDCFG7_G1MX_MASK		0x10
-#define BRDCFG7_D1MX_MASK		0x0C
-#define BRDCFG7_I3MX_MASK		0x03
-#define BRDCFG7_JTAGMX_AURORA		0x00
-#define BRDCFG7_JTAGMX_FPGA		0x80
-#define BRDCFG7_JTAGMX_COP_JTAG	0xC0
-#define BRDCFG7_IQ1MX_IRQ_EVT		0x00
-#define BRDCFG7_IQ1MX_USB2		0x20
-#define BRDCFG7_G1MX_USB1		0x00
-#define BRDCFG7_G1MX_TSEC3		0x10
-#define BRDCFG7_D1MX_DMA		0x00
-#define BRDCFG7_D1MX_TSEC3USB		0x04
-#define BRDCFG7_D1MX_HDLC2		0x08
-#define BRDCFG7_I3MX_UART2_I2C34	0x00
-#define BRDCFG7_I3MX_GPIO_EVT		0x01
-#define BRDCFG7_I3MX_USB1		0x02
-#define BRDCFG7_I3MX_TSEC3		0x03
-
-#endif
diff --git a/boards.cfg b/boards.cfg
index f102f7a..dce754f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -794,9 +794,6 @@
 P3041DS_SECURE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:SECURE_BOOT
 P3041DS_SPIFLASH	     powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
 P3041DS_SRIO_PCIE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
-P3060QDS		     powerpc	 mpc85xx     p3060qds		 freescale
-P3060QDS_NAND		     powerpc     mpc85xx     p3060qds		 freescale	-	    P3060QDS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
-P3060QDS_SECURE_BOOT         powerpc     mpc85xx     p3060qds            freescale      -           P3060QDS:SECURE_BOOT
 P4080DS                      powerpc     mpc85xx     corenet_ds          freescale
 P4080DS_SDCARD		     powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
 P4080DS_SECURE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:SECURE_BOOT
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 072b178..9692575 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -39,7 +39,6 @@
 COBJS-$(CONFIG_PPC_P2040) += p5020.o
 COBJS-$(CONFIG_PPC_P2041) += p5020.o
 COBJS-$(CONFIG_PPC_P3041) += p5020.o
-COBJS-$(CONFIG_PPC_P3060) += p3060.o
 COBJS-$(CONFIG_PPC_P4080) += p4080.o
 COBJS-$(CONFIG_PPC_P5020) += p5020.o
 endif
diff --git a/drivers/net/fm/p3060.c b/drivers/net/fm/p3060.c
deleted file mode 100644
index c9748a9..0000000
--- a/drivers/net/fm/p3060.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <phy.h>
-#include <fm_eth.h>
-#include <asm/io.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_serdes.h>
-
-u32 port_to_devdisr[] = {
-	[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
-	[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
-	[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
-	[FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
-	[FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1,
-	[FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2,
-	[FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3,
-	[FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4,
-};
-
-static int is_device_disabled(enum fm_port port)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 devdisr2 = in_be32(&gur->devdisr2);
-
-	return port_to_devdisr[port] & devdisr2;
-}
-
-void fman_disable_port(enum fm_port port)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	/* don't allow disabling of DTSEC1 as its needed for MDIO */
-	if (port == FM1_DTSEC1)
-		return;
-
-	setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
-}
-
-phy_interface_t fman_port_enet_if(enum fm_port port)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
-
-	if (is_device_disabled(port))
-		return PHY_INTERFACE_MODE_NONE;
-
-	/* handle RGMII/MII first */
-	if ((port == FM1_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) ==
-		FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1))
-		return PHY_INTERFACE_MODE_RGMII;
-
-	if ((port == FM1_DTSEC2) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
-		FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2))
-		return PHY_INTERFACE_MODE_RGMII;
-
-	if ((port == FM2_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
-		FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))
-		return PHY_INTERFACE_MODE_RGMII;
-
-	switch (port) {
-	case FM1_DTSEC1:
-	case FM1_DTSEC2:
-	case FM1_DTSEC3:
-	case FM1_DTSEC4:
-		if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
-			return PHY_INTERFACE_MODE_SGMII;
-		break;
-	case FM2_DTSEC1:
-	case FM2_DTSEC2:
-	case FM2_DTSEC3:
-	case FM2_DTSEC4:
-		if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1))
-			return PHY_INTERFACE_MODE_SGMII;
-		break;
-	default:
-		return PHY_INTERFACE_MODE_NONE;
-	}
-
-	return PHY_INTERFACE_MODE_NONE;
-}
diff --git a/include/configs/P3060QDS.h b/include/configs/P3060QDS.h
deleted file mode 100644
index 8006547..0000000
--- a/include/configs/P3060QDS.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * P3060 QDS board configuration file
- */
-#define CONFIG_P3060QDS
-#define CONFIG_PHYS_64BIT
-#define CONFIG_PPC_P3060
-#define CONFIG_FSL_QIXIS
-
-#define CONFIG_NAND_FSL_ELBC
-
-#define CONFIG_ICS307_REFCLK_HZ	25000000  /* ICS307 ref clk freq */
-
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_EON
-#define CONFIG_SPI_FLASH_SST
-
-#include "corenet_ds.h"
-
-#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
-#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
-#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
-#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
-
-/* There is a PCA9547 8-channel I2C-bus multiplexer on P3060QDS board */
-#define CONFIG_I2C_MUX
-#define CONFIG_I2C_MULTI_BUS
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index ad3622c..f4f9bd1 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -194,11 +194,7 @@
 #define CONFIG_DDR_SPD
 #define CONFIG_FSL_DDR3
 
-#ifdef CONFIG_P3060QDS
-#define CONFIG_SYS_SPD_BUS_NUM	0
-#else
 #define CONFIG_SYS_SPD_BUS_NUM	1
-#endif
 #define SPD_EEPROM_ADDRESS1	0x51
 #define SPD_EEPROM_ADDRESS2	0x52
 #define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1	/* for p3041/p5010 */
@@ -713,7 +709,7 @@
 
 #define CONFIG_BAUDRATE	115200
 
-#if defined(CONFIG_P4080DS) || defined(CONFIG_P3060QDS)
+#ifdef CONFIG_P4080DS
 #define __USB_PHY_TYPE	ulpi
 #else
 #define __USB_PHY_TYPE	utmi